7/30/2019 Activar Radius Server

1/12

7/30/2019 Activar Radius Server

2/12

2

2. Create a user account and password (e.g., vivi in this case) by clicking Local Users andGroups>>Users.)

3. Locate RADIUS Client and right click the mouse button to select New.

7/30/2019 Activar Radius Server

3/12

3

4. Type the related information (for Friendly name, Address (IP or DNS), shared secret and so on)for the client. Keep the value of the shared secret in mind. At last, clickOK to save the settings.

5. Open NPS>>Policy>>Network Policy. Right click the mouse button on the Network Policyto select New.

7/30/2019 Activar Radius Server

4/12

4

6. A pop-up window will appear as follows. Please type the name of the policy (e.g., User-Basedin this case) and clickNext.

7. In the following page, simply clickAdd.

7/30/2019 Activar Radius Server

5/12

5

8. Choose Authentication Type and clickAdd for next step.

9. In the following dialog, check the box ofPAP. Then, clickOK.User Management of Vigor router can only supports PAP authentication. Therefore, configure

the RADIUS server to accept PAP authentication.

7/30/2019 Activar Radius Server

6/12

6

10. In the following dialog, clickNext.

11. Choose Access granted and clickNext.

7/30/2019 Activar Radius Server

7/12

7

12. Check the box ofUnencrypted authentication (PAP, SPAP) and clickNext.

13. When the following dialog appears, simply clickNo.

7/30/2019 Activar Radius Server

8/12

8

14. In the following window, just clickNext.

15. Then, clickNext.

7/30/2019 Activar Radius Server

9/12

9

16. Now, the network policy (named with User-Based) has been created. ClickFinish.

Settings on Vigor3200:

1. Access into the web configurator of Vigor3200.2. Open Application>>RADIUS. Configure RADIUS server IP and Shared Secret. The value for

Shared Secret should be the same as the settings configured in Step 4 described above for

Settings on RADIUS server.

3. ClickOK to save the settings.

7/30/2019 Activar Radius Server

10/12

10

4. Open User Management>>User Profile(Reserved) and click Index #3 to create a user profile.

5. Check the box ofEnable this account and type a user name for such profile. Choose Radius asExternal Server Authentication and clickOK to save the settings.

7/30/2019 Activar Radius Server

11/12

11

6. Open User Management>>General Setup and specify User-Based as the Mode setting. ClickOK.

7. Any user who wants to access into the Internet shall be authenticated by the RADIUSauthentication mechanism. Vigor router will redirect the HTTP connection to the login page as

the picture shown below.

7/30/2019 Activar Radius Server

12/12

12

8. If the access is granted, the following screen will appear.