Aesthetic & Medical

BRINGING you quality and affordable Aesthetic & Medical Lasers

ST@RLIGHT --Co2 Fractional Laser

Co2 Fractional Laser

· Acne scars

· Actenic keratoses

· Skin cut: for warts removal, naevus removal, acrochordon removal,

polypus removal

· Basal cell carcinoma

· Burn debridement

· Laser skin resurfacing

· Eliminate the scar: Traumatism, operation

· Improve texture tone and pore size

· Erase unwanted brown spots

· Smooth wrinkles around the eyes and mouth

· Rejuvenate your neck, chest and hands etc

·Skin Whitening & Tightening, wrinkle Removal

·Pore shrinking

·Striae Gravidarum Removal, Tone &Texture Improvement

·Syringoma and Steatoadenoma Removal

·Treatment of Actinic keratoses & Seborrheic keratosis

Machine "Hybrid" constructionAdvantages

• 1) Modular design, allows ease of servicing

• 2) Metal frame for durability & stability

• 3) Shielded power supply

• 4) Available in 30w / 60W Metal RF Tube laser

generator made in USA (Access laser Co.).

laser lifetime performs longer• 5) Higher accuracy & Stability per shot

Our "RF" tube eliminates the need for gas refill when exhausted, for ease of maintenance and service

• 6) Fast treatment: Super treatment area andhigh pulse energy can enable you to treat anentire face in as little as 10 minutes

• 7) Micro single DOT: Minimum 120 micronssmall spot size ensures deeper penetration

• 8) Customize treatment: Control the pattern,density and energy easily, offer the flexiblepossibilities of treatments

• 9) Cost -effective: 5 years warranty for RFexcited CO2 laser tube, no consumables,offers immediate return on your investment

• 10) Fractional scanner pattern size and shape

• 11) Ablative burn area for the treatment ofsmaller areas

Picture after Treatment

Articulating Arm & Heads

The articulating arm comes with 3 types and head sizes to fit your various applications and procedures

3 heads to choose from (included in your purchase)

Scanner : Diameter: 50.8mm, 63.5mm

Scanning size: Maximum 20*20mm

Cutting surgery head: 100mm Diameter

Technical specification

Laser

wavelength

10600nm Graphic area ≤ 20mm × 20mm

Wavelength of

the target

635 nm Mode of Spot single-mode

Power of Target

optical

≤ 5mw Operation Intermittent and

continuous work

Diameter of

Focal spot

0.25mm Scan mode switching: order,

disorder, parallel

Area of Focal

spot

0.05mm2 Refrigeration

system

Air-cooled

Output Power ≤30W

(≤60W for option )

Optical system 7 articulated arms

Operating

voltage

AC 220V, 110V ±10%, 50Hz

Output mode Super-pulse dot-

matrix

Net weight 50Kg/110 lbs. Gross weight 98kg/216.03 lbs.

Output graphic triangle / square / rectangle / circle/ Oval / hexagon / linear

(scalable)

Ø Patient eye shield, Laser Safety goggles, carrying case andmicrofiber cloth

Included in your purchase

Machine Standard & Key Features

Energency switch Key switch Display Handle

*Healing zone selection to match each patient needs

*Leave 95% to 0% intact

Different patterns & shapes for you to chose from

OPTIONAL Treatment head for Vaginal Rejuvenation & Tightening

Screen operation

• It is fractional button, click here enter fractional pattern interface.

•

•

•

For normal mode button, click enter pulse mode interface.

Settings button, click to enter setup interface.

For system information button, click enter button into system information interface.

• Using parameters button adjust, control laser output power is 0-30W.

• Using parameters button adjustment, control the laser action time from 0.1 ms to 10ms in each point of during the scanning process

Fractional interface

• Using parameters button adjustment, between point and next point control thescanning clearance time 1-5000ms during the scanning process.

• Using parameter adjustment, control the distance of fractional points betweenpoints 0.1-2.6 mm, has reached purpose of control dot matrix density.

• Using parameter adjustment, control fractional scanning way divided into threetypes: scanning spots from one side to another side.

Random sequence modes: scanning spot without order, random.

Parting mode: scanning spot with counterpart next scanning point keep fractional distanceis one half.

• Using parameter adjustment for control the fractional scanning number （1-20th）.

• Press 1-5 for the choice of digital storage space. Press save issave all the parameters in current page to change in the space, when using can alwayspress numeric button adjust.

Skin Resurfacing

• Using up and down add and subtract button adjust fractionalgraphics fluctuation in the direction of the largest Length is 0-20mm.

• Use for choose to scan graphics.

• After adjusting parameters, press ready button, then aim the scanner on the target area and ,press down on the foot pedal to activate scanner and fire laser.

• Click to return to main boundary.

To achieve best results, follow these steps

Normal interface

Selecting the POWER button, controls the laser output power for 0-30W or 0-60w (depending on your model purchase)

The MODE parameter adjustment, controls scanning and selectable in 3 modes

1. Single mode: trample down pedal switch after only launch a laser.

Duration range is 1-100ms.

2. Continuous mode: Fires the laser at a continuous rate with steady output3. Pulse mode: Fires the laser in pulse mode set by user which achieves

higher peak outputs

By pressing ready, the safety shutter is activated and shoots the laser with press of the footpedal

Click to return to main interface.

Controls depth and penetration of laser

Acts as a delay between laser being fired in seconds or microseconds

Treatment advantages

• Match patient needs to results

– Select healing zone volume (Density)

– Select volume treated (Spot Size)

– Select target depth (Epidermal or Dermal)

• Immediate results

– Removal of damaged skin

– Contracture via heat & ablation

• Continued long-term improvement

– Collagen remodeling and

Neocollagenesis

Select target depth (Epidermal or Dermal)

Scan Depth:20um-2000um adjustable

Before & After

Laser effect on the skin

After treatment (1 min)

Before treatment

After treatment

10 mins later

1

Before treatment

2

The first day

after treatment

3

The fourth day

after treatment

4

The 20th day

after treatment

Before treatment after 1st treatment after 2nd treatment

GAIN NOTICEABLE RESULTS ON THE FIRST TREATMENT

OPTIONAL Vaginal Treatment head

Scan and Cutting Heads

Working theory (Vaginal tightening & Rejuvenation)

Using an articulating arm probe with 360 rotation, and applying 50-70℃ heat at a controlled depth inside the vaginal mucosa - stimulates collagen contraction, restructuring and regeneration; promotes collagen fiber proliferating, remodeling; improves vaginal mucosa microcirculation; increases cell secretion and dynamic reaction function; corrects PH value of vaginal internals; thereby improving tissue elasticity. The result is a rejuvenated and restored vagina for a renewed patients improved sexual life and satisfaction.

Applications:1.Removes all kinds of wrinkles (brow veins, glabellas veins, neck veins, pregnancy veins and so on)

2.Strengthen, tighten skin, face promotion, Skin rejuvenation

3.Age spots and blemishes, acne and speckle treatment: blain acne, scabby acne, allergic acne, papilla acne, improving the appearance of liquidic skin and acne pit.

4.Treat telangiectasis

5.Repair of sun damaged skin on the face, neck, shoulders and hands

6.Skin excrescence, such as wart, etc.

7.Vaginal tightening

Contraction

Before and After

Certifications

ISO9001:2008

ISO13485:2003

Two models to choose from:

Starlight 30 - 30 Watts

Starlight 60 - 60 Watts

Options:Vaginal Tightening Attachment

Contact your dealer for more details

For product inquiry & sales Contact your Dealers belowBiomed Specialty Group, LLC 866-31-LASERContact: Maui or KenManufacturer website: novuslase.net, novuslase.com

We provide training, service, warranty included in your purchase.