AGRICULTURAL PRODUCTS JOHN DEERE HAY … · English and Spanish operator manual and bilingual decals. ... For 6000, 7000, and 8000 Series Tractors. 154.00 ... AGRICULTURAL PRODUCTS

61.6 In. (1565mm) Wide Up to72 In. (1829mm) Diameter BaleWeighing up to 2400 lb. (907kg)

Eight 7 In. (178mm) Wide,DiamondTough Triple Weave BeltsDiamond Tread Friction Surface Belts

Mato, Plate-Type Belt Splices

Premium MegaWidePlus Pickup78 In. (2.0 M), Inside87 In. (2.2 M), Flare to FlareChain DriveFour-Bar Pickup Reel (four left and four right),

120 TeethAdjustable Hay CompressorsAdjustable Height ControlSide Flare Crop GuidesLarger Cam and Cam BearingsLarger Spider Gears with Bearings

Pickup Gauge Wheels, Right and LeftAdjustable Roller BaffleAutomatic Cam Clutch Alert and Speed Compensation

Constant Velocity 540 RPM PTO TractorHookup - Free-Rotation, Lockback Collar,Cam Clutch Protected

Adjustable Hydraulic DensityControl with Pressure Gauge

Large Feed OpeningPowered Roundbar Starter RollStaggered Belt RollBearing ProtectorsElectric Twine Wrap-DoubleArm Adjustable, Self-Activated

Visual Twine Movement IndicatorAdjustable Twine GuidesEight Ball Twine Storage21.5L x 16.1, 10 PR Hi-Flotation TiresScrew-type JackMechanical Bale Diameter IndicatorGull Wing Composite DoorsHydraulic Gate LockoutFlashing Warning Lights with

Turning Signal10,000 lbs. (45 kN) Safety ChainHydraulic Pickup LiftVariable Core ValveFactory Installed Grease BankSurface Wrapping System

CoverEdge Surface Wrap with Twine SystemLESS ISO Bus display, display can be ordered(Less Mounting Brackets)Display Functions:

Gate Latched-ReadyBale Shape IndicatorsNear Full Size AlertFull Bale AlarmBale Full-Size Wrap StartedOversize Bale AlertGate Partially Open-StopDisplay Bale SizeOut of NetNet CutoffThird Bale Shape SensorSelection of Twine or NetOn Board DiagnosticsBale CounterLow Voltage IndicatorDisplay Error CodesBale Size Calibration

Controller Functions:Net or Twine ApplicationAuto Wrap CycleControl of Bale SizeControl of Twine Spacing/Net WrapsNumber of End WrapsEnd Wrap LocationControl of Soft Core

Balers equipped with Hydraulic Pickup Lift requiretractor with two SCV's.

CODEATTACHMENTIDENTIFIER DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

Select One Code From Each Required Category

BASE MACHINEEX-WORKS Ottumwa, Iowa

1945E 569 Premium Round Baler 57,036.00

DESTINATION

North America:0202 United States In Base Price

0184 Canada Same Price

AGRICULTURAL PRODUCTSJOHN DEERE HAY EQUIPMENT

569 Premium Round BalerEquipment for Base Machine

28 May 2013 US & Canada5-HAY & FORAGE- 1


SUGGESTEDLIST PRICE

USD ($)

DESTINATION ...Continued...

(Export) Australia:0230 Australia

A COMAR Net Charge for rust proofing will be added when this Code is ordered.Net Item Charge

(Export) Mexico:0195 Mexico


(Export) South America:0210 Argentina


0217 ParaguayA COMAR Net Charge for rust proofing will be added when this Code is ordered.

Net Item Charge

0220 UruguayA COMAR Net Charge for rust proofing will be added when this Code is ordered.

Net Item Charge

0213 ChileA COMAR Net Charge for rust proofing will be added when this Code is ordered.

Net Item Charge

0221 VenezuelaA COMAR Net Charge for rust proofing will be added when this Code is ordered.

Net Item Charge

LANGUAGE AND DECALS0409 English In Base Price

0443 English/Spanish (U.S. ONLY)English and Spanish operator manual and bilingual decals.

Same Price

0413 French (Canada ONLY)French operator manual and text free decals.

Same Price

0437 SpanishSpanish operator manual and text free decals.

Same Price

0430 PortuguesePortuguese operator manual and text free decals.

Same Price

0433 RussianRussian operator manual and text free decals.

Same Price

0448 English No TextEnglish operator manual and text free decals.

Same Price

PACKAGES


569 Premium Round BalerContinued



SUGGESTEDLIST PRICE

USD ($)

PACKAGES ...Continued...

540 RPM PTO, MegaWidePlus Pickup Packages0802 540 RPM PTO with Cam Clutch, 21.5 x 16.1 Tires, Premium MegaWidePlus Pickup, Bale

Push Bar and CoverEdge Surface Wrap with Twine1) 540 RPM PTO (Code 1010)2) 21.5L - 16.1 Tires3) Premium MegaWidePlus Pickup4) Bale Push Bar (Code 4000)5) CoverEdge Wrapping System with Twine (Code 5500)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration

0803 540 RPM PTO with Cam Clutch, 21.5 x 16.1 Tires, Premium MegaWidePlus Pickup, LESSBale Push Bar and CoverEdge Surface Wrap with Twine1) 540 RPM PTO (Code 1010)2) 21.5L - 16.1 Tires3) Premium MegaWidePlus Pickup4) LESS Bale Push Bar (Code 4095)5) CoverEdge Wrapping System with Twine (Code 5500)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration

1000 RPM PTO - 1 3/8 In., MegaWidePlus Pickup Packages0805 1000 RPM PTO - 1 3/8 In. with Cam Clutch, Premium MegaWide Plus Pickup, 21.5L x 16.1

In. Tires, Bale Push Bar, and CoverEdge Surface Wrap with Twine1) 1000 RPM PTO - 1 3/8 In. (Code 1020)2) 21.5L x 16.1 Tires3) Premium MegaWidePlus Pickup4) Bale Push Bar (Code 4000)5) CoverEdge Wrapping System with Twine (Code 5500)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration

0806 1000 RPM PTO - 1 3/8 In. with Cam Clutch, Premium MegaWide Plus Pickup, 21.5L x 16.1In. Tires, LESS Bale Push Bar, and CoverEdge Surface Wrap with Twine1) 1000 RPM PTO - 1 3/8 In. (Code 1020)2) 21.5L x 16.1 Tires3) Premium MegaWidePlus Pickup4) LESS Bale Push Bar (Code 4095)5) CoverEdge Wrapping System with Twine (Code 5500)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration



In Configuration


In Configuration





SUGGESTEDLIST PRICE

USD ($)


LESS Twine System, MegaWidePlus Pickup Packages0801 540 RPM PTO with Cam Clutch, Premium MegaWidePlus Pickup, 21.5L x 16.1 In. Tires,

Bale Push Bar and CoverEdge Surface Wrap LESS TWINE SYSTEM1) 540 RPM PTO (Code 1010)2) 21.5L - 16.1 Tires (Code 2030)3) MegaWidePlus Pickup (Code 3020)4) Bale Push Bar (Code 4000)5) CoverEdge Wrapping System LESS Twine (Code 5550)Codes will automatically be added along with the associated incremental pricing foreach. Twine Wrap System CANNOT be later field installed.

In Configuration

0804 1000 RPM PTO - 1 3/8 In. with Cam Clutch, Premium MegaWide Plus Pickup, 21.5L x 16.1In. Tires, Bale Push Bar, and CoverEdge Surface Wrap LESS TWINE SYSTEM1) 1000 RPM PTO - 1 3/8 In. (Code 1020)2) 21.5L x 16.1 Tires (Code 2030)3) MegaWidePlus Pickup (Code 3020)4) Bale Push Bar (Code 4000)5) CoverEdge Wrapping System LESS Twine(Code 5550)Codes will automatically be added along with the associated incremental pricing foreach. Twine Wrap System CANNOT be later field installed.

In Configuration

0807 1000 RPM PTO - 1 3/4 In. with Cam Clutch, Premium MegaWide Plus Pickup, 21.5L x 16.1In. Tires, Bale Push Bar, and CoverEdge Surface Wrap LESS TWINE SYSTEM1) 1000 RPM PTO - 1 3/4 In. (Code 1030)2) 21.5L x 16.1 Tires (Code 2030)3) MegaWidePlus Pickup (Code 3020)4) Bale Push Bar (Code 4000)5) CoverEdge Wrapping System LESS Twine (Code 5550)Codes will automatically be added along with the associated incremental pricing foreach. Twine Wrap System CANNOT be later field installed.

In Configuration

PTO HOOKUP1010 540 RPM PTO Hookup with Cam Clutch Same Price

1020 1-3/8 In. 1000 RPM PTO Hookup with Cam Clutch In Base Price

1030 1-3/4 In. 1000 RPM PTO Hookup with Cam Clutch 134.00

BALE EJECTION - FACTORY INSTALLED4000 Bale Push Bar 1,405.00

4095 Less Push Bar In Base Price

SURFACE WRAPPING SYSTEM - FACTORY INSTALLED5500 CoverEdge Surface Wrap In Base Price

5550 CoverEdge Surface Wrap Less Twine -1,340.00

SPECIAL EQUIPMENT - FACTORY INSTALLEDAttachments ordered from this section are factory installed.





SUGGESTEDLIST PRICE

USD ($)

SPECIAL EQUIPMENT - FACTORY INSTALLED ...Continued...

Tractor Baler Automation Activation:8748 Baler Automation Activation

1. For baler automation on 9 Series Premium Round Balers.2. Includes one, lifetime activation of baler for automation. Activation is non-transferrable, itstays with the baler.3. For 6030/7030 Premium MY10 and newer, 6R/7R MY11 and newer, ISO Bus ready tractorwith electronic SCV's.4. A seat switch and pushbar are required.5. A tractor and baler automation activation can be purchased later, please see AMS pricepages if ordered after the fact.6. SCV control available on all transmission types, SCV and vehicle speed control available onIVT transmissions ONLY.7. Tractor activation must be purchased through the AMS Price Pages.

399.00

ATTACHMENTS - ORDER AS DESIREDAttachments ordered from this section are NOT factory installed. Dealer installation isrequired.

Customer Gold Key Programs:9076 Gold Key Customer Experience Tour

This personal guided tour provides you with the unique opportunity to watch a similar machineto the one you are purchasing during its final stages of manufacturing. this tour will bescheduled in advance and can occur at your convenience during a 60 day window (30 daysprior to, or 30 days after your machine's expected warehouse date). For more information,visit www.deere.com/goldkey.

No Charge

Premium Baler Displays:9746 GreenStar 2 1800 Display

Does not include display harness (PF90687). Display shipped separately.1,850.00

9747 GreenStar 3 2630 DisplayDoes not include display harness (PF90687). Display shipped separately.

5,895.00

9748 ISOBUS Display Mounting BracketFor 30, 40, 50, 55, 60, or 70 Series Tractors.

154.00

9749 ISOBUS Display Mounting BracketFor 6000, 7000, and 8000 Series Tractors.

154.00

9750 Auxiliary ISOBUS HarnessFor 30, 40, 50, 55, 60, or 70 Series Tractors or competitive tractor models without a currentISOBUS wiring harness installed. Requires a 3 terminal convenience outlet.Includes battery (AFH205692) harness and cab harness (AF205697).Due to restricted functionality, harness is recommended for Premium Round Baler use ONLY.

110.00

9751 Auxiliary ISOBUS HarnessFor 6000, 7000, and 8000 Series Tractors without a current ISOBUS wiring harness installed.Requires a 3 terminal convenience outlet.Includes battery harness (AFH205691) and cab harness (AFH205697).Due to restricted functionality harness is recommended for Premium Round Baler Use.

110.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS - ORDER AS DESIRED ...Continued...

Forming Chamber:9008 High Moisture Kit - 5' Wide

Includes starter roll scraper knife and #13 roll scraper.709.00

9650 Side-Sheet Enhancement KitReplaceable wear liners made from abrasion resistant steel. Intended for highly abrasive cropssuch as corn stalks and peanut hay. Includes liners and attaching hardware. Can be used torepair balers with already worn side-sheets.

1,464.00

ALLIED SUPPLIER INFORMATIONFOR TWINE OR BALEBIND-XL, COVEREDGE SURFACE WRAP, ORZEBRA SURFACE WRAP CONTACT:AMBRACOP.O. Box 506Highway 61 & 155Dubuque, IA 52001Telephone: (800) 225-8946Fax: (563) 583-3531

FOR PLATE TYPE BELT FASTENER TOOLING, PORTABLE BELT CUTTER,OR PORTABLE BELT SPLICE TOOLING CONTACT:MATO Corporation124 Appalachian DriveBeckley, WV 25801Telephone: (800) 344-6286Fax: (304) 255-2501

FOR AUTOMATIC CHAIN OILER CONTACT:Suburban Machine & Manufacturing, Inc.301 Chelsea RoadMonticello, MN 55362Telephone: (800) 782-5752(763) 295-5635Fax: (763) 295-6601www.gosuburban.com

FOR BALER'S CHOICE PRESERVATIVE, PRESERVATIVE APPLICATOR,AND NET WRAP LIGHT KIT CONTACT:Harvest Tec, Inc.P.O. Box 63Hudson, WI 54016Telephone: (715) 386-9100Fax: (715) 386-9509

Refer to the Agricultural Sales Manual for additional information.

ATTACHMENTS FOR FIELD CONVERSIONAttachments ordered from this section are field installed. These Attachments are in addition tofactory installed options.

Bale Ejection:BE24128 Bale Push Bar 1,699.50





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...

Drivelines:BE32273 PTO Driveline, 1-3/4 In. 1000 RPM Telescoping Tractor Hookup with Cam Clutch

469, 569 Premium Baler Models.2,088.90

BE32287 PTO Driveline, 1-3/8 In. 1000 RPM Telescoping Tractor Hookup with Cam Clutch469, 569 Premium Baler Models.

1,934.90

BE32286 PTO Driveline, 540 RPM Telescoping Tractor Hookup with Cam Clutch469, 569 Premium Baler Models.

1,934.90

Electrical:RE17282 7-Terminal Electrical Outlet Socket

For tractor with no rear electrical outlet for implements.90.20

AE50549 Convenience Outlet (3-Pin)For tractor with no convenience outlet.

See Parts

AA37254 Harness, Convenience OutletFor adapting "5" and "6" Series monitors/displays/controllers with 3-Terminal femaleconnector to 2-Terminal female tractor convenience outlet.

See Parts

AE50531 Harness, Convenience OutletFor adapting "5" and "6" Series monitors/displays/controllers with 2-Terminal maleconnectors to 3-Terminal female tractor convenience outlet.

See Parts

Forming Chamber:BE32259 Auxiliary Take-up Roller 508.20

BE23829 High Moisture Kit - 5' WideIncludes starter roll scraper knife and #13 roll scraper.

779.90

BE32101 Side-Sheet Enhancement KitReplaceable wear liners made from abrasion resistant steel. Intended for highly abrasive cropssuch as corn stalks and peanut hay. Includes liners and attaching hardware. Can be used torepair balers with already worn side-sheets.

1,610.40

BE32443 Silage Special Kit - 5' WideIncludes staggerd belt roll auger kit and starter roll scaper knife. Recommended for balingsilage hay and very dry brittle crops.

1,760.00

Hitch and Drawbar:AL81724 Drawbar Drop-Down Kit

For 6000 Series John Deere Tractors - 3 In. Drop.449.90

RE63147 Drawbar Drop-Down KitFor 7000 Series John Deere Tractors - 2 In. Drop.Not compatible with Hi-Crop models.

310.20

BE32262 Rubber Drawbar Shield See Parts

BE24260 Safety Chain for Towed Equipment, 10,000 Lb. (45 kN) 40.70

BE24261 Safety Chain for Towed Equipment, 20,000 Lb (90 kN) 88.00





SUGGESTEDLIST PRICE

USD ($)


Hydraulics:SW700-1510 Fasse Hydraulic Multiplier Valve

1) For tractors with only 1 SCV.2) Includes ISO hydraulic couplers and switch box.3) For non ISO tractors, appropriate couplers will need to be ordered through Parts.

See Parts

AE52498 Hydraulic Pressure Reduction Kit for High Flow/High Pressure Tractors See Parts

Lighting:TY16055 Implement Warning Lights See Parts

Monitors/Displays/Controllers:BE24231 Mounting Brackets for Monitor/Display/Controller -

5020 Series IOOS TractorsFor mounting BaleTrak Pro monitor to 5020 Series Isolated Open Operator Station TractorsONLY.

113.30

Operator Environment:RE20352 Exterior Convex Rearview Mirror with Mounting Bracket for

John Deere Tractors with Sound-Gard BodySee Parts

TY15133 Fire Extinguisher Mounting BracketRequired to mount TY25183 Fire Extinguisher.Also order BE32293 - Mounting Support Bundle.

See Parts

TY25183 Fire Extinguisher, Water Type (U.S. and Canada) See Parts

Pickup:BE32310 Corn Cob Filler Plates

8 and 9 Series Models only with MegaWide Pickup with Roller Baffle. For improved tooth lifeand prevention of corn cobs lodging in pickup.

343.20

BE32257 Corn Stalk Compression Rack8 and 9 Series Models only with MegaWide Pickup with Roller Baffle. For improved capacityin chopped (fluffy) cornstalks.

570.90

Premium Baler Displays:BE32277 Auxiliary ISOBus Harness

For 30, 40, 50, 55, 60, or 70 Series Tractors or competitive tractor models without a currentISO Bus wiring harness installed. Requires a 3 terminal convenience outlet.Includes battery (AFH205692) harness and cab harness (AF205697).Due to restricted functionality, harness is recommended for Premium Round Baler use ONLY.

440.00

BE32278 Auxiliary ISOBus HarnessFor 6000, 7000, and 8000 Series Tractors without a current ISOBus wiring harness installed.Requires a 3 terminal convenience outlet.Includes battery harness (AFH205691) and cab harness (AFH205697).Due to restricted functionality harness is recommended for Premium Round Baler Use.

440.00







Regular Pickup:61.4 In. (1.6 M), Inside71 In. (1.8 M), Flare to FlareRoller Chain with V-Belt DriveFour-Bar Pickup Reel, 96 TeethAdjustable Contoured Hay CompressorsAdjustable Height ControlSide Flare Crop Guides

Constant Velocity 540 RPM PTO TractorHookup - Free-Rotation, Lockback Collar,Slip Clutch Protected



Visual Twine Movement IndicatorAdjustable Twine GuidesEight Ball Twine Storage14L x 16.1, 8PR Hi-Flotation TiresAdjustable Wheel SpindlesScrew-type JackMechanical Bale Diameter IndicatorHinged ShieldsHydraulic Gate LockoutFlashing Warning Lights withTurning Signal

10,000 lbs. (45 kN) Safety Chain

Bale-Trak Pro Monitor/Controller:

(Less Mounting Brackets)Monitor Functions:

Gate Latched-ReadyBale Shape IndicatorsNear Full Size AlertFull Bale AlarmBale Full-Size Wrap StartedOversize Bale AlertGate Partially Open-StopDisplay Bale SizeOut of NetNet CutoffSelection of Twine or NetOn Board DiagnosticsBale CounterLow Voltage IndicatorDisplay Error CodesBale Size CalibrationManual Actuator Movement with

Electronic BypassController Functions:

Net or Twine ApplicationAuto Wrap CycleControl of Bale SizeControl of Twine Spacing/Net WrapsNumber of End WrapsEnd Wrap LocationControl of Soft Core (Connects to

Tractor 3-Terminal Convenience Outlet)

For tractors not equipped with a ConvenienceOutlet, order AE50549, 3-Terminal ConvenienceOutlet Wiring Harness from Parts.



SUGGESTEDLIST PRICE

USD ($)



1940E 569 Round Baler 38,933.00

DESTINATION




569 Round BalerEquipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)








0212 BrazilA COMAR Net Charge for rust proofing will be added when this Code is ordered.

Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge

0185 Costa RicaA COMAR Net Charge for rust proofing will be added when this Code is ordered.

Net Item Charge

0191 GuatemalaA COMAR Net Charge for rust proofing will be added when this code is ordered.

Net Item Charge

0196 NicaraguaA COMAR Net Charge for rust proofing will be added when this code is ordered.

Net Item Charge

0197 PanamaA COMAR Net Charge for rust proofing will be added when this code is ordered.

Net Item Charge

0193 HondurasA COMAR Net Charge for rust proofing will be added when this code is ordered.

Net Item Charge


Net Item Charge

0214 ColombiaA COMAR Net Charge for rust proofing will be added when this Code is ordered.

Net Item Charge

0215 EcuadorA COMAR Net Charge for rust proofing will be added when this Code is ordered.

Net Item Charge

(Export) Eastern Europe:0096 Russia

Option Code includes a country specific Homologation Kit.A separate, additional COMAR NET ITEM CHARGE for rust proofing will be added when thisCode is ordered.

339.00


569 Round BalerContinued



SUGGESTEDLIST PRICE

USD ($)

DESTINATION ...Continued...0166 Ukraine


0081 KazakhstanOption Code includes a country specific Homologation Kit.A separate, additional COMAR NET ITEM CHARGE for rust proofing will be added when thisCode is ordered.

339.00

0125 BelarusOption Code includes a country specific Homologation Kit.A separate, additional COMAR NET ITEM CHARGE for rust proofing will be added when thisCode is ordered.

339.00



Same Price


Same Price


Same Price


Same Price


Same Price

0445 KazakhstanRussian operator manual and text free decals.

Same Price


Same Price

PACKAGES

540 RPM PTO, Regular Pickup Packages0802 540 RPM PTO with Slip Clutch, 14L x 16.1 Tires, Regular Pickup, Tires, Bale Push Bar, and

LESS CoverEdge Surface Wrap1) 540 RPM PTO (Code 1010)2) 14L x 16.1, 8PR H-Flo Tires (Code 2020)3) Regular Pickup (Code 3000)4) Bale Push Bar (Code 4000)5) LESS CoverEdge Wrapping System (Code 5595)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration





SUGGESTEDLIST PRICE

USD ($)


540 RPM PTO, MegaTooth Pickup Packages0804 540 RPM PTO with Slip Clutch, MegaTooth Pickup, 14L x 16.1 Tires, LESS Bale Push Bar,

and LESS CoverEdge Surface Wrap1) 540 RPM PTO (Code 1010)2) 14L x 16.1, 8PR Hi-Flo Tires (Code 2020)3) MegaTooth Pickup (Code 3010)4) LESS Bale Push Bar (Code 4095)5) LESS CoverEdge Wrapping System (Code 5595)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration

0805 540 RPM PTO with Slip Clutch, MegaTooth Pickup, 14L x 16.1 Tires, Bale Push Bar, andCoverEdge Surface Wrap with Twine1) 540 RPM PTO (Code 1010)2) 14L x 16.1, 8 PR Hi-Flo Tires (Code 2020)3) MegaTooth Pickup (Code 3010)4) Bale Push Bar (Code 4000)5) CoverEdge Wrapping System with Twine (Code 5500)Codes will be automatically added along with the associated incremental pricing for each.

In Configuration

540 RPM PTO, MegaWidePlus Pickup Packages0806 540 RPM PTO with Slip Clutch, MegaWidePlus Pickup, 14L x 16.1 Tires, LESS Bale Push

Bar, and LESS CoverEdge Surface Wrap1) 540 RPM PTO (Code 1010)2) 14L x 16.1, 8 PR Hi-Flo Tires (Code 2020)3) MegaWide Plus Pickup (Code 3020)4) LESS Bale Push Bar (Code 4095)5) LESS CoverEdge Wrapping System (Code 5595)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration

0807 540 RPM PTO with Slip Clutch, MegaWidePlus Pickup, 14L x 16.1 Tires, Bale Push Bar,and LESS CoverEdge Surface Wrap1) 540 RPM PTO (Code 1010)2) 14L x 16.1, 8 PR Hi-Flo Tires (Code 2020)3) MegaWide Plus Pickup (Code 3020)4) Bale Push Bar (Code 4000)5) LESS CoverEdge Wrapping System (Code 5595)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration

0808 540 RPM PTO with Slip Clutch, MegaWidePlus Pickup, 14L x 16.1 Tires, Bale Push Bar,and CoverEdge Surface Wrap with Twine1) 540 RPM PTO (Code 1010)2) 14L x 16.1, 8PR Hi-Flo Tires (Code 2020)3) MegaWide Plus Pickup (Code 3020)4) Bale Push Bar (Code 4000)5) CoverEdge Wrapping System (Code 5500)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration

0809 540 RPM PTO with Slip Clutch, MegaWidePlus Pickup, 21.5L x 16.1 In. Tires, Bale PushBar, and CoverEdge Surface Wrap with Twine1) 540 RPM PTO (Code 1010)2) 21.5L x 16.1 Tires (Code 2030)3) MegaWide Plus Pickup (Code 3020)4) Bale Push Bar (Code 4000)5) CoverEdge Wrapping System with Twine (Code 5500)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration





SUGGESTEDLIST PRICE

USD ($)

PACKAGES ...Continued...0822 540 RPM PTO with Slip Clutch, MegaWidePlus Pickup, 21.5L x 16.1 In. Tires,

CoverEdge Surface Wrap with Twine, and LESS Bale Push Bar1) 540 RPM PTO (Code 1010)2) 21.5L x 16.1 Tires (Code 2030)3) MegaWide Plus Pickup (Code 3020)4) LESS Bale Push Bar (Code 4095)5) CoverEdge Wrapping System with Twine (Code 5500)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration

0824 540 RPM PTO with Slip Clutch, MegaWidePlus Pickup, 14L x 16.1 Tires, CoverEdgeSurface Wrap with Twine, and LESS Bale Push Bar.1) 540 RPM PTO (Code 1010)2) 14L x 16.1, 8PR Hi-Flo Tires (Code 2020)3) MegaWidePlus Pickup (Code 3020)4) LESS Bale Push Bar (Code 4095)5) CoverEdge Wrapping System with Twine (Code 5500)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration

0825 540 RPM PTO with Slip Clutch, MegaWidePlus Pickup, 21.5L x 16.1 In. Tires,Bale Push Bar, and LESS CoverEdge Surface Wrap1) 540 RPM PTO (Code 1010)2) 21.5L x 16.1 Tires (Code 2030)3) MegaWidePlus Pickup (Code 3020)4) Bale Push Bar (Code 4000)5) LESS CoverEdge Wrapping System (Code 5595)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration

1000 RPM PTO - 1 3/8 In., MegaTooth Pickup Packages0814 1000 RPM PTO - 1 3/8 In., MegaTooth Pickup, 14L x 16.1 Tires, Bale Push Bar, and

CoverEdge Surface Wrap with Twine1) 1000 RPM PTO - 1 3/8 In. (Code 1020)2) 14L x 16.1, 8PR Hi-Flo Tires (Code 2020)3) MegaTooth Pickup (Code 3010)4) Bale Push Bar (Code 4000)5) CoverEdge Wrapping System with Twine(Code 5500)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration

1000 RPM PTO - 1 3/8 In., MegaWidePlus Pickup Packages0816 1000 RPM PTO - 1 3/8 In. with Slip Clutch, MegaWidePlus Pickup, 14L x 16.1 Tires, Bale

Push Bar, and CoverEdge Surface Wrap with Twine1) 1000 RPM PTO - 1 3/8 In. (Code 1020)2) 14L x 16.1, 8PR Hi-Flo Tires (Code 2020)3) MegaWidePlus Pickup (Code 3020)4) Bale Push Bar (Code 4000)5) CoverEdge Wrapping System with Twine (Code 5500)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration

0817 1000 RPM PTO - 1 3/8 In. with Slip Clutch, MegaWidePlus Pickup, 21.5L x 16.1 In. Tires,Bale Push Bar, and CoverEdge Surface Wrap with Twine1) 1000 RPM PTO - 1 3/8 In. (Code 1020)2) 21.5L x 16.1 tires (Code 2030)3) MegaWidePlus Pickup (Code 3020)4) Bale Push Bar (Code 4000)5) CoverEdge Wrapping System with Twine (Code 5500)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration





SUGGESTEDLIST PRICE

USD ($)

PACKAGES ...Continued...0818 1000 RPM PTO - 1 3/8 In. with Slip Clutch, MegaWidePlus Pickup, 21.5L x 16.1 In. Tires,

LESS Bale Push Bar, and LESS CoverEdge Surface Wrap1) 1000 RPM PTO - 1 3/8 In. (Code 1020)2) 21.5L - 16.1 tires (Code 2030)3) MegaWidePlus Pickup (Code 3020)4) LESS Bale Push Bar (Code 4095)5) LESS CoverEdge Wrapping System (Code 5595)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration

0819 1000 RPM PTO - 1 3/8 In. with Slip Clutch, MegaWidePlus Pickup, 14L x 16.1 Tires, BalePush Bar, and LESS CoverEdge Surface Wrap1) 1000 RPM PTO - 1 3/8 In. (Code 1020)2) 14L x 16.1, 8PR Hi-Flo Tires (Code 2020)3) MegaWidePlus Pickup (Code 3020)4) Bale Push Bar (Code 4000)5) LESS CoverEdge Wrapping System with Twine (Code 5595)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration

0820 1000 RPM PTO - 1 3/8 In. with Slip Clutch, MegaWidePlus Pickup, 21.5L x 16.1 In. Tires,Bale Push Bar, and LESS CoverEdge Surface Wrap1) 1000 RPM PTO - 1 3/8 In. (Code 1020)2) 21.5L x 16.1 tires (Code 2030)3) MegaWidePlus Pickup (Code 3020)4) Bale Push Bar (Code 4000)5) LESS CoverEdge Wrapping System (Code 5595)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration

0821 1000 RPM PTO - 1 3/8 In. with Slip Clutch, MegaWidePlus Pickup, 21.5L x 16.1 In. Tires,CoverEdge Surface Wrap with Twine and LESS Bale Push Bar1) 1000 RPM PTO - 1 3/8 In. (Code 1020)2) 21.5L x 16.1 tires (Code 2030)3) MegaWidePlus Pickup (Code 3020)4) LESS Bale Push Bar (Code 4095)5) CoverEdge Wrapping System (Code 5500)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration

1000 RPM PTO - 1 3/4 In., MegaWidePlus Pickup Packages0827 1000 RPM PTO - 1 3/4 In., MegaWidePlus Pickup, 21.5L x 16.1 In. Tires,

Bale Push Bar, and CoverEdge Surface Wrap with Twine1) 1000 RPM PTO - 1 3/4 In. (Code 1030)2) 21.5L x 16.1 Tires (Code 2030)3) MegaWidePlus Pickup (Code 3020)4) Bale Push Bar (Code 4000)5) CoverEdge Wrapping System with Twine (Code 5500)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration

LESS Twine System, MegaWidePlus Pickup Packages0830 540 RPM PTO with Slip Clutch, MegaWidePlus Pickup, 21.5L x 16.1 In. Tires, Bale Push

Bar, and CoverEdge Surface Wrap LESS TWINE SYSTEM1) 540 RPM PTO (Code 1010)2) 21.5L x 16.1 Tires (Code 2030)3) MegaWidePlus Pickup (Code 3020)4) Bale Push Bar (Code 4000)5) CoverEdge Wrapping System LESS Twine (Code 5550)Codes will automatically be added along with the associated incremental pricing foreach. Twine Wrap System CANNOT be later field installed.

In Configuration





SUGGESTEDLIST PRICE

USD ($)

PACKAGES ...Continued...0831 1000 RPM PTO - 1 3/8 In. with Slip Clutch, MegaWidePlus Pickup, 21.5L x 16.1 In. Tires,

Bale Push Bar, and CoverEdge Surface Wrap LESS TWINE SYSTEM1) 1000 1 3/8 In. RPM PTO (Code 1020)2) 21.5L x 16.1 Tires (Code 2030)3) MegaWidePlus Pickup (Code 3020)4) Bale Push Bar (Code 4000)5) CoverEdge Wrapping System LESS Twine (Code 5550)Codes will automatically be added along with the associated incremental pricing foreach. Twine Wrap System CANNOT be later field installed.

In Configuration

0832 1000 RPM PTO - 1 3/4 In. with Slip Clutch, MegaWidePlus Pickup, 21.5L x 16.1 In. Tires,Bale Push Bar, and CoverEdge Surface Wrap LESS TWINE SYSTEM1) 1000 1 3/4 In. RPM PTO (Code 1030)2) 21.5L x 16.1 Tires (Code 2030)3) MegaWidePlus Pickup (Code 3020)4) Bale Push Bar (Code 4000)5) CoverEdge Wrapping System LESS Twine (Code 5550)Codes will automatically be added along with the associated incremental pricing foreach. Twine Wrap System CANNOT be later field installed.

In Configuration

PTO HOOKUP1010 540 RPM PTO Hookup with Slip Clutch In Base Price

1020 1-3/8 In. 1000 RPM PTO Hookup with Slip Clutch Same Price

1030 1-3/4 In. 1000 RPM PTO Hookup with Slip Clutch 134.00

TIRES2020 14L x 16.1, 8PR Hi-Flo Tires In Base Price

2030 21.5L-16.1 In. Hi-Flotation Tires 1,518.00

PICKUPS - FACTORY INSTALLED3000 Regular Pickup

Includes Gate Crop Deflector when ordered WITH CoverEdge Surface Wrap (Code 5500). SeeGate Crop Deflector Kit (BE31105) in 'Attachments for Field Conversion' section for ordersLESS CoverEdge Surface Wrap (Code 5595).

In Base Price

3010 MegaTooth Pickup with Slip Clutch Alert and CompensationIncludes- Pickup Gauge Wheels, Right and Left- Gate Crop Deflector when ordered WITH CoverEdge Surface Wrap (Code 5500). See GateCrop Deflector Kit (BE31105) in 'Attachments for Field Conversion' section for orders LESSCoverEdge Surface Wrap (Code 5595).

2,240.00

3020 MegaWidePlus Pickup with Slip Clutch Alert and CompensationIncludes Pickup Gauge Wheels, Right and Left.

4,205.00



SURFACE WRAPPING SYSTEM - FACTORY INSTALLED





SUGGESTEDLIST PRICE

USD ($)

SURFACE WRAPPING SYSTEM - FACTORY INSTALLED...Continued...

5500 CoverEdge Surface Wrap 6,194.00

5595 Less CoverEdge Surface Wrap In Base Price

5550 CoverEdge Surface Wrap Less Twine 4,854.00


Hydraulic Pickup Lift:8100 Hydraulic Pickup Lift with Down Stop

Balers with MegaWidePlus Pickup ONLY.Requires tractor equipped with two Selective Control Valve Functions.Balers with Regular Pickup ONLY.Requires tractor equipped with two Selective Control Valve Functions.

485.00




No Charge

Density Control:9014 Variable Core Valve

For 466, 566, 467, 567, 468, 568, 469 and 569 Models.388.00




1,464.00

Monitors/Displays/Controllers:9011 Mounting Brackets for Monitor/Display/Controller -

5020, 5025, 6000, 7000, or 8000 Series Cab TractorsFor mounting BaleTrak Pro monitor to 5020, 5025, 6000, 6005, 6010, 6015, 6020, 7000, 7010,7020, or 8000 Series Cab Tractors.

71.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS - ORDER AS DESIRED ...Continued...9012 Mounting Brackets for Monitor/Display Controller -

John Deere Sound-Gard Body Cab TractorsFor mounting BaleTrak Pro monitor to John Deere tractors with Sound-Gard Body cab.

71.00

Pickup:9002 Gathering Wheels

Balers with Regular and MegaTooth Pickup ONLY.1,555.00

9004 Pickup Gauge Wheels, Right and LeftBalers with Regular Pickup ONLY.

555.00












SUGGESTEDLIST PRICE

USD ($)


Density Control:BE23827 Variable Core Valve

For 466, 566, 467, 567, 468, 568, 469 and 569 Models.426.80

Driveline Conversions - To 1000 RPM from 540 RPM:See Service Parts to confirm application. In case of conflicting information, Service Partsinformation supersedes that below.

E82511 Decal, Warning 1000 RPM See Parts

AE73355 Front Yoke and Lockback Collar, 1-3/4 In. 1000 RPM See Parts


AE54323 Output Shaft, 1000 RPM See Parts

AE73352 PTO Driveline, Front Half with Lockback Collar, 1-3/4 In. 1000 RPM See Parts



E96695 Slip Clutch Disk Spring, 1000 RPM See Parts


A54618 Decal, Warning 540 RPM See Parts


AE59637 Front Yoke with Lockback Collar, 540 RPM See Parts



AE73356 PTO Driveline, Front Half with Lockback Collar, 540 RPM See Parts



Drivelines:BE32272 PTO Driveline, 1-3/4 In. 1000 RPM Telescoping Tractor Hookup with Slip Clutch

ONLY for 569 Round Baler and 569 Sllage Special Models.1,699.50

BE32271 PTO Driveline, 1-3/8 In. 1000 RPM Telescoping Tractor Hookup with Slip ClutchFor 9 Series - 469, 469 Silage, 569 and 559 Silage Balers.

1,537.80





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BE32270 PTO Driveline, 540 RPM Telescoping Tractor Hookup with Slip Clutch

For 9 Series - 459, 459 Silage, 559, 559 Silage, 469, 469 Silage, 569 and 569 Silage Balers.1,537.80




See Parts


See Parts


See Parts


BE31105 Crop Deflector KitIncluded with balers ordered WITH CoverEdge Surface Wrap AND Regular or MegaToothpickup ONLY.Minimizes possible crop buildup in the corners of the rear gate.Recommended when baling cornstalks or other very dry, brittle crops.Can be field-installed on balers, new orders or previously shipped, built withoutfactory-installed deflectors.

444.40


779.90


1,610.40


1,760.00




310.20








SUGGESTEDLIST PRICE

USD ($)




See Parts



Monitors/Displays/Controllers:BE30007 BaleTrak Pro Monitor LESS Mounting Brackets

(Order if Second Monitor is Desired)1) Connects to Tractor 3-Terminal Convenience Outlet. For tractors not equipped with aConvenience Outlet, order AE50549, 3-Terminal Convenience Outlet Wiring Harness fromParts.2) See Attachments for Field Conversion section to order Mounting Brackets.

1,523.50

A53254 L Mount Bracket See Parts

A54171 Mounting Bracket for Console See Parts

E88560 Mounting Bracket for Monitor/Display/Controller -John Deere Sound-Gard Body Cab Tractors

See Parts

BE23599 Mounting Brackets for Monitor/Display Controller -John Deere Sound-Gard Body Cab TractorsFor mounting BaleTrak Pro monitor to John Deere tractors with Sound-Gard Body cab.

78.10

BE23864 Mounting Brackets for Monitor/Display/Controller -5000 or 5010 Series Cab TractorFor mounting BaleTrak Pro monitor to 5000 or 5010 Series Cab Tractor.

86.90





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BE23863 Mounting Brackets for Monitor/Display/Controller -

5000 or 6000 Series OS TractorsFor mounting Electric Twine Control Module only to 5000 or 6000 Series Operator StationTractor ROPS.Clamps to Roll-Over Protective Structure.

ORDERING INSTRUCTIONS FOR MOUNTING ELECTRIC TWINE CONTROL MODULE:

For mounting the Electric Twine Control Module in John Deere 5000 (with Cab), 6000 and7000 Series Tractors with ComfortGard Cabs and on all 7000 Series Open Station Tractors.Order the following brackets and hardware from Parts:A54171, Console Mount Bracket1 - 19M7784, Screw (M10 x 20)A53254, L Mount Bracket2 - 19M7784, Screw (M10 x 20)

For mounting the Electric Twine Control Module in John Deere Tractors with Sound-GardBody.Order the following plate and hardware from Parts:E88560, Console Plate2 - 03H1701, Cge. Bolt (1/4 x 3/4)2 - 24H1657, Washer (21/64 x 1-1/4 x 7/64)2 - 14H952, Wing Nut (1/4)

For mounting the Electric Twine Control Module on Open Station John Deere 5000 and 6000Series Tractors.Order BE23863, Mounting Brackets (Clamps on ROP Support).Also order the following brackets and hardware from Parts:A54171, Console Mount Bracket1 - 19M7784, Screw (M10 x 20)A53254, L Mount Bracket

86.90

BE24231 Mounting Brackets for Monitor/Display/Controller -5020 Series IOOS TractorsFor mounting BaleTrak Pro monitor to 5020 Series Isolated Open Operator Station TractorsONLY.

113.30

BE23519 Mounting Brackets for Monitor/Display/Controller -5020, 5025, 6000, 7000, or 8000 Series Cab TractorsFor mounting BaleTrak Pro monitor to 5020, 5025, 6000, 6005, 6010, 6015, 6020, 7000, 7010,7020, or 8000 Series Cab Tractors.

78.10

BE23840 Mounting Brackets for Monitor/Display/Controller -6000 Series OS or 7000 Series TractorFor mounting BaleTrak Pro monitor to 6000 Series Operator Station Tractors (SN148721 andbelow) or ALL 7000 Series Tractors.

86.90

BE23862 Mounting Brackets for Monitor/Display/Controller -6000, 6010, 6020 Series OS TractorsFor mounting BaleTrak Pro monitor to 6000, 6010 or 6020 Series Open Operator StationTractors (Standard models SN148722 and above or Low Profile models SN148787 and above).

167.20

BE23963 Mounting Brackets for Monitor/Display/Controller - 6003, 6005, or 7005 Series OS TractorsFor mounting BaleTrak Pro monitor to 6403, 6603, 6405, 6605 or 7405 Open OperatorStation Tractors.

179.30

BE32327 Slip Clutch Alert and Automatic CompensationRequires BaleTrak Pro Monitor and MegaWidePlus or MegaTooth pickup. Included inMegaWidePlus (Code 3020) or MegaTooth Pickup (Code 3010) for MY2010 and newermodels.

346.50





SUGGESTEDLIST PRICE

USD ($)




TY15133 Fire Extinguisher Mounting BracketRequired to mount TY25183 Fire Extinguisher.Also order (4) 37M7058 Self-Tapping Screws from Parts.

See Parts

TY25183 Fire Extinguisher, Water Type (U.S. and Canada)Requires TY15133 Mounting Bracket and (4) 37M7058 Self-Tapping Screws from Parts.

See Parts



343.20


570.90

BE23893 Gathering WheelsBalers with Regular and MegaTooth Pickup ONLY.

1,710.50

BE32241 Hydraulic Pickup Lift with Down StopBalers with Regular or MegaTooth Pickup ONLY.Requires tractor equipped with two Selective Control Valve Functions.

533.50

BE31145 Pickup Gauge Wheels, Right and LeftBalers with Regular Pickup ONLY.

605.00

Tires:BE31125 21.5L-16.1 In. Hi-Flotation Tire Conversion

For MegaWide or MegaWidePlus Pickups ONLY. Will cause feeding problems with Regular orMegaTooth Pickups.Includes set of 21.5L-16.1 In. tires/wheels, required 8-bolt hub/spindle assemblies, andattaching parts.

3,973.20

Twine and Surface Wrap:BE24157 Adjustable Twine Guides (Includes Left and Right Hand Twine Guides) 191.40

BE32449 CoverEdge Surface Wrap BundleSpanish or French Operator Manual and Decal Kit must be ordered separately.

9,260.90

BE32467 Standard B-wrap KitThe B-wrap kit is required to use B-wrap material. Balers must be 7, 8, or 9 Series (nonpremium) with a BaleTrak Pro monitor. The speed compensation/slip clutch alert kit is alsorequired. See www.ambraco.com for more details.

399.30




61.6 In. (1565mm) Wide Up to72 In. (1829mm) Diameter BaleWeighing up to 2400 lb. (907kg)Eight 7 In. (178mm) Wide,DiamondTough Triple Weave BeltsDiamond Tread Friction Surface Belts


MegaWidePlus Plus Pickup:78 In. (2.0 M), Inside87 In. (2.2 M), Flare to Flare

Chain DriveFour-Bar Pickup Reel (four left and four right),

120 TeethAdjustable Hay CompressorsAdjustable Height ControlSide Flare Crop Guides

Pickup Gauge Wheels, Right and LeftAdjustable Roller BaffleAutomatic Slip Clutch Alert and Speed Compensation

Constant Velocity PTOHookup - Free-Rotation, Lockback Collar,Slip Clutch Protected



Visual Twine Movement IndicatorAdjustable Twine GuidesEight Ball Twine StorageAdjustable Wheel SpindlesScrew-type JackMechanical Bale Diameter IndicatorHinged ShieldsHydraulic Gate LockoutFlashing Warning Lights withTurning Signal


Bale-Trak Pro Monitor/Controller:(Less Mounting Brackets)Monitor Functions:





For Tractors not Equipped with a ConvenienceOutlet, Order AE50549, 3-Terminal ConvenienceOutlet Wiring Harness from Parts.

Balers Equipped with Hydraulic Pickup Lift RequireTractor with Two SCV's.


SUGGESTEDLIST PRICE

USD ($)



1941E 569 Round Baler PR 38,933.00

DESTINATION




569 Round Baler PREquipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)



Same Price

PRIORITY REPLENISHMENT PACKAGES0850 1000 RPM PTO - 1 3/8 In. with Slip Clutch, MegaWidePlus Pickup, 14L x 16.1 Tires OR

21.5L x 16.1 Tires, Bale Push Bar, and CoverEdge Surface Wrap with Twine, HydraulicPickup Lift1) 1000 RPM PTO - 1 3/8 In. (Code 1020).2) 14L x 16.1, 8PR Hi-Flo Tires (Code 2020) OR 21.5L x 16.1 Tires (Code 2030).3) MegaWidePlus Pickup (Code 3020).4) Bale Push Bar (Code 4000).5) CoverEdge Wrapping System with Twine (Code 5500).6) Hydraulic Pickup Lift - MegaWidePlus Pickup (Code 8100)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration

0851 540 RPM PTO with Slip Clutch, MegaWidePlus Pickup, 14L x 16.1 Tires OR 21.5L x 16.1Tires, Bale Push Bar, and CoverEdge Surface Wrap with Twine, Hydraulic Pickup Lift1) 540 RPM PTO (Code 1010).2) 14L x 16.1, 8PR Hi-Flo Tires (Code 2020) OR 21.5L x 16.1 Tires (Code 2030).3) MegaWide Plus Pickup (Code 3020).4) Bale Push Bar (Code 4000).5) CoverEdge Wrapping System (Code 5500).6) Hydraulic Pickup Lift - MegaWidePlus Pickup (Code 8100)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration




SURFACE WRAPPING SYSTEM - FACTORY INSTALLED5500 CoverEdge Surface Wrap 6,194.00



PICKUPS - FACTORY INSTALLED3020 MegaWidePlus Pickup with Slip Clutch Alert and Compensation

Includes Pickup Gauge Wheels, Right and Left.4,205.00



569 Round Baler PRContinued



SUGGESTEDLIST PRICE

USD ($)



Balers with MegaWidePlus Pickup ONLY.Requires tractor equipped with two Selective Control Valve Functions.

485.00


Density Control:9014 Variable Core Valve 388.00



71.00


Density Control:BE23827 Variable Core Valve 426.80



78.10

Twine and Surface Wrap:BE32467 Standard B-wrap Kit

The B-wrap kit is required to use B-wrap material. Balers must be 7, 8, or 9 Series (nonpremium) with a BaleTrak Pro monitor. The speed compensation/slip clutch alert kit is alsorequired. See www.ambraco.com for more details.

399.30






THIS PAGE IS INTENTIONALLY LEFT BLANK





MegaWidePlus Pickup78 In. (2.0 M), Inside87 In. (2.2 M), Flare to FlareChain DriveFour-Bar Pickup Reel (four left and four right),






Visual Twine Movement IndicatorAdjustable Twine GuidesEight Ball Twine Storage21.5L x 16.1, 10 PR Hi-Flotation TiresScrew-type JackMechanical Bale Diameter IndicatorHinged ShieldsHydraulic Gate LockoutFlashing Warning Lights withTurning Signal

10,000 lbs. (45 kN) Safety ChainSilage Special componentsStaggered Roll Auger KitStarter Roll Scraper

Surface Wrapping SystemCoverEdge Surface Wrap with Twine System

Bale EjectionBale Pushbar









SUGGESTEDLIST PRICE

USD ($)



1947E 569 Silage Special Round Baler 54,585.00

DESTINATION



569 Silage Special Round BalerEquipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)

DESTINATION ...Continued...0184 Canada Same Price








Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


569 Silage Special Round BalerContinued



SUGGESTEDLIST PRICE

USD ($)



Option Code includes a country specific Homologation Kit.A separate, additional COMAR NET ITEM CHARGE for rust proofing will be added when thisCode is ordered.

339.00

0166 UkraineA COMAR Net Charge for rust proofing will be added when this Code is ordered.

Net Item Charge

0125 BelarusOption Code includes a country specific Homologation Kit.A separate, additional COMAR NET ITEM CHARGE for rust proofing will be added when thisCode is ordered.

339.00



Same Price


Same Price


Same Price


Same Price


Same Price


Same Price

PACKAGES

540 RPM PTO, MegaWidePlus Pickup Packages0801 540 RPM PTO with Slip Clutch, MegaWidePlus Pickup, 21.5L x 16.1 In. Tires,

Bale Push Bar, and CoverEdge Surface Wrap with Twine1) 540 RPM PTO (Code 1010)2) 21.5L x 16.1 Tires3) MegaWidePlus Pickup4) Bale Push Bar5) CoverEdge Wrapping System with Twine (Code 5500)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration





SUGGESTEDLIST PRICE

USD ($)


1000 RPM PTO - 1 3/8 In., MegaWidePlus Pickup Packages0803 1000 RPM PTO - 1 3/8 In. with Slip Clutch, MegaWidePlus Pickup, 21.5L x 16.1 In. Tires,

Bale Push Bar, and CoverEdge Surface Wrap with Twine1) 1000 RPM PTO - 1 3/8 In. (Code 1020)2) 21.5L x 16.1 Tires3) MegaWidePlus Pickup4) Bale Push Bar5) CoverEdge Wrapping System with Twine (Code 5500)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration

1000 RPM PTO - 1 3/4 In., MegaWidePlus Pickup Packages0805 1000 RPM PTO - 1 3/4 In. with Slip Clutch, MegaWide Plus Pickup, 21.5L x 16.1 In. Tires,

Bale Push Bar, and CoverEdge Surface Wrap with Twine1) 1000 RPM PTO - 1 3/4 In. (Code 1030)2) 21.5L x 16.1 Tires3) MegaWidePlus Pickup4) Bale Push Bar5) CoverEdge Wrapping System with Twine (Code 5500)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration

LESS Twine System, MegaWidePlus Pickup Packages0802 540 RPM PTO with Slip Clutch, MegaWidePlus Pickup, 21.5L x 16.1 In. Tires, Bale Push

Bar and CoverEdge Surface Wrap LESS TWINE SYSTEM1) 540 RPM PTO (Code 1010)2) 21.5L x 16.1 Tires3) MegaWidePlus Pickup4) Bale Push Bar5) CoverEdge Wrapping System LESS Twine (Code 5550)Codes will automatically be added along with the associated incremental pricing foreach. Twine Wrap System CANNOT be later field installed.

In Configuration

0804 1000 RPM PTO - 1 3/8 In. with Slip Clutch, MegaWide Plus Pickup, 21.5L x 16.1 In. Tires,Bale Push Bar, and CoverEdge Surface Wrap LESS TWINE SYSTEM1) 1000 RPM PTO - 1 3/8 In. (Code 1020)2) 21.5L x 16.1 Tires3) MegaWidePlus Pickup4) Bale Push Bar5) CoverEdge Wrapping System LESS Twine(Code 5550)Codes will automatically be added along with the associated incremental pricing foreach. Twine Wrap System CANNOT be later field installed.

In Configuration

0806 1000 RPM PTO - 1 3/4 In. with Slip Clutch, MegaWide Plus Pickup, 21.5L x 16.1 In. Tires,Bale Push Bar, and CoverEdge Surface Wrap LESS TWINE SYSTEM1) 1000 RPM PTO - 1 3/4 In. (Code 1030)2) 21.5L x 16.1 Tires3) MegaWidePlus Pickup4) Bale Push Bar5) CoverEdge Wrapping System LESS Twine (Code 5550)Codes will automatically be added along with the associated incremental pricing foreach. Twine Wrap System CANNOT be later field installed.

In Configuration



1030 1-3/4 In. 1000 RPM PTO Hookup with Slip Clutch 134.00





SUGGESTEDLIST PRICE

USD ($)

PTO HOOKUP ...Continued...





Balers with MegaWidePlus Pickup ONLY.Requires tractor equipped with two Selective Control Valve Functions.Balers with Regular Pickup ONLY.Requires tractor equipped with two Selective Control Valve Functions.

485.00




No Charge


For 466, 566, 467, 567, 468, 568, 469 and 569 Models.388.00

Forming Chamber:9650 Side-Sheet Enhancement Kit

Replaceable wear liners made from abrasion resistant steel. Intended for highly abrasive cropssuch as corn stalks and peanut hay. Includes liners and attaching hardware. Can be used torepair balers with already worn side-sheets.

1,464.00



71.00

9012 Mounting Brackets for Monitor/Display Controller -John Deere Sound-Gard Body Cab TractorsFor mounting BaleTrak Pro monitor to John Deere tractors with Sound-Gard Body cab.

71.00





SUGGESTEDLIST PRICE

USD ($)










For 466, 566, 467, 567, 468, 568, 469 and 569 Models.426.80







SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...AE73355 Front Yoke and Lockback Collar, 1-3/4 In. 1000 RPM See Parts

















ONLY for 569 Round Baler and 569 Sllage Special Models.1,699.50


1,537.80

BE32270 PTO Driveline, 540 RPM Telescoping Tractor Hookup with Slip ClutchFor 9 Series - 459, 459 Silage, 559, 559 Silage, 469, 469 Silage, 569 and 569 Silage Balers.

1,537.80




See Parts





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...AA37254 Harness, Convenience Outlet

For adapting "5" and "6" Series monitors/displays/controllers with 3-Terminal femaleconnector to 2-Terminal female tractor convenience outlet.

See Parts


See Parts

Forming Chamber:BE32101 Side-Sheet Enhancement Kit


1,610.40




310.20






See Parts





1,523.50




See Parts





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BE23599 Mounting Brackets for Monitor/Display Controller -

John Deere Sound-Gard Body Cab TractorsFor mounting BaleTrak Pro monitor to John Deere tractors with Sound-Gard Body cab.

78.10


86.90

BE23863 Mounting Brackets for Monitor/Display/Controller -5000 or 6000 Series OS TractorsFor mounting Electric Twine Control Module only to 5000 or 6000 Series Operator StationTractor ROPS.Clamps to Roll-Over Protective Structure.





86.90


113.30


78.10


86.90


167.20





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BE23963 Mounting Brackets for Monitor/Display/Controller - 6003, 6005, or 7005 Series OS Tractors

For mounting BaleTrak Pro monitor to 6403, 6603, 6405, 6605 or 7405 Open OperatorStation Tractors.

179.30

BE32327 Slip Clutch Alert and Automatic CompensationIncluded in base equipment for MY2010 and later models.Requires BaleTrak Pro Monitor and MegaWidePlus pickup. Included in MegaWidePlus Pickup(Code 3020) for MY2010 and newer models.

346.50




See Parts


See Parts



343.20


570.90



3,973.20

Twine and Surface Wrap:BE32449 CoverEdge Surface Wrap Bundle

Spanish or French Operator Manual and Decal Kit must be ordered separately.9,260.90


399.30




61.6 In. (1565mm) Wide Up to72 In. (1829mm) Diameter BaleWeighing up to 2400 lb. (907kg)Eight 7 In. (178mm) Wide,DiamondTough Triple Weave BeltsDiamond Tread Friction Surface Belts


Premium MegaWidePlus Pickup62.4 In. (1.6 M), Inside71 In. (1.8 M), Flare to FlareChain DriveFour-Bar Pickup Reel, 96 TeethAdjustable Hay CompressorsAdjustable Height ControlSide Flare Crop GuidesLarger Cam and Cam BearingsLarger Spider Gears with Bearings

Pickup Gauge Wheels, Right and LeftAdjustable Roller BaffleAutomatic Cam Clutch Alert and Speed Compensation

Constant Velocity 540 RPM PTO TractorHookup - Free-Rotation, Lockback Collar,Cam Clutch Protected



Visual Twine Movement IndicatorAdjustable Twine GuidesEight Ball Twine Storage21.5L x 16.1, 10 PR Hi-Flotation TiresScrew-type JackMechanical Bale Diameter IndicatorGull Wing Composite DoorsHydraulic Gate LockoutFlashing Warning Lights withTurning Signal

10,000 lbs. (45 kN) Safety ChainHydraulic Pickup LiftVariable Core ValveFactory Installed Grease BankSurface Wrapping System

CoverEdge Surface Wrap with Twine SystemLESS ISO Bus display, display can be ordered(Less Mounting Brackets)Display Functions:

Gate Latched-ReadyBale Shape IndicatorsNear Full Size AlertFull Bale AlarmBale Full-Size Wrap StartedOversize Bale AlertGate Partially Open-StopDisplay Bale SizeOut of NetNet CutoffSelection of Twine or NetOn Board DiagnosticsBale CounterLow Voltage IndicatorDisplay Error CodesBale Size CalibrationThird Bale Shape Sensor

Controller FunctionsNet or Twine ApplicationAuto Wrap CycleControl of Bale SizeControl of Twine Spacing/Net WrapsNumber of End WrapsEnd Wrap LocationControl of Soft Core



SUGGESTEDLIST PRICE

USD ($)



1925E 469 Premium Round Baler 48,073.00

DESTINATION




469 Premium Round BalerEquipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)









Net Item Charge


Net Item Charge


Net Item Charge



Same Price


Same Price


Same Price


Same Price


Same Price


Same Price

PACKAGES





SUGGESTEDLIST PRICE

USD ($)


540 RPM PTO, MegaWidePlus Pickup Packages0802 540 RPM PTO with Cam Clutch, 21.5 x 16.1 Tires, Premium MegaWidePlus Pickup, Bale

Push Bar and CoverEdge Surface Wrap with Twine1) 540 RPM PTO (Code 1010)2) 21.5L - 16.1 Tires3) Premium MegaWidePlus Pickup4) Bale Push Bar (Code 4000)5) CoverEdge Wrapping System with Twine (Code 5500)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration

0803 540 RPM PTO with Cam Clutch, 21.5 x 16.1 Tires, Premium MegaWidePlus Pickup, LESSBale Push Bar and CoverEdge Surface Wrap with Twine1) 540 RPM PTO (Code 1010)2) 21.5L - 16.1 Tires3) Premium MegaWidePlus Pickup4) LESS Bale Push Bar (Code 4095)5) CoverEdge Wrapping System with Twine (Code 5500)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration



In Configuration


In Configuration



In Configuration





SUGGESTEDLIST PRICE

USD ($)


LESS Twine System, MegaWidePlus Pickup Packages0801 540 RPM PTO with Cam Clutch, Premium MegaWidePlus Pickup, 21.5L x 16.1 In. Tires,

Bale Push Bar and CoverEdge Surface Wrap LESS TWINE SYSTEM1) 540 RPM PTO (Code 1010)2) 21.5L - 16.1 Tires (Code 2030)3) MegaWidePlus Pickup (Code 3020)4) Bale Push Bar (Code 4000)5) CoverEdge Wrapping System LESS Twine (Code 5550)Codes will automatically be added along with the associated incremental pricing foreach. Twine Wrap System CANNOT be later field installed.

In Configuration

0804 1000 RPM PTO - 1 3/8 In. with Cam Clutch, Premium MegaWide Plus Pickup, 21.5L x 16.1In. Tires, Bale Push Bar, and CoverEdge Surface Wrap LESS TWINE SYSTEM1) 1000 RPM PTO - 1 3/8 In. (Code 1020)2) 21.5L x 16.1 Tires (Code 2030)3) MegaWidePlus Pickup (Code 3020)4) Bale Push Bar (Code 4000)5) CoverEdge Wrapping System LESS Twine(Code 5550)Codes will automatically be added along with the associated incremental pricing foreach. Twine Wrap System CANNOT be later field installed.

In Configuration

0807 1000 RPM PTO - 1 3/4 In. with Cam Clutch, Premium MegaWide Plus Pickup, 21.5L x 16.1In. Tires, Bale Push Bar, and CoverEdge Surface Wrap LESS TWINE SYSTEM1) 1000 RPM PTO - 1 3/4 In. (Code 1030)2) 21.5L x 16.1 Tires (Code 2030)3) MegaWidePlus Pickup (Code 3020)4) Bale Push Bar (Code 4000)5) CoverEdge Wrapping System LESS Twine (Code 5550)Codes will automatically be added along with the associated incremental pricing foreach. Twine Wrap System CANNOT be later field installed.

In Configuration

PTO HOOKUP1010 540 RPM PTO Hookup with Cam Clutch Same Price

1020 1-3/8 In. 1000 RPM PTO Hookup with Cam Clutch In Base Price

1030 1-3/4 In. 1000 RPM PTO Hookup with Cam Clutch 134.00










SUGGESTEDLIST PRICE

USD ($)


Tractor Baler Automation Activation:8748 Baler Automation Activation

1. For baler automation on 9 Series Premium Round Balers.2. Includes one, lifetime activation of baler for automation. Activation is non-transferrable, itstays with the baler.3. For 6030/7030 Premium MY10 and newer, 6R/7R MY11 and newer, ISO Bus ready tractorwith electronic SCV's.4. A seat switch and pushbar are required.5. A tractor and baler automation activation can be purchased later, please see AMS pricepages if ordered after the fact.6. SCV control available on all transmission types, SCV and vehicle speed control available onIVT transmissions ONLY.7. Tractor activation must be purchased through the AMS Price Pages.

399.00




No Charge

Premium Baler Displays:9746 GreenStar 2 1800 Display

Does not include display harness (PF90687). Display shipped separately.1,850.00

9747 GreenStar 3 2630 DisplayDoes not include display harness (PF90687). Display shipped separately.

5,895.00

9748 ISOBUS Display Mounting BracketFor 30, 40, 50, 55, 60, or 70 Series Tractors.

154.00

9749 ISOBUS Display Mounting BracketFor 6000, 7000, and 8000 Series Tractors.

154.00

9750 Auxiliary ISOBUS HarnessFor 30, 40, 50, 55, 60, or 70 Series Tractors or competitive tractor models without a currentISOBUS wiring harness installed. Requires a 3 terminal convenience outlet.Includes battery (AFH205692) harness and cab harness (AF205697).Due to restricted functionality, harness is recommended for Premium Round Baler use ONLY.

110.00

9751 Auxiliary ISOBUS HarnessFor 6000, 7000, and 8000 Series Tractors without a current ISOBUS wiring harness installed.Requires a 3 terminal convenience outlet.Includes battery harness (AFH205691) and cab harness (AFH205697).Due to restricted functionality harness is recommended for Premium Round Baler Use.

110.00





SUGGESTEDLIST PRICE

USD ($)





1,464.00












SUGGESTEDLIST PRICE

USD ($)


Drivelines:BE32273 PTO Driveline, 1-3/4 In. 1000 RPM Telescoping Tractor Hookup with Cam Clutch

469, 569 Premium Baler Models.2,088.90

BE32287 PTO Driveline, 1-3/8 In. 1000 RPM Telescoping Tractor Hookup with Cam Clutch469, 569 Premium Baler Models.

1,934.90


1,934.90




See Parts


See Parts


See Parts



779.90


1,610.40


1,593.90




310.20








SUGGESTEDLIST PRICE

USD ($)




See Parts





113.30



TY15133 Fire Extinguisher Mounting BracketRequired to mount TY25183 Fire Extinguisher.Also order BE32293 - Mounting Support Bundle.

See Parts

TY25183 Fire Extinguisher, Water Type (U.S. and Canada) See Parts



343.20

Premium Baler Displays:BE32277 Auxiliary ISOBus Harness

For 30, 40, 50, 55, 60, or 70 Series Tractors or competitive tractor models without a currentISO Bus wiring harness installed. Requires a 3 terminal convenience outlet.Includes battery (AFH205692) harness and cab harness (AF205697).Due to restricted functionality, harness is recommended for Premium Round Baler use ONLY.

440.00

BE32278 Auxiliary ISOBus HarnessFor 6000, 7000, and 8000 Series Tractors without a current ISOBus wiring harness installed.Requires a 3 terminal convenience outlet.Includes battery harness (AFH205691) and cab harness (AFH205697).Due to restricted functionality harness is recommended for Premium Round Baler Use.

440.00




46.1 In. (1171mm) Wide Up to72 In. (1829mm) Diameter Bale

Weighing up to 1650 lb. (748 kg)Six 7 In. (178mm) Wide,DiamondTough Triple Weave BeltsDiamond Tread Friction Surface Belts

Mato, Plate Type Belt Splices

MegaWidePlus Pickup:62.4 In. (1.6 M), Inside71 In. (1.8 M), Flare to FlareChain DriveFour-Bar Pickup Reel, 96 TeethAdjustable Roller BaffleAdjustable Hay CompressorsAdjustable Height ControlSide Flare Crop GuidesPickup Gauge Wheels, Right and LeftAutomatic Slip Clutch Alert and Speed

Compensation














SUGGESTEDLIST PRICE

USD ($)



1920E 469 Round Baler 37,121.00

DESTINATION







SUGGESTEDLIST PRICE

USD ($)









Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge







SUGGESTEDLIST PRICE

USD ($)



Same Price


Same Price


Same Price


Same Price


Same Price


Same Price

PACKAGES

540 RPM PTO, MegaWidePlus Pickup Packages0806 540 RPM PTO with Slip Clutch, MegaWidePlus Pickup, 14L x 16.1 Tires, LESS Bale Push

Bar, and LESS CoverEdge Surface Wrap1) 540 RPM PTO (Code 1010)2) 14L x 16.1, 8 PR Hi-Flo Tires (Code 2020)3) MegaWide Plus Pickup4) LESS Bale Push Bar (Code 4095)5) LESS CoverEdge Wrapping System (Code 5595)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration

0807 540 RPM PTO with Slip Clutch, MegaWidePlus Pickup, 14L x 16.1 Tires, Bale Push Bar,and LESS CoverEdge Surface Wrap1) 540 RPM PTO (Code 1010)2) 14L x 16.1, 8 PR Hi-Flo Tires (Code 2020)3) MegaWide Plus Pickup4) Bale Push Bar (Code 4000)5) LESS CoverEdge Wrapping System (Code 5595)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration

0808 540 RPM PTO with Slip Clutch, MegaWidePlus Pickup, 14L x 16.1 Tires, Bale Push Bar,and CoverEdge Surface Wrap with Twine1) 540 RPM PTO (Code 1010)2) 14L x 16.1, 8PR Hi-Flo Tires (Code 2020)3) MegaWide Plus Pickup4) Bale Push Bar (Code 4000)5) CoverEdge Wrapping System (Code 5500)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration

0809 540 RPM PTO with Slip Clutch, MegaWidePlus Pickup, 21.5L x 16.1 In. Tires, Bale PushBar, and CoverEdge Surface Wrap with Twine1) 540 RPM PTO (Code 1010)2) 21.5L x 16.1 Tires (Code 2030)3) MegaWide Plus Pickup4) Bale Push Bar (Code 4000)5) CoverEdge Wrapping System with Twine (Code 5500)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration





SUGGESTEDLIST PRICE

USD ($)

PACKAGES ...Continued...0823 540 RPM PTO with Slip Clutch, MegaWidePlus Pickup, 14L x 16.1 Tires,

CoverEdge Surface Wrap with Twine, and LESS Bale Push Bar1) 540 RPM PTO (Code 1010)2) 14L x 16.1, 8 PR Hi-Flo Tires (Code 2020)3) MegaWidePlus Pickup4) LESS Bale Push Bar (Code 4095)5) CoverEdge Wrapping System with Twine (Code 5500)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration

0825 540 RPM PTO with Slip Clutch, MegaWidePlus Pickup, 21.5L x 16.1 In. Tires,Bale Push Bar, and LESS CoverEdge Surface Wrap1) 540 RPM PTO (Code 1010)2) 21.5L x 16.1 Tires (Code 2030)3) MegaWidePlus Pickup4) Bale Push Bar (Code 4000)5) LESS CoverEdge Wrapping System (Code 5595)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration

1000 RPM PTO - 1 3/8 In., MegaWidePlus Pickup Packages0816 1000 RPM PTO - 1 3/8 In. with Slip Clutch, MegaWidePlus Pickup, 14L x 16.1 Tires, Bale

Push Bar, and CoverEdge Surface Wrap with Twine1) 1000 RPM PTO - 1 3/8 In. (Code 1020)2) 14L x 16.1, 8PR Hi-Flo Tires (Code 2020)3) MegaWidePlus Pickup4) Bale Push Bar (Code 4000)5) CoverEdge Wrapping System with Twine (Code 5500)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration

0817 1000 RPM PTO - 1 3/8 In. with Slip Clutch, MegaWidePlus Pickup, 21.5L x 16.1 In. Tires,Bale Push Bar, and CoverEdge Surface Wrap with Twine1) 1000 RPM PTO - 1 3/8 In. (Code 1020)2) 21.5L x 16.1 tires (Code 2030)3) MegaWidePlus Pickup4) Bale Push Bar (Code 4000)5) CoverEdge Wrapping System with Twine (Code 5500)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration












SUGGESTEDLIST PRICE

USD ($)

SURFACE WRAPPING SYSTEM - FACTORY INSTALLED...Continued...





485.00




No Charge


For 466, 566, 467, 567, 468, 568, 469 and 569 Models.388.00




1,464.00



71.00


71.00





SUGGESTEDLIST PRICE

USD ($)


Pickup:









For 466, 566, 467, 567, 468, 568, 469 and 569 Models.426.80





SUGGESTEDLIST PRICE

USD ($)





















For 9 Series - 469, 469 Silage, 569 and 559 Silage Balers.1,537.80


1,537.80







SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...AE50549 Convenience Outlet (3-Pin)

For tractor with no convenience outlet.See Parts


See Parts


See Parts



779.90


1,610.40


1,593.90




310.20






See Parts







SUGGESTEDLIST PRICE

USD ($)




1,523.50




See Parts


78.10


86.90






86.90


113.30





SUGGESTEDLIST PRICE

USD ($)



78.10


86.90


167.20


179.30


346.50




See Parts


See Parts



343.20

BE32240 Hydraulic Pickup Lift with Down StopBalers with MegaWidePlus Pickup ONLY.Requires tractor equipped with two Selective Control Valve Functions.

533.50



3,973.20







SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BE32467 Standard B-wrap Kit


399.30








46.1 In. (1171mm) Wide Up to72 In. (1829mm) Diameter Bale

Weighing up to 1650 lb. (748 kg)Six 7 In. (178mm) Wide,DiamondTough Triple Weave BeltsDiamond Tread Friction Surface Belts



Compensation














SUGGESTEDLIST PRICE

USD ($)



1921E 469 Round Baler PR 37,121.00

DESTINATION







SUGGESTEDLIST PRICE

USD ($)



Same Price

PRIORITY REPLENISHMENT PACKAGES0850 540 RPM PTO with Slip Clutch, MegaWidePlus Pickup, 14L x 16.1 Tires OR 21.5L x 16.1

Tires, Bale Push Bar, and CoverEdge Surface Wrap with Twine, Hydraulic Pickup Lift1) 540 RPM PTO (Code 1010).2) 14L x 16.1, 8PR Hi-Flo Tires (Code 2020) OR 21.5L x 16.1 Tires (Code 2030).3) Bale Push Bar (Code 4000).4) CoverEdge Wrapping System (Code 5500).5) Hydraulic Pickup Lift - MegaWidePlus Pickup (Code 8100)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration









485.00







SUGGESTEDLIST PRICE

USD ($)




71.00





78.10

Pickup:BE32240 Hydraulic Pickup Lift with Down Stop


533.50



399.30








46.1 In. (1171mm) Wide Up to72 In. (1829mm) Diameter BaleWeighing Up to 2200 Lbs. (907 kg)Six 7 In. (178mm) Wide,DiamondTough Triple Weave BeltsDiamond Tread Friction Surface Belts



Compensation


Silage Special componentsStaggered Roll Auger KitStarter Roll Scraper


Large Feed OpeningPowered Round Bar Starter RollPowered Front Auger Cleaning RollAuger Flighting on Lower Rear Gate RollBearing ProtectorsElectric Twine Wrap-DoubleArm Adjustable, Self-Activated

Visual Twine Movement IndicatorsAdjustable Twine GuideEight Ball Twine Storage14L x 16.1, 8PR Hi-Flotation TiresAdjustable Wheel SpindlesScrew-Type JackMechanical Bale Diameter IndicatorHinged ShieldsHydraulic Gate Lockout

Flashing Warning Lights withTurning Signal

10,000 Lbs. (45 kN) Safety Chain

Bale-Trak Pro Monitor/Controller:(Less Mounting Brackets)(Connects to Tractor 3-Terminal

Convenience Outlet)Manual Twine Actuator Movement

with Electronic BypassMonitor Functions:

Gate Latched-ReadyBale Shape IndicatorsNear Full Size AlertFull Bale AlarmBale Full Size-Wrap StartedOversize Bale AlertGate Partially Open-StopDisplay Bale SizeOut of NetNet CutoffOn Board DiagnosticsBale CounterLow Voltage IndicatorDisplay Error Codes

Controller Functions:Selection of Twine or NetAuto Wrap CycleAdjust Bale SizeAdjust Twine Spacing/Net WrapsNumber of End WrapsEnd Wrap LocationControl of Soft Core

For Tractors Not Equipped with a ConvenienceOutlet, Order AE50549, 3-Terminal ConvenienceOutlet Wiring Harness from Parts.



SUGGESTEDLIST PRICE

USD ($)




DESTINATION







SUGGESTEDLIST PRICE

USD ($)









Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge







SUGGESTEDLIST PRICE

USD ($)



Same Price


Same Price


Same Price


Same Price


Same Price

PACKAGES

540 RPM PTO, MegaWidePlus Pickup Packages0807 540 RPM PTO with Slip Clutch, MegaWidePlus Pickup, 14L x 16.1 Tires, Bale Push Bar,

and LESS CoverEdge Surface Wrap1) 540 RPM PTO (Code 1010)2) 14L x 16.1, 8 PR Hi-Flo Tires (Code 2020)3) MegaWide Plus Pickup4) Bale Push Bar (Code 4000)5) LESS CoverEdge Wrapping System (Code 5595)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration

0808 540 RPM PTO with Slip Clutch, MegaWidePlus Pickup, 14L x 16.1 Tires, Bale Push Bar,and CoverEdge Surface Wrap with Twine1) 540 RPM PTO (Code 1010)2) 14L x 16.1, 8PR Hi-Flo Tires (Code 2020)3) MegaWide Plus Pickup4) Bale Push Bar (Code 4000)5) CoverEdge Wrapping System (Code 5500)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration

0809 540 RPM PTO with Slip Clutch, MegaWidePlus Pickup, 21.5L x 16.1 In. Tires, Bale PushBar, and CoverEdge Surface Wrap with Twine1) 540 RPM PTO (Code 1010)2) 21.5L x 16.1 Tires (Code 2030)3) MegaWide Plus Pickup4) Bale Push Bar (Code 4000)5) CoverEdge Wrapping System with Twine (Code 5500)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration

0823 540 RPM PTO with Slip Clutch, MegaWidePlus Pickup, 14L x 16.1 Tires,CoverEdge Surface Wrap with Twine, and LESS Bale Push Bar1) 540 RPM PTO (Code 1010)2) 14L x 16.1, 8 PR Hi-Flo Tires (Code 2020)3) MegaWidePlus Pickup4) LESS Bale Push Bar (Code 4095)5) CoverEdge Wrapping System with Twine (Code 5500)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration





SUGGESTEDLIST PRICE

USD ($)


1000 RPM PTO - 1 3/8 In., MegaWidePlus Pickup Packages0817 1000 RPM PTO - 1 3/8 In. with Slip Clutch, MegaWidePlus Pickup, 21.5L x 16.1 In. Tires,

Bale Push Bar, and CoverEdge Surface Wrap with Twine1) 1000 RPM PTO - 1 3/8 In. (Code 1020)2) 21.5L x 16.1 tires (Code 2030)3) MegaWidePlus Pickup4) Bale Push Bar (Code 4000)5) CoverEdge Wrapping System with Twine (Code 5500)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration

0821 1000 RPM PTO - 1 3/8 In. with Slip Clutch, MegaWidePlus Pickup, 21.5L x 16.1 In. Tires,CoverEdge Surface Wrap with Twine and LESS Bale Push Bar1) 1000 RPM PTO - 1 3/8 In. (Code 1020)2) 21.5L x 16.1 tires (Code 2030)3) MegaWidePlus Pickup4) LESS Bale Push Bar (Code 4095)5) CoverEdge Wrapping System (Code 5500)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration












485.00






SUGGESTEDLIST PRICE

USD ($)




No Charge


For 466, 566, 467, 567, 468, 568, 469 and 569 Models.388.00

Forming Chamber:9650 Side-Sheet Enhancement Kit


1,464.00



71.00


71.00





SUGGESTEDLIST PRICE

USD ($)










For 466, 566, 467, 567, 468, 568, 469 and 569 Models.426.80







SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...AE73355 Front Yoke and Lockback Collar, 1-3/4 In. 1000 RPM See Parts

















For 9 Series - 469, 469 Silage, 569 and 559 Silage Balers.1,537.80


1,537.80




See Parts


See Parts





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...AE50531 Harness, Convenience Outlet

For adapting "5" and "6" Series monitors/displays/controllers with 2-Terminal maleconnectors to 3-Terminal female tractor convenience outlet.

See Parts

Forming Chamber:BE32101 Side-Sheet Enhancement Kit


1,610.40




310.20






See Parts





1,523.50




See Parts


78.10





SUGGESTEDLIST PRICE

USD ($)


5000 or 5010 Series Cab TractorFor mounting BaleTrak Pro monitor to 5000 or 5010 Series Cab Tractor.

86.90






86.90


113.30


78.10


86.90


167.20


179.30





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BE32327 Slip Clutch Alert and Automatic Compensation

Included in base equipment for MY2010 and later models.Requires BaleTrak Pro Monitor and MegaWidePlus pickup. Included in MegaWidePlus Pickup(Code 3020) for MY2010 and newer models.

346.50




See Parts


See Parts



343.20


533.50



3,973.20




399.30




46.1 In. (1171mm) Wide Up to72 In. (1829mm) Diameter BaleWeighing Up to 2200 Lbs. (907 kg)Six 7 In. (178mm) Wide,DiamondTough Triple Weave BeltsDiamond Tread Friction Surface Belts



Compensation





Visual Twine Movement IndicatorsAdjustable Twine GuideEight Ball Twine Storage14L x 16.1, 8PR Hi-Flotation TiresAdjustable Wheel SpindlesScrew-Type JackMechanical Bale Diameter IndicatorHinged ShieldsHydraulic Gate Lockout

Flashing Warning Lights withTurning Signal







For Tractors Not Equipped with a ConvenienceOutlet, Order AE50549, 3-Terminal ConvenienceOutlet Wiring Harness from Parts.



SUGGESTEDLIST PRICE

USD ($)



1928E 469 Silage Special Round Baler PR 39,106.00

DESTINATION



469 Silage Special Round Baler PREquipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)




Same Price

PRIORITY REPLENISHMENT PACKAGES0850 540 RPM PTO with Slip Clutch, MegaWidePlus Pickup, 14L x 16.1 Tires OR 21.5L x 16.1

Tires, Bale Push Bar, and CoverEdge Surface Wrap with Twine, Hydraulic Pickup Lift1) 540 RPM PTO (Code 1010).2) 14L x 16.1, 8PR Hi-Flo Tires (Code 2020) OR 21.5L x 16.1 Tires (Code 2030).3) Bale Push Bar (Code 4000).4) CoverEdge Wrapping System (Code 5500).5) Hydraulic Pickup Lift - MegaWidePlus Pickup (Code 8100)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration









485.00



469 Silage Special Round Baler PRContinued



SUGGESTEDLIST PRICE

USD ($)





71.00





78.10



533.50



399.30











Regular Pickup:61.4 In. (1.6 M), Inside71 In. (1.8 M), Flare to FlareRoller Chain with V-Belt DriveFour-Bar Pickup Reel, 96 TeethAdjustable Hay CompressorsAdjustable Height ControlSide Flare Crop Guides






Bale-Trak Pro Monitor/Controller:









SUGGESTEDLIST PRICE

USD ($)



1930E 559 Round Baler 31,648.00

DESTINATION







SUGGESTEDLIST PRICE

USD ($)


(Export) South America:0217 Paraguay



Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge

(Export) Africa:0047 South Africa




Same Price


Same Price


Same Price


Same Price





SUGGESTEDLIST PRICE

USD ($)

PACKAGES

Regular Pickup Packages0802 540 RPM PTO with Slip Clutch, Regular Pickup, 14L X 16.1 Tires, and LESS CoverEdge

Surface Wrap1) 540 RPM PTO2) 14L x 16.1, 8PR Hi-Flo Tires (Code 2020)3) Regular Pickup (Code 3000)4) LESS CoverEdge Wrapping System (Code 5595)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration

MegaWidePlus Pickup Packages0806 MegaWidePlus Pickup, 540 RPM PTO with Slip Clutch, 14L x 16.1 Tires, and LESS

CoverEdge Surface Wrap1) 540 RPM PTO2) 14L x 16.1, 8PR Hi-Flo Tires (Code 2020)3) MegaWidePlus Pickup (Code 3020)4) LESS CoverEdge Wrapping System (Code 5595)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration

0808 MegaWidePlus Pickup, 540 RPM PTO with Slip Clutch, 14L x 16.1 Tires, and CoverEdgeSurface Wrap with Twine1) 540 RPM PTO2) 14L x 16.1, 8PR Hi-Flo Tires (Code 2020)3) MegaWidePlus Pickup (Code 3020)4) CoverEdge Wrapping System with Twine (Code 5500)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration

0809 MegaWidePlus Pickup, 540 RPM PTO with Slip Clutch, 21.5L x 16.1 Tires,and CoverEdge Surface Wrap with Twine1) 540 RPM PTO2) 21.5L x 16.1, 10 Ply Tires (Code 2030)3) MegaWidePlus Pickup (Code 3020)4) CoverEdge Wrapping System with Twine (Code 5500)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration

0810 MegaWidePlus Pickup, 540 RPM PTO with Slip Clutch, 21.5L x 16.1 Tires,and LESS CoverEdge Surface Wrap1) 540 RPM PTO2) 21.5L x 16.1, 10 Ply Tires (Code 2030)3) MegaWidePlus Pickup (Code 3020)4) LESS CoverEdge Wrapping System (Code 5595)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration





In Base Price


4,205.00





SUGGESTEDLIST PRICE

USD ($)




Bale Ejection:9003 Bale Ramp

Compatible with 5 Ft. x 5 Ft. Balers.Requires 2200 PSI Tractor Hydraulics.

1,353.00



No Charge






71.00


71.00

9013 Mounting Brackets for Monitor/Display/Controller - 5000, 5010, or5020 Series OS TractorsFor mounting BaleTrak Pro monitor to 5000, 5010, or 5020 Series Open Operator StationTractors (Straddle Mount Open Operator Station ONLY for 5020 Series models).

79.00







SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS - ORDER AS DESIRED ...Continued...9000 Hydraulic Pickup Lift with Down Stop

Balers with Regular Pickup ONLY.1) Requires tractor equipped with two Selective Control Valve Functions,OR2) Requires three Tractor Selective Control Valve Functions if baler has Hydraulic TwineWrap.

485.00

9001 Hydraulic Pickup Lift with Down StopBalers with MegaWidePlus Pickup ONLY.Requires tractor equipped with two Selective Control Valve Functions.

485.00


555.00

Twine and Surface Wrap:9006 Adjustable Twine Guides (Includes Left and Right Hand Twine Guides) 174.00











SUGGESTEDLIST PRICE

USD ($)


Bale Ejection:BE32291 Bale Ramp


1,488.30


Drivelines:BE32270 PTO Driveline, 540 RPM Telescoping Tractor Hookup with Slip Clutch





See Parts


See Parts


See Parts



444.40


779.90


1,760.00




310.20





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BE32262 Rubber Drawbar Shield See Parts





See Parts





1,523.50




See Parts


78.10


86.90





SUGGESTEDLIST PRICE

USD ($)


5000 or 6000 Series OS TractorsFor mounting Electric Twine Control Module only to 5000 or 6000 Series Operator StationTractor ROPS.Clamps to Roll-Over Protective Structure.





86.90


113.30


78.10


86.90


167.20

BE23861 Mounting Brackets for Monitor/Display/Controller - 5000, 5010, or5020 Series OS TractorsFor mounting BaleTrak Pro monitor to 5000, 5010, or 5020 Series Open Operator StationTractors (Straddle Mount Open Operator Station ONLY for 5020 Series models).

86.90


179.30





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BE32327 Slip Clutch Alert and Automatic Compensation

Included in base equipment for MY2010 and later models.Requires BaleTrak Pro Monitor and MegaWidePlus pickup. Included in MegaWidePlus Pickup(Code 3020) for MY2010 and newer models.

346.50




See Parts


See Parts

Pickup:BE23893 Gathering Wheels


BE32241 Hydraulic Pickup Lift with Down StopBalers with Regular Pickup ONLY.1) Requires tractor equipped with two Selective Control Valve Functions,OR2) Requires three Tractor Selective Control Valve Functions if baler has Hydraulic TwineWrap.

533.50


533.50


605.00



3,973.20


BE32451 CoverEdge Surface Wrap BundleBalers with Factory equipped BaleTrak Pro or BaleTrak Plus monitors ONLY.Spanish or French Operator Manual and Decal Kit must be ordered separately.

See Parts


399.30











MegaWide Plus Pickup78 In. (2.0 M), Inside87 In. (2.2 M), Flare to FlareChain DriveFour-Bar Pickup Reel (four left and four right),






Visual Twine Movement IndicatorsAdjustable Twine GuideEight Ball Twine Storage14L x 16.1, 8PR Hi-Flotation TiresAdjustable Wheel SpindlesScrew-Type JackMechanical Bale Diameter IndicatorHinged ShieldsHydraulic Gate LockoutFlashing Warning Lights withTurning Signal


Silage Special components

Staggered Roll Auger KitStarter Roll Scraper

Surface Wrapping SystemCoverEdge Surface Wrap with Twine System






For Tractors Not Equipped with a ConvenienceOutlet, Order AE50549, 3-Terminal ConvenienceOutlet.



SUGGESTEDLIST PRICE

USD ($)




DESTINATION






SUGGESTEDLIST PRICE

USD ($)







Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge





Same Price


Same Price





SUGGESTEDLIST PRICE

USD ($)

LANGUAGE AND DECALS ...Continued...0437 Spanish

Spanish operator manual and text free decals.Same Price


Same Price

PACKAGES

MegaWidePlus Pickup Packages0801 MegaWidePlus Pickup, 540 RPM PTO with Slip Clutch, 14L x 16.1 Tires,

and CoverEdge Surface Wrap with Twine1) 540 RPM PTO2) 14L x 16.1, 8PR Hi-Flo Tires (Code 2020)3) MegaWidePlus Pickup4) CoverEdge Wrapping System with Twine Codes will automatically be added along with theassociated incremental pricing for each.

In Configuration

0802 MegaWidePlus Pickup, 540 RPM PTO with Slip Clutch, 21.5L x 16.1 Tires,and CoverEdge Surface Wrap with Twine1) 540 RPM PTO2) 21.5L x 16.1, 10 Ply Tires (Code 2030)3) MegaWidePlus Pickup4) CoverEdge Wrapping System with TwineCodes will automatically be added along with the associated incremental pricing for each.

In Configuration






1,353.00



No Charge






SUGGESTEDLIST PRICE

USD ($)


Forming Chamber:



71.00


71.00


79.00

Pickup:9001 Hydraulic Pickup Lift with Down Stop


485.00

Twine and Surface Wrap:9006 Adjustable Twine Guides (Includes Left and Right Hand Twine Guides) 174.00





SUGGESTEDLIST PRICE

USD ($)










1,488.30








SUGGESTEDLIST PRICE

USD ($)





See Parts


See Parts


See Parts

Forming Chamber:BE32443 Silage Special Kit - 5' Wide

Includes staggerd belt roll auger kit and starter roll scaper knife. Recommended for balingsilage hay and very dry brittle crops.

1,760.00




310.20






See Parts





1,523.50





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...A53254 L Mount Bracket See Parts



See Parts


78.10


86.90






86.90


113.30


78.10


86.90





SUGGESTEDLIST PRICE

USD ($)


6000, 6010, 6020 Series OS TractorsFor mounting BaleTrak Pro monitor to 6000, 6010 or 6020 Series Open Operator StationTractors (Standard models SN148722 and above or Low Profile models SN148787 and above).

167.20


86.90


179.30


346.50




See Parts


See Parts



533.50



3,973.20



See Parts


399.30




46.1 In. (1171mm) Wide up to60 In. Diameter BaleWeighing up to 1000 Lbs. (454 kg)

Six 7 In. (178 mm) Wide, 3-Ply Nylon Polyester,Diamond Tread Friction Surface Belts

Extra Service Life Belt Splices

Regular Pickup:45.9 In. (1.2 M), Inside55.5 In. (1.4 M), Flare to FlareRoller Chain with V-Belt DriveFour-Bar Pickup Reel, 72 TeethAdjustable Height ControlAdjustable Contoured Hay CompressorsSide Flare Crop Guides

Constant Velocity 540 RPM PTO TractorHookup - Cat. 3, Lockback Collar,Shearbolt Protected

Fixed Hydraulic DensityLarge Feed OpeningPowered Roundbar Starter RollStaggered Belt RollHydraulic Double Twine WrapVisual Twine Movement IndicatorsFour Ball Twine Storage11L-14 Tires

Fixed Wheel SpindlesScrew Type JackMechanical Bale Shape IndicatorMechanical Bale Size IndicatorAudible Alert for Near Full,

Full Bale Size, and Oversize BaleHinged ShieldsMechanical Gate LockoutFlashing Warning Lights with

Turning Signal10,000 Lbs. (45 kN) Safety Chain

For Tractors with only One Selective Control Valveorder Fasse Hydraulic Multiplier Valve SW700-1510through Parts.

For Tractors not equipped with a ConvenienceOutlet, order AE50549, 3-Terminal ConvenienceOutlet Wiring Harness from Parts. To adapt AudibleAlert to 2 Terminal Tractor Convenience Outlet,order AA37254, Harness through Parts.


SUGGESTEDLIST PRICE

USD ($)



1913E 459 Standard Round Baler 21,302.00

DESTINATION








Net Item Charge


459 Standard Round BalerEquipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)

DESTINATION ...Continued...0213 Chile



Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge

(Export) India:0074 India




Same Price


Same Price


Same Price


Same Price

PACKAGES


459 Standard Round BalerContinued



SUGGESTEDLIST PRICE

USD ($)


Regular Pickup Packages0802 Regular Pickup, 540 RPM PTO with Shearbolt, 11L x 14 Tires, and Mechanical Bale Shape

Indicators with Bale Trak Pro Monitor1) United States (Code 0202)2) English (Code 0409)3) 540 RPM PTO with Shearbolt (Code 1000)4) Electric Double Twine System (Code 5050)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration

0801 Regular Pickup, 540 RPM PTO with Shearbolt, 11L x 14 Tires, Mechanical Bale ShapeIndicators with Hydraulic Double Twine Wrap1) United States (Code 0202)2) English (Code 0409)3) 540 RPM PTO with Shearbolt (Code 1000)4) Hydraulic Double Twine Wrap (Code 5010)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration

0803 Regular Pickup, 540 RPM PTO with Slip Clutch, 11L x 14 Tires, and Mechanical BaleShape Indicators with Hydraulic Double Twine Wrap1) United States (Code 0202)2) English (Code 0409)3) 540 RPM PTO with Slip Clutch (Code 1010)4) Hydraulic Double Twine System (Code 5010)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration

0804 Regular Pickup, 540 RPM PTO with Slip Clutch, 11L x 14 Tires, and Mechanical BaleShape Indicators with Bale Trak Pro Monitor1) United States (Code 0202)2) English (Code 0409)3) 540 RPM PTO with Slip Clutch (Code 1010)4) Electric Double Twine System (Code 5050)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration

PTO HOOKUP1010 540 RPM PTO Hookup with Slip Clutch 390.00

1000 540 RPM PTO Hookup with Shearbolt In Base Price

TWINE WRAPPING SYSTEM - FACTORY INSTALLED5010 Hydraulic Double Twine Wrap In Base Price

5050 Auto Electric Double Twine Wrap with BaleTrak Pro Monitor(Control Monitor Mounting Brackets Are Not Included)Offers MOST of same features as BaleTrak Pro for other twine balers. Key EXCEPTION isbale shape indication.To order Mounting Parts, see Notes in Attachments for Field Conversion Section.

1,288.00


Bale Ejection:9003 Bale Ramps and Take Up Arms 1,716.00





SUGGESTEDLIST PRICE

USD ($)




No Charge


Available only for machines ordered with option 5050-Electric Tie.388.00

Monitors/Displays/Controllers:9010 BaleTrak Pro Monitor LESS Mounting Brackets


1,385.00

9011 Mounting Brackets for Monitor/Display/Controller -5020, 5025, 6000, 7000, or 8000 Series Cab TractorsFor mounting BaleTrak Pro monitor to 5020, 5025, 6000, 6005, 6010, 6015, 6020, 7000, 7010,7020, or 8000 Series Cab Tractors.

71.00


71.00


79.00

9007 Bale CounterFull kit includes bale counter and hardware to mount counter.

56.00




555.00





SUGGESTEDLIST PRICE

USD ($)









Compatible with 459 Standard Round Baler.Requires 2200 PSI Tractor Hydraulics.Order BE32453 - Auxiliary Take Up Arms if ordered as field installed attachment.

1,446.00

BE32453 Take Up Arms459C Standard and PR Round Balers

270.00


BE32298 Variable Core ValveAvailable only for machines ordered with option 5050-Electric Tie.

426.80





SUGGESTEDLIST PRICE

USD ($)







See Parts


See Parts


See Parts




310.20






See Parts



Monitors/Displays/Controllers:BE22696 Bale Counter

Full kit includes bale counter and hardware to mount counter.61.60

AM3118E Bale CounterOnly the bale counter. To order the full kit, order BE22696.

See Parts





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BE30007 BaleTrak Pro Monitor LESS Mounting Brackets


1,523.50

BE32448 BaleTrak Pro Monitor LESS Mounting Brackets(Order if Second Monitor is Desired)1) Connects to Tractor 3-Terminal Convenience Outlet. For tractors not equipped with aConvenience Outlet, order AE50549, 3-Terminal Convenience Outlet Wiring Harness fromParts.2) See Attachments for Field Conversion section to order Mounting Brackets.

1,523.50




See Parts


78.10


86.90






86.90





SUGGESTEDLIST PRICE

USD ($)



113.30


78.10


86.90


167.20


86.90


179.30




See Parts


See Parts




605.00

Service Tools:AE43296 Lacer Vise for Extra Service Life Belt Fasteners See Parts




46.1 In. (1171mm) Wide up to60 In. Diameter BaleWeighing up to 1000 Lbs. (454 kg)

Six 7 In. (178 mm) Wide, 3-Ply Nylon Polyester,Diamond Tread Friction Surface Belts




Fixed Hydraulic DensityLarge Feed OpeningPowered Roundbar Starter RollStaggered Belt RollAutomatic Electric Twine Wrap - BaleTrak ProMonitorVisual Twine Movement IndicatorsFour Ball Twine Storage11L-14 TiresFixed Wheel SpindlesScrew Type JackMechanical Bale Shape IndicatorAudible Alert for Near Full,Full Bale Size, and Oversize Bale

Hinged ShieldsMechanical Gate LockoutFlashing Warning Lights withTurning Signal






Controller Functions:Selection of TwineAuto Wrap CycleAdjust Bale SizeAdjust Twine SpacingNumber of End WrapsEnd Wrap LocationControl of Soft Core

For Tractors with only One Selective Control ValveOrder Fasse Hydraulic Multiplier Valve SW700-1510through Parts.

For Tractors not Equipped with a ConvenienceOutlet, Order AE50549, 3-Terminal ConvenienceOutlet Wiring Harness from Parts. To Adapt AudibleAlert to 2 Terminal Tractor Convenience Outlet,Order AA37254, Harness through Parts.


SUGGESTEDLIST PRICE

USD ($)



1914E 459 Standard Round Baler PR 21,302.00

DESTINATION




459 Standard Round Baler PREquipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)



Same Price

PRIORITY REPLENISHMENT PACKAGES0850 Regular Pickup, 540 RPM PTO with Shearbolt, 11L x 14 Tires, and Mechanical Bale Shape

Indicators with Bale Trak Pro Monitor1) United States (Code 0202).2) English (Code 0409).3) 540 RPM PTO with Shearbolt (Code 1000).4) Electric Double Twine System (Code 5050).Codes will automatically be added along with the associated incremental pricing for each.

In Configuration

PTO HOOKUP1000 540 RPM PTO Hookup with Shearbolt In Base Price

TWINE WRAPPING SYSTEM - FACTORY INSTALLED5050 Auto Electric Double Twine Wrap with BaleTrak Pro Monitor

(Control Monitor Mounting Brackets Are Not Included)Offers MOST of same features as BaleTrak Pro for other twine balers. Key EXCEPTION isbale shape indication.To order Mounting Parts, see Notes in Attachments for Field Conversion Section.

1,288.00






71.00

9007 Bale CounterFull kit includes bale counter and hardware to mount counter.

56.00

Pickup:9004 Pickup Gauge Wheels, Right and Left

Balers with Regular Pickup ONLY.555.00

Bale Ejection:9003 Bale Ramps and Take Up Arms 1,716.00


459 Standard Round Baler PRContinued



SUGGESTEDLIST PRICE

USD ($)



Compatible with 459 Standard Round Baler.Requires 2200 PSI Tractor Hydraulics.Order BE32453 - Auxiliary Take Up Arms if ordered as field installed attachment.

1,446.00


270.00






78.10

Pickup:BE31145 Pickup Gauge Wheels, Right and Left

Balers with Regular Pickup ONLY.605.00








46.1 In. (1171 mm) Wide Up to60 In. (1524 mm) Diameter BaleWeighing up to 1100 Lbs. (499 kg)

Six 7 In. (178mm) Wide,DiamondTough Triple Weave BeltsDiamond Tread Friction Surface Belts


Regular Pickup:45.9 In. (1.2 M), Inside55.5 In. (1.4 M), Flare to FlareRoller Chain with V-Belt DriveFour-Bar Pickup Reel, 72 TeethAdjustable Hay CompressorsAdjustable Height ControlSide Flare Crop Guides

Constant Velocity 540 RPM PTO TractorHookup - Cat. 4, Lockback Collar,Slip Clutch Protected

Fixed Hydraulic Density ControlLarge Feed OpeningPowered Roundbar Starter RollStaggered Belt RollBearing ProtectorsDouble Electric Twine ArmsVisual Twine Movement IndicatorsSix Ball Twine Storage14L x 16.1, 8PR Hi Flotation TiresAdjustable Wheel SpindlesScrew Type JackMechanical Bale Size IndicatorHinged ShieldsHydraulic Gate LockoutFlashing Warning Lights withTurning Signal

10,000 Lb. (45 kN) Safety Chain

BaleTrak Pro Monitor/Controller:(Less Mounting Brackets)Monitor Functions:Gate Closed-ReadyBale Shape IndicatorsNear Full Size Alert

Full Bale AlarmBale Full Size-Wrap StartedOversize Bale AlertGate Partially OpenDisplay Bale SizeOut of NetNet CutoffSelection of Twine or NetOn Board DiagnosticsBale CounterLow Voltage IndicatorBale Size CalibrationDisplay Error CodesManual Actuator Movementwith Electronic Bypass

Controller Functions:Net or Twine ApplicationAuto Wrap CycleControl of Bale SizeControl of Twine Spacing/Net WrapsNumber of End WrapsEnd Wrap LocationControl of Soft Core(Connects to Tractor 3-TerminalConvenience Outlet)

One Tractor Selective Control Valve is requiredwhen baler is equipped with BaleTrak Pro orBaleTrak Plus Monitor/Controller.

Two Tractor Selective Control Valves are requiredwhen baler is equipped with BaleTrak Pro orBaleTrak Plus Monitor/Controller and HydraulicPickup Lift.

For tractors not equipped with a convenienceoutlet, order AE50549, 3-Terminal ConvenienceOutlet Wiring Harness from Parts, see Attachmentsfor Field Conversion.


SUGGESTEDLIST PRICE

USD ($)



1911E 459 Round Baler 27,465.00

DESTINATION







SUGGESTEDLIST PRICE

USD ($)







Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge







Same Price





SUGGESTEDLIST PRICE

USD ($)

LANGUAGE AND DECALS ...Continued...0413 French (Canada ONLY)

French operator manual and text free decals.Same Price


Same Price


Same Price

PACKAGES

Regular Pickup Packages0801 540 RPM PTO with Slip Clutch, Regular Pickup, 11L x 14 In. Tires, and LESS CoverEdge

Surface Wrap1) 540 RPM PTO2) 11L x 14, 8PR Tires (Code 2010)3) Regular Pickup (Code 3000)4) LESS CoverEdge Wrapping System (Code 5595)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration

0803 540 RPM PTO with Slip Clutch, Regular Pickup, 14L x 16.1 Tires, and CoverEdge SurfaceWrap with Twine1) 540 RPM PTO2) 14L x 16.1, 8PR, Hi-Flo Tires (2020)3) Regular Pickup (Code 3000)4) CoverEdge Wrapping System with Twine (Code 5500)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration


CoverEdge Surface Wrap1) 540 RPM PTO2) 14L x 16.1, 8PR Hi-Flo Tires (Code 2020)3) MegaWidePlus Pickup (Code 3020)4) LESS CoverEdge Wrapping System (Code 5595)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration

0808 MegaWidePlus Pickup, 540 RPM PTO with Slip Clutch, 14L x 16.1 Tires, and CoverEdgeSurface Wrap with Twine1) 540 RPM PTO2) 14L x 16.1, 8PR Hi-Flo Tires (Code 2020)3) MegaWidePlus Pickup (Code 3020)4) CoverEdge Wrapping System with Twine (Code 5500)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration

0809 MegaWidePlus Pickup, 540 RPM PTO with Slip Clutch, 21.5L x 16.1 Tires, and LESSCoverEdge Surface Wrap1) 540 RPM PTO2) 21.5L x 16.1, 10 Ply Tires (Code 2030)3) MegaWidePlus Pickup (Code 3020)4) LESS CoverEdge Wrapping System (Code 5595)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration





SUGGESTEDLIST PRICE

USD ($)

PACKAGES ...Continued...0810 MegaWidePlus Pickup, 540 RPM PTO with Slip Clutch, 21.5L x 16.1 Tires, and CoverEdge

Surface Wrap with Twine1) 540 RPM PTO2) 21.5L x 16.1, 10 Ply Tires (Code 2030)3) MegaWidePlus Pickup (Code 3020)4) CoverEdge Wrapping System with Twine (Code 5500)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration


2010 11L-14, 8PR Tires -872.00




In Base Price


3,864.00






1,446.00



No Charge






SUGGESTEDLIST PRICE

USD ($)






71.00


71.00


79.00




555.00

9000 Hydraulic Pickup Lift with Down StopBalers with Regular Pickup ONLY.1) Requires tractor equipped with two Selective Control Valve Functions,OR2) Requires three Tractor Selective Control Valve Functions if baler has Hydraulic TwineWrap.

485.00


485.00

Twine and Surface Wrap:9006 Adjustable Twine Guide, Left Side 129.00





SUGGESTEDLIST PRICE

USD ($)










1,446.00








SUGGESTEDLIST PRICE

USD ($)





See Parts


See Parts


See Parts



444.40


779.90


1,593.90




310.20






See Parts






SUGGESTEDLIST PRICE

USD ($)





1,523.50




See Parts


78.10


86.90






86.90





SUGGESTEDLIST PRICE

USD ($)



113.30


78.10


86.90


167.20


86.90


179.30


346.50




See Parts


See Parts



BE32241 Hydraulic Pickup Lift with Down StopBalers with Regular Pickup ONLY.1) Requires tractor equipped with two Selective Control Valve Functions,OR2) Requires three Tractor Selective Control Valve Functions if baler has Hydraulic TwineWrap.

533.50





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BE32240 Hydraulic Pickup Lift with Down Stop


533.50


605.00



3,973.20

Twine and Surface Wrap:BE24158 Adjustable Twine Guide, Left Side 141.90


7,203.90


399.30




46.1 In. (1171 mm) Wide Up to60 In. (1524 mm) Diameter BaleWeighing up to 1100 Lbs. (499 kg)



MegaWidePlus Pickup:62.4 In. (1.6 M), Inside71 In. (1.8 M), Flare to FlareChain DriveFour-Bar Pickup Reel, 96 TeethAdjustable Hay CompressorsAdjustable Height ControlSide Flare Crop Guides


Constant Velocity 540 RPM PTO TractorHookup - Cat. 4, Lockback Collar,Slip Clutch Protected

Fixed Hydraulic Density ControlLarge Feed OpeningPowered Roundbar Starter RollStaggered Belt RollBearing ProtectorsDouble Electric Twine ArmsVisual Twine Movement IndicatorsSix Ball Twine Storage14L x 16.1, 8PR Hi Flotation TiresAdjustable Wheel SpindlesScrew Type JackMechanical Bale Size IndicatorHinged ShieldsHydraulic Gate LockoutFlashing Warning Lights withTurning Signal

10,000 Lb. (45 kN) Safety Chain

BaleTrak Pro Monitor/Controller:(Less Mounting Brackets)Monitor Functions:Gate Closed-Ready

Bale Shape IndicatorsNear Full Size AlertFull Bale AlarmBale Full Size-Wrap StartedOversize Bale AlertGate Partially OpenDisplay Bale SizeOut of NetNet CutoffSelection of Twine or NetOn Board DiagnosticsBale CounterLow Voltage IndicatorBale Size CalibrationDisplay Error CodesManual Actuator Movementwith Electronic Bypass


One Tractor Selective Control Valve is RequiredWhen Baler is Equipped with BaleTrak Pro orBaleTrak Plus Monitor/Controller.

Two Tractor Selective Control Valves are RequiredWhen Baler is Equipped with BaleTrak Pro orBaleTrak Plus Monitor/Controller and HydraulicPickup Lift.

For Tractors not Equipped with a ConvenienceOutlet, Order AE50549, 3-Terminal ConvenienceOutlet Wiring Harness from Parts, see Attachmentsfor Field Conversion.


SUGGESTEDLIST PRICE

USD ($)



1912E 459 Round Baler PR 27,465.00

DESTINATION






SUGGESTEDLIST PRICE

USD ($)




Same Price

PRIORITY REPLENISHMENT PACKAGES0850 MegaWidePlus Pickup, 540 RPM PTO with Slip Clutch, 14L x 16.1 Tires, and CoverEdge

Surface Wrap with Twine1) 14L x 16.1, 8PR Hi-Flo Tires (Code 2020).2) MegaWidePlus Pickup (Code 3020).3) CoverEdge Wrapping System with Twine (Code 5500).Codes will automatically be added along with the associated incremental pricing for each.

In Configuration



PICKUPS - FACTORY INSTALLED3020 MegaWidePlus Pickup with Slip Clutch Alert and Compensation

Includes Pickup Gauge Wheels, Right and Left.3,864.00





71.00



1,446.00





SUGGESTEDLIST PRICE

USD ($)




1,446.00




78.10



399.30








46.1 In. (1171mm) Wide Up to60 In. (1524mm) Diameter BaleWeighing up to 1100 lbs. (499 kg)



MegaWidePlus Pickup:62.4 In. (1.6 M), Inside71 In. (1.8 M), Flare to FlareFour-Bar Pickup Reel, 96 TeethAdjustable Hay CompressorsAdjustable Height ControlSide Flare Crop GuidesPickup Gauge Wheels, Right and LeftAutomatic Slip Clutch Alert and Compensation

Adjustable Roller Baffle

Constant Velocity 540 RPM PTO TractorHookup-Cat. 4, Lockback Collar,Slip Clutch Protected

Fixed Hydraulic Density ControlLarge Feed OpeningPowered Round Bar Starter Rollwith Scraper

Powered Front Auger Cleaning RollAuger Flighting on LowerRear Gate Roll

Staggered Belt RollBearing ProtectorsDouble Electric Twine ArmsVisual Twine Movement IndicatorsSix Ball Twine StorageMechanical Bale Size IndicatorScrew Type Jack14L x 16.1, 8PR Hi-Flotation TiresAdjustable Wheel SpindlesHinged ShieldsHydraulic Gate LockoutFlashing Warning Lights withTurning Signal



BaleTrak Pro Monitor/Controller:


Gate Closed-ReadyBale Shape IndicatorsNear Full Size AlertFull Bale AlarmFull Bale Size-Wrap StartedOversize Bale AlertGate Partially OpenDisplay Bale SizeOut of NetNet CutoffSelection of Twine or NetOn Board DiagnosticsBale CounterLow Voltage IndicatorDisplay Error CodesBale Size CalibrationManual Actuator Movementwith Electronic Bypass


One Tractor Selective Control Valve is requiredwhen Baler is equipped with BaleTrak Pro orBaleTrak Plus Monitor/Controller.

Two Tractor Selective Control Valves are requiredwhen Baler is equipped with BaleTrak Pro orBaleTrak Plus Monitor Controller and HydraulicPickup Lift.

For Tractors not equipped with a ConvenienceOutlet, order AE50549, 3-Terminal ConvenienceOutlet Wiring Harness from Parts, see Attachmentsfor Field Conversion.


SUGGESTEDLIST PRICE

USD ($)




DESTINATION





SUGGESTEDLIST PRICE

USD ($)









Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge





Same Price





SUGGESTEDLIST PRICE

USD ($)

LANGUAGE AND DECALS ...Continued...


Same Price


Same Price


Same Price

PACKAGES


CoverEdge Surface Wrap1) 540 RPM PTO2) 14L x 16.1, 8PR, Hi-Flo Tires (Code 2020)3) MegaWidePlus Pickup4) LESS CoverEdge Wrapping System Code 5595)5) United States (Code 0202)6) English (Code 0409)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration

0803 MegaWidePlus Pickup, 540 RPM PTO with Slip Clutch, 14L x 16.1 Tires,and CoverEdge Surface Wrap with Twine1) 540 RPM PTO2) 14L x 16.1, 8PR Hi-Flo Tires (Code 2020)3) MegaWidePlus Pickup4) CoverEdge Wrapping System with Twine (Code 5500)5) United States (Code 0202)6) English (Code 0409)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration

0804 MegaWidePlus Pickup, 540 RPM PTO with Slip Clutch, 21.5L x 16.1 Tires,and CoverEdge Surface Wrap with Twine1) 540 RPM PTO2) 21.5L x 16.1, 10 Ply Tires (Code 2030)3) MegaWidePlus Pickup4) CoverEdge Wrapping System with Twine (Code 5500)5) United States (Code 0202)6) English (Code 0409)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration

0805 MegaWidePlus Pickup, 540 RPM PTO with Slip Clutch, 21.5L x 16.1 Tires,and LESS CoverEdge Surface Wrap1) 540 RPM PTO2) 21.5L x 16.1, 10 Ply Tires (Code 2030)3) MegaWidePlus Pickup4) CoverEdge Wrapping System with Twine (Code 5595)5) United States (Code 0202)6) English (Code 0409)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration







SUGGESTEDLIST PRICE

USD ($)






1,446.00



No Charge




71.00


71.00


79.00



485.00






SUGGESTEDLIST PRICE

USD ($)










1,446.00








SUGGESTEDLIST PRICE

USD ($)





See Parts


See Parts


See Parts

Forming Chamber:BE32442 Silage Special Kit - 4' Wide

Includes staggerd belt roll auger kit and starter roll scaper knife. Recommended for balingsilage hay and very dry brittle crops.

1,593.90




310.20






See Parts





1,523.50





SUGGESTEDLIST PRICE

USD ($)




See Parts


78.10


86.90






86.90


113.30


78.10


86.90





SUGGESTEDLIST PRICE

USD ($)



167.20


86.90


179.30


346.50




See Parts


See Parts



533.50



3,973.20



7,203.90


399.30




46.1 In. (1171mm) Wide Up to60 In. (1524mm) Diameter BaleWeighing up to 1100 lbs. (499 kg)



MegaWidePlus Pickup:62.4 In. (1.6 M), Inside71 In. (1.8 M), Flare to FlareFour-Bar Pickup Reel, 96 TeethAdjustable Hay CompressorsAdjustable Height ControlSide Flare Crop GuidesPickup Gauge Wheels, Right and LeftAutomatic Slip Clutch Alert and Compensation

Adjustable Roller Baffle

Constant Velocity 540 RPM PTO TractorHookup-Cat. 4, Lockback Collar,Slip Clutch Protected

Fixed Hydraulic Density ControlLarge Feed OpeningPowered Round Bar Starter Rollwith Scraper

Powered Front Auger Cleaning RollAuger Flighting on LowerRear Gate Roll

Staggered Belt RollBearing ProtectorsDouble Electric Twine ArmsVisual Twine Movement IndicatorsSix Ball Twine StorageMechanical Bale Size IndicatorScrew Type JackAdjustable Wheel SpindlesHinged ShieldsHydraulic Gate LockoutFlashing Warning Lights withTurning Signal



BaleTrak Pro Monitor/Controller:(Less Mounting Brackets)Monitor Functions:Gate Closed-ReadyBale Shape IndicatorsNear Full Size AlertFull Bale AlarmFull Bale Size-Wrap StartedOversize Bale Alert

Gate Partially OpenDisplay Bale SizeOut of NetNet CutoffSelection of Twine or NetOn Board DiagnosticsBale CounterLow Voltage IndicatorDisplay Error CodesBale Size CalibrationManual Actuator Movementwith Electronic Bypass


One Tractor Selective Control Valve is requiredwhen Baler is equipped with BaleTrak Pro orBaleTrak Plus Monitor/Controller.

Two Tractor Selective Control Valves are requiredwhen Baler is equipped with BaleTrak Pro orBaleTrak Plus Monitor Controller and HydraulicPickup Lift.

For Tractors not equipped with a ConvenienceOutlet, order AE50549, 3-Terminal ConvenienceOutlet Wiring Harness from Parts, see Attachmentsfor Field Conversion.

Control of Bale SizeControl of Twine Spacing/Net Wraps

Number of Twine End WrapsTwine End Wrap LocationControl of Variable Core(Connects to Tractor 3-TerminalConvenience Outlet)

Two Tractor Selective Control Valves are required.

For Tractors not equipped with a ConvenienceOutlet, order AE50549, 3-Terminal ConvenienceOutlet Wiring Harness from Parts.


SUGGESTEDLIST PRICE

USD ($)



1918E 459 Silage Special Round Baler PR 32,855.00


459 Silage Special Round Baler PREquipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)

BASE MACHINE ...Continued...

DESTINATION





Same Price

PRIORITY REPLENISHMENT PACKAGES0850 MegaWidePlus Pickup, 540 RPM PTO with Slip Clutch, 14L x 16.1 Tires OR 21.5L x 16.1

Tires,and CoverEdge Surface Wrap with Twine1) 14L x 16.1, 8PR Hi-Flo Tires (Code 2020) OR 21.5L x 16.1 Tires (Code 2030).2) CoverEdge Wrapping System with Twine (Code 5500).

Codes will automatically be added along with the associated incremental pricing for each.

In Configuration








71.00





SUGGESTEDLIST PRICE

USD ($)




485.00



1,446.00




1,446.00




78.10



533.50



399.30








46.1 In. (1171mm) Wide up to60 In. (1524mm) Diameter BaleSix 7 In. (178 mm) Wide, 3-Ply Nylon Polyester,Diamond Tread Friction Surface Belts


Wide Pickup:72.8 In. (1.8 M), Inside78.7 In. (2.0 M), Flare to FlareChain DriveFour-Bar Pickup Reel, 104 TeethWindow Front ShieldHydraulic Pickup LiftAdjustable DownstopSide Flare Crop GuidesPneumatic Gauge WheelsFoldable Gauge Wheels

Constant Velocity 540 RPM PTO TractorHookup - Lockback Collar, Cut-OutClutch Protected

MaxiCut Precutter14 Adjustable KnivesDrop Floor,Hydraulically Actuated

Knife Slot Fillers

Adjustable Hydraulic Density ControlVariable Core KitLarge Feed OpeningPowered Starter Roll with WeldedSlats and Scraper

Powered Upper 3rd RollStaggered Belt RollScrapers on No. 8 and 9 Gate RollsPowered Cross AugerGate Crop Deflectors, Right and LeftElectric Twine Wrap-DoubleArm Adjustable, Self-Activated

Visual Twine Movement IndicatorsTen Ball Twine StorageCoverEdge Net Wrap Extra Roll Storage31 x 13.5-15, Hi-Flotation TiresAdjustable Wheel SpindlesMechanical Bale Size IndicatorScrew Type JackAdjustable TongueMechanical Bale RampsHydraulic Gate LockoutFlashing Warning Lights withTurning Signal


LubricationAutomatic Chain OilerGrease Banks for:

Primary BalerMaxiCut Precutter SystemCoverEdge Wrap SystemTwine System

Bale-Trak Plus Monitor/Controller:(Less Mounting Brackets)Monitor Functions:

Gate Closed-ReadyBale Shape IndicatorsNear Full Size AlertFull Bale AlarmBale Full Size-Wrap StartedOversize Bale AlertGate Partially OpenDisplay Bale SizeDisengaged Knife AlarmPre-set Programs forTwine/Net Adjustments

Out of NetNet CutoffSelection of Twine or NetOn Board DiagnosticsBale CounterLow Voltage IndicatorBale Size Calibration

Controller Functions:Net or Twine ApplicationAuto Wrap CycleControl of Bale SizeControl of Twine Spacing/Net Wraps

Number of Twine End WrapsTwine End Wrap LocationControl of Variable Core(Connects to Tractor 3-TerminalConvenience Outlet)

Two Tractor Selective Control Valves are required.

For Tractors not equipped with a ConvenienceOutlet, order AE50549, 3-Terminal ConvenienceOutlet Wiring Harness from Parts.


SUGGESTEDLIST PRICE

USD ($)



606EC 854 Silage Special Round Baler 48,504.00

TIRES

AGRICULTURAL PRODUCTS




SUGGESTEDLIST PRICE

USD ($)

TIRES ...Continued...3016 31 x 13.5-15 In. 8 PR Tires In Base Price

3014 500/45-22.5 In. Tires 3,729.00


Knives Selection:8103 Knives Selection Option

Knives selection (0,7,7,14)289.00


Language Options for 854:9011 For machine with French specifications

Operator's Manual, French Language (OMCC59021).No Charge

9058 For machine with Spanish specificationsOperator's Manual, Spanish Language (OMCC59022).

No Charge

9101 Decals in Spanish No Charge





See Parts




310.20







SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...TY15133 Fire Extinguisher Mounting Bracket

Required to mount TY25183 Fire Extinguisher.Also order (4) 37M7058 Self-Tapping Screws from Parts.

See Parts


See Parts








46.1 In. (1171 mm) Wide up to48 In. (1295 mm) Diameter BaleWeighing up to 750 Lbs. (340 kg)

Six 7 in. (178 mm) Wide, 3-Ply Nylon Polyester,Diamond Tread Friction Surface Belts




Fixed Hydraulic Density ControlLarge Feed OpeningPowered Round Bar Starter RollStaggered Belt RollBearing ProtectorsHydraulic Double Twine WrapFive Ball Twine Storage9.5L-14, 6PR TiresAdjustable Wheel SpindlesScrew Type JackMechanical Bale Shape IndicatorMechanical Bale Size Indicator

Audible Alert for Near Full,Audible alert for Oversize BaleHinged ShieldsMechanical Gate LockoutFlashing Warning Lights with

Turning Signal10,000 Lb. (45 kN) Safety Chain

One Tractor Selective Control Valve is requiredwhen baler is equipped with Electric Twine Wrap.

Two Tractor Selective Control Valves are requiredwhen baler is equipped with Hydraulic Twine Wrap.

Three Tractor Selective Control Valves are requiredwhen baler is equipped with Hydraulic Twine Wrapand Hydraulic Pickup Lift.


To adapt Audible Alert to 2 Terminal TractorConvenience Outlet, order AA37254, Harness Wiringfrom Parts, see Attachments for Field Conversion.


SUGGESTEDLIST PRICE

USD ($)



1900E 449 Round Baler 20,905.00

DESTINATION











SUGGESTEDLIST PRICE

USD ($)

DESTINATION ...Continued...0220 Uruguay



Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge





Same Price


Same Price


Same Price

PACKAGES





SUGGESTEDLIST PRICE

USD ($)


Regular Pickup Packages0802 Regular Pickup, 540 RPM PTO with Shearbolt, Regular Pickup, 9.5L x 14 In. Tires,

Mechanical Bale Shape Indicators with Bale Trak Pro Monitor1) Regular Pickup (Code 3000)2) 540 RPM PTO with shearbolt (Code 1000)3) 9.5L x 14, 6PR Tires (Code 2000)4) Electric Double Twine System (Code 5040)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration

0801 Regular Pickup, 540 RPM PTO with Shearbolt, 9.5L x 14 In. Tires, Mechanical Bale ShapeIndicators with Hydraulic Double Twine Wrap1) Regular Pickup (Code 3000)2) 540 RPM PTO with Shearbolt (Code 1000)3) 9.5L x 14, 6PR Tires (Code 2000)4) Hydraulic Double Twine Wrap (Code 5010)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration

MegaWidePlus Pickup Packages0806 MegaWidePlus Pickup, 540 RPM PTO with Slip Clutch, 14L x 16.1 Tires, Mechanical Bale

Shape Indicators with Bale Trak Pro Monitor1) MegaWidePlus Pickup (Code 3020)2) 540 RPM PTO with Slip Clutch (Code 1010)3) 14L x 16.1, 8PR, Hi-Flo Tires (Code 2020)4) Electric Double Twine System (Code 5040)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration

0808 MegaWidePlus Pickup, 540 RPM PTO with Slip Clutch, 14L x 16.1 Tires, Mechanical BaleShape Indicators with Hydraulic Double Twine System1) MegaWidePlus Pickup (Code 3020)2) 540 RPM PTO with Slip Clutch (Code 1010)3. 14L x 16.1, 8PR, Hi-Flo Tires (Code 2020)4. Hydraulic Double Twine System (Code 5010)Codes will automatically be added along with the associated incremental pricing for each.

In Configuration

PTO HOOKUP1010 540 RPM PTO Hookup with Slip Clutch 390.00

1000 540 RPM PTO Hookup with Shearbolt In Base Price

TIRES2020 14L x 16.1, 8PR Hi-Flo Tires 940.00

2000 9.5L-14 In. 6PR Tires In Base Price

PICKUPS - FACTORY INSTALLED3000 Regular Pickup In Base Price

3020 MegaWidePlus PickupIncludes Pickup Gauge Wheels, Right and Left.

3,704.00

TWINE WRAPPING SYSTEM - FACTORY INSTALLED5010 Hydraulic Double Twine Wrap In Base Price





SUGGESTEDLIST PRICE

USD ($)

TWINE WRAPPING SYSTEM - FACTORY INSTALLED...Continued...

5040 Electric Double Twine Wrap with BaleTrak Pro Monitor(Control Monitor Mounting Brackets Are Not Included)Offers MOST of same features as BaleTrak Pro for other twine balers. Two key EXCEPTIONSare bale shape indication and soft core control.To order Mounting Parts, see Notes in Attachments for Field Conversion Section.

1,288.00


Bale Ejection:9003 Bale Ramp - Spring Loaded

Auxillary Take Up Arms are include with this bundle.1,181.00



No Charge



Monitors/Displays/Controllers:9007 Bale Counter




9000 Hydraulic Pickup Lift with Down StopBalers with Regular Pickup ONLY. Requires tractor equipped with two Selective Control ValveFunctions.

485.00


485.00

9004 Pickup Gauge Wheels, Right and LeftFor Balers with Regular or Megatooth Pickups.

555.00






SUGGESTEDLIST PRICE

USD ($)








Bale Ejection:BE32284 Bale Ramp - Spring Loaded

Auxillary Take Up Arms are include with this bundle.1,299.10






See Parts





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...AA37254 Harness, Convenience Outlet

For adapting "5" and "6" Series monitors/displays/controllers with 3-Terminal femaleconnector to 2-Terminal female tractor convenience outlet.

See Parts


See Parts



779.90




310.20






See Parts





AM3118E Bale CounterOnly the bale counter. To order the full kit, order BE22696.

See Parts

BE30007 BaleTrak Pro Monitor LESS Mounting Brackets(Order if Second Monitor is Desired)1) Connects to Tractor 3-Terminal Convenience Outlet. For tractors not equipped with aConvenience Outlet, order AE50549, 3-Terminal Convenience Outlet Wiring Harness fromParts.2) See Attachments for Field Conversion section to order Mounting Brackets.

1,523.50





SUGGESTEDLIST PRICE

USD ($)




See Parts


78.10


86.90






86.90


113.30


78.10


86.90





SUGGESTEDLIST PRICE

USD ($)



167.20


179.30




See Parts


See Parts



BE32241 Hydraulic Pickup Lift with Down StopBalers with Regular Pickup ONLY. Requires tractor equipped with two Selective Control ValveFunctions.

533.50


533.50

BE31145 Pickup Gauge Wheels, Right and LeftFor Balers with Regular or Megatooth Pickups.

605.00

Service Tools:AE43296 Lacer Vise for Extra Service Life Belt Fasteners See Parts





14 x 18 In. Bale 12 to 50 In. LongRegular Bale Chute74 In. Pickup with 104 Teeth80 Strokes per Minute, 30 In. StrokesCategory 4, Three Joint Heavy Duty

Powershaft with540 RPM PTO Sliding Collar Hookup,Long Tongue, Equal Angle Hitch,and Slip Clutch

Support Bracket for HydraulicHose and PTO Hookup

Pickup CompressorJack

11L-14 In. 6 PR Rib Implement Tireon Left Hand Side

26-12.00 12 In. 4 PR High FlotationTire on Right Hand Side

Plungerhead ExtensionsSafety Chain


SUGGESTEDLIST PRICE

USD ($)



6013E 328 Twine Baler 20,299.00

DESTINATION



(Export) Australia and New Zealand:0230 Australia


0237 New ZealandA COMAR Net Charge for rust proofing will be added when this Code is ordered.

Net Item Charge

(Export) Central America:0185 Costa Rica


0188 Dominican RepublicA COMAR Net Charge for rust proofing will be added when this Code is ordered.

Net Item Charge

0193 HondurasA COMAR Net Charge for rust proofing will be added when this Code is ordered.

Net Item Charge

0191 GuatemalaA COMAR Net Charge for rust proofing will be added when this Code is ordered.

Net Item Charge

0196 NicaraguaA COMAR Net Charge for rust proofing will be added when this Code is ordered.

Net Item Charge


328 Twine BalerEquipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)

DESTINATION ...Continued...0197 Panama


(Export) China:0072 China





A COMAR Net Charge for rust proofing will be added when this Code is ordered.Same Price

(Export) South America:0213 Chile


0214 ColumbiaA COMAR Net Charge for rust proofing will be added when this Code is ordered.

Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge

LANGUAGE AND DECALS0409 English (U.S./ Canada ONLY) In Base Price

0443 English/Spanish (U.S. ONLY)English and Spanish operator manuals and bilingual decals.

Same Price

0448 English (Export ONLY)English operator manual and text free decals.

Same Price


Same Price


Same Price

0426 ChineseChinese operator manual and text free decals.

Same Price

BALE CHUTES


328 Twine BalerContinued



SUGGESTEDLIST PRICE

USD ($)

BALE CHUTES ...Continued...2000 Side Drop Bale Chute 353.00

2010 Regular Bale Chute In Base Price

2095 Less Bale Chute -103.00

ATTACHMENTS - ORDER AS DESIRED

Bale Ejection:9003 Bale Ejector (Complete), Electric Distance and Tilt Controls

(English Decals)U.S. and Canada Markets.

9,405.00

9004 Bale Ejector (Complete), Electric Distance and Hydraulic Tilt ControlsIncluding Cylinder (English Decals)U.S. and Canada Markets.

8,902.00

9006 Bale Ejector (Complete), Electric Distance and Tilt Controls(No Text Decals)Export Markets Only.

9,405.00

9007 Bale Ejector (Complete), Electric Distance and Hydraulic Tilt ControlsIncluding Cylinder (No Text Decals)Export Markets Only.

8,902.00

Density Control:9030 Hydraulic Bale Tension 1,413.00

9020 Side Hay Resistor 43.00

Monitors/Displays/Controllers:9010 Bale Counter 61.00

Frame and Chassis:9035 Hydraulic Tongue Positioning Bracket

For Long Tongue only. Not compatible with Short Tongue.91.00

9050 Hydraulic Tongue Positioning CylinderFor Long Tongue only. Not compatible with Short Tongue.

388.00

Hitch and Drawbar:9000 Wagon Hitch, Center Telescoping with Bale Chute Extension 680.00

9001 Wagon Hitch, Remote Release 237.00

9005 Wagon Hitch, Center Telescoping with Support 536.00

Pickup:9015 Gauge Wheel and Support 139.00

9045 Hydraulic Pickup Lift 490.00





SUGGESTEDLIST PRICE

USD ($)


ALLIED SUPPLIER INFORMATIONFOR TWINE CONTACT:

AMBRACOP.O. Box 506Hwy. 61 & 155Dubuque, IA 52001Telephone: (800) 225-8946Fax: (563) 583-3531

FOR BALER'S CHOICE PRESERVATIVE AND PRESERVATIVE APPLICATOR:

Harvest Tec, Inc.P.O. Box 63Hudson WI 54016Telephone: (715) 386-9100 or (800) 635-7468Fax: (715) 386-9509

Refer to the Agricultural Sales Manual for Additional Information.

ATTACHMENTS FOR FIELD CONVERSION

Bale Ejection:BE21497 Bale Chute, Regular 125.40

BE21723 Bale Chute, Side Drop with Guide 551.10

BE32066 Bale Ejector (Complete), Electric Distance and Hydraulic Tilt ControlsIncluding Cylinder (English Decals)U.S. and Canada Markets.

9,792.20

BE32224 Bale Ejector (Complete), Electric Distance and Hydraulic Tilt ControlsIncluding Cylinder (No Text Decals)Export Markets Only.

9,792.20

BE32065 Bale Ejector (Complete), Electric Distance and Tilt Controls(English Decals)U.S. and Canada Markets.

10,345.50

BE32223 Bale Ejector (Complete), Electric Distance and Tilt Controls(No Text Decals)Export Markets Only.

10,345.50

BE23854 Bale Ejector, Distance Controls with Hydraulic Cylinder SupportsIncluded in BE32066 Bale Ejector (Complete)Requires BE21036 and BE22060 if ordered separately.

662.21

BE23853 Bale Ejector, Distance and Tilt ControlsIncluded in BE32065 Bale Ejector (Complete)To adapt controls to tractor 3-Terminal Convenience Outlet, order AE50531 Harness,Convenience Outlet from Parts.

1,662.10

BE21036 Bale Ejector, Hydraulic Cylinder for Tilt ControlIncluded in BE32066 Bale Ejector (Complete)

68.20


378.39





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BE21502 Bale Ejector, Wheel Extension - Left Side

Included in BE32065 or BE32066 Bale Ejector (Complete)373.19

Density Control:BE32064 Hydraulic Bale Tension 1,554.30

BE20120 Side Hay Resistor 47.30

Frame and Chassis:BE22078 Hydraulic Tongue Positioning Bracket

For Long Tongue only. Not compatible with Short Tongue.100.10

BE24273 Hydraulic Tongue Positioning CylinderFor Long Tongue only. Not compatible with Short Tongue.

426.80

Hitch and Drawbar:BE24261 Safety Chain for Towed Equipment, 20,000 Lb (90 kN) 88.00

BE21895 Wagon Hitch SupportIncluded in BE32065 or BE32066 Bale Ejector (Complete)

336.30

BE22065 Wagon Hitch, Center Telescoping with Bale Chute Extension 748.00

BE22074 Wagon Hitch, Center Telescoping with Support 548.43

BE22557 Wagon Hitch, Remote Release 260.70

Monitors/Displays/Controllers:BE23404 Bale Counter 67.10

Pickup:BE32309 Feeding Enhancement Kit

328, 338, and 348 Square Balers469.70

BE22172 Gauge Wheel and Support 152.90

BE24263 Hydraulic Pickup Lift 539.00

Twine System:BE21437 Multi-Luber 656.70









Powershaft with540 RPM PTO Sliding Collar Hookup,Long Tongue, Equal Angle Hitch,and Slip Clutch



11L-14 In. 6 PR Rib Implement Tireon Left Hand Side

26-12.00 12 In. 4 PR High FlotationTire on Right Hand Side



SUGGESTEDLIST PRICE

USD ($)



6014E 328 Twine Baler PR 20,299.00

DESTINATION





Same Price

PACKAGES0850 Bale Chutes

Side Drop Bale Chute, Regular Bale Chute, or Less Bale Chute (Codes 2000/2010/2095) willautomatically be added along with the associated incremental pricing for each.

In Configuration

BALE CHUTES2000 Side Drop Bale Chute 353.00





328 Twine Baler PREquipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)


Density Control:9020 Side Hay Resistor 43.00





Density Control:BE20120 Side Hay Resistor 47.30

Hitch and Drawbar:BE22065 Wagon Hitch, Center Telescoping with Bale Chute Extension 748.00


Pickup:BE22172 Gauge Wheel and Support 152.90


328 Twine Baler PRContinued



Powershaft with 540 RPM PTO SlidingCollar Hookup, Tongue, Equal AngleHitch and Slip Clutch



11L-14 In. 6 PR Rib ImplementTire on Left Hand Side

26-12.00-12 In. 4 PR High FlotationTire on Right Hand Side



SUGGESTEDLIST PRICE

USD ($)



6241E 338 Series Baler 22,360.00

DESTINATION






Net Item Charge




Net Item Charge


Net Item Charge


Net Item Charge

0197 PanamaA COMAR Net Charge for rust proofing will be added when this Code is ordered.

Net Item Charge


338 Series BalerEquipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)











Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge

0203 Puerto RicoA COMAR Net Charge for rust proofing will be added when this Code is ordered.

Net Item Charge

0182 BarbadosA COMAR Net Charge for rust proofing will be added when this Code is ordered.

Net Item Charge



Same Price


Same Price


Same Price


Same Price


338 Series BalerContinued



SUGGESTEDLIST PRICE

USD ($)

LANGUAGE AND DECALS ...Continued...0426 Chinese

Chinese operator manual and text free decals.Same Price




KNOTTER SYSTEM1000 Twine Knotters In Base Price

1020 Wire Knotters 2,019.00




9,405.00


8,902.00


9,405.00


8,902.00




Frame and Chassis:9050 Hydraulic Tongue Positioning Cylinder 388.00

9030 Hydraulic Tongue Positioning Bracket 91.00






SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS - ORDER AS DESIRED ...Continued...9001 Wagon Hitch, Remote Release 237.00













9,792.20


9,792.20

BE32065 Bale Ejector (Complete), Electric Distance and Tilt Controls(English Decals)U.S. and Canada Markets.

10,345.50


10,345.50

BE23854 Bale Ejector, Distance Controls with Hydraulic Cylinder SupportsIncluded in BE32066 Bale Ejector (Complete)Requires BE21036 and BE22060 if ordered separately.

662.21





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BE23853 Bale Ejector, Distance and Tilt Controls

Included in BE32065 Bale Ejector (Complete)To adapt controls to tractor 3-Terminal Convenience Outlet, order AE50531 Harness,Convenience Outlet from Parts.

1,662.10


68.20


378.39

BE21502 Bale Ejector, Wheel Extension - Left SideIncluded in BE32065 or BE32066 Bale Ejector (Complete)

373.19



Frame and Chassis:BE22078 Hydraulic Tongue Positioning Bracket 100.10

BE24273 Hydraulic Tongue Positioning Cylinder 426.80



336.30


















Powershaft with 540 RPM PTO SlidingCollar Hookup, Tongue, Equal AngleHitch and Slip Clutch







SUGGESTEDLIST PRICE

USD ($)



6242E 338 Series Baler PR 22,360.00

DESTINATION





Same Price

PACKAGES0850 Twine Knotter System and Bale Chute

Twine Knotter System, Side Drop Bale Chute, Regular Bale Chute, or Less Bale Chute (Codes1000, 2000/2010/2095) will automatically be added along with the associated incrementalpricing for each.

In Configuration




KNOTTER SYSTEM


338 Series Baler PREquipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)

KNOTTER SYSTEM ...Continued...1000 Twine Baler Less Multi-Luber In Base Price










338 Series Baler PRContinued


14 x 18 In. Bale 12 to 50 In. LongRegular Bale Chute74 In. Pickup with 156 Teeth93 Strokes per Minute, 30 In. StrokesCategory 4, Three Joint Powershaft

with 540 RPM PTO Sliding CollarTelescoping Hookup, Tongue, EqualAngle Hitch and Slip Clutch

Support Bracket for Hydraulic Hoseand PTO Hookup

Pickup CompressorJackBale Counter



Plungerhead Extensions(Serial Number 843101 and Above)

Safety Chain


SUGGESTEDLIST PRICE

USD ($)



6251E 348 Series Baler 24,623.00

DESTINATION




Option Code includes a country specific requirement for Safety Shielding.A separate, additional COMAR Net Charge for rust proofing will be added when this Code isordered.

1,023.00

0237 New ZealandOption Code includes a country specific requirement for Safety Shielding.A separate, additional COMAR Net Charge for rust proofing will be added when this Code isordered.

1,023.00




Net Item Charge


Net Item Charge


Net Item Charge


348 Series BalerEquipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)

DESTINATION ...Continued...0197 Panama








(Export) South America:0213 Chile



Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge

0203 Puerto RicoA COMAR Net Charge for rust proofing will be added when this Code is ordered.

Net Item Charge

0182 BarbadosA COMAR Net Charge for rust proofing will be added when this Code is ordered.

Net Item Charge



Same Price


Same Price


Same Price


Same Price





SUGGESTEDLIST PRICE

USD ($)

LANGUAGE AND DECALS ...Continued...0426 Chinese

Chinese operator manual and text free decals.Same Price




KNOTTER SYSTEM1000 Twine Baler Less Multi-Luber In Base Price

1010 Twine Baler With Multi-Luber 543.00

1020 Wire Baler With Multi-Luber 2,019.00

DRIVES3000 Category 4, Three-Joint Powershaft with 540 RPM PTO Sliding Collar

Telescoping Hookup, Tongue, Equal Angle Hitch and Slip ClutchIn Base Price

3020 Category 5, Three-Joint Powershaft with 540 RPM PTO Sliding CollarTelescoping Hookup, Tongue, Equal Angle Hitch, Slip Clutch andBrackets for Hydraulic Tongue Positioning

731.00




9,405.00


8,902.00


9,405.00


8,902.00



Frame and Chassis:9035 Hydraulic Tongue Positioning Bracket 91.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS - ORDER AS DESIRED ...Continued...9050 Hydraulic Tongue Positioning Cylinder 388.00


9001 Wagon Hitch, Remote Release 237.00




Lighting:9030 Auxiliary Lights - 12 Volt 279.00










9,792.20


9,792.20





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BE32067 Bale Ejector (Complete), Electric Distance and Tilt Controls


10,345.50


10,345.50

BE23854 Bale Ejector, Distance Controls with Hydraulic Cylinder SupportsIncluded in BE32068 and Bale Ejector (Complete)Requires BE21036 and BE22060 if ordered separately.

662.21

BE23853 Bale Ejector, Distance and Tilt ControlsIncluded in BE32067 Bale Ejector (Complete)To adapt controls to tractor 3-Terminal Convenience Outlet, order AE50531 Harness,Convenience Outlet from Parts.

1,662.10


68.20


378.39

BE21023 Bale Ejector, Wheel Extension - Left SideIncluded in BE32067 or BE32068 Bale Ejector (Complete)

373.19



Frame and Chassis:BE22078 Hydraulic Tongue Positioning Bracket 100.10

BE24273 Hydraulic Tongue Positioning Cylinder 426.80



336.30




Lighting:BE21106 Auxiliary Lights - 12 Volt 306.90





SUGGESTEDLIST PRICE

USD ($)










14 x 18 In. Bale 12 to 50 In. LongRegular Bale Chute74 In. Pickup with 156 Teeth93 Strokes per Minute, 30 In. StrokesCategory 4, Three Joint Powershaft

with 540 RPM PTO Sliding CollarTelescoping Hookup, Tongue, EqualAngle Hitch and Slip Clutch

Support Bracket for Hydraulic Hoseand PTO Hookup

Pickup CompressorJackBale Counter



Plungerhead Extensions(Serial Number 843101 and Above)

Safety Chain


SUGGESTEDLIST PRICE

USD ($)



6252E 348 Series Baler PR 24,623.00

DESTINATION





Same Price

PACKAGES0850 Twine Knotter System, Bale Chute, Cat. 4 Hookup or Cat. 5 Hookup

Twine Knotter System, Side Drop Bale Chute, Regular Bale Chute, or Less Bale Chute, Cat. 4Hookup, or Cat. 5 Hookup (Codes 1000, 2000/2010/2095, 3000/3020) will automatically beadded along with the associated incremental pricing for each.

In Configuration

0851 Twine Knotter System with Multi-Luber, Bale Chute, Cat. 4 Hookup or Cat. 5 HookupTwine Knotter System, Side Drop Bale Chute, Regular Bale Chute, or Less Bale Chute, Cat. 4Hookup, or Cat. 5 Hookup (Codes 1010, 2000/2010/2095, 3000/3020) will automatically beadded along with the associated incremental pricing for each.

In Configuration

0852 Wire Knotter System with Multi-Luber, Bale Chute, Cat. 4 Hookup or Cat. 5 HookupWire Knotter System, Side Drop Bale Chute, Regular Bale Chute, or Less Bale Chute, Cat. 4Hookup, or Cat. 5 Hookup (Codes 1020, 2000/2010/2095, 3000/3020) will automatically beadded along with the associated incremental pricing for each.

In Configuration


348 Series Baler PREquipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)




KNOTTER SYSTEM1000 Twine Baler Less Multi-Luber In Base Price

1010 Twine Baler With Multi-Luber 543.00

1020 Wire Baler With Multi-Luber 2,019.00

DRIVES3000 Category 4, Three-Joint Powershaft with 540 RPM PTO Sliding Collar

Telescoping Hookup, Tongue, Equal Angle Hitch and Slip ClutchIn Base Price

3020 Category 5, Three-Joint Powershaft with 540 RPM PTO Sliding CollarTelescoping Hookup, Tongue, Equal Angle Hitch, Slip Clutch andBrackets for Hydraulic Tongue Positioning

731.00








348 Series Baler PRContinued


CutterbarOil Immersed Gear Driven Cutting Bed with 3.1 m (10ft 2 in) Cutting Width8 Oval Shaped Low Profile Discs with 2986 rpm SpeedTwo Reversible and Retractable Knives on each DiscCutting Height 30 - 80 mm (1.2 - 3.2 in)

Conditioner2.64 m (8 ft 8 in) Wide Rotor with 54 Free SwingingSteel V-TinesBelt Driven with Two Speeds - 888 rpm (factorysetting) or 615 rpmAdjustable (2 x 6 Positions) Conditioning Hood

WindrowSwath Width 1.4 - 2 m (4 ft 7 in to 6 ft 7 in)

Drive1-3/8 in (34.9 mm) 21-Spline Driveline1-3/4 in (44.5 mm) 20-Spline Yoke Available ThroughParts1000 rpm with Friction Slip ClutchClockwise PTO Input (factory setting), Convertibleto Counter Clockwise

ChassisA-Frame Mounting System

A-Frame Adapter (Category 2)Adjustable Hydro Pneumatic Suspension SystemLift Cylinder works with Tractor Hydraulics toMaximize Ground ClearanceBreakaway System to Protect Cutting Bed & AllowContinual WorkTransport Lock StandardMaximum Transport Width 3.1m (10 ft 2 in)Weight 1310 kg (2888 lb)

MiscellaneousOperators ManualToolbox

Recommended Tractor SpecificationsPTO Power 100 HP (75 kW)Front Hitch with Downstop Chain Supports or Returnto Position HitchOne Single Acting Front SCV (Independent of FrontHitch)Auxiliary Driving Lights/Loader Light Kit


SUGGESTEDLIST PRICE

USD ($)



0650XF 131 Front Mower-ConditionerTractor should be equipped with Auxiliary Driving/Loader Light Kit.Front-mount MoCo must be operated by an SCV with float position that is independent of frontlift cylinders.

24,445.00

SPECIAL EQUIPMENT - FACTORY INSTALLED8159 131 Flow Limiter 95.00

8160 131 Head Transport Stop 210.00


Wide Spread Kits:9100 Wide Spread Kit for 131 Front Mower-Conditioner 626.00

Operators Manual and Decals:9200 French Operator's Manual and Decals No Charge

9300 Spanish Operator's Manual and Decals No Charge


131 Front Mower-ConditionerEquipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)


Wide Spread Kits:5KN1076350 Wide Spread Kit for 131 Front Mower-Conditioner 626.00


131 Front Mower-ConditionerContinued


Cutterbar2 Oil Immersed Gear Driven Cutting Beds Providing8.7 m (28 ft 8 in) Cutting Width

(Includes 131 Front Moco)2 x 8 Oval Shaped Low Profile Discs with 2986 rpmSpeedTwo Reversible and Retractable Knives on each DiscCutting Height 30 - 80 mm (1.2 - 3.2 in)Conditioner2 x 2.64 m (8 ft 8 in) Wide Rotor with 54 FreeSwinging Steel V-TinesBelt Driven with Two Speeds - 888 rpm (factorysetting) or 615 rpmAdjustable (2 x 6 Positions) Conditioning HoodWindrow2x Adjustable Swath Width 1.2 to 2.5 m (4 ft to 8ft 2 in)Drive1-3/4 in (44.5 mm) 20-Spline Driveline1000 rpm with Overrunning and Slip ClutchProtectionChassisAdjustable Hydro Pneumatic Suspension System withIndependent Settings for each UnitIndependent Breakaway System

Machine Offset Controlled From Cab: 270 mm (10.6in) Left or RightMachine Overlap Between Front and Rear CuttingPlatforms 0.3 m (1 ft) - 131/388 CombinationMaximum Transport Width 3.1 m (10 ft 2 in)Maximum Transport Height 4 m (13 ft 1 in)Weight 3132 kg (6905 lb)MiscellaneousOperators ManualOperators Manual ContainerTransport LightsToolboxRecommended Tractor SpecificationsPTO Power 190 HP (140 kW) - Includes 131 Front MocoCategory 3, 3-Point Hitch (3 And 4N Quick HitchCompatible)Electrical Outlet (7 Pin Connector)Two Double Acting SCV´s (1 with Float)131 Front Moco is Required


SUGGESTEDLIST PRICE

USD ($)



0381XF 388 Twin Rear Mower-Conditioner 64,346.00


Wide Spread Kits:9100 Wide Spread Kit for 388 Twin Rear Mower-Conditioner 295.00

Operators Manual and Decals:9200 French Operator's Manual and Decals No Charge

9300 Spanish Operator's Manual and Decals No Charge


Wide Spread Kits:5KN1076276 Wide Spread Kit for 388 Twin Rear Mower-Conditioner 295.00


388 Twin Rear Mower-ConditionerEquipment for Base Machine



388 Twin Rear Mower-ConditionerContinued



Impeller Conditioner Only8 Ft. 2 In. Cutting WidthLow-Profile Modular Cutterbar Made of

High-Strength Nodular Iron Castings5 Shear-Protected Cutting Disks with

Replaceable Heat Treated InsertsTwo Reversible Cutting Knives per DiskReplaceable Skid Plate Under Each

Cutting DiskAdjustable Gauge ShoesImpeller Conditioner:

33 Equally Spaced, V-tinesTwo-speed Conditioner DriveCrank Adjustable Conditioning Hood with Gauge

Clevis Hitch and Standard Tongue540 RPM ASAE Category 4 Telescoping

Hookup with Sliding Collar forTractors with 1-3/8 In. DiameterPTO Shaft

Overrunning DrivelineSlip Clutch3-V Power Band Belt Drive

No-Tools Cutterbar Flotation AdjustmentIntegral Hydraulic

Platform Lift System with Cylinders,Hoses and Breakaway Couplers

Hydraulic Platform Cylinder LockoutsScrew-Type JackNo-Tools Forming Shield AdjustmentAdjustable Cutterbar Angle-

TurnbuckleTwo Wheels with 11LX15, 8 PR

Hi-Flotation TiresHydraulic Tongue PositionerTransport Lock (Tongue)SMV SignFlashing Warning LightsSafety Chain

For protection from thrown objects, it is required that this Mower-Conditioner be used with a tractor equipped with a complete operator enclosure.


SUGGESTEDLIST PRICE

USD ($)



2130E 625 Side-Pull Rotary Mower-Conditioner with Impeller Conditioner 22,757.00

DESTINATION







0189 El SalvadorA COMAR Net Charge for rust proofing will be added when this Code is ordered.

Net Item Charge


Net Item Charge


625 Side-Pull Rotary Mower-Conditioner with Impeller ConditionerEquipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)

DESTINATION ...Continued...0193 Honduras



Net Item Charge


Net Item Charge



(Export) South America:0212 Brazil


0183 BelizeA COMAR Net Charge for rust proofing will be added when this Code is ordered.

Net Item Charge

0211 BoliviaA COMAR Net Charge for rust proofing will be added when this Code is ordered.

Net Item Charge


Net Item Charge



(Export) Asia:0109 Vietnam


LANGUAGE DECALS0409 English (U.S. / Canada ONLY) In Base Price


Same Price


Same Price

0413 French (Canada ONLY)Text free decals and French operator manual.

Same Price

0437 SpanishText free decals and Spanish operator manual.

Same Price

0430 PortugueseText free decals and Portuguese operator manual.

Same Price


625 Side-Pull Rotary Mower-Conditioner with Impeller ConditionerContinued



SUGGESTEDLIST PRICE

USD ($)

LANGUAGE DECALS ...Continued...0426 Chinese

Text free decals and Chinese operator manual.Same Price

HITCHTurn Limiters, order code 9000 or 9001, may be required for tractors having a hitch pointbeyond the rear drive wheels; EXCLUDING machines equipped with Rockshaft SwivelHitches. See "Attachments - Order as Desired" or Agricultural Sales Manual for additionalordering information.

2500 Clevis Hitch with Standard Tongue In Base Price

2510 Ball-Joint Hitch and Slip-On Drawbar Extension with Standard Tongue-540 RPM TractorHookup

328.00

TIRES AND WHEELS4000 11L X 15, 8 PR Hi-Flotation Wheels and Tires In Base Price

4010 31 X 13.5-15, 8 PR Hi-Flotation Wheels and Tires 505.00

CUTTERBAR ANGLE ADJUSTMENT5000 Turnbuckle Top Link In Base Price

5010 Hydraulic Tilt Control - IndependentRequires separate selective control valve. Total of three SCVs are required for operation.

326.00

REAR POWERLINE6500 Rear Powerline with Standard U-Joints In Base Price

6510 Rear Powerline with Single CV U-JointEnables platform to be repositioned, under power, for limited amounts of time.

706.00


Hitch and Drawbar:9000 Turn Limiters, Narrow 179.00

9001 Turn Limiters, Wide 272.00


This personal guided tour provides you with the unique opportunity to watch a similar machineto the one you are purchasing during its final stages of manufacturing. This tour will bescheduled in advance and can occur at your convenience during a 60 day window (30 daysprior to, or 30 days after your machine's expected warehouse date). For more information,visit www.deere.com/goldkey.

No Charge






SUGGESTEDLIST PRICE

USD ($)


Cutterbar:BE32040 Cutting Angle Adjustment, Hydraulic Tilt Control

Requires separate selective control valve. Total of three SCVs are required for operation.675.40

AFH200183 Cutting Angle Adjustment, Turnbuckle Top Link See Parts

CC104769 Gauge Shoe Extension - Four RequiredUsed to increase maximum cutting height.Also requires the following items from Parts for installation:

8-19M7790 Bolts (M12 X 35)8-14M7401 Lock Nuts

See Parts

Drivelines:BE10055 PTO Driveline, 540 RPM Telescoping Tractor Hookup for Ball-Joint Hitch

Gearcase must match RPM of tractor hookup.Used to convert standard tongue with 540 RPM Clevis Hitch.

687.50

BE10057 PTO Driveline, 540 RPM Telescoping Tractor Hookup for Clevis HitchGearcase must match RPM of tractor hookup.Used to convert standard tongue with 540 RPM Ball-Joint Hitch and Drawbar Extension.

687.50

BE32038 Rear PTO Driveline, 540 RPM with Single CV U-JointEnables platform to be repositioned, under power, for limited amounts of time.

1,948.10

BE32032 Rear PTO Driveline, 540 RPM with Standard U-Joints for Standard Tongue 1,093.40

Electrical:RE17282 7-Terminal Electrical Outlet Socket 90.20

Hitch and Drawbar:BE31176 Ball-Joint Hitch and Slip-On Drawbar Extension

Gearcase must match RPM of tractor hookup.Also requires BE10055, 540 RPM tractor hookup for Ball-Joint Hitch.Used to convert standard tongue with Clevis Hitch.

610.50

BE31153 Clevis HitchGearcase must match RPM of tractor hookup.Also requires BE10057, 540 RPM tractor hookup for Clevis Hitch.Used to convert standard tongue with Ball-Joint Hitch and Drawbar Extension.

213.40

PM03015 Quick Hitch Bushing - Two RequiredTo adapt swivel hitch for use with quik-coupler.

See Parts

BE23622 Rubber Drawbar Shield 51.70


BE31086 Turn Limiters, Narrow 196.90

BE31087 Turn Limiters, Wide 299.20





SUGGESTEDLIST PRICE

USD ($)


Operator Environment:TY15133 Fire Extinguisher Mounting Bracket


See Parts


See Parts








Impeller Conditioner Only8 Ft. 2 In. Cutting WidthLow-Profile Modular Cutterbar Made of




33 Equally Spaced, V-tinesTwo-speed Conditioner DriveCrank Adjustable Conditioning Hood with Gauge



Overrunning DrivelineSlip Clutch3-V Power Band Belt Drive

No-Tools Cutterbar Flotation AdjustmentIntegral Hydraulic

Platform Lift System with Cylinders,Hoses and Breakaway Couplers

Hydraulic Platform Cylinder LockoutsScrew-Type JackNo-Tools Forming Shield AdjustmentAdjustable Cutterbar Angle-

TurnbuckleTwo Wheels with 11LX15, 8 PR




SUGGESTEDLIST PRICE

USD ($)



2131E 625 Side-Pull Rotary Mower-Conditioner with Impeller Conditioner PR 22,757.00

DESTINATION




0413 French (Canada ONLY) Same Price


2500 Clevis Hitch with Standard Tongue and 1000 RPM Tractor Hookup,ASAE Category 4, 1-3/8 In. Diameter PTO Shaft

In Base Price

2510 Ball-Joint Hitch and Slip-On Drawbar Extension with Standard Tongue-540 RPM Tractor 328.00


625 Side-Pull Rotary Mower-Conditioner with Impeller Conditioner PREquipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)

HITCH ...Continued...Hookup




5010 Hydraulic Tilt Control - Independent 326.00


6510 Rear Powerline with Single CV U-Joint 706.00

PACKAGES

625 Rotary Mower-Conditioner PR Packages:0850 540 RPM Impeller Conditioner Package

Requires manual selection from the Hitch, Tires and Wheels, Cutterbar Angle, and RearPowerline sections.

In Configuration


625 Side-Pull Rotary Mower-Conditioner with Impeller Conditioner PRContinued


Impeller Conditioner or UrethaneRoll Optional

9 Ft. 9 In. (3M) Cutting WidthLow-profile, Modular Cutterbar

Made of High-Strength NodularIron Castings

6 Shear-Protected Cutting Diskswith Replaceable HeatTreated Inserts

Two reversible Cutting KnivesPer Disk

Replaceable Skid Plate undereach Cutting Disk

Adjustable Gauge ShoesImpeller Conditioner:

45 Equally Spaced V-TinesTwo-Speed Conditioner DriveCrank AdjustableConditioning Hood with Gauge



Overrunning Driveline3-V Power Band Belt DriveNo-Tools Cutterbar Flotation AdjustmentIntegral Hydraulic Platform

Lift System with Cylinders,Hoses, and Breakaway Couplers

Hydraulic Platform Cylinder LockoutsScrew-Type JackNo-Tools Forming Shield AdjustmentAdjustable Cutterbar Angle-TurnbuckleTwo Wheels with 11L X 15 8 PR




SUGGESTEDLIST PRICE

USD ($)



2140E 630 Side-Pull Rotary Mower-Conditioner 26,370.00

DESTINATION








Net Item Charge


Net Item Charge


630 Side-Pull Rotary Mower-ConditionerEquipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)




Net Item Charge


Net Item Charge






Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge







Same Price


630 Side-Pull Rotary Mower-ConditionerContinued



SUGGESTEDLIST PRICE

USD ($)

LANGUAGE DECALS ...Continued...0448 English (Export ONLY)

English operator manual and text free decals.Same Price


Same Price


Same Price


Same Price

0426 ChineseText free decals and Chinese operator manual.

Same Price

PACKAGES

Impeller Conditioner Packages:0902 540 RPM Impeller Conditioner Package

Codes 1000 and 1510 will automatically be added along with the associated incrementalpricing for each.Requires manual selection from the Hitch; Tires and Wheels; Cutterbar Angle; and RearPowerline sections.

In Configuration

0901 1000 RPM Impeller Conditioner PackageCodes 1000 and 1500 will automatically be added along with the associated incrementalpricing for each.Requires manual selection from the Hitch; Tires and Wheels; Cutterbar Angle; and RearPowerline sections.

In Configuration

Roll Conditioner Packages:0912 540 RPM Urethane Roll Conditioner Package

Codes 1010 and 1510 will automatically be added along with the associated incrementalpricing for each.Requires manual selection from the Hitch; Tires and Wheels; Cutterbar Angle; and RearPowerline sections.

In Configuration

0911 1000 RPM Urethane Roll Conditioner PackageCodes 1010 and 1500 will automatically be added along with the associated incrementalpricing for each.Requires manual selection from the Hitch; Tires and Wheels; Cutterbar Angle; and RearPowerline sections.

In Configuration


2500 Clevis Hitch with Standard TongueCANNOT be converted to Rockshaft Swivel Hitch.

In Base Price

2510 Ball-Joint Hitch and Slip-On Drawbar Extension with Standard Tongue-540 RPM TractorHookupCANNOT be converted to Rockshaft Swivel Hitch.

328.00





SUGGESTEDLIST PRICE

USD ($)

HITCH ...Continued...

2520 Rockshaft Swivel Hitch and TongueCode 2520 is for Category 2 or 3N, three-point hitch with or without Quick-Coupler.Includes Downstop Chain.CANNOT be converted to Standard Tongue.

1,794.00





326.00



706.00

CONDITIONER1000 Impeller Conditioner In Base Price

1010 Urethane Roll Conditioner74 In. Long with Recessed Intermittent Cleats - 10 In. Diameter.Quick-Adjust Roll Spacing.Adjustable Roll Pressure independent of Float Pressure.

1,425.00

TRACTOR HOOKUPMower-Conditioner is shipped with Gearcase RPM matching the PTO Hookup ordered.Gearcase Speed CANNOT be converted.

1500 1000 RPM Tractor Hookup, ASAE Category 4,1-3/8 In. Diameter PTO Shaft

In Base Price

1510 540 RPM Tractor Hookup, ASAE Category 4,1-3/8 In. Diameter PTO ShaftNot compatible with Swivel Hitch Code 2520.

266.00







SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS - ORDER AS DESIRED ...Continued...9001 Turn Limiters, Wide 272.00



No Charge







See Parts

Drivelines:BE10056 PTO Driveline, 1-3/8 In. 1000 RPM Telescoping Tractor Hookup

for Ball-Joint HitchGearcase must match RPM of tractor hookup.Used to convert standard tongue with 1000 RPM Clevis Hitch.

687.50

BE10058 PTO Driveline, 1-3/8 In. 1000 RPM Telescoping Tractor Hookupfor Clevis HitchGearcase must match RPM of Tractor Hookup.Used to convert standard tongue with 1000 RPM Ball-Joint Hitch and Drawbar Extension.

687.50

BE32031 PTO Driveline, 1-3/8 In. 1000 RPM Telescoping Tractor Hookupfor Swivel Hitch

600.60

BE10055 PTO Driveline, 540 RPM Telescoping Tractor Hookup for Ball-Joint HitchGearcase must match RPM of tractor hookup.Used to convert standard tongue with 540 RPM Clevis Hitch.

687.50

BE10057 PTO Driveline, 540 RPM Telescoping Tractor Hookup for Clevis HitchGearcase must match RPM of tractor hookup.Used to convert standard tongue with 540 RPM Ball-Joint Hitch and Drawbar Extension.

687.50


1,632.40

BE32033 Rear PTO Driveline, 1000 RPM with Standard U-Joints for Standard Tongue 781.00

BE32035 Rear PTO Driveline, 1000 RPM with Standard U-Joints for Swivel Tongue 781.00


1,948.10





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BE32032 Rear PTO Driveline, 540 RPM with Standard U-Joints for Standard Tongue 1,093.40



Gearcase must match RPM of tractor hookup.Also requires BE10056, 1000 RPM tractor hookup for Ball-Joint Hitch OR BE10055, 540RPM tractor hookup for Ball-Joint Hitch.Used to convert standard tongue with Clevis Hitch.

610.50

BE31153 Clevis HitchGearcase must match RPM of tractor hookup.Also requires BE10058, 1000 RPM tractor hookup for Clevis Hitch OR BE10057, 540 RPMtractor hookup for Clevis Hitch.Used to convert standard tongue with Ball-Joint Hitch and Drawbar Extension.

213.40


See Parts







See Parts


See Parts





9 Ft. 9 In. (3M) Cutting WidthLow-profile, Modular Cutterbar



Two reversible Cutting KnivesPer Disk

Replaceable Skid Plate undereach Cutting Disk











SUGGESTEDLIST PRICE

USD ($)



2141E 630 Side-Pull Rotary Mower-Conditioner PR 26,370.00

DESTINATION





Same Price



630 Side-Pull Rotary Mower-Conditioner PREquipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)

HITCH ...Continued...2500 Clevis Hitch with Standard Tongue

CANNOT be converted to Rockshaft Swivel Hitch.In Base Price

2510 Ball-Joint Hitch and Slip-On Drawbar Extension with Standard Tongue-540 RPM TractorHookupCANNOT be converted to Rockshaft Swivel Hitch.

328.00





326.00



706.00

PACKAGES

630 Rotary Mower-Conditioner PR Packages:0850 540 RPM Impeller Conditioner Package

Codes 1000 and 1510 will automatically be added along with the associated incrementalpricing for each.


In Configuration

0851 540 RPM Roll Conditioner PR PackageCodes 1010 and 1510 will automatically be added along with the associated incrementalpricing for each.


In Configuration



1,425.00


630 Side-Pull Rotary Mower-Conditioner PRContinued



SUGGESTEDLIST PRICE

USD ($)

TRACTOR HOOKUPMower-Conditioner is shipped with Gearcase RPM matching the PTO Hookup ordered.Gearcase Speed CANNOT be converted.

1510 540 RPM Tractor Hookup, ASAE Category 4,1-3/8 In. Diameter PTO ShaftNot compatible with Swivel Hitch Code 2520.

266.00









11 Ft. 6 In. (3.5M) Cutting WidthLow-Profile Modular Cutterbar



Two Reversible Cutting KnivesPer Disk

Replaceable Skid Plate UnderEach Cutting Disk


57 Equally Spaced V-TinesTwo-Speed Conditioner DriveCrank Adjustable ConditioningHood with Gauge









SUGGESTEDLIST PRICE

USD ($)



2150E 635 Side-Pull Rotary Mower-Conditioner 29,607.00

DESTINATION








Net Item Charge


Net Item Charge


635 Side-Pull Rotary Mower-ConditionerEquipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)




Net Item Charge


Net Item Charge






Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge







Same Price


Same Price


Same Price


Same Price





SUGGESTEDLIST PRICE

USD ($)

LANGUAGE DECALS ...Continued...0430 Portuguese

Text free decals and Portuguese operator manual.Same Price


Same Price

PACKAGES


Code 1000 will automatically be added along with the associated incremental pricing.Requires manual selection from the Hitch; Tires and Wheels; Cutterbar Angle; and RearPowerline sections.

In Configuration


Code 1010 will automatically be added along with the associated incremental pricing.Requires manual selection from the Hitch; Tires and Wheels; Cutterbar Angle; and RearPowerline sections.

In Configuration


2500 Clevis Hitch with Standard Tongue and 1000 RPM Tractor Hookup,ASAE Category 4, 1-3/8 In. Diameter PTO ShaftCANNOT be converted to Rockshaft Swivel Hitch.

In Base Price

2510 Ball-Joint Hitch and Slip-On Drawbar Extension with Standard Tongue and1000 RPM Tractor Hookup, ASAE Category 4, 1-3/8 In. Diameter PTO ShaftCANNOT be converted to Rockshaft Swivel Hitch.

328.00

2520 Rockshaft Swivel Hitch and tongue with 1000 RPM Tractor Hookup,ASAE Category 4, 1-3/8 In. Diameter PTO ShaftCode 2520 is for Category 2 or 3N, three-point hitch with or without Quick-Coupler.Includes Downstop Chain.CANNOT be converted to Standard Tongue.

1,794.00





326.00





SUGGESTEDLIST PRICE

USD ($)



706.00



1,726.00






No Charge







See Parts


for Ball-Joint HitchUsed to convert standard tongue with 1000 RPM Clevis Hitch.

687.50

BE10058 PTO Driveline, 1-3/8 In. 1000 RPM Telescoping Tractor Hookupfor Clevis HitchUsed to convert standard tongue with 1000 RPM Ball-Joint Hitch and Drawbar Extension.

687.50





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BE32031 PTO Driveline, 1-3/8 In. 1000 RPM Telescoping Tractor Hookup

for Swivel Hitch600.60


1,632.40

BE32033 Rear PTO Driveline, 1000 RPM with Standard U-Joints for Standard Tongue 781.00

BE32035 Rear PTO Driveline, 1000 RPM with Standard U-Joints for Swivel Tongue 781.00



Gearcase must match RPM of tractor hookup.Also requires BE10056, 1000 RPM tractor hookup for Ball-Joint Hitch.Used to convert standard tongue with 1000 RPM Clevis Hitch.

610.50

BE31153 Clevis HitchGearcase must match RPM of tractor hookup.Also requires BE10058, 1000 RPM tractor hookup for Clevis Hitch.Used to convert standard tongue with Ball-Joint Hitch and Drawbar Extension.

213.40


See Parts







See Parts


See Parts









9 Ft. 9 In. (3 m) Cutting WidthLow-Profile, Modular Cutterbar Made of





Ball-Joint Hitch and Slip-On DrawbarExtension with Standard Tongue

1000 RPM ASAE Category 5 TelescopingHookup with Sliding Collar forTractors with 1-3/8 In. Diameter

PTO ShaftOverrunning Driveline3-V Power Band Belt DriveNo-Tools Cutterbar Flotation AdjustmentScrew-Type JackNo-Tools Forming Shield AdjustmentAdjustable Cutterbar Angle - TurnbuckleTwo Wheels with 11L X 15,

8 PR Hi-Flotation TiresTransport Lock (Tongue)Hydraulic Cylinders (Both Lift and Pivot)Hydraulic Platform Cylinder LockoutsSMV SignFlashing Warning LightsSafety Chain



SUGGESTEDLIST PRICE

USD ($)



2160E 830 Center-Pivot Rotary Mower-Conditioner 30,933.00

DESTINATION



(Export) Oceania:0230 Australia






LANGUAGE AND DECALS


830 Center-Pivot Rotary Mower-ConditionerEquipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)

LANGUAGE AND DECALS ...Continued...0409 English (U.S. / Canada ONLY) In Base Price


Same Price


Same Price


Same Price


Same Price

PACKAGES


Codes 1000 and 1510 will automatically be added along with the associated incrementalpricing for each.Requires manual selection from the Hitch; Tires and Wheels; and Cutterbar Angle sections.

In Configuration

0901 1000 RPM Impeller Conditioner PackageCodes 1000 and 1500 will automatically be added along with the associated incrementalpricing for each.Requires manual selection from the Hitch; Tires and Wheels; and Cutterbar Angle sections.

In Configuration


Codes 1010 and 1510 will automatically be added along with the associated incrementalpricing for each.Requires manual selection from the Hitch; Tires and Wheels; and Cutterbar Angle sections.

In Configuration

0911 1000 RPM Urethane Roll Conditioner PackageCodes 1010 and 1500 will automatically be added along with the associated incrementalpricing for each.Requires manual selection from the Hitch; Tires and Wheels; and Cutterbar Angle sections.

In Configuration


1010 Urethane Roll Conditioner74 In. long with Recessed Intermittent Cleats - 10 In. Diameter.Quick-Adjust Roll Spacing.Adjustable Roll Pressure independent of Float Pressure.

1,425.00

TRACTOR HOOKUPMower-Conditioner is shipped with Gearcase positioned to match the PTO Hookup ordered.

Gearcase speed CANNOT be converted.

1500 1000 RPM Tractor Hookup, ASAE Category 5, 1-3/8 In. Diameter PTO Shaft In Base Price


830 Center-Pivot Rotary Mower-ConditionerContinued



SUGGESTEDLIST PRICE

USD ($)

TRACTOR HOOKUP ...Continued...

1510 540 RPM Tractor Hookup, ASAE Category 5, 1-3/8 In. Diameter PTO ShaftNot compatible with Swivel Hitch Code 2520.

262.00

TONGUE AND HITCHTurn Limiters, order code 9000 or 9001, may be required for tractors having a hitch pointbeyond the rear drive wheels; EXCLUDING machines equipped with Rockshaft SwivelHitches. See "Attachments - Order as Desired" or Agricultural Sales Manual for additionalordering information.

2500 Ball-Joint Hitch and Slip-On Drawbar Extension with Standard Tongue1) Code 2500 includes a 10,000 lb. (45kN) Safety Chain to be used as anAuxiliary Attaching System to the tractor.2) CANNOT be converted to Rockshaft Swivel Hitch.

In Base Price

2520 Rockshaft Swivel Hitch and Tongue1) Code 2520 is for Category 2 or 3N, three-point hitch with or without Quik-Coupler.2) Includes Downstop Chain.3) CANNOT be converted to Drawbar Ball-Joint Hitch.

1,479.00



CUTTERBAR ANGLE ADJUSTMENT5000 Turnbuckle Cutterbar Angle Adjustment In Base Price

5010 Hydraulic Tilt Control - IndependentRequires separate selective control valve. Total of Three SCVs are required for operation.

326.00






No Charge






SUGGESTEDLIST PRICE

USD ($)




DC200311 Cutting Angle Adjustment, Turnbuckle Top Link See Parts



See Parts


Hitch and Drawbar:PM03015 Quick Hitch Bushing - Two Required

To adapt swivel hitch for use with quik-coupler.See Parts







See Parts


See Parts





11 Ft. 6 In. (3.5 m) Cutting WidthLow-Profile, Modular Cutterbar


7 Shear-Protected CuttingDisks with Replaceable HeatTreated Inserts

Two Reversible Cutting Knivesper Disk





1000 RPM ASAE Category 5 TelescopingHookup with Sliding Collar for

Tractors with 1-3/8 In. DiameterPTO Shaft

Overrunning Driveline3-V Power Band Belt DriveNo-Tools Forming Shield AdjustmentScrew-Type JackNo-Tools Forming Shield AdjustmentAdjustable Cutterbar Angle - TurnbuckleTwo Wheels with 11L X 15,




SUGGESTEDLIST PRICE

USD ($)




DESTINATION






Net Item Charge

LANGUAGE AND DECALS0409 English (U.S. / Canada ONLY) In Base Price


Same Price

0448 English (Export ONLY) Same Price





SUGGESTEDLIST PRICE

USD ($)

LANGUAGE AND DECALS ...Continued...English operator manual and text free decals.


Same Price


Same Price

PACKAGES


Code 1000 will automatically be added along with the associated incremental pricing.Requires manual selection from the Hitch; Tires and Wheels; and Cutterbar Angle sections.

In Configuration


Code 1010 will automatically be added along with the associated incremental pricing.Requires manual selection from the Hitch; Tires and Wheels; and Cutterbar Angle sections.

In Configuration


1010 Urethane Roll Conditioner93 In. Long with recessed intermittent Cleats - 10 In. Diameter.Quick-Adjust Roll Spacing.Adjustable Roll Pressure independent of Float Pressure.

1,726.00



In Base Price


1,479.00







SUGGESTEDLIST PRICE

USD ($)



326.00






No Charge




DC200311 Cutting Angle Adjustment, Turnbuckle Top Link See Parts



See Parts


Hitch and Drawbar:PM03015 Quick Hitch Bushing - Two Required

To adapt swivel hitch for use with quik-coupler.See Parts









SUGGESTEDLIST PRICE

USD ($)




See Parts


See Parts




Impeller Conditioner11 Ft. 6 In. (3.5 m) Cutting WidthLow-Profile, Modular Cutterbar



Two Reversible Cutting Knivesper Disk





1000 RPM ASAE Category 5 TelescopingHookup with Sliding Collar for

Tractors with 1-3/8 In. DiameterPTO Shaft

Overrunning Driveline3-V Power Band Belt DriveNo-Tools Forming Shield AdjustmentScrew-Type JackNo-Tools Forming Shield AdjustmentAdjustable Cutterbar Angle - TurnbuckleTwo Wheels with 11L X 15,



SUGGESTEDLIST PRICE

USD ($)



2171E 835 Center-Pivot Rotary Mower-Conditioner PR 33,738.00

DESTINATION





Same Price

PACKAGES

835 Rotary Mower-Conditioner PR Package:0850 1000 RPM Impeller Conditioner Package

Code 1000 will automatically be added along with the associated incremental pricing.Requires manual selection fromthe Hitch; Tires and Wheels; and Cutterbar Angle sections.

In Configuration


835 Center-Pivot Rotary Mower-Conditioner PREquipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)




In Base Price


1,479.00





326.00


835 Center-Pivot Rotary Mower-Conditioner PRContinued


Impeller Conditioner - Urethane, V10Steel or Tri-Lobe Steel Roll Optional

Center-Pivot Design13 Ft. (4.0 m) Cutting WidthLow-Profile, Modular Cutterbar Made of


Replaceable Heat Treated InsertsTwo Reversible Cutting Knives Per DiskReplaceable Skid Plate Under Each

Cutting DiskMechanical Drive1000 RPM ASAE Category 5 Telescoping

Tractor Hookup with Lock Back Collarfor Tractors with 1-3/8 In. DiameterPTO Shaft

Overrunning Driveline3-V Power Band Belt DriveTwo Wheels with 12.5L x 15, 8PR

Hi-Flotation TiresRight Hand and Left Hand

Adjustable Gauge ShoesQuick-Adjust Platform FloatSwivel Hitch

(Compatible with Cat. 2 or3N, Three Point Hitch with or withoutQuik-Coupler)

Adjustable Cutterbar AngleHydraulic Cylinders

(Both Lift and Pivot)Adjustable SwathboardTransport Lock (Tongue)Platform Cylinder LocksSMV SignTransport Warning Lights

Impeller Conditioner:Two-Speed Conditioner Drive4-V Power Band Belt Drive72 V-Shaped TinesLever Adjustable Conditioning Hood



SUGGESTEDLIST PRICE

USD ($)




DESTINATION






Net Item Charge







SUGGESTEDLIST PRICE

USD ($)






Same Price


Same Price

0413 French (Canada ONLY)French operator manual and text free decal.

Same Price


Same Price

PACKAGES0901 Impeller Conditioner Package

Order Code 1000 will automatically be added along with the associated incremental pricing.Requires manual selection from Swivel Hitch section and Cutterbar Angle Adjustment section.

In Configuration

0911 Urethane Roll Conditioner PackageOrder Code 1010 will automatically be added along with the associated incremental pricing.Requires manual selection from Swivel Hitch section and Cutterbar Angle Adjustment section.

In Configuration

0921 V10 Steel Roll Conditioner PackageOrder Code 1025 will automatically be added along with the associated incremental pricing.Requires manual selection from Swivel Hitch section and Cutterbar Angle Adjustment section.

In Configuration

0931 Tri-Lobe Steel Roll Conditioner PackageOrder Code 1030 will automatically be added along with the associated incremental pricing.Requires manual selection from Swivel Hitch section and Cutterbar Angle Adjustment section.

In Configuration


1010 Urethane Roll Conditioner106 In. (2680 mm) long with recessed intermittent cleats - 10 In. (254 mm) diameterQuick-Adjust Roll SpacingAdjustable Roll PressureCushioned Roll Stops4-V Power Band Belt DriveGear and Shaft Driven Conditioner Rolls

1,657.00

1025 V10 Steel Roll Conditioner106 In. (2680 mm) long with ten intermeshing flutes in V-pattern - 10 In. (254 mm) diameter4-V powerband belt to gearcaseShaft drive to conditionerQuick-Adjust Roll SpacingAdjustable Roll Pressure

2,516.00





SUGGESTEDLIST PRICE

USD ($)

CONDITIONER ...Continued...Cushioned Roll Stops

1030 Tri-Lobe Steel Roll Conditioner106 In. (2680 mm) long with three continuous contact intermeshing flutes - 10 In. (254 mm)diameter4-V powerband belt to gearcaseShaft drive to conditionerQuick-Adjust Roll SpacingAdjustable Roll PressureCushioned Roll Stops

11,231.00

SWIVEL HITCH2500 Rockshaft Swivel Hitch for Tractor with 1-3/8 In. Diameter PTO Shaft

1) For Category 2 or 3N, three-point hitch with or without Quik-Coupler.2) Safety Chain not required.3) CANNOT be converted to Drawbar Swivel Hitch.4) To convert to 1-3/4 In. Diameter PTO Shaft order the following items from PARTS:

1 - AE56235 Yoke1 - AC15878 Cross and Bearing Assembly

In Base Price

2510 Drawbar Swivel Hitch for Tractor with 1-3/8 In. Diameter PTO Shaft1) Includes a 10,000 lb (45kN) Safety Chain to be used as an Auxiliary

Attaching System to the Tractor.2) CANNOT be converted to Rockshaft Swivel Hitch.3) To convert to 1-3/4 In. Diameter PTO Shaft order the following items

from PARTS:1 - AE56235 Yoke1 - AC15878 Cross and Bearing Assembly

Same Price

CUTTERBAR ANGLE ADJUSTMENT5000 Turnbuckle Top Link with Adjusting Wrench In Base Price

5020 Hydraulic Tilt ControlRequires separate selective control valve. Total of Three SCV's are required for operation.

326.00


Hitch and Drawbar:9005 Hose Support for Quik-Coupler

Helps to prevent damage to hoses when using Quik-Coupler.95.00



No Charge






SUGGESTEDLIST PRICE

USD ($)


Conditioner:AE54912 Lower Roll Shield

1) Helps prevent wrapping of lower roll in heavy, viney type crops such as Cali or Star Grass.2) Also requires the following items from Parts for installation:

2-19M7788 Hex Head Flange Bolt (M12 X 25)2-E63527 Spinlock Nut (M12)2-03M7197 Carriage Bolt (M12 X 25)

See Parts


Requires separate selective control valve. Three SCVs are required when machine is equippedwith Hydraulic Tilt Control.

675.40

BE23921 Cutting Angle Adjustment, Turnbuckle Top Link 281.60

Driveline Conversions - To 1-3/4 In. 1000 RPM from 1-3/8 In. 1000 RPM:See Service Parts to confirm application. In case of conflicting information, Service Partsinformation supersedes that below.

AE56235 Front Yoke with Lockback Collar, 1-3/4 In. 1000 RPMRequires AC15878, U-Joint Assembly from Parts.

See Parts



See Parts


Hitch and Drawbar:BE23877 Hose Support for Quik-Coupler





See Parts


See Parts




Impeller Conditioner or V10 Steel RollsCenter-Pivot Design13 Ft. (4.0 m) Cutting WidthLow-Profile, Modular Cutterbar Made ofHigh-Strength Nodular Iron Castings

8 Shear-Protected Cutting Disks withReplaceable Heat Treated Inserts

Two Reversible Cutting Knives Per DiskReplaceable Skid Plate Under EachCutting Disk

Mechanical Drive1000 RPM ASAE Category 5 TelescopingTractor Hookup with Lock Back Collarfor Tractors with 1-3/8 In. DiameterPTO Shaft

Overrunning Driveline3-V Power Band Belt DriveTwo Wheels with 12.5L x 15, 8PRHi-Flotation Tires

Right Hand and Left HandAdjustable Gauge Shoes

Quick-Adjust Platform FloatSwivel Hitch

(Compatible with Cat. 2 or3N, Three Point Hitch with or withoutQuik-Coupler)


(Both Lift and Pivot)Adjustable SwathboardTransport Lock (Tongue)Platform Cylinder LocksSMV SignTransport Warning Lights




SUGGESTEDLIST PRICE

USD ($)




DESTINATION





Same Price

PACKAGES


Code 1000 will automatically be added along with the associated incremental pricing.Requires manual selection from the Hitch, Tires and Wheels, and Cutterbar Angle sections.

In Configuration





SUGGESTEDLIST PRICE

USD ($)

PACKAGES ...Continued...0851 1000 RPM Steel Roll Conditioner Package


In Configuration


1025 V10 Steel Roll Conditioner106 In. (2680 mm) long with ten intermeshing flutes in V-pattern - 10 In. (254 mm) diameter4-V powerband belt to gearcaseShaft drive to conditionerQuick-Adjust Roll SpacingAdjustable Roll PressureCushioned Roll Stops

2,516.00




In Base Price




Same Price



326.00





Center-Pivot Design14 Ft. 6 In. (4.5 m) Cutting WidthLow-Profile, Modular Cutterbar





Mechanical Drive1000 RPM ASAE Category 5

Telescoping Tractor Hookup withLock Back Collar for Tractorswith 1-3/8 In. DiameterPTO Shaft

Overrunning Driveline3-V Power Band Belt DriveTwo Wheels with 31 X 13.5 - 15

8 PR Hi-Flotation TiresRight Hand and Left Hand

Adjustable Gauge Shoes


(Compatible with Cat. 2 or 3N,Three Point Hitch with or withoutQuik-Coupler)


(both Lift and Pivot)Adjustable SwathboardTransport Lock (Tongue)Platform Cylinder LocksSMV SignTransport Warning Lights




SUGGESTEDLIST PRICE

USD ($)




DESTINATION





(Export) South America:0220 Uruguay






SUGGESTEDLIST PRICE

USD ($)






0166 UkraineA COMAR Net Charge for rust proofing will be added when this Code is ordered.

Net Item Charge

0081 KazkhstanA COMAR Net Charge for rust proofing will be added when this Code is ordered.

Net Item Charge



Same Price


Same Price


Same Price


Same Price


Same Price

0445 Kazakhstan/RussianKazakhstan and Russian operator manual and text free decals.

Same Price

PACKAGES0901 Impeller Conditioner Package

Order Code 1000 will automatically be added along with the associated incremental pricing.Requires manual selection from Swivel Hitch section and Cutterbar Angle Adjustment section.

In Configuration

0911 Urethane Roll Conditioner PackageOrder Code 1010 will automatically be added along with the associated incremental pricing.Requires manual selection from Swivel Hitch section and Cutterbar Angle Adjustment section.

In Configuration

0921 V10 Steel Roll Conditioner PackageOrder Code 1025 will automatically be added along with the associated incremental pricing.Requires manual selection from Swivel Hitch section and Cutterbar Angle Adjustment section.

In Configuration

0931 Tri-Lobe Steel Roll Conditioner PackageOrder Code 1030 will automatically be added along with the associated incremental pricing.Requires manual selection from Swivel Hitch section and Cutterbar Angle Adjustment section.

In Configuration





SUGGESTEDLIST PRICE

USD ($)


1010 Urethane Roll Conditioner106 In. (2680 mm) long with recessed intermittent cleats - 10 In. (254 mm) diameterQuick-Adjust Roll SpacingAdjustable Roll PressureCushioned Roll Stops4-V Power Band Belt DriveGear and Shaft Driven Conditioner Rolls

355.00

1025 V10 Steel Roll Conditioner106 In. (2680 mm) long with ten intermeshing flutes in V-pattern - 10 In. (254 mm) diameter4-V powerband belt to gearcaseShaft drive to conditionerQuick-Adjust Roll SpacingAdjustable Roll PressureCushioned Roll Stops

1,214.00

1030 Tri-Lobe Steel Roll Conditioner106 In. (2680 mm) long with three continuous contact intermeshing flutes - 10 In. (254 mm)diameter4-V powerband belt to gearcaseShaft drive to conditionerQuick-Adjust Roll SpacingAdjustable Roll PressureCushioned Roll Stops

9,928.00




In Base Price




Same Price



326.00






SUGGESTEDLIST PRICE

USD ($)


Hitch and Drawbar:9005 Hose Support for Quik-Coupler




No Charge



1) Helps prevent wrapping of lower roll in heavy, viney type crops such as Cali or Star Grass.2) Also requires the following items from Parts for installation:


See Parts


Requires separate selective control valve. Three SCVs are required when machine is equippedwith Hydraulic Tilt Control.

675.40

BE23921 Cutting Angle Adjustment, Turnbuckle Top Link 281.60



See Parts



See Parts






SUGGESTEDLIST PRICE

USD ($)


Hitch and Drawbar:BE23877 Hose Support for Quik-Coupler





See Parts


See Parts









Center-Pivot Design14 Ft. 6 In. (4.5 m) Cutting WidthLow-Profile, Modular Cutterbar





Mechanical Drive1000 RPM ASAE Category 5

Telescoping Tractor Hookup withLock Back Collar for Tractorswith 1-3/8 In. DiameterPTO Shaft

Overrunning Driveline3-V Power Band Belt DriveTwo Wheels with 31 X 13.5 - 15

8 PR Hi-Flotation TiresRight Hand and Left Hand

Adjustable Gauge Shoes


(Compatible with Cat. 2 or 3N,Three Point Hitch with or withoutQuik-Coupler)


(both Lift and Pivot)Adjustable SwathboardTransport Lock (Tongue)Platform Cylinder LocksSMV SignTransport Warning Lights




SUGGESTEDLIST PRICE

USD ($)




DESTINATION





Same Price

PACKAGES





SUGGESTEDLIST PRICE

USD ($)




In Configuration





In Base Price




Same Price



326.00




3-Point Hitch7 Ft. 10 In. Width of Cut6-Disk Cutterbar with Externally

Removable Drive Disk BearingsLow Profile CutterbarOpen-Style Cutterbar EndSwath Wheel

Hydraulic Lift

For Additional Operator Protection From Thrown Objects, it is Recommended that the 265 Rotary Disk Mower be Used with Tractors Having an OperatorEnclosure.


SUGGESTEDLIST PRICE

USD ($)


BASE MACHINEEX-WORKS Point of entry

Dealers must order and have shipped in multiples of two.

1091E 265 Disk Mower (6 Disks) 12,006.00


Operator Environment:9928 French Operator Manual and Decals

For Field Conversions, Order Manual from Distribution Service Center and Decal Kit fromParts.

No Charge

9963 Spanish Operator Manual and DecalsFor Field Conversions, Order Manual from Distribution Service Center and Decal Kit fromParts.

No Charge


Cutterbar:AE55688 High Skid Shoe Kit

Requires (2) for new installation only.See Parts

Hitch and Drawbar:E92926 Extended Left Hand Hitch Pin See Parts

AE55657 Quik-Coupler BracketAlso order (2) E92291 bolt and (2) CC19337 nut.

See Parts


265 Disk Mower (6 Disks)Equipment for Base Machine



265 Disk Mower (6 Disks)Continued





Hydraulic Lift



SUGGESTEDLIST PRICE

USD ($)








No Charge


No Charge





AE55657 Quik-Coupler BracketAlso order (2) E92291 bolt and (2) CC19337 nut.

See Parts










Hydraulic Lift



SUGGESTEDLIST PRICE

USD ($)








No Charge


No Charge












John Deere 6.8 L (414 Cu. In.)Turbo-Charged 200 HP (149 kW) 6 Cyl.PowerTech E EngineTier III Emissions Compliant

Hydrostatic Ground Drive Heavy-Duty,Double Reduction Planetary Final Drives

Variable Drive MotorTransport: 0 to 21 mph (0 to 33.8 km/h)

Field: 0 to 16 mph (0 to 25.7 km/h)Drive Tires: 480/80R38 152A8

(R3) Button TiresRear Tires: 14L x 16.1 8PR Rib TiresAdjustable Rear Axle with

Independent Rear Suspension andSteering Assist

Tapered Main FrameTwo Exterior Rear View MirrorsRockshaft Platform LiftHydraulic Platform Float

(Adjustable from the Cab)Variable Speed Control for Rotary PlatformAdjustable Cutting Angle

(Hydraulically Adjusted from Cab)

CAB FEATURES:AutoTrac Universal (ATU) Ready*Honey Bee Draper Platform ReadyWindrow Merger Attachment ReadyLarge Approach Landing to CabTilt/Telescoping Steering WheelHeater/Air Conditioner with

Automatic Temperature ControlAutomatic Parking BrakeCAN-BUS Electrical SystemComfortCommand Adjustable Air

Suspension Seat and SeatbeltTraining Seat with Seat BeltRight-Hand Cornerpost Display: Warning

Display Panel Monitors Ten ItemsDigital Display of:Engine RPMGround Speed

Platform Float PressurePlatform HoursTraction Unit HoursPlatform Disk or Draper Reel SpeedFuel GaugeEngine Temperature Gauge

Master Control Lever:Engine Idle SpeedGround Speed Forward/ReversePlatform Raise/Lower, Tilt,Float Pressure, andDisk or Draper Reel Speed

AutoTrac Resume SwitchLess RadioSingle-Blade Windshield WiperExterior Lighting:

Six Cab Mounted HeadlampsTwo Rear FloodlampsFlashing Warning LightsTurn Signals

Electric Control Service CabinetAccess to Fuses and Relays

ToolboxHydraulic Service Cabinet for

Hydraulic Valves and FiltersHeavy-Duty Hydraulic Drive Motor

for PlatformRotary Wand Air Screen12-Volt Electrical System with

150 amp AlternatorOne, 925 CCA, Low Maintenance

StrongBox Battery125 Gallon (473 L) Fuel TankAnti-FreezeHydraulic OilLess Platform


SUGGESTEDLIST PRICE

USD ($)



BALLASTING RECOMMENDATIONS:For more information on ballasting recommendations, please visit the Ag Sales Manual.

6560E R450 Turbo-Diesel Self-Propelled Windrower Traction Unit 112,319.00

DESTINATION




R450 Turbo-Diesel Self-Propelled Windrower Traction UnitEquipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)

DESTINATION ...Continued...0195 Mexico Same Price


A COMAR Net Charge for rust proofing will be added when this code is ordered.Net Item Charge



0016 EgyptA COMAR Net Charge for rust proofing will be added when this code is ordered.

Net Item Charge

(Export) Asia:0072 China



A COMAR Net Charge for rust proofing, additional fuel filtration, license plate holder, andlabeling will be added when this code is ordered.

Net Item Charge

0166 UkraineA COMAR Net Charge for rust proofing, additional fuel filtration, license plate holder, andlabeling will be added when this code is ordered.

Net Item Charge

(Export) Middle East:0078 Israel




0220 UruguayA COMAR Net Charge for rust proofing will be added when this code is ordered.

Net Item Charge

0221 VenezuelaA COMAR Net Charge for rust proofing will be added when this code is ordered.

Net Item Charge



Same Price


Same Price

0413 French (Canada ONLY) Same Price


R450 Turbo-Diesel Self-Propelled Windrower Traction UnitContinued



SUGGESTEDLIST PRICE

USD ($)

LANGUAGE AND DECALS ...Continued...French operator manual and text free decals.


Same Price


Same Price


Same Price

0416 HebrewHebrew operator manual and text free decals.

Same Price

DRIVE WHEELS WITH TIRES3000 480/80R38 149A8 (R1) Radial Bar Tires

Recommended for maximum traction in muddy conditions, hills and draper applications.Same Price

3010 480/80R38 152A8 (R3) Radial Button TiresRecommended for minimum turf damage on hay crops. This tire option has very good tractioncharacteristics and performs similar to 23.1 x 26 bar tires on 4x95 series windrowers due tothe larger diameter and longer footprint on the ground.

In Base Price

BASE EQUIPMENT SUBSTITUTIONS - FACTORY INSTALLED6500 Less Platform Drive Motor and Tilt Cylinder

1) Recommended for DEDICATED conversions to competitive draper platforms.2) Not compatible with John Deere 600D Series draper platforms or 995/994/990 conventionalrotary or sickle platforms.3) Includes BE32237 Rear Reflector Bundle.

-1,272.00

ATTACHMENTS - ORDER AS DESIRED - FIELD INSTALLEDOPTIONS



No Charge

Lighting:9780 Additional Lighting Kit for Side and Rear

Includes four lights: two lights at each rear corner of the cab.294.00

Operator Environment:9227 Two Side-Mounted Rear View Mirrors - Electrically Adjusted and Heated 794.00

9244 Deere/Delco AM/FM Stereo Radio with Weatherband and Clock 479.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS - ORDER AS DESIRED - FIELD INSTALLEDOPTIONS ...Continued...

9245 Deere/Delco AM/FM Stereo Radio with Weatherband, Single Compact Disc Player andClock

843.00

Frame and Chassis:9300 Third step kit

Includes step, flexible mounts, and hardware to add 3rd step to 400 series windrowers.135.00

9505 Narrow Axle Wedge Kit, Left HandPuts left hand rear axle in narrow configuration when using windrow merger.

356.00

9506 Narrow Axle Wedge Kit, Right HandPuts right hand rear axle in narrow configuration when using windrow merger.

356.00

9500 Receiver Hitch for Canola RollerTo only be used for towing a canola roller.

443.00

ALLIED SUPPLIER INFORMATIONDRAPER PLATFORMS:Order draper platforms directly from Honey Bee Manufacturing Ltd.:Honey Bee Manufacturing LTD.P.O. Box 120Frontier, SK S0N 0W0 CanadaTelephone: (306) 296-2297FAX: (306) 296-2165www.honeybee.ca

FOR WINDROW MERGER ATTACHMENT CONTACT:RCI Engineering LLC970 Metalcraft DriveMayville, WI 53050Telephone: (toll free) (888) 472-4552Telephone: (920) 387-9804Fax: (920) 387-9806Email: [email protected]: www.RCIengineering.com

WEIGHT BOX FOR TRANSPORT OF 400 SERIES WINDROWERS WITHOUT A PLATFORMATTACHED CONTACT:RCI Engineering LLC970 Metalcraft DriveMayville, WI 53050Telephone: (toll free) (888) 472-4552Fax: (920) 387-9806Email: [email protected]: www.RCIengineering.com

Refer to the Agricultural Sales Manual For Additional Information.

POWERGARD PROTECTION PLAN AVAILABLE:Refer to Pathways/Sales/Marketing Tools/PowerGard Protection for options and pricing.


Cab and Controls:BH71948 Large Windshield Wiper (3 Blades)

Order from JD Harvester Works.676.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BH84043 Windshield Washer for 60 and 70 Series Combines

Order from JD Harvester Works.Also requires AE76837, Windshield Washer Kit from Parts.

205.00

Frame and Chassis:BE32235 Auger Platform Attaching Bundle

Required to attach 890/895/896 Auger Platform to R450 Traction Unit.Also requires BE32236, Auger Platform Forming Shields for all platforms except grass seedspecials.

1,441.00

BE32236 Auger Platform Forming ShieldsRequired for windrow formation when attaching 890/895/896 Auger Platform to R450Traction Unit.Also requires BE32235, Auger Platform Attaching Bundle.

1,508.10

BE32215 Narrow Axle Wedge Kit, Left HandPuts left hand rear axle in narrow configuration when using windrow merger.

391.60

BE32216 Narrow Axle Wedge Kit, Right HandPuts right hand rear axle in narrow configuration when using windrow merger.

391.60

BE32316 Rear Air-Screen Cover KitProvides high air intake to reduce ingestion of dry chaffy crops and dandelion seeds.Lengthens interval between rear air screen and cooling package cleaning.

2,057.00

BE32220 Receiver Hitch for Canola RollerTo only be used for towing a canola roller.

487.30

BE32326 Third step kitIncludes step, flexible mounts, and hardware to add 3rd step to 400 series windrowers.

148.50

Lighting:BE32218 Additional Lighting Kit for Side and Rear


BH84557 FieldVision Xenon HID Lighting PackageFor SN320001 and above.Order from JD Harvester Works.

962.50

Operator Environment:BE32213 Deere/Delco AM/FM Stereo Radio with Weatherband and Clock 526.90

BE32214 Deere/Delco AM/FM Stereo Radio with Weatherband, Single Compact Disc Player andClock

927.30

BE32217 Two Side-Mounted Rear View Mirrors - Electrically Adjusted and Heated 873.40

Weights:R66949 Quik-Tatch Weight, 42 Lb.

See Tractor price pages for more information. Sales manual and operators manual haveballasting recommendations.

62.06





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BM19780 Quik-Tatch Weight, 70 lb.


108.90




John Deere 6.8 L (414 Cu. In.)Turbo-Charged 200 HP (149 kW) 6 Cyl.PowerTech E EngineTier III Emissions Compliant

Hydrostatic Ground Drive Heavy-Duty,Double Reduction Planetary Final Drives

Variable Drive Motor Transport:0 to 21 mph (0 to 33.8 km/h)

Field: 0 to 15 mph (0 to 24.1 km/h)Drive Tires: 24.5-32 24PR

(R1) Bias Bar TiresRear Tires: 14L x 16.1 8PR Rib TiresAdjustable Rear Axle with

Independent Rear Suspension andSteering Assist

Tapered Main FrameTwo Exterior Rear View MirrorsRockshaft Platform LiftHydraulic Platform Float

(Adjustable from the Cab)Variable Speed Control for PlatformAdjustable Cutting Angle

(Hydraulically Adjusted from Cab)

CAB FEATURES:AutoTrac Universal (ATU) Ready*Large Approach Landing to CabTilt/Telescoping Steering WheelHeater/Air Conditioner with

Automatic Temperature ControlAutomatic Parking BrakeCAN-BUS Electrical SystemComfortCommand Adjustable Air

Suspension Seat and SeatbeltTraining Seat with Seat BeltRight-Hand Cornerpost Display: Warning

Display Panel Monitors Ten ItemsDigital Display of:Engine RPMGround Speed in MPHPlatform Float PressurePlatform HoursTraction Unit HoursDraper Reel Speed

Fuel GaugeEngine Temperature Gauge

Master Control Lever:Engine Idle SpeedGround Speed Forward/ReversePlatform Raise/Lower, Tilt,Float Pressure, andDisk or Draper Reel Speed

Command Center Armrest DisplayMonitor and Adjust Draper Specific FunctionsHome Page - Monitor Draper FunctionsDraper Page - Adjust Draper SettingsDraper Setup Page - Enable Draper FunctionsDiagnostic Information Page

Less RadioThree-Blade Windshield WiperExterior Lighting:

Six Cab Mounted HeadlampsTwo Rear FloodlampsFlashing Warning LightsTurn Signals


Toolbox - Two Included,One on Each Side

Hydraulic Service Cabinet forHydraulic Valves and Filters

Heavy-Duty Hydraulic Drive Motorfor Platform

Rotary Wand Air Screen12-Volt Electrical System with

120 amp AlternatorOne, 925 CCA, Low Maintenance

StrongBox Battery125 Gallon (473 L) Fuel TankAnti-FreezeHydraulic OilLess Platform

Note: Compatible with MY11 and Newer 600D Platforms, Only


SUGGESTEDLIST PRICE

USD ($)



BALLASTING RECOMMENDATIONS:For more information on ballasting recommendations, please visit the Ag Sales Manual.

6582E D450 Turbo-Diesel Self-Propelled Windrower Traction UnitCompatible with MY11 and Newer 600D Platforms Only.

117,773.00

DESTINATION


D450 Turbo-Diesel Self-Propelled Windrower Traction UnitEquipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)




0195 Mexico Same Price








A COMAR Net Charge for rust proofing, additional fuel filtration, license plate holder, andlabeling will be added when this code is ordered.

Net Item Charge

0081 KazakhstanA COMAR Net Charge for rust proofing, additional fuel filtration, license plate holder, andlabeling will be added when this code is ordered.

Net Item Charge




Net Item Charge


Net Item Charge



Same Price


Same Price


Same Price


D450 Turbo-Diesel Self-Propelled Windrower Traction UnitContinued



SUGGESTEDLIST PRICE

USD ($)

LANGUAGE AND DECALS ...Continued...0437 Spanish

Spanish operator manual and text free decals.Same Price


Same Price


Same Price

0445 KazakhstanKazakhstan operator manual and text free decals.

Same Price

DRIVE WHEELS WITH TIRES3000 24.5-32 24PR (R1) Bias Bar Tires In Base Price

3010 650/75R32 172B (R1W) Radial Bar TiresRecommended for best ride quality and for muddy conditions.

2,868.00




No Charge

Lighting:9780 Additional Lighting Kit for Side and Rear


Operator Environment:9227 Two Side-Mounted Rear View Mirrors - Electrically Adjusted and Heated 794.00

9244 Deere/Delco AM/FM Stereo Radio with Weatherband and Clock 479.00

9245 Deere/Delco AM/FM Stereo Radio with Weatherband, Single Compact Disc Player andClock

843.00

Frame and Chassis:9300 Third step kit

Includes step, flexible mounts, and hardware to add 3rd step to 400 series windrowers.135.00

9500 Receiver Hitch for Canola RollerTo only be used for towing a canola roller.

443.00





SUGGESTEDLIST PRICE

USD ($)


ALLIED SUPPLIER INFORMATIONFOR WEIGHT BOX CONTACT:

RCI Engineering LLC970 Metalcraft DriveMayville, WI 53050Telephone: (toll free) (888) 472-4552Fax: (920) 387-9806Email: [email protected]: www.RCIengineering.com


POWERGARD PROTECTION PLAN AVAILABLE

Refer to Pathways/Sales/Marketing Tools/PowerGard Protection for options and pricing.


Cab and Controls:BH84043 Windshield Washer for 60 and 70 Series Combines

Order from JD Harvester Works.Also requires AE76837, Windshield Washer Kit from Parts.

205.00

Frame and Chassis:BE32316 Rear Air-Screen Cover Kit

Provides high air intake to reduce ingestion of dry chaffy crops and dandelion seeds.Lengthens interval between rear air screen and cooling package cleaning.

2,057.00

BE32220 Receiver Hitch for Canola RollerTo only be used for towing a canola roller.

487.30

BE32326 Third step kitIncludes step, flexible mounts, and hardware to add 3rd step to 400 series windrowers.

148.50

Lighting:BE32218 Additional Lighting Kit for Side and Rear


BH84557 FieldVision Xenon HID Lighting PackageFor SN320001 and above.Order from JD Harvester Works.

962.50

Operator Environment:BE32213 Deere/Delco AM/FM Stereo Radio with Weatherband and Clock 526.90

BE32214 Deere/Delco AM/FM Stereo Radio with Weatherband, Single Compact Disc Player andClock

927.30

BE32217 Two Side-Mounted Rear View Mirrors - Electrically Adjusted and Heated 873.40





SUGGESTEDLIST PRICE

USD ($)


Weights:R66949 Quik-Tatch Weight, 42 Lb.


62.06

BM19780 Quik-Tatch Weight, 70 lb.See Tractor price pages for more information. Sales manual and operators manual haveballasting recommendations.

108.90








Cummins, QSB 4.5 L, (275 Cu. In.)Turbo-Charged 110 HP (81 kW) 4 Cyl.Tier III Emissions Compliant

Hydrostatic Ground Drive 2 SpeedPlanetary Final Drives

Variable Drive MotorTransport: 0 to 16 mph (0 to 26 km/h)

Field: 0 to 11 mph (0 to 18 km/h)Drive Tires: 18.4 x 26 ButtonRear Tires: 16.5L - 16.1 Forked Casters,Adjustable Width Rear AxleTwo Exterior Rear View MirrorsHydraulic Platform LiftSpring Platform FloatAdjustable Cutting Angle

CAB FEATURES:Large Approach Landing to Cab

with Movable Service Platformswith Large Integrated Toolbox

Tilt Steering WheelHeater/Air ConditionerAutomatic Parking BrakeAdjustable Air Suspension Seat and Seat BeltCAN-BUS Electrical SystemArmrest Display: WarningDigital Display of:

Engine RPMGround SpeedTraction Unit HoursEngine Hours

Analog Display of:Fuel LevelEngine Temperature

Master Control Lever:Ground Speed Forward/Reverse

Platform Raise/Lower, TiltReel Raise Lower, Fore AftAuto Trac Resume Switch

Radio Ready with Two Speakers,Wiring and Antenna

Single-Blade Windshield WiperExterior Lighting:

Seven Forward Cab Mounted HeadlampsTwo Side Floodlamps Cab Mounted,Two Additional Floodlampson Rear of Machine

Hydraulic Service AccessHydraulic Valves and Filters


Rotary Wand Air Screen12-Volt Electrical System with

130 Amp AlternatorTwo 700 CCA Batteries97 Gallon (367 L) Fuel TankAnti-FreezeHydraulic OilTurn SignalsFlashing Warning LightsHydraulic System and Couplers to

Attach 400D Draper PlatformsLess Couplers for

100A Auger PlatformsLess Platform


SUGGESTEDLIST PRICE

USD ($)


BASE MACHINEEX-WORKS Winnipeg, MB or Port of Entry

BALLASTING & FLOAT SPRING RECOMMENDATIONS:For more information on float springs and ballasting recommendations, please see machineoperator manual and Ag Sales manual.

4000E W110 Turbo-Diesel Self-Propelled Windrower Traction UnitCompatible with MY13 and Newer 100A and 400D Platforms Only.

104,213.00

DESTINATION





W110 Turbo-Diesel Self-Propelled Windrower Traction UnitEquipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)



Configuration includes beacon lights, lighting and marking changes for local markets, andsoftware changes for local language. Machine is configured to ship in container.

Net Item Charge

0237 New ZealandConfiguration includes beacon lights, lighting and marking changes for local markets, andsoftware changes for local language. Machine is configured to ship in container.

Net Item Charge



Net Item Charge

0166 UkraineConfiguration includes beacon lights, lighting and marking changes for local markets, andsoftware changes for local language. Machine is configured to ship in container.

Net Item Charge

0081 KazakhstanConfiguration includes beacon lights, lighting and marking changes for local markets, andsoftware changes for local language. Machine is configured to ship in container.

Net Item Charge

LANGUAGE AND DECALSEnglish Operators Manuals are included with all other languages selected. Text free decalsare included on all machines.

0409 English (U.S. / Canada ONLY)English operator manual and text free decals.

In Base Price

0443 English/Spanish (U.S. ONLY)English and Spanish operator manual.

Same Price


Same Price


Same Price


Same Price


Same Price


Same Price

DRIVE WHEELS WITH TIRES3000 600-65R28 Radial Bar Tires

Recommended for best ride quality and for muddy conditions and draper use in small grains.2,956.00

3010 18.4-26 Bar TiresNot recommended with 40 Ft. Draper Platform or 35 Ft. with double knife and split reel.

-37.00


W110 Turbo-Diesel Self-Propelled Windrower Traction UnitContinued



SUGGESTEDLIST PRICE

USD ($)

DRIVE WHEELS WITH TIRES ...Continued...

3020 23.1-26 Button TiresRecommended for minimum turf damage on hay crops.

1,409.00

3030 18.4-26 Button TiresRecommended for minimum turf damage on hay crops. Not recommended with 40 Ft. DraperPlatform or 35 Ft. with double knife and split reel.

In Base Price

TAIL WHEELS WITH TIRES3100 16.5L - 16.1 Tires and Forked Casters

Recommended for best ride quality and for muddy conditions.In Base Price

3110 10 x 16 Tires and Forked Casters -359.00

3120 7.5 - 16 SL Tires and Formed CastersRecommended for easier to change tire compared to forked caster and less interference withwindrow.

-690.00

3130 10 x 16 Tires and Formed CastersRecommended for easier to change tire compared to forked caster and less interference withwindrow.

-919.00

PLATFORM TILT4000 Hydraulic Centerlink for W110 and W150

Dealer installed. Additional Auxiliary Valve Required for W110. If platform angle monitoringis desired on W110 it will require additional bundle (kit - knife speed, reel speed and index, tiltsense for W110). The angle monitoring is in base equipment for the W150.

In Base Price

4010 Mechanical Centerlink for W110 and W150Dealer installed.

-740.00


Lighting:9011 Warning Beacons

In base equipment for markets outside of US/Canada.343.00

9018 HID Auxiliary Front Lighting - Includes Two LightsMounts to rear view mirror brackets.

1,006.00

Operator Environment:9007 Windshield Shades (Includes Front and Rear Shades)

Recommended to reduce glare from sun off front windshield during early morning and lateafternoon operation.

272.00

9017 Instructional Seat - W110 OnlyCompatible with W110 ONLY. In base equipment for W150.

365.00





SUGGESTEDLIST PRICE

USD ($)


9019 Kit - Knife Speed, Reel Speed and Index, Tilt Sense - W110 OnlyCompatible with W110 ONLY. In base equipment for W150. Allows the electronic monitoringof platform knife speed, reel speed and platform angle. Also enables the indexing of reel speedto ground speed. Requires knife speed sensor and reel speed sensor on platform. Requireshydraulic center link on W110 for platform angle sense.

505.00

Frame and Chassis:9004 Booster Spring Kit External (Includes 2 Springs and Hardware)

Booster spring kits are required for all 180A Auger Headers and many 30 Ft. and largerDraper Header configurations. Refer to the Float Spring Requirements in Sales Manual forrequirements.

292.00

9006 Light Platform Floatation KitRequired for 415D. Extension bracket for spring to reduce float. Refer to the Float SpringRequirements in Sales Manual for requirements.

172.00

9008 Weight Box (With Weight) For Transport Less Platform (U.S. and Canada Only)Weight Box required to allow transport without platform attached. Weight Box includes hitchfor towing slow speed transport behind W150 Windrowers. Must also order wiring harnessand hitch pin for weight box if towing Slow Speed Transport with W150. Requires wiringharness and pin for connecting to the draper platform slow speed transport drawbar.

1,591.00

9009 Weight Box (Less Weight) For Transport Less Platform (Outside of U.S. and Canada Only)Weight Box required to allow transport without platform attached. Weight Box includes hitchfor towing slow speed transport behind W150 Windrowers. Must also order wiring harnessand hitch pin for weight box if towing Slow Speed Transport with W150. Requires wiringharness and pin for connecting to the draper platform slow speed transport drawbar. Requiresadding concrete for ballast during set up.

1,466.00

9095 Wiring Harness and Hitch Pin KitIncludes wiring harness for weight box to attach lighting for platform when operating onpublic roadways.

161.00

9013 Engine Fan BaffleReduces windrow disturbance caused by engine cooling fan blast. Recommended for reducingdust or crop disturbance for extended intervals between cleaning the rear screen and airfilters.

127.00

9014 Auxiliary Hydraulic ValveDealer installed. Required for Hydraulic Centerlink on W110. In base equipment on W150.Requires additional kit on W110 if platform angle monitoring is desired.

374.00

9015 Anti-Shimmy for Rear Casters For W110Compatible with W110 ONLY. In base equipment on W150.

506.00


Frame and Chassis:BE32373 Anti-Shimmy for Rear Casters For W110

Compatible with W110 ONLY. In base equipment on W150.556.60

BE32372 Auxiliary Hydraulic ValveDealer installed. Required for Hydraulic Centerlink on W110. In base equipment on W150.Requires additional kit on W110 if platform angle monitoring is desired.

411.40





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BE32362 Booster Spring Kit External (Includes 2 Springs and Hardware)

Booster spring kits are required for all 180A Auger Headers and many 30 Ft. and largerDraper Header configurations. Refer to the Float Spring Requirements in Sales Manual forrequirements.

321.20

BE32371 Engine Fan BaffleReduces windrow disturbance caused by engine cooling fan blast. Recommended for reducingdust or crop disturbance for extended intervals between cleaning the rear screen and airfilters.

139.70

BE32357 Hydraulic Centerlink for W110 and W150Dealer installed. Additional Auxiliary Valve Required for W110. If platform angle monitoringis desired on W110 it will require additional bundle (kit - knife speed, reel speed and index, tiltsense for W110). The angle monitoring is in base equipment for the W150.

1,523.50

BE32364 Light Platform Floatation KitRequired for 415D. Extension bracket for spring to reduce float. Refer to the Float SpringRequirements in Sales Manual for requirements.

189.20

BE32374 Transport Draw Bar KitFor W110 and W150 Windrowers.

See Parts

BE32367 Weight Box (Less Weight) For Transport Less Platform (Outside of U.S. and Canada Only)Weight Box required to allow transport without platform attached. Weight Box includes hitchfor towing slow speed transport behind W150 Windrowers. Must also order wiring harnessand hitch pin for weight box if towing Slow Speed Transport with W150. Requires wiringharness and pin for connecting to the draper platform slow speed transport drawbar. Requiresadding concrete for ballast during set up.

1,612.60

BE32366 Weight Box (With Weight) For Transport Less Platform (U.S. and Canada Only)Weight Box required to allow transport without platform attached. Weight Box includes hitchfor towing slow speed transport behind W150 Windrowers. Must also order wiring harnessand hitch pin for weight box if towing Slow Speed Transport with W150. Requires wiringharness and pin for connecting to the draper platform slow speed transport drawbar.

1,750.10

BE32429 Wiring Harness and Hitch Pin KitIncludes wiring harness for weight box to attach lighting for platform when operating onpublic roadways.

177.10

Lighting:BE32376 HID Auxiliary Front Lighting - Includes Two Lights

Mounts to rear view mirror brackets.1,106.60

BE32369 Warning BeaconsIn base equipment for markets outside of US/Canada.

377.30

Operator Environment:BE32375 Instructional Seat - W110 Only

Compatible with W110 ONLY. In base equipment for W150.401.50

SWJHD1120 Jensen AM/FM/WB Heavy Duty StereoW110 and W150 Windrowers are pre-wired with 2 speakers, antenna, and wiring for easyinstallation of the radio as desired. The wiring is DIN "E" style for power and speakerconnections with standard AM/FM antenna connection. Jensen heavy duty radio optionsrecommended. Requires adapter harness SW31100103. See Parts Expert for more information.

See Parts





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...SWJHD3620 Jensen AM/FM/WB/CD/USB Satellite & iPod Ready Stereo

W110 and W150 Windrowers are pre-wired with 2 speakers, antenna, and wiring for easyinstallation of the radio as desired. The wiring is DIN "E" style for power and speakerconnections with standard AM/FM antenna connection. Jensen heavy duty radio optionsrecommended. Requires adapter harness SW31100103. See Parts Expert for more information.

See Parts

BE32377 Kit - Knife Speed, Reel Speed and Index, Tilt Sense - W110 OnlyCompatible with W110 ONLY. In base equipment for W150. Allows the electronic monitoringof platform knife speed, reel speed and platform angle. Also enables the indexing of reel speedto ground speed. Requires knife speed sensor and reel speed sensor on platform. Requireshydraulic center link on W110 for platform angle sense.

555.50

SWJHD1620 Stereo with AM/FM, Weatherband, SIRIUS Satellite and iPod ReadyW110 and W150 Windrowers are pre-wired with 2 speakers, antenna, and wiring for easyinstallation of the radio as desired. The wiring is DIN "E" style for power and speakerconnections with standard AM/FM antenna connection. Jensen heavy duty radio optionsrecommended. Requires adapter harness SW31100103. See Parts Expert for more information.

See Parts

BE32365 Windshield Shades (Includes Front and Rear Shades)Recommended to reduce glare from sun off front windshield during early morning and lateafternoon operation.

299.20




Cummins, QSB 4.5 L, (275 Cu. In.)Turbo-Charged 148 HP (110 kW) 4 Cyl.Tier III Emissions Compliant

Hydrostatic Ground Drive 3 SpeedPlanetary Final Drives

Variable Drive MotorTransport: 0 to 23 mph (0 to 37 km/h)

Field (Cab Forward): 0 to 16 mph (0 to 26 km/h)Drive Tires: 18.4 x 26 ButtonRear Tires: 16.5L - 16.1 Forked Casters,Adjustable Width Rear AxleTwo Exterior Rear View Mirrors and

One Interior Rear View MirrorHydraulic Platform LiftSpring Platform Float

Fine Float Adjustable from the CabAdjustable Cutting Angle

CAB FEATURES:Reversible Operator StationLarge Approach Landing to Cab

with Movable Service Platformswith Large Integrated Toolbox

Tilt Steering WheelHeater/Air ConditionerAutomatic Parking BrakeAdjustable Air Suspension Seat

and Seat BeltTraining Seat with Seat BeltCAN-BUS Electrical SystemArmrest Display: Warning Monitor

with 2 Line Display and ControlsDigital Display of:

Engine RPMGround SpeedTraction Unit HoursEngine HoursBelt SpeedKnife SpeedReel Speed

Analog Display of:

Fuel LevelEngine Temperature

Master Control Lever:Ground Speed Forward/ReversePlatform Raise/Lower, TiltReel Raise Lower, Fore AftAuto Trac Resume Switch

Radio Ready with Two Speakers,Wiring and Antenna

Single-Blade Windshield WiperFront and Rear

Exterior Lighting:Seven Forward Cab Mounted HeadlampsTwo Side Floodlamps Cab Mounted,Two Additional Floodlampson Rear of Machine

Hydraulic Service AccessHydraulic Valves and Filters


Rotary Wand Air Screen12-Volt Electrical System with130 Amp Alternator

Two 700 CCA Batteries97 Gallon (367 L) Fuel TankAnti-FreezeHydraulic OilTurn SignalsFlashing Warning LightsHydraulic System and Couplers to

Attach 400D Draper PlatformsLess Couplers for

100A Auger PlatformsLess Platform


SUGGESTEDLIST PRICE

USD ($)



BALLASTING & FLOAT SPRING RECOMMENDATIONS:For more information on float springs and ballasting recommendations, please see machineoperator manual and Ag Sales manual.

4010E W150 Turbo-Diesel Self-Propelled Windrower Traction UnitCompatible with MY13 and Newer 100A and 400D Platforms Only.

110,789.00

DESTINATION



W150 Turbo-Diesel Self-Propelled Windrower Traction UnitEquipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)





Net Item Charge

0237 New ZealandConfiguration includes beacon lights, lighting and marking changes for local markets, andsoftware changes for local language. Machine is configured to ship in container.

Net Item Charge



Net Item Charge

0166 UkraineConfiguration includes beacon lights, lighting and marking changes for local markets, andsoftware changes for local language. Machine is configured to ship in container.

Net Item Charge

0081 KazakhstanConfiguration includes beacon lights, lighting and marking changes for local markets, andsoftware changes for local language. Machine is configured to ship in container.

Net Item Charge

LANGUAGE AND DECALSEnglish Operators Manuals are included with all other languages selected. Text free decalsare included on all machines.


In Base Price

0443 English/Spanish (U.S. ONLY)English and Spanish operator manual.

Same Price


Same Price


Same Price


Same Price


Same Price


Same Price

DRIVE WHEELS WITH TIRES3000 600-65R28 Radial Bar Tires 2,956.00





SUGGESTEDLIST PRICE

USD ($)

DRIVE WHEELS WITH TIRES ...Continued...Recommended for best ride quality and for muddy conditions and draper use in small grains.

3010 18.4-26 Bar TiresNot recommended with 40 Ft. Draper Platform or 35 Ft. with double knife and split reel.

-37.00

3020 23.1-26 Button TiresRecommended for minimum turf damage on hay crops.

1,409.00

3030 18.4-26 Button TiresRecommended for minimum turf damage on hay crops. Not recommended with 40 Ft. DraperPlatform or 35 Ft. with double knife and split reel.

In Base Price

TAIL WHEELS WITH TIRES3100 16.5L - 16.1 Tires and Forked Casters

Recommended for best ride quality and for muddy conditions.In Base Price

3110 10 x 16 Tires and Forked Casters -359.00

3120 7.5 - 16 SL Tires and Formed CastersRecommended for easier to change tire compared to forked caster and less interference withwindrow.

-690.00

3130 10 x 16 Tires and Formed CastersRecommended for easier to change tire compared to forked caster and less interference withwindrow.

-919.00

PLATFORM TILT4000 Hydraulic Centerlink for W110 and W150

Dealer installed. Additional Auxiliary Valve Required for W110. If platform angle monitoringis desired on W110 it will require additional bundle (kit - knife speed, reel speed and index, tiltsense for W110). The angle monitoring is in base equipment for the W150.

In Base Price

4010 Mechanical Centerlink for W110 and W150Dealer installed.

-740.00


Lighting:9011 Warning Beacons

In base equipment for markets outside of US/Canada.343.00

9012 Lighting/Marking Kit for Cab Forward Road Travel on W150Kit is required for cab forward road travel on W150. In base equipment on W110 - cabforward only. Not compatible with export markets outside of the US/Canada/Mexico. Thelighting also does not meet the Russia GOST standards.

321.00

9018 HID Auxiliary Front Lighting - Includes Two LightsMounts to rear view mirror brackets.

1,006.00





SUGGESTEDLIST PRICE

USD ($)


Operator Environment:9007 Windshield Shades (Includes Front and Rear Shades)

Recommended to reduce glare from sun off front windshield during early morning and lateafternoon operation.

272.00

Frame and Chassis:9001 Centerlink Vertical-Alignment Kit

Additional cylinder to raise and lower the center link for faster and easier attaching of theplatform. Highly recommended for commercial operators and customers who attach anddetach the platform for transport frequently. Compatible with W150 ONLY. Not compatiblewith W110.

242.00

9002 Pressure Sensor KitGives indication of capacity when operating in tough conditions to maximize machineproductivity. Compatible with W150 ONLY. Not compatible with W110. Allows monitoring ofhydraulic platform drive pressures as follows: Knife or Reel circuit on Draper Platform,Knife/Conditioner circuit on Auger Platform.

338.00

9003 Reverser - W150 OnlyRecommended with hay conditioner on draper platforms. Compatible with W150 ONLY. Notcompatible with W110.Reverses Knife, and optional conditioner on 400D Draper Platforms, (does not reverse reel ordraper belt)Reverses Knife, Auger, Reel, and Conditioner on 100A Auger Platforms.

1,092.00

9004 Booster Spring Kit External (Includes 2 Springs and Hardware)Booster spring kits are required for all 180A Auger Headers and many 30 Ft. and largerDraper Header configurations. Refer to the Float Spring Requirements in Sales Manual forrequirements.

292.00

9006 Light Platform Floatation KitRequired for 415D. Extension bracket for spring to reduce float. Refer to the Float SpringRequirements in Sales Manual for requirements.

172.00

9008 Weight Box (With Weight) For Transport Less Platform (U.S. and Canada Only)Weight Box required to allow transport without platform attached. Weight Box includes hitchfor towing slow speed transport behind W150 Windrowers. Must also order wiring harnessand hitch pin for weight box if towing Slow Speed Transport with W150. Requires wiringharness and pin for connecting to the draper platform slow speed transport drawbar.

1,591.00

9009 Weight Box (Less Weight) For Transport Less Platform (Outside of U.S. and Canada Only)Weight Box required to allow transport without platform attached. Weight Box includes hitchfor towing slow speed transport behind W150 Windrowers. Must also order wiring harnessand hitch pin for weight box if towing Slow Speed Transport with W150. Requires wiringharness and pin for connecting to the draper platform slow speed transport drawbar. Requiresadding concrete for ballast during set up.

1,466.00

9095 Wiring Harness and Hitch Pin KitIncludes wiring harness for weight box to attach lighting for platform when operating onpublic roadways.

161.00

9013 Engine Fan BaffleReduces windrow disturbance caused by engine cooling fan blast. Recommended for reducingdust or crop disturbance for extended intervals between cleaning the rear screen and airfilters.

127.00





SUGGESTEDLIST PRICE

USD ($)


9014 Auxiliary Hydraulic ValveDealer installed. Required for Hydraulic Centerlink on W110. In base equipment on W150.Requires additional kit on W110 if platform angle monitoring is desired.

374.00

9090 Windrow Merger Attachment for W150Dealer Installed. Recommended for 140A and 160A auger platforms and 425D Ft. andnarrower under draper platforms. Requires hay conditioner on draper platforms on to transfercrop to belt on double windrow attachment.

9,965.00


Frame and Chassis:BE32372 Auxiliary Hydraulic Valve

Dealer installed. Required for Hydraulic Centerlink on W110. In base equipment on W150.Requires additional kit on W110 if platform angle monitoring is desired.

411.40

BE32362 Booster Spring Kit External (Includes 2 Springs and Hardware)Booster spring kits are required for all 180A Auger Headers and many 30 Ft. and largerDraper Header configurations. Refer to the Float Spring Requirements in Sales Manual forrequirements.

321.20

BE32359 Centerlink Vertical-Alignment KitAdditional cylinder to raise and lower the center link for faster and easier attaching of theplatform. Highly recommended for commercial operators and customers who attach anddetach the platform for transport frequently. Compatible with W150 ONLY. Not compatiblewith W110.

266.20

BE32371 Engine Fan BaffleReduces windrow disturbance caused by engine cooling fan blast. Recommended for reducingdust or crop disturbance for extended intervals between cleaning the rear screen and airfilters.

139.70

BE32357 Hydraulic Centerlink for W110 and W150Dealer installed. Additional Auxiliary Valve Required for W110. If platform angle monitoringis desired on W110 it will require additional bundle (kit - knife speed, reel speed and index, tiltsense for W110). The angle monitoring is in base equipment for the W150.

1,523.50

BE32364 Light Platform Floatation KitRequired for 415D. Extension bracket for spring to reduce float. Refer to the Float SpringRequirements in Sales Manual for requirements.

189.20

BE32360 Pressure Sensor KitGives indication of capacity when operating in tough conditions to maximize machineproductivity. Compatible with W150 ONLY. Not compatible with W110. Allows monitoring ofhydraulic platform drive pressures as follows: Knife or Reel circuit on Draper Platform,Knife/Conditioner circuit on Auger Platform.

371.80

BE32361 Reverser - W150 OnlyRecommended with hay conditioner on draper platforms. Compatible with W150 ONLY. Notcompatible with W110.Reverses Knife, and optional conditioner on 400D Draper Platforms, (does not reverse reel ordraper belt)Reverses Knife, Auger, Reel, and Conditioner on 100A Auger Platforms.

1,201.20

BE32374 Transport Draw Bar KitFor W110 and W150 Windrowers.

See Parts





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BE32367 Weight Box (Less Weight) For Transport Less Platform (Outside of U.S. and Canada Only)

Weight Box required to allow transport without platform attached. Weight Box includes hitchfor towing slow speed transport behind W150 Windrowers. Must also order wiring harnessand hitch pin for weight box if towing Slow Speed Transport with W150. Requires wiringharness and pin for connecting to the draper platform slow speed transport drawbar. Requiresadding concrete for ballast during set up.

1,612.60

BE32366 Weight Box (With Weight) For Transport Less Platform (U.S. and Canada Only)Weight Box required to allow transport without platform attached. Weight Box includes hitchfor towing slow speed transport behind W150 Windrowers. Must also order wiring harnessand hitch pin for weight box if towing Slow Speed Transport with W150. Requires wiringharness and pin for connecting to the draper platform slow speed transport drawbar.

1,750.10

BE32428 Windrow Merger Attachment for W150Dealer Installed. Recommended for 140A and 160A auger platforms and 425D Ft. andnarrower under draper platforms. Requires hay conditioner on draper platforms on to transfercrop to belt on double windrow attachment.

10,961.50

BE32429 Wiring Harness and Hitch Pin KitIncludes wiring harness for weight box to attach lighting for platform when operating onpublic roadways.

177.10

Lighting:BE32376 HID Auxiliary Front Lighting - Includes Two Lights

Mounts to rear view mirror brackets.1,106.60

BE32370 Lighting/Marking Kit for Cab Forward Road Travel on W150Kit is required for cab forward road travel on W150. In base equipment on W110 - cabforward only. Not compatible with export markets outside of the US/Canada/Mexico. Thelighting also does not meet the Russia GOST standards.

353.10

BE32369 Warning BeaconsIn base equipment for markets outside of US/Canada.

377.30

Operator Environment:SWJHD1120 Jensen AM/FM/WB Heavy Duty Stereo

W110 and W150 Windrowers are pre-wired with 2 speakers, antenna, and wiring for easyinstallation of the radio as desired. The wiring is DIN "E" style for power and speakerconnections with standard AM/FM antenna connection. Jensen heavy duty radio optionsrecommended. Requires adapter harness SW31100103. See Parts Expert for more information.

See Parts

SWJHD3620 Jensen AM/FM/WB/CD/USB Satellite & iPod Ready StereoW110 and W150 Windrowers are pre-wired with 2 speakers, antenna, and wiring for easyinstallation of the radio as desired. The wiring is DIN "E" style for power and speakerconnections with standard AM/FM antenna connection. Jensen heavy duty radio optionsrecommended. Requires adapter harness SW31100103. See Parts Expert for more information.

See Parts

SWJHD1620 Stereo with AM/FM, Weatherband, SIRIUS Satellite and iPod ReadyW110 and W150 Windrowers are pre-wired with 2 speakers, antenna, and wiring for easyinstallation of the radio as desired. The wiring is DIN "E" style for power and speakerconnections with standard AM/FM antenna connection. Jensen heavy duty radio optionsrecommended. Requires adapter harness SW31100103. See Parts Expert for more information.

See Parts

BE32365 Windshield Shades (Includes Front and Rear Shades)Recommended to reduce glare from sun off front windshield during early morning and lateafternoon operation.

299.20




Cutting Width: 14 Ft. 9 In. (4496 mm) 140A,16 Ft. 3 In. (4953 mm) 160A,17 Ft. 9 In. (5410 mm) 180A

Hydraulically Driven with Independent VariableSpeeds of Reel, Auger, and Knife/Conditioner

Timed Dual-Knife Drive withKevlar Reinforced Cogged Belts

Forged Two Tine Guards with AdjustableHold Downs, and Bolt On Sickle Sections

Storage for Extra Knives in Knockdown BarReel:Six-Bat Reel with Enclosed Oval Tube BatsHeavy-Duty Bolt-On Reel SpidersHeavy-Duty, High Density, Wraparound Reel TeethHeavy-Duty Tooth Pipes with Greaseable Ball

BearingsSteel Reel CamSteel Reel TeethAdjustable Reel SpeedHeader Index Automatic Reel Speed Control

with W110 or W150Right Hand and Left Hand Inboard Mounted GaugeShoesSteel Conditioner Rolls102 In. Long, Intermeshing Straight Steel Flutes

with N Bar ProfileAdjustable Roll Spacing and Roll Pressure

Single 20" Auger Crop DeliveryPoly Auger Pan with StrippersDrop Out Area for Soil and Rocks

Between Auger and ConditionerSingle Lever Adjustable Swath BoardFlat Face Hydraulic Quick Coupler Connection

for Compatibility with W110 or W150Hydraulic Quick Couplers for One Power Unit

(W110 or W150)Transport Warning LightsMechanical Reversing Tool

Requires Option 9048 for Forming Shields whichIncludes

Forming Shields with Vanes and AdjustableSide Panels and Fluff BoardForming Shield Attaching Hardware


SUGGESTEDLIST PRICE

USD ($)



Compatible with W110 or W150 windrowers. 180A 18' Auger platforms are not compatiblewith W110 due to power level.

4210E 140A Auger Platform - 14 Ft. (4.3 m)Option code 9048 forming shield kit is required with this base code. Be sure to select this codewithin the optional equipment section.If mounting on a W110, must also order Check Valve to prevent reel movement on startup (partnumber AFH209759).

40,141.00

DESTINATION





Machine is configured to ship in container.Net Item Charge


140A Auger Platform - 14 Ft. (4.3 m)Equipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)

DESTINATION ...Continued...0237 New Zealand




0166 UkraineMachine is configured to ship in container.

Net Item Charge

0081 KazakhstanMachine is configured to ship in container.

Net Item Charge

LANGUAGE AND DECALSEnglish Operators Manuals are included with all other languages selected.


In Base Price

0443 English/Spanish (U.S. ONLY)English and Spanish operator manual and text free decals.

Same Price


Same Price


Same Price


Same Price


Same Price


Same Price


Frame and Chassis:9090 Windrow Merger Attachment for W150

Dealer Installed. Recommended for 140A and 160A auger platforms and 425D Ft. andnarrower draper platforms.

9,965.00

Miscellaneous:9000 Gauge Rollers (Qty. 2)

Dealer installed. One set can be installed in outboard position only.1,433.00

9010 Additional Gauge Shoes (Qty. 2)Dealer installed. One set can be installed in outboard position. One set of shoes is factoryinstalled (inboard mounted on all models). Can also be used as replacement sets.

492.00


140A Auger Platform - 14 Ft. (4.3 m)Continued



SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS - ORDER AS DESIRED ...Continued...9086 Non Clog Guards 14 Ft.

Dealer Installed. It is in addition to or for replacement of pointed guards in base equipment.1,905.00

9040 Tall Crop DividerDealer installed. Includes left and right side crop dividers, hardware, and extensions to raiseknock down bar for harvesting tall crops.

607.00

9076 Replacement Reel Bat Kit 14 Ft. - 140ADealer Installed. Can also be installed as an additional bat for improved feeding.

1,391.00

9048 Forming Shields KitDealer Installed. Includes forming shields and attaching hardware to equip one W110 orW150 model windrower. One set required for each 100A platform.Option Code 9048 MUST be ordered for each Auger Platform.

1,084.00

BALLASTING RECOMMENDATIONSBallasting weights should be ordered through weight program. For more information onballasting recommendations, please visit the Ag Sales Manual.


Frame and Chassis:BE32428 Windrow Merger Attachment for W150


10,961.50

Miscellaneous:BE32368 Additional Gauge Shoes (Qty. 2)

Dealer installed. One set can be installed in outboard position. One set of shoes is factoryinstalled (inboard mounted on all models). Can also be used as replacement sets.

541.20

BE32457 Forming Shields KitDealer Installed. Includes forming shields and attaching hardware to equip one W110 orW150 model windrower. One set required for each 100A platform.Option Code 9048 MUST be ordered for each Auger Platform.

See Parts

BE32358 Gauge Rollers (Qty. 2)Dealer installed. One set can be installed in outboard position only.

1,576.30

BE32427 Non Clog Guards 14 Ft.Dealer Installed. It is in addition to or for replacement of pointed guards in base equipment.

2,095.50

BE32418 Replacement Reel Bat Kit 14 Ft. - 140ADealer Installed. Can also be installed as an additional bat for improved feeding.

1,530.10

BE32399 Tall Crop DividerDealer installed. Includes left and right side crop dividers, hardware, and extensions to raiseknock down bar for harvesting tall crops.

667.70























SUGGESTEDLIST PRICE

USD ($)




4240E 160A Auger Platform - 16 Ft. (4.9 m)Option code 9048 forming shield kit is required with this base code. Be sure to select this codewithin the optional equipment section.If mounting on a W110, must also order Check Valve to prevent reel movement on startup (partnumber AFH209759).

40,703.00

DESTINATION










SUGGESTEDLIST PRICE

USD ($)






Net Item Charge


Net Item Charge



In Base Price


Same Price


Same Price


Same Price


Same Price


Same Price


Same Price


Frame and Chassis:9090 Windrow Merger Attachment for W150


9,965.00




492.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS - ORDER AS DESIRED ...Continued...9020 Non Clog Guards 16 Ft.

Dealer Installed. It is in addition to or for replacement of pointed guards in base equipment.2,083.00

9040 Tall Crop DividerDealer installed. Includes left and right side crop dividers, hardware, and extensions to raiseknock down bar for harvesting tall crops.

607.00


1,426.00


1,084.00



Frame and Chassis:BE32428 Windrow Merger Attachment for W150


10,961.50



541.20


See Parts


1,576.30


2,291.30


1,568.60


667.70























SUGGESTEDLIST PRICE

USD ($)




4260E 180A Auger Platform - 18 Ft. (5.5 m)Option code 9048 forming shield kit is required with this base code. Be sure to select this codewithin the optional equipment section.Recommended for use with W150 windrower. Not compatible with W110 due to powerrequirement.

41,483.00

DESTINATION










SUGGESTEDLIST PRICE

USD ($)






Net Item Charge


Net Item Charge



In Base Price


Same Price


Same Price


Same Price


Same Price


Same Price


Same Price


Frame and Chassis:




492.00

9025 Non Clog Guards 18 Ft.Dealer Installed. It is in addition to or for replacement of pointed guards in base equipment.

2,261.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS - ORDER AS DESIRED ...Continued...9040 Tall Crop Divider

Dealer installed. Includes left and right side crop dividers, hardware, and extensions to raiseknock down bar for harvesting tall crops.

607.00


1,440.00


1,084.00





541.20


See Parts


1,576.30


2,487.10


1,584.00


667.70








Impeller Conditioner - Urethane, V10Steel, or Tri-Lobe Steel Roll Optional

13 Ft. (4 m) Cutting Width (8 Disks)Low-Profile, Modular Cutterbar

Made of High-Strength, NodularIron Castings

Shear-Protected Cutting Disks withReplaceable, Heat Treated Inserts

Two Free Swinging, ReversibleCutting Knives per Disk

Shear Protected Modules withReplaceable Drivers

Replaceable Skid PlateUnder Each Cutting Disk

Hydraulically Driven

Two Adjustable Gauge ShoesAdjustable Forming ShieldsTransport Warning Lights



SUGGESTEDLIST PRICE

USD ($)


BASE MACHINEEX-WORKS Ottumwa, Iowa.

Compatible with R450 or 4995 Windrower ONLY. If attaching R450 to old platform (SN -359999) order wiring harness AFH205053. If adapting 4995 to new platform (SN 360000-)order wiring harness AFH205054 through service parts.

1672E 994 Rotary Platform - 13 Ft. (4 m) 28,368.00

DESTINATION












994 Rotary Platform - 13 Ft. (4 m)Equipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)



A COMAR Net Charge for rust proofing will be added when this code is ordered.Same Price






Net Item Charge


Net Item Charge


0443 English/Spanish (U.S. ONLY)English and spanish operator manual and bilingual decals.

Same Price


Same Price


Same Price


Same Price


Same Price


Same Price


Same Price


1010 Urethane Roll ConditionerOriginal roll geometry. Does NOT include adjustable swathboard.106 In. (2680 mm) long with recessed intermittent cleats - 10 In. (254 mm) diameter.Quick-Adjust Roll Spacing.Adjustable Roll Pressure.Cushioned Roll Stops.4-V Power Band Belt Drive.

Same Price


994 Rotary Platform - 13 Ft. (4 m)Continued



SUGGESTEDLIST PRICE

USD ($)

CONDITIONER ...Continued...Gear and Shaft Driven Conditioner Rolls.

1025 V10 Steel Roll ConditionerOriginal roll geometry. Does NOT include adjustable swathboard.106 In. (2680 mm) long with ten intermeshing flutes in V-pattern - 10 In. (254 mm) diameter.4-V powerband belt to gearcase.Shaft drive to conditioner.Quick-Adjust Roll Spacing.Adjustable Roll Pressure.Cushioned Roll Stops.

900.00

1030 Tri-Lobe Steel Roll ConditionerOriginal roll geometry. Does NOT include adjustable swathboard.106 In. (2680 mm) long with three continuous contact intermeshing flutes - 10 In. (254 mm)diameter.4-V powerband belt to gearcase.Shaft drive to conditioner.Quick-Adjust Roll Spacing.Adjustable Roll Pressure.Cushioned Roll Stops.

10,032.00


Frame and Chassis:9005 Adjustable Swathboard Bundle (for Impeller Conditioner)

Includes swathboard bundle with complete components to mount on impeller platform. Alsocontains most of the components for the roll platform. BE24278 also needed to install the kiton a roll style conditioner platform. BE24278 plus BE24277 = BE24279.

176.00

9010 Adjustable Swathboard Bundle for Roll Conditioner 467.00



Conditioner:E94819 1000 rpm Impeller Conditioner Parts

Must order with E94820.See Parts

E94820 1000 rpm Impeller Conditioner PartsMust order with E94819.

See Parts

E125066 1000 rpm Roll Conditioner PartsMust order with E98362.

See Parts


See Parts

AE73791 Crop Deflector for Roll ConditionerAlso order (4) 19M7285 bolts and (4) E63527 nuts.

See Parts





SUGGESTEDLIST PRICE

USD ($)


Frame and Chassis:BE24277 Adjustable Swathboard Bundle (for Impeller Conditioner)


206.09

BE24279 Adjustable Swathboard Bundle for Roll Conditioner 504.50





14.5 Ft. (4.5 m) Cutting Width (9 Disks)Low-Profile, Modular Cutterbar










SUGGESTEDLIST PRICE

USD ($)




1675E 994 Rotary Platform - 14.5 Ft. (4.5 m) 30,577.00

DESTINATION












994 Rotary Platform - 14.5 Ft. (4.5 m)Equipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)









Net Item Charge


Net Item Charge



Same Price


Same Price


Same Price


Same Price


Same Price


Same Price


Same Price


1010 Urethane Roll ConditionerOriginal roll geometry. Does NOT include adjustable swathboard.106 In. (2680 mm) long with recessed intermittent cleats - 10 In. (254 mm) diameter.Quick-Adjust Roll Spacing.Adjustable Roll Pressure.Cushioned Roll Stops.4-V Power Band Belt Drive.

Same Price


994 Rotary Platform - 14.5 Ft. (4.5 m)Continued



SUGGESTEDLIST PRICE

USD ($)

CONDITIONER ...Continued...Gear and Shaft Driven Conditioner Rolls.

1025 V10 Steel Roll ConditionerOriginal roll geometry. Does NOT include adjustable swathboard.106 In. (2680 mm) long with ten intermeshing flutes in V-pattern - 10 In. (254 mm) diameter.4-V powerband belt to gearcase.Shaft drive to conditioner.Quick-Adjust Roll Spacing.Adjustable Roll Pressure.Cushioned Roll Stops.

900.00

1030 Tri-Lobe Steel Roll ConditionerOriginal roll geometry. Does NOT include adjustable swathboard.106 In. (2680 mm) long with three continuous contact intermeshing flutes - 10 In. (254 mm)diameter.4-V powerband belt to gearcase.Shaft drive to conditioner.Quick-Adjust Roll Spacing.Adjustable Roll Pressure.Cushioned Roll Stops.

10,032.00




176.00

9010 Adjustable Swathboard Bundle for Roll Conditioner 467.00






See Parts


See Parts


See Parts

AE73791 Crop Deflector for Roll ConditionerAlso order (4) 19M7285 bolts and (4) E63527 nuts.

See Parts





SUGGESTEDLIST PRICE

USD ($)




206.09

BE24279 Adjustable Swathboard Bundle for Roll Conditioner 504.50





16 Ft. (5 m) Cutting Width (10 Disks)Low-Profile, Modular Cutterbar










SUGGESTEDLIST PRICE

USD ($)




1661E 995 Rotary Platform - 16 Ft. (5 m) 36,078.00

DESTINATION












995 Rotary Platform - 16 Ft. (5 m)Equipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)

DESTINATION ...Continued...0166 Ukraine









Net Item Charge


Net Item Charge



Same Price


Same Price


Same Price


Same Price


Same Price


Same Price


Same Price


1010 Urethane Roll ConditionerRevised roll geometry with adjustable swathboard.106 In. (2680 mm) long with recessed intermittent cleats - 10 In. (254 mm) diameter.

Same Price





SUGGESTEDLIST PRICE

USD ($)

CONDITIONER ...Continued...Quick-Adjust Roll Spacing.Adjustable Roll Pressure.Cushioned Roll Stops.4-V Power Band Belt Drive.Gear and Shaft Driven Conditioner Rolls.

1025 V10 Steel Roll ConditionerRevised roll geometry with adjustable swathboard.106 In. (2680 mm) long with ten intermeshing flutes in V-pattern - 10 In. (254 mm) diameter.4-V powerband belt to gearcase.Shaft drive to conditioner.Quick-Adjust Roll Spacing.Adjustable Roll Pressure.Cushioned Roll Stops.

900.00

1030 Tri-Lobe Steel Roll ConditionerRevised roll geometry with adjustable swathboard.106 In. (2680 mm) long with three continuous contact intermeshing flutes - 10 In. (254 mm)diameter.4-V powerband belt to gearcase.Shaft drive to conditioner.Quick-Adjust Roll Spacing.Adjustable Roll Pressure.Cushioned Roll Stops.

10,032.00




176.00






See Parts

AE73791 Crop Deflector for Roll ConditionerFor platforms SN340796 and BELOW.NOT applicable to:- NEW platform orders.- ANY platform with V10 Steel Roll Conditioner.Also order (4) 19M7285 bolts and (4) E63527 nuts.

See Parts





SUGGESTEDLIST PRICE

USD ($)


Cutterbar:AE73055 Ramps for Cutterbar

Used with Roll Conditioner for a more uniform conditioning. For SN 340,796 and below only.See Parts



206.09

BE24279 Adjustable Swathboard Bundle for Roll ConditionerFor platforms SN340796 and BELOW.NOT applicable to:- NEW platform orders.- ANY platform with V10 Steel Roll Conditioner.Adjustable swathboard is included with these conditioners.

504.50

BE32357 Hydraulic Centerlink for W110 and W150 1,523.50




CUTTERBAR:Double or Single Knife System withScrew Adjustable Knife Hold-downs

GUARDS:Pointed Profile / Double Heat Treated

Long Point Forged Steel Guardsor Non Clog Profile Forged Steel Bottomand Forged Steel Top Guards

HEIGHT CONTROL AND FEEDING:Rigid Cutterbar with Spring Float on

W110 or W150 Traction Unit41.6 In. Wide (Front to Rear Dimension)

Draper Belts with Speed Sensor andVariable Speed

Adjustable Center Opening Width2 Adjustable Outboard Gauge Shoes2 Adjustable Inboard Gauge Shoes

REEL:Large 65 In. Effective diameter Cam reel with4 Position Adjustable Cam Release

Header Index Automatic Reeland/or Draper Belt Speed Control

with W110 or W150 WindrowersHydraulic Reel Position (Fore/Aft and Height)

DRIVES:Enclosed oil bath knife drive gearcase(s) with

Kevlar Knife Drive Belt(s)Timed Knife Drives on Dual Knife MachinesVariable Speed Hydraulic Reel Drive MotorVariable Speed Hydraulic Draper Belt Drive Motors

with Ribbed Drive RollersVariable Speed Hydraulic Knife Drive MotorSingle-Point Right Hand Hydraulic connection and

Error Proof Left Hand Hydraulic Line Connectionsto W110 and W150 Windrowers

MISCELLANEOUS:Road Transport Warning LightsVertical Crop Divider RodsOperator's Manual Holder under Left End Shield


SUGGESTEDLIST PRICE

USD ($)


BASE MACHINEEX-WORKS Winnipeg, MB or Port of EntryCompatible with W110 or W150 Windrowers ONLY. Not compatible with 4890, 4895, 4990,4995, A400, R450, or D450 models.

4270E 415D - 15 Ft. Draper Cutting PlatformCompatible with W110 or W150 Windrowers only.

45,530.00

DESTINATION






0237 New ZealandMachine is configured to ship in container.

Net Item Charge


415D - 15 Ft. Draper Cutting PlatformEquipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)





Net Item Charge


Net Item Charge



In Base Price


Same Price


Same Price


Same Price


Same Price


Same Price


Same Price

PACKAGE CONFIGURATIONS0801 Dual Knife Drive 9 Bat Steel Finger Reel Package - 15 Ft.

Non clog / Forged Steel GuardsFine Sections 14 Teeth per InchSingle Span 9 Bat ReelSteel FingerNo Deck Shift, Center Delivery Only2 Inboard Gauge Shoes2 Outboard Gauge ShoesCutterbar Full Width Poly Skid Shoes

2,646.00

0802 Dual Knife Drive 6 Bat Steel Finger Reel Package - 15 Ft.Pointed Profile / Double Heat Treated Forged SteelFine Sections 14 Teeth per InchSingle Span 6 Bat ReelSteel FingerNo Deck Shift, Center Delivery Only2 Inboard Gauge Shoes2 Outboard Gauge ShoesCutterbar Full Width Poly Skid Shoes

In Configuration


415D - 15 Ft. Draper Cutting PlatformContinued



SUGGESTEDLIST PRICE

USD ($)


Cutterbar:9030 Non Clog Guard Kit - 415D

Recommended for on ground cutting and tough cutting conditions. Kit is for replacement ofentire set of non clog guards.

1,985.00

Drives:9044 Auxiliary Vertical Knife Plumbing Kit

Includes quick attach couplers for quickly attaching and removing the vertical knives. Allowsattachment of vertical knife to multiple platforms.

727.00

9029 Double Draper Drive Kit (For Heavy Forage Side Delivery Applications)For heavy forage side delivery applications using deck shift. When used with the Top CropConveying Auger (TCCA), an additional hydraulic kit (BE32419) is required. Not compatiblewith draper extension kit.

2,116.00

9070 Hydraulic Drive Kit - Double Draper & Top Crop Converging AugerHydraulic kit is required to install both Top Crop Conveying Auger (TCCA) & Double DraperDrive (DDD) on a W110 or W150 Windrower. Not required when installing TCCA only orDDD only.

925.00

9042 Vertical Knife Mounts - LHDesigned for SABRE or ZIEGLER vertical knife. Includes template, hardware and someplumbing.

1,160.00

9043 Vertical Knife Mounts - RHDesigned for SABRE or ZIEGLER vertical knife. RH includes flow control, template, hardwareand some plumbing.

1,160.00

Feeding:9028 Draper Extension Kit

Recommended for lighter crops to make a more dense windrow. Allows easier harvesting ofcrop. Kit narrows swath opening by 20" (500mm). Not compatible with double draper drive.

372.00

9026 Hay Conditioner with Center Feed SectionThe Hay Conditioner mounts to 30 Ft. and smaller Double Knife Draper Platforms ONLY. Thehay conditioner is compatible with W150 Windrower ONLY. It is recommended to also orderreverser kit with the hay conditioner.

16,130.00

9036 6 Bat to 9 Bat Reel Conversion Kit - 415DAdds bats to improve feeding in heavy down crop conditions and specialty crops such as grassseed.

1,791.00

9045 Steel End Finger Kit for ReelSuggested for tough, down, tangled, or lodged crop conditions. Includes 3 fingers for one endof the reel. One set is needed for each end of the reel.

308.00

9023 Swath Forming Rods (Center Delivery)Recommended to make a narrower windrow. Typical for grass seed harvest.

925.00





SUGGESTEDLIST PRICE

USD ($)


9071 Top Crop Conveying Auger - 15 Ft.When used with the Double Draper Drive, and additional Hydraulic Kit (BE32388) isrequired. The Top Crop Conveying Auger is not recommended for most crops and conditions.Top Crop Conveying Auger recommended for Windrower use in the followingcrops/conditions:- Tall bulky over-ripe Canola- Any tall heavy forage crop such as sudan or cane crop types, where material flow through theopening is constricted.

3,283.00

Frame and Chassis:9049 Cutterbar Full Width Poly Skid Shoes and Hardware Kit - 415D

Recommended for on ground cutting. Complete replacement kit for shoes included in baseequipment.

725.00

9041 Inboard Gauge Shoes with Poly (Set of 2)Recommended for on ground cutting. Allows closer cutting and helps keep cutterbar out of theground. Set of 2 shoes with poly per bundle. Can order two sets for 435D and 440D, ordersingle set for 415D, 425D, 430D.

591.00

9090 Windrow Merger Attachment for W150Dealer Installed. Recommended for 140A and 160A auger platforms and 425D Ft. andnarrower under draper platforms. Requires hay conditioner with center feed section code 9026on draper platforms on to transfer crop to belt on double windrow attachment.

9,965.00

BALLASTING AND FLOAT SPRING RECOMMENDATIONSFor information on ballasting and windrower float springs requirements, please visit the AgSales Manual or the machine operator's manual.


Cutterbar:BE32389 Non Clog Guard Kit - 415D


2,183.50

Drives:BE32403 Auxiliary Vertical Knife Plumbing Kit


799.70

BE32388 Double Draper Drive Kit (For Heavy Forage Side Delivery Applications)For heavy forage side delivery applications using deck shift. When used with the Top CropConveying Auger (TCCA), an additional hydraulic kit (BE32419) is required. Not compatiblewith draper extension kit.

2,327.60

BE32385 Hydraulic Deck Shift Conversion KitAdds deck shift capability to these models: 425D Single Knife, 430D Single Knife, 435D SingleKnife, 435D Double Knife, 435D Double Knife Single Reel and 440D. In base equipment on allother models.

3,295.60





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BE32419 Hydraulic Drive Kit - Double Draper & Top Crop Converging Auger

Hydraulic kit is required to install both Top Crop Conveying Auger (TCCA) & Double DraperDrive (DDD) on a W110 or W150 Windrower. Not required when installing TCCA only orDDD only.

1,017.50

BE32401 Vertical Knife Mounts - LHDesigned for SABRE or ZIEGLER vertical knife. Includes template, hardware and someplumbing.

1,276.00

BE32402 Vertical Knife Mounts - RHDesigned for SABRE or ZIEGLER vertical knife. RH includes flow control, template, hardwareand some plumbing.

1,276.00

Feeding:BE32395 6 Bat to 9 Bat Reel Conversion Kit - 415D

Adds bats to improve feeding in heavy down crop conditions and specialty crops such as grassseed.

1,970.10

BE32387 Draper Extension KitRecommended for lighter crops to make a more dense windrow. Allows easier harvesting ofcrop. Kit narrows swath opening by 20" (500mm). Not compatible with double draper drive.

409.20

BE32379 End Swath Deflector Rods (For LH End)Recommended when using deck shift to reduce windrow laying on the uncut crop.

359.70

BE32380 End Swath Deflector Rods (For RH End)Recommended when using deck shift to reduce windrow laying on the uncut crop.

359.70

BE32386 Hay Conditioner with Center Feed SectionThe Hay Conditioner mounts to 30 Ft. and smaller Double Knife Draper Platforms ONLY. Thehay conditioner is compatible with W150 Windrower ONLY. It is recommended to also orderreverser kit with the hay conditioner.

17,743.00

BE32404 Steel End Finger Kit for ReelSuggested for tough, down, tangled, or lodged crop conditions. Includes 3 fingers for one endof the reel. One set is needed for each end of the reel.

338.80

BE32381 Swath Forming Rods (Center Delivery)Recommended to make a narrower windrow. Typical for grass seed harvest.

1,017.50

BE32413 Top Crop Conveying Auger - 15 Ft.When used with the Double Draper Drive, and additional Hydraulic Kit (BE32388) isrequired. The Top Crop Conveying Auger is not recommended for most crops and conditions.Top Crop Conveying Auger recommended for Windrower use in the followingcrops/conditions:- Tall bulky over-ripe Canola- Any tall heavy forage crop such as sudan or cane crop types, where material flow through theopening is constricted.

3,611.30

Frame and Chassis:BE32405 Cutterbar Full Width Poly Skid Shoes and Hardware Kit - 415D


797.50






SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BE32400 Inboard Gauge Shoes with Poly (Set of 2)

Recommended for on ground cutting. Allows closer cutting and helps keep cutterbar out of theground. Set of 2 shoes with poly per bundle. Can order two sets for 435D and 440D, ordersingle set for 415D, 425D, 430D.

650.10

BE32428 Windrow Merger Attachment for W150Dealer Installed. Recommended for 140A and 160A auger platforms and 425D Ft. andnarrower under draper platforms. Requires hay conditioner with center feed section code 9026on draper platforms on to transfer crop to belt on double windrow attachment.

10,961.50




CUTTERBAR:Double or Single Knife System with

Screw Adjustable Knife Hold-downs


Long Point Forged Steel Guards




Adjustable Center Opening Width2 Adjustable Outboard Gauge Shoes0 to 4 Adjustable Inboard Gauge Shoes

Depending on Package Configuration

REEL:Large 65 In. Effective diameter Cam reel with

4 Position Adjustable Cam ReleaseHeader Index Automatic Reel

and/or Draper Belt Speed Controlwith W110 or W150 Windrowers

Hydraulic Reel Position (Fore/Aft and Height)







SUGGESTEDLIST PRICE

USD ($)




51,187.00

DESTINATION







Net Item Charge





SUGGESTEDLIST PRICE

USD ($)





Net Item Charge


Net Item Charge



In Base Price


Same Price


Same Price


Same Price


Same Price


Same Price


Same Price

PACKAGE CONFIGURATIONS0806 Dual Knife Drive 6 Bat Steel Finger Reel Package - 20 Ft.

Pointed Profile / Double Heat Treated Forged Steel GuardsFine Sections 14 Teeth per InchSingle Span 6 Bat ReelSteel FingerNo Deck Shift, Center Delivery Only2 Inboard Gauge Shoes2 Outboard Gauge ShoesCutterbar Full Width Poly Skid Shoes

In Configuration






SUGGESTEDLIST PRICE

USD ($)




2,833.00



727.00


2,116.00


1,160.00


1,160.00



372.00


16,130.00


2,079.00


308.00


925.00



938.00


591.00





SUGGESTEDLIST PRICE

USD ($)



9,965.00





3,116.30



799.70


2,327.60

BE32385 Hydraulic Deck Shift Conversion KitAdds deck shift capability to these models: 425D Single Knife, 430D Single Knife, 435D SingleKnife, 435D Double Knife, 435D Double Knife Single Reel and 440D. In base equipment on allother models.

3,295.60


1,276.00


1,276.00



2,286.90


409.20


359.70





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BE32380 End Swath Deflector Rods (For RH End)

Recommended when using deck shift to reduce windrow laying on the uncut crop.359.70


17,743.00


338.80


1,017.50



1,031.80


BE32400 Inboard Gauge Shoes with Poly (Set of 2)Recommended for on ground cutting. Allows closer cutting and helps keep cutterbar out of theground. Set of 2 shoes with poly per bundle. Can order two sets for 435D and 440D, ordersingle set for 415D, 425D, 430D.

650.10


10,961.50



























SUGGESTEDLIST PRICE

USD ($)




58,415.00

DESTINATION







Net Item Charge





SUGGESTEDLIST PRICE

USD ($)





Net Item Charge


Net Item Charge



In Base Price


Same Price


Same Price


Same Price


Same Price


Same Price


Same Price

PACKAGE CONFIGURATIONS0810 Single Knife Drive 6 Bat Plastic Finger Reel Package - 25 Ft.

Pointed Profile / Double Heat Treated Forged SteelCoarse Sections 9 Teeth per InchSingle Span 6 Bat ReelPlastic FingerManual Deck Shift, Triple Delivery2 Inboard Gauge Shoes2 Outboard Gauge ShoesCutterbar Full Width Poly Skid Shoes

-10,664.00

0811 Dual Knife Drive 6 Bat Plastic Finger Reel Package - 25 Ft.Pointed Profile / Double Heat Treated Forged Steel GuardsFine Sections 14 Teeth per InchSingle Span 6 Bat ReelPlastic FingerHydraulic Deck Shift, Triple Delivery2 Inboard Gauge Shoes2 Outboard Gauge ShoesCutterbar Full Width Poly Skid Shoes

In Configuration





SUGGESTEDLIST PRICE

USD ($)




3,290.00

9081 Spare Knife, One-Piece with Knife Head Coarse Cut - 25 Ft.Compatible with Single Knife platform package 0810 only.

695.00



727.00


2,116.00


925.00

9024 Hydraulic Deck Shift Conversion KitAdds deck shift capability to these models: 425D Single Knife, 430D Single Knife, 435D SingleKnife, 435D Double Knife Single Reel and 440D. In base equipment on all other models.

2,996.00


1,160.00


1,160.00



372.00

9021 End Swath Deflector Rods (For LH End)Recommended when using deck shift to reduce windrow laying on the uncut crop.

327.00

9022 End Swath Deflector Rods (For RH End)Recommended when using deck shift to reduce windrow laying on the uncut crop.

327.00


16,130.00


2,398.00





SUGGESTEDLIST PRICE

USD ($)



308.00


925.00

9072 Top Crop Conveying Auger - 25 Ft.When used with the Double Draper Drive, and additional Hydraulic Kit (BE32388) isrequired. The Top Crop Conveying Auger is not recommended for most crops and conditions.Top Crop Conveying Auger recommended for Windrower use in the followingcrops/conditions:- Tall bulky over-ripe Canola- Any tall heavy forage crop such as sudan or cane crop types where material flow through theopening is constricted.

3,785.00



1,152.00


591.00


9,965.00





3,619.00



799.70


2,327.60





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BE32385 Hydraulic Deck Shift Conversion Kit

Adds deck shift capability to these models: 425D Single Knife, 430D Single Knife, 435D SingleKnife, 435D Double Knife Single Reel and 440D. In base equipment on all other models.

3,295.60

BE32419 Hydraulic Drive Kit - Double Draper & Top Crop Converging AugerHydraulic kit is required to install both Top Crop Conveying Auger (TCCA) & Double DraperDrive (DDD) on a W110 or W150 Windrower. Not required when installing TCCA only orDDD only.

1,017.50


1,276.00


1,276.00



2,637.80


409.20


359.70


359.70


17,743.00


338.80


1,017.50

BE32414 Top Crop Conveying Auger - 25 Ft.When used with the Double Draper Drive, and additional Hydraulic Kit (BE32388) isrequired. The Top Crop Conveying Auger is not recommended for most crops and conditions.Top Crop Conveying Auger recommended for Windrower use in the followingcrops/conditions:- Tall bulky over-ripe Canola- Any tall heavy forage crop such as sudan or cane crop types where material flow through theopening is constricted.

4,163.50



1,267.20





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BE32357 Hydraulic Centerlink for W110 and W150 1,523.50


650.10


10,961.50























SUGGESTEDLIST PRICE

USD ($)




66,428.00

DESTINATION







Net Item Charge





SUGGESTEDLIST PRICE

USD ($)





Net Item Charge


Net Item Charge



In Base Price


Same Price


Same Price


Same Price


Same Price


Same Price


Same Price


Pointed Profile / Double Heat Treated Forged Steel GuardsCoarse Sections 9 Teeth per InchSingle Span 5 Bat ReelPlastic FingerManual Deck Shift, Triple Delivery2 Outboard Gauge Shoes

-14,466.00

0816 Dual Knife Drive 6 Bat Plastic Finger Split Reel Package - 30 Ft.Pointed Profile / Double Heat Treated Forged Steel GuardsFine Sections 14 Teeth per InchSplit Span 6 Bat ReelPlastic FingerHydraulic Deck Shift, Triple Delivery4 Inboard Gauge Shoes2 Outboard Gauge ShoesCutterbar Full Width Poly Skid Shoes

In Configuration





SUGGESTEDLIST PRICE

USD ($)




3,864.00


974.00



727.00


2,116.00


925.00


2,996.00


1,160.00


1,160.00



372.00


327.00


327.00


16,130.00

9039 6 Bat to 9 Bat Split Reel Only Conversion Kit - 430DAdds bats to improve feeding in heavy down crop conditions and specialty crops such as grassseed.

3,738.00





SUGGESTEDLIST PRICE

USD ($)



308.00


925.00


5,582.00


Recommended for on ground cutting. Complete replacement kit for shoes included in baseequipment with package 0816 only.

1,160.00

9085 Gauge WheelsCompatible with 430D, 435D, and 440D models ONLY. With 25 Ft. and narrower draperplatforms, gauge wheels are not compatible or needed. The platform is supported by thetraction unit for off ground cutting and by the gauge shoes for on ground cutting.

3,094.00

9096 Gauge Wheels and Integrated Slow Speed Road Transport SystemCompatible with 430D, 435D, and 440D models ONLY. Do not exceed 25 MPH (40 KPH).

Gauge Wheels / Integrated Slow-speed Transport Package may be towed behind a Windrowerwhen using a weight box. Transport must not exceed 25 mph (40 kph) when being towed.Towing vehicle (W150 Windrower or tractor only) must have 7 pin electrical outlet forwarning lights and is limited to 25 mph.

7,075.00


591.00





4,250.40





SUGGESTEDLIST PRICE

USD ($)




799.70


2,327.60

BE32385 Hydraulic Deck Shift Conversion KitAdds deck shift capability to these models: 425D Single Knife, 430D Single Knife, 435D SingleKnife, 435D Double Knife Single Reel and 440D. In base equipment on all other models.

3,295.60


1,017.50


1,276.00


1,276.00

Feeding:BE32398 6 Bat to 9 Bat Split Reel Only Conversion Kit - 430D


4,111.80


409.20


359.70


359.70


17,743.00


338.80


1,017.50





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BE32415 Top Crop Conveying Auger - 30 Ft.

When used with the Double Draper Drive, and additional Hydraulic Kit (BE32388) isrequired. The Top Crop Conveying Auger is not recommended for most crops and conditions.Top Crop Conveying Auger recommended for Windrower use in the followingcrops/conditions:- Tall bulky over-ripe Canola- Any tall heavy forage crop such as sudan or cane crop types where material flow through theopening is constricted.

6,140.20


Recommended for on ground cutting. Complete replacement kit for shoes included in baseequipment with package 0816 only.

1,276.00

BE32426 Gauge WheelsCompatible with 430D, 435D, and 440D models ONLY. With 25 Ft. and narrower draperplatforms, gauge wheels are not compatible or needed. The platform is supported by thetraction unit for off ground cutting and by the gauge shoes for on ground cutting.

3,403.40

BE32430 Gauge Wheels and Integrated Slow Speed Road Transport SystemCompatible with 430D, 435D, and 440D models ONLY. Do not exceed 25 MPH (40 KPH).


7,782.50



650.10























SUGGESTEDLIST PRICE

USD ($)




63,895.00

DESTINATION







Net Item Charge





SUGGESTEDLIST PRICE

USD ($)





Net Item Charge


Net Item Charge



In Base Price


Same Price


Same Price


Same Price


Same Price


Same Price


Same Price


Pointed Profile / Double Heat Treated Forged Steel GuardsCoarse Sections 9 Teeth per InchSingle Span 5 Bat ReelPlastic FingerManual Deck Shift, Triple Delivery2 Outboard Gauge Shoes

-8,705.00

0821 Dual Knife Drive 5 Bat Plastic Finger Reel Package - 35 Ft.Pointed Profile / Double Heat Treated Forged Steel GuardsFine Sections 14 Teeth per InchSingle Span 5 Bat ReelPlastic FingerManual Deck Shift, Triple Delivery4 Inboard Gauge Shoes2 Outboard Gauge ShoesCutterbar Full Width Poly Skid Shoes

In Configuration

0822 Dual Knife Drive 6 Bat Plastic Finger Split Reel Package - 35 Ft.Pointed Profile / Double Heat Treated Forged Steel Guards

5,013.00





SUGGESTEDLIST PRICE

USD ($)

PACKAGE CONFIGURATIONS ...Continued...Fine Sections 14 Teeth per InchSplit Span 6 Bat ReelPlastic FingerHydraulic Deck Shift, Triple Delivery4 Inboard Gauge Shoes2 Outboard Gauge ShoesCutterbar Full Width Poly Skid Shoes




4,547.00


1,086.00



727.00


2,116.00


925.00


2,996.00


1,160.00


1,160.00



372.00


327.00





SUGGESTEDLIST PRICE

USD ($)



327.00


308.00


925.00


5,833.00


Recommended for on ground cutting. Complete replacement kit for shoes. Included in baseequipment with packages 0821 and 0822.

1,339.00


3,094.00



7,075.00


591.00





5,001.70





SUGGESTEDLIST PRICE

USD ($)




799.70


2,327.60


3,295.60


1,017.50


1,276.00


1,276.00

Feeding:BE32387 Draper Extension Kit


409.20


359.70


359.70


338.80


1,017.50


6,416.30





SUGGESTEDLIST PRICE

USD ($)



Recommended for on ground cutting. Complete replacement kit for shoes. Included in baseequipment with packages 0821 and 0822.

1,472.90


3,403.40



7,782.50



650.10























SUGGESTEDLIST PRICE

USD ($)



4320E 440D - 40 Ft. Draper Cutting PlatformCompatible with W150 Windrowers only. (Not recommended for W110. Power level is bettermatched with the W150)

69,279.00

DESTINATION







Net Item Charge





SUGGESTEDLIST PRICE

USD ($)





Net Item Charge


Net Item Charge



In Base Price


Same Price


Same Price


Same Price


Same Price


Same Price


Same Price

PACKAGE CONFIGURATIONS0825 Dual Knife Drive 5 Bat Plastic Finger Split Reel Drive Package - 40 Ft.

For US, Canada, and Mexico markets only.Pointed Profile / Double Heat Treated Forged Steel GuardsCoarse Sections 9 Teeth per InchSplit Span 5 Bat ReelPlastic FingerManual Deck Shift, Triple Delivery2 Outboard Gauge ShoesCutterbar Full Width Poly Skid Shoes.

In Configuration

0826 Dual Knife Drive 5 Bat Plastic Finger Split Reel Drive Package - 40 Ft.Export configuration with split frame for containerization. For markets outside US, Canada,and Mexico only.Pointed Profile / Double Heat Treated Forged Steel GuardsCoarse Sections 9 Teeth per InchSplit Span 5 Bat ReelPlastic FingerManual Deck Shift, Triple Delivery2 Outboard Gauge ShoesCutterbar Full Width Poly Skid Shoes.

In Configuration





SUGGESTEDLIST PRICE

USD ($)

PACKAGE CONFIGURATIONS ...Continued...


Cutterbar:9084 Spare Knife set with Knife Head Coarse Cut - 40 Ft.

Compatible with Double Knife 40 Ft. platform only.1,174.00



727.00


2,116.00


925.00


2,996.00


1,160.00


1,160.00



372.00


327.00


327.00


308.00


925.00





SUGGESTEDLIST PRICE

USD ($)



6,116.00


Recommended for on ground cutting.1,521.00


3,094.00



7,075.00


591.00





799.70


2,327.60


3,295.60


1,017.50





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BE32401 Vertical Knife Mounts - LH

Designed for SABRE or ZIEGLER vertical knife. Includes template, hardware and someplumbing.

1,276.00


1,276.00

Feeding:BE32387 Draper Extension Kit


409.20


359.70


359.70


338.80


1,017.50


6,727.60


Recommended for on ground cutting.1,673.10


3,403.40



7,782.50



650.10







OPERATOR STATION:Air Conditioned and Heated CabDeluxe SeatTraining Seat with Cool BoxArm RestsOperator Presence Safety SwitchSafety Belts for Driverand Training Seat

Radio Installation Kit (Includestwo speakers and antenna)

Front Windshield Wiper and WasherAdjustable Steering ColumnTelescoping Steering WheelHydrostatic Power SteeringAutomatic Header Position ControlHydraulic Flotation for HayPick-Up Harvesting Units

Electronic Acre Counter inRight Corner Post

Built-In Electronic DiagnosticsConvenience Outlets for Power

LIGHTING EQUIPMENT:Halogen On-Highway HeadlightsHalogen Field Working LightsFront Field Working LightsRowfinder Field LightsSpout LightRear Hitch LightFront Clearance and Turn Signal LightsRear Stop and Turn SignalSMV SignCab Dome LightLadder LightRotating Beacon Light

DRIVE SYSTEM:Hydraulic Individual Wheel BrakesHydrostatic Ground Drive with3-Speed Transmission

Heavy-Duty Final Drives with95:10 Gear Ratio

ENGINE:John Deere 6 Cylinder 9.0L DieselPower Tech EngineTier III Emissions Compliant375 Hp (ECE R120 @ 1900 RPM)Direct Drive Engine FanSelf-Cleaning Rotary Air Screenwith Rotary Brushes

CUTTING SYSTEM:IntelliGuard Metal Detection SystemFeed Rolls (28 In. Wide) withElectric Clutch

CUTTERHEAD:Dura-Drum, 40 Knife28 In. Wide, 26 In. Diameter1000 RPMAutomatic In-Cab Knife SharpeningStationary Knife with Tungsten

Carbide Vertical EdgeAutomatic In-Cab Stationary Knife

Sharpening AdjustmentElectro-Hydraulic Main ClutchInfinitely Variable Length

of Cut TransmissionAutoLOC Automatic Length of Cut

Software Logic (Optional HarvestLabMoisture Sensor Required to Enable

AutoLOC Functionality)Spiral Type Cutterhead BandWear Resistant All-Crop Chute

BLOWER:20 In. Wide, 18 In. Diameter1800 RPMShort Flat Spout200-Degree Spout Rotation Control

ELECTRICAL SYSTEM:12-Volt Electrical System with

One 150 Amp AlternatorUniversal Power Outlet StripOne Wet-Charged Battery 12V - 174 AHBattery Disconnect Switch

CHASSIS:Attaching Frame for Harvesting UnitsStandard Lift Cylinders for Harvesting UnitsRear Weight Carrier

TIRES:Wheels and Tires, Front:

800/65R32 172A8 R1WWheels and Tires, Rear:

580/70R26 149A8 R1WHeavy-Duty, Non-Adjustable 2WD Axle

MISCELLANEOUS:Support Stands for Removal of

Cutterhead and Feedroll Housing291 U.S. (1100 L) Gallon Fuel TankStandard Rear Hitch and Rear Weight CarrierFire Extinguishers; (1) Dry and (1) Liquid


SUGGESTEDLIST PRICE

USD ($)


BASE MACHINEEX-WORKS Point of Entry

2625Z 7180 Self-Propelled Forage Harvester 235,790.00

AGRICULTURAL PRODUCTSJOHN DEERE FORAGE EQUIPMENT

7180 Self-Propelled Forage HarvesterEquipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)


DESTINATION0202 United States In Base Price


OPERATORS MANUAL0409 English In Base Price

OPERATOR STATION & CONTROLS1202 Driver Seat with Air-Suspension Seat and Seat Belt

Includes seat belt for training seat.In Base Price

REAR VIEW MIRROR1310 Two Side-Mounted Rear View Mirrors - Manually Adjusted In Base Price

1320 Two Side-Mounted Rear View Mirrors - Electrically Adjusted and Heated 714.00

FIELD LIGHTS1361 Four Halogen Field Lights in the Cab Roof In Base Price

1376 Field Vision Xenon HID Lighting Package1) Xenon (HID) lighting provides maximum brightness for optimum night visibility.2) Includes Two Halogen and Two Xenon High Intensity Discharge (HID) Working Lights inCab Roof.

1,524.00

1378 Field Vision Xenon HID Lighting Package with Platform Lights1) Xenon (HID) lighting provides maximum brightness for optimum night visibility.2) Includes Two Halogen and Two Xenon High Intensity Discharge (HID) Working Lights inCab Roof.3) Also includes Two Xenon High Intensity Discharge (HID) Working Lights in Platform.4) Not orderable with Code 8137.

1,795.00

FIRE EXTINGUISHER1606 2.5 Gallon Water Fire Extinguisher and 6 kg Powder Fire Extinguisher In Base Price

AG MANAGEMENT SOLUTIONS1800 GreenStar Ready In Base Price

1809 GreenStar, HarvestLab, Harvest Monitor, and Harvest Doc Ready1) Prepares Harvester for common AMS components.2) Includes Harvest Monitor hardware, StarFire 3000 receiver bracket, and HarvestLabReady Spout.3) Does NOT include GreenStar 3 Display, StarFire 3000 receiver or HarvestLab MoistureSensor. Purchase separately from AMS.4) Compatible with GreenStar 3 2630 Display or GreenStar 2 2600 Display.5) Will function as yield monitor with addition of GreenStar 3 2630 Display or GreenStar 22600 Display.

4,538.00

1815 AutoTrac RowSense, Manual RowSense, and AutoTrac Ready1) Does not include GreenStar 3 2630 Display, StarFire 3000 receiver, or AutoTrac RowSense

4,240.00


7180 Self-Propelled Forage HarvesterContinued



SUGGESTEDLIST PRICE

USD ($)

AG MANAGEMENT SOLUTIONS ...Continued...Activation. Purchase separately from the AMS Price Pages.2) Capable of running RowSense functions, but header feelers must be ordered separately. IfAutoTrac and AutoTrac RowSense are to be operated together, then an AutoTrac RowSenseActivation is required in addition to a GreenStar 3 2630 or GreenStar 2 2600 Display and aStarFire 3000 or iTC Receiver. Manual RowSense does not require any activations oradditional equipment.3) RowSense feelers can be added as a factory option for new headers.4) RowSense feelers can be ordered from PDC for field conversion.

1812 GreenStar HarvestLab / Harvest Monitor / Harvest Doc / RowSense / AutoTrac Ready1) Does NOT include RowSense components required for Harvesting Unit, GreenStar 3Display, StarFire 3000 receiver, HarvestLab Moisture Sensor, purchased separately from AMSPrice Pages.2) Compatible with GreenStar 3 2630 Display or GreenStar 2 2600 Display.3) Will function as yield monitor with addition of GreenStar 3 2630 Display or GreenStar 22600 Display.

8,778.00

JDLINK1887 JDLink Ultimate Promotion - 1 year subscription included

1) Includes JDLink hardware: integrated cab wiring harness, antenna, modular telematicsgateway (MTG) with Service ADVISOR Remote capability, and JDLink Ultimate activation,and 1 year subscription to JDLink Ultimate service.2) In addition to JDLink Select features: machine utilization information, machine reports,machine diagnostics.3) JDLink customer account must be created to access JDLink Ultimate data.4) Annual subscription renewal required after first year of service for continued functionality.5) Only available in US and Canada.

In Base Price

1888 JDLink Ultimate Promotion - 3 year subscription included1) Includes JDLink hardware: integrated cab wiring harness, antenna, modular telematicsgateway (MTG) with Service ADVISOR Remote capability, and JDLink Ultimate activation,and 3 year subscription to JDLink Ultimate service.2) In addition to JDLink Select features: machine utilization information, machine reports,machine diagnostics.3) JDLink customer account must be created to access JDLink Ultimate data.4) Annual subscription renewal required after third year of service for continued functionality.5) Only available in US and Canada.

1,200.00

TRANSMISSION2052 3 Speed Manual-Shift Transmission - 19 mph (30 km/h)

Not compatible with Code 2235.In Base Price

REAR AXLE2210 Non-Powered, Heavy-Duty, Non-Adjustable Rear Axle

1) Fixed 2802 mm (110 In.) length without tires.2) See Tires Spacing Chart in the Agricultural Sales Manual for tread spacings available withspecific tires.3) Rim offset used to adjust rear tread spacing.4) Rear axle capacity is 8.5 ton.

In Base Price

2230 Powered, Non-Adjustable Rear Axle1) NOT compatible with ProDrive Transmission Code 2063.2) Fixed 2802 mm (110 In.) length without tires.3) See Tires Spacing Chart in the Agricultural Sales Manual for tread spacings available withspecific tires.4) Rim offset used to adjust rear tread spacing.

23,357.00





SUGGESTEDLIST PRICE

USD ($)

REAR AXLE ...Continued...5) Rear axle capacity is 8.5 ton.

ADVANCED HEADER HEIGHT CONTROL2400 LESS Advanced Header Height Control In Base Price

2415 Advanced Header Height ControlIncludes:1) Automatic Header Height Control with Powered Lateral Tilt.2) Return to Cut Height.3) Automatic Float Control.4) Active Header Damping for Road Transport.Requires header equipment with:- Lateral tilt mounting frame- Sensors, Harvesting Unit - Advanced Header Height Control, Code 6200 or LCA94223.NOT compatible with High Flow Rear Hydraulic Outlet, Codes 8603, INSTEAD order fieldinstalled BZ100203 Flow Rear Hydraulic Outlet.NOT compatible with:- Ridge-till rows- Row spacings under 30 In.Limits minimum crop cut height (stubble height) to NOT less than 6 In.

3,593.00

GREASE SYSTEM2500 Manual Grease Banks In Base Price

2510 Auto Lube System - Base Machine ONLY1) Lubes base machine and non-powered or powered rear axle.2) Requires grass chute Code 3710.3) Requires BZ13798 Auto Lube System-Kernel Processor if Field Installed KP is ordered.

8,234.00

2515 Auto Lube System - Base Machine and Kernel Processor1) Requires Code 3731, 3732, 3741 or 3742 Factory Installed KP.2) Lubes base machine, factory installed KP, and non-powered or powered rear axle. 51Grease points.3) BZ13798 Auto Lube System-Kernel Processor must be ordered for a field installed kernelprocessor.4) Cannot be ordered together with grass chute Code 3710.

9,300.00

MACHINE CONFIGURATION2700 Standard In Base Price

2720 Extended Wear (DuraLine)NOT orderable with LESS Discharge Spout (Code 5590).

5,884.00

LENGTH OF CUT TRANSMISSION3120 IVLOC Transmission In Base Price

CUTTERHEAD FEEDROLLS3310 Upper Front Feedroll with Straight Replaceable Teeth 602.00

3320 Upper Front Feedroll with Spiral Teeth In Base Price





SUGGESTEDLIST PRICE

USD ($)

CUTTERHEAD FEEDROLLS ...Continued...3330 Upper Front Feedroll with Straight Replaceable Smooth Bars

1) Recommended for tall grass crops like barley and wheat.2) Not recommended for corn.

602.00

CUTTERHEAD TO BLOWER CHUTE OR KERNEL PROCESSOR

Cutterhead to Blower Chute3710 Wear Resistant All Crop Curved Chute

1) Provides crop path from cutterhead to blower when Kernel Processor is not installed.2) Provides maximum crop chute life in highly abrasive, high usage hour conditions.

In Base Price

Quick Change Kernel Processor - Factory Installed3731 Kernel Processor (Quick Change), Standard Rolls with Manually Adjustable Roll Clearance.

1) Standard Sawtooth (107 Teeth) KP Rolls.2) Includes drive parts for 1800 RPM blower speed.3) Includes Manually Driven KP Chain Hoist.4) Code 9370 Field Installed Wear Resistant Chute required to operate machine with KPremoved.5) AZ57329 Standard KP Adaptor Cover required to operate machine with KP in raisedposition IF Code 9370 Wear Resistant Chute is NOT ordered. See Parts.6) Code 8380 Electric Drive Upgrade for KP Chain Hoist strongly recommended to quicklyraise or lower KP when changing between grass or alfalfa and corn crops.7) Not for use in grass or alfalfa crops.8) 21% roll speed ratio.

19,264.00

3732 Kernel Processor (Quick Change), Wear Resistant Rolls with Manually Adjustable RollClearance1) Chrome Plated Sawtooth (107 Teeth) KP Rolls.2) Includes drive parts for 1800 RPM blower speed.3) Includes Manually Driven KP Chain Hoist.4) Code 9370 Field Installed Wear Resistant Chute required to operate machine with KPremoved.5) AZ57329 Standard KP Adaptor Cover required to operate machine with KP in raisedposition IF Code 9370 Wear Resistant Chute is NOT ordered. See Parts.6) Code 8380 Electric Drive Upgrade for KP Chain Hoist strongly recommended to quicklyraise or lower KP when changing between grass or alfalfa and corn crops.7) Not for use in grass or alfalfa crops.8) 21% roll speed ratio.

21,564.00

3741 Kernel Processor (Quick Change), Standard Rolls and Electrically Adjustable RollClearance1) Standard Sawtooth (107 Teeth) KP Rolls.2) Includes drive parts for 1800 RPM blower speed.3) Includes Manually Driven KP Chain Hoist.4) Code 9370 Field Installed Wear Resistant Chute required to operate machine with KPremoved.5) AZ57329 Standard KP Adaptor Cover required to operate machine with KP in raisedposition IF Code 9370 Wear Resistant Chute is NOT ordered. See Parts.6) Code 8380 Electric Drive Upgrade for KP Chain Hoist strongly recommended to quicklyraise or lower KP when changing between grass or alfalfa and corn crops.7) Not for use in grass or alfalfa crops.8) Enables on-the-go roll clearance adjustments from the cab.

19,927.00





SUGGESTEDLIST PRICE

USD ($)

CUTTERHEAD TO BLOWER CHUTE OR KERNEL PROCESSOR...Continued...

3742 Kernel Processor (Quick Change), Wear Resistant Rolls and Electrically Adjustable RollClearance1) Chrome Plated Sawtooth (107 Teeth) KP Rolls.2) Includes drive parts for 1800 RPM blower speed.3) Includes Manually Driven KP Chain Hoist.4) Code 9370 Field Installed Wear Resistant Chute required to operate machine with KPremoved.5) AZ57329 Standard KP Adaptor Cover required to operate machine with KP in raisedposition IF Code 9370 Wear Resistant Chute is NOT ordered. See Parts.6) Code 8380 Electric Drive Upgrade for KP Chain Hoist strongly recommended to quicklyraise or lower KP when changing between grass or alfalfa and corn crops.7) Not for use in grass or alfalfa crops.8) Enables on-the-go roll clearance adjustments from the cab.9) 21% roll speed ratio.

22,226.00

CUTTERHEAD TYPE40 knife cutterheads provide longer minimum and maximum length of cut than 48 knifecutterheads.

4005 Dura-Drum with 40 Knives In Base Price

4007 Dura-Drum with 48 Knives 379.00

CUTTERHEAD KNIFE HOLDER TYPE4060 Standard Knife Holders In Base Price

4070 Hard-Faced Knife HoldersProvides maximum knife holder wear life in highly abrasive, high usage hour conditions.

1,165.00

CUTTERHEAD KNIFE AND SHEARBAR TYPE1) Grass knives are more resistant to wear from sand and small stones than corn knives.2) Grass knives provide better material flow in sticky alfalfa crops.3) Grass knives are less efficient in corn than corn knives.

4010 Straight Grass Knives with Grass Shearbar In Base Price

4012 Wide Corn Knives with Corn Shearbar 297.00

4014 Angled Corn Knives with Corn ShearbarMost efficient knife for corn.

418.00

DISCHARGE SPOUT5590 LESS Discharge Spout

Requires field installation of discharge chute already in dealer inventory.NOT compatible with:- Extended Wear Configuration (Code 2720).- Work Light for Discharge Spout (Code 8136).- Automatic Spout Positioning (Code 8112).- Rear Mounted Mirror (Code 8134).

-4,079.00

5591 Short Flat Discharge Spout1) Recommended when side loading into covered wagons or trucks.

In Base Price





SUGGESTEDLIST PRICE

USD ($)

DISCHARGE SPOUT ...Continued...2) Code 8115 Two-Speed Spout Rotation available for faster rotation speed.3) Code 8115 in base equipment on 7980.4) Not orderable with rear mounted mirror Code 8134.

5594 Long Flat Discharge Spout1) Recommended when loading into towed wagons.2) Code 8115 Two-Speed Spout Rotation available for faster rotation speed.3) Code 8115 in base equipment on 7980.4) Not orderable with rear mounted mirror Code 8134.

624.00

5597 High Arch Discharge Spout1) Recommended when side loading into open top wagons or trucks.2) Code 8115 Two-Speed Spout Rotation available for faster rotation speed.3) Code 8115 in base equipment on 7980.

770.00

TRAILER HITCH6405 Bracket for Trailer Hitch (Without Hitch) In Base Price

WHEELS AND TIRES (FRONT AND REAR)1) Tire load index rating must be appropriate for harvesting units used. See the AgriculturalSales Manual.2) 25 mph (40 km/h) ProDrive Transmission (Code 2063) requires front tires with load indexrating of 172A8 or higher and rear tires with load index rating of 149A8 or higher.

TIRE OPTIONS WITH NARROW STANCE6730 620/75R34 In. 170A8 (Front)

480/80R26 In. 160A8 (Rear)Michelin Front and Continental Rear.Width: Front and Rear: 3000 mm (9.8 Ft.)

-3,078.00

6611 650/75R32 In. 172A8 (Front)480/80R26 In. 160A8 (Rear)Continental Front and Goodyear Rear.Standard Body Width:Front and Rear: 3150 mm (10 Ft. 4 In.)

Wide Body Width:Front: 3300 mm (10 Ft. 8 In.)Rear: 3150 mm (10 Ft. 4 In.)

-2,250.00

6621 650/75R32 In. 172A8 R1W (Front)480/80R26 In. 160A8 R4 (Rear)NOT compatible with:690, 692, 710 or 770 harvesting unit applications regardless of transmission type.

Goodyear Front and RearMinimum Overall Width:Front: 3150 mm (10 Ft. 4 In.)

Available Tread Settings:Front: 98 In. OnlyRear: 105 In. Only

-2,250.00





SUGGESTEDLIST PRICE

USD ($)

WHEELS AND TIRES (FRONT AND REAR) ...Continued...6661 800/65R32 In. 172A8 R1W (Front)

480/80R26 In. 160A8 R4 (Rear)Goodyear Front and RearMinimum Overall Width:Front: 3400 mm (11 Ft. 2 In.)


-700.00

6663 800/65R32 In. 172A8 R1W (Front)540/65R30 In. 156A8 R4 (Rear)Goodyear Front and Continental RearMinimum Overall Width:Front: 3400 mm (11 Ft. 2 In.)


In Base Price

6672 800/65R32 In. 172A8 R1W (Front)480/80R26 In. 160A8 R4 (Rear)Michelin Front and RearMinimum Overall Width:Front: 3400 mm (11 Ft. 2 In.)


-700.00

6683 800/65R32 In. 172A8 R1W (Front)540/65R30 In. 142A8 R1W (Rear)Continental Front and RearMinimum Overall Width:Front: 3500 mm (11 Ft. 4 In.)


Same Price

6673 800/65R32 In. 172A8 R1W (Front)540/65R30 In. 156A8 R1W (Rear)Michelin Front and Continental RearMinimum Overall Width:Front: 3500 mm (11 Ft. 4 In.)


Same Price

6684 800/65R32 In. 178A8 R1W (Front)600/65R28 In. 149A8 R1W (Rear)Continental Front and RearMinimum Overall Width:Front: 3500 mm (11 Ft. 4 In.)


1,514.00

6742 800/65R32 In. 178A8 R1W Radial (Front)480/80R26 In. 160A8 R4 Radial (Rear)Trelleborg Front and Michelin RearMinimum Overall Width:Front: 3400 mm (11 Ft. 2 In.)


-716.00





SUGGESTEDLIST PRICE

USD ($)

WHEELS AND TIRES (FRONT AND REAR) ...Continued...6744 800/65R32 In. 178A8 R1W Radial (Front)

600/65R28 In. 156A8 R1W Radial (Rear)Trelleborg Front and Continental RearMinimum overall width:Front: 3400 mm (11 Ft. 2 In.)


1,054.00

6743 800/65R32 In. 178A8 R1W Radial (Front)540/65R30 In. 156A8 R1W Radial (Rear)Trelleborg Front and Continental RearMinimum overall width:Front: 3500 mm (11 Ft. 4 In.)Rear: 3300 mm (10 Ft. 8 In.)

-16.00

TIRE OPTIONS WITH WIDE STANCE6626 650/75R32 In. 172A8 R1W (Front)

540/65R30 In. 156A8 R1W (Rear)Goodyear Front and Continental RearMinimum Overall Width:Front: 3700 mm (12 Ft. 2 In.)


1) Recommended for 30 In. or 40 In. row crop spacings.2) Includes axle truss rod, 62 mm (2.4 In.) final drive spacers, and 28 mm (1.1 In.) wheelspacers.

-1,550.00

6627 650/75R32 In. 172A8 R1W (Front)600/65R28 In. 156A8 R1W (Rear)Goodyear Front and Continental RearMinimum Overall Width:Front: 3700 mm (12 Ft. 2 In.)



-480.00



1) Recommended for 30 In. or 40 In. row crop spacings.2) Includes axle truss rod and 62 mm (2.4 In.) final drive spacers.

Same Price





SUGGESTEDLIST PRICE

USD ($)





1,070.00



Includes axle truss rod and 62 mm (2.4 In.) final drive spacers.

2,816.00

6746 800/65R32 In. 178A8 R1W (Front)540/65R30 In. 156A8 R1W (Rear)Trelleborg Front and Continental RearMinimum Overall width:Front: 3850 mm (12 Ft. 6 In.)Rear: 3300 mm (10 Ft. 8 In.)

-16.00

6747 800/65R32 In. 178A8 R1W Radial (Front)600/65R28 In. 156A8 R1W Radial (Rear)Trelleborg Front and Continental RearMinimum Overall width:Front: 3850 mm (12 Ft. 6 In.)Rear: 3500 mm (11 Ft. 4 In.)

1,054.00

6745 800/65R32 In. 178A8 R1W (Front)480/80R26 In. 160A8 R4 (Rear)Trelleborg Front and Michelin RearMinimum Overall width:Front: 3850 mm (12 Ft. 8 In.)



-716.00

TIRE OPTIONS WITH DUALS:6605 480/80R26 160A8 Goodyear Rear Tires

Must be ordered with Code 8690.-9,888.00

6607 540/65R30 156A8 Continental Rear TiresMust be ordered with Code 8690.

-9,188.00


-7,658.00

BALLASTING





SUGGESTEDLIST PRICE

USD ($)

BALLASTING ...Continued...7300 Without Ballasting

Machines are limited to 5 km/h (3 mph) regardless of transmission type.In Base Price

7305 18 Quick-Attach Weights 40 Kg (88 Lb.) 2,322.00

7310 22 Quick-Attach Weights 40 Kg (88 Lb.) Plus Rear Tire Water Filling 6,824.00

7330 14 Rear Chassis Plates 3,987.00

7315 22 Quick-Attach Weights 40 Kg (88 Lb.) and 14 Rear Chassis Plates 6,824.00

SPECIAL EQUIPMENT - FACTORY INSTALLED

Cutterhead:8406 1150 RPM Cutterhead Speed with 1800 RPM Blower Speed 360.00

8322 Cutterhead Feedroll Spring UpgradeIncludes second set of feedroll springs.

118.00

9321 Anti-Accumulation KitReduces crop buildup around feedrolls.

283.00

Discharge Spout:8112 Automatic Spout Positioning

1) Allows operator to pre-set up to 8 Spout positions, including height, rotation, and capposition. Also features return to transport position.2) Not orderable without a spout Code 5590.

764.00

8115 Spout Rotation, Two-Speed1) Provides faster rotation speed when moving discharge spout side to side while harvesting.2) Not orderable without a spout Code 5590.

781.00

Engine:8701 Engine Coolant Heater (110V) 93.00

8704 Exhaust Pipe Extension 102.00

8702 Ether Starting Aid Kit 176.00

Frame and Chassis:8134 Rear Mirror

Provides view of rear end of harvester for backing or hitching.Requires High Arch Discharge Spout (Code 5597).

140.00





SUGGESTEDLIST PRICE

USD ($)


Hydraulics:8601 Double Acting Hydraulic Outlet

1) Required to fold 676, 686, 678, 698, 690, 692 or 770 harvesting units or optionalhydraulically folded gauge wheels on 630C, 640C, or 645C hay pickups.2) Code 8600 or BZ100175 Single Acting Hydraulic Outlet STILL required to enable haypickup harvesting unit feature that AUTOMATICALLY raises compressor sheet whencutterhead feedrolls stop.3) Can be used in lieu of code 8600 or BZ100175 Single Acting Hydraulic Outlet toMANUALLY raise compressor sheet.4) See harvesting units for Harvester requirements.*In-Base Equipment on 7980 Harvester.

654.00

8603 High Flow Rear Hydraulic OutletFor Harvesters NOT equipped with Advanced Header Height Control, Code 2415.1) Maximum Flow- 22 GPM for harvesters equipped with 3 Speed Manual-Shift Transmission, Code 2052.- 20 GPM for harvesters equipped with ProDrive Transmission, Code 2063.

2) Recommended for dumping wagons.3) NOT compatible with Advanced Header Height Control, Code 2415, INSTEAD order fieldinstalled BZ100203 High Flow Rear Hydraulic Outlet for Harvesters equipped with Code2415.4) NOT compatible with field installed BZ100203 High Flow Rear Hydraulic Outlet.5) Requires aftermarket hydraulic tank bundle ordered separately from RCI Engineering LLC;reference RC042078. See Allied Supplier Information in Attachments - Ordered as Desiredsection for more information.

4,115.00

8600 Single Acting Hydraulic OutletRequired to enable hay pickup harvesting unit feature that AUTOMATICALLY raisescompressor sheet when cutterhead feedrolls stop.

886.00

8602 Standard Flow Rear Hydraulic OutletMaximum Flow- 9 GPM for harvesters equipped with 3 Speed Manual-Shift Transmission, Code 2052.- 7 GPM for harvesters equipped with ProDrive Transmission, Code 2063.

NOT compatible with field installed BZ100203 High Flow Rear Hydraulic Outlet.

1,166.00

Kernel Processor:8380 Electric Drive Upgrade for Kernel Processor Chain Hoist

1) Requires Code 3731, 3732, 3741, or 3742 Kernel Processor.2) Strongly recommended to quickly raise or lower KP when changing between grass oralfalfa and corn crops.

1,078.00

8338 Kernel Processor Ready1) For machines that are ordered without Kernel Processor.2) Not compatible with machines ordered with Kernel Processor from factory.3) Can only be ordered with DOCOL chute Code 3710. Not compatible with Code 8380.

1,550.00

Lighting:8135 Halogen Working Lights - (2) Additional

1) Mount to operator platform handrails.2) Provides additional outside row lighting for wide harvesting unit applications.

271.00

8137 Halogen Working Lights - (2) Double Beam1) Mount in front of operation platform.2) Replaces base equipment Single Beam Halogen Lights.3) Provides upgraded night visibility.

271.00





SUGGESTEDLIST PRICE

USD ($)

SPECIAL EQUIPMENT - FACTORY INSTALLED ...Continued...8136 Work Light for Discharge Spout - (1) Additional

1) Not orderable without a spout Code 5590.249.00

Operator Environment:8138 Field Office

Located under training seat.409.00

8114 Inoculant Tank Control and Electrical Harness1) Recommended if aftermarket inoculant or water tank is installed.2) Equips base machine with armrest control and wiring harness to tank.

141.00

8119 Windshield Wiper and Washer for LH and RH Windows 605.00

8125 12 Volt Power Outlet Armrest ControlledOnly used for cutting platforms with electrical actuated reel speed adjustments.

25.00

Tires and Wheels:8690 Duals Ready

1) Machine ships without front tires, rear tires included but must be ordered below.2) Duals Bundle for 480 (BXE10164) or 520 (BXE10165) front tires and mounting hardware(BXE10227) must be ordered separately via the attachment distribution center.3) BXE10165 (520 front tire bundle) is only compatible with 7780 or 7980 SPFH.4) Requires Code 6605, 6607, or 6608.

5,962.00

7712 Loading Hooks for Duals Ready Machine1) Required with Code 8690 Duals Ready.2) Required for machines shipped without front tires.

No Charge


Ag Management Solutions:For Attachments, see AMS Price Pages.

Chute:9370 Wear Resistant All Crop Curved Chute

1) Required to provide crop path from cutterhead to blower with kernel processor removed.1,338.00

Cutterhead Knife and Shearbar Type:9419 Heavy Duty Stationary Knife for Grass

Only orderable with Codes 4012 or 4014.725.00

9420 Heavy Duty Stationary Knife for CornOnly orderable with Codes 4012 or 4014.

725.00

Discharge Spout:9550 Extension, High Arch Spout

1) For High Arch Spout ONLY (Code 5597 or field installed).2) Recommended when side loading into open top wagon or truck in applications with 8-rowharvesting units.3) Second Working Light for Discharge Spout (Code 8136 or BZ13730) recommended.

717.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS - ORDER AS DESIRED ...Continued...9551 Extension (Long), High Arch Spout

1) For SN509964 (Model Year 2009) harvesters with High Arch Spout ONLY (Code 5597 orBZ100202). Installation on older harvesters will likely result in spout structural failure unlessALSO upgraded with BZ100202 High Arch Spout.2) Recommended when side loading into open top wagon or truck in applications with 10-rowharvesting units.3) BZ13730, Second Working Light for Discharge Spout recommended, ordered separately.4) For High Arch Spout ONLY (Code 5597 or BZ100202).5) Recommended when side loading into open top wagon or truck in applications with 10-rowharvesting units.

1,391.00

Gold Key Customer Event:9075 Gold Key Tour

Not compatible with Code 9076. This personal guided tour strives to provide you with theunique opportunity to watch your machine during its final stages of manufacturing. This touris limited by factory daily production allowance levels and may have an increased lead-time.A target tour date will be communicated in advance, but a date will not be firmed up untilapproximately 6 business days in advance for this tour and this date is subject to change up tothe tour date.

No Charge

9076 Gold Key Customer Experience TourNot compatible with Code 9075. This personal guided tour provide you with the uniqueopportunity to watch a similar machine to the one you are purchasing during its final stages ofmanufacturing. This tour will be scheduled in advance and can occur at your convenienceduring a 60 day window (30 days prior to or 30 days after your machine's expected warehousedate).

No Charge

Operator Environment:9013 French Operator Manual and Decal Kit No Charge

9037 Spanish Operator Manual and Decal Kit No Charge

9049 Self-Propelled Forage Harvester Parts Catalog No Charge

ALLIED SUPPLIER INFORMATIONFOR DISCHARGE SPOUT LOWERING OR HIGH FLOW HYDRAULIC TANK BUNDLESCONTACT:

RCI Engineering LLC970 Metalcraft DriveMayville, WI 53050Telephone: (toll free) (888) 472-4552Telephone: (920) 387-9804Fax: (920) 387-9806Email: [email protected]: www.RCIengineering.com

Refer to the Agricultural Sales Manual For Additional Information


Auto Lube System:BZ13798 Auto Lube System - Kernel Processor 1,172.60





SUGGESTEDLIST PRICE

USD ($)


Blower:BXE10115 Blower Bundle Update for Standard Body Machines

1) Base Equipment on 2012 7050 Series Standard Body machines and newer.2,040.50

Z13078 Blower Sheave, 2000 RPM at 1000 RPM Cutterhead Speed1) Will assist in gummy alfalfa conditions.2) Not recommended for corn.3) If kernel processor is installed, an additional sheave and belt will be necessary to slow downthe RPM on these units.

See Parts

Z13077 Blower Sheave, 2000 RPM at 1150 RPM Cutterhead Speed1) Requires 1150 RPM Cutterhead Conversion (BZ13111).2) Will assist in gummy alfalfa conditions.3) Not recommended for corn.4) If kernel processor is installed, an additional sheave and belt will be necessary to slow downthe RPM on these units.

See Parts

Chute:Z78611 Stainless Steel Liner for Standard All Crop Curved Chute

1) Increases crop flow efficiency in gummy alfalfa conditions.2) Not intended to provide increased wear life of crop chute.

See Parts

BZ13746 Standard All Crop Curved Chute1) Provides crop path from cutterhead to blower with kernel processor removed.2) Not required for machines EQUIPPED with factory installed Code 2720 Wear ResistantChute.

722.70

Z81884 Wear Resistant Liner for Standard All Crop Curved Chute See Parts

Combine Heads:StalkMaster chopping corn heads are NOT currently compatible.

BZ12909 Drive Adapting Parts for 546, 594, 643 and 693 Corn HeadsRequired for model year 1999 and older corn heads with hex drive.

2,384.00

BZ13724 Drive Adapting Parts for 600 Series Combine Header EquipmentRequired to attach 600C Series Corn Heads.NOT required for 600D Series Draper Platforms when RCI Engineering draper conversionbundle is used.Includes driveshaft, hydraulic multi-coupler and related plumbing, and mounting brackets.

2,241.80

BZ12910 Drive Adapting Parts for 644 and 694 Corn HeadsRequired for model year 1999 and older corn heads with hex drive.

1,126.00


2,966.00

BZ12908 Drive Adapting Parts for Older 444 and 494 Corn HeadsRequired for model year 1999 and older corn heads with hex drive.

1,255.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BZ100216 Ear Corn Cross Drive

1) Required to drive RH side of ALL combine corn heads.2) Requires the following to complete installation of model year 2000 and newer combine cornhead:

- AZ59204 LH Driveshaft- AZ56631 Wiring Harness

3) Requires the following to complete installation of model year 1999 and older combine cornhead:

- BZ12908, BZ12909, BZ12910 or BZ12911 as appropriate for combine head model- AZ46671 RH Slip Clutch- AZ56630 Wiring Harness

4) See ear corn cross drive in Agricultural Sales Manual for more information.

9,725.10

AZ46671 Slip ClutchRequired to drive RH side of model year 1999 and older combine corn heads.

See Parts

AZ59204 Telescoping Driveshaft for Combine Corn HeadsRequired to drive LH side of model year 2000 and newer combine corn heads.

See Parts

AZ56630 Wiring HarnessRequired to complete installation of model year 1999 and older combine corn heads.

See Parts

AZ56631 Wiring HarnessRequired to complete installation of model year 2000 and newer combine corn heads.

See Parts

Cutterhead:BXE10043 Anti-Accumulation Kit

Reduces crop buildup around feedrolls.311.30

BZ13629 Recirculation Screen Installation Parts 863.50

Discharge Spout:BZ100182 Automatic Spout Positioning

Allows operator to pre-set up to 8 Spout positions, including height, rotation, and cap position.Also features return to transport position.

1,263.90

BZ100239 Extension (Long), High Arch Spout1) For SN509964 (Model Year 2009) harvesters with High Arch Spout ONLY (Code 5597 orBZ100202). Installation on older harvesters will likely result in spout structural failure unlessALSO upgraded with BZ100202 High Arch Spout.2) Recommended when side loading into open top wagon or truck in applications with 10-rowharvesting units.3) BZ13730, Second Working Light for Discharge Spout recommended, ordered separately.4) For High Arch Spout ONLY (Code 5597 or BZ100202).5) Recommended when side loading into open top wagon or truck in applications with 10-rowharvesting units.

1,530.10

AZ101239 Extension, Flat Spout1) Converts BZ100013 Short Spout to long spout; recommended for loading towed wagons.2) Order rod for spout cap control separately through Parts.3) Engine exhaust extension recommended when loading towed wagons.

See Parts

BZ100238 Extension, High Arch Spout1) For High Arch Spout ONLY (Code 5597 or field installed).2) Recommended when side loading into open top wagon or truck in applications with 8-rowharvesting units.3) Second Working Light for Discharge Spout (Code 8136 or BZ13730) recommended.

788.70





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BZ100177 Spout Rotation, Two-Speed

Provides faster rotation speed when moving discharge spout side to side while harvesting.944.90

BZ100202 Spout, High ArchRecommended when side loading into open top wagons or trucks.

5,875.10

BZ100014 Spout, Long Flat1) Recommended when loading into towed wagons.2) Engine exhaust extension recommended when loading towed wagons.

5,176.00

BZ100013 Spout, Short FlatRecommended when side loading into covered wagons or trucks.

4,487.00

Final Drive:Z13329 Final Drive Spacer, Heavy-Duty Final Drive - 62 mm (2.4 In.)

1) Required for 120 In. tread spacing with 650/75R32 or 800/65R32 drive tires.2) Harvesters BELOW SN510523, MY2010, require upgrade to heavy-duty final drives.3) Requires the following ordered separately through Parts:- (2) AZ101235 Heavy-Duty Final Drives- (2) Z62208 Drive Shafts- (1) Z67068 Axle Truss Rod

See Parts

AZ101235 Final Drive, Heavy-Duty Final Drive AssemblyFor Harvesters BELOW SN510523, MY2010. Included in base equipment for later Harvesters.1) Required for 120 In. tread spacing with 650/75R32 or 800/65R32 drive tires.2) Requires the following ordered separately through Parts:- (2) Z13329 Final Drive Spacers- (2) Z62208 Drive Shafts- (1) Z67068 Axle Truss Rod

See Parts

Z79041 Wheel Spacer, Heavy-Duty Final Drive - 28 mm (1.1 In.) See Parts

Z79040 Wheel Spacer, Standard Final Drive - 28 mm (1.1 In.)For Harvesters BELOW SN510523, MY2010. Heavy-duty final drives in base equipment forlater Harvesters.

See Parts

Frame and Chassis:BZ100189 Debris Curtain, Retractable

1) For 7000 Series Harvesters; included in base equipment for 7050 Series Harvesters.2) Reduces accumulation of crop material under operator station.

704.00

Hydraulics:BZ100176 Double Acting Hydraulic Outlet

1) Required to fold 676, 686, 678, 778, 688, 698, 690, 710, 770, OR 692 harvesting units oroptional hydraulically folded gauge wheels on 630C, 640C, or 645C hay pickups.2) Code 8600 or BZ100175 Single Acting Hydraulic Outlet STILL required to enable haypickup harvesting unit feature that AUTOMATICALLY raises compressor sheet whencutterhead feedrolls stop.3) Can be used in lieu of code 8600 or BZ100175 Single Acting Hydraulic Outlet toMANUALLY raise compressor sheet.4) See harvesting units for Harvester requirements.*In-Base Equipment on 7980 Harvester.

774.40





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BZ13754 High Flow Rear Hydraulic Outlet

For Harvesters NOT equipped with Advanced Header Height Control, Code 2415.1) Maximum Flow- 22 GPM for harvesters equipped with 3 Speed Manual-Shift Transmission, Code 2052.- 20 GPM for harvesters equipped with ProDrive Transmission, Code 2063.2) Recommended for dumping wagons.3) NOT compatible with Advanced Header Height Control, Code 2415, INSTEAD order fieldinstalled BZ100203 High Flow Rear Hydraulic Outlet for Harvesters equipped with Code2415.4) NOT compatible with field installed BZ100203 High Flow Rear Hydraulic Outlet.5) Requires aftermarket hydraulic tank bundle ordered separately from RCI Engineering LLC;reference RC042078. See Allied Supplier Information in Attachments - Ordered as Desiredsection for more information.

4,978.60

BZ100203 High Flow Rear Hydraulic OutletFor Harvesters equipped with Advanced Header Height Control, Code 2415.1) Maximum flow- 22 GPM for harvesters equipped with 3 Speed Manual-Shift Transmission, Code 2052.- 20 GPM for harvesters equipped with ProDrive Transmission, Code 2063.2) Recommended for dumping wagons.3) NOT compatible with factory installed:

- High Flow Rear Hydraulic Outlet, Code 8603.- Standard Flow Rear Hydraulic Outlet, Code 8602.- LESS Advance Header Height Control, Code 2400.

4) Requires aftermarket hydraulic tank bundle ordered separately from RCI Engineering LLC;reference RC042078. See Allied Supplier Information in Attachments - Ordered as Desiredsection for more information.

4,526.00

BZ100175 Single Acting Hydraulic OutletRequired to enable hay pickup harvesting unit feature that AUTOMATICALLY raisescompressor sheet when cutterhead feedrolls stop.

1,050.50

BZ100174 Standard Flow Rear Hydraulic OutletMaximum Flow- 9 GPM for harvesters equipped with 3 Speed Manual-Shift Transmission, Code 2052.- 7 GPM for harvesters equipped with ProDrive Transmission, Code 2063.NOT compatible with field installed BZ100203 High Flow Rear Hydraulic Outlet.

1,411.30

Kernel Processor:BXE10040 Chain Hoist, Electrically Driven - Kernel Processor

Required to complete field installation of kernel processor.1,987.70

BZ13785 Drive Parts - Machines with 1800 RPM Blower Speed1) For machines with base equipment 1800 RPM blower speed.2) Required to complete field installation of BZ100160 Kernel Processor.3) See notes under BZ100160 Kernel Processor for other kits required to complete kernelprocessor field installation.

418.00

BXE10042 Electrically Adjustable Roll Clearance Upgrade Kit for Kernel Processor1) Requires factory or field installed kernel processor.2) Enables on-the-go roll clearance adjustments from the cab.

2,063.60

BZ100118 Hydraulic Parts, Kernel Processor1) Valve for hydraulic belt tensioner.2) Required to complete field installation of kernel processor on:

- ALL machines equipped with ProDrive Transmission, Code 2040.- Later production machines, after Feb 08 actual production, with 3-Speed Manual-Shift

Transmission, Code 2003.

217.80





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BZ100160 Kernel Processor (Quick Change), Standard Sawtooth Rolls with Manually Adjustable Roll

Clearance1) Requires the following to complete kernel processor field installation on harvesters notpreviously equipped with a kernel processor:- BZ13526 Kernel Processor Common Drive Parts.- BZ100162 Kernel Processor Rails.- BZ13785 Kernel Processor Drive Parts for harvesters with 1800 RPM blower speed.- BZ100818 Kernel Processor Hydraulic Parts for ALL harvesters equipped with ProDriveTransmissions or late production harvesters ONLY, manufactured AFTER Feb 08, with3-Speed Manual-Shift Transmissions; BZ13555 INSTEAD for early production, manufacturedFeb 08 or before.- BZ13668 Electrically Driven Kernel Processor Chain Hoist.2) Requires AZ57329 or AZ63827 KP Standard or Stainless Steel Adapting Cover to harvestgrass or alfalfa crops with KP in RAISED position. See Parts.3) Not for use in grass or alfalfa crops.4) Drive belts NOT included. See Parts if required.

20,750.40

BZ100162 Kernel Processor Rails1) Requires BZ100160 Kernel Processor.2) Requires BZ13785 Kernel Processor Drive Parts for Machines with 1800 RPM BlowerSpeed.See notes with BZ100160 Kernel Processor for additional information.

1,043.90

BXE10088 Quad-Band Kernel Processor Belt Kit for Standard BodyFor use with standard body machines with blower speed @ 1800 rpm.

1,546.60


1,546.60

AZ101376 Roll, (107T) Chromed Wear Resistant Sawtooth See Parts

AZ101800 Roll, (107T) Sawtooth See Parts

AZ102633 Roll, Whole Plant See Parts

AZ63827 Top Chute-KP Quick Raise, Stainless SteelRequired to harvest grass or alfalfa crops with kernel processor in RAISED position.

See Parts

AZ57329 Top Chute-KP Quick Raise, Standard1) Required to harvest grass or alfalfa crops with kernel processor in RAISED position.2) Included with BZ13746, Standard All Crop Curved Chute.

See Parts

Lighting:BZ13730 Work Light for Discharge Spout - (1) Additional 300.30

Operator Environment:BZ13547 Inoculant Tank Control and Electrical Harness

1) Recommended if aftermarket inoculant or water tank is installed.2) Equips base machine with armrest control and wiring harness to tank.

171.60

RE190139 John Deere/Delco AM/FM Weatherband RadioRequires AH211698, Radio Adapter Harness, to complete field installation.

See Parts

AH211698 Radio Adapter HarnessRequired to complete radio field installations.

See Parts





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...SWVOSMK2 SPFH Camera System

1) Required bundles: Spout Bracket (SWZ101225) and Two Camera Capable Wiring Harness(SWVOSBHC2) be purchased separately to mount camera kit on Self-Propelled ForageHarvesters.2) Obtain installation instructions from DTAC solution: 67346.3) Embedded video system includes an in-cab color LCD display, one camera for spoutdischarge control, and a second camera for rear drive and hitch control.

See Parts

SWZ101225 SPFH Spout Bracket for Mounting CameraRequired to mount SPFH Camera System on SPFH.

See Parts

Tires and Wheels:BXE10164 480/80R42 154A8 R1 Radial Front Tires for Duals Ready SPFH

1) Includes 4 tires and wheels.2) Requires bundle BXE10227 for mounting hardware.3) Compatible with all self propelled forage harvester models 7180-7980.

5,040.20

BXE10165 520/85R38 155A8 R1 Radial Front Tires for Duals Ready SPFH 5,218.40

BXE10227 Mounting Hardware for 480/80R42 and 520/85R38 Dual Tires1) Required for bundles BXE10164 or BXE10165.

683.10




OPERATOR STATION:Air Conditioned and Heated Cab with:Deluxe SeatTraining Seat with Cool BoxArm RestsOperator Presence Safety SwitchSafety Belts for Driverand Training Seat








ENGINE:John Deere 6 Cylinder 13.5L DieselPower Tech EngineiT4 Emissions Compliant440 Hp (ECE R120 @ 1900 RPM)Variable Fan DriveSelf-Cleaning Rotary Air Screenwith Rotary Brushes






Software Logic (Optional HarvestLabMoisture Sensor Required to Enable

AutoLOC Functionality)Spiral Type Cutterhead BandWear Resistant All-Crop Chute



One 150 Amp AlternatorUniversal Power Outlet StripTwo Wet-Charged Batteries 12V - 174 AHBattery Disconnect Switch








SUGGESTEDLIST PRICE

USD ($)








SUGGESTEDLIST PRICE

USD ($)











1,524.00


1,795.00




4,538.00


4,240.00





SUGGESTEDLIST PRICE

USD ($)



8,778.00



In Base Price


1,200.00



2063 ProDrive Transmission - 25 mph (40 km/h)Not compatible with Code 2230.

12,616.00



In Base Price

2230 Powered, Non-Adjustable Rear Axle1) NOT compatible with ProDrive Transmission Code 2063.2) Fixed 2802 mm (110 In.) length without tires.

23,357.00





SUGGESTEDLIST PRICE

USD ($)

REAR AXLE ...Continued...3) See Tires Spacing Chart in the Agricultural Sales Manual for tread spacings available withspecific tires.4) Rim offset used to adjust rear tread spacing.5) Rear axle capacity is 8.5 ton.

2235 Powered, ProDrive Non-Adjustable Rear Axle1) Requires ProDrive Transmission Code 2063.2) Fixed 2802 mm (110 In.) length without tires.3) See Tires Spacing Chart in the Agricultural Sales Manual for tread spacings available withspecific tires.4) Rim offset used to adjust rear tread spacing.5) Rear axle capacity is 8.5 ton.

24,365.00



3,593.00



8,234.00


9,300.00



5,884.00





SUGGESTEDLIST PRICE

USD ($)




3330 Upper Front Feedroll with Straight Replaceable Smooth Bars1) Recommended for tall grass crops like barley and wheat.2) Not recommended for corn.

602.00




In Base Price



19,264.00


21,564.00





SUGGESTEDLIST PRICE

USD ($)



19,927.00


22,226.00






1,165.00





418.00





SUGGESTEDLIST PRICE

USD ($)



-4,079.00

5591 Short Flat Discharge Spout1) Recommended when side loading into covered wagons or trucks.2) Code 8115 Two-Speed Spout Rotation available for faster rotation speed.3) Code 8115 in base equipment on 7980.4) Not orderable with rear mounted mirror Code 8134.

In Base Price


624.00


770.00





-3,078.00



-2,250.00





SUGGESTEDLIST PRICE

USD ($)


480/80R26 In. 160A8 R4 (Rear)NOT compatible with:690, 692, 710 or 770 harvesting unit applications regardless of transmission type.



-2,250.00

6661 800/65R32 In. 172A8 R1W (Front)480/80R26 In. 160A8 R4 (Rear)Goodyear Front and RearMinimum Overall Width:Front: 3400 mm (11 Ft. 2 In.)


-700.00



In Base Price



-700.00

6683 800/65R32 In. 172A8 R1W (Front)540/65R30 In. 142A8 R1W (Rear)Not compatible with 25 mph (40 km/h) ProDrive Transmission (Code 2063).Continental Front and RearMinimum Overall Width:Front: 3500 mm (11 Ft. 4 In.)


Same Price



Same Price





SUGGESTEDLIST PRICE

USD ($)


600/65R28 In. 149A8 R1W (Rear)Continental Front and RearMinimum Overall Width:Front: 3500 mm (11 Ft. 4 In.)


1,514.00

6742 800/65R32 In. 178A8 R1W Radial (Front)480/80R26 In. 160A8 R4 Radial (Rear)REQUIRED with 25 mph (40 km/h) ProDrive Transmission (Code 2063) in 678 or 688harvesting unit applications.Trelleborg Front and Michelin RearMinimum Overall Width:Front: 3400 mm (11 Ft. 2 In.)


-716.00

6744 800/65R32 In. 178A8 R1W Radial (Front)600/65R28 In. 156A8 R1W Radial (Rear)Trelleborg Front and Continental RearMinimum overall width:Front: 3400 mm (11 Ft. 2 In.)


1,054.00


-16.00


540/65R30 In. 156A8 R1W (Rear)NOT compatible with 25 mph (40 km/h) ProDrive Transmission (Code 2063).Goodyear Front and Continental RearMinimum Overall Width:Front: 3700 mm (12 Ft. 2 In.)



-1,550.00





SUGGESTEDLIST PRICE

USD ($)





-480.00

6667 800/65R32 In. 172A8 R1W (Front)540/65R30 In. 156A8 R1W (Rear)NOT compatible with 25 mph (40 km/h) ProDrive Transmission (Code 2063).Goodyear Front and Continental RearMinimum Overall Width:Front: 3850 mm (12 Ft. 8 In.)



Same Price




1,070.00




2,816.00


-16.00


1,054.00





SUGGESTEDLIST PRICE

USD ($)


480/80R26 In. 160A8 R4 (Rear)Trelleborg Front and Michelin RearMinimum Overall width:Front: 3850 mm (12 Ft. 8 In.)



-716.00




-9,188.00


-7,658.00

BALLASTING7315 22 Quick-Attach Weights 40 Kg (88 Lb.) and 14 Rear Chassis Plates 6,635.00



7345 14 Rear Chassis Plates Plus 6 Outer Quick-Attach Weights 40 Kg (88 Lb.) 4,761.00

7355 22 Inner quick-Attach Weights 40 Kg (88 Lb.) 2,837.00



8322 Cutterhead Feedroll Spring UpgradeIncludes second set of feedroll springs.

118.00


283.00



764.00


781.00





SUGGESTEDLIST PRICE

USD ($)




8703 Engine Speed Management System1) Reduces fuel consumption in headland turns and at vehicle sitting position.2) Engine speed automatically controlled depending on engine load.3) Requires ProDrive Transmission Code 2063.

512.00



140.00

8005 Reinforcement for Harvester Frame in Large Harvesting Unit ApplicationRequired for Harvesters equipped with 678, 698, 690, or 770 Harvesting Units.

1,446.00



654.00



4,115.00


886.00



1,166.00





SUGGESTEDLIST PRICE

USD ($)




1,078.00


1,550.00



271.00


271.00

8136 Work Light for Discharge Spout - (1) Additional1) Not orderable without a spout Code 5590.

249.00




141.00



25.00



5,962.00


No Charge






SUGGESTEDLIST PRICE

USD ($)








725.00



717.00

9551 Extension (Long), High Arch Spout1) For SN509964 (Model Year 2009) harvesters with High Arch Spout ONLY (Code 5597 orBZ100202). Installation on older harvesters will likely result in spout structural failure unlessALSO upgraded with BZ100202 High Arch Spout.2) Recommended when side loading into open top wagon or truck in applications with 10-rowharvesting units.3) BZ13730, Second Working Light for Discharge Spout recommended, ordered separately.4) For High Arch Spout ONLY (Code 5597 or BZ100202).5) Recommended when side loading into open top wagon or truck in applications with 10-rowharvesting units.

1,391.00



No Charge


No Charge







SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS - ORDER AS DESIRED ...Continued...9049 Self-Propelled Forage Harvester Parts Catalog No Charge









See Parts


See Parts



See Parts


722.70






SUGGESTEDLIST PRICE

USD ($)




2,384.00


2,241.80


1,126.00


2,966.00


1,255.00

BZ100216 Ear Corn Cross Drive1) Required to drive RH side of ALL combine corn heads.2) Requires the following to complete installation of model year 2000 and newer combine cornhead:





9,725.10


See Parts


See Parts


See Parts


See Parts






1,263.90





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BZ100239 Extension (Long), High Arch Spout


1,530.10


See Parts


788.70

BZ100177 Spout Rotation, Two-SpeedProvides faster rotation speed when moving discharge spout side to side while harvesting.

944.90


5,875.10


5,176.00


4,487.00



See Parts


See Parts



See Parts





SUGGESTEDLIST PRICE

USD ($)




704.00



774.40

BZ13754 High Flow Rear Hydraulic OutletFor Harvesters NOT equipped with Advanced Header Height Control, Code 2415.1) Maximum Flow- 22 GPM for harvesters equipped with 3 Speed Manual-Shift Transmission, Code 2052.- 20 GPM for harvesters equipped with ProDrive Transmission, Code 2063.2) Recommended for dumping wagons.3) NOT compatible with Advanced Header Height Control, Code 2415, INSTEAD order fieldinstalled BZ100203 High Flow Rear Hydraulic Outlet for Harvesters equipped with Code2415.4) NOT compatible with field installed BZ100203 High Flow Rear Hydraulic Outlet.5) Requires aftermarket hydraulic tank bundle ordered separately from RCI Engineering LLC;reference RC042078. See Allied Supplier Information in Attachments - Ordered as Desiredsection for more information.

4,978.60




4,526.00


1,050.50


1,411.30







SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BZ13785 Drive Parts - Machines with 1800 RPM Blower Speed

1) For machines with base equipment 1800 RPM blower speed.2) Required to complete field installation of BZ100160 Kernel Processor.3) See notes under BZ100160 Kernel Processor for other kits required to complete kernelprocessor field installation.

418.00


2,063.60




217.80

BZ100160 Kernel Processor (Quick Change), Standard Sawtooth Rolls with Manually Adjustable RollClearance1) Requires the following to complete kernel processor field installation on harvesters notpreviously equipped with a kernel processor:- BZ13526 Kernel Processor Common Drive Parts.- BZ100162 Kernel Processor Rails.- BZ13785 Kernel Processor Drive Parts for harvesters with 1800 RPM blower speed.- BZ100818 Kernel Processor Hydraulic Parts for ALL harvesters equipped with ProDriveTransmissions or late production harvesters ONLY, manufactured AFTER Feb 08, with3-Speed Manual-Shift Transmissions; BZ13555 INSTEAD for early production, manufacturedFeb 08 or before.- BZ13668 Electrically Driven Kernel Processor Chain Hoist.2) Requires AZ57329 or AZ63827 KP Standard or Stainless Steel Adapting Cover to harvestgrass or alfalfa crops with KP in RAISED position. See Parts.3) Not for use in grass or alfalfa crops.4) Drive belts NOT included. See Parts if required.

20,750.40


1,043.90


1,546.60


1,546.60





See Parts


See Parts





SUGGESTEDLIST PRICE

USD ($)





171.60


See Parts


See Parts

SWVOSMK2 SPFH Camera System1) Required bundles: Spout Bracket (SWZ101225) and Two Camera Capable Wiring Harness(SWVOSBHC2) be purchased separately to mount camera kit on Self-Propelled ForageHarvesters.2) Obtain installation instructions from DTAC solution: 67346.3) Embedded video system includes an in-cab color LCD display, one camera for spoutdischarge control, and a second camera for rear drive and hitch control.

See Parts


See Parts



5,040.20



683.10




OPERATOR STATION:Air Conditioned and Heated Cab with:Deluxe SeatTraining Seat with Cool BoxArm RestsOperator Presence Safety SwitchSafety Belts for Driverand Training Seat








ENGINE:John Deere 6 Cylinder 13.5L DieselPower Tech EngineiT4 Emissions Compliant485 Hp (ECE R120 @ 1900 RPM)Variable Fan DriveSelf-Cleaning Rotary Air Screenwith Rotary Brushes






Software Logic (Optional HarvestLabMoisture Sensor Required to EnableAutoLOC Functionality)

Spiral Type Cutterhead BandWear Resistant All-Crop Chute



One 150 Amp AlternatorUniversal Power Outlet StripTwo Wet-Charged Batteries 12V - 174 AHBattery Disconnect Switch








SUGGESTEDLIST PRICE

USD ($)








SUGGESTEDLIST PRICE

USD ($)











1,524.00


1,795.00




4,538.00


4,240.00





SUGGESTEDLIST PRICE

USD ($)



8,778.00



In Base Price


1,200.00




12,616.00



In Base Price


23,357.00





SUGGESTEDLIST PRICE

USD ($)



24,365.00



3,593.00



8,234.00


9,300.00



5,884.00





SUGGESTEDLIST PRICE

USD ($)





602.00




In Base Price



19,264.00


21,564.00





SUGGESTEDLIST PRICE

USD ($)



19,927.00


22,226.00






1,165.00





418.00





SUGGESTEDLIST PRICE

USD ($)



-4,079.00


In Base Price


624.00


770.00





-3,078.00



-2,250.00





SUGGESTEDLIST PRICE

USD ($)





-2,250.00



-700.00



In Base Price



-700.00



Same Price



Same Price





SUGGESTEDLIST PRICE

USD ($)


600/65R28 In. 149A8 R1W (Rear)Continental Front and RearMinimum Overall Width:Front: 3500 mm (11 Ft. 4 In.)


1,514.00



-716.00



1,054.00


-16.00





-1,550.00





SUGGESTEDLIST PRICE

USD ($)





-480.00




Same Price




1,070.00




2,816.00


-16.00


1,054.00





SUGGESTEDLIST PRICE

USD ($)


480/80R26 In. 160A8 R4 (Rear)Trelleborg Front and Michelin RearMinimum Overall width:Front: 3850 mm (12 Ft. 8 In.)



-716.00




-9,188.00


-7,658.00

BALLASTING7300 Without Ballasting










283.00



764.00


781.00





SUGGESTEDLIST PRICE

USD ($)





512.00



140.00


1,446.00



654.00



4,115.00


886.00



1,166.00





SUGGESTEDLIST PRICE

USD ($)




1,078.00


1,550.00



271.00


271.00


249.00




141.00



25.00



5,962.00


No Charge






SUGGESTEDLIST PRICE

USD ($)








725.00



717.00


1,391.00



No Charge


No Charge







SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS - ORDER AS DESIRED ...Continued...9049 Self-Propelled Forage Harvester Parts Catalog No Charge









See Parts


See Parts



See Parts


722.70






SUGGESTEDLIST PRICE

USD ($)




2,384.00


2,241.80


1,126.00


2,966.00


1,255.00






9,725.10


See Parts


See Parts


See Parts


See Parts






1,263.90





SUGGESTEDLIST PRICE

USD ($)



1,530.10


See Parts


788.70


944.90


5,875.10


5,176.00


4,487.00



See Parts


See Parts



See Parts





SUGGESTEDLIST PRICE

USD ($)




704.00



774.40


4,978.60




4,526.00


1,050.50


1,411.30







SUGGESTEDLIST PRICE

USD ($)


1) For machines with base equipment 1800 RPM blower speed.2) Required to complete field installation of BZ100160 Kernel Processor.3) See notes under BZ100160 Kernel Processor for other kits required to complete kernelprocessor field installation.

418.00


2,063.60




217.80


20,750.40


1,043.90


1,546.60


1,546.60





See Parts


See Parts





SUGGESTEDLIST PRICE

USD ($)





171.60


See Parts


See Parts


See Parts


See Parts



5,040.20



683.10




OPERATOR STATION:Air Conditioned and Heated Cab with:Deluxe SeatTraining Seat with Cool BoxArm RestsOperator Presence Safety SwitchSafety Belts for Driver andTraining Seat

Radio Installation Kit (Includes twospeakers and antenna)

Front Windshield Wiper and WasherAdjustable Steering ColumnTelescoping Steering WheelHydrostatic Power SteeringAutomatic Header Position ControlHydraulic Flotation for Hay Pick-UpHarvesting Units

Electronic Acre Counter in RightCorner Post





ENGINE:John Deere 6 Cylinder 13.5L DieselPower Tech EngineiT4 Emissions Compliant555Hp (ECE R120 @ 1900 RPM)Direct Drive Engine Fan

Self-Cleaning Rotary Air Screenwith Rotary Brushes


CUTTERHEAD:Dura-Drum, 40 Knife28 In. Wide, 26 In. Diameter1000 RPMAutomatic In-Cab Knife SharpeningStationary Knife with Tungsten Carbide

Vertical EdgeAutomatic In-Cab Stationary Knife

Sharpening AdjustmentElectro-Hydraulic Main ClutchInfinitely Variable Length Of

Cut TransmissionAutoLOC Automatic Length of Cut





One 150 AMP AlternatorUniversal Power Outlet StripTwo Wet-Charged Batteries 12V - 174 AHBattery Disconnect Switch





MISCELLANEOUS:Support Stands for Removal of Cutterhead

and Feedroll Housing291 U.S. (1100 L) Gallon Fuel TankStandard Rear Hitch and Rear Weight CarrierFire Extinguishers; (1) Dry and (1) Liquid


SUGGESTEDLIST PRICE

USD ($)








SUGGESTEDLIST PRICE

USD ($)











1,524.00


1,795.00




4,538.00


4,240.00





SUGGESTEDLIST PRICE

USD ($)



8,778.00



In Base Price


1,200.00




12,616.00



In Base Price


23,357.00





SUGGESTEDLIST PRICE

USD ($)



24,365.00



3,593.00



8,234.00


9,300.00



5,884.00





SUGGESTEDLIST PRICE

USD ($)





602.00




In Base Price



19,264.00


21,564.00





SUGGESTEDLIST PRICE

USD ($)



19,927.00


22,226.00






1,165.00





418.00





SUGGESTEDLIST PRICE

USD ($)



-4,079.00


In Base Price


624.00


770.00





-3,078.00



-2,250.00





SUGGESTEDLIST PRICE

USD ($)





-2,250.00



-700.00



In Base Price



-700.00



Same Price



Same Price





SUGGESTEDLIST PRICE

USD ($)


600/65R28 In. 149A8 R1W (Rear)NOT compatible with:690, 692, 710 or 770 harvesting unit applications regardless of transmission type.

Continental Front and RearMinimum Overall Width:Front: 3500 mm (11 Ft. 4 In.)


1,514.00



-716.00



1,054.00


-16.00





-1,550.00





SUGGESTEDLIST PRICE

USD ($)





-480.00




Same Price




1,070.00

6754 900/55R32 In. 173A8 R1W (Front)600/65R28 In. 149A8 R1W (Rear)NOT compatible with:- 690, 692, 710 or 770 harvesting unit applications regardless of transmission type.

Goodyear Front and Continental RearMinimum Overall Width:Front: 3600 mm (11 Ft. 10 In.)



2,816.00


-16.00





SUGGESTEDLIST PRICE

USD ($)

WHEELS AND TIRES (FRONT AND REAR) ...Continued...6747 800/65R32 In. 178A8 R1W Radial (Front)

600/65R28 In. 156A8 R1W Radial (Rear)Trelleborg Front and Continental RearMinimum Overall width:Front: 3850 mm (12 Ft. 6 In.)Rear: 3500 mm (11 Ft. 4 In.)

1,054.00




-716.00




-9,188.00


-7,658.00











283.00





SUGGESTEDLIST PRICE

USD ($)




764.00


781.00




512.00



140.00


1,446.00



654.00



4,115.00





SUGGESTEDLIST PRICE

USD ($)

SPECIAL EQUIPMENT - FACTORY INSTALLED ...Continued...8600 Single Acting Hydraulic Outlet

Required to enable hay pickup harvesting unit feature that AUTOMATICALLY raisescompressor sheet when cutterhead feedrolls stop.

886.00



1,166.00



1,078.00


1,550.00



271.00


271.00


249.00




141.00



25.00



5,962.00





SUGGESTEDLIST PRICE

USD ($)

SPECIAL EQUIPMENT - FACTORY INSTALLED ...Continued...7712 Loading Hooks for Duals Ready Machine

1) Required with Code 8690 Duals Ready.2) Required for machines shipped without front tires.

No Charge








725.00



717.00


1,391.00



No Charge


No Charge





SUGGESTEDLIST PRICE

USD ($)













See Parts


See Parts



See Parts


722.70





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...Z81884 Wear Resistant Liner for Standard All Crop Curved Chute See Parts



2,384.00


2,241.80


1,126.00


2,966.00


1,255.00






9,725.10


See Parts


See Parts


See Parts


See Parts








SUGGESTEDLIST PRICE

USD ($)




1,263.90


1,530.10


See Parts


788.70


944.90


5,875.10


5,176.00


4,487.00



See Parts


See Parts






SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...Z79040 Wheel Spacer, Standard Final Drive - 28 mm (1.1 In.)

For Harvesters BELOW SN510523, MY2010. Heavy-duty final drives in base equipment forlater Harvesters.

See Parts



704.00

BZ100236 Reinforcement for Harvester Frame in Large Harvesting Unit Application1) Required for Harvesters equipped with 678/778 Harvesting Units UNLESS Harvesteroriginally ordered with code 6074 Reinforcement.2) Rear Weight Bracket (AZ54483), Weight Plates (Z48791), and Weights (R51680), orderedseparately, required for proper ballasting.3) See 678/778 Harvesting Unit for additional Harvester requirements.

2,401.30



774.40


4,978.60




4,526.00


1,050.50





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BZ100174 Standard Flow Rear Hydraulic Outlet

Maximum Flow- 9 GPM for harvesters equipped with 3 Speed Manual-Shift Transmission, Code 2052.- 7 GPM for harvesters equipped with ProDrive Transmission, Code 2063.NOT compatible with field installed BZ100203 High Flow Rear Hydraulic Outlet.

1,411.30




418.00


2,063.60




217.80


20,750.40


1,043.90


1,546.60


1,546.60







SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...AZ102633 Roll, Whole Plant See Parts


See Parts


See Parts




171.60


See Parts


See Parts


See Parts


See Parts



5,040.20



683.10












ENGINE:John Deere 6 Cylinder 13.5L DieselPower Tech EngineiT4 Emissions Compliant625 Hp (ECE R120 @ 1900 RPM)Variable Fan Drive



















SUGGESTEDLIST PRICE

USD ($)








SUGGESTEDLIST PRICE

USD ($)











1,524.00


1,795.00




4,538.00


4,240.00





SUGGESTEDLIST PRICE

USD ($)



8,778.00



In Base Price


1,200.00




12,616.00



In Base Price


23,357.00





SUGGESTEDLIST PRICE

USD ($)



24,365.00



3,593.00



8,234.00


9,300.00



5,884.00





SUGGESTEDLIST PRICE

USD ($)





681.00




In Base Price



19,264.00


21,564.00





SUGGESTEDLIST PRICE

USD ($)



19,927.00


22,226.00






1,165.00





418.00





SUGGESTEDLIST PRICE

USD ($)



-4,079.00


In Base Price


624.00


770.00


WHEELS AND TIRES (FRONT AND REAR)1) Tire load index rating must be appropriate for harvesting units used. See the AgriculturalSales Manual.2) Front drive tires with load index rating of 178A8 or higher required in 710, 770 and 692harvesting unit applications regardless of transmission type.3) 25 mph (40 km/h) ProDrive Transmission (Code 2063) requires:- Rear tires with load index rating of 149A8 or higher.- Front drive tires with load index rating of 178A8 or higher in 678 or 688 harvesting unit

applications.



-3,078.00



-2,250.00





SUGGESTEDLIST PRICE

USD ($)





-2,250.00




-700.00




In Base Price

6672 800/65R32 In. 172A8 R1W (Front)480/80R26 In. 160A8 R4 (Rear)NOT compatible with:690, 692, 710 or 770 harvesting unit application regardless of transmission type.

Michelin Front and RearMinimum Overall Width:Front: 3400 mm (11 Ft. 2 In.)


-700.00

6683 800/65R32 In. 172A8 R1W (Front)540/65R30 In. 142A8 R1W (Rear)Not compatible with:- 690, 692, 710 or 770 harvesting unit applications regardless of transmission type.- 25 mph (40 km/h) ProDrive Transmission (Code 2063).



Same Price





SUGGESTEDLIST PRICE

USD ($)


540/65R30 In. 156A8 R1W (Rear)Not compatible with:- 690, 692, 710 or 770 harvesting unit applications regardless of transmission type.- 25 mph (40 km/h) ProDrive Transmission (Code 2063).

Michelin Front and Continental RearMinimum Overall Width:Front: 3500 mm (11 Ft. 4 In.)


Same Price

6684 800/65R32 In. 178A8 R1W (Front)600/65R28 In. 149A8 R1W (Rear)NOT compatible with:690, 692, 710 or 770 harvesting unit applications regardless of transmission type.



1,514.00

6742 800/65R32 In. 178A8 R1W Radial (Front)480/80R26 In. 160A8 R4 Radial (Rear)REQUIRED:- In 690, 692, 710 or 770 harvesting unit applications regardless of transmission type.- With 25 mph (40 km/h) ProDrive Transmission (Code 2063) in 678 or 688 harvesting unit

applications.Trelleborg Front and Michelin RearMinimum Overall Width:Front: 3400 mm (11 Ft. 2 In.)


-716.00



1,054.00


-16.00





SUGGESTEDLIST PRICE

USD ($)

WHEELS AND TIRES (FRONT AND REAR) ...Continued...


540/65R30 In. 156A8 R1W (Rear)NOT compatible with:- 692, 710 or 770 harvesting unit applications regardless of transmission type.- 25 mph (40 km/h) ProDrive Transmission (Code 2063).




-1,550.00





-480.00

6667 800/65R32 In. 172A8 R1W (Front)540/65R30 In. 156A8 R1W (Rear)NOT compatible with:- 690, 692, 710 or 770 harvesting unit applications regardless of transmission type.- 25 mph (40 km/h) ProDrive Transmission (Code 2063).




Same Price





1,070.00





SUGGESTEDLIST PRICE

USD ($)


600/65R28 In. 149A8 R1W (Rear)NOT compatible with:- 690, 692, 710 or 770 harvesting unit applications regardless of transmission type.




2,816.00


-16.00


1,054.00




-716.00




-9,188.00


-7,658.00










SUGGESTEDLIST PRICE

USD ($)

BALLASTING ...Continued...7345 14 Rear Chassis Plates Plus 6 Outer Quick-Attach Weights 40 Kg (88 Lb.) 4,761.00



Cutterhead:9321 Anti-Accumulation Kit




764.00


781.00




512.00



140.00


1,446.00



654.00





SUGGESTEDLIST PRICE

USD ($)

SPECIAL EQUIPMENT - FACTORY INSTALLED ...Continued...8603 High Flow Rear Hydraulic Outlet

For Harvesters NOT equipped with Advanced Header Height Control, Code 2415.1) Maximum Flow- 22 GPM for harvesters equipped with 3 Speed Manual-Shift Transmission, Code 2052.- 20 GPM for harvesters equipped with ProDrive Transmission, Code 2063.


4,115.00


886.00



1,166.00



1,078.00


1,550.00



271.00


271.00


249.00




141.00






SUGGESTEDLIST PRICE

USD ($)

SPECIAL EQUIPMENT - FACTORY INSTALLED ...Continued...8125 12 Volt Power Outlet Armrest Controlled

Only used for cutting platforms with electrical actuated reel speed adjustments.25.00



5,962.00


No Charge








725.00



717.00


1,391.00





SUGGESTEDLIST PRICE

USD ($)




No Charge


No Charge












See Parts





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...Z13077 Blower Sheave, 2000 RPM at 1150 RPM Cutterhead Speed

1) Requires 1150 RPM Cutterhead Conversion (BZ13111).2) Will assist in gummy alfalfa conditions.3) Not recommended for corn.4) If kernel processor is installed, an additional sheave and belt will be necessary to slow downthe RPM on these units.

See Parts



See Parts


722.70




2,384.00


2,241.80


1,126.00


2,966.00


1,255.00






9,725.10


See Parts


See Parts





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...AZ56630 Wiring Harness

Required to complete installation of model year 1999 and older combine corn heads.See Parts


See Parts






1,263.90


1,530.10


See Parts


788.70


944.90


5,875.10

BXE10220 Spout, High Arch, Aluminum ExtensionRecommended for use with 12-row head.

4,838.90


5,176.00


4,487.00





SUGGESTEDLIST PRICE

USD ($)




See Parts


See Parts



See Parts



704.00

BZ100236 Reinforcement for Harvester Frame in Large Harvesting Unit Application1) Required for Harvesters equipped with 678, 778, 698, 690, 710, 770, or 692 HarvestingUnits UNLESS Harvester originally ordered with code 6074 Reinforcement.2) Rear Weight Bracket (AZ54483), Weight Plates (Z48791), and Weights (R51680), orderedseparately, required for proper ballasting.3) See 678, 710, or 770 Harvesting Unit for additional Harvester requirements.

2,401.30



774.40





SUGGESTEDLIST PRICE

USD ($)


For Harvesters NOT equipped with Advanced Header Height Control, Code 2415.1) Maximum Flow- 22 GPM for harvesters equipped with 3 Speed Manual-Shift Transmission, Code 2052.- 20 GPM for harvesters equipped with ProDrive Transmission, Code 2063.2) Recommended for dumping wagons.3) NOT compatible with Advanced Header Height Control, Code 2415, INSTEAD order fieldinstalled BZ100203 High Flow Rear Hydraulic Outlet for Harvesters equipped with Code2415.4) NOT compatible with field installed BZ100203 High Flow Rear Hydraulic Outlet.5) Requires aftermarket hydraulic tank bundle ordered separately from RCI Engineering LLC;reference RC042078. See Allied Supplier Information in Attachments - Ordered as Desiredsection for more information.

4,978.60




4,526.00


1,050.50


1,411.30




418.00


2,063.60




217.80





SUGGESTEDLIST PRICE

USD ($)


Clearance1) Requires the following to complete kernel processor field installation on harvesters notpreviously equipped with a kernel processor:- BZ13526 Kernel Processor Common Drive Parts.- BZ100162 Kernel Processor Rails.- BZ13785 Kernel Processor Drive Parts for harvesters with 1800 RPM blower speed.- BZ100818 Kernel Processor Hydraulic Parts for ALL harvesters equipped with ProDriveTransmissions or late production harvesters ONLY, manufactured AFTER Feb 08, with3-Speed Manual-Shift Transmissions; BZ13555 INSTEAD for early production, manufacturedFeb 08 or before.- BZ13668 Electrically Driven Kernel Processor Chain Hoist.2) Requires AZ57329 or AZ63827 KP Standard or Stainless Steel Adapting Cover to harvestgrass or alfalfa crops with KP in RAISED position. See Parts.3) Not for use in grass or alfalfa crops.4) Drive belts NOT included. See Parts if required.

20,750.40


1,043.90


1,546.60


1,546.60





See Parts


See Parts




171.60


See Parts


See Parts





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...SWVOSMK2 SPFH Camera System

1) Required bundles: Spout Bracket (SWZ101225) and Two Camera Capable Wiring Harness(SWVOSBHC2) be purchased separately to mount camera kit on Self-Propelled ForageHarvesters.2) Obtain installation instructions from DTAC solution: 67346.3) Embedded video system includes an in-cab color LCD display, one camera for spoutdischarge control, and a second camera for rear drive and hitch control.

See Parts


See Parts



5,040.20



683.10
















ENGINE:John Deere 6 Cylinder 13.5L DieselPower Tech EngineEmissions Compliant625 Hp (ECE R120 @ 1900 RPM)Variable Fan Drive












CHASSIS:Attaching Frame for Harvesting UnitsHeavy Lift Cylinders for Harvesting UnitsRear Weight Carrier







SUGGESTEDLIST PRICE

USD ($)








SUGGESTEDLIST PRICE

USD ($)











1,524.00


1,795.00




4,538.00


4,240.00





SUGGESTEDLIST PRICE

USD ($)



8,778.00



In Base Price


1,200.00




12,616.00



In Base Price


23,357.00





SUGGESTEDLIST PRICE

USD ($)



24,365.00



3,593.00



8,234.00


9,300.00



5,884.00





SUGGESTEDLIST PRICE

USD ($)





681.00




In Base Price


1) Chrome Plated Sawtooth (118 Teeth) KP Rolls.2) Includes drive parts for 1600 RPM blower speed.3) Includes Manually Driven KP Chain Hoist.4) Code 9370 Field Installed Wear Resistant Chute required to operate machine with KPremoved.5) AZ57329 Standard KP Adaptor Cover required to operate machine with KP in raisedposition IF Code 9370 Wear Resistant Chute is NOT ordered. See Parts.6) Code 8380 Electric Drive Upgrade for KP Chain Hoist strongly recommended to quicklyraise or lower KP when changing between grass or alfalfa and corn crops.7) Not for use in grass or alfalfa crops.8) 21% roll speed ratio.

20,775.00


23,073.00








SUGGESTEDLIST PRICE

USD ($)



1,318.00






-4,079.00


In Base Price


624.00


770.00



applications.





SUGGESTEDLIST PRICE

USD ($)



480/80R26 In. 160A8 (Rear)Continental Front and Goodyear Rear.Standard Body Width:Front and Rear: 3150 mm (10 Ft. 4 In.)


-2,250.00




-2,250.00




-700.00




In Base Price




-700.00





SUGGESTEDLIST PRICE

USD ($)





Same Price




Same Price




1,514.00




-716.00



1,054.00


-16.00





SUGGESTEDLIST PRICE

USD ($)







-1,550.00





-480.00





Same Price





1,070.00





SUGGESTEDLIST PRICE

USD ($)






2,816.00


-16.00


1,054.00




-716.00




-9,188.00


-7,658.00










SUGGESTEDLIST PRICE

USD ($)

BALLASTING ...Continued...7345 14 Rear Chassis Plates Plus 6 Outer Quick-Attach Weights 40 Kg (88 Lb.) 4,761.00







764.00


781.00




512.00



140.00



654.00





SUGGESTEDLIST PRICE

USD ($)

SPECIAL EQUIPMENT - FACTORY INSTALLED ...Continued...8603 High Flow Rear Hydraulic Outlet



4,115.00


886.00



1,166.00



1,078.00


1,550.00



271.00


271.00


249.00




141.00






SUGGESTEDLIST PRICE

USD ($)

SPECIAL EQUIPMENT - FACTORY INSTALLED ...Continued...8125 12 Volt Power Outlet Armrest Controlled

Only used for cutting platforms with electrical actuated reel speed adjustments.25.00



5,962.00


No Charge








725.00



717.00


1,391.00





SUGGESTEDLIST PRICE

USD ($)




No Charge


No Charge









Blower:BXE10114 Blower Bundle Update for Wide Body Machines

1) Base Equipment on 2012 7050 Series Wide Body machines and newer.2,390.30



See Parts





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BZ13748 Standard All Crop Curved Chute

1) Provides crop path from cutterhead to blower with kernel processor removed.858.00




2,384.00


2,241.80


1,126.00


2,966.00


1,255.00






9,366.50


See Parts


See Parts


See Parts


See Parts







SUGGESTEDLIST PRICE

USD ($)




1,263.90


1,530.10


See Parts


788.70


944.90


5,875.10


4,838.90


5,176.00


4,487.00


1) Required for 120 In. tread spacing with 800/65R32 drive tires.2) Requires the following ordered separately through Parts:

- (2) AZ101235 Heavy-Duty Final Drives- (1) Z78685 RH Drive Shaft (504 mm)- (1) Z78684 LH Drive Shaft (560 mm)- (1) Z78681 Axle Truss Rod (2070 mm)

See Parts





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...AZ101235 Final Drive, Heavy-Duty Final Drive Assembly

1) Required for 120 In. tread spacing with 800/65R32 drive tires.2) Requires the following ordered separately through Parts:- (2) Z13329 Final Drive Spacers- (2) Z78681 Axle Truss Rod (2070 mm)- (1) Z78685 RH Drive Shaft (504 mm)- (1) Z78684 LH Drive Shaft (560 mm)

See Parts



See Parts



704.00



774.40


4,978.60




4,526.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BZ100175 Single Acting Hydraulic Outlet

Required to enable hay pickup harvesting unit feature that AUTOMATICALLY raisescompressor sheet when cutterhead feedrolls stop.

1,050.50


1,411.30




418.00


2,063.60




217.80

BZ100161 Kernel Processor (Quick Change), Standard Sawtooth Rolls with Manually Adjustable RollClearance1) Requires the following to complete kernel processor field installation on harvesters notpreviously equipped with a kernel processor:- BZ13526 Kernel Processor Common Drive Parts.- BZ100162 Kernel Processor Rails.- BZ13789 Kernel Processor Drive Parts for harvesters with 1600 RPM blower speed.- BZ100818 Kernel Processor Hydraulic Parts for ALL harvesters equipped with ProDriveTransmissions or late production harvesters ONLY, manufactured AFTER Feb 08, with3-Speed Manual-Shift Transmissions; BZ13555 INSTEAD for early production, manufacturedFeb 08 or before.- BZ13668 Electrically Driven Kernel Processor Chain Hoist2) Requires AZ61628 or AZ63979 KP Standard or Stainless Steel Adapting Cover to harvestgrass or alfalfa crops with KP in RAISED position. See Parts.3) Not for use in grass or alfalfa crops.4) Drive belts NOT included. See Parts if required.

22,673.20


1,043.90

BXE10049 Quad-Band Kernel Processor Belt Kit for Wide BodyFor use in wide body machines only.

1,420.10







SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...AZ102632 Roll, (118T) Standard See Parts


See Parts


See Parts



171.60


See Parts


See Parts


See Parts


See Parts



5,040.20

BXE10165 520/85R38 155A8 R1 Radial Front Tires for Duals Ready SPFH1) Includes 4 tires and wheels.2) Requires bundle BXE10227 for mounting hardware.3) Not compatible with standard body machines 7180-7580.4) For use in wide body machines 7780 and 7980 only.

5,218.40


683.10








OPERATOR STATION:Air Conditioned and Heated Cab with:Deluxe Air Suspension SeatTraining Seat with Cool BoxArm RestsOperator Presence Safety SwitchSafety Belts for Driver andTraining Seat




Built-In Electronic Diagnostics

LIGHTING EQUIPMENT:Halogen On-Highway HeadlightsHalogen Field Working LightsFront Field Working LightsRowfinder Field Lights(2) Spout LightsRear Hitch LightFront Clearance and Turn Signal LightsRear Stop and Turn SignalSMV SignCab Dome LightLadder LightRotating Beacon Light

DRIVE SYSTEM:Hydraulic Individual Wheel BrakesHydrostatic Ground Drive with25 mph (40 km/h) ProDrive Transmission


Engine Management in Field Mode forFuel Saving

ENGINE:Cummins 6 Cylinder 19.0L DieselTier II Emissions Compliant800 Hp (ECE R120 @ 1900 RPM)Direct Drive Engine Fan



CUTTERHEAD:Dura-Drum, 40 Knife

33 In. Wide, 26 In. Diameter1200 RPMAutomatic In-Cab Knife SharpeningStationary Knife with Tungsten






BLOWER:25 In. Wide, 22 In. Diameter1600 RPMShort Flat Spout200-Degree Spout Rotation with

Two-Speed ControlAutomatic Spout Positioning

ELECTRICAL SYSTEM:12-Volt Primary Electrical System with

One 150 AMP Alternator24-Volt Starting Electrical System with

One 70 AMP AlternatorUniversal Power Outlet StripThree Wet-Charged Batteries 12V - 174 AHBattery Disconnect Switch

CHASSIS:Attaching Frame for Harvesting UnitsHeavy Lift Cylinders for Harvesting UnitsRear Weight Carrier



480/80R26 160A8 R4Heavy-Duty, Non-Adjustable 2WD Axle


and Feedroll Housing291 U.S. (1100 L) Gallon Fuel TankStandard Rear Hitch and Rear Weight CarrierFire Extinguishers; (1) Dry and (1) LiquidDouble Acting Hydraulic Outlet


SUGGESTEDLIST PRICE

USD ($)







SUGGESTEDLIST PRICE

USD ($)












1,524.00


1,795.00




4,538.00





SUGGESTEDLIST PRICE

USD ($)

AG MANAGEMENT SOLUTIONS ...Continued...1815 AutoTrac RowSense, Manual RowSense, and AutoTrac Ready

1) Does not include GreenStar 3 2630 Display, StarFire 3000 receiver, or AutoTrac RowSenseActivation. Purchase separately from the AMS Price Pages.2) Capable of running RowSense functions, but header feelers must be ordered separately. IfAutoTrac and AutoTrac RowSense are to be operated together, then an AutoTrac RowSenseActivation is required in addition to a GreenStar 3 2630 or GreenStar 2 2600 Display and aStarFire 3000 or iTC Receiver. Manual RowSense does not require any activations oradditional equipment.3) RowSense feelers can be added as a factory option for new headers.4) RowSense feelers can be ordered from PDC for field conversion.

4,240.00


8,778.00



In Base Price


1,200.00

TRANSMISSION2063 ProDrive Transmission - 25 mph (40 km/h)




In Base Price

2235 Powered, ProDrive Non-Adjustable Rear Axle1) Requires ProDrive Transmission Code 2063.2) Fixed 2802 mm (110 In.) length without tires.3) See Tires Spacing Chart in the Agricultural Sales Manual for tread spacings available with

24,365.00





SUGGESTEDLIST PRICE

USD ($)

REAR AXLE ...Continued...specific tires.4) Rim offset used to adjust rear tread spacing.5) Rear axle capacity is 8.5 ton.



3,593.00

GREASE SYSTEM2510 Auto Lube System - Base Machine ONLY

1) Lubes base machine and non-powered or powered rear axle.2) Requires grass chute Code 3710.3) Requires BZ13798 Auto Lube System-Kernel Processor if Field Installed KP is ordered.

In Base Price


1,066.00



5,884.00




3330 Upper Front Feedroll with Straight Replaceable Smooth Bars 681.00





SUGGESTEDLIST PRICE

USD ($)

CUTTERHEAD FEEDROLLS ...Continued...1) Recommended for tall grass crops like barley and wheat.2) Not recommended for corn.




In Base Price


1) Chrome Plated Sawtooth (118 Teeth) KP Rolls.2) Includes drive parts for 1600 RPM blower speed.3) Includes Manually Driven KP Chain Hoist.4) Code 9370 Field Installed Wear Resistant Chute required to operate machine with KPremoved.5) AZ57329 Standard KP Adaptor Cover required to operate machine with KP in raisedposition IF Code 9370 Wear Resistant Chute is NOT ordered. See Parts.6) Code 8380 Electric Drive Upgrade for KP Chain Hoist strongly recommended to quicklyraise or lower KP when changing between grass or alfalfa and corn crops.7) Not for use in grass or alfalfa crops.8) 21% roll speed ratio.

20,775.00


23,073.00






1,318.00

CUTTERHEAD KNIFE AND SHEARBAR TYPE





SUGGESTEDLIST PRICE

USD ($)

CUTTERHEAD KNIFE AND SHEARBAR TYPE ...Continued...1) Grass knives are more resistant to wear from sand and small stones than corn knives.2) Grass knives provide better material flow in sticky alfalfa crops.3) Grass knives are less efficient in corn than corn knives.



DISCHARGE SPOUT5591 Short Flat Discharge Spout

1) Recommended when side loading into covered wagons or trucks.2) Code 8115 Two-Speed Spout Rotation available for faster rotation speed.3) Code 8115 in base equipment on 7980.4) Not orderable with rear mounted mirror Code 8134.

In Base Price


624.00


770.00



applications.


480/80R26 In. 160A8 (Rear)Continental Front and Goodyear Rear.Standard Body Width:Front and Rear: 3150 mm (10 Ft. 4 In.)


-1,534.00





SUGGESTEDLIST PRICE

USD ($)





-1,534.00




-16.00




716.00




-16.00




716.00





SUGGESTEDLIST PRICE

USD ($)





716.00




2,230.00




In Base Price



1,770.00


700.00





SUGGESTEDLIST PRICE

USD ($)







-834.00





236.00





-716.00





1,786.00





SUGGESTEDLIST PRICE

USD ($)






3,532.00


700.00


1,770.00




Same Price




-8,472.00


-6,942.00

BALLASTING7315 22 Quick-Attach Weights 40 Kg (88 Lb.) and 14 Rear Chassis Plates 6,635.00








SUGGESTEDLIST PRICE

USD ($)




Engine:8702 Ether Starting Aid Kit 176.00



162.00

8713 IVLOC Hydraulic Oil CoolerRecommended when operating at high ambient temperatures exceeding 90 degrees.

472.00

Hydraulics:8603 High Flow Rear Hydraulic Outlet



4,115.00


886.00



1,166.00



1,078.00


1,550.00





SUGGESTEDLIST PRICE

USD ($)




271.00


271.00




141.00



25.00



5,962.00


No Charge








725.00





SUGGESTEDLIST PRICE

USD ($)




717.00


1,391.00



No Charge


No Charge











SUGGESTEDLIST PRICE

USD ($)







See Parts

BZ13748 Standard All Crop Curved Chute1) Provides crop path from cutterhead to blower with kernel processor removed.

858.00




2,384.00


2,241.80


1,126.00


2,966.00


1,255.00






9,366.50


See Parts





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...AZ59204 Telescoping Driveshaft for Combine Corn Heads

Required to drive LH side of model year 2000 and newer combine corn heads.See Parts


See Parts


See Parts



Discharge Spout:BZ100239 Extension (Long), High Arch Spout


1,530.10


See Parts


788.70


5,875.10


4,838.90


5,176.00


4,487.00


1) Required for 120 In. tread spacing with 800/65R32 drive tires.2) Requires the following ordered separately through Parts:

- (2) AZ101235 Heavy-Duty Final Drives- (1) Z78685 RH Drive Shaft (504 mm)- (1) Z78684 LH Drive Shaft (560 mm)- (1) Z78681 Axle Truss Rod (2070 mm)

See Parts





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...AZ101235 Final Drive, Heavy-Duty Final Drive Assembly

1) Required for 120 In. tread spacing with 800/65R32 drive tires.2) Requires the following ordered separately through Parts:- (2) Z13329 Final Drive Spacers- (2) Z78681 Axle Truss Rod (2070 mm)- (1) Z78685 RH Drive Shaft (504 mm)- (1) Z78684 LH Drive Shaft (560 mm)

See Parts



See Parts



704.00



774.40


4,978.60




4,526.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BXE10081 IVLOC Hydraulic Oil Cooler

Recommended when operating at high ambient temperatures exceeding 90 degrees.570.90

BZ100174 Standard Flow Rear Hydraulic OutletMaximum Flow- 9 GPM for harvesters equipped with 3 Speed Manual-Shift Transmission, Code 2052.- 7 GPM for harvesters equipped with ProDrive Transmission, Code 2063.NOT compatible with Advanced Header Height Control, Harvester Code 2415.

1,411.30




418.00


2,063.60




217.80

BZ100161 Kernel Processor (Quick Change), Standard Sawtooth Rolls with Manually Adjustable RollClearance1) Requires the following to complete kernel processor field installation on harvesters notpreviously equipped with a kernel processor:- BZ13526 Kernel Processor Common Drive Parts.- BZ100162 Kernel Processor Rails.- BZ13789 Kernel Processor Drive Parts for harvesters with 1600 RPM blower speed.- BZ100818 Kernel Processor Hydraulic Parts for ALL harvesters equipped with ProDriveTransmissions or late production harvesters ONLY, manufactured AFTER Feb 08, with3-Speed Manual-Shift Transmissions; BZ13555 INSTEAD for early production, manufacturedFeb 08 or before.- BZ13668 Electrically Driven Kernel Processor Chain Hoist2) Requires AZ61628 or AZ63979 KP Standard or Stainless Steel Adapting Cover to harvestgrass or alfalfa crops with KP in RAISED position. See Parts.3) Not for use in grass or alfalfa crops.4) Drive belts NOT included. See Parts if required.

22,673.20


1,043.90


1,420.10







SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...AZ102632 Roll, (118T) Standard See Parts


See Parts


See Parts



171.60


See Parts


See Parts


See Parts


See Parts



5,040.20

BXE10165 520/85R38 155A8 R1 Radial Front Tires for Duals Ready SPFH1) Includes 4 tires and wheels.2) Requires bundle BXE10227 for mounting hardware.3) Not compatible with standard body machines 7180-7580.4) For use in wide body machines 7780 and 7980 only.

5,218.40


683.10




Rigid Mounting FrameFloating Auger with PaddlesGauge (Skid) ShoesFolding Pneumatic Gauge Wheels

18.5 x 8.5-8PRTransport Width:

9 Ft. 8 In. (3.0m)Working Width:

8 Ft. 4 In. (2.6m)Pickup Reel:

2 Cam Tracks - RH and LH Ends of Pickup(4) Bars with Standard Roller Bearings(40) Teeth/Bar

Hydraulic Compressor SheetOverrunning Pickup Reel Clutch

Enclosed in OilQuik-Tach SystemTrash NetChain Sprocket bundle 40/17 teethDrive Shaft with Radial Pin Slip Clutch

Additional ballast required; please see Agricultural Sales Manual for requirements.


SUGGESTEDLIST PRICE

USD ($)



For operation, Harvesting Units may require Attaching Frame. See Header CompatibilityChart in Agricultural Sales Manual.

5270KM 630C - 3.0 Meter Windrow Pickup 21,622.00

DESTINATION0119 United States or Canada (English Operator Manual and Decals) In Base Price

PICKUP REEL1400 Standard Roller Bearings In Base Price

1410 Heavy-Duty Roller Bearings 182.00

AUGER TYPE1600 Paddle Auger In Base Price

1610 Finger Auger Same Price

MOUNTING FRAME2000 Rigid Frame In Base Price

2005 Fixed Frame with Heavy Duty Clutch 971.00

2010 Pivoting Frame 1,941.00

2015 Pivoting Frame with Heavy Duty Clutch 2,912.00

GAUGE WHEELS3200 Manual Fold In Base Price

3210 Hydraulic Fold 589.00


630C - 3.0 Meter Windrow PickupEquipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)

GAUGE WHEELS ...Continued...

CROP COMPRESSOR TYPE4200 Hydraulic Compressor Sheet In Base Price

4210 Hydraulic Roller Compressor with Rake TinesRecommended to order Code 9080 in addition to Code 4210 for use in alfalfa harvesting.

2,094.00


Frame and Chassis:6575 Auto Lube System-Drive Chains 566.00

9058 Top Flight ReinforcementReduces flight deflection in heavy-duty conditions.

168.00

9060 Various Speed Kit for AugerContains the following components:

A) One red colored 15 tooth sprocketB) One red colored 32 tooth sprocketC) Shorter chain

Gives auger 4 possible speed combinations of 40/17, 40/15, 32/15, or 32/17

253.00

9070 Auger Lifting LinksRequires Hydraulic Roller Compressor (Code 4210).Lifts auger when roller compressor is fully raised to facilitate clean-out.NOT compatible with Hydraulic Compressor Sheet.

410.00

9080 Adjustable Alfalfa Plate for Roller Compression UnitRequires Code 4210. Includes trash net. Recommended for use in alfalfa in place of rake tinesin Code 4210.

801.00




Frame and Chassis:EC38515 Top Flight Reinforcement

Reduces flight deflection in heavy-duty conditions.168.00


630C - 3.0 Meter Windrow PickupContinued


Pivoting Mounting FrameFloating Auger with PaddlesGauge (Skid) ShoesFolding Pneumatic Gauge Wheels

18.5 x 8.5 - 8PRTransport Width:


11 Ft. 11 In. (3.6m)Pickup Reel:2 Cam Tracks - RH and LH Ends of Pickup

(8) Bars with Heavy-Duty Roller Bearings(28) Teeth/Bar

Hydraulic Compressor SheetCompensation Spring

Overrunning Pickup Reel ClutchEnclosed in Oil

Quik-Tach SystemExtension Plate for Lift CylinderTrash NetTransport Safety LightsChain Sprocket bundle 40/17 teethDrive Shaft with Radial Pin Slip Clutch



SUGGESTEDLIST PRICE

USD ($)








MOUNTING FRAME2010 Pivoting Frame In Base Price

2015 Pivoting Frame with Heavy Duty Clutch 971.00





2,586.00





SUGGESTEDLIST PRICE

USD ($)




168.00




253.00


410.00


1,149.00









Pivoting Mounting FrameFloating Auger with PaddlesGauge (Skid) ShoesFolding Pneumatic Gauge Wheels

18.5 x 8.5 - 8PRTransport Width:


13 Ft. 7 In. (4.1m)Pickup Reel:2 Cam Tracks - RH and LH Ends of Pickup

(8) Bars with Heavy-Duty Roller Bearings(32) Teeth/Bar

Hydraulic Compressor SheetCompensation Spring

Overrunning Pickup Reel ClutchEnclosed in Oil

Quik-Tach SystemExtension Plate for Lift CylinderTrash NetTransport Safety LightsChain Sprocket bundle 40/17 teethDrive Shaft with Radial Pin Slip Clutch



SUGGESTEDLIST PRICE

USD ($)








MOUNTING FRAME2010 Pivoting Frame In Base Price

2015 Pivoting Frame with Heavy Duty Clutch 971.00





2,679.00





SUGGESTEDLIST PRICE

USD ($)




168.00




253.00


410.00


1,356.00









Row Independent Rotary Cutting SystemOperating Width (9 Ft. 9 In.)

3-Row Wide or4-Row Narrow Application

Four Small Rotary Gathering Drums(Clutch Protected)

Two Rotating Feed Drums(Clutch Protected)

Main Drive Clutch

Left Hand and Right Hand Rotary DividersBuilt-In Storage StandsDriveshaft with 23 Splines

Special Notes: 1) Driveshaft with 21 splines for 6000 Series Forage Harvesters built before November 1996, SN502243 and below, order from PartsAZ46670 and replace on Universal Shaft LCA73023. 2) LOC output shaft may have been field modified to 23 splines. 3) Driveshaft with 23 splines for6000 and 7000 Series Forage Harvesters built after November 1996, SN502244 and above is in Equipment for Base Machine.


SUGGESTEDLIST PRICE

USD ($)


BASE MACHINEEX-WORKS Port of Entry

1075Z 684 Rotary Harvesting UnitSee Operator's Manual or Agricultural Sales Manual for ballast information.

60,993.00

MOUNTING FRAMES1005 7250-7550, 7200-7500 or all 6000 Series Rigid Frame In Base Price

ATTACHMENTS-ORDER AS DESIRED

Feeding Enhancements:9350 Crop Lifters for Small Grains - Fixed Position

Short lifter points (Qty 2) enhance performance in standing small grain crops.182.00

9355 Stalk Lifters for Down Corn - Fixed PositionEnhance performance in downed corn (Qty 8).

283.00

Operator Environment:9100 French Operator Manual and Decals No Charge

9105 Spanish Operator Manual and Decals No Charge


Feeding Enhancements:LCA84348 Bolt-on Cleaners and Modified Scrapers

For SN103690 and below.See Parts

LCA86918 Crop Lifters for Small Grains - Fixed Position1) Short points (Qty 2) enhance performance in standing small grain crops.2) SN103690 and below, ALSO order Bolt-on Cleaners and Modified Scrapers (LCA84348).

See Parts


684 Rotary Harvesting UnitEquipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...LCA77790 Extensions, Upright Center Feed Drum

SN104617 and below.Drums sit directly in front of the Harvester feedrolls. Aid in feeding in particularly tall (above10 Ft.) corn crops. Effect is diminished with the smaller heads.

379.00

LCA69196 Stalk Lifters for Down Corn - Fixed Position1) Enhance performance in downed corn.2) Quantity (2) required.3) Limited Complete Goods inventory. Order from Service Parts once inventory is depleted.

See Parts

Frame and Chassis:LCA77689 Liquid-Cooled Clutch Conversion

For SN051300-103953.See Parts

LCA93831 Liquid-Cooled Clutch ConversionFor SN103954 and above.

See Parts

LCA80088 Mounting Frame, Lateral Tilt - All John Deere 6000 Series or7200-7500 Harvesters

11,238.00

Row-Trak Guidance System (Metal Feelers):LCA73300 Sensors, Harvesting Unit - Row-Trak Guidance

1) Use with 30 In. Row Spacing only.2) Compatible with ALL 7050 Series OR newer 7000 Series Harvesters equipped withRow-Trak Guidance AND Dana rear axles.

See Parts

LCA95288 Sensors, Harvesting Unit - Row-Trak Guidance1) Use with 30 In. Row Spacing only.2) Compatible with ALL 6000 Series or older 7000 Series Harvesters equipped with Row-TrakGuidance AND Carraro rear axles.3) NOT compatible with 5000 Series Harvesters

See Parts


684 Rotary Harvesting UnitContinued


Row Independent Rotary Cutting System4.5m (14 Ft. 9 In.) Operating Width


Hydraulically Folded for TransportTwo Large and Two Small Rotary Gathering Drums

(Clutch Protected)Two Rotating Feed Drums (Clutch Protected)Main Drive Clutch

Left Hand and Right Hand Rotary DividersBuilt-In Storage StandsDriveshaft with 23 Splines

1) Driveshaft with 21 Splines for 6000 Series Forage Harvesters Built Before November 1996,SN502243 and Below, Order from Parts AZ46670 and Replace on Universal Shaft LCA73023.2) LOC Output Shaft May Have Been Field Modified to 23 Splines.3) Driveshaft with 23 Splines for 6000 and 7000 Series Forage Harvesters Built After November 1996,SN502244 and Above, is in Equipment for Base Machine.


SUGGESTEDLIST PRICE

USD ($)



1352Z 676 Rotary Harvesting Unit1) See Operator's Manual or Agricultural Sales Manual for proper Harvesterballast information.2) Harvester requirements:

- NOT compatible with ANY 5000 Series Harvester.- Double-Acting Hydraulic Outlet to fold harvesting unit for

transport.-- Code 6021 when ordering new 7250-7850 Harvesters; in base equipment for 7950.-- BZ100176 when upgrading 7250-7850 Harvesters from attachments; BZ13544 for

7200-7800 Harvesters.

79,506.00

MOUNTING FRAMES1004 7250-7550,7200-7500 or all 6000 Series Rigid Frame

and Liquid-Cooled Clutches1,467.00

1005 7250-7550, 7200-7500 or all 6000 Series Rigid Frame In Base Price

TRANSMISSION4005 Single Speed Gearbox In Base Price

4010 Two-Speed Gearbox 1,492.00





212.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS-ORDER AS DESIRED ...Continued...9812 Stalk Lifters for Down Corn - Floating

Enhance performance in downed corn (Qty 2).Can be used in combination with Code 9355; dealer installed in lieu of (2) lifters in Code9355.

605.00




Feeding Enhancements:LCA72750 Crop Lifters for Small Grains - Fixed Position

Short points (Qty 2) enhance performance in standing small grain crops.See Parts

LCA69196 Stalk Lifters for Down Corn - Fixed Position1) Enhance performance in downed corn.2) Quantity (1) required.3) Limited Completed Goods Inventory. Order from Service Parts once inventory is depleted.

See Parts

LCA67244 Stalk Lifters for Down Corn - FloatingEnhance performance in downed corn (Qty 2 per set); order (1) set.Can be used in combination with Code 9355 or LCA69196; dealer installed in lieu of (2) liftersin either case.

See Parts

Frame and Chassis:LCA79243 Liquid-Cooled Clutch Conversion See Parts


1) Required for all approved 6010 Series or 6050 Series Harvesters to fold 676, 686, 678, 688,710, 698, 690 Harvesting Units.2) Can be used to MANUALLY raise hay pickup harvesting unit compressor sheet.3) See harvesting units for Harvester requirements.

1,240.80

BZ13544 Double Acting Hydraulic Outlet1) Required for all approved 7000 Series Harvesters to fold 676, 686, 678, 688, 710, 698, 690harvesting units.2) NOT compatible with 7050 Series Harvesters.3) BZ13549, Single Acting Hydraulic Outlet, STILL required to enable hay pickup harvestingunit feature that AUTOMATICALLY raises compressor sheet when cutterhead feedrolls stop.4) Can be used instead of BZ13549, Single Acting Hydraulic Outlet, to MANUALLY raise haypickup harvesting unit compressor sheet.5) See harvesting units for Harvester requirements.

1,280.40





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BZ100176 Double Acting Hydraulic Outlet

1) Required for all approved 7050 Series Harvesters NOT already equipped with Code 6021 tofold 676, 686, 678, 688, 710, 698, 690, 692, 770 harvesting units.2) Harvester Code 6020 or BZ100175 Single Acting Hydraulic Outlet STILL required toenable hay pickup harvesting unit feature that AUTOMATICALLY raises compressor sheetwhen cutterhead feedrolls stop.3) Can be used in lieu of Harvester Code 6020 or BZ100175 Single Acting Hydraulic Outlet toMANUALLY raise compressor sheet.4) See harvesting units for Harvester requirements.

774.40

Row-Trak Guidance System (Metal Feelers):LCA67243 Sensors, Harvesting Unit - Row Trak Guidance


See Parts

LCA95294 Sensors, Harvesting Unit - Row-Trak Guidance1) Use with 30 In. Row Spacing only.2) Compatible with ALL 6000 Series or older 7000 Series Harvesters equipped with Row-TrakGuidance AND Carraro rear axles.3) NOT compatible with 5000 Series Harvesters.

See Parts

RowSense Guidance System (Reichard Yellow Feeler):LCA105080 Sensors, Harvesting Unit - RowSense

Required for small drum harvesting unit 676 when paired with MY11 and newer SPFH.See Parts

LCA105081 Sensors, Harvesting Unit - RowSenseRequired for small drum harvesting unit 676 when paired with MY10 and older SPFH.

See Parts








Row Independent Rotary Cutting SystemOperating Width: (14 Ft. 9 In.)


Hydraulically Folded for TransportSix Small Rotary Gathering Drums

(Clutch Protected)Two Rotating Feed Drums

(Clutch Protected)Main Drive Clutch

Left Hand and Right HandRotary Dividers

Built-In Storage StandsDriveshaft with 23 Splines

Special Notes: 1) Driveshaft with 21 Splines for 6000 Series Forage Harvesters built before November 1996, SN502243 and below, order from PartsAZ46670 and replace on Universal Shaft LCA73023. 2) LOC output shaft may have been field modified to 23 splines. 3) Driveshaft with 23 Splines for6000 and 7000 Series Forage Harvesters built after November 1996, SN502244 and above is in Equipment for Base Machine.


SUGGESTEDLIST PRICE

USD ($)



1089Z 686 Rotary Harvesting Unit1) See Operator's Manual or Agricultural Sales Manual for proper Harvesterballast information.2) Harvester requirements:

- Double-Acting Hydraulic Outlet to fold harvesting unit fortransport.-- Code 6021 when ordering new 7250-7850 Harvesters; in base equipment for 7950.-- BZ100176 when upgrading 7250-7850 Harvesters from attachments; BZ13544 for

7200-7800 Harvesters.

80,225.00

MOUNTING FRAMES1004 7250-7550,7200-7500 or all 6000 Series Rigid Frame

and Liquid-Cooled Clutches1,467.00

1005 7250-7550, 7200-7500 or all 6000 Series Rigid Frame In Base Price

1006 7250-7550, 7200-7500 or all 6000 Series Frame with Lateral TiltLateral Tilt is recommended for uneven field conditions. The frame will tilt with the field for aneven cut and higher productivity.

3,621.00





423.00






SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS-ORDER AS DESIRED ...Continued...9105 Spanish Operator Manual and Decals No Charge


Feeding Enhancements:LCA84349 Bolt-on Cleaners and Modified Scrapers

For SN103690 and below.See Parts

LCA84037 Crop Feeding EnhancementsUpgrades SN103690 and below with Model Year 2004 enhancements.Contains new drum covers with angle bar, upright center feeding drum extensions, (2) uprightand (2) spiral crop deflectors, and hardware.

See Parts

LCA86918 Crop Lifters for Small Grains - Fixed Position1) Short points (Qty 2) enhance performance in standing small grain crops.2) SN103690 and below, ALSO order Bolt-on Cleaners and Modified Scrapers (LCA84348).

See Parts

LCA77790 Extensions, Upright Center Feed DrumSN103690 and below.Drums sit directly in front of the Harvester feedrolls. Aid in feeding in particularly tall (above10 Ft.) corn crops. Effect is diminished with the smaller heads.

379.00

LCA76818 Short Point for Wide Rows1) Recommended for wide row corn crops.2) Quantity (4) required for 686 or 688 Harvesting Units.

See Parts


See Parts

Frame and Chassis:LCA77689 Liquid-Cooled Clutch Conversion

For SN051300-103953.See Parts

LCA93831 Liquid-Cooled Clutch ConversionFor SN103954 and above.

See Parts

LCA80088 Mounting Frame, Lateral Tilt - All John Deere 6000 Series or7200-7500 Harvesters

11,238.00



1,240.80





SUGGESTEDLIST PRICE

USD ($)


1) Required for all approved 7000 Series Harvesters to fold 676, 686, 678, 688, 710, 698, 690harvesting units.2) NOT compatible with 7050 Series Harvesters.3) BZ13549, Single Acting Hydraulic Outlet, STILL required to enable hay pickup harvestingunit feature that AUTOMATICALLY raises compressor sheet when cutterhead feedrolls stop.4) Can be used instead of BZ13549, Single Acting Hydraulic Outlet, to MANUALLY raise haypickup harvesting unit compressor sheet.5) See harvesting units for Harvester requirements.

1,280.40

BZ100176 Double Acting Hydraulic Outlet1) Required for all approved 7050 Series Harvesters NOT already equipped with Code 6021 tofold 676, 686, 678, 688, 710, 698, 690, 692, 770 harvesting units.2) Harvester Code 6020 or BZ100175 Single Acting Hydraulic Outlet STILL required toenable hay pickup harvesting unit feature that AUTOMATICALLY raises compressor sheetwhen cutterhead feedrolls stop.3) Can be used in lieu of Harvester Code 6020 or BZ100175 Single Acting Hydraulic Outlet toMANUALLY raise compressor sheet.4) See harvesting units for Harvester requirements.

774.40

Row-Trak Guidance System (Metal Feelers):LCA73300 Sensors, Harvesting Unit - Row-Trak Guidance


See Parts

LCA95288 Sensors, Harvesting Unit - Row-Trak Guidance1) Use with 30 In. Row Spacing only.2) Compatible with ALL 6000 Series or older 7000 Series Harvesters equipped with Row-TrakGuidance AND Carraro rear axles.3) NOT compatible with 5000 Series Harvesters

See Parts


Required for small drum harvesting units 686, 688, 710 and large drum harvesting units 678when paired with MY11 and newer SPFH.

See Parts

LCA104604 Sensors, Harvesting Unit - RowSenseRequired for small drum harvesting units 686, 688, 710 and large drum harvesting units 678when paired with MY10 and older SPFH.

See Parts








Row Independent Rotary Cutting SystemOperating Width (19 Ft. 8 In.)6-Row Wide or8-Row Narrow Application

Hydraulically Folded for TransportFour Large Rotary Gathering Drums(Clutch Protected)

Mechanical pivoting frameLiquid cooled friction clutchesTwo-speed gearbox

Rotary cutting disks with safety brakeOil-immersed transmissions and safety clutchesSaw-type rotor blades coated with tungsten carbide


SUGGESTEDLIST PRICE

USD ($)



0445KM 778 Rotary Harvesting Unit1) See Operator's Manual or Agricultural Sales Manual for proper Harvesterballast information.2) Harvester requirements:- NOT compatible with ANY 5000 Series Harvester.- Double-Acting Hydraulic Outlet to fold harvesting unit fortransport.- Drive tire load ratings:172A8 or HIGHER for Harvesters with 3 Speed Manual-Shift transmission.178A8 or HIGHER for Harvesters with 25 mph (40km/h) ProDrive transmission.3) Large Bore Lift Cylinders - 2.5 In. (63 mm) (AZ101924), order (2) viaService Parts, are recommended for ALL 7400 Harvesters OR 7500-7800Harvesters BELOW SN508100.4) When ordering for 7400-7800 or 7450-7950 Harvesters, check tire spacing chart inAgricultural Sales Manual for proper spacing in narrow and wide rows.

107,879.00

MOUNTING FRAMES1030 7750 or 7950 Frame with Lateral Tilt and Liquid-Cooled Clutches In Base Price

1015 7300, 7350, 7400, 7450, 7500, 7550 Frame with Lateral Tilt Same Price

OPERATOR ENVIRONMENT0119 English Operator Manual and Decals No Charge

ATTACHMENTS-FACTORY INSTALLED6200 Advanced Header Height Control (AHC)

Compatible with ALL 7080Series Harvesters equipped with Advance Header Height Control.NOT compatible with:- Ridge-till rows- Row spacings under 30 In.Limits minimum crop cut height (stubble height) to NOT less than 6 In.

3,794.00

6400 Manual RowSense1) Compatible with ALL Model Year 2011 Forage Harvesters and above2) Use with 30 In. Row Spacing3) Requires SPFH to be AutoTrac/RowSense Ready4) For Fusion with GPS, an AutoTrac and an AutoTrac RowSense activation from the AMS

2,152.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS-FACTORY INSTALLED ...Continued...Price Pages is required.





423.00




Advanced Header Height Control:LCA94223 Sensors, Harvesting Unit - Advanced Header Height Control

Compatible with ALL 7050 Series Harvesters equipped with Advance Header Height Control(Code 3610).Not compatible with:- Ridge-till rows- Row spacings under 30 In.Limits minimum crop cut height (stubble height) to NOT less than 6 In.

See Parts

Feeding Enhancements:LCA98587 Down Crop Kit

Fits all 678 Rotary Harvesting Units.See Parts


See Parts

LCA67244 Stalk Lifters for Down Corn - FloatingEnhance performance in downed corn (Qty 2 per set); order (2) sets.Can be used in combination with Code 9355 or LCA69196; dealer installed in lieu of (4) liftersin either case.

See Parts

Frame and Chassis:BZ100236 Reinforcement for Harvester Frame in Large Harvesting Unit Application

Required for 7450-7550 or 7400-7500 Harvesters equipped with 678 Harvesting Units;UNLESS Harvester originally ordered with Code 6074 Reinforcement.

2,401.30





SUGGESTEDLIST PRICE

USD ($)




1,240.80


1,280.40


774.40

AZ101924 Large Bore Lift Cylinder - 2.5 In. (63 mm)Quantity (2) are recommended for:- ALL 7400 Harvesters OR 7500-7800 Harvesters BELOW SN508100 in 678, 688, 698Harvesting Unit applications.- 7500-7800 Harvesters BELOW SN508100 in 710, 690 Harvesting Unit applications.

See Parts


Required for small drum harvesting units 686, 688, 710 and large drum harvesting units 678when paired with MY11 and newer SPFH.

See Parts

LCA104604 Sensors, Harvesting Unit - RowSenseRequired for small drum harvesting units 686, 688, 710 and large drum harvesting units 678when paired with MY10 and older SPFH.

See Parts










Hydraulically Folded for TransportFour Large and Two Small Rotary

Gathering Drums (Clutch Protected)Two Rotating Feed Drums (Clutch Protected)Two Rotating Feed Drum ExtensionsLiquid-Cooled Slip Clutch

Main Drive ClutchLeft Hand and Right Hand Rotary DividersBuilt-In Storage StandsDriveshaft with 23 Splines


SUGGESTEDLIST PRICE

USD ($)



0400KM 770 Rotary Harvesting Unit 126,496.00


ADAPTING FRAMES2010 Mechanical Pivoting Frame In Base Price

2015 Mechanical Pivoting Frame ready for support wheel adaptionReady to accept transport wheel without any additional parts. Refer to SPFH ballasting chart.

Same Price






848.00




Compatible with ALL 7080Series Harvesters equipped with Advance Header Height Control.3,794.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS-FACTORY INSTALLED ...Continued...NOT compatible with:- Ridge-till rows- Row spacings under 30 In.Limits minimum crop cut height (stubble height) to NOT less than 6 In.

6400 Manual RowSense1) Compatible with ALL Model Year 2011 Forage Harvesters and above2) Use with 30 In. Row Spacing3) Requires SPFH to be AutoTrac/RowSense Ready4) For Fusion with GPS, an AutoTrac and an AutoTrac RowSense activation from the AMSPrice Pages is required.

2,152.00



Compatible with ALL 7050 Series Harvesters equipped with Advance Header Height Control(Code 3610).Not Compatible with:- Ridge-till rows- Row spacings under 30 In.Limits minimum crop cut height (stubble height) to NOT less than 6 In.

See Parts

Hydraulics:BZ13118 Double Acting Hydraulic Outlet 1,240.80


774.40


Required for small drum Plus Series heads 698, 690, 692 and large drum harvesting unit 770when paired with M10 and older SPFH.

See Parts

LCA103611 Sensors, Harvesting Unit - RowSenseRequired for small drum Plus Series heads 698, 690, 692 and large drum harvesting unit 770when paired with M11 and newer SPFH.

See Parts





10-row Wide or12-row Narrow Application

Hydraulically Folded for TransportTwelve Small Rotary

Gathering Drums (Clutch Protected)Two Rotating Feed Drums (Clutch Protected)Saw-type rotor blades coated with tungsten carbideTwo Rotating Feed Drum ExtensionsLiquid-Cooled Slip ClutchMain Drive ClutchLeft Hand and Right Hand Rotary Dividers

Built-In Storage StandsDriveshaft with 23 splinesTwo-Speed GearboxDouble-Acting Hydraulic Outlet

(required code to order)Transport Wheel Required


SUGGESTEDLIST PRICE

USD ($)



0290KM 692 Rotary Harvesting Unit1) See Operator's Manual or Agricultural Sales Manual for proper Harvesterballast information.2) Requires 300F Support Wheel Code 0500KM.3) Harvester requirements:- 7750 (ABOVE SN510522) or 7950 Harvesters ONLY.- NOT recommended for 7550, 7750 (BELOW SN523523), or 7850 Harvesters because of liftcapacity.- Double-Acting Hydraulic Outlet to fold harvesting unit fortransport.-- Code 6021 when ordering new 7750 Harvesters; in base equipment for 7950.-- BZ100176 when upgrading 7750 Harvesters from attachments.- Drive tire load ratings 178A8 or HIGHER.- Rear tires 160A8 or HIGHER load rating.- Rear Weight Bracket.-- Code 6068 when ordering new 7750 or 7950 Harvesters.-- AZ54483 and AZ54357 when upgrading from Service Parts.-- Rear Weight Plates.-- Code 6086 when ordering new 7750 or 7950 Harvesters.-- Z48791 when upgrading from Service Parts.4) When ordering for 7750 or 7950 Harvesters, check tire spacing chart inAgricultural Sales Manual for proper spacing in narrow and wide rows.

156,908.00




3,794.00

6400 Manual RowSense1) Compatible with ALL Model Year 2011 Forage Harvesters and above

2,152.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS-FACTORY INSTALLED ...Continued...2) Use with 30 In. Row Spacing3) Requires SPFH to be AutoTrac/RowSense Ready4) For Fusion with GPS, an AutoTrac and an AutoTrac RowSense activation from the AMSPrice Pages is required.







See Parts


Required for 7550 or 7500 Harvesters equipped with 710, 690, 692 Harvesting Units; UNLESSHarvester originally ordered with Code 6074 Reinforcement.

2,401.30



1,240.80


774.40



See Parts





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...LCA103611 Sensors, Harvesting Unit - RowSense

Required for small drum Plus Series heads 698, 690, 692 and large drum harvesting unit 770when paired with M11 and newer SPFH.

See Parts








New designed central drum elements,increased capacity

Gathering drums are designed low andouter points are re-designed

Oil-immersed transmissions and safety clutchesSaw-type rotor blades coated with tungsten carbideRotary cutting discs with safety brakeOuter gathering drums hydraulically foldable for

road transportFixed frameLiquid-Cooled Slip ClutchTwo-speed gear boxBolt on wear plates for main frameSocket for the side lights/direction lights isrequiredDouble-Acting control unit for raising and lowering

theouter drums is required

Ballast recommendations should be followed inOperator ManualLength 2060mm (6 Ft. 9 In.)Overall Width 6050mm (19 Ft. 9 In.)Height (folded) 2500mm (8 Ft. 3 In.)Working Width 6000mm (19 Ft. 8 In.)Transport Width 3000mm (9 Ft. 9 In.)

Special Notes: 1) Driveshaft with 21 splines for 6000 Series Forage Harvesters built before November 1996, SN502243 and below, order from PartsAZ46670 and replace on Universal Shaft LCA73023. 2) LOC output shaft may have been field modified to 23 splines. 3) Driveshaft with 23 splines for6000 and 7000 Series Forage Harvesters built after November 1996, SN502244 and above is in Equipment for Base Machine.


SUGGESTEDLIST PRICE

USD ($)



0150KM 698 Rotary Harvesting Unit1) See Operator's Manual or Agricultural Sales Manual for proper Harvester ballastinformation.2) Harvester requirements:--Double-Acting Hydraulic Outlet to fold harvesting unit for transport.--Code 6021 when ordering new 7750 Harvesters. In base equipment for 7590.3) Refer to SPFH tire price pages for proper header compatibility and transport speedrequirements.

108,710.00



ADAPTING FRAMES2005 Mechanical Pivoting Frame

Requires purchase of additional parts to accept transport wheel. Refer to SPFH ballastingchart.

Same Price


Same Price

2000 Fixed Frame In Base Price






SUGGESTEDLIST PRICE

USD ($)



3,794.00


2,152.00


Feeding Enhancements:9355 Stalk Lifters for Down Corn - Fixed Position

Enhance performance in downed corn (Qty 16).564.00






See Parts



1,240.80


1,280.40





SUGGESTEDLIST PRICE

USD ($)


1) Required for all approved 7050 Series Harvesters NOT already equipped with Code 6021 tofold 676, 686, 678, 688, 710, 698, 690, 692, 770 harvesting units.2) Harvester Code 6020 or BZ100175 Single Acting Hydraulic Outlet STILL required toenable hay pickup harvesting unit feature that AUTOMATICALLY raises compressor sheetwhen cutterhead feedrolls stop.3) Can be used in lieu of Harvester Code 6020 or BZ100175 Single Acting Hydraulic Outlet toMANUALLY raise compressor sheet.4) See harvesting units for Harvester requirements.

774.40


See Parts



See Parts


See Parts








New designed central drum elements,increased capacity

Gathering drums are designed low andouter points are re-designed

Oil-immersed transmissions and safety clutchesSaw-type rotor blades coated with tungsten carbideRotary cutting discs with safety brakeOuter gathering drums hydraulically foldable for

road transportMechanical floating frameLiquid-Cooled Slip ClutchTwo-speed gear boxBolt on wear plates for main frameSocket for the side lights/direction lights isrequiredDouble-Acting control unit for raising and lowering

theouter drums is required

Ballast recommendations should be followed inOperator ManualLength 2060mm (6 Ft. 9 In.)Overall Width 7550mm (24 Ft. 9 In.)Height (folded) 2500mm (8 Ft. 3 In.)Working Width 7500mm (24 Ft. 6 In.)Transport Width 3300mm (10 Ft. 9 In.)


SUGGESTEDLIST PRICE

USD ($)



0160KM 690 Rotary Harvesting Unit1) See Operator's Manual or Agricultural Sales Manual for proper Harvester ballastinformation.2) Harvester requirements:--Double-Acting Hydraulic Outlet to fold harvesting unit for transport.--Code 6021 when ordering new 7750 Harvesters. In base equipment for 7590.3) Refer to SPFH tire price pages for proper header compatibility and transport speedrequirements.

133,833.00



ADAPTING FRAMES2005 Mechanical Pivoting Frame

Requires purchase of additional parts to accept transport wheel. Refer to SPFH ballastingchart.

In Base Price


Same Price



Compatible with ALL 7080Series Harvesters equipped with Advance Header Height Control.NOT compatible with:

3,794.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS-FACTORY INSTALLED ...Continued...- Ridge-till rows- Row spacings under 30 In.Limits minimum crop cut height (stubble height) to NOT less than 6 In.


2,152.00


Feeding Enhancements:9355 Stalk Lifters for Down Corn - Fixed Position

Enhance performance in downed corn (Qty 20).706.00






See Parts


Required for 7550 or 7500 Harvesters equipped with 710, 690, 692 Harvesting Units; UNLESSHarvester originally ordered with Code 6074 Reinforcement.

2,401.30



1,240.80





SUGGESTEDLIST PRICE

USD ($)


1) Required for all approved 7000 Series Harvesters to fold 676, 686, 678, 688, 710, 698, 690harvesting units.2) NOT compatible with 7050 Series Harvesters.3) BZ13549, Single Acting Hydraulic Outlet, STILL required to enable hay pickup harvestingunit feature that AUTOMATICALLY raises compressor sheet when cutterhead feedrolls stop.4) Can be used instead of BZ13549, Single Acting Hydraulic Outlet, to MANUALLY raise haypickup harvesting unit compressor sheet.5) See harvesting units for Harvester requirements.

1,280.40


774.40


See Parts



See Parts


See Parts








Support Wheel for 690 and 692Safe and comfortable road transportation with 40km/hReduced axle loadsMinimum lifting of the header during transportrequiredFully automatic locking and unlockingRoad protection and road light integrated in theheaderDriver does not have to leave the cab when changing(SPFH must be equipped with lift cylinders of 63mm(2.5 in.))Length 2690 mm (106 in.)

Overall Width 2860 mm (9 ft. 4 in.)Height 1430 mm (56 in.)Weight 290 kg (639 lb.)Axle load limit 2000 kg (4409 lb.)

Maximum 11500 kg (25,353 lb.) Front Axle loadof SPFH

Tires 15.0 / 55 - 17 AW 705 14 PR TL


SUGGESTEDLIST PRICE

USD ($)



0500KM 300F Support Wheel1) Required for road transport of 692 Harvesting Unit.

2,678.00





300F Support WheelEquipment for Base Machine



300F Support WheelContinued



Support Wheel for 770Safe and comfortable road transportation with 40km/hReduced axle loadsMinimum lifting of the header during transportrequiredFully automatic locking and unlockingDriver does not have to leave the cab when changing

(SPFH must be equipped with lift cylinders of63mm (2.5 in.))

Length 3310 mm (130 in.)Overall Width 2860 mm (9 ft. 4 in.)

Height 1430 mm (56 in.)Weight 315 kg (695 lb.)Axle load limit 2000 kg (4409 lb.)

Maximum 11500 kg (25,353 lb.) Front Axle load ofSPFHTires 15.0/55 - 17 AW 705 14PR TL


SUGGESTEDLIST PRICE

USD ($)



0510KM 400F Support Wheel 2,678.00






400F Support WheelEquipment for Base Machine



400F Support WheelContinued



Durability Rated Up to 235 PTOHorsepower

1000 RPM ASAE Category 5 (Up to 150PTO HP), Telescoping PTO Hookup

PTO Holder and Hose Support850 RPM Cutterhead, 22 In. Wide

and 18 In. Diameter48 Tungsten Carbide Coated KnivesTractor-Powered SharpenerEasily Adjusted, Reversible,

Stationary Knife with VerticalEdge Tungsten Carbide Coated

Four Feed RollsUpper Rolls - Slip Clutch Protected with AlertLower Rolls - Slip Clutch Protected

4-Function Electrohydraulic Controls -(Less Mounting Brackets) - ForClosed-Center Hydraulic System(Connects to Tractor Convenience Outlet)

Easily Adjusted Length of Cut

31x13.5-15 8PR TiresCantilever Auger with SupportElectric Header Downstop ControlEqual Angle HitchWide Swing Long TongueIntegral Hydraulic Lift Cylinder with

Mechanical Lock for Harvesting UnitsTwo-Speed Blower Fan (722 and 1000 RPM)Spout with Wear LinersTongue JackSafety ChainTransport Warning LightsLess Harvesting Unit - Order Separately

1. Pull-Type Forage Harvester is not compatible with John Deere 8520, 8430, 8530 and 9000 Series 4WD Articulated Tractors. 2. For Tractors notequipped with a Convenience Outlet, order AE50549, 3-Terminal Convenience Outlet Wiring Harness from Parts. 3. To adapt Electrohydraulic ControlConsole to 2-Terminal Tractor Convenience Outlet, order AA37254, Wiring Harness, from Parts.


SUGGESTEDLIST PRICE

USD ($)



2614E 3975 Pull-Type Forage Harvester, 1000 RPM 37,477.00

DESTINATION



(Export) Asia:0075 Indonesia


0093 PakistanA COMAR Net Charge for rust proofing will be added when this code is ordered.

Net Item Charge

0081 KazakhstanA COMAR Net Charge for rust proofing will be added when this code is ordered.

Net Item Charge

0109 VietnamA COMAR Net Charge for rust proofing will be added when this code is ordered.

Net Item Charge


3975 Pull-Type Forage Harvester, 1000 RPMEquipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)


(Export) Eastern Europe:0166 Ukraine




(Export) South America:0214 Colombia


0217 ParaguayA COMAR Net Charge for rust proofing will be added when this code is ordered.

Net Item Charge

0218 PeruA COMAR Net Charge for rust proofing will be added when this code is ordered.

Net Item Charge



Same Price


Same Price


Same Price


Same Price


Same Price

0433 RussianText free decals and Russian operator manual.

Same Price

PACKAGES

1-3/8 In. Diameter PTO, Kernel Processor Packages0611 IntelliGuard Metal Detector, 1-3/8 Diameter PTO, Electrohydraulic Tongue Positioning and

Kernel ProcessorIntelliGuard Metal Detector, 1-3/8 In. PTO Hookup, Electrohydraulic Tongue Positioning andKernel Processor (Codes 1010, 3000, 4010 and 7600) will automatically be added along withthe associated incremental pricing for each.

In Configuration


3975 Pull-Type Forage Harvester, 1000 RPMContinued



SUGGESTEDLIST PRICE

USD ($)

PACKAGES ...Continued...0614 1-3/8 Diameter PTO, Electrohydraulic Tongue Positioning and Kernel Processor

LESS IntelliGuard Metal Detector, 1-3/8 In. PTO Hookup, Electrohydraulic TonguePositioning and Kernel Processor (Codes 1040, 3000, 4010 and 7600) will automatically beadded along with the associated incremental pricing for each.

In Configuration

0615 1-3/8 Diameter PTO, Tractor SCV Controlled Hydraulic Tongue Positioning and KernelProcessorLESS IntelliGuard Metal Detector, 1-3/8 In. PTO Hookup, Tractor SCV Controlled HydraulicTongue Positioning and Kernel Processor (Codes 1040, 3000, 4000 and 7600) willautomatically be added along with the associated incremental pricing for each.

In Configuration

1-3/4 In. Diameter PTO, Kernel Processor Packages0603 IntelliGuard Metal Detector, 1-3/4 Diameter PTO, Tractor SCV Controlled Hydraulic Tongue

Positioning and Kernel ProcessorIntelliGuard Metal Detector, 1-3/4 In. PTO Hookup, Tractor SCV Controlled HydraulicTongue Positioning and Kernel Processor (Codes 1010, 3010, 4000 and 7600) willautomatically be added along with the associated incremental pricing for each.

In Configuration

0610 1-3/4 Diameter PTO, Electrohydraulic Tongue Positioning and Kernel ProcessorLESS IntelliGuard Metal Detector, 1-3/4 In. PTO Hookup, Electrohydraulic TonguePositioning and Kernel Processor (Codes 1040, 3010, 4010 and 7600) will automatically beadded along with the associated incremental pricing for each.

In Configuration

1-3/8 In. Diameter PTO, IntelliGuard Packages0601 IntelliGuard Metal Detector, 1-3/8 Diameter PTO and Tractor SCV Controlled Hydraulic

Tongue PositioningIntelliGuard Metal Detector, 1-3/8 In. PTO Hookup and Tractor SCV Controlled HydraulicTongue Positioning LESS Kernel Processor (Codes 1010, 3000, 4000 and 7695) willautomatically be added along with the associated incremental pricing for each.

In Configuration

0602 IntelliGuard Metal Detector, 1-3/8 Diameter PTO and Electrohydraulic Tongue PositioningIntelliGuard Metal Detector, 1-3/8 In. PTO Hookup and Electrohydraulic Tongue PositioningLESS Kernel Processor (Codes 1010, 3000, 4010 and 7695) will automatically be added alongwith the associated incremental pricing for each.

In Configuration

1-3/4 In. Diameter PTO, IntelliGuard Packages0604 IntelliGuard Metal Detector, 1-3/4 Diameter PTO and Tractor SCV Controlled Hydraulic

Tongue PositioningIntelliGuard Metal Detector, 1-3/4 In. PTO Hookup and Tractor SCV Controlled HydraulicTongue Positioning LESS Kernel Processor (Codes 1010, 3010, 4000 and 7695) willautomatically be added along with the associated incremental pricing for each.

In Configuration

0605 IntelliGuard Metal Detector, 1-3/4 Diameter PTO and LESS Hydraulic Tongue PositioningIntelliGuard Metal Detector, 1-3/4 In. PTO Hookup, LESS Hydraulic Tongue Positioning andLESS Kernel Processor (Codes 1010, 3010, 4095 and 7695) will automatically be added alongwith the associated incremental pricing for each.

In Configuration

0612 IntelliGuard Metal Detector, 1-3/4 Diameter PTO and Electrohydraulic Tongue PositioningIntelliGuard Metal Detector, 1-3/4 In. PTO Hookup and Electrohydraulic Tongue PositioningLESS Kernel Processor (Codes 1010, 3010, 4010 and 7695) will automatically be added alongwith the associated incremental pricing for each.

In Configuration





SUGGESTEDLIST PRICE

USD ($)


1-3/8 In. Diameter PTO, LESS Metal Detector Packages0606 1-3/8 Diameter PTO and Tractor SCV Controlled Hydraulic Tongue Positioning

LESS IntelliGuard Metal Detector, 1-3/8 In. PTO Hookup and Tractor SCV ControlledHydraulic Tongue Positioning LESS Kernel Processor (Codes 1040, 3000, 4000 and 7695)will automatically be added along with the associated incremental pricing for each.

In Configuration

0607 1-3/8 Diameter PTO and Electrohydraulic Tongue PositioningLESS IntelliGuard Metal Detector, 1-3/8 In. PTO Hookup and Electrohydraulic TonguePositioning LESS Kernel Processor (Codes 1040, 3000, 4010 and 7695) will automatically beadded along with the associated incremental pricing for each.

In Configuration

0608 1-3/8 Diameter PTO and LESS Hydraulic Tongue PositioningLESS IntelliGuard Metal Detector, 1-3/8 In. PTO Hookup, LESS Hydraulic TonguePositioning and LESS Kernel Processor (Codes 1040, 3000, 4095 and 7695) will automaticallybe added along with the associated incremental pricing for each.

In Configuration

1-3/4 In. Diameter PTO, LESS Metal Detector Packages0609 1-3/4 Diameter PTO and Tractor SCV Controlled Hydraulic Tongue Positioning

LESS IntelliGuard Metal Detector, 1-3/4 In. PTO Hookup and Tractor SCV ControlledHydraulic Tongue Positioning LESS Kernel Processor (Codes 1040, 3010, 4000 and 7695)will automatically be added along with the associated incremental pricing for each.

In Configuration

0613 1-3/4 Diameter PTO and Electrohydraulic Tongue PositioningLESS IntelliGuard Metal Detector, 1-3/4 In. PTO Hookup and Electrohydraulic TonguePositioning LESS Kernel Processor (Codes 1040, 3010, 4010 and 7695) will automatically beadded along with the associated incremental pricing for each.

In Configuration

FACTORY INSTALLED INTELLIGUARD METAL DETECTOR1010 IntelliGuard Metal Detector (Iron-Based Metals Only) Includes

Upper and Lower Slip Clutches5,033.00

1040 Less IntelliGuard Metal Detector with Upper Slip Clutchwith Alert and Lower Slip Clutch

In Base Price

PTO, UNIVERSAL JOINT AND HITCH3000 1000 RPM ASAE Category 5 PTO Telescoping Hookup for Tractors

up to 150 PTO Horsepower with 1-3/8 In. Diameter PTO ShaftIncludes 10-In. Equal Angle Hitch 2-1/4" x 3-1/2" Maximum Drawbar Section.

In Base Price

3010 1000 RPM ASAE Category 6 PTO Telescoping Hookup for Tractorsup to 235 PTO Horsepower with 1-3/4 In. Diameter PTO ShaftIncludes 5 1/2"-In. Equal Angle Hitch 2-1/4" x 4" Maximum Drawbar Section.

322.00

HYDRAULIC TONGUE POSITIONING4000 Hydraulic Tongue Positioning - Uses Tractor SCV

(Requires Two Tractor SCV's)1,059.00

4010 Hydraulic Tongue Positioning - Uses Factory Installed FifthFunction Electrohydraulic Valve (Included)

1,723.00

4095 Less Hydraulic Tongue Positioner In Base Price





SUGGESTEDLIST PRICE

USD ($)

FACTORY INSTALLED KERNEL PROCESSOR7600 Kernel Processor

Includes one right-hand 6" wheel extension.12,791.00

7695 Less Kernel Processor In Base Price


Discharge Spout:9010 Extension, 10 In. Vertical 393.00

9015 Extension, 20 In. Vertical 452.00


9025 Extension, 24 In . Horizontal 116.00

9030 Extension, 54 In. Horizontal 498.00

Frame and Chassis:9003 Hay Pickup Float System

Hay pickup attachment requires gauge wheels.1,546.00

9004 (Export Only) Hay Pickup Float SystemHay pickup attachment requires gauge wheels.

1,546.00

Hitch and Drawbar:9045 Wagon Transport Hitch 245.00

Hydraulics:9005 Wagon Disconnect, Hydraulic 545.00

Monitors/Displays/Controllers:9001 Mounting Brackets for PT Harvester Control Console - 6000, 7000 or

8000 Series Tractor Models with ComfortGard Cab1) For 6000 Tractor, order one A53255 Strap, one L76331 Grommet, and one A53176 Bracketfrom Parts.2) Not compatible with any articulated 4WD Tractors (Older 8000 Series 4WD models orcurrent 9000 Series 4WD models).

93.00

9002 Mounting Brackets for PT Harvester Control Console - Tractor Models withSoundGard Cab

93.00





SUGGESTEDLIST PRICE

USD ($)


ALLIED SUPPLIER INFORMATIONFOR SPRAYER ATTACHMENTS CONTACT:

Harvest Tec, Inc.P.O. Box 63Hudson, WI 54016Telephone: (715) 386-9100 or (800) 635-7468Fax: (715) 386-9509

For 9-1/2' HAY PICK-UP CONTACT:

RCI Engineering LLC970 Metalcraft DriveMayville, WI 53050Telephone: (toll free) (888) 472-4552Fax: (920) 387-9806Email: [email protected]: www.RCIengineering.com

FOR TANDEM AXLES CONTACT:




Cutterhead:BE24288 Anti-Carryover Enhancement and Feedroll Pan

Anti-Carryover Enhancement is included in base equipment for 3975 Harvester SN340101 andABOVE.

631.40

AE37435 Lower Feed Roll Pan See Parts

E69877 Upper Feed Roll Fillers for Machines WITH IntelliGuardMetal Detector

See Parts

E62946 Upper Feed Roll Fillers for Machines WITHOUT IntelliGuardMetal Detector

See Parts

Discharge Spout:BE21792 Extension, 10 In. Vertical 432.30

BE21793 Extension, 20 In. Vertical 497.20

BE21795 Extension, 24 In . Horizontal 127.60






SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BE21796 Extension, 54 In. Horizontal 547.80

Drivelines:BE23456 PTO Driveline, 1-3/4 In. 1000 RPM ASAE Category 6 Telescoping

Tractor HookupRecommended for tractors up to 235 PTO horsepower.Includes 5-1/2 In. Equal Angle Hitch 2-1/4 x 4 In. Maximum Drawbar Section.

2,160.40

BE23455 PTO Driveline, 1-3/8 In. 1000 RPM ASAE Category 5 TelescopingTractor HookupRecommended for tractors up to 150 PTO horsepower.Includes 10 In. Equal Angle Hitch 2-1/4 x 3-1/2 In. Maximum Drawbar Section.

1,767.70




See Parts

BE24142 Electric Header Downstop Control 166.10

AA37254 Harness, Convenience Outlet See Parts

Frame and Chassis:BE32242 (Export Only) Hay Pickup Float System


BE24225 Cantilever Cross AugerFor use with longer cut materials, particularly in grassy crops. Recommended when using lessthan standard number of knives with long length of cut.

1,342.00

AE55160 Float Lockout Parts for Row-Crop Heads See Parts

BE24139 Hay Pickup Float SystemHay pickup attachment requires gauge wheels.

1,700.60

AE38859 Sprocket, Speed Up Drive for Harvesting Unit See Parts

BE24137 Tongue, LongCompatible with all Harvesting Units. REQUIRED for 3-Row Row-Crop.

2,884.20

BE24136 Tongue, ShortCompatible with all Harvesting Units EXCEPT 3-Row Row-Crop.

2,451.90

BE24234 Two-Row Row-Crop 30 In. Crop DeflectorRecommended when using a 2-Row Row-Crop Harvesting Unit on a 3975 with a KernelProcessor to harvest corn. The deflector guides the corn away from the right wheel to preventdriveover.

337.70

AE73318 Wheel Extensions, 13 In. (Kernel Processor)1) See Agricultural Sales Manual for recommended usage.2) Compatible with all PTFH models.

See Parts





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...AE37443 Wheel Extensions, 13 In. (Non-Kernel Processor)

1) See Agricultural Sales Manual for recommended usage.2) Not compatible with PTFH's equipped with kernel processors.

See Parts


See Parts

AE37288 Wheel Extensions, 6 In. (Non-Kernel Processor)1) See Agricultural Sales Manual for recommended usage.2) Not compatible with PTFH's equipped with kernel processors.

See Parts

Hitch and Drawbar:BE24262 Safety Chain for Towed Equipment, 30,000 Lb. (135 kN) 99.00

BE21559 Wagon Disconnect, Rope Controlled 262.90

BE22588 Wagon Transport Hitch 269.50

Hydraulics:BE24140 Unloader Valve

Required for PT Harvesters used on tractors with open-center hydraulic systems.487.30

BE24147 Wagon Disconnect, Hydraulic 599.50

Kernel Processor:E82575 Decal, Warning (French)

For field conversions, order decals from Parts.See Parts

E82508 Decal, Warning (Spanish)For field conversions, order decals from Parts.

See Parts

BE30003 Kernel ProcessorFor any machine configuration, a minimum of at least a 6 In. right-hand wheel extension isrequired. AE37288, 6 In. wheel extension, is available through Parts.

15,476.51

E125783 Kernel Processor Manual, Operator (French)1) When ordering French Operator's Manual for field conversions, decals must also beordered.2) For field conversions, order manual from Distribution Service Center.

See Parts

E125784 Kernel Processor Manual, Operator (Spanish)1) When ordering Spanish Operator's Manual for field conversions, decals must also beordered.2) For field conversions, order manual from Distribution Service Center.

See Parts

Monitors/Displays/Controllers:BE24138 Mounting Brackets for PT Harvester Control Console - 6000, 7000 or


102.30





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BE23596 Mounting Brackets for PT Harvester Control Console - Tractor Models with

SoundGard Cab102.30

Operator Environment:E125780 Decal, Operating (French)

For field conversions, order decals from Parts. Requires three.See Parts

E125781 Decal, Operating (Spanish)For field conversions, order decals from Parts. Requires three.

See Parts

RE20352 Exterior Convex Rearview Mirror with Mounting Bracket forJohn Deere Tractors with Sound-Gard BodyOrder from Waterloo.

See Parts

RE55262 External Mirrors, RH and LH, Manual AdjustmentFor 7000 Series Tractors with ComfortGard Cab. Order from Waterloo.

649.00

AL80126 Mirror, Telescopic, LH, Manually Adjustable 168.30

AL80127 Mirror, Telescopic, RH, Manually Adjustable 168.30








Durability Rated Up to 150PTO Horsepower

1000 RPM ASAE Category 5, TelescopingPTO Hookup

PTO Holder and Hose Support850 RPM Cutterhead, 18 In. Wide

and 18 In. Diameter36 Tungsten Carbide Coated KnivesTractor-Powered SharpenerEasily Adjusted, Reversible,

Stationary KnifeFour Feed Rolls

Upper Rolls - Slip Clutch Protected with AlertLower Rolls - Slip Clutch Protected

4-Function Electrohydraulic Controls(Less Mounting Brackets) - ForClosed-Center Hydraulic System(Connects to Tractor Convenience Outlet)

Easily Adjusted Length of Cut

31x13.5-15 8PR TiresEqual Angle HitchWide Swing Long TongueCantilever Auger with Support

Electric DownstopIntegral Hydraulic Lift Cylinder with

Mechanical Lock for Harvesting UnitsTwo-Speed Blower Fan (722 and 1000 RPM)Spout with Wear LinerTongue JackSafety ChainTransport Warning LightsLess Harvesting Unit - Order Separately

1. Pull-Type Forage Harvester is not compatible with any John Deere 8000 or 4WD Articulated 9000 Series Tractors. 2. For tractors not equipped with aconvenience outlet, Order AE50549, 3-Terminal Outlet Wiring Harness From Parts. 3. To adapt Electrohydraulic Control Console to 2-Terminal TractorConvenience Outlet, order AA37254, Wiring Harness, from Parts.


SUGGESTEDLIST PRICE

USD ($)



2604E 3955 Pull-Type Forage Harvester, 1000 RPM 28,429.00

DESTINATION



(Export) Asia:0075 Indonesia


0092 OmanA COMAR Net Charge for rust proofing will be added when this code is ordered.

Net Item Charge

0079 JapanA COMAR Net Charge for rust proofing will be added when this code is ordered.

Net Item Charge

0122 ArmeniaA COMAR Net Charge for rust proofing will be added when this code is ordered.

Net Item Charge


Net Item Charge


3955 Pull-Type Forage Harvester, 1000 RPMEquipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)

DESTINATION ...Continued...0109 Vietnam








0214 ColombiaA COMAR Net Charge for rust proofing will be added when this code is ordered.

Net Item Charge


Net Item Charge


Net Item Charge

0189 El SalvadorA COMAR Net Charge for rust proofing will be added when this code is ordered.

Net Item Charge



Same Price


Same Price


Same Price


Same Price


Same Price


Same Price


Same Price

0401 ArabicText free decals and Arabic operator manual.

Same Price





SUGGESTEDLIST PRICE

USD ($)

LANGUAGE AND DECALS ...Continued...

PACKAGES

IntelliGuard Packages0601 IntelliGuard Metal Detector and Tractor SCV Controlled Hydraulic Tongue Positioning

IntelliGuard Metal Detector and Tractor SCV Controlled Hydraulic Tongue Positioning(Codes 1010 and 4000) will automatically be added along with the associated incrementalpricing for each.

In Configuration

0602 IntelliGuard Metal Detector and Electrohydraulic Tongue PositioningIntelliGuard Metal Detector and Electrohydraulic Tongue Positioning (Codes 1010 and 4010)will automatically be added along with the associated incremental pricing for each.

In Configuration

0605 IntelliGuard Metal Detector LESS Hydraulic Tongue PositioningIntelliGuard Metal Detector LESS Hydraulic Tongue Positioning (Codes 1010 and 4095) willautomatically be added along with the associated incremental pricing for each.

In Configuration

LESS Metal Detector Packages0606 Tractor SCV Controlled Hydraulic Tongue Positioning

LESS IntelliGuard Metal Detector with Tractor SCV Controlled Hydraulic Tongue Positioning(Codes 1040 and 4000) will automatically be added along with the associated incrementalpricing for each.

In Configuration

0607 Electrohydraulic Tongue PositioningLESS IntelliGuard Metal Detector with Electrohydraulic Tongue Positioning (Codes 1040 and4010) will automatically be added along with the associated incremental pricing for each.

In Configuration

0608 LESS Hydraulic Tongue PositioningLESS IntelliGuard Metal Detector and LESS Hydraulic Tongue Positioning (Codes 1040 and4095) will automatically be added along with the associated incremental pricing for each.

In Configuration

FACTORY INSTALLED INTELLIGUARD METAL DETECTOR1010 IntelliGuard Metal Detector (Iron-Based Metals Only) Includes

Upper and Lower Slip Clutches5,033.00

1040 Less IntelliGuard Metal Detector with Upper Slip Clutchwith Alert and Lower Slip Clutch

In Base Price

HYDRAULIC TONGUE POSITIONING4000 Hydraulic Tongue Positioning - Uses Tractor SCV

(Requires Two Tractor SCV's)1,059.00

4010 Hydraulic Tongue Positioning - Uses Factory Installed FifthFunction Electrohydraulic Valve (Included)

1,723.00

4095 Less Hydraulic Tongue Positioner In Base Price


Discharge Spout:9010 Extension, 10 In. Vertical 393.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS - ORDER AS DESIRED ...Continued...9015 Extension, 20 In. Vertical 452.00



9030 Extension, 54 In. Horizontal 498.00

Frame and Chassis:9003 Hay Pickup Float System


9004 (Export Only) Hay Pickup Float SystemHay pickup attachment requires gauge wheels.

1,546.00

Hitch and Drawbar:9000 Wagon Disconnect, Rope Controlled 239.00

9045 Wagon Transport Hitch 245.00

Hydraulics:9005 Wagon Disconnect, Hydraulic 545.00

Monitors/Displays/Controllers:9001 Mounting Brackets for PT Harvester Control Console - 6000, 7000 or


93.00

9002 Mounting Brackets for PT Harvester Control Console - Tractor Models withSoundGard Cab

93.00





SUGGESTEDLIST PRICE

USD ($)


ALLIED SUPPLIER INFORMATIONFOR SPRAYER ATTACHMENTS CONTACT:

Harvest Tec, Inc.P.O. Box 63Hudson, WI 54016Telephone: (715) 386-9100 or (800) 635-7468Fax: (715) 386-9509

FOR TANDEM AXLES CONTACT:




Cutterhead:AE37439 Lower Feed Roll Pan See Parts

E62945 Upper Feed Roll Fillers for Machines WITHOUT Iron-GardMetal Detector

See Parts

E69878 Upper Feed Roll Fillers for machines WITH Iron-GardMetal Detector

See Parts

Discharge Spout:BE21792 Extension, 10 In. Vertical 432.30


BE21795 Extension, 24 In . Horizontal 127.60


BE21796 Extension, 54 In. Horizontal 547.80




See Parts

BE24142 Electric Header Downstop Control 166.10





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...AA37254 Harness, Convenience Outlet See Parts



BE24225 Cantilever Cross AugerFor use with longer cut materials, particularly in grassy crops. Recommended when using lessthan standard number of knives with long length of cut.

1,342.00

AE55160 Float Lockout Parts for Row-Crop Heads See Parts

BE24139 Hay Pickup Float SystemHay pickup attachment requires gauge wheels.

1,700.60

AE38859 Sprocket, Speed Up Drive for Harvesting Unit See Parts

BE24137 Tongue, LongCompatible with all Harvesting Units. REQUIRED for 3-Row Row-Crop.

2,884.20

BE24136 Tongue, ShortCompatible with all Harvesting Units EXCEPT 3-Row Row-Crop.

2,451.90


See Parts


See Parts


BE21559 Wagon Disconnect, Rope Controlled 262.90

BE22588 Wagon Transport Hitch 269.50



BE24147 Wagon Disconnect, Hydraulic 599.50

Monitors/Displays/Controllers:BE24138 Mounting Brackets for PT Harvester Control Console - 6000, 7000 or


102.30

BE23596 Mounting Brackets for PT Harvester Control Console - Tractor Models withSoundGard Cab

102.30





SUGGESTEDLIST PRICE

USD ($)



John Deere Tractors with Sound-Gard BodyOrder from Waterloo.

See Parts

RE55262 External Mirrors, RH and LH, Manual AdjustmentFor 7000 Series Tractors with ComfortGard Cab. Order from Waterloo.

649.00

AL80126 Mirror, Telescopic, LH, Manually Adjustable 168.30

AL80127 Mirror, Telescopic, RH, Manually Adjustable 168.30








TWO-ROW NARROW AND TWO-ROWWIDE ROW-CROPS:

Rubber Gathering BeltsPower CornerLow-Profile Stalk GuidesOscillating Knife with

Tungsten Carbide EdgesFloating Gathering Points

Slip ClutchBuilt-In Storage Stand


SUGGESTEDLIST PRICE

USD ($)



For 3955 and 3975 Pull-Type Forage Harvesters.

When harvesting dry, whole-plant corn and grain sorghum heads, the use of a pan under thelower feedrolls is recommended. Order this from Parts.

Fits 3940, 3950, 3955, 3960, 3970, and 3975 Pull-Type Forage Harvesters.

6313E Two-Row Row-Crop Narrow Harvesting Unit 8,438.00

DESTINATION



(Export) Asia:0092 Oman



Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge




Two-Row Row-Crop Narrow Harvesting UnitEquipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)







Net Item Charge


Net Item Charge


Net Item Charge

0189 El SalvadorA COMAR Net Charge for rust proofing will be added when this code is ordered.

Net Item Charge



Same Price


Same Price


Same Price


Same Price


Same Price


Same Price


Same Price


Same Price

AXLE EXTENSIONS1000 Non-Kernel Processor Axle Extension 119.00

1010 Kernel Processor Axle Extension 235.00


Two-Row Row-Crop Narrow Harvesting UnitContinued



SUGGESTEDLIST PRICE

USD ($)

AXLE EXTENSIONS ...Continued...1095 Less Axle Extensions In Base Price


Frame and Chassis:AE55160 Float Lockout Parts for Row-Crop Heads See Parts

AE38859 Sprocket, Speed Up Drive for Harvesting Unit3940, 3950, 3955, 3960, 3970 or 3975 Harvesters.

See Parts


337.70


See Parts


See Parts


See Parts


See Parts








TWO-ROW NARROW AND TWO-ROWWIDE ROW-CROPS:

Rubber Gathering BeltsPower CornerLow-Profile Stalk GuidesOscillating Knife with

Tungsten Carbide EdgesFloating Gathering Points

Slip ClutchBuilt-In Storage Stand


SUGGESTEDLIST PRICE

USD ($)






6323E Two-Row Row-Crop Wide Harvesting Unit 8,405.00

DESTINATION






Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge




Two-Row Row-Crop Wide Harvesting UnitEquipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)







Net Item Charge


Net Item Charge


Net Item Charge



Same Price


Same Price


Same Price


Same Price


Same Price


Same Price


Same Price


Same Price



1095 Less Axle Extensions In Base Price


Two-Row Row-Crop Wide Harvesting UnitContinued



SUGGESTEDLIST PRICE

USD ($)




See Parts


337.70


See Parts


See Parts


See Parts


See Parts








THREE-ROW NARROW ROW CROPS:Rubber Gathering BeltsPower Corners (LH and RH)Oscillating Knife with

Tungsten Carbide EdgesFloating Gathering PointsBuilt-In Storage StandsMulti-Luber Lubrication

Slip Clutch


SUGGESTEDLIST PRICE

USD ($)





Additional parts required to adapt to a 3955 Pull-Type Forage Harvester; ordered separatelyfrom Parts.1 - AE45173 Filler Panel1 - AE45174 Filler Panel1 - E72721 Panel1 - E70481 ChannelRequired attaching hardware, see Parts.


5356E Three-Row Row-Crop Narrow Harvesting Unit 16,015.00

DESTINATION






Net Item Charge


Net Item Charge




Three-Row Row-Crop Narrow Harvesting UnitEquipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)







Net Item Charge


Net Item Charge


Net Item Charge



Same Price


Same Price


Same Price


Same Price


Same Price


Same Price


Same Price


Same Price



1095 Less Axle Extensions In Base Price


Three-Row Row-Crop Narrow Harvesting UnitContinued



SUGGESTEDLIST PRICE

USD ($)




See Parts


See Parts


See Parts


See Parts


See Parts








Channel-Type StrippersPneumatic Adjustable Gauge WheelsSlip ClutchAdjustable Speed PickupFloating Auger with Retractable

Feeder Fingers

Requires Dealer Conversion.


SUGGESTEDLIST PRICE

USD ($)



For Pull-Type Forage Harvesters

For operation, harvesting units may require attaching frame and adapting bundle to fit 6000Series Self-Propelled Forage Harvesters. See 'Attachments for Field Conversion'.

9' pickup available from RCI Engineering.


0310E 7 Ft. Custom-Duty Windrow Pickup 7,877.00

DESTINATION





0079 JapanA COMAR Net Charge for rust proofing will be added when this code is ordered.

Net Item Charge


Net Item Charge


Net Item Charge


Net Item Charge




7 Ft. Custom-Duty Windrow PickupEquipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)




(Export) South America:0214 Colombia



Net Item Charge


Net Item Charge



Same Price


Same Price


Same Price


Same Price


Same Price


Same Price

ATTACHMENTS - ORDER AS DESIREDThe following 9000 Codes will be shipped with the harvesting unit if required. If orderedwithout a harvesting unit, the bundle number must be ordered from the Ottumwa Factory(EAT).

Frame and Chassis:9004 (Export Only) Hay Pickup Float System


9118 Hay Pickup Float System 1,546.00



7 Ft. Custom-Duty Windrow PickupContinued



SUGGESTEDLIST PRICE

USD ($)




BE24139 Hay Pickup Float System 1,700.60








72" (1829 mm) Cutting Width42 Double Edge, Reversible, Rotor Knives2.5" to 7.2" (64 to 184 mm)

Cutting Height RangeForty PTO HP minimum requiredCutterhead with Three KnivesHitch Adjustment Mechanism for

Transport and OperationDouble Wagon Hitch, for Transport

and Operating PositionsDriveshaft with Overrunning and

Slip Clutches

5.9 - 15 4 PR TiresFan BladesImpellersCast Iron PulleysDischarge SpoutSafety Chain


SUGGESTEDLIST PRICE

USD ($)


BASE MACHINEEX-WORKS Laredo, Texas or Moline, Illinois

0201P 972 Flail Chopper 14,248.00

HITCH1000 Equal Angle Hitch with Powershaft 206.00

1010 Hitch Plates with Powershaft In Base Price


Discharge Spout:9030 Vertical Extension for Discharge Spout 439.00

9040 Wear Sleeve for Discharge Spout (Set of Three) 153.00


Hydraulics:9020 Remote Hydraulic Cylinder Adapter 113.00

9070 Hydraulic Leveling Cylinder 834.00

Knives:9000 Rotating Knives Support (Cutterhead) 175.00

9010 Rotating Knives (Set of Three) 151.00



972 Flail ChopperEquipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)


Discharge Spout:BE21795 Extension, 24 In . Horizontal 127.60

BP17146 Vertical Extension for Discharge Spout 482.90

BP17189 Wear Sleeve for Discharge Spout (Set of Three) 168.30

Hitch:BP17222 Equal Angle Hitch with Powershaft 866.80

BP17223 Hitch Plates with Powershaft 619.30

Hydraulics:BP16261 Hydraulic Leveling Cylinder 964.70

BP17179 Remote Hydraulic Cylinder Adapter 124.30

Knives:BE20567 Rotating Knives (Set of Three) 166.10


972 Flail ChopperContinued



SUGGESTEDLIST PRICE

USD ($)


Bale Ejection:BE24127 Bale Push Bar

467 or 467 Silage models.1,659.90

BE24128 Bale Push Bar567 models.

1,699.50

BE24179 Bale Ramp447 models (SN152340 and above).

1,299.10

BE32285 Bale Ramp 1,446.00

BE24268 Bale Ramp, Hydraulic457/456 models.Requires 2200 PSI tractor hydraulics.456 models (SN142000 and below) or 456 Silage models (SN142500 and below) also requireAuxiliary Belt Take-Up Roll.

1,488.30

BE24269 Bale Ramp, Hydraulic557/556 models.Requires 2200 PSI tractor hydraulics.556 models (SN143000 and below) also require Auxiliary Belt Take-Up Roll.

1,590.60


270.00


For 456, 556, 457, 557, 458, and 558 Models.646.80

BE23827 Variable Core ValveFor 466, 566, 467, 567, 468, 568, 469 and 569 Models.

426.80


E82511 Decal, Warning 1000 RPM435, 535, 467/466, 467/466 Silage or 567/566 models.

See Parts

AE73355 Front Yoke and Lockback Collar, 1-3/4 In. 1000 RPM435, 535, 467/466, 467/466 Silage or 567/566 models.Requires Universal Joint (AE73351) ordered separately from Service Parts.

See Parts

AE74041 Front Yoke and Lockback Collar, 1-3/8 In. 1000 RPM435, 535, 547, 557, 467/466, 467/466 Silage or 567/566 models.Requires Universal Joint (AE73351) ordered separately from Service Parts.

See Parts


Attachments for Non-Current Round Balers



SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...AE54323 Output Shaft, 1000 RPM

430, 530, 435, 535, 467/466, 467/466 Silage or 567/566 models.If a complete PTO shaft (BE31166 or BE31017) is ordered, only a 1000 RPM Output Shaft(AE54323) is required to complete the conversion.

See Parts

AE73352 PTO Driveline, Front Half with Lockback Collar, 1-3/4 In. 1000 RPM467 (SN312601 and above), 467 Silage (SN312101 and above) or 567 (SN314451 and above)models.

See Parts

AE74042 PTO Driveline, Front Half with Lockback Collar, 1-3/8 In. 1000 RPM467 (SN312601 and above), 467 Silage (SN312101 and above) or 567 (SN314451 and above)models.

See Parts

AE74295 PTO Driveline, Front Half with Lockback Collar, 1-3/8 In. 1000 RPM435, 535, 467/466 (SN312600 and below), 467/466 Silage (SN312100 and below) or 567/566(SN314450 and below) models.Requires Plastic Lower Safety Shield (AE73557), ordered separately from Service Parts, tocomplete installation on PTO shafts originally equipped with steel safety shield.

See Parts

E96695 Slip Clutch Disk Spring, 1000 RPM467/466, 467/466 Silage or 567/566 models.

See Parts




AE59637 Front Yoke with Lockback Collar, 540 RPMRequires Universal Joint (AE73351) ordered separately from Service Parts.

See Parts

AE54321 Output Shaft, 540 RPMIf a complete PTO shaft (BE31165) is ordered, only a 540 RPM Output Shaft (AE54321) isrequired to complete the conversion.

See Parts

AE74610 Output Shaft, 540 RPMIf a complete PTO shaft (BE31165) is ordered, only a 540 RPM Output Shaft (AE74610) isrequired to complete the conversion.

See Parts

AE73356 PTO Driveline, Front Half with Lockback Collar, 540 RPMRequires Plastic Lower Safety Shield (AE73557), ordered separately from Service Parts, tocomplete installation on PTO shafts originally equipped with steel safety shield.

See Parts

AE74294 PTO Driveline, Front Half with Lockback Collar, 540 RPMRequires Plastic Lower Safety Shield (AE73557), ordered separately from Service Parts, tocomplete installation on PTO shafts originally equipped with steel safety shield.

See Parts


Drivelines:BE32182 PTO Driveline, 1-3/4 In. 1000 RPM Telescoping Tractor Hookup with

Slip ClutchFor 8 Series Models and Older-435, 535, 466, 466 Silage, 566, 467, 467 Silage, 567, 468, 468Silage, and 568 Models.

1,699.50


Attachments for Non-Current Round BalersContinued



SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BE32186 PTO Driveline, 1-3/8 In. 1000 RPM Telescoping Tractor Hookup with

Slip ClutchFor 8 Series Models and Older-435, 535, 466, 466 Silage, 566, 467, 467 Silage, 567, 468, 468Silage, and 568 Models.

1,537.80


1,537.80


1,934.90

BE32185 PTO Driveline, 540 RPM Telescoping Tractor Hookup with Slip ClutchFor 8 Series Models and Older - 435, 535, 466, 466 Silage, 566, 467, 467Silage, 567, 468, 468Silage and 568 Balers.

1,537.80


1,537.80




See Parts


See Parts


See Parts

Forming Chamber:AE50708 Build--up reduction Kit

Kit attaches to gate to help reduce the amount of crop build up arround the gate areaFor435/535 or 466/466S models.

See Parts

AE54256 Build--up reduction KitKit attaches to gate to help reduce the amount of crop build up arround the gate area - For456/456S models.

See Parts

AE54257 Build--up reduction KitKit attaches to gate to help reduce the amount of crop build up arround the gate area - For556 models.

See Parts

AE50709 Build--up reduction KitKit attaches to gate to help reduce the amount of crop build up arround the gate area - For535 or 566 models.

See Parts

BE31105 Crop Deflector Kit 444.40


779.90


779.90





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BE32101 Side-Sheet Enhancement Kit

For 468, 468 Silage Special, or 568 Round Balers. Replaceable wear liners made fromabrasion resistant steel. Intended for highly abrasive crops such as corn stalks and peanuthay. Includes liners and attaching hardware. Can be used to repair balers with already wornside-sheets.

1,610.40

BE32141 Side-Sheet Enhancement KitFor 467, 467 Silage Special, or 567 Round Balers.Replaceable wear liners made from abrasion resistant steel. Intended for highly abrasivecrops such as corn stalks and peanut hay. Includes liners and attaching hardware. Can beused to repair balers with already worn side-sheets.

1,610.40

BE31183 Silage Special Kit -4' WideIncludes staggered belt roll auger kit and starter roll scraper knife. Recommended for bailingsilage hay and very dry britte crops. For 456, 466, 457, 458 and 468 Models.

1,080.20




310.20

AE57344 Hitch Kit for 2 In. Thick Tractor DrawbarFor adapting baler hitch to 2 In. thick tractor drawbars.

See Parts

BE23622 Rubber Drawbar Shield"6" or "7" Series models.

51.70





See Parts

AE52498 Hydraulic Pressure Reduction Kit for High Flow/High Pressure Tractors435 or 535 Round Balers.

See Parts



AM3118E Bale Counter See Parts





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BE30007 BaleTrak Pro Monitor LESS Mounting Brackets

(Order if Second Monitor is Desired)"7" Series models.1) Connects to Tractor 3-Terminal Convenience Outlet. For tractors not equipped with aConvenience Outlet, order AE50549, 3-Terminal Convenience Outlet Wiring Harness fromParts.2) See Attachments for Field Conversion section to order Mounting Brackets.

1,523.50

A53254 L Mount Bracket"5", "6" or "7" Series models.

See Parts

A54171 Mounting Bracket for Console"5", "6" or "7" Series models.

See Parts

E88560 Mounting Bracket for Monitor/Display/Controller -John Deere Sound-Gard Body Cab Tractors"5", "6" or "7" Series models.

See Parts

BE23599 Mounting Brackets for Monitor/Display Controller -John Deere Sound-Gard Body Cab Tractors"6" or "7" Series models.For mounting BaleTrak Pro, BaleTrak Plus or BaleWatch monitor to John Deere tractors withSound-Gard Body cab.

78.10

BE23864 Mounting Brackets for Monitor/Display/Controller -5000 or 5010 Series Cab Tractor"6" or "7" Series models.For mounting BaleTrak Pro, BaleTrak Plus or BaleWatch Plus monitor to 5000 or 5010 SeriesTractor with Cab.

86.90

BE23863 Mounting Brackets for Monitor/Display/Controller -5000 or 6000 Series OS Tractors"6" or "7" Series models.For mounting Electric Twine Control Module only to 5000 or 6000 Series Operator StationTractor ROPS.Clamps to Roll-Over Protective Structure.





86.90





SUGGESTEDLIST PRICE

USD ($)


5020 Series IOOS Tractors"6" or "7" Series models.For mounting BaleTrak Pro monitor to 5020 Series Isolated Open Operator Station TractorsONLY.

113.30

BE23519 Mounting Brackets for Monitor/Display/Controller -5020, 5025, 6000, 7000, or 8000 Series Cab Tractors"6" or "7" Series models.For mounting BaleTrak Pro, BaleTrak Plus or BaleWatch monitor to 5020, 5025, 6000, 6005,6010, 6015, 6020, 7000, 7010, 7020 or 8000 Series Cab Tractors.

78.10

BE23840 Mounting Brackets for Monitor/Display/Controller -6000 Series OS or 7000 Series Tractor"6" or "7" Series.For mounting BaleTrak Pro monitor to 6000 Series Operator Station Tractors (SN148721 andbelow) or ALL 7000 Series Tractors.

86.90

BE23862 Mounting Brackets for Monitor/Display/Controller -6000, 6010, 6020 Series OS Tractors"6" or "7" Series models.For mounting BaleTrak Pro monitor to 6000, 6010 or 6020 Series Open Operator StationTractors (Standard models SN148722 and above or Low Profile models SN148787 and above).

167.20

BE23963 Mounting Brackets for Monitor/Display/Controller - 6003, 6005, or 7005 Series OS Tractors"6" or "7" Series models.For mounting BaleTrak Pro monitor to 6403, 6603, 6405, 6605 or 7405 Open OperatorStation Tractors.

179.30



TY15133 Fire Extinguisher Mounting BracketRequired for TY15132, TY15815, TY24793 or TY25183.Also order (4) 37M7058 Self-Tapping Screws from Parts.

See Parts


See Parts


"6" or "7" Series models with Regular and MegaTooth Pickup ONLY.1,710.50

BE31145 Pickup Gauge Wheels, Right and Left"6" or "7" Series models.Balers with Regular Pickup ONLY.

605.00

Twine and Surface Wrap:BE24158 Adjustable Twine Guide, Left Side

447/448, 457/458, 457SS/458SS Models141.90

BE24157 Adjustable Twine Guides (Includes Left and Right Hand Twine Guides)547, 557/558, 567/568 Models

191.40





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BE32449 CoverEdge Surface Wrap Bundle

567 models with factory equipped BaleTrak Pro or BaleTrak Plus monitors ONLY.Spanish or French Operator Manual and Decal Kit must be ordered separately.

9,260.90

BE32450 CoverEdge Surface Wrap Bundle467 models with factory equipped BaleTrak Pro or BaleTrak Plus monitors ONLY.Spanish or French Operator Manual and Decal Kit must be ordered separately.

7,775.90


See Parts


7,203.90









SUGGESTEDLIST PRICE

USD ($)


Bale Ejection:BE21497 Bale Chute, Regular

468 Square Balers.125.40

BE21723 Bale Chute, Side Drop with Guide468 Square Balers.

551.10

BE32066 Bale Ejector (Complete), Electric Distance and Hydraulic Tilt ControlsIncluding Cylinder (English Decals)327, 336, or 337 Square Balers. U.S. and Canada Only.

9,792.20

BE32068 Bale Ejector (Complete), Electric Distance and Hydraulic Tilt ControlsIncluding Cylinder (English Decals)346 or 347 Square Balers.

9,792.20

BE32224 Bale Ejector (Complete), Electric Distance and Hydraulic Tilt ControlsIncluding Cylinder (No Text Decals)327, 336, or 337 Square Balers. Export Only.

9,792.20

BE32234 Bale Ejector (Complete), Electric Distance and Hydraulic Tilt ControlsIncluding Cylinder (No Text Decals)346 or 347 Square Balers.

9,792.20

BE32065 Bale Ejector (Complete), Electric Distance and Tilt Controls(English Decals)327, 336, or 337 Square Balers. U.S. and Canada Only.

10,345.50

BE32067 Bale Ejector (Complete), Electric Distance and Tilt Controls(English Decals)346 or 347 Square Balers.

10,345.50

BE32223 Bale Ejector (Complete), Electric Distance and Tilt Controls(No Text Decals)327, 336, or 337 Square Balers. Export Only.

10,345.50

BE32233 Bale Ejector (Complete), Electric Distance and Tilt Controls(No Text Decals)346 or 347 Square Balers.

10,345.50

BE23854 Bale Ejector, Distance Controls with Hydraulic Cylinder Supports327, 336, 337, 346, 347, or 468 Square Balers.Included in BE32066 or BE32068 Bale Ejector (Complete)Requires BE21036 and BE22060 if ordered separately.

662.21

BE23853 Bale Ejector, Distance and Tilt Controls327, 336, 337, 346, 347, or 468 Square Balers.Included in BE32065 or BE32067 Bale Ejector (Complete)To adapt controls to tractor 3-Terminal Convenience Outlet, order AE50531 Harness,Convenience Outlet from Parts.

1,662.10

BE21036 Bale Ejector, Hydraulic Cylinder for Tilt Control42 or 40 Bale Ejectors.327, 336, 337, 346, or 347 Square BalersIncluded in BE32066 or BE32068 Bale Ejector (Complete)

68.20


Attachments for Non-Current Square Balers



SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BE22060 Bale Ejector, Hydraulic Cylinder for Tilt Control

42 or 40 Bale Ejectors.327, 336, 337, 346, or 347 Square BalersIncluded in BE32066 or BE 32068 Bale Ejector (Complete)

378.39

BE21023 Bale Ejector, Wheel Extension - Left Side346 or 347 Square BalersIncluded in BE32065 or BE32066 Bale Ejector (Complete)

373.19

BE21502 Bale Ejector, Wheel Extension - Left Side327, 336, or 337 Square BalersIncluded in BE32065 or BE32066 Bale Ejector (Complete)

373.19

Density Control:BE20120 Side Hay Resistor


Electrical:AE46600 Convenience Outlet (2-Pin)

For tractor with no convenience outlet.See Parts


See Parts


AE50531 Harness, Convenience Outlet See Parts

Frame and Chassis:BE24273 Hydraulic Tongue Positioning Cylinder



BE21895 Wagon Hitch Support327, 336, 337, 346, 347, or 468 Square Balers.Included in BE32065, BE32066, BE32067, or BE32068 Bale Ejector (Complete)

336.30

BE22065 Wagon Hitch, Center Telescoping with Bale Chute Extension468 Square Balers.

748.00

BE22557 Wagon Hitch, Remote Release468 Square Balers.

260.70

Lighting:BE21106 Auxiliary Lights - 12 Volt



Attachments for Non-Current Square BalersContinued



SUGGESTEDLIST PRICE

USD ($)




AM3118E Bale Counter See Parts

AE50718 Control Mounting Kit40 Bale Ejectors.For 6000 Series Tractor with Open Operator Station and Comfort Seat.For 7000 Series Tractor with Open Operator Station.

See Parts

AE50719 Control Mounting Kit40 Bale Ejectors.For 6000 Series Tractor with ComfortGard Cab or Open Operator Station with Super ComfortSeat.

See Parts

A53254 L Mount Bracket40 Bale Ejectors.

See Parts

Pickup:BE24263 Hydraulic Pickup Lift


Twine System:BE21437 Multi-Luber










SUGGESTEDLIST PRICE

USD ($)



945 or 955 models.1) Helps prevent wrapping of lower roll in heavy, viney type crops such as Cali or Star Grass.2) Also requires the following items from Parts for installation:


See Parts


945 or 955 models.Requires separate selective control valve. Three SCVs are required when machine is equippedwith Hydraulic Tilt Control.

675.40

BE32040 Cutting Angle Adjustment, Hydraulic Tilt ControlFor 500 Series models.Requires separate selective control valve. Total of three SCVs are required for operation.

675.40

BE32041 Cutting Angle Adjustment, Hydraulic Tilt ControlFor 700 Series models.Requires separate selective control valve. Total of three SCVs are required for operation.

675.40

AFH200183 Cutting Angle Adjustment, Turnbuckle Top LinkFor 500 Series models.

See Parts

BE23921 Cutting Angle Adjustment, Turnbuckle Top Link945 or 955 models.

281.60

DC200311 Cutting Angle Adjustment, Turnbuckle Top LinkFor 700 Series models.

See Parts

CC104769 Gauge Shoe Extension - Four RequiredFor 500 or 700 Series models.Used to increase maximum cutting height.Also requires the following items from Parts for installation:


See Parts

BE31182 Rotary Stripper BundleFor 500 or 700 Series models.Recommended for improved cutting and windrow performance in tall and/or wet cropconditions.

347.60


AE56235 Front Yoke with Lockback Collar, 1-3/4 In. 1000 RPM945 or 955 models.Requires AC15878, U-Joint Assembly from Parts.

See Parts


Attachments for Non-Current Mower-Conditioners



SUGGESTEDLIST PRICE

USD ($)



AE54916 Front Yoke with Lockback Collar, 1-3/8 In. 1000 RPM945 or 955 models.Requires AC15878, U-Joint Assembly from Parts.

See Parts


for Ball-Joint HitchFor 530 or 535 models.Gearcase must match RPM of tractor hookup.Used to convert standard tongue with 1000 RPM Clevis Hitch.

687.50

BE10058 PTO Driveline, 1-3/8 In. 1000 RPM Telescoping Tractor Hookupfor Clevis HitchFor 530 or 535 models.Gearcase must match RPM of Tractor Hookup.Used to convert standard tongue with 1000 RPM Ball-Joint Hitch and Drawbar Extension.

687.50

BE32031 PTO Driveline, 1-3/8 In. 1000 RPM Telescoping Tractor Hookupfor Swivel HitchFor 530 or 535 models.

600.60

BE10055 PTO Driveline, 540 RPM Telescoping Tractor Hookup for Ball-Joint HitchFor 525 or 530 models.Gearcase must match RPM of tractor hookup.Used to convert standard tongue with 540 RPM Clevis Hitch.

687.50

BE10057 PTO Driveline, 540 RPM Telescoping Tractor Hookup for Clevis HitchFor 525 or 530 models.Gearcase must match RPM of tractor hookup.Used to convert standard tongue with 540 RPM Ball-Joint Hitch and Drawbar Extension.

687.50

BE32034 Rear PTO Driveline, 1000 RPM with Single CV U-JointFor 530 or 535 models.Enables platform to be repositioned, under power, for limited amounts of time.

1,632.40

BE32033 Rear PTO Driveline, 1000 RPM with Standard U-Joints for Standard TongueFor 530 or 535 Side-Pull Mower-Conditioners.

781.00

BE32035 Rear PTO Driveline, 1000 RPM with Standard U-Joints for Swivel TongueFor 530 or 535 models.

781.00

BE32038 Rear PTO Driveline, 540 RPM with Single CV U-JointFor 525 or 530 Side-Pull Mower-Conditioners.Enables platform to be repositioned, under power, for limited amounts of time.

1,948.10

BE32032 Rear PTO Driveline, 540 RPM with Standard U-Joints for Standard TongueFor 525 or 530 models.

1,093.40

BE31142 Universal Driveshaft, 1000 RPM HookupFor 630, 635, 830, 835 Models.For use with 6R tractors that utilize the quick hitch and 2 pt.

768.90


Attachments for Non-Current Mower-ConditionersContinued



SUGGESTEDLIST PRICE

USD ($)





For 500 Series models.Gearcase must match RPM of tractor hookup.Also requires BE10056, 1000 RPM tractor hookup for Ball-Joint Hitch OR BE10055, 540RPM tractor hookup for Ball-Joint Hitch.Used to convert standard tongue with Clevis Hitch.

610.50

BE31153 Clevis HitchFor 500 Series models.Gearcase must match RPM of tractor hookup.Also requires BE10058, 1000 RPM tractor hookup for Clevis Hitch OR BE10057, 540 RPMtractor hookup for Clevis Hitch.Used to convert standard tongue with Ball-Joint Hitch and Drawbar Extension.

213.40

PM03015 Quick Hitch Bushing - Two RequiredFor 500 or 700 Series models.To adapt swivel hitch for use with quik-coupler.

See Parts



BE31086 Turn Limiters, NarrowFor 500 Series models.

196.90

BE31087 Turn Limiters, WideFor 500 Series models.

299.20


Required for TY15132, TY15815, TY24793 or TY25183.Also order (4) 37M7058 Self-Tapping Screws from Parts.

See Parts


See Parts









SUGGESTEDLIST PRICE

USD ($)


Cab and Controls:BH71948 Large Windshield Wiper (3 Blades)

4895/4890 or 4995/4990 models.Order from JD Harvester Works.

676.00


990 Rotary Platforms.Must order with E94820.

See Parts

E94820 1000 rpm Impeller Conditioner Parts990 Rotary Platforms.Must order with E94819.

See Parts

E125066 1000 rpm Roll Conditioner Parts990 Rotary Platforms.Must order with E98362.

See Parts

E98362 1000 rpm Roll Conditioner Parts990 Rotary Platforms.Must order with E125066.

See Parts

Frame and Chassis:BE31003 Auger Platform Attaching Bundle

NOT compatible with R450 Windrower.Required to attach 890/895/896 Auger Platform to 4995/4990 Traction Unit.Also requires BE24183, Auger Platform Forming Shields for all platforms except grass seedspecials.

1,441.00

BE24183 Auger Platform Forming ShieldsNOT compatible with R450 Windrower.Required for windrow formation when attaching 890/895/896 Auger Platform to 4995/4990Traction Unit.Also requires BE31003, Auger Platform Attaching Bundle.

1,508.10


BE31134 Rear Air Screen Cover4895/4890 or 4995/4990 models.

932.80

AT22070 Tool Box4895/4890 or 4995/4990 models.To mount Tool Box on outside of frame rail, also order from PARTS the following:- (1) T23033, Mounting Bracket- (1) T23027, Pin- (2) 14H1039, Nut- (4) 24H1376, Washers- (2) 19H1833, Capscrew

Also order AT22073, Toolbox Tray from PARTS if desired.

See Parts


Attachments for Non-Current Self-Propelled Windrowers



SUGGESTEDLIST PRICE

USD ($)


Lighting:BE23867 Additional Lighting Kit

4895 or 4995 models.Includes four lights: two lights at rear of cab and two frame rail lights.

540.10

BH84202 FieldVision Xenon HID Lighting Package4895 or 4995 models SN320000 and below.Order from JD Harvester Works.

2,039.40

BH84482 FieldVision Xenon HID Lighting Package4895 or 4995 models SN320001 and above.Order from JD Harvester Works.

1,854.00

BH84557 FieldVision Xenon HID Lighting Package4895 or 4995 models SN320001 and above.Order from JD Harvester Works.

962.50


Attachments for Non-Current Self-Propelled WindrowersContinued



SUGGESTEDLIST PRICE

USD ($)


Auto Lube System:BZ13798 Auto Lube System - Kernel Processor

For 7050 or 7000 Series Harvesters.Requires field installed kernel processor AND base machine auto lube system.

1,172.60

AutoTrac Integrated Machine Kits:BZ100194 SPFH Guidance Base Kit - 7000, 7050 and 7080 Series 6,897.00

BZ100196 SPFH SSU Controller - 7000, 7050 and 7080 SeriesRequired for machines serial number 0510448 and above.

847.00



Z12219 Blower Sheave, 2000 RPMFor 6010 Series Harvesters.1) Will assist in gummy alfalfa conditions.2) Not recommended for corn.3) If powered chute or kernel processor is installed, an additional sheave and belt will benecessary to slow down the RPM on these units.

See Parts

Z13078 Blower Sheave, 2000 RPM at 1000 RPM Cutterhead SpeedFor 7200-7400 or 6050 Series Harvesters.1) For compatibility, refer to the Cutterhead and Blower Sheave Chart in Agricultural SalesManual.2) Will assist in gummy alfalfa conditions.3) Not recommended for corn.4) If powered chute or kernel processor is installed, an additional sheave and belt will benecessary to slow down the RPM on these units.

See Parts

Z13077 Blower Sheave, 2000 RPM at 1150 RPM Cutterhead SpeedFor 7200-7500 or 6050 Series Harvesters.1) 7200-7400 Harvesters require 1150 RPM Cutterhead Conversion (BZ13111).2) For compatibility, refer to the Cutterhead and Blower Sheave Chart in Agricultural SalesManual.3) Will assist in gummy alfalfa conditions.4) Not recommended for corn.5) If powered chute or kernel processor is installed, an additional sheave and belt will benecessary to slow down the RPM on these units.

See Parts


1) For 7200-7500 Harvesters.2) Increases crop flow efficiency in gummy alfalfa conditions.3) Not intended to provide increased wear life of crop chute.

See Parts

Z78792 Stainless Steel Liner for Standard All Crop Curved Chute1) For 7850 or 7700-7800 Harvesters.2) Increases crop flow efficiency in gummy alfalfa conditions.3) Not intended to provide increased wear life of crop chute.

See Parts


Attachments for Non-Current Self-Propelled Forage Equipment



SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BZ13746 Standard All Crop Curved Chute

For 7200-7500 Harvesters.722.70

BZ13748 Standard All Crop Curved ChuteFor 7850 or 7700-7800 Harvesters.

858.00

Z81884 Wear Resistant Liner for Standard All Crop Curved ChuteFor 7200-7500 Harvesters.

See Parts

Z81885 Wear Resistant Liner for Standard All Crop Curved ChuteFor 7850 or 7700-7800 Harvesters.

See Parts



2,384.00

BZ13724 Drive Adapting Parts for 600 Series Combine Header EquipmentFor 7850 or 7000 Series Harvesters.Required to attach 600 Series Draper Platforms and Corn Heads.Includes driveshaft, hydraulic multi-coupler and relating plumbing, and mounting brackets.

2,241.80


1,126.00


2,966.00


1,255.00

BZ13401 Ear Corn Cross DriveFor 6050 Series Harvesters.Required to drive a combine corn head (RH side).

For Ear Corn Harvesting Option:1) For model year 1997-2002 6000 Series SPFH models with 23 spline gearboxes.2) Required to drive RH side of ALL combine corn heads.3) Requires the following to complete installation of model year 2000 and newer combine cornhead:





10,303.70


Attachments for Non-Current Self-Propelled Forage EquipmentContinued



SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BZ100216 Ear Corn Cross Drive

For 7200-7500 Harvesters.1) Required to drive RH side of ALL combine corn heads.2) Requires the following to complete installation of model year 2000 and newer combine cornhead:





9,725.10

BZ100217 Ear Corn Cross DriveFor 7850 or 7700-7800 Harvesters.1) Required to drive RH side of ALL combine corn heads.2) Requires the following to complete installation of model year 2000 and newer combine cornhead:





9,366.50

AZ46671 Slip ClutchFor 7850 or 7000 Series Harvesters.Required to drive RH side of model year 1999 and older combine corn heads.

See Parts

AZ59204 Telescoping Driveshaft for Combine Corn HeadsFor 7850 or 7000 Series Harvesters.Required to drive LH side of model year 2000 and newer combine corn heads.

See Parts

AZ56630 Wiring HarnessFor 7850 or 7000 Series Harvesters.Required to complete installation of model year 1999 and older combine corn heads.

See Parts

AZ56631 Wiring HarnessFor 7850 or 7000 Series Harvesters.Required to complete installation of model year 2000 and newer combine corn heads.

See Parts



BZ13629 Recirculation Screen Installation PartsFor 7200-7500 Harvesters.1) NOT compatible with spiral cutterhead band.2) Requires conversion to concentric cutterhead band.3) See Agricultural Sales Manual for more information on recirculation screens.

863.50


For 7850 Harvesters.Allows operator to pre-set up to 8 Spout positions, including height, rotation, and cap position.Also features return to transport position.

1,263.90





SUGGESTEDLIST PRICE

USD ($)


1) For SN509964 (Model Year 2009) 7850 Harvesters with High Arch Spout ONLY (Code5804 or BZ100202). Installation on older harvesters will likely result in spout structuralfailure unless ALSO upgraded with BZ100202 High Arch Spout.2) Recommended when side loading into open top wagon or truck in applications with 10-rowharvesting units.3) BZ13730, Second Working Light for Discharge Spout recommended, ordered separately.

1,530.10

AZ101239 Extension, Flat SpoutFor 7850 or 7000 Series Harvesters.1) Converts BZ100013 Short Spout to long spout; recommended for loading towed wagons.2) Order rod for spout cap control separately through Parts.3) Engine exhaust extension recommended when loading towed wagons.

See Parts

BZ100238 Extension, High Arch SpoutFor 7850, 7000 Series or 6050 Series Harvesters.1) For High Arch Spout ONLY.2) Recommended when side loading into open top wagon or truck in applications with wideharvesting units.3) BZ13730, Second Working Light for Discharge Spout recommended, ordered separately.

788.70

BZ13541 Spout Rotation, Two-SpeedFor 7000 Series Harvesters.Provides faster rotation speed when moving discharge spout side to side while harvesting.

944.90


944.90

BZ100202 Spout, High ArchFor 7850 or 7000 Series Harvesters.Recommended when side loading into open top wagons or trucks.

5,875.10

BZ100014 Spout, Long FlatFor 7850 or 7000 Series Harvesters.1) Recommended when loading into towed wagons.2) Engine exhaust extension recommended when loading towed wagons.

5,176.00

BZ100013 Spout, Short FlatFor 7850 or 7000 Series Harvesters.Recommended when side loading into covered wagons or trucks.

4,487.00


For 7850 or 7000 Series Harvesters.1) Required for 120 In. tread spacing with 650/75R32 or 800/65R32 drive tires.2) Requires upgrade to heavy-duty final drives.3) Requires the following ordered separately through Parts:

- (2) AZ101235 Heavy-Duty Final Drives- (1) Z78685 RH Drive Shaft (504 mm- (1) Z78684 LH Drive Shaft (560 mm)- (1) Z78681 Axle Truss Rod (2070 mm)

See Parts

AZ101235 Final Drive, Heavy-Duty Final Drive AssemblyFor 7850 or 7000 Series Harvesters.1) Required for 120 In. tread spacing with 650/75R32 or 800/65R32 drive tires.(2) Requires the following ordered separately through Parts:

- (2) Z13329 Final Drive Spacers- (2) Z78681 Axle Truss Rod (2070 mm)- (1) Z78685 RH Drive Shaft (504 mm- (1) Z78684 LH Drive Shaft (560 mm)

See Parts





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...Z79041 Wheel Spacer, Heavy-Duty Final Drive - 28 mm (1.1 In.)

For 7850 or 7000 Series Harvesters.See Parts

Z79040 Wheel Spacer, Standard Final Drive - 28 mm (1.1 In.)For 7850 or 7000 Series Harvesters.

See Parts



704.00

AZ57535 Front End Drive Shaft with 1400 Nm (1032 Ft. Lb.) Slip Clutch See Parts

BZ100236 Reinforcement for Harvester Frame in Large Harvesting Unit Application1) Required for 7400-7500 Harvesters equipped with 678, 778, 698, 690, 710, 770 or 692Harvesting Units; UNLESS Harvester originally ordered with code 6074 Reinforcement.2) Rear Weight Bracket (AZ54483), Weight Plates (Z48791), and Weights (R51680), orderedseparately, required for proper ballasting.3) See 678, 710, or 770 Harvesting Unit for additional Harvester requirements.

2,401.30


1) Required for all approved 6010 Series or 6050 Series Harvesters to fold 676, 686, 678, 688,710, or 770 Harvesting Units or optional hydraulically folded gauge wheels on 630C, 640C, or645C hay pickups..2) Can be used to MANUALLY raise SPFH cutterhead compressor sheet.3) See harvesting units for Harvester requirements.

1,240.80

BZ13544 Double Acting Hydraulic Outlet1) Required for all approved 7000 Series Harvesters to fold 676, 686, 678, 688, 710harvesting units.2) NOT compatible with 7050 Series Harvesters.3) BZ13549, Single Acting Hydraulic Outlet, STILL required to enable hay pickup harvestingunit feature that AUTOMATICALLY raises compressor sheet when cutterhead feedrolls stop.4) Can be used instead of BZ13549, Single Acting Hydraulic Outlet, to MANUALLY raise haypickup harvesting unit compressor sheet.5) See harvesting units for Harvester requirements.

1,280.40

BZ100176 Double Acting Hydraulic OutletFor 7850 Harvesters.1) Required to fold 676, 686, 678, 688, 710, or 770 harvesting units or optional hydraulicallyfolded gauge wheels on 630C, 640C, or 645C hay pickups.2) Code 6020 or BZ100175 Single Acting Hydraulic Outlet STILL required to enable haypickup harvesting unit feature that AUTOMATICALLY raises compressor sheet whencutterhead feedrolls stop.3) Can be used in lieu of Code 6020 or BZ100175 Single Acting Hydraulic Outlet toMANUALLY raise compressor sheet.4) See harvesting units for Harvester requirements.

774.40





SUGGESTEDLIST PRICE

USD ($)


For 7850 Harvesters NOT equipped with Advanced Header Height Control, Code 3610, orALL 7000 Series Harvesters.1) Maximum Flow- 22 GPM for harvesters equipped with 3 Speed Manual-Shift Transmission.- 20 GPM for harvesters equipped with ProDrive Transmission.2) Recommended for dumping wagons.3) NOT compatible with Advanced Header Height Control, INSTEAD order field installedBZ100203 High Flow Rear Hydraulic Outlet.4) NOT compatible with field installed BZ100203 High Flow Rear Hydraulic Outlet.5) Requires aftermarket hydraulic tank bundle ordered separately from RCI Engineering LLC;reference RC042078. See Allied Supplier Information in Attachments - Ordered as Desiredsection for more information.

4,978.60

BZ100203 High Flow Rear Hydraulic OutletFor Harvesters equipped with Advanced Header Height Control, Code 3610.1) Maximum flow 20 GPM.2) Recommended for dumping wagons.3) NOT compatible with factory installed:- High Flow Rear Hydraulic Outlet, Code 6026.- Standard Flow Rear Hydraulic Outlet, Code 6022.- LESS Advance Header Height Control, Code 3600.4) Requires aftermarket hydraulic tank bundle ordered separately from RCI Engineering LLC;reference RC042078. See Allied Supplier Information in Attachments - Ordered as Desiredsection for more information.

4,526.00

BZ13119 Hydraulic Outlet for Trailer DumpFor 6050 Series Harvesters.

1,784.20

BZ12863 Semi-Automatic Wagon Hitch for 6000 and 7000 Series 686.40

BZ13549 Single Acting Hydraulic OutletFor 7000 Series Harvesters.Required to enable hay pickup harvesting unit feature that AUTOMATICALLYraises compressor sheet when cutterhead feedrolls stop.

1,050.50

BZ13545 Standard Flow Rear Hydraulic OutletFor 7000 Series Harvesters.Maximum flow- 9 GPM for harvesters equipped with 3 Speed Manual-Shift Transmission.- 7 GPM for harvesters equipped with ProDrive Transmission.

1,806.20

BZ100174 Standard Flow Rear Hydraulic OutletFor 7850 Harvesters.Maximum Flow- 9 GPM for harvesters equipped with 3 Speed Manul-Shift Transmission, Code 2003.- 7 GPM for harvesters equipped with ProDrive Transmission, Code 2040.NOT compatible with Advanced Header Height Control, Harvester Code 3610.

1,411.30


For 7850 or 7000 Series Harvesters.Required to complete field installation of kernel processor on machines NOT equipped withfactory installed Code 6054, Drive and Hydraulic Parts for Kernel Processor.

1,987.70

BZ13526 Drive Parts - Common Drive Parts, Kernel ProcessorFor 7000 Series Harvesters.Required to complete field installation of kernel processor on machines NOT equipped withfactory installed Code 6054, Drive and Hydraulic Parts for Kernel Processor.

1,100.00





SUGGESTEDLIST PRICE

USD ($)


For 7850 or 7700-7800 Harvesters.1) For machines with base equipment 1600 RPM blower speed.2) Required to complete field installation of kernel processor REGARDLESS of whethermachine is equipped with factory installed Code 6054, Drive and Hydraulic Parts for KernelProcessor.3) See notes under kernel processor for other kits required to complete kernel processor fieldinstallation on machine NOT equipped with factory installed Code 6054, Drive and HydraulicParts for Kernel Processor.

418.00

BZ13785 Drive Parts - Machines with 1800 RPM Blower SpeedFor 7200-7500 Harvesters.1) For machines with base equipment 1800 RPM blower speed.2) Required to complete field installation of kernel processor REGARDLESS of whethermachine is equipped with factory installed Code 6054, Drive and Hydraulic Parts for KernelProcessor.3) See notes under kernel processor for other kits required to complete kernel processor fieldinstallation on machine NOT equipped with factory installed Code 6054, Drive and HydraulicParts for Kernel Processor.

418.00


2,063.60

BZ13555 Hydraulic Parts, Kernel ProcessorFor 7200-7300 Harvesters.1) Valve for hydraulic belt tensioner.2) Required to complete field installation of kernel processor on machines NOT equipped withfactory installed Code 6054, Drive and Hydraulic Parts for Kernel Processor.

620.40

BZ13556 Hydraulic Parts, Kernel ProcessorFor 7400-7800 Harvesters.1) Valve for hydraulic belt tensioner.2) Required to complete field installation of kernel processor on machines NOT equipped withfactory installed Code 6054, Drive and Hydraulic Parts for Kernel Processor.

448.80

BZ13125 Kernel Processor (Quick Change), Sawtooth Rolls (107 Teeth) with Manually AdjustableRoll ClearanceFor 6050 Series Harvesters.1) Requires kernel processor standard adapting cover to harvest grass or alfalfa crops withkernel processor in RAISED position. See Parts.2) Not for use in grass or alfalfa crops.

20,245.00





SUGGESTEDLIST PRICE

USD ($)


ClearanceFor 7200-7500 Harvesters.1) Standard Sawtooth (107T) Kernel Processor Rolls.2) Requires the following to complete kernel processor field installation on harvestersEQUIPPED with factory installed Code 6054, Drive and Hydraulic Parts for KernelProcessor:

- BZ160162 Kernel Processor Rails.- BZ13785 Kernel Processor Drive Parts for harvesters with 1800 RPM blower speed.

3) Requires the following to complete kernel processor field installation on harvesters NOTequipped with factory installed Code 6054, Drive and Hydraulic Parts for Kernel Processor:

- BZ13526 Kernel Processor Common Drive Parts.- BZ160162 Kernel Processor Rails.- BZ13785 Kernel Processor Drive Parts for harvesters with 1800 RPM blower speed.- BZ13555 or BZ13556 Kernel Processor Hydraulic Partsas appropriate for harvester model.

- BZ13668 Electrically DrivenKernel Processor Chain Hoist.

4) Requires AZ57329 or AZ63827 Kernel Processor Standard or Stainless Steel AdaptingCovers to harvest grass or alfalfa crops with kernel processor in RAISED position. See Parts.5) Not for use in grass or alfalfa.6) Drive belts NOT included. See Parts if required.

20,750.40

BZ100161 Kernel Processor (Quick Change), Standard Sawtooth Rolls with Manually Adjustable RollClearanceFor 7850 or 7700-7800 Harvesters.1) Standard Sawtooth (118T) Kernel Processor Rolls.2) Requires the following to complete kernel processor field installation on harvestersEQUIPPED with factory installed Code 6054, Drive and Hydraulic Parts for KernelProcessor:

- BZ160162 Kernel Processor Rails.- BZ13789 Kernel Processor Drive Parts for harvesters with 1600 RPM blower speed.

3) Requires the following to complete kernel processor field installation on harvesters NOTequipped with factory installed Code 6054, Drive and Hydraulic Parts for Kernel Processor:

- BZ13526 Kernel Processor Common Drive Parts.- BZ160162 Kernel Processor Rails.- BZ13789 Kernel Processor Drive Parts for harvesters with 1600 RPM blower speed.- BZ13556 Kernel Processor Hydraulic Parts.- BZ13668 Electrically DrivenKernel Processor Chain Hoist.

4) Requires AZ61628 or AZ63979 Kernel Processor Standard or Stainless Steel AdaptingCovers to harvest grass or alfalfa crops with kernel processor in RAISED position. See Parts.5) Not for use in grass or alfalfa.6) Drive belts NOT included. See Parts if required.

22,673.20

BZ100162 Kernel Processor RailsFor 7850 or 7000 Series Harvesters.1) Requires BZ100160 or BZ100161, Kernel Processor.2) Requires Drive and Hydraulic Parts for Kernel Processor to complete field installation. Seenotes with BZ100160 or BZ100161, Kernel Processor, for additional information.

1,043.90


1,420.10

BZ100186 Roll Bearings, Labyrinth Sealing Upgrade Kit1) For use with:

- 7200-7500 (SN508668 or BELOW) Harvesters ONLY ordered with factory installed kernelprocessors.

- Field installed kernel processors (SN7997 or BELOW) on 7200-7500 Harvesters.2) ROLLS NOT INCLUDED. Requires AZ101800 Sawtooth, AZ102633 Whole Plant, orAZ101376 Chromed Wear Resistant Sawtooth Kernel Processor Rolls ordered separately fromParts.

2,162.60





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BZ100187 Roll Bearings, Labyrinth Sealing Upgrade Kit

1) For use with:- 7700-7800 Harvesters ONLY (SN508668 or BELOW) ordered with factory installed kernel

processors.- Field installed kernel processors (SN7997 or BELOW) on 7700-7800 Harvesters ONLY.

2) ROLLS NOT INCLUDED. Requires AZ102632 Standard, AZ102602 Sawtooth, orAZ101377 Chromed Wear Resistant Sawtooth Kernel Processor Rolls ordered separately fromParts.

2,162.60

AZ101376 Roll, (107T) Chromed Wear Resistant SawtoothFor 7200-7500, 6050 Series or 6010 Series Harvesters.

See Parts

AZ101800 Roll, (107T) SawtoothFor 7200-7500, 6050 Series or 6010 Series Harvesters.

See Parts

AZ101377 Roll, (118T) Chromed Wear Resistant SawtoothFor 7850 or 7700-7800 Harvesters.

See Parts

AZ102602 Roll, (118T) SawtoothFor 7850 or 7700-7800 Harvesters.

See Parts

AZ102632 Roll, (118T) StandardFor 7850 or 7700-7800 Harvesters.

See Parts

AZ102633 Roll, Whole PlantFor 7200-7500, 6050 Series or 6010 Series Harvesters.

See Parts

AZ54513 Rolls, (214T Milo) Kernel ProcessorFor 7200-7500 Harvesters.1) Recommended for processing milo/grain sorghum crops.2) NOT recommended in corn. Small flutes will plug and become ineffective.

See Parts

AZ63827 Top Chute-KP Quick Raise, Stainless SteelFor 7200-7500 Harvesters.Required to harvest grass or alfalfa crops with kernel processor in RAISED position.

See Parts

AZ63979 Top Chute-KP Quick Raise, Stainless SteelFor 7850 or 7700-7800 Harvesters.Required to harvest grass or alfalfa crops with kernel processor in RAISED position.

See Parts

AZ57329 Top Chute-KP Quick Raise, StandardFor 7200-7500 Harvesters.1) Required to harvest grass or alfalfa crops with kernel processor in RAISED position.2) Included with BZ13746, Standard All Crop Curved Chute.

See Parts

AZ61628 Top Chute-KP Quick Raise, StandardFor 7850 or 7700-7800 Harvesters.1) Required to harvest grass or alfalfa crops with kernel processor in RAISED position.2) Included with BZ13748, Standard All Crop Curved Chute.

See Parts

Lighting:BZ13730 Work Light for Discharge Spout - (1) Additional

For 7000 Series Harvesters.300.30





SUGGESTEDLIST PRICE

USD ($)



For 7850 or 7000 Series Harvesters.1) Recommended if aftermarket inoculant or water tank is installed.2) Equips machine with armrest control and wiring to tank.

171.60

RE190139 John Deere/Delco AM/FM Weatherband RadioFor 7850 or 7000 Series Harvesters.Requires AH211698, Radio Adapter Harness, to complete field installation.

See Parts

AH211698 Radio Adapter HarnessFor 7850 or 7000 Series Harvesters.Required to complete radio field installations.

See Parts

SWVOSMK2 SPFH Camera SystemFor 7850 or 7000 Series Harvesters.1) Required bundles: Spout Bracket (SWZ101225) and Two Camera Capable Wiring Harness(SWVOSBHC2) be purchased separately to mount camera kit on Self-Propelled ForageHarvesters.2) Obtain installation instructions from DTAC solution: 67346.3) Embedded video system includes an in-cab color LCD display, one camera for spoutdischarge control, and a second camera for rear drive and hitch control.

See Parts

SWZ101225 SPFH Spout Bracket for Mounting CameraFor 7850 or 7000 Series Harvesters.Required to mount SPFH Camera System on SPFH.

See Parts

Row-Trak:BZ100193 Row-Trak 2 Controller for 7000 Series 3-Speed with 6.5t Dana axle 5,146.90

BZ100195 Row-Trak 2 Controller for 7000 or 7050 SeriesRequired for machines serial number 0510448 and below.

2,081.20

BZ100011 Row-Trak Controller for 7000 Series SPFH with 4WD 5,496.70

BZ100010 Row-Trak Controller for 7000 Series SPFH without 4WD 5,832.20





SUGGESTEDLIST PRICE

USD ($)


Feeding Enhancements:LCA93949 Deck Sheets

1) For 640A or 640B Hay Pickups.2) Install under feed auger to improve crop funneling and to allow for increased harvestingspeed.3) Deck Sheets are standard equipment on Model Year 2008 640B Windrow Pickups.

See Parts

LCA94923 Deck Sheets1) For 630A or 630B Hay Pickups.2) Install under feed auger to improve crop funneling and to allow for increased harvestingspeed.3) Deck Sheets are standard equipment on Model Year 2007 and later 630B Windrow Pickups.

See Parts

LCA100631 Deck Sheets1) For 645A or 645B Hay Pickups.2) Install under feed auger to improve crop funneling and to allow for increased harvestingspeed.3) Deck Sheets are standard equipment on Model Year 2008 645B Windrow Pickups.

See Parts

DC204979 Trash Net1) For 640, 640B, 640C Hay Pickups.2) Requires pickup compressor sheet.3) Requires (1) LCA94924, Mounting Kit, ordered separately from Parts to completeinstallation.

See Parts

DC204980 Trash Net1) For 645A, 645B, 645C Hay Pickups.2) Requires pickup compressor sheet.3) Requires (1) LCA94924, Mounting Kit, ordered separately from Parts to completeinstallation.

See Parts

DC204978 Trash Net1) For 630A, 630B, 630C Hay Pickups.2) Requires pickup compressor sheet.3) Requires (1) LCA94924, Mounting Kit, ordered separately from Parts to completeinstallation.

See Parts


Required for 7450-7550 or 7400-7500 Harvesters equipped with 678, 710, 690 HarvestingUnits; UNLESS Harvester originally ordered with Code 6074 Reinforcement.

2,401.30


Attachments for Non-Current SPFH Harvesting Units



Attachments for Non-Current SPFH Harvesting UnitsContinued




SUGGESTEDLIST PRICE

USD ($)


Cutterhead:AE37435 Lower Feed Roll Pan

3940, 3950, 3960 or 3970 Harvesters.See Parts

AE37439 Lower Feed Roll Pan3940, 3950, 3960 or 3970 Harvesters.

See Parts

E69877 Upper Feed Roll Fillers for Machines WITH IntelliGuardMetal Detector3950 or 3970 Harvesters.

See Parts

E62946 Upper Feed Roll Fillers for Machines WITHOUT IntelliGuardMetal Detector3940, 3950, 3960 or 3970 Harvesters.

See Parts

E62945 Upper Feed Roll Fillers for Machines WITHOUT Iron-GardMetal Detector3940, 3950, 3960 or 3970 Harvesters.

See Parts

E69878 Upper Feed Roll Fillers for machines WITH Iron-GardMetal Detector3950 or 3970 Harvesters.

See Parts

Discharge Spout:BE21792 Extension, 10 In. Vertical

3950 or 3970 Harvesters.432.30

BE21793 Extension, 20 In. Vertical3950 or 3970 Harvesters.

497.20

BE21795 Extension, 24 In . Horizontal3950 or 3970 Harvesters.

127.60

BE21794 Extension, 40 In. Vertical3950 or 3970 Harvesters.

565.40

BE21796 Extension, 54 In. Horizontal3950 or 3970 Harvesters.

547.80




See Parts


AE50531 Harness, Convenience Outlet See Parts


Attachments for Non-Current Pull-Type Forage Equipment



SUGGESTEDLIST PRICE

USD ($)


Frame and Chassis:BE24225 Cantilever Cross Auger

3950 or 3970 Harvesters.For use with longer cut materials, particularly in grassy crops. Recommended when using lessthan standard number of knives with long length of cut.

1,342.00

AE55160 Float Lockout Parts for Row-Crop Heads3950 and 3970 Harvesters.

See Parts


See Parts

BE24137 Tongue, Long3950 or 3970 Harvesters.Compatible with all Harvesting Units. REQUIRED for 3-Row Row-Crop.

2,884.20

BE24136 Tongue, Short3950 or 3970 Harvesters.Compatible with all Harvesting Units EXCEPT 3-Row Row-Crop.

2,451.90


See Parts


See Parts


See Parts


See Parts


BE21559 Wagon Disconnect, Rope Controlled3950 or 3970 Harvesters.

262.90



Kernel Processor:E82575 Decal, Warning (French)

3970 Harvesters.For field conversions, order decals from Parts.

See Parts

E82508 Decal, Warning (Spanish)3970 Harvesters.For field conversions, order decals from Parts.

See Parts


Attachments for Non-Current Pull-Type Forage EquipmentContinued



SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BE30003 Kernel Processor

3970 Harvesters.For any machine configuration, a minimum of at least a 6 In. right-hand wheel extension isrequired. AE37288, 6 In. wheel extension, is available through Parts.

15,476.51

Operator Environment:E125780 Decal, Operating (French)

For field conversions, order decals from Parts. Requires three.See Parts

E125781 Decal, Operating (Spanish)For field conversions, order decals from Parts. Requires three.

See Parts








Documents

AGRICULTURAL PRODUCTS JOHN DEERE HAY … · English and Spanish operator manual and bilingual decals. ... For 6000, 7000, and 8000 Series Tractors. 154.00 ... AGRICULTURAL PRODUCTS