Address: first floor, No 27, Nezami St., Tavanir St ... · for create a balance between work and family life. It has moral value to improve satisfaction It has moral value to improve

Address: first floor, No 27, Nezami St., Tavanir St., Tehran, I.R.Iran, Pad Kish Energy Development Co., Postal Code: 1434843145

Tel. +98 (21) 41676000, fax: +98 (21) 41676129 www.topco.biz [email protected]

TECHNICALCATALOGUE

2 0 1 9V e r 1 . 0

About JPC

index:

7

12

22

26

76

42

98

OlefinChemical & Olefin Plants:

Polyolefin Plants:

Butadiene, Butene-1

HDPE

Polypropylene

LLDPE

ABS-Rubber

About JPCAbout JPC .................................................................... 7Vision, Mission, Values, Goals................................... 8-9JPC in the Global Markets........................................... 11

Olefin ProductsProducts Capacity of Olefin plant............................... 14Ethylene...................................................................... 15Propylene................................................................... 16Pyrolysis gasoline........................................................ 17C4 cut.......................................................................... 18Fuel oil........................................................................ 19Hydrogen.................................................................... 20Methane..................................................................... 21

BD - B1 ProductsButadiene................................................................... 24Butene-1..................................................................... 25

HDPE ProductsProduct s Capacity of HDPE plant.............................. 28HF4760(BL3)............................................................... 30HM8355(BL4) ............................................................. 32HM5010T2N (EX3) ..................................................... 34HMCRP 100 N(PE100)................................................. 36HMCRP 100 (Black)..................................................... 38HM9450F(EX5)............................................................ 40

LLDPE ProductsProducts Capacity of LLDPE plant................................ 44LL22502AA/22502KJ ................................................... 47LL22501AA/22501KJ ................................................... 48HPLL18XF5/N .............................................................. 50HD5000s ...................................................................... 52HD60505/UV ............................................................... 54HD60507/UV................................................................ 56CC52501...................................................................... 58CC52502...................................................................... 60CC52502SU.................................................................. 62HD52505/UV................................................................ 64HD52511/UV................................................................ 66HD52518..................................................................... 68LL32604UV................................................................... 70MD38504UV ................................................................ 72HD60511/UV................................................................ 74LL235F6 ....................................................................... 76LL235F7 ....................................................................... 78MD3510 ....................................................................... 80MD3520 ....................................................................... 82MD35504..................................................................... 84

Polypropylene ProductsHP525J ......................................................................... 96HP550J ......................................................................... 97HP510L ........................................................................ 98HP552R ........................................................................ 99HP564S ...................................................................... 100EP440G ...................................................................... 101EP440L ...................................................................... 102EP3130UV.................................................................. 103EP548R ...................................................................... 104EP548T ...................................................................... 105RP345S ...................................................................... 106RP120L ...................................................................... 107

ABS-Rubber ProductsF332 ........................................................................... 110E332 .......................................................................... 111L322.......................................................................... 112F232 ........................................................................... 113B432/E.......................................................................114B532/E....................................................................... 115B732/E....................................................................... 116D232/M3................................................................... 117C442.......................................................................... 118SOLT6302................................................................... 119SOLT161B ..................................................................120SOLT6306................................................................... 121SOLTB183.................................................................. 122InteneP30.................................................................. 123BR245........................................................................ 124BR277........................................................................ 125

Innovations in the products of JAM Petrochemical Company are shown with the symbol.

6 JAM Petrochemical CompanyTechnical Catalogue 2019

7JAM Petrochemical CompanyTechnical Catalogue2019

About JPCJAM Petrochemical Company (Public stock) has been founded in order to achieve country’s macro plans in petrochemical industry for the purpose of operation of south pars gas field with the registered No 32285, in 2000.This large industrial complex, with the total area of 77 hectares is located in Asaluyeh special economic zone, in the Boushehr province. JAM Petrochemical Company (JPC) after almost a decade of operation and including of Olefin, HDPE, LLDPE, Butadiene and Butene-1 production units, still is one of the largest Olefin producers all over the world, and also polymer based products in Iran.JPC is the most prominent complex in south Pars special economic zone by production and supply various grades of petrochemical products in domestic and global market and move forward on development and promotion is one of the important complexes of petrochemical industry in economic arena.


JAM Petrochemical Company intends to make twice its own production, by the year of 2021, in compare with of the year of 2016.

As a market-oriented company and as a leader in petrochemical industry and supplier of diversified products in olefin chain, JAM Petrochemical Company seeks to achieve maximum value through development of value chain and enhance permanent competitive advantages on an international scale. This company, is committed to meet the expectations of the stakeholders, safe and sustainable production, accepting social responsibilities and improve the environment based on valuable human capital and using unique position of Iran, as one of the largest olefin production complex in Iran and over the world.

Vision

Mission


1. Preserving and protecting of shareholders rights and other beneficiaries is one of company’s fundamental values.

2. Legalism, international and national laws administration which is related to mission of company is another fundamental value of company.

3. Making alignment and coordination between company goals and employees’ private goals for create a balance between work and family life. It has moral value to improve satisfaction of employees and their families.

4. Continuous excellence of the performance in all organizational aspects, increase quality and sustainability of products, increase customer satisfaction and also concern for human dignity is a value for JAM Petrochemical Company.

5. Human resource and capital efficiency and moral and spiritual and financial capital maintenance are of value in petrochemical Jam Company.

6. Development of learning culture, being innovative and creative, continuous improvement, group work, group participation, being knowledge-based, being responsible and having customer oriented strategy is sentimental values for JAM Petrochemical Company.

1. Increase production capacity through promotion of productivity and systems improvement.2. Perform project execution for development for the purpose of make completion of polymer

products value chain. 3. Increase the quality, production identical basket of goods and suitable innovative for the purpose

to increase benefit.

Values

Goals

OlefinProducts

Olefin Unit Under the license of Technip, with its annual capacity of producing 1,320,000 tons of ethylene and 306,000 tons of propylene as well as a total annual capacity of 2,359,000 tons of products, JPC Petrochemical Company’s olefin unit is considered as one of the largest olefin units both globally and nationwide. Olefin unit has been constructed with the help of modern technologies and its capacities have been determined by taking into consideration the global scale. 1. Compared to other similar units, unique characteristics of JPC Petrochemical olefin unit include its high production capacity and possibility of utilizing (flexible) dual purpose furnaces which allow this unit to make use of both liquid and gas feed. 2. Feed diversity, capacity to produce a wide range of products, and relationship with other important units, in the South Pars Zone, of gas and petrochemistry can be regarded as other strategic features of JPC’s olefin unit.Ethylene, propylene, Hydrogen, dry pyrolysis gasoline, furnace fuel oil (CFO) and C4 compounds.


Applications Nominal Capacity1000 T/YProducts

Polyethylenee, PVC1345Ethylene

Polypropylene305Propylene

Feed for downstream plant265C4cut

To Aromatic Plant216Pyrolysis gasoline

Feed for downstream plant38Fuel Oil

For hydrogenation1.5Hydrogen

Fuel 3.9Methane

2174.4Total

Products Specification of Olefin plant

Product data sheet

JAM Petrochemical CompanyTechnical Catalogue2019 13

SpecificationComponent

vol % min99.9Ethylene

ppm vol max1000Methane + Ethane

ppm vol max500Ethane

ppm vol max5Acetylene

ppm vol max10C3 & Higher

ppm vol max2Carbon Monoxide

ppm vol max5Carbon Dioxide

ppm vol max10Water

ppm vol max5Oxygen

ppm vol max10Hydrogen

ppm vol max100Nitrogen

ppm vol max10Oxygenated Compounds

ppm vol max1 Basic Nitrogen CompoundeCaloulated as NH3

mg/kg max2Total sulphur

ppm vol max0.5Methanol

ppm vol max0.2Total Combined Nitrogen

ppm vol max0.02COS

ppm vol max0.3Mercaptans

Olefin made via Techinp Tecnology

Ethylene Is a simple olefin, the chemical formula is C2H4 has a prominent role in the petrochemical industry. It is colorless flamable gas.

Product data sheet

JAM Petrochemical CompanyTechnical Catalogue 201914


Propylene Also called propane, a colorless, flamable, gaseous hydrocarbon, C3H6, obtained from low molecular weight constituents of petroleum.

SpecificationUnitComponentmin 99.8% volPropylene

max 0.2 %% volPropanemax 5ppm volHydrogenmax 1ppm volEthylenemax 1ppm volButenesmax 1ppm volPentenes

max 20ppm volNon-condensablesmax 20ppm volEthanemax 10ppm volButane-pentanesmax 1ppm volC6-C12 Hydrocarbonsmax 1ppm volAcetylenemax 1ppm volMethyl-acetylenemax 1ppm volPropadiene

max 10ppm volButadienemax 2ppm volOxygen

max 0.03ppm volCarbon Monoxidemax 2ppm volCarbon Dioxide

max 0.02ppm volCOSmax 1ppm wtTotal sulphurmax 5ppm volMethanolmax 5ppm volIsopropanolmax 2ppm wtWater

max 0.01ppm volArsinemax 0.01ppm volPhosphine

max 1ppm wtAmmoniamax 0.05ppm volCyclopentadiene

Product data sheet



Pyrolysisgasoline

Pyrolysis gasoline, is a naphtha-range product with a high aromatics content used either for gasoline blending or as a feed stock for aromatics plants.

Analysis MethodSpec.UnitSpecificationmax 50 wt%Aromaticsmax 30wt%Benzene.………wt%Toluene

ASTM D40520.8-0.84gr/cm3Density at 15.6CASTM D86max 225.cFBPASTM D86min 33.cIBP

ASTM D637840-65kpaR.V.Pmax 21wt%Paraffinesmax 21wt%Isoparaffinesmax 2wt%Naphtenes

max 20wt%OlefinsASTM D5453350mg/kgTotal Sulfur

max 50 mg/100mlGum Contentmax 30ppbLead Content

ASTM E203.………Water Content.………wt%Unknown

ASTM D86.………wt%ResidueASTM D86min 45.c%5RecoveryASTM D86.……….c10%RecoveryASTM D86.……….c20%RecoveryASTM D86.……….c30%RecoveryASTM D86.……….c40%RecoveryASTM D86.……… .c50%RecoveryASTM D86.……….c60%RecoveryASTM D86.……….c70%RecoveryASTM D86.……….c80%RecoveryASTM D86min 175.c90%RecoveryASTM D86.……….cRecovery

-16Color Sybolt

Product data sheet


C4 Cut produced in Ethylene production planets by steam cracking of naphtha. It is a mixture of C4 hydrocarbons mainly 1,3- butadiens, Iso Butene, Butane.


C4 Cut

SpecificationComponent45.1 %wt1,3-Butadiene0.12 %wtMethyl-Acetylene0.02 %wtPropadiene0.1 %wtPropylene

0.03 %wtPropane1.13 %wtVinyl-Acetylene19.2 %wti-Butene9.16 %wt1 Butene1.86 %wtCis2-Butene2.58 %wtTrans2-Butene3.94 %wti-Butane

16.56 %wtn-Butane0.06 %wtC5-diolefins0.1 %wtPentenes

0.02 %wtPentanes0.03 %wt2-methyl-butene

100.01 %wtTotal

Product data sheet



Fuel Oil Fuel oil product is a heavy hydrocarbon cut rich (poly) aromatic components.

ValueTest/Composition

>60°CFlash point

approx. >40 cP at 80°CViscosity

Product data sheet


In addition to the guaranteed hydrogen purity, exported hydrogen for use in polyethylene plant will be made available having a non contractual target value for CO content of 30 ppb vol.. This is not a design case. Only facilities have been provided to produce this quality.


Hydrogen

Composition (contractual)99.99 vol %H2

1 ppm vol maxCO + CO2

0.01 vol % maxCH4 + N2

1 ppm v maxC2H4

Product data sheet



Methane High pressure Methane is used by EO/EG plant

Compositionmin 93 % volMethanemax 0.5 % volCO/CO2

max 0.05 % volC2H6

max 20 mg/kgC3 and heaviermax 10 mg/kgMethanol andother Oxygenated organic

max 3 % volHydrogen2 mg/kg maxSulphur

max 5.0 ppm volAcetylene

BD, B1Products

BUTADIENEHaving been constructed under BASF license of Germany and assisted by LURGI’s basic engineering and Namvaran’s detail engineering, Butadiene Unit of JAM Petrochemical Company with its annual production capacity of 115,000 tons serves as a brilliant unit nationwide in terms of production, purity grade and product quality. This unit operates as one of JPC’s invaluable production units.

BUTENE-1JPC BUTENE-1 UNIT under AXENS license possessing and assisted by Nargan Co. an annual production capacity of 100,000 tons is honored to serve as the largest Butene production unit nationwide. Besides satisfying the needs of its downstream units in JPC Complex, this unit is also capable of supplying the needs of other polyolefin companies in the country. A major portion of the products generated by this unit is considered to be exported to foreign consumer countries.

Product data sheet


Butadiene 1,3-Butadiene is a simple diene with the formula C4H6 . It is an important industrial chemical used as a monomer in the production of synthetic rubber.Annual production 115,000 tons

Butadiene made via BASF Tecnology

Analysis MethodSpecificationUnitAnalysis

ASTM D 2593Min. 99.5wt %1,3 - Butadiene

ASTM D 2593Max. 100wt ppm1,2 - Butadiene

ASTM D 2593Max. 0.5wt %Total Butenes

ASTM D 2593Max. 60wt ppmTotal Acetylenes

BASF's method50-200wt ppmTBC

ASTM D 2426Max. 0.1wt %Dimer (VCH)

BASF's methodMax. 5wt ppmPeroxides

BASF's methodMax. 0.1wt %Non Volatile Residue

ASTM D 5453Max. 5wt ppmTotal SulfurPORTABLE TRACE OXYGEN

ANALYZERMax. 0.2mol % Oxygen in Vapor Phase

Product data sheet


Butene-1 is a linear alpha-olefin with the formula C4H8 and used as a co-monomer for the production of HDPE & LLDPE and manufacturing of polybutene.Annual production 100,000 tons

Butene-1

Butene-1 made via Axense Tecnology

Analysis MethodSpecificationUnitAnalysis

ASTM D 4424Min. 99.5wt %Butene-1

ASTM D 4424Max. 100wt ppmC6+

ASTM D 4424Max. 0.5wt %C4s (Butenes + Butanes)

ASTM D 4424Max. 500wt ppmEthylene

ASTM D 4424Max. 100wt ppmEthane

ASTM D 4424Max. 15wt ppmAcetylenes

ASTM D 4424Max. 20wt ppm1,3-Butadiene

ISO 6381-1981Max. 1wt ppmCarbon monoxide

ISO 6381-1981Max. 1wt ppmCarbon dioxide

ASTM D 2029Max. 15wt ppmWater

ASTM D 5453Max. 1wt ppmTotal Sulphur

HDPEProducts

High Density Polyethylene Unit Having been established under the license of LYONDELL BASELL Co. and assisted by KRUPP UHDE’s basic engineering, JPC HDPE Unit producing 300,000 tons of products a year is one of the largest polymer units in Iran. In addition to its capability of producing 26 main grades, this unit produces black, oranage, yellow, blue and normal grades. These capabilities of JPC HDPE Unit are unique nationwide and rare in the world.JPC HDPE Unit is the first producer of (pipe) CRP 100 black in Iran.The grades produced by JPC HDPE Unit can be classified as follows:BLOW MOLDINGPIPE PE100/PE80 (NATURAL/COLOR)- FILMINJECTION MOLDINGSTRETCHED TAPE- MONOFILAMENTIn comparison with other units, some unique features of JPC HDPE Unit are:1. Highly diverse range of products owing to the diverse grades produced;2. A high production capacity3. Capability of producing colored grades and possessing two extruder and packaging lines.


DensityMFR(190°C/5 kg)Property

Grades g/cm3(g/10 min).UnitISO 1183D 1238ASTM Method

17066Internal Method1. INJECTION MOLDING

0.960±0.002

0.954±0.002

23±3

11±2

• For transport and stacking bottle crates,particularty bottle creates

• For thick walled highly stressed transport container,e.g. refuse bins and fish crates

HC 7260 (I3/UV)

HD 7255 (I4/UV)

2. SMALL BLOW MOLDING

0.944±0.002

0.954±0.002

0.959±0.002

1.1±0.3

1.2±0.3

1.5±0.3

• For disinfectant bottles up to 2 liters, tubes for cosmetics, containers up to 10 liters and petrol cans up to 5 liters

• For container with capacites ranging from a few ml up to 10liters, alsofor production of sheets for thermoforming

• For hollow articles where high stress cracking resistance is not demanded,such as bottles and caisters up to 10 liters,e.g. for fabric softeners

HF 4750

HF4760 (BL3)

HH 4765

3. LARGE BLOW MOLDING

0.951±0.0020.35±0.06• General-purpose grade for large containersHM8355 (BL4)

4. STRETCHED TAPE (RAFFIA)

0.944±0.002

0.944±0.002

1.8±0.3

1.8±0.3

• Stretched films and tapes for production of high-strength knitted and woven

• Tapes to be used for agricultural packagings and as protective cover

HF 7740 F

HF 7740 F2

5. MONOFILAMENT

0.956±0.0020.956±0.002

2.5±0.33.3±0.3

• Production of monofilaments with high tensile strength• Monofilaments for fishing notes , geo textiles and civil

engineering

HF 7750 MHF 7750 M2

Available

Available

Products Specification of HDPE plant


DensityMFR(190°C/5kg)Property

Grades g/cm3(g/10 min).UnitISO 1183D 1238ASTM Method

17066Internal Method

6. CABLE

0.946±0.0023.5±0.5cable insulationHF 4750 K

7. PIPE(NATURAL/COLOR)

0.945±0.002

0.944±0.002

0.954±0.002

0.948±0.002

0.957±0.002

0.948±0.002

0.949±0.002

0.45±0.06

0.43±0.03

0.43±0.03

0.22±0.03

0.22±0.02

0.22±0.02

0.22±0.02

• Pressure pipes, e.g. drinking-water and gas pipes,waste pipes and sewer pipes,their fittings and also sheets(UV stabilization and pigments during processing)

• High-quality PE 80 pressure pipes for gas and water transportation(UV stabilization and pigments during processing)

• High-quality PE 80 pressure pipes for gas and water transportation(UV stabilization and pigments during processing)

• Top quality PE 100 pressure pipes for gas and water transportation at higher pressures or with thinner walls as PE 80 (UV stabilization and/or pigments during precessing)




HM 5010 T2N (EX3)

HM 5010 T3 N

HM 5010 T3 Black

HM CRP100N(PE100)

HM CRP 100 (Black)

HM CRP 100 Blue

HM CRP 100 O/Y

8. FILM

0.956±0.002

0.949±0.002

0.950±0.002

0.957±0.002

0.944±0.002

0.28±0.05

0.28±0.05

0.22±0.05

0.22±0.05

0.18±0.03

• For blown films with paperlike quality,suitable for counter bags,carrier bags and wrapping films,excellent processing


• For blown films with paperlike quality,suitable for counter bags,carrier bags and wrapping films,excellent processing and sealability



HM 9455 F

HM 9450 F (EX5)

HM 9450 F1

HM 9455 F1

HM 9445 HT

Available

Available

Available

Available

Products Specification of HDPE plant

28

Product data sheet


HDPE: HF-4760(BL3) MFR 190/5: 0.9-1.5

CharacteristicProperties

• High density and Stiffness, good flowability and impact Strength and

good Stress Cracking resistance.

Main Applications

• For container with capacities

ranging from a few ml up to 10 liters,

also for production of sheets for

thermoforming.

Additives

• Antioxidant/Process

stabilizer

• Lubricant/ acid scavenger

HDPE made via Hostalen Process

HF4760(BL3)

Material properties (This data are typical values and are not to be construed as product specifications.)

Test MethodTypical ValueUnitResin PropertiesISO 113323(g/10 min)Melt Index(21.6)ISO 11331.2(g/10 min)Melt Index(5)

19 FRR (21.6/5)ISO 11830.954g/cm³Density

Test MethodTypical ValueUnitMoulded PropertiesISO 179/ 1 eA9mJ/mm²Notched Impact @ 23 °C

Density: 0.952-0.956 g/cm3

HF-4760 (BL3) is a blow molding grade resin with high density polyethylene with 1-Butene as co monomer which is manufactured by the suspension polymerization of ethylene monomer. Stiffness, good ESCR are it’s spetial properties. High rigidity and good flowablity which made it proper for usage in bottles and small blow molding goods.

29


Shear-Viscosity @ 190 °C

- On compression moulded according to ASTM D1928CProcessing ConditionsRecommended barrel tempratures range between 190 °C and 280 °C.

The above values wereCalculated from data for 100 µm producedon a 75mm Barrnageextruder with 190°C melt tem-perature using a 2:1 blow ratio and a gap die of 3.0 mm.

Handling and Health SafetyMolten polymers could be injured skin or eye so safety

glasses and appropriate gloves are suggested to prevent

possible thermal injuries. Also appropriate ventilation is

suggested in working by melt polymer.

Accumulation of fines or dust particles that are in this grade

is not suitable because of explosion hazard probability.

So adequated filters and grounding exists at all time are

recommended.

Storage Polyethylene products (in pelletised or powder form) should not be stored in direct sunshine and/or heat radiation. Ultraviolet cause a change in the material properties.The Storage area should be dry and preferably don’t exceed 50 °C. it is advisable to process PE resine within 6 month after delivery. JPC would not ressponsible about quality diminishing such as color change, bad smell or ets which caused by bad storage conditions. It is better to process PE resin within 6 months after delivery.

packagingJam Polymers Polyolefin resins are supplied in Pellet form packed in 25kg bags. Alternative packaging modes are avalable for selected grades.

30

Product data sheet


HM-8355(BL4) is a Blow molding grade resin which is manufactured by suspension polymerization of ethylene monomer. HM-8355 (BL4) is a bi-modal high density polyethylene with Butene-1 as co monomer with general purpose of large container.

Density: 0.949-0.953 g/cm3HDPE: HM-8355(BL4) MFR 190/5: 0.29-0.41


• High molar mass, easily

processable high stiffness Strength,

good stress Cracking resistance and

very good molding surface finish.

Main Applications

• General purpose grade for large

container up to 100 liters.

Additives


stabilizer

• Lubricant/ acid scavenger


HM8355(BL4)


Test MethodTypical ValueUnitResin PropertiesISO 11339.5(g/10 min)Melt Index(21.6)ISO 11330.35(g/10 min)Melt Index(5)


110%Swell RatioTest MethodTypical ValueUnitMoulded PropertiesISO 179/ 1 eA10mJ/mm²Notched Impact @ 23 °C

31












recommended.

Storage Polyethylene products (in pelletised or powder form) should not be stored in direct sunshine and/or heat radiation. Ultraviolet cause a change in the material properties.The Storage area should be dry and preferably don't exceed 50 °C. it is advisable to process PE resine within 6 month after delivery. JPC would not ressponsible about quality diminishing such as color change, bad smell or ets which caused by bad storage conditions. It is better to process PE resin within 6 months after delivery.


32

Product data sheet


HM-5010T2N (EX3) is a pipe grade resin which is manufactured by suspension polymerization of ethylene monomer. HM-5010T2N (EX3) is a bi-model high density polyethylene with 1-Butene as co monomer.

Density: 0.943-0.947 g/cm3HDPE: HM-5010T2N (EX3) MFR 190/5: 0.39-0.51


• Tough and rigid pipe resin.

Main Applications

• Pressure pipes, e.g. drinking-water and gas pipes, waste pipes and sewer pipes, their fittings and also sheets (UV stabilization and pigments during processing)

Additives


stabilizer

• Lubricant (processing aid)

/acid scavenger


HM5010T2N(EX3)


Test MethodTypical ValueUnitResin PropertiesISO 113312(g/10 min)Melt Index (21.6)ISO 11330.45(g/10 min)Melt Index (5)


Test MethodTypical ValueUnitMoulded PropertiesISO 179/ 1 eA12mJ/mm²Notched Impact @ 23 °CTest MethodTypical ValueUnitMechanical Properties

ISO 1167(4.0 N/mm²) 1000hHydrostatic Strength (80 ºC)

33










recommended.





34

Product data sheet


HM-CRP100N (PE100) is a natural pipe grade resin which is manufactured by suspension polymerization of ethylen monomer, HM-CRP100N )PE100) is a bi-model high density polyethylene with 1-Butene as co monomer.

Density: 0.946-0.950 g/cm3HDPE: HMCRP 100 N (PE100) MFR 190/5: 0.19-0.25


• Natural PE100 pipe resin.

Main Applications

• Top quality PE100 pressure

• Pipes for gas and water

transportaion at higher pressures

or with thinner walls as PE80 (UV

stabilization and/ or pigments during

precessing)

Additives

• Antioxidant/Process stabilizer

• Lubricant (processing aid)/ acid

scavenger


HMCRP 100N(PE100)


- Test specimen from compression moulded sheet at 23°C.- FRR values are statistical and calculated by dividing MFR values.- Notch Impact Test specimen from compressed moulded sheet 23°C and The data quoted are average values .

ASTM MethodUnitTypical ValueTest/CompositionISO1183g/ml30.948Density

28FRR 21.6/5ISO1167h5000 (4.5N/mm2)Hydrostatic Strength (80°c)ISO1133(g/10 min)6.2MFR190°/21.6ISO1133(g/10 min)0.22MFR190°/5

ISO179/1eAmJ/mm224Notched Impact (23°c)

35










recommended.





PE100-N

1.00E+04

1.00E+05

1.00E+06

1.00E+02

1.00E+03

1.00E+04

1.00E+05

1.00E+00 1.00E+01 1.00E+02 1.00E+031.00E+04

TAU

ap 1

[Pa

];

ETAa

p 1

[Pa*

s];

ETAap 1 [Pa*s]; Ser.: 1; TAUap 1 [Pa]; Ser.: 1;

36

Product data sheet


HM-CRP100 Black is a black pipe grade resin (PE100) which is manufactured by suspension polymerization of ethylene monomer. HM-CRP100 Blue is a bi-model high density polyethylene with 1-Butene as co monomer.

Density: 0.955-0.959 g/cm3HDPE: HM CRP 100 Black(PE100 Black) MFR 190/5: 0.20-0.24


• Black PE100 resin

Main Applications

• Top quality PE100 pressure pipes for gas and water transportation at higher pressures or with thinner walls as PE80

Additives


• Lubricant (processing aid)/

acid scavenger

• Carton Black


HMCRP 100 (Black)


- Test specimen from compression moulded sheet at 23°C.- FRR values are statistical and calculated by dividing MFR values- Test specimen from compressed moulded sheet 23 C sheet 23 ºC - The data quoted are average values - The data quoted are average values

ASTM MethodUnitTypical ValueTest/CompositionISO1183g/cm30.957Density

28FRR 21.6/5ISO1167h5000 (4.5N/mm2)Hydrostatic Strength (80°c)ISO1133(g/10 min)6.2MFR190°/21.6ISO1133(g/10 min)0.22MFR190°/5

ISO179/1eAmJ/mm224Notched Impact (23°c)

37










recommended.

Storage Polyethylene products (in pelletised or powder form) should not be stored in direct sunshine and/or heat radiation. Ultraviolet cause a change in the material properties.The Storage area should be dry and preferably don't exceed 50 °C. Under cool, dry, dark conditions Jam Polymers polyolefin resins are expected to maintain the original material and processing properties for at least 18 month. JPC would not ressponsible about quality diminishing such as color change, bad smell or ets which caused by bad storage conditions. It is better to process PE resin within 6 months after delivery.




PE-100-B

1.00E+04

1.00E+05

1.00E+06

1.00E+02

1.00E+03

1.00E+04

1.00E+05

1.00E+00 1.00E+01 1.00E+02 1.00E+031.00E+04

TAU

ap 1

[Pa

];

ETAa

p 1

[Pa*

s];


38

Product data sheet


HM-9450F (EX5) is blown film grade resin which is manufactured by suspension polymerization of ethylene monomer. HM-9450F (EX5) is a bi-model high density polyethylene with 1-Butene as co monomer.

- Test specimen from compression moulded sheet at 23°C.- FRR values are statistical and calculated by dividing MFR values.- Notch Impact Test specimen from compressed moulded sheet 23°C and The data quoted are average values

Density: 0.947-0.951 g/cm3HDPE: HM9450F (EX5) MFR 190/5: 0.23-0.33


• High molar mass film grade, good

stiffness and tenacity

Main Applications

• For blown films with paperlike

quality, sutable for counter bags,

carrier bags and wrapping films,

excellent processing.

Additives


• Lubricant (processing aid)/ acid

scavenge


HM9450F(EX5)


Test/Composition Typical Value Unit MethodDensity 0.949 g/cm3 ISO1183Fish Eye Note ≤3 note InternalFRR 21.6/5 29MFR 190°/21.6 8.0 g/10min ISO1133MFR190°/5 0.28 g/10min ISO1133

39










recommended.



1.00E+04

1.00E+05

1.00E+06

1.00E+01

1.00E+02

1.00E+03

1.00E+04

1.00E+05

1.00E+00 1.00E+01 1.00E+02 1.00E+03 1.00E+04 1.00E+05

TAU

1 [P

a*s]

ETA

1 [P

a*s]

GAMMA 1 [1/s]

LLDPEProducts

Low Density Polyethylene Unit Under the license of BASELL, JAM Petrochemical Company’s LLDPE Unit has been designed and established with TECNIMONT’s basic engineering and SPHERILENE technology. Able to produce 300,000 tons of products per year, JPC (LLDPE) Unit is one of the greatest polymer production units in Iran which enjoys the capacity of producing both high density and linear low density polyethylene and the unit can produce more than 54 different grades for such varying applications as the following:FILM- INJECTION MOLDING- STRETCHED TAPE- MONOFILAMENT ROTOMOLDING- YARN- CAPS & CLOSURESThe products made by this unit can be utilized in various industries such as packaging industries, home appliances manufacture industries, textile industry, agricultural industry, and automobile manufacture industries.


Products Specification of LLDPE plant

DensityMFR

(190°C/2.16 kg)

Property

Grades g/l(g/10 min).UnitD 1505D 1238ASTM Method1700417066Internal Method

1- LLDPE Butene922 ± 2922 ± 2918 ± 2923 ± 1923 ± 1918 ± 2

916 - 919

0.6 ± 0.10.70 ± 0.10.95 ± 0.11.80 ± 0.20.95 ± 0.12.00 ± 0.23.00 ± 0.3

• Heavy duty Films, General Purpose• Lamination• Liner• General Purpose• High Stiffness• Cast & general Purpose• Cast

LL235F6LL235F71650122502/ AA/ 22502 KJ22501/ AA/ 22501 KJ16502165032- Terpolymer - HP-LLDPE SPECIALITY PRODUCTS

914 ± 2914 ± 2

914 - 917914 - 917914 ± 2915 ± 1912 ± 1910 ± 1921 ± 1920 ± 2

0.60 ± 0.100.60 ± 0.100.75 ± 0.100.90 ± 0.100.95 ± 0.100.95 ± 0.102.00 ± 0.202.20 ± 0.202.50 ± 0.200.50 ± 0.10

• High Performance• Shrink• Easy Processability• Lamination• Superbutene• High Stiffness• General Purpose• Stretch cast• Bread bags• High performance

12XF612HF614ZF814XF912X0114X0111X0209X0220X0218XF5 N

3- Quattropolymer'' HP-LLDPE SPECIALTTY PRODUCTS (HP HEXENE TYPE)

918 - 921918 - 921914 ± 2916 ± 1

911 - 914915 ± 1911 ± 1

0.30 ± 0.050.55 ± 0.100.60 ± 0.100.60 ± 0.100.60 ± 0.101.00 ± 0.102.20 ± 0.20

• Shrink film, high perform.• High Stiffness/ Shrink• Liner• Heavy duty• Lamination high clarity• Thin film• High Pre-Stretch cast

18YF318YF512YF615YF611YF614Y0110Y02

4- VLDPE (butene) film grades SPECLALITY GRADES

911 ± 1911 ± 1

2.50 ± 0.302.50 ± 0.30

• Lamination• Cast- Co-extrusion(*)

1050110502(*) This product is used as adhesive layer in a multilayer co-extruded film.

Available

Available

Available

Available

Available




DensityMFR

(190°C/2.16 kg)

Property


5- HP-VLDPE SPECIALITY PRODUCTS

902 ± 1903 ± 1

0.90 ± 0.101.80 ± 0.20

• Co-extrusion• Geomembranes, Bumpers, Soft Nets

01X0102X026- HDPE - Medium MWD - Stretched

952 ± 2942 ± 1953 ± 1950 ± 2

0.80 ± 0.100.50 ± 0.100.70 ± 0.101.00 ± 0.10

• Monofilament• Raffia (Textile grade)• Monofilament, high tenacity• Monofilament

Jamlene HD-5000s424F5534F750401

7- HP-HDPE (@) SPECIALITY PRODUCTS

936 ± 1943 ± 1941 ± 1

0.60 ± 0.101.00 ± 0.101.20 ± 0.10

• Raffia for ropes• Monofilament• Cast flat yarn (Raffia)

36XF643X0141X01

8- HDPE Narrow MWD - Homopolymer injection moulding grades

958 ± 2958 ± 2958 ± 2958 ± 2958 ± 2

5.50 ± 1.007.50 ± 1.0011.00 ± 2.0018.00 ± 2.0035.00 ± 5.00

• Crates• Crates• Houseware• Fast cycle• Thin walled

60505 / 60505 UV60507 / 60507 UV60511 / 60511 UV6051860535

9- HDPE Narrow MWD - Copolymer injection moulding grades

952 ± 2952 ± 2952 ± 2952 ± 2952 ± 2952 ± 2952 ± 2

0.90 ± 0.102.10 ± 0.202.10 ± 0.205.00 ± 1.0011.00 ± 2.0018.00 ± 2.0028.00 ± 4.00

• Caps and closures (CSD)• Caps and closures (Mineral water, CSD)• Caps and closures (CSD)• Containers• Houseware• Houseware, High fluidity• Caps, Thin walled

CC 52501CC 52502CC 52502SU52505 / 52505 UV52511 / 52611 UV5251852528

10- LLDPE (butene) Injection moulding grades

922 ± 1922 ± 1925 ± 1926 ± 1

5.00 ± 1.0016.00 ± 2.0025.00 ± 3.0060.00 ± 5.00

• General purpose• General purpose• Lids• Fast Cycle

20505205162552526560

Available

Available

Available

Available

Available

Available

Available

Available

Available

Available



DensityMFR(190°C/2.16 kg)Property


11- LLDPE (butene) Extrusion coating

923 ± 17.00 ± 1.00• Extrusion coating23507

12- LLDPE Rotomoulding

932 ± 1930 ± 1938 ± 2932 ± 2935 ± 1

4.00 ±1.005.00 ± 1.004.00 ± 1.005.00 ± 1.004.5 ± 1.00

• Rotomoulding, high-ESCR• Rotomoulding, high-ESCR• Rotomoulding, high-ESCR• Rotomoulding, high-ESCR• Rotomoulding, high-ESCR

32604 UV30505 UV38504 UV32505 UVMD35504

13- HP LLDPE SPECIALTTY PRODUCTS

930 ± 14.00 ± 1.00• Rotomoutding & Stiff Cast30Y04

14- BWMD HDPE for Blow moulding

952952952

0.120.250.25

• Blow moulding containers, high impact• Blow moulding small containers, high ESCR• Blow moulding small containers

526F1BX(*)

526F2BX524F2(*)

15- BWMD HDPE for pipes

9480.2(1)• Pipes486H2(*)

16- BWMD HDPE for Blown film

952948952948

0.15(1)

0.25(1)

0.15(1)

0.25(1)

• Blow film, high Stiffness• Blow film, high mechanicals• Blow film, high Stiffness• Blow film, general purposes

526H1(*)

486H2(*)

524H1FX(*)

484H2(*)

17- Miscellaneous

935 ± 1935 ± 1

0.4 ± 0.10.6 ± 0.1

• Tapes and Films• Tapes and Films

MD3510MD3520

(*) Grade under final development, to be Industrialised.

(1) Melt Flow rate (190° C/5kg).

Available

Available

Available

Available

Available


Product data sheet


22502 is a LLDPE blown film grade designed for applications requiring ease of processing and good optical properties even at low extrusion temperature. This resin is well suited for blending with LDPE and for general purpose uses, including agricultural applications.

Density: 0.922-0.924LLDPE: 22502AA/22502KJ MFI: 1.6-2


• ease of processing• good optical properties• low extrusion temperature• suited for blending with LDPE

Main Applications

• Blown film grade• General purpose• agricultural applications.

LL22502AALL22502KJ


LLDPE made via Spherilene Gas-Phase Technology

ASTM MethodTypical ValueUnitResin PropertiesD12381.80(g/10 min)Melt Index (190°C/ 2.16Kg)D15050.9220g/mlDensity

Film properties @D170967(g)Dart ImpactD1922127/332MD/TD(g)Elmendorf TearD88212/12MD/TD(MPa)Tensile Strength at yieldD88237/32MD/TD(MPa)Tensile Strength at breakD882783/888MD/TD(%)Ultimate elongation

D100348(%)HazeD245710Gloss 45°

@ 25 micron film obtained on Collin 25, B.u.R. 2.5: 1, Temp. profile 155 190°C.Recommended processing conditions

190-230(°C)Melt Temperature2.0-3.0Blow up ratio2.0-2.5(mm)Die Gap15-150(micron)Thickness

Additives

• 22502AA:•Thermal Antioxidant (Process Stabilizer)• Catalyst neutralizer (acid scavenger, lubricant)• 22502KJ:•Thermal Antioxidant (Process Stabilizer)• Antiblocking Agent• Slip Agent• Catalyst neutralizer (acid scavenger, lubricant)

46

Product data sheet


22501 is a LLDPE blown film grade designed for applications requiring good optical properties even at low extrusion temperature. This resin combines ease of processing with low gels and it is well suited for blending with LDPE and for general purpose applications.

Density: 0.922-0.924 LLDPE: 22501AA/22501KJ MFI: 0.85-1.05


• High stiffness• good optical properties• low extrusion temperature• ease of processing• low gels• suited for blending with LDPE

Main Applications

• Blown film grade• General Purpose opplications

Additives

• 22501AA:•Thermal Antioxidant (Process Stabilizer)• Catalyst neutralizer (acid scavenger, lubricant)• 22501KJ:•Thermal Antioxidant (Process Stabilizer)• Antiblocking Agent• Slip Agent• Catalyst neutralizer (acid scavenger, lubricant)

LL22501AALL22501KJ


LLDPE made via Spherilene Gas-Phase Technology


Film properties @D170970(g)Dart ImpactD1922105/436MD/TD(g)Elmendorf TearD88211/12MD/TD(MPa)Tensile Strength at yieldD88241/31MD/TD(MPa)Tensile Strength at breakD882648/780MD/TD(%)Ultimate elongation

D100348(%)HazeD245710Gloss 45°

@ 25 micron film obtained on Collin 25, B.u.R. 2.5: 1, Temp. profile 155 190°C.Recommended processing conditions

190-230(°C)Melt Temperature2.0-3.0Blow up ratio2.0-2.5(mm)Die Gap15-150(micron)Thickness

47












recommended.



48

Product data sheet


HP-LL18XF5 N is a termopolymer of ethylene, propylene and butene-1 for high Strength application especially heavy duty shipping sacks, ice bag, frozen food bags, potato bags and agriculture films which have good sealability and excellent puncture resistance. Goods produced from this grade have outstanding toughness, excellent puncture resistance, good heat sealing behavior and excellent machinability on conversion lines. HP-LLDPE's process is easier than conventional LLDPEs and have low gel. HP-LL18XF5 N is a grade without slip additives.

Density: 0.918-0.922HP-LLDPE: HP-LL18XF5N MFI: 0.4-0.6


• Exellent punctuer resistance.

• Exellent machinability on conver-

sion lines.

Main Applications

• T-bags and other bags, Food Packag-

ing for frozen products, Agricultural

film, Heat seal film, Food Packaging

Additives

•Thermal Antioxidant (Process Stabilizer)• Catalyst neutralizer (acid scavenger, lubricant)• Antiblocking Agent

HPLL18XF5N


Test MethodTypical Value UnitResin PropertiesD12380.5 (g/10 min)Melt Index (190°C/ 2.16Kg)D15050.918 g/cm³Density

Film Properties @ D 1709125 g Dart ImpactD1525127 °CVicat Softening PointD638 11/10(MD/TD)MpaTensile Strength at YieldD63840/35(MD/TD)MpaTensile Strength at BreakD638600/750(MD/TD)% Ultimate Elongation

D1922240/400(MD/TD)gElmendorf TearD100330 %HazeD245725 Gloss 45°

@ on 25 micron film obtained on Collin 25, B.u.R 2.5: 1, Temp. profile 155 190°C: melt 200°C

HP-LLDPE made via Spherilene Gas-Phase Technology

49











recommended.



50

Product data sheet


Jamlene: HD5000S

Typical Applications

• Fishing net, Rope, Agricultural net, Tar-

paulin, Woven sack.

HDPE for Monofilament

HD5000S

Resin Properties Unit Value Test MethodMelt Index g/10 min 0.8 D1238Density g/cm³ 0.954 D1505Thermal Properties Unit Value Test MethodVicat Softening Point °C 125 D1525Molded Properties Unit Value Test MethodFlectural Modulus Mpa 1100 D790Tensile Strength at Yield Mpa 24 D790Tensile Strength at Break Mpa 39 D638H.D.T °C 75 D648Notched Izod Impact @ 23 °C J/m 400 D256/A

- On compression molded according to ASTM D1928C Processing Conditions Recommended barrel tempratures range is between 160 °C and 190 °C

Density: 0.950 - 0.954 MFI: 0.7 - 0.9

HD-5000S is a HDPE grade specially designed for monofilament applications, which combines good processability with high tenacity. This grade has good balance of mechanical strength and high production rates. HD-5000S is also well suited for multiply applications, like ropes and stretched filaments.


good processability with high

tenacity, good balance of

mechanical strength and high

production rates

Additives

Antioxidants/Acid scavengerAntiblock/Processing aid

51










recommended.



HD-5000S

1.00E+04

1.00E+05

1.00E+06

1.00E+02

1.00E+03

1.00E+04

1.00E+00 1.00E+01 1.00E+02 1.00E+03

1.00E+04

TAU

ap 1

[Pa

];

ETAa

p 1

[Pa*

s];


52

Product data sheet


60505 is a HDPE injection molding grade which combines high stiffness with good physical properties.This resin is well suited for crates and toys applications.

Density: 0.956-0.960HDPE: 60505/60505UV MFI: 4.5-6.5


• High stiffness with good physical properties.

Main Applications

• injection molding grade

• Crates

• toys applications

Additives• 60505:•Thermal Antioxidant (Process Stabilizer)• Catalyst neutralizer (acid scavenger, lubricant)• 60505UV:• Catalyst neutralizer (acid scavenger, lubricant)• UV Stabilizer•Thermal Antioxidant

(Process Stabilizer)

HD60505HD60505UV


HDPE made via Spherilene Gas-Phase Technology


Physical properties @D7901460(MPa)Flexural modulus

D256/A30(J/m)Notched Izod impact at 23°CD1525125(°C)Vicat softening point

@ on compression moulded specimen obtained according to ASTM D 1928°CFabrication conditions for injection mouldingRecommended barrel temperatures range between 190 and 280°C

53










recommended.



HD-60505

1.00E+04

1.00E+05

1.00E+06

1.00E+02

1.00E+03

1.00E+04

1.00E+00 1.00E+01 1.00E+02 1.00E+031.00E+04

TAU

ap 1

[Pa

];

ETAa

p 1

[Pa*

s];

time


54

Product data sheet


60507 is a HDPE homopolymer which is manufactured in gas phase process for injection molding grade which combines good flowability with balanced physical properties. This resin is well suited for general purpose application requiring high stiffness.

Density: 0.956-0.960HDPE: HD-60507/HD-60507UV MFI: 6.5-8.5


• Good flowability with balanced

phisycal properties.

Main Applications

• Crates

Injection molding grade

Additives

• HD-60507:•Thermal Antioxidant (Process Stabilizer)• Catalyst neutralizer (acid scavenger, lubricant)• HD-60507UV:•Thermal Antioxidant (Process Stabilizer)• Catalyst neutralizer (acid scavenger, lubricant)• UV Stabilizer

HD60507HD60507UV



Test MethodTypical ValueUnitResin PropertiesD12387.5(g/10 min)Melt Index (190°C/ 2.16Kg)D15050.958g/mlDensity

Test MethodTypical ValueUnit Resin Properties @D1525126.5(°C)Vicat Softening Point

Test MethodTypical ValueUnitMoulded Properties @D7901450(MPa)Flexural Modulus

D256/A24(J/m)Notched Izod Impact @ 23 °C

55










recommended.



HD-60507

1.00E+03

1.00E+04

1.00E+05

1.00E+06

1.00E+02

1.00E+03

1.00E+04

1.00E+00 1.00E+01 1.00E+02 1.00E+031.00E+04

TAU

ap 1

[Pa

];

ETAa

p 1

[Pa*

s];


56

Product data sheet


HDPE: CC52501


• Caps and closures for beverage bottles of

sparkling water, hot-filled and carbonated

soft drinks.

Caps and closures (CSD)

CC52501


CC52501 is a Narrow MWD HDPE specially designed for beverage bottles of sparkling water, hot-filled and carbonated soft drinks. This grade has excellent organoleptic properties which prevent unpleasant odor and taste from cap or closure to transfer to water. It has good gas permeability characteristics, superior processability and excellent mechanical strength. HDPE CC52501 does not contain slip agent.



Narrow MWD HDPE, excellent

environmental stress crack

resistance and organoleptic

property, good gas permeability

characteristics

Additives

Antioxidants/Acid scavenger

Density: 0.950 - 0.954 MFI: 0.8 - 1.0

57


Storage and HandlingPolyethylene products (in pelletized or

powder form) should not be stored in

direct sunshine and/or heat radiation. The

Storage area should be dry and preferably

don’t exceed 50 °C. JPC would not

responsible about quality diminishing such

as color change, bad smell or est. which

caused by bad storage conditions. It is

better to process PE resin within 6 months

after delivery.

The technical information sug-gested uses and application pre-sented are belived to be accurated and reliable, however JPC makes no warranties either express or implied concerning the information herein or the use of our materials.

58

Product data sheet


HDPE: CC52502


• Caps and closures for mineral water bot-

tles,Caps for sparkling water and carbonat-

ed soft drinks, beverage caps.

Caps and closures (Mineral water, CSD)

CC52502


CC52502 is a Narrow MWD HDPE specially designed for mineral water bottles and beverage caps. This grade has excellent organoleptic properties which prevent unpleasant odor and taste from cap or closure to transfer to water. It has good gas permeability characteristics, superior processability and excellent mechanical strength. HDPE CC52502 does not contain slip agent.




organoleptic property, superior

processability and excellent

mechanical strength, good gas

permeability characteristics

Additives


Density: 0.950 - 0.954 MFI: 1.9 - 2.3

59











after delivery.


60

Product data sheet


HDPE: CC52501


• Caps and closures for mineral water

bottles, Caps for sparkling water and car-

bonated soft drinks, beverage caps.

Caps and closures (CSD)

CC52502SU


CC52502 is a Narrow MWD HDPE specially designed for mineral water bottles and beverage caps. This grade has excellent organoleptic properties which prevent unpleasant odor and taste from cap or closure to transfer to water. It has good gas permeability characteristics, superior processability and excellent mechanical strength. HDPE CC52502SU does contain slip agent and stabilized against UV light.




organoleptic property, superior

processability and excellent

mechanical strength, good gas

permeability characteristics

Additives


UV stabilizer/Slip agent

Density: 0.952 - 0.954 MFI: 1.9 - 2.3

61











after delivery.


62

Product data sheet


52505 is a HDPE copolymer which is manufactured in gas phase process. This grade is an injection molding grade for applications requiring a good physical property even at low temperatures, like pails, containers and technical moldings.

Density: 0.950-0.954HDPE: 52505/52505UV MFI: 4-6


• Good physical property even at

low temperatures.

Main Applications

• Containers.

HD52505HD52505UV


Additives

HD-52505:•Thermal Antioxidant (Process Stabilizer)• Catalyst neutralizer (acid scavenger, lubricant)HD-52505 UV:•Thermal Antioxidant (Process Stabilizer)• Antiblocking Agent• Catalyst neutralizer (acid scavenger, lubricant)• UV Stabilizer


Test MethodTypical ValueUnitResin PropertiesD12385(g/10 min)Melt Index (190°C/ 2.16Kg)D15050.952g/mlDensity

Test MethodTypical ValueUnit Thermal Properties @D1525124(°C)Vicat Softening Point

Test MethodTypical ValueUnitMoulded Properties @D7901200(MPa)Flexural ModulusD63827(MPa)Tensile Strength at yieldD63813(MPa)Tensile Strength at breakD64867(°C)H.D.T

D256/A29(J/m)Notched Izod Impact @ 23 °C

63



@ On compression moulded according to ASTM D1928CProcessing Conditions:Recommended barrel tempratures range between 190 °C and 280 °C.









recommended.



64

Product data sheet


52511 is a HDPE copolymer injection molding grade for applications requiring a good balance between physical properties and flowability, like housewares and toys.



• Good balance between physical properties and flowability,

Main Applications


• Houseware

HD52511HD52511UV


Additives

52511:•Thermal Antioxidant (Process Stabilizer)• Catalyst neutralizer (acid scavenger, lubricant)52511 UV:•Thermal Antioxidant (Process Stabilizer)• Antiblocking Agent• Catalyst neutralizer (acid scavenger, lubricant)• UV Stabilizer


ASTM MethodTypical ValueUnitResin PropertiesD123811(g/10 min)Melt Index (190°C/ 2.16Kg)D15050.9520g/mlDensity




65


Shear-Viscosity @ T190 °C

@ On compression moulded according to ASTM D 1928 C

Processing Conditions:Melt Temperature (°C): 190 -280









recommended.



66

Product data sheet


52518 is a HDPE copolymer for Injection Moulding for applications requiring a good balance between easy of processability and flowability and mechanical properties.

Density: 0.950-0.954HDPE: HD-52518 MFI: 16-20


• Good balance between easy of

processability and flowability

Main Applications

• Housewares

• High fluidity

• Injection moulding grade

Additives

•Thermal Antioxidant (Process

Stabilizer)

• Catalyst neutralizer (acid

scavenger, lubricant)

HD52518


Test MethodTypical ValueUnitResin PropertiesD123818(g/10 min)Melt Index (190°C/ 2.16Kg)D15050.952g/mlDensity

Test MethodTypical ValueUnit Thermal Properties @D1525121(°C)Vicat Softening Point

Test MethodTypical ValueUnitMoulded Properties @D7901200(MPa)Flexural Modulus

D256/A19(J/m)Notched Izod Impact @ 23 °C@ on compression moulded specimen, according to ASTM D 1928°C


67



@ On compression moulded according to ASTM D1928CProcessing Conditions:Recommended barrel tempratures range between 190 °C and 280 °C.









recommended.



68

Product data sheet


32604 is a LLDPE for rotomolding which manufactured by gas phase process. This grade is suitable for all applications which need a good balance among moldability and mechanical properties together with an exceptional stress cracking resistance.

Density: 0.930 - 0.934LLDPE: LL-32604/UV MFI: 3 - 5

Features

• Exellent ESCR.

Applications

• High ESCR rotomolded items

Chemical containers.

Additives

• LL-32604:Thermal Antioxidant• LL-32604UV:Thermal AntioxidantUV Stabilizer

LLDPE made via Spherilene Process

LL32604LL32604 UV


Test MethodTypical ValueUnitResin Properties

D12384g/10 minMelt Index

D15050.932g/cm³Density

Test MethodTypical ValueUnitPhysical Properties

D7901350MpaFlectural Modulus

D256/ANBJ/mNotched Izod Impact @ 23 °C

D1693>1000hE.S.C.R

69



- On compression molded according to ASTM D1928CProcessing ConditionsRecommended barrel tempratures range between 190 °C and 280 °C.


Handellling and Health SafetysMolten polymers could be injured skin or eye so safety







recommended.


packagingJam Polymers Polyolefin resins are supplied in pllet form packed in 25kg bags. Alternative packaging modes are avalable for selected grades.

70

Product data sheet


MD-38504 is a UV stabilized linear medium density polyethylenee grade with a narrow molecular weight distribution. It is suitable for rotational molding and some injection molding application such as technical parts and closures. Characteristics include: good impact Strength, excellent external and internal surface finish, and is UV stabilized.

Density: 0.936-0.940MDPE: 38504 UV MFI: 3-5


• Good impact Strength

• High ESCR

Main Applications

• Rotomolding

Additives

•Thermal Antioxidant (Pro-

cess Stabilizer)

• Catalyst neutralizer (acid

scavenger, lubricant)

• UV Stabilizer

MD38504UV



Physical properties @D790650(MPa)Flexural ModulusD63815(MPa)Tensile Strength at yieldD638800(%)Tensile Strength at breakD25625KJ/m2Charpy Unnotched impact Strength

D1525115(°C)Vicat Softening TemperatureD224060Shore DDurometer Hardness

@ on compression moulded specimen obtained according to ASTM D 1928°C

MDPE made via Spherilene Gas-Phase Technology

71











after delivery.


Product data sheet


60511 is a HDPE injection molding grade which combines excellent flowability with high stiffness.This resin is well suited for housewares and toys applications.



• Excellent flowability with high stiffness.

Main Applications


• Houseware

• toys

Additives60511:•Thermal Antioxidant (Process Stabilizer)• Catalyst neutralizer (acid scavenger, lubricant)60511UV:• Catalyst neutralizer (acid scavenger, lubricant)• UV Stabilizer•Thermal Antioxidant (Process Stabilizer)

HD60511HD60511UV







74

Product data sheet


LL-235F6 is a linear-low density polyethylene resin (LLDPE), obtained by gas phase technology process. This grade designed for the production of different type of films and agricultural tapes. In this grade excellent processability, mechanical properties, melt strength and drawability achieved based on the balanced molecular weight and molecular weight distribution. LL-235F6 has good sealability and approvedfor food contactapplications.

Density: 0.920 - 0.924LLDPE: 235F6 MFI: 0.5 - 0.7


• Good Process ability, Excellent melt strength

Main Applications

• Agricultural Films and Tapes

• Lamination

• Shrink Film

• Industrial Films, Frozen Food Packaging

Additives

•Thermal Antioxidant (Process Stabilizer)• Catalyst neutralizer (acid scavenger, lubricant)

LL-235F6



ASTM MethodTypical ValueUnitResin PropertiesD12380.6(g/10 min)Melt Index (190°C/ 2.16Kg)D15050.922g/cm3Density

Thermal properties @D1525107(°C)Flexural modulusD3418127(°C)Notched Izod impact at 23°C

Mechanical Properties @D790385(MPa)Flexural modulusD88211.5/12 (MD/TD)(MPa)Tensile Strength at YieldD88247/28 (MD/TD)(MPa)Tensile Strength at BreakD882>600%Tensile Elongation at Break

D1922130/470 (MD/TD)grElmendorf TearD224055Shore DHardness1693>1000hrESCR

Oncompression molded according to ASTM D1928C

75







responsible for quality diminishing such as

color change, bad smell etc., which caused

by bad storage conditions. It is better to

process PE resin within 6 months after

delivery.


76

Product data sheet


LL-235F7 is a linear low-density polyethylene resin (LLDPE) obtained by gas phase technology process. This grade is suitable for the production of lamination, agricultural, shrink and general films. LL-235F7 combined good processability and melt strength with excellent mechanical properties, high sealability, good hot tack force and superior optical properties. This grade approved for food contact applications.

Density: 0.920 - 0.924LLDPE: 235F7 MFI: 0.6 - 0.8


• High sealability, superior optical properties

Main Applications

• lamination films

• Agricultural Films and Tapes

• Shrink Film

• Industrial Films

• Frozen Food Packaging

Additives

•Thermal Antioxidant (Process Stabilizer)• Catalyst neutralizer (acid scavenger, lubricant)

LL-235F7




Thermal properties @D1525107(°C)Flexural modulusD3418126(°C)Notched Izod impact at 23°C

Mechanical Properties @D790385(MPa)Flexural modulusD88217/14 (MD/TD)(MPa)Tensile Strength at YieldD88252/42 (MD/TD)(MPa)Tensile Strength at BreakD882>700%Tensile Elongation at Break

D192278/455 (MD/TD)grElmendorf TearD224055Shore DHardness1693>1000hrESCR


77











delivery.


78

Product data sheet


MD-3510 is a medium density polyethylene resin (MDPE), 1-butene copolymer, obtained by gas phase technology process. This grade designed for the production of drip irrigation tapes, pipes andmono or coex film applications. In this grade excellentextrusion properties combined with good mechanical properties. MD-3510 can be blended with different PE grades to modify the final properties of the products.

Density: 0.934 - 0.936MDPE: 3510 MFI: 0.3 - 0.5


• Excellent extrusion properties, Good mechanical properties

Main Applications

• tapes and pipes

• Heavy duty film applications

• FSS packaging films

Additives

•Thermal Antioxidant (Process Stabilizer)• Catalyst neutralizer (acid scavenger, lubricant)• Anti UV• PPA

MD-3510


MDPE made via Spherilene Process


Thermal properties @D1525120(°C)Vicat Softening PointD3418130(°C)Melting Point

Mechanical Properties @D790640(MPa)Flexural modulusD63818(MPa)Tensile Strength at YieldD63827(MPa)Tensile Strength at BreakD638>800%Tensile Elongation at Break

D256/A700j/mNotched Izod Impact @ 23 °CD224061Shore DHardness1693>1000hrESCR


79











delivery.


10

100

1000

10000

100000

1 10 100 1000 10000

Visc

osity

(Pa.

s)

Sheer rate (1/s)


80

Product data sheet


MD-3520 is a medium density polyethylene resin (MDPE), 1-butene copolymer, obtained by gas phase technology process. This grade designed for the production of drip irrigation tapes, pipes andmono or coex film applications. In this grade excellentprocessability combined with good mechanical properties. MD-3520 can be blended with different PE grades to modify the final properties of the products.

Density: 0.934 - 0.936MDPE: 3520 MFI: 0.5 - 0.7


• Excellent extrusion properties, Good mechanical properties

Main Applications

• tapes and pipes

• Heavy duty shapping bag

• Heavy duty film applications

• FSS automatic packaging films

Additives

•Thermal Antioxidant (Process Stabilizer)• Catalyst neutralizer (acid scavenger, lubricant)• Anti UV• PPA

MD-3520




Thermal properties @D1525118(°C)Vicat Softening PointD3418129(°C)Melting Point

Mechanical Properties @D790640(MPa)Flexural modulusD63818(MPa)Tensile Strength at YieldD63825(MPa)Tensile Strength at BreakD638>800%Tensile Elongation at Break

D256/A600j/mNotched Izod Impact @ 23 °CD224061Shore DHardness1693>1000hrESCR


81











delivery.


10

100

1000

10000

100000

1 10 100 1000 10000

Visc

osity

(Pa.

s)

Sheer rate (1/s)


82

Product data sheet


MD-35504 is a UV stabilized linear medium density polyethylene grade with a narrow molecular weight distribution. It is suitable for rotational molding and some injection molding application such as technical parts and closures. Characteristics include: good impact strength, excellent external internal surface finish, and is UV stabilized.

Density: 0.934 - 0.936MDPE: 35504 MFI: 3.5 - 5.5


• Good impact strength, High ESCR

Main Applications

• Tanks

• Containers

• Injection molded parts.

Additives

•Thermal Antioxidant (Process Stabilizer)• Catalyst neutralizer (acid scavenger, lubricant)• Anti UV

MD-35504




Thermal properties @D1525112(°C)Vicat Softening Point

Mechanical Properties @D790640(MPa)Flexural modulusD63817.5(MPa)Tensile Strength at YieldD63812(MPa)Tensile Strength at Break

D224060Shore DHardnessD256/A100J/mNotched Izod Impact @ 23 °C


83











delivery.


PolypropyleneProducts

Polypropylene productsJAM Polypropylene Co. (JPPC) was established in 2004 in Asaluyeh special economic zone. Thus, Jam Polypropylene Co. is in a unique position to contribute to the global petrochemical downstream markets while respecting all quality standards. To achieve this goal, Jam Polypropylene Co. enjoys some significant logistic advantages including availability of low-cost, gas-based feedstock, prominent production capacity, strategic location and proximity to port Asaluyeh that expedites the export operation and timely delivery of products. JPPC has acquired the unique state-of-the art Spheripol technology from LyondellBasell, as the world leading technology for the production of a very wide range of polypropylene (PP) grades.

MissionWe are committed to create sustainable value for all beneficiaries through steady development of Polypropylene production and sales based on innovation, products diversification and ceaseless quality improvement while complying with regulations.

JPPC is capable of producing a wide range of Polypropylene grades under the name of “Jampilen” with premium quality.

• HomopolymerThermoformingExtrusion (film, BOPP, cast, yarn, monofilament, sheet, CF, BCF, staple, nonwoven)Injection molding• Random copolymer Extrusion (film, sheet, BOPP, pipe)Injection molding• TerpolymerPackaging for food, stationery, Cosmetics, clothes and cigarettesShrinkable coextruded BOPP film for display packaging of cheese, bakery and meat products• Heterophasic copolymerInjection moldingThermoformingExtrusion (sheet, pipe, profile)Blow molding

PolypropyleneProducts

Product data sheet


Products Specification of Polypropylene plant

Grades Application

PropertyMFR

230˚ C, 2.16kg

Unit g/10min

Test Method ASTMD1238

Processing Method

Homopolymers

Jampilen HP1850 Automotive expansion tanks Under the hood and structural applications Injection molding 1.2

Jampilen HP500H Appliance components; Textile bobbins; Wheels Fittings; Caps & closures; Household articles Injection molding 1.8

Jampilen HP501H Furniture; Caps & closures Injection molding Thermoforming 2.1

Jampilen HP532JAutomotive under the hood application;Components for small household appliance Tapes and raffia; Film wrap; Filament yarn

Injection molding Extrusion (Raffia, tapes) 3

Jampilen HP500J Housewares; Caps & closures; small containers Toys Injection molding 3.1

Jampilen HP500LHousewares and components for appliances; Small container; Crates; Garden furniture; Stadium seats; Toys; Caps and closures; Parts for the automotive industry

Injection molding 6

Jampilen HP501M Furniture; Caps and closures; Housewares Injection molding 7.5

Jampilen HP500MHousewares; Food containers; Garden furniture Toys; Components for appliances Parts for the automotive industry

Injection molding 9

Jampilen HP500N Cool boxes; Vacuum flasks; Flower pots; Garden furniture; Toys; 3-part syringes; Caps and closures; Crates Injection molding 12

Jampilen HP500P TWIM articles; Containers; Boxes; Toys; Household articles; caps and closures Injection molding 17

Jampilen HP371P 3-parts syringes; Medical articles and healthcare applications; Lab wares; Household articles; Packing components Injection molding 18

Jampilen HA840R Food packaging containers; Housewares; Furniture; Small appliances; Technical parts; Caps and closures Injection molding 20

Jampilen HP548R Furniture; Caps and closures; Housewares; TWIM food containers; Opaque containers Injection molding 23

Jampilen HP400R TWIM containers; Toys; Vacuum flasks; Household and kitchen articles; Furniture Injection molding 25

Jampilen HP483R TWIM; Furniture; Caps and closures; Housewares; Opaque Containers Injection molding 27

Jampilen HP648STWIM packaging in the cosmetics and food industry; Pens; CD and DVD boxes; Caps and closures; Small appliances; Office accessories; Camping articles

Injection molding 35

Jampilen HA701T TWIM food containers Injection molding 45

Jampilen HP648T Housewares; TWIM food containers; Dairy packaging; Opaque containers Injection molding 53

Product data sheet



Grades Application

PropertyMFR

230˚ C, 2.16kg

Unit g/10min


Processing Method

Jampilen HP522H Food packaging; Packaging of cosmetics; Lamination to other flexible films Extrusion(BOPP film) 2

Jampilen HP520H Food packaging; textile packaging; Flower wrappings; Adhesive tapes; Lamination to other flexible films Extrusion(BOPP film) 2

Jampilen HP528H Automatic packaging of bakery products; snacks and pasta; Overwrapping of boxes and cigarette packets Extrusion(BOPP film) 2

Jampilen HP593H BOPP packaging; Food packaging films Extrusion(BOPP film) Thermoforming 2

Jampilen HP422H Food packaging film; Packaging of cosmetics; Barrier film Extrusion(BOPP film) 2.1

Jampilen HP421HAutomatic packaging of bakery products; snacks and pasta; Overwrapping of boxes and cigarette packets; Textile packaging film; Surface protection film; Barrier film

Extrusion(BOPP film) 2.1

Jampilen HP529J Food and medical packaging Extrusion(BOPP film) 2.6

Jampilen HP525J High quality packaging film for food; Lamination to other films; Metalizing film; Medical packaging; Thermofomed food containers

Extrusion(BOPP film) Thermoforming 3

Jampilen HP524J High quality packaging film for food; Lamination to other films; Medical packaging Extrusion(BOPP film) 3

Jampilen HP528J BOPP packaging; Food packaging films Extrusion(BOPP film) 3

Jampilen HP522J BOPP packaging; Food packaging films; Thermoformed objects and containers

Extrusion(BOPP film) Thermoforming 3

Jampilen HP527J High quality packaging for food; Lamination to other films; Medical packaging Extrusion(BOPP film) 3

Jampilen ADXP699 Flowers and textile packaging; Sterilizable and pastorizable food packaging; Printing lamination and tobacco film; Strapping Extrusion(BOPP and cast film) 3.5

Jampilen HP420M BOPP films; Drinking straws; Food packagingExtrusion(BOPP film on tubular double bubble lines, cast film)

8

Jampilen HP510M

Film for food packaging such as pasta and snacks; Film for packaging of flowers, books, stationery; Lamination with polyester, polyamide and aluminum for packaging of snacks, crisp, sweets; Small pipes and drinking straws; Blow molded pigments bottles; Coextruded sheet.

Blown film(cast water quenched, water quenched), Extrusion(small pipes), Blown molding

9

Jampilen HP515M Shopping bags; Packaging for snacks, bakery products, books; Stationery folders; Twines and ropes

Extrusion(Cast film), Blown film 9

Jampilen HP502H

Sheet for thermoforming (drinking beakers, packaging for dairy products, trays for fruit); Bags, industrial fabrics and mats; Baler twines; Brush and broom filling; Profiles and small diameter pipes; Strapping; Blow molded small containers

Extrusion (Sheet, film yarn, monofilament), Thermoforming, Blow molding, Injection molding

1.8

Jampilen HP550JStiff sheet for high quality thermoforming such as vending cups; Film yarn, raffia, tapes; Carpet backings, bags, industrial fabrics; Baler twines; Brush and broom filling; Nets

Extrusion (Film yarn, monofilament, sheet); Thermoforming

3.2

Available

Available

Product data sheet



Jampilen HP552J Film yarn for industrial fabrics, heavy duty bags; Ropes and twines; Blown film packaging

Extrusion (Film yarn, monofilament); Water-quenched blown film

3.2

Jampilen HP456J Raffia, tapes, strapping; Artificial grass; Geotextile and agricultureExtrusion (Raffia, tape, monofilament, sheet); Thermoforming

3.4

Jampilen HP510LBaler twines; Brush and broom filling; Coextruded film for packaging; Thin sheet for stationery folders; Sheet for thermoforming; Straws; Gunnies

Extrusion (Film yarn, monofilament, sheet, cast film)

6

Jampilen HP502N Carpets, rugs and garments such as overalls; Continuous filament for ropes, belts; Decorative ribbons

Extrusion (Staple fiber, continuous filament) 12

Jampilen HP554NFabrics for feminine care products, diapers, wipes; Filters and fabrics for automotive, clothing and furniture industry; Fine denier staple fiber

Extrusion (Fiber) 12

Jampilen HP557N Staple fibers for non-woven fabrics; Feminine care products; Diapers; Medical disposables; Wipes, filters and linings Extrusion (Fiber, staple) 12

Jampilen HP552N Nonwoven staple fibers; Staple fiber; Filament yarn; Hygiene nonwoven; Wipes, tissues; Cast film

Extrusion (Continuous filament/spinning, staple fiber, cast film)

13

Jampilen HP554P

Nonwoven staple fibers; Overstock for diapers; Feminine care products; Incontinence pads; Filters and fabrics for the clothing and furniture industry; Fine denier filaments for carpet face yarn; Multifilament yarn

Extrusion (CF, staple) 18

Jampilen HP502P BCF and CF yarns; Staple fibers Extrusion (fiber) 16

Jampilen HP562R

Spun bonded, nonwoven fabrics; Diapers, medical and sanitary tissues; Protective fabrics for agricultural, industrial and medical applications; Backings and linings for furniture, bedding and carpet industries; Oriented yarn and bulked continuous filament

Extrusion (CF) 25

Jampilen HP502R

Bulked continuous filament for carpet face yarns; High tenacity continuous filament for straps for backpacks; Handles for big bags and safety belts; Upholstery, sportswear and heavy duty clothing; Low denier staple fibers for thermobonding

Extrusion (BCF, CF, staple) 25

Jampilen HP552R

Nonwoven fabrics for diapers, medical-sanitary applications; Wipes and tissues; Straps for backpacks, sport bags, bulk bags; Upholstery and sportswear; Bulk continuous filament for carpets; Nonwoven staple fiber; Hygiene nonwoven

Extrusion (BCF, CF, staple) 25

Jampilen HP561RBulk continuous filament and continuous filament; HTY and spun bond nonwoven; Filament yarn; Geotextile and agriculture; Hygiene nonwoven; Wipes, tissues

Extrusion (Fiber) 25

Jampilen HP462R HTY and spun bond nonwoven; Filament yarn; Geotextile and agriculture; Hygiene nonwoven; Protective clothes; Wipes, tissues

Extrusion (filament, fiber spinning) 25

Jampilen HP561SHTY and spun bond nonwoven; Continuous filament; Filament yarn; Geotextile and agriculture; Hygiene nonwoven; Wipes, tissues

Extrusion (Filament) 33

Available

Available

Grades Application

PropertyMFR

230˚ C, 2.16kg

Unit g/10min


Processing Method

Product data sheet



Jampilen HP562S BCF for carpet face yarns; High tenacity CF for backpacks; Handles for big bags and safety belts; Upholstery and heavy duty clothing Extrusion (BCF, CF) 35

Jampilen HP565S

Spun bonded, nonwoven fabrics; Diapers, medical and sanitary tissues; Protective fabrics for agricultural, industrial and medical applications; Backings and linings for furniture, bedding and carpet industries; Oriented yarn and bulked continuous filament

Extrusion (BCF, CF) 38

Jampilen HP564S

Spun bonded, nonwoven fabrics; Fabrics for diapers, feminine care, medical and sanitary tissues; Protective fabrics for agricultural, industrial and medical applications; Backings and linings for the furniture and carpet industries; Oreinted yarn and bulked continuous filament; Wipe and tissues

Extrusion (Filament); Fiber Spinning 42

Jampilen HP432C

Thick, heavy sheer for industrial applications; Strapping; Tubes, profiles and pipes; Thin sheet for thermoforming dairy tubs ad other food packaging; Small containers and technical parts; Wheels, fittings and high performance industrial components

Extrusion (Sheet); Thermoforming; Injection molding; Extrusion blow molding

0.3

Jampilen HP502C Thick sheet for technical and industrial applications; Profiles and pipes

Extrusion (Sheet, pipe); Compression molding 0.3

Jampilen H2150 Rigid profiles and sheet; Industrial and chemicals containers Extrusion (Pipe, sheet); Compression molding 0.3

Jampilen H2450 Rigid profiles and sheet Extrusion (Pipe, sheet); Compression molding 0.3

Jampilen HP501D Strapping, Sheet, Profiles and small diameter pipes; Nets for olive harvesting; Small and medium sized containers

Extrusion (Sheet, pipe); Blow molding 0.7

Jampilen HP502H

Sheet for thermoforming (drinking beakers, packaging for dairy products, trays for fruit); Bags, industrial fabrics and mats; Baler twines; Brush and broom filling; Profiles and small diameter pipes; Strapping; Blow molded small containers

Extrusion (Sheet, film yarn, monofilament); Thermoforming; Blow molding; Injection molding

1.8

Jampilen HP456H Raffia, Tapes, Strapping; Artificial grass; Geotextile and agriculture Extrusion (Raffia, tapes); Thermoforming 1.8

Jampilen HP640H Hot fill applications; Vending cups; Blister packs; Pots for diary products; Trays for biscuits, chocolates and fruits; Clear containers

Extrusion (Sheet); Thermoforming 2

Jampilen HP593H BOPP films; Food packaging film BOPP; Extrusion thermoforming 2

Jampilen HP501H Furniture; Caps and closures Injection molding; Thermoforming 2.1

Jampilen HP540J Fruit baskets; Trays; Transparent drinking cups and containers; Housewares

Extrusion; Thermoforming; Solid phase press form 3.2

Jampilen HA840K Transparent food containers; Containers for high temperature filing Extrusion (Sheet, film); Thermoforming 3.5

Jampilen ADXP680 Transparent food containers; Containers for high temperature filing Extrusion (Sheet, film); Thermoforming 3.5

Jampilen ADXP699 Flower and textile packaging; Sterilizable and pastorizable food packaging; Printing lamination and tobacco film; Strapping Extrusion (BOPP, cast film) 3.5

Available

Grades Application

PropertyMFR

230˚ C, 2.16kg

Unit g/10min


Processing Method

Product data sheet


Jampilen HP540K Vending cups; Blister packs; Pots for dairy products; Trays for biscuits, chocolates and fruits; Retortable containers

Extrusion (Sheet); Thermoforming 3.8

Random Copolymer

Jampilen RP342N

Injection molded containers and thin walled packaging; Food storage containers; Household articles; Packaging for food, cosmetics and pharmaceutical products; Lids, caps and closures; Coextrusion with other polypropylene resins to produce multilayer sheet for thermoforming trays for fresh pasta and bakery products

Injection molding; Extrusion (Sheet) 10

Jampilen RP340N

Injection molded containers and thin walled packaging; Food storage containers; Household articles; Packaging for food, cosmetics and pharmaceutical products; Lids, caps and closures; Coextrusion with other polypropylene resins to produce multilayer sheet for thermoforming trays for fresh pasta and bakery products

Injection molding; Extrusion (Sheet) 11

Jampilen RP1903 Housewares; Consumer packaging (Detergent, cosmetic) Injection stretch blow molding 10.5

Jampilen RP344N Containers; Appliances; Housewares; Consumer packaging Injection molding; Injection blow molding 13

Jampilen RP348R Housewares; Caps and closures Injection molding 23

Jampilen RP340R

Household containers, housewares; Packaging for food, cosmetics and pharmaceutical products; Clear tubs and pots for ice cream; Medical sector such as syringes; Lids, caps and closures; CD and DVD boxes; Injection stretch blow molded containers and bottles; Sports, Leisure and toys

Injection molding; Injection stretch blow molding 25

Jampilen RP345S

Household containers, housewares; Packaging for food, cosmetics and pharmaceutical products; TWIM; Lids, caps and closures; Medical sector such as syringes; CD and DVD boxes; Bottles and containers produced with ISBM

Injection molding; Injection stretch blow molding 40

Jampilen RP348T Thin wall packaging with high transparency; Sports, leisure and toys; Housewares; Clear containers Injection molding 48

Jampilen RP348U Very thin wall items; Sports, leisure and toys; Housewares; Clear containers Injection molding 75

Jampilen RC1601 Metalized packaging film, skin layer Extrusion (BOPP) 5

Jampilen RP210MMonolayer film; Sealing layer in coextruded films or in laminated structures; Packaging of foodstuffs such as biscuits, sweet; Packaging shirts, knitwear and hosiery; Stationery folders

Extrusion (Cast film); Water- quenched blown film 6

Jampilen RP215MMonolayer film; Sealing layer in coextruded films or in laminated structures; Packaging of foodstuffs such as biscuits, sweet; Packaging shirts, knitwear and hosiery; Stationery folders

Extrusion (Cast film); Water- quenched blown film 6

Jampilen RP310MMonolayer film; Sealing layer in coextruded films or in laminated structures; Packaging of foodstuffs such as biscuits, sweet; Packaging of books, stationery, blankets, shirts; Caps and closures

Extrusion (Cast film); Water- quenched blown film; Injection molding

8

Jampilen RP320M Cast film; Packaging of foodstuff such as sweets, pasta, biscuits and snacks; packaging of books, stationery, blankets, shirts and hosiery Extrusion (Cast film) 8


Available

Grades Application

PropertyMFR

230˚ C, 2.16kg

Unit g/10min


Processing Method

Product data sheet


Jampilen RP316MLamination to BOPP film; Packaging of foodstuff such as sweets, pasta, biscuits and snacks; Packaging of books, stationery, blankets, shirts and hosiery

Extrusion (Cast film); Water-quenched blown film 8

Jampilen RP325M Cast film; Packaging of foodstuff such as sweets, pasta, biscuits and snacks; packaging of books, stationery, blankets, shirts and hosiery Extrusion (Cast film) 8

Jampilen RP312M Monolayer films; Sealing layer in coextruded films or in laminated structures; packaging of foodstuff, shirts, knitwear and hosiery

Extrusion (Cast film); Blown film 8

Jampilen RCXP598 Monolayer films; Sealing in coextruded films or in laminated structures; Packaging of foodstuff and textiles; Stationery folders


Jampilen RCXP599 Monolayer films; Sealing in coextruded films or in laminated structures; Packaging of foodstuff and textiles; Stationery folders


Jampilen RP300D Semi finished products and profiles; Sheet; Small diameter pipes Extrusion (Pipe, sheet); Compression molding 0.6

Jampilen RP270G

Transparent bottles and containers for blood, intravenous solutions, pharmaceutical solutions, medicines and salves packaging for health care products; Film and sheet for thermoforming; Blown-fill-seal applications

Injection and extrusion blow molding; Extrusion (Sheet); Blown film; Injection molding

1.8

Jampilen RP240G

Bottles for detergents and toiletries, flat mineral water, fresh fruit juice and concentrates; Jars for condiments and preserves; Stationery folders; Thermoforming articles such as trays for fresh pasta, sweets od biscuits

Extrusion (Sheet); Blow molding 1.8

Jampilen RP210G

Film for packaging; Sheet for stationery folders and displays; Blow molding of high gloss monolayer bottles, clear or pigmented for the packaging of cosmetics, detergents, chemicals and food-stuffs; Thermoformed food containers; Double bubble shrink film

Injection molding; Extrusion blow molding; Extrusion (Sheet, pipe, semi finished products); Double bubble film

1.8

Impact Copolymer

Jampilen EP302K Toys; Sports article; Small containers; Housewares; Closures and caps

Injection molding; Thermoforming 3.5

Jampilen EP200K Housewares, toys, indoor and outdoor furniture; Parts for sport equipment; Boxes, containers, pallets; Blow molded bottles

Injection molding; Injection stretch blow molding 3.5

Jampilen EP300K Housewares, seats, toys; Caps and closures; Medium sized containers, buckets, pails; Blow molded bottles

Injection molding; Thermoforming; Injection stretch blow molding

4

Jampilen EP340K Sports, leisure and toys; Transport and cold storage crates; Luggage Injection molding; Thermoforming 4

Jampilen EP540L Small and medium sized rigid containers; Packaging items and housewares; Caps and closures Injection molding 6

Jampilen EP300L Housewares; Crates; Caps and closures; Sports, leisure and toys Injection molding 6

Jampilen EP440L packaging, automotive; Luggage, paint pails, buckets; Containers, crates, batteries Injection molding 6


Available

Grades Application

PropertyMFR

230˚ C, 2.16kg

Unit g/10min


Processing Method

Product data sheet


Jampilen EP332LBattery cases, cooling water compensation reservoirs; Brake fluid reservoirs, wash water reservoirs, luggage compartment trims; Appliances

Injection molding 7

Jampilen EP300M Housewares; Automotive parts; Thin walled packaging; Pails, crates, caps, closures, lids; Wheels, garden furniture, chair shells Injection molding 7

Jampilen EP340M Housewares; Crates; Luggage; Sports, leisure and toys Injection molding 7.5

Jampilen EP200M Toys; Household appliances; Technical articles Injection molding 8

Jampilen EP3130UV Automotive parts; Outdoor applications; Technical articles Injection molding 10

Jampilen EP540N

Packaging, automotive and consumer goods industries; Housewares, containers, bins, baskets, flowerpots; Toys, lids, caps and closures; garden furniture, chair shells, crates; Automotive parts


Jampilen EP440N Packaging, automotive and consumer goods industries; Luggage, paint pails, buckets, containers; Crates, batteries and Large toys Injection molding 12

Jampilen EP548N

Packaging, automotive and consumer goods industries; Housewares, containers, bins, baskets, flowerpots; Toys, lids, caps and closures; Garden furniture, chair shells, crates, trays; Automotive parts


Jampilen BA238G3 Automotive bumpers; Outdoor applications Injection molding 12

Jampilen EP300M Crates; Housewares; Industrial components; Automotive parts Injection molding 15

Jampilen EP540P Caps and closures; Housewares; Luggage; Opaque containers Injection molding 15

Jampilen EP548P Crates; Furniture; Housewares; Opaque containers Injection molding 16

Jampilen EP548R TWIM; Articles with long flow parts such as flower pots; Sports, leisure and toys Injection molding 21

Jampilen EP440R Crates; Housewares and furniture; Sports, leisure and toys; TWIM food containers Injection molding 20

Jampilen EP448STWIM; Margarine tubs and pots for soft cheeses, pudding; Caps, closures and flower pots; Appliance components, small pails, cool boxes and food containers


Jampilen EP340S Boxes, crates, pails; Toys, appliance components, battery cases; Caps, closures and flower pots; TWIM Injection molding 42

Jampilen EP548S Thin wall packaging; Caps and closures; Flower pots, cool boxes; Opaque food containers; Housewares; Sports, leisure and toys Injection molding 44

Jampilen EP448T Injection molded caps and closures; Sports; Leisure and toys; Housewares; TWIM food containers Injection molding 48

Jampilen EP548T TWIM food containers; Housewares; Caps and closures; Flower pots and cool boxes; Sports, leisure and toys Injection molding 50

Jampilen EP348UThin-walled packaging and food containers; CD and DVD boxes; Lids, caps and closures; Housewares, cool boxes; Small buckets, laundry baskets, flower pots


Jampilen EP548U Containers; Sports, leisure and toys; TWIM food containers; Housewares Injection molding 70


Available

Available

Available

Grades Application

PropertyMFR

230˚ C, 2.16kg

Unit g/10min


Processing Method

Product data sheet


Jampilen EP648VThin-walled packaging; Housewares and garden furniture; Laundry bind, drawer trays, CD and DVD boxes; Opaque containers for dairy products


Jampilen SP179 Battery cases Injection molding 8

Jampilen H1022 Rigid profiles and sheets Extrusion (Sheet, profile) 0.3

Jampilen H2464 Underground drainage and swage pipes; Sheet and profile Extrusion (Pipe, sheet, profile) 0.3

Jampilen EPD60R

Appliance components; Under-the-hood automotive parts; Toolboxes, suitcases and large containers; Profiles and tough sheet for industrial applications; Industrial, sail and waste pipe; Thick sheets

Extrusion (Pipe, sheet); Thermoforming; Compression molding; Blow molding

0.4

Jampilen EP300DProfiles, pipes; Ducts for electrical distribution and automotive parts; Glossy monolayer bottles for toiletries, detergents; Corrugated board and sheet for thermoforming

Extrusion; Blow molding 0.8

Jampilen EP310D

Film for adhesive tapes; Film for lamination to paper and other resins; Extrusion blow molded containers for detergents, toiletries; Blow molded technical parts; Corrugated board, smooth and corrugated pipe

Extrusion blow molding; Blown film; Injection molding 0.8

Jampilen EP400G Corrugated board; Sheet for thermoforming; Blow molded bottles and containers for detergents Extrusion; Blow molding 1.3

Jampilen EP440GCrates; Panels and profiles; Corrugated sheet; Conduit pipes and fittings for electrical distribution and cable protection; Blow molded bottles and containers

Thermoforming; Extrusion blow molding 1.3

Terpolymer

Jampilen RP127KPackaging for food, stationery, cosmetics, clothes and cigarettes; Shrinkable coextruded BOPP film for display packaging of cheese bakery and meat

Extrusion (BOPP film) 5

Jampilen RP129 Packaging for coffee, tea, meat, snacks; Packaging for medical applications, beer labels and liquor cartons Extrusion (BOPP film) 5

Jampilen RP128MPackaging for food, stationery, cosmetics, clothes and cigarettes; Shrinkable coextruded BOPP film for display packaging of cheese bakery and meat

Extrusion (BOPP film) 8

Jampilen RP120L-Packaging for food, stationery, Cosmetics, clothes and cigarettes-Shrinkable coextruded BOPP film for display packaging of cheese, bakery and meat products

BOPP and CPP film sealing layer; with out slip and anti-block additives

0.6


Available

Available

Grades Application

PropertyMFR

230˚ C, 2.16kg

Unit g/10min


Processing Method

Product data sheet


″Jampilen HP525J″ is a medium flow homopolymer with bimodal molecular weight distribution and good clarity intended for BOPP films. The product is suitable for metallizable film, both as monolayer and in coextruded structures. It contains a standard processing stabilisation but does not contain any slip, antiblocking agents and is calcium stearate free. ″Jampilen HP525J″ offers good optical properties, easy processing and very stable film profile. Typical applications are BOPP packaging films and Solid Phase Thermoforming sheets.″Jampilen HP525J″ is suitable for food contact

Density: 0.9Jampilen HP525J MFI: 3

Characteristic Properties

• Good optical properties, easy processing and very stable film profile

Main Applications

• High quality packaging film for food

• Lamination to other films

• Metalizable film

• Medical packaging

• Thermoformed food containers

• BOPP Film

Additives

• Antioxidant package

HP525J

MethodUnitValueTypical Properties Physical

ASTM D1238g/10min3.0Melt Flow Rate (230 oC, 2.16kg)ASTM D1505g/cm30.9Density

MechanicalASTM D790MPa1400Flexural ModulusASTM D638MPa32Tensile Strength at YieldASTM D638%9Tensile Elongation at YieldASTM D256J/m55Izod Impact Strength(notched)at 23oC

ThermalASTM D1525oC152Vicat softening point (10N)ASTM D648oC84H.D.T. (0.45 MPa)

ASTM D3012hours500Accelerated oven ageing in air at 150oC

OpticalASTM D1003%0.5Haze (20μm)

Product data sheet


″Jampilen HP550J″ is a polypropylene homopolymer particularly suitable for the extrusion of sheet for thermoforming, film yarn and monofilament. This grade combines suitable processability with good mechanical properties.″Jampilen HP550J″ is designed for the production of films that can be converted into stretched tapes for weaving applications. Textile film yarns with a denier count of not more than 1100 to 1200 are used for the production of carpet backings, bags, industrial fabrics, mats and artificial grass. Film yarn with a denier count ranging from 3000 to 28000 is used for baler twines, packaging twines and ropes.″Jampilen HP550J″ is suitable for food contact.

Density: 0.9Jampilen HP550J MFI: 3.2


• Good processability, good mechanical properties

Main Applications

• Stiff sheet for high quality thermoformings such as vending cups, packaging for dairy products and trays for fruit, biscuits and chocolates• Film yarn, raffia, tapes, strapping• Carpet backings, bags, industrial fabrics, mats• Artificial grass• Baler twines, packaging twines and ropes• Brush and broom filling and technical applications• Nets for various purposes

Additives


HP550J






Product data sheet


Jampilen HP510L″ is a polypropylene homopolymer with good flow properties and is particularly suitable for the extrusion of film yarn, monofilament, cast film and sheet.

Density: 0.9Jampilen HP510L MFI: 6


• Outstanding processability, Good mechanical properties

Main Applications

• Fiber extrusion (Sheet, film yarn, monofilament), Cast film; Baler twines, packaging twines and ropes; Brush and broom filling and technical applications; Coextruded film for packaging; Thin sheet for stationery folders; Sheet for thermoforming;

Gunny sacks

Additives


HP510L






Product data sheet


″Jampilen HP552R″ is a high melt flow homopolymer for the production of CF, BCF and fine denier staple fibers at medium to high spinning speeds and exhibits excellent antigasfading properties.″Jampilen HP552R″ is suitable for nonwoven fabrics for diapers, medical-sanitary applications and wipes. Another typical application is high tenacity continuous filament for straps for backpacks, sport bags, bulk bags and safety belts. Continuous filament with medium tenacity is used for upholstery and sportswear. ″Jampilen HP552R″ is also suited for the production of bulked continuous filament for carpets.″Jampilen HP552R″ is suitable for food contact.

Density: 0.9Jampilen HP552R MFI: 25


• High melt flow; Excellent antigas-

fading properties; Good processa-

bility

Main Applications

• Wipes and tissues• Straps for backpacks, sport bags, bulk bags and for safety belts• Upholstery and sportswear• Bulk continuous filament for carpets• Nonwoven staple fiber• Injection molded articles, housewares, etc

Additives


HP552R


ASTM D1238g/10min25Melt Flow Rate (230 oC, 2.16kg)ASTM D1505g/cm30.9Density




Product data sheet


″Jampilen HP564S″ is a high melt flow rate homopolymer with a narrow molecular weight distribution for the high speed production of low denier continuous filament for spunbonded, nonwoven fabrics with an excellent balance of mechanical properties and softness. This grade is formulated with an anti-gasfading stabilization package and characterized by consistent high speed and low nonwoven weights. The major applications for spunbonded fabrics made of ″Jampilen HP564S″ are diapers, medical and sanitary tissues, protective fabrics for agricultural, industrial and medical applications, backings and linings for the furniture and carpet industries. This grade can also be used for the production of partially oriented yarn and bulked continuous filament. ″Jampilen HP564S″ is suitable for food contact.

Density: 0.9Jampilen HP564S MFI: 42


• High melt flow; Narrow molecular weight distribution; Easy processability; Gasfading resistant

Main Applications

• Spunbonded, nonwoven fabrics• Fabrics for diapers, feminine care, medical and sanitary tissues• Protective fabrics for agricultural, industrial and medical applications• Backings and linings for the furni-ture and carpet industries• Oriented yarn and bulked continu-ous filament• Wipe and Tissues

Additives

• Antioxidant package,

Antistatic agent

HP564S






Product data sheet


″Jampilen EP440G″ is a nucleated heterophasic copolymer especially developed for extrusion applications. In comparison with standard polypropylene copolymers with the same fluidity, ″Jampilen EP440G″ exhibits higher stiffness, superior impact properties at room and sub-zero temperatures, very high dimensional stability and excellent creep and deforming resistance. The main applications of ″Jampilen EP440G″ are thermoforming, corrugated board and extrusion low molding.

Density: 0.9Jampilen EP440G MFI: 1.3


• Very high impact resistance; High stiffness; Very high dimensional stability; Excellent creep and deforming resistance

Main Applications

• Corrugated board, panels, profiles and crates• Corrugated pipes for automotive and machine construction• Conduit pipes and fittings for electrical distribution and cable protection• Blow molded bottles and containers• Pipe fittings

Additives


Nucleating agent

EP440G




ASTM D256J/m70Izod Impact Strength(notched)at -20oC



Product data sheet


″Jampilen EP440L″ is a medium flow heterophasic polypropylene copolymer with improved balance of mechanical properties. The product features high stiffness and outstanding impact strength at low temperatures and is specifically designed for injection molding applications. In comparison with conventional copolymers with the same MFR and same rigidity, ″Jampilen EP440L″, exhibits 35 % higher toughness.″Jampilen EP440L″ is suitable for a wide range of applications in the packaging, automotive and consumer goods industries. Typical applications include luggage, paint pails, buckets, containers, crates, batteries and large toys.

Density: 0.9Jampilen EP440L MFI: 6


• High impact strength; High

stiffness

Main Applications

• Packaging, automotive and consumer goods industries• Luggage, paint pails, buckets• Containers, crates, batteries and large toys

Additives


Nucleating agent

EP440L







Product data sheet


″Jampilen EP3130UV″ is a non-filled polypropylene copolymer for injection molding with very high impact strength. The product has good U.V. resistance designed for outdoor applications. This grade is used for production of automotive parts, such as bumpers, and compounding.

Density: 0.9Jampilen EP3130UV MFI: 10


• Very high impact strength especially at low temperatures; Good U.V. resistance; Good processability

Main Applications

• Automotive parts• Outdoor applications• Technical articles

Additives


Nucleating agent, UV stabilizer

EP3130UV







Product data sheet


″Jampilen EP548R″ is a nucleated, antistatic formulated, high fluidity heterophasic copolymer used for thin-walled injection molding. Items made with ″Jampilen EP548R″ exhibit high stiffness, relatively good impact resistance and excellent antistatic properties. Due to its excellent moldability and short cycle times, ″Jampilen EP548R″ allows high productivity rates. The finished items show good mechanical properties, and high dimensional stability.″Jampilen EP548R″ is very well suited for the production of thin-wall articles or articles with long flow paths such as flower pots, containers, housewares, filters, filter housings and appliance components.″Jampilen EP548R″ is suitable for food contact.

Density: 0.9Jampilen EP548R MFI: 21


• Good impact strength; High

stiffness; Excellent antistatic

properties; Excellent moldability

and short cycle times

Main Applications

• Thin-wall articles• Articles with long flow paths such as flower pots, containers, housewares, filters, filter housings and appliance components• Sports, Leisure and toys

Additives

• Antistatic agent,

Antioxidant package,

Nucleating agent

EP548R







Product data sheet


″Jampilen EP548T″ is a high melt flow rate, nucleated heterophasic copolymer with a special antistatic additivation used for thin-wall injection molding, IML and houseware applications. The product features improved balance of mechanical properties. The use of ″Jampilen EPX-548T″ allows high productivity due to the easy mold filling and short cycle times.In comparison with conventional copolymers with the same MFR and the same toughness, ″Jampilen EP548T″ exhibits 15% higher rigidity.″Jampilen EP548T″ is suitable for food contact.

Density: 0.9Jampilen EP548T MFI: 50


• High fluidity; Easy mold filling and short cycle times; Desirable impact/ stiffness balance; Good dimensional stability; Unspecified antistatic properties

Main Applications

• TWIM/IML food containers (Marga-rine tubs, yoghurt pots, pots for soft cheese, pudding, etc.)• Housewares• Caps and closures• Flower pots and cool boxes• Sports, leisure and toys

Additives

• Antistatic agent, Antioxidant package, Nucleating agent

EP548T







Product data sheet


″Jampilen RP345S″ is a polypropylene random copolymer with high fluidity and outstanding transparency and optical properties.″Jampilen RP345S″ is the material of choice for applications where transparency and aesthetics are primary requirements. This grade is designed for injection molding and injection stretch blow molding (ISBM) applications. Thanks to its high fluidity, one can experience reduced cycle times and energy savings compared to conventional grades.″Jampilen RP345S″ is suitable for the packaging of non-oxygen sensitive products; hence, it counts as an effective alternative for PVC and PET in ISBM.

Density: 0.9Jampilen RP345S MFI: 40


• High fluidity; Excellent Optical

properties; Unspecified antistatic

properties; Suitable organoleptic

properties; Excellent processability

and reduced cycle times

Main Applications

• Household containers, housewares• Packaging for food, cosmetics and pharmaceutical products• TWIM• Lids, caps and closures• Medical sector such as syringes, test tubes and vials• Sports, leisure and toys• CD and DVD boxes• Bottles and containers produced with ISBM

Additives

• Antistatic agent,

Antioxidant package, Clarifier

RP345S






OpticalASTM D1003%11Haze (1 mm)ASTM D2457----90Gloss

Product data sheet


″Jampilen RP-120L″ is a low sealing temperature polypropylene resin. The product is designed for BOPP films and is formulated with standard processing stabilization and is calcium stearate free.″Jampilen RP-120L″ exhibits very high transparency, excellent gloss and outstanding heat weldability. Films from ″Jampilen RP-120L″ show good hot tack and low seal initiation temperature (115 to 120°C).″Jampilen RP-120L″ is suitable for the production of shrinkable coextruded BOPP film for display packaging of cheese, bakery and meat products.″Jampilen RP-120L″ is suitable for food contact.

Density: 0.9Jampilen RP120L MFI: 6


• Very high transparency

• Good heat weldability

• Excellent gloss

• High resistance to oxygen, moisture, fats and oils terpolymer

Main Applications

• Packaging for food, stationery, Cos-metics, clothes and cigarettes• Shrinkable coextruded BOPP film for display packaging of cheese, bakery and meat products

Additives

• Food

RP120L




ThermalASTM D3417oC136Melting Temperature (DSC)ASTM D1525oC118Vicat softening point (10N)ASTM D648oC65H.D.T. (0.46 MPa)

ASTM D3012hours500Accelerated oven ageing in air at 150°C

OpticalASTM D1003%1.0HazeASTM D2543---85Gloss

ABS-RubberProducts

Introduction:PadJam Polymer Development Company (a joint-stock company) has been established in 2014 with the aid of developing and operation of ABS/Rubber plant by Jam Petrochemical Company. The project is located in the Pars Energy Special Economic Zone in Assaluyeh, on an area of 15 hectares, with a production capacity of 200,000 metric tons of ABS per year and 60,000 metric tons of rubber per year, licensed based on the state-of-the-art technical know-how of one of the European best reputed companies, Versalis-Eni S.p.A (Polimeri-Europa), is under construction and has so far grown by more than 82% progress. The basic engineering of the project is done by Tecnimont Company. PJPC is able to produce 9 different grades of ABS and 3 different rubber products in 7 different grades with the highest quality (for the first time and exclusively in Iran). About half of the produced rubber in the Rubber Plant is used as a feed in ABS Plant in order to adjust physical and mechanical properties of ABS, and the remaining rubber could be supplied to market. The feeds of this complex, including Styrene, account for 152,000 tons per year through the pipeline from Pars Petrochemical Complex, 1, 3 butadiene, account for 54,000 thousand tons per year through pipeline from Jam Petrochemical Complex and Acrylonitrile account for 47,000 thousand tons per year which is imported.

Rubber & ABS Plant:The Rubber production plant of PadJam Petrochemical Complex is the first and only manufacturer of three products SBS, SB and LCBR in 7 popular grades based on market demand in Iran. The factory is designed and manufactured in accordance with the batch process solution polymerization to produce a wide range of grades, and is expected to be on operation by the beginning of the 2020.The ABS production plant of PadJam Petrochemical Complex is the first and only manufacturer of ABS products with Continuous Mass technology in 9 popular grades based on market demand in Iran. The plant is expected to be on operation in the middle of the 2019.

Product data sheet

108

GeneralDensityWater AbsorptionRheologicalMelt Flow Rate (MFR)MechanicalTensile StrengthStrain at breakFlexural StrengthFlexural ModulusIzod Impact Strength Notched

Charpy Impact Strength, NotchedUnnotchedUnnotchedRockwell HardnessThermalVicat Softening Tempreture

Deflection temp. under load (annealed)Ceofficient of linear thermal expansionThermal Conductivity Moulding ShrinkageFlammabilityFlame behaviourGlow wire testElectricalSurface resistivityVolume resistivityDielectric strengthDielectric constant (relative permittivity)Dissipation factor

Properties Test Condition Test Methods Units


Density: 1.04F332

Main Features

• General purpose,

self-coloring

Main Applications

• Households • Small Appliances and white goods Vacuum Cleaners • Electrical components for civil and industrial applications

Keys: Packaged product should be protected from the atmosferic agents and stored out of direct sunlight NB: No Break /M: Matt - Digit following letter/M indicates increasing values of mattness

F332

Injection Moulding Grades

ISO 1183ASTM D 570

ISO 1133

ASTM D 638ASTM D 638ASTM D 790ASTM D 790ISO 180/4AISO 180/4AISO 180/4AISO 180/4AISO 180/1AISO 180/1ADIN 53453DIN 53453DIN 53453ISO 2039/2

ISO 306/A120ISO 306/B120ASTM D 648ASTM D 696ASTM C 177ISO 294.4

UL 94IEC 60695-2-1

IEC 60093IEC 60093IEC 60243IEC 60250IEC 60250

50 mm/min50 mm/min2 mm/min2 mm/min+23°C - thickness 3.2 mm0°C - thickness 3.2 mm- 20°C - thickness 3.2 mm- 40°C - thickness 3.2 mm+23°C - thickness 4 mm- 40°C - thickness 4 mm+23°C+23°C- 40°Cscale R

10 N - 120°C/h50 N - 120°C/h1.8 MPa - 120°C/h

thickness 1.5 mmthickness 3 mm

drydrydry1000 Hz - dry1000 Hz - dry

g/cm3%

g/10min

MPa%MPaMPaJ/mJ/mJ/mJ/mkJ/m²kJ/m²kJ/m²kJ/m²kJ/m²kJ/m²

ºCºCºC10 -5/ºCW/(Km)%

classºC

ohmohm*cmkV/mm

1.040.3

14

42606022501901251009014813NBNBR110

10710210190.170.4-0.6

HB650

10+1410+15303.115*10-³

Product data sheet




109


JAM Petrochemical CompanyTechnical Catalogue2019

Density: 1.04E332

Main Features

• Medium heat

resistance,goo flow,

good impact strength

Main Applications

• Automative Interior (Trim parts) • tiles • forms


E332


ISO 1183ASTM D 570

ISO 1133



UL 94IEC 60695-2-1



10 N - 120°C/h50 N - 120°C/h1.8 MPa - 120°C/h



g/cm3%

g/10min



classºC

ohmohm*cmkV/mm

1.040.3

10

4075622200190115908515812NBNBR111

10910410390.170.4-0.6

HB650

10+1410+15303.115*10-³

Product data sheet

110






Density: 1.04L322

Main Features

• Medium heat injection

moulding, high flow,

good thermal

stability during processing

Main Applications

• Domestic appliances thermal resistant items (front panels, frames etc.) Electrical sector


L322


ISO 1183ASTM D 570

ISO 1133



UL 94IEC 60695-2-1



10 N - 120°C/h50 N - 120°C/h1.8 MPa - 120°C/h



g/cm3%

g/10min



classºC

ohmohm*cmkV/mm

1.040.3

23

4520692350170100705013610NBNBR109

99969690.170.4-0.6

HB650

10+1410+15303.115*10-³

Product data sheet




111



Density: 1.04F232

Main Features

• General purpose,

high flow injection moulding

grade, good impact

resistance, excellent gloss

Main Applications

• Small and large • household appliances• vacuum cleaners• toys• telephones and consumer electronics


F232


ISO 1183ASTM D 570

ISO 1133



UL 94IEC 60695-2-1



10 N - 120°C/h50 N - 120°C/h1.8 MPa - 120°C/h



g/cm3%

g/10min



classºC

ohmohm*cmkV/mm

1.040.3

14

4520692350170100705013610NBNBR109

10710110290.170.4-0.6

HB650

10+1410+15303.115*10-³

Product data sheet

112






Density: 1.04B432/E

Main Features

• Sheets and

profile Medium

impact strength

Main Applications

• Plain or coextruded with high draw ratios for refrigeration, sanitary, automotive, packaging, housholding (profiles)


B432/E

Extrusion Moulding Grades

ISO 1183ASTM D 570

ISO 1133



UL 94IEC 60695-2-1



10 N - 120°C/h50 N - 120°C/h1.8 MPa - 120°C/h



g/cm3%

g/10min



classºC

ohmohm*cmkV/mm

1.040.3

4

454568230022016512510017912NBNBR110

10910410490.170.4-0.6

HB650

10+1410+15303.115*10-³

Product data sheet




113



Density: 1.04B532/E

Main Features

• Sheets and profile.

Good impact strength,

high toughness

Main Applications

• Plain or coextruded with high draw ratios for refrigeration, sanitary, automotive, packaging, housholding (profiles)


B532/E


ISO 1183ASTM D 570

ISO 1133



UL 94IEC 60695-2-1



10 N - 120°C/h50 N - 120°C/h1.8 MPa - 120°C/h



g/cm3%

g/10min



classºC

ohmohm*cmkV/mm

1.040.3

5

3545682300280190150125201016NBNBR110

10810410490.170.4-0.6

HB650

10+1410+15303.115*10-³

Product data sheet

114






Density: 1.04B732/E

Main Features

• Very high

impact strength

Main Applications

• Extrusion of thick sheets for sanitary and automotive applications


B732/E


ISO 1183ASTM D 570

ISO 1133



UL 94IEC 60695-2-1



10 N - 120°C/h50 N - 120°C/h1.8 MPa - 120°C/h



g/cm3%

g/10min



classºC

ohmohm*cmkV/mm

1.040.3

4.5

4545602200350300200140281220NBNBR103

10910410090.170.4-0.6

HB650

10+1410+15303.115*10-³

Product data sheet




115



Density: 1.04D232/M3

Main Features

• Low gloss, extrusion

Main Applications

• Extrusion/ coextrusion of sheets with matt surface, household profiles


D232/M3


ISO 1183ASTM D 570

ISO 1133



UL 94IEC 60695-2-1



10 N - 120°C/h50 N - 120°C/h1.8 MPa - 120°C/h



g/cm3%

g/10min



classºC

ohmohm*cmkV/mm

1.040.3

8

271004015501109080759.579NBNBR97

10610110190.170.4-0.6

HB650

10+1410+15303.115*10-³

Product data sheet

116






Density: 1.04C442

Main Features

• Heat resistance,

good flow and good

impact strength

Main Applications

• Automotive interior (extruded profiles, interior trim), exterior (grilles, mirrors)


C442


ISO 1183ASTM D 570

ISO 1133



UL 94IEC 60695-2-1



10 N - 120°C/h50 N - 120°C/h1.8 MPa - 120°C/h



g/cm3%

g/10min



classºC

ohmohm*cmkV/mm

1.040.3

6

434565230020016512510017912NBNBR110

11410810890.170.4-0.6

HB650

10+1410+15303.115*10-³

Product data sheet

117

Properties Test Methods Analytical Manual Units GeneralMooney ViscosityBound StyreneBlock styreneSolution viscosity*Gel contentMolecular weightCoupling efficiencyVolatile matter contentResidual solventColourSolution color (Pt/Co)Vinyl contentAsh contentSolvent extractablesPhysical Form

Packaging

MPP16MPP5-MPP6MPP8MPP9MPP12MPP1MPP1MPP10MPP18MPP13

MPP5-MPP6MPP15MPP11

ASTM D1646ASTM D5775ASTM D3314ASTM D5774

ASTM D5668

ASTM E313ASTM D1209

ASTM D5667ASTM D5774

ML1+4 @ 100°Cwt %wt %cPsarbitraryKDalton%wt %ppmYellow indexarbitrarywt % on butadienewt %wt %


SBS - SOL T6302

Main Applications

• Bitumen modification, particularly in road paving applications, in compounding fpr both footwear and technical goods, and in adhesive applications

Key Features

• Linear block copolymer, providing excellent mechanical properties, high strength and elasticity, combined with good dispersability and processability.

SOL T6302

Europrene

Pellet form

Bags on Pallet, Big bags and wooden crates

N/A29 – 33100N/AN/A95 - 12584 min1 max< 1010 maxN/A10.0 – 14.0N/AN/A

Product data sheet

118


Packaging


MPP5-MPP6MPP15MPP11


ASTM D5668

ASTM E313ASTM D1209




SBS - SOL T161B

Main Applications

• Bitumen modification for waterproofing membranes used in roofing and bridge insulation, road paving & pipe coating

Key Features

• block copolymer with radial moleculare structureexcellent mechanical properties, high strength and elasticity in a wide range of formulated products

SOL T161B

Europrene

Pellet form, Powder form


N/A29 - 33100N/AN/A220 - 26084 min1.0 max< 1010 maxN/A10.0 – 14.0N/AN/A

Product data sheet

119


Packaging


MPP5-MPP6MPP15MPP11


ASTM D5668

ASTM E313ASTM D1209




SBS - SOL T6306

Main Applications

• Bitumen modification in waterproofing systems, formulated compounds for shoe soles and technical goods

Key Features

• block copolymer designed for bitumen modification in waterproofing membranes applications. The grade imparts exellent mechanical properties and elasticity to the modified bitumen. The radial structure and the high styrene block content assures outstanding performance under service condition, particularly in the high temprature range

SOL T6306

Europrene

Pellet form, Powder form


N/A34 - 38100N/AN/A245 - 27585 min1 max< 1015 maxN/A10.0 – 14.0N/AN/A

Product data sheet

120


Packaging


MPP5-MPP6MPP15MPP11


ASTM D5668

ASTM E313ASTM D1209




SB - SOL B183

Main Applications

• SOL 183 is mainly used in plastic material (PS, ABS) modification.

Key Features

• Europrene SOL 183 is a dry solution styrene butadiene tapered block copolymer, polymerized using alkyl lithium catalyst. Its typical styrene content is 11% and vinyl (1,2 butadiene) content is 10%. The block styrene content is typically 5%. The polymer contains a non-staining antioxidant. It is produced in a batch polymerization process

SOL B183

Europrene

Bale (25Kg)

30-36 Bales in wooden crates

60 – 809.0 – 11.04 – 6N/AN/AN/AN/A0.75 maxN/AN/AN/A9.0 – 11.00.2 maxN/A

Product data sheet

121


Packaging


MPP5-MPP6MPP15MPP11


ASTM D5668

ASTM E313ASTM D1209




LCBR - Intene P30

Main Applications• Mainly used in bulk and suspension ABS process where low-cis polybutadiene (4-15%wt on the final product) with a low viscosity is required. The ability of the rubber domains to promote craze formation and shear yielding accounts for improved impact properties; crazing and shear yielding function as energy-dissipating processes that can inhibit the formation of a crack that would otherwise produce catastrophic failure. The star like structure of P30 guarantees a low value in viscosity and, contemporary, a molecular weight sufficiently high. The high capacity of loading carbon black and good extrudibility made this grade suitable for abrasion strips construction in tire building.

Key Features

• The star like structure of P30 guarantees value in viscosity and, contemporary, a molecular weight sufficiently high.the high capacity of loading carbon black and good extrudibility made this grade suita abrasion strips construction in tire building.

Intene P30

Bale (25Kg)


45 – 55N/AN/A35 - 504 maxN/AN/A0.75 maxN/AN/A10 max11 – 130.2 maxN/A

Intene

Product data sheet

122


Packaging


MPP5-MPP6MPP15MPP11


ASTM D5668

ASTM E313ASTM D1209




LCBR - BR245

Main Applications• BR 245 polybutadiene is used in tire compounds and in some mechanical good compounds. Good hysteresis properties of BR 245 allow it to be blended with natural rubber to produce enhanced properties in truck tire treads. The addition of polybutadiene low cis to natural rubber upgrades abrasion and cracking resistance, maintains good resilience and also provides better resistance to overcure and degradation during aging. BR 245 and SOL R 1204 were tried in blends with natural rubber in large size passengers tyre reducing groove cracking compared to natural rubber.Key Features• BR245 rubber is a solution polymerized low cis star branched, low coupled, dry polybutadiene produced using alkyl lithium initiator in batch reactors.

Key Features

• BR245 rubber is a solution polymerized low cis star branched, low coupled, dry polybutadiene produced using alkyl lithium initiator in batch reactors.

BR245

Bale (25Kg)


50 – 60N/AN/AN/AN/AN/AN/A0.6 maxN/AN/AN/A11 – 130.08N/A

Europrene

Product data sheet

123


Packaging


MPP5-MPP6MPP15MPP11


ASTM D5668

ASTM E313ASTM D1209




LCBR - BR 277

Main Applications

• BR 277 oil extended polybutadiene is used in tire compounds and in some mechanical good compounds.

Key Features

• BR277 rubber is a solution polymerized low cis star branched, low efficiency coupled, oil extended polybutadiene produced using alkyl lithium initiator in batch reactors.

BR 277

Bale (25Kg)


37 – 47N/AN/AN/AN/AN/AN/A0.3 maxN/AN/AN/A11 – 130.0426.3–29.3

Europrene

Documents

Address: first floor, No 27, Nezami St., Tavanir St ... · for create a balance between work and family life. It has moral value to improve satisfaction It has moral value to improve