Air systems july flyer

1

NYLON 12 RECOIL AIR HOSE

Yellow, Brass Nickel Plated Swivel, BSPT0306

NRH516-12Y 1/4” 6 5/16” 8 12 3.6 1/4” 12.16NRH516-25Y 1/4” 6 5/16” 8 25 7.6 1/4” 18.25NRH516-40Y 1/4” 6 5/16” 8 40 12.2 1/4” 24.37NRH38-12Y 5/16” 8 3/8” 10 12 3.6 1/4” 14.47NRH38-25Y 5/16” 8 3/8” 10 25 7.6 1/4” 22.33NRH38-40Y 5/16” 8 3/8” 10 40 12.2 1/4” 29.84NRH12-12Y 3/8” 10 1/2” 13 12 3.6 3/8” 25.76NRH12-40Y 3/8” 10 1/2” 13 40 12.2 3/8” 66.45

Red, Brass Nickel Plated Swivel, BSPT0306

NRH516-12R 1/4” 6 5/16” 8 12 3.6 1/4” 11.86NRH516-25R 1/4” 6 5/16” 8 25 7.6 1/4” 17.83NRH38-12R 5/16” 8 3/8” 10 12 3.6 1/4” 14.05NRH38-25R 5/16” 8 3/8” 10 25 7.6 1/4” 21.65NRH38-40R 5/16” 8 3/8” 10 40 12.2 1/4” 30.22NRH12-12R 3/8” 10 1/2” 13 12 3.6 3/8” 24.48NRH12-25R 3/8” 10 1/2” 13 25 7.6 3/8” 47.37NRH12-40R 3/8” 10 1/2” 13 40 12.2 3/8” 67.02

Blue, Brass Nickel Plated Swivel, BSPT0306

NRH516-12B 1/4” 6 5/16” 8 12 3.6 1/4” 12.16NRH516-25B 1/4” 6 5/16” 8 25 7.6 1/4” 18.25NRH38-12B 5/16” 8 3/8” 10 12 3.6 1/4” 14.47NRH38-25B 5/16” 8 3/8” 10 25 7.6 1/4” 22.33NRH38-40B 5/16” 8 3/8” 10 40 12.2 1/4” 29.84NRH12-12B 3/8” 10 1/2” 13 12 3.6 3/8” 25.76NRH12-25B 3/8” 10 1/2” 13 25 7.6 3/8” 49.11

See page 513

One of the largest selection of recoil hoses in the UK

SEE INSIDEFOR OFFERS ON...

• CONAH Hose Reels • HiPRHO Pressure Washers

• AEROPRO Pneumatic Power Tools • Pressure Transmitters

• Hose Burst Valves • ISO B Interchange Couplings & Plugs

& much more!

1 PLEASE NOTE: All special prices will only apply where the specifi ed order quantities shown, are ordered. Detailed Technical information for these products can be found within our catalogue or online

Tel: +44(0) 1952 290959www.airsystemsgroup.co.uk

[email protected]

DON’T MISSAMAZING OFFERS

All offer prices are valid from 14th July until

31st August 2014. Prices exclude VAT.

JULY/AUGUST

PLEASE NOTE: All special prices will only apply where the specifi ed order quantities shown, are ordered. Detailed Technical information for these products can be found within our catalogue or online

DON’T MISS AMAZING OFFERS

PLEASE NOTE: All special prices will only apply where the specifi ed order quantities shown, are ordered. Detailed Technical information for these products can be found within our catalogue or online2


[email protected]

DON’T MISS AMAZING OFFERS All offer prices are valid from 14th July until 31st August 2014. Prices exclude VAT. JULY/AUGUST

Nylon Recoil Hoses

Nylon 12 Recoil Hose, Equal Tails• Low moisture absorption. • Excellent resistance to a wide range of chemicals.• Safety Factor of 3 to 1.

Applications: • Fuel lines.• Oil lines.• Petrol tank breather lines.• Pneumatic lines.• Bleed lines.• Brake controls.Also available in blue and yellow.

Temperature Range:-40°C to +80°C

Tech Sheet 3137

Nylon 12 Coil Hose with Tails• Low moisture absorption. • Excellent resistance to a wide range of chemicals.• Safety Factor of 3 to 1.

Applications: • Fuel lines.• Oil lines.• Petrol tank breather lines.• Pneumatic lines.• Bleed lines.• Brake controls.

Tech Sheet 3138

BSPT0306

NB316182.5MB 1/8” 1/4” 2.5 1/8” Blue 8.55N12C1417025MB 3/16” 1/4” 2.5 1/4” Blue 7.60N12C1417025MY 3/16” 1/4” 2.5 1/4” Yellow 7.75N12C141705MR 3/16” 1/4” 5 1/4” Red 10.64N12C1417010MR 3/16” 1/4” 10 1/4” Red 14.90N12C1417010MB 3/16” 1/4” 10 1/4” Blue 15.39N12C1417010MY 3/16” 1/4” 10 1/4” Yellow 15.05N12C1417015MR 3/16” 1/4” 15 1/4” Red 19.87N12C1417015MB 3/16” 1/4” 15 1/4” Blue 21.62N12C1417015MY 3/16” 1/4” 15 1/4” Yellow 19.46N12C51623225MR 1/4” 5/16” 2.5 1/4” Red 7.68N12C51623225MB 1/4” 5/16” 2.5 1/4” Blue 8.17N12C51623225MY 1/4” 5/16” 2.5 1/4” Yellow 8.47N12C5162335MR 1/4” 5/16” 5 1/4” Red 12.88N12C5162335MB 1/4” 5/16” 5 1/4” Blue 12.88N12C5162335MY 1/4” 5/16” 5 1/4” Yellow 11.67N12C5162327.5MR 1/4” 5/16” 7.5 1/4” Red 15.16N12C5162327.5MB 1/4” 5/16” 7.5 1/4” Blue 15.16N12C51623410MR 1/4” 5/16” 10 1/4” Red 18.05N12C51623410MB 1/4” 5/16” 10 1/4” Blue 17.97N12C51623410MY 1/4” 5/16” 10 1/4” Yellow 18.05N12C51623515MR 1/4” 5/16” 15 1/4” Red 24.51N12C51623515MB 1/4” 5/16” 15 1/4” Blue 24.36N12C51623515MY 1/4” 5/16” 15 1/4” Yellow 25.54N12C3827525MR 5/16” 3/8” 2.5 3/8” Red 15.05N12C3827525MY 5/16” 3/8” 2.5 3/8” Yellow 15.47N12C382755MR 5/16” 3/8” 5 3/8” Red 18.89N12C382757.5MB 5/16” 3/8” 7.5 3/8” Blue 23.33N12C3827510MR 5/16” 3/8” 10 3/8” Red 29.98N12C3827510MY 5/16” 3/8” 10 3/8” Yellow 29.98N12C3827515MR 5/16” 3/8” 15 3/8” Red 40.36N12C3827515MB 5/16” 3/8” 15 3/8” Blue 39.37N12C3827515MY 5/16” 3/8” 15 3/8” Yellow 40.36N12C1237525MR 3/8” 1/2” 2.5 1/2” Red 19.23N12C1237525BU 3/8” 1/2” 2.5 1/2” Blue 19.38N12C1237525MY 3/8” 1/2” 2.5 1/2” Yellow 16.76N12C123755MR 3/8” 1/2” 5 1/2” Red 28.16N12C123755MB 3/8” 1/2” 5 1/2” Blue 24.09N12C123755MY 3/8” 1/2” 5 1/2” Yellow 28.16N12C123757.5MB 3/8” 1/2” 7.5 1/2” Blue 40.13N12C1237510MR 3/8” 1/2” 10 1/2” Red 56.77N12C1237510MB 3/8” 1/2” 10 1/2” Blue 55.40N12C1237510MY 3/8” 1/2” 10 1/2” Yellow 53.62N12C1237515MR 3/8” 1/2” 15 1/2” Red 74.94N12C1237515MB 3/8” 1/2” 15 1/2” Blue 72.85N12C1237515MY 3/8” 1/2” 15 1/2” Yellow 74.94

BSPT0306

N12C60402.5MB 4 6 2.5 1/4” Blue 7.49N12C60405MB 4 6 5 1/4” Blue 9.84N12C604010MB 4 6 10 1/4” Blue 14.44N12C604015MB 4 6 15 1/4” Blue 20.25N12C60402.5MR 4 6 2.5 1/4” Red 7.49N12C60405MR 4 6 5 1/4” Red 9.88N12C604015MR 4 6 15 1/4” Red 23.67N12C80602.5MB 6 8 2.5 1/4” Blue 8.40N12C80605MB 6 8 5 1/4” Blue 11.55N12C806010MB 6 8 10 1/4” Blue 17.94N12C806015MB 6 8 15 1/4” Blue 24.32N12C80602.5MR 6 8 2.5 1/4” Red 8.47N12C80605MR 6 8 5 1/4” Red 11.44N12C806010MR 6 8 10 1/4” Red 17.78N12C806015MR 6 8 15 1/4” Red 24.55N12C100802.5MB 8 10 2.5 1/4” Blue 11.17N12C100805MB 8 10 5 1/4” Blue 15.20N12C1008010MB 8 10 10 1/4” Blue 23.37N12C1008015MB 8 10 15 1/4” Blue 33.25N12C100802.5MR 8 10 2.5 1/4” Red 11.17N12C100805MR 8 10 5 1/4” Red 15.35N12C1008010MR 8 10 10 1/4” Red 23.60N12C1008015MR 8 10 15 1/4” Red 33.59N12C120902.5MB 9 12 2.5 3/8” Blue 13.57N12C120905MB 9 12 5 3/8” Blue 22.65N12C1209010MB 9 12 10 3/8” Blue 36.75N12C120902.5MR 9 12 2.5 3/8” Red 16.07N12C120905MR 9 12 5 3/8” Red 23.03N12C1209010MR 9 12 10 3/8” Red 38.34N12C1209015MR 9 12 15 3/8” Red 52.33

See page 515

See page 514

3 PLEASE NOTE: All special prices will only apply where the specifi ed order quantities shown, are ordered.

Detailed Technical information for these products can be found within our catalogue or online 3


[email protected]


ISO B Interchange Couplings & Plugs

ISO B Interchange Tech Sheet 10003

Brass ISO B Plug with Nitrile Seal, BSPP0249

HKP02B 1/8” 200 4.20HKP04B 1/4” 180 4.16HKP06B 3/8” 180 4.91HKP08B 1/2” 160 7.64HKP12B 3/4” 120 12.14HKP16B 1” 120 20.79

Temperature Range:-25°C to +120°C Nitrile-25°C to +175°C Viton

Brass ISO B Plug with Viton Seals, BSPP0249

HKP02B-V 1/8” 200 4.41HKP06B-V 3/8” 180 5.12HKP08B-V 1/2” 160 8.23HKP16B-V 1” 120 21.97

316 Stainless Steel ISO B Plug with Nitrile Seal, BSPP0249

HKP02SS 1/8” 250 7.14HKP04SS 1/4” 250 7.22HKP06SS 3/8” 200 11.80HKP08SS 1/2” 200 16.04HKP12SS 3/4” 160 25.87HKP16SS 1” 125 39.35

Carbon Steel ISO B Plug with Nitrile Seal, BSPP0249

HKP04CS 1/4” 350 2.69HKP06CS 3/8” 315 3.15HKP08CS 1/2” 250 3.78HKP12CS 3/4” 230 5.33HKP16CS 1” 200 10.63

316 Stainless Steel ISO B Plug with Viton Seal, BSPP0249

HKP04SS-V 1/4” 250 8.06HKP08SS-V 1/2” 200 16.55HKP12SS-V 3/4” 160 27.89HKP16SS-V 1” 125 40.03

Brass ISO B Coupling with Nitrile Seal, BSPP0249

HKS02B 1/8” 200 9.79HKS04B 1/4” 180 9.70HKS06B 3/8” 180 13.78HKS08B 1/2” 160 21.55HKS12B 3/4” 120 37.17HKS16B 1” 120 55.57

316 Stainless Steel ISO B Coupling with Nitrile Seal, BSPP0249

HKS02SS 1/8” 250 15.41HKS04SS 1/4” 250 16.72HKS06SS 3/8” 200 28.48HKS08SS 1/2” 200 44.18HKS12SS 3/4” 160 74.55HKS16SS 1” 125 105.55

Brass ISO B Coupling with Viton Seals, BSPP0249

HKS04B-V 1/4” 180 10.54HKS06B-V 3/8” 180 14.53HKS08B-V 1/2” 160 23.18HKS12B-V 3/4” 120 38.47HKS16B-V 1” 120 59.26

316 Stainless Steel ISO B Coupling with Viton Seal, BSPP0249

HKS04SS-V 1/4” 250 17.47HKS06SS-V 3/8” 200 30.20HKS12SS-V 3/4” 160 74.59HKS16SS-V 1” 125 116.93

Other seals availble on request

Carbon Steel ISO B Coupling with Nitrile Seal, BSPP0249

HKS06CS 3/8” 315 6.72HKS08CS 1/2” 250 10.75HKS12CS 3/4” 230 13.61HKS16CS 1” 200 19.32

See pages 285-286

SEE PAGE 176for Breaker Hose Assemblies


Detailed Technical information for these products can be found within our catalogue or online4


[email protected]


Pressure Transmitters

Hermetically Sealed Modular Pressure SensorTypical Applications:CompressorsHydraulic systemsAgricultural equipmentConstruction equipmentHeat pumpsWind energyHVAC systemsChemical Industry

Tech Sheet 10198

M12 Connection, 4-20 mA, 1/4” BSPP0378

PTE50000101B1C 10 48.40PTE50000161B1C 16 48.40PTE50001001C4C 100 48.40PTE50002501C4C 250 48.40PTE50004001C4C 400 48.40PTE50006001C4C 600 48.40

M12 Connection, 0-10V, 1/4” BSPP0378

PTE50000104B1C 10 48.40PTE50000164B1C 16 48.40PTE50001004C4C 100 48.40PTE50002504C4C 250 48.40PTE50004004C4C 400 48.40PTE50006004C4C 600 48.40

DIN 175301-803-A Connection, 4-20 mA, 1/4” BSPP0378

PTE50000101B1A 10 48.40PTE50001001C4A 100 48.40PTE50002501C4A 250 48.40PTE50004001C4A 400 48.40PTE50006001C4A 600 48.40

DIN 175301-803-A Connection, 0-10V, 1/4” BSPP0378

PTE50000104B1A 10 48.40

M12 Connecting Plug

2 Metre Cable Assembly0378

181E-1003 14.30

Tech Sheet 10132

PG110347

GDM2011-B 250V AC/DC No LED, Black 1.06GDM2011-G 250V AC/DC No LED, Grey 1.06GDML2011-GB1-B 250V AC/DC Bridge-type Rectifi er No LED 6.84GDML2011LED-24-B 24V AC/DC LED No Protection 6.74GDML2011LED-120B 120V AC/DC LED No Protection 6.82GDML2011LED-230B 230V AC/DC LED No Protection 6.82GDML2011LED-24HH 24V DC LED With Diode Protection 6.54GDML2011LED-48HH 48V DC LED With Diode Protection 6.98

EN75301-803,DIN43650

Features:• Hermetically sealed• Rugged and durable• Compact and lightweight• Resistant to chemical attack• Superior long-term stability and repeatability• Outstanding shock and vibration performance• Supplied without electrical connector

See pages 93 & 103

FULL RANGE OF SET PRESSURES AVAILABLE PLEASE REFER TO CATALOGUE PAGE 103




[email protected]


Hydraulic Ball ValvesOperating Temperature:-20°C to +120°C

Tech Sheet 10171

2 Way, Light Duty, DIN 23530177

KHB-10L M16 x 1.5 10L 77 500 12.53KHB-12L M18 x 1.5 12L 77 500 12.53KHB-15L M22 x 1.5 15L 83 500 13.50KHB-22L M30 x 2 22L 101 315 23.87KHB-28L M36 x 2 28L 108 315 35.96

2 Way, Heavy Duty, DIN 23530177

KHB-10S M18 x 1.5 10S 73 500 9.99KHB-12S M20 x 1.5 12S 77 500 12.53KHB-16S M24 x 1.5 16S 87 500 13.50KHB-20S M30 x 2 20S 91 315 23.87KHB-25S M36 x 2 25S 111 315 23.87KHB-30S M42 x 2 30S 120 315 35.96

Threaded Hydraulic ValvesDirect Acting Sequence ValvesPre-Set & Other Spring Ratings Available on Request.

Maximum Working Pressure:350 bar

Tech Sheet 10098

BSPP0347

DASV06 3/8” 10-180 29.47DASV08 1/2” 10-180 36.29DASV12 3/4” 50-350 78.48

Double Overcentre Valves1:8 Pilot Ratio Available on Request

Tech Sheet 10100

BSPP0347

DOCV06 3/8” 1:3.1 82.15DOCV08 1/2” 1:3.1 85.92DOCV12 3/4” 1:5.5 130.58

Double Pilot Operated Check ValvesOther Cracking Pressures Available on Request

Tech Sheet 10103

BSPP0347

DPOCV04 1/4” 4.5 1:5.5 19.39DPOCV06 3/8” 4.5 1:5.5 22.30DPOCV08 1/2” 3 1:4.5 26.30

Single Pilot Operated Check Valves

Tech Sheet 10102

BSPP0347

POCV04 1/4” 4 1:5.5 21.67POCV06 3/8” 3 1:5.5 24.17POCV08 1/2” 6 1:5 32.11

Relief ValvesPre-Set & Other Spring Ratings Available on Request


Tech Sheet 10101

Relief Valve, 300 bar, BSPP0347

RV06/180 3/8” 10-180 21.46RV08/180 1/2” 10-180 23.59RV12/180 3/4” 10-180 31.34

Single Overcentre Valves

Tech Sheet 10099

BSPP0347

SOCV06 3/8” 1:3.1 50.40SOCV08 1/2” 1:3.1 51.50SOCV12 3/4” 1:5.5 84.02

See pages 101 & 239




[email protected]


Threaded Hydraulic Valves

3 Way Diverter ValvesClosed Centre Confi guration Available on Request


Tech Sheet 10105

Open Centre, BSPP0347

DV306 3/8” 35 24.07DV308 1/2” 60 27.41DV312 3/4” 100 31.97

4 Way Diverter ValvesP to T, A & B Closed, Available on Request

Tech Sheet 10106

All Ports Closed, BSPP0347

DV406 3/8” 35 31.30DV408 1/2” 60 35.42DV412 3/4” 100 48.19

BSPP0347

SV04 1/4” 450 30 13.58SV06 3/8” 450 45 14.09SV08 1/2” 450 70 15.10SV12 3/4” 350 110 22.58

Maximum Working Pressure: 350 bar

Tech Sheet 10107

Female/Female, BSPP0347

HBVF04 1/4” 25 6.57HBVF06 3/8” 50 7.56HBVF08 1/2” 80 8.10HBVF12 3/4” 140 12.78HBVF16 1” 180 21.42

Male/Female, BSPP0347

HBVMF04 1/4” 25 6.57HBVMF06 3/8” 50 7.56HBVMF08 1/2” 80 8.10HBVMF12 3/4” 140 12.78HBVMF16 1” 180 21.42

Cartridge0347

HBVC04 1/4” 4.32HBVC06 3/8” 4.32HBVC08 1/2” 5.04HBVC12 3/4” 7.56HBVC16 1” 11.70

See page 102

e

Shuttle Valves Tech Sheet 10104

SPECIAL OFFERS HOSE BURST VALVES

SALE OR RETURN OFFERTRIAL HIGH QUALITY AEROPRO AIR TOOLS

& CONAH HOSE REEL AT GREAT PRICES

Order 5 or more items from these ranges before 31st August to take advantage of this fantastic SALE OR RETURN OFFER*

SEE PAGES 14-16 OF THIS FLYER

*Any returns will be accepted up to 30th September 2014. Goods must be in a re-saleable condition & packaging undamaged




[email protected]


Hydraulic Accessories

Aluminium In-line Heavy Duty Return Filter

Absolute & Stainless Steel mesh elements available on request

Max Working Temperature:+80°C


Tech Sheet 10215

Replacement Element to Suit ILFR*0347

ILFE-1-10 ILFR1 10 2.16ILFE-1-25 ILFR1 25 2.14ILFE-2-10 ILFR2 10 2.62ILFE-2-25 ILFR2 25 2.62ILFE-3-10 ILFR3 10 4.19ILFE-3-25 ILFR3 25 4.19

Suction & No By-pass models available on request

Ab l t & St i l St l h l t

1 bar By-pass, BSPP0347

ILRF1-08-10 1/2” 10 12.52ILRF1-08-25 1/2” 25 13.02ILRF2-12-10 3/4” 10 15.45ILRF2-12-25 3/4” 25 18.94ILRF2-16-10 1” 10 16.26ILRF2-16-25 1” 25 19.57ILRF3-20-10 1.1/4” 10 32.33ILRF3-20-25 1.1/4” 25 37.81ILRF3-24-10 1.1/2” 10 34.02ILRF3-24-25 1.1/2” 25 35.15

Return Line Diffuser

Tech Sheet 10053

BSPP0347

RLD-12 3/4” 50 4.58RLD-16 1” 100 6.54RLD-20 1.1/4” 200 8.21RLD-24 1.1/2” 300 9.05RLD-32 2” 400 8.32RLD-40 2.1/2” 500 18.10RLD-48 3” 600 21.05

Spin On Element to Suit S*FH Tech Sheet 10054

BSPP0347

SE-035-10-12 1/2”, 3/4”, 1” 10 35 4.86SE-035-10A-12 1/2”, 3/4”, 1” 10ABS 35 11.25SE-035-25-12 1/2”, 3/4”, 1” 25 35 4.60SE-070-10-12 1/2”, 3/4”, 1” 10 70 8.06SE-070-10A-12 1/2”, 3/4”, 1” 10ABS 70 20.01SE-070-25-12 1/2”, 3/4”, 1” 25 70 8.06SE-100-10-12 1/2”, 3/4”, 1” 10 100 13.05SE-100-10A-12 1/2”, 3/4”, 1” 10ABS 100 27.64SE-100-25-12 1/2”, 3/4”, 1” 25 100 13.05SE-150-10-20 1.1/4” 10 150 19.28SE-150-25-20 1.1/4” 25 150 20.35SE-200-10-20 1.1/4” 10 200 25.60SE-200-25-20 1.1/4” 25 200 30.42

Working Pressure 10 bar, BSPP Post, BSPP Ports0347

SRFH-08 1/2” Return 7.22SSFH-08 1/2” Suction 7.22SRFH-12 3/4” Return 6.56SSFH-12 3/4” Suction 7.27SRFH-16 1” Return 7.22SSFH-16 1” Suction 7.27SRFH-20 1.1/4” Return 11.80SSFH-20 1.1/4” Suction 11.80

SuctionStrainers

Tech Sheet 10052

149 Micron, BSPP 0347

SS020-08 1/2” 20 3.66SS030-12 3/4” 30 3.35SS040-16 1” 40 4.13SS080-20 1.1/4” 80 7.17SS120-24 1.1/2” 120 9.35SS200-24 1.1/2” 200 9.39SS200-32 2” 200 9.78SS300-40 2.1/2” 300 14.04SS400-48 3” 400 17.94

Tank Top Return Filter

Tech Sheet 10051

Replacement Element to suit TTF Housing0347

TTE-08-10-A 1/2” 10ABS 5.79TTE-08-25 1/2” 25 2.33TTE-12-10 3/4” 10 3.46TTE-12-10-A 3/4” 10ABS 7.98TTE-12-25 3/4” 25 4.13TTE-16-10-A 1” 10ABS 10.45TTE-16-25 1” 25 4.20TTE-20-10 1.1/4” 10 9.83TTE-20-10-A 1.1/4” 10ABS 26.56TTE-20-25 1.1/4” 25 11.52

1 bar By-Pass, 7 bar Working Pressure, BSPP0347

TTF-08B-10 1/2” 10 13.06TTF-08B-25 1/2” 25 11.61TTF-12B-10 3/4” 10 14.19TTF-12B-25 3/4” 25 15.32TTF-16B-10 1” 10 14.56TTF-16B-25 1” 25 15.88TTF-20B-10 1.1/4” 10 38.33TTF-20B-25 1.1/4” 25 44.95

TTF Seal Kit

Seal Kit to suit TTF Housing0347

TTF-SK-08 1/2” 1.38TTF-SK-12 3/4” 2.01TTF-SK-16 1” 2.01TTF-SK-20 1.1/4” 2.91

Return/Suction In-line Spin On Filter Heads

See page 108

PLEASE NOTE: All special prices will only apply where the specifi ed order quantities shown, are ordered. Detailed Technical information for these products can be found within our catalogue or online

DON’T MISS AMAZING OFFERS




[email protected]


Hydraulic Accessories

Magnetic Tank Cleaner Tech Sheet 10055

M12 Thread, 57mm OD0347

MTC-300 300 8.12MTC-450 450 12.42MTC-525 525 13.22MTC-600 600 14.12

Fluid Sight Glass

BSPP0347

SG-12 3/4” 1.77SG-16 1” 2.07SG-20 1.1/4” 2.40SG-24 1.1/2” 2.88

Visual Indicator

Return, NPT0347

VRG 1/8” 4.62

Suction, NPT0347

VSG 1/8” 5.98

Weldable Flange to Suit SG-**

Vi l

BSPP0347

WF-12 3/4” 1.92WF-16 1” 2.42WF-20 1.1/4” 2.93WF-24 1.1/2” 3.46

Breather Tech Sheet 10057

ABS, 40 Micron, BSPP0347

ABSB-06B 3/8” 1.43ABSB-08B 1/2” 1.78ABSB-12B 3/4” 1.98ABSB-16B 1” 2.75

10 Micron, 2” NPT0347

DB-1000 1000 25.49DB-1500 1500 35.98DB-2400 2400 53.96

Fluid Level Gauge

Without Thermometer0347

FLGS-76 12 76 5.58FLGS-76-10 10 76 5.12FLGS-127 12 127 6.46FLGS-127-10 10 127 5.52FLGS-254 12 254 9.50FLGS-254-10 10 254 9.56

Fluid Level Gauge

With Thermometer0347

FLTGS-76 12 76 7.78FLTGS-76-10 10 76 5.99FLTGS-127 12 127 6.46FLTGS-127-10 10 127 7.16FLTGS-254 12 254 9.59FLTGS-254-10 10 254 12.45

Tech Sheet 10058

Giant Breather, BSPP0347

GTB-12-10 3/4” 10 12.78GTB-12-25 3/4” 25 15.21GTB-20-10 1.1/4” 10 31.34GTB-20-25 1.1/4” 25 31.34

Tech Sheet 10056

Chrome Plated Steel, 40 Micron, BSPP0347

SB-04B 1/4” 2.42SB-08B 1/2” 2.31SB-12B 3/4” 4.04

Filler Breather

Chrome Plated Steel, 40 Micron0347

SFB-3-40 28 3 Bolt Mount 3.02SFB-6-40 48 6 Bolt Mount 5.05SFB-6-40-HN 48 6 Bolt Mount High Neck 6.25SFB-6-40-SM 101.6 Side Mount 9.72

5 PSI Pressurised Breather

Chrome Plated Steel, 40 Micron, BSPP0347

SPB-08B 1/2” 5.98SPB-12B 3/4” 8.28

DesiccantBreather Tech Sheet 10059 Tech Sheet

10060

See pages 109 & 110

PLEASE NOTE: All special prices will only apply where the specifi ed order quantities shown, are ordered. Detailed Technical information for these products can be found within our catalogue or online 9


[email protected]


Water & Contamination Diesel Purifi ner Tech Sheet 10200

FP100 Unit, 8mm Compression Boat Kit0375

UKFP100-8 1.9 M14 M14 70 170 206.25

FP100 Unit, 3/8” Compression Boat Kit0375

UKFP100-38 1.9 M14 M14 70 170 206.25

FP100 Unit, 8 & 10mm Purifi ner Hose Kit0375

UKFP100-10 1.9 M14 M14 70 170 187.50

FP200 Unit, complete with 8 & 10mm Flexible Hose Kit0376

UKFP200 6 M14 M14 115 200 271.88

FP500 Unit, complete with 8 & 10mm Flexible Hose Kit0376

UKFP500 10 M14 M14 115 320 300.00

FP800 Unit, complete with Plug & Valve0376

UKFP800 55 1” BSPP 1” BSPP 115 406 399.38


UKFP1000 150 1” BSPP 1” BSPP 183 530 553.13


UKFP1500 340 2” BSPP 2” BSPP 183 960 928.13

Purifi ner Accessories

Mobile Tank Cleaners0376

UKFPMTCFB800-240 28 240V 1471.88

See pages 1292 & 1293Protect your diesel engine

from water

We provide one of the most comprehensive selections of ring main products available from a single source. From power tool installations to sophisticated marine systems, we can supply a wide range of piping, tubing and fi ttings for all budgets and specifi cations.

Aluminium pipe and fi ttings for compressed air, vacuum and inert gases

Fast-track tube, fi ttings and accessories

Screwed and socketed red oxide and galvanised steel tube

Cost effective pipe supports and accessories

Pipe supports and accessories

UPVC and ABS tubing and PVC fi ttings

Cost effective galvanised and black malleable iron fi ttings and accessories

Galvanised and black malleable iron fi ttings and accessories –BSPT female, BSPT male,taper thread design

Pages 726-733 Pages 748-755

Page 981

Page 1163

Page 1188

Pages 744-745

Pages 971-980

Pages 1004-1014

745

r,

14

Galvanised and black malleable iron fi ttings and accessories –BSPP female, BSPT male

Pages 990-1003

e

003

48-755

8

For expert advice on the best ring main products to suit your application, speak to our Technical Team:

Specialists in Ring Main Solutions

Features & Benefi ts

■ AIRpipe is corrosion, vibration and heat resistant; the air quality is preserved

throughout the whole system up to the point of use, protecting the downstream

equipment and the manufacturing process

■ AIRpipe can connect seamlessly to the female thread, male thread and fl ange joints

■ Total fl ux design on the valve allows quick installation and saves energy

ADAPTABLE

DURABLE & RESISTANT

CORROSION RESISTANT: LOW PRESSURE DROP

FLEXIBLE, QUICK & EASY TO INSTALL

PR

ES

SU

RE

DR

OP

EN

ER

GY

CO

ST

5%

AGEING

Conventional Pipe

■ AIRpipe fi ttings can be disconnected and reused

■ Quick drops can be added at anytime, adapting to changes in the production line

■ As the connections are made from the side, the risk of condensate waste is eradicated

■ Quick assembly; no welding, gluing or crimping needed

■ No detailed technical training required

■ Lightweight, easy to cut pipes: easy to handle on site

nee

dicated

SEAMLESS COMPATIBILITY

■ High quality, smooth inner surface will never rust. It ensures a constant

fl ow of clean compressed air and guarantees safety at the point of use

■ The high performance ‘O’ ring system ensures a leak free seal

■ Low friction inner surface eliminates airfl ow restriction, reducing pressure

drop and saving energy

www.airpipe-eu.com

Collars & sealing ring confi guration will vary depending on connection size.

Sizes 100-200mm will need to be preformed using a pipe lugging machine.

■ AIRpipe’s extensive range of pipe and fi ttings enables a bespoke

compressed air system to be built which can meet specifi c

production needs




[email protected]

DON’T MISS AMAZING OFFERS All offer prices are valid from 14th July until 31st August 2014. Prices exclude VAT. JULY/AUGUSTPressure Washers


70 bar0363

BY01-HBE-70 70 6.5 1.5 87.30


Tech Sheet 10226

90 bar0363

BY01-VBS-90 90 7.0 1.9 124.28


Tech Sheet 10227

110 bar0363

HPI1860-110BAR 110 7.5 2 159.68

Spare Components

To suit BY01-HBE & VBS0363

BY01-HPG15 Gun Extension & Nozzle 13.33

To suit HPI18600363

HPI1860-HPG01 Gun & Nozzle 13.50HPI1860-TURBO Turbo Nozzle 4.23HPI1860-HOSE 8 Metre Hose Assembly 13.43

• 1500W• Rated Pressure 70 bar• Max Pressure 105 bar

• Portable upright style, one piece machine with handle

• 1900W• Rated Pressure 90 bar

• Max Pressure 135 bar

• 2000W• Rated Pressure 110 bar• Max Pressure 165 bar

• Portable upright style, one piece machine with handle

Tech Sheet 10225

See pages 1258 & 1259

HPI1860-HOSE HPI1860-TURBO

HPI1860-HPG01

FloorScrubber

Extension

SoapDispenser

Turbo Nozzle

Variable Fan Nozzle Angled Nozzle

Brush

Smart Gun

FloorScrubber

Extension

SoapDispenser

Turbo Nozzle

Variable Fan Nozzle Angled Nozzle

Brush

Smart Gun

Turbo Nozzle

Variable Fan Nozzle

Smart Gun




[email protected]


Yellow Hand Cleaner

Yellow Hand Cleaner0229

6330271070 2.8 17.80

AmbersilWipes

High Absorbency Cleaning Wipes0229

6330272030 30 2.006330272100 100 20.74

40+

Multi-purpose, Industrial Protective Lubricant0229

6130007000 400ml 3.96

AMS4

Multi-purposeSilicone Grease0229

6130008500 400 10.28

PenetratingOil

Penetrant for Seized Parts0229

6150003600 400 5.66

Rust Flash

Rust Loosener with Freeze Shock Effect0229

6150003601 500 5.22

Chainspray& FLT Chain Spray

Chain and Drive Lubricant0229

6170030010 500 4.64

SiliconeAnti-stick

Concentrated Silicone Lubricant0229

6140001500 400 11.78

Tufcut

Metal Cutting Lubricant0229

6150006000 350ml Liquid 11.926150005500 400ml Spray 10.86

Multi-lube

Multi-Purpose Lubricant0229

6170030020 500 3.76

White Spray Grease

Multi-Purpose White Grease0229

6170030040 500 5.68

CopperAnti-seize

High Temperature Anti-seize0229

6190014010 400ml 7.04

Paint & Surface Preparation, Lubrication & Cleaning

AquaTemporary MarkingPaints

0229

32055-AA 500 Fluorescent Red 8.8332051-AA 500 Fluorescent Yellow 8.8332053-AA 500 Fluorescent Orange 8.8332054-AA 500 Fluorescent Green 8.8332052-AA 500 Fluorescent Blue 8.8332050-AA 500 White 8.83

See pages 1201 & 1211




[email protected]


PNEUMATIC POWER TOOLS

Ratchet Wrench Tech Sheet 10236

1/2” Square Drive0373

AP17411-1/2 29.33

3/8” Square Drive 0373

AP17411-3/8 29.33

Air Impact Wrench Tech Sheet 10235


AP7451 60.74

Tech Sheet 10237


AP7460 116.01

Pistol Grip Reversible Drill Tech Sheet 10240

3/8” Keyed Chuck0373

AP17101 25.84

Tech Sheet 10241


AP17107 29.89



Order 5 or more items from these ranges before 31st August to take advantage of this fantastic SALE OR RETURN OFFER**Any returns will be accepted up to 30th September 2014. Goods must be in a re-saleable condition & packaging undamaged




[email protected]


Straight Grip Reversible Drill Tech Sheet 10239


AP17111 23.69

Air Impact Hammer Tech Sheet 10242

Heavy Duty0373

AP17621 13.71

Die Grinder Tech Sheet 10243

Straight, 1/4”0373

AP17313 12.80

Tech Sheet 10244

Angled, 1/4”0373

AP17315 23.51

4” Angle Grinder Tech Sheet 10245

Heavy Duty0373

AP7319 27.64

Basic Air Tool Kit

5 Piece Set0373

AP8031K5G 21.00

Tool Holders

Multi-Magnetic Tool Holder0373

LMH-01 Magnetic Power: 10kg 15.96

Long Magnetic Tool Holder0373

LMH12 12” 7.40LMH24 24” 13.51

Magnetic Tool Box0373

LMHB01 15.38

Multi-Magnetic Tool Holder0373

LMHY03 Magnetic Power: 8kg 15.24LMHY04 Magnetic Power: 10kg 20.00

See page 1326

See pages 1320-1325

PLEASE NOTE: All special prices will only apply where the specifi ed order quantities shown, are ordered. Detailed Technical information for these products can be found within our catalogue or online16


[email protected]


SEE PAGE 1089for Plastic Hose Reels

Mountable Steel Air Hose Reel


Tech Sheet 10183

Rubber Air Hose, Spring Rewind, 3/8”0800

SAHR-15-38 15m, 3/8” Rubber Air Hose, 3/8” BSPT Connections 173.36SAHR-15N-38 No Hose, Capacity 15m, 3/8” Rubber Hose 157.60

Tech Sheet 10185

Rubber Air Hose, Spring Rewind, 1/2” 0800

SAHR-15-12 15m, 1/2” Rubber Air Hose, 1/2” BSPT Connections 256.60SAHR-15N-12 No Hose, Capacity 15m 1/2” Rubber Hose 203.64

Tech Sheet 10195

Spring Rewind, 3/4”0800

SAHR-40N-34 No Hose, Capacity 40m, 3/4” Rubber Hose 559.48

Mountable High Pressure Water Steel Hose Reels


Tech Sheet 10189

Black 1 Wire Pressure Wash, Spring Rewind, 3/8”0800

SWHR-15-38 15m, 3/8” 1 Wire, 3/8” BSP Inlet - M22 x 1.5 outlet 303.12SWHR-15N-38 No Hose, Capacity 15m 3/8” 1 Wire 247.48


Tech Sheet 10192

Black 2 Wire Pressure Wash, Manual Rewind, 3/8”0800

SWHR-30-38 30m, 3/8” 2 Wire, M22 x 1.5 Connections 328.28

Hose Reels See pages 1088-1094



Order 5 or more items from these ranges before 31st August to take advantage of this fantastic SALE OR RETURN OFFER**Any returns will be accepted up to 30th September 2014. Goods must be in a re-saleable condition & packaging undamaged

Documents

Air systems july flyer