UserManual

RemoteSpeakerMicrophone(RSM)KyoceraPhonesPartNo.AT8429A

The AdvanceTec Remote Speaker Microphone (RSM) isdesigned for use with the Kyocera Push‐to‐Talk (PTT)enabled handsets providing amplified transmission andreceptionthroughtheremotespeaker/microphone. RevE/0412

4

2.When the internalbattery intheControlModuleisfullychargedtheLEDwillturnfromREDtoGREEN.ReplacingthebatteryintheControlModule1.IfafterfullychargingtheControlModule,theRSMwillnotkeeppowered throughout theday, the internalbattery intheControlModulemayneedtobereplaced.2.To replace the internalbattery, remove thebelt cliponthe ControlModule bypressingdown themetal clip leverunderthebeltclipandslidethebeltclipout.3. Remove the 2 silver screws holding the back of theControlModuleinplaceandremovetheback.4. Unplug the battery and replace with a new batteryavailablefromAdvanceTec(Part#AT8416A).WARNINGDonotreplacetheinternalbatteryintheControlModulewithanybatteryotherthanPart#AT8416AfromAdvanceTec.Anyother battery may cause harm to the Control Module’selectronicsandcouldbeafirehazard

1150NW163rdDrive,Miami,FL33169T:305‐623‐3939F305‐623‐3996

www.advancetec.com

Rev E /0412

2

The RSM Part # AT8429A includes:1.Part#AT8414A Speaker/Microphone2.Part#AT8419A ControlModule3.Part#AT8417A CoilCableOptionalExtrasPart#AT8416A ReplacementLi‐IonBatterySetupofRSM IMPORTANTPHONESETTINGS Thefollowingarephonesettingsthatareneededfor

withthe dvanceTec SM:operation A R

Settings DCSettings DirectConnect N1.Press> > > O

Settings DCSettings>Headset ode HeadsertsDCc ls.[DCbutton].

2.Press> > M > tttonsta albu

3.Press>Settings>Others>Accessibility>TTY>TTYOff.4.IncreaseorDecreasethevolumemustbedonewhilephoneisconnectedtotheRSMandisonanactivecall. 1.Plugthe2pinconnectorattheendofthecoilcordofthespeaker/microphone into the corresponding socketon thetopcorneroftheControlModule.

2PinConnector

2PinSocket

3

2. Clip the Speaker/Microphone onto the lapel or otherconvenientplaceontheusersclothing.3.CliptheControlModuleontotheuser’sbelt.4.ConnecttheControlModuletothehandsetusingthecoilcord supplied,via theaudio socketof thehandsetand thecorrespondingaudiosocketontheControlModule.OperatingtheRSM1.PressthePTTonthesideoftheSpeaker/Microphoneandspeaktowardsthespeaker/microphonetotransmit2. Release the PTT button of the speaker/microphone tolisten. The audio will be heard from thespeaker/microphone.ChargingtheControlModule1.TheControlModulehasaninternalrechargeableLithiumIonbatterywhich,likethephone,requiresregularcharging.2.Beforeusing for the first time, charge thebattery in theControlModulefor24hours.3.Usethepowersupply,suppliedwithyourphonetochargethe ControlModule. If the connector on the power supplysupplied with your phone is not a Micro USB, it will benecessary for you to purchase a conversion connector toconverttheconnectortoaMicroUSBconnector,orpurchasea power supplywith aMicro USB connector. This type ofconversion connector or power supply with Micro USBconnectorisreadilyavailablefromyourlocalphonesupplystore.LEDindicatoroftheControlModuleTheLEDindicatorontheControlModuleismulticolored.1. When the Control Module is connected to the powersupply and thepower supply isplugged into anPowerACoutlet,theLEDwilllightRED.