2
PT507 Features GL Approved Env. cat. D EN60945 compliant EMC2 Universal input (90 – 265Vac) Efficiency above 85% Adjustable output Overload and overvoltage protection Conformal coating DC OK LED Cooling by free air convection DIN-Rail mounting on back or side RoHS compliant PT507 75W DIN-Rail AC/DC power supply for marine and offshore applications Input Input Range 90 - 265 Vac , 125 – 375 Vdc Frequency 47 - 440 Hz Inrush Current 10 A; cold start @ 230Vac / 25°C Input Current <0.6 A @ 230Vac Input fuse 1 AT; internal, not user serviceable Efficiency >85% Safety ground leakage current <3.5 mA Output Output Voltage 24V adjustable 23 - 29 V Output Power 75 W Minimum load 0A Load Regulation ± 0.5 % Temperature coefficient ± 0.02 %/°C Overvoltage protection 32 V Overload protection Constant current Peak short circuit current 5A(100 ms) Turn-on delay 0.5 s @ 90 Vac DC OK signalling Green LED on front DC OK Relay Potential free contacts NO & NC , I<1A , V<30V EMC Specifications Emissions EN60945 EMC2 conducted & radiated Harmonics EN61000-3-2 compliant ESD EN61000-4-2 Air ± 8 kV Contact ± 4 kV Electromagnetic fields EN61000-4-3 10V/m 8MHz-2GHz EFT/Burst EN61000-4-4 2kV Surge EN61000-4-5 Line - Line 0.5kV Line - GND 1kV Conducted immunity EN61000-4-6 3VRMS, 150kHz-80MHz Conducted LF IEC60533 3VRMS, 50Hz-12kHz HV immunity IEC60947-2 2kV, 60s Environmental Thermal performance Operating -25 - +70°C without derating Storage -40 - +85°C Humidity 5 - 95%; non-condensing @ +55°C Conformal coating Vibration Germanischer Lloyd table 3.16 High vibration strain ±1.6 mm displacement; 2 – 25 Hz 4g; 25 - 100 Hz (1 octave/min) Altitude 10,000 feet; operating 30,000 feet; non-operating General Isolation voltage Input/Output 3000 Vac Input/Chassis 1500 Vac Safety According to UL60950 Weight Approximately 0.6 kg Warranty 2 Years Specifications subject to change without notice Rev. 4 THE POWER SOLUTION COMPANY

Adjustable output - Custom power supplies · Other Power Technics products for Marine and Offshore Applications PT502 125 W DIN-Rail AC/DC Power Supply PT503 250 W DIN-Rail AC/DC

  • Upload
    others

  • View
    10

  • Download
    0

Embed Size (px)

Citation preview

PT

50

7

Featu

res

• GLApprovedEnv.cat.D• EN60945compliantEMC2• Universalinput(90–265Vac)• Efficiencyabove85%• Adjustableoutput• Overloadandovervoltageprotection• Conformalcoating• DCOKLED• Coolingbyfreeairconvection• DIN-Railmountingonbackorside• RoHScompliant

PT507 75WDIN-RailAC/DCpowersupplyformarineandoffshoreapplications

Input InputRange 90-265Vac,125–375Vdc

Frequency 47-440Hz InrushCurrent 10A;coldstart@230Vac/25°C InputCurrent <0.6A@230Vac

Inputfuse 1AT;internal,notuserserviceable Efficiency >85% Safetyground leakagecurrent <3.5mA

Output OutputVoltage 24V adjustable23-29V OutputPower 75W Minimumload 0A LoadRegulation ±0.5% Temperaturecoefficient ±0.02%/°C Overvoltageprotection 32V Overloadprotection Constantcurrent Peakshortcircuitcurrent 5A(≤100ms) Turn-ondelay ≤0.5s@90Vac

DCOKsignalling GreenLEDonfront DCOKRelay PotentialfreecontactsNO& NC,I<1A,V<30V

EMC Specifications Emissions EN60945EMC2conducted&radiated Harmonics EN61000-3-2 compliant ESD EN61000-4-2 Air±8kV Contact±4kVElectromagneticfields EN61000-4-3 10V/m8MHz-2GHz EFT/Burst EN61000-4-4 2kV Surge EN61000-4-5 Line-Line0.5kV Line-GND1kV Conductedimmunity EN61000-4-6 3VRMS,150kHz-80MHz ConductedLF IEC60533 3VRMS,50Hz-12kHz HVimmunity IEC60947-2 2kV,60s

Environmental

Thermalperformance Operating -25-+70°Cwithoutderating Storage -40-+85°C Humidity 5-95%;non-condensing@+55°C Conformalcoating Vibration GermanischerLloydtable3.16

Highvibrationstrain ±1.6mmdisplacement;2–25Hz 4g;25-100Hz(1octave/min) Altitude 10,000feet;operating 30,000feet;non-operating

General

Isolationvoltage Input/Output 3000Vac

Input/Chassis 1500Vac

Safety AccordingtoUL60950 Weight Approximately0.6kg Warranty 2Years

Specificationssubjecttochangewithoutnotice Rev.4

THE POWER SOLUTION COMPANY

Input Connector Pin Function 1 SafetyGround 2 Neutral 3 Line

Output Connector Pin Function 1 OutputDC- 2 OutputDC- 3 OutputDC+ 4 OutputDC+

Wire Gauge AWG 24-12 Solid 0.2-4mm2

Flexible 0.2-2.5mm2

DimensionsHeight 134mm Width 43mm Depth 126mmExcludingDIN-Railmountingdevice Add10mmforstandardmountingdeviceandEN50022DIN-Rail

Approvals GermanischerLloyd Environmentalcategory:D,EMC2 GuidelinesforthePerformanceofType ApprovalsChapter2,Edition2003 LowVoltageDirective73/23/EECand93/68/EEC EMCDirective89/336/EECand92/31/EECand93/68/EECOther Power Technics productsfor Marine and Offshore Applications

PT502 125W DIN-RailAC/DCPowerSupplyPT503 250W DIN-RailAC/DCPowerSupplyPT504 500W DIN-RailAC/DCPowerSupplyPT506 75W DIN-RailAC/DCPowerSupplyPT505 250W DIN-RailDC/DCPowerSupplyPT510 DIN-RailRedundancyModule

Specificationssubjecttochangewithoutnotice Rev.4

THE POWER SOLUTION COMPANY

PT

50

7

PowerTechnicsBV Tel:+(31)765038350 [email protected] Fax:+(31)765012038 www.powertechnics.nl4879AZEtten-Leur TheNetherlands

PT507 . 75W DIN-Rail AC/DC power supply for marine and offshore applications

Power Technics BV Tel : +(31) 76 503 83 50 e-mail : [email protected]

Nijverheidsweg 126 Fax : +(31) 76 501 20 38 web : www.powertechnics.nl 4879 AZ Etten-Leur The Netherlands Specifications subject to change without notice Rev. 4

Preliminary

Front view Side view

Pin Function Height 134 mm 1 Safety Ground Width 43 mm 2 Neutral Depth 126 mm Excluding DIN-Rail mounting device

3 Line

Add 10 mm for standard mounting device and EN50022 DIN-Rail

PENDING:

Pin Function Germanischer Lloyd 1 Output DC - Environmental category: D, EMC2

2 Output DC - Guidelines for the Performance of Type

3 Output DC + Approvals Chapter 2, Edition 2003 4 Output DC +

Low Voltage Directive 73/23/EEC and 93/68/EEC EMC Directive 89/336/EEC and 92/31/EEC and 93/68/EEC

Other Power Technics products

for Marine and Offshore Applications

PT502 125 W DIN-Rail AC/DC Power Supply

PT503 250 W DIN-Rail AC/DC Power Supply

AWG 24 - 12 PT504 500 W DIN-Rail AC/DC Power Supply

Solid 0,2 – 4 mm2 PT506 75 W DIN-Rail AC/DC Power Supply

Flexible 0,2 – 2,5 mm2 PT505 250 W DIN-Rail DC/DC Power Supply

PT510 DIN-Rail Redundancy Module

126.0mm

134

.0m

m

43.0mm

4321

ADJUSTDC OK

321

PT507 . 75W DIN-Rail AC/DC power supply for marine and offshore applications

Power Technics BV Tel : +(31) 76 503 83 50 e-mail : [email protected]

Nijverheidsweg 126 Fax : +(31) 76 501 20 38 web : www.powertechnics.nl 4879 AZ Etten-Leur The Netherlands Specifications subject to change without notice Rev. 4

Preliminary

Front view Side view

Pin Function Height 134 mm 1 Safety Ground Width 43 mm 2 Neutral Depth 126 mm Excluding DIN-Rail mounting device

3 Line

Add 10 mm for standard mounting device and EN50022 DIN-Rail

PENDING:

Pin Function Germanischer Lloyd 1 Output DC - Environmental category: D, EMC2

2 Output DC - Guidelines for the Performance of Type

3 Output DC + Approvals Chapter 2, Edition 2003 4 Output DC +

Low Voltage Directive 73/23/EEC and 93/68/EEC EMC Directive 89/336/EEC and 92/31/EEC and 93/68/EEC

Other Power Technics products

for Marine and Offshore Applications

PT502 125 W DIN-Rail AC/DC Power Supply

PT503 250 W DIN-Rail AC/DC Power Supply

AWG 24 - 12 PT504 500 W DIN-Rail AC/DC Power Supply

Solid 0,2 – 4 mm2 PT506 75 W DIN-Rail AC/DC Power Supply

Flexible 0,2 – 2,5 mm2 PT505 250 W DIN-Rail DC/DC Power Supply

PT510 DIN-Rail Redundancy Module

126.0mm

134

.0m

m

43.0mm

4321

ADJUSTDC OK

321

Front view Side view

GL