2
Cooperative Extension Service | Agriculture and Natural Resources | Family and Consumer Sciences | 4-H Youth Development | Community and Economic Development University of Kentucky College of Agriculture, Food and Environment Cooperative Extension Service Pearl Millet By Chris Teutsch, Ray Smith, Tom Keene, and Jimmy C. Henning, Plant and Soil Sciences AGR-231 T he primary benefits of pearl millet are that it does not contain prussic acid and is not susceptible to the sugar- cane aphid. Dwarf varieties are available, which are leafier and better suited for grazing. Pearl millet is better adapted to slightly acidic soils and soils with a lower water holding capacity than sorghum, sudangrass or sorghum-sudangrass hy- brids. For more information on soil types see AGR-217: Determining Soil Texture by Feel. A pH of 5.5 to 6.5 is required for maximum production. Phosphorus and potassium should be applied according to soil test. For more details on fertilizing warm season forages like pearl millet, see AGR-1: Lime and Nutrient Recommenda- tions. In the absence of a soil test, apply 60 to 80 lb/A of P 2 O 5 and 70 to 100 lb/A K 2 O prior to seeding. Apply 60 to 80 lb/A of actual nitrogen at seeding and 40 to 60 lb after each cutting or intensive grazing if regrowth is desired. Do not apply nitro- gen at the onset of drought conditions. `Pearl millet should be planted after there is no chance of frost when the soil tem- perature has reached at least 65 º F. Pearl millet is more sensitive to cold stress than sorghum and may be killed by low tem- peratures in early spring when sorghum is not. It can be either conventionally or no-till seeded. Seed can be broadcast at rate of 25 to 30 lb/A onto a fine, but firm seedbed and then cultipacked to ensure good soil-seed contact. When seeding using a grain drill, reduce seeding rate to 15 to 20 lb/A. Seeding depth should be between ½ and 1 inch. Seeding depths greater than 1 inch should be avoided. Pearl millet grows rapidly and will provide grazing in as little as 45 to 60 days. Unlike Sorghum species, there is no concern with prussic acid poisoning, so grazing can begin when plants reach a height of 18 inches. To avoid nitrate poi- Figure 1. Pearl millet in head stage. soning do not apply excessive amounts of nitrogen fertilizer. Do not graze drought stressed or slow growing plants. For more information on nitrates see ID-217: Forage-related Cattle Disorders—Nitrate Poisoning. If regrowth is desired, do not graze shorter than 6 to 10 inches. Regrowth should be managed in the same manner. Pearl millet can be cut for hay, ensiled, or used for green-chop. Cut for hay or wilted silage once stands reach 30 to 40 inches.

AGR-231: Pearl Millet - University of Kentucky · 2020. 8. 26. · he primary benefits of pearl millet are that it does not contain prussic acid and is not susceptible to the sugar-cane

  • Upload
    others

  • View
    1

  • Download
    0

Embed Size (px)

Citation preview

  • Cooperative Extension Service | Agriculture and Natural Resources | Family and Consumer Sciences | 4-H Youth Development | Community and Economic Development

    University of KentuckyCollege of Agriculture,Food and EnvironmentCooperative Extension ServicePearl Millet

    By Chris Teutsch, Ray Smith, Tom Keene, and Jimmy C. Henning, Plant and Soil Sciences

    AGR-231

    The primary benefits of pearl millet are that it does not contain prussic acid and is not susceptible to the sugar-cane aphid. Dwarf varieties are available, which are leafier and better suited for grazing. Pearl millet is better adapted to slightly acidic soils and soils with a lower water holding capacity than sorghum, sudangrass or sorghum-sudangrass hy-brids. For more information on soil types see AGR-217: Determining Soil Texture by Feel. A pH of 5.5 to 6.5 is required for maximum production. Phosphorus and potassium should be applied according to soil test. For more details on fertilizing warm season forages like pearl millet, see AGR-1: Lime and Nutrient Recommenda-tions. In the absence of a soil test, apply 60 to 80 lb/A of P2O5 and 70 to 100 lb/A K2O prior to seeding. Apply 60 to 80 lb/A of actual nitrogen at seeding and 40 to 60 lb after each cutting or intensive grazing if regrowth is desired. Do not apply nitro-gen at the onset of drought conditions.`Pearl millet should be planted after there is no chance of frost when the soil tem-perature has reached at least 65ºF. Pearl millet is more sensitive to cold stress than sorghum and may be killed by low tem-peratures in early spring when sorghum is not. It can be either conventionally or no-till seeded. Seed can be broadcast at rate of 25 to 30 lb/A onto a fine, but firm seedbed and then cultipacked to ensure good soil-seed contact. When seeding using a grain drill, reduce seeding rate to 15 to 20 lb/A. Seeding depth should be between ½ and 1 inch. Seeding depths greater than 1 inch should be avoided. Pearl millet grows rapidly and will provide grazing in as little as 45 to 60 days. Unlike Sorghum species, there is no concern with prussic acid poisoning, so grazing can begin when plants reach a height of 18 inches. To avoid nitrate poi- Figure 1. Pearl millet in head stage.

    soning do not apply excessive amounts of nitrogen fertilizer. Do not graze drought stressed or slow growing plants. For more information on nitrates see ID-217: Forage-related Cattle Disorders—Nitrate Poisoning.

    If regrowth is desired, do not graze shorter than 6 to 10 inches. Regrowth should be managed in the same manner. Pearl millet can be cut for hay, ensiled, or used for green-chop. Cut for hay or wilted silage once stands reach 30 to 40 inches.

  • Educational programs of Kentucky Cooperative Extension serve all people regardless of economic or social status and will not discriminate on the basis of race, color, ethnic origin, national origin, creed, religion, political belief, sex, sexual orientation, gender identity, gender expression, pregnancy, marital status, genetic information, age, veteran status, or physical or mental disability. Issued in furtherance of Cooperative Extension work, Acts of May 8 and June 30, 1914, in cooperation with the U.S. Department of Agriculture, Nancy M. Cox, Director of Cooperative Extension Programs, University of Kentucky College of Agriculture, Food and Environment, Lexington, and Kentucky State University, Frankfort. Copyright © 2017 for materials developed by University of Kentucky Cooperative Extension. This publication may be reproduced in portions or its entirety for educational or non-profit purposes only. Permitted users shall give credit to the author(s) and include this copyright notice. Publications are also available on the World Wide Web at www.ca.uky.edu.Issued 2-2018

    Pearl Millet FactsCommon Name: Pearl millet

    Scientific Name: Pennisetum americanum

    Origin: North-central Africa

    Growth Characteristics: Erect, leafy, an-nual grass that grows 3-8 feet tall

    Adaptation: All of Kentucky

    Major Uses: Excellent summer grazing, can be used for hay and silage

    Drought Tolerance: Very good, better adapted to sandier soils than sorghum species

    Soil Drainage: Well drained to somewhat poorly drained

    Weight per Bushel: 45-55 pounds

    Number of Seed per Pound: 86,000

    Seeding Rate: 25-30 lb/A broadcast or 15-20 lb/A drilled

    Seeding Date: When there is no chance of frost and when soil temperature is at least 65ºF

    Seeding Depth: ½ to 1 inch

    Time to First Grazing: 45-60 days

    Expected Yield: Hay—2 to 4 tons DM per acre, silage—6 to 12 tons/acre at 65% moisture

    Soil pH: Optimum pH is 5.5 to 6.5, better adapted to lower pH than Sorghum species

    Fertilization: Apply phosphorus and potassium according to soil test; nitrogen, 60-80 lb/A at establishment and 40-60 lb/A

    after each intensive grazing or cutting when regrowth is desired.

    Seasonal Distribution: 90% of growth in June, July, and August

    Grazing Management: Start grazing at 18 inches tall. Graze to a height of 6 to 10 inches. Manage regrowth in same manner.

    Hay or Wilted Silage Management: Cut when plants reach a height of 30-40 inches and leave a 6 to 10 inch stubble. Use mower-conditioner to crush stems.

    Forage-related Disorders: Nitrate poison-ing. To avoid nitrate poisoning do not apply excessive amounts of nitrogen fertilizer. Do not graze drought stressed or slow growing plants. For more information on nitrates see ID-217: Forage-related Cattle Disorders–Ni-trate Poisoning.