AHD WALLCAM DVRQUICK SETUP GUIDE

ONE STOP SHOP

Ozone Secutech Pvt. Ltd.H-40, Bali Nagar, New Delhi - 110015

Email : customercare@wallcam.inToll Free No. 1800 137 0030 I Website : www.ozonewallcam.com

Welcome Thank you for purchasing WallCam DVR! This manual is designed to be a reference tool for the installation and operation of our DVR. Before installation and operation please read the following safeguards and warnings carefully!

Note: This document contains preliminary information and subject to change without notice.

H.264 AHD WallCam DVR

Certification & Compliance:This equipment has been tested and found to comply with FCC, CE, RoHS and ISO standards.

WarningTo prevent fire or shock hazard, do not expose the unit to rain or moisture

CAUTION

RISK OF ELECTRIC SHOCKDO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).

THERE ARE NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONEEL.

This symbol alerts the user to the presence of non-insulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

This symbol alerts the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

1 PACKING DETAIL:- The content of the package include:

1 DVR - 1N2 Power adapter & cable - 1N3 Wireless Mouse - 1N4 Remote - 1N5 CD (USER Manual & Software) - 1N6 Caution Stickers - 2N

2 HDD installation:-

1. Remove the screws of both sides of the shell.

2. Extract the upper cover of the DVR.

3. Place the HDD inaccordance with the screw holes and connect HDD & mother board.

4. Fix the screws of the hard disk.

5. Close the DVR cover. 6. Put the screws on both sides of the shell.

HDDData Cable

HDDPower Cable

3 Front Panel:-

1 2 3 4

1 Infrared (IR) Becomes active while using remote.

Power indicator light2The red light will be ON when the power connection is ok.

3The red light will be ON when the DVRis connected to network.

Network status indicator light

4The red light will be ON when therecording is ON.

Recording indicator light

SN Indicator Function

1 2 3 4 5 6 8 9

7

1 VGA - Video Output portUser can connect to the monitor toview video output

2 Video IN BNC input ports for cameras.

3

4

5

6

7

8

9

RCA output for audio signal.Audio Out

HDMIHigh definition audio and video signaloutput port.

Audio INConnector for audio input devicessuch as microphone.

To use mouse or other backup devices.USB X 2

Network port.Rj45

Communication port or PTZ controller port.(available in select models)Rs485

Socket for a DC 12V input.Power

SN Name Description

4 Back Panel: 5 DVR Remote Featurea:

SN Name Function

Multi-window Button Enter into multi-window preview inerface1

Numeric Button Code input/number input/channel switch2

[ Esc ] Return to preview page3

Direction Button Direction and Keys4

ADD Input the number of DVR to control it

5

FN Assistant ButtonSwitch different setting page of main menu/enter thecorresponding secondary function of the main menu

6

Speed fast

7

Enter into video record control menu

8

9

Menu Button Open all menu in DVR

[ ]

I[ ]

I[ ]

I[ ]

Next

Previous

Step

[ ]

[ ]

[ ]

Play / PouseI/I

I/I Rew. Play / Pouse

10 -/-- Add Channel

11 Search

6 The Main features of DVR are:-

DescriptionFunction

Compression FormatH.264 High profile compression with low bit rate and better image quality.

Live SurveillanceSupport monitor, VGA and HDMI output.Display the local record state and basic information.

Smartphone ViewingSupport smartphone viewing by installingXVR or TOPSVIEW or FOSTON application on your mobile from Android/iOS app store.

Video Function

Adjustable video quality, record resolution &video frame rate. Support different record modes: Record when power on, Manual, Schedule, Motion Detection, Alarm, Timing etc.

Video Storage Support large capacity hard disk with SATA interface.

PlaybackSet recording search, recording play , video file storage Multi-mode playback mode.

BackupSupport Backup from DVR to USB, removable hard disk, DVD writer; and backup from network to hard disk.

AlarmAlarm activate video record, tour, message, buzzer, email, ftp function Support external alarm signal input (Available in select models).

Motion Support motion detection recording.

Mouse Operation Support Bluetooth & USB mouse operation.

PTZ configuration

Support RS485 decoder to control PTZ function. Support various PTZ protocols, remote PTZ control through internet.Support PTZ auto cruise tracks.

7 Starting the DVR:-

On DVR boot up, the user must login Enabling the systemwill provide the corresponding function according to the userauthority. There are 3 user settings: Admin, Guest and Default.The default password for Admin user is 'null' and the user cancreate guest user account as per requirement. To change your password or create new user go to main menu>>>>>system>>>account. For detailed information on using your DVR, go toguide in your main menu (right click>>>> Self-help).

Login Screen:

Quick setup menu: The following menu will appear on the screenon right click of the mouse.

When you select the ‘Main Menu’, the following screen will appear

SettingMenu

Main MenuMain menu contains all the settings such as record,alarm, motion detection, system, advanced, changepassword, information.

View 1 It allows to view one channel on a screen.

View 4 It allows to view four channel on a screen.

Self Help

Preview Signal To select channel specific or all technologies such asTVI, CVI, etc.

Output Adjust To adjust output screen.

Playback To see recording footage.

Record Mode

"There are 3 modes in the same i.e.1) Schedule : User can schedule recoding on hourly, daily, weekly or monthly basis.2) Manual : User can record everything for 24x7 by selecting this option.3) Stop : to stop recording"

Channel Type The user can select the combination of AHD & IPcameras.

Log Out The option includes logout, shutdown and reboot.

To access the quick shortcuts for network settings,system configuration and QR codes for mobileapplications.

8 Remote access (Mobile and Desktop):

There are two ways for live remote monitoring. 1. DDNS setup and2. Plug n Play cloud setup. In both options user can access the livefeed of the cameras from the DVR either through the web browserusing PC/Laptop or Android and iOS apps on smartphone.8.1 LAN Setup: Go to main menu>>>Network to access below screen.

• Customer has to click on DHCP menu for auto filling IP details or can enter the IP details manually as per network series of the user.

8.2 DDNS Setup(access on browser):(1) Go to router page of your Internet service provider (ISP) and activate port forwarding.(2) Register yourself at and choose your domain name.www.wallcam.in(3) Go to main menu>>>System settings>>>>Network>>>Net service and select DDNS. Choose WallCam from dropdown. Mark on Enable. Put Domain name, user name and password which gets generated while registering on step 2.

4) Go to your browser and enter domain name which is created in step 2 of 8.2.5) Enter your user id and password to access live feed of your cameras..8.3 Plug n Play Could Setup(access on browser):a) Go to main menu>>>Info >>>>Version.b) Check the net status (it should be ‘Connected’) and note down the serial number which is the cloud id. c) Go to www.daeye.net and click on by device.d) Enter Cloud id/DVR serial number, DVR user name and password to access live feed on your browser.

8.4 Central Monitoring System (CMS3.0) (a) Install CMS3.0 windows/macbook from the CD which is given in DVR box. After successful installation, below screen will appear.

(b) Go to deviceManage and click on Add button.(c) Enter device name and select model number Dev.TS.(d) Login type : there are 3 login types as mentioned in the screen shot.

(i) IP : works on local/static IP. 1. User needs to fill IP details in Domain/IP field. 2. Enter port no. 34567 in device port field.

3. Put DVR user name and password. 4. Go to Monitor>>>>double click on root and you will find the device which is just added. 5. Double click on camera number to view the live feed of th at particular camera on your screen.(ii) Domain : works on DDNS server. 1. User needs to fill domain name (created on step 2 of 8.2) in Domain /IP field. 2. Enter port no. 34567 in device port field. 3. Put DVR user name and password. 4. Go to Monitor>>>>double click on root and you will find the device which is just added. 5. Double click on camera number to view the live feed of that particular camera on your screen.(iii) Cloud : works on Plug n Play cloud. 1. User needs to enter cloud ID in CloudID field. 2. Put DVR user name and password. 3. Go to Monitor>>>>double click on root and you will find the device which is just added. 4. Double click on camera number to view the live feed of that particular camera on your screen.

8.5 DVR access through Mobile application.For live feed of your wallcam on your mobile, you may download any ofthe following three apps on your smartphone (iOS and Android andfollow the following steps.): 1. Using Cloud (P2P): Install WallCam-AHD application on your Android phone and XVR application on your iOS phone.a. Go to Local Login and click on add device.b. Select GID in ‘Type’ field for Cloud hosting and put device name.c. Put DVR serial number/cloud ID in GID field.d. Enter DVR user name and password and enter number of channel as per DVR and click on start preview to view live feed.

2. Using DDNS : Install WallCam-AHD application on your Android phone and XVR application on your iOS phone. a. Go to Local Login and click on add device. b. Select IP in ‘Type’ field for DDNS hosting and put device name. c. Put domain name (which is created in step 2 of 8.2.)in ‘Address” field. d. Enter port 34600 (Default port). e. Enter DVR user name and password and enter number of channel as per DVR and click on start preview to view live feed.

Note:• For detailed operation introduction, please download detailed manual from our website www.ozonewallcam.com• All the designs, software and user interface are subject to change without prior written notice.• All trademarks and registered trademarks mentioned are the properties of their respective owners.• If there is any uncertainty or controversy, please refer to the final explanation of us• Please visit our website or contact your local service engineer for more information.• The user interface may change for different smart phone apps, the above is an illustration to configure one of the smart phone

All the features and specifications mentioned in this manual may vary model to model.*