1
PREPARATION BEFORE INSTALLATION ADJUSTING THE POSITION OF INSTALLATION FOR INDOOR UNIT 4 INSTALLING THE WIDE PANEL AIR CONDITIONER OPTIONAL PARTS Wide panel INSTALLATION MANUAL PART No. 9378869042 For authorized service personnel only. WARNING CAUTION PARTS AND ACCESSORIES The following installation parts are furnished. Check them before starting installation work. Name and Shape Screw (small) Screw (White) (large) Q’ty 20 8 Name and Shape Wide panel Installation manual (This manual) Q’ty 1 4 INSTALLING CASSETTE GRILLE AND WIDE PANEL TO INDOOR UNIT CAUTION 1 2 3 1 Align the stamped marks on the decoration panel a- gainst the pipe and the drain of the indoor unit. 2 3 Condensation Air leakage Dirty ceiling Condensation, dew drops Indoor unit Decoration panel Wide panel Ceiling No gap between ceiling and wide panel around entire periphery (1) Assemble the Wide panel • Tighten the screws at 4 locations. Completed diagram (2) Secure the Wide panel to the Decoration panel • Tighten the screws at 16 locations. Screw(short) Screw hole x 8 Unit: mm (in.) Center line 1 3 2 Screw(long) x 8 Indoor unit Wide panel Decoration panel Screw(short) x 16 Hexagon screw x 4 (Decoration panel accessory) No Gap Wide panel installation dimension Ceiling A Indoor unit Ceiling The size of the ceiling opening must be 1180mm (46-7/16 in.) or smaller. There should not be any foreign objects within 1260mm (49-5/8 in.) of the Wide panel installation area of the ceiling. When it is difficult to tighten the screws due to soft ceiling materials such as plasterboard, locally arrange anchoring parts. Tighten the screws on the wide panel as shown in the diagram below. Adjust the height of installation for the indoor unit as shown in the diagram below. 1200 (47-1/4) 1260 (49-5/8) (0.039 to 0.118) 1 to 3 Unit: mm (in.) Tighten the screw until the seal material between the decoration panel and the main indoor unit is compressed to a thickness 5-7 mm (0.197 - 0.276 in.). Screw (long)×8 Tightening torque 0.8 to 1.2 N•m (7.1 to 10.6 lbf•in.) (0.197 to 0.276 in.) 5 to 7 mm UTG-AKXA-W When installing the Wide panel, please refer to the operating manual and installation manual supplied with the indoor unit. The Wide panel is used by assembling it together with a Cassette type room air conditioner. The Wide panel cannot be used alone. Handle the Wide panel carefully. Dropping it onto the floor or subjecting it to strong shock will cause erroneous operation or accidents. Hand this manual to the customer to keep for future use, such as for maintenance or relocation of the air conditioner. Use only supplied screws to install the decoration panel. • Tighten the 4 Hexagon screws. Please refer to the installation manual of the indoor unit for details. Install so that there is no gap between the decora- tion panel and the main indoor unit. If there is a gap, an error will occur as shown in the diagram below. For more details, refer to the Cassette grille installa- tion manual. Ensure that there is no gap between the hook and the decoration panel (4 positions) Attach the decoration panel temporarily at 2 places with metal fittings. When there is a gap between the ceiling and the decoration panel even when the screw is tightened, readjust the height of the main indoor unit. As long as it does not affect the levelness of the main indoor unit and the drain piping, you may adjust the height of the main indoor unit from the hole at the corner of the decoration panel, with the decoration panel still attached to the main indoor unit. Before installation, be sure that all sources of power have been shut off. There is a danger of electric shock. When installing the Wide panel, please read this manual thoroughly. Type [Indoor unit height (mm (in.))] Slim type [246 (9-11/16)] 245 (9-10/16) Standard type [288 (11-5/16)] 287 (11-5/16) A (mm (in.)) Note: The illustrations in this manual may be different from the actual product.

AIR CONDITIONER PART No. 9378869042 1 2 3When installing the Wide panel, please read this manual thoroughly. Type [Indoor unit height (mm (in.))] Slim type [246 (9-11/16)] 245 (9-10/16)

  • Upload
    others

  • View
    0

  • Download
    0

Embed Size (px)

Citation preview

Page 1: AIR CONDITIONER PART No. 9378869042 1 2 3When installing the Wide panel, please read this manual thoroughly. Type [Indoor unit height (mm (in.))] Slim type [246 (9-11/16)] 245 (9-10/16)

PREPARATION BEFORE INSTALLATION

ADJUSTING THE POSITION OF INSTALLATION FOR INDOOR UNIT

4

INSTALLING THE WIDE PANELAIR CONDITIONEROPTIONAL PARTSWide panelINSTALLATION MANUAL

PART No. 9378869042

For authorized service personnel only.

WARNING

CAUTION

PARTS AND ACCESSORIESThe following installation parts are furnished. Check them before starting installation work.

Name and ShapeScrew(small)

Screw (White)(large)

Q’ty

20

8

Name and Shape

Wide panel

Installation manual(This manual)

Q’ty

1

4

INSTALLING CASSETTE GRILLE AND WIDE PANEL TO INDOOR UNIT

CAUTION1

2

3

1

Align the stamped marks on the decoration panel a-gainst the pipe and the drain of the indoor unit.

2

3

Condensation

Air leakage

Dirty ceilingCondensation, dew drops Indoor unit

Decoration panel

Wide panel

Ceiling

No gap between ceiling andwide panel around entire periphery

(1) Assemble the Wide panel • Tighten the screws at 4 locations.

Completed diagram

(2) Secure the Wide panel to the Decoration panel • Tighten the screws at 16 locations.

Screw(short)

Screw hole x 8Unit: mm (in.)

Center line

1 32

Screw(long) x 8

Indoor unit

Wide panel

Decoration panel

Screw(short) x 16

Hexagon screw x 4(Decoration panel accessory)

No Gap

Wide panel installation dimension

Ceiling

A

Indoor unit

Ceiling

• The size of the ceiling opening must be 1180mm (46-7/16 in.) or smaller.

• There should not be any foreign objects within 1260mm (49-5/8 in.) of the Wide panel installation area of the ceiling.

• When it is difficult to tighten the screws due to soft ceiling materials such as plasterboard, locally arrange anchoring parts.

• Tighten the screws on the wide panel as shown in the diagram below.

Adjust the height of installation for the indoor unit as shown in the diagram below.

1200 (47-1/4)

1260 (49-5/8)

(0.0

39 to

0.1

18)

1 to

3

Unit: mm (in.)

Tighten the screw until the seal material between the decoration panel and the main indoor unit is compressed to a thickness 5-7 mm (0.197 - 0.276 in.).

Screw (long)×8 Tightening torque0.8 to 1.2 N•m (7.1 to 10.6 lbf•in.)

(0.19

7 to 0

.276 i

n.)5 t

o 7 m

m

UTG-AKXA-W

When installing the Wide panel, please refer to the operating manual and installation manual supplied with the indoor unit.

The Wide panel is used by assembling it together with a Cassette type room air conditioner. The Wide panel cannot be used alone.

Handle the Wide panel carefully. Dropping it onto the floor or subjecting it to strong shock will cause erroneous operation or accidents.

Hand this manual to the customer to keep for future use, such as for maintenance or relocation of the air conditioner.

Use only supplied screws to install the decoration panel.

• Tighten the 4 Hexagon screws.

Please refer to the installation manual of the indoor unit for details.

Install so that there is no gap between the decora-tion panel and the main indoor unit.If there is a gap, an error will occur as shown in the diagram below.

For more details, refer to the Cassette grille installa-tion manual.

Ensure that there is no gap between the hook and the decoration panel (4 positions)

Attach the decoration panel temporarily at 2 places with metal fittings.

When there is a gap between the ceiling and the decoration panel even when the screw is tightened, readjust the height of the main indoor unit.

As long as it does not affect the levelness of the main indoor unit and the drain piping, you may adjust the height of the main indoor unit from the hole at the corner of the decoration panel, with the decoration panel still attached to the main indoor unit.

Before installation, be sure that all sources of power have been shut off. There is a danger of electric shock.

When installing the Wide panel, please read this manual thoroughly.

Type [Indoor unit height (mm (in.))]Slim type [246 (9-11/16)] 245 (9-10/16)

Standard type [288 (11-5/16)] 287 (11-5/16)

A (mm (in.))

Note: The illustrations in this manual may be different from the actual product.

C

M

Y

CM

MY

CY

CMY

K

9378869042-01_IM_En_170118.pdf 1 2017/01/18 10:00:34