1

AINA SMALL TALK

EN

Visit www.ainaptt.com to find additionalsolutions and more user guides. If you have any further questions, you can also email us at:sales@ainaptt.com

Android - Version 1.4. Pairing Manual

2

PAIRING YOUR AINA DEVICE TO AINA SMALL TALK

If you have a PTT Smart Button, put it into pairing mode by pressing all three buttons simultaneously.

Constant green LED blinks signify that the PTT Voice Responder is in pairing mode.

1(1) Turn on your PTT Voice Responder by holding down the power button for 3 seconds. (2) Put your PTT Voice Responder into pairing mode by pressing both arrow buttons and both PTT buttons simultaneously until (3) the LED turns off momentarily, continued by constant green LED blinks.

1 2

3

3

2

3

Open AINA Small Talk to pair your AINA device.

Click on the red “+” icon to search for your device. Then, click on your PTT Voice Responder (or PTT Smart Button) to start the Bluetooth pairing process.

AINA Small Talk Settings

Click on to go to “Settings”.

Click on to go to “Settings”

Click on on “Device settings”.

Wait for your device to appear on the list (a friendly name is printed on the back of the Voice Responder) and then select it to start thepairing process.

1

1

2

4

4 Accept the Bluetooth pairing request.

You only need to pair your AINA device once. After the first pairing, your device will connect automatically to AINA Small Talk when turned on.

Your device has successfully paired when the connection icon turns green and when the Voice Responder’s LED blinks in blue.

5

ADDITIONAL FEATURES

1

2 3

Unpair/remove device.

Device details. Additional settings.

To unpair a device, press its name for 2 seconds in the menu.

Select your device from the list andthen click “CONFIGURE”to see its MACaddress, firmwareversion, battery leveletc.

Select at the topright corner of the screento access About, Settings and Stop service.

Accept the unpairing request.

connected connecting not connected

Connection icons

1 2

AboutSettingsStop devices

6

TROUBLESHOOTING

1

2

3

The connection process is taking too long or the connection icon is not turning from yellow to green.

The AINA device is not found.

The connection fails and you need to re-pair or re-connect the device.

If the connecting / reconnecting process seems to be taking a long time, we recommend pressing the AINA device’s PTT button once. If the connection symbol still stays yellow, tap the device on the list which you are trying to connect.

Make sure your device is on AINA mode, because the AINA Small Talk application only searches for devices that are in this mode and not JPTT or KPTT, for example.

If you need to re-pair or re-connect the device, you first need to put your AINA device intopairing mode and remove the previous Bluetooth pairing from the phone.

OR

If two methods above don’t work, we recommed pressing the on the top right corner and select “Stop service”. Then, restart the application to begin the pairing process again.