Upload
letruc
View
214
Download
0
Embed Size (px)
Citation preview
2
CONTENTS
1. Product Features 3
2. Precautions 3
3. OSD Operations 4
4. Troubleshooting 9
5. E-waste 10
6. Warranty Card 12
3
Product Features
1. High definition; adopt latest Megapixel CMOS Sensor; horizontal resolution separately is 1 MP and 1.3 MP.
2. Day/Night mode: the sensor changes the day/night mode automatically to show qualified colour pictures during daytime and clear pictures at night.
3. OSD menu: set technical parameters by concise words.
4. Multi-function: BLC, WDR, DNR, Real-time Image Adjustment, Mirror Image,
Sharpness.
5. AHD/CVBS shift by OSD menu.
Precautions
1. Before attempting to operate this product, please read these instructions carefully.
2. The inner elements of the Camera are precise optic, electronic and mechanical parts, so wrong operations, such as heavy load and strong vibration should be avoided during transportation, safekeeping and installation. Otherwise, the product could be damaged. And please keep power off before installation.
3. Do abide by electrical safety standards, and use self-contained specialized power sources. The camera or video signal should be kept away from high voltage equipment or cable during transmission. Please take actions to prevent lightning strike and surge when necessary.
Use the recommended power. Make sure that the supply voltage and polarity (direct-current) are correct before power on.
5. Do not use corrosive cleanser for cleaning the appearance of camera or lens’ senor. It’s good for use customized lens paper or cotton buds with alcohol drenched to clean.
6. When the machine has broken down, please do not make any repairing operations unless you refer to instructions to detect faults first. If no reasons can be found, please ask professionals to conduct the maintenance work. And the professional maintenance persons should be authorized by our company.
4
OSD SETTINGS
OSD menu SUB MENU
Lens Manual DC
Exposure
Shutter AGC
Sens-up Brightness
D-WDR Defog
Backlight BLC
White Balance
Manual Outdoor Indoor AWC ATW AWB
Day/ night
Auto Ext
Black and white Colour
NR 2DNR 3DNR
Special
Camera title D-effect Motion Privacy
language Defect RS485
Adjust
Sharpness Monitor
LSC Video Out
Exit Save end,Reset,Not save
5
OSD SETTINGS
LENS-
Manual
DC Indoor (Iris speed)
Outdoor (Min shutter,Max shutter), (Iris speed) Iris Speed
MANUAL : The default setting is manual. If the installed lens is manual one,
please select this option.
DC : If the installed lens is manual one, please select this option. The
user can select the option by “RIGHT” or “LEFT”.
EXPOSURE-
Shutter AUTO,1/200,FLK,1/50,1/25 AGC Level (0-15)
Sens-up Auto, On and Off Brightness Level (0-100)
D-WDR ON (Level 0-8 )
OFF AUTO
Defog AUTO (Position/Size, Gradation, Default)
OFF
AGC : It increases amplifier gain in sensor. The setting value range of AGC is 15.
D-WDR : It is used to capture details in complex lighting conditions
BACKLIGHT-
BLC ON (Level,Area,Default)
HSBLC (Area,Display,Blackmask,Level,Mode and Default) OFF
6
Backlight compensation includes the following 3 options:
OFF : It means close the backlight compensation function. The default setting is OFF.
ON : It means open the backlight compensation function.;
HSBLC : It means shelter from the over brightness light, such as car license plate
recognition light.
WHITE BALANCE-
Manual (Blue,Red) Outdoor Indoor AWC ATW AWB
Its function is to control color reproduction.
DAY/NIGHT-
Auto
D-N (AGC)
D-N (Delay) N-D (AGC) N-D (Delay)
Ext D-N (Delay) N-D (Delay)
Black and white Burst, IR Smart, IR PWM
IR smart IR PWM
Colour
D-N AGC : It is the gain which takes place during the switching of day to night
condition and vice-versa for N-D AGC.
7
D-N DELAY: It is the time interval needed for the camera to switch from day to
night condition and vice-versa for N-D DELAY.
NOISE RATIO-
2DNR High,middle,low,off 3DNR High,middle,low,off
It reduces noise.
SPECIAL-
Camera title OFF ON
D-effect Freeze Mirror
Negative Image
Motion Off On (Area,Display,Sensitivity,Color,Trans,Alarm,Default)
Privacy Off On (Area,Display,Color,Trans,Default)
Language English
Defect
Live DPC On(AGC level,Level), Off white DPC On(Pos/Size,Start,DPC view,Level,AGC,Sen-
up),Off Black DPC On(Pos/Size,Start,DPC view,Level,AGC,Sen-
up),Off
RS485 Cam iD
ID display Baud rate
This option can be used for adding effects to the camera such as privacy masking, motion detection, negative image, mirror image.
8
ADJUST-
Sharpness Auto (Level,Start AGC,End AGC),Off
Monitor LCD (Gamma,Blue gain,Red gain) CRT (Black level,Blue gain,Red gain)
LSC On,OFF Video Out PAL/NTSC
This option is used to sharpen the image.
It also contains LCD and CRT option.
Need to adjust gamma, blue gain, red gain as per monitor characteristics for proper image reproduction.
EXIT-
Save end, Reset, Not save
It is used to save the settings.
It’s use to restore factory defaults. If parameter settings are disorder, please choose “CAMERA RESET”, and then press “ENTER”.
9
TROUBLESHOOTING
Item Problems Remedies
1 No picture or unstable Check the connection of video line or power line
2 The image is so blurred
Checking is there something dirt on the lens, then use customized lens paper or cotton buds with alcohol drenched to clean.
check the focus length and OSD settings
3 The image is so dim Adjust the CNT of monitor and iris.
4 No motion detection frame and privacy shaded frame
Check the option is ON or OFF. Or check the menu parameters
5 Screen color cast in the special environment
Adjust WEB mode or direction
6 The screen glittering The camera might face to the sun, TV set or
computer.
7 Functions are disorder and could not adjust
Restore default settings
8
The camera works abnormal; the surface over-heat; has peculiar smell, smoke etc.
Please cut off the power supply immediately. Secondly, check the connection of power supply. Then send the camera to professionals for maintenance.
10
INFORMATION ON E-WASTE HANDLING AND MANAGEMENT
Dear Customer,
The Ministry of Environment and Forests have published The Ewaste (Management and Handling ) Rules 2010 which comes in effect from 1st May 2012.
E-waste is defined as any electrical or electronic component of products in whole or in part, or rejects from their manufacturing or repair process which are intended to be discarded.
These rules apply to every producer, consumer or bulk consumer involved in the manufacture, sale, purchase and processing of electrical and electronic equipment or components as specified in Schedule 1 (please refer to our website www.godrej.com in the ‘Good & Green’ section of CSR module for more details).
Under these rules, specific roles and responsibilities are defined for producers , consumers and recyclers handling and managing ewaste.
E-waste is to be managed in an environmentally sound manner which means, taking steps to ensure that health and environment are protected from adverse effects of hazardous substance contained in such wastes.
Rule 6 of the Ewaste (Management and Handling) Rules 2010 states that bulk consumers of electrical and electronic equipment shall be responsible for recycling of the e-waste generated by them. Bulk consumer means bulk users of electronic and electrical equipment such as Central Government or State Government Departments, public sector undertakings, banks, educational institutions, multinational organizations, international agencies, private companies that are registered under the Factories act 1948 and Companies act 1956. The bulk consumers have to ensure that the e-waste generated by them is channelized to authorized collection centers or is taken back by the producers. They shall maintain records of ewaste generated by them in Form 2 and make such records available for scrutiny by the State pollution control or the Pollution control Committee concerned.
All consumers of electrical and electronic equipment irrespective of their status as bulk consumers or not , shall ensure that ewaste generated by them is channelized to authorized collection center(s) or registered dismantler(s), or recycler(s) or is returned to the pick-up/take back services provided by the producers. (Please
11
refer to our website www.godrej.com in the ‘Good & Green’ section of CSR module for more details).
All our products intended to be recycled under the category of ewaste (as defined above) carry a label or stamp of the WEEE symbol (A wheelie bin with a cross) , which states that it falls under the hazardous waste category and is not to be disposed along with normal garbage.
We seek your support in ensuring environmentally sound management of ewaste and aid us in sustaining our earth’s natural resources and maintaining the earth’s green cover intact for the benefit of our future generations.