Drawings

All Rights Reserved. Copyright © 2013, Yokogawa Electric Corporation.Subject to change without notice. Printed in Japan.

P -

ADMAG TI SeriesAXW Magnetic Flowmeter[Size: 500 to 1000 mm (20 to 40 in.)]Flange JIS 10K (Process Connection Code CJ1)

SD 01E25D11-05EN1st Edition: Apr. 2017 (KP)5th Edition: Dec. 2017 (KP)

SD 01E25D11-05EN

Unit: mm (approx. in.)

*1:This length becomes 21 mm (0.83 in.) shorter when indicator code N is selected.*2:The thickness of optional grounding rings (4mm per one) and customer supplied gaskets are not included in “L” here.

F01.ai

L*2

Ground Terminal(M4)Eye Bolt

(H2

Hi

)

(H3)

48 (1.89)150 (5.91)

42 (1

.65)

42 (1

.65)

ø 86 (3.38)

H1 H

r

68 (2.68)

56 (2.20)*1

232 (9.13)*1

25 (0.98)48 (1.89)

83 (3.27)

ø128

(5.0

4)

111 (4.37)θ°

(ød)øC øD

N-øh

IntegralFlowmeter

IntegralFlowmeter

RemoteSensor

RemoteSensor

Ground Terminal(M4)

Direction of Cable Entry

Standard(0°)

+90°rotation

+180°rotation

-90°rotation

Optional Code RA

Optional Code RB

Optional Code RC

Integral Flowmeter

Cable Entry Display Cable Entry Display

Remote Sensor

Front Side Cable Entry Back Side Cable Entry

* The direction of cable entry changes as shown left depending on the designation of the optional code RA, RB, or RC.

Unless otherwise specifi ed, diff erence in the dimensions are specifi ed as : General tolerance = ± (Criteria of tolerance class IT18 in JIS B0401-1) / 2

All Rights Reserved. Copyright © 2013, Yokogawa Electric Corporation.

P -

2

SD 01E25D11-05EN

Model code: AXW - - CJ1N -

Unit: mm (approx. in.)Process Connection Code CJ1Flange Type JIS B2220 10KSize Code 500 600 700 800 900 10LSize 500 (20) 600 (24) 700 (28) 800 (32) 900 (36) 1000 (40)Lining Code H, F, U, DLay Length L 600 (23.62) 720 (28.35) 840 (33.07) 960 (37.80) 1080 (42.52) 1200 (47.24)Flange Outer Diameter øD 675 (26.57) 795 (31.30) 905 (35.63) 1020 (40.16) 1120 (44.09) 1235 (48.62)Bolt Circle Diameter øC 620 (24.41) 730 (28.74) 840 (33.07) 950 (37.40) 1050 (41.34) 1160 (45.67)Inner Diameter ød Lining H, F, D 477 (18.78) 578 (22.76) 675 (26.57) 777 (30.59) 878 (34.57) 976 (38.43)

Lining U 469 (18.46) 570 (22.44) 667 (26.26) 769 (30.28) 870 (34.25) 968 (38.11)Bolt Hole Pitch Half Angle θ 9° 7.5° 7.5° 6.4° 6.4° 6.4°Bolt Hole Diameter øh 27 (1.06) 33 (1.30) 33 (1.30) 33 (1.30) 33 (1.30) 39 (1.54)Number of Bolt Holes N 20 24 24 28 28 28Height H1 735 (28.94) 855 (33.66) 965 (37.99) 1091 (42.95) 1191 (46.89) 1325 (52.17)Remote Sensor, Height H2 408 (16.06) 459 (18.07) 509 (20.04) 560 (22.05) 611 (24.06) 662 (26.06)Remote Sensor, Maximum Height Hr 800 (31.50) 911 (35.87) 1016 (40.00) 1124 (44.25) 1225 (48.23) 1334 (52.2)Inner Diameter of Eye Bolt 35 (1.38) 35 (1.38) 35 (1.38) 40 (1.57) 40 (1.57) 50 (1.97)Remote Sensor, Approx. Weight, Unit: kg (lb) (*1) 156 (344) 223 (492) 310 (683) 408 (899) 522 (1151) 689 (1519)

Integral Flowmeter, Height H3 438 (17.24) 489 (19.26) 538 (21.20) 590 (23.21) 641 (25.24) 692 (27.25)Integral Flowmeter, Maximum Height Hi 839 (33.01) 950 (37.39) 1054 (41.49) 1163 (45.77) 1264 (49.77) 1373 (54.04)

Integral Flowmeter, Approx. Weight, Unit: kg (lb) 159 (351) 226 (498) 313 (690) 411 (906) 525 (1157) 692 (1526)

*1: When submersible use or optional code DHC is selected, waterproof glands with union joints and cables are attached. When the cable length is 30-meters, add 9.5 kg (20.9 lb) to the weight in the table.

All Rights Reserved. Copyright © 2013, Yokogawa Electric Corporation.

P -

3

SD 01E25D11-05EN

Terminal Configuration and WiringRemote Sensor:<To be wired to Remote Transmitter>

F02.ai

Flow Signal Output

Excitation Current Input

Description

Protective Grounding(Outside of the terminal box)

Terminal SymbolABC

EX1EX2

Note: When submersible use or optional code DHC is selected, waterproof glands with union joints and cables are attached.

Integral Flowmeter:<To be wired to Power Supply and I/Os>

F03.ai

M4 Screw Type

Clamp Type

Terminal Symbol

N/-L/+

I/O4 -I/O4 +I/O3 -I/O3 +I/O2 -I/O2 +I/O1 -I/O1 +

Pulse/Status Output 1

Current Output 1

Selected Input/Output

Functional Grounding

Shorting Screw(Need to be fixed for normal operation)

Protective Grounding(Inside and outside of the terminal box)

Description

Power Supply