Airtherm - UPVC VCD

Embed Size (px)

Citation preview

  • 8/12/2019 Airtherm - UPVC VCD

    1/10

    Volume Control Dampers

    Series LF uPVC-VCDHigh performance plastic volume control dampers

    2.85 m3/hr/m2leakage at50 Pa, over 70% betterthan required by Part L ofBuilding Regulations

    Corrosion resistant,perfect for chlorinatedatmospheres or coastalareas

    Low U value of 1.2 W/m2K

    Lightweight

    Low torque design

    Full range of actuators

    LF uPVC-VCD: May 2014

  • 8/12/2019 Airtherm - UPVC VCD

    2/10

    www.airtherm.co.uk

    Series LF uPVC-VCDHigh performance plastic volume control dampers

    Series LF uPVC-VCD

    Design features

    Material Extruded rigid uPVC frame and blades

    Aluminium blade cores

    Stainless steel seals and fixings

    Sizes Minimum: 100mm x 105mm nominal

    Maximum single unit: 1500mm width, 1005mm height or 1005mm diameter.Above any of these, units would be made in sections or with mullions.

    Frame 40mm flange

    130mm overall depth

    Finish White uPVC

    Other colours on request. Minimum order quantities would apply.

    Operation Opposed blade, gear driven

    Mass/m2face area 17.5 kg

    Free area 75% maximum

    2

    The Series LF uPVC-VCD is an exceptionally low leakage volumecontrol damper, designed for highly energy efficient buildings.

    Proven in independent tests to have a leakage over 70% below thatcurrently required by Part L of Building Regulations.

    The plastic construction:

    Serves to make the whole damper a thermal break, as opposedto some rival products which attempt to modify an existing metalVCD design using thermal breaks.

    Is corrosion resistant. Perfect for coastal areas, chlorinatedatmospheres such as swimming baths, and anywhere dampersmay be exposed to elevated moisture levels.

    The drive is fully protected by being enclosed within the frame. Thisavoids it coming into contact with dust and debris which wouldadversely affect performance and warrant more frequent

    maintenance.

  • 8/12/2019 Airtherm - UPVC VCD

    3/10

    Series LF uPVC-VCDHigh performance plastic volume control dampers

    [email protected] 3

    Product testing

    Leakage testing

    Series LF uPVC-VCDs have been independently tested for

    air-tightness when fully closed.

    Part L of Building Regulations defines the maximum air permeability

    of a building as 10 m3/hr/m2when measured at 50 Pa.

    LF uPVC-VCDs have a leakage of 2.85 m3/hr/m2at 50 Pa,exceeding the Part L requirement by over 70%.

    The test damper was of nominal size 1000mm x 1005mm.

    Pressure (Pa) Leakage (m3/hr/m2)

    25 1.94

    50 2.85

    75 3.52

    100 4.06

    150 4.88

    Thermal conductivity - U value

    Series LF uPVC-VCDs have a calculated U value of 1.2 W/m2K,better than even high performance double glazing.

  • 8/12/2019 Airtherm - UPVC VCD

    4/10

    www.airtherm.co.uk

    Series LF uPVC-VCDHigh performance plastic volume control dampers

    If nominal size exceeds 1500mm wide, 1005mm high, or 1005mmdiameter, units will either be manufactured in sections, or havemullions to divide the blade pack.

    Spigots are manufactured from galvanised steel, polyester powdercoated white.

    Manufacturing tolerance: + or - 1mm

    Technical drawings

    Model A: Square flanged

    Model C:Circular spigotted

    Model B:Square spigotted

    Model D:Flat oval spigotted

    4

  • 8/12/2019 Airtherm - UPVC VCD

    5/10

    Series LF uPVC-VCDHigh performance plastic volume control dampers

    [email protected]

    Manual controls

    Extended spindle

    Allows fitting of an actuator by others.

    Stainless steel

    10mm diameter

    Extends 45mm from gear cover plate

    5

    Locking quadrant

    Cast aluminium locking quadrants can be fitted to enable manual

    operation of the VCD.

    Locking quadrants come with a cast-in position indicator and lockingnut.

  • 8/12/2019 Airtherm - UPVC VCD

    6/10

    www.airtherm.co.uk

    Series LF uPVC-VCDHigh performance plastic volume control dampers

    Belimo actuators

    We recommend the use of Belimo actuators for applications innon-specialist environments.

    All actuators are factory fitted and tested to confirm goodoperation. Other than connection to wiring, no alteration to theactuator is required on site.

    Please see the below table to find the series of Belimo actuatoryou require for your application.

    Suitable for LF uPVC-VCDs up to Voltage Action

    Series 0.4m2 1.0m2 2.0m2 24V 230V* Power open power close Spring return Modulating

    LM24A

    LM24A-SRLM230A

    LM230ASR

    NM24A

    NM24A-SR

    NM230A

    NM230ASR

    SM24A

    SM24A-SR

    SM230A

    SM230ASR

    LF24

    LF24-SR

    LF230

    NF24A

    NF24A-SR

    NF230A

    SF24A

    SF24A-SR

    SF230A

    *Suitable for 240V supply.

    6

  • 8/12/2019 Airtherm - UPVC VCD

    7/10

    Series LF uPVC-VCDHigh performance plastic volume control dampers

    [email protected]

    Protected actuator enclosures

    Schischek explosion-proof actuators

    Schischek produce a range of specialist explosion-proof actuatorsfor use in areas with potentially explosive atmospheres; E.G.petro-chemical plants, whisky distilleries and grain silos.

    ATEX approved.

    All actuators are factory fitted and tested to confirm goodoperation. Other than connection to wiring, no alteration to theactuator is required on site.

    Please contact us for more information on explosion-proofactuators with LF uPVC-VCDs.

    Unless specified, actuators are fitted outside the overall size of theVCD.

    It is possible to protect your dampers actuator by specifying anactuator enclosure.

    A modified frame is used, which includes a protected enclosure,and uPVC plates fitted either side to cover the space, one ofwhich is left removable. The space is large enough to allowremoval of the actuator in the event of failure.

    Please note: This will result in a loss of active damper width of140mm with Belimo LM, NM and SM actuators. Other motormodels may require larger enclosures.

    Kinetrol pneumatic actuators

    We can factory fit LF uPVC VCDs with Kinetrols compressed airdriven pneumatic actuators. A range of additional optionsincluding spring return modules can be fitted to enhancefunctionality.

    ATEX approved.

    All actuators are factory fitted and tested to confirm goodoperation. Other than connection to pneumatic lines, no alterationto the actuator is required on site.

    Please contact us for more information on pneumatic actuatorswith LF uPVC-VCDs.

    7

  • 8/12/2019 Airtherm - UPVC VCD

    8/10

    www.airtherm.co.uk

    Series LF uPVC-VCDHigh performance plastic volume control dampers

    Finish

    White uPVC

    Other colours available on request - Minimum order amounts will apply

    Ordering codes

    1 - 1000 x 1000 - LF uPVC-VCD - Model A - Belimo SM24A-SR - Protected

    Example

    Codes

    1) Quantity

    2) Size (mm) (Width x height) Nominal size

    3) Series LF uPVC-VCD High performance plastic volume control damper

    4) Model Model A Square flanged Model B Square spigotted

    Model C Circular spigotted Model D Flat oval spigotted

    5) Control EX Extended spindle LQ Locking quadrant (Actuator) State actuator code When ordering a spring return actuator, please specify whether you require spring

    open or spring close operation.

    6) Actuator protection Protected Actuator enclosure built into damper

    8

  • 8/12/2019 Airtherm - UPVC VCD

    9/10

    Series LF uPVC-VCDHigh performance plastic volume control dampers

    [email protected] 9

    Notes

  • 8/12/2019 Airtherm - UPVC VCD

    10/10

    Airtherm Engineering Ltd8A Gainsborough Trading EstateRufford RoadStourbridgeWest MidlandsDY9 7ND

    Tel: 0844 809 2509Fax: 01384 375218

    [email protected]

    www airtherm co uk