129
Release Notes Release Date Enhancements Bugs Fixed 2016-08-11 2 6 2016-07-13 13 6 2016-06-15 7 3 2016-06-03 4 1 2016-05-30 1 2 2016-05-19 3 1 2016-05-12 1 2 2016-04-12 4 9 2016-04-05 3 7 2016-03-24 1 2 2016-03-18 1 3 2016-03-11 2 3 2016-03-04 2 10 2016-02-24 22 83 Total 66 138 Aegis v0.20.078.0811 Release Date: 2016-08-11 Interim Release Enhancements 1. Upgraded Aegis to the .Net v4.6 Framework series. 2. It is now possible to draw the holes in the ring view in the reports so that the hole numbers are visible against a hatch. (Ticket 16670)

aegis release notes - 2016-08-11downloads-cus.dataminesoftware.com/UG/AEGIS/Aegis...Aegis v0.20.078.0811 Release Date: 2016-08-11 Interim Release Enhancements 1. Upgraded Aegis to

  • Upload
    others

  • View
    6

  • Download
    0

Embed Size (px)

Citation preview

  • Release Notes

    Release Date Enhancements Bugs Fixed

    2016-08-11 2 6

    2016-07-13 13 6

    2016-06-15 7 3

    2016-06-03 4 1

    2016-05-30 1 2

    2016-05-19 3 1

    2016-05-12 1 2

    2016-04-12 4 9

    2016-04-05 3 7

    2016-03-24 1 2

    2016-03-18 1 3

    2016-03-11 2 3

    2016-03-04 2 10

    2016-02-24 22 83

    Total 66 138

    Aegis v0.20.078.0811 Release Date: 2016-08-11

    Interim Release

    Enhancements

    1.  Upgraded Aegis to the .Net v4.6 Framework series. 2.  It is now possible to draw the holes in the ring view in the reports so that the hole numbers are visible against a hatch. (Ticket 16670)

  • Aegis Help 1

    2016 iRing Inc.

    Issues

    Designer Issues

    1.  If a ring only contained a slot and if that slot were part of a blast the isosurface functionality wouldn't function.

    2.  In the plan view the slot boundary/outline would be visible even though the plane did not intersect the slot. (Ticket 16634)

    3.  When importing survey holes using the manual import option it would fail when multiple holes are were un-named. (Ticket 16673)

  • Aegis Help 2

    2016 iRing Inc.

    4.  In the timing module when some rings were uncharged and some were un-primed an exception could occur if the user clicked the stope checkbox to attempt to automatically time

    the blast. (Ticket 16678)

    5.  On the new project screen the folder to the new project screen could store a path that is not accessible (security restrictions, doesn't exist, etc.). If this was the case Aegis would crash after

    that anytime a new project was created. (Ticket 16682)

    6.  The hole listings table would not allow an empty text string to be used as a name.

    Analyzer Issues

    1.  N/A

    Aegis v0.20.074.0713 Release Date: 2016-07-13

    Interim Release

    Enhancements

    2.  Added a rounding option for hole length labels in the Ring View report item. (Ticket 16508) 3.  Added a rounding option for Dimension Report item. (Ticket 16508) 4.  Added "Export Name" property to all tables in the reports. This is used by the export report tables to csv files method to name the csv files when the tables are converted to csv files. (Ticket

    16509)

    5.  Added the ability to display different explosives in different colors. This affects all displays including reports. The display color is set by changing the database entry. (Ticket 14505)

    6.  Added the ability to display different primers in different colors. This affects all displays including reports. The display color is set by changing the database entry. (Ticket 14505)

  • Aegis Help 3

    2016 iRing Inc.

    7.  Add an Auto-Save option that causes Aegis to save the project after milestones have been passed such as importing wireframes or creating a ring set. (Ticket 15264)

    8.  Vertical alignment option has been added to text report items. (Ticket 16569) 9.  Added the ability to lock report items. This will prevent the items from being moved or resized accidentally once they are placed on a report page. (Ticket 16564)

    10. Added the ability to change the primers from the context menu for the ring view window.

    (Ticket 16556)

    11. Added the ability to change the detonators from the context menu for the ring view window.

    (Ticket 16556)

    12. Added the ability to drag a hole in the ring view window parallel from its previous position. A

    new middle position glyph has been added to the hole when selected. If the user drags the hole

    at this position, the hole moves parallel to its previous position. If you hold the CTRL key down

    while dragging, the hole maintains its length. (Ticket 16557)

  • Aegis Help 4

    2016 iRing Inc.

    13. Added the ability to double-click on a table in the reports and have the column/row editor

    display. This only applies to report tables that have editable columns/rows. It saves the user from

    having to find the columns/rows property in the property grid and clicking on the ellipsis button

    to launch the window. (Ticket 16579)

  • Aegis Help 5

    2016 iRing Inc.

    14. Added the ability to entire mine location information directly in the New Project Window.

    Simply type in a new location in the drop down or select an existing one from the list. After that

    you are free to type in new values for:

    a. Level

    b. Work Place

    c. Division/Beat

    d. Stope

    e. Orebody

    Issues

    Designer Issues

    1.  An index out of range exception could occur when loading a block model into Aegis when the xInc, yInc and zInc were implicit fields (Ticket 16474)

    2.  A null reference exception would occur in the Construct Polylines Window when the point is cleared from a particular ring (Ticket 16506)

    3.  When using the export report tables to csv files method on a report, empty tables could be exported to csv. Now empty tables will be ignored. (Ticket 16509)

    4.  If there were multiple charges within a hole, the option to delete a charge from the hole using the right-click context menu would fail. (Ticket 16548)

    5.  An exception would occur when attempting to add a primer to an explosive charge if no primer had be set in the create new ring set window.

    6.  Attempting to add a primer or detonator when the were not set from the create new ring set window would cause an exception.

    Analyzer Issues

    1.  N/A

    Aegis v0.19.071.0615 Release Date: 2016-06-15

    Interim Release

    Enhancements

    1.  More New Icons. 2.  Updated the specially formatted .dm file so that it can accept the hole pivot point. 3.  Added new columns to the Ring Summary Table

    a.  Length_Drilled_Total - Displays the total length drilled for the particular ring

    b.  Length_Drilled_Slot - Displays the total length drilled of all the slot holes for the

    particular ring

    c.  Length_Drilled_No_Slot - Displays the total length drilled of all the holes (except slot

    holes) for the particular ring

    d.  Length_Remaining_No_Slot - Starting from the first ring displays the total length

    drilled (excluding slot holes) minus the cumulative sum of lengths drilled from the

  • Aegis Help 6

    2016 iRing Inc.

    previous rings

    e.  Length_Remaining - Starting from the first ring displays the total length drilled minus

    the cumulative sum of lengths drilled from the previous rings

    f.  Tons_Remaining - Starting from the first ring displays the total tonnage minus the

    cumulative sum of tonnages from the previous rings (Has to be evaluated before this can

    be displayed)

    4.  Updated the custom formula field in the Ring Summary Table with the same values as indicated by the new columns

    a. TotalLengthDrilled - Displays the total length drilled for the particular ring

    b. TotalLengthDrilled_No_Slot - Displays the total length drilled of all the holes (except

    slot holes) for the particular ring

    c. TotalLengthDrilled_Slot - Displays the total length drilled of all the slot holes for the

    particular ring

    d. CalculateTotalLengthRemaining - Starting from the first ring displays the total length

    drilled minus the cumulative sum of lengths drilled from the previous rings

    e. CalculateTotalLengthRemaining_NoSlot - Starting from the first ring displays the total

    length drilled (excluding slot holes) minus the cumulative sum of lengths drilled from the

    previous rings

    f. CalculateTonsRemaining - Starting from the first ring displays the total tonnage minus

    the cumulative sum of tonnages from the previous rings (Has to be evaluated before this

    can be displayed)

    5.  Added the ability to manually time the individual holes in the slot (This is an interim measure as this was not possible in previous versions of Aegis)

    6.  Added a link and a graphical option to control the hole offset mode when creating a new ring set.

    7.  Ring Table - Added ExplosiveDensity to the Custom Formula column.

    Issues

  • Aegis Help 7

    2016 iRing Inc.

    Designer Issues

    1.  When an exception occurred it was possible to encounter another error indicating that there was insufficient permissions to save the project file. This was due to Aegis attempting to save a

    file to the recovery folder. (Ticket 16394)

    2.  When using a lot of fixed pivots and parallel holes, Aegis would only drill from the first three pivots ignoring everything else. Now Aegis will properly choose fixed pivots based on the parallel

    hole requirement if it can. (Ticket 16418)

    3.  A null reference exception could occur in the the blast properties window.

    Analyzer Issues

    1.  N/A

    Aegis v0.19.069.0603 Release Date: 2016-06-03

    Interim Release

    Enhancements

    2.  Updated icons. 3.  Preferences - A True Offset added for ore contacts. Now drill holes can be offset from an ore contact by the so-called true offset. (Ticket 15485)

    4.  Added the ability to allow the background color of a mesh to have its opacity changed. (Ticket 16008)

    5.  Added the ability to use custom hatch patterns. (Ticket 16236)

    Issues

  • Aegis Help 8

    2016 iRing Inc.

    Designer Issues

    1.  In the last version, Spanish and Russian versions of Aegis would lose track of the iRing license system.

    Analyzer Issues

    1.  N/A

    Aegis v0.19.068.0530 Release Date: 2016-05-30

    Interim Release

    Enhancements

    2.  Updated icons.

    Issues

    Designer Issues

    1.  When adding manual holes to the ring view it was possible that a 0 length hole could be generated an an exception would occur.

    2.  When windows font scaling was set to something other than 100%, the Rename holes and rings window would have some of the text fields truncated or hidden. (Ticket 16338).

    Analyzer Issues

    1.  N/A

    Aegis v0.19.067.0519 Release Date: 2016-05-19

    Interim Release

    Enhancements

    2.  Updated icons 3.  Added the ability to change the default root folder that Aegis uses.

    4.  Added csv file format to the list of survey file formats that Aegis can import.

    Issues

    Designer Issues

    1.  In timing if there were no holes on a slot ring, the slot would be considered unprimed even if it was clearly primed.

    Analyzer Issues

  • Aegis Help 9

    2016 iRing Inc.

    1.  N/A

    Aegis v0.19.066.0512 Release Date: 2016-05-12

    Interim Release

    Enhancements

    2.  New Icons were added

    Issues

    Designer Issues

    1.  The Dump column in the ring summary table was not obeying the rounding rules if they were set. It would always use 2 decimal places.

    2.  The Dump variable in the custom formula columns was not expressed to full machine precision. It was being rounded to 2 decimal places. This would cause some discrepancies

    between calculations in a spreadsheet and the column.

    Analyzer Issues

    1.  N/A

  • Aegis Help 10

    2016 iRing Inc.

    Previous Releases v0.19.065.0505 (2016-05-05) - Fully Localized ............................................................. 12 v0.18.058.0412 (2016-04-12) ........................................................................................ 18 v0.17.057.0405 (2016-04-05) ........................................................................................ 19 v0.17.055.0324 (2016-03-24) ........................................................................................ 20 v0.17.054.0318 (2016-03-18) ........................................................................................ 21 v0.17.053.0311 (2016-03-11) ........................................................................................ 22 v0.17.051.0304 (2016-03-04) ........................................................................................ 23 v0.17.050.0224 (2016-02-24) - Fully Localized Release ............................................... 24 v0.16.034.1126 (2015-11-26) ........................................................................................ 34 v0.15.029.1020 (2015-10-20) ........................................................................................ 36 v0.12.026.0810 (2015-08-10) ........................................................................................ 45 v0.12.025.0722 (2015-07-22) ........................................................................................ 47 v0.11.021.0629 (2015-06-29) ........................................................................................ 49 v0.10.019.0526 (2015-05-26) ........................................................................................ 51 v0.10.017.0506 (2015-08-13) ........................................................................................ 53 v0.9.015.0401 (2015-04-01) .......................................................................................... 61 v0.9.014.0317 (2015-03-17) .......................................................................................... 63 v0.9.013.0313 (2015-03-13) .......................................................................................... 64 v0.7.009.0223 (2015-02-23) .......................................................................................... 69 v0.7.008.0123 (2015-01-23) .......................................................................................... 71 Older Release Notes ..................................................................................................... 73

    v0.7.006.1212 (2014-12-12) .................................................................................... 74 v0.7.004.1121 (2014-11-21) .................................................................................... 80 v0.7.001.1030 (2014-10-30) .................................................................................... 82 v0.6.531.1030 (2014-10-30) .................................................................................... 83 v0.6.530.1024 (2014-10-24) .................................................................................... 84 v0.6.529.1017 (2014-10-17) .................................................................................... 85 v0.5.527.1003 (2014-10-03) .................................................................................... 87 v0.5.517.825 (2014-08-25) ...................................................................................... 88 v0.5.328.722 (2014-07-22) ...................................................................................... 90 v0.5.142.709 (2014-07-09) ...................................................................................... 91 v0.5.95.626 (2014-06-26) ........................................................................................ 93 v0.5.63.612 (2014-06-12) ........................................................................................ 95 v0.5.15.605 (2014-06-05) ........................................................................................ 96 v0.5.1.602 (2014-06-02) .......................................................................................... 97 v0.3.580.509 (2014-05-09) ...................................................................................... 99 v0.3.569.508 (2014-05-08) .................................................................................... 100 v0.3.560.428 (2014-04-28) .................................................................................... 101 v0.3.422.226 (2014-02-26) .................................................................................... 103 v0.3.330.203 (2014-02-03) .................................................................................... 105 v0.3.217.117 (2014-01-17) .................................................................................... 107 v0.3.1.1213 (2013-12-13) ...................................................................................... 110 v0.2.619.1122 (2013-11-22) .................................................................................. 113 v0.2.550.1112 (2013-11-12) .................................................................................. 115 v0.2.372.1025 (2013-10-25) .................................................................................. 118

  • Aegis Help 11

    2016 iRing Inc.

    v0.2.316.1015 (2013-10-15) .................................................................................. 120 v0.2.201.924 (2013-09-24) .................................................................................... 122 v0.2.188.920 (2013-09-20) .................................................................................... 123 v0.1.1000.767 (not released) ................................................................................ 126 v0.1.1000.746 (2013-08-13) .................................................................................. 127

  • Aegis Help 12

    2016 iRing Inc.

    v0.19.065.0505 (2016-05-05) - Fully Localized

    Aegis v0.19.065.0505 Release Date: 2016-05-05

    Fully Localized to Spanish and Russian.

    Enhancements

    1.  Slot Editor - Updated slot editor to allow holes to be numbered. (Ticket 15315) 2.  Export options were added to the Scenario context menu. (Ticket 15487) 3. Add the ability to copy the 3D view to the clipboard. (Ticket 15693)

    4. Added the ability to export report tables to csv files. (Ticket 15488)

    5. Updated icons - Aegis is in the process of having the icons updated throughout the program.

    This will proceed over the course of a few versions.

    6. Updates to various icons and controls

    7. Updated the Editable Table Report Item. (Ticket 15859)

    8. Updated the Wireframe Properties Window accessed from here.

    9. Added a new way to build polylines. Click on the icon to view a video: . (Ticket 14669)

    10. Added ability to estimate the ungassed charge column height for gassed emulsions. Click on

    the icon to view a video: . (Ticket 15503)

    11. Aegis now responds to the pgup & pgdn keyboard keys so that you can cycle through the rings

    when the ring view, plan view or long section view is active. (Ticket 15748)

    12. Updated the .dm and .dxf import so that they try to use the color palette selection stored in

    the respective file formats. (Ticket 14430)

    13. The user is able to copy the active ring holes to other rings. Useful for complex ring layouts that

    were done by manual manipulating the holes. (Ticket 16004)

    14. Slot - Added the ore contact offset to the New Slot Parameters window so now the slot will

    behave the same way as the holes.

    15. Symbols - Updated the functionality in the currentdate symbol so that it supports alternative

    date formats. (Ticket 15968)

  • Aegis Help 13

    2016 iRing Inc.

    16. Symbols - Added new symbol, evaluationresult, for the block model attribute results. (Ticket

    15985)

    17. Symbols - Added new sample templates that illustrate all of the available symbols that Aegis

    can process in the reports. They are available in the "iRing Aegis" folder under report templates.

    a. General Symbols

    b. Current Date

    c. Scenario Symbol Examples

    d. Blast Symbol Examples

    e. Ringset Symbol Examples

    f. Ring Symbol Examples

    18. Ring Summary Table - Added new columns for the ring evaluation results.

    19. Hatching - Added the ability to add hatching patterns to wireframes in the reports. They are

    available from the wireframe properties by adjusting the Report Style Settings of the Display

    Settings Tab. (Ticket 14437)

  • Aegis Help 14

    2016 iRing Inc.

    20. Symbols - Added new mine location symbols: location.name, location.level, location.orebody,

    location.workplace and location.division

    21. Ring Summary Table - Added new columns: ReferenceX, ReferenceY and ReferenceZ which

    can be used to display the x,y and z coordinate of the reference line intersection with the ring.

    22. Import rings and holes - The user is able to import rings and holes using a specially formatted

    .dm file. Click on the icon to view a video: .(Ticket 16054)

    23. Ring Summary Table - Added new custom formula variables: ReferenceX, ReferenceY and

    ReferenceZ (the x,y and z coordinate of the reference line intersection with the ring).

    24. Ring Summary Table - Added new custom formula variable: DumpFromVertical. It is the angle

    from the vertical that measures the ring dump. It is measured in radians and can be used directly

    in the formula trigonometric functions.

    25. Added some new sample projects.

    Issues

    Designer Issues

    1.  If the user zoomed in too far the view port in the slot editor would get stuck. Limited it to a scale less than 1:500000. (Ticket 15630)

    2.  Timing module would throw an exception when editing a row in the timing grid where nothing could/should be done. (Ticket 15627)

  • Aegis Help 15

    2016 iRing Inc.

    3.  In the timing module, some rings/ring sets/stopes that were part of a blast where not properly marked. (Ticket 15607)

    4.  IREDES export would crash if a ring contained an empty string for a name. 5.  Turning off the fixed pivot points in the re-drill window had no effect when the re-drill was opened again. (Ticket 15645)

    6.  Currency symbol in some parts of Aegis was not using the proper symbol from regional settings.

    7.  When a hole was deleted the other holes would not be renamed. 8.  If an exception occurred while creating new ringsets, the ring name would be set to an empty string. (Ticket 15644)

    9.  Reports - When pasting values in to the table editor, they would be duplicated. (Ticket 15670) 10. A key missing exception could occur when attempting to merge two wireframes. (Ticket

    15680)

    11. When loading a project, a duplicate key exception could be thrown. (Ticket 15706)

    12. Some of the tables in the reports were not being drawn properly. The border was too large in

    some cases. (Ticket 15726)

    13. The display survey group of buttons was not active if manual surveyed holes were imported.

    (Ticket 15750)

    14. If an entire ring was surveyed, the un-lock option would be available when it shouldn't have

    been. (Ticket 15751)

    15. The 3D view in the manual survey hole import was not docked properly and would not

    properly resize with the form. (Ticket 15757)

    16. Ring View - Moving the holes by using the CTRL key didn't work in all cases. In these cases a

    stope limit wasn't set and wasn't needed. (Ticket 15811)

    17. Changing the ring tolerance in the adjacent rings display options did not update the ring view

    until it was changed. (Ticket 15810)

    18. The isosurface window had trouble displaying previously selected colors. Now the color is

    properly remembered and displayed (Ticket 15805)

    19. Moving the holes with the ctrl key held down wasn't responding. (Ticket15811)

    20. More drilling parameters menu option in the hole layout table context menu didn't work.

    (Ticket 15820)

    21. When using fixed pivots in the Create New Ringsets window some rings in some projects

    would not be generated even though using the Re-Drill Rings Window would work as expected.

    (Ticket 15871)

    22. Slot Editor - An exception would occur if a hole diameter was a very small number when

    trying to create a new slot template. (Ticket 15877)

    23. Slot - In some cases the slot would not be placed even though it should fit. This happened

    because Aegis was not able to capture the correct pivots because the drill mast was hitting the

    wall and the location of the reference line was too close to the wall. Now Aegis will draw the slot

    with the missing holes. It will allow the planner to move the slot to a better position manually.

    (Ticket 15891)

    24. In the reports the wrong plan view could be displayed when there were multiple stopes in

    the scenario. (Ticket 15899)

    25. An out of range exception could be thrown when loading a project with some issues around

  • Aegis Help 16

    2016 iRing Inc.

    the scenarios. (Ticket 15910)

    26. Adding a charge to a hole could cause an exception. This occurred because the explosive

    wasn't set and they tried to manually add a charge to a hole. (Ticket 15912)

    27. When editing a polyline it was possible to delete all but one coordinate. A valid polyline

    should have at least to vertices. (Ticket 15912)

    28. If there was a keyword in the ring naming convention it wouldn't be processed when new

    rings were created.

    29. The option to create a new ring set from the existing planes option should not be available if

    there are no ring sets. (Ticket 15581)

    30. When using the re-drill rings option, Re-Load Rings window or the Re-Prime Rings window,

    deleted blasts were not restored. (Ticket 15932)

    31. For some reason when attempting to place a reference line in 3D, the view would become

    inverted. This only seemed to occur when the 3D display render option was set to high quality.

    (Ticket 15762)

    32. Append Rings did not update the list of classified wireframes if any of them were changed.

    For example, if you unselected a void mesh, the append rings would still think it were there.

    (Ticket 15449)

    33. When a slot was placed it was not possible to change its length by using the CTRL key and

    dragging its toe position. Now the slot behaves the same as other holes. (Ticket 15942)

    34. The exported laser line offsets and the ring marker lines were not all on the same elevation,

    it varied depending on the dump of the ring. Now the laser lines will be at the same elevation

    and the ring marker lines will be at the same elevation. (Ticket 15983)

    35. The incorrect state was being assigned when attempting to edit a slot resulting in odd

    behavior at times.

    36. Using the "Page Up" or "Page Down" keys while cycling through the rings in designer would

    cause a problem if the active window was the plan view. This is corrected and you are now able

    to use the keys with any Aegis window active.

    37. Hitting cancel on the isosurface window before the process completed would cause the

    window to become unresponsive.

    38. Hitting the cancel button or the close window button on the isosurface window after the

    isosurface was generated would cause a null reference exception.

    39. In some cases using the Rename All holes in all rings menu could cause a null reference

    exception. (Ticket 15993)

    40. When using the Russian or Spanish localization of Aegis there could be issues with the license

    system not properly activating the block model evaluation.

    41. Reports - Ring View Item - The hole labels would be drawn outside the bounding rectangle.

    (Ticket 16091)

    42. Extrude mesh from vertical plane creates extra mesh created two meshes instead of one.

    (Ticket 16098)

    43. Corrected an issued that caused the hatching styles to generate an exception when choosing

    one. (Ticket 16123)

    Analyzer Issues

    1.  When attempting a best fit mesh to a field, if there were no ore contact wireframes classified

  • Aegis Help 17

    2016 iRing Inc.

    an exception would occur. (Ticket 15610)

    2.  When a volume cannot be generated when doing a best field fit and exception occurred because no ore contact was set. (Ticket 15593)

  • Aegis Help 18

    2016 iRing Inc.

    v0.18.058.0412 (2016-04-12)

    Aegis v0.18.058.0412 Release Date: 2016-04-12

    Interim Release

    Enhancements

    1.  Added a new way to build polylines. (Ticket 14669) 2.  Added ability to estimate the ungassed charge column height for gassed emulsions. (Ticket 15503)

    3.  Aegis now responds to the pgup & pgdn keyboard keys so that you can cycle through the rings when the ring view, plan view or long section view is active. (Ticket 15748)

    4.  Updated the .dm and .dxf import so that they try to use the color palette selection stored in the respective file formats. (Ticket 14430)

    Issues

    Designer Issues

    1.  In the reports the wrong plan view could be displayed when there were multiple stopes in the scenario. (Ticket 15899)

    2.  An out of range exception could be thrown when loading a project with some issues around the scenarios. (Ticket 15910)

    3.  Adding a charge to a hole could cause an exception. This occurred because the explosive wasn't set and they tried to manually add a charge to a hole. (Ticket 15912)

    4.  When editing a polyline it was possible to delete all but one coordinate. A valid polyline should have at least to vertices. (Ticket 15912)

    5.  If there was a keyword in the ring naming convention it wouldn't be processed when new rings were created.

    6.  The option to create a new ring set from the existing planes option should not be available if there are no ring sets. (Ticket 15581)

    7.  When using the re-drill rings option, Re-Load Rings window or the Re-Prime Rings window, deleted blasts were not restored. (Ticket 15932)

    8.  For some reason when attempting to place a reference line in 3D, the view would become inverted. This only seemed to occur when the 3D display render option was set to high quality.

    (Ticket 15762)

    9.  Append Rings did not update the list of classified wireframes if any of them were changed. For example, if you unselected a void mesh, the append rings would still think it were there. (Ticket

    15449)

    Analyzer Issues

    1.  N/A

  • Aegis Help 19

    2016 iRing Inc.

    v0.17.057.0405 (2016-04-05)

    Aegis v0.17.057.0405 Release Date: 2016-04-05

    Interim Release

    Enhancements

    1.  Updates to various icons and controls 2.  Updated the Editable Table Report Item. (Ticket 15859) 3.  Updated the Wireframe Properties Window accessed from here.

    Issues

    Designer Issues

    1.  Changing the ring tolerance in the adjacent rings display options did not update the ring view until it was changed. (Ticket 15810)

    2.  The isosurface window had trouble displaying previously selected colors. Now the color is properly remembered and displayed (Ticket 15805)

    3.  Moving the holes with the ctrl key held down wasn't responding. (Ticket15811) 4.  More drilling parameters menu option in the hole layout table context menu didn't work. (Ticket 15820)

    5.  When using fixed pivots in the Create New Ringsets window some rings in some projects would not be generated even though using the Re-Drill Rings Window would work as expected.

    (Ticket 15871)

    6.  Slot Editor - An exception would occur if a hole diameter was a very small number when trying to create a new slot template. (Ticket 15877)

    7.  Slot - In some cases the slot would not be placed even though it should fit. This happened because Aegis was not able to capture the correct pivots because the drill mast was hitting the

    wall and the location of the reference line was too close to the wall. Now Aegis will draw the slot

    with the missing holes. It will allow the planner to move the slot to a better position manually.

    (Ticket 15891)

    Analyzer Issues

    1.  N/A

  • Aegis Help 20

    2016 iRing Inc.

    v0.17.055.0324 (2016-03-24)

    Aegis v0.17.055.0324 Release Date: 2016-03-24

    Interim Release

    Enhancements

    1.  More updated icons.

    Issues

    Designer Issues

    1.  The 3D view in the manual survey hole import was not docked properly and would not properly resize with the form. (Ticket 15757)

    2.  Ring View - Moving the holes by using the CTRL key didn't work in all cases. In these cases a stope limit wasn't set and wasn't needed. (Ticket 15811)

    Analyzer Issues

    1.  N/A

  • Aegis Help 21

    2016 iRing Inc.

    v0.17.054.0318 (2016-03-18)

    Aegis v0.17.054.0318 Release Date: 2016-03-18

    Interim Release

    Enhancements

    1.  Updated icons - Aegis is in the process of having the icons updated throughout the program. This will proceed over the course of a few versions.

    Issues

    Designer Issues

    1.  Some of the tables in the reports were not being drawn properly. The border was too large in some cases. (Ticket 15726)

    2.  The display survey group of buttons was not active if manual surveyed holes were imported. (Ticket 15750)

    3.  If an entire ring was surveyed, the un-lock option would be available when it shouldn't have been. (Ticket 15751)

    Analyzer Issues

    1.  N/A

  • Aegis Help 22

    2016 iRing Inc.

    v0.17.053.0311 (2016-03-11)

    Aegis v0.17.053.0311 Release Date: 2016-03-11

    Interim Release

    Enhancements

    1.  Add the ability to copy the 3D view to the clipboard. (Ticket 15693) 2.  Added the ability to export report tables to csv files. (Ticket 15488)

    Issues

    Designer Issues

    1. Reports - When pasting values in to the table editor, they would be duplicated. (Ticket 15670)

    2. A key missing exception could occur when attempting to merge two wireframes. (Ticket 15680)

    3. When loading a project, a duplicate key exception could be thrown. (Ticket 15706)

    Analyzer Issues

    1.  N/A

  • Aegis Help 23

    2016 iRing Inc.

    v0.17.051.0304 (2016-03-04)

    Aegis v0.17.051.0304 Release Date: 2016-03-04

    Interim Release

    Enhancements

    1.  Slot Editor - Updated slot editor to allow holes to be numbered. (Ticket 15315) 2.  Export options were added to the Scenario context menu. (Ticket 15487)

    Issues

    Designer Issues

    1.  If the user zoomed in too far the view port in the slot editor would get stuck. Limited it to a scale less than 1:500000. (Ticket 15630)

    2.  Timing module would throw an exception when editing a row in the timing grid where nothing could/should be done. (Ticket 15627)

    3.  In the timing module, some rings/ring sets/stopes that were part of a blast where not properly marked. (Ticket 15607)

    4.  IREDES export would crash if a ring contained an empty string for a name. 5.  Turning off the fixed pivot points in the re-drill window had no effect when the re-drill was opened again. (Ticket 15645)

    6.  Currency symbol in some parts of Aegis was not using the proper symbol from regional settings.

    7.  When a hole was deleted the other holes would not be renamed. 8.  If an exception occurred while creating new ringsets, the ring name would be set to an empty string. (Ticket 15644)

    Analyzer Issues

    1.  When attempting a best fit mesh to a field, if there were no ore contact wireframes classified an exception would occur. (Ticket 15610).

    2.  When a volume cannot be generated when doing a best field fit and exception occurred because no ore contact was set. (Ticket 15593)

  • Aegis Help 24

    2016 iRing Inc.

    v0.17.050.0224 (2016-02-24) - Fully Localized Release

    Aegis v0.17.050.0224 Release Date: 2016-02-24

    Enhancements

    1.  Reports - Ring View Report Item - Added various survey hole properties. (Ticket 14861)

    2.  Report Editor - Added the ability to interleave report pages. When applying a template if you have a series of "stacked" pages representing various parts of the

    reports it is possible to interleave all of the stacked pages. For example, if the first

    page in the represents the front page and the second page represents the back side of

    the same page it is not possible to print them in the correct order.

    3.  Block Model Legend - Once a block model legend was set there was no way to remove it from the list. Now a small 'x' button will appear beside it that can clear the

    selection. (Ticket 14893)

    4.  Stope Management - Added the ability to right-click on a stope in a scenario and merge it with another scenario. This is useful in when creating multiple stopes for the

    same scenario and some of them ended up in new scenarios. (Ticket 14881)

    5. Added a notification when attempting to create a blast indicating why it cannot be created

    because holes are not loaded or are not primed. (Ticket 14924)

    6. Added circles around the end of charges when being dragged. The sizes can be controlled from

    this window and the window can be accessed by hitting the F12 key. The values for the charge toe

    circle and charge collar circle will default to the loading delta. (Ticket 14972, 15528)

    7. Report Editor - Added the ability to paste the contents of the clipboard directly onto multiple

    report pages simultaneously. Very handy when labeling a large number of rings. (Ticket 14982)

    8. Reports - Text - Added rotation property.

    9. Symbols - Added two new symbols for gathering total drilled length for upholes and downholes

    for all the holes in all the rings of the active ringset. (Ticket 15132)

    a. ~ringset.lengthdrilled_upholes

    b. ~ringset.lengthdrilled_downholes

    10. Symbols - Added the ability to gather length totals by specify diameter using square brackets

    and the appropriate lengthdrilled symbol (Ticket 15249)

  • Aegis Help 25

    2016 iRing Inc.

    a. ~ringset.lengthdrilled[50] : Adding [50] to the end of the lengthdrilled symbol will cause

    it to return a total length summary from all the holes in all the rings that are 50mm in

    diameter.

    b. ~ringset.lengthdrilled_upholes[50] : Adding [50] to the end of the

    lengthdrilled_upholes symbol will cause it to return a total length summary from all the

    holes upholes in all the rings that are 50mm in diameter.

    c. ~ringset.lengthdrilled_downholes[50] : Adding [50] to the end of the

    lengthdrilled_downholes symbol will cause it to return a total length summary from all

    the holes downholes in all the rings that are 50mm in diameter.

    11. Export Ring Markers - Added ring look direction azimuth to the export file when exporting to

    Datamine .dm file format. (Ticket 15121)

    12. Reports - Slot Report Item - The slot item can now be oriented by an azimuth angle. (Ticket

    15164)

    13. Landing Page - You can now select multiple entries from the grid and delete them all at once.

    (Ticket 15175)

    14. Symbols - Added symbols that report on the total length drilled for all the ringsets in a

    scenario. (Ticket 15249)

    a. ~scenario.lengthdrilled[50] : Adding the [50] to the end of the lengthdrilled will cause it

    to return total for all holes that are 50mm in diameter.

    b. ~scenario.lengthdrilled_upholes : Report the total length drilled for all upholes.

    c. ~scenario.lengthdrilled_upholes[50] : Adding the [50] to the end of the

    lengthdrilled_upholes will cause it to return total for all upholes that are 50mm in

    diameter.

    d. ~scenario.lengthdrilled_downholes : Report the total length drilled for all downholes.

    e. ~scenario.lengthdrilled_downholes[50] : Adding the [50] to the end of the

    lengthdrilled_downholes will cause it to return total for all downholes that are 50mm in

    diameter.

    15. Symbols - Added symbols that report on total charge lengths for a blast. (Ticket 15249)

    a. ~blast.holecount : List the number of holes in a blast

    b. ~blast.lengthcharged : List the total length of all charges involved in a blast.

    c. ~blast.lengthcharged_upholes : List the total length of all charges in upholes involved

    in a blast.

    d. ~blast.lengthcharged_downholes : List the total length of all charges in downholes

    involved in a blast.

    e. ~blast.detonatorcount[20] : detonatorcount returns the total number of detonators in

    a blast. The option has been added to provide the total count by leg length ( as indicated

    by the leg length wrapped in the square brackets: [20]). NOTE: The leg lengths must be

    defined in the database for each detonator type. Only these values can be used. All other

    values will return a result of 0.0.

    16. Symbols - Added a symbol for the current date - ~currentdate

    17. Added the ability to export laser line markers based on the ring markers

  • Aegis Help 26

    2016 iRing Inc.

  • Aegis Help 27

    2016 iRing Inc.

    18. Added the ability to display rings from adjacent stopes. (Ticket 14436)

  • Aegis Help 28

    2016 iRing Inc.

    19. Reports - Hole Table - Added column RelativeHorizontalCollarOffset which reports the hole

    collar offset relative to the adjacent hole collar. The first hole collar is left empty. (Ticket

    15345)

  • Aegis Help 29

    2016 iRing Inc.

    20. Added the ability to flip the look direction of rings that have been modified without losing the

    changes. Can now also flip rings that are part of blasts or that have been surveyed. (Ticket

    15354)

    21. Reports - Plan View Report Item - Added the ability to change the scale of the look direction

    arrows in the Plan View Report Item. (Ticket 15313)

    22. Reports - Ring View Report Item - Added the ability to display the length of the hole overlaid

    on top of each hole in the Ring View Report Item. (Ticket 15314)

  • Aegis Help 30

    2016 iRing Inc.

    Issues

    Designer Issues

    1.  When extruding a stope outline a label was hiding the left edge of the up/down horizontal offset control.

    2.  Replaced the hint window in the 3D view as it could cause problems with some graphics cards. 3.  Reports - Ring View Report Item, Plan View Report Item and Long Section View Report Item - The line style was not updating the view automatically when changed. (Ticket 14858)

    4.  Reports - Ring View Report Item, Plan View Report Item and Long Section View Report Item - The "Line Style" in the property grid was reading Aegis.LineStyle2. (Ticket 14860)

    5.  3D View - the direction cube had the labels "Top" and "Bottom" in the wrong positions. 6.  Reports - In the scenario reports the plan view only displayed the active scenario and no other scenarios. (Ticket 14871)

    7.  Print preview output for a particular window with the print option doesn't match printed results. (Ticket 14880)

    8.  When you changed the reference line in the Create New Ring Set window, if you had a large offset from start or offset from end value set that was larger than the reference line and

    problem would occur. Now if you change the reference line these values are set to 0. (Ticket

    14892)

    9.  When creating new rings in Create New Ring Set window hitting any of the check boxes in the Pattern Parameters Tab would have no effect until the rings were finished generating at which

    point it would start over again. (Ticket 14893)

    10. When importing wireframes and setting the color in the grid you were not able to unselect a

    color.

    11. Stope Layout Table - Under some conditions the grid would not display some of the rings

    after they were created. (Ticket 14921)

    12. Stope Layout Table - Right-clicking on the selected row did not produce expected results.

    (Ticket 14930)

    13. Would receive an exception in the scenario reports if the hole diameter was not supported

    by the drill. (Ticket 14939)

    14. Fixed a cross-threaded exception when loading a report that contained an RTF formatted text

    item that also contained a symbol.

    15. When re-drilling, the active ring was not maintained. (Ticket 14944)

    16. Improved the locking mechanism around the surveyed holes. (Ticket 14379)

    17. Report Editor - On some computers the A3 paper size was unavailable. This was caused

    because changing printers didn't update the list of available pages sizes. (Ticket 14963)

    18. Create New Ring Set window - Pattern Parameters Tab - in some cases items would be

    disabled for no apparent reason.

    19. Report Editor - Copying an image from a report page and pasting it back into the report

    would result in the copy being placed in a different position when it should have been pasted in

    the same position.

    20. Repaired issues around certain file selection dialogs when no file name was entered.

    21. Report Editor - Ring View Report Item, Plan View Report Item and Long Section View Report

    Item - Wireframe style options where not working correctly. (Ticket 14994)

  • Aegis Help 31

    2016 iRing Inc.

    22. Updated the IREDES export checksum to HEX

    23. Fixed pivots is stored with the drill and this caused some problems with the hole listings grid.

    (Ticket 14969)

    24. If the user accidentally right-clicks while holding the left mouse button down while dragging a

    hole around in the ring view the ring view will crash. (Ticket 15036)

    25. If a drill was setup without any hole diameters an exception would attempting to add a slot.

    (Ticket 15037)

    26. Slot Pattern Editor window - The hole diameter dropdown had no indication that a user could

    enter a diameter size if it was unavailable in the dropdown list. Added a tooltip to the dropdown.

    (Ticket 15086)

    27. Import Wireframes - Select Wireframes Button - When selecting .dm files to import, if the

    user selects both the tr and pt file duplicates wireframes are imported. (Ticket 15101)

    28. In the timing module a ring would be timed if it contained a slot but no primers. (Ticket

    15117)

    29. Reports - When launching a report that contains a Ringset summary table item an exception

    could occur if a ring doesn't contain charged holes.

    30. Reports - Ringset hole table didn't totalize custom formula columns. (Ticket 15130)

    31. When you start a new project or create a new scenario that is empty, the lock button would

    be enabled and if you clicked it an exception would occur. (Ticket 15142)

    32. When you start a new project or create a new scenario that is empty, the new slot button

    was enabled and if you clicked it an exception would occur. (Ticket 15143)

    33. Report Editor - When selecting a number of report items on a page by dragging the selection

    rectangle around them hitting the ESC key would not unselect them. (Ticket 15154)

    34. An null reference exception could occur when laying out holes in the create new ring set

    window. (Ticket 15181)

    35. When creating new ring sets using the create new ring set window sometimes the rings

    would be created at very odd azimuths. It happened when the start azimuth was very close to

    360 degrees and the ending azimuth was very close to 0 (17 degrees). This was an issue in the

    way that the azimuth was calculated for the reference line segments. The azimuth is no calculate

    based on the position of the starting point and the ending point. Now the rings will be placed

    with the look direction facing the end point of the reference line. (Ticket 15188)

    36. Exporting holes or ring markers to Surpac .str files was not working correctly, the x and y

    coordinates were permuted. (Ticket 15209)

    37. Exporting holes or ring markers to Datamine .dm files did not have defaults set for COLOUR,

    LSTYLE and SYMBOL.

    38. While moving a ring in the plan view control, the selected ring was changing. (Ticket 15230)

    39. When a ring was selected in the plan view the corresponding ring in the stope summary table

    would be selected. However if the ring was not visible in the list, the grid would not scroll to it.

    (Ticket 15251)

    40. Opening incompatible projects (i.e. projects created with newer versions of Aegis) an

    exception would occur when using the open menu option. (Ticket 15254)

    41. When selecting multiple projects on the landing page the OK button would remain enabled.

    Now it is disabled.

    42. Slot View Report Item - the delay label font was being used to draw the hole labels.

  • Aegis Help 32

    2016 iRing Inc.

    43. Reports - Table items and text would expand slightly when viewed in print preview or

    printed. (Ticket 15247)

    44. In some situations Aegis would not drill all rings in a stope. The rings would have the issue

    "Could not find right wall above drift floor" (or it could be the left wall). (Ticket 15292)

    45. Reports - Ring Table - When adding columns that were charge related empty values would

    appear in the cells when they should have had entries.

    46. When adding a new hole to a ring sometimes the pivot would be incorrectly calculated.

    (Ticket 15321)

    47. Reports - Azimuth Display - The compass indicator was not displaying the correct azimuth.

    (Ticket 15359)

    48. When deleting multiple rings, if a ring had a checkbox that was not visible it was still

    selectable when it shouldn't have been.

    49. Stope Layout Grid - The context menu option, Move Rings, was not working. (Ticket 15373)

    50. After extruding a stope limit after displaying the ring section in the 3D view the working plane

    of the ring section would still be visible. (Ticket 14845)

    51. Reports - The thumbnail on the left hand side of the report editor for each page would be

    incorrect if a line item were present on the page. (Ticket 15372)

    52. With a charge selected in the hole table and if a hole rotation was changed in the ring view

    an exception would occur. (Ticket 15384)

    53. In the hole table, an exception could occur when editing certain values when on a slot ring.

    (Ticket 15390)

    54. In the 3D view, if a project was loaded that contained meshes that were invisible (hidden)

    part of the view could be hidden. (Ticket 15393)

    55. Reports - Closing a report template that is already saved with changes on it will prompt to

    save the template. In this situation a duplicate report would be created in the gallery. (Ticket

    15355)

    56. If a project was recovered after it had been some how corrupted it may be possible to have

    no drill set which would cause an exception in some areas. (Ticket 15407)

    57. Plan View and Long Section View - The context menu item, re-drill rings was not working as

    expected. (Ticket 15409)

    58. Plan View - The compass option was not being drawn in the correct location when the option

    "Left Center" or "Right Center" was chosen. The vertical center was not being calculated

    correctly. (Ticket 15418)

    59. Switching themes while light tables or adjacent rings were displayed caused the holes to

    hide. (Ticket 15448)

    60. Attempting to add a ring before another ring could sometimes cause the ring to be created

    off the reference line. This would cause a crash that would require Aegis to be restarted. (Ticket

    15451)

    61. The horizontal pivot offset column in the hole table did not work for slots. Now you are able

    to change the horizontal pivot offset by typing in the grid. (Ticket 15447)

    62. Switching to a different theme while the adjacent rings or light table options were displayed

    would cause them to hide. (Ticket 15448)

    63. Null reference exception would occur if you attempted to look at the survey hole file

    properties if you only imported surveyed hole lengths.

  • Aegis Help 33

    2016 iRing Inc.

    64. Setting a hole horizontally by the hole table sometimes would result in it changing to a

    different pivot. (Ticket 15457)

    65. Changing the classification of a wireframe didn't affect the ring generation process. (Ticket

    15449)

    66. Attempting to change a holes breakthrough status would change the charge collar if it were

    manually set. (Ticket 15469)

    67. Removing a void wireframe from the list of voids had no effect on ringsets/stopes that were

    existing. Holes were added and assumed the wireframe was still part of the voids list. Now if a

    wireframe is removed existing stopes will ignore it. (Ticket 15449)

    68. In some cases it was not possible to manually add a charge to a hole because of the way the

    loading algorithm determined the collar height. Now if a charge is manually added to the hole

    Aegis will ensure that one is placed. (Ticket 15478)

    69. In some cases when creating new ring sets/stopes ring generation would fail because the ring

    generator was not properly set. (Ticket 15491)

    70. When a report template was applied a null reference could occur because the ring set is was

    not set properly. (Ticket 15498)

    71. When an item was pasted into a report the scenario index wasn't properly set causing the

    report to display the wrong information. (Ticket 15514)

    72. When a ring set item was pasted into a report with a ring context the index wasn't being

    properly set. (Ticket 15524)

    73. The charge circles added to the charge when it is moved manually were taking the ring collar

    and toe spacing as a default. They will now take the loading delta as a default. (Ticket 15526)

    74. The manual override for collar and toe circles in the ring view would not persist any changes.

    (Ticket 15528)

    75. A null reference would occur when writing a slot pattern when there was no description set.

    (Ticket 15540)

    76. DXF files would not export properly if the locale used the comma as a decimal separator.

    (Ticket 15541)

    77. In the preview for renaming rings, setting the starting index didn't affect the preview. (Ticket

    15548)

    78. In some cases a ring would be generated with an hole that was in the list but not drawn. This

    would cause the hole naming routine to fail. (Ticket 15535)

    79. Exporting meshes to dxf would generate incorrect files. (Ticket 15541)

    80. The create new ring set form stored the custom drill angle settings (star angle, end angle)

    incorrectly.

    81. When a blast was deleted from the project tree, the active blast in the main ribbon bar was

    not updated. (Ticket 15592)

    82. Reports would crash when any symbols relied on blast.scenario. (Ticket 15584)

    83. When loading a project, in rare cases an exception would be reported that the t value was

    outside the bounds of 0 and 1 for a piecewise linear path. (Ticket 15600)

    Analyzer Issues

    1.  N/A

  • Aegis Help 34

    2016 iRing Inc.

    v0.16.034.1126 (2015-11-26)

    Aegis v0.16.034.1126 Release Date: 2015-11-26

    Enhancements

    1.  Hole collar and toe coordinates can now be written to .dm and .dxf files as points. (Ticket 14511)

    2.  Hole collar and toe coordinates can be written to .csv files as well as polylines in .dxf files and strings in .dm files.

    3.  IREDES Import - Aegis can now import IREDES quality reports generated by compliant drills and use that hole information in the Survey Module. (Ticket 12740)

    4. Aegis can now design rings in adjacent stopes based on rings from existing stopes within the

    same scenario. This allows a user to align rings to the same plane. It is accessed as a drop down

    menu from the create new ring set button. (Ticket 14507)

    5. When drilling holes and using a stope limit in some circumstances it is desirable to stop the

    drilling process if the holes would be drilled outside the stope limit. This new feature will stop the

    drilling process if any hole that is drilled has no intersection with the stope limit. If no stope limit is

    specified, this option is ignored.

    Issues

    Designer Issues

    1.  In some cases a null reference exception could occur while right-clicking on a stope in the project explorer tree. (Ticket 14493)

    2.  When transforming polylines a null reference exception could occur when using imperial units. (Ticket 14577)

    3.  When extruding a stope limit changing the reference line had no effect. (Ticket 14586) 4.  When deleting multiple rings at once an exception would occur if the active scenario or ring set were empty. (Ticket 14606)

    5.  The hole/ring layout table would display some of the slot data in the wrong column. (Ticket 14624)

    6.  Some re-calculation issues were fixed with the create new ring set window. In some cases, with a certain field selected, a re-calculation would occur if the user clicked on a different spot in

    the window even if nothing has changed.

    7.  When importing surveyed holes to a scenario that already has blasts defined the blasts are supposed to be deleted when the new surveyed scenario is created. The active blast was not

    being deleted. (Ticket 14627)

    8.  Wireframes stored in .dm files that had capitalized PT or TR in the file names would not be imported. Now the case of the file name is ignored.

    9.  Some .dm files with field columns that spanned multiple pages would not import into Aegis. These files are now able to be imported. (Ticket 14631)

  • Aegis Help 35

    2016 iRing Inc.

    10. In some cases when the users "My Documents" folder is located on a network share Aegis

    couldn't detect the existence of required files even though they were there. Improved detection

    and reporting have been added. Essentially, if the error occurs again Aegis will generate a richer

    exception report to assist us with diagnostics and correction. (Ticket 14630)

    11. When launching the surveyed holes window the grid would have duplicated columns. (Ticket

    14639)

    12.  In the create ring set window if Aegis is busy creating rings and the scenario is changed, the

    ring generation would restart leaving the partially completed ring set in place. Now the ring set is

    cleared out properly. (Ticket 14703)

    13. In the create ring set window changing the stope name has no effect until the ring set is

    regenerated by changing one of the other parameters. (Ticket 14708)

    14. In the create ring set window changing the scenario name causes the ring set to be

    regenerated. (Ticket 14710)

    15. Changing the visibility/transparency of the wireframes in the surveyed holes window had no

    effect on the 2D ring view.

    16. When importing surveyed holes using the manual method after pasting the values into the

    window, if you tried to delete the data out of cell using the delete key wouldn't work. (Ticket

    14720)

    17. The arrow keys were not functioning in the surveyed holes window grid. Now the arrow keys

    can be used to navigate through the grid.

    18. In the ring view item in the reports if a block model was available, the property to control the

    displayed attribute did not function. (Ticket 14721)

    19. Block model evaluation buttons were not available in the Spanish or Russian localization of

    Aegis. (Ticket 14750)

    20. Loading certain Report templates when a new, empty scenario is active causes the following

    exception: "Index was out of range. Must be non-negative and less than the size of the

    collection. Parameter name: index". (Ticket 14551)

    21. Certain blast icons are enabled directly after importing surveyed holes. (Ticket 14627)

    22. An exception could occur when the isosurface rings form is canceled. (Ticket 14553)

    23. There was an issue in when designing rings from adjacent stopes where Aegis was only

    checking for an intersection with the stope outline and not the reference line.

    24. In the IREDES import if the selected ring set was not set a null reference exception could

    occur.

    25. When you try to import surveyed ring data from a file into a ring set that has already been

    surveyed a warning message would appear. The message would disappear if you proceeded.

    (Ticket 14802)

    26. There were items on the surveyed holes import form that were being displayed when they

    shouldn't have been.

    27. When the color of a mesh is changed in the surveyed hole form an exception would occur.

    Analyzer Issues

    1.  In some cases when generating a field after clicking a different spot in the window the field would be regenerated even though no settings were changed. (Ticket 12040)

  • Aegis Help 36

    2016 iRing Inc.

    v0.15.029.1020 (2015-10-20)

    Aegis v0.15.029.1020 Release Date: 2015-10-20

    Enhancements

    1.  DXF Import - Aegis can now import wireframes that are stored as block references. It can also deal with polygon mesh wireframes that are represented by separate polygon strips that are

    adjacent to one another. Typically these would be generated by some cavity survey scans.

    2.  Slot holes - When the slot holes were not charged a gray outline was displayed instead of the holes in the ring view. Now they will be drawn and have the options to control the line style for

    holes that are not on the ring plane. (Ticket 14282)

    3.  Reports - Added the Reference Line Coordinates Table which displays the coordinates of the

  • Aegis Help 37

    2016 iRing Inc.

    current reference line. (Ticket 1265)

    4.  Reports - Added the Length by Diameter Summary Table which summaries the total hole length by diameter for the active stope. (Ticket 14427)

    5.  Drill Rig Outline - The drill rig outline that is displayed in the plan view is now centered about the selected hole in the Ring View/ Hole Layout View. (Ticket 14428)

    6.  Added the ability to adjust drilling parameters on a hole by hole basis. This includes: setting the hole as breakthrough or not, changing the individual hole diameter, ignoring the contact or

    extending the selected hole to breakthrough. (Ticket 14416)

    7.  Aegis is now localized to the following languages: a. English

    b. Russian (Русский)

    c. Spanish (Español)

  • Aegis Help 38

    2016 iRing Inc.

    Issues

    Designer Issues

    1. Reports - If an item was deleted from a report page and the item had extended options available in

    the ribbon sometimes the options would remain visible. By remaining visible it allowed the user to

    click on buttons with actions that were not valid and cause an error.

    2. Reports - Ring View, Plan View and Long Section View - The initial scale of the item was not being

    calculated correctly when the item is placed by initially dragging its size.

    3. When an exception occurs in the middle of saving a project, the project will become corrupted.

    A feature was added to attempt to recover as much of the project as possible automatically when

    the file is opened again. (Ticket 13998)

    4. When working with wireframes sometimes the wireframes are non-manifold (holes, internal

    structures, self-intersections, etc.) and any calculated volumes or tonnage estimates could be

    incorrect. Aegis will now display a warning indicating what the problem is and that the calculations

    are suspect. NOTE: Internal structures may have no effect on volume calculations. (Ticket 13835)

    5. The break cavity window would generate errors if there were no wireframes classified as voids

    in the project. (Ticket 13898)

    6. Deleting the break mesh from a blast did not remove the ore and host rock volumes. This lead to

    incorrect values being displayed in the blast properties. (Ticket 14043)

  • Aegis Help 39

    2016 iRing Inc.

    7. The blast buttons on the main ribbon where not behaving as expected. (Ticket 14048)

    8. In some cases the slot pattern wouldn't be drawn because one of the holes had an invalid pivot

    point. Now a message will be displayed in the ring view indicating why the slot was not drawn.

    (Ticket 14097)

    9. Aegis had trouble placing holes where two void wireframes where overlapping due to a poor

    union operation on the wireframes. Now Aegis will ignore a second void intersection if it is within a

    certain tolerance (less them 1m). (Ticket 14098)

  • Aegis Help 40

    2016 iRing Inc.

    10. Re-Drilling with fixed pivots and then turning the fixed pivots option off would not affect how

    the ring was drilled again. (Ticket 14099)

    11. Resizing windows with the 3D CAD view such as the block model evaluation or the survey holes

    windows, wasn't as smooth as it should be. (Ticket 14113)

    12. When a blast node is selected in the project explorer the blast wireframe would highlight and

    turn white. If you clicked another wireframe, the previous wireframe would remain highlighted in

    some cases. Now if you hit the ESC key all wireframes will return to the unselected states.

    13. The ring slicing plane was not in the correct position relative to the the ring location. It was

    noticeable on rings at the very end of stope limit blocks. It would look like rings were not being

    rendered correctly. (Ticket 14100)

    14. If you zoomed in or out too far in the Ring View, Plan View or Long Section View Aegis would

    lock up at some point and become unresponsive. (Ticket 14214)

    15. The numeric input boxes throughout Aegis used for accepting numeric input would accept the

    terms "Infinity" and "-Infinity" which clearly are not valid numbers that Aegis would be able to deal

    with.

    16. In the new project window, if you entered reserved characters (such as a colon : or \) in the

    project name field would cause unexpected results. Now these characters are rejected and the

    user is not able to enter them into the input fields.

    17. The close and merge wireframe buttons had no way to cancel the operations once they were

    started. Now, you can hit the ESC key or click on another button to end the operation. (Ticket

    13958)

    18. A null reference exception could occur if a break mesh was highlighted and then deleted.

    (Ticket 14155)

  • Aegis Help 41

    2016 iRing Inc.

    19. Reports - Adding a drill angle display report item caused a null reference exception when there

    was no active ring set or stope.

    20. If the user.settings file has become corrupted Aegis would crash on startup. Now Aegis will

    catch the issue and clean up the file to prevent future problems. (Ticket 14250)

    21. When using the block model evaluation it wasn't possible to delete the resulting wireframe

    that was attached to the ring. (Ticket 14242)

    22.  When creating a new slot pattern, if you clicked the save button and then clicked the ok

    button to exit the slot editor there would be duplicate templates in the drop down list. (Ticket

    14305)

    23. If Aegis was in the middle of displaying the ring section in the 3D view and you clicked on the

    new project main menu item, the ring slice in the 3D view would still be visible. (Ticket 14312)

    24. Using the view in 3D button on the Ring View/ Hole Layout View causes the 3D View to align

    itself with the ring and display the ring slice in 3D. If you clicked on the New Project option under

    the Aegis button the 3D view would remain in the ring section view. Now the operation will be

    canceled. (Ticket 14312)

    25. Extrude Stope Limit Window - The window had sliders to allow the user to move the rectangle

    outline around. The sliders were inaccurate and have been replaced with numeric controls that

    allow the user to enter numbers directly or to use the toggle to increment/decrement by one unit

    at a time. NOTE: Once the input field is selected a mouse scroll wheel may be used to

    increment/decrement the value faster. (Ticket 14335)

    26. Rounding errors would occur in the process of converting metric values to imperial values

    when the user was entering imperial data. Aegis would convert the input value from imperial to

    metric. Some of the conversion were subject to rounding errors if the process was repeated a few

    times for the same field. This resulted in incorrect values. Some of the conversion factors did not

    have a high enough precision specified. Some small errors in some of the other conversion factors

    were also detected. (Ticket 14336)

    27. The grid in the block model evaluation did not allow the user to copy/paste results from it. Now

    Results can be pasted into a spreadsheet.

    28. An exception could occur in the reports when using symbol evaluations in some cases. (Ticket

    14356)

    29. An exception could occur on some unit text boxes if the rounding was not properly set.

    30.  When deleting ring meshes that were generated from the block model evaluation an

    exception could occur. (Ticket 14373)

    31.  A drilling error could occur if the slot were moved into a position where it wasn't completely

    drillable. (Ticket 14383)

    32. The number of parent cells and child cells was incorrect in some cases after reading a .dm

    based block model file.

    33. When timing a blast a "no elements" exception could occur. (Ticket 14413)

    34. In the hole table it was not possible to change the hole length. (Ticket 14415)

    35. On the break cavity window the resolution was not stored and subsequently would be reset to

    1m whenever the form was displayed. (Ticket 14450)

    36. In the blasting reports, if a fragmentation graph was added to a page, the page's thumbnail

    would not reflect this. (Ticket 13900)

    37. Reports - Ring View Report Item - The charge scale property was not working as it should.

  • Aegis Help 42

    2016 iRing Inc.

    (Ticket 14447)

    38. Reports - Ring View Report Item - The Show Hole Collar Pivot Lines property was not working.

    (Ticket 14448)

    39. Reports - Diameter Table - Placing a diameter table onto a report page where the ring had

    diameters that the drill didn't support caused an exception. Now the table will show the diameter

    length pair but will be unable to add the additional cost metrics. (Ticket 14426)

    40. In some situations, aegis project files were being saved with additional "." in the file name.

    41. Reports - The ctrl + scroll wheel movement wasn't controlling the zoom level of the page, you

    had to use the slider to control the zoom level. (Ticket 14459)

    42. Reports - Ring View Report Item - The Show Hole Collar Pivot Lines property was not working

    for slot holes. (Ticket 14471)

    43. Reports - Graph items would cause an exception if the location property had any negative

    values. (Ticket 14453)

    44. Reports - Graph items would cause odd behaviors when the items were too small to display the

    graphs. (Ticket 14470)

    45. Ring View - When values where changed in redrill or when creating a new ringset/stope, the

    ring view would lose its center and return to a default position. (Ticket 14337)

    46. In some cases when using the light table and clicking on the last ring in the stope an invalid

    index exception could occur. (Ticket 14525)

    47. The drill placement boundary was not being displayed correctly, the shape didn't reflect the

    height of the drill. Related to this, in some cases the placement boundary would not extend far

    enough to the left or right when there clear was space to do so. There was a tolerance issue when

    calculating parallel line segments. (Ticket 14529)

  • Aegis Help 43

    2016 iRing Inc.

  • Aegis Help 44

    2016 iRing Inc.

    Analyzer Issues

    1. Generate Fields - An error would occur when retrieving cached values for the Holmberg-Persson

    constants. (Ticket 14034)

    2. When the user pressed the cancel button on the Wireframe Field window the old mesh was not

    restored. (Ticket 14052)

    3. A null reference exception would occur in the Comparison window when there were no void or

    ore wireframes classified. Now the error is clearer indicating what is missing. (Ticket 14054)

    4. Blast volumes were not recalculated when a new wireframe was created with the Wireframe

    Field window. (Ticket 14057)

    5. On the Wireframe Field window, the isosurface would be recalculated for no apparent reason.

    There was an issue with the text boxes not recognizing that a value hadn't changed. (Ticket 14279)

  • Aegis Help 45

    2016 iRing Inc.

    v0.12.026.0810 (2015-08-10)

    Aegis v0.12.026.0810 Release Date: 2015-08-10

    Enhancements

    1.  The color dialog for selecting different colors has been replaced. 2.  Added columns Pivot Height and Pivot Height Distance to the holes table.(13993)

    Issues

    Designer Issues

    1.  Corrected the tab ordering on the windows in the Survey Import Section. 2.  When drilling holes in some cases voids would be ignored. This was happening because a stope limit was defined without including an ore contact wireframe. (13936)

    3.  Added code to ensure that all dialogs were properly closed and removed from memory. 4.  When editing a slot template if no changes were made and the user clicked the ok button, the slot template would be removed from the list of available templates. (13983)

    5.  Attempting to position the drill zone manually was not working as expected. (13987) 6.  There was no context menu associated with the fixed pivot grid in the database. (13980) 7.  Attempting to save the project in a folder that the user doesn't have access too resulted in an exception. Now the user will be warned and they will have the opportunity to save to a different

    location. (14002)

    8.  In some situations it was not possible to place a slot on a ring. This was caused by a tolerance issue. The tolerance value has been relaxed somewhat. (14003)

    9.  Report Editor - If you deleted the ring view from the page, the pan button would remain active. If the user clicked this button and Index out of range exception would occur. (14008)

    10. Report Editor - If you deleted the ring view from the page, the set automatic scale and

    drawing scale slider would cause the same exception as the pan button. (14008)

    11. If a stope limit has been defined, you would receive an exception stating that the ring plane

    doesn't intersect the drilling volume if you attempted to place a ring outside the stope limit. This

    restriction has been removed to allow the user to place services holes. (14021)

    12. If a ring was drilled with fixed pivots, turning them off in the re-drill window would have no

    effect. (14022)

    13. If an item is deleted from a report editor page, the ribbon bar would not be notified and

    buttons or panels could be left active when the are not supposed to be.

    14. When an item was inserted into a report editor page its scale was not automatically

    calculated unless the item was resized.

    15. When an item was being resized in the Reports, its scale was not updated automatically

    when the item was being resized.

    Analyzer Issues

  • Aegis Help 46

    2016 iRing Inc.

    1.  The text of the scale control on the create field window was being cutoff. (13934).

  • Aegis Help 47

    2016 iRing Inc.

    v0.12.025.0722 (2015-07-22)

    Aegis v0.12.025.0722 Release Date: 2015-07-22

    Enhancements

    1.  Survey Holes Module - Aegis now has the ability to import survey holes from various formats. This module also includes the ability to lock the ring holes from being edited.

    2.  Fixed Pivots - Improvements have been made to the way the hole placement algorithm works. Added support for detecting when the mast hits the wall.

    Issues

    Designer Issues

    1.  Repaired a null reference bug that could sometimes occur in the 3D window. 2.  Repaired some theme issues where certain windows didn't display the proper colors. 3.  Pivot Interval line was not being drawn in the ring view. 4.  The offset line was not working as expected. 5.  Re-Prime - When multiple rings were selected it was supposed to make the text entry fields empty of all of the rings did not have the same value for that field.

    6.  Stope Table - When using metric, the diameter unit was displayed as "m" instead of "mm". (Ticket 13793)

    7.  Reports - When a table as added to the report page, the borders around it were correct. After saving and loading the report template the borders would be larger. (Ticket 13493)

    8.  Ring Summary Table - The drilling cost column was actually displaying the total cost value instead.

    9.  In some cases the IREDES export option failed to operate correctly. 10. Updated the hole sorting algorithm so that when the holes are labeled, but default they will

    be labeled left to right for both up holes and down holes.

    11.  When creating a new ring set or using the Re-Load window, selecting an explosive from the

    drop down wouldn't work the first time. (Ticket 13817)

    12. If a drill was using fixed pivots and the ring was regenerated using the Re-Drill window, the

    fixed pivots would not be assigned correctly to the ring generation algorithm.

    13. In the ring view, the charges were not being scaled correctly when the zoom was being

    adjusted. This yielded a check board pattern on the charges.

    14. An exception could occur when exporting all holes for a stope to the Datamine file format.

    (Ticket 13833)

    15. Hole Layout Table - the Horizontal Pivot Offset was not working as expected when using fixed

    pivots. (Ticket 13838)

    16. The fixed pivot grid in the drill database and the fixed pivot options window now properly

    respond to metric and imperial units.

    17. Hole Layout Table - If the rotation column was set to 0L or 0R (based on the rotation

    convention), the tilt field would display 0 or 180 respectively even though the holes were in the

  • Aegis Help 48

    2016 iRing Inc.

    ring plane and the ring was vertical. Now the tilt will match that of the ring if the holes are in

    plane. (Ticket 13846)

    18. When using the clear all menu option on the polylines folder an exception occurred. (Ticket

    13855)

    19. In some cases manipulating the 3D view (pan, zoom, rotate) could yield an exception because

    of a calculation tolerance that was too narrow. (Ticket 13856)

    20. Adding a new hole to a ring could cause an exception to occur. (Ticket 13885)

    21. In some cases holes were not editable in a ring.

    22. If you opened the break cavity window and clicked the OK button as soon as it became

    available an exception would occur.

    23. If you had an older version of Aegis installed (one prior to the Survey Holes Module) and you

    rearranged the columns in the Hole Layout Table, Aegis would crash when starting up and the

    table was visible. (Ticket 13902)

    24. When using Fixed Pivots and you attempted to change the pivot position of a hole manually,

    the drill mast and its grip point would be drawn at the wrong pivot while the hole was drawn

    from the correct pivot.

    25. Exporting a wireframe to .dm format would not use the file name specified.

    Analyzer Issues

    1. Advanced Isosurface - This window will now detect the different types of explosives loaded in the

    blast and allows the user to assign different isosurface values for each product type.

  • Aegis Help 49

    2016 iRing Inc.

    v0.11.021.0629 (2015-06-29)

    Aegis v0.11.021.0629 Release Date: 2015-06-29

    Enhancements

    1.  Reports - Symbols - Added new symbols for slot center line offset. Added ~ring.slotcenterlineoffset, ~ring.slotcenterlineoffsetlr and

    ~ring.slotcenterlineoffsetvertical. (Ticket 13492)

    2. When importing wireframes from DXF files the color information (if available) is extracted and

    applied to the wireframes on import.

    3. Reports - Symbols - Added new symbol for the slot. The symbol is slotlengthdrilled which

    represents the total length of holes drilled within the slot pattern. This can be used in conjunction

    with the formula evaluation to obtain total length drilled for all the holes on a ring. (Ticket 13726)

    4. Reports -Ring Table - The custom formula column was not being totalized when the "Show

    Totals" option was set to true. Now the column will now be totalized provided that the values are

    numbers. If any of the values are not numbers, those values are skipped.

    5. Reports -Ring Summary Table & Stope/Ring Set Summary Table - Added custom formula column

    similar to the one in the Ring Table. (Ticket 13736)

    6. Import Polylines/Lines - When importing lines or polylines you were restricted to one file at a

    time. This is lifted and now you can import from as many files as you wish at the same time.

    7. Fixed Pivots - Added the ability to force the drills to use fixed pivots located a certain distance

    from the reference line.

    Issues

    Designer Issues

    1. IREDES - Duplicate tags were being created in the xml file during the export process. This confused

    some drills.

    2. Attempting to delete a large number of wireframes or polylines from the project explorer would

    result in the user being prompted to delete each and every wireframe.

    3. Aegis would not install on computers that were set to languages other than english. This is

    corrected and the correct permissions and groups are properly assigned to the installation folder.

    4. The line representing the pivoting region in the ring view was not being drawn.

    5. Ring view - When right-clicking on the ring view, the context menu presented the option

    "Delete". This option would delete the entire ring from the project. It has been updated so that it

    now will read "Delete all Holes" and it will delete all of the holes on the ring instead of the entire

    ring.

    6. In some cases an exception would occur when applying a report template to a project. Code was

    added to make sure that the data structures were valid before attempting to use them. (Ticket

    13488)

    7. When importing wireframes from the DXF format Aegis attempts to automatically join

    wireframes together based on common edges. In the process it would rename the mesh to less

  • Aegis Help 50

    2016 iRing Inc.

    useful names. Now the wireframes will retain the file name and any layer name that may be

    attached to the wireframes.

    8. Drift Approximation - When no wireframes have been classified as voids an error message is

    displayed that is very ambiguous as to what the cause of the problem is. The error message will

    now indicate that there are no voids. (Ticket 13709)

    9. Reports - Slot View - The hole labels, delay labels and the sequence labels were not being drawn

    correctly. (Ticket 13732)

    10. Some items in the DBAdmin would trigger a "Save Changes" dialog to appear even if no

    changes were made. (Ticket 13737)

    11. In some cases dialog boxes prompting or warning the user about specific conditions would get

    stuck behind other windows rendering Aegis unusable. (Ticket 13738)

    12. When an exception occurs a dialog is presented to the user to send the information to the

    developers so that the exception can be rectified. During that process the user is prompted if they

    would like to save a copy of the project. This prompt has been eliminated and the backup project

    is automatically created.

    13. Reports -Ring Table - when using the pivot offset columns in the table, it was possible to move

    the ring in such a way that the reference line would not intersect the ring plane anymore. This

    would result in no values for those columns. Now Aegis will attempt to extend either end of the

    reference line in an attempt to look for an intersection. It will take the first and last segment and

    extend these in the respective line segment directions.

    14. Import Polylines/Lines - When importing the lines/polylines from DXF files, the file name wasn't

    assigned to the imported entities. Now the entities will be named after the file that contained it

    and it will also contain the layer name if that information is available.

    Analyzer Issues

    1.  N/A

  • Aegis Help 51

    2016 iRing Inc.

    v0.10.019.0526 (2015-05-26)

    Aegis v0.10.019.0526 Release Date: 2015-05-26

    Enhancements

    1.  N/A

    Issues

    Designer Issues

    1.  In special circumstances (computer was going to sleep) it was possible to receive an error when clicking on the OK button on the Create New Ring Set window. (Ticket 13411)

    2.  If you right-clicked on a wireframe in the project explorer and selected the delete option, the wireframe would be immediately deleted without presenting a confirmation dialog. A

    confirmation dialog was also not presented when deleting the polylines. Now a dialog will be

    presented.

    3.  In some environments Aegis would not be installed with the correct permissions to allow the user to execute the program. The installer has been corrected to ensure that the correct

    permissions are given when it is installed by an administrator. It was a simple matter for the

    Administrator to add the user(s) to the security of that folder and ensure the binaries in the

    Aegis folder had the correct permissions. The Warning would be:

    4.  During installation, Aegis would install the templates and sample databases to a single users "My Documents" folder. This is a problem when a computer is in a shared environment. Aegis

    will not copy the sample files to "C:\ProgramData\iRing Inc\Aegis\sample_data". When Aegis is

    launched it will ensure that the user has all of the required sample files by copying them from

    the shared folder to their personally "My Documents" folder when Aegis is launched.

    5.  On some systems Aegis would crash when launched by double-clicking an Aegis project file from windows explorer. (Ticket 13477)

    6.  Some surpac string files (.