Upload
lamhanh
View
216
Download
3
Embed Size (px)
Citation preview
1
INSTITUTE FOR ENGINEERING OF POLYMER MATERIALS AND DYES
PAINT & PLASTICS DEPARTMENT IN GLIWICE, POLAND
invites for the 12th
International Scientific-Technical Conference
AADDVVAANNCCEESS IINN CCOOAATTIINNGGSS TTEECCHHNNOOLLOOGGYY
DATE: 8 – 10 November 2016
VENUE: EXPO SILESIA Exhibition Centre
41-219 Sosnowiec, ul. Braci Mieroszewskich 124, Poland
The Conference will be held in Conference Hall No 1 (at the ground-floor)
MAIN TOPICS OF THE CONFERENCE:
Raw Materials Evolutions:
– Polymers, resins and binders for coatings
– Novel pigments and fillers, tinting systems
– New generation of additives, agents and modifiers for coatings
Advanced Technologies and their Environmental Aspects:
– Waterborne
– Powder
– Nanotechnologies
– Functional Coatings
– Rad Curing
Applications
– Anticorrosive coatings
– Architectural coatings
– Automotive coatings
– Wood coatings
Machines and Equipment
Ecology and Legislation Aspects
Testing and Measurements
Relevant Research Projects
PROGRAMME (Programme may be subject to change if necessary):
Monday, 7 November 2016
1600
- 1900
Registration
Tuesday, 8 November 2016, 800
– 1800
800
- Registration
900
- Opening of Conference 9
20 - 11
00 Session I – Papers: 1, 2, 3, 4, 5
1100
- 1115
Coffee / Tea 11
15 - 12
55 Session II – Papers: 6, 7, 8, 9, 10
1255
- 1415
Lunch
2
1415
- 1555
Session III – Papers: 11, 12, 13, 14, 15
1555
- 1610
Coffee / Tea
1610
- 1800
Session IV – Papers: 16, 17, 18, 19, 20
Wednesday, 9 November 2016, 900
– 1800
900
- 1040
Session V – Papers: 21, 22, 23, 24, 25 10
40 - 10
55 Coffee / Tea
1055
- 1235
Session VI – Papers: 26, 27, 28, 29, 30 12
35 - 13
55 Lunch
1355
- 1535
Session VII – Papers: 31, 32, 33, 34, 35 15
35 - 16
10 Coffee / Tea – POSTER SESSION
1610 - 18
00 Session VIII – Papers: 36, 37, 38, 39, 40
1930
Joint Dinner at ―NEMO – Wodny Świat‖ (1, Aleja Róż,
41-300 Dąbrowa Górnicza) – 10 min walking distance from conf. venue
Thursday, 10 November 2016, 900
– 1740
900
- 1040
Session IX – Papers: 42, 42, 43, 44, 45 10
40 - 10
55 Coffee / Tea
1055
- 1235
Session X – Papers: 46, 47, 48, 49, 50 12
35 - 13
55 Lunch
1355
- 1535
Session XI – Papers: 51, 52, 53, 54, 55 15
35 - 15
50 Coffee / Tea
1550
- 1740
Session XII – Papers: 56, 57, 58, 59, 60
Close of Conference
NOTE: Titles of Papers according to mentioned numbers are presented on the next pages.
Posters will be presented in front of the Conference Hall.
LIST OF PAPERS (in presentation order):
MATERIALS FOR COATINGS:
— POLYMERS, BINDERS & RESINS
1 M. Aguirre, S. Chimenti, J. M. Vega, M. Paulis, J.R. Leiza: POLYMAT, University of
the Basque Country UPV/EHU, Spain
Seeded Semibatch (Mini)Emulsion Polymerization Process for the Synthesis of Hybrid
Coatings: From UV Protective to Anticorrosive Coatings
Proces szczepionej półperiodycznej polimeryzacji (mini)emulsyjnej dla otrzymania
hybrydowych wyrobów lakierowych począwszy od odpornych na UV do antykorozyjnych
2 U. Kubillus: Allnex Germany GmbH, Germany
Development of Novel HAA Resins with Improved Moisture Resistance for Industrial
and Architectural Powder Coatings
Opracowanie nowych żywic HAA dla farb proszkowych przemysłowych oraz dla
budownictwa o zwiększonej odporności na wilgoć
3 G. Lundsten: CH-Polymers Oy, Finland
A Binder Meeting the Proposed New Eco Label Requirements for Indoor Paints
Spoiwo spełniające wymagania nowej proponowanej ekologicznej etykiety dla farb do
malowania wnętrz
3
4 H. Kuczyńska, A. Ślusarczyk, M. Moreno*, M.J. Barandiaran*: Institute for
Engineering of Polymer Materials and Dyes, Paint and Plastics Department, Poland;
*POLYMAT, University of the Basque Country UPV/EHU, Spain
Air Drying, Decorative Paints, Formulated with Bio-based Polymers as Binders
Biopolimery, jako spoiwa w wodorozcieńczalnych dekoracyjnych farbach schnących na
powietrzu
5 C. Tunice, T. Trombetta, M. Beggiora: N. Benasedo SpA, Italy
New Hydroxylated Polyester Based on Renewable Sourced Monomers and Solvents
Nowy hydroksylowany poliester oparty na monomerach i rozpuszczalnikach ze źródeł
odnawialnych
— PIGMENTS & TINTING SYSTEMS
6 F.J. Maile, J. Filip*: Schlenk Metallic Pigments GmbH, Germany; *Institute of Information
Theory and Automation of the Czech Academy of Sciences, Czech Republic
New Applications for Polychromatic Effect Pigments
Nowe zastosowania pigmentów z efektem polichromatycznym
7 M.M. Ryan Jr.: The Shepherd Color Co., USA
Ultra-High Performance Inorganic Pigments: IR Reflectivity
Pigmenty nieorganiczne o bardzo wysokich parametrach eksploatacyjnych: Współczynnik
odbicia promieniowania IR
8 A. Gonchar, V. Troshchylo: RD Titan Group, TOV, Ukraine
Next Generation of TiO2 Pigments. Project RC-8828: Titanium Dioxide Grade with
Superior+ Durability, High Hiding Power, Excellent Dispersibility and High Initial
Gloss
Nowa generacja pigmentów TiO2. Projekt RC-8828: Gatunek dwutlenku tytanu o dużej
trwałości, wysokiej sile krycia, doskonałej dyspergowalności oraz wysokim połysku
początkowym
9 G. van Zijl, J. Wolters: Chromaflo Technologies Europe BV, The Netherlands
Designing Tinting System Concepts for Industrial Waterbased Coatings
Projektowanie systemów barwienia przemysłowych wodnych wyrobów lakierowych
— FILLERS
10 T. Herbrechter, R. Lemke*, M. Klawa*, D. Kruber*: DASLack GmbH, Germany;
*Quarzwerke GmbH, Germany
(Presented by: D. Burniak, KiZPPS Osiecznica Sp. z o.o., Poland/ Quarzwerke Group)
Small Fillers – Big Impact!
New Solutions for Coatings with High Performance Fillers
Nowe rozwiązania dla wyrobów lakierowych przy użyciu napełniaczy o wysokich
parametrach eksploatacyjnych
11 P. Greenwood: Akzo Nobel Pulp and Performance Chemicals AB, Sweden
Modified Colloidal Silica in Silicate Paints
Modyfikowana krzemionka koloidalna w farbach krzemianowych
12 V. Kilpeläinen, S. van Loon*: Mondo Minerals BV Branch Finland, Finland; *VLCI – Van
Loon Chemical Innovations BV, The Netherlands
Improvement of Surface Resistance of Coatings by Talc
Poprawa odporności powłok wyrobów lakierowych przy użyciu talku
4
13 S.J. Brigham, C. Watkinson: Glassflake Ltd., United Kingdom
(Presented by: V. Mirko: Glassflake Ltd., United Kingdom)
Understanding and Use of Glass Flake
Zagadnienie stosowania płatków szklanych
— ADDITIVES & MODIFIERS
14 R. Ravichandran, J. Florio, E. Beketow: King Industries, Germany
Novel Tin-free Catalysts for Polyurethane and Siloxane Systems
Nowe, niezawierające cyny katalizatory do układów poliuretanowych i siloksanowych
15 M. Loch, R. Friedrich: Merck KGaA, Germany
Take up the Daily Challenge
Podjęcie codziennego wyzwania
16 E. Tejada, C. Irle*, G. Behnken*, S. Tasic**: Covestro S.L., Spain; *Covestro
Deutschland AG, Germany; **MS Global AG - A Covestro Company, Serbia
New Innovative High-Performance Hardeners from Covestro: Efficiency,
Sustainability and more
Innowacyjne utwardzacze firmy Covestro o wysokich parametrach eksploatacyjnych:
wydajne, przyjazne środowisku itp.
17 Ł. Toma: PCC Exol SA, Poland
Influence of Selection of Surfactant System on Application Properties of Polymeric
Dispersions
Wpływ doboru układu surfaktantów na właściwości aplikacyjne dyspersji polimerowych
18 P. Storme: DOW Belgium BVBA, Dow Coating Materials, Belgium
Rheology Modifiers for Efficient Control of High Shear Viscosity in Water Based
Coatings
Reologiczne środki modyfikujące dla skutecznej kontroli wysokiej lepkości ścinania w
wodnych wyrobach lakierowych
ADVANCED TECHNOLOGIES
19 S. Krishnaswamy: Cranfield University, United Kingdom
Experimentation & Validation of Novel Thermal Coating Systems for Carbon/Epoxy
Composite Substrates
Doświadczenia i uzasadnienie stosowania nowych systemów powłokowych odpornych na
temperaturę do węglowo-epoksydowych podłoży kompozytowych
20 J.A. Quill: Q-Lab Corporation, USA
Weathering 101: The Right Choice
Natural and Accelerated Weathering Test Methods Compared
Starzenie w warunkach atmosferycznych 101: właściwy wybór
Porównanie metod badań odporności na wpływy atmosferyczne w warunkach naturalnego i
przyspieszonego starzenia
21 G. Döring, S. Pulbere, T. Frey: BASF SE, Germany
Paint it Cool!
Zimne powłoki
22 A. Valet, K. Roschmann*, J. Breu**: BASF Schweiz AG, Switzerland; *BASF SE,
Germany; **University of Bayreuth/Inorganic Chemistry I, Germany
Functional Coatings – a New Approach for Improved Barrier Properties
Powłoki funkcjonalne – nowe podejście dla poprawy właściwości barierowych
5
23 J. Kirchner, F. Hermes, O. Peters: Evonik Resource Efficiency GmbH, Germany
(Presented by: M. Vogel, Evonik Resource Efficiency GmbH, Germany)
Glossy Coatings with Good Water Transmission Made Possible by New Co-binder
Technology
Możliwość otrzymania powłok z połyskiem o dobrej przepuszczalności pary wodnej dzięki
nowej technologii współdziałającego spoiwa
24 C. Gabriel, M. Wanner*, H. Wetzel, S. Radosta, W. Vorwerg: Fraunhofer Institute for
Applied Polymer Research IAP, Germany; *Fraunhofer Institute for Manufacturing
Engineering and Automation IPA, Germany
Modified Starch Dispersions as Water-based Binder System for Paints and Varnishes
Dyspersje oparte na modyfikowanej skrobi jako układ spoiw wodnych do farb i lakierów
25 M. Kanouni: Clariant International Ltd., Switzerland
Waterborne Coatings: Improving the Weathering Resistance, Touch Feel and Scratch
Resistance
Wodne wyroby lakierowe o poprawionej odporności na warunki atmosferyczne, miękkim
dotyku oraz odporności na zarysowania
26 D. Shuliakova*, V. Miloslavskaya*, E. Indeikin*,**: *YarLI, Russia; **Yaroslavl State
Technical University, Russia
Polyisocyanate Combination as a Way to Improve Coating Performance
Poprawa parametrów eksploatacyjnych wyrobów lakierowych na drodze łączenia
poliizocyjanianów
27 X. Drujon: Sartomer Europe, France
Recent Developments in UV/EB Curable Coatings for Automotive Applications
Ostatnie osiągnięcia w wyrobach lakierowych utwardzanych promieniowaniem UV/EB do
zastosowania w przemyśle samochodowym
28 D. Skinner: Heraeus Noblelight Ltd, United Kingdom
UV LED Lamp Systems: Optimizing Wavelength, Power and Formulations for
Improved Cure Performance
Systemy lamp UV LED: optymalizacja długości fali, mocy oraz receptur wyrobów
lakierowych w celu poprawy parametrów eksploatacyjnych utwardzanych powierzchni
29 B. Strehmel, C. Schmitz, T. Brömme: Niederrhein University of Applied Sciences,
Germany
Near Infrared LEDs and Diode Lasers for Manufacture of New Materials and
Coatings with high Performance by Photopolymerization
Diody emitujące światło (LED) bliskiej podczerwieni oraz lasery diodowe do wytwarzania w
wyniku fotopolimeracji nowych materiałów i wyrobów lakierowych o wysokich parametrach
eksploatacyjnych
30 M. Bielmann, E. Callini: ebeam Technologies, COMET Group, Switzerland
Ultracompact Electron Beam Units – A Crucial Ingredient for Digital Printing and
Coating Applications
Ultrakompaktowe zespoły do utwardzania strumieniem elektronów – decydujący składnik
dla drukowania cyfrowego oraz zastosowań do powłok
31 K.M. Biller: Powder Coating Research Group, USA
The Next Revolution in Powder Coatings: Conquering Plastic Substrates
Kolejna rewolucja w farbach proszkowych w zastosowaniu na podłoża tworzywowe
6
32 H. Hintze-Bruening, D. Schmelter: BASF Coatings Division, Germany
Colloidal Graphene Oxide Processing for Organic Protective Coatings
Obróbka koloidalnego tlenku grafenu dla organicznych powłok ochronnych
33 K. Sütterlin, A. Zumsteg, J. Glaubitz: RD-Microbiology, Omya International AG,
Switzerland
Omyasmart®
Biocide Enhancement –
Advanced Technologies for Paints, Coatings, Adhesives & Sealants
Poprawa w zakresie środków biobójczych przy zastosowaniu Omyasmart®
–
Zaawansowane technologie dla farb, powłok, klejów i szczeliw
APPLICATIONS
34 X.X. Duan*,**, T. Parris**, A. Kazlauciunas*, J. Guthrie*: *University of Leeds, Scholl
of Chemistry, Department of Colour Science, United Kingdom; **Austin Hayes Ltd., United
Kingdom
Characterisation of the Impact from Solvent Retention in Anti-corrosion Subsea
Coatings for Multi-layer Coating Application
Charakterystyka wpływu zatrzymania rozpuszczalnika w antykorozyjnych eksploatowanych
pod wodą wielowarstwowych powłokach lakierowych
35 M. Wanner, K. Krawczyk: Fraunhofer- Institut für Produktionstechnik und
Automatisierung IPA, Germany
Criteria and Guidelines for Evaluation and Selection of Anticorrosive Paint Systems
for Steel Structures
Kryteria oraz wskazówki dla oceny i wyboru systemów farb antykorozyjnych do
zabezpieczania konstrukcji stalowych
36 M. Smit: LKAB Minerals, The Netherlands
Improving Corrosion Protection through Mica
Analyzing the Anti-corrosive Effect of high Aspect Ratio Mica in 2K Epoxy Coatings
Poprawa ochrony przed korozją poprzez zastosowanie miki
Analiza działania antykorozyjnego przy wysokim udziale miki w dwuskładnikowych
epoksydowych wyrobach lakierowych
37 L.E. Tsygankova, V.I. Vigdorovich*, N.V. Shel**, P.N. Bernatsky: Derzhavin State
University, Tambov, Russia; *All-Russian Research Institute of Use of Machinery and Oil
Products,Tambov, Russia; **Tambov State Technical University, Russia
Inhibited Oil Coatings for Anticorrosion Protection of Carbon Steel in Atmosphere
Containing SO2
Inhibitujące powłoki olejowe dla zabezpieczenia przeciw korozji stali węglowej w
atmosferze zawierającej SO2
38 S. Wilk, B. Żydek, J. Rachwol: Rowis-System Spółka Jawna M. Siemiński i St. Wilk,
Poland
Modification of Application Properties of Dispersion Paints and Plasters by Using
Open Time Extenders Based on Wax Dispersions. Laboratory Tests Methods for Open
Time Evaluation
Modyfikacja właściwości aplikacyjnych oraz użytkowych farb i tynków dyspersyjnych
poprzez zastosowanie środków wydłużających czas otwarty opartych na bazie dyspersji
woskowych. Laboratoryjne metody pomiaru czasu otwartego
39 C. Wallenhorst, J. Bissmeyer, R. Winter: ASK Chemicals Deutschland GmbH, Germany
(Presented by: P. Gutowski: ASK Chemicals Deutschland GmbH, Germany)
Binders for the Formulation of Wood Impregnation with Improved Properties
7
Spoiwa do impregnacji drewna o poprawionych właściwościach
40 T. Kolbusch, K. Crone, N. Meyer, L. Michels: Coatema Coating Machinery GmbH,
Germany
Process Technologies for Printed Electronic: an Overview of the Latest Trends and
Developments
Technologie procesu drukowania dla układów elektronicznych: przegląd najnowszych
kierunków rozwoju
41 P. Lenz: BYK-Chemie GmbH, Germany
Rheology Additives to Optimize the Viscosity Profile
Dodatki reologiczne zapewniające optymalną lepkość
42 R. Ismael: ARALON COLOR GmbH, Germany
Novel Developments in Fluorescent Pigments
Nowe osiągnięcia w dziedzinie pigmentów fluorescencyjnych
MACHINES & EQUIPMENT
43 A. Bangert: AZO GmbH + Co. KG, Germany
Increasing the Process Reliability – Handling of Challenging Bulk Materials
Zwiększenie niezawodności procesu – podawanie dużej ilości wymagających materiałów
44 C. Diddens: WILHELM NIEMANN GmbH & Co., Germany
Dispersing and Fine Grinding with KREIS-DISSOLVER® and KREIS-BASKET-
MILL®
Dyspergowanie oraz drobne mielenie przy użyciu urządzeń Kreis-Dissolver® i Kreis-Basket-
Mill®
45 H.-J. Jacob, M. Kaczmarek: ystral gmbh maschinenbau + processtechnik, Germany
Future Dispersion Technology in Lacquer and Paint Production
Nowa technologia dyspergowania w produkcji farb i lakierów
46 T. Więckowski, P. Król: PTH Eurotom Sp. z o.o., Poland
New Trends in Dispergation of Paints. New Equipment for Testing and Quality
Control of Coatings
Nowości w dyspergowaniu farb i lakierów. Nowe oprzyrządowanie do badania i kontroli
jakości powłok
47 S. Braeunlein, P. Marroquín: HOSOKAWA Alpine Aktiengesellschaft, Germany
Optimisation of Mill and Classifier Systems for the Production of Powder Paint
Optymalizacja systemów mielenia i sortowania w produkcji farb proszkowych
48 S. Braeunlein, P. Marroquín: HOSOKAWA Alpine Aktiengesellschaft, Germany
Creating Colours to Coat: Processing Pigments on Jet Mills
Barwienie wyrobów lakierowych: przetwórstwo pigmentów na młynach strumieniowych
ECOLOGY & LEGISLATION ASPECTS
49 S. Franco: BARPIMO SA, Spain
Development of New Thermosetting Resins from Polyethylene Terephthalate (PET)
Waste
Opracowanie nowych żywic termoutwardzalnych w oparciu o odpady politereftalanu
etylenowego
50 A. Kruf: GALACTIC, Belgium
8
Bio-Solvents as an Alternative for Traditional Solvents in General and Particular
Regarding the VOC Directives 2004/42/EU and 1999/13/EU
Biorozpuszczalniki jako alternatywa dla tradycyjnych rozpuszczalników, szczególnie w
świetle dyrektyw Unii Europejskiej w zakresie lotnych związków organicznych (VOC) –
2004/42/EU oraz 1999/13/EU
51 U. Schoknecht: Bundesanstalt für Materialforschung und -prüfung (BAM), Germany
Leaching of Biocides from Organic Coatings
Wymywanie środków biobójczych z powłok organicznych
TESTING, MEASUREMENTS & RESEARCH PROJECTS
52 K. Dekomien, A. Huxol*, A. Wagenführ**, A. Riegel*: PLANTAG Coatings GmbH,
Germany; *Ostwestfalen-Lippe University oAS, Germany; **Technische Universität
Dresden, Germany
Surface Quality Evaluation by Human Inspection
Oszacowanie jakości malowanych powierzchni badanych zmysłami ludzkimi
53 M. Pasich*, M. Siołek**,***, N. Henzel****, M. Matlengiewicz***: *Institute for
Engineering of Polymer Materials and Dyes, Paint and Plastics Department, Poland;
**Synthos SA, Poland; *** Silesian University, Department of Materials Chemistry and
Technology, Institute of Chemistry, Poland; ****Institute of Medical Technology and
Equipment, Poland
Comparison of the Microstructure of PnPrA and PiPrA Poly(propyl acrylates) Based
on the Analysis of Carbonyl Signal in the 13
C NMR Spectra
Porównanie mikrostruktury poli(akrylanu n-propylu), PnPrA, i poli(akrylanu izopropylu),
PiPrA, na podstawie analizy sygnału karbonylowego w widmach 13
C NMR
54 M. Siołek*,****, M. Pasich**, N. Henzel***; M. Matlengiewicz****: *Synthos S.A.,
Poland; **Institute for Engineering of Polymer Materials and Dyes, Paint and Plastics
Department, Poland; ***Institute of Medical Technology and Equipment, Poland;
****Silesian University, Department of Materials Chemistry and Technology, Institute of
Chemistry, Poland
Microstructural Analysis of Methyl Methacrylate/sec-Butyl Acrylate Copolymer by 13
C
NMR Spectroscopy
Analiza mikrostrukturalna kopolimeru metakrylanu metylu z akrylanem sec-butylu za
pomocą spektroskopii 13
C NMR
55 L. Matuskova: X-Rite GmbH, Czech Republic
Challenges in Color Measurement
Wyzwania w zakresie pomiaru barwy
56 R. Kozak, M. Matlengiewicz*: Synthos S.A., Poland; *Silesian University, Department of
Materials Chemistry and Technology, Institute of Chemistry, Poland
Tailoring Polybutadiene Properties via Application of σ and µ Polar Modifiers during
Anionic Polymerization
Regulacja właściwości polibutadienu otrzymanego w trakcie polimeryzacji anionowej
poprzez zastosowanie modyfikatorów polarnych typu σ oraz µ
57 I. Grianko, V. Soloveva, I. Kalinina, D. Vasilev, A. Ilyin*: YarLI, Russia; *Yaroslavl
State Technical University, Russia
The Influence of NCO/OH Ratio and Acrylic Polymer Structure on Curing and
Properties of 2К Polyurethane Coatings
Wpływ stosunku NCO/OH oraz struktury polimeru akrylowego na proces utwardzania oraz
właściwości dwuskładnikowych poliuretanowych wyrobów lakierowych
9
58 E. Moskalenko*, N. Vlasova*, A. Kostitsyn*, E. Indeikin*,**: *YarLI, Russia;
**Yaroslavl State Technical University, Russia
Peculiaritites of Solvent- and Waterborne Coating Formation
Specyfika tworzenia powłok dla rozpuszczalnikowych i wodnych wyrobów lakierowych
59 V. Voloshynets: National University "Lvivska Polytechnika", Ukraine
Distribution of (Meth)acrylates between Water and Monomeric Phases during
Emulsion Polymerization and Properties of Coatings and Films Received from
Synthesized Dispersions
Rozdział metakrylanów pomiędzy fazę wodną i monomeryczną podczas polimeryzacji
emulsyjnej oraz właściwości powłok otrzymanych w oparciu o zsyntezowane dyspersje
60 V. Soloveva, I. Grianko, I. Prosorova, D. Vasilev, A. Ilyin*: YarLI, Russia; *Yaroslavl
State Technical University, Russia
The Influence of Hydroxyl Functional Styrene Acrylic Copolymers on Curing and
Properties of Solventborne Polyurethane Coatings
Wpływ funkcjonalnych kopolimerów styrenowo-akrylowych z grupami hydroksylowymi na
proces utwardzania oraz właściwości rozpuszczalnikowych poliuretanowych wyrobów
lakierowych
POSTERS:
1 T. Böttge: iLF Forschungs- und Entwicklungsgesellschaft Lacke und Farben mbH, Germany
Quality Test of Aerosol Paints – Better Reproducibility by Automatic Application
Test jakości farb w aerozolu – Lepsza powtarzalność poprzez automatyczną aplikację
2 K. Bortel, E. Langer, H. Kuczyńska, W. Romaniuk*, M. Majchrzak*, K. Borek*,
K. Mazur*, W. Wardal*: Institute for Engineering of Polymer Materials and Dyes, Paint
and Plastics Department, Poland; *Institute of Technology and Life Sciences in Falenty,
Department in Warsaw, Poland
IR Reflecting Coatings for Roofing of Agricultural Buildings
Powłoki odbijające promieniowanie IR na pokrycia dachowe budynków inwentarskich
3 M. Lubik, J. Klitschke: Brüggemann Chemical, Germany
Novel Polymeric Dispersing Agent for Specific Pigment Groups
Nowy polimerowy środek dyspergujący dla specyficznych grup pigmentów
4 B. Pilch-Pitera, P. Król, Ł. Byczyński, J. Wojturska: Rzeszow University of Technology,
Poland
Blocked Polyisocyanates as Crosslinking Agents for Hydrophobic Polyurethane
Powder Clear Coatings
Blokowane poliizocyjaniany jako środki sieciujące do hydrofobowych poliuretanowych
lakierów proszkowych
5 T. Krystofiak, B. Lis, I. Szyperska*: Poznan University of Life Science, Department of
Wood Based Materials, Division of Gluing and Finishing of Wood, Poland; *Poznan
University of Technology, Institute of Physics, Poland
Investigations of Adhesion of Waterborne Lacquers with Nanosilica for the Beech
Wood (Fagus Sylvatica L.)
Badania adhezji wodorozcieńczalnych lakierów z udziałem nanokrzemionki do drewna buka
(Fagus sylvatica L.)
6 H. Kuczyńska, E. Langer, K. Bortel: Institute for Engineering of Polymer Materials and
Dyes, Paint and Plastics Department, Poland
10
Thermoplastic/Thermoset Coating for Decorating of Glass
Farba termoplastyczna/termoutwardzalna do zdobienia szkła
7 E. Langer, G. Kamińska-Bach: Institute for Engineering of Polymer Materials and Dyes,
Paint and Plastics Department, Poland
Thermodynamic Characteristic of Components of Pigmented, Polymeric Composition
Charakterystyka termodynamiczna składników pigmentowanych kompozycji polimerowych
8 E. Langer, K. Suchoń, M. Barth*: Institute for Engineering of Polymer Materials and
Dyes, Paint and Plastics Department, Poland; *Selena Labs Sp. z o.o., Poland
New Conception of Multifunctional Adhesives for Building Industry
Nowa koncepcja wielofunkcyjnych klejów dla budownictwa
9 T. Krystofiak, B. Lis, C. Csiha*, M. Muszyńska: Poznan University of Life Science,
Department of Wood Based Materials, Division of Gluing and Finishing of Wood, Poland;
*University of West Hungary in Sporon, Department of Furniture and Carpentry, Institute of
Wood Based Products and Technologies, Hungary
Investigations of Aging Resistance of Thermo-ash Wood (Fraxinus Excelsior L.)
Protected with Oil and Lacquer Systems
Badania odporności na starzenie drewna termojesionu (Fagus sylvatica L.) zabezpieczonego
systemami olejowymi i lakierowymi
10 B. Pilch-Pitera, M. Kędzierski*, M. Zdeb, P. Szałański: Rzeszow University of
Technology, Poland; *Industrial Chemistry Research Institute, Poland
Antibacterial Polyurethane-based Powder Clear Coatings Modified with
Montmorillonites
Poliuretanowe lakiery proszkowe modyfikowane montmorylonitami o działaniu
antybakteryjnym
CONFERENCE LANGUAGE:
The Conference will be conducted in English/Polish. Both presentation of papers and
discussions will be interpreted simultaneously into Polish/English.
CONFERENCE DINNER:
The Conference Dinner will be held in the Restaurant "NEMO – Wodny Świat" on Wednesday
9 November 2016 at 7:30 PM. Address: 41-300 Dąbrowa Górnicza, 1, Aleja Róż (Haller’s
Park) – 10 min walking distance from Conf. Venue, a map below
Taxis will be organised to take Delegates from the Conference venue to the Restaurant.
11
REGISTRATION:
Registration of participants will take place in front of the Conference Hall in Conference
Pavilion on the 7th
of November 2016 from 4:00 PM till 7:00 PM and on the 8th
of
November 2016 from 8:00 AM.
PAYMENT:
A total Conference fee for one participant is:
a) € 350
b) Special reduced fee for Speakers and persons presenting a scientific poster (not Co-authors)
€ 300
The Conference fee includes:
— One set of Conference Proceedings
— ACT '16 Bulletin
— List of Delegates and participating Companies
— Lunch, Coffee/Tea on 8, 9 & 10 November 2016
— Conference Dinner on 9 November 2016
— Car park at Expo Silesia
A CONFERENCE FEE SHOULD BE PAID:
a) By bank transfer (costs of bank transfer should be covered by the Delegate)
till the 3rd
of October 2016 to:
Bank PEKAO SA II Oddział w Gliwicach
SWIFT CODE (BIC): PKOPPLPW
IBAN code (account №): PL 64 1240 2991 1111 0010 2073 9460 for IMPiB, ACT ‘16 Conference
12
Bank address: ul. Bohaterów Getta Warszawskiego 9, 44-100 Gliwice, Poland
The Delegate's name and ACT '16 must be mentioned on the draft and a copy of the request
to the bank.
b) By cash at the registration desk.
Credit cards will not be accepted.
Note: In case payment is effected in Polish currency, average rate in NBP should be considered
(at the day of payment).
PROMOTION:
POSTERS: Both promotion and scientific posters for presentation during ACT '16 should be
delivered to the Institute before the 30th
of October 2016 or delivered to the
Organisers before the Conference in Sosnowiec.
Size of poster: max 975 mm (height) × max 945 mm (width).
A price for presentation of promotion poster is 180 €.
INSERTS: Inserts in Conference Set: up to 3 pages (size A-4) of information material can be
included into Conference Set.
Price – 180 €
Inserts in the amount of 120 copies should be delivered to the Institute before
the 30th
of October 2016.
PROMOTION DESK: Located in front of the Conference Hall.
Price – 290 €
Both Posters and Inserts should be delivered to the address: Institute for Engineering of Polymer
Materials and Dyes, Paint & Plastics Department, ul. Chorzowska 50A, 44-100 Gliwice, Poland.
Payment for promotion should be transferred to the account mentioned above before
the 30th
of October 2016.
CAR PARK:
Free car park will be available at EXPO Silesia for ACT '16 Delegates.
ACCOMMODATION:
Below please find the list of selected hotels. Most of them have offered a reduced price for the
ACT '16 Delegates.
In order to secure hotel reservation please contact the chosen hotel in advance.
Payment for hotel will be done by ACT '16 Delegates at the Hotel.
13
LIST of HOTELS:
NOVOTEL KATOWICE CENTRUM****
Address: Al. Roździeńskiego 16, 40-202 Katowice
(city centre, 15 km from Expo Silesia)
Tel.: +48 32 2004450 /51
Fax: +48 32 2004411 /12
e-mail (for reservation): [email protected];
[email protected]; [email protected]
www.novotel.com
Special price per 1 night for ACT '16
participants, breakfast included:
single room – 179 Polish zlotys
double/twin room – 208 Polish zlotys
reservation should be done by e-mail and
guaranteed by credit card.
Smoking is not allowed in the hotel
HOLIDAY INN Dąbrowa Górnicza****
Address: ul. Aleja Róż 1A, 41-300 Dąbrowa
Górnicza
(less than 1 km from Expo Silesia)
Tel.: +48 32 7550000
Fax: +48 32 7337711
e-mail: [email protected]
www.hidabrowa.pl
Special price per 1 night for ACT’16
participants, breakfast included:
single room – 395 Polish zlotys
double/twin room – 450 Polish zlotys
QUBUS HOTEL Prestige Katowice****
Address: ul. Uniwersytecka 13, 40-007 Katowice
(city centre, 20 km from Expo Silesia)
Tel.: +48 32 601 0100
Fax.: +48 32 601 0200
e-mail: [email protected] /
Booking on password ACT’16 made by the
www.qubushotel.com
Special price per 1 night, breakfast included:
single room – 250 Polish zlotys
twin room – 300 Polish zlotys
HOTEL SZAFRAN****
Address: ul. Będzińska 82, 41-250 Czeladź
(9 km from Expo Silesia)
Tel.: +48 32 784 3100
Fax: +48 32 784 3103
e-mail: [email protected]
www.hotelszafran.pl
Special price per 1 night for ACT '16
participants, breakfast included:
single room – 199 Polish zlotys
double/twin room – 239 Polish zlotys
Hotel DIAMENT Plaza Katowice****
Address: ul. Dworcowa 9, 40-012 Katowice
(city centre)
Tel.: +48 32 746 7000
Fax.: +48 32 746 7001
e-mail: [email protected]
www.hotelediament.pl
Special price per 1 night for ACT '16
participants, breakfast included:
single room – 319 Polish zlotys
double/twin room – 389 Polish zlotys
Park Hotel DIAMENT Katowice****
Address: ul. Wita Stwosza 37, 40-042 Katowice
(at the A-4 motor-way, 18 km from
Expo Silesia)
Tel.: +48 32 720 0000
Fax: +48 32 720 0001
e-mail: [email protected]
www.hotelediament.pl
Special price per 1 night for ACT '16
participants, breakfast included:
single room – 245 Polish zlotys
twin room – 290 Polish zlotys
Hotel DIAMENT Spodek***
Address: ul. Korfantego 35, 40-005 Katowice
(city centre)
Tel.: +48 32 606 8585
e-mail: [email protected]
www.hotelediament.pl
Special prince per 1 night for ACT’16
participants, breakfast included:
single room – 245 Polish zlotys
twin room – 290 Polish zlotys
SENATOR***
Address: ul. 1 Maja 3, 40-224 Katowice
(city centre)
Tel.: +48 32 2586081 to 83
Fax: +48 32 2586083
e-mail: [email protected]
www.senator.katowice.pl
Special price per 1 night for ACT '16
participants, breakfast included:
double room for 1 pers. – 170 Polish zlotys
double room for 2 pers. – 190 Polish zlotys
M HOTEL Sosnowiec***
Address: ul. Wojska Polskiego 199,
41-208 Sosnowiec (6 km from Expo Silesia)
Tel.: +48 32 363 6300
Fax: +48 32 363 6306
14
e-mail: [email protected]
www.mhotelsosnowiec.pl
Special price per 1 night for ACT’16
participants:
single/twin room – 248 Polish zlotys
double room – 298 Polish zlotys
+ 28 Polish zlotys for breakfast per person
+ 18 Polish zlotys parking
KATOWICE**
Address: Al. Korfantego 9, 40-951 Katowice
(city centre, 15 km from Expo Silesia)
Tel.: +48 32 2561111, +48 32 2588281;
+48 32 2598021
Fax: +48 32 2597526
e-mail: [email protected]
www.hotel-katowice.com.pl
Special price per 1 night for ACT '16
participants, breakfast included:
single room – 120 Polish zlotys
twin room – 180 Polish zlotys
Hotel Dąbrowiak**
Address: ul. Wybickiego 1, 41-303 Dąbrowa
Górnicza (7 km from Expo Silesia)
Tel.: +48 32 268 9113
e-mail: [email protected]
www.hoteldabrowiak.com.pl
double room – 90 Polish zlotys
+ 15 Polish zlotys for breakfast per person
Hotel Standard**
Address: ul. Magazynowa 1 A, 42-530 Dąbrowa
Górnicza (6 km from Expo Silesia)
Tel.: +48 32 639 9660
Fax: +48 32 268 5036
Mobile: +48 696 064 595
e-mail: [email protected]
www.hotelstandard.pl
Special price per 1 night for ACT '16
participants, breakfast included:
single room – 110 Polish zlotys
double/twin room – 150 Polish zlotys
Hotel ORION**
Address: ul. Przyjaciół Żołnierza 5A, 41-200
Sosnowiec (8 km from Expo Silesia)
Tel.: +48 32 266 1897; +48 32 266 7033
Fax: +48 32 266 7158
e-mail: [email protected]
www.hotelorion.pl
Special price per 1 night for ACT ’16
participants, breakfast included:
single room – 125 Polish zlotys
twin/double room – 145 Polish zlotys
Hotel ASTRA**
Address: ul. Morcinka 14, 41-303 Dąbrowa
Górnicza (4 km from Expo Silesia)
Tel.: +48 32 268 2915
Mobile: 606 739 637
e-mail: [email protected]>
www.astra.media.pl
single room – 110 Polish zlotys
double room – 130 Polish zlotys
+ 15 Polish zlotys for breakfast per person
IBIS BUDGET Katowice Centrum*
Address: Al. Roździeńskiego 18, 40-202 Katowice
(city centre)
Tel.: +48 32 3505040
Fax: +48 32 2555501
Reservations should be made by e-mail:
[email protected] till 31.10.2016
www.ibisbudget.com
Special price per 1 night for ACT '16
participants, breakfast included:
for 1 person – 114 Polish zlotys
for 2 persons – 129 Polish zlotys
Zajazd BACHUS
Address: ul. Staszica 42, 41-303 Dąbrowa Górnicza
(1 km from Expo Silesia)
Tel./Fax: +48 32 2687660
e-mail: [email protected]
www.zajazdbachus.pl
single room – 130 Polish zlotys
twin room – 150 Polish zlotys
+ 20 Polish zlotys for breakfast per person
Oberża ŻAR (former Zajazd JURAN)
Address: ul. Staszica 34, 41-300 Dąbrowa Górnicza
(1 km from Expo Silesia)
Tel./Fax: +48 32 264 3434
Mobile: +48 505 086 520
Special price for ACT’16 participants per
1 night, breakfast included:
single room – 110 Polish zlotys
twin room – 170 Polish zlotys
double room – 140 Polish zlotys
Zajazd IRYS
Address: ul. Małobądzka 1, 41-200 Sosnowiec
(4 km from Expo Silesia)
Tel.: +48 32 291 8956
single room – 60 Polish zlotys
2 pers. room – 90 Polish zlotys
15
TRAVEL:
By air
There are flights to Warsaw, Kraków (BALICE Airport) and Katowice (PYRZOWICE Airport)
from European countries.
From Warsaw to Sosnowiec or Katowice: by train (around three hours).
From Kraków to Katowice: by train (around 2 ½ hours) or bus from the main bus Station (near
the railway station – 1 ½ hour).
By rail
There are trains from many European countries going directly to Katowice.
From Katowice city centre to the venue (Expo Silesia):
the bus stop at Piotra Skargi str.
- bus № 808, 811
It takes around 30 – 40 min to get from Katowice to Expo Silesia by bus.
From Sosnowiec city centre to the venue:
The bus stop is situated vis-à vis the railway station
- bus № 808, 811, 690, 55
By taxi:
POLONIA TAXI gives special rates for Expo Silesia and Institute’s guests for fixed courses:
Katowice city centre – Expo Silesia 50 Polish zlotys
Sosnowiec city centre – Expo Silesia 20 Polish zlotys
Katowice Airport (Pyrzowice) – Expo Silesia 90 Polish zlotys
Tel.: +48 32 263 5555 – it is necesseray to refer to ―Expo Silesia guest‖.
By car:
GPS to Expo Silesia: 50 18' 53.721" N
19 11' 49.313" E
More information can be found at: www.exposilesia.pl
16
Contact:
Ms Anna PAJĄK – Conference Manager
Institute for Engineering of Polymer Materials and Dyes,
Paint & Plastics Department in Gliwice
ul. Chorzowska 50A, 44-100 Gliwice
tel.: +48 32 231 9041 –2 ext. 39; direct: +48 32 231 9043;
fax: +48 32 231 2674; e-mail: [email protected]
Kierunek Katowice
Kierunek Kraków – >