2
ISO9001:2015 CERTIFIED © 2019 Automann Web: www.automann.com Customer Service 1.888.AUTOMANN (288.6626) Fax: 1.866.AUTOMANN (288.6626) E-mail: [email protected] 2019 Any reference to OEM/aftermarket names or product identification numbers/descriptions/model numbers is for identification only and does not indicate the product origin. When ordering, customers have the option to order using industry references, OEM references or Automann references. AIR DISC BRAKE MATERIAL SPECIFICATIONS AUTOMANN “FS” AIR DISC BRAKE MATERIAL Bulletin# 012319 DATE: 01-23-19 © Copyright 2019 ¢ Automann “FS” (fleet standard) air disc brake pads are formulated for typical line haul service and can be used on vehicles in combination with 20,000-lb or 23,000-lb rated drum brake materials. ¢ The back plates are blanked from a high grade of hot-rolled, pickled and oiled steel to resist corrosion. ¢ The pad retention system is the long-time proven mechanical attachment method of wire mesh welded to the steel back plate combined with a special, high strength under layer to insure a secure bond for the life of the pad. ¢ The friction material itself is integrally molded to the under layer. ¢ The “FS” formulation has a long history of use in Europe and has been ECE R-90 performance certified. This material offers consistent service and good wear characteristics. ¢ Each axle set of disc brake pads comes packaged with the hardware needed to complete a first class brake job. Parameter Specification Test Method Specific Gravity 2.30 – 2.70 SAE J380 and IS 2742:1994 PART 3 – 5.1 Rockwell Hardness L Scale 60 – 110 IS 2742:1994 PART 3 – 5.2 & ISO 2039 – 2:1987 (E) Cold Bond Shear 40 Kgf/cm² Min ISO 6312 Hot Bond Shear @ 300°C 30 Kgf/cm² Min ISO 6312 Cold Compressibility Deflection 2% Max ISO 6310 Hot Compressibility @ 400°C Deflection 5% Max ISO 6310 Swell 0.10 mm Max 0.10 mm Max SAE J160, Method A (Hot Plate Method) SAE J160, Method B (Oven Method) Growth 0.10 mm Max 0.10 mm Max SAE J160, Method A (Hot Plate Method) SAE J160, Method B (Oven Method) Acetone Extraction 1.50% Max ASTM D494 – 11 Loss On Ignition 25.00% Max IS 2742:1994 PART 3 – 5.7 pH >9.00 JASO C458-86 Corrosion Resistance No corrosion between pad and back plate ISO 6314 Chase Test Normal μ F (0.35 – 0.45) SAE J661:2012 Chase Test Hot μ F (0.35 – 0.45) SAE J661:2012

air Disc PaDs AIR DISC BRAKE MATERIAL SPECIFICATIONS Air ... · Air Disc Brake Material Specifications ¢ Automann “FS” (fleet standard) air disc brake pads are formulated for

  • Upload
    others

  • View
    28

  • Download
    0

Embed Size (px)

Citation preview

ISO9001:2015CERTIFIED

© 2019 Automann

Web: www.automann.com • Customer Service 1.888.AUTOMANN (288.6626) • Fax: 1.866.AUTOMANN (288.6626) • E-mail: [email protected]

2019

Any reference to OEM/aftermarket names or product identification numbers/descriptions/model numbers is for identification only and does not indicate the product origin. When ordering, customers have the option to order using industry references, OEM references or Automann references.

AIR DISC BRAKE MATERIAL SPECIFICATIONSAUTOMANN “FS” AIR DISC BRAKE MATERIAL

Bulletin# 012319 DATE: 01-23-19 © Copyright 2019

05-38

© 2017 Automann

Any reference to OEM/aftermarket names or product identification numbers/descriptions/model numbers is for identification only and does not indicate the product origin. When ordering, customers have the option to order using industry references, OEM references or Automann references.

air Disc PaDsAir Disc Brake Material Specifications

¢ Automann “FS” (fleet standard) air disc brake pads are formulated for typical line haul service and can be used on vehicles in combination with 20,000-lb or 23,000-lb rated drum brake materials.

¢ The back plates are blanked from a high grade of hot-rolled, pickled and oiled steel to resist corrosion.

¢ The pad retention system is the long-time proven mechanical attachment method of wire mesh welded to the steel back plate combined with a special, high strength under layer to insure a secure bond for the life of the pad.

¢ The friction material itself is integrally molded to the under layer.

¢ The “FS” formulation has a long history of use in Europe and has been ECE R-90 performance certified. This material offers consistent service and good wear characteristics.

¢ Each axle set of disc brake pads comes packaged with the hardware needed to complete a first class brake job.

Automann “Fs” Air Disc Brake material

Parameter Specification test method

specific Gravity 2.30 – 2.70 SAE J380 and IS 2742:1994 PART 3 – 5.1

rockwell Hardness L Scale 60 – 110 IS 2742:1994 PART 3 – 5.2 &ISO 2039 – 2:1987 (E)

cold Bond shear 40 Kgf/cm² Min ISO 6312

Hot Bond shear @ 300°c 30 Kgf/cm² Min ISO 6312

cold compressibility Deflection 2% Max ISO 6310

Hot compressibility @ 400°c Deflection 5% Max ISO 6310

swell 0.10 mm Max0.10 mm Max

SAE J160, Method A (Hot Plate Method)SAE J160, Method B (Oven Method)

Growth 0.10 mm Max0.10 mm Max

SAE J160, Method A (Hot Plate Method)SAE J160, Method B (Oven Method)

Acetone Extraction 1.50% Max ASTM D494 – 11

Loss On ignition 25.00% Max IS 2742:1994 PART 3 – 5.7

pH >9.00 JASO C458-86

corrosion resistance No corrosion betweenpad and back plate

ISO 6314

chase Test Normal μ F (0.35 – 0.45) SAE J661:2012

chase Test Hot μ F (0.35 – 0.45) SAE J661:2012

Air

Dis

c

ISO9001:2015CERTIFIED

© 2019 Automann

Web: www.automann.com • Customer Service 1.888.AUTOMANN (288.6626) • Fax: 1.866.AUTOMANN (288.6626) • E-mail: [email protected]

2019

Any reference to OEM/aftermarket names or product identification numbers/descriptions/model numbers is for identification only and does not indicate the product origin. When ordering, customers have the option to order using industry references, OEM references or Automann references.

AIR DISC BRAKE MATERIAL SPECIFICATIONSAUTOMANN “SD” AIR DISC BRAKE MATERIAL

Bulletin# 012319 DATE: 01-23-19 © Copyright 2019

05-39© 2017 Automann

Any reference to OEM/aftermarket names or product identification numbers/descriptions/model numbers is for identification only and does not indicate the product origin. When ordering, customers have the option to order using industry references, OEM references or Automann references.

air Disc PaDsAir Disc Brake Material Specifications

¢ Automann “SD” (severe duty) air disc brake pads are formulated for demanding service and can be used on vehicles in combination with 20,000-lb or 23,000-lb rated drum brake materials.

¢ The back plates are blanked from a high grade of hot-rolled, pickled and oiled steel to resist corrosion.

¢ The pad retention system is the long-time proven mechanical attachment method of wire mesh welded to the steel back plate combined with a special, high strength under layer to insure a secure bond for the life of the pad.

¢ The friction material itself is integrally molded to the under layer.

¢ The “SD” formulation has a long history of use in Europe and has been ECE R-90 performance certified. This material offers consistent service in demanding applications and good wear characteristics.

¢ Each axle set of disc brake pads comes packaged with the hardware needed to complete a first class brake job.

Automann “sD” Air Disc Brake material

Parameter Specification test method

specific Gravity 2.40 – 2.70 SAE J380 and IS 2742:1994 PART 3 – 5.1

rockwell Hardness L Scale 70 – 120 IS 2742:1994 PART 3 – 5.2 & ISO 2039 – 2:1987 (E)

cold Bond shear 40 Kgf/cm² Min ISO 6312

Hot Bond shear @ 300°c 30 Kgf/cm² Min ISO 6312

cold compressibility Deflection 2% Max ISO 6310

Hot compressibility @ 400°c Deflection 5% Max ISO 6310

swell 0.10 mm Max0.10 mm Max

SAE J160, Method A (Hot Plate Method)SAE J160, Method B (Oven Method)

Growth 0.10 mm Max0.10 mm Max

SAE J160, Method A (Hot Plate Method)SAE J160, Method B (Oven Method)

Acetone Extraction 2.00% Max ASTM D494 – 11

Loss On ignition 35.00% Max IS 2742:1994 PART 3 – 5.7

pH >9.00 JASO C458-86

corrosion resistance No corrosion betweenpad and back plate

ISO 6314

chase Test Normal μ G (0.45 – 0.55) SAE J661:2012

chase Test Hot μ G (0.45 – 0.55) SAE J661:2012

Air

Dis

c

05-39© 2017 Automann

Any reference to OEM/aftermarket names or product identification numbers/descriptions/model numbers is for identification only and does not indicate the product origin. When ordering, customers have the option to order using industry references, OEM references or Automann references.

air Disc PaDsAir Disc Brake Material Specifications

¢ Automann “SD” (severe duty) air disc brake pads are formulated for demanding service and can be used on vehicles in combination with 20,000-lb or 23,000-lb rated drum brake materials.

¢ The back plates are blanked from a high grade of hot-rolled, pickled and oiled steel to resist corrosion.

¢ The pad retention system is the long-time proven mechanical attachment method of wire mesh welded to the steel back plate combined with a special, high strength under layer to insure a secure bond for the life of the pad.

¢ The friction material itself is integrally molded to the under layer.

¢ The “SD” formulation has a long history of use in Europe and has been ECE R-90 performance certified. This material offers consistent service in demanding applications and good wear characteristics.

¢ Each axle set of disc brake pads comes packaged with the hardware needed to complete a first class brake job.

Automann “sD” Air Disc Brake material

Parameter Specification test method

specific Gravity 2.40 – 2.70 SAE J380 and IS 2742:1994 PART 3 – 5.1

rockwell Hardness L Scale 70 – 120 IS 2742:1994 PART 3 – 5.2 & ISO 2039 – 2:1987 (E)

cold Bond shear 40 Kgf/cm² Min ISO 6312

Hot Bond shear @ 300°c 30 Kgf/cm² Min ISO 6312

cold compressibility Deflection 2% Max ISO 6310

Hot compressibility @ 400°c Deflection 5% Max ISO 6310

swell 0.10 mm Max0.10 mm Max

SAE J160, Method A (Hot Plate Method)SAE J160, Method B (Oven Method)

Growth 0.10 mm Max0.10 mm Max

SAE J160, Method A (Hot Plate Method)SAE J160, Method B (Oven Method)

Acetone Extraction 2.00% Max ASTM D494 – 11

Loss On ignition 35.00% Max IS 2742:1994 PART 3 – 5.7

pH >9.00 JASO C458-86

corrosion resistance No corrosion betweenpad and back plate

ISO 6314

chase Test Normal μ G (0.45 – 0.55) SAE J661:2012

chase Test Hot μ G (0.45 – 0.55) SAE J661:2012

Air

Dis

c