Upload
others
View
10
Download
0
Embed Size (px)
Citation preview
AcuityConfiguration Guide
v9.1
Document Information• Ross Part Number: 4820DR-100-09.1• Release Date: October, 2019.The information contained in this document is subject tochange without notice or obligation.
Copyright©2019 Ross Video Limited, Ross®, Acuity®, OverDrive®,and any related marks are trademarks or registeredtrademarks of Ross Video Limited. All other trademarksare the property of their respective companies. PATENTSISSUED and PENDING. All rights reserved. No part ofthis publication may be reproduced, stored in a retrievalsystem, or transmitted in any form or by any means,mechanical, photocopying, recording or otherwise,without the prior written permission of Ross Video.While every precaution has been taken in the preparationof this document, Ross Video assumes no responsibilityfor errors or omissions. Neither is any liability assumedfor damages resulting from the use of the informationcontained herein.Microsoft®, Windows®, Windows XP®, and InternetExplorer® are either registered trademarks or trademarksof Microsoft Corporation in the United States and/orother countries.Macintosh®, and OS X® are trademarks of Apple Inc.,registered in the U.S. and other countries.Fedora® and the Infinity design logo are trademarks ofRed Hat, Inc.Oracle® and Java™ are registered trademarks of Oracleand/or its affiliates. Other names may be trademarks oftheir respective owners.Python™ and PyCon™ are trademarks or registeredtrademarks of the Python Software Foundation.Firefox® and Mozilla® are trademarks or registeredtrademarks of the Mozilla Foundation.Google® and Google Chrome™ and the Google logo areregistered trademarks of Google Inc.VESA® and DisplayPort™ are trademarks owned by theVideo Electronics Standards Association (VESA®) inthe United States and other countries.This product includes software developed by JordanRitter.Wireshark and the "fin" logo are registered trademarksof the Wireshark Foundation.
PatentsPatent numbers US 7,034,886; US 7,508,455; US7,602,446; US 7,802,802 B2; US 7,834,886; US7,914,332; US 8,307,284; US 8,407,374 B2; US8,499,019 B2; US 8,519,949 B2; US 8,743,292 B2; USD752,530 S; GB 2,419,119 B; GB 2,447,380 B; and otherpatents pending.
ii • Document Information — Acuity Configuration Guide (v9.1)
Contents
Feature Enhancements......................................5New Custom Controls.............................................................5New Personality Options.........................................................5
Virtual Panel Positioner Reset.................................5Knob List Expansion................................................5
RossTalk Updates...................................................................5Ultritouch.................................................................................5New Device Support................................................................5
Features...............................................................7Hot Swappable Boards............................................................7Analog/Tri-Level Reference Input............................................7Multi-Definition Serial Digital Inputs.........................................7Multi-Definition Serial Digital Outputs......................................8Media-Store.............................................................................8Media-Store Capture...............................................................8MultiViewer..............................................................................82D DVE...................................................................................9ME Effect System....................................................................9Half ME (Mix/DSK)..................................................................9AuxKey..................................................................................10UltraChrome..........................................................................10Color Correction....................................................................10High Dynamic Range (HDR) and Wide Color Gamut
(WCG) Conversion.........................................................10Preview Overlay....................................................................11
Center....................................................................11Mask Preview.........................................................11Safe Title................................................................11Source ID...............................................................11Time Clock.............................................................11VTR Timecode.......................................................11
Look Ahead Preview.............................................................11MultiPanel..............................................................................12SoftPanel...............................................................................12Custom Controls....................................................................12Memory Functions.................................................................12Effects Dissolve.....................................................................12GPI Control............................................................................12Live Edit Decision Lists.........................................................12Tallies and Contact Closures.................................................13Device Control.......................................................................13Technical Support..................................................................13Warranty and Repair Policy...................................................13
Product Comparison........................................14
Switcher Options and Configurations............15Control Panel Options...........................................................15
Standard Acuity® Control Panel.............................15Carbonite Black Control Panel...............................16Double-Down Acuity® Control Panel......................16
Acuity Rack Panel(AP-SERVER-PANEL)....................................16
Panel Row Delete..................................................16Panel Row Add......................................................16Redundant Power (Panel Only).............................17Auxiliary Control Panels.........................................17Ultritouch................................................................17Extended Warranty (Panel Only)...........................17Audio Control Module............................................18Shot Box Module....................................................18Extended Panel Tallies...........................................19Replacement Mnemonics
(AP-8MNEMONIC).........................................19Replacement Touchscreen Display
(AP-TOUCHSCREEN-A)................................19Replacement Control Panel Modules....................19Vision Control Panel Upgrade for Acuity®..............20
Frame Options.......................................................................20Acuity® Frame........................................................203G Video Inputs.....................................................2012G MultiProcessor Inputs.....................................2012G Outputs...........................................................20Evertz® IP I/O Blades.............................................20Reference with Tally
(ACU8-REFGPIOTALLYCC)...........................21MEs........................................................................21MultiViewers...........................................................213D DVE and 3D DVE Warp...................................23Port Expander........................................................23Device Support......................................................23Spare Parts Kit.......................................................24Critical Spare Boards Kit........................................24Redundant Power (Frame Only)............................24Additional Manuals.................................................24Extended Warranty (Frame Only)..........................24
Training and Commissioning Options...................................25Commissioning, 1-Day
(ACUITY-COM-1DAY)....................................25Online Training, 1-Day
(ACUITY-ONL-1DAY).....................................25Operations Training, 1-Day
(ACUITY-OTR-1DAY).....................................25Technical Training, 1-Day
(ACUITY-OTT-1DAY).....................................25
Specifications...................................................27Switcher Resources..............................................................27Rack Requirements...............................................................28Hardware Weights.................................................................28Operating Temperature.........................................................28System Timing.......................................................................28LTC Timecode Input..............................................................28Video Input Specifications.....................................................28Video Output Specifications..................................................28Power Rating.........................................................................29Serial Ports............................................................................29External Link Ports................................................................29GPI Ports...............................................................................30Tally Ports..............................................................................30Contact Closure Ports...........................................................31
Acuity Configuration Guide (v9.1) — Contents • iii
Ordering Codes................................................32
Panel Dimensions with Slot Locations...........36A1S/A1SDD...........................................................................36A2M/A2MDD.........................................................................36A2X/A2XDD...........................................................................36A3M/A3MDD.........................................................................37A3/A3DD...............................................................................37A4/A4DD...............................................................................38CB1.......................................................................................38CB2.......................................................................................38
Frame Dimensions...........................................394RU.......................................................................................398RU.......................................................................................39
iv • Contents — Acuity Configuration Guide (v9.1)
Feature EnhancementsA number of features have been added, or updated, tothis version of software. This section provides a briefintroduction to these features, and how to use them.
New Custom ControlsA number of custom controls have been added orexpanded.
RossTalkPress Insert Event >More > RossTalk.
DescriptionCommand
Turn a GPI on or off.• Press GPI and use the GPI knob to
select the GPI that you want to use.• Press State and use the State knob
to select whether to turn the GPI on(On or 1) or off (Off or 0).
GPI w/State
Audio MixerPress Insert Event > Special.
DescriptionCommand
Adjust the audio gain for a group. (LawoEmber+ only.)1. Use the Group knob to select the
audio group that you want to adjustthe gain for.
2. Use the Level knob to select the newgain level you want set for the group.
Audio Gain
New Personality OptionsThe following switcher personality options have beenadded or changed.
Virtual Panel Positioner ResetAllows you to specify whether the positioner on thevirtual panel returns to the neutral position automatically(On), or if you have to click the positioner to have itreturn to the neutral position (Off).Press HOME > Setup > Personality and use theOption knob to select Virt Panel Pos Reset.• On— positioner returns to the neutral position after
0.5 seconds.• Off— you must click on the positioner to have it
return to the neutral position.
Knob List ExpansionAllows the knob list you are scrolling to expand to thefull size of the area for a period of time. This allows youto see more of the list at one time.Press HOME > Setup > Personality and use theOption knob to select Knob List Expansion.• Rate— select the amount of time, in frames, that
the knob list stays expanded. Select 0 to have the listnot expand.
RossTalk UpdatesThe following commands have been added or updated.
Table 1: RossTalk Commands
DescriptionCommand
Set GPI xx to on (On or 1) oroff (Off or 0). For example,GPI 04:Off sets GPI 4 tooff.
GPI xx:On/Off
UltritouchThe 2RU rack mountable Ultritouch adaptable systemcontrol panel allows you to control some aspects ofswitcher operation using a DashBoard interface.The DashBoard interface on Ultritouch provides controlover aux bus source selections. You must connect to theswitcher fromUltritouch to be able to control the switcherfunctions. Refer to the Ultritouch documentation forinformation on navigating the Ultritouch menu andmanually connecting to a device.
New Device SupportThe following devices or commands/interfaces wereadded or updated for this version of software.
New Devices• Sony® BRC-1000• Panasonic® AW-RP120• Panasonic® AW-RP150• Panasonic® AW-UE150
New/Updated Commands• SendLoopExtraOption—an extra option has been
added to the AMP FlexClip driver to select whetherthe switcher sends loop commands to the server.
Acuity Configuration Guide (v9.1) — Feature Enhancements • 5
• Ping ExtraOption—an extra option has been addedto the RossTalk driver for controlling another switcher(RTalkSwitch) to send a ping after 10 minutes ofinactivity. This is designed to keep the connectionactive between the two devices so that networkmonitoring equipment don't close the connection.
• LawoGain—a custom control was added to controlthe audio gain for a group.
• LawoMapping—an option was addedwhen settingup the Lawo to select the type of channel (Input,Group, Aux, or VCA).
• RCP Panel Extra Option— an extra option hasbeen added to set the source mapping scheme usedby the RCP panel to either Pre-v7.1a or Post-v7.1a.
6 • Feature Enhancements — Acuity Configuration Guide (v9.1)
FeaturesThank you for considering a Ross Video Acuity®Production Switcher. The Acuity® is a completely newlarge switcher platform that takes Ross productionswitchers to the next level of performance and unleashesoperator creativity.
Hot Swappable BoardsThe boards and power supplies in the Acuity® framesare hot swappable. The resources, or sources providedby a board are lost when the board is removed.
Analog/Tri-Level Reference InputThe switcher supports both external and internal referencesources. The external reference can be an input from ahouse sync to the reference input BNC and back out thelooping reference output. Although tri-level sync isrecommended as your reference source for all HDapplications, analog black burst can be used whenoperating the switcher.
Table 2: Compatible Video Formats
Usable FormatInput Reference
480i480i
480i 16:9
720p 59.94Hz1
1080i 59.94Hz1
1080p 59.94Hz (A/B)2
UHDTV1 59.94Hz (UHD-2SI)3
576i576i
576i 16:9
720p 50Hz1
1080i 50Hz1
1080p 25Hz
1080p 50Hz (A/B)2
UHDTV1 50Hz (UHD-2SI)3
720p 50Hz720p 50Hz
720p 59.94Hz720p 59.94Hz
Usable FormatInput Reference
576i1080i 50Hz
576i 16:9
720p 50
1080i 50Hz
1080p 25Hz
1080p 50Hz (A/B)2
UHDTV1 50Hz (UHD-2SI)3
480i1080i 59.94Hz
480i 16:9
720p 59.94Hz
1080i 59.94Hz
1080p 29.97Hz
1080p 59.94Hz (A/B)2
UHDTV1 59.94Hz (UHD-2SI)3
1080p 60Hz1080i 60Hz
UHDTV1 60Hz (UHD-2SI)3
1080p 24Hz1080p 24Hz
1080pSF 23.98Hz1080pSF 23.98Hz
1080pSF 24Hz1080pSF 24Hz
Notes1 It is not recommended that you operate the switcher inthese video formats when you are using a composite sync(480i or 576i) reference signal. SMPTE® recommendsusing a tri level sync reference signal for high-definitionvideo.2 The 1080p 50Hz Level B and 1080p 59.94Hz Level Bvideo formats are only accepted by the MultiProcessorInput and 12G MultiProcessor Input boards where theyare converted to level A automatically.3Only theMultiProcessor Input and 12GMultiProcessorInput boards can process UHDTV1 UHD-2SI videosignals. Only the 12G MultiProcessor Input can processUHDTV1 UHD-2SI (single link) at 12Gb/s.
Multi-Definition Serial Digital InputsThe Acuity® frames come standard with a single VideoInput board providing 20 Multi-Definition SDI BNCinputs. Depending on the size of frame you have this canbe increased to either 60 or 120 BNCs.• 4RU – expandable from 20 to 40 or 60.• 8RU – expandable from 20 to 40, 60, 80, 100, or 120.
Acuity Configuration Guide (v9.1) — Features • 7
Multi-Definition Serial Digital OutputsThe Acuity® frames come standard with a single VideoOutput board providing 20 Multi-Definition SDI BNCoutputs. Depending on the size of frame you have thiscan be increased to either 40 or 60 BNCs.• 4RU – expandable from 20 to 40.• 8RU – expandable from 20 to 40 or 60.
Media-StoreMedia-Store allows you to load stills or animations fromthe hard drive and make them available as a source onthe switcher. The switcher provides two types ofmedia-store, ME-Store and Global-Store.The Global-Store consists of up to 4 dedicated channelsof media-store that are available as inputs to all MEs andAux Buses of the switcher. The fourth channel ofGlobal-Store can be enabled from the Personality menu(Global-Store 4 Mode). All channels can be usedindependently, or two can be tied together to provideseparate fill and alpha channels. The 4 Gigabytes ofGlobal-Store cache is provided from Frame CPU board.The ME-Store option consists of 4 channels ofmedia-store that are available as inputs to the ME theyhave been installed for and can be re-entered onto anyother ME in the switcher. Each ME can have 4independent channels of ME-Store. The 8 Gigabytes ofME-Store cache is provided from the 3GVideo Processorboard. If the ME is configured as a MultiViewer, theME-Stores for that ME are configured as MV-Stores(MultiViewer Stores) with the same functionality.In addition to the video channels of the Global-Store, anadditional set of audio channels are provided. The numberof audio channels matches the video channels and canbe increased from three to four from the Personalitymenu(Global-Store 4 Mode). Audio and Video playout areindependent from each other.
Media-Store CaptureStill images, animations and audio can be created fromany video signals available on the main preview or auxbus output. Captured media items can be of the entireimage, or of cropped sections of the image. Whencapturing a media item, you can preview and use whatwas captured before saving it do disk. You must save thecaptured media item to disk before performing anothercapture, or loading another media item into thatmedia-store channel, or the captured media item will belost.Audio is captured from the source video stream at thesame time as the video and is saved to a separate WAVfile.
The media-store can capture up to 3,000 frames, or upto 773 frames in full screen 3G/1080i. The number offrames that can be captured depends on the size of thecapture area, the video format you are capturing in,whether you are capturing alpha, and whether audio isincluded. All media-store channels must be empty to beable to use the full cache for the capture. The maximumcapture size is less if an alpha is included. If you do notneed to capture the entire screen, you can reduce the sizeof the capture area. This will also reduce the amount ofcache that is needed for the capture.
Note: You cannot capture a non-synced video source. Thecapture will time-out after 15 seconds.
MultiViewerThe switcher supports both a multi-headed videoprocessor MultiViewer and a single-headed inputMultiViewer. Both types of MultiViewer generatorsallow you to view up to 20 video sources in one of 41different grids and include mnemonic source names andred and green tallies on every box.• Video ProcessorMultiViewer—has access to every
input on the switcher, has four heads (A,B,C,D), andreplaces anME in the switcher. Each Video ProcessorMultiViewer can also be configured to provide 2floating 3D DVE keys that can be accessed from anyME on the switcher.
• Input MultiViewer— has access to only the inputsources fed into the MultiProcessor Input board, andis not available on the standard Video Input board.
Figure 1: MultiViewer Grids
8 • Features — Acuity Configuration Guide (v9.1)
2D DVEEach ME comes standard with 16 channels of advanced2DDVE (8 in UHDTV1) that can be used for performingover the shoulder or picture in picture shots with fullDVE key-framingwith smooth interpolation. This allowspreset pattern keys to be zoomed, cropped, a border oredge effect added, and repositioned horizontally andvertically to create the look you want, or you can use oneof the useful pre-built 2D effects to perform 2Dbackground transitions.
ME Effect SystemEach ME (Multi-level Effect) provides 8 advancedkeyers, dual border generator, pattern generators, keytrails, and utility buses.• Keyer— supporting matte fill, key invert, pattern
mask, box mask, garbage mask, self-key, linear key,and preset pattern key. The 2 UltraChrome advancedchroma keyers are standard for each ME and areavailable to each keyer.
• Dual BorderGenerator—provides border, shadow,and outline effects to the keyers with either hard orglowing edges. You can then move the border to anyposition on the screen - even above the key. Bordersare flown in real time with the joystick in the samemanner as wipe patterns andDVE effects. This bordergenerator was designed as a creative tool and it canadd an impressive visual impact to your keys.
• Pattern Generator— two advanced patterngenerators provide rotary wipes, matrix wipes, heart,star, spade, modulation, and pattern rotation. Twoadditional pattern generators are dedicated to colorwash generators. A single simple pattern generatoris available to each key.
• Trails— allows you to add trail effects to any keytype. Trail effects include Soft, Hard, Key, and KeySmear trails. Soft and Hard trails apply to the videoin the key, and Key and Key Smear trails apply tothe key itself. In the case of a shaped key, the trailsare only visible within the key itself if a Soft or HardTrail is used. Select a Key or Key Smear Trail if youneed the trails to appear outside of the key.
• Utility Bus— utility buses provide video-in-borderand garbage mask applications, as well as being usedfor the buses of the B-side of a split ME.
The number of MEs depends on the size of your frame,the number of MultiViewers installed, and the videoformat you are operating in. Each MultiViewer or MEoption uses the same hardware in the frame.• 4RU – expandable from 0 to 6 HD MEs.• 8RU – expandable from 0 to 8 HD MEs.
Half ME (Mix/DSK)Each switcher comeswith a half (0.5)ME that has limitedfunctionality compared to a full ME. The half ME isalways the highest number ME in the switcher andrequired no additional hardware.
Note: The Half ME option is not supported on the Evertz® IPOutput board or when the switcher is operating in a UHDTV1video format.
The number of keys depends on how theMix/DSK optionis set up. If Mix/DSK is set toMix2K there are 2 keysand if it is set toMix4K there are 4 keys. Both of theseoptions lock specific output BNCs to the video signalsbeing output by the Mix/DSK option.
OUTPUT
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Fully ConfigurableMix2K
PG
M
CLN
K2
CLN
K1
PV
PV
PG
M
Figure 2: Mix2K
OUTPUT
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Fully ConfigurableMix4K
PG
M
CLN
K2
CLN
K1
CLN
K3
CLN
K4
PV
PV
PG
M
PG
M
PG
M
Figure 3: Mix4K
Note: References to ME refer to a full ME unless otherwisestated.
Table 3: Half ME vs. Full ME Comparison
Full MEHalf ME
No (option)YesIncluded with Switcher
Yes (every oddnumber ME)
NoRequires AdditionalHardware
YesYesProgram Assignable toany Output BNC
YesNoProc Amps and ColorCorrectors
84Keyers
Auto Select, SelfKey, ChromaKey, Preset
Pattern Key, andDVE Key
Auto Select andSelf Key
Key Types
YesNo2D DVE
Dissolve, Cut,Wipe, and DVE
Dissolve and CutTransition Types
YesNoOutput can be Re-enteredto Another ME
YesNoDual Border Generators
YesNoAdvanced PatternGenerators
Acuity Configuration Guide (v9.1) — Features • 9
Full MEHalf ME
YesNo*ME-Store
YesYesGlobal-Store Access
Note: * You can re-enter an ME-Store onto the Half ME, butthere is no dedicated ME-Store for the ME.
AuxKeyThe AuxKey option can be used as either a simpleMixer(dissolve between two Aux buses) or a Mix/Keyer(simple mixer and Auto Select key). Output BNCs areassigned to an AuxKey in groups of four (4). The videosources fed out of these output BNCs is locked to theAuxKey outputs.
Note: The AuxKey option is not supported on the Evertz® IPOutput board or when the switcher is operating in a UHDTV1video format.
OUTPUT
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Aux Mixer
PG
M
Fully Configurable Aux Mixer/Key
PV
PG
M
CLE
AN
PV
PG
M
Figure 4: AuxKey ConfigurationsTable 4: AuxKey Output BNC Assignments
Aux Mix/KeyAux MixOutput BNC
ProgramProgram1
ProgramPreview2
Preview(configurable)3
Clean Feed(configurable)4
Mix or Key operations can be previewed, similar to anME.
Note: An AuxKey cannot pass or manipulate non-native videoformat signals. If you are using an Aux Bus as a videopass-through for a non-native video format signal, you cannotset up an AuxKey on that Aux Bus.
An AuxKey cannot be re-entered on another bus exceptby using an external loop. You must set the AuxKey upas a Pre-Mixer/Keyer if you are using an external loopto ensure that video timing is compensated for the loop.
UltraChromeTheUltraChrome chroma keyers uses patented advancedvideo processing technology to provide exceptional bluespill reduction and clean edges, even with difficult sourcematerial. Glass, smoke, translucent materials, and naturalshadows are handled superbly.
Chroma key shadows can either be extracted from thesource image or simulated using the optional bordergenerators.There are 2 floating Chroma Keys available to each MEand can be assigned to any keyer.
Color CorrectionColor correction is performed by either ProcessingAmplifiers (Proc Amps) in the HSL (Y-Cr-Cb) colorspace or by RGB Color Correctors in the RGB colorspace. Both Proc Amps and RGBColor Correctors allowyou to apply color correction to video sources on the flyto input video signals, entire buses, or aux bus outputs.• Input Based Correction— color correction is
applied to the video input regardless of which ME orAux Bus it is selected on. Input-based color correctionis not stored in switcher memories. Only supportedon the MultiProcessor Input board.
• ME Input Based Correction— color correction isapplied to all the video inputs to theME. Not requiredwith the MultiProcessor Input boards.
• ME Bus Based Correction— color correction isapplied to the output of the assigned bus. Unlike theother color correction types, bus-based colorcorrection is stored and recalled with memories. Thisallows you to include a color correction element aspart of an effects dissolve.
• Aux Bus Based Correction— color correction isapplied to the output of an Aux Bus. Like input-basedcolor correction, Aux Bus color correction is notstored in switcher memories.
Color correction is additive, allowing you to apply anycombination of Proc Amp and RGB Color Correctorbased adjustment to a video signal on the input, as wellas on the bus. If multiple color corrections are applied,the input-based correction is applied first, and thebus-based correction is applied after that.
HighDynamicRange (HDR) andWideColor Gamut (WCG) Conversion
The RGB color correctors are used to convert betweendifferent SDR andHDR ranges and between color gamuts(WCG).
Note: HDR andWCG input conversion is only supported on theMultiProcessor Input and 12G MultiProcessor Input boards.Output conversion is supported on any Video Output board.
HDR and WCG conversion can be applied on the fly toinput video signals, entire buses, or aux bus outputs.To configure the dynamic range and color gamutconversion of input sources you must set theMultiProcessor Input to amode that supports HDR/WCG
10 • Features — Acuity Configuration Guide (v9.1)
conversion. This will convert the input source to theformat that the switcher is operating in. Video signalscan again be converted for individual output BNCs.Supported Color Gamuts:• BT.709— color gamut recommended for HD video
signals.• BT.2020—wide color gamut recommended for
UHDTV1 video signals.Supported Dynamic Ranges• SDR— Standard Dynamic Range.• HLG—Hybrid Log Gamma.• PQ— Perceptual Quantizer.• S-Log3— Sony® S-Log3.
Preview OverlayThe Preview Overlay allows you to view informationsuch as Source ID, Safe Title area, and Time Clock onthe preview output. This information is layered over topof the preview video.
Note: If the Global-Store 4 Mode personality option is set toStill-Store, the preview overlay is not available.
Note: Preview Overlay is not available when the switcher isoperating in a UHDTV1 video format.
CenterThe Center element shows a crosshairs on the PreviewOverlay to indicate the center of the picture. The positionof the crosshairs can be adjusted and stored.
Mask PreviewThe PreviewMask overlay places a dotted outline aroundany active box mask, but cannot be applied to a patternmask. This function makes it easy to identify variousmasks, particularly when one may be placed near theedge of the screen.
Safe TitleThe Safe Title overlay shows guides for Safe Title, SafeAction, and Safe Text Size using the SMPTE standards.A number of pre-defined Safe ID setups are stored onthe switcher. The size and position of the elements forthese Safe ID setups can be adjusted and stored.
SafeAction
Safe Title
Minimum Text
Figure 5: Safe Title Overlay
Source IDThe Source ID element shows the name of the currenton-air video source, the transition type that is currentlyselected, and the video source that is taken on-air withthe next transition.The Program Source is displayed on the left, and showswhat is currently on-air and will be taken off-air with thenext transition. The Preview Source is displayed on theright and shows what will be taken on-air during the nexttransition.Between the Program Source and the Preview Source isthe Transition Type. The Transition Type shows the typeof transition that will be performed for the next transition.• D—Dissolve• W—Wipe• DE—DVE Wipe• SQ— Sequence
Time ClockThe Time Clock overlay shows a count-down, count-up,or count-down-then-up timer on the Preview Overlay.The Time Clock can be set up to start counting down, orup, on every transition, from a preset start time. This canbe tied to any ME, a particular ME, or a Fade to Blacktransition.
VTR TimecodeThe VTRTimecode overlay displays the timecode of theVTR, DDR, Video Server, or other external device thatis on-air and/or will be transitioned on-air. The devicemust be controlled from the switcher in order for thetimecode information to be available.By default, the timecode is red if it is on-air, yellow if itis selected, but not on-air, and gray if it is not selectedor on-air. Only two timecodes can be displayed at thesame time on the preview overlay.TheVTRTimecode overlay is made up of three elements,the video source of the clip, the on-air status, thetimecode of the clip, or time remaining in the clip. Thetimecode or the time remaining can be shown, dependingon how the VTR POL Displays features are set.
Look Ahead PreviewThis feature allows you to view different preview outputs,depending on whether or not the ME is on-air. LookAhead preview works differently than the standardPreview, as, instead of displaying the output of just theProgram or Preview, the output of the Look Aheadpreview changes depending on the on-air status of theME.
Acuity Configuration Guide (v9.1) — Features • 11
Any output BNC can be assigned as the Look Aheadpreview for an ME, except for the Program/Preset ME.The output of the Look Ahead preview depends onwhether the ME is on-air or not.• ME Off-Air— The Look Ahead preview displays
the Program output for the assignedME. This is whatis displayed when you take this ME to air.
• ME On-Air— The Look Ahead preview displaysthe Preview output for the assignedME. This is whatis taken to air if you transition this ME.
For example, if you have ME 4 on-air, the Look Aheadpreview monitors display the Program output for ME 1,ME 2 and ME 3. If you re-enter ME 3 into ME 4, theLook Ahead preview for ME 1 and ME 2 remainunchanged, but the Look Ahead preview forME 3 showsthe Preview output for ME 3.
MultiPanelYou can connect onemaster panel and up to eight satellitepanels to a single frame. Each of the control panels cancontrol some, or all, of the MEs. Only the Master Panelsupports all device control or OverDrive®.
SoftPanelSoftPanel allows you to run the menu system of theswitcher from a computer. The switcher treats theSoftPanel interface as a satellite panel, allowing it tocontrol all aspects of the switcher that the menu systemof a satellite panel can control.The SoftPanel application uses the Oracle® VMVirtualBox to interface with the computer hardware andoperating system, and connect to the switcher frame.
Tip: You can also point your Google Chrome™ browser to theSoftPanel to access the Acuity Virtual Panel.
Custom ControlsA custom control is a series of commands, or buttonpresses, that are recorded together into a single macro.When you run that custom control, the switcher runs allthe commands and button pressed that were recorded inthe macro. This allows you to simplify complexsequences of commands into simple button presses. Forexample, you can create a custom control that will recalla camera shot to preview, add a lower third, and thentransition the background and key on-air.The switcher supports up to 2304 custom controls.
Memory FunctionsA memory register is a snapshot of the current state ofthe switcher that can include multiple MEs. Up to 1,000
memory registers per ME can be stored and recalled onthe switcher. Each of these memory registers can storeas little as the information of one ME, or as much as thecurrent state of the entire switcher, including all MEs,Aux Buses, and DVE settings.
Effects DissolveAn Effects Dissolve allows you to have the switcher slewfrom one memory to another using a memory recall. Theswitcher will interpolate from the starting memory to thedestination memory, creating a smooth, two keyframeeffect.Only elements such as clip level, pattern position, andDVE settings can be interpolated in the effects dissolve.Other elements, such as key priority, crosspoint selection,pattern, and next transition data are recalled first, andthen the switcher will slew to the recalled memory.The speed at which an effects dissolve is performed iseither the Effect Rate. If you store an effects dissolve ina memory register, the effects dissolve rate stored withthat memory is used. The effects rate of the destinationmemory is used for any effects dissolve. You can set adefault effects dissolve rate that is used when an ME, orthe switcher, is defaulted. This rate does not override therate that is stored in the memory.
GPI ControlGeneral Purpose Interface (GPI) is a high/low voltagesignalling protocol that allows the switcher to send simplecommands to an external device, or receive commandsfrom a device. Each pin on the GPI is set as either high(+5 Volts), or low (0 Volts), and it is the switchingbetween high and low that sends commands to theexternal device, or to the switcher.The switcher has both fixed and configurable GPIs. The10 fixed GPI inputs and 10 fixed GPI outputs are locatedon the FrameCPU board. The 24GPIs on each Referencewith Tally board can be configured as either an input, oran output.
Live Edit Decision ListsEdit Decision Lists are files used by non-linear editing(NLE) suites to aid in post-production. Your switchercan capture EDL data in a file that you load into yourNLE suite.The switcher supports the CMX3600 format forrecording EDL files.
Note: The CMX3600 specification only supports a maximum of999 events per ME or aux bus. If another event occurs beyondthe 999 limit, a new file is created using the incremental filenumber.
12 • Features — Acuity Configuration Guide (v9.1)
Tallies and Contact ClosuresTallies and contact closures are simple open collectors(tallies) or relays (contact closures) that the switcher usesto signal other devices, and users, that a particular videosource is on-air. Typically, tallies are used to light a redlight on a camera to show people that they are on-air andwhat camera they should be looking at.You can only assign a single source to a tally/contactclosure, but you can assign multiple tallies/contactclosures to the same source.
Device ControlThe switcher can control a number of external devices,such as video servers and robotic cameras. For a completelist of supported devices, and information on how to setup and control these devices, visit the Ross Video website(help.rossvideo.com/acuity-device/).
Technical SupportAt Ross Video, we take pride in the quality of ourproducts, but if a problem does occur, help is as close asthe nearest telephone.Our 24-Hour Hot Line service ensures you have accessto technical expertise around the clock. After-salesservice and technical support are provided directly byRoss Video personnel. During business hours (easternstandard time), technical support personnel are availableby telephone. Outside of normal business hours and onweekends, a direct emergency technical support phoneline is available. If the technical support personnel whois on call does not answer this line immediately, a voicemessage can be left and the call will be returned shortly.Our Technical support staff are available to react to anyproblem and to do whatever is necessary to ensurecustomer satisfaction.
Warranty and Repair PolicyRoss Video Limited (Ross) warrants its switchers andrelated options, to be free from defects under normal useand service for a period of ONE YEAR from the date ofshipment. Fader handle assemblies are warranted for thelife of the product. If an item becomes defective withinthe warranty period Ross will repair or replace thedefective item, as determined solely by Ross.Warranty repairs will be conducted at Ross, with allshipping FOB Ross dock. If repairs are conducted at thecustomer site, reasonable out-of-pocket charges willapply. At the discretion of Ross, and on a temporary loanbasis, plug in circuit boards or other replacement partsmay be supplied free of charge while defective items
undergo repair. Return packing, shipping, and specialhandling costs are the responsibility of the customer.Software upgrades for switchers may occur from time totime, and are determined by Ross Video. The upgradesare posted on the Ross Video website, and are free ofcharge for the life of the switcher.This warranty is void if products are subjected to misuse,neglect, accident, improper installation or application,or unauthorized modification.In no event shall Ross Video Limited be liable for direct,indirect, special, incidental, or consequential damages(including loss of profit). Implied warranties, includingthat of merchantability and fitness for a particularpurpose, are expressly limited to the duration of thiswarranty.This warranty is TRANSFERABLE to subsequentowners, subject to Ross Video's notification of changeof ownership.
Acuity Configuration Guide (v9.1) — Features • 13
Product ComparisonTable 5: Acuity® Control Panel Comparison (Standard
Control Panel)
A4A3A3MA2XA2MA1S
403224322424CustomControlButtons
1087272727236Max. PanelTallies
433221Number ofRows
403224322424SourceButtons perRow
1609672644824Max. SourceButtons
Table 6: Acuity® Control Panel Comparison(Double-Down Control Panel)
A4DDA3DDA3MDD
A2XDD
A2MDD
A1SDD
372921292121CustomControlButtons
1087272727236Max. PanelTallies
433221Number ofRows
383022302222SourceButtons perRow
1529066604422Max. SourceButtons
Table 7: Carbonite Black Control Panel Comparison
CB2CB1
1616Custom Control Buttons
00Max. Panel Tallies
21Number of Rows
1616Source Buttons per Row
3216Max. Source Buttons
Table 8: Frame Comparison
8RU4RU
5834Max. GPI Inputs or Outputs
7236Max. Frame Tallies
2412Max. Contact Closures
8RU4RU
86Max. ME2 or MultiViewer1
12060Max. Video Inputs2
6040Max. Video Outputs2
Notes:1 The ME and MultiViewer options use the samehardware and cannot both be active at the same time. Forexample,ME 1 andMultiViewer 8 use the same hardwareand cannot both be on at the same time.2 If the switcher is operating in a UHDTV1 video format,the maximum number of MEs and video inputs andoutputs is reduced. The corrected numbers are shown inthe table.
14 • Product Comparison — Acuity Configuration Guide (v9.1)
Switcher Options andConfigurations
A typical switcher configuration includes a control panel,a frame, and the resources and features you wantinstalled. For example, the following options create aswitcher with an A2X control panel with redundantpower, a 4RU frame with 3 MEs, 40 video inputs, 20video outputs, 108 panel tallies, and redundant power,plus a 3-year extended warranty on both the panel andframe, an Auxiliary Control Panel, and 2 days ofcommissioning.
Qty.CodeDescriptionOption
1A2X-PANELThe A2X controlpanel.
A2X Panel
1ACU4-FRAME-NOIOThe 4RU frame withno Video Input orVideo Outputboards.
4RU Frame
1A2XP-REDPSUAdds a redundantpower supply for theA2X control panel.
RedundantPower -Panel
1ACU4-REDPSUAdds a redundantpower supply for the4RU frame.
RedundantPower -Frame
1ACU4-ME1Adds the ME 1option.
ME 1
1ACU4-ME2Adds the ME 2option.
ME 2
1ACU4-ME3Adds the ME 3option.
ME 3
2ACU4-MULTIPROC12G-IN
Adds two 12GMultiProcessor Inputboards with 20 inputBNCs each.
12GMultiProcessorInput board
1ACU4-12G-OUTAdds a 12G Outputboard with 20 outputBNCs.
12G Outputboard
1AP-TALLY-72Adds tally optionsup to 72 tallies.
ControlPanelTallies,36-72
1AP-TALLY-108Adds tally optionsup to 108 tallies.
ControlPanelTallies,73-108
2A2XP-ROSSCAREAdds two additionalyears to thestandard 1-yearwarranty on thepanel.
ExtendedWarranty(Panel)
Qty.CodeDescriptionOption
2ACU4-ROSSCARE-ME3
Adds two additionalyears to thestandard 1-yearwarranty on the4RU frame with 3MEs.
ExtendedWarranty(Frame)
1AP-AUX2RU32Adds the AuxiliaryControl Panel(Backsplash) thathas the samenumber of sourcebuttons as the A2Xcontrol panel.
AuxiliaryControlPanel
3ACUITY-COM-1DAYAdds 3-days ofon-sitecommissioning ofyour new switcher.
Commissioning
Control Panel OptionsThese options apply to the Acuity® control panel.
Standard Acuity® Control PanelAny Acuity® control panel can be matched with eitherAcuity® frame and have full access to all the features thatare available from the frame. The size of the control panelonly limits the number of source buttons, panel rows,and tallies, and the placement of modules.
DescriptionOption
A single panel row with 24 source andcustom control buttons, VESAmountable touchscreen display, USBports for keyboard or mouse control,1,000 switcher memories, previewoverlay, 36 parallel tally outputs,panel glow and user defined buttoncolor schemes, and 1-yeartransferable warranty with lifetimefader handle warranty.
A1S-PANEL
The same features as the previouspanel, but with two panel rows with24 source and custom control buttonseach.
A2M-PANEL
The same features as the previouspanel, but with two panel rows with32 source and custom control buttonseach.
A2X-PANEL
The same features as the previouspanel, but with three panel rows with24 source and custom control buttonseach.
A3M-PANEL
The same features as the previouspanel, but with three panel rows with32 source and custom control buttonseach.
A3-PANEL
Acuity Configuration Guide (v9.1) — Switcher Options and Configurations • 15
DescriptionOption
The same features as the previouspanel, but with four panel rows with40 source and custom control buttonseach.
A4-PANEL
Carbonite Black Control PanelSupport has been added for someCarbonite Black controlpanels. AnARP can be using to provide themenu system.
DescriptionOption
A single panel row with 16 source andcustom control buttons, 4 key selectand transition buttons, and a singletransition area.
AP-CB1-PANEL
The same features as the CB1 panel,but with 2 panel rows.
AP-CB2-PANEL
Double-Down Acuity® Control PanelAny Acuity® control panel can be matched with eitherAcuity® frame and have full access to all the features thatare available from the frame. The size of the control panelonly limits the number of source buttons, panel rows,and tallies, and the placement of modules.
DescriptionOption
A single panel row with 22 sourcebuttons and 21 custom controlbuttons, VESA mountabletouchscreen display, USB ports forkeyboard or mouse control, 1,000switcher memories, preview overlay,36 parallel tally outputs, panel glowand user defined button colorschemes, and 1-year transferablewarranty with lifetime fader handlewarranty.
A1SDD-PANEL
The same features as the previouspanel, but with two panel rows with22 source buttons and 21 customcontrol buttons each.
A2MDD-PANEL
The same features as the previouspanel, but with two panel rows with30 source buttons and 29 customcontrol buttons each.
A2XDD-PANEL
The same features as the previouspanel, but with three panel rows with22 source buttons and 21 customcontrol buttons each.
A3MDD-PANEL
The same features as the previouspanel, but with three panel rows with30 source buttons and 29 customcontrol buttons each.
A3DD-PANEL
DescriptionOption
The same features as the previouspanel, but with four panel rows with38 source buttons and 37 customcontrol buttons each.
A4DD-PANEL
Acuity Rack Panel (AP-SERVER-PANEL)The Acuity Rack Panel (ARP) server provides thehardware to host the Acuity Virtual Panel which is abrowser based virtual representation of anAcuity® controlpanel with menu system. The Acuity Rack Panel replacesthe need for the control panel, with the exception of nothaving any of the ports (Remote and Tally) that arepresent on the back of the control panel, and is upgradedin the same way as a normal panel.The tally ports on the frame can be used instead of thepanel tallies.
Panel Row DeleteThis option removes the top row of crosspoint and controlmodules from the control panel. This gives you theexpandability you will need for the future without theinitial cost.This option can only be included when ordering yourstandard control panel, and is not available for theDouble-Down control panels.
DescriptionOption
Removes the top row of modules fromthe A2M control panel.
A2MP-ROW-DEL
Removes the top row of modules fromthe A2X control panel.
A2XP-ROW-DEL
Removes the top row of modules fromthe A2XDD control panel.
A2XDDP-ROW-DEL
Removes the top row of modules fromthe A3M control panel.
A3MP-ROW-DEL
Removes the top row of modules fromthe A3 control panel.
A3P-ROW-DEL
Removes the top row of modules fromthe A4 control panel.
A4P-ROW-DEL
Panel Row AddThis option adds the top row of crosspoint and controlmodules to the control panel that were removed with thePanel Row Delete option.
DescriptionOption
Adds the top row of modules to theA2M control panel.
A2MP-ROW-ADD
16 • Switcher Options and Configurations — Acuity Configuration Guide (v9.1)
DescriptionOption
Adds the top row of modules to theA2X control panel.
A2XP-ROW-ADD
Adds the top row of modules to theA2XDD control panel.
A2XDDP-ROW-ADD
Adds the top row of modules to theA3M control panel.
A3MP-ROW-ADD
Adds the top row of modules to theA3 control panel.
A3P-ROW-ADD
Adds the top row of modules to theA4 control panel.
A4P-ROW-ADD
Redundant Power (Panel Only)The redundant power option adds an additional powersupply to the control panel. In the event that one powersupply should fail, or the power to that supply isinterrupted, the other power supply carries the load ofthe control panel.
DescriptionOption
Adds redundant power to the A1Scontrol panel.
A1SP-REDPSU
Adds redundant power to the A2Mcontrol panel.
A2MP-REDPSU
Adds redundant power to the A2Xcontrol panel.
A2XP-REDPSU
Adds redundant power to the A3Mcontrol panel.
A3MP-REDPSU
Adds redundant power to the A3control panel.
A3P-REDPSU
Adds redundant power to the A4control panel.
A4P-REDPSU
Adds redundant power to the CB1control panel.
PSU-12V16A-6PIN
Adds redundant power to the CB2control panel.
PSU-12V16A-6PIN
Auxiliary Control PanelsThe Auxiliary Control Panel is designed to extend thecontrol surface of your Acuity® control panel byproviding access to another source bus that can be quicklyassigned to any aux bus on the switcher. AdditionalAuxiliary Control Panels can be daisy-chained togetherfrom the same external link port on the control panel.The maximum number of Auxiliary Control Panels thatcan be daisy-chained together depends on the size of theAuxiliary Control Panel.• AP-AUX2RU24 – up to 6 daisy-chained together• AP-AUX2RU32 – up to 6 daisy-chained together
• AP-AUX2RU40 – up to 4 daisy-chained togetherThe Auxiliary Control Panel is a self contained unit thathas both primary and redundant power supplies. It isdesigned to mount either on the back of the control panelor into a desk.
Table 9: Auxiliary Control Panel
DescriptionOption
Adds the Auxiliary Control Panel witha single panel row with 24 sourcebuttons, 6 bank select and 8 auxbuttons, and 14 control buttons. Fitsthe A1S, A2M, and A3M controlpanels.
AP-AUX2RU24
The same features as the previouspanel, but with 32 source buttons. Fitsthe A2X and A3 control panels.
AP-AUX2RU32
The same features as the previouspanel, but with 40 source buttons. Fitsthe A4 control panels.
AP-AUX2RU40
Adds a redundant power supply forthe Auxiliary Control Panel Panel.
PSU-12V4A-2PIN
UltritouchThe 2RU rack mountable Ultritouch adaptable systemcontrol panel allows you to control some aspects ofswitcher operation using a DashBoard interface.The DashBoard interface on Ultritouch provides controlover aux bus source selections. You must connect to theswitcher fromUltritouch to be able to control the switcherfunctions. Refer to the Ultritouch documentation forinformation on navigating the Ultritouch menu andmanually connecting to a device.
Table 10: Auxiliary Control Panel
DescriptionOption
Adds the 2RU Ultritouch adaptablesystem control panel.
ULTRITOUCH-2
Adds a redundant power supply forUltritouch.
ULTRITOUCH-PS
Extended Warranty (Panel Only)Extends the standard one-year warranty on your controlpanel by one year. Additional years can be purchased ifrequired.
Acuity Configuration Guide (v9.1) — Switcher Options and Configurations • 17
DescriptionOption
Extends the warranty on the A1S bya year.
A1SP-ROSSCARE
Extends the warranty on the A1SDDby a year.
A1SDDP-ROSSCARE
Extends the warranty on the A2M bya year.
A2MP-ROSSCARE
Extends the warranty on the A2MDDby a year.
A2MDDP-ROSSCARE
Extends the warranty on the A2X bya year.
A2XP-ROSSCARE
Extends the warranty on the A2XDDby a year.
A2XDDP-ROSSCARE
Extends the warranty on the A3M bya year.
A3MP-ROSSCARE
Extends the warranty on the A3MDDby a year.
A3MDDP-ROSSCARE
Extends the warranty on the A3 by ayear.
A3P-ROSSCARE
Extends the warranty on the A3DDby a year.
A3DDP-ROSSCARE
Extends the warranty on the A4 by ayear.
A4P-ROSSCARE
Extends the warranty on the A4DDby a year.
A4DDP-ROSSCARE
Extends the warranty on the CB1 bya year.
CB1-PANEL-ROSSCARE
Extends the warranty on the CB2 bya year.
CB2-PANEL-ROSSCARE
Audio Control ModuleThe Audio Control module provides eight motorizedaudio faders with source mnemonics that can be mappedto audio channels, or groups, from an audio mixercontrolled by the switcher.
AUDIO CONTROL
When ordering a module with a new control panel, youmust specific the empty slot on the control panel that youwant the module installed into. Refer to PanelDimensions with Slot Locations on page 36 for slotlocations.
DescriptionOption
Installs the Audio Control module inslot 1 of your control panel. Can onlybe ordered with a new control panel.
AP-AUDIO-SL1
Installs the Audio Control module inslot 2 of your control panel. Can onlybe ordered with a new control panel.
AP-AUDIO-SL2
Installs the Audio Control module inslot 3 of your control panel. Can onlybe ordered with a new control panel.
AP-AUDIO-SL3
Provides the Audio Control moduleas a field upgrade kit. Can only beordered for an existing control panelinstallation.
AP-AUDIO-UPG
Provides the Audio Control module ina SideBoxNet enclosure. TheSideBoxNet enclosure allows you tomount a single module separate fromyour control panel. Each enclosurehas independent primary andsecondary power supplies and anethernet port to connect the enclosureto your switcher.
AP-SIDESLIDE-E
Shot Box ModuleThe Shot Box module provides an additional 28assignable custom control buttons. CustomControls fromvarious banks can be grouped together on a single ShotBox Page. Each Shot Box can access up to 28 pages ofbuttons.
CUSTOM CONTROL SHOT BOX
When ordering a module with a new control panel, youmust specific the empty slot on the control panel that youwant the module installed into. Refer to PanelDimensions with Slot Locations on page 36 for slotlocations.
DescriptionOption
Installs the Shot Box module in slot 1of your control panel. Can only beordered with a new control panel.
AP-SHOTBOX-SL1
Installs the Shot Box module in slot 2of your control panel. Can only beordered with a new control panel.
AP-SHOTBOX-SL2
Installs the Shot Box module in slot 3of your control panel. Can only beordered with a new control panel.
AP-SHOTBOX-SL3
18 • Switcher Options and Configurations — Acuity Configuration Guide (v9.1)
DescriptionOption
Provides the Shot Box module as afield upgrade kit. Can only be orderedfor an existing control panelinstallation.
AP-SHOTBOX-UPG
Provides the Shot Box module in aSideBoxNet enclosure. TheSideBoxNet enclosure allows you tomount a single module separate fromyour control panel. Each enclosurehas independent primary andsecondary power supplies and anethernet port to connect the enclosureto your switcher.
AP-SIDESHOT-E
Extended Panel TalliesThe control panel comes with 36 tally relays. Additionaltallies can be added in 36-tally increments. Themaximumnumber of tallies that can be added depends on the modelof control panel. Each tally option only adds 36 additionaltallies. If you want 108 tallies, you must order the 72 and108 tallies options.
DescriptionOption
Installs 36 additional tallies to allcontrol panels for a total of 72 tallies.
AP-TALLY-72
Installs 36 additional tallies to the A4control panel for a total of 108 tallies.
AP-TALLY-108
Replacement Mnemonics (AP-8MNEMONIC)In the event that the mnemonics on one of yourCrosspoint modules needs to be replaced, this optionprovides a replacement kit with an 8-mnemonic boardand installation instructions.
Replacement Touchscreen Display(AP-TOUCHSCREEN-A)
A replacement touchscreen display kit can be ordered asa field replacement of the touchscreen display that comeswith the control panel. You cannot use more than onetouchscreen display at the same time.
Replacement Control Panel ModulesReplace an existing module that came installed in yourcontrol panel.Use the same module ordering code for all sizes ofcontrol panels.
SEL
RECALL
BANK ENTER
KE YSON LY
EFFDISS
STORE
MERATE
KEYRATE
MEMORY
RECALL STORE
7 8 9
4 5 6
1 2 3
0
EFFRATE
ATTRIB
7 8 9
4 5 6
1 2 3
RUN CC+/- 0 .
BANK CLEAR ENTER
ME2
ALL
ME1
RECALLCLIP/CC
ALL
ME4
ME3
ME1
ME2
ME4
ME3
FADERATE
+4
MERATE
EFFRATE
KEYRATE
UNDO
ATTRIB
KE YSON LY
EFFDISS
GLOBA L MEMORY
RECALL STORE
CUT CUT CUT CUT CUT CUT CUT CUT
MASK
SEL SEL SEL SEL SEL SEL SEL SEL
SELFKEY
AUTOSELECT
CH ROMAKEY
PSTPATT
MATTEFILL
KEYMEM
KEYINV
FLYKEY
CHNLMGMT
BORDON
BORDOFF
SH OWALPHA
KEYPV
KEYERS
1 2 3 4 5 6 7 8
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
CUT CUT CUT CUT CUT CUT CUT CUT
MASK
SEL SEL SEL SEL SEL SEL SEL SEL
SELFKEY
AUTOSELECT
CH ROMAKEY
PSTPATT
MATTEFILL
KEYMEM
KEYINV
FLYKEY
CHNLMGMT
BORDON
BORDOFF
SH OWALPHA
KEYPV
KEYERS
1 2 3 4 5 6 7 8
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
HOME
UPONE
HOLD
TOPMENU
MENU KEYPAD
LINK
HOLD
CLEAR
POSITIONER
PGMSRC PVME 4 +4ME 3ME 2ME 1
PREVIEW
SAFETEXT
HIDEOVLY
MASKPV
TIMECLOCK
CENTERSAFETITLE
VTRTC
SOU RCEID
MONITORING
CUT FADE
FADE TO BLACK
FRAMES USB
KEY 5 KEY 6 KEY 7
PSTBKGD
TRANSPV
KEYPRIOR
TRANSLIMIT
DISS WIPE DVE SEQ
KEY 8
BKGD KEY 1 KEY 2 KEY 3 KEY 4
USER
MEDIA
ROLLCLIP
TRANSITION
FRAMES
CUT AUTOTRANS
KEY 5 KEY 6 KEY 7
PSTBKGD
TRANSPV
KEYPRIOR
TRANSLIMIT
DISS WIPE DVE SEQ
KEY 8
BKGD KEY 1 KEY 2 KEY 3 KEY 4
USER
MEDIA
ROLLCLIP
TRANSITION
FRAMES
CUT AUTOTRANS
SEL
AP-MENUMOD
AP-KEYER8MOD
AP-XPTCCMODDISP AP-GLBMEMMOD
AP-POSHALFAP-XPTCCMOD
AP-TRANS8MOD
DescriptionOption
A replacement 8-Key Keyer module.AP-KEYER8MOD
A replacement 8-Key Transitionmodule.
AP-TRANS8MOD
A replacement Crosspoint Busmodule. This module is only used onthe upper rows of the control panel.
AP-XPTMOD
A replacement Double-DownCrosspoint Bus module. This moduleis only used on the upper rows of thecontrol panel.
AP-DD-XPTMOD
A replacement Crosspoint Busmodule with display. This module inonly used in the right-most position ofthe upper rows of the control panel.
AP-XPTMODDISP
A replacement Double-DownCrosspoint Bus module with display.This module in only used in theright-most position of the upper rowsof the control panel.
AP-DD-XPTMODDISP
A replacement Crosspoint/CustomControl Bus module. This module isonly used on the bottom row of thecontrol panel.
AP-XPTCCMOD
A replacement Double-DownCrosspoint/Custom Control Busmodule. This module is only used onthe bottom row of the control panel.
AP-DD-XPTCCMOD
A replacement Crosspoint/CustomControl Bus module with display. Thismodule in only used in the right-mostposition of the bottom row of thecontrol panel.
AP-XPTCCMODDISP
A replacement Double-DownCrosspoint/Custom Control Busmodule with display. This module inonly used in the right-most position ofthe bottom row of the control panel.
AP-DD-XPTCCMODDISP
A replacement Global Memorymodule. Only one module of this typecan be installed in the control panel.
AP-GLBMEMMOD
A replacement Menu Keypadmodule.Only one module of this type can beinstalled in the control panel.
AP-MENUMOD
Acuity Configuration Guide (v9.1) — Switcher Options and Configurations • 19
DescriptionOption
A replacement Positioner module.Only one module of this type can beinstalled in the control panel.
AP-POSHALF
Vision Control Panel Upgrade for Acuity®
Using the Vision control panel with Acuity® requires theaddition of the Acuity® Menu module and touchscreento your existing control panel. The existing Visiontouchscreen is not compatible with Acuity®.Depending on the size of Vision control panel you have,youmay not have space for theMenumodule inside yourcontrol panel. An external version with theMenumoduleinstalled in a SideBox is available for all control panels.
DescriptionOption
Adds a Menu module that is to beinstalled into an empty slot on thecontrol panel and the Acuity®
touchscreen display.
AP-VISION-MENU-UPG
Adds a Menu module that ispre-installed into a SideBox and theAcuity® touchscreen display.
AP-VISION-MENU-EXT-UPG
Frame OptionsThese options apply to the Acuity® frames.
Acuity® FrameAny Acuity® frame can be matched with any Acuity®control panel. The size of the frame set the maximumnumber of MEs, MultiViewers, video inputs, and videooutputs you can have.
DescriptionOption
A 4RU frame with support for up to 6MEs or 6 MultiViewers, 60 videoinputs, and 40 video outputs. Thefames comes with no video input oroutput boards.
ACU4-FRAME-NOIO
A 8RU frame with support for up to 8MEs or 8 MultiViewers, 120 videoinputs, and 60 video outputs. Thefames comes with no video input oroutput boards.
ACU8-FRAME-NOIO
3G Video InputsEach 3G Video Input option adds a Video Input boardwith 20 input BNCs into the back of the frame.Both frames come with a single Video Input board asstandard.
• 4RU— 2 × ACU4-IN20 for a total of 60 BNCs• 8RU— 5 × ACU8-IN20 for a total of 120 BNCs
12G MultiProcessor InputsEach 12GMultiProcessor Input board provides the samefunctionality as theMultiProcessor Input board, with theaddition of being able to process 12Gb/s Single-LinkUHD-2SI and 3Gb/s Quad-Link UHD-2SI/UHD-QSDsignals at 50Hz, 59.94Hz, and 60Hz.• 4RU— 3 × ACU4-MULTIPROC12G-IN for a total
of 60 inputs• 8RU— 6 × ACU8-MULTIPROC12G-IN for a total
of 120 inputs
Note: UHDTV1 12Gb/s sources reduce the number of inputsfor each board. Each 12Gb/s input uses 4 input BNCs, eventhough there is only a single cable connection.
12G OutputsEach 12G Output board provides 20 SDI output BNCsas well as video processing capabilities for framesynchronizers and format conversion (FSFC).The 12G Outputboard can process all SD and HD videosignals, as well as 12Gb/s Single-Link UHD-2SI and3Gb/s Quad-Link UHD-2SI/UHD-QSD signals at 50Hz,59.94Hz, and 60Hz.• 4RU—2 × ACU4-12G-OUT for a total of 40 BNCs• 8RU—3 × ACU8-12G-OUT for a total of 60 BNCs
Note: UHDTV1 12Gb/s outputs reduce the number of outputsfor each board. Each 12Gb/s output uses 4 output BNCs, eventhough there is only a single cable connection.
Evertz® IP I/O BladesThe Evertz® IP Input and Evertz® IP Output blades bringsupport for the ASPEN protocol and SMPTE 2022-6 intothe Acuity® frame. The Evertz® IP Input blade has 6 10GSFPs with another 6 redundant 10G SFPs and 21 SDIDIN 1.0/2.3 connectors. The Evertz® IP Output bladehas the same configuration as the Evertz® IP Input blade,but with 20 SDI DIN 1.0/2.3 connectors. Both bladesinstall into the video input and output slots at the backof the frame and replace the Video Input, Video Output,orMultiProcessor Input boards. The switcher can addressany combination of the SFPs and DIN 1.0/2.3 connectorsto make up the 20 inputs to the crosspoint from thatblade.The SFPs andDIN 1.0/2.3 connectors on both the Evertz®IP Input and Evertz® IP Output blades are configuredand assigned to inputs and outputs of the switcher usingthe Evertz® MAGNUM unified control system.
20 • Switcher Options and Configurations — Acuity Configuration Guide (v9.1)
DescriptionOption
Evertz® IP Input blade for Acuity® 8RUframe
ACU8-EXEIP-IN
Evertz® IP Input blade for Acuity® 4RUframe
ACU4-EXEIP-IN
Evertz® IP Output blade for Acuity®
8RU frameACU8-EXEIP-OUT
Evertz® IP Output blade for Acuity®
4RU frameACU4-EXEIP-OUT
Referencewith Tally (ACU8-REFGPIOTALLYCC)This board provides an additional reference loop, 24 GPIsthat can be assigned as inputs or outputs, 36 tallies, and12 contact closures.A single Reference with Tally comes standard with boththe 4RU and 8RU frames. One additional board can beadded to the 8RU frame.
MEsThe switcher comes with a half (0.5) MEs as standardthat does not require any additional hardware, but haslimited functionality. Every odd numbered ME optionadds a 3G Video Processor board with the hardware tosupport the ME option.ME options must be added in order starting with ME 1(ACU4-ME1 or ACU8-ME1).
Note: If you want to operate the switcher in a UHDTV1 videoformat, it takes two ME options to provide a single UHDTV1 ME.
Note: The ME and MultiViewer options use the same hardwareand cannot both be active at the same time. For example, ME1 and MultiViewer 8 use the same hardware and cannot bothbe on at the same time.
Table 11: 4RU Frame Options
DescriptionOption
Adds ME 1, providing 8 keyers, 16channels of 2D DVE, 4 channels ofME-Store, and a dual bordergenerators with advanced key trailsand key smear. This option cannot becombined with the ACU4-MV6 option.
ACU4-ME1
Adds ME 2 with the same features asabove. This option cannot becombined with the ACU4-MV5 option.
ACU4-ME2
Adds ME 3 with the same features asabove. This option cannot becombined with the ACU4-MV4 option.
ACU4-ME3
Adds ME 4 with the same features asabove. This option cannot becombined with the ACU4-MV3 option.
ACU4-ME4
DescriptionOption
Adds ME 5 with the same features asabove. This option cannot becombined with the ACU4-MV2 option.
ACU4-ME5
Adds ME 6 with the same features asabove. This option cannot becombined with the ACU4-MV1 option.
ACU4-ME6
Table 12: 8RU Frame Options
DescriptionOption
Adds ME 1, providing 8 keyers, 16channels of 2D DVE, 4 channels ofME-Store, and a dual bordergenerators with advanced key trailsand key smear. This option cannot becombined with the ACU8-MV8 option.
ACU8-ME1
Adds ME 2 with the same features asabove. This option cannot becombined with the ACU8-MV7 option.
ACU8-ME2
Adds ME 3 with the same features asabove. This option cannot becombined with the ACU8-MV6 option.
ACU8-ME3
Adds ME 4 with the same features asabove. This option cannot becombined with the ACU8-MV5 option.
ACU8-ME4
Adds ME 5 with the same features asabove. This option cannot becombined with the ACU8-MV4 option.
ACU8-ME5
Adds ME 6 with the same features asabove. This option cannot becombined with the ACU8-MV3 option.
ACU8-ME6
Adds ME 7 with the same features asabove. This option cannot becombined with the ACU8-MV2 option.
ACU8-ME7
Adds ME 8 with the same features asabove. This option cannot becombined with the ACU8-MV1 option.
ACU8-ME8
MultiViewersThe switcher does not come with any MultiViewers asstandard. Every odd numberedMultiViewer option addsa 3GVideo Processor board with the hardware to supportthe MultiViewer option.The MultiViewer option can either be ordered as astandaloneMultiViewer or aMultiViewer with 2 floating3D DVE keys. The floating 3D DVEs are available toevery ME in the switcher. Only the first 4 MultiVieweroptions can include the floating 3D DVE.
Tip: Any ME can be turned into a MultiViewer at no additionalcost, but at the loss of the ME.
MultiViewer options must be added in order starting withMultiViewer 1 (ACU4-MV1 or ACU8-MV1).
Acuity Configuration Guide (v9.1) — Switcher Options and Configurations • 21
Note: The ME and MultiViewer options use the same hardwareand cannot both be active at the same time. For example, ME1 and MultiViewer 8 use the same hardware and cannot bothbe on at the same time.
Table 13: 4RU Frame Options
DescriptionOption
Adds MultiViewer 1, providing 4MultiViewer heads that can displayup to 32 sources in 41 independentlayouts. All MultiViewer heads sharethe same pool of 32 sources. Thisoption cannot be combined with theACU4-ME6 option.
ACU4-MV1
Adds MultiViewer 1 with the samefeatures as above with the addition of2 floating 3D DVE keys. This optioncannot be combined with theACU4-ME6 option.
ACU4-3DDVE-MV1
Adds MultiViewer 2 with the samefeatures as above. This option cannotbe combined with the ACU4-ME5option.
ACU4-MV2
Adds MultiViewer 2 with the samefeatures as above with the addition of2 floating 3D DVE keys. This optioncannot be combined with theACU4-ME5 option.
ACU4-3DDVE-MV2
Adds MultiViewer 3 with the samefeatures as above. This option cannotbe combined with the ACU4-ME4option.
ACU4-MV3
Adds MultiViewer 3 with the samefeatures as above with the addition of2 floating 3D DVE keys. This optioncannot be combined with theACU4-ME4 option.
ACU4-3DDVE-MV3
Adds MultiViewer 4 with the samefeatures as above. This option cannotbe combined with the ACU4-ME3option.
ACU4-MV4
Adds MultiViewer 4 with the samefeatures as above with the addition of2 floating 3D DVE keys. This optioncannot be combined with theACU4-ME3 option.
ACU4-3DDVE-MV4
Adds MultiViewer 5 with the samefeatures as above. This option cannotbe combined with the ACU4-ME2option.
ACU4-MV5
Adds MultiViewer 6 with the samefeatures as above. This option cannotbe combined with the ACU4-ME1option.
ACU4-MV6
Table 14: 8RU Frame Options
DescriptionOption
Adds MultiViewer 1, providing 4MultiViewer heads that can displayup to 32 sources in 41 independentlayouts. All MultiViewer heads sharethe same pool of 32 sources. Thisoption cannot be combined with theACU8-ME8 option.
ACU8-MV1
Adds MultiViewer 1 with the samefeatures as above with the addition of2 floating 3D DVE keys. This optioncannot be combined with theACU8-ME8 option.
ACU8-3DDVE-MV1
Adds MultiViewer 2 with the samefeatures as above. This option cannotbe combined with the ACU8-ME7option.
ACU8-MV2
Adds MultiViewer 2 with the samefeatures as above with the addition of2 floating 3D DVE keys. This optioncannot be combined with theACU8-ME7 option.
ACU8-3DDVE-MV2
Adds MultiViewer 3 with the samefeatures as above. This option cannotbe combined with the ACU8-ME6option.
ACU8-MV3
Adds MultiViewer 3 with the samefeatures as above with the addition of2 floating 3D DVE keys. This optioncannot be combined with theACU8-ME6 option.
ACU8-3DDVE-MV3
Adds MultiViewer 4 with the samefeatures as above. This option cannotbe combined with the ACU8-ME5option.
ACU8-MV4
Adds MultiViewer 4 with the samefeatures as above with the addition of2 floating 3D DVE keys. This optioncannot be combined with theACU8-ME5 option.
ACU8-3DDVE-MV4
Adds MultiViewer 5 with the samefeatures as above. This option cannotbe combined with the ACU8-ME4option.
ACU8-MV5
Adds MultiViewer 6 with the samefeatures as above. This option cannotbe combined with the ACU8-ME3option.
ACU8-MV6
Adds MultiViewer 7 with the samefeatures as above. This option cannotbe combined with the ACU8-ME2option.
ACU8-MV7
Adds MultiViewer 8 with the samefeatures as above. This option cannotbe combined with the ACU8-ME1option.
ACU8-MV8
22 • Switcher Options and Configurations — Acuity Configuration Guide (v9.1)
3D DVE and 3D DVE WarpThe 3D DVE option allows every type of key to besqueezed or zoomed, cropped, repositioned, and rotatedin 3D space. It can also perform 3D key or backgroundtransitions, or build sequences with complex timelines,keyframe editing, and quick sequence recall. 3D DVEalso comes equipped with a positionable light source,preprocessor effects such as defocus, mosaic,posterization, colorization, strobe, picture frame borders,timeline sequences with holds, and a lot more.Each 3D DVE option provides 2 channels of 3D DVEper ME. Each 3D DVE channel has 2 channel resources,allowing for up to 2 channel resources to be dedicatedto each key. This allows you to fly a key, or combinetwo preset pattern keys in a single keyer for a 2-box.Preset pattern keys only use a single DVE channelresource and all other key types use 2.The built-in warp generator allows for stunningcurvilinear transitions and creative effects. Several 3DDVE Warp effects such as page film, ripple, star, heart,and lens flare are included.
Table 15: 4RU Frame
DescriptionOption
Adds 2 channels of 3D DVE and 1channel of 3D DVE Warp to ME 1.
ACU4-3DDVE-ME1
Adds the same features as above toME 2.
ACU4-3DDVE-ME2
Adds the same features as above toME 3.
ACU4-3DDVE-ME3
Adds the same features as above toME 4.
ACU4-3DDVE-ME4
Adds the same features as above toME 5.
ACU4-3DDVE-ME5
Adds the same features as above toME 6.
ACU4-3DDVE-ME6
Table 16: 8RU Frame
DescriptionOption
Adds 2 channels of 3D DVE and 1channel of 3D DVE Warp to ME 1.
ACU8-3DDVE-ME1
Adds the same features as above toME 2.
ACU8-3DDVE-ME2
Adds the same features as above toME 3.
ACU8-3DDVE-ME3
Adds the same features as above toME 4.
ACU8-3DDVE-ME4
Adds the same features as above toME 5.
ACU8-3DDVE-ME5
Adds the same features as above toME 6.
ACU8-3DDVE-ME6
DescriptionOption
Adds the same features as above toME 7.
ACU8-3DDVE-ME7
Adds the same features as above toME 8.
ACU8-3DDVE-ME8
Port ExpanderThis option adds a Comtrol® DeviceMaster® with four(4) serial ports, effectively increasing the number ofavailable panel remote ports for device control by four(4). The Comtrol® DeviceMaster® connects to theswitcher over a single TCP/IP link and then to eachdevice over a dedicated serial port that can be configuredas either RS-232 or RS-422.
DescriptionOption
Adds a Comtrol® DeviceMaster® tothe 4RU frame.
ACU4-NetExpander
Adds a Comtrol® DeviceMaster® tothe 8RU frame.
ACU8-NetExpander
Device SupportThe Acuity® switcher comes standard with support forcontrolling external VTR (BVW-75), video servers(VDCP, AMP protocols), audio servers, and monitorwalls, as well as devices that support the native RossTalk,serial tally, and Pbus protocols. Support for additionalclasses of devices can be added as required.The functionality that is supported for a particular devicedepends on the protocol that is used to control the deviceand the features that the device has available. Visit theRoss Video rossvideo.com/acuity-device/ for a completelist of supported devices.
Table 17: 4RU Frame
DescriptionOption
Adds support for controlling a routingswitcher to the 4RU frame.
ACU4-ROUTER
Adds support for controlling a roboticcamera system to the 4RU frame.
ACU4-ROBOCAM
Adds support for controlling acharacter generator to the 4RU frame.
ACU4-CGCII
Adds support for controlling a smallaudio mixer (16 and fewer inputs) tothe 4RU frame.
ACU4-AUDMIXSM
Adds support for controlling aYamaha® O1V96 audio mixer to the4RU frame.
ACU4-AUDMIXSMY
Acuity Configuration Guide (v9.1) — Switcher Options and Configurations • 23
DescriptionOption
Adds support for controlling a largeaudio mixer (17 and more inputs) tothe 4RU frame.
ACU4-AUDMIXLG
Adds support for controlling a largeYamaha® audio mixer, except theO1V96, to the 4RU frame.
ACU4-AUDMIXLGY
Table 18: 8RU Frame
DescriptionOption
Adds support for controlling a routingswitcher to the 8RU frame.
ACU8-ROUTER
Adds support for controlling a roboticcamera system to the 8RU frame.
ACU8-ROBOCAM
Adds support for controlling acharacter generator to the 8RU frame.
ACU8-CGCII
Adds support for controlling a smallaudio mixer (16 and fewer inputs) tothe 8RU frame.
ACU8-AUDMIXSM
Adds support for controlling aYamaha® O1V96 audio mixer to the8RU frame.
ACU8-AUDMIXSMY
Adds support for controlling a largeaudio mixer (17 and more inputs) tothe 8RU frame.
ACU8-AUDMIXLG
Adds support for controlling a largeYamaha® audio mixer, except theO1V96, to the 8RU frame.
ACU8-AUDMIXLGY
Spare Parts KitThe spare parts kit contains a number of field replaceableitems that are susceptible to normal wear and tear. Thisincludes replacement button caps, ethernet and powercables, hard drive, and compact flash.
DescriptionOption
Adds the spare parts kit for the 4RUframe.
ACU4-SPAREPARTS
Adds the spare parts kit for the 8RUframe.
ACU8-SPAREPARTS
Adds a spare 4RU Crosspoint and4RU Fan board for the 4RU frame.
ACU4-XPTANDFANKIT
Adds a spare 8RU Crosspoint and8RU Fan board for the 8RU frame.
ACU8-XPTANDFANKIT
Critical Spare Boards KitThe critical spare boards kit includes replacement keysystem boards that are required for your switcher tooperate. This includes the FrameCPU, Crosspoint, FrameFan, and Control Panel CPU boards.
DescriptionOption
Adds the critical spare boards kit forthe 4RU frame.
ACU4-CRITSPAREBOARDS
Adds the critical spare boards kit forthe 8RU frame.
ACU8-CRITSPAREBOARDS
Redundant Power (Frame Only)The redundant power option adds additional powersupplies to the frame. In the event that one power supplyshould fail, or the power to that supply is interrupted, theother power supply carries the load of the frame.The number of power supplies provided for redundancydepends on the size of your frame.
DescriptionOption
Adds redundant power to the 4RUframe.
ACU4-REDPSU
Adds redundant power to the 8RUframe.
ACU8-REDPSU
Additional ManualsThe switcher already comes standard with a set of printedmanuals. An additional set of printed manuals can beordered as a spare, or a new set of printed manuals canbe ordered for the latest software release. An electronicversion of the manuals is always available for downloadfrom the Ross Video website, or from the control panelonce the new software is installed.
Table 19: 4RU Frame Options
DescriptionOption
Adds a printed Setup manual to the4RU frame.
ACU4-MANUALENG
Adds a printed Operation manual tothe 4RU frame.
ACU4-MANUALOPS
Table 20: 8RU Frame Options
DescriptionOption
Adds a printed Setup manual to the8RU frame.
ACU8-MANUALENG
Adds a printed Operation manual tothe 8RU frame.
ACU8-MANUALOPS
Extended Warranty (Frame Only)Extends the standard one-year warranty on your frameby one year. Additional years can be purchased ifrequired.
24 • Switcher Options and Configurations — Acuity Configuration Guide (v9.1)
When adding the extendedwarranty for your frame, quotethe ordering code for the highest number of MEs in yourswitcher.Table 21: 4RU Frame Extended Warranty Options
DescriptionOption
Extends the warranty on the 4RUframe with 1 ME by a year.
ACU4-ROSSCARE-ME1
Extends the warranty on the 4RUframe with 2 MEs by a year.
ACU4-ROSSCARE-ME2
Extends the warranty on the 4RUframe with 3 MEs by a year.
ACU4-ROSSCARE-ME3
Extends the warranty on the 4RUframe with 4 MEs by a year.
ACU4-ROSSCARE-ME4
Extends the warranty on the 4RUframe with 5 MEs by a year.
ACU4-ROSSCARE-ME5
Extends the warranty on the 4RUframe with 6 MEs by a year.
ACU4-ROSSCARE-ME6
Table 22: 8RU Frame Extended Warranty Options
DescriptionOption
Extends the warranty on the 8RUframe with 1 ME by a year.
ACU8-ROSSCARE-ME1
Extends the warranty on the 8RUframe with 2 MEs by a year.
ACU8-ROSSCARE-ME2
Extends the warranty on the 8RUframe with 3 MEs by a year.
ACU8-ROSSCARE-ME3
Extends the warranty on the 8RUframe with 4 MEs by a year.
ACU8-ROSSCARE-ME4
Extends the warranty on the 8RUframe with 5 MEs by a year.
ACU8-ROSSCARE-ME5
Extends the warranty on the 8RUframe with 6 MEs by a year.
ACU8-ROSSCARE-ME6
Extends the warranty on the 8RUframe with 7 MEs by a year.
ACU8-ROSSCARE-ME7
Extends the warranty on the 8RUframe with 8 MEs by a year.
ACU8-ROSSCARE-ME8
Training andCommissioningOptions
Commissioning, 1-Day (ACUITY-COM-1DAY)Once the customer has installed and cabled theequipment, a Ross Commissioning expert will come onsite to get the switcher configured, verify that allperipheral interfaces are operating properly, provide abasic technical orientation, and help you get on the air.Training is provided on the customer's equipment at theirsite. Expenses are extra, and billed at the completion ofthe visit. Ross Video cannot guarantee the availability
of a local Trainer, as such, travel costs to all locationswill be invoiced at cost. Two (2) days, or more, oftraining is recommended for multipleMLE systems. Four(4) weeks advanced scheduling notice is required.Additional days of training can be added if required.Customers cancellation or rescheduling of serviceswithout seven (7) calendar days advanced notice willincur full invoice.
Note: Commissioning does not replace operator or technicaltraining. Contact your Ross Video Sales Representative todiscuss which types of assistance are best suited to your needs.
Online Training, 1-Day (ACUITY-ONL-1DAY)Comprehensive, web-based, online training is availablefrom Ross Video trainers.Two (2) days, or more, of training is recommended formultiple ME systems. Four (4) weeks advancedscheduling notice is required. Additional days of trainingcan be added if required.Customers cancellation or rescheduling of serviceswithout seven (7) calendar days advanced notice willincur full invoice.
Operations Training, 1-Day (ACUITY-OTR-1DAY)Operations training is highly recommended to ensurethat the process of taking your Ross Video switcher toair is a smooth one.Training is provided on the customer's equipment at theirsite. Expenses are extra, and billed at the completion ofthe visit. Ross Video cannot guarantee the availabilityof a local Trainer, as such, travel costs to all locationswill be invoiced at cost. Two (2) days, or more, oftraining is recommended for multipleMLE systems. Four(4) weeks advanced scheduling notice is required.Additional days of training can be added if required.Customers cancellation or rescheduling of serviceswithout seven (7) calendar days advanced notice willincur full invoice.
Technical Training, 1-Day (ACUITY-OTT-1DAY)Onsite technical training introduces the user to some ofthe technical aspects of switcher operation andmaintenance. This includes, but is not limited to; Basicoperation, Switcher installation and configurations,Peripheral interfaces, Video signal flow, System timingrequirements, Circuit block diagrams, Circuit boardoverviews, Jumpers and indicators, Troubleshooting tips,Software upgrading, and Routine maintenance.Training is provided on the customer's equipment at theirsite. Expenses are extra, and billed at the completion ofthe visit. Ross Video cannot guarantee the availability
Acuity Configuration Guide (v9.1) — Switcher Options and Configurations • 25
of a local Trainer, as such, travel costs to all locationswill be invoiced at cost. Two (2) days, or more, oftraining is recommended for multipleMLE systems. Four(4) weeks advanced scheduling notice is required.Additional days of training can be added if required.Customers cancellation or rescheduling of serviceswithout seven (7) calendar days advanced notice willincur full invoice.
26 • Switcher Options and Configurations — Acuity Configuration Guide (v9.1)
SpecificationsThe information is this section is subject to changewithout notice.
Switcher ResourcesThe number of resources specific to your switcherdepends on the options installed.Table 23: Switcher Resources in SD/HD and UHDTV1
Modes
8RUUHDTV1
4RUUHDTV1
8RU HD4RU HDResource
2304 (48 Banks × 48 CCs)CustomControls
64 (8 Banks × 8 Buses)Aux Buses
48Keyers per ME
12Proc Amp/ColorCorrectors perME
11Input ProcAmp/ColorCorrectors perinput
12Output ProcAmp/ColorCorrectors perAux output
2181Input FrameSynchs perinput board
081Input FormatConverters perinput board
12Chroma Keysper ME
8162D DVEChannels perME
11213D DVEChannels perME
013D DVE Warpchannels perME
1,000Maximum DVESequences
01510Max AuxKeys
58 (10fixed + 48configurable)
34 (10fixed + 24configurable)
58 (10fixed + 48configurable)
34 (10fixed + 24configurable)
Maximum GPIInputs orOutputs
8RUUHDTV1
4RUUHDTV1
8RU HD4RU HDResource
72367236MaximumFameTallies
24122412MaximumContactClosures
8Serial RemotePorts (panel)
4SerialPeripheral Ports(frame)
64Ethernet Ports(virtual)
8686MultiViewers
4444Heads perMultiViewer
6363MultiProcessorInputMultiViewers (1per board)
30 (5UHD-2SI
× 6Boards)
15 (5UHD-2SI
× 3Boards)
120 (20BNCs × 6Boards)
60 (20BNCs × 3Boards)
MaximumVideoInputs
15 (5UHD-2SI
× 3Boards)
10 (5UHD-2SI
× 2Boards)
60 (20BNCs × 3Boards)
40 (20BNCs × 2Boards)
MaximumVideoOutputs
4386Max MEs
1,000 (100 Banks × 10 Memories)Memories
04Mix/DSKKeyers
41MultiViewerGrids
50MultiViewerLayouts
32MultiViewerInput Sources
20MultiViewerBoxes
1(vid+alpha)
1(vid+alpha)
44Global-StoreChannels
4 GigabytesGlobal-StoreRAM CACHE(Video)
4 GigabytesGlobal-StoreRAM CACHE(Audio)
2(vid+alpha)
2(vid+alpha)
44ME-StoreChannels
8 Gigabytes per MEME-Store RAMCACHE
Acuity Configuration Guide (v9.1) — Specifications • 27
8RUUHDTV1
4RUUHDTV1
8RU HD4RU HDResource
3,000 frames in SD or 773 frames in 3G or1080i
Media-StoreCapture
31,837 ClipsClip RegisterList (VTR/VideoServer)
Notes:1 Only available on the MultiProcessor Input board.2 Output Proc Amp/Color Correctors are not availableon the Evertz® IP Output board.3 A DVE channel is made up of 2 channel resources(video + alpha). These channel resources can be usedseparately for 2 Preset Pattern (PST PATT) keys perDVE channel.
Rack RequirementsThe ambient temperature inside a rack-mount cabinetmay be greater than the ambient temperature within aroom. To ensure your switcher operates within its themaximum operating temperature range, maintain thefollowing minimum dimensions within the equipmentrack:• 3 inches of clearance on both the right and left-hand
sides of the switcher frame with unrestricted verticalairflow.
• 2RU of space, or the equivalent, for intake air at thebottom of the rack.
• 4RU of space, or the equivalent, for exhaust air at thetop of the rack (open equipment rack top forexample).
Hardware WeightsWeightHardware
59lbs (26.8kg)4RU Frame
92lbs (41.7kg)8RU Frame
48lbs (21.8kg)A1S Panel
57lbs (25.9kg)A2M Panel
62lbs (28.1kg)A2X Panel
75lbs (34.0kg)A3 Panel
74lbs (33.6kg)A3M Panel
103lbs (46.7kg)A4 Panel
Operating TemperatureThe switcher has been qualified at an operationaltemperature range of 0-35°C (32-95°F).
System TimingThe switcher has the following system timingcharacteristics:• All video inputs are zero-time relative to reference
input• Auto timing correct for inputs out of sync by up to ±
¼ line (16us)
LTC Timecode InputValueSpecification
0.5-2.0V (1.0V nominal)Signal Level
600 ohm, soft-selectableTermination
Video Input SpecificationsValueInput Specification
>40m @ 12Gb/sEqualization (using Belden1694A cable)
>50m @ 3Gb/s
>75m @ 1.5Gb/s
>150m @ 270Mb/s (5°-40°C)
75 ohms, terminatingImpedance
SMPTE259M/292M/424M/ST-2082(non-looping)
Video Inputs, SDI
Standard Definition — analogblack
Reference Inputs(non-terminating, looping)
High Definition— tri-level sync
Video Output SpecificationsValueOutput Specification
>4dB 6GHz to 12GHzReturn Loss
>7dB 3GHz to 6GHz
>10dB 1.485GHz to 3GHz
>15dB 5MHz to 1.485GHz
UHD Video Format - <8.0UITiming Jitter
HD Video Format - <1UI
SD Video Format - <0.2UI
28 • Specifications — Acuity Configuration Guide (v9.1)
ValueOutput Specification
UHD Video Format - <0.3UIAlignment Jitter
HD Video Format - <0.2UI
SD Video Format - <0.2UI
UHD Video Format - <10%amplitude
Rise and Fall Time
HD Video Format - <240ps
SD Video Format - 450ps to700ps
800mV ±10%Signal Level
0 VoltsDC Offset
<8%Overshoot
UHD Video Format - SMPTEST 2082-1:2015 (Amendment1:2016)
Video Outputs (SDi)
HD Video Format - 10-bitSMPTE 292M/424M
SD Video Format - 10-bitSMPTE 259M-C
Power RatingTable 24: Input Voltage
Power RatingComponent
90-250V~Panel
47-63Hz
100-120V~Frame
220-240V~
47-63Hz
9A 650W
(Canada 120V~ only)
Table 25: Power Consumption
Power Consumption (FullLoad)
Component
1022W4RU Frame
1412W8RU Frame
159WA1S Panel
247WA2M Panel
289WA2X Panel
340WA3M Panel
379WA3 Panel
526WA4 Panel
Serial PortsThe serial ports on the back of the frame and controlpanel support the RS-232 (TIA/EIA-232) and RS-422(TIA/EIA-422) transmission standards.
123
89
45
67
Figure 6: Serial Port (female)Table 26: Peripheral Port Pinouts
RS-422RS-232Pin
Odd/Even Tx+n/c1
Tx-Rx2
Rx+Tx3
GroundGround4
GroundGround5
Odd/Even Tx-n/c6
Tx+n/c7
Rx-n/c8
5V 1K Pull-upn/c9
Table 27: Remote Port Pinouts
RS-422RS-232Pin
n/cn/c1
Rx-Tx2
Tx+Rx3
GroundGround4
GroundGround5
n/cn/c6
Rx+n/c7
Tx-n/c8
5V 1K Pull-upn/c9
External Link Ports12345678
Figure 7: External Link Port (female)Table 28: External Link Port Pinouts
SignalPin
Rx+1
Rx-2
Acuity Configuration Guide (v9.1) — Specifications • 29
SignalPin
Tx+3
PMC_SDI_Load+4
PMC_SDI_Load-5
Tx-6
PMC_SDI_Latch+7
PMC_SDI_Latch-8
GPI PortsThere are GPI ports located on two types of boards inthe frame. The GPI I/O port is located on the Frame CPUboard in slot A, and the GPIO ports are located on theReference with Tally board in slot G in the 4RU frameand slot L and M in the 8RU fame.
12345678910111213
141516171819202122232425
Figure 8: GPI Port (female)Table 29: GPI I/O Port Pinouts
SignalPin
Ground1
n/c2
n/c3
GPI In 104
GPI In 95
GPI In 86
GPI In 77
GPI In 68
GPI In 59
GPI In 410
GPI In 311
GPI In 212
GPI In 113
n/c14
n/c15
GPI Out 1016
GPI Out 917
GPI Out 818
GPI Out 719
GPI Out 620
GPI Out 521
SignalPin
GPI Out 422
GPI Out 323
GPI Out 224
GPI Out 125
Table 30: GPIO Port Pinouts
SignalPin
Ground1
GPI I/O 12
GPI I/O 23
GPI I/O 34
GPI I/O 45
GPI I/O 56
GPI I/O 67
GPI I/O 78
GPI I/O 89
GPI I/O 910
GPI I/O 1011
GPI I/O 1112
GPI I/O 1213
GPI I/O 1314
GPI I/O 1415
GPI I/O 1516
GPI I/O 1617
GPI I/O 1718
GPI I/O 1819
GPI I/O 1920
GPI I/O 2021
GPI I/O 2122
GPI I/O 2223
GPI I/O 2324
GPI I/O 2425
Tally PortsThere are tally ports on the control panel and the frame.The tally ports 1 and 2 on the control panel and the framehave the same pinouts. On the frame, the tally ports areidentified by the slot and the port number.
30 • Specifications — Acuity Configuration Guide (v9.1)
12345678910111213
141516171819202122232425
Figure 9: Tally Port (female)Table 31: Tally Rating
ValueSpecification
Solid-State Contact ClosureType
100VDCInput Voltage
120mAMaximum Current
Note: Tally ports 3 through 6 on the control panel are used forthe extended tallies option and require the extended tallieshardware to be installed before they can be used.
Table 32: Panel Tally Locations
Port 6Port 5Port 4Port 3Port 2Port 1Pin
917355371911
937557392132
957759412353
977961432574
998163452795
10183654729116
10385674931137
10587695133158
10789715335179
Common10
Common11
Common12
Common13
9274563820214
9476584022415
9678604224616
9880624426817
100826446281018
102846648301219
104866850321420
106887052341621
108907254361822
Common23
Common24
Common25
Contact Closure PortsThe contact closure (CtCl) ports are located at the backof the frame.
12345678910111213
141516171819202122232425
Figure 10: Contact Closure Port (female)Table 33: Contact Closure Rating
ValueSpecification
Solid-State Contact ClosureType
100VDCInput Voltage
120mAMaximum Current
Table 34: Contact Closure Locations
Port 1Pin
CtCl 1 Out1
CtCl 2 Out2
CtCl 3 Out3
CtCl 4 Out4
CtCl 5 Out5
CtCl 6 Out6
CtCl 7 Out7
CtCl 8 Out8
CtCl 9 Out9
CtCl 10 Out10
CtCl 11 Out11
CtCl 12 Out12
n/c13
CtCl 1 Common14
CtCl 2 Common15
CtCl 3 Common16
CtCl 4 Common17
CtCl 5 Common18
CtCl 6 Common19
CtCl 7 Common20
CtCl 8 Common21
CtCl 9 Common22
CtCl 10 Common23
CtCl 11 Common24
CtCl 12 Common25
Acuity Configuration Guide (v9.1) — Specifications • 31
Ordering CodesRefer to the individual sections for more detailed information on each option.
Table 35: Acuity® Control Panel Options
A4A3A3MA2XA2MA1S
A4-PANELA3-PANELA3M-PANELA2X-PANELA2M-PANELA1S-PANELStandard Acuity® Control Panel
A4DD-PANELA3DD-PANELA3MDD-PANELA2XDD-PANELA2MDD-PANELA1SDD-PANELDouble-Down Acuity® ControlPanel
AP-SERVER-PANELAcuity Rack Panel
A4P-ROW-ADDA3P-ROW-ADDA3MP-ROW-ADDA2XP-ROW-ADDA2MP-ROW-ADDPanel Row - Add (StandardPanel)
A2XDDP-ROW-ADDPanel Row - Add (Double-DownPanel)
A4P-ROW-DELA3P-ROW-DELA3MP-ROW-DELA2XP-ROW-DELA2MP-ROW-DELPanel Row - Delete (StandardPanel)
A2XDDP-ROW-DELPanel Row - Delete(Double-Down Panel)
A4P-REDPSUA3P-REDPSUA3MP-REDPSUA2XP-REDPSUA2MP-REDPSUA1SP-REDPSURedundant Power (Panel Only)
AP-AUX2RU24AP-AUX2RU24AP-AUX2RU24Auxiliary Control Panel - 24Buttons with Mnemonics
AP-AUX2RU32AP-AUX2RU32Auxiliary Control Panel - 32Buttons with Mnemonics
AP-AUX2RU40Auxiliary Control Panel - 40Buttons with Mnemonics
PSU-12V4A-2PINAuxiliary Control Panel -Redundant Power
ULTRITOUCH-2Ultritouch Adaptable SystemControl Panel
ULTRITOUCH-PSUltritouch Redundant Power
AP-TALLY-72Extended Panel Tallies, 72 Total
AP-TALLY-108Extended Panel Tallies, 108Total
A4P-ROSSCAREA3P-ROSSCAREA3MP-ROSSCAREA2XP-ROSSCAREA2MP-ROSSCAREA1SP-ROSSCAREExtended Warranty, 1 Year(Standard Panel Only)
A4DDP-ROSSCARE
A3DDP-ROSSCARE
A3MDDP-ROSSCARE
A2XDDP-ROSSCARE
A2MDDP-ROSSCARE
A1SDDP-ROSSCARE
Extended Warranty, 1 Year(Double-Down Panel Only)
AP-AUDIO-UPGPanel Module - Audio Control(Field Upgrade)
AP-AUDIO-SL1AP-AUDIO-SL1AP-AUDIO-SL1AP-AUDIO-SL1Panel Module - Audio Control(Slot 1)
AP-AUDIO-SL2AP-AUDIO-SL2Panel Module - Audio Control(Slot 2)
AP-AUDIO-SL3Panel Module - Audio Control(Slot 3)
AP-KEYER8MODPanel Module Replacement -8-Key Keyer
AP-TRANS8MODPanel Module Replacement -8-Key Transition
32 • Ordering Codes — Acuity Configuration Guide (v9.1)
A4A3A3MA2XA2MA1S
AP-XPTMODPanel Module Replacement -Crosspoint
AP-DD-XPTMODPanel Module Replacement -Double-Down Crosspoint
AP-XPTMODDISPPanel Module Replacement -Crosspoint with Display
AP-DD-XPTMODDISPPanel Module Replacement -Double-Down Crosspoint withDisplay
AP-XPTCCMODPanel Module Replacement -Crosspoint/Custom Control
AP-DD-XPTCCMODPanel Module Replacement -Double-DownCrosspoint/Custom Control
AP-XPTCCMODDISPPanel Module Replacement -Crosspoint/Custom Controlwith Display
AP-DD-XPTCCMODDISPPanel Module Replacement -Double-DownCrosspoint/Custom Controlwith Display
AP-GLBMEMMODPanel Module Replacement -Global Memory
AP-MENUMODPanel Module Replacement -Menu Keypad Module
AP-POSHALFPanel Module Replacement -Positioner
AP-SHOTBOX-UPGPanel Module - Shot Box (FieldUpgrade)
AP-SHOTBOX-SL1
AP-SHOTBOX-SL1
AP-SHOTBOX-SL1
AP-SHOTBOX-SL1
AP-SHOTBOX-SL1
Panel Module - Shot Box (Slot1)
AP-SHOTBOX-SL2
AP-SHOTBOX-SL2
AP-SHOTBOX-SL2
AP-SHOTBOX-SL2
Panel Module - Shot Box (Slot2)
AP-SHOTBOX-SL3
Panel Module - Shot Box (Slot3)
AP-8MNEMONICReplacement Mnemonics
AP-TOUCHSCREEN-AReplacement TouchscreenDisplay
AP-SIDESHOT-EEthernet SideBox Module -SideShotNet
AP-SIDESLIDE-EEthernet SideBox Module -SideSlideNet
Table 36: Carbonite Black Control Panels
CB2CB1
AP-CB2-PANELAP-CB1-PANELCarbonite Black Control Panel
CB2-PANEL-ROSSCARECB1-PANEL-ROSSCAREExtended Warranty
PSU-12V16A-6PINRedundant Power
Acuity Configuration Guide (v9.1) — Ordering Codes • 33
Table 37: Frame Options
8RU4RU
ACU4-FRAME-NOIOAcuity® 4RU Frame (no I/O boards)
ACU8-FRAME-NOIOAcuity® 8RU Frame (no I/O boards)
ACU8-IN20ACU4-IN203G Inputs (20 Additional)
ACU8-MULTIPROC12G-INACU4-MULTIPROC12G-IN12G MultiProcessor Input (20 Additional)
ACU8-12G-OUTACU4-12G-OUT12G Output (20 Additional)
ACU8-EXEIP-INACU4-EXEIP-INEvertz® IP Input
ACU8-EXEIP-OUTACU4-EXEIP-OUTEvertz® IP Output
ACU8-REFGPIOTALLYCCReference with Tally
ACU8-ME1ACU4-ME1ME 1 - Add
ACU8-ME2ACU4-ME2ME 2 - Add
ACU8-ME3ACU4-ME3ME 3 - Add
ACU8-ME4ACU4-ME4ME 4 - Add
ACU8-ME5ACU4-ME5ME 5 - Add
ACU8-ME6ACU4-ME6ME 6 - Add
ACU8-ME7ME 7 - Add
ACU8-ME8ME 8 - Add
ACU8-MV1ACU4-MV1MultiViewer 1 - Add
ACU8-MV2ACU4-MV2MultiViewer 2 - Add
ACU8-MV3ACU4-MV3MultiViewer 3 - Add
ACU8-MV4ACU4-MV4MultiViewer 4 - Add
ACU8-MV5ACU4-MV5MultiViewer 5 - Add
ACU8-MV6ACU4-MV6MultiViewer 6 - Add
ACU8-MV7MultiViewer 7 - Add
ACU8-MV8MultiViewer 8 - Add
ACU8-3DDVE-MV1ACU4-3DDVE-MV1MultiViewer 1 with Floating 3D DVE - Add
ACU8-3DDVE-MV2ACU4-3DDVE-MV2MultiViewer 2 with Floating 3D DVE - Add
ACU8-3DDVE-MV3ACU4-3DDVE-MV3MultiViewer 3 with Floating 3D DVE - Add
ACU8-3DDVE-MV4ACU4-3DDVE-MV4MultiViewer 4 with Floating 3D DVE - Add
ACU8-3DDVE-ME1ACU4-3DDVE-ME13D DVE with 3D DVE Warp for ME 1
ACU8-3DDVE-ME2ACU4-3DDVE-ME23D DVE with 3D DVE Warp for ME 2
ACU8-3DDVE-ME3ACU4-3DDVE-ME33D DVE with 3D DVE Warp for ME 3
ACU8-3DDVE-ME4ACU4-3DDVE-ME43D DVE with 3D DVE Warp for ME 4
ACU8-3DDVE-ME5ACU4-3DDVE-ME53D DVE with 3D DVE Warp for ME 5
ACU8-3DDVE-ME6ACU4-3DDVE-ME63D DVE with 3D DVE Warp for ME 6
ACU8-3DDVE-ME73D DVE with 3D DVE Warp for ME 7
ACU8-3DDVE-ME83D DVE with 3D DVE Warp for ME 8
ACU8-NetExpanderACU4-NetExpanderPort Expander (Ethernet to Serial)
34 • Ordering Codes — Acuity Configuration Guide (v9.1)
8RU4RU
ACU8-ROUTERACU4-ROUTERRouting Switcher Interface
ACU8-AUDMIXSMACU4-AUDMIXSMAudioMixer Interface - Small (16 and fewerinputs)
ACU8-AUDMIXSMYACU4-AUDMIXSMYAudio Mixer Interface - Yamaha 01V96
ACU8-AUDMIXLGACU4-AUDMIXLGAudio Mixer Interface - Large (17 andmoreinputs)
ACU8-AUDMIXLGYACU4-AUDMIXLGYAudio Mixer Interface - Yamaha Mixers(except 01V96)
ACU8-ROBOCAMACU4-ROBOCAMRobotic Camera System Interface
ACU8-CGCIIACU4-CGCIICharacter Generator Interface
ACU8-SPAREPARTSACU4-SPAREPARTSSpare Parts Kit
ACU8-XPTANDFANKITACU4-XPTANDFANKITSpare Crosspoint and Fan board Kit
ACU8-CRITSPAREBOARDSACU4-CRITSPAREBOARDSCritical Spare Boards Kit
ACU8-REDPSUACU4-REDPSURedundant Power (Frame Only)
ACU8-MANUALENGACU4-MANUALENGManual - Engineering
ACU8-MANUALOPSACU4-MANUALOPSManual - Operation
ACU8-ROSSCARE-ME1ACU4-ROSSCARE-ME1Extended Warranty, 1 ME (Adds 1 Year)
ACU8-ROSSCARE-ME2ACU4-ROSSCARE-ME2Extended Warranty, 2 ME (Adds 1 Year)
ACU8-ROSSCARE-ME3ACU4-ROSSCARE-ME3Extended Warranty, 3 ME (Adds 1 Year)
ACU8-ROSSCARE-ME4ACU4-ROSSCARE-ME4Extended Warranty, 4 ME (Adds 1 Year)
ACU8-ROSSCARE-ME5ACU4-ROSSCARE-ME5Extended Warranty, 5 ME (Adds 1 Year)
ACU8-ROSSCARE-ME6ACU4-ROSSCARE-ME6Extended Warranty, 6 ME (Adds 1 Year)
ACU8-ROSSCARE-ME7Extended Warranty, 7 ME (Adds 1 Year)
ACU8-ROSSCARE-ME8Extended Warranty, 8 ME (Adds 1 Year)
Table 38: Vision Upgrade Options
V4V3MV3V2XV2MV2V1MV1
AP-VISION-MENU-UPGAP-VISION-MENU-UPGInternal Menu Module
AP-VISION-MENU-EXT-UPGExternal Menu Module
Table 39: Training and Commissioning
ACUITY-COM-1DAYCommissioning - 1 Day
ACUITY-ONL-1DAYOnline Training - 1 Day
ACUITY-OTR-1DAYOperations Training - 1 Day
ACUITY-OTT-1DAYTechnical Training - 1 Day
Acuity Configuration Guide (v9.1) — Ordering Codes • 35
Panel Dimensions with Slot LocationsThese dimensions are provided as a guide only. Contact Ross Video Technical Support for scale CAD drawings of thecontrol panels and frames. The standard and Double-Down control panels are the same size.Dimensions are in inches with metric dimensions shown in brackets [mm].
A1S/A1SDD
BANK STOP ATTACH
PAUSE RECORD DELETE
RECALL
BANK ENTER
KE YSON LY
EFFDISS
STORE
MERATE
KEYRATE
MEMORY
RECALL STORE
7 8 9
4 5 6
1 2 3
0
EFFRATE
ATTRIB
7 8 9
4 5 6
1 2 3
RUN CC+/- 0 .
BANK CLEAR ENTER
ME2
ALL
ME1
RECALLCLIP/CC
ALL
ME4
ME3
ME1
ME2
ME4
ME3
FADERATE
+4
MERATE
EFFRATE
KEYRATE
UNDO
ATTRIB
KE YSON LY
EFFDISS
GLOBAL MEMORY
RECALL STORE
CUT CUT CUT CUT CUT CUT CUT CUT
MASK
SEL SEL SEL SEL SEL SEL SEL SEL
SELFKEY
AUTOSELECT
CH ROMAKEY
PSTPATT
MATTEFILL
KEYMEM
KEYINV
2DDVE
3DDVE
BORDERCHNLMGMT
SH OWALPHA
KEYPV
KEYERS
1 2 3 4 5 6 7 8
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
HOME
UPONE
HOLD
TOPMENU
MENU KEYPAD
LINK
HOLD
CLEAR
POSITIONER
KEY 5 KEY 6 KEY 7
PGMA
PGMB
PSTBKGD
KEYPRIOR
DISS WIPE DVE SEQ
KEY 8
BKGD KEY 1 KEY 2 KEY 3 KEY 4
TRANSLIMIT
MEDIA
ROLLCLIP
TRANSITION
FRAMESCUT AUTO
TRANS
CUT FADE
FADE TO BLACK
FRAMES USB
HIDEOVLY
MENUME
PGMSRC
MEPV
PGMPV
PREVIEW OVERLAY
41.0 [1041.4]
16.0[406.4]
Slot 1 Slot 2 Slot 3
A2M/A2MDD
BANK STOP ATTACH
PAUSE RECORD DELETE
RECALL
BANK ENTER
KE YSON LY
EFFDISS
STORE
MERATE
KEYRATE
MEMORY
RECALL STORE
7 8 9
4 5 6
1 2 3
0
EFFRATE
ATTRIB
7 8 9
4 5 6
1 2 3
RUN CC+/- 0 .
BANK CLEAR ENTER
ME2
ALL
ME1
RECALLCLIP/CC
ALL
ME4
ME3
ME1
ME2
ME4
ME3
FADERATE
+4
MERATE
EFFRATE
KEYRATE
UNDO
ATTRIB
KE YSON LY
EFFDISS
GLOBAL MEMORY
RECALL STORE
CUT CUT CUT CUT CUT CUT CUT CUT
MASK
SEL SEL SEL SEL SEL SEL SEL SEL
SELFKEY
AUTOSELECT
CH ROMAKEY
PSTPATT
MATTEFILL
KEYMEM
KEYINV
2DDVE
3DDVE
BORDERCHNLMGMT
SH OWALPHA
KEYPV
KEYERS
1 2 3 4 5 6 7 8
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
CUT CUT CUT CUT CUT CUT CUT CUT
MASK
SEL SEL SEL SEL SEL SEL SEL SEL
SELFKEY
AUTOSELECT
CH ROMAKEY
PSTPATT
MATTEFILL
KEYMEM
KEYINV
2DDVE
3DDVE
BORDERCHNLMGMT
SH OWALPHA
KEYPV
KEYERS
1 2 3 4 5 6 7 8
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
HOME
UPONE
HOLD
TOPMENU
MENU KEYPAD
LINK
HOLD
CLEAR
POSITIONER
PGMSRC PVME 4 +4ME 3ME 2ME 1
PREVIEWSAFETEXT
HIDEOVLY
MASKPV
TIMECLOCK
CENTERSAFETITLE
VTRTC
SOU RCEID
MONITORING
CUT FADE
FADE TO BLACK
FRAMES USB
KEY 5 KEY 6 KEY 7
PGMA
PGMB
PSTBKGD
KEYPRIOR
DISS WIPE DVE SEQ
KEY 8
BKGD KEY 1 KEY 2 KEY 3 KEY 4
TRANSLIMIT
MEDIA
ROLLCLIP
TRANSITION
FRAMESCUT AUTO
TRANS
KEY 5 KEY 6 KEY 7
PGMA
PGMB
PSTBKGD
KEYPRIOR
DISS WIPE DVE SEQ
KEY 8
BKGD KEY 1 KEY 2 KEY 3 KEY 4
TRANSLIMIT
MEDIA
ROLLCLIP
TRANSITION
FRAMESCUT AUTO
TRANS
48.0 [1219.2]
16.0[406.4]
A2X/A2XDD
BANK STOP ATTACH
PAUSE RECORD DELETE
RECALL
BANK ENTER
KE YSON LY
EFFDISS
STORE
MERATE
KEYRATE
MEMORY
RECALL STORE
7 8 9
4 5 6
1 2 3
0
EFFRATE
ATTRIB
KEY 5 KEY 6 KEY 7
PGMA
PGMB
PSTBKGD
KEYPRIOR
DISS WIPE DVE SEQ
KEY 8
BKGD KEY 1 KEY 2 KEY 3 KEY 4
TRANSLIMIT
MEDIA
ROLLCLIP
TRANSITION
FRAMESCUT AUTO
TRANS
KEY 5 KEY 6 KEY 7
PGMA
PGMB
PSTBKGD
KEYPRIOR
DISS WIPE DVE SEQ
KEY 8
BKGD KEY 1 KEY 2 KEY 3 KEY 4
TRANSLIMIT
MEDIA
ROLLCLIP
TRANSITION
FRAMESCUT AUTO
TRANS
CUT CUT CUT CUT CUT CUT CUT CUT
MASK
SEL SEL SEL SEL SEL SEL SEL SEL
SELFKEY
AUTOSELECT
CH ROMAKEY
PSTPATT
MATTEFILL
KEYMEM
KEYINV
2DDVE
3DDVE
BORDERCHNLMGMT
SH OWALPHA
KEYPV
KEYERS
1 2 3 4 5 6 7 8
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
CUT CUT CUT CUT CUT CUT CUT CUT
MASK
SEL SEL SEL SEL SEL SEL SEL SEL
SELFKEY
AUTOSELECT
CH ROMAKEY
PSTPATT
MATTEFILL
KEYMEM
KEYINV
2DDVE
3DDVE
BORDERCHNLMGMT
SH OWALPHA
KEYPV
KEYERS
1 2 3 4 5 6 7 8
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
HOME
UPONE
HOLD
TOPMENU
MENU KEYPAD
PGMSRC PVME 4 +4ME 3ME 2ME 1
PREVIEWSAFETEXT
HIDEOVLY
MASKPV
TIMECLOCK
CENTERSAFETITLE
VTRTC
SOU RCEID
MONITORING
CUT FADE
FADE TO BLACK
FRAMES USB
7 8 9
4 5 6
1 2 3
RUN CC+/- 0 .
BANK CLEAR ENTER
ME2
ALL
ME1
RECALLCLIP/CC
ALL
ME4
ME3
ME1
ME2
ME4
ME3
FADERATE
+4
MERATE
EFFRATE
KEYRATE
UNDO
ATTRIB
KE YSON LY
EFFDISS
GLOBAL MEMORY
RECALL STORE
LINK
HOLD
CLEAR
POSITIONER
54.5 [1384.3]
16.0[406.4]
36 • Panel Dimensions with Slot Locations — Acuity Configuration Guide (v9.1)
A3M/A3MDD
BANK STOP ATTACH
PAUSE RECORD DELETE
RECALL
BANK ENTER
KE YSON LY
EFFDISS
STORE
MERATE
KEYRATE
MEMORY
RECALL STORE
7 8 9
4 5 6
1 2 3
0
EFFRATE
ATTRIB
RECALL
BANK ENTER
KE YSON LY
EFFDISS
STORE
MERATE
KEYRATE
MEMORY
RECALL STORE
7 8 9
4 5 6
1 2 3
0
EFFRATE
ATTRIB
KEY 5 KEY 6 KEY 7
PGMA
PGMB
PSTBKGD
KEYPRIOR
DISS WIPE DVE SEQ
KEY 8
BKGD KEY 1 KEY 2 KEY 3 KEY 4
TRANSLIMIT
MEDIA
ROLLCLIP
TRANSITION
FRAMESCUT AUTO
TRANS
KEY 5 KEY 6 KEY 7
PGMA
PGMB
PSTBKGD
KEYPRIOR
DISS WIPE DVE SEQ
KEY 8
BKGD KEY 1 KEY 2 KEY 3 KEY 4
TRANSLIMIT
MEDIA
ROLLCLIP
TRANSITION
FRAMESCUT AUTO
TRANS
KEY 5 KEY 6 KEY 7
PGMA
PGMB
PSTBKGD
KEYPRIOR
DISS WIPE DVE SEQ
KEY 8
BKGD KEY 1 KEY 2 KEY 3 KEY 4
TRANSLIMIT
MEDIA
ROLLCLIP
TRANSITION
FRAMESCUT AUTO
TRANS
CUT CUT CUT CUT CUT CUT CUT CUT
MASK
SEL SEL SEL SEL SEL SEL SEL SEL
SELFKEY
AUTOSELECT
CH ROMAKEY
PSTPATT
MATTEFILL
KEYMEM
KEYINV
2DDVE
3DDVE
BORDERCHNLMGMT
SH OWALPHA
KEYPV
KEYERS
1 2 3 4 5 6 7 8
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
CUT CUT CUT CUT CUT CUT CUT CUT
MASK
SEL SEL SEL SEL SEL SEL SEL SEL
SELFKEY
AUTOSELECT
CH ROMAKEY
PSTPATT
MATTEFILL
KEYMEM
KEYINV
2DDVE
3DDVE
BORDERCHNLMGMT
SH OWALPHA
KEYPV
KEYERS
1 2 3 4 5 6 7 8
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
CUT CUT CUT CUT CUT CUT CUT CUT
MASK
SEL SEL SEL SEL SEL SEL SEL SEL
SELFKEY
AUTOSELECT
CH ROMAKEY
PSTPATT
MATTEFILL
KEYMEM
KEYINV
2DDVE
3DDVE
BORDERCHNLMGMT
SH OWALPHA
KEYPV
KEYERS
1 2 3 4 5 6 7 8
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
HOME
UPONE
HOLD
TOPMENU
MENU KEYPAD
PGMSRC PVME 4 +4ME 3ME 2ME 1
PREVIEWSAFETEXT
HIDEOVLY
MASKPV
TIMECLOCK
CENTERSAFETITLE
VTRTC
SOU RCEID
MONITORING
CUT FADE
FADE TO BLACK
FRAMES USB
7 8 9
4 5 6
1 2 3
RUN CC+/- 0 .
BANK CLEAR ENTER
ME2
ALL
ME1
RECALLCLIP/CC
ALL
ME4
ME3
ME1
ME2
ME4
ME3
FADERATE
+4
MERATE
EFFRATE
KEYRATE
UNDO
ATTRIB
KE YSON LY
EFFDISS
GLOBAL MEMORY
RECALL STORE
LINK
HOLD
CLEAR
POSITIONER
48.0 [1219.2]21.5
[546.1]
Slot 1
A3/A3DD
BANK STOP ATTACH
PAUSE RECORD DELETE
RECALL
BANK ENTER
KE YSON LY
EFFDISS
STORE
MERATE
KEYRATE
MEMORY
RECALL STORE
7 8 9
4 5 6
1 2 3
0
EFFRATE
ATTRIB
RECALL
BANK ENTER
KE YSON LY
EFFDISS
STORE
MERATE
KEYRATE
MEMORY
RECALL STORE
7 8 9
4 5 6
1 2 3
0
EFFRATE
ATTRIB
KEY 5 KEY 6 KEY 7
PGMA
PGMB
PSTBKGD
KEYPRIOR
DISS WIPE DVE SEQ
KEY 8
BKGD KEY 1 KEY 2 KEY 3 KEY 4
TRANSLIMIT
MEDIA
ROLLCLIP
TRANSITION
FRAMESCUT AUTO
TRANS
KEY 5 KEY 6 KEY 7
PGMA
PGMB
PSTBKGD
KEYPRIOR
DISS WIPE DVE SEQ
KEY 8
BKGD KEY 1 KEY 2 KEY 3 KEY 4
TRANSLIMIT
MEDIA
ROLLCLIP
TRANSITION
FRAMESCUT AUTO
TRANS
KEY 5 KEY 6 KEY 7
PGMA
PGMB
PSTBKGD
KEYPRIOR
DISS WIPE DVE SEQ
KEY 8
BKGD KEY 1 KEY 2 KEY 3 KEY 4
TRANSLIMIT
MEDIA
ROLLCLIP
TRANSITION
FRAMESCUT AUTO
TRANS
CUT CUT CUT CUT CUT CUT CUT CUT
MASK
SEL SEL SEL SEL SEL SEL SEL SEL
SELFKEY
AUTOSELECT
CH ROMAKEY
PSTPATT
MATTEFILL
KEYMEM
KEYINV
2DDVE
3DDVE
BORDERCHNLMGMT
SH OWALPHA
KEYPV
KEYERS
1 2 3 4 5 6 7 8
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
CUT CUT CUT CUT CUT CUT CUT CUT
MASK
SEL SEL SEL SEL SEL SEL SEL SEL
SELFKEY
AUTOSELECT
CH ROMAKEY
PSTPATT
MATTEFILL
KEYMEM
KEYINV
2DDVE
3DDVE
BORDERCHNLMGMT
SH OWALPHA
KEYPV
KEYERS
1 2 3 4 5 6 7 8
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
CUT CUT CUT CUT CUT CUT CUT CUT
MASK
SEL SEL SEL SEL SEL SEL SEL SEL
SELFKEY
AUTOSELECT
CH ROMAKEY
PSTPATT
MATTEFILL
KEYMEM
KEYINV
2DDVE
3DDVE
BORDERCHNLMGMT
SH OWALPHA
KEYPV
KEYERS
1 2 3 4 5 6 7 8
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
HOME
UPONE
HOLD
TOPMENU
MENU KEYPAD
PGMSRC PVME 4 +4ME 3ME 2ME 1
PREVIEWSAFETEXT
HIDEOVLY
MASKPV
TIMECLOCK
CENTERSAFETITLE
VTRTC
SOU RCEID
MONITORING
CUT FADE
FADE TO BLACK
FRAMES USB
7 8 9
4 5 6
1 2 3
RUN CC+/- 0 .
BANK CLEAR ENTER
ME2
ALL
ME1
RECALLCLIP/CC
ALL
ME4
ME3
ME1
ME2
ME4
ME3
FADERATE
+4
MERATE
EFFRATE
KEYRATE
UNDO
ATTRIB
KE YSON LY
EFFDISS
GLOBAL MEMORY
RECALL STORE
LINK
HOLD
CLEAR
POSITIONER
54.5 [1384.3]
21.5[546.1]
Slot 1
Acuity Configuration Guide (v9.1) — Panel Dimensions with Slot Locations • 37
A4/A4DD
BANK STOP ATTACH
PAUSE RECORD DELETE
RECALL
BANK ENTER
KE YSON LY
EFFDISS
STORE
MERATE
KEYRATE
MEMORY
RECALL STORE
7 8 9
4 5 6
1 2 3
0
EFFRATE
ATTRIB
RECALL
BANK ENTER
KE YSON LY
EFFDISS
STORE
MERATE
KEYRATE
MEMORY
RECALL STORE
7 8 9
4 5 6
1 2 3
0
EFFRATE
ATTRIB
RECALL
BANK ENTER
KE YSON LY
EFFDISS
STORE
MERATE
KEYRATE
MEMORY
RECALL STORE
7 8 9
4 5 6
1 2 3
0
EFFRATE
ATTRIB
KEY 5 KEY 6 KEY 7
PGMA
PGMB
PSTBKGD
KEYPRIOR
DISS WIPE DVE SEQ
KEY 8
BKGD KEY 1 KEY 2 KEY 3 KEY 4
TRANSLIMIT
MEDIA
ROLLCLIP
TRANSITION
FRAMESCUT AUTO
TRANS
KEY 5 KEY 6 KEY 7
PGMA
PGMB
PSTBKGD
KEYPRIOR
DISS WIPE DVE SEQ
KEY 8
BKGD KEY 1 KEY 2 KEY 3 KEY 4
TRANSLIMIT
MEDIA
ROLLCLIP
TRANSITION
FRAMESCUT AUTO
TRANS
KEY 5 KEY 6 KEY 7
PGMA
PGMB
PSTBKGD
KEYPRIOR
DISS WIPE DVE SEQ
KEY 8
BKGD KEY 1 KEY 2 KEY 3 KEY 4
TRANSLIMIT
MEDIA
ROLLCLIP
TRANSITION
FRAMESCUT AUTO
TRANS
KEY 5 KEY 6 KEY 7
PGMA
PGMB
PSTBKGD
KEYPRIOR
DISS WIPE DVE SEQ
KEY 8
BKGD KEY 1 KEY 2 KEY 3 KEY 4
TRANSLIMIT
MEDIA
ROLLCLIP
TRANSITION
FRAMESCUT AUTO
TRANS
CUT CUT CUT CUT CUT CUT CUT CUT
MASK
SEL SEL SEL SEL SEL SEL SEL SEL
SELFKEY
AUTOSELECT
CH ROMAKEY
PSTPATT
MATTEFILL
KEYMEM
KEYINV
2DDVE
3DDVE
BORDERCHNLMGMT
SH OWALPHA
KEYPV
KEYERS
1 2 3 4 5 6 7 8
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
CUT CUT CUT CUT CUT CUT CUT CUT
MASK
SEL SEL SEL SEL SEL SEL SEL SEL
SELFKEY
AUTOSELECT
CH ROMAKEY
PSTPATT
MATTEFILL
KEYMEM
KEYINV
2DDVE
3DDVE
BORDERCHNLMGMT
SH OWALPHA
KEYPV
KEYERS
1 2 3 4 5 6 7 8
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
CUT CUT CUT CUT CUT CUT CUT CUT
MASK
SEL SEL SEL SEL SEL SEL SEL SEL
SELFKEY
AUTOSELECT
CH ROMAKEY
PSTPATT
MATTEFILL
KEYMEM
KEYINV
2DDVE
3DDVE
BORDERCHNLMGMT
SH OWALPHA
KEYPV
KEYERS
1 2 3 4 5 6 7 8
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
CUT CUT CUT CUT CUT CUT CUT CUT
MASK
SEL SEL SEL SEL SEL SEL SEL SEL
SELFKEY
AUTOSELECT
CH ROMAKEY
PSTPATT
MATTEFILL
KEYMEM
KEYINV
2DDVE
3DDVE
BORDERCHNLMGMT
SH OWALPHA
KEYPV
KEYERS
1 2 3 4 5 6 7 8
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
AUTOTRANS
HOME
UPONE
HOLD
TOPMENU
MENU KEYPAD
PGMSRC PVME 4 +4ME 3ME 2ME 1
PREVIEWSAFETEXT
HIDEOVLY
MASKPV
TIMECLOCK
CENTERSAFETITLE
VTRTC
SOU RCEID
MONITORING
CUT FADE
FADE TO BLACK
FRAMES USB
7 8 9
4 5 6
1 2 3
RUN CC+/- 0 .
BANK CLEAR ENTER
ME2
ALL
ME1
RECALLCLIP/CC
ALL
ME4
ME3
ME1
ME2
ME4
ME3
FADERATE
+4
MERATE
EFFRATE
KEYRATE
UNDO
ATTRIB
KE YSON LY
EFFDISS
GLOBAL MEMORY
RECALL STORE
LINK
HOLD
CLEAR
POSITIONER
61.5 [1562.1]27.5
[698.5]
Slot 1
Slot 2
CB123.42 [594.9]
10.72[272.3]
KEY/AUX/CUSTOM CONTROL
PROGRAM
PRESET
BANK
2
BANK
1
BANK
4
BANK
3
BKGD KEY 1 KEY 2 KEY 3 KEY 4
DISS WIPE DVE MEDIA
TRANSITION
ROLL
CLIP CUTAUTO
TRANSKEY 4CUT
KEY 3CUT
KEY 2CUT
KEY 1CUT
KEY 4AUTO
KEY 3AUTO
KEY 2AUTO
KEY 1AUTO
PUSH PUSH PUSH
LOCK
HOME
CC
UP
MENU
BACK
NEXT
(SHIFT)
SELF
KEY
AUTO
SELECT
CHR
KEY
KEY 1
SELDVE
KEY 2
SEL
KEY 3
SEL
KEY 4
SEL
AUX
1
AUX
2
AUX
3
AUX
4
ME 1
STORE
ME 2
STORE
ME 1
RECALL
ME 2
RECALL
CB223.42 [594.9]
16.24[412.6]
KEY/AUX/CUSTOM CONTROL
PROGRAM
PRESET
SELF
KEY
KEY/AUX/CUSTOM CONTROL
PROGRAM
PRESET
AUX
2
AUX
1
AUX
3
AUX
4
BANK
2
BANK
1
BANK
4
BANK
3
AUX
2
AUX
1
AUX
3
AUX
4
BANK
2
BANK
1
BANK
4
BANK
3
BKGD KEY 1 KEY 2 KEY 3 KEY 4
DISS WIPE DVE MEDIA
TRANSITION 2
ROLL
CLIP CUTAUTO
TRANSKEY 4CUT
KEY 3CUT
KEY 2CUT
KEY 1CUT
KEY 4AUTO
KEY 3AUTO
KEY 2AUTO
KEY 1AUTO
TRANSITION 1
BKGD KEY 1 KEY 2 KEY 3 KEY 4
DISS WIPE DVE MEDIA
KEY 4CUT
KEY 3CUT
KEY 2CUT
KEY 1CUT
KEY 4AUTO
KEY 3AUTO
KEY 2AUTO
KEY 1AUTO
ROLL
CLIP CUTAUTO
TRANS
PUSH PUSH PUSH
LOCK
HOME
CC
UP
MENU
BACK
NEXT
(SHIFT)
SELF
KEY
AUTO
SELECT
AUTO
SELECT
CHR
KEYDVE
DVECHR
KEY
KEY 1
SEL
KEY 1
SEL
KEY 2
SEL
KEY 2
SEL
KEY 3
SEL
KEY 3
SEL
KEY 4
SEL
KEY 4
SEL
ME 1
STORE
ME 2
STORE
ME 1
RECALL
ME 2
RECALL
38 • Panel Dimensions with Slot Locations — Acuity Configuration Guide (v9.1)
Frame DimensionsThese dimensions are provided as a guide only. Contact Ross Video Technical Support for scale CAD drawings of thecontrol panels and frames. The standard and Double-Down control panels are the same size.Dimensions are in inches with metric dimensions shown in brackets [mm].
4RU24.0 [609.6]
18.93 [480.82]
17.59 [446.69]
7.0[177.8]
A
B
C
D
E
F
G
PS
1P
S2
PS
3
LAN1LAN2 GPI I/O
1
2
LTC
CP
U
10/100
10/100
USBPERIPH 4
PERIPH 3
PERIPH 2
PERIPH 1
PANEL
INPUT
12
34
56
78
910
1112
1314
1516
1718
1920
INPUT
12
34
56
78
910
1112
1314
1516
1718
1920
OUTPUT
12
34
56
78
910
1112
1314
1516
1718
1920
OUTPUT
12
34
56
78
910
1112
1314
1516
1718
1920
INPUT
12
34
56
78
910
1112
1314
1516
1718
1920
CONTACT CLOSURES
TALLY
TALLY
GPIO
REF
LOOP LOCK
8RU24.0 [609.6]
18.93 [480.82]
17.63 [447.8]
14.0[355.6]
A
B
C
D
E
F
G
H
I
J
L
M
K
PS 1
PS 2
PS 3
PS 4
LAN1LAN2 GPI I/O
1
2
LTC
CP
U
10/100
10/100
USBPERIPH 4
PERIPH 3
PERIPH 2
PERIPH 1
PANEL
INPUT
12
34
56
78
910
1112
1314
1516
1718
1920
INPUT
12
34
56
78
910
1112
1314
1516
1718
1920
OUTPUT
12
34
56
78
910
1112
1314
1516
1718
1920
OUTPUT
12
34
56
78
910
1112
1314
1516
1718
1920
OUTPUT
12
34
56
78
910
1112
1314
1516
1718
1920
INPUT
12
34
56
78
910
1112
1314
1516
1718
1920
INPUT
12
34
56
78
910
1112
1314
1516
1718
1920
INPUT
12
34
56
78
910
1112
1314
1516
1718
1920
INPUT
12
34
56
78
910
1112
1314
1516
1718
1920
CONTACT CLOSURES
TALLY
TALLY
GPIO
REF
LOOP LOCK
CONTACT CLOSURES
TALLY
TALLY
GPIO
REF
LOOP LOCK
Acuity Configuration Guide (v9.1) — Frame Dimensions • 39