Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
Maistraße 2 - D-82110 Germering, Phone: +49 (0)89 / 894 222 74, Fax: +49 (0)89 / 894 222 33, Email: [email protected] alldaq.com
78-pin D-Sub connector
Up to 0.7 A per output
ADQ-22/23 Series
Well filtered and isolated!
ALLDAQ – Your partner for measurement and automation
Isolated digital outputs
Isolated inputs with filter and interrupt functionUp to 0.6 A per output
Digital I/O boards with isolated digital inputs and out-puts, 8 TTL digital I/Os, opt. 8 SPDT relays
Well filtered and isolated = perfectly for industrial applications!
The boards of the ALLDAQ ADQ-22/23 series are digital I/O boards for use in industrial automation and control envi-ronments. Alternatively models for CompactPCI Serial and standard PCI Express bus are provided. Beside the obligatory isolation these boards also offer the possibility to program a digital filter per input port, e. g. for protection against bouncing. Additionally parasitic effects between field wiring and PC can be suppressed efficiently by an electrical isolation of 500 VACRMS. 32 (ADQ-22) resp. 24 (ADQ-23) isolated digital inputs and 32 (ADQ-22) resp. 16 (ADQ-23) digital outputs are available. The streaming operation enables the continuous sampling of all digital inputs resp. streaming a bit-pattern to all digital outputs up to 1 kHz. The ADQ-23 provides 8 SPDT relays (35 V/1 A).
The isolated inputs have a Schmitt trigger characteristic according to IEC 61131-2 (type 1) and are designed for a maximum input voltage of 35 V. All isolated inputs are assembled with status LEDs and can generate an interrupt on bit-pattern change, bit-pattern match or missing external supply.
The isolated outputs can drive up to 0.6 A. To increase the output current connecting the outputs in parallel is possible. This implies that no external drivers are necessary for many applications. For powering the outputs an external power supply in the range of 11..35 V with sufficient power must be provided. The output buffers come with a thermal overload protection, current limitation, short-circuit protection and an under-voltage monitoring.
ADQ-23 with 8 SPDT relays max. 35 V/1 A (AC/DC)
8 SPDT relays
8 TTL digital I/Os
Software streaming for continuous input/output
ALLDAQ - Your partner for measurement and automation.
ADQ-22/23 Series – Isolated Digital I/O Boards
Specifications
ADQ-22-PCIe / ADQ-22-cPCIS ADQ-23-PCIe / ADQ-23-cPCIS
Isolated digital inputsNumber of ports 2 x 16 bit (status LEDs per channel) 3 x 8 bit (status LEDs per channel)
Isolation up to 500 VAC isolated according to EN60664-1, UL1577
Voltage level Threshold voltage L → H: max. 15 V @ VEXT_DI=24 VThreshold voltage H → L: min. 11 V @ VEXT_DI=24 V
Digital filter Programmable filter: 10 ms / 3.2 ms / 1 ms / 10 µs (bypass)
Interrupt mode Generation of an interrupt event on bit-pattern change or bit-pattern match possible, as well as on undervoltage at VEXT_DI < 12.1 V
External supply VEXT_DI VEXT_DI: 9.6…35 V, typ. 24 V
Isolated digital outputs / RelaysNumber of ports 2 x 16 bit 2 x 8 bit
Isolation up to 500 VAC isolated
Voltage level Output high level: UOH = 11..35 V according to IEC 61131-2 (type 1)
Output current max. 0.6 A per channel, parallel switching possible
Over-load protection Current limitation per channel, wide over-load protection per port, IRQ, error LED on-board
External supply VEXT_DO 11..35 V, typ. 24 V; current on full load: 19.2 A 11..35 V, typ. 24 V; current on full load: 9.6 A
Relays – 8 SPDT relays (type C), 35 V/1 A (DC/AC)
TTL digital I/OsNumber of ports 1 x 8 bit bi-directional (direction per port programmable)
Level 3.3 V or 5 V switchable (TTL compatible); IO = 10 mA / channel
GeneralStreaming mode Software-controlled streaming operation for continuous I/O operation at each digital port
up to 1 kHz (depending on operating system and computer configuration)
Power consumption PCIe +3.3 V via slot: typ. 450 mA (quiescent current) +5 V via Molex connector: max. 1 A (incl. load via VCC_OUT)
Power consumption cPCIS +12 V via backplane: typ. 0.6 A including load at VCC_OUT of max. 1 A
Environment Temperature operation: 0..70 °CHumidity operation: 20%..55% (not condensing)
Certifications EMC Directive 2004/108/EG, emission EN 55022, noise immunity EN 50082-2, RoHS
PC interface (depends on model) PCIe-Versionen: PCI-Express x1 Rev. 1.0acPCIS-Versionen: CompactPCI Serial Rev. 1.0a
Dimensions (without mounting bracket and connector)
ADQ-22/23-PCIe: 158 mm x 111,15 mm (W x H) ADQ-22/23-cPCIS: 3 U CompactPCI Serial board
Connectors 78-pin D-Sub female connector, 25-pin D-Sub female connector via adapter cable
Manufacturer warranty 36 months
Maistraße 2 - D-82110 Germering, Phone: +49 (0)89 / 894 222 74, Fax: +49 (0)89 / 894 222 33, Email: [email protected] alldaq.com
ADQ-22/23 Series – Isolated Digital I/O Boards
ADQ-22
DO_C15…0
DIO_E7…0
GND_EXT
DI_A15…0
GND_EXT
VEXT_DO
GND_PC
VCC_OUT (+5 V)
DO Port C
GND_EXT
VEXT_DI
DI_B15…0
IRQ
DO_D15…0
GND_EXT
VEXT_DO
IRQ
DI Port A
DI Port B
DO Port D
DIO
Por
t E
IDC
conn
ecto
r78
-pin
D-S
ub fe
mal
e co
nnec
tor
Address-/data bus
CompactPCI Serial / PCI Express interface
Mol
ex c
onne
ctor
(+5V
for P
CI E
xpre
ss)
Interrupt
Control and interrupt logic
Temperature monitoring
Temperature monitoring
TTL-I/Os(1 x 8 bit port)
Current limitation per channel
Current limitation per channel
Opto isolated up to 500 V
IRQBit-pattern match
Bit-pattern change
16 bit digital input
IRQBit-pattern match
Bit-pattern change
16 bit digital input
25-p
in D
-Sub
fem
ale
Digital�lter
Digital�lter
16 bit output port
16 bit output port
16 bit input port
16 bit input port
ADQ-23
DO_E7…0
DIO_G7…0
GND_EXT
DI_A7…0
GND_EXT
VEXT_DO
GND_PC
VCC_OUT (+5 V)
DI Port C
GND_EXT
VEXT_DI
DI_B7…0
IRQ
DO_F7…0
GND_EXT
VEXT_DO
IRQ
DI Port A
DI Port B
DO Port E
DO Port F
Relais Port D
DIO
Por
t G
GND_EXT
DI_C7…0
CO_x
NO_x
NC_x
IDC
conn
ecto
r78
-pin
D-S
ub fe
mal
e co
nnec
tor
Address-/data bus
CompactPCI Serial / PCI Express interface
Mol
ex c
onne
ctor
(+5V
for P
CI E
xpre
ss)
Interrupt
Control and interrupt logic
Temperature monitoring
Temperature monitoring
TTL-I/Os(1 x 8 bit port)
Current limitation per channel
Current limitation per channel
Opto isolated up to 500 V
IRQBit-pattern match
Bit-pattern change
8 bit digital input
IRQBit-pattern match
Bit-pattern change
8 bit digital input
IRQBit-pattern match
Bit-pattern change
8 bit digital input
Digital�lter
Digital�lter
Digital�lter
8 bit output port
8 bit output port
8 bit input port
8 bit input port
8 bit input port
25-p
in D
-Sub
fem
ale
Block Diagram
Software Support
LabVIEW™ VIsFor LabVIEW™ users we provide a library with virtual ins-truments (VIs) for easy access to your ALLDAQ hardware.
MATLAB® SupportAn adapted MATLAB® interface for the ALLDAQ hardware with examples and a help file is inclu-
ded with the ALLDAQ SDK.
Remote PC (measuring system) Host PC
192.168.1.1Remote Access via EthernetThe newest extension of the ADQ driver sys-tem enables the easy access to your ALLDAQ hardware via the local network (LAN). The pro-gramming is done as usual by the standard-API functions.
NEW!
•Drivers for Windows 10 / 8.1 / 8 / 7 / Vista SP2 (32 and 64 bit)
•API with a unique programming logic
•Programming support (SDK) with examples for C++, C#, Visual Basic, Delphi/Pascal and Python included
•ALLDAQ Manager - Utility software offers a quick overview of para meters of the ALLDAQ driver system and offers a central access to the SDK, software tools and help files
Do you need further software support - also for third-party manufacturer? Our software specialists like to advice you!
ALLDAQ Manager• Informations on the installed ALLDAQ hardware in overview
•XML export of the driver configuration for archiving and support
•Tool for interactive illustration of the pin-assignment with the possibility to generate a PDF file
•Tool for user calibration
•Convenient access to the software developer kit (SDK) for high-level language programming with examples and simple test pro-grams as well as to the help files
Coming soon!
ADQ-22/23 Series – Isolated Digital I/O Boards
ADQ-22-PCIe (Art. No. 115549)or ADQ-22-cPCIS (Art. No. 115550)or ADQ-23-PCIe (Art. No. 115551)
or ADQ-23-cPCIS (Art. No. 115552)
25-pin D-Sub male connector (Art. No. 112353)78-pin D-Sub male connector (Art. No. 112355)
Adapter cable with mounting bracket from 20-pin IDC connec-tor to 25-pin D-Sub female connector
ADQ-AP-D25F-cPCI (Art. No. 111755) orADQ-AP-D25F-PCIe (Art. No. 111756)
Package Content
ALLDAQ - a division of ALLNET GmbH ComputersystemeMaistrasse 2 - D-82110 Germering, Phone: +49 (0)89 / 894 222 74, Fax: +49 (0)89 / 894 222 33, Email: [email protected]
Do you need an individual offer? Contact our sales team under: +49 (0)89-894 222 74 or per email: [email protected].© 2016 by ALLDAQ a division of ALLNET GmbH Computersysteme. Errors and changes reserved. Rev. 1.1 en
Accessories (optional):
Contact us for our attractive bundle offerings.
Bundle Offerings
Ordering Info
Figure: ADQ-10-cPCI incl. 37-pin cable and 37-pin terminal block
alldaq.com
25-pin terminal block (111752)
Shielded cables (see ordering infos)
78-pin terminal block (111751)
Name Art. No. Description
ADQ-22-PCIe 115549 PCI Express digital I/O board, 32 isolated DIs with filter, 32 isolated DOs, 8 TTL DIOs
ADQ-22-cPCIS 115550 CompactPCI Serial digital I/O board, 32 isolated DIs with filter, 32 isolated DOs, 8 TTL DIOs
ADQ-23-PCIe 115551 PCIe digital I/O board, 24 isolated DIs with filter, 16 isolated DOs, 8 relays (type C), 8 TTL DIOs
ADQ-23-cPCIS 115552 CompactPCI Serial digital I/O board, 24 isolated DIs with filter, 16 isolated DOs, 8 relays (type C), 8 TTL DIOs
Suitable accessory
ADQ-CR-D25M-D25F-1,8m 111752 Cable shielded from 25-pin D-Sub male connector to 25-pin D-Sub-D female connector, length: 1.8 m
ADQ-CR-D78M-D78F-1,5m 111754 Cable shielded from 78-pin D-Sub male connector to 78-pin D-Sub female connector, length: 1.5 m
ADQ-TB-D25M-HUT 111749 Terminal block for DIN rail mounting with 25-pin D-Sub male connector to Phoenix type clamps
ADQ-TB-D78M-HUT 111751 Terminal block for DIN rail mounting with 78-pin D-Sub male connector to Phoenix type clamps
TOP!
ADQPDFPDF Documentation and driver software are provided by download under: www.alldaq.com/downloads.
Everything from one source.Complete systems for measurement and control in a compact desktop housing or for mounting in a 19“ rack. Alternatively with a bus extension or with an independent slot CPU.
Complete Solutions