AIR TOOLS & EQUIPMENT (COMPRESSORS) · 2019-10-10 · AIR TOOLS & EQUIPMENT (COMPRESSORS) 301 COMPreSSOrS - POrtABle 7.5kW type 30 Compressor • T30 Cast-Iron pump • Star Delta

AIR TOOLS & EQUIPMENT (COMPRESSORS)

299

Angle Grinder • Pad Size - 4” • 10,000 RPM • 83 dBA• 90 PSI • Length - 138mm • Weight - 2kg

Part Number: SM065

ANGle GriNderS

100mm (4”) Angle GrinderCharacteristics • 229mm long • 12000rpm• 100mm capacity • 1.7kg • 566L/min max, 509L/min av air consumption

Product Code: SP-1254

125mm (5”) Angle Grinder

Characteristics • 229mm long • 12000rpm • 125mm capacity • 1.7kg • 566L/min max, 509L/min av air consumption


®

Nitto Angle Grinders• Powerful and robust• Compact dimensions allow easy access in confined spaces• Double lock safety lever• Wide variety of models available to suit most grinding applications

Model Number Wheel diameter Weight

MAG25B 58mm 0.55 kg

MAG40 Aust 100mm 1.4 kg

MAG50 125mm 2.2 kg

MlG70 180mm 3.4 kg

MlG70G70

• Compact dimensions allow easy access in confined spaces

Nitto Angle Grinders


• Wide variety of models available to suit most grinding applications


MlG70

Belt SANderS

Nitto Belt Sanders• Adjustable 360° rotation• Rear exhaust system • Tracking of belts is positive and easy to adjust• Double safety lock lever

Model Number Belt Size Weight

B10N 10 x 330mm 0.9 kg

B20N 20 x 520mm 1.4 kg

B30N 30 x 540mm 2.9 kg

B10N

Tracking of belts is positive and easy to adjustTracking of belts is positive and easy to adjustTracking of belts is positive and easy to adjust

B10N

125mm Angle Grinder with Wheel - Heavy duty• 11,000 RPM • Ideal for cleaning, deburring, grinding and high amounts of rust and material removal • Equipped with a side handle for better handling during operation

Part Number: CHPl1555

Ideal for cleaning, deburring, grinding and high amounts of rust and

BlOW GUNS

8mm Bent Pipe Blow Gun• Ideal for general use and keeping work areas

clean and tidy• Maximum working pressure 232PSI (16bar)

Part Number: 124140101

TM

8mm Bent Pipe Blow GunIdeal for general use and keeping work areas

Maximum working pressure 232PSI (16bar)

© Copyright Industrial Supply Group Pty Limited. ACN 055 790 282

AIR

TOOL

S &

EQU

IPM

ENT

(COM

PRES

SORS

)

300

Part Number Size124140112 300mm124140113 500mm124140114 1000mm124140183 1500mm124140184 2000mm

extra long Air Blow Guns• Cleans places which are difficult to access

TM

Part Number Angle Nozzle thread Size Working pressure301005 100mm 1/4” NPT 520-830 kPa (75-120 PSi)301679 100mm 1/4” NPT 520-830 kPa (75-120 PSi)301680 330mm 1/4” NPT 520-830 kPa (75-120 PSi)

Air Blow Guns• Modern styling, high impact plastic body, built-in hanger slot

hread Size Working pressure

Modern styling, high impact plastic body, built-in hanger slot

Blow Gun• 85mm nozzle, adjustable 360° • Pistol grip • 1/4” BSP Female • Interchangeable nozzle

Part Number: 07.0770

Blow Gun• Ideal for the safety conscious work shop. The safety

nozzle fitted to the end of the blow gun reduces the noise level to between 77-84db and protects skin penetration by reducing air flow when depressed.


Blow Gun• 450mm angle tip • Pistol grip • 1/4” BSP Female • Interchangeable nozzle


450mm angle tip Pistol grip

Blow GunBlow Gun

Nitto Chipping Hammer• High strength piston allows trouble-free operation• Straight design is suitable for narrow and deep applications• Chisel lock retains chisel securely• Straight, curved flat and flat chisels available

Model Number Chisel Shank Weight

CH24 12.7mm square 1.7 kg

CH24

CHiPPiNG HAMMer

25SCFM Air dryerCharacteristics• 700L/min max air flow

Product Code: ld05SHA









COMPreSSOrS - Air dryerS

Part Number Size124140112 300mm

xtra long Air Blow GunsCleans places which are difficult to access

TM

Ideal for the safety conscious work shop. The safety nozzle fitted to the end of the blow gun reduces the noise level to between 77-84db and protects skin penetration by

Part Number description SizeSG1072 Air Duster 130mm

SG1072l Air Duster, Longnose 305mmSG1072Xl Air Duster, Extra Longnose 500mm

Air dusters description Size

520-830 kPa (75-120 PS520-830 kPa (75-120 PS520-830 kPa (75-120 PS

escription

Air Duster, Extra Longnose

escription Size



301

COMPreSSOrS - POrtABle

7.5kW type 30 Compressor• T30 Cast-Iron pump• Star Delta starter• Slow revving and cool running• Inter-stage cooling• Reliable industrial motors• Large 230 litre storage capacity• Displacement: 40.5cfm• Free air delivery: 34.2cfm • Pressure set at 125psig• Speed: 1020rpm• Weight: 374kg

Part Number: 2545C10/8-Sd

electric 15amp Compressor• Displacement 14.3cfm (406l/min)• Free Air Delivery 9.9cfm (280l/min)• Pressure: 125psi• Tank: 50 litres• High efficient Cast Iron Pump• Slow revving and cool running• High quality combined filter/regulator• Weight: 73kg

Part Number: el17

ype 30 Compressor

Slow revving and cool running

Large 230 litre storage capacity

ype 30 Compressor

Displacement 14.3cfm (406l/min)Free Air Delivery 9.9cfm (280l/min)Displacement 14.3cfm (406l/min)Free Air Delivery 9.9cfm (280l/min)

electric Compressor• Displacement 11.1 (314l/min)• Free Air Delivery 7.7cfm (217l/min)• Pressure: 125psi• Tank: 50 litres• Performance based on ACACA protocol• High efficient Cast Iron Pump• Slow revving & cool running• High quality combined filter/regulator• Weight: 71kg

Part Number: el12

Petrol driven Compressor• Displacement 14.8cfm (419l/min)• Free Air Delivery 10.5cfm (296l/min)• Pressure: 125psi• Tank: 50 litres• Performance based on ACACA protocol• Honda GX160 Motor• High efficient Cast Iron Pump• Slow revving and cool running• High quality combined filter/regulator• Weight: 75kg

Part Number: el18P

riven CompressorDisplacement 14.8cfm (419l/min)Free Air Delivery 10.5cfm (296l/min)

Performance based on ACACA protocol

High efficient Cast Iron PumpSlow revving and cool running

riven Compressor


- POrtABrtABrt le

lectric Compressor

Free Air Delivery 7.7cfm (217l/min)


- POrtABrtABrt le

Free Air Delivery 7.7cfm (217l/min)


COMPreSSOrS - dieSel

trailer diesel Compressor• Locally manufactured trailers fully comply with Australia standards• Shibaura Diesel Engine: 4 Cylinder, water cooled, pre-chamber type• Dimensions (mm): 2680(l) x 1450(w) x 1395(h) and dry 790kg• Airend warranty: 7 years (10,000hrs)• Approved Vessel Pressure Certificate• Capacity: 100cfm• Working Pressure: 100psi• Whisper quiet operation: 64dbA

Part Number: PdS100S-6B1-t

Portable diesel Compressor• Popular among Mining Contractors and Maintenance Teams • Compact design mounts easily on vehicles• Capacity: 75cfm• Working pressure: 100psi• Shibaura Diesel Engine: 4 Cylinder, water cooled, direct injection• Whisper quite operation: 64dbA• Dimensions (mm): 1580(l) x 750(w) x 865(h) and dry 425kg

Part Number: PdS75S-5C1


AIR

TOOL

S &

EQU

IPM

ENT

(COM

PRES

SORS

)

302

Compact Stallion 300 Compressor• Free Air Delivery at 100PSI: 175LPM• 2.5HP Single phase -10 amp motor• 50 litre air receiver tank• Warranty: 1 year total unit

Part Number: 00083

Si 14 electric Belt drive Compressor• Free Air Delivery at 100PSI: 240LPM• 2.75HP Single phase motor• 55 litre air receiver tank• Warranty: 5 year pump, 1 year motor

Part Number: Si14

Si 19 Petrol Compressor• Free Air Delivery at 100PSI: 370LPM• 6.5HP Honda Motor• 68 litre air receiver tank• Pump RPM: 980• Warranty: 5 year pump,• 3 year Honda

Part Number: Si19P

Compact 5000 electric Belt drive Compressor• Free Air Delivery at 100PSI: 235LPM• 2.5HP Single phase motor• 40 litre air receiver tank• Pump RPM: 1160• Warranty: 3 year pump,1 year motor

Part Number: 00334

Si 17 electric Belt drive Compressor • Free Air Delivery at 100PSI: 300LPM• 3.2HP Single phase motor• 55 litre air receiver tank• Pump RPM: 930• Warranty: 5 year pump, 1 year motor

Part Number: Si17W

Free Air Delivery at 100PSI: 175LPM

rive CompressorFree Air Delivery at 100PSI: 240LPM

rive CompressorFree Air Delivery at 100PSI: 240LPM


rive


rive


lectricrive Compressor


Warranty: 3 year pump,1 year motor

lectricrive Compressor


Warranty: 3 year pump,1 year motor

Nailer Compressor• 3.8 Litre 1/2 hp Induction motor• 10 amp plug, only 83 dB.• High pressure -125 psi (8.6 bar)• Only 10kg• Ideal for brad and fixing nailers

Product Code HP tank Max Pressure

CHWX1001 0.5 3.8lt 8.6 Bar

Nailer Compressor• This range of super light weight, high pressure compressors have been designed specifically for use with nail guns. • Feature easy to read gauges, indexing regulator, aluminium tanks and are very quiet • 8017 will run 1 framer continuously, 8019 will run 2 framers continuously • Ideal for builders and carpenters

Product Code HP tank Max Pressure

CHWX801700di 1.1 9.5lt 9.3 Bar

CHX8019 1.8 15lt 10.3 Bar

Feature easy to read gauges, indexing

tanktankt Max Pressuretanktankt Max Pressure

Belt drive Compressor• Integrated control panel to guarantee easy reading - more ergonomic control and hose reel with 5mtr hose. • Oversized wheels for better stability and transportation• Twin front supports • High pressure - up to 10 bar• Manufactured to Australian standards • Cast iron cylinders for longer life

Belt drive Compressor• Integrated control panel to guarantee easy reading - more ergonomic control and hose reel with 5mtr hose. • Oversized wheels for better stability and transportation• Double swivel wheels• High pressure - up to 10 bar• Cast iron cylinders for longer life• Manufactured to Australian standards

Product Code HP tank FAd

NrB2800/50/2.5 2.5 50lt 175

NrB3800/50/3 3 50lt 270

• High pressure - up to 10 bar

easy reading - more ergonomic control easy reading - more ergonomic control

• High pressure - up to 10 bar

Manufactured to Australian standards

Integrated control panel to guarantee

control and hose reel with 5mtr hose. Oversized wheels for better stability


Integrated control panel to guarantee

control and hose reel with 5mtr hose.



NrB2800/100/2.5 2.5 100lt 175

NrB3800/100/3 3 100lt 270



303

V twin Belt drive Compressor• Max Pressure - 8 bar • Regulator with twin outlet • Cast iron cylinders for longer life • Manufactured to Australian standards


rAV2051/100/2.5 2.5 100lt 162

rAV2065/100/3 3 100lt 220

Manufactured to Australian standardsManufactured to Australian standards

3hp twin Cast iron Belt drive Portable Air CompressorCharacteristics• Belt drive • 251L/min FAD• 150psi • 100lt tank• 240Volts/10amp• Filter regular

Product Code: XrV1700

3hp Cast iron V-twin Characteristics• 150psi • Filter/regular • 50lt tank• Fad 251L/min

Product Code: XrV17

2.5hp Cast iron V-twinCharacteristics• 150psi • Filter/regular • 50lt tank • Fad 200L/min

Product Code: XrV14

3hp Alloy Belt drive Portable CompressorCharacteristics• 150psi• 50lt tank • Filter/regular • Fad 251L/min

Product Code: XrS1750

2.2hp Alloy Belt drive Portable Compressor Characteristics• 150psi • 50lt tank• Filter/regular • Fad 169L/min

Product Code: XrS1350

ron rive Portable

rive Portable Compressor

direct drive Compressor• Regulator with twin outlet • Cast iron cylinders for longer life • Manufactured to Australian standards

V-twin direct drive Compressor• High efficiency pumps constructed of aluminium for optimum heat dissipation with a cast iron cylinder barrel for longer life. • Fitted to Australian Standard wheel mounted air receivers, motors are overload protected.• Units are manufactured to the highest standard, individually tested and have a full 12 month warranty


rAC2/24 2 24ltr 115

rAC2.5/36 2.5 36ltr 134


rAV2.75/36 2.75 36ltr 205

rAV2.75/50 2.75 50ltr 205

V twin Belt drive Compressor• Max Pressure - 8 bar • Regulator with twin outlet • Cast iron cylinders for longer life • Manufactured to Australian standards


rAV2051/50/2.5 2.5 50lt 162

rAV2065/50/3 3 50lt 220

Cast iron cylinders for longer lifeManufactured to Australian standards

tanktankt FAd

High efficiency pumps constructed of aluminium for optimum heat dissipation with a cast iron cylinder barrel for longer life.High efficiency pumps constructed of aluminium for

50lt 220

High efficiency pumps constructed of aluminium for

Si 15 High Pressure Fatboy Compressor • Free Air Delivery at 150PSI: 300LPM• 3HP Single phase motor• 55 litre air receiver tank• Pump RPM: 1132• Warranty: 5 year pump,• 1 year motor

Part Number: Si5HPFB

15 High Pressure Fatboy Compressor



AIR

TOOL

S &

EQU

IPM

ENT

(COM

PRES

SORS

)

304

COMPreSSOrS - SCreW tyPe

Product Code description

BSC10270l 10hp Fini Screw Compressor



PlUS30 30hp Fini Screw Compressor

MCi40 40hp Fini Screw Compressor

MCi50 50hp Fini Screw Compressor

COMPreSSOrS - StAtiONAry

5.5hp 200lt tankCharacteristics• Belt drive v-twin • Disp 627L/min• 152psi • FAD 482L/min• 10amp/415volt

Product Code: XrS25

7.5hp 270lt tankCharacteristics• Belt drive triple • Disp1076L/min• 152psi • FAD 704L/min• 15amp/415volt

Product Code: XrS35

Si 25 three Phase industrial Compressor• Free Air Delivery at 100PSI: 545LPM• 5.5HP Motor• 110 litre air receiver tank• Pump RPM: 1154• Warranty: 3 year pump, 1 year motor

Part Number: Si25

ndustrial CompressorFree Air Delivery at 100PSI: 545LPM

ndustrial CompressorFree Air Delivery at 100PSI: 545LPM

6.5hp Portable Air CompressorCharacteristics• 6.5hp Austech engine• Belt drive• 150psi • 60lt tank • OHV/4 stroke• Twin cylinders• 376L/min FAD• Filter/regulator

Product Code: XrV1760P

3hp triple Cast iron Portable Air CompressorCharacteristics• 150psi • Filter/regulator • 60lt tank • 15amp/240volt • FAD 282L/min

Product Code: XrS18

escriptiondescription

10hp 270lt tankCharacteristics• Belt drive triple • Disp 1464L/min • 152psi • FAD 1085L/min • 18amp/415v

Product Code: XrS50

Si 52 three Phase industrial Compressor• Free Air Delivery at 150PSI: 990LPM• 10HP motor• 190 litre air receiver tank• Pump RPM: 1020• Warranty: 1 year total unit

Part Number: Si52

Si 35 Petrol Compressor• Free Air Delivery at 150PSI: 720LPM• 13HP Honda Motor• 150 litre air receiver tank• Pump RPM: 790• Warranty: 1 year pump, 3 year Honda

Part Number: Si35P

Warranty: 3 year pump, 1 year motor

ndustrial Compressor150PSI: 990LPM

CUt OFF tOOlS

Cut Off tool - Heavy duty• At 23,000 RPMs, provides the speed and power to cut steel quickly • Built-in power regulator to control speed in detail cutting • Equipped with guards and safety catches to prevent injury • Soft Stantoprene Elastomer grip for increase comfort


utyAt 23,000 RPMs, provides the speed and power to cut steel quickly

CUtterS - BOlt PNeUMAtiC

Pneumatic Cutter Centre• Centre cut jaws • Heavy-duty workhead has 5” bore (127mm) and 3” stroke (76mm) • Cutting controlled by manual pressure

Material Number: 9290C



305

die GriNderS

Angle die Grinder - Heavy duty• 25,000 RPM • Great for high speed grinding, porting, general purpose polishing and deburring • Twice the power of a standard die grinder, prevents stalling during heavy jobs


Great for high speed grinding, porting, general purpose polishing and deburring

1/4” Straight die Grinder

Characteristics • 145mm long • 23000rpm • 6.35mm capacity • 0.54kg • 603L/min max, 422L/min av air consumption


®

1/4” Air die Grinder• With safety lever • Polymer body• Free speed : 27,000 rpm • Optional collets available

Part Number: e2002

Polymer body

1/4’’ die Grinder • Collet Size - 6mm • 22,000 RPM • 93 dBA • Length - 169mm • Weight - 0.5kg

Part Number: SM512

Nitto die Grinders• L25 designed for use with grinding stones• L-35 specifically designed for use with rotary burrs• Both equipped with a super efficient silenced rear exhaust system• Both featuring in-built speed regulator

Model Number Collet Size Speed Weightl25 1/4 1/4” 27,000 rpm 0.6 kg

l25 6mm 6mm 27,000 rpm 0.6 kgl35 1/4 1/4” 37,500 rpm 0.45 kg

l35 6mm 6mm 37,500 rpm 0.45 kg

l25 1/4”

ie Grinder

23000rpm

1/4” Angle die Grinder• 1/4” Collet • 20, 000 rpm• Powerful 1/3 hp motor • Ave Air Cons: 3 cfm• Ball bearing constructions • Length: 143mm• Weight: 0.53kg

Part Number: 3102

1/4” Straight die Grinder• 1/4” Collet • 25, 000 rpm• Powerful 1/3 hp motor • Ball Bearing Constructions• Length: 171 mm • Weight: 0.58 kg• Ave Air Cons: 3 cfm

Part Number: 3108

• 25, 000 rpm• Ball Bearing Constructions

ie Grinderie Grinder25, 000 rpmBall Bearing Constructions

20, 000 rpmAve Air Cons: 3 cfmAve Air Cons: 3 cfm20, 000 rpmAve Air Cons: 3 cfm

diSC GriNder

diSC GriNder kit

5” Governed disc Grinder• Polymer outer casing• Safety lever• Disc size: 5”• Spindle size: M14 x 2• Free speed : 12,000 rpm

Part Number: e2515lA

isc Grinder

die Grinder kitKit comes with:• 1 x 301 Right Angle Die Grinder• 1 x 2” and 1 x 3” Backing Pad Roloc Style• 4 x 2”and 4 x 3” Surface Prep Discs• 1 x Case

Part Number: 301-32Mk

5” disc Grinder• 5” Disc Grinder• 12, 000 rpm• Length: 229mm• Ave Air Cons: 6 cfm 170 lpm• Powerful 1.0 hp motor• Weight: 1.85kg• 3/8” - 24 Arbor

Part Number: lA422-eU

diGGer

General Purpose digger 10.4kg• Suitable for horizontal or vertical use• Weight: 10.4kg • Blows/min: 2,350• Air Inlet: 3/8” • Muffler included• Chisel Type: 7/8” x 3 1/4” Hex• Latch type chisel release• Air Consumption: 45cfm

Part Number: 93lA1M-eU

Angle die Grinder • 18,000 RPM • Great for high speed grinding, porting, gasket removing, general polishing and deburring in confined areas • Standard 1/8” and 1/4” collets for all types of accessories


Great for high speed grinding, porting, gasket removing, and deburring in confined areas

Standard 1/8” and 1/4” collets for all types of accessories


AIR

TOOL

S &

EQU

IPM

ENT

(COM

PRES

SORS

)

306

1/2” industrial Air drill reversibleCharacteristics • 220mm long • 500rpm • 12.7mm capacity • 1.58kg• 546L/min max, 382L/min av air consumption • Forward/reverse


3/8” industrial Air drill reversibleCharacteristics • 195mm long • 2200rpm • 9.5mm capacity • 1.2kg • 546L/min max, 382L/min av air consumption • Forward/reverse


drillS

®

eversible

eversible

546L/min max, 382L/min av air consumption

10mm Air drill - keyless Chuck• Keyless Jacobs© chuck for fast and easy bit changes • Reversible to assist when binding occurs and for replacing screws.


10mm Angle Air drill - Medium duty• Used to drill hone, ream, holesaw and wirebrush most metal or wood materials • Durable Jacobs© chuck for reliable bit • Replacement angle head for ease of use


10mm reversible Air drill - Heavy duty• Jacobs© chuck for reliable bit replacement • Reversible to assist when binding occurs


13mm reversible Air drill - Heavy duty• 13mm Jacobs© chuck for reliable bit replacement • Reversible to assist when binding occurs and for replacing screws


chuck for fast and easy bit changesReversible to assist when binding occurs and for

rill - Medium dutyUsed to drill hone, ream, holesaw and wirebrush most metal or wood materials

rill - Medium rill - Medium dutyUsed to drill hone, ream, holesaw and wirebrush most metal or wood materials

rill - Heavy rill - Heavy duty

Air drills• New generation reversible industrial drills• Low vibration with comfort grip• Inbuilt speed regulator• Low noise• ADR-65 , ADR-100 Reversible• KDR-1301 Non-Reversible

Model Number Speed Max. dilling Capacity WeightAdr-65 2,900 rpm 6.5mm 0.8 kg

Adr-100 2,000 rpm 10mm 1.1 kgkdr-1301 700 rpm 13mm 2.5 kg

New generation reversible industrial drillsNew generation reversible industrial drillsAdr65

3/8” 90° rev. drill• 1,500 RPM • Spindle thread - 3/8” - 24 • 90 dBA • Length - 175mm • Weight - 1.8kg

Part Number: SM709r

3/8’’ reversible drill• 1,800 RPM • Spindle thread - 3/8” - 24 • 85 dBA • Length - 163mm • Weight - 1.4kg

Part Number: SM705

1/2’’ reversible drill• 800 RPM • Spindle thread - 3/8” - 24 • 89 dBA • Length - 175mm • Weight - 1.8kg

Part Number: SM704

• Spindle thread - 3/8” - 24 • Length - 163mm • Spindle thread - 3/8” - 24 • Length - 163mm

reversible drill keyless Chuck• 1/2” (13 mm) keyless chuck• 400 rpm• 0.5 hp motor• Length: 221mm, Weight: 1.5kg• Ave Air Con: 4 cfm 113 lpm

Part Number: 7803rAkC

eyless Chuckeyless Chuck



307

trak-it® C4ex Gas Fastening System Whether the application is Wood to Steel or Concrete with a powerful 153 Joules behind it the Powers Trak-It® C4EX can fire nails up to 65mm long making it the perfect tool for fixing timber bottom plates up to 45mm thick to concrete slabs.Trak-It® C4EX is ideal for any application that demands tool portability.

Builders and Carpenters: 45 and 35mm timber bottom plate to concrete FASTBuilders, Carpenters, Joiners, Framers, etc: timber to steel FASTMetal studs to concrete FASTForm Workers: plywood to concrete, block or steel FAST

• Fires nails up to 65mm with new proprietary coating for increased penetration• 18% more power• No airline or compressors required• Suitable for concrete up to 35 MPa• Portable, reliable and versatile• 2 batteries included

Product Code: 55112

GAS ACtUAted PrOdUCtS

Fasteners - Forced entry Powder and GasFasteners - Forced Entry Powder and Gas actuated drive pin systems for Concrete, Masonry and Steel. 27 calibre powder explosive tools. Gas fuel cell functioning tools for most trades with consumable concrete pins and trade specific fastening solutions.

HAMMerS

Air Hammer• Chisel shank: 0.401” dia• Blows/min: 2,600• Stroke length: 10mm• Includes 4 chisels

Part Number: e4120

Air Hammer • 2-5/8” (67mm) stroke provides the power for panel cutting and other needs. • Cuts, chips and scrapes most materials and is used for medium duty automotive exhaust removal, front-end and masonry.


2-5/8” (67mm) stroke provides the power for panel cutting

Cuts, chips and scrapes most materials and is used for medium automotive exhaust removal, front-end and masonry.

2-5/8” (67mm) stroke provides the power for panel cutting

Cuts, chips and scrapes most materials and is used for medium automotive exhaust removal, front-end and masonry.

NAil GUNS

32-64mm, industrial, 15º Angled Coil NailerAccepts both plastic and wire collated 15º angle coil nails. Lightweight magnesium assembly. Tool-free depth of drive adjustment. 500 inch/Ibs driving power

Part Number: N66C-1

2-65mm, 15GA Angled Finishing Nailer kit 15GA oil-free finishing nailer. Tool-free removable magazine. Adjustable depth control. Tool weighs just 1.72kg. Driving power: 400 inch/Ibs. Kit includes: Finishing nailer, 1,000-50mm nails, carry case, hex wrenches and 4 profile tips

Part Number: N62FNk-2

power: 400 inch/Ibs. Kit includes: Finishing

38-75mm, industrial, 15º Angled Coil Nailer Accepts both plastic and wire collated 15º angle coil nails. Lightweight magnesium assembly. Tool-free depth of drive adjustment 630 inch/Ibs driving power

Part Number: N75C-1


AIR

TOOL

S &

EQU

IPM

ENT

(COM

PRES

SORS

)

308

18 Gauge Brad NailerOil-free operation requires no regular maintenance. Low nail lockout prevents dry firing. Reversible belt hook. Selectable trigger system converts from sequential to contact operation. Kit Includes: Brad Nailer, 1/4” Swivel Air Fitting, 1000 2” Brads, Carrying Case, Hex Wrench and Belt Hook

Part Number: Bt1855k

Mini impact NailerRubber grip designed to insulate and reduce vibration. Weighs only 0.45kg. 360º swivel air fitting for maximum accessibility. Front exhaust directs air away from users palm

Part Number: PN50

NAilS AVAilABle FOr VAriOUS NAilerS

50-90mm, 33˚ Angled Framing NailerAccepts both paper and wire collated 33º framing nails. 1,050 inch/Ibs driving power. Industry’s most powerful framer! Fastener length 50mm-90mm. Lightweight magnesium body – weighs just 3.6kg. Patented push-button depth of drive adjustment. Adjustable rafter hook

Part Number: F33Pt

power. Industry’s most powerful framer! Fastener length 50mm-90mm. 33º framing nails. 1,050 inch/Ibs driving power. Industry’s most powerful framer! Fastener length 50mm-90mm. 33º framing nails. 1,050 inch/Ibs driving power. Industry’s most powerful framer! Fastener length 50mm-90mm.

N400C-1 - 57-100mm, High Power, industrial Nailer1,450 inch/Ibs driving power. Fastener length: 57-100mm (15º angle wire collated coil nails). Fastener diameter: 2.50-3.80mmAluminium housing. Steel wear guards.Fixed front exhaust. Secondary handle and Protective shroud

Part Number: N400C-1

50-90mm, 28˚ Angled Framing NailerAccepts both paper and wire collated 28º framing nails. 1,050 inch/Ibs driving power. Industry’s most powerful framer!Fastener length 50-90mm. Lightweight magnesium body – weighs just 3.5kg.Patented push-button depth of drive adjustment. Adjustable rafter hook

Part Number: F28WW

28º framing nails. 1,050 inch/Ibs driving power. Industry’s most powerful framer!

ross Brad Nail Gun 15-50mm• Lightweight alloy body with comfort grip• High quality nail magazine• Quick release system for jammed nails• Non marring, adjustable tip to protect work-piece• Switch between single and rapid bump fire

Part Number: rAN50

ross Angled Finishing Nailer 32-64mm• Lightweight alloy body with comfort grip• Strong and lightweight magazine holds 100 nails• Quick release system for jammed nails• Adjustable depth control allows you to drive nails in to the hardest of timbers

Part Number: rANdA64

ross Framing Nailer 50-90mm• A well balanced nail gun with 34 degree angled magazine allows you to access all areas for fast completion of framing and other construction jobs.• High quality extruded aluminium magazine with smooth open/close mechanism for quick reloading of clipped head nails• Adjustable depth control allows you to drive nails in to the hardest of timbers• Switch between single and rapid bump

Part Number: rAN9034

ross Coil Nailer 25-65mm• Lightweight alloy body with comfort grip for comfort and control gives a superb power to weight ratio• Coil style magazine holds up to 300 collated nails• Quick release system for jammed nails• Adjustable depth control allows you to drive nails in to the hardest of timbers• Switch between single and rapid bump fire

Part Number: rANCN65

ross Stapler/Brad Nailer 15-50mm Nails 16-40mm Staples• Lightweight alloy body with comfort grip• High quality nail magazine• Quick release system for jammed nails• Non marring, adjustable tip to protect work-piece• Switch between single and rapid bump fire

Part Number: rAN5040

Non marring, adjustable tip to protect work-pieceNon marring, adjustable tip to protect work-piece

Strong and lightweight magazine holds 100 nails

Adjustable depth control allows you to drive nails in to the hardest of timbers

A well balanced nail gun with 34 degree angledmagazine allows you to access all areas for fast completion of framing and other construction jobs.High quality extruded aluminium magazine with smoothopen/close mechanism for quick reloading of clipped head nailsAdjustable depth control allows you to drive nails in to the hardest of timbers

A well balanced nail gun with 34 degree angledmagazine allows you to access all areas for fast completion of framing and other construction jobs.High quality extruded aluminium magazine with smoothopen/close mechanism for quick reloading of clipped head nails

Lightweight alloy body with comfort grip for comfort and control gives a superb power to

Coil style magazine holds up to 300 collated nails

Lightweight alloy body with comfort grip for comfort and control gives a superb power to

Coil style magazine holds up to 300 collated nails

Non marring, adjustable tip to protect work-piece

oss Stapler/Brad Nailer 15-50mm


oss Stapler/Brad Nailer 15-50mm




309

Needle SCAler

Nitto Needle Scalers• Nitto Jet Chisels are the only unit of its kind without internal springs• Powered by a piston which produces no irregular power• Adjusts automatically to any surface contour

Model Number Standard Needle Size Body type

Jt20 3mm (2mm optional) Straight, Popular

JeX20 3mm (2mm optional) Straight, Anti-Vibration

JeX24 3mm (2mm optional) Pistol, Universal

JeX28 3mm, 4mm (2mm optional) Pistol, Heavy Duty

JeX28

NiBBler

Air Nibbler - Medium duty• 3,800 strokes per minute, provides the cutting powder to cut up to 1.5mm steel • Cuts intricate patterns in sheet metal and aluminium without leaving burrs.


uty3,800 strokes per minute, provides the cutting powder to cut up to

reCiPrOCAtiNG SAWS

reciprocating Saw - Medium duty • 10,000 strokes/minute provides the cutting power to cut up to 1.5mm steel • Cuts plastic, aluminium, fibreglass and sheet metal


eciprocating Saw - Medium duty

Filter regulator• Polycarbonate bowl with Metal bowl guard• 1/4” BSP Inlet/Outlet• Maximum working pressure 150 psig• Automatic water drain• Mounting bracket• Jamec Pem branded Pressure gauge• Robust Metal construction


reGUlAtOr – Air

Filter regulator• Polycarbonate bowl with Metal bowl guard• 1/2” BSP Inlet/Outlet• Max. working pressure 150 psig• Automatic water drain• Mounting bracket• Robust Metal construction


Nitto Needle ScalersNitto Jet Chisels are the only unit of its kind without

Powered by a piston which produces no irregular powerAdjusts automatically to any surface contour

Standard Needle Size Body typetypet

Nitto Needle ScalersNitto Jet Chisels are the only unit of its kind without

Powered by a piston which produces no irregular powerAdjusts automatically to any surface contour

Standard Needle Size Body typetypet

JeX28

riVeterS

Air Powered rivet Gun - Medium duty • 2,000lbs of pull • Sets rivets up to 4.8mm in diameter


Pneumatic riveting tool Heavy duty industrial• 15mm stroke• 1200lbs pulling power• Sets 6.4mm rivets Complete in• Sturdy Zip Pouch with Carry handle

Part Number: FHFFS64

Air riveter• Stroke length - 9/16” • Blind rivet capacity - 3/16” • 90 PSI • 76 dBA • Length - 156mm • Weight - 2kg

Part Number: SG0810

SANderS

178mm Air Sander - Medium duty• 4500 RPMs designed to smooth welds, remove rust and remove body filler • Built in regulator • Requires a 2 stage air compressor • Planetary gearing balances load on bearings and gears for greater power • 15.1 SCFM average air consumption at 90PSI


178mm Air Sander - Medium duty

Needle Scaler• 4600 bpm• 19 needles (3.2 mm)• Length 465mm• Weight 2.8kg• Avg Air Consumption: 8 cfm 226 lpm

Part Number: 125

Avg Air Consumption: 8 cfm 226 lpm


AIR

TOOL

S &

EQU

IPM

ENT

(COM

PRES

SORS

)

310

6” High Speed Sander• 6” High Speed• 3/16” Orbit• Ultra Duty• 12,000rpm• Vacuum ready• Weight: 0.87kg• Ave Air Cons: 8 cfm 226 lpm• Dust is channelled away from work, swirl free finish.

Part Number: 4151/4151-Hl

Dust is channelled away from work, swirl free finish.

Air Palm Sander • Pad size - 6” • 11,000 RPM • 76 dBA • Spindle thread - 5/16” - 24 • Length - 163mm • Weight - 0.8kg

Part Number: SM095

dual Action Sander - 10,000rpm - Heavy duty• 10,000 RPMs • Designed for sanding wood, metal, fibreglass and autobody fillers


ual Action Sander - d

metal, fibreglass and autobody fillers

ual Action Sander - duty

SAW

Nitto Super Saw• Cutting capacity 3mm in mild steel• Low vibration and longer piston stroke improves cutting speed• Rear exhaust system for chip-scattering free operation

Model Number Stroke Speed Stroke Weight

SSW-110 7,000 rpm 11mm 0.6 kg

SSW-110

Air Screwdriver• Torque - 10-90 in Lb • Hex drive capacity - 1/4” • 1,800 RPM • 83 dBA • Length - 196mm • Weight - 1.3kg

Part Number: SM120

Hex drive capacity - 1/4”

Weight - 1.3kg

Hex drive capacity - 1/4”

Weight - 1.3kg

SCreWdriVerS

Quick Change Screwdriver - Medium duty• At 10,500 RPMs and 120lbs of Torque, provides the power necessary to remove tight screws easily. • Ideal for small fastening work in electronic products • Computer assembly and automotive application • Quick change chuck uses 1/4” Hex bits

Part Number: CHSA1575

Quick Change Screwdriver - Medium

At 10,500 RPMs and 120lbs of Torque, provides the power necessary to remove tight screws easily. Ideal for small fastening work in electronic productsComputer assembly and automotive application

Screwdriver - Medium duty

tyre Gauge• Dual scale gauge • Dual hold-on chuck lever• Precision die cast body • Certificate of calibration


tyre GAUGeS

tyre iNFlAtOr

tyre inflator• Straight clip on chuck• 50mm dial gauge with rubber impact protector


50mm dial gauge with rubber impact protector

digital tyre Gauge• Aluminium body with oil resistant rubber casing• 5psi to 150psi measuring range • Accurate to ±1%• Two position lever for inflation and deflation• Display powered by two CR2032 Lithium batteries• Battery life of 140 hours • Can be turned on and off as required• 1/4” BSP(f) inlet• Can measure pressures in kpa, psi, kg/cm2 and bar

Part Number: 51114

Aluminium body with oil resistant rubber casingAccurate to ±1%

Two position lever for inflation and deflationDisplay powered by two CR2032 Lithium batteries

Part Number descriptionSM135 12 Piece Air Utility In-Line Driver Kit, 3,500 RPM, 83 dBA

SM135rH Adaptor for Rubber Eraser or BrushSM135rW Rubber EraserSM135BW 6 Piece Black Strip Wheels

SM135WW723 Wire Brushes, 23mm CoarseSM135WW523 Wire Brushes, 23mm Fine

Utility driver kit • Used extensively in the panel beating industry.includes: • Utility in-line driver• Adaptor for rubber eraser or brush• Adaptor for double black wheels • Adaptor for single black wheel• Water based paint rubber eraser • Rubber eraser • 6 x black strip wheels

description

Utility kit



311

WreNCHeS - iMPACt

1/2” dr twin Hammer impact Wrench - Heavy duty• At 380ft. lb of torque power for stubborn bolts. • Built-in power regulator to control speed and torque


1/2” dr impact Wrench - Heavy duty• 450ft lbs 1/2” impact wrench • Designed for tyre shop, suspension, chassis and other heavy duty automobile applications


mpact Wrench

Built-in power regulator to control speed and torque

mpact Wrench

Built-in power regulator to control speed and torque

mpact Wrench - Heavy

Designed for tyre shop, suspension, chassis and

mpact Wrench - Heavy duty

Designed for tyre shop, suspension, chassis and

1/2” dr impact Wrench• Ultimate torque - 600ft lb • Working torque range - 50 - 460 ft lb • 7,000 RPM • 88 dBA • Length - 204mm • Weight - 2.2kg

Part Number: SM030

1/2” Square drive impact Wrench• Composite body• Reversible• Max Torque: 627 ft.lbs / 850Nm• Working Torque: 0-457 ft.lbs

Part Number: e1490

mpact Wrench

1/2” impact Gun twin dog Hammer Characteristics • 185mm long • 2.58kg • 16mm capacity • 600ft/lbs max torque • 870L/min max, 261L/min av air consumption

Product Code: SP-1140eX

1/2” impact Gun twin Pin Hammer Characteristics • 190mm long • 2.5kg • 16mm capacity • 425ft/lbs max torque • 808L/min max, 242L/min av air consumption

Product Code: SP-1145A

®

®

win Pin Hammer

425ft/lbs max torque808L/min max, 242L/min av air consumption

1/2” Air impact Wrench• Twin hammer mechanism• High torque and powerful• Bolt capacity: 5/8” (16mm)• Maximum torque: 1,000 ft-lb (1350Nm)• Free speed: 10,000 rpm• Air inlet: 1/4”• Maximum air pressure: 90psi

Part Number: 61114

og Hammer

600ft/lbs max torque

1/2” impact Wrench 780ft-lb • Ultimate 1/2” Drive • Max Torque: 780 ft-Ib• Adjustable Dial Power• 2135Ti-2MAX 2” Anvil• Handle exhaust• Lightweight Composite Body 1.79kg• Av. Air Consumption 5cfm• 2135QTiMax Quiet Tool Technology• Also available in a kit, 2135TiMax-Kit

Part Number: 2135tiMax

1/2” impact Wrench 450ft-lb• Max Torque: 450 ft-Ib (rev) • Pressure Feed lubrication • Adjustable power regulator• Weight 2.63kg• Av. Air Consumption 4.2cfm• Handle exhaust • 2” extended anvil avail. 131S-2-EA• Also available in a kit, 131S-EA-Kit

Part Number: 131S-eA & 131S-2-eA

Also available in a kit, 2135TiMax-Kit

mpact Wrench 450ft-lbmpact Wrench 450ft-lb

1/2” impact Wrench 600ft-lb• 1/2” Drive• Max Torque: 550 ft-Ib• Adjustable Dial Power• 2” extended anvil model avail, 2130AP-2• Handle exhaust• Lightweight Composite Body 1.90kg• Av. Air Consumption 4.4cfm• Also available in a kit

Part Number: 2130AP & 2130AP-2

2” extended anvil model avail, 2130AP-2

mpact Wrench 600ft-lb


AIR

TOOL

S &

EQU

IPM

ENT

(COM

PRES

SORS

)

312

3/4” impact Wrench 1200ft-lb• 3/4” Drive• Max Torque: 1200 ft-Ib• Weighs just 3.2 kg• Lightweight Composite Body 3.2kg• Only 208 mm long• Handle exhaust• Av. Air Consumption 9.5cfm• 2141S ‘New Silenced Mode’• Also available in a kit, 2141-Kit

Part Number: 2141

mpact Wrench 1200ft-lbmpact Wrench 1200ft-lb

‘Spark Proof’ 1/2” impact Wrench 600ft-lb • Fully Certified to ATEX Directives• ½” Square drive Impact wrench• Max Torque 600ft-lb reverse• High output Twin Hammer• Av. Air Consumption 4.8cfm• Pressure-feed lubrication system• Reverse biased motor cylinder• One hand operation forward/reverse• 360 degree swivel inlet• In-handle exhaust

Part Number: 2131PSP

3/4” dr impact Wrench• Torque - 950ft lb • 4,000 RPM • Bolt capacity - 1-1/16” • 90.8 dBA • Length - 235mm • Weight - 5.6kg

Part Number: SG0756

1” dr impact Wrench• Torque - 1,200ft lb • 4,000 RPM • Bolt capacity - 1-1/4” • 82 dBA • Length - 355mm • Weight - 10.2kg

Part Number: SG0708S

3/4” impact Gun twin Pin Hammer Characteristics • 280mm long • 5.4kg • 25mm capacity • 950ft/lbs max torque • 971L/min max, 291L/min av air consumption

Product Code: SP-1156tr

1” impact Gun Jumbo HammerCharacteristics • 250mm long • 9kg • 38mm capacity • 1800ft/lbs max torque• 1130L/min max, 339L/min av air consumption

Product Code: SP-1190P

3/4” impact Gun Jumbo HammerCharacteristics • 220mm long • 5.5kg • 25mm capacity • 1100ft/lbs max torque• 1080L/min max, 324L/min av air consumption


®

®

®

win Pin Hammer

950ft/lbs max torque971L/min max, 291L/min av air consumption

mpact Gun Jumbo Hammer

mpact Gun Jumbo Hammer

1800ft/lbs max torque

1” Pistol Grip impact Wrench 1200ft-lb• 1” Drive• Max Torque: 1200ft-Ib• Weighs just 3.4 kg• Handle exhaust• Only 208 mm long

Part Number: 2150

d-Handle impact Wrench 1450ft-lb• 1” Drive• Max Torque: 1,450ft-Ib• Side handle• 4 Position power regulator• Angled down exhaust• 360 degree swivel inlet• 6” extended anvil model avail 285B-6

Part Number: 285B & 285B-6



6” extended anvil model avail 285B-6


6” extended anvil model avail 285B-6

kuken impact Wrenches ‘N’ type• Ideal for heavy industrial and mining applications • Ergonomic design, low vibration and low noise• Innovative no hammer clutch system• Excellent power, compactness, light in weight with very low air consumption• Shift on action ensure less damage to bolts and nuts

mpact Wrenches ‘N’ typetypet

kt3800G PrO

Model Number

Squaredrive

Handle type

Bolt Capacity

Max torque Speed(rpm)

WeightNm ft/lbs

kt1600S PrO 1/2” Pistol 16mm 490 360 8,000 1.46 kg

kt2500P PrO 3/4” Pistol 25mm 1150 880 4,500 4.2 kg

kt2800PA 3/4” Pistol 28mm 1380 1000 3,300 5.2 kg

kt3800G PrO 1” D- Handle 38mm 1800 1300 4,200 6.4 kg

kt4500G 1” D- Handle 45mm 2750 1980 3,700 10.7 kg

kt5000G 1 1/2” D- Handle 50mm 3500 2600 3,000 16.0 kg



313

kuken impact Wrenches Conventional• Ideal for all heavy duty applications in mining, truck and construction applications• Delivers extra powerful performance and durability• Well balanced for easy handling• Wide variety of models available to suit most fastening applications

Model Number

Squaredrive

Handle type

Bolt Capacity

Max torque Speed(rpm)

WeightNm ft/lbs

kt18HP 1/2” Pistol 18mm 380 280 7,400 2.5 kg

kt20P 3/4” Pistol 20mm 700 480 4,500 4.2 kg

kt420G 1” D-Handle 42mm 2900 2200 3,000 13.1 kg

kt20P

mpact Wrenches ConventionalIdeal for all heavy duty applications in mining, truck and

• Delivers extra powerful performance and durability

kt20P

Part Number description Bolt Capacity

SM30 3/8” DR Ratchet 3/8”

SM31 1/2” DR Ratchet 1/2”

3/8 & 1/2” dr ratchets • Torque - 50ft lb • 150 RPM• Length - 250mm • Weight - 1.1kg • Compact head design allows flexibility in tight areas

Part Number description

SM036 1/4” DR Mini Ratchet

SM041 3/8” DR Mini Ratchet, Wobble Anvil

1/4 & 3/8’’ dr ratchets• Torque - 30ft lb • 260 RPM • 85 dBA • Length - 133mm • Weight - 0.4kg

Length - 133mm

1/2” drive Air Wrench• Front exhaust• Max Torque: 66 ft.lbs / 89Nm

Part Number: e1325A

rive Air Wrench

WreNCHeS - rAtCHet

3/8” dr Heavy ‘Stubby’ Air ratchet• “Stubby” air ratchet. • Durable aluminium body rear exhaust. • Heavy duty ratchet head. • 18ft/lb 250RPM.

Part Number: CHSA1601

r Heavy ‘Stubby’ Air ratchetr Heavy ‘Stubby’ Air ratchet

3/8” dr Air ratchet - Heavy duty• 55ft. lbs of torque provides the power to remove and install nuts, bolts and spark plugs in medium duty engine repair.


1/2” dr Air ratchet - Medium duty• 90ft. lbs of torque provides the power to remove and install large fasteners on outboard engines, tractors and other heavy machinery. • Ball socket retainer provides fast and easy socket replacement.


3/8” Mini ratchet WrenchCharacteristics• 170mm long • 310rpm • 10mm capacity • 40ft/lbs hand torque• 485L/min max, 146L/min av air consumption


3/8” ratchet Characteristics • 254mm long • 160rpm • 10mm capacity • 124ft/lbs hand torque• 525L/min max, 158L/min av air consumption

Product Code: SP-1133SX

1/2” ratchetCharacteristics • 254mm long • 160rpm • 12mm capacity • 124ft/lbs hand torque • 525L/min max, 158L/min av air consumption

Product Code: SP-1133SX-2

®

®

atchet Wrench

• 160rpm • 124ft/lbs hand torque

525L/min max, 158L/min av air consumption

ratchet Wrench• 3/8” drive (170) or 1/2” drive (1770)• Max Torque: 60 ft-Ib (81 Nm)• Working Torque: 10-55 ft-Ib• Great value IR ratchet• Length: 260 mm• Weight: 1.1 kg• Ave Air Cons: 4.0 cfm 113 lpm

Part Number: 170 & 1770

3/8” drive (170) or 1/2” drive (1770)


Documents

AIR TOOLS & EQUIPMENT (COMPRESSORS) · 2019-10-10 · AIR TOOLS & EQUIPMENT (COMPRESSORS) 301 COMPreSSOrS - POrtABle 7.5kW type 30 Compressor • T30 Cast-Iron pump • Star Delta