AKSAISPETSMONTAZH COMPANY PRESENTATIONVersatile, up-to-date,
high-technology block-modules
Content1. Block modules function 2. Climatic service conditions
of multi-functional mobile units and block - modules.3. Technical
specifications.4. Additional furnishing.5. Transportation.6.
Storage.7. Installation.8. Mobility and supervision9. Licensing
documentation.10. Photo gallery.11. Contact details.
Block modules functionMobile buildings (inventory), hereinafter
referred to as "Module" - a self-contained buildings (block -
modules), 100% of factory assembled with increased comfort and
amenities for persons residing outside of and in population
locality. Functionality the modules are divided into the following
types:offices;accommodations;kitchen and canteen;hotel
complex;camps;hypermarkets;banks;personnel facilities MVD, ES,
Minoboronysecurity checkpoints and block-modules;dispatching office
and command posts;premises utilities;first-aid posts, toilet rooms
and shower-baths;warehouses for materials and
tools;workshopsheating units.School and preschool facilities.
Climatic service conditions of multi-functional mobile units and
block - modules.climatic service conditions of multi-functional
mobile units and block - modules. :the direct effect of atmospheric
precipitation in the form of fog, rain, snow;ambient temperature
from -40 to +50 degrees ;relative air humidity till 60% at 20
degrees C; snow load 1,00 ;wind load 0,48 ;seismicity of the area
using up to 10 points
Technical specificationsFire Safety the block modules are
manufactured of the facing materials and lagging that ensure III a
class of fire resistant according to SNIP RoK 2.02-05;Block modules
framework made of light steel structural metalwork bent as C -
shaped profiles according to ST AO 04768086-02-2008 with two belts
reinforced by the upper and lower perimeter is made of hot channel
14 according to GOST 8240. The belt of the upper perimeter is
corrugated beam is increased by ridged beams if the width of the
span of the module is more than 12 mWalls:Inner lathing - made of
cold-formed III shaped profiles and outer coating- steel galvanized
corrugated sheet 0.7 mm thick (color of sheet is determined by the
Buyer) in accordance with ST AO 04768086-02-2008;heat-insulation -
100 mm lagging ISOVER;Inner coating types of finishing- plastic
panels, MDF panels, galvanized siding metal for industrial purpose
buildings;vapor sealing - PVC film.Roof:flat;Inner lathing made of
cold-formed III-shaped profiles and outer coating stainless steel
sheet 75378 thickness 0,7 mm according to 04768086-02-200, joints
are seamed to the castle like "seam";The water flow is organized to
the ends of the module; Heat-insulation - 100 mm, lagging
ISOVER;Inner coating types of covering- plastic panels, MDF panels,
galvanized siding metal for industrial purpose buildings;vapor
sealing - PVC film.
Technical specificationsFloorInner lathing - is made of
cold-formed -shaped profiles and substrate - stainless steel sheet
h4 galvanized , 0.7 mm thick according to
04768086-01-2008;Heat-insulation - 100 mm, lagging ISOVER;The top
layer - in a typical performance - 30 mm board, OSB 18 mm, cover -
linoleum. Options: - 4mm corrugated metal for industrial purpose
buildings;vapor sealing - file.Interior bulkhead :Vertical and
horizontal connections of cold-formed C-shaped profiles according
to ST AO 04768086-02-2008; Lathing made of cold III shaped profiles
according to ST AO 04768086-02-2008 on both sides;Heat-insulation
-- 100 mm, lagging ISOVER;Coating on two sides types of finishing-
plastic panels, MDF panels, galvanized siding metal for industrial
purpose buildings;Windows - windows profile of complex opening are
made of PVC profile with a 2-pane glass.Doors:external metal,
heat-insulated;Internal doors plastic PVC, color.
Technical specificationsElectrical system of block modules:Power
supply 220-380 , 50 hz with solid earthed neutral;Power supply is
made in accordance with the requirements of ESR-99. According to
power supply degree electro receiver belongs to the third
category;Input voltage 220V as per scheme "F + N + PE," where the
PE is protective earthing conductor;Wiring is made by closed method
in cable channels. Switches and power supply socket 10A built-in
type with vanishing conductor are installed according to the
Schemes;Lights to be fluorescent fixture of enclosed type; Outdoor
lighting is not provided;Electrical power of the building - from 5
kW, the upper limit of the power is not limited.All changes in
power supply of the building at the request of the buyer to be
agreed separately.Communications networks - computer, telephone and
television networks wiring to be conformed according to working
project.Water supply:Centralized on external sources of hot and
cold water;Independent - individual tanks for storage of water from
50 to 1000 liters, installed in the module. Water supply is
provided by individual automatic water supply stations in each
module. Water supply network to be wired using metal plastic
pipes.
Drainage - PVC piping sections 50 and 100 with a tap to the
sewer system. Heating system:central - from the layout of the
building heating system with the installation of radiators in each
room independent - electrical oil heaters Ventilation - natural
ventilation - window panes .
Additional furnishing. Possible additional furnishing : As
agreed upon with Customer it is possible to install additional
equipmentartificial ventilation exhaust fan ;built-in air
conditioner split system winter -summerkitchen equipment - cooking
appliance, washer, refrigerator, kitchen furniture;plumbing
equipment hot water boiler, sinks, toilets, urinals, showers,
washing machine;furniture and office equipment and premises,
depending on the purpose of the building;satellite TV
antenna.Modules can be used both separately and in combination with
several buildings, creating a complex;It is possible to create 2
floor complexes from Modules with their interconnection;It is
possible to redevelopment the modules according to customer request
installation of extra windows, manufacturing of interior walls,
installation of heating and drainage.
TransportationTransportation.transportation of block-module can
be realized by any type of transport in accordance with the rules
applicable to it;the building is not classified as a dangerous
according to GOST 19433combined portage of buildings only with
loads, related to the safe category per GOST 12.1.004module to be
transported without packing;interior and exterior doors shall be
closed, locked and sealed ;loading of module to truck is carried
out using mounting tabs only;transportation of buildings with
people inside is not allowed;to ensure the sustainability and
security of the buildings during transportation by road, speed of
the car shall be limited on asphalt road or other hard surface up
to 50 km / h on roads with gravel and cobble coating - up to 30 km
/ h, on dirt roads - up to 15 km / hWarning! When transporting a
mobile building by motor transport it is necessary to install
support-bars (plates) . (See Fig. 3)
StorageStorage.combined storage of buildings only with the
materials relating to category safe in accordance with GOST
12.1.004 storage of module to be carried out on storage conditions
7 and 8 GOST 15150, doors, windows and other openings have to be
closed and modules to be protected from outsider
penetration;modules should be put on the pads during storage;the
platform for storage of inventory buildings in the open air has to
be smooth, cleared and provide water drainage;the period of storage
shouldnt exceed 6 months from the date of delivery to storage. If
after the deadline the modules not to be put in operation, it is
necessary to perform scheduled maintenance and repair providing
their safety.
InstallationInstallation.installation of block module is carried
out using mounting tabs only;block module shall be installed on a
flat surface using the pads horizontally; modules may be installed
on each other no more than two storeys;Before connecting the unit
to the mains supply, it is necessary to provide reliable connection
of the module frame to the external groundingProhibition! To
prevent damage of block-module bottom casing it is strictly
forbidden to install a module unit on the ground without pads or
install support blocks not under a power belt of the module. (see
Fig..1)Warning! Module shall be installed horizontally. For
installation use the pads. The support units shall be installed in
accordance with the scheme issued by the manufacturer. Supporting
area of the blocks determined by the density of the soil. (see Fig.
2)Warning! modules may be installed on each other no more than two
storeys (See Fig. 4)Warning! Before connecting the module to the
mains supply, it is necessary to provide reliable accession of
module framework to an external contour of grounding through a bolt
on the bottom belt of a back facade (Fig.5)
Mobility and supervision.Mobility and design scheme of mobile
buildingsFrom separate mobile buildings (block-modules) it is
possible to build rotational villages and infrastructure of
settlements at minimum expenses on their installation, on the
prepared foundation and on assembling works on docking of mobile
buildings in blocks. The indicated works are carried out under the
supervision and with participation at chief-editing specialists of
AksaiSpetsMontazh LLP. If necessary, mobile buildings are able to
follow the dismantling and moving them to other industrial sites.
Supervision"AksaiSpetsMontazh" LLP provides on place of mobile
buildings exploitation the presence of experts for the period
agreed with the Purchaser for following works:management of
personnel, installing of mobile buildings on foundations and
assembly of functional units from mobile buildings. All necessary
materials handling equipment, transportation, equipment and
manpower for installation of mobile buildings are provided by
Customer;sealing of joints of roof, walls, floors and other works
related to the joining of the individual mobile buildings into
functional block -modules;Installation works on internal
engineering networks and equipping of mobile buildings and
functional units in the amounts established by the project
documentation (power supply, water supply, drainage, ventilation,
air conditioning); signing of act of delivery the mobile buildings
in operation.
Photo gallery offices
Photo gallery accommodations
Photo gallery canteen
Photo gallery hotel complexes
Photo gallery rotational camp
Photo gallery hypermarkets
Photo gallery banks
Photo gallery personnel facilities MVD, ES, Minoborony
Photo gallery security checkpoints and block-modules
Photo gallery dispatching office and command posts
Photo gallery premises utilities
Photo gallery first-aid posts, toilet rooms and shower-baths
Photo gallery warehouses for materials and tools
Photo gallery warehouses
Photo gallery Heating units
Photo gallery School and preschool facilities.
Contact detailsRepublic of Kazakhstan, West Kazakhstan oblast,t.
Aksai, industrial zone, Tel: 9-29-40 (gas line) Tel/fax: (71133)
36076E mail: [email protected] ,[email protected] Website:
www.asm.kz
