Upload
duongkiet
View
215
Download
1
Embed Size (px)
Citation preview
P A T I E N T R O O M I L L U M I N A T I O N
C3 Lighting has incorporated their revolutionary remote power and control technology for LED lighting into a system that brings numerous attributes to the patient room. Our patient room light-ing is functional as well as enhances the patient experience. An Intelligent Power Distribution Module serves as the heart of the system and provides a portal for Microprocessor Controlled Lighting, creating a new dimension in programmable lighting. C3’s technology places the power supply for LED illumination in a central location and runs only low voltage DC power into the patient’s room. This decreases the size of fixtures, provides a safer environment, reduces the room’s heat load and decreases installation costs. Lighting can be controlled by a wall switch, a bedside remote, a personal electronic device such as an iPhone or Android, or from the nurse’s station computer.
Single or multiple fixtures provide general room illumination, high intensity lighting for reading, a focused exam/procedure light, amber night lighting, “Blue Light Therapy”, and programmable ?Dawn-to-Dusk illumination. Each of these capabilities adds to a patient’s comfort and conve-nience. It has been shown that “Blue Light Therapy” decreases levels of melatonin which can reduce depression. Amber night lighting serves as a light source for a patient to get out of bed or for the nurse to observe the patient. Unlike white light it does not reduce levels of melatonin, allow-ing a patient to more easily return to sleep. Programmable “Dawn-to-Dusk” lighting can regulate or stimulate a more natural circadian rhythm that is often difficult to maintain when patients are indoors for extended periods of time. A more natural circadian rhythm can reduce both hospital stay and levels of medication. The integrated exam/procedure light has the same technology found in C3’s External Field Surgical Light where both the level of illumination and the color of light output can be varied to increase visualization and help the physician focus on fine detail.
Cove Lighting can be included in C3’s Patient Room Lighting System, providing an attractive “wall washing” effect that can be programmed to dim and/or fade between selected colors, or simply cover the wall with tunable white or colored light. This adds an architectural lighting element to the room that serves to distract and relax the patient. Round down lights can also be added to highlight selected areas of the patient room. These fixtures also include the ability to be programmed with the same lighting effects as the main Patient Room Lighting. All C3 patient room fixtures are sealed (IP-66) and electroplated with an antimicrobial coating that suppresses the growth of bacteria, fungi, spores, and other contaminants.
P A T I E N T R O O M I L L U M I N A T I O N
C3’s Patient Room Lighting System eliminates the flickering seen with fluorescent lights and many of today’s LED lighting systems. This flicker is often not perceived by the patient or staff but leads to eye fatigue. C3’s lights are dimmed using a special high frequency pulse width modulation (PWM) technology that flashes the LEDs on and off at an extremely high rate which determines the effective light output, is imperceptible to the human eye and does not affect human biological systems. C3’s lighting not only reduces eye strain, but also provides a more comfortable light for reading and general room illumination. This technology is especially important when considering the amount of time that a patient spends in an artificially lit room, often with insufficient natural sunlight.
C3 Lighting’s Patient Room Illumination is designed to meet the needs of the physician and nursing staff while increasing a patient’s level of comfort and improving their hospital experience.
PATIENT ROOM ILLUMINATION SYSTEM FIXTURES
• Tunable-White Downlights• Tunable-White High Intensity Exam Light• Tunable-White Diffused Luminaire• Overhead Reading/Exam Light• Wall Mounted Visual Therapy Illuminator• Multi-Color Wall Wash Illuminator
PATIENT ROOM ILLUMINATION SYSTEM FEATURES
• Programmable “Dawn-To-Dusk” Illumination• Multi-Color Wall Washing Illumination• Tunable-White Light Fixtures• Tunable-White High Intensity Exam Lights• Antimicrobial Powder Coating (Minimizes Potential for Bacterial and Viral Growth)• No RF or EM Interference for Sensitive Equipment• Wireless or Wired Control• Driverless Fixtures Eliminate Heat From the Occupied Space• Sealed (IP66)• 80,000 Hour LEDs Reduce Maintenance for Lighting• Energy Savings of up to 85%• 24VDC “Inherently Safe” Power
SPECIFICATIONS
ORDERING INFORMATION
PROJECT NAME:
LOCATION:
TYPE: QUANTITY:
CATALOG NUMBER:
CERTIFICATION:
PAT IENT ROOM L IGHT ING
DIFFUSED LUMINAIRE
aedis
C3 has released a series of illumination products for the patient room that can be
controlled by staff and/or the patient. The products allow the environment of the
patient room to be customized at the touch of a button to meet the mood or needs
of the patient and staff.
Aedis Luminaires use the innovative ION™ Light Engine remotely driven by the
patented Helius™ Remote Power Distribution Module. These light panels are
remarkably thin and lightweight. Panels consume a minimum of 65% less energy
than T-8 fluorescent lamps. In addition, the unique Class 1 or Class 2 Power
Package reduces installation costs. Whether Hard Lid, T-bar or flange mount, our
Aedis Luminaires set new standards for the Health Care Industry.
HOUSING: Extruded Aluminum Sides and Aluminum Backplate. Flange units
are provided with ceiling trim.
LENS: 1/8” White Acrylic Lens.
ILLUMINATION: 2,000K, 3,000K, 3,500K, 4,200K, 5,000K, 6,000K,
Tunable-White, or Dawn-to-Dusk.
ELECTRICAL: Aluminum J-Box with current limiter provided for Class 1 power.
J-Box is optional for Class 2 power.
FINISH: Agion Antimicrobial White Powder Coat.
WARRANTY: Refer to www.c3lighting.com/warranty.html
SL 5 X0234
# OF LEDs
1 LED (*2929 lumens)
2 LEDs (*5858 lumens)
3 LEDs (*8787 lumens)
4 LEDs (*11716 lumens)
MOUNTING
00 Ceiling Grid T-bar
01 Integral FlangeSurface Mount
02 Integral FlangeFlush Mount
XXFINISH
WS
WA
C
Standard White
AntimicrobialWhite
Custom
XJ-BOX
1 Class 1 Power with current limiter
2 Class 2 Powerno j-box
3 Class 2 power with j-box
X--SIZE
006-048 (23.1- watts)
012-024 (23.1- watts)
012-048 (46.1- watts)
024-024 (46.1- watts)
024-048 (92.2- watts)
XXX XXX
(Contact factory for more size options)
- - - -X Standard
S Sealed
OPTIONS
XCOLOR TEMP
X
2 3,500K
2,000K0
3,000K1
4,200K3
5
Healthcare Tunable-White(3,000K-6,000K)
4 5,000K
7
6,000K
(*Based on 24”x24” �xture at 4200K)
Specifications subject to change without notice. Contact factory for custom configurations. All referenced company and product names are registered trademarks of their respective holders.
Does not include Helius Remote Power Distribution Module (required) or Controls (optional). See “Power Distribution and Controls” spec sheets
SPECIFICATIONS
ORDERING INFORMATION
PROJECT NAME:
LOCATION:
TYPE: QUANTITY:
CATALOG NUMBER:
CERTIFICATION:
CIRCADIAN FIXTURE
SL 5MOUNTING
00 Ceiling Grid T-bar
01 Integral FlangeSurface Mount
02 Integral FlangeFlush Mount
XXFINISH
WS Standard White
WA AntimicrobialWhite
C Custom
XJ-BOX
1 Class 1 Power with current limiter
2 Class 2 Powerno j-box
3 Class 2 power with j-box
XX Standard
S Sealed
OPTIONS
X--SIZE
006-048 (23.1- watts)
012-024 (23.1- watts)
012-048 (46.1- watts)
024-024 (46.1- watts)
024-048 (92.2- watts)
XXX - XXX
(Contact factory for more size options)
- - -COLOR TEMP
9Circadian/Dawn-to-Dusk
9
# OF LEDs
44
(*Based on 24”x24” �xture at 4200K)
4 LEDs (*11716 lumens)
C3 has released a series of illumination products for the patient room that can be
controlled by staff and/or the patient. The products allow the environment of the patient
room to be customized at the touch of a button to meet the mood or needs of the
patient and staff. C3’s “true” microprocessor controlled Dawn-to-Dusk technology
(590nm-amber to 16,000K extreme blue-white) combined with high intensity LED
exam lights, etc. create an industry first product that meets the requirements for the
“patient room of the future”.
Aedis Luminaires use the innovative IONTM
Light Engine remotely driven by the
patented Helius™ Remote Power Distribution Module. These light panels are
remarkably thin and lightweight. Panels consume a minimum of 65% less energy than
T-8 fluorescent lamps. In addition, the unique Class 1 or Class 2 Power Package
reduces installation costs. Whether Hard Lid, T-bar, or flange mount, our Aedis
Luminaires set new standards for the Health Care industry.
HOUSING: Extruded Aluminum Sides and Aluminum Backplate. Flange units
are provided with ceiling trim.
LENS: 1/8” White Acrylic Lens.
ILLUMINATION: Dawn-to-Dusk/Circadian Rhythm.
ELECTRICAL: Aluminum J-Box with current limiter provided for Class 1 power.
J-Box is optional for Class 2 power.
FINISH: Agion Antimicrobial White Powder Coat.
WARRANTY: Refer to www.c3lighting.com/warranty.html
PAT IENT ROOM L IGHT ING
aedis
Specifications subject to change without notice. Contact factory for custom configurations. All referenced company and product names are registered trademarks of their respective holders.
Does not include Helius Remote Power Distribution Module (required) or Controls (optional). See “Power Distribution and Controls” spec sheets
SPECIFICATIONS
ORDERING INFORMATION
PROJECT NAME:
LOCATION:
TYPE: QUANTITY:
CATALOG NUMBER:
CERTIFICATION:
SUSPENDED OVERBED FIXTURE
This product was designed specifically for Patient Room applications.
Available in downlighting only, uplighting only, or a combination of up
and down lighting. Both directions of illumination can be individually
controlled. Circadian (Dawn-to-Dusk) illumination and Tunable-White
lighting are available as options. A unique patent pending drop-in
frame provides easy installation in T-Bar acoustic ceilings. Agion
Antimicrobial Powder Coat finish and IP-66 sealed fixtures are just a
few of the features that position this product as the most advanced
illumination system for the Patient Room.
As with all C3 illuminators Remote Power Distribution and Control is a
standard feature, removing drivers from the fixture, allowing the
option of Class 2 wiring that usually does not require metal conduit
(check local code). When Class 2 is specified, this technology
eliminates the possibility of fire or electrocution related to the lighting
system.
FINISH
WA AntimicrobialWhite
C Custom
XROD/CABLE LENGTH
X --SIZE
----- XXX - XXX - - -SLMOUNTING
05
06
Pendant Mount RodPendant Mount Cable
XX X012-024
018-024
024-024
012-048
018-048
024-048
012-060
018-060
024-060
(Contact factory for more size options)
# OF LEDs
X
COLOR TEMP DOWNREADING
X
2 3,500K
NoneN
4,200K3
5 6,000K
5,000K4
COLOR TEMP DOWNAMBIENT
X
2 3,500K
2,000K0
NoneN
3,000K1
4,200K3
5 6,000K
5,000K4
6
Circadian/ Dawn-to-Dusk
9
Tunable-White
X
COLOR TEMP DOWNEXAM
Exam ApplicationPresets
E
NoneN
3,500K2
4,200K3
5,000K4
6,000K5
4,200K w/ Green Light Option
G3 3 (*8787 lumens)
1 (*2929 lumens)02 (*5858 lumens)2
4 (*11716 lumens)
*Lumens based on 1’ x 4’ �xture at 4200K
4
9DIFFUSION PANEL
XDi�usion PanelD
No Di�usion Panel(Customer Supplied)
N
J-BOX
1
XClass 1 Power with current limiter
2 Class 2 Powerno j-box
3 Class 2 power with j-box
24 24”
48 48”
72 72”
X
2 3,500K
2,000K0
NoneN
3,000K1
4,200K3
5 6,000K
5,000K4
RGBR
W RGBW
RGBAA
6
Circadian/Dawn-to-Dusk
9
Tunable-White
COLOR TEMP UP
HOUSING: Aluminum.
LENS: 1/8” White Acrylic.
LENS TRIM: Aluminum.
ILLUMINATION: RGB, RGBA, RGBW, 2,000K, 3,000K
3,500K, 4,200K, 5,000K, 6,000K, or Tunable-White.
ELECTRICAL: Current limiter provided for Class 1 power.
FINISH: Standard White or Custom color options available.
WARRANTY: Refer to www.c3lighting.com/warranty.html
PAT IENT ROOM L IGHT ING
aedis
Specifications subject to change without notice. Contact factory for custom configurations. All referenced company and product names are registered trademarks of their respective holders.
Does not include Helius Remote Power Distribution Module (required) or Controls (optional). See “Power Distribution and Controls” spec sheets
SPECIFICATIONS
ORDERING INFORMATION
PROJECT NAME:
LOCATION:
TYPE: QUANTITY:
CATALOG NUMBER:
CERTIFICATION:
OVER BED FIXTURE
C3 Lighting has developed a suspended LED Over Bed Fixture for the
“Patient Room of the Future”. Our unique design provides direct reading
and exam lighting, and indirect ambient and dawn-to-dusk illumination.
Indirect illumination is reflected off acoustical tile or our specular panel
inserts to avoid glare in the patient’s eyes. Our Remote Power and Control
Technology allows control from our membrane wall switches, pillow
speaker controls, iPhones and iPads. A patent pending mounting bracket
provides easy installation in both T-Bar and hard lids.
This is the only Over Bed Fixture that provides optimal light for the hospital
staff and physicians while providing safe indirect illumination for the
patient.
aedisPAT IENT ROOM L IGHT ING
HOUSING: Extruded Aluminum Sides and Aluminum Backplate. Flange units are provided with ceiling trim.LENS: 1/8” White Acrylic Lens. CIRCADIAN ILLUMINATION: Circadian/Dawn-to-Dusk - 590nm-amber to 16,000K (extreme blue-white)EXAM ILLUMINATION: Selectable - 3,000K, 4,200K, 5,000K, 6,500K, or 7,500K. ELECTRICAL: Aluminum J-Box with current limiter provided for Class 1 power. J-Box is optional for Class 2 power.FINISH: Agion Antimicrobial White Powder Coat.WARRANTY: Refer to www.c3lighting.com/warranty.html
FINISH
WA AntimicrobialWhite
C Custom
X --SIZE
------ XXX - XXX - -SL X012-024
018-024
024-024
012-048
018-048
024-048
012-060
018-060
024-060
(Contact factory for more size options)
# OF LEDs
X
COLOR TEMP DOWNREADING
X
2 3,500K
NoneN
4,200K3
5 6,000K
5,000K4
COLOR TEMP DOWNAMBIENT
X
2 3,500K
2,000K0
NoneN
3,000K1
4,200K3
5 6,000K
5,000K4
CIRCADIAN
XNoneN
Circadian/ Dawn-to-Dusk
9
X
COLOR TEMP DOWNEXAM
Exam ApplicationPresets
E
NoneN
3,500K2
4,200K3
5,000K4
6,000K5
4,200K w/ Green Light Option
G3 3 (*8787 lumens)
1 (*2929 lumens)02 (*5858 lumens)2
4 (*11716 lumens)
*Lumens based on 1’ x 4’ �xture at 4200K
4
9J-BOX
1
XClass 1 Power with current limiter
2 Class 2 Powerno j-box
3 Class 2 power with j-box
MOUNTING
00 Ceiling Grid T-bar
01 Integral FlangeSurface Mount
02 Integral FlangeFlush Mount
XX
Specifications subject to change without notice. Contact factory for custom configurations. All referenced company and product names are registered trademarks of their respective holders.
Does not include Helius Remote Power Distribution Module (required) or Controls (optional). See “Power Distribution and Controls” spec sheets
SPECIFICATIONS
ORDERING INFORMATION
PROJECT NAME:
LOCATION:
TYPE: QUANTITY:
CATALOG NUMBER:
CERTIFICATION:
BEHIND BED FIXTURE
SL 04MOUNTING
07 Wall Mount
7FINISH
WA AntimicrobialWhite
WAJ-BOX
1 Class 1 Power with current limiter
2 Class 2 Powerno j-box
3 Class 2 power with j-box
XX Standard
S Sealed
OPTIONS
X---SIZE
006-048 (23.1- watts)
012-048 (46.1- watts)
024-024 (46.1- watts)
024-048 (92.2- watts)
XXX XXX
(Contact factory for more size options)
- - - -COLOR TEMP
XCircadianC
Healthcare Tunable-White
T
aedisPAT IENT ROOM L IGHT ING
HOUSING: Extruded Aluminum Sides and Aluminum Backplate. Flange units are provided with ceiling trim.LENS: 1/8” White Acrylic Lens. CIRCADIAN ILLUMINATION: Circadian/Dawn-to-Dusk - 590nm-amber to 16,000K (extreme blue-white).EXAM ILLUMINATION: Selectable - 3,000K, 4,200K, 5,000K, 6,500K, or 7,500K. ELECTRICAL: Aluminum J-Box with current limiter provided for Class 1 power. J-Box is optional for Class 2 power.FINISH: Agion Antimicrobial White Powder Coat.WARRANTY: Refer to www.c3lighting.com/warranty.html
C3 Lighting’s Remote Power and Control Technology is at the
heart of a unique wall mounted fixture for the “Patient Room of
the Future”. When installed at the head of the bed it provides
bright LED illumination for reading and up-lighting to wash the
wall and ceiling above the patient with either ambient or
dawn-to-dusk illumination. Membrane wall switches, pillow
speaker controls, iPhones and iPads provides the patient
convenient control of their lighting.
Specifications subject to change without notice. Contact factory for custom configurations. All referenced company and product names are registered trademarks of their respective holders.
Does not include Helius Remote Power Distribution Module (required) or Controls (optional). See “Power Distribution and Controls” spec sheets
CERTIFICATION:
ORDERING INFORMATION
PENDING
PROJECT NAME:
LOCATION:
TYPE: QUANTITY:
CATALOG NUMBER:
SPECIFICATIONS
EXAM LIGHT
Exam ApplicationPresets
E
4FINISH
WS
WA
Standard White
Antimicrobial
C Custom
XJ-BOX
1 Class 1 Power with current limiter
2 Class 2 Powerno j-box
3 Class 2 power with j-box
X-SIZE
- XXX - XXX - -SLCOLOR TEMP
EX Standard
S Sealed
OPTIONS
- X006-048(92.16- watts)
006-096(184.32- watts)
MOUNTING
00 Ceiling Grid T-bar
01 Integral FlangeSurface Mount
02 Integral FlangeFlush Mount
XX# OF LEDs
44 LEDs (*11716 lumens)
4
(Contact factory for more size options)
PAT IENT ROOM L IGHT ING
aedis
C3 has released a series of illumination products for the patient room that
can be controlled by staff and/or the patient. The products allow the
environment of the patient room to be customized at the touch of a
button to meet the mood or needs of the patient and staff. C3’s “true”
microprocessor controlled Dawn-to-Dusk technology (590nm-amber to
16,000K extreme blue-white) combined with 4-color wall washing, high
intensity LED exam lights, etc. create a never before available system
that meets the requirements for the “patient room of the future”.
C3’s LED Exam Lights pack the power of a 12” X 48” exam light into a 6” X 48” package with features never before seen in an exam
light. Choose between five different color temperatures of light output with 100% - 0% dimming, asymmetric lens, antimicrobial powder
coated finish and the option of an IP-66 sealed fixture. Like all products from C3 they use the innovative IONTM
Light Engine remotely
driven by the patented Helius™ Remote Power Distribution Module. These fixtures are remarkably thin, lightweight and conserve a
minimum of 65% less energy than T-8 fluorescent lamps. Whether Hard Lid, T-bar or Flange mount our Aedis Luminaires set new
standards in healthcare lighting.
HOUSING: Extruded Aluminum Housing.
LENS: 1/8” White Asymetrical Acrylic Lens.
ILLUMINATION: Selectable - 3,000K, 4,200K, 5,000K, 6,500K,
or 7,500K.
ELECTRICAL: Aluminum for Class 1 power. J-Box is optional
for Class 2 power.
FINISH: Agion Antimicrobial White Powder Coat.
WARRANTY: Refer to www.c3lighting.com/warranty.html
(*Lumens based on 9” x 96”
�xture at 4200K)
Specifications subject to change without notice. Contact factory for custom configurations. All referenced company and product names are registered trademarks of their respective holders.
Does not include Helius Remote Power Distribution Module (required) or Controls (optional). See “Power Distribution and Controls” spec sheets
ORDERING INFORMATION
PROJECT NAME:
LOCATION:
TYPE: QUANTITY:
CATALOG NUMBER:
6” & 10” ROUND DOWNLIGHT
ORMOUNTING
01 Grid Ceiling
02 Gypsum Ceiling
XXFINISH
WS
WA
Standard White
AntimicrobialWhite
C Custom
XJ-BOX
1
X -Class 1 Power with current limiter
2 Class 2 Power
X Standard
S Sealed
OPTIONS
X-DIAMETER
XX - -COLOR TEMP
X
2 3,500K
2,000K0
3,000K1
4,200K3
5
Healthcare Tunable-White(3,000K-6,000K)
4 5,000K
7
6,000K
06 (10.8W)
10 (31.2W)
PAT IENT ROOM L IGHT ING
aedis
C3 has released a series of illumination products for the patient room that
can be controlled by staff and/or the patient. The products allow the
environment of the patient room to be customized at the touch of a button
to meet the mood or needs of the patient and staff.
Aedis Downlights use the innovative IONTM
Light Engine driven by the
patented Helius™ Remote Power Distribution Module. These products are
shallow, lightweight, have a remarkably even light distribution pattern and
consume 65% to 90% less energy than incandescent-based products.
They’re driven by centralized remote Class 1 or Class 2 power which
significantly reduces installation costs. RFI/EMI free, non-ferrous
construction eliminates mounting restrictions, making them ideal for
specialized applications in healthcare.
CERTIFICATION:
SPECIFICATIONS
HOUSING: Aluminum.
LENS: 1/8” White Acrylic.
LENS TRIM: Aluminum.
ILLUMINATION: 2,000K, 3,000K, 3,500K, 4,200K, 5,000K,
6,000K, or Tunable-White.
ELECTRICAL: Current limiter provided for Class 1 power.
FINISH: Agion Antimicrobial White Powder Coat.
WARRANTY: Refer to www.c3lighting.com/warranty.html
Specifications subject to change without notice. Contact factory for custom configurations. All referenced company and product names are registered trademarks of their respective holders.
Does not include Helius Remote Power Distribution Module (required) or Controls (optional). See “Power Distribution and Controls” spec sheets
CERTIFICATION:
PENDING
PROJECT NAME:
LOCATION:
TYPE: QUANTITY:
CATALOG NUMBER:
ORDERING INFORMATION
SPECIFICATIONS
PAT IENT ROOM L IGHT ING
aedis
C3 has released a series of illumination products for the patient room that can
be controlled by staff and/or the patient. The products allow the environment
of the patient room to be customized at the touch of a button to meet the
mood or needs of the patient and staff. Multiple panels can be combined to
create large graphic scenes.
Aedis graphic Illuminators are designed specifically to backlight images in
T-Bar or Hard-Lid ceilings. The unique housing is placed on top of graphic
panels and suspended on the T-bar grid. For certain applications, the
graphics can be installed and sealed in the illuminator’s housing. Like all
products from C3 Lighting, they use the innovative IONTM Light Engine. All
fixtures have an Agion Antimicrobial Powder Coat finish. The unique Class 1
or Class 2 Power Package reduces installation costs, these illuminators
consume a minimum of 65% less energy than similar illumination from T-8
fluorescent lamps.
HOUSING: Extruded Aluminum Sides and Aluminum Backplate.
LENS: 1/8” White Acrylic Lens.
ILLUMINATION: 4,200K or Tunable-White.
ELECTRICAL: Aluminum J-Box with current limiter provided for
Class 1 power. J-Box is optional for Class 2 power.
FINISH: Agion Antimicrobial White Powder Coat.
WARRANTY: Refer to www.c3lighting.com/warranty.html
OVERHEAD GRAPHIC ILLUMINATOR
2FINISH
WS Standard White
WA AntimicrobialWhite
C Custom
XJ-BOX
1 Class 1 Power with current limiter
2 Class 2 Power no j-box
3 Class 2 Power with j-box
XX Standard
S Sealed
OPTIONS
X-SIZE
XXX XXX- -- -SLCOLOR TEMP
X3 4,200K
7
GRAPHIC MOUNTING
X0 Inside
Frame
Outside Frame
1
024-024
024-048
CONFIGURATION
202 (46.1-watts)402 (92.2-watts)404 (184.4-watts)404a(184.4-watts)404b(184.4-watts)604 (276.5-watts)602 (92.2-watts)606 (414.8-watts)802 (184.4-watts)804 (368.7-watts)804a (368.7-watts)804b (368.7-watts)806 (553.0-watts)808 (737.3-watts)808a (737.3-watts)808b (737.3-watts)
XXX-
Healthcare Tunable-White(3,000K-6,000K)
(Contact factory for more size options)
(See last page for orientation options)
*ITEM# = GRAPHIC - XXXXXX
*Please visit www.c3lightingdev.com/aedis/aedisoverheadgraphic/ to choose graphic #
Specifications subject to change without notice. Contact factory for custom configurations. All referenced company and product names are registered trademarks of their respective holders.
Does not include Helius Remote Power Distribution Module (required) or Controls (optional). See “Power Distribution and Controls” spec sheets
CERTIFICATION:
SPECIFICATIONS
PAT IENT ROOM L IGHT ING
WALL MOUNTED GRAPHIC ILLUMINATOR
ORDERING INFORMATION
PROJECT NAME:
LOCATION:
TYPE: QUANTITY:
CATALOG NUMBER:
.
aedis
X Standard
S Sealed
- XSL 30 - 01B Satin Black
WS Standard White
WA Antimicrobial White
M Metallic Silver
C Custom
X1 Class 1 Power
with current limiter
2 Class 2 Power
X-024-024 (46.1- watts)
024-048 (92.2- watts)
036-036 (103.7- watts)
(184.4- watts)
(276.5- watts)
(414.8- watts)
(553.0- watts)
048-048
048-072
072-072
072-096
XXX - XXX - -X3 4,200K
7 Healthcare Tunable-White(3,000K-6,000K)
(Contact factory for more size options)
C3 has released a series of illumination products for the patient room that can be
controlled by staff and/or the patient. The products allow the environment of the
patient room to be customized at the touch of a button to meet the mood or needs
of the patient and staff. Multiple panels can be combined to create large graphic
scenes.
Aedis Wall Mounted Graphic Illuminators are designed specifically to optimize the
illumination of graphic images. Its unique side hinge enables easy graphics
change-out. The thin profile provides a contemporary look and meets ADA
standards. Like all products from C3 Lighting, our graphic illuminators use the
innovative ION™ Light Engine. The unique Class 1 or Class 2 Power Package
reduces installation costs. Available with Tunable-White illumination. In addition,
these graphic illuminators consume a minimum of 65% less energy than similar
illumination from T-8 fluorescent lamps. RFI/EMI free, non-ferrous construction
allows mounting in sensitive areas.
HOUSING: Extruded Aluminum Sides and Aluminum Backplate.LENS: 1/8” White Acrylic Lens and 1/8” Clear Acrylic Lens.ILLUMINATION: 4,200K or Tunable-White.FINISH: Agion Antimicrobial White Powder Coat. Custom colors also available.WARRANTY: Refer to www.c3lighting.com/warranty.html
FINISH J-BOX OPTIONSSIZECOLOR TEMP
Specifications subject to change without notice. Contact factory for custom configurations. All referenced company and product names are registered trademarks of their respective holders.
Does not include Helius Remote Power Distribution Module (required) or Controls (optional). See “Power Distribution and Controls” spec sheets
CERTIFICATION:
ORDERING INFORMATION
PENDING
PROJECT NAME:
LOCATION:
TYPE: QUANTITY:
CATALOG NUMBER:
SPECIFICATIONS
WALL WASH FIXTURE
2 3,500K
2,000K0
3,000K1
4,200K3
5 6,000K
5,000K4
RGBR
W RGBW
RGBAA
SL 7MOUNTING
00 Ceiling Grid T-bar
02 Integral FlangeFlush Mount
03 Cove MountRecessed
XXFINISH
WS Standard White
WA AntimicrobialWhite
C Custom
XJ-BOX
1
X -Class 1 Power with current limiter
2 Class 2 Powerno j-box
3 Class 2 power with j-box
X Standard
S Sealed
OPTIONS
X- - -COLOR TEMP
X
Healthcare Tunable-White(3,000K-6,000K)
7
# OF LEDs
X
3 3 (*8787 lumens)
1 (*2929 lumens)02 (*5858 lumens)2
4 (*11716 lumens)4
Circadian/Dawn-to-Dusk9
WIDTH LENGTH
XXX XXX-006-024
006-048
006-060
006-096
006-120
(Contact factory for more size options)
*Custom seamless lens options available. Consult with Factory.
(*Lumens based on 6” x 96” �xture at 4200K)
L Linear
C Corner
CONFIG
X- -
PAT IENT ROOM L IGHT ING
aedis
C3 has released a series of illumination products for the patient
room that can be controlled by staff and/or the patient. The products
allow the environment of the patient room to be customized at the
touch of a button to meet the mood or needs of the patient and staff.
C3’s “true” microprocessor controlled Dawn-to-Dusk technology
(590nm-amber to 16,000K extreme blue-white) combined with
4-color wall washing, etc. create an industry first product that meets
the requirements for the “patient room of the future”.
Aedis LED Wall Wash Fixtures are high power LED lights that are used for decorative lighting to highlight or wash walls of hospitals
with a full spectrum of colors. Available in a variety of sizes, Aedis Wall Wash Fixtures consist of an array of ION™ Solid-State Light
Engines mounted in specialized housings, pre-wired and configured to meet Class 1 or Class 2 electrical safety requirements.
These fixtures enable designers, architects, manufacturers, integrators and lighting professionals to create new applications for LED
illumination. The scope and diversity of uses for the Wall Wash Fixture, combined with their inherently safe low voltage design (when
specified Class 2), energy efficiency, eco-friendliness, shallow profile and perfectly even illumination make them ideal for integration
into healthcare lighting applications.
HOUSING: Extruded Aluminum Housing.
LENS: 1/8” White Acrylic Lens.
ILLUMINATION: RGB, RGBA, RGBW, 2,000K, 3,000K, 3,500K,
4,200K, 5,000K, 6,000K, Tunable-White, or Dawn-to-Dusk.
ELECTRICAL: Aluminum J-Box with current limiter provided for
Class 1 power. J-Box is optional for Class 2 power.
FINISH: Agion Antimicrobial White Powder Coat.
WARRANTY: Refer to www.c3lighting.com/warranty.html
Specifications subject to change without notice. Contact factory for custom configurations. All referenced company and product names are registered trademarks of their respective holders.
Does not include Helius Remote Power Distribution Module (required) or Controls (optional). See “Power Distribution and Controls” spec sheets