Aeia Eooufa Training Proposal

8/10/2019 Aeia Eooufa Training Proposal

1/10

Title : Oil & Gas Metering CourseProposal No. : AEIA-EOOUFARev No. : 0

Issue date : 19/Nov/2013

To: M/s Weights and Measures Agency

Attention: Bernardina Mwijarubi

+255 784 955956Weights and Measures Agency

Oil and Energy Unit

P.O. 313,

Dar es salaam

Tanzania

Subject: Proposal for Oil & Gas Metering Course

Dear Bernardina,

Reference to your mail dates November 02 2013 for the enquiry for Oil & Metering Course, Emerson

Process Management is pleased to provide the attached proposal for your review and consideration.

After careful review of your request, our Proposals Team has developed the attached Quotation as the

best match for the provided specifications.

We are pleased to provide the attached quotation for your review and consideration for the class room

training for Oil & Gas Metering Course for your Engineers and Technicians.

Please review the attached proposal. If any of the quoted items do not match your expectations, please

allow me to work with you to adjust our proposed solution in line with your expectations.

Please do not hesitate to contact us should you need further information.

Sincerely,

Sherry Mathew Jacob

Date:Nov 19th

, 2013


2/10


3/10

Title : Oil & Gas Metering CourseProposal No. : AEIA-EOOUFA

Rev No. : 0


Page 3 of 10

Emerson Process Management

P.O. Box: 105958Abu Dhabi-United Arab Emirates,

Tel +971 2 697 2000, Fax +971 2 555 0364

1 OVERVIEW .......................................................................................................................... 4

2 OBJECTIVES OF THE COURSE .............................................................................................. 4

3 COURSE CONTENTS ............................................................................................................ 4

4 COURSE DURATION ............................................................................................................ 6

5 SCOPE OF SUPPLY AND DELIVERABLES ............................................................................... 7

5.1 Scope of Supply.................................................................................................................. 7

5.2 Deliverables ....................................................................................................................... 7

6 EXCLUSIONS ....................................................................................................................... 7

7 COMMERCIAL PROPOSAL ................................................................................................... 8

8 GENERAL TERMS & CONDITIONS ....................................................................................... .9


4/10


Rev No. : 0


Page 4 of 10



Tel +971 2 697 2000, Fax +971 2 555 0364

1 Overview

This proposal is for the Oil & Gas Metering System Training at Emerson, Abu Dhabi. This course has been

designed to provide an understanding of the system overview, Components, operational procedure,

installation, configuration of the system.

2 Objectives of the Course

The course addresses the concepts of custody transfer metering, principle of allocation in shared

facilities, and the general operating principles of custody transfer instruments:

Flow meters (orifi ce, turbine, ultrasonic, venture, corilis)

Densitometers

Pressure / temperature / differential transmitters

Automatic samplers

BS & W measurements

Chromatography Physics of natural gas mixtures

Calculation routines and verification of flow computers

Implementation of international standards

Generic operating and reporting procedures

The function of the pipeline and regulatory auditors

Review of typical fault conditions

3 Course Agenda

1. Introduction to Metering

METCO Who We Are

Tyro 010 Introduction

Tyro 020 Why Meter

Tyro 600 Allocation

Tyro 620 Metering Management

Tyro 650 Traceability

Tyro 655 Standards

Tyro 800 Alternative Meters

Tyro 910 Normal Uncertainty

2. Appreciation

Tyro 015 Appreciation Introduction

Tyro 025 Why Meter Appreciation

Tyro 030 Metering Techniques

Tyro 505 Understanding Flow Computers

Tyro 605 Allocation Appreciation

Tyro 720 Measurement Integration


5/10


Rev No. : 0


Page 5 of 10



Tel +971 2 697 2000, Fax +971 2 555 0364

3. Design

Tyro 1010 Design Criteria

Tyro 1020 Flow Meter Installations

Tyro 1030 Orifice Installation

Tyro 1040 Meter Proving Tyro 1050 Hydrocarbon Sampling

Tyro 1090 Defining a Meter Station

4. Flow Computers

Tyro 500 Flow Computer Overview

Tyro 520 Oil Flow Computer

Tyro 525 Testing Oil Flow Computer

Tyro 530 Prover Computer

Tyro 540 Gas Flow Computer

Tyro 545 Testing Gas Flow Computer Tyro 550 Coriolis Flow Computer

Tyro 560 mpusm Flow Computer

Tyro 580 Metering Supervisory Flow Computers

5. Gas Metering

Tyro 100 Orifice Meter

Tyro 105 Gas metering overview

Tyro 110 Gas Flow Equation

Tyro 115 Metering instruments

Tyro 150 Gas chromatograph

Tyro 160 The gas densitometer

Tyro 165 RD Analyser

Tyro 180 Orifice Carriers

Tyro 210 Gas Characteristics

Tyro 270 Dew Point

Tyro 590 Wet Gas Metering

Tyro 810 Multipath Ultrasonic

6. Oil Metering

Tyro 300 Turbine Meter

Tyro 305 PD Meter Tyro 330 Density

Tyro 350 Grab Samplers

Tyro 380 BS and W

Tyro 400 Meter Proving

Tyro 450 Control Charts

Tyro 480 Master Meter Proving


6/10


Rev No. : 0


Page 6 of 10



Tel +971 2 697 2000, Fax +971 2 555 0364

Tyro 700 Static Tanks

Tyro 850 Coriolis

7. Procedures

Tyro 040 DTI Regulation

Tyro 660 Reporting Procedures

Tyro 665 Audit Trail

Tyro 670 Operating Procedures

Tyro 680 Fault Conditions

8. Uncertainty

Tyro 900 Uncertainty of Uncertainty

Tyro 902 Mathematics of Uncertainty

Tyro 904 Sources of Uncertainty Tyro 906 Evaluating Uncertainty Component

Tyro 908 MathCad Pro Forma

Tyro 920 General Uncertainty

Tyro 930 Statistical Uncertainty

Tyro 940 Monte Carlo Simulation

Tyro 950 Metering Uncertainty

Tyro 955 Intrinsic Calc Data

Intended Audience:

The course is focused towards the following personnel:

Maintenance technicians

Supervisors

Engineers

Course Prerequisites:

A basic knowledge of metering operations or maintenance is necessary for attendance on this course.

4 Course duration

The course duration is for 5 days.


7/10


Rev No. : 0


Page 7 of 10



Tel +971 2 697 2000, Fax +971 2 555 0364

5 Scope of Supply

5.1 Scope of Supply

COURSE LOCATION: ABU DHABIThe courses will be delivered at our Abu Dhabi premises

indicated on the map below.

5.2 Deliverables

Training Materials for each participant.

Certificate of completion of the course on successful completion of the course.

6 Exclusions

Flights, Accommodation, Local Transportation and Subsistence for trainees.


8/10


Rev No. : 0


Page 8 of 10



Tel +971 2 697 2000, Fax +971 2 555 0364

7 Commercial Proposal

Price Summary

Item DescriptionNo. of

Days

Maximum

batch Size

Unit Price

(USD)

1 Oil & Gas Metering Course 5 8 $53,885.00/batch

Item Description Unit Rate (USD)

2 Additional Trainee Charges $3500.00/trainee

Notes:

Price quoted for training at Flow Training Center, Emerson Abu Dhabi, UAE.

Notice of 6 weeks with firm PO needed prior to scheduling training.

Training date to be finalized on a mutually agreed date.

Lunch and Refreshment will be provided for the trainees.

Invoice in full for the training course will be issued one week before the start of the training

course.

When ordering, please refer to our proposal number,

Emerson Process Management has assembled the following list of individuals to assist you in answering any ques

you may have about our products and services, the preparation of this proposal, and the Purchase Order subm

Please feel free to contact these individuals as needed:

Submit Purchase Order To Sales RepresentativeFlow Unit Chris GrobbelaarEmerson Process ManagementDistribution LimitedAbu Dhabi


Phone:+971 4 8118100 Phone:+27(0)11 451 3700Fax:+971 4 8865465 E-mail: [email protected]:[email protected] Mobile: +27(0)82 767 3909

Any Contract resulting from this Quotation shall become effective only upon the date of acceptance of

Buyers order on Sellers Acknowledgement of Order form or upon the date of fulfillment of all conditions

precedent stipulated in the Contract, whichever is the later (the Effective Date of Contract).
mailto:%[email protected]:%[email protected]:%[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:%[email protected]


9/10


10/10


Rev No. : 0


Page 10 of 10


P.O. Box: 105958Ab Dh bi U it d A b E i t

such Services. Goods or Services repaired, replaced or corrected in accordance with this Clause 10.1shall be subject to the foregoing warranty for the unexpired portion of the Warranty Period or for ninetydays from the date of their return to Buyer (or completion of correction in the case of Services),whichever expires the later.10.2Goods or Services sourced by Seller from a third party (not being a Seller Affiliate) for resale toBuyer shall carry only the warranty extended by the original manufacturer.10.3 Notwithstanding Clauses 10.1 and 10.2, Seller shall not be liable for any defects caused by: fairwear and tear; materials or workmanship made, furnished or specified by Buyer; non-compliance withSeller's storage, installation, operation or environmental requirements; lack of proper maintenance; anymodification or repair not previously authorised by Seller in writing; nor the use of non-authorisedsoftware or spare or replacement parts. Seller's costs incurred in investigating and rectifying suchdefects shall be paid by Buyer upon demand. Buyer shall at all times remain solely responsible for theadequacy and accuracy of all information supplied by it.

10.4 Subject to Clause 12.1, the foregoing constitutes Seller's sole warranty and Buyer's exclusiveremedy for breach thereof. No representations, warranties or conditions of a ny kind, express or implied,shall apply as to satisfactory quality, merchantability, fitness for any particular purpose or any othermatter with respect to any of the Goods or Services.

11. PATENT, ETC. INFRINGEMENT:11.1 Subject to the limitations set forth in Clause 12, Seller shall indemnify Buyer in the event of anyclaim for infringement of Letters Patent, Registered Design, Design Right, Trade Mark or Copyright("Intellectual Property Rights") existing at the date of formation of the Contract arising from the use orsale of the Goods, against all reasonable costs and damages awarded against Buyer in any action forsuch infringement, or for which Buyer may become liable in any such action, provided always thatSeller shall not be liable to so indemnify Buyer in the event that:(i) such infringement arises as a result of Seller having followed a design or instruction furnished orgiven by Buyer, or the Goods having been used in a manner or for a purpose or in a country notspecified by or disclosed to Seller prior to the date of the Contract or in association or combination withany other equipment or software, or(ii) Seller has at its expense procured for Buyer the right to continue to use the Goods or has modifiedor replaced the Goods so that the Goods no longer infringe.(iii) Buyer has failed to give Seller the earliest possible notice in writing of any claim made or to bemade or of any action threatened or brought against Buyer and/or Buyer has failed to permit Seller, atSeller's expense, to conduct and control any litigation that may ensue and all negotiations for asettlement of the claim, or(iv) Buyer has made without Seller's prior written consent any admission which is or may be prejudicial

to Seller in respect of any such claim or action, or(v) the Goods have been modified without Seller's prior written authorisation. 11.2 Buyer warrants that any design or instructions furnished or given by it shall not cause Seller toinfringe a ny Intellectual Property Rights in the performance of Seller's obligations under the Contractand shall indemnify Seller against all reasonable costs and damages which Seller may incur as a resultof any breach of such warranty.

12. LIMITATION OF REMEDY AND LIABILITY:12.1 Notwithstanding any other provision of the Contract, but subject to Clause 12.2 and withoutprejudice to Clause 12.3, Sellers and Seller Affiliates combined maximum aggregate liability for anyand all losses, liabilities, expenses (including legal expenses), damages, claims or actions arisingunderor in connection with this Contract or any collateral contract between the parties, arising in or by virtueof breach of contract, tort (including negligence), misrepresentation, breach of statutory duty, strictliability, infringement of Intellectual Property Rights or otherwise, shall in no circumstances exceed theContract Price.12.2 Notwithstanding any other provision of the Contract but without prejudice to Clause 12.3, Sellerand Seller Affiliates shall not be liable under or in connection with this Contract or any collateralcontract between the parties, for any loss of income, loss of actual or anticipated profits, loss ofanticipated savings, loss of use, loss of production, loss of business, loss of contracts, loss of goodwillor reputation, loss of, damage to or corruption of data, or any indirect or consequential loss or damageof any kind, howsoever caused and whether arising in or by virtue of breach of contract, tort (includingnegligence), misrepresentation, breach of statutory duty, strict liability, infringement of IntellectualProperty Rights or otherwise whether or not such loss or damage was foreseeable or in the

contemplation of the parties.12.3Nothing in this Contract shall exclude o r in any way limit Sellers or Sellers Affiliates liability forfraud or for any liability to the extent that such liability may not be limited or excluded as a matter of law.

13. STATUTORY AND OTHER REGULATIONS:13.1 If Seller's obligations under the Contract shall be increased or reduced by reason of the making oramendment after the date of Seller's quotation of any law or any order, regulation or bye-law having theforce of law that shall affect the performance of Seller's obligations under the Contract, the ContractPrice and delivery period shall be a djusted accordingly and/or performance of the Contract suspendedor terminated, as appropriate.13.2 Except to the extent otherwise required by applicable law, Seller shall have no responsibility forthe collection, treatment, recovery or disposal of (i) the Goods or any part thereof when they aredeemed by law to be 'waste' or (ii) any items for which the Goods or any part thereof are replacements.If Seller is required by applicable law, including waste electrical and electronic equipment legislation,European Directive 2002/96/EC (WEEE) and related legislation in EU Member States, to dispose of'waste' Goods or any part thereof, Buyer shall, unless prohibited by applicable law, pay Seller, inaddition to the Contract Price, either (i) Seller's standard charge for disposing of such Goods or (ii) ifSeller does not have such a standard charge, Seller's costs (including all handling, transportation anddisposal costs and a reasonable mark-up for overhead) incurred in disposing of such Goods.

13.3 Buyer's personnel shall, whilst on Seller's premises, comply with Seller's applicable siteregulations and Seller's reasonable instructions, including but not limited to those relating to safety,security and e lectrostatic discharge.

14. COMPLIANCE WITH LAWSBuyer agrees that all applicable import, export control and sanctions laws, regulations, orders andrequirements, as they may be amended from time to time, including without limitation those of the Unite dStates, the European Union and the jurisdictions in which Seller and Buyer are established or from whichitems may be supplied, and the requirements of any licenses, authorisations, general licences or licenceexceptions relating thereto will apply to its receipt and use of hardware, software, services andtechnology. In no event shall Buyer use, transfer, release, export or re-export any such hardware,

software or technology in violation of such applicable laws, regulations, orders or requirements or therequirements of any licences, authorisations or licence exceptions relating thereto. Buyer agreesfurthermore that it shall not engage in any activity that would expose the Seller or any of its affiliates to arisk of penalties under laws and regulations of any relevant jurisdiction prohibiting improper payments,including but not limited to bribes, to officials of any government or of any agency, instrumentality orpolitical subdivision thereof, to political parties or political party officials or candidates for public off ice, orto any employee of any customer or supplier. Buyer agrees to comply with all appropriatelegal, ethicaand compliance requirements.

15. DEFAULT, INSOLVENCY AND CANCELLATION:Seller shall be entitled, without prejudice to any other rights it may have, to cancel the Contract forthwith,wholly or partly, by notice in writing to Buyer, if (a) Buyer is in default of any of its obligations under theContract and fails, within 30 (thirty) days of the date of Seller's notification in writing of the existence ofthe default, either to rectify such default if it is reasonably capable of being rectified within such period or,if the default is not reasonably capable of being rectified within such period, to take action to remedy thedefault or (b) on the occurrence of an Insolvency Event in relation to Buyer. "Insolvency Event" in relationto Buyer means any of the following: (i) a meeting of creditors of Buyer being held or an arrangement orcomposition with or for the benefit of its creditors being proposed by or in relation to Buyer; (ii) a chargeholder, receiver, administrative receiver or similar person taking possession of or being appointed over orany distress, execution or other process being levied or enforced (and not being discharged within sevendays) on the whole or a material part of the assets of Buyer; (iii) Buyer ceasing to carry on business orbeing unable to pay its debts; (iv) Buyer or its directors or the holder of a qualifying floating charge givingnotice of their intention to appoint, or making an application to the court for the appointment of an

administrator; (v) a petition being presented (and not being discharged within 28 days) or a resolutionbeing passed or an order being made for the administration or the winding-up, bankruptcy or dissolutionof Buyer; or (vi) the happening in relation to Buyer of an event analogous to any of the above in any

jurisdiction in which it is incorporated or resident or in which it carries on business or has assets. Sellershall be entitled to recover from Buyer or Buyer's representative all cos ts and damages incurred by Selleras a result of such cancellation, including a reasonable allowance for overheads and profit (including butnot limited to loss of prospective profits and overheads).

16. SUPPLEMENTARY TERMS AND CONDITIONS:If the Goods comprise or include a control system, Seller's Supplementary Terms and Conditions

Applicable to the Supply of Control Systems and Related Services shall apply to the control system andrelated services only. Such Supplementary Terms and Conditions shall take precedence over theseStandard Terms and Conditions of Sale; copies available on request.

17. MISCELLANEOUS:17.1 No waiver by either party with respect to any breach or default or of any right or remedy and nocourse of dealing, shall be deemed to constitute a continuing waiver of any other breach or default or ofany other right or remedy, unless such waiver be expressed in writing and signed by the party to bebound.17.2 If any clause, sub-clause or other provision of the Contract is invalid under any statute or rule oflaw, such provision, to that extent only, shall be deemed to be omitted without affecting the validity of theremainder of the Contract.17.3Buyer shall not be entitled to assign its rights or obligations hereunder without the prior writtenconsent of Seller.17.4 Sellerenters into theContract as principal. Buyer agrees to look only to Seller for due performanceof the Contract.17.5GOODS AND SERVICES PROVIDED HEREUNDER ARE NOT SOLD OR INTENDED FOR USEIN ANY NUCLEAR OR NUCLEAR RELATED APPLICATIONS. Buyer (i) accepts Goods and Services inaccordance with the foregoing restriction, (ii) agrees to communicate such restriction in writing to any andall subsequent purchasers or users and (iii) agrees to defend, indemnify and hold harmless Seller andSellers Affiliates from any and all claims, losses, liabilities, suits, judgements and damages, includingincidental and consequential damages, arising from use of Goods and Services in any nuclear or nuclearrelated applications, whether the cause of action be based in tort, contract or otherwise, includingallegations that the Seller's liability is based on negligence or strict liability.17.6 The Contract shall in all respects be construed in accordance with the laws of England and Walesexcluding, however, any effect on such laws of the 1980 Vienna Convention on Contracts for theInternational Sale of Goods and to the fullest extent permitted by law, shall be without regard to anyconflict of laws or rules which might apply the laws of any other jurisdiction. Buyer submits tothe jurisdiction of the E nglish courts for all disputes and claims arising out of the Contract withoutprejudice to the Seller's right to bring proceedings in any other court having jurisdiction where the Buyeris resident or has assets from time to time.17.7 The headings to the Clauses and paragraphs of the Contract are for guidance only and shall notaffect the interpretation thereof.17.8 All notices and claims in connection with the Contract must be in writing.

Emerson Process Management Distribution LimitedAbu DhabiRegistered Office:P.O. Box 105958Abu DhabiUAE

Documents

Aeia Eooufa Training Proposal