6,000 t/h stacking capacity, 4,500 t/h reclaiming capacity. Boom
length 60 m.
Bucket Wheel Stacker/Reclaimer for iron ore, coal, coke and
olivine.
EMO, Rotterdam, Netherlands
Bucket Wheel Stacker/ReclaimerIndustrial Solutions for the
mining and materials handling industry
Advanced technology and reliabilityin Europe’s largest terminal
for coal and iron ore
EMO, located at the entrance to Rotterdam’s seaport, is the
largest import and export terminal in Europe for dry bulk
materials, with an annual throughput of 60 million tons.In 2007 and
2012, Europe’s largest combined Bucket Wheel Stacker/Reclaimers,
which were designed, delivered and erected by thyssenkrupp
Industrial Solutions, were put into operation. In order to achieve
the requirement to operate the machine with coal and iron ore at
the same high capacity, the boom conveyor as well as the bucket
wheel, are equipped with variable speed drives.
Bucket Wheel Stacker/ReclaimerIndustrial Solutions for the
mining and materials handling industry
tkIS
EM
O S
R 00
32 e
11
2016
Technical Specification
General data
Design/Type: SR+IC+RT 6000/4500-1600x1800/60
Stacking capacity: 6,000 t/ h
Reclaiming capacity: 4,500 t/h
Boom length: 60 m
Handling material: Iron ore fines, iron ore pellets, coal, coke
and olivine
Material size: 0 - 120 mm
Bucket wheel type: Cell type
Cutting diameter 9,000 mm
Number of discharges: 23.9 - 47.4 /min
Number of buckets: 9
Rail Gauge: 12 m
Corner base: 12 m (3-point portal)
Belt width: 1,800 mm
Belt speed: 3 - 6 m/s
Stockpile cross section: Base width 78 m, height 24 m
Special design and features – meets high customer demands
The special designed bucket wheel is driven by a slow motion
hydraulic motor. By using variable conveyor and bucket wheel speeds
the machine is able to reclaim coal and iron ore at the same
capacity.
thyssenkrupp Industrial Solutions and EMO - a long successful
collaboration
Since the early 1970s thyssenkrupp Industrial Solutions
(previously PWH) designed and supplied the entire unloading,
loading and stockyard equipment for the EMO terminal. The three
world-wide largest grab unloaders are feeding seven Bucket Wheel
Stacker/Reclaimers during the stacking operation. These machines
are also transporting the reclaimed material to one of the barge
unloaders or to the wagon loading systems with the latter ones
being desi-gned, fabricated and installed by tkIS as well.
© 2016 Product specifications and prices are subject to change
without notice or obligation. The photographs and/or drawings in
this document are for illustration purposes only. The operation
values are considered to be approximate and will be finally
determined on the basis of the specific task and the material
characteristics. The only warranty applicable to our equipment is
the standard written warranty applicable to the particular product
and sale and thyssenkrupp makes no other warranty of accuracy,
reliability, completeness, merchantability or fitness for any
purpose, express or implied. Products and services listed may be
trademarks, service marks or trade-names of thyssenkrupp and/or its
subsidiaries in Germany and other countries. All rights are
reserved.
Contact Ernst-Heckel-Straße 1 D-66386 St. Ingbert-Rohrbach,
Germany Phone: +49 6894 599 0 E-mail: [email protected]
www.thyssenkrupp-industrial-solutions.com
thyssenkrupp Industrial Solutions AG
The compact designed slewing gear, which comprises of four
hydraulic drives, is assuring a smooth, uniform, safe slewing
operation and requires low maintenance.
The very high technical standard of the design and construction
has made it possible to equip the machine with unmanned control
system by means of 3D-scanner and GPS device, allowing for a fully
automatic operation from a remote control and monitoring station of
the plant.
Unmanned fully automatic operation
Specially designed bucket wheel
Reclaiming operation
