Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
1
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
Вводная частьСодержание 3Company’s contact information 3History of the company 4
Electric Motors
3В and 3ВР 62В and 2ВР 10ВАО2-280, ВАО2-315 and ВАО2-355 13ВАО5П280 17ВАО5П450 20ВАО5П560 22ВАО5П630 24ВРК 26ВАОК 28ЭДК,ЭДКО 30ЭКВ,ЭДКВ 322ЭКВЭ4 402ЭДКОФ(В) and 3ЭДКОФ250 41ЭДКОФВ315 45ЭДКВФ 47ЭДСВФ 50ЭКВФ315 and ЭКВФТ315 52ЭДКВ400L12/4 542ВРМ, ВРМ280S4, 2BP2M280S4 55ВАСО5П 60ВАОКр 62
Interoperability with frequency converters
Characteristics of electric motors of series 3В,3ВР,2В,2ВР and ВАО2when powered from frequency converters Schneider Electric series Altivar 61 and Altivar 71 64
Contest
2
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
Dear Partners! Sirs and Madams!
You have a unique opportunity to get acquainted with one of the oldest companies in the field of electrical engineering -ALC “Pervomaysk Electromechanical Plant named after Karl Marx”. This is the enterprise that will celebrate its 140 anniversary in 2013. That is distinguished by its reliability and high quality of produced goods. That is awarded by many international awards.
Our plant specializes in the production of explosion-proof asynchronous electric motors for more than 70 years. Currently we produce over 15 kinds of electric motors of 400 frame sizes. Our products are well-known both in Ukraine and abroad.
It is impossible to imagine coal mining, oil and gas industry companies working without electric motors of ALC “Pervomaysk Electromechanical Plant named after Karl Marx”. Reliability of the
construction, quality of the design and technical excellence is our hallmark.I invite you to get acquainted with the products of our company.
Sincerely,President of ALC “PEMP named after Karl Marx”Candidate of Technical Sciences P.I. ZakharchenkoCandidate of Technical Sciences P.I. Zakharchenko
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
3
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
Company’s contact information
ALC “Pervomaysk Electromechanical Plant named after Karl Marx” leading Ukrainian enterprise - manufacturer of explosion-proof asynchronous electric motors.
Company Name:Full:Additional Liability Company “Pervomaysk Electromechanical Plant named after
Karl Marx”Abbreviated: ALC “PEMP named after Karl Marx”
Sphere of ActivitiesProduction of explosion-proof asynchronous electric motors having a capacity from
2,2kW to 2000kW, voltage - 380V, 400V, 415V, 440V, 500V, 660V, 1140V, 3000V, 6000V, 10000V.
Main Kinds of Manufactured ProductsElectric motors: 3В(ВР)112, 132, 160, 180, 200, 225; 2В(ВР)250, 280; ВАО2-280,
315, 355; ВАО5П280, 450, 560, 630; 2ЭДКОФ(В)250, 3ЭДКОФ250, ЭДКВФ250, 315, 355 (single-speed and double-speed);
also electric motors for gear system of shearers and tunneling machines in the salt and coal mines, electric motors for gear mechanisms that require soft start of mine winders and winches, belt conveyors (ВРК280, ВАОК315, 355, 450);
electric motors for gear systems of mine fans (2ВРМ 132, 160, 200, 225, 250, ВРМ280, 2ВР2М280);
electric motors for wharf cranes (ВАОКр); electric motors for gearless drive of air-cooling units (ВАСО5П). Electric motors can be produced in the following versions: Explosion-proof version: РВЗВ, РВЗВИа, РВ4В (mining), IExdllBT4 (oil-gas
chemical).Installation manner: IM1001, IM1081, IM2081, IM3011, IM 3081, IM4001, IM4011,
М9701, М9781.Version of climatic modification: У2,5, УХЛ1, УХЛ2, Т2,5.Also it is possible to produce electric motors according to clients specifications.
Year of Foundation: 1873Staff Quantity: 1300 peopleAddress: Zavodskoy lane, 1, Pervomaysk city, Luhansk region, Ukraine, 93202Tel./Fax: +38 (06455) 4-46-04, 4-58-00Website: www.pemz.com.uaE-mail: [email protected], [email protected]
President: Zakharchenko Petr Ivanovitch (4-58-00).
General Manager: Grin Gennadiy Michaylovitch (4-58-00).
Head of the Central Sales Department: Litovchenko Galina Grigoryevna (4-41-26, 4-44-96).
ALC “PEMP named after Karl Marx” - it is a brand name that has its recognition in Ukraine, Russia, CIS countries - the manufacturer of durable, reliable and safe electric motors. The company system of quality management is certified according to the interna-tional standard ISO 9001:2008.
4
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
History of the Company
The history of foundation of the “Pervomaysk Electromechanical Plant named after Karl Marx” as one of the largest manufacturers of electric motors in Ukraine dates since far 1873 year when the French businessman Ter constructed on the Luhan river bank a paper-mill producing packing paper for needs of neighboring mines.
In 1889 the factory was bought by Germans Bosse and Gennefeld, who changed its specialty into a mechanical factory of the mountain equipment. Seven years later Rudolf Gennefeld became the pro-prietor of the company, and production assortment included elevating steam winches, pumps for mines, cast-iron castings.
In May, 1920 the Soviet government made the decision on nationalization of the company and thus the factory was reoriented into casting and mechanical plant and was named after Karl Marx. The company began its work from restoration and development of the coal and chemical industry.
Since 1932 the factory was renamed into «Machine-Building Plant named after Karl Marx», and its production acquired the increasing recognition and authority among consumers.
The historical moment for the company was the 1935 year when pans and machineries were sent for the first time for export, at the same time the plant was mastering the production of winches, scrapers, pneumatic and manual stone and coal crushers, fans, pumps, Electric motor gears for coal lavas, reserve parts to coal cut-ters. Simultaneously there was performed the reconstruction of a boiler-house and machine-assembling department, the railway line and a water supply system were made.Development perspectives already became a reality, but the constructive labor of plant workers was interrupted by war.
In October, 1941 the plant was evacuated to Cheremkhovo, Irkutsk region where during the war there were produced mortar bombs, incendiary and aerial bombs, grenades - which production was mastered by the company within a month. Except defensive production, during the evacuation time there were produced pumps for shafts, chisel Electric motor gears, scraper and gear winches, and spare parts for machines and combines.
Immediately after the foundation of Pervomaisk city - on September, 3rd, 1943 the by the order of the People’s Commissariat of the electrotechnical industry of the USSR there was recreated “Pervomaysk Electromechanical Plant named after Karl Marx” which functions included reconditioning and restoration of the electric equip-ment flooded during war in shafts of Donbass - electric motors, transformers, starting and regulating instrumentations.
In 1946 the historical decision was taken to begin the production of flameproof electric motors which caused a new stage of re-equipment and reconstruction. Less than a year was required by technical department of the company for working out and producing of the first electric motors for an Electric motor gear of coal combines.
Since 1948 there have been fixed scientific and business relations with Makeyevka Scientific Research Institute, Donetsk “Dongiprouglemash” and “Giproniselektroshaht”, later - with UkrNIIVE, and regular work on creation and mastering of Electric Motors has begun.
In close cooperation of theorists and experts the plant’s products were improved year after year, tens of new asynchronous electric motors, hundreds of their modifica-tions were created.
From the end of 50th years of the last century the plant named after K. Marx became known as one of country leading enterprises on working out and producing of the flameproof and miner equipment for the largest industrial areas of Donbass, Kuzbas, Karaganda, Vorkuta, Situated near Moscow and other centers of development of the coal, oil refining and gas branches working in the conditions of explosion-proof manufacture.
Fixed improvement of constructions and techniques has allowed creating in the eighties at a factory series of modifications of the electric motors which are not
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
5
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
yielding on a technological level by best world sam-ples. Almost all names of produced goods (55,3 % - with the State Quality symbol) refer to perspective and are in great demand.
On peak of economic successes the factory staff met new trials. After dissolving of the USSR in 1991 and the following break of industrial links with the former republics has occurred and slump in production began to go deep, there was a crisis of mutual payments.
Today the oldest factory of Luhansk area ALC “PEMP named after Karl Marx”–one of the largest Ukrainian manufacturer offering to domestic and
foreign consumers more than 400 standard sizes of asynchronous flameproof electric motors of 15 series, power from 2,2 to 2000 kW of three classes of insulation with which are completed more than 80% of coal mining and tunneling combines, tape both chain-and-flight conveyors and series of other powerful mine gears.
The plant can strongly hold in the lead positions in the world market due to its high level of reliability in maintenance and quality of the produced goods which original passport is the international certificate ISO 9001:2008.
Now the long-term program of technical development of the production has come into force according to which almost all spectrums of the electric motors pro-duced earlier are subject to complete substitution. Already advanced achievements of domestic and foreign techniques are embodied in latest models, used modern isola-tion, magnetic conduit and structural materials.
Understanding huge responsibility for results of the work and taking care about the image of the factory, workers of the production are guided by a principle - to work quickly and qualitatively, to appear the safe partner in deliveries of flameproof asynchronous electric motors.
6
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
3В, 3
ВР
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
Electric Motors 3B, 3BP
Explosion-proof three-phase asynchronous Electric Motors with a short-circuited rotor of type 3В are intended for an Electric Motor gear of various machines and gears (pumps, fans, air engines, etc.) in explosive productions of internal and external installations oil refining, gas, chemical and other industries.
Explosion-proof three-phase asynchronous Electric Motors with a short-circuited rotor of type 3ВР are intended for an Electric motor gear of various machines and gears (pumps, fans, air engines, etc.) in the shafts dangerous under the contents of firedamp (methane) and finely pulver-ized coal.
Electric Motors 3В have version on explosion safety 1ExdIIBT4 in accordance with GOST 12.2.020 and GOST R 51330.0.
Electric Motors 3ВР have version on explosion safety РВ3ВИа on GOST 12.2.020 (home mar-ket), РВExdiaI in accordance with GOST R 51330.0 (export to Russia and the CIS countries) and ExdiaI in accordance with GOST 12.2.020 (export to other countries).
Electric Motors are produced according to specif ications of Technical Conditions ТУ У 3.09-00217159-033-97.
Aspect of a climatic modification and category of arranging of the Electric Motors produced for home market and export deliveries to the countries with a temperate climate - У2,5, for export deliveries to the countries with a damp and dry tropical climate - Т2,5 in accordance with GOST 15150.
Nominal operating mode of Electric Motors - S1 is in accordance with GOST 183 and GOST 28173. Operation of Electric Motors in modes S2, S3, S4 and S6 in accordance with GOST 183 and GOST 28173 is acceptable.
Electric Motors are oriented for operation from a circuit of three-phase alternate current by frequency 50Hz and 60Hz, voltage 380, 660 and 1140V, According to the customer’s request - 400, 415, 440 and 500V.
Operation of Electric Motors from frequency shifters is according to the additional agreement.
The binding of powers of electric motors to the adjusting-connecting sizes corresponds to GOST 28330 (РС 3031-71).
Protection index of Electric Motors from external effects - IР54 in accordance with GOST 17494, protection index of the fan from air input - IР20 in accordance with GOST 17494.
Electric Motors have class insulation of thermal resistance F and Н in accordance with GOST 8865.
Electric Motors have the following versions on a mounting mode: - 3В112, 3ВР112 - IM1081, IM2081, IM3081, IM1082 in accordance with GOST 2479; - 3В132, 3ВР132 - IM1081, IM2081, IM3081, IM3011, IM1082 in accordance with GOST 2479; - 3В160, 3ВР160, 3В180, 3ВР180 - IM1081, IM4081, M9781 in accordance with GOST 2479; - 3В200, 3ВР200, 3В225, 3ВР225 - IM1001, IM4001, M9701 in accordance with GOST 2479,
operation of Electric Motors with angles of inclination of a direct-axis to ± 30° is meanwhile accepted.
Cooling method of Electric Motors - IСA 0141 is in accordance with GOST 20459. The weight of Electric Motors and specifications for a nominal operating mode at frequency 50Hz
are given in Table 1.1. The weight of Electric Motors is given for version IM1081 (IM1001). The overall, mounting and connection dimensions of Electric Motors are given on Figures
1.1 - 1.3 and in Table 1.2.
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
7
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
3В, 3ВРTable 1.1. - Specifications of Electric Motors 3, 3
Electric MotorType
NominalWattage,
kW
SynchronousVelocity,r/min
Slidingmotion,
%
At nominal load
Output-InputRatio,%
cos
max
Mnom
start
Mnom
IstartInom
InertiaMoment,kg m2
Weight,kg
3, 31122 7,5 3000 4,2 88,0 0,90 3,1 2,4 7,0 0,015 98
3, 3112M4 5,5 1500 4,0 87,0 0,84 2,8 2,3 0,025 96
3, 3112MA6 3,0 1000 5,5 80,0 0,79 2,0 5,1 0,027 89
3, 3112MB6 4,0 5,6 82,6 0,78 2,2 5,6 0,034 96
3, 3112MA8 2,2 750 5,0 75,0 0,70 1,9 5,0 0,027 88
3, 3112MB8 3,0 6,7 77,2 0,71 2,4 4,9 0,034 95
3, 3132M2 11,0 3000 3,3 88,0 0,90 3,2 6,5 0,028 132
3, 3132S4 7,5 1500 3,4 87,5 0,86 2,2 7,2 0,043 116
3, 3132M4 11,0 3,9 0,87 2,4 6,7 0,051 122
3, 3132S6 5,5 1000 4,0 86,3 0,80 2,8 2,1 6,5 0,055 110
3, 3132M6 7,5 86,5 3,0 2,3 0,070 134
3, 3132S8 4,0 750 5,4 84,0 0,70 2,5 1,8 5,0 0,055 114
3, 3132M8 5,5 82,0 0,73 2,6 0,070 134
3, 3160S2 15,0 3000 2,6 89,5 0,89 6,0 0,065 258
3, 3160M2 18,5 90,0 0,90 0,090 258
3, 3160S4 15,0 1500 2,5 0,84 2,7 2,2 6,7 0,125 259
3, 3160M4 18,5 2,6 90,5 0,85 2,6 6,5 0,160 272
3, 3160S6 11,0 1000 2,4 88,0 0,82 2,1 6,2 0,225 245
3, 3160M6 15,0 2,7 89,0 2,8 6,0 0,290 270
3, 3160S8 7,5 750 2,5 87,0 0,75 2,0 0,225 250
3, 3160M8 11,0 2,7 5,5 0,290 270
3, 3180S2 22,0 3000 2,2 87,0 0,89 2,5 1,8 7,5 0,190 335
3, 3180M2 30,0 88,0 0,240 370
3, 3180S4 22,0 1500 2,4 89,1 0,83 2,6 2,0 0,230 330
3, 3180M4 30,0 90,0 0,85 0,300 360
3, 3180M6 18,5 1000 2,2 88,0 0,81 2,4 7,0 0,500 360
3, 3180M8 15,0 750 2,8 87,0 0,75 2,0 1,7 5,0
3, 3200M2 37,0 3000 1,8 88,0 0,85 2,6 1,8 7,5 0,260 395
3, 3200L2 45,0 1,9 89,0 0,88 1,9 0,290 415
3, 3200M4 37,0 1500 2,2 90,0 0,85 2,5 2,2 7,0 0,420 395
3, 3200L4 45,0 2,3 90,5 0,86 2,6 2,5 0,490 420
3, 3200M6 22,0 1000 1,9 88,5 0,75 2,4 2,0 0,660 395
3, 3200L6 30,0 89,0 0,84 2,3 6,5 0,850 430
3, 3200M8 18,5 750 2,4 87,0 0,77 1,9 1,7 5,0 0,650 395
3, 3200L8 22,0 2,3 88,0 0,76 2,0 1,8 5,5 0,860 430
3, 3225M2 55,0 3000 1,9 90,0 0,87 3,0 2,0 7,5 0,350 455
3, 3225M4 1500 2,2 90,5 0,85 2,6 2,6 0,600 475
3, 3225M6 37,0 1000 2,1 89,0 2,2 2,0 6,0 1,050 475
3, 3225M8 30,0 750 2,5 88,0 0,79 1,9 1,7 5,0
1000
750
1500
1000
750
3000
1500
87,5
4,0
5,4
2,6
2,8
2,2
3,2
3,2
1,9
1,9
2,6
2,6
1,8
1,8
1,8
1000
750
3000
1500
3000
1500
1000
750
1,9
2,4
2,2
87,0
90,0
0,82
0,75
2,6
2,2
6,0
5,0
6,5
7,5
2,0
7,0
7,0
7,5
7,5
7,5
1,8
2,0
2,0
2,6
2,5
2,8
2,8
2,1
2,0
2,6
0,80
0,500 360
2,0
7,0
7,5
1,050 475
0,85
55,0
0,89
6,0
8
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
3В, 3
ВР
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
Table1.2.
-Ove
rall,
mou
ntingan
dco
nnectio
ndimen
sion
sof
ElectricMotors3
,3
d 1d 2
d 10d 2
0d 2
2d 2
4d 2
5d 3
0n
20
21
ll 1
l 2l 1
0l 2
0l 2
1l 3
0l 3
1l 3
3l 3
9b 1
b 2b 1
0B
hh 1
h 2h 5
h 6h 1
0h 3
1
3,3
112M
2
32
2812
26515
300230273
4-
45
-
8060
140
416
0,5
52070
595
0
108
190
-
112
87
35
31
15+1
,5-2
380
3,3
112M
43
,3
112M
A6
3,3
112M
B63
,3
112M
A8
3,3
112M
B83
,3
132M
2
38300
19
350250311
620
178
5
261,5
575
89
640
216
132
4113
+1,5
-2415
3,3
132S
4580
140
535
600
3,3
132M
4620
178
575
640
3,3
132S
6580
140
535
600
3,3
132M
6620
178
575
640
3,3
132S
8580
140
535
600
3,3
132M
8620
178
575
640
3,3
160S
242
-
15
350
400300400
-
110
-
38,5+0
,6-1,32
770108
-
12
-
254
160
-
45
-
17+0
,83
-1,35520
3,3
160M
2210
3,331
60S4
48
178
149
52
3,3
160M
4210
3,3
160S
6178
3,3
160M
6210
3,3
160S
8178
3,3
160M
8210
3,3
180S
2
400
450350450
822
30'-
203
49+0
,15
-2,45
880
121
279420180
18+2 -2,5
580
3,3
180M
2241
930
3,3
180S
4
55
203
835
1610
59
3,3
180M
4241
880
3,3
180M
63
,3
180M
83
,3
200M
2
19500
550450500
267
222,15
840
133
318
500
200
16+2 -2,5
625
3,3
200L
2305
875
3,3
200M
4
60
267
830
18
1164
3,3
200L
4305
870
3,3
200M
6267
830
3,3
200L
6305
870
3,3
200M
8267
830
3,3
200L
8305
870
3,3
225M
255
110
311
910
149
356
225
1059
650
3,3
225M
465
140
905
1169
3,3
225M
63
,3
225M
8
140
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
9
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
3В, 3ВР
l1 l10l31
b10
h
4 port. d10
l1 l10l31
h
4 port d10
d 25
h 31
d24
h 31
l30
l30
l39
l20
d24
h 31
b10
n port d22
l21
n port d2221
21
d20
d20
d 30 20
l2
l33
h 10h 10
Figure 1.1. Versions IM1001, IM1081 and IM1082
Figure 1.2. Versions IM2081, M9701 and M9781
Figure 1.3. Versions IM3011, IM3081, IM4001 and IM4081( l for version IM3011)
d 30
l1
d 25
d 30
l
l39
l20
l21
l30
Figure 1. Overall, mounting and connection dimensions of Electric Motors 3, 3
h 1b1
h 5
d1
h 2b2
h 6
d2
/2
10
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
2В, 2
ВР
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
Electric Motors 2В, 2ВР
Explosion-proof three-phase asynchronous Electric Motors with a short-circuited rotor of type 2В are intended for an Electric Motor gear of stationary machines and gears (pumps, fans, air engines, etc.) in explosive productions of internal and external installations used in oil refining, gas, chemical and other industries.
Explosion-proof three-phase asynchronous Electric Motors with a short-circuited rotor of type 2ВР are intended for an Electric Motor gear of stationary machines and gears (pumps, fans, air engines, etc.) in the shafts dangerous under the contents of firedamp (methane) and finely pulver-ized coal.
Electric Motors 2В have version on explosion safety 1ExdIIBT4 in accordance with GOST 12.2.020 and GOST R 51330.0.
Electric Motors 2ВР have version on explosion safety РВ3ВИа in accordance with GOST 12.2.020 (home market), РВExdI in accordance with GOST R 51330.0 (export to Russia and the CIS countries) and ExdI in accordance with GOST 12.2.020 (export to other countries).
Electric Motors are produced according to specif ications of Technical Conditions ТУ У 31.1-05758925-011:2006.
Aspect of a climatic modification and category of arranging of the Electric Motors produced for home market and export deliveries to the countries with a temperate climate - У2,5, for export deliveries to the countries with a damp and dry tropical climate - Т2,5, in areas with a frigid cli-mate - УХЛ2,5 in accordance with GOST 15150.
Nominal operating mode of Electric Motors - S1 is in accordance with GOST 183 and GOST 28173. Operation of Electric Motors in modes S2, S3, S4 and S6 in accordance with GOST 183 and GOST 28173 is acceptable.
Electric Motors are oriented for operation from a circuit of three-phase alternate current by frequency 50 and 60Hz, voltage 380, 660 and 1140V, According to the customer’s request - 400, 415, 440 and 500V.
Operation of Electric Motors from frequency shifters is according to the additional agreement.
The binding of powers of electric motors to the adjusting-connecting sizes corresponds to GOST 28330 (РС 3031-71).
Protection index of Electric Motors from external effects - IР54 is in accordance with GOST 17494, protection index of fan from air input - IР20 is in accordance with GOST 17494.
Electric Motors have class insulation of thermal resistance F and Н in accordance with GOST 8865.
Versions on a mounting mode - IM1001, IM1002, IM4001, M9701, and IM4011 are in accor-dance with GOST 2479.
The terminal box of Electric Motors has to be fixed from the right side if to take a detached view from the appearing end of the shaft. The sharp turn of a terminal box on an edge, divisible by 90° is acceptable.
Cooling method of Electric Motors - ICA0141 is in accordance with GOST 20459. The weight of Electric Motors and specifications for a nominal operating mode at frequency
50Hz and voltage 660V are given in Table 2.1. The weight of Electric Motors is given for version IM1001.
The overall, mounting and connection dimensions of Electric Motors are given on Figures 2.1-2.3 and in the Table 2.2.
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
11
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
2В, 2ВР
Elec
tric
Mot
orTy
pe
Nom
inal
Wat
tage
,kW
Sync
hron
ous
Vel
ocity
,r/m
inSl
iding
Moti
on,
%
Atn
omin
allo
ad
Inpu
t-O
utpu
tR
atio
,%co
s
m
ax
Mno
m
st
art
Mno
m
I star
t
I nom
Iner
tiaM
omen
t,kg
m2
Wei
ght,
kg
2,2
250S
275
3000
0,83
92,2
0,90
2,5
1,7
7,0
0,87
640
2,2
250M
290
3000
0,83
92,5
0,91
2,7
1,7
1,10
695
2,2
280S
22
,2
250M
82
,2
250S
82
,2
250M
62
,2
250S
62
,2
250M
42
,2
250S
4
110
453755459075
3000
750
750
1000
1000
1500
1500
1,20
2,00
2,00
1,50
1,50
1,00
1,00
93,4
91,0
90,5
92,2
91,6
92,5
92,0
0,90
0,80
0,80
0,87
0,87
0,90
0,89
1,6
1,8
1,7
2,0
1,8
2,2
2,2
7,0
5,0
5,0
6,0
6,0
7,0
7,0
1,38
2,40
2,00
2,40
2,00
2,00
1,70
862
725
650
725
650
725
650
2,2
280S
411
01,
0093
,80,
903,
06,
82,
9389
22
,2
280S
675
1,50
0,86
1,7
5,8
3,64
845
2,2
280M
690
1000
1,50
93,4
0,87
2,6
1,7
5,8
4,26
905
2,2
280S
855
92,4
0,83
2,5
4,13
845
2,2
280M
875
750
2,00
92,6
0,84
5,5
4,74
905
1500
1000
750
93,2
2,00
3,0
2,1
2,1
2,5
2,3
2,5
2,5
2,5
2,1
2,5
1,6
1,6
5,5
7,0
Tabl
e2.
1.-S
peci
ficat
ions
ofE
lect
ricM
otor
s2B
,2B
P
Tabl
e2.
2.-O
vera
ll,m
ount
ing
and
conn
ectio
ndi
men
sion
sof
Elec
tric
Mot
ors
2,2
Elec
tric
Mot
orTy
ped 1
d 2d 10
d 20d 22
d 24d 25
d 30l
l 1l 2
l 10l 20
l 21l 30
l 31l 33
l 39b 1
b 2b 10
b 31h
h 1h 2
h 5h 6
h 31h 10
2,2
250S
265
6524
600
2466
055
059
6
1120
140
140
311
60,
1545
1040
168
1190
03
18
18
406
500
250
11
11
69
69
630
18+2 -2
,5
2,2
250M
211
7034
910
902
,2
250S
4
75
311
1040
2012
79,5
2,2
250M
42
,2
250S
6,8
1120
311
1040
2,2
250M
6,8
349
2,2
280S
270
1190
368
1110
190
1260
457
545
280
74,5
675
2,2
280S
412
2017
011
4014
852
,2
280S
6,8
802
,2
280M
6,8
419
1120
349
1170
1090
2219
+2 -2,6
1240
1190
1240
1190
1240
1290
12
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
2В, 2
ВР
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
b10
l1
l20
l39
l21
l30
d 25
2230'
d20
d24 303
0'
8 port d22
l
Figure 2.1. Versions IM1001 and IM1002
Figure 2.2. Version M9701
Figure 2.3. Versions IM4001 and IM4011( l for Version IM4011)
l30
l1 l31 l10
h
303
0'
b31
4 port d10
h 10
d 30
l30
l1
l20 l21
l39
l31 l10
d 25
b10
h
2230'
h 31
b318 port d22
h 10
303
0'
4 port d10
d24
d20
Figure 2. Overall, mounting and connection dimensions of Electric Motors 2, 2
h 1 b1
h 5
d1
l2
h 2 b2
h 6
d2
l33
d 30
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
13
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
ВАО2-280, 315, 355Electric Motors ВАО2-280, ВАО2-315 and ВАО2-355
Explosion-proof three-phase asynchronous Electric Motors with a short-circuited rotor of type BAO2 are intended for an Electric Motor gear of stationary machines and gears (pumps, fans, air engines, etc.) in the shafts dangerous under the contents of firedamp (methane) and finely pulverized coal, and also in explosive productions of internal and external installations used in oil refining, gas, chemical and other industries.
Electric Motors BAO2 have the following versions on explosion safety: РВ3ВИа and 1ExdIIBT4 in accordance with GOST 12.2.020 (home market), РВExdI and 1ExdIIBT4 in accordance with GOST R 51330.0 (export to Russia and the CIS countries), ExdI and 1ExdIIBT4 in accordance with GOST 12.2.020 (export to other countries).
Electric Motors are produced according to specifications of Technical Conditions ТУ У 31.1-05758925010:2006.
Aspect of a climatic modification and a category of arranging of the Electric Motors produced for home market and export deliveries to the countries with a temperate climate - У2,5, for export deliveries to the countries with a damp and dry tropical climate - Т2,5, for export deliveries to the countries with a frigid climate - УХЛ1, УХЛ2,5 are in accordance with GOST 15150.
Nominal operating mode of Electric Motors - S1 is in accordance with GOST 183 and GOST 28173.
Electric Motors are oriented for operation from a circuit of three-phase alternate current by fre-quency 50 and 60Hz. Electric Motors power to 200kW are produced on voltages 380, 660 380/660 and 1140/660V, Electric Motors by power from above 200kW - on voltages 660 and 1140/660V. According to the customer’s request, at frequency of 50 Hz Electric Motors by power to 200kW can be produced on voltages 400, 415, 440 and 500V, and Electric Motors by power to 250kW - on voltages 440 and 500V. At frequency 60Hz Electric Motors by power to 200kW can be produced on voltages 380/660 and 440V, and Electric Motors by power to 250kW - on voltages 440V.
Operation of Electric Motors from frequency shifters is according to the additional agreement.
Protection index of Electric Motors from external effects - IP54 is in accordance with GOST 17494 and GOST 14254, a protection index of the external fan from air input - IP20 is in accordance with GOST 17494 and GOST 14254.
Electric Motors have class insulation of thermal resistance F and Н in accordance with GOST 8865.
Versions on a mounting mode - IM1001, IM4001, M9701, IM4011 are in accordance with GOST 2479.
The terminal box of Electric Motors has to be fixed from the right side if to take a detached view from the appearing end of the shaft. The sharp turn of a terminal box on an edge, divisible by 90° is acceptable.
Cooling method of Electric Motors - ICA0151 is in accordance with GOST 20459. The weight of Electric Motors and specifications for a nominal operating mode at frequency
50Hz and voltage 660V are given in Table 3.1. The weight of Electric Motors is given for Versions IM1001.
The overall, mounting and connection dimensions of Electric Motors are given on Figures of 3.1-3.3 and in Table 3.2.
14
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
ВАО2
-280
, 315
, 355
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
Electric MotorType
NominalWattage,
kW
SynchronousVelocity,
r/minSliding
motion,%
At nominal load
Output-InputRatio,% cos
max
Mnom
start
Mnom
Istart
Inom
InertiaMoment,kg m2
Weight,kg
2-280S2 132 3000 1,3 93,4 0,90 2,7 1,6 6,5 1,71 10202-280M2 160 3000 1,3 93,8 0,91 2,7 1,7 1,99 10702-280L2 200 3000 1,3 94,0 0,91 1,7 7,0 2,29 11302-280S4 132 1,3 93,9 0,88 2,6 6,5 3,31 10202-280M4 160 1500 1,3 94,0 0,89 2,0 6,5 3,57 10702-280L4 200 1,3 94,3 0,89 2,7 6,5 4,33 11302-280M6 110 1000 1,4 93,5 0,87 2,3 6,0 4,08 10702-280L6 132 1000 1,4 93,8 0,87 1,6 6,0 5,10 11302-280M8 90 1,7 0,83 1,6 5,5 4,59 10702-280L8 110 750 1,7 93,0 0,83 2,3 1,7 5,5 5,61 11302-280M10 55 92,0 2,2 1,5 4,59 10702-280L10 75 600 1,7 92,3 0,73 2,2 1,5 5,0 5,61 11302-315M2 250 94,2 0,91 2,8 2,96 14002-315L2 315 3000 1,2 94,7 0,91 7,0 3,67 16002-315M4 250 94,6 0,89 5,61 14752-315L4 315 1500 1,1 0,89 2,5 1,8 6,5 6,88 16452-315M6 160 1,2 94,0 0,87 2,2 5,8 7,14 14752-315L6 200 1000 1,2 94,5 0,88 1,6 5,8 8,66 16452-315M8 132 1,3 93,6 2,2 5,5 8,92 14752-315L8 160 750 1,3 94,0 0,85 1,5 10,83 16452-315S10 90 1,2 5,0 7,65 13852-315M10 110 600 1,2 93,5 0,77 2,3 1,4 5,0 8,92 14752-315L10 132 93,5 10,83 16452-3556 250 1000 1,0 95,0 0,88 2,2 1,7 13,25 19002-355L6 315 95,4 0,88 18,60 21502-3558 200 750 0,8 94,2 0,85 2,3 6,0 16,56 19002-355L8 250 750 0,8 94,6 0,85 2,3 1,5 6,02-35510 160 600 0,8 94,0 0,77 2,3 1,5 6,0 16,56 19002-355L10 200 0,8 94,5 0,78 1,4 20,64 2150
1500
1500
750
600
3000
1500
1000
92,8
1,7
1,2
1,1
2,8
2,7
2,32,2
2,21,6
2,82,5
1,51,61,7
750
600
600
1000
600
1,0
1,3
93,0
94,7
0,85
0,76
2,21,6
6,3
7,0
5,0
6,0
5,06,06,0
1,4
1,61,5
2,2
2,2
2,32,3
1,5
1,4
2,2
0,73
20,64 2150
2,0
7,0
0,78
5,5
Table 3.1. - Specifications of Electric Motors 2-280, 2-315 and 2-355
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
15
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
ВАО2-280, 315, 355Table 3.2. - Overall, mounting and connection dimensions of Electric Motors
2-280, 2-315 and 2-355
Electric MotorType
d1 d10 d20 d22 d24 d25 d30 l l1 l10 l20 l21 l30 l31 l39 b1 b10 b31 h h1 h5 h10 h31
2-280S275
24 600
24
660 550 650
1315140
368
60,15
45
1230
190
04
20
457 600 280
12 79,5
23+2-2,6 640
2-280M2 4192-280L2 1390 457 13052-280S4
80
1315
170
3681230
22 14 85
2-280M4 4192-280L4 1390 457 13052-280M6 1315 419 12302-280L6 1390 457 13052-280M8 1315 419 12302-280L8 1390 457 13052-280M10 1315 419 12302-280L10 1390 457 13052-315M2
75
28
740 800 680 768
1340140
457
55
1255
216
20
508 630 315
12 79,5
23+2-3 715
2-315L2 1410 508 13252-315M4
90
1390
170
457 1305
25 14 95
2-315L4 1460 508 13752-315M6 1390 457 13052-315L6 1460 508 13752-315M8 1390 457 13052-315L8 1460 508 13752-315S10 1390
4571305
2-315M10 1390 13052-315L10 1460 508 13752-355M6
100 838 - 210
560 1495
254 28 610 640 355 16 106 28+2-3 795
2-355L6 630 15752-355M8 560 14952-355L8 630 15752-355M10 560 14952-355L10 630 1575
- - - -- -
16
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
ВАО2
-280
, 315
, 355
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
b10
l1
l20
l39
l21
l30
d 25
2230'
d20
d24 223
0'
8 port d22
l
Figure 3.1. Version IM1001
Figure 3.2. Version M9701
Figure 3.3. Versions IM4001 and IM4011( l for Version IM4011)
l30
l1 l31 l10
h
223
0'
b31
4 port d10
h 10
d 30
l30
l1
l20 l21
l39
l31 l10
d 25
b10
h
2230'
h 31
b318 port d22
h 10
223
0'
4 port d10
d24
d20
Figure 3. Overall, mounting and connection dimensions of Electric Motors2-280, 2-315 and 2-355
h 1 b1
h 5
d1
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
17
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
ВАО5П280Electric Motors ВАО5П280
Explosion-proof three-phase asynchronous Electric Motors with a short-circuited rotor of type BAO5П280 are intended for an Electric Motor gear of stationary machines and gears (pumps, fans, etc.) in the shafts dangerous under the contents of firedamp (methane) and finely pulverized coal, and also in explosive productions of internal and external installations used in oil refining, gas, chemical and other industries. Electric Motors are developed instead of Electric Motors BAO2-280 and 2В(P)280.
Electric Motors ВАО5П280 have the following versions on explosion safety: РВ3ВИа and 1ExdIIBT4 in accordance with GOST12.2.020 (home market), РВExdI and 1ExdIIBT4 in accor-dance with GOST R 51330.0 (export to Russia and the CIS countries), ExdI and 1ExdIIBT4 in accordance with GOST 12.2.020 (export to other countries).
Electric Motors are produced according to specifications of Technical Conditions.Aspect of a climatic modification and a category of arranging of the Electric Motors produced
for home market and export deliveries to the countries with a temperate climate - У2,5, for export deliveries to the countries with a damp and dry tropical climate - Т2,5, for export deliveries to the countries with a frigid climate - ХЛ 2,5 in accordance with GOST 15150.
Nominal operating mode of Electric Motors - S1 is in accordance with GOST 183 and GOST 28173.
Electric Motors are oriented for operation from a circuit of three-phase alternate current by frequency 50Hz, voltage 380, 660 and 1140V.
Electric Motor of Version РВ3ВИа have fixed thermorelays (thermoclippers) on the stator wind-ings, by request all Electric Motors in the end shields can have fixed temperature transmitters (Version Т1) which output wires are lead to a terminal box.
Operation of Electric Motors from frequency shifters is according to the additional agreement.
Protection index of Electric Motors from external effects - IP54 is in accordance with GOST 17494, protection index of the external fan from air input - IP20 is in accordance with GOST 17494.
Electric Motors have class insulation of thermal resistance H in accordance with GOST 8865.Constructive Version of Electric Motors on a mounting mode - IM1001, IM4001, IM4011,
M9701 is in accordance with GOST 2479.The terminal box of Electric Motors has to be fixed from the right side if to take a detached
view from the appearing end of the shaft. According to the customer’s request Electric Motors can be produced with the terminal box located at the left.
Cooling method of Electric Motors - IC0141 is in accordance with GOST 20459.The weight of Electric Motors and specifications for a nominal operating mode are given in
Table 4.1. The overall, mounting and connection dimensions of Electric Motors are given on Figure 4 and in Table 4.2.
18
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
ВАО5
П280
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
Electric MotorType .
5280SA2
5.1
5280SB25280SA45280SB45280S65280S8
h b10l1 l10 l31 d10 l39 l30 l d20 l20 l21 h10 b11 b32 b31 h31 d1 b1 h1 h5
280 457
140
368
190 24 04
1030 1110
600 6 45 25 580 316
520 615
75,(70*)20 12 79,5
75
1060 1140 80 22 14 85
5280M25280M45280MA65280MB65280MA8
5280L105280L85280L65280L45280L25280M105280MB8
419
1080 1160555 645
75 20 12 79,5
1110 1190 80 22 14 85520 615
520 6151210 1290 80 22 14 85
457
1180 1260555 645
75 20h 12 79,5
170
140
170
140
170
5280S2*
5280L2
5280L652806*52806*5280S6*5280L45280M45280SB4*5280SA4*
528025280S2* 132
160200
1321109075200160132110
110 1,23000
1,03000
1,210001,210001,210001,210001,315001,315001,315001,31500
1,330001,33000
93,4
94
94,294,093,893,595,094,594,194
93,893,4
0,91
0,93
0,880,880,880,870,890,890,890,89
0,930,91
1,5
2,0
1,61,61,51,52,52,22,02,0
1,61,5
3,2
4,0
2,52,52,52,53,53,03,03,0
3,53,5
7,0 1,03 828 828 828 840
7,5 1,64 983 983 983 997
6,0 3,66 967 967 967 9806,0 2,71 853 853 853 8676,0 2,71 842 842 842 8566,0 2,34 798 798 798 8107,5 3,41 1010 1010 1010 10247,0 2,16 919 919 919 9337,0 2,15 841 841 841 8537,0 2,15 840 840 840 853
7,0 1,25 907 907 907 9217,0 1,03 832 832 832 844
Electric MotorType
NominalWattage,kW
SynchronousVelocity,r/min
Slidingmotion,%
At nominal loadOutput-InputRatio,%
cos
max
Mnom
start
Mnom
IstartInom
InertiaMoment,kg m2
Weight, kg
M9701IM1001 IM4001 IM4011
5280L10*5280M10*5280L8*52808*52808*5280S8*
7555110907555
1,76001,76001,37501,37501,37501,3750
92,892,593,593,293,092,8
0,770,770,840,830,830,83
1,41,41,401,41,61,6
2,42,42,22,22,52,5
5,0 4,42 915 9319159155,0 3,23 811 8258118115,4 4,17 963 9799639635,4 3,08 884 8988848845,5 3,08 860 8738608605,5 2,66 810 822810810
Table 4.1. - Specifications of Electric Motors 5280
Table 4.2. - Overall, mounting and connection dimensions of Electric Motors 5280
-*Terminal box with one power cable input.
-*according to the order.
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
19
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
ВАО5П280
b1
h 1h 5
d1
Figure 4. Overall, mounting and connection dimensions of Electric Motors 5280
4 port d10
4 port d10
Figure 4.1. Overall, mounting and connection dimensions of Electric Motors5280 of Version IM1001
Figure 4.3. Overall, mounting and connection dimensions of Electric Motors5280 of Version M9701
Figure 4.2. Overall, mounting and connection dimensions of Electric Motors5280 of Version IM4001 and IM4011
l30
l1 l39
l20
223
0'
550
l21
b31 max
l10l31
d20
660
b10
b11
h 10
8port 24
l30
l1 l39
l20 660
d20
223
0'
550
l21
l
b31 max
8 port 242230'2230'
b32 b31 max
h 31
h
bb10
b11
h 10
l10l31l1
l30
2230'
h
2230'2230'
20
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
ВАО5
П450
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
Electric Motors 5450
Electric MotorType
NominalWattage,
kW
SynchronousVelocity,
r/minSlidingmotion,
%
At nominal loadOutput-Input
Ratio,%
cos,..
max
Mnom,
o.e.
start
Mnom,
o.e.
Istart
Inom,
..
InertiaMoment,kg m2
Weight,kg
Explosion-proof three-phase asynchronous Electric Motors with a short-circuited rotor of typeBAO5450 are intended for an Electric Motor gear of stationary machines and gears (pumps, fans, etc.) inthe shafts dangerous under the contents of firedamp (methane) and finely pulverized coal, and also inexplosive productions of internal and external installations used in oil refining, gas, chemical and otherindustries.
Electric Motors 5450 have the following versions on explosion safety: 4 and 1ExdIIBT4in accordance with GOST 12.2.020 (home market), ExdI and 1ExdIIBT4 in accordance withGOST R 51330.0 (export to Russia and the CIS countries), ExdI and 1ExdIIBT4 in accordance withGOST 12.2.020 (export to other countries).
Electric Motors are produced according to specifications of Technical Conditions 31.1-05758925-004-2003.Aspect of a climatic modification and a category of arranging of the Electric Motors produced for home
market and export deliveries to the countries with a temperate climate - 2,5, for export deliveries to thecountries with a damp and dry tropical climate - 2,5 in accordance with GOST 15150.
Nominal operating mode of Electric Motors - S1 is in accordance with GOST 183 and GOST 28173.Electric Motors are oriented for operation from a circuit of three-phase alternate current by voltage 6000V
and frequency 50Hz, and according to the customer's request on 10kW with power lowering on one gradeand frequency 50Hz.
Operation of Electric Motors from frequency shifters is according to the additional agreement.Protection index of Electric Motors from external effects - IP54 is in accordance with GOST 17494,
protection index of the external fan from air input - IP20 is in accordance with GOST 17494.Electric Motors have class insulation of thermal resistance F with usage on a class of thermal resistance B
in accordance with GOST 8865.Constructive version of Electric Motors on a mounting mode - IM1001 is in accordance with GOST 2479.The terminal box of Electric Motors has to be fixed from the right side if to take a detached view from
the appearing end of the shaft. According to the customer's request Electric Motors can be produced withthe terminal box located at the left.
Cooling method of Electric Motors - IC0151 is in accordance with GOST 20459.The weight of Electric Motors and specifications for a nominal operating mode are given in Table 5.1.The overall, mounting and connection dimensions of Electric Motors are given on Figure 5 and in
Table 5.2.
Table 5.1. - Specifications of Electric Motors 5450
5450SA-25450SB-25450SC-25450M-25450SA-45450SB-45450M-45450L-45450S-65450M-65450L-65450M-85450L-8
200250315400200250315400200250315200250
30003000300030001500150015001500100010001000750750
0,70,690,650,611,10,980,860,770,920,810,870,90,9
93,293,994,695,294,294,895,495,794,895,395,694,995,2
0,880,890,900,910,880,890,900,900,830,840,840,780,78
3,23,23,53,82,12,32,73,02,02,32,12,02,1
1,0 6,7 2,3 16501,1 6,8 2,7 18201,3 7,6 3,4 20001,5 8,6 4,8 24801,0 6,0 5,6 16331,0 5,2 6,9 18501,2 6,0 9,3 22371,4 6,8 12,3 27121,0 4,8 9,6 18401,3 5,4 12,6 22021,2 5,3 16,0 26021,2 4,4 12,9 22361,3 4,7 16,2 2630
Electric Motors ВАО5П450
Explosion-proof three-phase asynchronous Electric Motors with a short-circuited rotor of type BAO5П450 are intended for an Electric Motor gear of stationary machines and gears (pumps, fans, etc.) in the shafts dangerous under the contents of firedamp (methane) and finely pulverized coal, and also in explosive productions of internal and external installations used in oil refining, gas, chemical and other industries.
Electric Motors ВАО5П450 have the following versions on explosion safety: РВ4В and 1ExdIIBT4 in accordance with GOST 12.2.020 (home market), РВExdI and 1ExdIIBT4 in accor-dance with GOST R 51330.0 (export to Russia and the CIS countries), ExdI and 1ExdIIBT4 in accordance with GOST 12.2.020 (export to other countries).
Electric Motors are produced according to specifications of Technical Conditions ТУ У 31.1-05758925-004-2003.
Aspect of a climatic modification and a category of arranging of the Electric Motors pro-duced for home market and export deliveries to the countries with a temperate climate - У2,5, for export deliveries to the countries with a damp and dry tropical climate - Т2,5 in accordance with GOST 15150.
Nominal operating mode of Electric Motors - S1 is in accordance with GOST 183 and GOST 28173. Electric Motors are oriented for operation from a circuit of three-phase alternate current by voltage 6000V and frequency 50Hz, and according to the customer’s request on 10kW with power lowering on one grade and frequency 50Hz.
Operation of Electric Motors from frequency shifters is according to the additional agreement.
Protection index of Electric Motors from external effects - IP54 is in accordance with GOST 17494, protection index of the external fan from air input - IP20 is in accordance with GOST 17494.
Electric Motors have class insulation of thermal resistance F with usage on a class of thermal resistance B in accordance with GOST 8865.
Constructive version of Electric Motors on a mounting mode - IM1001 is in accordance with GOST 2479.
The terminal box of Electric Motors has to be fixed from the right side if to take a detached view from the appearing end of the shaft. According to the customer’s request Electric Motors can be produced with the terminal box located at the left.
Cooling method of Electric Motors - IC0151 is in accordance with GOST 20459. The weight of Electric Motors and specifications for a nominal operating mode are given in
Table 5.1. The overall, mounting and connection dimensions of Electric Motors are given on Figure 5
and in Table 5.2.
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
21
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
ВАО5П450
l10l1 l31l30
4 port d10
Figure 5. Overall, mounting and connection dimensions of Electric Motors5450
b10
b11
h 31
b31b32
hh 1
0
h 1
b1
h 5
d1
Table 5.2. - Overall, mounting and connection dimensions of Electric Motors5450
Electric motorType h l1 b10 l10 l31 d10 l30 h10 b11 b32 b31 h31 d1 b1 h1 h5
5450SA-2
450
140
750
560
315 35
1290
26 850 430 795 990
70 20 12 74,55450SB-25450SC-2 13605450M-2 710 14905450SA-4
210
560 1393
100 28 16 106
5450SB-4 14635450M-4 710 15935450L-4 800 17535450S-6 560 14635450M-6 710 15935450L-6 800 17535450M-8 710 15935450L-8 800 1753
22
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
ВАО5
П560
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
Electric Motors 5560
Electric MotorType
NominalWattage,
kW
SynchronousVelocity,
r/minSlidingmotion,
%
At nominal loadOutput-Input
Ratio,%
cos,..
max
Mnom,
o.e.
start
Mnom,
o.e.
Istart
Inom,
..
InertiaMoment,kg m2
Weight,kg
Explosion-proof three-phase asynchronous Electric Motors with a short-circuited rotor of type5560 are intended for an Electric Motor gear of stationary machines and gears (pumps, fans, etc.)in the shafts dangerous under the contents of firedamp (methane) and finely pulverized coal, and also inexplosive productions of internal and external installations used in oil refining, gas, chemical and otherindustries.
Electric Motors 5560 have the following versions on explosion safety: 4 and 1ExdIIBT4 inaccordance with GOST 12.2.020 (home market), ExdI and 1ExdIIBT4 in accordance withGOST R 51330.0 (export to Russia and the CIS countries), ExdI and 1ExdIIBT4 in accordance withGOST 12.2.020 (export to other countries).
Electric Motors are produced according to specifications ofTechnical Conditions 31.1-05758925-004-2003.
Aspect of a climatic modification and a category of arranging of the Electric Motors produced forhome market and export deliveries to the countries with a temperate climate - 2,5, for export deliveriesto the countries with a damp and dry tropical climate - 2,5 in accordance with GOST 15150.
Nominal operating mode of Electric Motors - S1 is in accordance with GOST 183 and GOST 28173.Electric Motors are oriented for operation from a circuit of three-phase alternate current by voltage
6000V and frequency 50Hz, and according to the customer's request on 10kW with power lowering onone grade and frequency 50Hz.
Operation of Electric Motors from frequency shifters is according to the additional agreement.Protection index of Electric Motors from external effects - IP54 is in accordance with GOST 17494,
protection index of the external fan from air input - IP20 is in accordance with GOST 17494.Electric Motors have class insulation of thermal resistance F with use on a class of thermal resistance B
in accordance with GOST 8865.Constructive version of Electric Motors on a mounting mode - IM1001 is in accordance
with GOST 2479.The terminal box of Electric Motors has to be fixed from the right side if to take a detached view from
the appearing end of the shaft. According to the customer's request Electric Motors can be produced withthe terminal box located at the left.
Cooling method of Electric Motors - IC0151 is in accordance with GOST 20459.The weight of Electric Motors and specifications for a nominal operating mode are given in Table 6.1.The overall, mounting and connection dimensions of Electric Motors are given on Figure 6 and in
Table 6.2.
Table 6.1. - Specifications of Electric Motors 5560
5560S-25560M-25560LA-25560LB-25560S-45560M-45560LA-45560LB-45560S-65560M-65560LA-65560LB-65560S-85560M-85560LA-85560LB-8
50063080010005006308001000400500630800315400500630
300030003000300015001500150015001000100010001000750750750750
0,50,60,60,730,680,660,60,60,80,81,01,00,80,80,80,8
94,895,195,595,994,595,195,696
94,895,295,395,594,795,095,295,5
0,90,90,90,920,910,920,920,920,830,840,840,90,780,780,790,85
2,72,72,82,83,03,13,43,02,22,22,22,22,22,22,22,2
1,0 6,0 12,7 33001,0 6,0 16,0 35001,1 7,0 21,0 47001,1 7,0 25,3 56401,5 7,1 28,0 35601,8 7,7 35,0 41802,22,2
8,77,5
45,053,0
51505750
1,1 5,5 32,0 34001,1 5,5 46,0 38001,11,6
5,56,0
59,073,0
45005430
1,0 5,5 38,0 34001,0 5,5 54,5 38001,01,5
5,56,0
69,886,6
45005430
Electric Motors ВАО5П560
Explosion-proof three-phase asynchronous Electric Motors with a short-circuited rotor of type ВАО5П560 are intended for an Electric Motor gear of stationary machines and gears (pumps, fans, etc.) in the shafts dangerous under the contents of firedamp (methane) and finely pulverized coal, and also in explosive productions of internal and external installations used in oil refining, gas, chemical and other industries.
Electric Motors ВАО5П560 have the following versions on explosion safety: РВ4В and 1ExdIIBT4 in accordance with GOST 12.2.020 (home market), РВExdI and 1ExdIIBT4 in accor-dance with GOST R 51330.0 (export to Russia and the CIS countries), ExdI and 1ExdIIBT4 in accordance with GOST 12.2.020 (export to other countries).
Electric Motors are produced according to specifications of Technical Conditions ТУ У 31.1-05758925-004-2003.
Aspect of a climatic modification and a category of arranging of the Electric Motors produced for home market and export deliveries to the countries with a temperate climate - У2,5, for export deliveries to the countries with a damp and dry tropical climate - Т2,5 in accordance with GOST 15150.
Nominal operating mode of Electric Motors - S1 is in accordance with GOST 183 and GOST 28173.
Electric Motors are oriented for operation from a circuit of three-phase alternate current by voltage 6000V and frequency 50Hz, and according to the customer’s request on 10kW with power lowering on one grade and frequency 50Hz.
Operation of Electric Motors from frequency shifters is according to the additional agreement.
Protection index of Electric Motors from external effects - IP54 is in accordance with GOST 17494, protection index of the external fan from air input - IP20 is in accordance with GOST 17494.
Electric Motors have class insulation of thermal resistance F with use on a class of thermal resistance B in accordance with GOST 8865.
Constructive version of Electric Motors on a mounting mode - IM1001 is in accordance with GOST 2479.
The terminal box of Electric Motors has to be fixed from the right side if to take a detached view from the appearing end of the shaft. According to the customer’s request Electric Motors can be produced with the terminal box located at the left.
Cooling method of Electric Motors - IC0151 is in accordance with GOST 20459. The weight of Electric Motors and specifications for a nominal operating mode are given in
Table 6.1. The overall, mounting and connection dimensions of Electric Motors are given on Figure 6
and in Table 6.2.
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
23
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
ВАО5П560
l10l1 l31l30
4 port d10
Figure 6. Overall, mounting and connection dimensions of Electric Motors5560
b10
b11
h 31
b31b32
hh 1
0
h 1
b1
h 5
d1
Table 6.2. - Overall, mounting and connection dimensions of Electric Motors5560
Electric motorType h l1 b10 l10 l31 d10 l30 h10 b11 b32 b31 h31 d1 b1 h1 h5
5560S-2
560
1000
630
450
42
1705
38
1120
540
840 1076 90 25 14 955560M-2 710 18355560LA-2 800 20555560LB-2 900 22155560S-4
950
630
355
1685
1070 800 1090 110 32 18 117
5560M-4 710 18155560LA-45560LB-4
800900
20352195
5560S-6 630 16855560M-6 710 18155560LA-65560LB-6
800900
20352195
5560S-85560M-85560LA-85560LB-8
630710800900
1685181520352195
210
24
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
ВАО5
П630
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
Electric Motors ВАО5П630
Explosion-proof three-phase asynchronous Electric Motors with a short-circuited rotor of type ВАО5П630 are intended for an Electric Motor gear of stationary machines and gears (pumps, fans, etc.) in the shafts dangerous under the contents of firedamp (methane) and finely pulverized coal, and also in explosive productions of internal and external installations used in oil refining, gas, chemical and other industries.
Electric Motors ВАО5П630 have the following versions on explosion safety: PB4B and 1ExdIIBT4 in accordance with GOST 12.2.020 (home market), PBExdI and 1ExdIIBT4 in accor-dance with GOST R 51330.0 (export to Russia and the CIS countries), ExdI and 1ExdIIBT4 in accordance with GOST 12.2.020 (export to other countries).
Electric Motors are produced according to speciications of Technical Conditions ТУ У 31.1-05758925-004-2003.
Aspect of a climatic modification and a category of arranging of the Electric Motors produced for home market and export deliveries to the countries with a temperate climate - У2,5, for export deliveries to the countries with a damp and dry tropical climate - Т2,5 in accordance with GOST 15150.
Nominal operating mode of Electric Motors - S1 is in accordance with GOST 183 and GOST 28173.
Electric Motors ВАО5П630 are oriented for operation from a circuit of three-phase alternate current by voltage 6000V and frequency 50Hz.
Operation of Electric Motors from frequency shifters is according to the additional agreement.
Protection index of Electric Motors from external effects - IP54 is in accordance with GOST 17494, protection index of the external fan from air input - IP20 is in accordance with GOST 17494.
Electric Motors ВАО5П630 have class insulation of thermal resistance F with use on a class of thermal resistance B in accordance with GOST 8865.
Constructive version of Electric Motors ВАО5П630 on a mounting mode - IM1001 is in accordance with GOST 2479.
Electric Motors ВАО5П630 have the left sense of rotation. According to the customer’s request Electric Motors can be produced with the right sense of rotation.
The terminal box of Electric Motors has to be fixed from the right side if to take a detached view from the appearing end of the shaft. According to the customer’s request Electric Motors can be produced with the terminal box located at the left.
Cooling method of Electric Motors - IC0151 is in accordance with GOST 20459. The weight of Electric Motors and specifications for a nominal operating mode are given in
Table 7.1. The overall, mounting and connection dimensions of Electric Motors are given on Figures 7.
and in Table 7.2.
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
25
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
ВАО5П630
l10l1 l31l30
4 port d10b10
b11
h 31
b31b32
h
h 10
h 5
d1
b1
h 1
b1h 1
Figure 7. Overall, mounting and connection dimensions of Electric Motors5630
Electric MotorType h b10l1 l10 l31 d10 l30 h10 b11 b32 b31 h31 d1 b1 h1 h5
630 1250 375 42 30 1440 7655630S-45630M-45630L-4
1080 1395206022502440
140 36 20 156100011201250
250
5630L-45630M-45630S-4
200016001250
0,6715000,6715000,671500
96,495,795,3
0,910,910,91
2,32,72,5
1,11,31,1
5,8 105 87606,6 87 75105,8 71 6500
Electric MotorType
NominalWattage,
kW
SynchronousVelocity,r/min
Slidingmotion,
%
At nominal load
Output-Input
Ratio,%
cos,..
max
Mnom,
o.e.
start
Mnom,
o.e.
IstartInom
,
..
InertiaMoment,kg m2
Weight,kg
Table 7.1. - Specifications of Electric Motors 5630
Table 7.2. - Overall, mounting and connection dimensions of Electric Motors5630
26
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
ВРК2
80
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
Electric Motors ВРК280
Explosion-proof three-phase asynchronous Electric Motors with slip rings of type BPK280 are intended for an Electric Motor gear of stationary machines and gears in the shafts dangerous under the contents of firedamp (methane) and finely pulverized coal.
Electric Motors BPK280 have version on explosion safety РВ3ВИа on GOST12.2.020 (home market), РВЕхdI in accordance with GOST R 51330.0 (export to Russia and the CIS countries) and ExdI on GOST12.2.020 (export to other countries).
Electric Motors are produced according to specifications of Technical Conditions ТУ У 31.1-05758925-007:2006.
Aspect of a climatic modification and a category of arranging of the Electric Motors pro-duced for home market and export deliveries to the countries with a temperate climate - У2,5, for export deliveries to the countries with a damp and dry tropical climate - Т2,5 in accordance with GOST 15150.
Operating modes of Electric Motors BPK280 - S1 and S8 are in accordance with GOST 183 and GOST 28173.
Parameters of mode S8: number of rotation velocities - 2 (n1=n nom, n 2=0,2n nom), braking type - electric, number of cycles at an hour - 40, cyclic duration factor - 40%, inertia factor 1,2.
Electric Motors are produced on rated voltage 380, 400, 415, 440, 500, 660V at a current fre-quency 50Hz and 380, 440, 660V at a current frequency 60Hz. In case customer’s requirements are absent Electric Motors are produced on rated voltage 380/660V.
Protection index of Electric Motors from external effects - IP54 is in accordance with GOST 17494, protection index of the fan from air input - IP20 is in accordance with GOST 17494.
Class of thermal resistance of stator winding insulation - F, armature coils - H are in accor-dance with GOST 8865.
Version on a mounting mode - IM1001 is in accordance with GOST 2479. Electric Motors have two terminal boxes - one for stator and one for rotor. The sharp turn of
terminal boxes on an edge divisible by 90° is acceptable. Cooling method of Electric Motors - ICA0141 is in accordance with GOST 20459. The weight of Electric Motors and specifications for a nominal operating mode are given in
Table 8.1. The overall, mounting and connection dimensions of Electric Motors are given on Figure 8
and in Table 8.2.
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
27
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
ВРК280
Electric MotorType
d10d1 l1 l10 l30 l31 b10b1 b31 b32 h h31h10h5h1
280 S8280 S6
280 M6,82480 170 368
358
4191450 357 45722 590 350 280 86023+2-2,68514
Table 8.2. - Overall, mounting and connection dimensions of Electric Motors280
Electric MotorType
NominalWattage,kW
SynchronousVelocity,r/min
Slidingmotion,%
At nominal loadOutput-InputRatio,%
cos
max
Mnom
Slip-ringvoltage, V
Rotorcurrent,
InertiaMoment,kg m2
Weight,kg
280S6 55 1000 2,0 91,8 0,82 3,5191173 4,46 1120
280M6 75 1000 2,0 92,3 0,84 3,2222201 4,84 1160
280S8 45 750 3,3 90,5 0,82 4,59 1090
280M8 55 3,3 91,0 0,82 2,4160207 5,10 1150750
2,4136200
Table 8.1. - Specifications of Electric Motors 280
l10l31
l30
l1
b32 b31
h 31
h
b10
h 10
4 port d10
Figure 8. Overall, mounting and connection dimensions of Electric Motors280
h 1
b1
h 5
d1
28
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
ВАОК
-315
, 355
, 450
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
Electric Motors ВАОК 315, ВАОК 355, ВАОК 450
Explosion-proof three-phase asynchronous Electric Motors with slip rings of type BAOK 315, BAOK 355, BAOK 450 are intended for an Electric Motor gear of stationary machines and gears in the shafts dangerous under the contents of firedamp (methane) and finely pulverized coal, and also in explosive location zones and external installations.
Electric Motors BAOK 315, BAOK 355, BAOK 450 have version on explosion safety РВ3ВИа and 1ЕхdIIАТ4 in accordance with GOST 12.2.020 (home market), РВЕхdI and 1ЕхdIIАТ4 in accordance with GOST R 51330.0 (export to Russia and the CIS countries), ExdI and lExdIIАT4 in accordance with GOST 12.2.020 (export to other countries).
Electric Motors are produced according to specifications of Technical Conditions ТУ У 31.1-05758925-007:2006.
Aspect of a climatic modification and a category of arranging of the Electric Motors produced for home market and export deliveries to the countries with a temperate climate - У2,5, for export deliveries to the countries with a damp and dry tropical climate - Т2,5 on GOST15150.
Operating modes of Electric Motors - S1 and S8 are in accordance with GOST 183 and GOST 28173. In mode S8 of Electric Motors the operation with rotation velocity n1=n nom and n2=0,1n nom is supposed.
Electric Motors are produced on rated voltage 380, 400, 415, 440, 500, 660V at a current frequency 50Hz and 380, 440, 660V at a current frequency 60Hz. In case customer’s require-ments are absent Electric Motors with power to 200 kW are inclusively produced on rated voltage 380/660V, Electric Motors with power over 200 kW are produced on rated voltage 660V.
Protection index of Electric Motors from external effects - IP54 is in accordance with GOST 17494, protection index of the external fan from air input - IP20 is in accordance with GOST 17494.
Class of thermal resistance of stator winding insulation - F, armature coils - H are in accor-dance with GOST 8865.
Version on a mounting mode - IM1001 is in accordance with GOST 2479. Electric Motors have two terminal boxes - one for stator and one for rotor. The sharp turn of
terminal boxes on an edge, divisible by 90° is acceptable. Cooling method of Electric Motors - ICA 0151 is in accordance with GOST 20459. The weight of Electric Motors and specifications for a nominal operating mode at frequency
50Hz are given in Table 9.1. The overall, mounting and connection dimensions of Electric Motors are given on Figure 9
and in Table 9.2.
Explosion-proof three-phase asynchronous Electric Motors with slip rings of type BAOK 315,BAOK 355, BAOK 450 are intended for an Electric Motor gear of stationary machines and gears inthe shafts dangerous under the contents of firedamp (methane) and finely pulverized coal, and alsoin explosive location zones and external installations.
Electric Motors BAOK 315, BAOK 355, BAOK 450 have version on explosion safety 3 and1dII4 in accordance with GOST 12.2.020 (home market), dI and 1dII4 in accordancewith GOST R 51330.0 (export to Russia and the CIS countries), ExdI and lExdIIT4 in accordancewith GOST 12.2.020 (export to other countries).
Electric Motors are produced according to specificationsof Technical Conditions 31.1-05758925-007:2006.
Aspect of a climatic modification and a category of arranging of the Electric Motors produced for homemarket and export deliveries to the countries with a temperate climate - 2,5, for export deliveries tothe countries with a damp and dry tropical climate - 2,5 on GOST15150.
Operating modes of Electric Motors - S1 and S8 are in accordance with GOST 183 and GOST 28173.In mode S8 of Electric Motors the operation with rotation velocity n1=n nom and n2=0,1n nom is supposed.
Electric Motors are produced on rated voltage 380, 400, 415, 440, 500, 660V at a current frequency 50Hzand 380, 440, 660V at a current frequency 60Hz. In case customer's requirements are absent Electric Motorswith power to 200 kW are inclusively produced on rated voltage 380/660V, Electric Motors with power over200 kW are produced on rated voltage 660V.
Protection index of Electric Motors from external effects - IP54 is in accordance with GOST 17494,protection index of the external fan from air input - IP20 is in accordance with GOST 17494.
Class of thermal resistance of stator winding insulation - F, armature coils - H are in accordancewith GOST 8865.
Version on a mounting mode - IM1001 is in accordance with GOST 2479.Electric Motors have two terminal boxes - one for stator and one for rotor. The sharp turn of terminal
boxes on an edge, divisible by 90° is acceptable.Cooling method of Electric Motors - ICA 0151 is in accordance with GOST 20459.The weight of Electric Motors and specifications for a nominal operating mode at frequency 50Hz are
given in Table 9.1.The overall, mounting and connection dimensions of Electric Motors are given on Figure 9 and
in Table 9.2.
Electric Motors 315, 355, 450
Electric MotorType
NominalWattage,
kW
SynchronousVelocity,
r/minSlidingmotion,
%
At nominal loadOutput-Input
Ratio,%cos
max
Mnom
Slip-ringvoltage, V
Rotorcurrent,
InertiaMoment,kg m2
Weight,kg
315S(A)-6 90 1000 2,2 91,4 0,83 2,6240260 4,08 1210 315S()-6 110 1000 2,2 92,0 0,85 2,8250290 4,08 1300 315M-6 132 1000 2,2 92,5 0,86 5,10 1440 315S-8 315M-8 355S-6 355M-6 355L-6 355S()-8 355S(B)-8 355M-8 355L-8 450S-6 450M-6 450S-8 450M-8
7590160200250110132160200250315200250
2,72,71,81,81,52,02,02,02,01,51,51,51,5
90,291,093,093,394,591,592,092,593,994,394,793,393,7
0,800,800,860,860,900,820,840,840,860,880,880,830,83
2,21902702,32352602,83153302,62,85
375460
350322
2,32353152,32503402,32,8
300400
335297
2,54703152,56003152,34202902,3525290
4,595,618,1511,2113,258,1510,1912,4916,0618,3522,9421,9227,52
1310148018001980225017201780198022502340262023402620
75075010001000100075075075075010001000750750
3,0300290
Table 9.1. - Specifications of Electric Motors 315, 355, 450
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
29
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
ВАОК-315, 355, 450
Electric MotorTypes
b10b1 b31 b32 d1 d10 h1h h5 h10 h31 l31l30l10l1
315S()-6 315S-8 315M-6 315M-8 355S-6 355S()-8 355S(B)-8 355M-6 355M-8 355L-6 355L-8 450S-6 450S-8 450M-6 450M-8
315S(A)-6
22
387
430
350 80508 570
25
28
610
750
605
710
28 315 14 85 21+2-3 890 170
406 1545256
90
100
28
35
355
450
14
16
95
106
23+2-3
25+2-3
970
1105
170
210
457
560
630
710
1620
1630
1700
1800
1825
1905
294
330
Table 9.2. - Overall, mounting and connection dimensions of Electric Motors 315, 355, 450
l30
l10l39l1
h
b10
h 31
b31
h 10
b32
Figure 9. Overall, mounting and connection dimensions of Electric Motors 315, 355, 450
4 port d10
h 1 b1
h 5
d1
30
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
ЭДК,
ЭДКО
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
Explosion-proof three-phase asynchronous Electric Motors with a short-circuited rotor of types , are intended for an Electric Motor gear of clearing and tunneling combines in the shafts dangerousunder the contents of firedamp (methane) and finely pulverized coal.
Electric Motors , have the following versions on explosion safety: 3 in accordancewith GOST 12.2.020 (home market), PBExdI in accordance with GOST R 51330.0 (export to Russia andthe CIScountries) and ExdI in accordance with GOST 12.2.020 (export to other countries).
Electric Motors are produced according to specifications ofTechnical Conditions 31.1-05758925-009:2006.
Aspect of a climatic modification and a category of arranging of the Electric Motors produced for homemarket and export deliveries to the countries with a temperate climate - 5, for export deliveries tothe countries with a damp and dry tropical climate - 5 in accordance with GOST 15150.
Electric Motors 4-40, 4-75, 44-110 and 44-110-2 are oriented for operationin mode S4 in accordance with GOST 183 and GOST 28173 at cyclic duration factor of 60% and30 switchings on at an hour, andalso in mode S2 on GOST183 and GOST 28173 at duration of the period of a constant rated loadof 60 minutes.
Electric Motor 44-120, 44-120-2 is oriented for operation in mode S4 in accordancewith GOST 183 and GOST 28173 at cyclic duration factor of 60% and 30 switchings on at an hour.
Electric Motors are oriented for operation from a circuit of three-phase alternate current. ElectricMotors 4-40 and 44-110-2 are calculated on supply voltages 660 and 500V by frequency 50and 60Hz. Electric Motor 4-75 is oriented for supply voltage 380/660V by frequency 50Hz.The Electric Motor 44-110 is calculated on supply voltage 660V by frequency 50 and 60Hz,and also 500Vby frequency 50Hz. The Electric Motor 44-120, 44-120-2 is orientedfor supply voltage 660 and 1140V by frequency 50Hz.
Protection index of Electric Motors from external effects - IP54 is in accordance with GOST 17494.Fan-cooled Electric Motors 4O4-110, 4O4-110-2 and 4O4-120, 4O4-120-2 havea protection index of the fan from an input of air IP20 which is in accordance with GOST17494.
Electric Motors have class insulation of thermal resistance H in accordance with GOST 8865.Cooling method of Electric Motors 4-40 and 4-75 - IC01 is in accordance with GOST 20459,
Electric Motors 4O4-110,4O4-110-2 and 4O4-120, 4O4-120-2 - IC0141is in accordance with GOST20459.
The weight of Electric Motors and specifications for a nominal operating mode at frequency 50Hzand voltage 660V are given in Table 10.
The overall, mounting and connection dimensions of Electric Motors are given on Figures 10.1 - 10.3.
Electric Motors ,
Table 10. - Specifications of Electric Motors and
Electric MotorType
Operationmode
SynchronousVelocity,
r/min
NominalWattage,
kWSlidingmotion,
%
At nominal loadOutput-Input
Ratio,%cos
m ax
Mnom
start
Mnom
Istart
Inom
InertiaMoment,kg m2
Weight,kg
4-40S4 1500S2 1500
4090
1,404,00
91,991,1
0,760,89
5,42,4
4,52,0
11,25,8
0,59 670
4-75S4 1500S2 1500
75120
1,903,33
92,690,4
0,870,87
2,91,8
2,91,8
0,98 1100
44-12044-120-2(welded shell)
S4
S4
1500
1500
44-110-2S4 1500S2 1500
S2 1500
44-110S4 1500
120
120
110150
132
110
2,50
2,50
2,302,40
2,80
1,80
92,7
92,7
92,592,3
92,0
92,8
0,85
0,85
0,850,86
0,86
0,84
2,9
2,9
2,32,4
1,9
3,3
8,7
8,7
5,55,9
4,6
7,9
1,06
1,06
1,00
1,00
1273
1273
1250
1250
3,8
3,8
2,12,7
1,7
3,7
6,54,0
Electric Motors ЭДК, ЭДКО
Explosion-proof three-phase asynchronous Electric Motors with a short-circuited rotor of types ЭДК, ЭДКО are intended for an Electric Motor gear of clearing and tunneling combines in the shafts dangerous under the contents of firedamp (methane) and finely pulverized coal.
Electric Motors ЭДК, ЭДКО have the following versions on explosion safety: РВ3ВИа in accordance with GOST 12.2.020 (home market), PBExdI in accordance with GOST R 51330.0 (export to Russia and the CIS countries) and ExdI in accordance with GOST 12.2.020 (export to other countries).
Electric Motors are produced according to specifications of Technical Conditions ТУ У 31.1-05758925-009:2006.
Aspect of a climatic modification and a category of arranging of the Electric Motors pro-duced for home market and export deliveries to the countries with a temperate climate - У5, for export deliveries to the countries with a damp and dry tropical climate - Т5 in accordance with GOST 15150.
Electric Motors ЭДК4-40, ЭДК4-75, 4ЭДКО4-110 and 4ЭДКО4-110-2 are oriented for opera-tion in mode S4 in accordance with GOST 183 and GOST 28173 at cyclic duration factor of 60% and 30 switchings on at an hour, and also in mode S2 on GOST183 and GOST 28173 at duration of the period of a constant rated load of 60 minutes.
Electric Motor 4ЭДКО4-120, 4ЭДКО4-120-2 is oriented for operation in mode S4 in accor-dance with GOST 183 and GOST 28173 at cyclic duration factor of 60% and 30 switchings on at an hour.
Electric Motors are oriented for operation from a circuit of three-phase alternate current. Electric Motors ЭДК4-40 and 4ЭДКО4-110-2 are calculated on supply voltages 660 and 500V by frequency 50 and 60Hz. Electric Motor ЭДК4-75 is oriented for supply voltage 380/660V by frequency 50Hz. The Electric Motor 4ЭДКО4-110 is calculated on supply voltage 660V by frequency 50 and 60Hz, and also 500V by frequency 50Hz. The Electric Motor 4ЭДКО4-120, 4ЭДКО4-120-2 is oriented for supply voltage 660 and 1140V by frequency 50Hz.
Protection index of Electric Motors from external effects - IP54 is in accordance with GOST 17494. Fan-cooled Electric Motors 4ЭДКO4-110, 4ЭДКO4-110-2 and 4ЭДКO4-120, 4ЭДКO4-120-2 have a protection index of the fan from an input of air IP20 which is in accor-dance with GOST17494.
Electric Motors have class insulation of thermal resistance H in accordance with GOST 8865. Cooling method of Electric Motors ЭДК4-40 and ЭДК4-75 - IC01 is in accordance with GOST
20459, Electric Motors 4ЭДКO4-110,4ЭДКO4-110-2 and 4ЭДКO4-120, 4ЭДКO4-120-2 - IC0141 is in accordance with GOST20459.
The weight of Electric Motors and specifications for a nominal operating mode at frequency 50Hz and voltage 660V are given in Table 10.
The overall, mounting and connection dimensions of Electric Motors are given on Figures 10.1 - 10.3.
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
31
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
ЭДК, ЭДКО
110
290
330
290
105
260
30
26
110
58
87
Zone"Explosion" 60
1000
85
27 10,567
0
720
11
30
283
400
16 port 33 375
145 145
335
335
110400 79
1165
70
27
375
720
290
48
120
Zone "Explosion"
340
400
340
365
8 port 33 M24-7H
48
40
35960
70
234
505
340
340
200
16 port 30
Figure 10.3. Overall, mounting and connection dimensions of Electric Motors44-110, 44-110-2, 44-120, 44-120-2
Figure 10.2. Overall, mounting and connection dimensions ofElectric Motors 4-75
Figure 10.1. Overall, mounting and connection dimensions ofElectric Motors 4-40
32
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
ЭКВ,
ЭДКВ
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
Electric Motors ЭКВ, ЭДКВ
Electric Motors for shearers’ gear systems
Explosion-proof three-phase asynchronous Electric Motors with a short-circuited rotor of type ЭКВ3-55, 2ЭКВ3,5-90, 2ЭКВ3,5-100, ЭКВ3,5-180, ЭКВ4-140, ЭКВ4-150, ЭКВ4-185, ЭКВ5-200-2, ЭКВ5-250B, ЭКВ6-355 are intended for an Electric Motor gear of shearers in the shafts dangerous under the contents of firedamp (methane) and finely pulverized coal.
Electric Motors ЭКВ3-55, 2ЭКВ3,5-90, 2ЭКВ3,5-100, ЭКВ3,5-180, ЭКВ4-140, ЭКВ4-185, ЭКВ5-200-2, have the following versions on explosion safety: РВ3ВИа (for the Electric Motor 1ЭКВ3,5-200 - РВ1ВИа) in accordance with GOST12.2.020 (home market), РВЕхdI in accor-dance with GOST R 51330.0 (export to Russia and the CIS countries) and ExdI in accordance with GOST 12.2.020 (export to other countries). Electric Motors ЭКВ4-150, ЭКВ5-250В, ЭКВ6-355 have versions on explosion safety РВ3ВИа in accordance with GOST 12.2.020 (home market) and РВExdI in accordance with GOST R 51330.0 (export to Russia and the CIS countries).
Electric Motors ЭКВ3-55, 2ЭКВ3,5-90, 2ЭКВ3,5-100, ЭКВ3,5-180, ЭКВ4-140, ЭКВ4-185, ЭКВ5-200-2, ЭДКВ4-220 are produced according to specifications of Technical Conditions ТУ У 31.1-05758925-006:2006, Electric Motors ЭКВ4-150, ЭКВ5-250В, ЭКВ6-355 are produced according to specifications of Technical Conditions ТУ У 31.1-00217159-061-2005.
Aspect of a climatic modification and an arranging category 2ЭКВ3,5-90, 2ЭКВ3,5-100, ЭКВ3,5-180, ЭКВ4-140, ЭКВ4-185, ЭКВ5-200-2, ЭДКВ4-220, produced for home market and export deliveries to the countries with a temperate climate - У5, for export deliveries to the coun-tries with a damp and dry tropical climate - Т5 is in accordance with GOST 15150. An aspect of a climatic modification and a category of arranging of Electric Motors ЭКВ4-150, ЭКВ5-250В, ЭКВ6-355 - У5 is in accordance with GOST 15150.
Electric Motors ЭКВ3-55, ЭКВ4-140, ЭКВ4-150, ЭКВ5-250В, ЭКВ6-355 are oriented for operation in modes S1 and S4 in accordance with GOST 183 and GOST 28173. Electric Motors 2ЭКВ3,5-90, 2ЭКВ3,5-100, ЭКВ3,5-180, ЭКВ4-185, ЭКВ5-200-2 are oriented for operation in mode S4 in accordance with GOST 183 and GOST 28173. Parameters of mode S4 are given in Table 9.
Electric Motors are oriented for operation from a circuit of three-phase alternate current by frequency 50Hz. Electric Motors ЭКВ3-55 are oriented for supply voltages 500 and 660V; the Electric Motor 2ЭКВ3,5-90 is oriented for supply voltages 500, 660, 1000 and 1140V; the Electric Motor 2ЭКВ3,5-100 is oriented for supply voltage 660V; Electric Motors ЭКВ3,5-180, ЭКВ5-200-2, ЭДКВ4-220 are oriented for supply voltages 660, 1000 and 1140V; Electric Motor ЭКВ4-140 is oriented for supply voltages 500, 660 and 1140V; Electric Motor ЭКВ4-185 is oriented for supply voltages 1000 and 1140V; Electric Motor ЭКВ4-150 is oriented for supply voltages 660 and 1140V; Electric Motors ЭКВ5-250В and ЭКВ6-355 are calculated on supply voltage 1140V.
Protection index of Electric Motors from external effects - IP54 is in accordance with GOST 17494. Electric Motors 2ЭКВ3,5-90, 2ЭКВ3,5-100, ЭКВ3,5-180, ЭКВ4-150, ЭКВ5-250B, ЭКВ6-355,
ЭДКВ4-220 have class insulation of thermal resistance H, and Electric Motors ЭКВ3-55, ЭКВ4-140, ЭКВ4-185, ЭКВ5-200-2 have class insulation of thermal resistance F in accordance with GOST 8865.
Cooling method of Electric Motors - ICW37 is in accordance with GOST 20459. The weight of Electric Motors and specifications for a nominal operating mode at voltage
660V (for Electric Motors ЭКВ4-185, ЭКВ4-150, ЭКВ5-250B, ЭКВ6-355 at voltage 1140V) and frequency 50Hz are given in Table 11.
The overall, mounting and connection dimensions of Electric Motors ЭКВ are given on Figures 11.1-11.5; Figures 11.8-11.10; Figure 11.15.
Electric Motors for axis gear system of shearers
Explosion-proof three-phase asynchronous Electric Motors with a short-circuited rotor of type ЭКВ4-30-6, ЭКВ4-45-6, ЭКВ4-60-6 are intended for axis gear system of shearers working in underground developments of collieries, firedamp (methane) dangerous under the contents and finely pulverized coal. Electric Motor ЭКВ4-30-6 can be used also for gear system of combine’s hydroelectric installation КДК700 with supply voltage 1140V and current frequency 50Hz.
Electric Motors have the following versions on explosion safety: РВ3ВИа in accordance with GOST 12.2.020 (home market) and РВExdI in accordance with GOST R 51330.0 (export to Russia and the CIS countries).
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
33
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
ЭКВ, ЭДКВ Electric Motors are produced according to specifications of Technical Conditions
ТУ У 31.1-00217159-066:2005. Aspect of a climatic modification and a category of arranging of Electric Motors - У5 is in
accordance with GOST 15150. Nominal operating mode of Electric Motors - S1 is in accordance with GOST 183 and
GOST 28173. Electric Motors are oriented for operation, both from a circuit of three-phase alternate current
and from a frequency shifter. Electric Motors are produced on rated voltage 1140 and 950V at a nominal current frequency 50Hz. The regulation band of supply voltage makes from 0 to 1140V. The regulation band of current frequency makes 2,1-150Hz for Electric Motors ЭКВ4-30-6; 2,5-150Hz for Electric Motors ЭКВ4-45-6, ЭКВ4-60-6. The regulation band of rotation speed makes 50-3000 rev/min.
Long operation of Electric Motors with the driving torque close to the nominal is acceptable at a current frequency to 80Hz. At a current frequency more than 80Hz the long operation of Electric Motors is acceptable only in a shunting mode with the lowered loading torque on the axis.
Protection index of Electric Motors from external effects - IР54 is in accordance with GOST 17494. Electric Motors have class insulation of thermal resistance F in accordance with GOST 8865. Versions on a mounting mode - IM4201 is in accordance with GOST 2479. Cooling method of Electric Motors - ICW37 is in accordance with GOST 20459. The weight of Electric Motors and specifications for voltage 1140V and frequencies 50Hz are
given in Table 11. The overall, mounting and connection dimensions of Electric Motors ЭКВ are given on Figures
11.11 - 11.13.
Electric Motors for gear hydraulics systems of shearers
Explosion-proof three-phase asynchronous Electric Motors with a short-circuited rotor of type ЭКВ2,5-7,5 is intended for an electric motor gear of a hydraulic-circuit system of the shearer КДК500 working in underground developments of collieries, firedamp (methane) dangerous under the contents and finely pulverized coal.
The Electric Motor has following versions on explosion safety: РВ3ВИа in accordance with GOST 12.2.020 (home market) and РВExdI in accordance with GOST R 51330.0 (export to Russia and the CIS countries).
The motor is issued according to specifications of Technical Conditions У 31.1-00217159-067:2005. Aspect of a climatic modification and a category of arranging of the Electric motor - У5 is in
accordance with GOST 15150. Nominal operating mode of Electric Motor - S1 is in accordance with GOST 183 and
GOST 28173.The Electric Motor is oriented for operation from a circuit of three-phase alternate current by
voltage 1140V and frequency 50Hz. Protection index of the Electric Motor from external effects - IР54 is in accordance with
GOST 17494. The Electric Motor has class insulation of thermal resistance Н in accordance with GOST 8865.
Versions on a mounting mode - IM4201 is in accordance with GOST 2479. Electric Motor cooling method - ICW37 is in accordance with GOST 20459. The weight of the Electric motor and specifications for voltage 1140V and frequencies 50Hz
are given in Table 11. The overall, mounting and connection dimensions of Electric Motors ЭКВ are given on Figure
11.14.
34
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
ЭКВ,
ЭДКВ
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
Electric Motors for gear system of plow and scraper-plow installations
Explosion-proof three-phase asynchronous Electric Motors with a short-circuited rotor of type 3ЭКВ4УС2, ЭКВ4-140-3 are intended for gear system of plow and scraper-plow installations in the shafts dangerous under the contents of firedamp (methane) and finely pulverized coal.
Electric Motors have the following versions on explosion safety: РВ3ВИа in accordance with GOST 12.2.020 (home market), PBExdI in accordance with GOST R 51330.0 (export to Russia and the CIS countries) and ExdI in accordance with GOST 12.2.020 (export to other countries).
Electric Motors are produced according to specifications of Technical Conditions ТУ У 31.1-05758925-006:2006.
Aspect of a climatic modification and a category of arranging of the Electric Motors pro-duced for home market and export deliveries to the countries with a temperate climate - У5, for export deliveries to the countries with a damp and dry tropical climate - Т5 in accordance with GOST 15150.
Electric Motors ЭКВ4-140-3, 3ЭКВ4УС2 are oriented for operation in mode S4 in accordance with GOST 183 and GOST 28173. Parameters of mode S4 are given in Table 9.
Electric Motors are oriented for operation from a circuit of three-phase alternate current by frequency 50Hz. The Electric Motor 3ЭКВ4УС2 is oriented for supply voltages 660, 1000 and 1140V; Electric motor ЭКВ4-140-3 is oriented for supply voltages 500, 660 and 1140V.
Protection index of Electric Motors from external effects - IP54 is in accordance with GOST 17494.
The Electric Motor 3ЭКВ4УС2 have class insulation of thermal resistance Н, and Electric Motor ЭКВ4-140-3 has class insulation of thermal resistance F in accordance with GOST 8865.
Cooling method of Electric Motors - ICW37 is in accordance with GOST 20459. The weight of Electric Motors and specifications for a nominal operating mode at voltage 660V and frequency 50Hz are given in Table 11.
The overall, mounting and connection dimensions of Electric Motors ЭКВ are given on Figures 11.6 - 11.7.
Electric MotorType
Operationmode
Cyclicdurationfactor, %
Possiblenumber
of switchingson per 1 hour
Inertiaconstant
NominalWattage,
kWSlidingmotion,
%
At nominal load
Output-InputRatio,%
cos
max
Mnom
start
Mnom
Istart
Inom
InertiaMoment,kg m2
Weight,kg
SynchronousVelocity,r/min
3-55S4 60 30
1,2S1 - -
5538
5,003,50
87,087,6
0,7900,675
2,503,70
2,303,40
4,505,60
0,296 487
1500
4-140
4-140-34-185*
342
4-150*
5-250*
6-355*4-30-6*4-45-6*4-60-6*2,5-7,5*4-220* Electric Motors specifications are given for the Voltage of 1140 V.
S1, S4S4
6060
302,5
25S4 60 30 2,5S4S4
6060
1202,5
30S4S4
6060
302,5
25S1
S1
S1S1S1S1S1
S4,S1
-
-
-----
60
-
-
-----
30
-
-
------
3,5-180S4 60 30
1,2
S4 60 30 1,2
S4 40 30
23,5-10023,5-90 S4 60 30 1,2
140150185160200200225150
250
3553045607,5220
180100
200
90
3,203,404,002,504,501,651,801,90
1,70
1,303,804,003,805,301,5
5,904,50
6,40
2,70
92,091,791,291,489,594,094,092,5
93,0
94,587,088,087,580,094,5
89,087,6
88,0
87,5
0,8500,8550,8600,8400,8600,8600,8700,820
0,800
0,8900,8800,8800,8800,8000,82
0,8500,880
0,865
0,810
2,302,102,092,562,021,661,482,50
2,00
2,201,501,501,502,502,0
2,051,19
1,84
1,36
6,306,006,307,526,004,604,157,00
6,82
7,405,004,704,805,007,97
5,305,26
4,80
5,23
1,170
1,060
1,060
3,000
1,110
1,950
5,1300,3450,4730,6110,0321,41
0,691
0,3310,331
1138
1150
1200
1745
810
1080
1500290
10003253801001070
1500
1180
515515
2,702,502,713,322,622,272,022,82
2,77
2,502,001,802,002,202,5
2,382,24
2,13
2,48
5-200-2
1174
Table 11. - Specifications of Electric Motors
Electric Motors for gear system of plow and scraper-plow installations
Explosion-proof three-phase asynchronous Electric Motors with a short-circuited rotor of type342, 4-140-3 are intended for gear system of plow and scraper-plow installations in the shaftsdangerous under the contents of firedamp (methane) and finely pulverized coal.
Electric Motors have the following versions on explosion safety: 3 in accordance with GOST12.2.020 (home market), PBExdI in accordance with GOST R 51330.0 (export to Russia and the CIScountries) and ExdI in accordance with GOST 12.2.020 (export to other countries).
Electric Motors are produced according to specifications of Technical Conditions 31.1-05758925-006:2006.
Aspect of a climatic modification and a category of arranging of the Electric Motors produced for homemarket and export deliveries to the countries with a temperate climate - 5, for export deliveries to thecountries with a damp and dry tropical climate - 5 in accordance with GOST 15150.
Electric Motors 4-140-3, 342 are oriented for operation in mode S4 in accordance withGOST 183 and GOST 28173. Parameters of mode S4 are given in Table 9.
Electric Motors are oriented for operation from a circuit of three-phase alternate current by frequency50Hz. The Electric Motor 342 is oriented for supply voltages 660, 1000 and 1140V; Electricmotor 4-140-3 is oriented for supply voltages 500, 660 and 1140V.
Protection index of Electric Motors from external effects - IP54 is in accordance with GOST 17494.The Electric Motor 342 have class insulation of thermal resistance , and Electric Motor
4-140-3 has class insulation of thermal resistance F in accordance with GOST 8865.Cooling method of Electric Motors - ICW37 is in accordance with GOST 20459. The weight of
Electric Motors and specifications for a nominal operating mode at voltage 660V and frequency 50Hz aregiven in Table 11.
The overall, mounting and connection dimensions of Electric Motors are given on Figures 11.6 -11.7.
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
35
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
ЭКВ, ЭДКВ
Figure 11.1. Overall, mounting and connection dimensions of Electric Motors 3-55
2 8 0
440
480
1 0 5 1 3 5
2 5
6 2 1 8
2 9 5
7
7 5 0 5 5
3 8
1 0
6 1
25,
4
1 5 51 0 5
163
50
1 6 po rt M 2 0 -6 H
3 1 5
200
210
462
4 0 0
3 4 4
2 po rt 2 6
2 po rt M 2 4 -7 H
5 5
8 4 1 5 '
8 6
1 3 3
390
4 6 6 3
4 4 53 7 7 2 8
3 ,5
320
8 5 5 0 '
R 2 3 5
Figure 11.2. Overall, mounting and connection dimensions of Electric Motors23,5-90 and 23,5-100
R 2 2 5
2po
rtM
30-7
H
137
0,5
4 2 1 5 '
1 1 2 0
7 5
6 0 01 9 5 2 2 0
2 2 0 2 4 5
380
350
4545
135
1357 5
Figure 11.3. Overall, mounting and connection dimensions of Electric Motors 3,5-180
8 p o r t 3 0
8 p o r t 5 2
5 5
4 p o r t G 1 /2 - B
1 1 0
3 5 0
1 6 p o r t 3 8
4 8 0
720
d 1 0 x 7 2 h 8 x 8 2 d 1 1 x1 2 d 1 0
7 0 7 01 1 0 0
d 1 0 x7 2 h 8 x 8 2 d 1 1 x 1 2 d 1 0
7 0
303
4 8 0 780
5 0 5
5 1 0
2 5 5
Figure 11.4. Overall, mounting and connection dimensions of Electric Motors5-200-2
36
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
ЭКВ,
ЭДКВ
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
Figure 11.5. Overall, mounting and connection dimensions of Electric Motors4-140 and 4-185
2 7
7 2
2 7
7 2
1 0 9 0
3 2 0
500
157
2 0 7 ,54 0 7 ,5
4 1 5
2 po rt 5 5
W ate r in le t an d o u tle t
1 5 0
3 0 0
450
1 6 p o rt 3 3
3 8 0 3 8 0
601
Figure 11.6. Overall, mounting and connection dimensions of Electric Motors4-140-3. Other see Figure 9.5
Figure 11.7. Overall, mounting and connection dimensions of Electric Motors 342
3 8 0
C en te rin g
450
1 5 0
3 0 0 1 1 6 p o r t 3 3 7 2
2 7
7 2
2 7
1 0 9 0
601
2 0 7 ,5
4 0 7 ,5
4 1 5
3 8 0
C en te rin g
500
2 2 5
2 2 5
450
h9(-
0,15
5)
5 3 4 0 ,3 52 5 +0,52
440
f9(-0
,068
-0,2
23)
448
h12 (-
0,63
)
1 2 +0,43
7 8 6 -1,17
670
max
7 0
8 5 1 m ax
6 1 5 0 ,8 7
3 5 3 5
4 p o r t 2 6 ( +0,149+0,065 )W ate r in le t
D y= 1 6
O il
feed in g
5 2 8 -1,75
8 po rt 1 8 +0,43
In le t 4 -1 -6 3 -1 -3 1
B S 1 6 5 .1 8 9 .0 0 2 .0 -7 52 8 4 -0,5
250 -1
,342
0m
ax
2 5 5 -1,3
5 1 0 -1,75
O il
feed in g
4 7 3 0 '
6 0 1 0 '
4 7 3 0 '
6 0 1 0 '
R 2 4 5 0 ,3 5
5 5 3 ,5 1 1 H
G O S T 6 0 3 3 -8 0
Figure 11.8. Overall, mounting and connection dimensions of Electric Motors 4-150
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
37
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
ЭКВ, ЭДКВ
360
3 06 7 2
2 2
4 4 7
4 0
43
420
4 1 0
1 4 0
2 8 0
1 7 5
350
140
175
133
2 4
2 0 4 5
4 caps
15
35
~1 6 7
1 9 4
9 7 9 7 2 p o r t M 1 6 -7 H
fo r eye-bo lts
2 5 H 8
Cab
lein
let
8-1-
40-1
-3
5
BS
165.
189.
002.
0-75
2 6
1 5
Figure 11.11. Overall, mounting and connection dimensions of Electric Motors 4-30-6
R17
0
490
f9(-0
,078
-0,2
51)
498
h11 (-
0,44
)
2 5 +0,52 4 8 0 0 ,4 8
2 2 0
3 0 m in
9 3 0
1 27 7 3
500
h9(-
0,17
5)
498
-0,4
C ab le in le t
D y= 6 3
8 p o rt 2 2
540
5 4 0
442
max
712
W a te r in le t D = 1 6
7 5 3 ,5 1 1 G O S T 6 0 3 3 -8 02 7 0
3 5
5 5
125
1 4 5 2 1 5
2 3 5
305
3 2 5 R
270 6
06
Figure 11.9. Overall, mounting and connection dimensions of Electric Motors 5-250
W ater in le t
610
620
2 5
7 7 3
1 2
4 56 0 0
D = 6 3 m m
7 5 3 ,5 1 1
G O S T 6 0 3 3 -6 0
W ate r au tle t
530
86
0
2 0
1 6
W ate r in le t D y= 1 6
6 6 0
660
3 5
2 0
3 5
2 0
7 3 06 8 0 2 2
8 po rt
6 3 0
Figure 11.10. Overall, mounting and connection dimensions of Electric Motors 6-355
9 3 5
Wat
erin
let(
outle
t)
D1
62
port
4 po rt 5 2 (h = 2 7 )
4 p o r t 2 6
38
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
ЭКВ,
ЭДКВ
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
5 2 5
2 2 2 5
385
-1
360
3
3 0
6 8 1 208
398
2 p o rt D 1 6
W ate r in le t an d o u tle t
Cab
lein
let8
-1-4
0-1-
35
BS
16.5
.189
.002
.0-7
5
3 0 R
178
26
1 5
4 2 0
2 1 0
220
2 p o r t M 1 6
fo r eye -bo lts
2 po rt2 5
4 po rt 2 2
R 2 3 0
R 2 5 5
374 7
5 7
5 0
2 5
Oil
feed
ing
Oil
feed
ing
Figure 11.12. Overall, mounting and connection dimensions of Electric Motors 4-45-6
R 2 0 7
5 9 5
2 22 5
385
360
37 5 1
208
398
1,5
Cable inlet 8-1-40-1-35
BS 16.5.189.002.0-75
30 R17
8
26
1 5
4 2 0
220
R 2 3 0
R 2 5 5
354 5
55
R 2 0 7
Figure 11.13. Overall, mounting and connection dimensions of Electric Motors 4-60-6
3 0
W ate r in le t and o u tle t
2 p o r t D 1 6
2 1 0
440
5 0 2 p o rt M 1 6
fo r eye-b o lts
O il feed ing
2 5
2 p o r t 2 58 p o r t 2 2
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
39
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
ЭКВ, ЭДКВ
250
1 21 2 8 3 2
4 7 7
2 ...4
20
2 5 0
245
5 2 6
3 2 06 ...8 1 2 m in
100
100
1 0 0 1 0 0
120
1 2
260
2 6 0 7 0 m ax
4 po rt 1 8
R 1 6 0
C ab le in le t 4 -1 -3 2 -1 -3 X
B S 1 6 .1 8 9 .0 0 2 .0 -7 5
35
1 0 8
3 2 k6
200
4 5
1 52
6
Figure 11.14. Overall, mounting and connection dimensions of Electric Motors 2,5-7,5
428
0,77
5
415
0,77
5
3110
1 0 7
2 8 0 0 ,4 0 5
135
0,35
135
0,35
7 5
1 8 0 2 4 5 0 ,3 5
2 2 0 0 ,3 5
135
0,35
4 7
3145
0,3
5
450
,35
8 p o rt 3 3+ 0 ,3 90
2 p o r t 5 2
214
0,57
51 1 2 2 -0,66
3 0 0
84
7 3 +0,26-1,29
7 3 +0,26-1,29
335
H8(+
0,08
9)
380
H9(+
0,14
)
O il
feed ing
S h o rt-c ircu iting ax is
O il
feed in g
In le t 4 -1 -3 2 -1 -3
B S 1 6 5 .1 8 9 .0 0 2 .0 -7 5
In le t 4 -2 -6 3 -1 -3
B S 1 6 5 .1 8 9 .0 0 2 .0 -7 5
W a te r in le t an d o u tle t
T o the s ta to r lin ing
660
1
600
0,87
5 250
0,57
5
Figure 11.15. Overall, mounting and connection dimensions of Electric Motors 4-220
40
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
2ЭКВ
Э4
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
Table 12. - Specifications of Electric Motors 24
7 1 7 0
1 1 5 0
6 1 0 2 4 0
6 3 5 2 7 0
3 8 0
6 1 5
1 6 p o r t 3 9
8080
170
170
207,
5
80
170
170
80
230
415
9 1 5 2 3
6 1 5
3 8 0
2 po rt 3 0
57
41
2 po rt G 1 /2 - B
1 2 0 1 8 0 8 0
Figure 12.- Overall, mounting and connection dimensions of Electric Motors 24-200
Electric MotorType
NominalWattage,
kW
SynchronousVelocity,
r/minSlidingmotion,
%
At nominal loadOutput-Input
Ratio,%cos
max
Mnom
start
Mnom
Istart
Inom
InertiaMoment,kg m2
Weight,kg
24-20024-200-2* taking into account the weight of the whole body unit without equipment
200 1500 3,8 91,0 0,84 6,09 1,35 1720*2,95 2,27
Electric Motors 24
Explosion-proof three-phase asynchronous Electric Motors with a short-circuited rotor of type 24are intended for an Electric Motor gear of clearing coal combines , 200, 200 in the shaftsdangerous under the contents of firedamp (methane) and finely pulverized coal.
Electric Motors have the following versions on explosion safety: 3 in accordance with GOST 12.2.020 (home market) and ExdI on GOST12.2.020 (export).
Electric Motors are produced according to specifications of Technical Conditions 3.09-00217159-067-96.Aspect of a climatic modification and a category of arranging of the Electric Motors produced for home
market and export deliveries to the countries with a temperate climate - 5, for export deliveries to thecountries with a damp and dry tropical climate - 5 in accordance with GOST 15150.
Electric Motors are oriented for operation in mode S4 in accordance with GOST 183 andGOST 28173. Parameters of mode S4: cyclic duration factor - 60%, number of switchings on at an hour -30, inertia factor - 2,5.
Electric Motors are oriented for operation from a circuit of three-phase alternate current by frequency50Hz and voltage 660/1140, 1000 and 1140V.
Protection index of Electric Motors from external effects - IP54 is in accordance with GOST 17494.Electric Motors have class insulation of thermal resistance in accordance with GOST 8865.Cooling method of Electric Motors - ICW37 is in accordance with GOST20459.The weight of Electric
Motors and specifications for a nominal operating mode at voltage 1140V and frequency 50Hz are given inTable 12.
The overall, mounting and connection dimensions of Electric Motors are given on Figure 12.
Electric Motors 2ЭКВЭ4
Explosion-proof three-phase asynchronous Electric Motors with a short-circuited rotor of type 2ЭКВЭ4 are intended for an Electric Motor gear of clearing coal combines РКУ, ГШ200Б, ГШ200В in the shafts dangerous under the contents of firedamp (methane) and finely pulverized coal. Electric Motors have the following versions on explosion safety: РВ3ВИа in accordance with GOST 12.2.020 (home market) and ExdI on GOST12.2.020 (export).
Electric Motors are produced according to specif ications of Technical Conditions ТУ У 3.09-00217159-067-96.
Aspect of a climatic modification and a category of arranging of the Electric Motors produced for home market and export deliveries to the countries with a temperate climate - У5, for export deliver-ies to the countries with a damp and dry tropical climate - Т5 in accordance with GOST 15150.
Electric Motors are oriented for operation in mode S4 in accordance with GOST 183 and GOST 28173. Parameters of mode S4: cyclic duration factor - 60%, number of switchings on at an hour - 30, inertia factor - 2,5.
Electric Motors are oriented for operation from a circuit of three-phase alternate current by fre-quency 50Hz and voltage 660/1140, 1000 and 1140V.
Protection index of Electric Motors from external effects - IP54 is in accordance with GOST 17494.
Electric Motors have class insulation of thermal resistance Н in accordance with GOST 8865.Cooling method of Electric Motors - ICW37 is in accordance with GOST 20459.The weight of Electric Motors and specifications for a nominal operating mode at voltage 1140V
and frequency 50Hz are given in Table 12.The overall, mounting and connection dimensions of Electric Motors are given on Figure 12.
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
41
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
2ЭДКОФ(В)250, 3ЭДКОФ
250Electric Motors 2ЭДКОФ(В)250 and 3ЭДКОФ250
Explosion-proof three-phase asynchronous Electric Motors with a short-circuited rotor of types 2ЭДКОФ(B)250 and 3ЭДКОФ250 are intended for a multimotive Electric motor gear scraper and belt conveyors, overburden and roadheader combines in the shafts dangerous under the contents of firedamp (methane) and finely pulverized coal.
Electric Motors have the following versions on explosion safety: РВ3ВИа in accordance with GOST 12.2.020 (home market), PBExdI on GOST R 51330.0 (export to Russia and the CIS countries), ExdI in accordance with GOST 12.2.020 (export to other countries).
Electric Motors are produced according to specifications of Technical Conditions ТУ У 31.1-05758925-005:2006. Aspect of a climatic modification and a category of arranging of the Electric Motors produced for home
market and export deliveries to the countries with a temperate climate - У2,5, for export deliveries to the countries with a damp and dry tropical climate - Т2,5 in accordance with GOST 15150.
Nominal operating mode of Electric Motors - S1 is in accordance with GOST 183 and GOST 28173. Operation of Electric Motors in mode S2 with duration of the period of a constant rated load of 60 minutes and an interval between switchings on of 12,8 hours is acceptable. Operation of Electric Motors in modes S3 and S4 with cyclic duration factor of 60% and inertia factor 2,0 is acceptable. The acceptable power rating in modes S3 and S4 corresponds to the power for mode S1.
Electric Motors are oriented for operation from a circuit of three-phase alternate current by voltage 500, 1000 and 1140/660V at frequency of 50 Hz, and also voltage 660V at frequency 60Hz. The excep-tion is made by Electric Motors: 2ЭДКОФ250М4 - voltages 500 and 660/380V at frequency 50Hz, and also 660V at frequency 60Hz; 2ЭДКОФВ250М4 - voltages 1000 and 1140/660V at frequency 50Hz; 3ЭДКОФ250L4 - voltages 500, 660/380, 1000 and 1140/660V at frequency 50Hz, and also 660V at fre-quency 60Hz.
Protection index of Electric Motors from external effects - IP54 is in accordance with GOST 17494, protection index of the fan from air input - IP20 is in accordance with GOST 17494.
Electric Motors have class insulation of thermal resistance Н in accordance with GOST 8865. Versions on a mounting mode - IM1001, IM4001 and M9701 are in accordance with GOST 2479. The input device is fixed on the right if to take a detached view from the appearing end of the shaft. Cooling method of Electric Motors - IC0141 is in accordance with GOST 20459. The weight of Electric Motors and specifications for a nominal operating mode at voltage 1140/660V
(for the Electric Motor 2ЭДКОФ250М4 - at voltage 660/380V) and frequency 50Hz are also given in Table 13.1.
The overall, mounting and connection dimensions of Electric Motors are given on Figures 13.1 - 13.5 and in Table 13.2.
Table 13.1 - Specifications of Electric Motors 2()250 and 3250
Electric Motors 2()250 and 3250
Explosion-proof three-phase asynchronous Electric Motors with a short-circuited rotor of types2(B)250 and 3250 are intended for a multimotive Electric motor gear scraper and beltconveyors, overburden and roadheader combines in the shafts dangerous under the contents of firedamp(methane) and finely pulverized coal.Electric Motors have the following versions on explosion safety: 3 in accordance with
GOST 12.2.020 (home market), PBExdI on GOST R 51330.0 (export to Russia and the CIS countries),ExdI in accordance with GOST 12.2.020 (export to other countries).Electric Motors are produced according to specifications of Technical Conditions
31.1-05758925-005:2006.Aspect of a climatic modification and a category of arranging of the Electric Motors produced for home
market and export deliveries to the countries with a temperate climate - 2,5, for export deliveries tothe countries with a damp and dry tropical climate - 2,5 in accordance with GOST 15150.Nominal operating mode of Electric Motors - S1 is in accordance with GOST 183 and GOST 28173.
Operation of Electric Motors in mode S2 with duration of the period of a constant rated load of 60minutes and an interval between switchings on of 12,8 hours is acceptable. Operation of Electric Motorsin modes S3 and S4 with cyclic duration factor of 60% and inertia factor 2,0 is acceptable. The acceptablepower rating in modes S3 and S4 corresponds to the power for mode S1.Electric Motors are oriented for operation from a circuit of three-phase alternate current by voltage 500,
1000 and 1140/660V at frequency of 50 Hz, and also voltage 660V at frequency 60Hz. The exception ismade by Electric Motors: 22504 - voltages 500 and 660/380V at frequency 50Hz, and also 660Vat frequency 60Hz; 22504 - voltages 1000 and 1140/660V at frequency 50Hz; 3250L4- voltages 500, 660/380, 1000 and 1140/660V at frequency 50Hz, and also 660V at frequency 60Hz.Protection index of Electric Motors from external effects - IP54 is in accordance with GOST 17494,
protection index of the fan from air input - IP20 is in accordance with GOST 17494.Electric Motors have class insulation of thermal resistance in accordance with GOST 8865.Versions on a mounting mode - IM1001, IM4001 and M9701 are in accordance with GOST 2479.The input device is fixed on the right if to take a detached view from the appearing end of the shaft.Cooling method of Electric Motors - IC0141 is in accordance with GOST 20459.The weight of Electric Motors and specifications for a nominal operating mode at voltage 1140/660V
(for the Electric Motor 22504 - at voltage 660/380V) and frequency 50Hz are also given inTable 13.1.The overall, mounting and connection dimensions of Electric Motors are given on Figures 13.1 - 13.5
and in Table 13.2.
Electric MotorType
NominalWattage,kW
At nominal loadmax
Mnom
start
Mnom
IstartInom
InertiaMoment,kg m2
Weight, kg SynchronousVelocity,r/min
Allowablepowerin mode
S2-60 min.,kW
Slidingmotion,
%
Output-InputRatio,%
cos IM1001 IM4001 IM9701
2250M42250M4*
5555
1,51,5
92,592,5
0,850,86
3,13,1
3,23,2
7,57,5
0,60,6
--
505505
515515
1500
75
2250LA4 90 1,8 93,0 0,85 3,3 3,2 7,5 1,05 - 700 720 1102B250LB4 110 1,8 93,2 0,85 3,2 3,2 7,5 1,14 - 720 740 1323250M4 55 1,5 92,6 0,86 3,4 3,3 7,5 0,54 - 480 495 753250L4 75 1,3 93,2 0,85 3,1 3,2 7,7 0,88 - 680 700 903250L4-13250LA4 90 1,8 93,0 0,85 3,3 3,3 7,5 1,05 - 740 760 1103250LA4-13250LB4 110 1,8 93,2 0,85 3,2 3,2 7,5 1,14 - 780 800 1323250LB4-13250LB4-3 110 1,8 93,2 0,85 3,2 3,2 7,5 1,14 810 - - 1323250LC4 132 1,8 93,4 0,85 3,2 3,2 7,5 1,22 - 840 860 1603250LC4-13250LC4-3 132 1,8 93,4 0,85 3,2 3,2 7,5 1,22 870 - - 1603250LD4 160 1,3 94,5 0,86 3,5 2,8 8,6 2,44 - 940 960 1803250LD4-13250LB6 75 1,8 92,5 0,80 2,7 3,0 7,5 1,88 - 870 780
1000903250LB6-1
3250LC6 90 1,6 92,0 0,77 3,0 3,2 7,0 2,05 - 870 890 1103250LC6-1* Specifications for Electric Motors with power 660/380 V.
75
42
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
2ЭДК
ОФ(В
)250
, 3ЭД
КОФ
250
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
Table13
.2-O
verall,
mou
ntingan
dco
nnectio
ndimen
sion
sof
ElectricMotors2
(
)250
and3
25
0
ElectricMotor
Type
Fig.
l 1l 1
0l 2
1l 3
0l 3
1l 3
9l 9
0d 1
d 20d 2
4d 2
5d 3
0d 3
5n
20
B1
23
22
21
b 1b 1
0b 3
1b 3
2h
h 1h 5
2
25
0M4
(IM40
01)
13.1
76-
22
85517515
,52,5
3260
5205
70470 50
012
8-
240
2730'
25
-18
406
446
260
-
1164
2
25
0M4
(M97
01)
13.2
349
72,5
5005
50
-
250
2
2
50M4
13.1(2)
105
870
168
02,5
2230'
250
-45
45
406
2
2
50LA
4130
1125
4580
1222
250
2088
2
B25
0LB4
1155
3
25
0M4
13.3(4).1
768301751
5,52,532
605205
70470 48
812
8-
240
2730'
25
-18
410
260
-
1164
3
25
0L4
130
42
1055
168
02,5
45
5005
50450
1222
30'
250
-
45
45
22
250
2088
3
25
0L4-1
13.3(4)105
1030
--
-
3
25
0LA4
13.3(4)130
1135
2220
88
3
25
0LA4-1
13.3(4)105
1110
--
-
3
25
0LB4
13.3(4)130
1165
2220
88
3
25
0LB4-1
13.3(4)105
1140
--
-
3
25
0LB4-3
13.5
130
-11
32-
--
-476
--
250
--
22418238
28020
883
25
0LC4
13.3(4)
4212
350 2,5
5005
504504
8812
2230'
410250
-3
25
0LC4-1
13.3(4)105
1210
--
-
3
25
0LC4-3
13.5
130
-11
32-
--
-476
--
250
--
22418238
25020
883
25
0LD4
13.3(4)
42
1275
0 2,5
5005
504504
8812
2230'
250
45
45
410250
-
3
25
0LD4-113
.3(4)105
1250
--
-
3
25
0LB6
13.3(4)130
1135
2220
88
3
25
0LB6-1
13.3(4)105
1110
--
-
3
25
0LC6
13.3(4)130
1235
2220
88
3
25
0LC6-1
13.3(4)105
1210
--
-
450
80 - 80 - 80 - 80 80 - 80 80 - 80 - 80 -
16
16
45
45
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
43
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
2ЭДКОФ(В)250, 3ЭДКОФ
250
Figure 13.1. Overall, mounting and connection dimensions of Electric Motors2 250, 2 Version IM4001
h 1
h 5
l 90
2 po rt d 35
b 1d 1
l 1
l 39 l21
d 30
d 25
5l 30
Figure 13.2. Overall, mounting and connection dimensions of Electric Motors2 250, 2, Version M9701.
Other see Figure 13.1
4 p o r t 2 4
l 10l 31
b 32 b 31
n p o r t 2 4
B1
21
b 10
18
d 24
d 20
h
20
B1
22
23
44
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
2ЭДК
ОФ(В
)250
, 3ЭД
КОФ
250
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
Figure 13.3. Overall, mounting and connection dimensions of Electric Motors3250, Version IM4001
l 90
2 po rt d 35
h 1
h 5
l 90
2 po rt d 35
b 1d 1
l 1
l 39 l 21
d 30
d 25
5l 30
Figure 13.4. Overall, mounting and connection dimensions of Electric Motors3250, Version M9701. Other see Figure 13.3
4 po rt 2 4l 10l 31
b 32 b 31
n po rt 2 4
B1
21
b 10
d 1 0 -7 2H 8h 8 x8 2
H 1 2d 1 1 x1 2
D 1 0d 1 0
d 24
d 20
h
20
B1
22
Figure 13.5. Overall, mounting and connection dimensions of Electric Motors3250LB4-3, 3250LC4 Version IM1001.
4 p o r t 2 4
l 10l 31
b 10
h
18
18
h 1
h 5
l 90
2po
rtd 35
b 1
d 1
b 32 b 31
l 1
d 30
l 30
2 3
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
45
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
ЭДКОФВ315
Table 14.1 - Specifications of Electric Motors 315
Electric MotorType
NominalWattage,
kW
OperationMode
SynchronousVelocity,
r/minSlidingmotion,
%
At nominal load
Output-Input
Ratio,%cos
max
Mnom
start
Mnom
Istart
Inom
InertiaMoment,kg m2
Weight,kg
3154160 S1 1500 1,1 94,0 0,85 3,0 2,5 7,0
2,0 1060185 S4 1500 1,3 94,0 0,85 2,6 2,2
3154-2
315S4315S4-1315S4-2315S4-2-1315A4315A4-1315L4315L4-1315LA4315LA4-1
160 S1 1500 0,8 93,0 0,84 3,0 8,62,2
3,1
3,1
3,6
4,4
5,2
1060
875
985
1200
1300
185
160
200
250
280
S4
S1
S1
S1
S1
1,0
1,1
1,2
1,2
1,2
93,0
93,6
94,1
94,8
94,8
0,85
0,85
0,83
0,85
0,86
0,87
3,5
3,5
3,6
3,6
3,6
3,9
7,8
8,6
8,7
8,6
8,6
8,6
1500
1500
1500
1500
1500
4,02,6
3,0
3,2
3,1
3,2
4,0
6,0
Electric Motors 315
with a short-circuited rotor of type315 are intended for an Electric Motor gear of scraper and belt conveyors, excavation units,roadheader combines and other gears used in the shafts dangerous under the contents of firedamp(methane) and finely pulverized coal.
Electric Motors have the following versions on explosion safety: 3 in accordance with GOST12.2.020 (home market) and ExdI in accordance with GOST 12.2.020 (export).
Electric Motors are produced according to specifications of Technical Conditions 31.1-05758925-005:2006.
Aspect of a climatic modification and a category of arranging of the Electric Motors produced forhome market and export deliveries to the countries with a temperate climate - 2,5, for export deliveriesto the countries with a damp and dry tropical climate - 2,5 in accordance with GOST 15150.
Nominal Operating modes of Electric Motors - S1 and S4 are in accordance with GOST 183 andGOST 28173. Parameters of mode S4: cyclic duration factor - 60%, number of switchings on at hour 20,inertia factor - 1,2.
Electric Motors are oriented for operation from a circuit of three-phase alternate current by voltage1000V at frequency of 50 Hz, and also voltage 1140/660V at frequency 50 and 60Hz.
Protection index of Electric Motors from external effects - IP54 is in accordance with GOST 17494,protection index of the fan from air input - IP20 is in accordance with GOST 17494.
Electric Motors have class insulation of thermal resistance in accordance with GOST 8865.Version on a mounting mode - IM4001 is in accordance with GOST 2479.The input device is fixed on the right if to take a detached view from the appearing end of the shaft.Cooling method of Electric Motors - IC0141 is in accordance with GOST 20459.The weight of Electric Motors and specifications for a nominal operating mode at voltage 1140/660V
and frequency 50Hz are given in Table 14.1.The overall, mounting and connection dimensions of Electric Motors are given on Figure 14.1,
14.2 and in Table 14.2.
Electric Motors ЭДКОФВ315
Explosion-proof three-phase asynchronous Electric Motors with a short-circuited rotor of type ЭДКОФВ315 are intended for an Electric Motor gear of scraper and belt conveyors, excavation units, roadheader combines and other gears used in the shafts dangerous under the contents of firedamp (methane) and finely pulverized coal.
Electric Motors have the following versions on explosion safety: РВ3ВИа in accordance with GOST 12.2.020 (home market) and ExdI in accordance with GOST 12.2.020 (export).
Electric Motors are produced according to specif ications of Technical Conditions ТУ У 31.1-05758925-005:2006.
Aspect of a climatic modification and a category of arranging of the Electric Motors produced for home market and export deliveries to the countries with a temperate climate - У2,5, for export deliver-ies to the countries with a damp and dry tropical climate - Т2,5 in accordance with GOST 15150.
Nominal Operating modes of Electric Motors - S1 and S4 are in accordance with GOST 183 and GOST 28173. Parameters of mode S4: cyclic duration factor - 60%, number of switchings on at hour 20, inertia factor - 1,2.
Electric Motors are oriented for operation from a circuit of three-phase alternate current by voltage 1000V at frequency of 50 Hz, and also voltage 1140/660V at frequency 50 and 60Hz.
Protection index of Electric Motors from external effects - IP54 is in accordance with GOST 17494, protection index of the fan from air input - IP20 is in accordance with GOST 17494.
Electric Motors have class insulation of thermal resistance Н in accordance with GOST 8865.Version on a mounting mode - IM4001 is in accordance with GOST 2479.The input device is fixed on the right if to take a detached view from the appearing end of the shaft.Cooling method of Electric Motors - IC0141 is in accordance with GOST 20459.The weight of Electric Motors and specifications for a nominal operating mode at voltage
1140/660V and frequency 50Hz are given in Table 14.1. The overall, mounting and connection dimensions of Electric Motors are given on Figure 14.1,
14.2 and in Table 14.2.
46
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
ЭДКО
ФВ3
15
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
170
1180
02,5 21
580
550
6310
660
600
310
310
452230'
80
14
85
452 port M16
22
465
Figure 14.1. Overall, mounting and connection dimensions of Electric Motors315M4, 315M4-2
45Oil feeding
12po
rt2
4
45
2 port M16
Figure 14.2.2
14
95
45
2 port M1625
90
Figure 14.2.1
l1
02,5 49
640
550
6l30
300 488
660
600 12 port 24
300
300
45 2230' 45
d10-82H8h8 x92
H12d11 x12
D10d10
Electric MotorType Figure l1 , mm l30 , mm Weight, kg
315S4315S4-1315S4-2315S4-2-1315A4315A4-1315L4315L4-1315LA4315LA4-1
14.2.114.2.214.2.114.2.214.2.114.2.214.2.114.2.214.2.114.2.2
170105170105170105170105170105
1075101010751010113510701217115013051240
875
985
1200
1300
Figure 14.2. Overall, mounting and connection dimensions of Electric Motors 315-4
Table 14.2. Overall, mounting and connection dimensions of Electric Motors315-4
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
47
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
ЭДКВФTable 15.1. - Specifications of Electric Motors
Electric MotorType
NominalWattage,
kW
SynchronousVelocity,
r/minSliding
motion,%
At nominal loadOutput-Input
Ratio,% cos
max
Mnom
start
Mnom
Istart
Inom
InertiaMoment,kg m2
Weight,kg
250S4 110 1500 2,1 93,0 0,83 3,44 3,51 8,0 1,01 7402504 132 1500 2,1 93,2 0,83 3,39 3,51 1,14 800250L4 160 1500 2,1 93,3 0,84 3,47 8,0 1,22 880250LA4 200 1,4 93,0 0,83 2,36 8,0 1,30 990315S4 200 1500 1,4 94,0 0,86 3,10 8,0 4,20 1100315M4 250 1,4 94,2 0,87 3,10 7,5 4,80 1200315L4 315 1500 1,3 94,3 0,86 3,10 7,5 5,20 1380315LA4 375 1500 1,3 94,5 0,86 2,90 6,8 5,60 1560315S12/4 45/132 2,0/1,7 0,48/0,83 3,4/2,5 3,8/7,8 5,40 1090315M12/4 55/160 500/1500 2,0/1,0 82,5/93,0 0,50/0,85 -/3,1 3,4/2,6 3,6/8,0 5,70 1270315L12/4 65/200 83,8/93,2 -/3,0 2,8/2,3 6,40 1450315LA12/4355S4355M4355L4355S12/4355M12/4355L12/4
85/250400450500
85/250105/315132/400
500/1500150015001500
500/1500500/1500500/1500
2,8/1,21,51,82,0
3,0/1,02,0/0,932,9/1,8
84,0/93,194,094,194,5
88,6/94,086,0/92,089,5/93,1
0,60/0,860,850,860,86
0,6/0,870,55/0,850,64/0,89
-/2,73,02,903,00
-/2,75-/2,5-/2,0
2,8/2,33,203,003,20
2,55/1,972,7/1,83,3/1,8
3,5/7,08,07,57,0
3,6/7,23,3/6,44,8/7,9
7,207,607,808,008,108,5310,7
1630194020302170180019402160
1500
1500
500/1500
500/1500
82,5/91,0
2,1/1,1
3,28
3,30
3,10-/3,2
2,902,90
3,8/7,40,52/0,86
3,40
8,0
Electric Motors Explosion-proof three-phase asynchronous Electric Motors with a short-circuited rotor of type B
are intended for an Electric Motor gear of chain-and-flight conveyors in the shafts dangerous under thecontents of firedamp (methane) and finely pulverized coal.
Electric Motors have the following versions on explosion safety: 3 in accordance withGOST 12.2.020 (home market), ExdI in accordance with GOST R 51330.0 (export to Russia and theCIS countries), ExdI in accordance with GOST 12.2.020 (export to other countries).
Electric Motors are produced according to specifications of Technical Conditions 31.1-05758925-012:2006.Aspect of a climatic modification and a category of arranging of the Electric Motors produced for home
market and export deliveries to the countries with a temperate climate - 2,5, for export deliveries to thecountries with a damp and dry tropical climate - 2,5 in accordance with GOST 15150.
Nominal operating mode of Electric Motors - S1 is in accordance with GOST 183 and GOST 28173.Operation of one-high-speed Electric Motors in mode S4 which is in accordance with GOST 183 andGOST 28173 with cyclic duration factor of 60%, number of switchings on at an hour 40 (Electric Motorswith power to 250kW) or 20 (Electric Motors with power 250kW and above) and inertia factor 1,2(Electric Motors with power to 250kW) or 2,5 (Electric Motors with power 250kW and above) isacceptable. Operation of double-speed Electric Motors in mode S4 which is in accordance with GOST 183and GOST 28173 with cyclic duration factor of 60%, number of switchings on at an hour 75 (ElectricMotors with power to 85/280kW) or 30 (Electric Motors with power 85/280kW and above) and inertiafactor 1,7 (Electric Motors with power to 85/280kW) or 2,5 (Electric Motors with power 85/280kW andabove) is acceptable.
Electric Motors are oriented for operation from a circuit of three-phase alternate current by frequency50Hz. One-high-speed Electric Motors to 200kW inclusively and double-speed Electric Motors with powerto 65/200kW are inclusively produced by power on voltages 660, 1000 and 1140V. One-high-speedElectric Motors over 200 kW and double-speed Electric Motors with power from above 65/200kW areproduced by power on voltages 1000 and 1140V.
Protection index of Electric Motors from external effects - IP55 is in accordance with GOST 17494.Electric Motors have class insulation of thermal resistance in accordance with GOST 8865.The input device of Electric Motors B250 is fixed on an engine support on the right if to take a
detached view from the appearing end of the shaft. The input device of Electric Motors B315 andB355 is fixed on end shield from the side opposite to the appearing end of the shaft.
Cooling method of Electric Motors - ICW37 is in accordance with GOST 20459.The weight of Electric Motors and specifications for a nominal operating mode at voltage 1140V and
frequency 50Hz are given in Table 15.1.The overall, mounting and connection dimensions of Electric Motors are given on Figures 15.1 -
15.3 and in Table 15.2.
Electric Motors ЭДКВФ
Explosion-proof three-phase asynchronous Electric Motors with a short-circuited rotor of type ЭДКBФ are intended for an Electric Motor gear of chain-and-flight conveyors in the shafts dangerous under the contents of firedamp (methane) and finely pulverized coal.
Electric Motors have the following versions on explosion safety: РВ3ВИа in accordance with GOST 12.2.020 (home market), РВExdI in accordance with GOST R 51330.0 (export to Russia and the CIS countries), ExdI in accordance with GOST 12.2.020 (export to other countries).
Electric Motors are produced according to specifications of Technical Conditions ТУ У 31.1-05758925-012:2006.Aspect of a climatic modification and a category of arranging of the Electric Motors produced for home
market and export deliveries to the countries with a temperate climate - У2,5, for export deliveries to the countries with a damp and dry tropical climate - Т2,5 in accordance with GOST 15150.
Nominal operating mode of Electric Motors - S1 is in accordance with GOST 183 and GOST 28173. Operation of one-high-speed Electric Motors in mode S4 which is in accordance with GOST 183 and GOST 28173 with cyclic duration factor of 60%, number of switchings on at an hour 40 (Electric Motors with power to 250kW) or 20 (Electric Motors with power 250kW and above) and inertia factor 1,2 (Electric Motors with power to 250kW) or 2,5 (Electric Motors with power 250kW and above) is acceptable.
Operation of double-speed Electric Motors in mode S4 which is in accordance with GOST 183 and GOST 28173 with cyclic duration factor of 60%, number of switchings on at an hour 75 (Electric Motors with power to 85/280kW) or 30 (Electric Motors with power 85/280kW and above) and inertia factor 1,7 (Electric Motors with power to 85/280kW) or 2,5 (Electric Motors with power 85/280kW and above) is acceptable.
Electric Motors are oriented for operation from a circuit of three-phase alternate current by frequency 50Hz. One-high-speed Electric Motors to 200kW inclusively and double-speed Electric Motors with power to 65/200kW are inclusively produced by power on voltages 660, 1000 and 1140V. One-high-speed Electric Motors over 200 kW and double-speed Electric Motors with power from above 65/200kW are produced by power on voltages 1000 and 1140V.
Protection index of Electric Motors from external effects - IP55 is in accordance with GOST 17494.Electric Motors have class insulation of thermal resistance Н in accordance with GOST 8865.The input device of Electric Motors ЭДКBФ250 is fixed on an engine support on the right if to take a
detached view from the appearing end of the shaft. The input device of Electric Motors ЭДКBФ315 and ЭДКBФ355 is fixed on end shield from the side opposite to the appearing end of the shaft.
Cooling method of Electric Motors - ICW37 is in accordance with GOST 20459.The weight of Electric Motors and specifications for a nominal operating mode at voltage 1140V and
frequency 50Hz are given in Table 15.1. The overall, mounting and connection dimensions of Electric Motors are given on Figures 15.1 -
15.3 and in Table 15.2.
48
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
ЭДКВ
Ф
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
450
02,5 42
5l30
460
2230'
4545
550
500
250
250
250 430 12 port 24
20
88
22
45
2 port M16
80
440l1
Table 15.2. - Overall, mounting and connection dimensions of Electric Motors
Figure 15.1. Overall, mounting and connection dimensions of Electric Motors 250
Electric MotorType Figure l1 , mm l30 , mm
250S4 15.1 130 1007250M4 15.1 130 1057250L4 15.1 130 1127250LA4 15.1 130 1167315S4 15.2.1 170 1165315S4-1 15.2.2 105 1100315M4 15.2.1 170 1215315M4-1 15.2.2 105 1150315L4 15.2.1 170 1285315L4-1 15.2.2 105 1220315LA4 15.2.1 170 1345315LA4-1 15.2.2 105 1280315S12/4 15.2.1 170 1155315S12/4-1 15.2.2 105 1090315M12/4 15.2.1 170 1255315M12/4-1 15.2.2 105 1190315L12/4 15.2.1 170 1315315L12/4-1 15.2.2 105 1250315LA12/4315LA12/4-1
355S4
355M4
355L4
355S12/4
355M12/4
355L12/4
15.2.115.2.215.3.115.3.215.3.115.3.215.3.115.3.215.3.115.3.215.3.115.3.215.3.115.3.2
170105210130210130210130210130210130210130
13751310142313431463138315131433131312331373129314631383
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
49
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
ЭДКВФ
2230'
223
0'
600
12po
rt2
4
Water inlet and outlet
300
300
300 300
660
Figure 15.2. Overall, mounting and connection dimensions of Electric Motors 315
550
90
l1
03 49
l30
45
14
95
25
45
2 port M16
45
2 port M16
d10-82H8h8 x92
H12d11 x12
D10d10
Figure 15.2.2Figure 15.2.1
60,15
45
740
12 port 24
680
100
l1
03 52
l30
800
223
0'
2230'
16
106
28
45
2 port M16
45
2 port M16
d10-92H8h8 x102
H12d11 x14
D10d10
Figure 15.3.2Figure 15.3.1
Figure 15.3. Overall, mounting and connection dimensions of Electric Motors 355
6
50
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
ЭДСВ
Ф
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
Electric Motors
Explosion-proof three-phase asynchronous Electric Motors with a short-circuited rotor of typesCB250 and CB315 are intended for an Electric Motor gear plow and scraper-plow installationsused in the shafts dangerous under the contents of firedamp (methane) and finely pulverized coal.
Electric Motors have the following versions on explosion safety: 3 in accordance withGOST 12.2.020 (home market), ExdI in accordance with GOST R 51330.0 (export to Russia and
the CIS countries), ExdI in accordance with GOST 12.2.020 (export to other countries).Electric Motors are produced according to specifications of Technical Conditions 31.1-05758925-012:2006.Aspect of a climatic modification and a category of arranging of the Electric Motors produced for home
market and export deliveries to the countries with a temperate climate - 5, for export deliveries tothe countries with a damp and dry tropical climate - 5 in accordance with GOST 15150.
Electric Motors are oriented for operation in mode S4 in accordance with GOST 183 and GOST 28173.Electric Motors are oriented for operation from a circuit of three-phase alternate current by voltage
1140/660V at frequency of 50 Hz.Protection index of Electric Motors from external effects - IP54 is in accordance with GOST 17494.Electric Motors have class insulation of thermal resistance in accordance with GOST 8865.Versions on a mounting mode - IM4001 is in accordance with GOST 2479.The input device is fixed on the right if to take a detached view from the appearing end of the shaft for
CB250 or from an electric motor back on end shield from opposite to the appearing end of the shaft.Cooling method of Electric Motors - ICW37 is in accordance with GOST 20459.The weight of Electric Motors and specifications for a nominal operating mode are given in Table 16.1.The overall, mounting and connection dimensions of Electric Motors are given on Figures 16.1 - 16.2
and in Table 16.2.Table 16.1 - Specifications of Electric Motors C
Electric MotorType
NominalWattage,
kW
SynchronousVelocity,
r/minSliding
motion,%
At nominal loadOutput-Input
Ratio,% cos
max
Mnom
start
Mnom
Istart
Inom
InertiaMoment,kg m2
C250S4 55 1500 1,9 92,5 0,86 3,2 3,7 8,5 0,79
C2504C250A4
C250SA490110
7515001500
15002,12,2
2,193,193,2
93,00,860,86
0,873,33,2
3,03,63,5
3,41,011,14
0,88
250L4 132 1500 2,2 93,4 0,87 3,4 8,0 1,22250LA4 160 2,1 93,5 0,85 3,2 8,0 1,30315S4 160 1500 1,4 90,0 0,84 4,2 9,8 4,2315M4 200 1,4 90,0 0,83 2,9 9,8 4,8315L4 250 1500 1,3 91,0 0,88 2,5 9,8 5,2315LA4 315 1500 1,3 90,0 0,87 3,6 9,8 5,6
1500
1500
3,1
2,9
2,7
4,13,6
3,4
8,08,0
8,3
Table 16.2 - Overall, mounting and connection dimensions of Electric Motors
Electric Motor Type Figure l1 , mm l30 , mm n Weight, kg
C250S4
16.1 130
867 - 620C250SA4 947
4
670C2504 1007 740C250A4 1057 800250L4 1127 880250LA4 1167 980315S4315S4-1
16.2.116.2.2
170105
11651100
-
1140
315M4315M4-1
16.2.116.2.2
170105
12151150 1240
315L4315M4-1
16.2.116.2.2
170105
12851220 1420
315LA4315M4-1
16.2.116.2.2
170105
13451280 1600
Electric Motors ЭДСВФ
Explosion-proof three-phase asynchronous Electric Motors with a short-circuited rotor of types ЭДCBФ250 and ЭДCBФ315 are intended for an Electric Motor gear plow and scraper-plow installations used in the shafts dangerous under the contents of firedamp (methane) and finely pulverized coal.
Electric Motors have the following versions on explosion safety: РВ3ВИа in accordance with GOST 12.2.020 (home market), РВExdI in accordance with GOST R 51330.0 (export to Russia and the CIS countries), ExdI in accordance with GOST 12.2.020 (export to other countries).
Electric Motors are produced according to specifications of Technical Conditions ТУ У 31.1-05758925-012:2006. Aspect of a climatic modification and a category of arranging of the Electric Motors produced for
home market and export deliveries to the countries with a temperate climate - У5, for export deliveries to the countries with a damp and dry tropical climate - Т5 in accordance with GOST 15150.
Electric Motors are oriented for operation in mode S4 in accordance with GOST 183 and GOST 28173. Electric Motors are oriented for operation from a circuit of three-phase alternate current by voltage
1140/660V at frequency of 50 Hz. Protection index of Electric Motors from external effects - IP54 is in accordance with GOST 17494. Electric Motors have class insulation of thermal resistance Н in accordance with GOST 8865. Versions on a mounting mode - IM4001 is in accordance with GOST 2479. The input device is fixed on the right if to take a detached view from the appearing end of the shaft
for ЭДCBФ250 or from an electric motor back on end shield from opposite to the appearing end of the shaft.
Cooling method of Electric Motors - ICW37 is in accordance with GOST 20459. The weight of Electric Motors and specifications for a nominal operating mode are given in Table
16.1. The overall, mounting and connection dimensions of Electric Motors are given on Figures 16.1 - 16.2
and in Table 16.2.
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
51
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
ЭДСВФ
450
02,5 42
5l30
460
2230'
4545
550
500
250
250
250 430
8 port 24
20
88
22
45
2port M16
80
440l1
Figure 16.1. Overall, mounting and connection dimensions of Electric Motors 250
2230'
223
0'
600
12po
rt2
4
Water inlet and outlet
300
300
300 300660
Figure 16.2. Overall, mounting and connection dimensions of Electric Motors 315
550
90
l1
03 49
l30
45
14
95
25
45
2 port M16
45
2 port M16
d10-82H8h8 x92
H12d11 x12
D10d10
Figure 16.2.2Figure 16.2.1
6
n port 24
300
160
52
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
ЭКВФ
315,
ЭКВФ
Т315
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
Electric MotorType
NominalWattage,
kW
SynchronousVelocity,
r/minSlidingmotion,
%
At nominal loadOutput-Input
Ratio,%cos
max
Mnom
start
Mnom
Istart
Inom
InertiaMoment,kg m2
Weight,kg
31512/4 55/160 500/1500 2,3/1,2 84,5/93,0 0,54/0,80 -/3,1 3,1/2,6 3,28/7,16 4,51 1380+6,5
315L12/4
315M12/4
315L12/4
Note - The figure in the numerator / denominator correspond to the shunting / working synchronous rotationfrequencies 500/1500 rev / min, respectively.
65/200
55/160
65/200
500/1500
500/1500
500/1500
3,5/1,3
2,3/1,2
3,5/1,3
84,5/93,0
84,5/93,0
84,5/93,0
0,54/0,81
0,54/0,80
0,54/0,81
-/2,8
-/3,1
-/2,8
3,1/2,4
3,1/2,6
3,1/2,4
5,04
4,51
5,04
1485+7,4
1260+6
1360+6
3,76/6,46
3,28/7,16
3,76/6,46
Table 17.1. - Specifications of Electric Motors 315 and 315
Electric MotorType 1 l, mm l1 , mm l30 , mm
31512/4d10-82h892d1112d10 Centering port H M24
GOST 14034-74924
70 min1167
d10-72h882d1112d10 Centering port H M20GOST 14034-74 60 min
315L12/4
315L12/4
315M12/4
1222
1123
1068
d10-82h892d1112d10
-
-
Centering port H M24GOST 14034-74
-
-
979
979
924
70 min
785
730
Table 17.2. - Overall, mounting and connection dimensions of Electric Motors 315 and 315
Electric Motors 315 and 315
Explosion-proof three-phase double-speed asynchronous Electric Motors with a short-circuited rotorof type KB315 and KB315 are intended for an Electric Motor gear of chain-and-flight conveyors26 and 27 used in the shafts dangerous under the contents of firedamp (methane) and finelypulverized coal.
Electric Motors have the following versions on explosion safety: 3 on GOST12.2.020 (homemarket) and ExdiI in accordance with GOST R 51330.0 (export to Russia and the CIS countries).
Electric Motors are produced according to specifications of Technical Conditions 31.1-00217159-062-2004.Aspect of a climatic modification and a category of arranging of Electric Motors - 5 is in
accordance with GOST 15150.Nominal operating mode of Electric Motors - S1 is in accordance with GOST 183 and
GOST 28173. Operation of Electric Motors in mode S4 on GOST183 and GOST 28173 with cyclicduration factor of 90%, number of switchings on at an hour on the lowest rate 120, on the highest rate- 80 and inertia factor 2,5 is acceptable. Thus the number of switchings on the higher rate during 10 min.should be no more than 20.
Electric Motors are oriented for operation from a circuit of three-phase alternate current byfrequency 50Hz and voltage 660 or 1140V.
Protection index of Electric Motors from external effects - IP55 is in accordance with GOST 17494.Electric Motors have class insulation of thermal resistance in accordance with GOST 8865.The input device is fixed from an Electric Motor back on end shield from the side opposite to a
running end of the shaft.Cooling method of Electric Motors - ICW37 is in accordance with GOST 20459.The weight of Electric Motors and specifications for a nominal operating mode at voltage 660 and
1140V and frequency 50Hz are given in Table 17.1.The overall, mounting and connection dimensions of Electric Motors are given on Figures 17.1 -
17.2 and in Table 17.2.
Electric MotorType
NominalWattage,
kW
SynchronousVelocity,
r/minSlidingmotion,
%
At nominal loadOutput-Input
Ratio,%cos
max
Mnom
start
Mnom
Istart
Inom
InertiaMoment,kg m2
Weight,kg
31512/4 55/160 500/1500 2,3/1,2 84,5/93,0 0,54/0,80 -/3,1 3,1/2,6 3,28/7,16 4,51 1380+6,5
315L12/4
315M12/4
315L12/4
Note - The figure in the numerator / denominator correspond to the shunting / working synchronous rotationfrequencies 500/1500 rev / min, respectively.
65/200
55/160
65/200
500/1500
500/1500
500/1500
3,5/1,3
2,3/1,2
3,5/1,3
84,5/93,0
84,5/93,0
84,5/93,0
0,54/0,81
0,54/0,80
0,54/0,81
-/2,8
-/3,1
-/2,8
3,1/2,4
3,1/2,6
3,1/2,4
5,04
4,51
5,04
1485+7,4
1260+6
1360+6
3,76/6,46
3,28/7,16
3,76/6,46
Table 17.1. - Specifications of Electric Motors 315 and 315
Electric MotorType 1 l, mm l1 , mm l30 , mm
31512/4d10-82h892d1112d10 Centering port H M24
GOST 14034-74924
70 min1167
d10-72h882d1112d10 Centering port H M20GOST 14034-74 60 min
315L12/4
315L12/4
315M12/4
1222
1123
1068
d10-82h892d1112d10
-
-
Centering port H M24GOST 14034-74
-
-
979
979
924
70 min
785
730
Table 17.2. - Overall, mounting and connection dimensions of Electric Motors 315 and 315
Electric Motors 315 and 315
Explosion-proof three-phase double-speed asynchronous Electric Motors with a short-circuited rotorof type KB315 and KB315 are intended for an Electric Motor gear of chain-and-flight conveyors26 and 27 used in the shafts dangerous under the contents of firedamp (methane) and finelypulverized coal.
Electric Motors have the following versions on explosion safety: 3 on GOST12.2.020 (homemarket) and ExdiI in accordance with GOST R 51330.0 (export to Russia and the CIS countries).
Electric Motors are produced according to specifications of Technical Conditions 31.1-00217159-062-2004.Aspect of a climatic modification and a category of arranging of Electric Motors - 5 is in
accordance with GOST 15150.Nominal operating mode of Electric Motors - S1 is in accordance with GOST 183 and
GOST 28173. Operation of Electric Motors in mode S4 on GOST183 and GOST 28173 with cyclicduration factor of 90%, number of switchings on at an hour on the lowest rate 120, on the highest rate- 80 and inertia factor 2,5 is acceptable. Thus the number of switchings on the higher rate during 10 min.should be no more than 20.
Electric Motors are oriented for operation from a circuit of three-phase alternate current byfrequency 50Hz and voltage 660 or 1140V.
Protection index of Electric Motors from external effects - IP55 is in accordance with GOST 17494.Electric Motors have class insulation of thermal resistance in accordance with GOST 8865.The input device is fixed from an Electric Motor back on end shield from the side opposite to a
running end of the shaft.Cooling method of Electric Motors - ICW37 is in accordance with GOST 20459.The weight of Electric Motors and specifications for a nominal operating mode at voltage 660 and
1140V and frequency 50Hz are given in Table 17.1.The overall, mounting and connection dimensions of Electric Motors are given on Figures 17.1 -
17.2 and in Table 17.2.
Electric Motors ЭКВФ315 and ЭКВФТ315
Explosion-proof three-phase double-speed asynchronous Electric Motors with a short-circuited rotor of type ЭKBФ315 and ЭKBФТ315 are intended for an Electric Motor gear of chain-and-flight conveyors КСД26В and КСД27 used in the shafts dangerous under the contents of firedamp (methane) and finely pulverized coal.
Electric Motors have the following versions on explosion safety: РВ3ВИа on GOST12.2.020 (home market) and РВExdiаI in accordance with GOST R 51330.0 (export to Russia and the CIS countries).
Electric Motors are produced according to specifications of Technical Conditions ТУ У 31.1-00217159-062-2004.Aspect of a climatic modification and a category of arranging of Electric Motors - У5 is in accordance
with GOST 15150.Nominal operating mode of Electric Motors - S1 is in accordance with GOST 183 and GOST 28173.
Operation of Electric Motors in mode S4 on GOST183 and GOST 28173 with cyclic duration factor of 90%, number of switchings on at an hour on the lowest rate 120, on the highest rate - 80 and inertia factor 2,5 is acceptable. Thus the number of switchings on the higher rate during 10 min. should be no more than 20.
Electric Motors are oriented for operation from a circuit of three-phase alternate current by frequency 50Hz and voltage 660 or 1140V.
Protection index of Electric Motors from external effects - IP55 is in accordance with GOST 17494.Electric Motors have class insulation of thermal resistance Н in accordance with GOST 8865.The input device is fixed from an Electric Motor back on end shield from the side opposite to a running
end of the shaft.Cooling method of Electric Motors - ICW37 is in accordance with GOST 20459.The weight of Electric Motors and specifications for a nominal operating mode at voltage 660 and
1140V and frequency 50Hz are given in Table 17.1.The overall, mounting and connection dimensions of Electric Motors are given on Figures 17.1 - 17.2
and in Table 17.2.
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
53
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
ЭКВФ315, ЭКВФ
Т315
550
75
l1
l30
l
553,511H GOST 6033
Figure 17.1. Overall, mounting and connection dimensions of Electric Motors 3152
9
20
242
9
15
28
15
28
24
Wat
erin
leta
ndou
tlet
6
44
590
138
R29
6
12po
rt2
4
600
600 -1
,1
660-0,8
600
0,5
5
2230'45673
0'
R319
Wat
erin
leta
ndou
tlet
Oil
feeding
Oil
feeding
35
55
550
446
R29
6
138
l30
l
590
35
55
Oil
Feeding
24+0,52
12 port
600
600
660
600
2230'45673
0'
Figure 17.2. Overall, mounting and connection dimensions of Electric Motors 315
Wat
erin
leta
ndou
tlet
Water inlet and outlet
l1
105
1
R319
29
20
24
29 15
28
15
28
24
0+1,18-0,61
54
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
ЭДКВ
400L
12/4
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
Table 18. - Specifications of Electric Motors 400L12/4
Electric MotorType
NominalWattage,
kW Output-InputRatio,% cos
max
Mnom
start
Mnom
Istart
Inom
Weight,kg
MountingVersion
400L12/4 120/360 85/93 0,57/0,85 -/3,3 2,6/2,0 3,63/6,80 2530M9701
At nominal load
686
16 port 24
680
657
.75 3,520 3-S4 PS 1709-74
1114
5 1384 port 35
280 5601270
Figure 18. Overall, mounting and connection dimensions of Electric Motors 400L12/4
34+2 -3
Electric Motors 400L12/4
Explosion-proof three-phase asynchronous Electric Motors with a short-circuited rotor of type400L12/4 are intended for an Electric Motor gear of chain-and-flight conveyors 27 used in theshafts dangerous under the contents of firedamp (methane) and finely pulverized coal.
Electric Motors have the following versions on explosion safety: 3 in accordance withGOST 12.2.020 (home market) and ExdiaI in accordance with GOST 12.2.020 (export).
Aspect of a climatic modification and a category of arranging of the Electric Motors produced forhome market and export deliveries to the countries with a temperate climate - 5, for export deliveries tothe countries with a damp and dry tropical climate - 5 in accordance with GOST 15150.
Nominal operating mode of Electric Motors - S1 is in accordance with GOST 183 and GOST 28173.Electric Motors are oriented for operation from a circuit of three-phase alternate current by voltage
1140V and frequency of 50 Hz.Protection index of Electric Motors from external effects - IP54 is in accordance with GOST 17494.Electric Motors have class insulation of thermal resistance in accordance with GOST 8865.Versions on a mounting mode - IM4001 and M9701 are in accordance with GOST 2479.Cooling method of Electric Motors - KW37 is in accordance with GOST 20459.
The weight of Electric Motors and specifications for a nominal operating mode at voltage 1140Vand frequency 50Hz also are given in Table 18. The overall, mounting and connection dimensions ofElectric Motors are given on Figure 18.
Electric Motors ЭДКВ400L12/4
Explosion-proof three-phase asynchronous Electric Motors with a short-circuited rotor of type ЭДКВ400L12/4 are intended for an Electric Motor gear of chain-and-flight conveyors КСД27 used in the shafts dangerous under the contents of firedamp (methane) and finely pulverized coal.
Electric Motors have the following versions on explosion safety: РВ3ВИа in accordance with GOST 12.2.020 (home market) and ExdiaI in accordance with GOST 12.2.020 (export).
Aspect of a climatic modification and a category of arranging of the Electric Motors produced for home market and export deliveries to the countries with a temperate climate - У5, for export deliveries to the countries with a damp and dry tropical climate - Т5 in accordance with GOST 15150.
Nominal operating mode of Electric Motors - S1 is in accordance with GOST 183 and GOST 28173.Electric Motors are oriented for operation from a circuit of three-phase alternate current by voltage
1140V and frequency of 50 Hz.Protection index of Electric Motors from external effects - IP54 is in accordance with GOST 17494.Electric Motors have class insulation of thermal resistance Н in accordance with GOST
8865.Versions on a mounting mode - IM4001 and M9701 are in accordance with GOST 2479.Cooling method of Electric Motors - ICW37 is in accordance with GOST 20459.The weight of Electric Motors and specifications for a nominal operating mode at voltage 1140V
and frequency 50Hz also are given in Table 18. The overall, mounting and connection dimensions of Electric Motors are given on Figure 18.
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
55
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
2ВРМ, ВРМ280S4, 2BP2M280S4
Electric MotorType
NominalWattage,
kW
SynchronousVelocity,
r/minSlidingmotion,
%
At nominal load
Output-Input
Ratio,%cos
max
Mnom
start
Mnom
Istart
Inom
InertiaMoment,kg m2
Weight,kg
22280S42280L4
280S4225022250S222252
2200L22200LA2
2160M22132M2
110160
110907555
4550
2515
15001500
1500300030003000
30003000
30003000
1,251,33
1,250,830,831,90
1,901,67
2,503,30
94,094,5
94,092,592,290,0
89,091,0
90,590,0
0,890,85
0,890,910,900,87
0,880,89
0,890,88
1,82,5
1,81,72,52,0
1,91,8
1,81,6
6,87,0
6,87,07,57,5
7,56,5
6,06,0
2,5002,0
2,5501,10,350,350
0,2900,290
0,1200,095
9501070
970735520450
410410
230132
2,83,0
2,82,73,03,0
3,02,8
2,52,8
Table 19.1. - Specifications of Electric Motors 2 , , 22
Electric Motors 2, 280S4, 22280S4
Explosion-proof three-phase asynchronous Electric Motors with a short-circuited rotor of types 2 ,280S4 and 22280S4 are intended for an Electric Motor gear of local airing fans used in theshafts dangerous under the contents of firedamp (methane) and finely pulverized coal.
Electric Motors have the following versions on explosion safety: 3 in accordance with GOST12.2.020 (home market), ExdI in accordance with GOST R 51330.0 (export to Russia and the CIScountries) and ExdI in accordance with GOST 12.2.020 (export to other countries).
Electric Motors are produced according to specifications of Technical Conditions 31.1-05758925-008:2006.Aspect of a climatic modification and a category of arranging of the Electric Motors produced for
home market and export deliveries to the countries with a temperate climate - 5, for export deliveries tothe countries with a damp and dry tropical climate - 5, for export deliveries to the countries with a frigidclimate - 5 in accordance with GOST 15150.
Nominal operating mode of Electric Motors - S1 is in accordance with GOST 183 and GOST 28173.Electric Motors are oriented for operation from a circuit of three-phase alternate current by frequency
of 50 Hz voltage 380, 660 and 1140V.Protection index of Electric Motors from external effects - IP54 is in accordance with GOST 17494.Electric Motors of the climatic have class insulation of thermal resistance in accordance with GOST
8865.Electric Motors have the following versions on a mounting mode- 280S4 - IM4001 in accordance with GOST 2479;- 2 - M4901 in accordance with GOSÒ 2479;- 22M280S4 - IM4002 in accordance with GOST 2479.The terminal box of Electric Motors fastens on a fan housing and supposes turning movement on an
edge, divisible by 90° in an installation plain.Cooling method of Electric Motors - ICA 0141 is in accordance with GOST 20459.The weight of Electric Motors and specifications for a nominal operating mode at frequency 50Hz and
voltage 660V are given in Table 19.1.The overall, mounting and connection dimensions of Electric Motors are given on Figures 19.1 - 19.4
and in Tables 19.2 - 19.4.
Electric Motors 2ВРМ, ВРМ280S4, 2ВР2М280S4
Explosion-proof three-phase asynchronous Electric Motors with a short-circuited rotor of types 2ВРМ, ВРМ280S4 and 2ВР2М280S4 are intended for an Electric Motor gear of local airing fans used in the shafts dangerous under the contents of firedamp (methane) and finely pulverized coal.
Electric Motors have the following versions on explosion safety: РВ3ВИа in accordance with GOST 12.2.020 (home market), РВExdI in accordance with GOST R 51330.0 (export to Russia and the CIS countries) and ExdI in accordance with GOST 12.2.020 (export to other countries).
Electric Motors are produced according to specif ications of Technical Conditions ТУ У 31.1-05758925-008:2006.
Aspect of a climatic modification and a category of arranging of the Electric Motors produced for home market and export deliveries to the countries with a temperate climate - У5, for export deliveries to the countries with a damp and dry tropical climate - Т5, for export deliveries to the countries with a frigid climate - ХЛ5 in accordance with GOST 15150.
Nominal operating mode of Electric Motors - S1 is in accordance with GOST 183 and GOST 28173.Electric Motors are oriented for operation from a circuit of three-phase alternate current by
frequency of 50 Hz voltage 380, 660 and 1140V.Protection index of Electric Motors from external effects - IP54 is in accordance with GOST 17494.Electric Motors of the climatic have class insulation of thermal resistance Н in accordance with
GOST 8865.Electric Motors have the following versions on a mounting mode-ВРМ280S4 - IM4001 in accordance with GOST 2479;-2ВРМ - M4901 in accordance with GOSÒ 2479;-2ВР2M280S4 - IM4002 in accordance with GOST 2479. The terminal box of Electric Motors fastens on a fan housing and supposes turning movement
on an edge, divisible by 90° in an installation plain.Cooling method of Electric Motors - ICA 0141 is in accordance with GOST 20459.The weight of Electric Motors and specifications for a nominal operating mode at frequency
50Hz and voltage 660V are given in Table 19.1.The overall, mounting and connection dimensions of Electric Motors are given on Figures
19.1 - 19.4 and in Tables 19.2 - 19.4.
56
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
2ВРМ
, ВРМ
280S
4, 2B
P2M2
80S4
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
d25
l 1
l 39l 35
l 20
b 1
h1
h5
d 1
260
h51
l 21
170
220
230
l' 1
76
220
Figu
re19
.1.O
vera
ll,m
ount
ing
and
conn
ectio
ndi
men
sion
sof
Elec
tric
Mot
ors
2
132M
2,2
16
0M2,
2
200L
2
8
4
d 45
b43
R
4po
rtd 22
1
5
4po
rt1
4
4po
rtd 43
Elec
tric
Mot
orTy
ped 1
d 20d 22
d 24d 25
d 43d 45
b 1b 43
h 1h 5
h 31R
h 51l 1
l' 1l 20
l 21l 30
l 35l 36
l 39
1
2
160
2
2
200L
A2
2
132
2
42+0
,018
+0,0
02
55+0
,030
+0,0
11
38+0
,018
-0,0
02
343
420
290
16
20
12
385
470
323
378-0
,1-0
,3
460-0
,135
-0,2
90
315-0
,19
-0,5
1
16-
30
242
12 1610
235-
10845 5941
740
875
640
324
406
254
215
254
180
110
110
80
82 8258
96 9793
17 2216
658
756
575
248±
2
372
2
218 ±
2
440
2
-16
0+2,0
-2,1
140+2
,7-2
,2
148±
2
60
75
45
52-
38-
Tabl
e19
.2.-
Ove
rall,
mou
ntin
gan
dco
nnec
tion
dim
ensi
ons
ofEl
ectri
cM
otor
s2
13
22,
2
160
2,2
20
0LA
2
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
57
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
2ВРМ, ВРМ280S4, 2BP2M280S4
l' 1l 36
l 30
d27
l 39 l 20
l 35
l 22
l 1
d24
d25
89
d26
Figu
re19
.2.O
vera
ll,m
ount
ing
and
conn
ectio
ndi
men
sion
sof
Ele
ctric
Mot
ors
2
200L
2,2
22
5M2,
2
250S
2,2
25
02
h31
d 20
1
l 21
h41
1
4po
rtd 43
b43
npo
rtd 22
8
4 d 45
b 1
h1
h5
d 1b 41
2portd41
b45
b 44
d 44
b 46
54po
rtd 42
275
Tab
le19
.3.-
Ove
rall,
mou
ntin
gan
dco
nnec
tion
dim
ensi
ons
ofEl
ectri
cM
otor
s2
20
0L2,
2
225M
2,2
25
0S2,
2
250
2
Elec
tric
Mot
orTy
ped 1
d 20d 22
d 24d 26
d 25d 27
d 41d 42
d 43d 44
d 45b 1
b 41b 43
b 45b 44
b 46h 1
h 5h 31
h 41n
1
1
2
225
2
2
200L
2
2
250S
2
2
250
2
55+0
,030
+0,01
1
80+0
,030
+0,01
1
415
420
512
12
20
470
570
458-0
,135
-0,29
0
460-0
,135
-0,29
0
460-0,
135
-0,29
0
560-0
,145
-0,32
056
2-0,14
5-0,
320
450
445
12-
5581
6
14 18
16
220
250
-30
16 22
36- 45
242
235
286
220
215
220
170
275
230
10 14
59 85
915
875
1065
4551
,5
415 1
,5
500 1
,5
84
l 1l' 1
110
-82
130
- -
l 20
1070
,5
970
,5
1290
,5
l 21 2122 20
l 22 2329 25
l 30 810
756
890
950
l 35
415
3
372
3
495
3
425
3
l 36
415
3
404
3
495
3
425
3
l 39
160+2
,0-2,
1
140+2
,7-2,
2
190+2
,3-2,
0
2230
'
75
45
90
45
52
45
38
16
20
58
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
2ВРМ
, ВРМ
280S
4, 2B
P2M2
80S4
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
550js6(0,022)
170
0,8
45 03
657
1 l 30
1290
60,
15 657
164
94
154
48
9
600
1,4
660
h12 (-
0,8)
391
h41
h
45
7'
h31
170
0,8
90
14'
22M
14x1
,5-6
g
360
2to
shaf
t
w
ithta
ken
offh
ole
cap
l 30
Figu
re19
.3.O
vera
ll,m
ount
ing
and
conn
ectio
ndi
men
sion
sof
Elec
tric
Mot
ors
28
0S4
and
22
28
0S4
14h1
1 (-0,
11)
22h9
(-0,
052)
85+0,030-0,309
80m
6(+0
,030
+0,0
11)
45
0,4
3po
rtM
20-7
H4
port
M24
-7H
2200,7
220
0,7
4po
rt3
0H14
(+0,
52)
Figu
re19
.3.2
Oth
erse
eFi
gure
19.3
.1
15
223
0'
8po
rtd 22
b43
Tab
le19
.4.-
Ove
rall,
mou
ntin
gan
dco
nnec
tion
dim
ensi
ons
ofE
lect
ricM
otor
s
28
0S4,
22
28
0S4
Elec
tric
Mot
orTy
pe.
d 22b 43
hh 31
h 41l 30
22
280S
4
28
0S4
19.3
.119
.3.2
20
-7
24
1433
01
350
155
464
411
6012
5054
063
011
8010
15
Figu
re19
.3.1
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
59
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
2ВРМ, ВРМ280S4, 2BP2M280S4
Figu
re19
.4.O
vera
ll,m
ount
ing
and
conn
ectio
ndi
men
sion
sof
Ele
ctric
Mot
ors
2
280L
4
310
0,5
R29
5+3
35
30'
34
850
2
89
23
128
0,5
503
29
1310
45
30'
45
30'
550
635
-1
570
12po
rt3
6
6po
rt
20-7
45
0.5
6po
rt
20-7
90m
6(+0
,035
+0,0
13)
14H11
95h12(-0.52)
480
500-1
615-0.28
872
460 -2
25h9
3051,65303
390
264
0,5
2640,5
310
4po
rt1
814
93 130
93
130
29
128
0,5
4po
rt
24-7
60
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
ВАСО
5П
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
Electric MotorType
NominalWattage,
kW
SynchronousVelocity,
r/minSlidingmotion,
%
At nominal load
Output-Input
Ratio,%cos
max
Mnom
start
Mnom
Istart
Inom
InertiaMoment,kg m2
Weight,kg
5-13-12 13 500,0 1,50 89,5 0,72 2,1 1,2 5,2 1,5 7535-22-14 22 428,6 0,85 90,1 0,73 2,8 1,36 5,5 8605-30-14 30 428,6 1,15 91,0 0,74 1,43 5,7 7,0 9655-37-14 37 1,23 91,0 0,75 2,5 5,6 8,5 1075428,6
2,71,3
5,7
Table 20.1 - Specifications of Electric Motors 5
Electric MotorType L, mm h1, mm h2, mm h3, mm
5-22-14970 2562 3783 174-15-30-14
5-37-14 114-11080 1962 4483
Table 20.2 - Overall, mounting and connection dimensions of Electric Motors 5
Electric Motors 5
Explosion-proof three-phase asynchronous Electric Motors with a short-circuited rotor of type5 are intended for a direct Electric Motor gear of an air cooling devices used in the chemical,gas and petroleum-refining industry productions.
Electric Motors 5 have version on explosion safety 1ExdIIBT4 (home market, export toRussia, the CIS countries and other countries).
Electric Motors are produced according to specifications of Technical Conditions 31.1-05758925-015:2010.Aspect of a climatic modification and a category of arranging of the Electric Motors produced for
home market and export deliveries to the countries with a temperate climate - 1, for export deliveries tothe countries with a damp and dry tropical climate - 1, for export deliveries to the countries with a frigidclimate - 1 in accordance with GOST 15150.
Nominal operating mode of Electric Motors - S1 is in accordance with GOST 183 and GOST 28173.Electric Motors are oriented for operation from a circuit of three-phase alternate current by voltage
380V frequency 50Hz.Protection index of Electric Motors from external effects - IP54 is in accordance with GOST 17494.Electric Motors have class insulation of thermal resistance F in accordance with GOST 8865.Version on a mounting mode - 9633 is in accordance with GOST 2479.Cooling method of Electric Motors - IC01 is in accordance with GOST 20459.The weight of Electric Motors and specifications for a nominal operating mode are given in Table
20.1.The overall, mounting and connection dimensions of Electric Motors are given on Figures 20.1 - 20.2
and in Table 20.2.
Electric Motors ВАСО5П
Explosion-proof three-phase asynchronous Electric Motors with a short-circuited rotor of type ВАСО5П are intended for a direct Electric Motor gear of an air cooling devices used in the chemi-cal, gas and petroleum-refining industry productions.
Electric Motors ВАСО5П have version on explosion safety 1ExdIIBT4 (home market, export to Russia, the CIS countries and other countries).
Electric Motors are produced according to specif ications of Technical Conditions ТУ У 31.1-05758925-015:2010.
Aspect of a climatic modification and a category of arranging of the Electric Motors produced for home market and export deliveries to the countries with a temperate climate - У1, for export deliveries to the countries with a damp and dry tropical climate - Т1, for export deliveries to the countries with a frigid climate - ХЛ1 in accordance with GOST 15150.
Nominal operating mode of Electric Motors - S1 is in accordance with GOST 183 and GOST 28173.Electric Motors are oriented for operation from a circuit of three-phase alternate current by voltage
380V frequency 50Hz.Protection index of Electric Motors from external effects - IP54 is in accordance with GOST 17494.Electric Motors have class insulation of thermal resistance F in accordance with GOST 8865.Version on a mounting mode - М9633 is in accordance with GOST 2479.Cooling method of Electric Motors - IC01 is in accordance with GOST 20459.The weight of Electric Motors and specifications for a nominal operating mode are given in
Table 20.1.The overall, mounting and connection dimensions of Electric Motors are given on Figures
20.1 - 20.2 and in Table 20.2.
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
61
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
ВАСО5П
M64490
L
130 17
0h 1
Figure 20.1. Overall, mounting and connection dimensions of Electric Motors 5-13-12
Figure 20.2. Overall, mounting and connection dimensions of Electric Motors5-22,30,37-14
h 2
140
560300
2,5
922
810
4 port 28+0,52
180
928
90
320
M644
170
230
350
610
670
450
230350670
8po
rt2
4
60
3854
95
85,5
83,5
22N9(-0,052)
85,5
83,5
22N9(-0,052)
22,5
min
46
55
110
110
50
R55
6513
065
h 3
62
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
ВАОК
р-31
5М8,
ВАОК
р-35
5М8
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
Electric MotorType
NominalWattage,
kW
SynchronousVelocity,
r/minOutput-Input
Ratio,%cos
InertiaMoment,kg m2
Inom.of rotor,
Slip-ring
Voltage, V
Inom.of stator,
Weight,
kg
-3158-3558
75110
750750
90,292,8
0,720,81
7,112,0
180170
260386
170225
12001690
At nominal load
Table 21.1. - Specifications of Electric Motors
Table 21.2. - Overall, mounting and connection dimensions of Electric Motors
Electric MotorType
l10L l11 l31 b10 b11 b32 h h10 h31
-3158
-3558
4571552
5601582
585
665
216
254
508
610
635
720
350
387
315
355
21+2-3
25+2-3
724
875
Electric Motors -3158, -3558
Asynchronous Electric Motors with slip rings of types -315 and -355 are intended foroperation on various plants of a national economy, the coal operations, ports. Electric Motors areinterchangeable on electrical characteristics and the overall, mounting and connection dimensions withelectric motors ARRK of German manufacture.
Electric Motors are produced according to of Technical Conditions 31.1-05758925-007:2006.Aspect of a climatic modification and a category of arranging of Electric Motors - 2,5 are in
accordance with GOST 15150.Nominal operating mode of Electric Motors - S3 is in accordance with GOST 183 and GOST 28173
with cyclic duration factor of 60%.Electric Motors are oriented for operation from a circuit of three-phase alternate current by voltage
380V and frequency of 50 Hz.Protection index of Electric Motors from external effects - IP54 is in accordance with GOST 17494, a
protection index of the fan from air input - IP20 is in accordance with GOST 17494.Class of thermal resistance of stator winding insulation - F, armature coils - is in accordance with
GOST 8865.Version on a mounting mode - IM1001 is in accordance with GOST 2479.The input device is located from above and ensures a sharp turn on 180° for connection of energy
cables on the right or on the left.Cooling method of Electric Motors - I0141 is in accordance with GOST 20459.The weight of Electric Motors and specifications for a nominal operating mode are given in Table 21.1.The overall, mounting and connection dimensions of Electric Motors are given on Figure 21 and in
Table 21.2.
Electric Motors ВАОКр-315М8, ВАОКр-355М8
Asynchronous Electric Motors with slip rings of types ВАОКр-315 and ВАОКр-355 are intended for operation on various plants of a national economy, the coal operations, ports. Electric Motors are interchangeable on electrical characteristics and the overall, mounting and connection dimen-sions with electric motors ARRK of German manufacture.
Elect r ic Motors ВАОКр are produced accord ing to of Technical Condit ions ТУ У 31.1-05758925-007:2006.
Aspect of a climatic modification and a category of arranging of Electric Motors - У2,5 are in accordance with GOST 15150.
Nominal operating mode of Electric Motors - S3 is in accordance with GOST 183 and GOST 28173 with cyclic duration factor of 60%.
Electric Motors are oriented for operation from a circuit of three-phase alternate current by voltage 380V and frequency of 50 Hz.
Protection index of Electric Motors from external effects - IP54 is in accordance with GOST 17494, a protection index of the fan from air input - IP20 is in accordance with GOST 17494.
Class of thermal resistance of stator winding insulation - F, armature coils - Н is in accordance with GOST 8865.
Version on a mounting mode - IM1001 is in accordance with GOST 2479.The input device is located from above and ensures a sharp turn on 180° for connection of
energy cables on the right or on the left.Cooling method of Electric Motors - IСА0141 is in accordance with GOST 20459.The weight of Electric Motors and specifications for a nominal operating mode are given in
Table 21.1.The overall, mounting and connection dimensions of Electric Motors are given on Figure 21
and in Table 21.2.
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
63
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
ВАОКр-315М8, ВАОКр-355М8
Figure 21. Overall, mounting and connection dimensions of Electric Motors-3158 and -3558
170 l31 l10
l11
97
L
4 port 28b10
b11
h 10h
h 31
b32 580
90
9525 14
64
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
VARI
ABLE
-FREQ
UENC
Y CO
NTRO
L
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
Specifications of Electric Motors of series 3В, 3ВР, 2В, 2ВР and ВАО2 at power supply from Schneider Electric
frequency shifters of series Altivar61 and Altivar71
At power supply of Electric Motors with self-ventilation from frequency shifters the correct choice of power and the load torque have a special value. At operation of such Electric Motor on rates below nominal, conditions of its refrigeration are aggravated and long operation with the nominal factor (power) can lead to excessive overheating and an Electric Motor exit out of opera-tion or to considerable reduction of a period of its maintenance.
On Figure 22.1 the area is presented is long an admissible effective power on heat, and on Figure 22.2 - is long admissible on heat of driving torque of electric motors at speed regulation by change of output frequency of the frequent converter.
The graphs presented on Figures 22.1 - 22.2 are spreaded to all Electric Motors of series 3В, 3ВР, 2В and 2ВР, and also on four - six- and eight - pole Electric Motors of series ВАО2 produced by Joint Stock Company «PEMP named after K. Marx».
Power on Figure 22.1 is presented in fractions from rated power РН, and driving torque on Figure 22.2 - in fractions from nominal factor МН. The Rated power, rated load torque and nomi-nal synchronous rate of Electric Motors of series 3В and 3ВР are given in Table 22.1, Electric Motors of series 2В and 2ВР - in Table 22.2, Electric Motors of series ВАО2 - in Table 22.3.
Magnitude of the short-term reloading moment does not depend on rate of rotation of the Electric Motor and is defined by magnitude of the maximum transitive current of a corresponding frequency shifter.
The data given on Figures 22.1 and 22.2 has been received as a result of trials with Schneider Electric frequency shifters of series Altivar and spreaded only to converters of this series.
The frequent asynchronous electric motor as a part of flameproof electric motors produced by Joint Stock Company «PEMP named after K. Marx» and Schneider Electric frequency shifters (FS) of series Altivar can be applied on productions with mains voltage 380V where there is a possibility of installation of an FS outside of an explosive zone.
Optimum application of electric motors with the self-ventilation, produced now by Joint Stock Company «PEMP named after K. Marx», is the electric motor for axial and centrifugal pumps, fans and air engines, i.e. gears with «fan» load. At these gears at reduction of rate the load moment decreases at least square, i.e. lowering of rate, for example, in 2 times in comparison with the nominal calls drag torque reduction by the Electric Motor shaft at least in 4 times. On Figure 22.3.1 in one co-ordinate plain are given:
- Area it is long admissible driving torque of the Electric Motor at change of its rate by means of the frequent converter;
- A range of the moment of a load «fan» gears at speed regulation of rotation of an actuating motor.
Apparently from Figure 22.3.1, on all frequencies lower 50Hz the admissible moment of the Electric Motor considerably exceeds gear drag torque, and the control speed range makes from 5 to 50Hz, i.e. from 10 to 100 % of rated speed (thus the Electric Motor rated power should exceed power of the gear on 5 %).
One more scope of application of the frequent electric motor - screw air engines and screw pumps. At these gears at reduction of rate the load moment also decreases, but not so is appreciable as at axial and centrifugal aggregates. Apparently from Figure 22.3.2, the control speed range will make approximately 15 - 50Hz or 30 - 100% of rated speed (thus the Electric Motor rated power should exceed power of the gear on 10%). In most cases, such range is sufficient for adjusting of capacity of screw air engines and pumps.
Except the aggregates specified above, the flameproof frequent electric motor is widely applied in piston air engines and pumps. These gears have fixed drag torque at any rate. Apparently from Figure 22.3.3, at a correct choice of engine power (power of the gear is less than Electric Motor rated power approximately on 15%) the control speed range of the piston gear will make 20 - 50Hz or 40 - 100% of rated speed.
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
65
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
VARIABLE-FREQUENCY CONTROL
Electric MotorType
Nominal Wattage,kW
SynchronousVelocity, r/min Rated load torque, Nm
3, 31122 7,5 3000 24,93, 3112M4 5,5 1500 36,53, 3112MA6 3,0 1000 30,33, 3112MB6 4,0 40,53, 3112MA8 2,2 750 29,53, 3112MB8 3,0 40,93, 3132M2 11,0 3000 36,23, 3132S4 7,5 1500 49,43, 3132M4 11,0 72,93, 3132S6 5,5 1000 54,73, 3132M6 7,5 74,63, 3132S8 4,0 750 53,83, 3132M8 5,5 74,03, 3160S2 15,0 3000 48,53, 3160M2 18,5 59,93, 3160S4 15,0 1500 97,43, 3160M4 18,5 120,43, 3160S6 11,0 1000 107,63, 3160M6 15,0 147,23, 3160S8 7,5 750 97,93, 3160M8 11,0 144,03, 3180S2 22,0 3000 71,63, 3180M2 30,0 97,63, 3180S4 22,0 1500 143,53, 3180M4 30,0 195,73, 3180M6 18,5 1000 180,63, 3180M8 15,0 7503, 3200M2 37,0 3000 119,93, 3200L2 45,0 146,03, 3200M4 37,0 1500 240,93, 3200L4 45,0 293,23, 3200M6 22,0 1000 214,23, 3200L6 30,0 292,03, 3200M8 18,5 750 241,43, 3200L8 22,0 286,73, 3225M2 55,0 3000 178,53, 3225M4 1500 358,03, 3225M6 37,0 1000 360,93, 3225M8 30,0 750
1000
750
1500
1000
750
3000
1500
1000
750
3000
1500
3000
1500
1000
750
196,5
391,8
55,0
Table 22.1. - Brief specifications of Electric Motors 3, 3
LuhanskSovetskaya street, 20-,tel.: (0642)59-95-95,fax: (0642)[email protected]
KievSkovorody street, 1tel.: (044)[email protected]
KharkovOstrovskogo street, 31-(2nd floor)tel.: (057)758-49-09fax: (057) 783-34-88kharkov @ yahont.com.ua
DonetskOvnatanyana street, 4,office 601tel.: (062)333-98-44
(062) 386-88-02don @ yahont.com.ua
SeverodonetskYegorova street, 11(2nd floor)tel.: (06452)[email protected]
Websitehttp://wvw.yahont.com.uahttp://7894.ukrindustrial.comCustomers service:[email protected]. phone: (050) 607-74-08
The complete information on acquisition and installation of frequency shifters of series Altivarcan be received at the official distributor of Schneider Electric Company of LLC "Jahont".
66
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
VARI
ABLE
-FREQ
UENC
Y CO
NTRO
L
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
Electric MotorType
Nominal Wattage,kW
SynchronousVelocity, r/min Rated load torque, Nm
2, 2250S2 75 3000 240,72, 2250M2 90 3000 288,9
2, 2280S22, 2250M82, 2250S82, 2250M62, 2250S62, 2250M42, 2250S4
110453755459075
30007507501000100015001500
354,4584,7480,7533,2436,3578,8482,3
2, 2280S4 110 707,42, 2280S6 75 727,22, 2280M6 90 1000 872,62, 2280S8 55 714,62, 2280M8 75 750 974,5
15001000
750
Table 22.2. - Brief specifications of Electric Motors 2B, 2BP
Electric MotorType
Nominal Wattage,kW
SynchronousVelocity, r/min Rated load torque, Nm
2-280S4 132 8512-280M4 160 1500 10322-280L4 200 12902-280M6 110 1000 10652-280L6 132 1000 12782-280M8 90 11662-280L8 110 750 14252-315M4 250 16092-315L4 315 1500 20282-315M6 160 15472-315L6 200 1000 19332-315M8 132 17032-315L8 160 750 20642-3556 250 1000 24122-355L6 315 30392-3558 200 750 25672-355L8 250 750
1500
1500
750
1500
1000
750
1000
3209
Table 22.3. - Brief specifications of two -, four - and six - poleElectric Motors 2-280, 2-315 2-355
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
67
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
VARIABLE-FREQUENCY CONTROL
Figure 22.1. Electric Motors' continuous brake horsepower of Series 3, 3, 2,2 and 2 at power supply from Schneider Electric frequency shifters of series Altivar
Figure 22.2.Electric Motors' continuous load torque of Series 3, 3, 2,2 and 2 at power supply from Schneider Electric frequency shifters of series Altivar
68
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
VARI
ABLE
-FREQ
UENC
Y CO
NTRO
L
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
22.3.Electric Motors' torque and load torque of mechanisms for frequency control of pumps, fans and compressors
Figure 22.3.1.Frequency control of electricdrive of centrifugal and axial flow mechanisms
Figure 22.3.2.Frequency control of electricdrive of screw mechanisms
Figure 22.3.3.Frequency control of electricdrive of reciprocating mechanisms
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
69
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
NOTESNOTES
70
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
NOTE
S
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
NOTES
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
71
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
NOTESNOTES
72
ALC «Pervomaysk Electromechanical Plant named after Karl Marx»ALC «Pervomaysk Electromechanical Plant named after Karl Marx»
The present catalogue has been designed for information only, so its contents cannot be the basis for claims.
Our company is constantly working on increasing of the range and improving of the quality of our products.
For more information about our company and its products please refer to our sales department. Tel.: (06455) 4-41-26, 4-44-96.
Address: Zavodskoy lane, 1, Pervomaysk city, Luhansk region, Ukraine, 93202Tel./Fax: +38 (06455) 4-46-04, 4-58-00Website: www.pemz.com.uaE-mail: [email protected], [email protected]