Embed Size (px)
Citation preview
Advance Green Technologies, Inc.
CHANGING THE WORLD BY CHANGING THE WAY WE BURN COAL
TMT-13™
AGT has the ability to treat common types of coal being used in coal fired power plants in a way that
significantly reduces environmentally harmful emissions and dangerous toxic chemicals.
AND WE CAN DO IT NOW!
NO NEED FOR EXPENSIVE RETRO FITS OR CAPITAL COSTS
THE SOLUTION IS CALLED TMT-13™
TMT-13™ will reduce costs in power plants by allowing them to use less coal that will burn more completely.
In controlled combustion tests at WKU, TMT-13™ completely oxidized the coal’s carbon into CO2.
Less coal = savings in tonnage
In the same tests TMT-13™ also showed no nitrogen oxide emissions such as NO and NO2.
TMT-13™ appears to have interrupted the reaction that would otherwise produce NO and NO2.
THE SOLUTION IS CALLED TMT-13™
Clean fly ash becomes a marketable asset no longer a liability for power plants.
Power plants may use cheaper grades of coal without compromising combustion efficiency.
AGT’s TMT-13™ formula enables us to chemically manipulate the way inexpensive coal burns and gives it the ability to burn like the more expensive coal. This allows for tremendous savings for power plants regardless of the type coal being used. Less coal means less pollution being released into the atmosphere and generates the same or more kilowatts per ton with a remarkable reduction in toxins.
TESTED BY ONE OF THE FOREMOST AUTHORITIES IN COMBUSTION TECHNOLOGIES
WESTERN KENTUCKY UNIVERSITY’SInstitute for Combustion Science and Environmental Technology
ICSET
“It can be found that there was no CO produced during the combustion, carbon was completely transferred to CO2 in this reaction”.
The above statement means that the coal was completely burned and turned into CO2, a “green house gas”. We are reducing the carbon because we are reducing the amount of fuel and achieving the same output or more of generated power. This would show an economic savings (better burn = less coal costs + more power) to the power company.
TESTED BY ONE OF THE FOREMOST AUTHORITIES IN COMBUSTION TECHNOLOGIES
WESTERN KENTUCKY UNIVERSITY’SInstitute for Combustion Science and Environmental Technology
ICSET
“we focused on the emissions of CO, NO, NO2, SO2 and SO3, as well as the expected combustion product, CO2, during the coal combustion. It can be found that there was no CO produced during the combustion, carbon was completely oxidized to CO2 in this process. Furthermore, it helped to identify there is no emission of nitrogen oxide emissions, such as NO and NO2 …”
“TMT-13™ HAS INTURRUPTED THE REACTION THAT PRODUCES NO AND NO2”
The complete burn allows a power plant to use less coal to produce the same or more power allowing significant savings in coal costs and down time for cleaning equipment.
ADVANCE GREEN TECHNOLOGIES, INC.
Mike Barbee352-279-1844 cell352-797-2844 fax352-797-2842 [email protected]
Tony Marra352-650-0816 cell352-509-9062 fax352-797-2842 [email protected]
2 North Broad St. Brooksville, Florida 34601
advancegreentechnologies.org
