Embed Size (px)
Citation preview
SEQ. #416-1118 MINNESOTA PRICING PAGES(Typed Responses Required)
November, 2018
Price quote for: AFTERMARKET TRACTOR, SKIDSTEER & WHEEL LOADER ATTACHMENTS
Vendor Name: LANO EQUIPMENT - ANOKAContact Person: SCOTT FAHEY
Street Address: 6140 HWY 10 NW
P.O. Box:City, State, Zip ANOKA, MN 55303
Phone #: 612-223-0510
Toll Free #: 888-448-5266
Fax #: 763-422-3949
Email Address: [email protected]
8.0 MANUFACTURER:NORMAND SNOW
BLOWERS
9.0ATTACHMENT DESCRIPTION: SNOW BLOWERS
AND SPREADERS
10.0 WARRANTY TERM (Months/Years): 1 YEAR
11.0 PERCENT DISCOUNT (%) TO BE APPLIED TO LIST: 0%
11.1 DATE AND/OR I.D. OF PRICE LIST: 2018 PRICE LIST
12.0 DELIVERY CHARGES: (NO FLAT RATE ALLOWED)(See Special Terms and Conditions)
12.1 DELIVERY STARTING POINT (City) St-Pascal
(State, Zip Code) Quebec, CA G0L
3Y0
12.2 PRICE PER LOADED MILE: $1/MILE
13.0 PRICE FOR ADDITIONAL SERVICE MANUAL: NC
13.1 PRICE FOR ADDITIONAL PARTS MANUAL: NC
14.0 INSTALLATION SERVICES - $ PER HOUR (Shop Rate): $109.00 Installation services may be requested on an "as needed" basis.(See Special Terms and Conditons)
Attchment C
US$ SNOWBLOWERS
AND OTHER EQUIPMENT
US$ PRICE LIST 2018–2019 Effective April 1st, 2018
3
TABLE OF CONTENTS US$ PRICE LIST 2018-2019
Effective April 1st, 2018
Page
New 2018 - 2019 ............................................................................................................................... v
General informations ......................................................................................................................... 1
Assembly fees ................................................................................................................................... 2
Information on lifetime of P.T.O ......................................................................................................... 3
ECONOR® Plus snowblowers Option Groups................................................................................... 6
Prices..................................................................................................... 7
Specifications ......................................................................................... 9
Conversion kit for ECONOR® Plus snowblowers for Skid Steer ...................................................... 10
** NEW ** Hydraulic Ice ripper for snowblower ................................................................................ 12
** NEW ** JD TerrianCut snowblower ............................................................................................. 13
N54-240H @ N86-260HTR NORMAND snowblowers Prices ......................................................... 15
Specifications ................................................. 18
N86-280H @ N92-280HDTR, N98-280H NORMAND snowblowers Prices ..................................... 19
Specifications .......................... 22
N92-310H @ N98-312HTR NORMAND snowblowers Prices .......................................................... 23
Specifications ................................................. 29
N98-340H @ N112-342HTR NORMAND snowblowers Prices ........................................................ 26
Specifications ............................................... 29
HE+ Series Normand snowblowers with Essa + scraper blades Prices ......................................... 30
Specifications ............................... 35
N50-262H, N60-262H NORMAND snowblowers for sidewalks Prices .......................................... 36
Specifications ............................... 38
** NEW ** Hybrid Series snowblowers Prices ................................................................................. 39
Specifications ......................................................................... 42
4
TABLE OF CONTENTS (suite) US$ PRICE LIST 2018-2019
Effective April 1st, 2018 N74-250HINV, N82-260HINV N92-280HINV, N102-310HINV
NORMAND Pull type models Prices ....................... 43
Specifications ............ 46
N99-342HTRSI, N100-342TRI @ N120-402TRI NORMAND Industrial models Prices ...................... 47
Specifications ........... 51
Rising & Reducer boxes, Accelerator boxes .................................................................................... 52
Transfert boxes (for front mounted snowblowers) ............................................................................ 54
SCR-54, SCR-72, SCR-86, SCR-92 & SCR-98 Self loading salt & sand spreaders ........................ 55
S3P-46, S3P-56 Salt & sand spreaders on 3-points hitch ................................................................ 56
Chutes (lengths, weights, etc.) .......................................................................................................... 59
Warranty .................................................................................................................................................. 63
v
Hydraulic ice ripper page 12 JD TerrainCut Front Blower page 13
Hybrid Series snowblowers page 37
- N74-250HYB - N82-260HYB - N92-280HYB - N100-310HYB
H Industrial Series snowblowers page 45
- N102-342HTRI - N110-342HTRI - N120-342HTRI
NEW
GENERAL INFORMATIONS
2018
1
N E 112 – 34 2 C H TR S I INV HYB Identifies a hybrid type snowblower
Identifies an inverted type (pull type) snowblower
Identifies an industrial snowblower with many components in Hardox 450
Identifies an semi industrial snowblower with many components in Hardox 450
Identifies a snowblower with a rotary drum
Identifies a snowblower with many components in Hardox 450
Identifies a snowblower for compact tractor series
Identifies the number of augers 0 one auger with low profile 1 one auger with the possibility to add a second auger on top 2 two augers
Identifies the diameter of the impeller (inches) Possibilities : 20, 22, 24, 25, 26, 28, 31, 34, 36 & 40 inches
Identifies the cutting width of the snowblower (inches) Possibilities : 48, 50, 54, 60, 66, 68, 72, 74, 78, 80, 82, 86, 92, 94, 98, 100, 102, 110, 112…120
Identifies the snowblowers of ECONOR series
Identifies the snowblowers of NORMAND series
Effective April 1st, 2018 US$ Price List TNA Sales and Distribution 218-770-5473
US$ 2018
Effective April 1st, 2018 US$ Price List TNA Sales and Distribution
2 218-770-5473
FEES FOR ASSEMBLY OF SNOWBLOWERS NO STATE CONTRACT DISCOUNTS ON ASSEMBLY
-included complete greasing of the unit -included testing of hydraulic mechanisms when buying hydraulic hoses
Description of assemblies Models Net prices
Hydraulic ice ripper assembly AS-PG $118
Econor Plus assembly & greasing Chute, 3-pts pins, rotation skid shoes, cylinder and hoses if ordered AS-ECONOR $218
N54-240H @ N86-260HTR, N74-250HYB, N82-260HYB assembly & greasing Chute, 3-pts attachment, rotation, cylinder & hoses if ordered
AS-N240-260
$271
N86-280H @ N92-280HDTR, N92-280HYB, N98-280H assembly & greasing Gear for chute, chute, 3-pts attachment, rotation, cylinder, hydraulic motor for rotative drum & hoses if ordered
AS-N280
$281
N92-310H@ N112-342HTR, N100-310HYB assembly & greasing Gear for chute, chute, 3-pts attachment, rotation. cylinder, hydraulic motor for rotative drum & hoses if ordered
AS-N310-342
$315
ECONOR/NORMAND Pull type assembly & greasing Gear for chute, chute, 3-pts pins, rotation, cylinder, rear blade & hoses if ordered
AS-NINV $218
The prices for assembly included only labor Prices shown in section «Fees for assembly of snowblowers» are NET prices
No discount applicable on them.
US$ 2018
Effective April 1st, 2018 US$ Price List TNA Sales and Distribution
3 218-770-5473
IMPORTANT NOTICE
The lifetime of the driving shaft and its components such as forks, seals and tubes depends on several factors that cannot be controlled by Normand Company. The following issues directly affect the lifetime of the drive shaft:
• Too big tractors (an excessive P.T.O. angle) • The P.T.O. joints • The angle on each end of the P.T.O must be equal. • The shear bolts (use only the original bolts) • The frequency of lubrication and the type of grease used (good quality grease, industrial-type) • Maximum length of the P.T.O.
In the event that one or more of the above mentioned situations applies, we suggest you as an option the following solutions.
• To increase the distance from the tractor to the snowblower would reduce the angle at the joints. • A bigger driving shaft (for an intensive use when the tractor is at the top of the recommended power would
extend the lifetime of the shaft when the operating angle is moderate. • A driving shaft with multilobe tubes (would facilitate the sliding of the tubes) • The installation of a raiser and reducer gearbox 1000 rpm to 540 rpm on the snowblower would reduce the
angle and mechanical stress of the P.T.O. on the tractor.
TO AVOID ACCEPTABLE
TOO BIG ANGLE AT THE P.T.O. JOINTS REASONABLE ANGLE AT THE P.T.O. JOINTS
TO AVOID RECOMMENDED
NON EQUALS ANGLES AT THE P.T.O. JOINTS EQUAL ANGLES AT THE P.T.O. JOINTS
Effective April 1st, 2018 US$ Price List TNA Sales and Distribution
5 218-770-5473
SNOWBLOWERS
Effective April 1st, 2018 US$ Price List TNA Sales and Distribution
6 218-770-5473
Description of Option Groups to add to the basic price
Option Group 1 (EN-GO1-1, EN-GO1-2, EN-GO1-3, EN-GO1-4)
Included : Regular chute with 1 deflector, manual rotation, rod for chute deflector action and hardware.
Option Group 2 : (EN-GO2-1, EN-GO2-2, EN-GO2-3, EN-GO2-4)
Included : Regular chute with 1 deflector, hydraulic chute rotation with hyd. motor with cushion valve, rod for chute deflector action and hardware.
Option Group 3 : (EN-GO3-1, EN-GO3-2, EN-GO3-3, EN-GO3-4)
Included : Regular chute with 1 deflector, hydraulic chute rotation with hyd. motor with cushion valve, hydraulic cylinder for chute deflector action (and flow reducer if required) and hardware.
Option Group 4 : (EN-GO4-1, EN-GO4-2, EN-GO4-3)
Included : Semi industrial chute with 2 deflectors, hydraulic chute rotation with hyd. motor with cushion valve, hydraulic cylinder for chute deflector action (and flow reducer if required) and hardware.
SNOWBLOWERS US$ 2018
E48-200
Plus E54-220
Plus E60-220
Plus E66-220
Plus E72-240
Plus E78-250
Plus E86-280
Plus E94-280
Plus E100-310
Plus E108-310
Plus E68-220INV
Kit EN-E48-200 Plus
EN-E54-220 Plus
EN-E60-220 Plus
EN-E66-220 Plus
EN-E72-240 Plus
EN-E78-250 Plus
EN-E86-280 Plus
EN-E94-280 Plus
EN-E100-310 Plus
EN-E108-310 Plus
EN-E68-220INV
Recommended horsepower (HP PTO) 16 @ 40* 16 @ 40* 18 @ 40* 25 @ 40 25 @ 40 35 @ 70** 50 @ 80 50 @ 80 75 @ 125 75 @ 125 25 @ 40
Basic price (including P.T.O., skid shoes and hardware)
$2,695 $2,768 $2,909 $3,184 $3,536 $4,066 $4,938 $5,175 $6,710 $7,355 $4,591
Option Group 1 (see details page 6)
EN-GO1-1 $577
EN-GO1-1 $577
EN-GO1-1 $577
EN-GO1-1 $577
EN-GO1-1 $577
EN-GO1-1 $577
EN-GO1-2 $683
EN-GO1-2 $683
EN-GO1-3 $780
EN-GO1-3 $780
EN-GO1-4 $577
Option Group 2 (see details page 6)
EN-GO2-1 $884
EN-GO2-1 $884
EN-GO2-1 $884
EN-GO2-1 $884
EN-GO2-1 $884
EN-GO2-1 $884
EN-GO2-2 $991
EN-GO2-2 $991
EN-GO2-3 $1 088
EN-GO2-3 $1 088
EN-GO2-4 $884
Option Group 3 (see details page 6)
EN-GO3-1 $981
EN-GO3-1 $981
EN-GO3-1 $981
EN-GO3-1 $981
EN-GO3-1 $981
EN-GO3-1 $981
EN-GO3-2 $1 089
EN-GO3-2 $1 089
EN-GO3-3 $1 195
EN-GO3-3 $1 195
EN-GO3-4 $981
Option Group 4 (see details page 6)
EN-GO4-1 $1 422
EN-GO4-1 $1 422
EN-GO4-1 $1 422
EN-GO4-1 $1 422
EN-GO4-1 $1 422
EN-GO4-1 $1 422
EN-GO4-2 $1 596
EN-GO4-2 $1 596
EN-GO4-3 $1 800
EN-GO4-3 $1 800
-
Chain accelerator 1 :1.28 540 RPM @ 693 RPM
06-2300 $607
06-2300 $607
06-2300 $607
06-2300 $607
06-2300 $607
06-2302 $607
–
–
–
–
–
Chain rising box 1 :1 540 RPM @ 540 RPM – – – – – – 06-2303
$1 072 06-2303 $1 072 – –
–
Box reducer with 3 gears (175HP) 1000 @ 540RPM & reducer/reverser (225HP) 1 ¾ - 20 splines, including mounting kit)
-
-
-
-
-
-
-
-
SBR-200 $3 000
SBR-200 $3 000
-
Rear scraper with carbon steel blade with chain – – – – – – – – – – 49-5804
$1 007 Rear scraper with Tivar blade with chain – – – – – – – – – – 49-5805
$1 167 Chain guard with hardware (black – installation non included – 2 holes to drill)
EN-GC01 $55
EN-GC01 $55
EN-GC01 $55
EN-GC01 $55
EN-GC01 $55
EN-GC01 $55
EN-GC01 $55
EN-GC01 $55
EN-GC01 $55
EN-GC01 $55
EN-GC01 $55
Hoses kit with connectors (not inst.) for chute rotation only (Option Group 2)
14-2100-35 $138
14-2100-35 $138
14-2100-35 $138
14-2100-35 $138
14-2100-35 $138
14-2100-35 $138
14-2100-36 $138
14-2100-36 $138
14-2100-36 $138
14-2100-36 $138
14-2100-36 $138
Hoses kit with connectors (not inst.) for chute rotation & hydraulic cylinder (Option Group 3 & 4)
14-2100-26 $276
14-2100-26 $276
14-2100-26 $276
14-2100-26 $276
14-2100-26 $276
14-2100-26 $276
14-2100-12 $297
14-2100-12 $297
14-2100-12 $297
14-2100-12 $297
14-2100-25 $276
Use with a P.T.O. shaft T40 if more than 30 HP ** Use with a P.T.O. shaft T60 if more than 40 HP
7
Effective April 1st, 2018 US$ Price List TNA Sales and Distribution 218-770-5473
US$ 2018
NB : No cancellation of special color will be accepted.
Blades & skid shoes wear not covered by the warranty
(suite)
8
Effective April 1st, 2018 US$ Price List TNA Sales and Distribution 218-770-5473
OPTIONAL accessories to add to the price PTO SHAFT PART # PRICE (extra) Supplement for PTO T40 in replacement of PTO T20 SPTO T40/T20 $72 Supplement for PTO T60 in replacement of PTO T40 SPTO T60/T40 $132 PTO SHAFT 1 ¾ - 20 splines snowblower side With reducer box 1 3/8 - 21 splines tractor side
PART #
PRICE (extra)
T80 SPTO-T80RED $168 ASSEMBLY PART # NET PRICE Econor Plus assembly & greasing Chute, 3-pts pins, rotation, skid shoes, cylinder and hoses if ordered For complete details see page 2
AS-ECONOR
$218
Econor Pull type assembly & greasing Gear for chute, chute, 3-pts pins, rotation, cylinder, rear blade & hoses if ordered For complete details see page 2
AS-NINV
$218
SPECIAL COLORS (ordered before fabrication) E48-200 Plus @ E78-250 Plus
E86-280 Plus @ E108-310 Plus
Surfacer epoxy, urethane painting (black, blue, green, orange, yellow ind.) $118 $141
US$ 2018
1 auger E48-200
Plus E54-220
Plus E60-220
Plus E66-220
Plus E72-240
Plus E78-250
Plus E86-280
Plus E94-280
Plus E100-310
Plus E108-310
Plus E68-220INV
Recommended horsepower (HP PTO) 16 @ 40* 16 @ 40* 18 @ 40* 25 @ 40 25 @ 40 35 @ 70** 50 @ 80 50 @ 80 75 @ 125 75 @ 125 25 @ 40
Cutting width 48’’ 54’’ 60’’ 66’’ 72’’ 78’’ 86’’ 94’’ 100’’ 108’’ 68’’
Cutting height 26’’ 28’’ 28’’ 28’’ 30’’ 31’’ 36’’ 36’’ 38 ½’’ 38 ½’’ 26 ¼’’
Impeller RPM 540 540 540 540 540 540 540 540 540 540 540
Impeller diameter 20’’ 22’’ 22’’ 22’’ 24’’ 25’’ 28’’ 28’’ 31’’ 31’’ 22’’
Impeller shaft diameter 1 ¼’’ 1 ¼’’ 1 ¼’’ 1 ¼’’ 1 ¼’’ 1 9/16’’ 1 9/16’’ 1 9/16’’ 2’’ 2’’ 1 ¼’’
Impeller depth 7’’ 7’’ 8’’ 8’’ 8 ½’’ 9’’ 11’’ 11’’ 12’’ 12’’ 8’’
Impeller center height 13 ½’’ 14 ½’’ 14 ½’’ 14 ½’’ 15 ½’’ 16’’ 18’’ 18’’ 20’’ 20’’ 14 ½’’
Balanced impeller Std Std Std Std Std Std Std Std Std Std Std
Number of blades 4 4 4 4 4 4 4 4 5 5 4
Main auger diameter 17’’ 17’’ 17’’ 17’’ 17’’ 17’’ 20’’ 20’’ 23’’ 23’’ 15’’
Balanced auger Std Std Std Std Std Std Std Std Std Std Std
Chute rotation on Polyethylène
Manual Opt. Opt. Opt. Opt Opt. Opt. Opt. Opt. Opt. Opt. Opt.
Hydraulic motor (gear) Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt.
Chute 1 or 2 deflectors (Option) 1 or 2 1 or 2 1 or 2 1 or 2 1 or 2 1 or 2 1 or 2 1 or 2 1 or 2 1 or 2 1
Manual deflector Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt Opt.
Hydraulic deflector Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt Opt.
Carbon steel blade Std Std Std Std Std Std Std Std Std Std Std bolted
Adjustable skid shoes Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt.
Storage foot Std Std Std Std Std Std Std Std Std Std -
P.T.O shaft number T20 T20 T20 T40 T40 T40 T60 T60 T80 T80 T40 long
Driving chain number 50 50 60 60 60 60 60 60 80 80 60
Number of safety bolts 2 2 2 2 2 2 2 2 3 3 2
Hitch category (QA = quick hitch) 1 1 1 1 1 1 2 2 2 2 1, QH
Approx. weight (lb) 373 413 490 522 548 610 970 994 1484 1 525 595
* Use with a P.T.O. shaft T40 if more than 30 HP ** Use with a P.T.O. shaft T60 if more than 40 HP The weight does not include chute and accessories. Specifications are subject to change without notice
9
Effective April 1st, 2018 US$ Price List TNA Sales and Distribution 218-770-5473
Effective April 1st, 2018 US$ Price List TNA Sales and Distribution
10
218-770-5473
CONVERSION KIT
FOR SNOWBLOWERS
for Skid Steer
Effective April 1st, 2018 US$ Price List TNA Sales and Distribution
11
218-770-5473
CONVERSION KIT FOR SNOWBLOWERS for Skid Steer
** Can also be fitted on some models of NORMAND snowblowers
PART #
DESCRIPTION
OIL VOLUME
REQUIRED GPM
MOTOR POWER (HP equivalent) at 2,750 LBS PRESSURE
BASIC PRICES*
49-3610-01 Conversion kit 100S for E54-220 Plus & E60-220 Plus
15@18 = 18@23 HP $4,678
49-3610-02 Conversion kit 125S for E54-220 Plus & E60-220 Plus 18@23 = 23@26 HP $4,849
49-3610-03
Conversion kit 60S for E54-220 Plus, E60-220 Plus, E66-220 Plus & E72-240 Plus
23@25
= 28@32 HP
$4,853
49-3610-04
Conversion kit 160T for E54-220 Plus, E60-220 Plus, E66-220 Plus & E72-240 Plus
23@28
= 28@36 HP
$5,288
49-3610-05
Conversion kit 200T for E54-220 Plus, E60-220 Plus, E66-220 Plus & E72-240 Plus
28@35
= 36@45 HP
$5,313
49-3610-06 Conversion kit 160T forr E78-250 Plus 23@28 = 28@36 HP $5,367
49-3610-07 Conversion kit 200T for E78-250 Plus 28@35 = 36@45 HP $5,485
THE ABOVE PRICES OF CONVERSION KIT INCLUDE
• Hydraulic distribution block controlling the rotation of the impeller an deflector
• Hydraulic motor for the rotation of the shaft of the fan ; • Hoses connecting the distribution block to the motors (2) and the cylinder • Attachment adaptor for « skid steer »
d auger, chute rotation a nd action of
ESSENTIAL ACCESSORIES TO ADD THE BASIC PRICES PART # PRICE ECONOR snowblowers E54-220 Plus @ E78-250 Plus See page 7 Dual trigger swith control including wiring 14-8601-02 $541 14 Pins connector including wiring 49-3610-10 $658
ARE NOT INCLUDED Hoses between skid steer and hydraulic distribution block
* Do not forget to add the price of the snowblower and the price of the Option Group 3 or 4 to the basic price of the conversion kit. Prices are available at the page 7.
Effective April 1st, 2018 US$ Price List TNA Sales and Distribution
12
218-770-5473
HYDRAULIC ICE RIPPER FOR SNOWBLOWER
Description Weight Product # Prices Hydraulic ice ripper, 84’’, including 1 hydraulic cylinder 2 ½’’ x 8’’ and hoses For N86-280H to N98-280H, N86-280HE+, N92-280HE+
235 lbs
29-6900
$1 918
Hydraulic ice ripper, 84’’, including 1 hydraulic cylinder 2 ½’’ x 8’’ and hoses For N92-310H to N92-312HTR, N92-310HE+
240 lbs
29-7900
$1 918
Hydraulic ice ripper, 96’’, including 1 hydraulic cylinder 2 ½’’ x 8’’ and hoses For N98-310H to N112-342HTR, N98-341HE+, N98-342HE+, N99-342HTRSI, N102-342HTRI
255 lbs
29-8900
$1 936
** The hydraulic ice ripper can be installed on snowblowers listed above
Description Assembly Net price Assembly of the hydraulic ice ripper on the snowblower ** offered only when assembly of snowblower is also choose
AS-PG $118
In function
In storage
The hydraulic ice ripper makes it possible to grind the surfaces in order to deglaze them. When put into operation, the weight of the snowblower is added to the hydraulic ice ripper to give it more grip. The activation and storage action is done hydraulically.
The ice ripper is bolted and made of carbon steel.
The mechanism and the fixing plates of the ice ripper are made of Hardox 450 steel.
13
n 218-770-5473
Effective April 1st, 2018 US$ Price Li
st TNA Sales and Distributio
TRA)
EN-N62-240HFMV (20 @ 40 HP)
$8 637,00 Snowblower developed for JD1585 TerrainCut tractor from John Deere Included
- N62-240HFM model snowblower - Green color - Lifting limiters (2) for tractor cylinders and hardware - 29-3789 : Semi industrial chute (2 deflectors) - 29-3789-60 : Front removable anti fog panel for chute - EN14-1013 : Cylinder and flow reducer for the cylinder on chute deflector - EN-ROTE18 : Rotation kit including hydraulic motor with valve, gears. - Carbon steel blade and skid shoes - 06-2500-03 : PTO - snowblower side : 1 3/8’’ – 6 splines / Tractor side : 1’’ – 15 splines - 14-2100-40 : Complete hoses kit including connectors - AS-N240-260 : Complete assembly of the snowblower
Not included - 2x Quick connect coupler – body ¼’’ with SAE-6 thread AM102487 - 2x Quick connect coupler – Nipple ¼’’ with SAE-6 thread AM102420
Available at your John Deere dealer
OPTIONAL accessories to add to the price
NB an «S» before the part number means that extra cost have to be added to the base price for the replacement of the original part.
OPTION FOR CHUTE
For chute 29-3789 Hyd. cylinder 2’’ x 4’’ – 3 000 psi (with flow reducer) S14-101 3-10 $29
SKID SHOES AND BLADE KITS
Hardness level of material 1 being hardes and 3 the softness PART # PRICE (EX
Stainless steel (2) N60-240H SCPI-60H $365
Hardox 450 (1) N60-240H SCPH-60H $194
TIVAR (3) N60-240H SCPT-60H $703
BLADE AND SKID SHOES WEAR NOT COVERED BY THE WARRANTY
13
GENERAL SPECIFICATIONS N62-240HFM Recommended horsepoer (HP PTO) 20 @ 40 * Cutting width 62’’ Cutting height 28 ½" Impeller RPM 540 Impeller diameter 24" Impeller depth 7 ½’’ Number of blades 4 Impeller shaft diameter 1 ¼" Balanced impeller Std Impeller center height 14'' Cylinder for chute deflector 2" X 4" Chute rotation by hydraulic motor Std Manual deflector Opt. Hydraulic deflector Opt. Semi industrial chute (2 deflectors) Std Hoses holder Std Main auger diameter 17" Balanced auger Std Reversible carbon steel blade Std Reversible Hardox 450 blade Opt. Reversible stainless steel blade Opt. Tivar blade Opt. Lateral blade Opt. Adjustable carbon steel skid shoes Std Adjustable Hardox 450 skid shoes Opt. Adjustable stainless steel skid shoes Opt. Adjustable Tivar skid shoes Opt. Driving chain 60 Storage foot Std Quantity of safety bolts 1x - Impeller, 1x - Auger Bearing ductile iron casing Std PTO shaft High speed Reducer box Std Approx weight (lbs) chute & accessories 800
14
Prices and spe
Effective April 1st, 2018 US$ Price List TNA Sales and Distribution 218-770-5473
US$ 2018
15
NORMAND SNOWBLOWERS
Effective April 1st, 2018 US$ Price List TNA Sales and Distribution 218-770-5473
US$ 2018
Effective April 1st, 2018 US$ Price List 218-770-5473 TNA Sales and Distribution
16
45 @ 75 HP
PTO shaft 1 3/8 – 6 splines snowblower side 1 3/8 – 6 splines tractor side
PART #
PRICE
T20 for N54-240H & N60-240H 06-0006 Included T40 for N68-250H & N74-250H 06-0010 Included T60 for N74-260H, N82-260H @ N86-260HTR 06-0015 Included CHUTE FOR N54-240H @ N74-250H PART # PRICE Semi Industrial with one flat deflector and one rounded deflector 29-3789 Included CHUTE FOR N74-260H @ N86-260HTR PART # PRICE Semi Industrial with one flat deflector and one rounded deflector 29-3799 Included CHUTE ROTATION PART # PRICE Hydraulic motor with chromed shaft and cushion valve and support 29-4942 Included CHUTE DEFLECTOR ACTION PART # PRICE For chute 29-3789 Hydraulic cylinder 2" x 4" 2 500 psi (with flow reducer) 14-1013 Included
For chute 29-3799 Hydraulic cylinder 2’’ x 6’’ 2 500 psi (with flow reducer) 14-1016 Included
ROTARY DRUM FOR MODELS N82-260HTR & N86-260HTR PART # PRICE Hydraulic motor with chromed shaft and cushion valve 14-8205-25 Included
FOR CHUTE PART # PRICE For chute 29-3789 Anti fog removable front panel 29-3789-60 $99 For chute 29-3799 Anti fog removable front panel 29-3799-60 $99 For chute 29-3789 Hydraulic cylinder 2" x 4" 3 000 psi (with flow reducer) S14-1013-10 $29 For chute 29-3799 Hydraulic cylinder 2’’ x 6’’ 3 000 psi (with flow reducer) S14-1016-HD $34 Telescopic gap rod (manual) IN REPLACEMENT OF HYDRAULIC CYLINDER 29-4850 $0
Each kit includes: PTO shaft Semi industrial chute, Hydraulic motor with cushion valve and support for chute rotation Hydraulic cylinder for chute deflector Carbon steel skid shoes and cutting edge Complete hoses holder Hydraulic motor with cushion valve for rotary drum (TR) (if required)
Accessories INCLUDED in the price of the kit
OPTIONAL accessories to add to the price of the kit NB : An «S» before the part number means that extra costs have to be added to the base price for the replacement of the original part.
MODELS AND PRICE OF KITS 20 @ 40 HP* 40 @ 65 HP 40 @ 65 HP
N54-240H N60-240H N68-250H N74-250H N74-260H N82-260H $6,389 $6,490 $7,376 $7,436 $7,729 $7,829
N82-260HTR $9,512
US$ 2018
Effective April 1st, 2018 US$ Price List 218-770-5473 TNA Sales and Distribution
17
OPTIONAL accessories to add to the price of the kit NB : An «S» before the part number means that extra costs have to be added to the base price for the replacement of the original part. PTO shaft 1 3/8 – 6 splines snowblower side 1 3/8 – 6 splines tractor side
PART #
PRICE
T40 In replacement of PTO T20 for N54-240H & N60-240H SPTO-T40/T20 $72
SKID SHOES & BLADES KITS Hardness level of material 1 being the hardest & 3 the softness. PART # PRICE (extra)
Carbon steel (2)
All blades & skid shoes installed on all snowblowers are made with carbon steel.
–
Included
Stainless steel (2)
N54-240H SCPI54H $379 N60-240H SCPI60H $392 N68-250H SCPI68H $398 N74-250H, N74-260H SCPI74H $399 N82-260H & N82-260HTR SCPI82H $422 N86-260H & N86-260HTR SCPI86-260H $446
Hardox 450 (1)
N54-240H SCPH54H $208 N60-240H SCPH60H $206 N68-250H SCPH68H $209 N74-250H, N74-260H SCPH74H $209 N82-260H & N82-260HTR SCPH82H $197 N86-260H & N86-260HTR SCPH86-260H $212
Tivar (3)
N60-240H SCPT60H $756 N68-250H SCPT68H $773 N74-250H, N74-260H SCPT74H $771 N82-260H & N82-260HTR SCPT82H $760 N86-260H & N86-260HTR SCPT86-260H $760
Blades & skid shoes wear not covered by the warranty
FIXED LATERAL BLADES N54-240H @ N86-260HTR PART # PRICE For N54-240H@ N86-260HTR Set of fixed lateral blades (left & right) (40” heigth, 3” width) 29-4314 $287
HOSES KIT WITH CONNECTORS – NOT INSTALLED PART # PRICE For N54-240H @ N86-260H, for 2 hydraulic functions 14-2100-03 $286 For N82-260HTR & N86-260HTR, for 3 hydraulics functions 14-2100-04 $373 ASSEMBLY PART # NET PRICE Assembly N54-240H @ N86-260HTR Chute, 3-pts, rotation, cylinder, motor for rotary drum and hoses if ordered For complete details, see page 2
AS-N240-260
$271
SPECIAL COLORS (ordered before fabrication) MODELS PRICE
Surfacer epoxy, urethane painting (black, blue, green, orange, yellow ind.)
N54-240H @ N86-260HTR
$141
NB : No cancellation of special color will be accepted.
For all models of boxes reducer or accelerator, specifications & prices, see pages 50 to 52
2018
1 auger only (LP)
NORMAND N54-240H N60-240H N68-250H N74-250H N74-260H N82-260H N82-260HTR
N86-260H N86-260HTR
Recommended horsepower (HP PTO) 20 @ 40* 20 @ 40* 25 @ 45 25 @ 45 40 @ 65 40 @ 65 45 @ 75
Cutting width 54" 60" 68" 74" 74" 82" 86" Cutting height 28 ½" 28 ½" 29 ½" 29 ½" 32 ½" 32 ½" 32 ½" Impeller RPM 540 540 540 540 540 540 540 Impeller diameter 24" 24" 25" 25" 26" 26" 26" Impeller depth 7 ½" 7 ½" 9" 9" 11" 11" 11" Number of blades 4 4 4 4 4 4 4 Impeller shaft diameter 1 ¼" 1 ¼" 1 9/16" 1 9/16" 1 9/16" 1 9/16" 1 9/16" Balanced impeller Std Std Std Std Std Std Std Drum center height 14" 14" 14 ½'' 14 ½'' 15 ½'' 15 ½'' 15 ½" Removable rotary drum - - - - - - / Std - / Std Cylinder for chute (deflector) 2" X 4" 2" X 4" 2" X 4" 2" X 4" 2" X 6" 2" X 6" 2" X 6" Chute rotation by hydraulic motor (gear with Std Std Std Std Std Std Std Manual deflector Opt. Opt. Opt. Opt. Opt. Opt. Opt. Hydraulic deflector Std Std Std Std Std Std Std Semi industrial chute (2 deflectors) Std Std Std Std Std Std Std Hydraulic telescopic chute - - - - - - Opt. Hoses holder Std Std Std Std Std Std Std Main auger diameter 17" 17" 17" 17" 19 ½" 19 ½" 19 ½" Upper auger diameter - - - - - - - Balanced auger Std Std Std Std Std Std Std Revesible carbon steel blade Std Std Std Std Std Std Std Reversible Hardox 450 blade Opt. Opt. Opt. Opt. Opt. Opt. Opt. Reversible stainless steel blade Opt. Opt. Opt. Opt. Opt. Opt. Opt. Tivar blade Opt. Opt. Opt. Opt. Opt. Opt. Opt. Lateral blades Opt. Opt. Opt. Opt. Opt. Opt. Opt. Adjustable carbon steel skid shoes Std Std Std Std Std Std Std Adjustable Hardox 450 skid shoes Opt. Opt. Opt. Opt. Opt. Opt. Opt. Adjustable stainless steel skid shoes Opt. Opt. Opt. Opt. Opt. Opt. Opt. Adjustable Tivar skid shoes Opt. Opt. Opt. Opt. Opt. Opt. Opt. Driving chain number 60 60 60 60 60 60 60 Storage foot Std Std Std Std Std Std Std Number of safety bolts 2 2 2 2 2 2 2 Bearing ductile iron casing Std Std Std Std Std Std Std Shaft P.T.O. standard T20 T20 T40 T40 T60 T60 T60 1 000 @ 540 reducer box - - - - - - - Adjustable hitch Std Std Std Std Std Std Std Hitch category (QH = quick hitch) 1, QH 1, QH 1, QH 1, QH 1, 1QH, 2 1, 1 QH, 2 1, 1 QH, 2
Approx. weight (lb) - 1 auger 515 555 675 710 906 950 1 060
996 1 105
* Use with a P.T.O. shaft T40 if more than 30 HP The weight does not include chute and accessories. Specifications are subject to change without notice
.
18
Effective April 1st, 2018 TNA Sales and Distribution 218-770-5473
US$ 2018
Effective April 1st, 2018 US$ Price List 218-770-5473 TNA Sales and Distribution
19
Each kit includes: PTO shaft Semi industrial chute, Hydraulic motor with cushion valve and support for chute rotation Gear for chute rotation Hydraulic cylinder for chute deflector Carbon steel skid shoes and cutting edge Complete hoses holder Hydraulic motor with cushion valve for rotary drum (TR) (if required)
MODELS AND PRICE OF KITS 60 @ 85 HP 60 @ 85 HP 60 @ 85 HP 60 @ 85HP 75 @ 120 HP 75 @ 120 HP
N86-280H N86-281H N86-282H N92-280H N92-280HD N98-280H $8,961 $9,702 $10,505 $9,315 $10,13 $10,809
N86-280HTR N86-281HTR N86-282HTR N92-280HDTR $10,642 $11,378 $12,179 $11,992
PTO SHAFT 1 3/8 – 6 splines snowblower side 1 3/8 – 6 splines tractor side
PART #
PRICE
PTO T60 for N86-280H @ N86-282HTR et N92-280H (60 @ 85HP) 06-0015 Included PTO SHAFT 1 ¾ - 20 splines snowblower side 1 3/8 – 6 splines tractor side
PART #
PRICE
PTO T80 for N92-280HD, N92-280HDTR, N98-280H (75 @ 120HP) 06-0001 Included
SEMI-INDUSTRIAL CHUTE PART # PRICE Semi Industrial with one flat deflector and one rounded deflector 29-0798 included
CHUTE ROTATION PART # PRICE
For N86-280H @ N92-280HDTR & N98-280H Hydraulic motor with chromed shaft and cushion valve and support
29-1923
Included
Gear for the chute 29-0908 Included
CHUTE DEFLECTOR ACTION PART # PRICE Hydraulic cylinder (2 ½"x 8") 2 500 psi 14-1011 Included
ROTARY DRUM FOR MODELS N86-280HTR @ N92-280HDTR PART # PRICE Hydraulic motor with chromed shaft and cushion valve 14-8206-25 Included
OPTIONS FOR SEMI INDUSTRIAL CHUTE 29-0798 PART # PRICE
Anti fog removable front panel 29-0798-60 $99
Hydraulic cylinder (2 ½"x 8") 3 000 psi S14-1011-30 $43
Telescopic gap rod (manual) IN REPLACEMENT OF HYDRAULIC CYLINDER 29-0850 $0
Accessories INCLUDED in the price of the kit
OPTIONAL accessories to add to the price of the kit
Effective April 1st, 2018 US$ Price List 218-770-5473 TNA Sales and Distribution
20
US$ 2018
TELESCOPIC CHUTE PART # PRICE (extra) Hydraulic telescopic chute, mounted cylinder and chute rotation by hyd. motor SCHUT-01 $2 668
LIGHTS FOR TELESCOPIC CHUTE EN-CHU-I07 PART # PRICE
Left side light for telescopic chute (with support, wire not included) 29-1697-87 $290
Right side light for telescopic chute (with support, wire not included) 29-1697-88 $290
PTO SHAFT 1 3/8 – 6 splines snowblower side 1 3/8 – 6 splines tractor side
PART #
PRICE (extra)
T80 assembly like a T60 (bigger) For N86-280H @ N86-282HTR & N92-280H SPTO-T80/T60 $314
SKID SHOES & BLADES KITS Hardness level of material 1 being the hardest & 3 the softness. PART # PRICE Carbon steel (2)
All blades & skid shoes installed on all snowblowers are made with carbon steel.
–
Included
Stainless steel (2)
N86-280H @ N86-282HTR SCPI86H $593 N92-280H, N92-280HD, N92-280HDTR SCPI92H $603 N98-280H SCPI98H $611
Hardox 450
(1)
N86-280H @ N86-282HTR SCPH86H $227 N92-280H, N92-280HD, N92-280HDTR SCPH92H $227 N98-280H SCPH98H $227
Tivar 88
(3)
N86-280H @ N86-282HTR SCPT86H $683 N92-280H, N92-280HD, N92-280HDTR SCPT92H $708 N98-280H SCPT98H $708
Blades & skid shoes wear not covered by the warranty
LATERAL BLADES N86-280H @ N92-280H PART # PRICE
For N86-280H & N86-280HTR, N92-280H, N92-280HD, N92-280HDTR, N98-280H Set of fixed lateral blades (left & right) (46'' height, 4'' width)
29-0327
$295
For N86-281H @ N86-282HTR Set of fixed lateral blades (left & right) (55 ½'' height, 4'' width)
29-1318
$320
HYDRAULIC ICE RIPPER N86-280H TO N98-280H PART # PRICE For N86-280H to N98-280H 84’’ Hydraulic ice ripper including 1 hyd. cylinder 2 ½’’ x 8’’ and hoses
For pictures and aditionnal informations see page 12
29-6900
$1 918
OPTIONAL accessories to add to the price of the kit (suite) NB : An «S» before the part number means that extra costs have to be added to the base price for the replacement of the original part.
Effective April 1st, 2018 US$ Price List 218-770-5473 TNA Sales and Distribution
21
US$ 2018
HOSES KIT WITH CONNECTORS – NOT INSTALLED PART # PRICE For N86-280H @ N92-280H, with semi industrial chute, 2 hydraulic functions 14-2100-01 $301 For N92-280HD & N98-280H with semi industrial chute, 2 hydraulic functions 14-2100-01 $301 For N86-280HTR @ N86-282HTR with semi industrial chute, 3 hydraulic functions 14-2100-06 $382 For N92-280HDTR with semi industrial chute, 3 hydraulic functions 14-2100-02 $387 For N86-280H @ N92-280H, N98-280H with telescopic chute, 3 hydraulic functions 14-2100-30 $453 For N86-280HTR @ N86-282HTR with telescopic chute, 4 hydraulic functions 14-2100-31 $530 For N92-280HDTR with telescopic chute, 4 hydraulic functions 14-2100-32 $530
ASSEMBLY PART # NET PRICE
Assembly N86-280H @ N92-280HDTR, N98-280H Gear for chute, chute, 3-pts, rotation, cylinder,motor for rotary drum and hoses if ordered For complete details, see Page 2
AS-N280
$281
Assembly of the hydraulic ice ripper on the snowblower (N86-280H to N98-280H) ** offered only when assembly of snowblower is also choose
AS-PG
$118
SPECIAL COLORS (ordered before fabrication) MODELS PRICE
Surfacer epoxy, urethane painting (black, blue, green, orange, yellow ind.)
N86-280H @ N92-280HDTR, N98-280H
$165
NB : No cancellation of special color will be accepted.
REDUCER BOXES (recommended for tractor of 100 HP PTO and more)
PART #
PRICE
For N86-280 @ N92-280H Box reducer with 3 gears (175HP) 1000 @ 540RPM & reducer/reverser (225HP) 1 ¾ - 20 splines, including mounting kit and adaptor
SBR-200-280
$3 175
For N92-280HD, N92-280HDTR, N98-280H Box reducer with 3 gears (175HP) 1000 @ 540RPM & reducer/reverser (225HP) 1 ¾ - 20 splines, including mounting kit
SBR-200
$3 000
For all models of boxes reducer or accelerator, specifications & prices, see pages 50 to 52.
OPTIONAL accessories to add to the price of the kit (suite) NB : An «S» before the part number means that extra costs have to be added to the base price for the replacement of the original part.
US$ 2018
1 auger only (LP)
1 or 2 augers
1 auger only (LP)
NORMAND N86-280H N86-280HTR
N86-282H N86-282HTR
N92-280H N92-280HD
N92-280HDTR
N98-280H
Recommended horsepower (HP PTO) 60 @ 85 60 @ 85 60 @ 85 75 @ 120 75 @ 120
Cutting width 86" 86" 92'' 92'' 98" Cutting height 36" 41" 36'' 36'' 36'' Impeller RPM 540 540 540 540 540 Impeller diameter 28 ½" 28 ½" 28 ½’’ 28 ½'' 28 ½" Impeller depth 12'' 12'' 12'' 12'' 12'' Number of blades 4 4 4 4 4 Impeller shaft diameter 1 9/16" 1 9/16" 1 9/16" 2'' 2" Balanced impeller Std Std Std Std Std Drum center height 17 ¾'' 17 ¾'' 17 ¾'' 17 ¾’’' 17 ¾'' Removable rotary drum - / Std - / Std - - / Std - Cylinder for chute (deflector) 2 ½" X 8" 2 ½" X 8" 2 ½" X 8" 2 ½" X 8" 2 ½" X 8" Chute rotation by hydraulic motor (gear with Std Std Std Std Std Manual deflector Opt. Opt. Opt. Opt. Opt. Hydraulic deflector Std Std Std Std Std Semi industrial chute (2 deflectors) Std Std Std Std Std Hydraulic telescopic chute Opt. Opt. Opt. Opt. Opt. Hoses holder Std Std Std Std Std Main auger diameter 23" 23" 23'' 23" 23" Upper auger diameter - 13" - - - Balanced auger Std Std Std Std Std Revesible carbon steel blade Std Std Std Std Std Reversible Hardox 450 blade Opt. Opt. Opt. Opt. Opt. Reversible stainless steel blade Opt. Opt. Opt. Opt. Opt. Tivar blade Opt. Opt. Opt. Opt. Opt. Lateral blades Opt. Opt. Opt. Opt. Opt. Adjustable carbon steel skid shoes Std Std Std Std Std Adjustable Hardox 450 skid shoes Opt. Opt. Opt. Opt. Opt. Adjustable stainless steel skid shoes Opt. Opt. Opt. Opt. Opt. Adjustable Tivar skid shoes Opt. Opt. Opt. Opt. Opt. Storage foot Std Std Std Std Std Driving chain number 80 80 80 80 80 Number of safety bolts 2 2 2 3 3 Bearing ductile iron casing Std Std Std Std Std Shaft P.T.O. standard T60 T60 T60 T80 T80 1 000 @ 540 reducer box Opt. Opt. Opt. Opt. Opt. Adjustable hitch Std Std Std Std Std Hitch category (QH = quick hitch) 2, QH 2, QH 2, QH 2, QH 2, QH
Approx. weight (lb) - 1 auger 1 387 1 522
1 461 1 596 1 414 1 630
1 669 1 669
• The weight does not include chute and accessories. Prices and specifications are subject to change without notice
22
Effective April 1st, 2018 US$ Price List TNA Sales and Distribution 218-770-5473
US$ 2018
Effective April 1st, 2018 US$ Price List 218-770-5473 TNA Sales and Distribution
23
Each kit includes: PTO shaft Semi industrial chute, Hydraulic motor with cushion valve and support for chute rotation Gear for chute rotation Hydraulic cylinder for chute deflector Carbon steel skid shoes and cutting edge Complete hoses holder Hydraulic motor with cushion valve for rotary drum (TR) (if required)
MODELS AND PRICE OF KITS 85 @ 140 HP
N92-310H N92-311H N92-312H N98-310H N98-311H N98-312H $11,805 $12,479 $13,378 $12,254 $12,714 $13,618
N92-310HTR N92-311HTR N92-312HTR N98-310HTR N98-311HTR N98-312HTR $13,765 $14,219 $15,128 $13,933 $14,385 $15,288
PTO SHAFT 1 ¾ - 20 splines snowblower side 1 3/8 – 6 splines tractor side
PART #
PRICE
PTO T80 for N92-310H @ N92-312HTR et N98-310H @ N98-312HTR 06-0001 Included
SEMI INDUSTRIAL CHUTE PART # PRICE Semi Industrial with one flat deflector and one rounded deflector 29-1792 included
CHUTE ROTATION PART # PRICE For N92-310H @ N92-312HTR & N98-310H @ N98-312HTR Hydraulic motor with chromed shaft and cushion valve and support 29-1923 Included
Gear for the chute 29-1908 Included
CHUTE DEFLECTOR ACTION PART # PRICE
Hydraulic cylinder (2 ½"x 8") 2 500 psi 14-1011 Included
ROTARY DRUM ON MODELS N92-310HTR @ N98-312HTR PART # PRICE
Hydraulic motor with chromed shaft and cushion valve 14-8206-25 Included
OPTIONS FOR SEMI INDUSTRIAL CHUTE 29-1792 PART # PRICE Anti fog removable front panel 29-1792-60 $99
Hydraulic cylinder (2 ½"x 8") 3 000 psi S14-1011-30 $43
Telescopic gap rod (manual) IN REPLACEMENT OF HYDRAULIC CYLINDER 29-0850 $0
Accessories INCLUDED in the price of the kit
OPTIONAL accessories to add to the price of the kit NB : An «S» before the part number means that extra costs have to be added to the base price for the replacement of the original part.
US$ 2018
Effective April 1st, 2018 US$ Price List 218-770-5473 TNA Sales and Distribution
24
82
CE 90
90
68 85 87 39 (extra) 39 43
05 05
(extra)
95
20
Blades & skid shoes wear not covered by the warranty
OPTIONAL accessories to add to the price of the kit (suite) NB : An «S» before the part number means that extra costs have to be added to the base price for the replacement of the original part.
TELESCOPIC CHUTE PART # PRI CE Hydraulic telescopic chute, mounted cylinder and chute rotation by hyd. motor SCHUT-02 $2 4
LIGHTS FOR TELESCOPIC CHUTE EN-CHU-I05 PART # PRI
Left side light for telescopic chute (with support, wire not included) 29-16 97-87
$
Right side light for telescopic chute (with support, wire not included) 29-16 97-88
$
PTO SHAFT 1 ¾ - 20 splines snowblower side 1 3/8 – 6 splines tractor side
Without reducer box PART # PRICE
(extra)
V80 multilobes SPTO-V80 $3 85 T90 bigger SPTO-T90 $5 87 V90 bigger and multilobes SPTO-V90 $7 39 PTO SHAFT 1 ¾ - 20 splines snowblower side 1 3/8 - 21 splines tractor side
With reducer box PART # PRICE
(extra)
T80 SPTO-T80RED $
V80 . multilobes SPTO-V80RED
$
T90 . bigger SPTO-T90RED
$
V90 . bigger and multilobes SPTO-V90RED
$
FULL FLIGHT AUGER replacement for main auger PART # PRICE For N92-310H @ N92-312HTR Full flight auger (each) SVP-92 $1
For N98-310H @ N98-312HTR Full flight auger (each) SVP-98 $1
Hardox 450 TEETH on full flight auger PART # PRICE (extra) For N92-310H @ N92-312HTR On full flight auger (for 1 auger) SDH-92 $
For N98-310H @ N98-312HTR On full flight auger (for 1 auger) SDH-98 $
SKID SHOES & BLADES KITS
Hardness level of material 1 being the hardest & 3 the softness. PART # PRICE
Carbon steel (2) All blades & skid shoes installed on all snowblowers are made with carbon steel.. – Included
Stainless steel (2) N92-310H @ N92-312HTR SCPI 92H $6 03
N98-310H @ N98-312HTR SCPI 98H $6 11
Hardox 450 (1) N92-310H @ N92-312HTR SCPH92H $2 27
N98-310H @ N98-312HTR SCPH98H $2 27
Tivar 88 (3) N92-310H @ N92-312HTR SCPT92H $7 08
N98-310H @ N98-312HTR SCPT98H $7 08 LATERAL BLADES PART # PRI CE For N92-310H & N98-310H Set of fixed lateral blades (left & right) (46'' height, 4'' width) 29-0 327
$
For N92-311H @ N92-312HTR, N98-311H @ N98-312HTR Set of fixed lateral blades (left & right) (55 ½'' heigth, 4'' width) 29-1 318
$
US$ 2018
Effective April 1st, 2018 US$ Price List 218-770-5473 TNA Sales and Distribution
25
NB : An «S» before the part number means that extra costs have to be added to the base price for the replacement of the original part. HYDRAULIC ICE RIPPER N92-310H to N98-312HTR PART # PRICE For N92-310H to N92-312HTR 84’’ Hydraulic ice ripper including 1 hyd. cylinder 2 ½’’ x 8’’ and hoses For pictures and aditionnal informations see page 12
29-7900
$1 918
For N98-310H to N98-312HTR 96’’ Hydraulic ice ripper including 1 hyd. cylinder 2 ½’’ x 8’’ and hoses For pictures and aditionnal informations see page 12
29-8900
$1 936
HOSES KIT WITH CONNECTORS – NOT INSTALLED PART # PRICE For N92-310H, N92-312H, N98-310H, N98-312H with semi industrial chute, 2 hydraulic functions 14-2100-01 $301
For N92-311HTR, N92-312HTR, N98-311HTR, N98-312HTR with semi industrial chute, 3 hydraulic functions 14-2100-02 $387
For N92-310H, N92-312H, N98-310H, N98-312H with telescopic chute 3 hydraulic functions 14-2100-30 $453
For N92-311HTR, N92-312HTR, N98-311HTR, N98-312HTR with telescopic chute 4 hydraulic functions 14-2100-32 $530
ASSEMBLY PART # NET PRICE Assembly N92-310H @ N112-342HTR Gear for chute, chute, 3-points, rotation, hydraulic motor for rotary drum and hoses if ordered For complete details, see page 2
AS-N310-342
$315
Assembly of the hydraulic ice ripper on the snowblower (N92-310H to N98-312HTR) ** offered only when assembly of snowblower is also choose
AS-PG
$118
SPECIAL COLORS (ordered before fabrication) MODELS PRICE Surfacer epoxy, urethane painting (black, blue, green, orange, yellow ind.)
N92-310H @ N98-312HTR
$188
NB : No cancellation of special color will be accepted.
REDUCER BOXES (recommended for tractor of 100 HP PTO and more) PART # PRICE
Pour N92-310H @ N98-312HTR Box reducer with 3 gears (175HP) 1000 @ 540RPM & reducer/reverser (225HP) 1 ¾ - 20 splines, including mounting kit
SBR-200
$3 000
For all models of boxes reducer or accelerator, specifications & prices, see pages 50 to 52.
OPTIONAL accessories to add to the price of the kit (suite)
Effective April 1st, 2018 US$ Price List 218-770-5473 TNA Sales and Distribution
26
US$ 2018
Each kit includes: PTO shaft Semi industrial chute, Hydraulic motor with cushion valve and support for chute rotation Gear for chute rotation Hydraulic cylinder for chute deflector Carbon steel skid shoes and cutting edge Complete hoses holder Hydraulic motor with cushion valve for rotary drum (TR) (if required)
MODELS AND PRICE OF KITS 100 @ 160 HP
N98-340H N102-340H $12,992 $13,102
N98-341H N102-341H N112-341H $13,269 $13,389 $14,240
N98-341HTR N102-341HTR N112-341HTR $15,018 $15,143 $15,936
N98-342H N102-342H N112-342H $14,159 $14,279 $15,133
N98-342HTR N102-342HTR N112-342HTR $15,907 $16,032 $16,823
PTO SHAFT 1 ¾ - 20 splines snowblower side 1 3/8 – 6 spline tractor side
PART #
PRICE
PTO T80 For N98-340H @ N112-342HTR 06-0001 Included
SEMI INDUSTRIAL CHUTE PART # PRICE Semi industrial chute with one flat deflector and one rounded deflector 29-1792 included CHUTE ROTATION PART # PRICE For N98-340H @ N112-342HTR Hydraulic motor with chromed shaft and cushion valve and support 29-1923 Included
Gear for the chute 29-1908 Included
CHUTE DEFLECTOR ACTION PART # PRICE Hydraulic cylinder (2 ½"x 8") 2 500 psi 14-1011 Included
ROTARY DRUM ON MODELS N98-341HTR @ N112-342HTR PART # PRICE Hydraulic motor with chromed shaft and cushion valve 14-8206-25 Included
OPTIONAL accessories to add to the price of the kit NB : An «S» before the part number means that extra costs have to be added to the base price for the replacement of the original part. OPTIONS FOR SEMI INDUSTRIAL CHUTE 29-1792 PART # PRICE
Anti fog removable front panel 29-1792-60 $99
Hydraulic cylinder (2 ½"x 8") 3 000 psi S14-1011-30 $43
Telescopic gap rod (manual) IN REPLACEMENT OF HYDRAULIC CYLINDER 29-0850 $0
Accessories INCLUDED in the price of the kit
Effective April 1st, 2018 US$ Price List 218-770-5473 TNA Sales and Distribution
27
US$ 2018 OPTIONAL accessories to add to the price of the kit (suite)
NB : An «S» before the part number means that extra costs have to be added to the base price for the replacement of the original part.
TELESCOPIC CHUTE PART # PRICE Hydraulic telescopic chute, mounted cylinder and chute rotation by hyd. motor SCHUT-02 $2 481
LIGHTS FOR TELESCOPIC CHUTE EN-CHU-I05 PART # PRICE Left side light for telescopic chute (with support, wire not included) 29-1697-87 $290
Right side light for telescopic chute (with support, wire not included) 29-1697-88 $290 PTO SHAFT 1 ¾ - 20 splines snowblower side 1 3/8 – 6 splines tractor side
PART # PRICE (extra)
V80 multilobes SPTO-V80 $385 T90 bigger SPTO-T90 $587 V90 bigger and multilobes SPTO-V90 $739 PTO SHAFT 1 ¾ - 20 splines snowblower side 1 3/8 - 21 splines tractor side
PART # PRICE (extra)
T80 SPTO-T80RED $168 V80 multilobes SPTO-V80RED $385 T90 bigger SPTO-T90RED $587 V90 bigger and multilobes SPTO-V90RED $739 FULL FLIGHT AUGER replacement for main auger PART # PRICE (extra) For N98-340H @ N98-342HTR Full flight auger (each) SVP-98 $1 443 For N102-340H @ N102-342HTR Full flight auger (each) SVP-102 $1 543 For N112-341H @ N112-342HTR Full flight auger (each) SVP-112 $1 660 Hardox 450 TEETH on full flight auger PART # PRICE (extra) For N98-340H @ N98-342HTR On full flight auger (for 1 auger) SDH-98 $605 For N102-340H @ N112-342HTR On full flight auger (for 1 auger) SDH-102 $605
SKID SHOES & BLADES KITS Hardness level of material 1 being the hardest & 3 the softness PART # PRICE (extra)
Carbon steel (2) All blades & skid shoes installed on all snowblowers are made with carbon steel.
Stainless steel (2)
Hardox 450 (1)
Tivar 88 (3)
N98-340H @ N98-342HTR SCPI98-342H $613 N102-340H @ N102-342HTR SCPI102H $630 N112-341H @ N112-342HTR SCPI112H $652 N98-340H @ N98-342HTR SCPH98-342H $227 N102-340H @ N102-342HTR SCPH102H $227 N112-341H @ N112-342HTR SCPH112H $227 N98-340H @ N98-342HTR SCPT98-342H $706 N102-340H @ N102-342HTR SCPT102H $764 N112-341H @ N112-342HTR SCPT112H $764
Without reducer box
With reducer box
- Included
Effective April 1st, 2018 US$ Price List 218-770-5473 TNA Sales and Distribution
28
US$ 2018 OPTIONAL accessories to add to the price of the kit (suite)
NB : An «S» before the part number means that extra costs have to be added to the base price for the replacement of the original part.
LATERAL BLADES PART # PRICE For N98-340H & N102-340H Set of fixed lateral blades (left & right) (46'' height, 4'' width) 29-0327 $295
For N98-341H @ N112-342HTR Set of fixed lateral blades (left & right) (55 ½'' height, 4'' width)
29-1318
$320
Blades & skid shoes wear not covered by the warranty
HYDRAULIC ICE RIPPER N98-340H to N112-342HTR PART # PRICE For N98-340H to N112-342HTR 96’’ Hydraulic ice ripper including 1 hyd. cylinder 2 ½’’ x 8’’ and hoses For pictures and aditionnal informations see page 12
29-8900
$1 936
HOSES KIT WITH CONNECTORS – NOT INSTALLED PART # PRICE For N98-340H @ N112-342H with semi industrial chute, 2 hydraulic functions 14-2100-01 $301
For N98-341HTR @ N112-342HTR with semi industrial chute, 3 hydraulic functions 14-2100-02 $387
For N98-340H @ N112-342H with telescopic chute, 3 hydraulic functions 14-2100-30 $453
For N98-341HTR @ N112-342HTR with telescopic chute, 4 hydraulic functions 14-2100-32 $530
ASSEMBLY PART # NET PRICE Assembly N98-340H @ N112-342HTR Gear for chute, chute, 3-points, rotation, hydraulic motor for rotary drum and hoses if ordered For complete details see page 2
AS-N310-342
$315
Assembly of the hydraulic ice ripper on the snowblower (N92-340H to N112-342HTR) ** offered only when assembly of snowblower is also choose
AS-PG
$118
SPECIAL COLORS (ordered before fabrication) MODELS PRICE
Surfacer epoxy, urethane painting (black, blue, green, orange, yellow ind.)
N98-340H @ N112-342HTR
$188
NB : No cancellation of special color will be accepted.
REDUCER BOXES (recommended for tractor of 100 HP PTO and more)
PART #
PRICE
Box reducer with 3 gears (175HP) 1000 @ 540RPM & reducer/reverser (225HP) 1 ¾ - 20 splines, including mounting kit
SBR-200
$3 000
For all models of boxes reducer or accelerator, specifications & prices, see pages 50 to 52
US$ 2018 1 auger only
(LP) 1 or 2 augers 1 auger only (LP) 1 or 2 augers
NORMAND N92-310H N92-310HTR
N92-312H N92-312HTR
N98-310H N98-310HTR
N98-340H N102-340H N98-312H
N98-312HTR N98-342H
N98-342HTR N102-342H
N102-342HTR N112-342H
N112-342HTR
Recommended horsepower (HP PTO) 85 @ 140 85 @ 140 85 @ 140 100 @ 160 100 @ 160 85 @ 140 100 @ 160 100 @ 160 100 @ 160
Cutting width 92'' 92" 98" 98’’ 102'' 98" 98" 102'' 112'' Cutting height 38'' 41 ½'' 38'' 41 1/8'' 41 1/8'' 41 ½'' 48'' 48'' 48'' Impeller RPM 540 540 540 540 540 540 540 540 540 Impeller diameter 31'' 31" 31" 34'' 34'' 31" 34" 34" 34" Impeller depth 14 ¼'' 14 ¼'' 14 ¼'' 14 ¼'' 14 ¼'' 14 ¼'' 14 ¼'' 14 ¼'' 14 ¼'' Number of blades 5 5 5 5 5 5 5 5 5 Impeller shaft diameter 2" 2" 2" 2'' 2'' 2" 2" 2" 2'' Balanced impeller Std Std Std Std Std Std Std Std Std Drum center height 19 ½'' 19 ½'' 19 ½'' 21'' 21'' 19 ½'' 22" 22" 22'' Removable rotary drum - / Std - / Std - / Std - - - / Std - / Std - / Std - / Std Cylinder for chute (deflector) 2 ½" X 8" 2 ½" X 8" 2 ½" X 8" 2 ½" X 8" 2 ½" X 8" 2 ½" X 8" 2 ½" X 8" 2 ½" X 8" 2 ½" X 8" Chute rotation by hydraulic motor (gear with Std Std Std Std Std Std Std Std Std Manual deflector Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Hydraulic deflector Std Std Std Std Std Std Std Std Std Semi industrial chute (2 deflectors) Std Std Std Std Std Std Std Std Std Hydraulic telescopic chute Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Hoses holder Std Std Std Std Std Std Std Std Std Main auger diameter 23" 23" 23" 23'' 23'' 23" 23" 23" 23" Upper auger diameter - 13" - - - 13'' 17" 17" 17" Balanced auger Std Std Std Std Std Std Std Std Std Revesible carbon steel blade Std Std Std Std Std Std Std Std Std Reversible Hardox 450 blade Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Reversible stainless steel blade Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Tivar blade Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Lateral blades Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Adjustable carbon steel skid shoes Std Std Std Std Std Std Std Std Std Adjustable Hardox 450 skid shoes Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Adjustable stainless steel skid shoes Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Adjustable Tivar skid shoes Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Storage foot Std Std Std Std Std Std Std Std Std Driving chain number 80 80 80 100 100 80 100 100 100 Number of safety bolts 3 3 3 3 3 3 3 3 3 Bearing ductile iron casing Std Std Std Std Std Std Std Std Std Shaft P.T.O. standard T80 T80 T80 T80 T80 T80 T80 T80 T80 1 000 @ 540 reducer box Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Adjustable hitch Std Std Std Std Std Std Std Std Std Hitch category (QH = quick hitch) 2, QH 2, QH 2, QH 2, QH 2, QH 2, QH 2, QH 2, QH 2, QH
Approx. weight (lb) - 1 auger 1 753 / 1 952 1 797 1 969
1 883 2 073 1 976 2 001 1 914
2 107 2 048 2 193
2 071 2 215
2 175 2 320
• The weight does not include chute and accessories. Specifications are subject to change without notice
.
29
Effective April 1st, 2018 US$ Price List TNA Sales and Distribution 218-770-5473
US$ 2018
Effective April 1st, 2018 US$ Price List 218-770-5473 TNA Sales and Distribution
30
HE+ Series Normand snowblower with Essa+ scraper blade
Created and developed by a snow removal company, the scraper blade Essa + patented and used since 2002, added to a Normand snowblower is an evolved, complete and versatile tool.
The snowblower of the E+ serie keep the same specifications as the Normand snowblowers H series making it the fastest, most effective, robust, high performance snow removal tool on the market.
The Essa + scraper blade consists of Hardox 450 steel offering light weight, strength and excellent durability. Its 2 points of articulation are greasable, robust and durable.
The Essa + scraper blade is powered by two cylinders that can move down the scraper blade and raise the blower 7 ½ '' when the scraper blade is lowered to the maximum.
The cylinders are positioned so that they optimize the strength, the robustness and the durability of these and points of articulation.
Deployed to the front of the snowblower, the scraper blade Essa + is the only one making it possible to pick up the snow further ahead and avoiding to leave piles of undesired snow in front of garage doors or other obstacles.
The scraper blade deployed also allows you to start forward without delay, increasing your speed of execution while providing a better quality of surface cleaning and better service
The scraper blade, in the raised position, allows the use of the snowblower its full cutting height (for snow blowers 1 auger). The scraper blade is easily removable. The body of the scraper can be removed simply by removing two attachment pins. Therefore the snowblower may be used conventionally.
Of series, rubber blades are fixed over the entire width of the scraper and along the sides. The very resistant rubber protects the asphalt and pavement streaks and traces of rust and also offers an incomparable quality of surface cleaning.
THE BEST QUALITY AT THE BEST PRICE!
Model shown : N98-342HE+
US$ 2018
Effective April 1st, 2018 US$ Price List 218-770-5473 TNA Sales and Distribution
31
MODELS AND PRICE OF KITS HE+ Series Normand snowblower with Essa+ scraper blade
40 @ 75 60 @ 85 75 @ 120 85 @ 140 100 @ 160
N78-260HE+ N86-280HE+ N92-280HDE+ N92-310HE+ N98-341HE+
$12,786 $14,318 $15,725 $17,217 $18,738 N98-342HE+
$19,628
Each kit includes: • H series snowblower • Essa+ scraper blade • PTO shaft, • Semi industrial chute • Hydraulic motor with cushion valve and support for chute rotation • Gear for the chute • Hydraulic cylinder for chute deflector • Carbon steel skid shoes and cutting edge • Complete hoses holder • Two lifting hydraulic cylinder • Hoser from the cylinder to the « T » connector • Rubber main and lateral blades
Accessories INCLUDED in the price of the kit PTO SHAFT
1 3/8 – 6 splines snowblower side 1 3/8 – 6 splines tractor side
PART #
PRICE
PTO T60 For N78-26HE+, N86-280HE+ 06-0015 Included PTO SHAFT 1 ¾ - 20 splines snowblower side 1 3/8 – 6 splines tractor side
PART #
PRICE
PTO T80 For N92-280HDE+, N92-310HE+, N98-341HE+, N98-342HE 06-0001 Included
SEMI INDUSTRIAL CHUTE for N78-260HE+ PART # PRICE
Semi industrial chute with one flat deflector and one rounded deflector 29-3799 Included
SEMI INDUSTRIAL CHUTE for N86-280HE+, N92-280HDE+ PART # PRICE Semi industrial chute with one flat deflector and one rounded deflector 29-0798 Included SEMI INDUSTRIAL CHUTE for N92-310HE+, N98-341HE+, N98-342HE+ PART # PRICE Semi industrial chute with one flat deflector and one rounded deflector 29-1792 Included CHUTE ROTATION PART # PRICE For chute 29-3799 Hydraulic motor with chromed shaft and cushion valve and support 29-4942 Included
For chute 29-0798 Hydraulic motor with chromed shaft and cushion valve and support Gear for the chute
29-1923 29-0908
Included Included
For chute 29-1792 Hydraulic motor with chromed shaft and cushion valve and support Gear for the chute
29-1923 29-1908
Included Included
US$ 2018
Effective April 1st, 2018 US$ Price List 218-770-5473 TNA Sales and Distribution
32
CHUTE DEFLECTOR ACTION PART # PRICE For chute 29-3799 Hydraulic cylinder (2’’ x 6’’) 2 500 psi 14-1016 Included For chute 29-0798 & 29-1792 Hydraulic cylinder (2 ½"x 8") 2 500 psi 14-1011 Included
OPTIONAL accessories to add to the price of the kit NB : An «S» before the part number means that extra costs have to be added to the base price for the replacement of the original part. OPTIONS FOR SEMI INDUSTRIAL CHUTE PART # PRICE
For chute 29-3799 Anti fog removable front panel 29-3799-60 $99
For chute 29-0798 Anti fog removable front panel 29-0798-60 $99
For chute 29-1792 Anti fog removable front panel 29-1792-60 $99
For chute 29-3799 Hydraulic cylinder (2’’ x 6’’) 3 000 psi (with flow reducer) S14-1016-HD $34
For chute 29-0798 & 29-1792 Hydraulic cylinder (2 ½"x 8") 3 000 psi S14-1011-30 $43
Telescopic gap rod (manual) IN REPLACEMENT OF HYDRAULIC CYLINDER 29-0850 $0
TELESCOPIC CHUTE for N86-280HE+, N92-280HDE+ PART # PRICE
Hydraulic telescopic chute including mounted cylinder and rotation kit SCHUT-01 $2 668
TELESCOPIC CHUTE for N92-310HE+, N98-341HE+, N98-342HE+ PART # PRICE
Hydraulic telescopic chute including mounted cylinder and rotation kit SCHUT-02 $2 482
LIGHTS FOR TELESCOPIC CHUTE PART # PRICE
Left side light for telescopic chute (with support, wire not included) 29-1697-87 $290
Right side light for telescopic chute (with support, wire not included) 29-1697-88 $290 PTO SHAFT 1 3/8 – 6 splines snowblower side 1 3/8 – 6 splines tractor side
PART #
PRICE (extra)
T80 assembly like a T60 (bigger) For N78-260HE+, N86-280HE+ SPTO-T80/T60 $314 PTO SHAFT 1 ¾ - 20 splines snowblower side Without reducer box 1 3/8 – 6 splines tractor side
PART #
PRICE (extra)
V80 multilobes for N92-280HDE+, N92-310HE+, N98-341HE+, N98-342HE+ SPTO-V80 $385 T90 bigger for N92-280HDE+, N92-310HE+, N98-341HE+, N98-342HE+ SPTO-T90 $587 V90 bigger and multilobes for N92-280HDE+, N92-310HE+, N98-341HE+,
N98-342HE+ SPTO-V90 $739
PTO SHAFT 1 ¾ - 20 splines snowblower side With reducer box 1 3/8 - 21 splines tractor side
PART #
PRICE (extra)
T80 For N92-280HDE+, N92-310HE+, N98-341HE+, N98-342HE+ SPTO-T80RED $168 V80 multilobes For N92-280HDE+, N92-310HE+, N98-341HE+, N98-342HE+ SPTO-V80RED $385 T90 Bigger for N92-280HDE+, N92-310HE+, N98-341HE+, N98-342HE+ SPTO-T90RED $587 V90 Bigger & multilobes for N92-280HDE+, N92-310HE+, N98-341HE+,
N98-342HE+ SPTO-V90RED $739
Accessories INCLUDED in the price of the kit (suite)
US$ 2018
Effective April 1st, 2018 US$ Price List 218-770-5473 TNA Sales and Distribution
33
FULL FLIGHT AUGER replacement for main auger PART # PRICE (extra) For N92-310HE+ Full flight auger (each) SVP-92 $1 339 For N98-341HE+, N98-342HE+ Full flight auger (each) SVP-98 $1 443 Hardox 450 TEETH on full flight auger PART # PRICE (extra) For N92-310HE+ On full flight auger (for one) SDH-92 $605 For N98-341HE+, N98-342HE+ On full flight auger (for one) SDH-98 $605
SKID SHOES & BLADES KITS Hardness level of material 1 being the hardest & 3 the softness PART # PRICE (extra)
Carbon steel (2) All blades & skid shoes installed on all
snowblowers are made with carbon steel
-
Included
Stainless (2)
N78-260HE+ SCPI78H $422 N86-280HE+ SCPI86H $593 N92-280HDE+, N98-310HE+ SCPI92H $590 N98-341HE+, N98-342HE+ SCPI98-342H $613
Hardox 450
(1)
N78-260HE+ SCPH78H $197 N86-280HE+ SCPH86H $227 N92-280HDE+, N98-310HE+ SCPH92H $227 N98-341HE+, N98-342HE+ SCPH98-342H $227
Tivar 88
(3)
N78-260HE+ SCPT78H $760 N86-280HE+ SCPT86H $697 N92-280HDE+, N98-310HE+ SCPT92H $708 N98-341HE+, N98-342HE+ SCPT98-342H $706
Blades & skid shoes wear not covered by the warranty
HYDRAULIC ICE RIPPER N86-280HE+ to N98-342HE+ PART # PRICE
For N86-280HE+, N92-280HDE+ 84’’ Hydraulic ice ripper including 1 hyd. cylinder 2 ½’’ x 8’’ and hoses For pictures and aditionnal informations see page 12
29-6900
$1 918
For N92-310HE+ 84’’ Hydraulic ice ripper including 1 hyd. cylinder 2 ½’’ x 8’’ and hoses For pictures and aditionnal informations see page 12
29-7900
$1 918
For N98-341HE+, N98-342HE+ 96’’ Hydraulic ice ripper including 1 hyd. cylinder 2 ½’’ x 8’’ and hoses For pictures and aditionnal informations see page 12
29-8900
$1 936
HOSES KIT WITH CONNECTORS – NOT INSTALLED PART # PRICE For N78-260HE+, with semi industrial chute, 2 hydraulic functions 14-2100-03 $286 For N86-280HE+, N92-280HDE+, N92-310HE+, N98-341HE+, N98-342HE+ with semi industrial chute, 2 hydraulic functions 14-2100-01 $301
For N86-280HE+, N92-280HDE+, N92-310HE+, N98-341HE+, N98-342HE+ With telescopic chute, 3 hydraulic functions
14-2100-30
$453
For Essa+ scraper blade N78-260HE+, N86-280HE+, N92-280HDE+, N92-310HE+, N98-341HE+, N98-342HE+ From «T» connector to the tractor
14-2100-39
$138
OPTIONAL accessories to add to the price of the kit (suite) NB : An «S» before the part number means that extra costs have to be added to the base price for the replacement of the original part.
US$ 2018
Effective April 1st, 2018 US$ Price List 218-770-5473 TNA Sales and Distribution
34
OPTIONAL accessories to add to the price of the kit (suite) NB : An «S» before the part number means that extra costs have to be added to the base price for the replacement of the original part.
SPECIAL COLORS (ordered before fabrication) MODELS PRICE
Surfacer epoxy, urethane painting (black, blue, green, orange, yellow N78-260HE+, N86-280HE+,
ind.) N92-280HDE+, N92-310HE+, N98-341HE+ N98-342HE+
$188
NB : No cancellation of special color will be accepted.
REDUCER BOXES (recommended for tractor of 100 HP PTO and more)
PART #
PRICE
Box reducer with 3 gears (175HP) 1000 @ 540RPM & reducer/reverser (225H 1 ¾ - 20 splines, including mounting kit
P) SBR-200
$3 000
For all models of boxes reducer or accelerator, specifications & prices, see pages 50 to 52.
Model shown : N98-342HE+
ASSEMBLY
Assembly N78-260HE+ Gear for chute, chute, 3-pts, rotation and hoses if ordered For complete details see page 2
Assembly N86-280HE+, N92-280HDE+ Gear for chute, chute, 3-pts, rotation and hoses if ordered For complete details see page 2 Assembly N92-310HE+, N98-341HE+, N98-342HE+ Gear for chute, chute, 3-pts, rotation, and hoses if ordered For complete details see page 2
Assembly of the hydraulic ice ripper on the snowblower ** offered only when assembly of snowblower is also choose
PART # NET PRICE
AS-N240-260 $271
AS-N280 $281
AS-N310-342 $315
AS-PG $118
US$ 2018
Effective April 1st, 2018 US$ Price List 218-770-5473 TNA Sales and Distribution
35
1 auge r 1 or 2 augers
SNOWBLOWERS WITH ESSA+ SCRAPER BLADES
N78-260HE+
N86-280HE+
N92-280HDE+
N92-310HE+ N98-341HE+
N98-342HE+ Recommended horsepower (HP PTO) 40 @ 75 60 @ 85 75 @ 120 85 @ 140 100 @ 160
Cutting width 78’’ 86" 92'' 92'' 98" Overall width 82’’ 90’’ 96’’ 96’’ 102’’ Cutting height 32 ½’’ 36" 36'' 38'' 48'' Impeller RPM 540 540 540 540 540 Impeller diameter 26’’ 28 ½" 28 ½'' 31'' 34" Impeller depth 11’’ 12'' 12'' 14 ¼'' 14 ¼'' Number of blades 4 4 4 5 5 Impeller shaft diameter 1 9/16’’ 1 9/16" 2'' 2" 2" Balanced impeller Std Std Std Std Std Drum center height 15 ½’’ 17 ¾'' 17 ¾’’' 19 ½'' 22" Cylinder for chute (deflector) 2’’ x 6’’ 2 ½" X 8" 2 ½" X 8" 2 ½" X 8" 2 ½" X 8" Chute rotation by hydraulic motor (gear) with cushion valve Std Std Std Std Std
Manual deflector Opt. Opt. Opt. Opt. Opt. Hydraulic deflector Std Std Std Std Std Semi industrial chute (2 deflectors) Std Std Std Std Std Hydraulic telescopic chute - Opt. Opt. Opt. Opt. Hoses holder Std Std Std Std Std Main auger diameter 19 ½’’ 23" 23" 23" 23" Upper auger diameter - - - - 17" Balanced auger Std Std Std Std Std Revesible carbon steel blade Std Std Std Std Std Reversible Hardox 450 blade Opt. Opt. Opt. Opt. Opt. Reversible stainless steel blade Opt. Opt. Opt. Opt. Opt. Tivar blade Opt. Opt. Opt. Opt. Opt. Adjustable carbon steel skid shoes Std Std Std Std Std Adjustable Hardox 450 skid shoes Opt Opt. Opt. Opt. Opt. Adjustable stainless steel skid shoes Opt Opt. Opt. Opt. Opt.
Adjustable Tivar skid shoes Opt Opt. Opt. Opt. Opt. Storage foot Std Std Std Std Std Driving chain number 60 80 80 80 100 Number of safety bolts 2 2 3 3 3 Bearing ductile iron casing Std Std Std Std Std Shaft P.T.O. standard T60 T60 T80 T80 T80 1 000 @ 540 reducer box - Opt. Opt. Opt. Opt. Adjustable hitch Std Std Std Std Std Hitch category (QH = quick hitch) 1, 1QH, 2 2, QH 2, QH 2, QH 2, QH Approx weight (lbs) - 1 auger 1 148 1 847 2 090 2 343 2 338 / 2 508
The weight includes scrapper blade but does not include chute and accessories. Specifications are subject to change without notice
US$ 2018
Effective April 1st, 2018 US$ Price List 218-770-5473 TNA Sales and Distribution
36
Each kit includes: Snowblower – Industrial yellow standard color PTO shaft, Semi industrial chute, Hydraulic motor with cushion valve and support for chute rotation Hydraulic cylinder for chute deflector, Carbon steel cutting edge and reversible blade, Complete hoses holder, Hardox 450 reinforcement side and 3-points, H450 lateral blade, Two semi full flight auger
MODELS AND PRICE OF KITS
Snowblowers for sidewalks
50 @ 75 HP
N50-262H N60-262H
$9,715 $9,939
Accessories INCLUDED in the price of the kit PTO shaft 1 3/8 – 6 splines snowbower side 1 3/8 – 6 splines tractor side
PART #
PRICE
PTO T60 06-0015 Included
SEMI INDUSTRIAL CHUTE PART # PRICE Semi industrial chute with 1 flat deflector & 1 rounded deflector 29-3799 Included
CHUTE ROTATION PART # PRICE
Hydraulic motor with chromed shaft and cushion valve and support 29-4942 Included
CHUTE DEFLECTOR ACTION PART # PRICE
Hydraulic cylinder with flow reducer (2"x 6")* 2 500 psi 14-1016 Included
OPTIONS FOR SEMI INDUSTRIAL CHUTE PART # PRICE
Anti fog removable front panel 29-3799-60 $99
Hydraulic cylinder with flow reducer (2"x 6")* 3 000 psi S14-1016-HD $34 Telescopic gap rod (manual) IN REPLACEMENT OF HYDRAULIC CYLINDER 29-0850 0$
OPTIONAL accessories to add to the price of the kit NB : An «S» before the part number means that extra costs have to be added to the base price for the replacement of the original part.
US$ 2018
Effective April 1st, 2018 US$ Price List 218-770-5473 TNA Sales and Distribution
37
OPTIONAL accessories to add to the price of the kit NB : An «S» before the part number means that extra costs have to be added to the base price for the replacement of the original part.
PTO SHAFT 1 3/8 – 6 splines snowblower side 1 3/8 – 6 splines tractor side
PART #
PRICE
T80 assembly like a T60 (bigger) SPTO-T80/T60 $314
Hardox 450 TEETH ON AUGER PART # PRICE (extra)
hardox 450 teeth on auger (for 1 auger) SDH-50 $605
HOSES KIT WITH CONNECTORS – NOT INSTALLED PART # PRICE
For N50-262 & N60-262H with semi industrial chute 2 hydraulic functions 14-2100-03 $286
ASSEMBLY PART # NET PRICE
Assembly & greasing chute, 3-pts attachment, rotation and hoses if ordered For complete details, see page 2
AS-N240-260 $271
SPECIAL COLORS (ordered before fabrication) MODELS PRICE
Surfacer epoxy, urethane painting (black, blue, green, orange, red) N50-262H N60-262H $165
NB : No cancellation of special color will be accepted. For all models of boxes reducer or accelerator, specifications & prices, see pages 50 to 52.
Effective April 1st, 2018 US$ Price List 218-770-5473 TNA Sales and Distribution
38
US$ 2018
2 augers Snowblowers for sidewalks N50-262H N60-262H Recommended horsepower (HP PTO) 50 @ 75 50.@ 75 Cutting width 50’’ 60’’ Cutting height 37’’ 37’’ Impeller RPM 540 540 Impeller diameter 26’’ 26’’ Impeller depth 11’’ 11’’ Number of blades 4 4 Impeller shaft diameter 1 9/16’’ 1 9/16’’ Balanced impeller Std Std Drum center height 15’’ 15’’ Removable rotary drum - - Chute rotation by hydraulic motor Std Std Cylinder for chute (deflector) 2’’ x 4’’ 2’’ x 6’’ Manual deflector Opt. Opt. Hydraulic deflector Std Std Hoses holder Std Std Semi industrial chute (2 deflectors) Std Std Hydraulic telescopic chute - - Main auger diameter 19’’ 19’’ Upper auger diameter 13’’ 13’’ Balanced auger Std Std Revesible carbon steel blade Std Std Reversible Hardox 450 blade Opt. Opt. Reversible stainless steel blade Opt. Opt. Tivar blade Opt. Opt. Lateral blades Std Std Adjustable carbon steel skid shoes Std Std Adjustable Hardox 450 skid shoes Opt. Opt. Adjustable stainless steel skid shoes Opt. Opt. Adjustable Tivar skid shoes Opt. Opt. Storage foot Std Std Driving chain 80 80 Number of safety bolts 2 2 Bearing ductile iron casing Std Std Shaft P.T.O. standard T60 T60 Adjustable hitch Std Std Hitch category 2 2 Approx. weight (lb) - 1 auger 900 950
The weight does not include chute and accessories. Prices and specifications are subject to change without notice
Effective April 1st, 2018 US$ Price List 218-770-5473 TNA Sales and Distribution
39
US$ 2018
MODELS AND PRICE OF KITS HYBRID Snowblowers
25 @ 50 HP 40 @ 75 HP 60 @ 90 HP 85 @ 140 HP
N74-250HYB N82-260HYB N92-280HYB N100-310HYB
$9,280 $9,768 $11,760 $14 957
Each kit includes:
• PTO shaft, • Semi industrial chute, • Hydraulic motor with cushion valve and support for chute rotation, • Gear for the chute, • Hydraulic cylinder for chute deflector, • Reversible carbon steel blade, • Hose holder kit, • Mobile lateral rubber skid shoes, • Hardox 450 components: Structure, triple bottom, sides and reinforcements of sides, 3-points, fan, blades of the
auger and lining behind the blades of auger Accessories INCLUDED in the prices of the kit PTO SHAFT
1 3/8 – 6 splines snowblower side / 1 3/8 – 6 splines tractor side PART # PRICE
PTO T40 for N74-250HYB 06-0010 Included
PTO T60 for N82-260HYB, N92-280HYB 06-0015 Included PTO SHAFT 1 ¾ - 20 splines snowblower side / 1 3/8 – 6 splines tractor side PART # PRICE
PTO T80 for N100-310HYB 06-0001 Included
SEMI INDUSTRIAL CHUTE PART # PRICE N74-250HYB Semi-industrial with one flat deflector and 1 rounded deflector 29-5789 Included
N82-260HYB Semi-industrial with one flat deflector and 1 rounded deflector 29-5799 Included
N92-280HYB Semi-industrial with one flat deflector and 1 rounded deflector 29-0798 Included
N100-310HYB Semi-industrial with one flat deflector and 1 rounded deflector 29-1792 Included
CHUTE ROTATION PART # PRICE For chute 29-5789 and 29-5799 Hydraulic motor with chromed shaft and cushion valve and support 29-4942 Included
For chute 29-0798 Hydraulic motor with chromed shaft and cushion valve and support
Gear for the chute
29-1923
29-0908-10
Included
Pour chute 29-1792 Hydraulic motor with chromed shaft and cushion valve and support
Gear for the chute
29-1923
29-1908-10
Included
CHUTE DEFLECTOR ACTION PART # PRICE N74-250HYB Hydraulic cylinder (2'' x 4'') including flow reducer 2 500 psi 14-1013 Included N82-260HYB Hydraulic cylinder (2’’ X 6’’) including flow reducer 2 500 psi 14-1016 Included N92-280HYB & N100-310HYB Hydraulic cylinder (2 ½'' x 8'') 2 500 psi 14-1011 Included
Effective April 1st, 2018 US$ Price List 218-770-5473 TNA Sales and Distribution
40
US$ 2018
OPTIONAL accessories to add to the price of the kit NB : An «S» before the part number means that extra costs have to be added to the base price for the replacement of the original part.
OPTIONS FOR SEMI INDUSTRIAL CHUTE PART # PRICE
For chute 29-5789 Anti fog removable front panel 29-3789-60 $93
For chute 29-5799 Anti fog removable front panel 29-3799-60 $93
For chute 29-0798 Anti fog removable front panel 29-0798-60 $93
For chute 29-1792 Anti fog removable front panel 29-1792-60 $93
N74-250HYB Hydraulic cylinder (2'' x 4'') including flow reducer 3 000 psi S14-1013-10 $28
N82-260HYB Hydraulic cylinder (2’’ X 6’’) including flow reducer 3 000 psi S14-1016-HD $33
N92-280HYB & N100-310HYB Hydraulic cylinder (2 ½'' x 8'') 3 000 psi S14-1011-30 $42
Telescopic gap rod (manual) IN REPLACEMENT OF HYDRAULIC CYLINDER 29-0850 $0
OPTIONS FOR BLADES
Hardness level of material 1 being the hardest & 3 the softness PART # PRICE Carbon steel (2) All blades installed on all snowblowers
are made with carbon steel
-
Included
Stainless steel (2)
N74-250HYB SCI74-250HYB $320
N82-260HYB SCI82-260HYB $342
N92-280HYB SCI92-280HYB $453
N100-310HYB SCI100-310HYB $478 Hardox 450
(1)
N74-250HYB SCH74-250HYB $161
N82-260HYB SCH82-260HYB $161
N92-280HYB SCH92-280HYB $165
N100-310HYB SCH100-310HYB $165 Tivar 88
(3)
N74-250HYB SCT74-250HYB $606
N82-260HYB SCT82-260HYB $597
N92-280HYB SCT92-280HYB $559
N100-310HYB SCT100-310HYB $625
Blades & skid shoes wear not covered by the warranty
Effective April 1st, 2018 US$ Price List 218-770-5473 TNA Sales and Distribution
41
US$ 2018
OPTIONAL accessories to add to the price of the kit NB : An «S» before the part number means that extra costs have to be added to the base price for the replacement of the original part.
HOSES KIT WITH CONNECTORS – NOT INSTALLED PART # PRICE
For N74-250HYB, N82-260HYB, 2 hydraulic functions 14-2100-03 $286
For N92-280HYB, N100-310HYB, 2 hydraulic functions 14-2100-01 $301
ASSEMBLAGE PART # NET PRICE Assemby N74-250HYB and N82-260HYB (Chute, 3-pts, rotation, cylinder and hoses , if ordered) For complete details see page 2
AS-N240-260
$271
Assembly N92-280HYB (Gear for chute, chute, 3-pts, rotation, cylinder and hoses if ordered) For complete details see page 2
AS-N280
$281
Assembly N100-310HYB (Gear for chute, chute, 3-pts, rotation, cylinder and hoses if ordered) For complete details see page 2
AS-N310-342
$315
SPECIAL COLORS (ordered before fabrication)
MODELS
PRICES
Surfacer epoxy, urethane painting (black, blue, green, orange, yellow ind.)
N74-250HYB & N82-260HYB $165
N92-280HYB & N100-310HYB $188
NB : No cancellation of special color will be accepted.
Effective April 1st, 2018 US$ Price List 218-770-5473 TNA Sales and Distribution
42
US$ 2018
10HYB
The weight does’nt include chute and accessories. Prices and specifications are subject to change without notice.
HYBRID SERIES
1 auger only
N74-250HYB N82-260 HYB N92-280HYB N100-3 Recommended horsepower
(HP PTO) 25 @ 50 40 @ 75 60 @ 90 85 @ 140
Cutting width 74" 82" 92" 10 0’’
Cutting height 27 ½’’ 28 ½’ ’ 30 ¼’’ 33’’
Impeller RPM 540 540 540 540
Impeller diameter 25" 26" 28 ½" 31
Impeller depth 9 " 11" 12" 14 ¼’’
Number of blades 4 4 4 5
Impeller shaft diameter 1 9/ 16" 1 9/16" 1 9/16" 2 ''
Balanced impeller Std Std Std Std
Drum center height 21 ½" 22 ½" 24 ¼" 26 ½’’
Cylinder for chute 2" X 4" 2" X 6 " 2 ½’’ X 8" 2 ½’’ X 8" Chute rotation by hydraulic motor with valve
(gear) Std Std Std Std
Manual deflector Opt. Opt. Opt. Opt.
Hydraulic deflector St d. Std. Std Std Semi Industrial chute (2 deflectors) Std Std
Std Std
Main auger diameter 15" 16" 17" 18’’
Hoses holder Std Std Std Std
Balanced auger Std Std Std Std
Reversible carbon steel blade Std Std Std Std
Reversible Hardox 450 blade Opt. Opt. Opt. Opt.
Reversible stainless steel blade Opt. Opt. Opt. Opt.
Tivar blade Opt. Opt. Opt. Opt.
Mobile lateral rubber skid shoes Std Std Std Std
Storage foot Std Std Std Std
Driving chain number 6 0 80 80 100
Number of safety bolts 2 2 3 3
Bearing ductile iron casing Std Std Std Std
PTO shaft standard T40 T60 T60 T80 Hitch category (QH = Quick Hitch) 1, 1 QH 1 & 2 QH 2 QH 2 QH
Approx weight (lbs) - 1 auger 898 1 040 1 395 1 9 50
Effective April 1st, 2018 US$ Price List 218-770-5473 TNA Sales and Distribution
43
US$ 2018
MODELS AND PRICE OF KITS
Pull Type snowblowers 25 @ 45 HP 40 @ 65 HP 60 @ 85 HP 85 @ 140 HP
N74-250HINV Skid shoes included
N82-260HINV Skid shoes included
N92-280HINV Skid shoes included
N102-310HINV Skid shoes included
$8,571 $9,051 $11,009 $14,734
Each kit includes: • PTO shaft • Semi industrial chute, • Hydraulic motor with cushion valve and support for chute rotation • Hydraulic cylinder for chute deflector • Carbon steel skid shoes and cutting edge • Complete hoses holder • Standard with Hardox 450 Reinforcement sides & 3-pts
Accessories INCLUDED in the price of the kit PTO shaft
1 3/8 – 6 splines snowblower side 1 3/8 – 6 splines tractor side
PART #
PRICE
PTO T40 Long For N74-250HINV 06-0020 Included
PTO T60 Long For N82-260HINV, N92-280HINV 06-0037 Included PTO shaft 1 ¾ - 20 splines snowblower side 1 3/8 – splines tractor side
PART #
PRICE
PTO T80 Long For N102-310HINV 06-0047 Included
SEMI INDUSTRIAL CHUTE PART # PRICE N74-250HINV Semi Industrial chute with 1 flat deflector & 1 rounded deflector 29-3784 Included
N82-260HINV Semi Industrial chute with 1 flat deflector & 1 rounded deflector 29-3783 Included
N92-280HINV Semi Industrial chute with 1 flat deflector & 1 rounded deflector 29-0798 Included
N102-310HINV Semi Industrial chute with 1 flat deflector & 1 rounded deflector 29-1792 Included
CHUTE ROTATION PART # PRICE N74-250HINV & N82-260HINV Hydraulic motor with chromed shaft and cushion valve and support 29-4942 Included
N92-280HINV Hydraulic motor with chromed shaft and cushion valve and support Gear for the chute
29-1923 29-0908
Included Included
N102-310HINV Hydraulic motor with chromed shaft and cushion valve and support Gear for the chute
29-1923 29-1908
Included Included
CHUTE DEFLECTOR ACTION PART # PRICE N74-250HINV Hydraulic cylinder (2'' x 4'') with flow reducer 2 500 psi 14-1013 Included N82-260HINV Hydraulic cylinder (2’’ X 6’’) with flow reducer 2 500 psi 14-1016 Included N92-280HINV & N102-310HINV Hydraulic cylinder (2 ½'' x 8'') 2 500 psi 14-1011 Included
Effective April 1st, 2018 US$ Price List 218-770-5473 TNA Sales and Distribution
44
US$ 2018
OPTIONAL accessories to add to the price of the kit
NB : An «S» before the part number means that extra costs have to be added to the base price for the replacement of the original part.
OPTION FOR PTO SHAFT PART # PRICE
N74-250HINV Protective screen EN-DEFL05 $131
N82-260HINV Protective screen EN-DEFL03 $136
N92-280HINV Protective screen EN-DEFL01 $141
N102-310HINV Protective screen EN-DEFL04 $153
OPTIONS FOR SEMI INDUSTRIAL CHUTE PART # PRICE
For chute 29-3784 Anti fog removable front panel 29-3789-60 $99
For chute 29-3783 Anti fog removable front panel 29-3799-60 $99
For chute 29-0798 Anti fog removable front panel 29-0798-60 $99
For chute 29-1792 Anti fog removable front panel 29-1792-60 $99
N74-250HINV Hydraulic cylinder (2'' x 4'') with flow reducer 3 000 psi S14-1013-10 $29
N82-260HINV Hydraulic cylinder (2’’ X 6’’) with flow reducer 3 000 psi S14-1016-HD $34
N92-280HINV & N102-310HINV Hydraulic cylinder (2 ½'' x 8'') 3 000 psi S14-1011-30 $43
Telescopic gap rod (manual) IN REPLACEMENT OF HYDRAULIC CYLINDER 29-0850 $0
SKID SHOES & BLADES KITS
Hardness level of material 1 being the hardest & 3 the softness PART # PRICE (extra)
Carbon steel (2)
All blades & skid shoes installed on all snowblowers are made with carbon steel
-
Included
Stainless (2)
N74-250HINV SCPI74H $399
N82-260HINV SCPI82H $422
N92-280HINV SCPI92-280HINV $590
N102-310HINV SCPI102-310HINV $635
Hardox 450
(1)
N74-250HINV SCPH74H $208
N82-260HINV SCPH82H $197
N92-280HINV SCPH92-280HINV $224
N102-310HINV SCPH102-310HINV $224
Tivar 88
(3)
N74-250HINV SCPT74H $771
N82-260HINV SCPT82H $760
N92-280HINV SCPT92-280HINV $714
N102-310HINV SCPT102-310HINV $768
Blades & skid shoes wear not covered by the warranty
Effective April 1st, 2018 US$ Price List 218-770-5473 TNA Sales and Distribution
45
US$ 2018
OPTIONAL accessories to add to the price of the kit (suite)
NB : An «S» before the part number means that extra costs have to be added to the base price for the replacement of the original part.
FRME OF REAR BLADE WITH HARDOX 450 PIVOT ARMS (without blade, without cylinder, without chains) PART # PRICE
For N74-250HINV Frame of rear blade 29-5824 $831 For N82-260HINV Frame of rear blade 29-5825 $898 For N92-280HINV Frame of rear blade 29-5826 $964 For N102-310HINV Frame of rear blade 29-5823 $993
** The rear blade is not installed on delivery of the snowblower unless the complete assembly has been chosen (EXTRA FEES)
TYPES OF BLADES* PART # PRICE
Steel
N74-250HINV 29-5815-22 $133 N82-260HINV 29-5818-13 $139 N92-280HINV 29-5805-20 $150 N102-310HINV 29-5810-15 $177
Tivar 88
N74-250HINV 29-5815-16 $309 N82-260HINV 29-5818-05 $325 N92-280HINV 29-5805 $348 N102-310HINV 29-5810-11 $443
Rubber
N74-250HINV 29-5815-21 $349 N82-260HINV 29-5819-02 $368 N92-280HINV 29-5809-02 $386 N102-310HINV 29-5811-02 $508
CYLINDERS OR CHAINS FOR REAR BLADES *▪ PART # PRICE Hydraulic cylinder 2 x 6 (2 500 lbs) - 2 units / rear blade 14-1016 $132 Hydraulic cylinder 2 x 6 HD (3 000 lbs) - 2 units / rear blade 14-1016HD $158 Complete kit of chains 03-5215 $122 * These components are required for the warranty of the rear blade ▪ These components are required for the mounting & installation of the blade at our plant
HOSES KIT WITH CONNECTORS – NOT INSTALLED PART # PRICE For pull type snowblower, 2 hydraulic functions 14-2100-12 $323 For rear blade with cylinder on pull type snowblower 14-2100-13 $259
ASSEMBLY PART # PRICE NET Assembly Pull type (gear for chute, chute, 3-pts pins, rotation, rear blade and hoses if ordered For complete details, see page 2
AS-NINV
$218
SPECIAL COLORS (ordered before fabrication)
MODELS
PRICE
Surfacer epoxy, urethane painting (black , blue, green, orange, yellow ind.)
N74-250HINV & N82-260HINV $165
N92-280HINV & N102-310HINV $188 NB : No cancellation of special color will be accept
2018
1 auger only
PULL TYPE SNOWBLOWERS N74-250HINV N82-260HINV N92-280HINV N102-310HINV Recommended horsepower (HP PTO) 25 @ 45 40 @ 65 60 @ 85 85 @ 140 Cutting width 74" 82" 92" 102 Cutting height 28" 28 ½’’ 31 5/8" 37’’ Impeller RPM 540 540 540 540 Impeller diameter 25" 26" 28 ½" 31 Impeller depth 9" 11" 12" 14 ¼’’ Number of blades 4 4 4 5 Impeller shaft diameter 1 9/16" 1 9/16" 1 9/16" 2'' Balanced impeller Std Std Std Std Drum center height 14 ½" 14 ½" 16 ¼" 18 ½’’ Removable rotary drum - - - - Cylinder for chute deflector 2" X 4" 2" X 6" 2 ½’’ X 8" 2 ½’’ X 8" Chute rotation by hydraulic motor Std. Std. Std Std Manual deflector Opt. Opt. Opt. Opt. Hydraulic deflector Std Std Std Std Semi industrial chute (2 deflectors) Std Std Std Std Hydraulic telescopic chute - - - - Main auger diameter 17" 17" 18" 22’’ Hoses holder Std Std Std Std Balanced auger Std Std Std Std Adjustable carbon steel skid shoes Std Std Std Std Adjustable Hardox 450 skid shoes Opt. Opt. Opt. Opt. Adjustable stainless steel skid shoes Opt. Opt. Opt. Opt. Tivar blade Opt. Opt. Opt. Opt. Adjustable carbon steel skid shoes Std Std Std Std Adjustable Hardox 450 skid shoes Opt. Opt. Opt. Opt. Adjustable stainless steel skid shoes Opt. Opt. Opt. Opt. Adjustable Tivar skid shoes Opt. Opt. Opt. Opt. Storage foot Std Std Std Std Driving chain 60 60 80 80 Number of safety bolts 2 2 2 3 Bearing ductile iron casing Std Std Std Std Shaft P.T.O. standard T40 long T60 long T60 long T80 long Hitch category (QH = Quick hitch) 1, 1 QH 1 & 2 2 2 Approx. weight (lb) - 1 auger 740 900 1 325 1 850
The weight does not include chute and accessories. Prices and specifications are subject to change without notice
46
Effective April 1st, 2018 TNA Sales and Distribution 218-770-5473
US$ 2018
Effective April 1st, 2018 US$ Price List 218-770-5473 TNA Sales and Distribution
47
*Reducer box SBR-200 included for models
N102-342HTRI to N120-342HTRI
The HP PTO ranges mentionned are the minimum & the maximum required for effective and durable usage On all industrial models, the chute is on the left side of the snowblower (tractor view).
REQUIRED ACCESSORIES TO ADD TO THE BASE PRICES CHUTE SELECTION for model N99-342HTRSI PART # PRICE Semi industrial with 1 flat deflector & 1 rounded deflector, hydraulic cylinder (2 ½’’ x 8’’) 3 000 psi for deflector, front removable anti fog panel and hoses (14-2100-02)
EN-CHU-I08
$2 330
Hydraulic telescopic including mounted cylinder, hydraulic cylinder (2 ½’’ x 8’’) 3 000 psi for deflector, 2 front removable anti fog panels and hoses (14-2100-32)
EN-CHU-I09
$5 725
CHUTE SELECTION for models N102-342HTRI & N120-342HTRI PART # PRICE Semi industrial with 1 flat deflector & 1 rounded deflector, hydraulic cylinder (2 ½’’ x 8’’) 3 000 psi for deflector, front removable anti fog panel and hoses (14-2100-15)
EN-CHU-110
$1 525
Hydraulic telescopic including mounted cylinder, hydraulic cylinder (2 ½’’ x 8’’) 3 000 psi for deflector, 2 front removable anti fog panels and hoses (14-2100-16)
EN-CHU-I11
$4 181
Hydraulic telescopic including mounted cylinder, hydraulic cylinder (2 ½’’ x 8’’) 3 000 psi for deflector, 2 front removable anti fog panels and hoses (14-2100-19)
EN-CHU-I12
$5 773
ACCESSORIES INCLUDED IN THE BASE PRICES
Two semi full flight augers on N99-342HTRSI; One ribbon type auger and one semi full flight auger on N102-342HTRI to N120-342HTRI; Two full flight augers on N100-362TRI to N120-402TRI; All augers with Hardox 450 teeth; Sidewalk chain diverter (Hardox 450) on N102-342HTRI to N120-342HTRI; Truck / Guardrail diverter (Tivar); Wheels and cutting edge in Hardox 450 on N102-342HTRI to N120-342HTRI; Reducer box SBR-200 included for models N102-342HTRI to N120-342HTRI; Hardox 450 fixed lateral blades; Skid shoes and cutting edge in Hardox 450 on N100-362TRI to N120-402TRI; Hydraulic motor with chromed shaft and valve for rotary drum; Hydraulic motor with chromed shaft and valve for chute rotation; Assembly – except telescopic chute; Clutch on driving shaft (except N99-342HTRSI);
• Hoses are included (14-2100-14 / 14-2100-20)
CHUTE & PTO SHAFT NOT INCLUDED
MODELS AND PRICES INDUSTRIAL SNOWBLOWERS
100 @ 200 HP 125 @ 225 HP 140 @ 350 HP 250 @ 350 HP N99-342HTRSI
$21,015 N102-342HTRI*
$34 087 N100-362TRI
$36,158 N102-402TRI
$42,296 N110-342HTRI*
$36 437 N110-362TRI
$38,948 N110-402TRI
$45,086 N120-342HTRI*
$36 907 N120-362TRI
$39,506 N120-402TRI
$45,644
US$ 2018
Effective April 1st, 2018 US$ Price List 218-770-5473 TNA Sales and Distribution
48
CHUTE SELECTION for models N100-362TRI & N120-402TRI PART # PRICE Semi industrial with 1 flat deflector & 1 rounded deflector, hydraulic cylinder (2 ½’’ x 8’’) 3 000 psi for deflector, front removable anti fog panel and hoses (14-2100-15)
EN-CHU-113
$1 525
Hydraulic telescopic including mounted cylinder, hydraulic cylinder (2 ½’’ x 8’’) 3 000 psi for deflector, 2 front removable anti fog panels and hoses (14-2100-16)
EN-CHU-I14
$4 181
Hydraulic telescopic including mounted cylinder, hydraulic cylinder (2 ½’’ x 8’’) 3 000 psi for deflector, 2 front removable anti fog panels and hoses (14-2100-19)
EN-CHU-I15
$5 773
REQUIRED ACCESSORIES TO ADD TO THE BASE PRICES PTO SHAFT PTO SHAFT 1 ¾ - 20 splines snowblower side 1 3/8 – 21 splines tractor side
PART #
PRICE
V80. multilobes 06-0022 $990
V90. bigger and multilobes 06-0028 $1 377 PTO SHAFT 1 ¾ - 20 splines snowblower side 1 ¾ - 20 splines tractor side
PART #
PRICE
V80. multilobes 06-0018 $990
V90. bigger and multilobes 06-0019 $1 377
W2600 / with clutch 06-0023 $2 379 For N102-342HTRI @ N120-402TRI Clutch in replacement of shear plates and safety bolt on driving shaft for the auger SEMB-001 included
REDUCER BOX PART # PRICE For N99-342HTRSI Box reducer with 3 gears (175HP) 1000@540RPM & reducer/reverser (225HP) 1 ¾ - 20 splines, including mounting kit
SBR-200
$3 000
For N102-342HTRI to N120-342HTRI Box reducer with 3 gears (175HP) 1000@540RPM & reducer/reverser (225HP) 1 ¾ - 20 splines, including mounting kit
SBR-200
Included
Pour N100-362TRI 300HP & N102-402TRI Box reducer with 2 gears (350 HP) 1000@540RPM
SBRI-300
$3 720
Pour N100-362TRI 300HP & N102-402TRI Box reducer with 3 gears (350 HP) 1000@540RPM (Exclusive box for Normand Co. Ltd)
SBR-300
$4 692
For all models of boxes reducer or accelerator, specifications & prices, see pages ….
SPECIAL ACCESSORIES TO ADD TO THE BASE PRICES LUBRIFICATION SYSTEM INCLUDING PUMP AND TANK * PART # PRICE
For N100-362TRI Lubrification system SBRI-300 14-8014 $1 609 For N100-362TRI Lubrification system SBR-300 14-8016 $1 609 For N102-402TRI Lubrification system SBRI-300 14-8013 $1 609 For N102-402TRI Lubrification system SBR-300 14-8015 $1 609
* Recommended on tractor more than 250 HP
US$ 2018
Effective April 1st, 2018 US$ Price List 218-770-5473 TNA Sales and Distribution
49
SPECIAL ACCESSORIES TO ADD TO THE BASE PRICES LATERAL BLADES IN HARDOX 450 PART # PRICE For N102-342HTRI Hyd. lateral blade + Hydraulic cylinder (84'' x10'') in Hardox 450 and hoses (14-2100-17) 50-1818 $3 433
For N110-342HTRI Hyd. lateral blade + hydraulic cylinder (84'' x10'') in Hardox 450 and hoses (14-2100-17) 50-1819 $3 462
For N120-342HTRI Hyd. lateral blade + hydraulic cylinder (84'' x10'') in Hardox 450 and hoses (14-2100-17) 50-1820 $3 490
For N100-362TRI Hyd. lateral blade + hydraulic cylinder (84'' x 10'') in Hardox 450 and hoses (14-2100-17) 50-3800 $3 433
For N110-362TRI Hyd. lateral blade + hydraulic cylinder (84'' x10'') in Hardox 450 and hoses (14-2100-17) 50-3808 $3 499
For N120-362TRI Hyd. lateral blade + hydraulic cylinder (84'' x10'') in Hardox 450 and hoses (14-2100-17) 50-3809 $3 532
For N102-402TRI Hyd. lateral blade + hydraulic cylinder (96'' x 16'') in Hardox 450 and hoses (14-2100-17) 50-2810 $4 269
For N110-402TRI Hyd. lateral blade + hydraulic cylinder (96'' x 16'') in Hardox 450 and hoses (14-2100-17) 50-8216 $4 295
For N120-402TRI Hyd. lateral blade + hydraulic cylinder (96'' x 16'') in Hardox 450 and hoses (14-2100-17) 50-2815 $4 319
RUBBER KIT PART # PRICE For N100-362TRI Front rubber lining kit 50-3180 $488 For N110-362TRI Front rubber lining kit 50-3181 $497 For N120-362TRI Front rubber lining kit 50-3182 $524 For N102-402TRI Front rubber lining kit 50-2180 $521 For N110-402TRI Front rubber lining kit 70-0031 $539 For N120-402TRI Front rubber lining kit 50-2181 $556
NB : An «S» before the part number means that extra costs have to be added to the base price for the replacement of the original part.
ADJUSTABLE WHEELS KIT IN HARDOX 450 (in replacement of skid shoes) PART # PRICE (extra)
For N102-342HTRI & N120-342HTRI Extra charge for 2 wheels 70-0500 Inclus
For N100-362TRI & N120-362TRI Extra charge for 2 wheels S50-3355 $605
For N102-402TRI ton N120-402TRI Extra charge for 2 wheels S50-0355 $605
HARDOX 450 IMPELLER PART # PRICE (extra) For N99-342HTRSI to N120-342HTRI - Included IMPELLER WITH REPLACEABLE HARDOX 450 BLADES PART # PRICE (extra) For N100-362TRI, N110-362TRI, N120-362TRI Impeller S50-3250 Included For N102-402TRI, N110-402TRI, N120-402TRI Impeller S50-2251 Included
SET OF TIVAR SIDE PROTECTORS PART # PRICE (extra) For N100-362TRI to N120-362TRI Truck / Guardrail diverter EN-PROTIV362 $447
US$ 2018
Effective April 1st, 2018 US$ Price List 218-770-5473 TNA Sales and Distribution
50
SPECIAL ACCESSORIES TO ADD TO THE BASE PRICES SET OF QUICK ATTACHMENT #3 CATEGORY PART # PRICE For N100-362TRI Set of quick attachment # 3 category EN-QH01 $1 326 For N102-402TRI Set of quick attachment # 3 category EN-QH02 $1 326
HOLDERS AND LIGHTS PART # PRICE For N102-342HTRI & N100-362TRI Right side on base of the chute 50-1850-25 $375 For N102-342HTRI & N100-362TRI Left side on base of the chute 50-1851-25 $375 For N102-402TRI Right side on base of the chute 50-0850 $375 For N102-402TRI Left side on base of the chute 50-0851 $375 For telescopic chute EN-CHU-I03 & EN-CHU-I05 Left side light (with support, wire not include) 29-1697-87 $290
For telescopic chute EN-CHU-I03 & EN-CHU-I05 Right side light (with support, wire not include) 29-1697-88 $290
For telescopic chute with articulated deflector EN-CHU-I02 - Left side 50-0853 $423 For telescopic chute with articulated deflector EN-CHU-I02 - Right side 50-0852 $423
Because we want our industrial snowblowers to be both sturdy and lightweight, we use ultra high quality Hardox450 steel to manufacture the most heavy-duty components.
Compare to the standard steel, Hardox450 is about 4,5 times harder and more wear resistant while also being 3,5 times more rigid. For instance a ¼’’ thick Hardox450 plate is equivalent of a ¾’’ thick standard steel plate.
Components made with Hardox450 steel :
• Snowblower side (Except on N99-342HTRSI); • Reinforcement snowblower sides • Drum outline • Impeller with removable blades • Chute base (except N99-342HTRSI); • Gear for the chute (except N99-342HTRSI); • Articulated chute deflector • Full flight auger teeth • Adjustable wheels and skid shoes • Removable lateral skid shoes • Reversible blades • Lateral blades (except N99-342HTRSI) • Double bottom (except N99-342HTRSI) • Oil bath • 3-pts plates • Bottom plate (N102-342HTRI to N120-3423HTRI) • Auger structure (N102-342HTRI to N120-342HTRI)
US$ 2018
INDUSTRIAL SNOWBLOWERS N99-342HTRSI N102-342HTRI N100-362TRI N102-402TRI Recommended horsepower (HP PTO) 100 @ 200 125 @ 225 140 @ 350 250 @ 350 Cutting width 99’’ 100’’ 100’’ 102’’ Cutting height 48’’ 53’’ 52’’ 61’’ Impeller RPM 540 540 540 540 Snowremovale capacity ton/hour (up to) 1500 1700 1800 3000 Impeller shaft diameter 2’’ 2 ‘’ 2 1/2’’ 2 1/2’’ Drum contour in Hardox 450 Std Std Std Std Impeller diameter 34’’ 34’’ 36’’ 39 ¾’’ Impeller depth 14 ¼’’ 16’’ 13 ½’’ 15’’ Number of blade 5 5 5 5 Main auger diameter (full) 23’’ 30’’ 21’’ 23’’ Upper auger diameter (full) 17’’ 16’’ 21’’ 23’’ Driving chain 100 Renold 100 HV Renold 100 HV Renold 100 HV Number of safety boltd 2 1 + clutch 1 + clutch 1 + clutch
Bearing Ductile iron casing Std Std Std Std Cylinder– chute deflector 2 ½’’ x 8’’ 2 ½’’ x 8’’ 2 ½’’ x 8’’ 2 ½’’ x 8’’ Drum center height 21’’ 22’’ 23’’ 25 3/4’’ Balanced auger Std Std Std Std Hardox 450 impeller Std Std - - Impeller with Hardox 450 repleaceable blades - - Std Std Balanced auger Std Std Std Std Hardox 450 teeth on auger (main – upper) Std Std Std Std Removable rotary drum by hydraulic motor Std Std Std Std Hardox 450 reversible blade Std Std Std Std Hydraulic lateral blade - Opt Opt Opt Hardox 450 removable lateral skid shoes - Std Std Std Hardox 450 adjustable skid shoes Std Opt Std Std Adjustable wheels - Std Opt Opt Sidewalk chain diverter (Hardox 450) - Std Opt Opt Truck / Guardrail diverter (Tivar) - Std Opt Opt Hydraulic chute rotation by hydraulic motor Std Std Std Std Standard PTO shaft V80 or V90 V80 or V90 V90 V90 Box reducer 1 000 / 540 RPM Opt (recommanded) Opt (recommanded) Opt (recommanded) Opt (recommanded) Hitch category (QH = quick hitch) 2 QH 2 QH 2 3 Light holder on snowblower Opt Opt Opt Opt Light holder on chute Opt Opt Opt Opt Approx. weight (lbs) 2 575 lbs 3 380 lbs 3 720 lbs 5 580 lbs
The weight does not include chute and accessories. Prices and specifications are subject to change without notice.
51
Effective April 1st, 2018 US$ Price List TNA Sales and Distribution 218-770-5473
US$ 2018
Effective April 1st, 2018 US$ Price List 218-770-5473 TNA Sales and Distribution
52
PART #
DESCRIPTION
PICTURE
REVERSES DIRECTION
OF ROTATION
RATIO
RPM CAPACITY
AT 1000 RPM
CENTER TO
CENTER SHAFT
INPUT SHAFT
OUTPUT SHAFT
PRICES
06-2154 Box 2 gears
YES
1,8:1 1 000 to
555
75 HP
4,85" 1 3/8"-6
male 1 3/8" - 6 female
$1 777
06-2158 Box
2 gears
1,8:1 1000 to
555
85 HP
4,85" 1 ¾"-20
male 1 ¾"-20 female
$1 785
06-2147
Box 2 gears
YES
1,86:1
1 000 à
538
350 HP
6,75"
1 ¾"-20
male
1 ¾"-20 female
$3 443
SBRI-300 Box 06-2147 including mounting kit (brackets and hardware) / For N100-362TRI & N102-402TRI $3 720
For N86-280H @ N112-342HTR / For N99-342TRSI @ N100-362TRI
06-2164
Box 3 gears
YES
1,86:1 1 000 to
540
225 HP
6,75"
1 ¾" - 20 male
1 ¾"- 20 female
$2 938
NO
1,86:1 1 000 to 540
175 HP
8"
SBR-200-280 Box 06-2164 including mouniting kit (brackets and hardware) / For N86-280H @ N92-280H, N98-280H $3 175
SBR-200
Box 06-2164 including mouniting kit (brackets and hardware) / For N92-280HD @ N112-342HTR, N99-342HTRSI & N100-342TRI
$3 000
For N100-362TRI & N102-402TRI
06-2155
Box 3 gears
NO
1,88:1
1 000 to
531
350 HP
9"
1 ¾" - 20
male
1 ¾ " -20 female
$4 488
SBR-300 Box 06-2155 including mouniting kit (brackets and hardware) / For N100-362TRI & N102-402TRI $4 692
RISING AND REDUCER BOXES
The type of oil to be used in rising & reducer
boxes of this page :
Synthetic oil 75W140
US$ 2018
Effective April 1st, 2018 US$ Price List 218-770-5473 TNA Sales and Distribution
53
RISING BOX FOR NORMAND SNOWBLOWERS
PART #
DESCRIPTION
PICTURE
REVERSES DIRECTION
OF ROTATION
RATIO
RPM
CAPACITY AT
1000 RPM
CENTER
TO CENTER SHAFT
INPUT SHAFT
OUTPUT SHAFT
PRICES
06-2153
Box 2 gears
YES
1:1 540 to
540
75 HP
4,85" 1 3/8"-6
male 1 3/8"-6 female
$1 340
06-2157
Box 2 gears
YES
1:1 540 to
540
85 HP
4,85" 1 ¾’’ - 20 male
1 ¾’’ - 20 female
$1 688
06-2151
Box 2 gears
YES
1:1
540 to 540
150 HP
6,75"
1 ¾’’ - 20
male
1 ¾’’ - 20
female
$3 231
The prices above do not include installation & mounting kit
RISING & ACCELERATOR BOXES FOR ECONOR MODELS
PART #
DESCRIPTION
REVERSES DIRECTION
OF ROTATION
RATIO
RPM
CAPACITY
AT 1000 RPM
CENTER
TO CENTER SHAFT
INPUT SHAFT
OUTPUT SHAFT
PRICES
06-2300
Rising &
accelerator box E48-200 to
E72-240
NO
1:1.28
540 to 644
30 HP
4 3/8''
1 3/8"-6 male
1 3/8"-6 female
$607
06-2302
Rising & accelerator box
E78-240
NO
1:1.28
540 to 644
30 HP
6 ½"
1 3/8"-6 male
1 3/8"-6 female
$607
06-2303
Rising box E86-280 & E94-280
NO
1:1
540 to 540
60 HP
6 ½"
1 3/8"-6 male
1 3/8"-6 female
$1 072
The type of oil to be used in rising boxes (with gears) for Normand snowblowers :
Synthetic oil 75W140
The type of oil to be used in rising & accelerator boxes for ECONOR models :
Chain lubricant spray
US$ 2018
Effective April 1st, 2018 US$ Price List 218-770-5473 TNA Sales and Distribution
54
FOR 30 TO 70 HP TRACTORS (06-1952) AVAILABLE
RATIO RPM SHAFT CENTER TO
CENTER SHAFT PRICES IN OUT IN OUT
1:1 540 540 1 3/8"-6 male 1 3/8"-6 male 8" and more
$2 433 1:1,12 540 604 1 3/8"-6 female 1 3/8"-6 male 10 " and more
1:1,25 540 675 1 3/8"-6 female 1 3/8"-6 male 10 " and more
FOR 70 TO 150 HP TRACTORS (06-1950) AVAILABLE
RATIO RPM SHAFT CENTER TO
CENTER SHAFT
PRICES
IN OUT IN OUT
1 :1
540
540
1 ¾"-20 male
1 ¾"-20 male
10 " and more
$2 499
* Distance required between the two shafts (B) when you order
GEAR BOXES FOR FRONT MOUNTED SNOWBLOWERS
US$ 2018
55
SPREADERS
S3P Models
SCR Models
US$ 2018
218-770-5473 Effective April 1st 2018 US$ Price List TNA Sales and Distribution
56
SELF LOADING SAND AND SALT SPREADERS
SCR ECONOMIC Normand’s SCR spreader is perfect to spread sand, salt and other aggregate to control ice and snow on driveways, parking lots, sidewalks and other applications
SPREADING You can get the desired flow by adjusting the rotational speed of the feeding roller as well as the opening of the shutter.
Spreading pattern
FRONT MOUNTING Normand’s SCR spreader can be installed on the front
loader of most tractor. Adjustable plates are installed on the spreader to receive various quick attachments available on the market
QUICK LOADING - LABOR SAVING This heavy-duty spreader is easy to use. Use the hopper as a bucket in the lower position. Drive the tractor into the sand pile and then load. Put the spreader back in the upper position, start hydraulic control and spread the material. Can be operated by a single person.
REAR MOUNTING Normand’s SCR spreader can also be installed on a 3- points rear tractor hitch. (cat # 2). However, a hydraulic cylinder system is required (Optional)
INSTALLATION ON SKID STEER Normand’s SCR spreader can be
installed on the loader of a skid steer. An optional attachment must be fixed to the spreader to receive the skid steer’s quick attach.
US$ 2018
218-770-5473 Effective April 1st 2018 US$ Price List TNA Sales and Distribution
57
SELF LOADING SAND AND SALT SPREADERS SCR Capacity 0,55 yd Capacity 0,7 yd Capacity1,1 yd Capacity 1,2 yd Capacité 1,3 yd
SCR-54 $3,819
SCR-72 $3,979
SCR-86 $4,246
SCR-92 $4,440
SCR-98 $4,518
INCLUDED accessories in the price of the kit USE ON FRONT LOADER PART # PRICE For SCR-54 Attachment plates (2) to be bolt * EN-ATTSCR07 Included* For SCR-72 to SCR-98 Attachment plates (2) to be bolt * EN-ATTSCR04 Included*
*Must be used to install fasteners appropriate to the model of charger that will be used. The fasteners appropriate to the model of charger to be used are not supplied and not available at Normand Co. Ltd
Note : Some attachment must be welded according to a particular angle for complete unloading. * These plates are not supply if the customer chooses one of the two types of plates offered below
OPTIONAL accessories to add to the price of the kit
USE ON « SKID STEER » PART # PRICE For SCR-54 Quick attach to be bolt (65 lbs) EN-ATTSCR06 $378
For SCR-72 to SCR-98 Quick attach to be bolt (65 lbs) EN-ATTSCR03 $385
USE ON REAR 3-POINTS MECHANISM PART # PRICE For SCR-54 et SCR-72 Bolt-on mechanism – #1 category Including 2 hydraulic cylinder 2 ½’’ x 6’’ (without hoses) (130 lbs) EN-ATTSCR01 $1 158
For SCR-86 @ SCR-98 Bolt-on mechanism – #2 category Including 2 hydraulic cylinder 3’’ x 6’’ (wihtout hoses) (160 lbs) EN-ATTSCR02 $1 387
Installation fees not included
INCLUDED
EN-ATTSCR07 EN-ATTSCR04
SKID STEER
EN-ATTSCR06 EN-ATTSCR03
3-POINTS
EN-ATTSCR01 EN-ATTSCR02
MODELS SCR-54 SCR-72 SCR-86 SCR-92 SCR-98 CAPACITY The capacity in lb may vary depending on the type of material being used.
0,55 yd 1 340 lbs
0,7 yd 1 700 lbs
1,1 yd 2 670 lbs
1,2 yd 2 910 lbs
1,3 yd 3 160 lbs
Width 54‘‘ 72‘‘ 86‘‘ 92‘‘ 98‘‘ Depth 35‘‘ 35‘‘ 37‘‘ 37‘‘ 37’‘ Height 32‘‘ 32‘‘ 38‘‘ 38‘‘ 38‘‘ Spread width 48‘‘ 66‘‘ 80‘‘ 86‘‘ 92‘‘ Cushion Valve included included included included included Check Valve included included included included included Hydraulic motor included included included included included Weight 349 lbs 518 lbs 749 lbs 787 lbs 825 lbs Request : GPM (min. @ max.) PSI (minimum)
8 @ 16 GPM
1 300 PSI
8 @ 16 GPM
1 300 PSI
8 @ 16 GPM
1 300 PSI
8 @ 16 GPM
1 300 PSI
8 @ 16 GPM
1 300 PSI
*Hoses not included
218-770-5473 Effective April 1st 2018 US$ Price List TNA Sales and Distribution
58
US$ 2018
SPREADER ON 3-POINTS HITCH
S3P
*Hoses not included
ECONOMIC
S3P salt and sand spreader is perfect for controlling snow and ice on roads, driveways, sidewalks and others applications.
SPREAD
You can get the desired flow by adjusting the rotational speed of the hydraulically- powered feeding roller as well as the opening of the shutter.
The spreader is mounted on the 3-points rear tractor hitch. Category # 1
S3P spreader
MODELS S3P-46 S3P-56
PRICES $3,429 $3,532 Capacity The capacity in lb may vary depending on the type of material being used
0,41 yard
996 lb
0,5 yard 1 215 lb
Spread width 43'' 53'' Width 47'' 57'' Depth 33'' 33'' Height 34 ½'' 34 ½'' Hydraulic motor Included Included Cushion valve Included Included Check valve Included Included Top Screen Included Included Hitch category # 1 # 1 Weight 300 lb 335 lb Request GPM minimum @ maximum PSI (minimum)
11@16 GPM
1 300 PSI
11@16 GPM
1 300 PSI
US$ 2018
218-770-5473 Effective April 1st 2018 TNA Sales and Distribution
59
INFORMATIONS ON CHUTES
218-770-5473 Effective April 1st 2018 TNA Sales and Distribution
60
US$ 2018 TYPES OF CHUTES
MODELS Parts # / weight
Models Regular Semi industrial Telescopic Telescopic with
articulated deflectors
E48-200 Plus to E78-250 Plus 49-3515 42 lbs
49-3792 78 lbs - -
E86-280 Plus , E94-280 Plus 49-0515 74 lbs
49-0792 145 lbs - -
E100-310 Plus , E108-310 Plus 49-7515 89 lbs
49-7792 157 lbs - -
E68-220INV 49-5500 40 lbs - - -
N50-262H & N60-262H - 29-3799 102 lbs - -
N54-240H @ N74-250H - 29-3789 80 lbs - -
N74-260H @ N86-260HTR N78-260HE+ - 29-3799
102 lbs - -
N74-250HINV - 29-3784 80 lbs - -
N74-250HYB - 29-5789 81 lbs
N82-260HINV - 29-3783 108 lbs - -
N82-260HYB - 29-5799 102 lbs
N86-280H to N92-280HDTR N98-280H, N86-280HE+, N92-280HDE+
- 29-0798
140 lbs EN-CHU-I07
558 lbs
-
N92-280HINV N92-280HYB - 29-0798
140 lbs - -
N100-340HYB N102-310HINV - 29-1792
150 lbs - -
N92-310H to N112-342HTR, N92-310HE+, N98-342HE+ N99-342HTRSI
- 29-1792
150 lbs EN-CHU-I05
558 lbs
-
N102-342HTRI - 29-1789 150 lbs
EN-CHU-I11 530 lbs
EN-CHU-I12 770 lbs
N100-362TRI - 29-1789 150 lbs
EN-CHU-I03 558 lbs
EN-CHU-I02 890 lbs
N102-402TRI - 29-1789 150 lbs - EN-CHU-I01
956 lbs
218-770-5473 Effective April 1st 2018 TNA Sales and Distribution
61
US$ 2018 TYPES OF CHUTES
Semi industrial chutes
Snowblowers heights
Dimensions of semi industrial chutes
Models H* Chute # A* B* C* TOTAL H* + C*
N54-240H & N60-240H 29 9/16" 29-3789
31 3/8"
19 1/16"
40 13/16"
70 3/8’’
N68-250H & N74-250H 30 5/16" 71 1/8’’
N74-260H, N82-260H & N86-260H 32 5/8"
29-3799
37 5/16"
21 11/16"
48 15/16"
81 9/16’’
N82-260HTR & N86-260HTR 33 3/4" 82 11/16’’
N50-262H & N60-262H 32 3/8" 81 5/16’’
N86-280H to N98-280H N92-280HD, N86-280HE+ & N92-280HDE+
36"
29-0798
42 11/16"
27 1/8"
56 1/8"
92 1/8’’
N86-280HTR, N86-282HTR & N92-280HDTR 38 1/8" 94 ¼’’
N92-280HINV 34 5/8" 90 ¾’’ N92-310H to N98-312H & N92-310HE+ 41 1/4"
29-1792
46"
26 5/16"
60 3/8"
101 5/8’’
N92-310HTR to N98-312HTR 42 1/2" 102 7/8’’
N98-340H to N112-342H & N98-342HE+ 44 1/4" 104 5/8’’
N98-342HTR, N102-342HTR, N112-342HTR 46 1/2" 106 7/8’’
N102-310HINV 40 1/8" 100 ½’’
N99-342HTRSI 47 7/16" 107 13/16’’
N74-250HINV 30 5/16" 29-3784 31 1/8" 19 1/16" 40 13/16" 71 1/8’’
N82-260HINV 32 7/16" 29-3783 37 3/16" 21 11/16" 48 15/16" 81 3/8’’
N102-342HTRI 50 1/16’’ 29-1789
43 1/2"
23 15/16"
58 1/8"
108 3/16’’
N100-362TRI 53 9/16" 111 11/16’’
N102-402TRI 59 1/16" 50-0775 47 3/4" 27 1/2" 62 7/16" 121 ½ ‘’
* All dimensions are in inches
218-770-5473 Effective April 1st 2018 TNA Sales and Distribution
62
US$ 2018
TYPES OF CHUTES (suite)
Telescopic chutes Models Chute # E* F* G* H* I* J* N86-280H, N86-282H, N92-280H, N92-280HD, N98-280H
29-1697
139
120 ¼
142 1/16
99 5/16
93 ¼
115 1/16
N86-280HTR, N86-282HTR, N92-280HDTR 29-1697 141 ¼ 122 3/8 144 3/16 101 7/16 95 3/8 117 3/16
N92-310H, N92-312H, N98-310H, N98-312H 29-1697 144 ¼ 143 3/16 180 1/8 135 13/16 117 1/16 153 5/16
N92-312HTR, N98-310HTR, N98-312HTR 29-1697 162 5/8 143 7/8 180 13/16 136 ½ 117 ¾ 154
N98-342H, N102-340H, N102-342H, N112-342H 29-1697 156 5/16 137 9/16 174 ½ 130 3/16 111 7/16 147 11/16
N98-342HTR, N102-342HTR, N112-342HTR 29-1697 155 7/8 137 1/8 174 1/16 129 ¾ 111 147 ¼
N99-342HTRSI 29-1697 171 5/8 152 7/8 189 13/16 145 ½ 126 ¾ 163
N102-342HTRI 29-1697 153 ½’’ 134 5/8’’ 170 ¾’’ 126 3/8’’ 107 ½’’ 143 13/16’’
N100-362TRI 29-1697 156 137 1/4 174 3/16 129 7/8 111 1/8 147 3/8
Telescopic chutes with articulated deflectors Chute # K* L* M* N* O* P*
N102-342HTRI 50-1680 151 ½’’ 134’’ 149 ¼’’ 124 ½’’ 107’’ 122 ¼’’ N100-362TRI 50-1680 155 137 ½ 152 ¾ 128 110 ½ 125 ¾ N102-402TRI 50-1680 161 ½ 143 ¾ 159 134 ½ 116 ¾ 132
* All dimensions are in inches
Telescopic chutes
Telescopic chutes with articulated deflectors
warranty Every product manufactured by Normand Co. Ltd is guaranteed against manufacturing and raw material defects (excluding the P.T.O. shafts, gearboxes, engines, hydraulic motors, hydraulic cylinders, telescopic cylinders, tires, hubs and wheels, which are covered by the manufacturer warranty) for a full year from the date of purchase, provided that the product has not been modified or abused in any way. This warranty does not cover accidents or breaks caused by objects other than snow (metal bits, concrete, wood, asphalt, tires, etc.). Also blades, skid shoes, soles of skid shoes, driving chains and tires wear is not covered by the warranty. We will replace or repair any defective part at no cost if they are returned prepaid at our plant in Saint-Pascal (Kamouraska, Québec, Canada). Our obligations are limited to the replacement and/or repair of the defective part.
TNA Sales and Distribution 5524 53rd Ave S. #A, Fargo, ND 58104
218-770-5473 email : [email protected] website : www.TNAsales.com
www.facebook.com/TNAsalesanddistribution
NORMAND CO. LTD 340, rue Taché, St-Pascal (Qc) Canada G0L 3Y0
website : www.cienormand.com www.facebook.com/cienormand
©Normand Co Ltd 2018. All right reserved. Prices subject to change.
![TNA Montenegro [short]](https://img.pdfslide.us/doc/110x75/5529a7284a795990158b4856/tna-montenegro-short.jpg)
