Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
Advanced Methods for Manufacturing
Alison HahnOffice of Nuclear Energy
U.S. Department of Energy
FY2017 Consolidated Solicitation Webinar
August 10, 2016
Vision• To improve the methods by which nuclear
equipment, components, and plants are manufactured, fabricated, and assembled by utilizing ‘state of the art’ methods derived from other high tech industries.
Goal• To reduce cost and schedule for new nuclear
plant construction• To make fabrication of nuclear power plant
(NPP) components faster, less expensive, and more reliable
AMM Vision and Goals
2
NEET-1 FOA Technical Focus Areas
1. Factory and Field Fabrication Techniques
2. Advances in Manufacturing Processes for components
3
Factory and Field Fabrication Techniques
4
Improvements in Fabrication Technologies
• Continue to improve on welding speed and quality in the fabrication environment
• Seeking new joining technologies for common applications
• Applying new surface modification (coating) techniques to make fabricated structures less susceptible to corrosion
• Improving the thru-put of shop floor and site operations
Advances in Manufacturing Processes for Components
5
Advances in component manufacturingprocesses
• Reactor internals, fuel cladding and fuel supportassemblies
• Vessels, pressure boundary components
• Replacements or improvements for conventional manufacturing processes
• Cladding or surface modification methods
Corrosionand wear resistant applicationsfor components
NSUF-1.2c FOA Technical Focus Area
1. Advanced and innovative manufacturing techniques for irradiation testing to demonstrate performance
6
Previously Awarded Projects
7
FY2011• Laser-Arc Hybrid Welding of Thick Section Ni-base Alloys: Penn State
University - Complete• Development of Seismic Isolation Systems using Periodic Materials: University
of Houston – Complete
FY2012• Monitoring and Control of the Hybrid Laser-GMAW Process: Idaho National
Laboratory - Complete• Innovative Manufacturing Process for Nuclear Power Plant Components via
Powder Metallurgy and Hot Isostatic Processing Methods: Electric Power Research Institute (EPRI) - Complete
• Laser Direct Manufacturing of Nuclear Power Components Using Radiation Tolerant Alloys: Lockheed Martin – Complete
• Modular Connection Technologies for SC Walls of SMRs: Purdue University -Complete
Previously Awarded Projects
8
FY2013• Ultra-High-Performance Concrete and Advanced Manufacturing Methods for
Modular Construction: University of Houston - Complete• Self-Consolidating Concrete Construction for Modular Units: Georgia
Institute of Technology - Complete
FY2014• Periodic Material based Seismic Isolators for SMR’s: University of Houston• Improvement of Design Codes to Account for Accident Thermal Effects on
Seismic Performance: Purdue University• Improving Weld Productivity and Quality by means of Intelligent Real-Time
Close-Looped Adaptive Welding Process Control through Integrated Optical Sensors: Oak Ridge National Laboratory
Previously Awarded Projects
9
FY2015• Environmental Cracking and Irradiation Resistant Stainless Steel by Additive
Manufacturing: GE Global Research• Advanced Onsite Fabrication of Continuous Large-Scale Structures: Idaho
National Laboratory• Advanced surface plasma nitriding for development of corrosion resistance and
accident tolerant fuel cladding: Texas A&M University • Prefabricated High-Strength Rebar Systems with High-Performance Concrete
for Accelerated Construction of Nuclear Concrete Structures: University of Notre Dame
Previously Awarded Projects
10
FY2016• Integrated Computational Materials Engineering (ICME) and In-situ Process
Monitoring for Rapid Qualification of Components Made by Laser-Based Powder Bed Additive Manufacturing (AM) Processes for Nuclear Structural and Pressure Boundary Applications Advanced Onsite Fabrication of Continuous Large-Scale Structures: Idaho National Laboratory: Electric Power Research Institute
• All-position surface cladding and modification by solid-state friction stir additive manufacturing (FSAM): Oak Ridge National Laboratory
• Irradiation Performance Testing of Specimens Produced by Commercially Available Additive Manufacturing Techniques: Colorado School of Mines
• Enhancing irradiation tolerance of steels via nanostructuring by innovative manufacturing techniques: Idaho State University
Summary of Expectations
11
The technologies developed will increase the reliability of nuclear power plants while decreasing the cost of fabrication and construction
The development of products and components will be able to gain acceptance by the appropriate regulatory or standard-setting bodies
Specific products should be capable of being deployed in commercial nuclear power plants
Contact Information
12
Federal Program Manager – Alison Hahn• [email protected]
Technical Lead – Jack Lance• [email protected]