Upload
rosenberg-advertising
View
217
Download
4
Embed Size (px)
DESCRIPTION
Action Industries West Coast Catalog
Citation preview
WEST COAST PRODUCT CATALOG
p 800.321.1130 • F 480.214.0081 • ACTION-IND.COM
VOLUME 01
WE JUST REDUCED YOUR SHIppING COSTS.
TABLE OF CONTENTS:
OUR LOCATIONS
7815 SOUTH HARDY DRIVE, SUITE 109 • TEMpE, AZ 85284 • ACTION-IND.COM p 800.321.1130 or 480.422.3051 • F 888.329.7880 or 480.214.0081
WE’VE GOT YOU COVERED.
P 800.321.1130 • F 480.214.0081 • action-ind.com • 03
STANDARD SEALS:04 STANDARD ALUMINUM RETAINERS
05 STANDARD BRUSH SEALS
05 STANDARD VINYL SEALS
05 STANDARD RUBBER SEALS
06 STANDARD FLEXIBLE BRUSH SEALS
SLIM-LINE SEALS:07 SLIM-LINE ALUMINUM RETAINERS
07 SLIM-LINE VINYL SEALS
07 SLIM-LINE BRUSH SEALS
LARGE SEALS:08 LARGE ALUMINUM RETAINERS
09 LARGE BRUSH SEALS
09 LARGER RUBBER SEAL
BOTTOM & TOP SEALS:10 ALUMINUM BOTTOM SEAL RETAINERS
10 pLASTIC BOTTOM SEAL RETAINERS
11 SHIp-LAp/TONGUE-AND-GROOVE ADApTERS
11 pLASTIC VINYL BOTTOM SEAL
11 FLEXIBLE TOp SEAL
12 BOTTOM “T” RUBBER SEALS
12 BOTTOM “T” VINYL SEALS
13 ROLLING STEEL DOOR BOTTOM SEAL
13 BOTTOM “T” BULB VINYL SEALS
13 WOOD DOOR BOTTOM NAIL-ON SEALS
JAMB SEALS:14 STANDARD ROLLING STEEL DOOR CLIp-ON GUIDE SEAL
14 FLEXIBLE VINYL REVERSE ANGLE JAMB SEALS
15 FLEXIBLE TpR REVERSE ANGLE JAMB SEALS
15 RIGID VINYL REVERSE ANGLE JAMB SEALS
THRESHOLDS:16 STORM SHIELD® GARAGE DOOR THRESHOLD
17 EXCALIBURTM
MATERIAL HANDLING:18 DOCK LEVELER SEALS
19 WHEEL CHOCKS
19 LAMINATED DOCK BUMpERS
STRIP DOOR:20 RIp-A-STRIp
20 CUSTOM STRIp DOORS
ACCESSORIES:21 LUBRICANT
21 pNEUMATIC SAFETY EDGE
21 COIL CORDS
HARDwARE:22 HINGES
23 ROLLERS
23 SLIDE LOCKS
23 BEARINGS & SHAFT COLLARS
24 DRUMS
24 UNIVERSAL SpRING CONES
25 BOTTOM BRACKETS
25 JAMB BRACKETS
25 SHEAVES & STRApS
26 TERMS & CONDITIONS
TABLE OF CONTENTS:
TABLE OF CONTENTS
04 • action-ind.com • P 800.321.1130 • F 480.214.0081
STANDARD ALUMINUM RETAINERSMade of high-strength aluminum ore and designed to hold any ½” to 3” brush or vinyl seal from our Standard Line. STANDARD LENGTHS: 8’-2”, 9’-2”, 10’-2”, 12’-2”, 14’-2”, 16’-2”, 18’-2”
STANDARD SEALS
PART NUMBER 900-1999’300-899’0-299’ 2000’COLOR
A0083-MI-W Mill $1.26 $1.13 $1.05 $0.93
A0086-MI-W Mill $1.65 $1.51 $1.38 $1.23
A0288-MI-W Mill $0.88 $0.81 $0.73 $0.66
A0282-MI-W Mill $0.86 $0.79 $0.71 $0.64 A0084-MI-W Mill $0.77 $0.71 $0.66 $0.61 A0088-MI-W Mill $0.65 $0.59 $0.55 $0.51 A0082-MI-W Mill $0.65 $0.61 $0.57 $0.53 A0087-MI-W Mill $0.65 $0.59 $0.55 $0.51 A0085-MI-W Mill $0.66 $0.59 $0.55 $0.51
2” OFFSET
3” OFFSET
2” STR
2” 45º
2” OFFSET
1” STR
1” 45º
1” 90º
1” R 45º
A0288A0086A0083
A0088A0084
A0087A0082 A0085
A0282
STA
ND
ARD
SEA
LS
1 7/8”
2 5/16”
1 5/16” 7/8”
1 5/8” 1 1/4”
3 5/16” 2 1/8”
2 15/16”
2”
1 5/8”
1 1/8”
13/16” 1 5/16”
1 1/4”
1 7/8”
11/16”
P 800.321.1130 • F 480.214.0081 • action-ind.com • 05
STANDARD BRUSH SEALSOur Standard Brush Seals are made of versatile and long-lasting filaments that will not hold water or freeze at sub-zero temperatures. Bristles are wrapped around a steel rod to prevent “pull-out.” Standard Brush Seals fit all Standard Aluminum Retainers (see page 4) or Standard Rolling Steel Clip-On Retainers (see page 14).STANDARD LENGTHS: 6’, 7’, 8’, 9’, 10’
PART NUMBER 900-1999’300-899’0-299’2000’
BRISTLE
B0772-00-W 3” $2.44 $2.19 $1.96 $1.75B0771-00-W 2” $2.18 $1.96 $1.76 $1.56B0769-00-W 1 1/2” $1.89 $1.71 $1.54 $1.39B0768-00-W 1” $1.73 $1.56 $1.42 $1.26
2000’
STAN
DA
RD SEA
LS
STANDARD VINYL SEALSThese seals possess excellent memory for shape retention under various conditions at a reasonable cost. Designed to fit in our Standard Aluminum Retainers (see page 4) or Standard Rolling Steel Clip-On Retainers (see page 14). AVAILABLE IN ROLLS OR INSTALLED
PART NUMBER 900-1999’300-899’0-299’ 2000’COLOR
V0021-GR-W Grey $0.37 $0.33 $0.31 $0.29V0023-WH-W White $0.37 $0.33 $0.31 $0.29V0024-BL-W Black $0.37 $0.33 $0.31 $0.29
V0031-GR-W Grey $0.42 $0.39 $0.36 $0.32V0033-WH-W White $0.42 $0.39 $0.36 $0.32V0034-BL-W Black $0.42 $0.39 $0.36 $0.32
V0041-GR-W Grey $0.45 $0.42 $0.40 $0.37V0043-WH-W White $0.45 $0.42 $0.40 $0.37V0044-BL-W Black $0.45 $0.42 $0.40 $0.37
1” (available in 750’ rolls)
1 3/8” (available in 500’ rolls)
2” (available in 400’ rolls)
STANDARD RUBBER SEALSDesigned for applications where extreme temperature changes (-50o – 350oF) may occur. AVAILABLE IN 100’ ROLLS OR INSTALLED
PART NUMBER 900-1999’300-899’0-299’2000’
DESCRIPTION
V0036-00-W 1 3/8” Black $0.65 $0.55 $0.51 $0.45V0056-00-W 2 1/2” Black $0.72 $0.64 $0.58 $0.54
2000’
06 • action-ind.com • P 800.321.1130 • F 480.214.0081
STANDARD FLEXIBLE BRUSH SEALS Like our Standard Brush offering, Action’s Flexible Brush Seals are made of versatile and long-lasting filaments that will not hold water or freeze at sub-zero temperatures. The flexible backing, fused with bristles, fits all of Action’s Standard Aluminum Retainers (see page 4) or Standard Rolling Steel Clip-On Retainers (see page 14).
*Bulk pricing: 10+ reels **200’ per reel
PART NUMBER DESCRIPTION
B0768-PP-W $238.00 $208.00
B0771-PP-W $294.00B0769-PP-W $266.00
B0772-PP-W $330.00$258.00$234.00
$290.00
1” Standard Polypropylene Brush
2” Standard Polypropylene Brush1 1/2” Standard Polypropylene Brush
3” Standard Polypropylene Brush
REEL PRICE *BULK PRICE
DELIVERS FOR LESS. Weighing up to 40% less than metal-channel brushes and bending to fit into smaller spaces, Action’s Flexible Brush saves you significant amounts of money on shipping.
LASTS LONGER. No metal means Action’s Flexible Brush will never rust.
BENDS ANY wAY YOU wANT. Installation is easier than ever, and Action’s Flexible Brush works with any design.
ADAPTS TO FILL YOUR NEEDS. Action’s Flexible Brush not only fits all standard channels; it can also be customized for unique applications.
wON’T PULL OUT. The filaments of Action’s Flexible Brush are actually incorporated into the base, so they’re not going anywhere.
ISN’T OVERLY SENSITIVE. Action’s Flexible Brush construction can withstand a wide range of chemicals.
NEVER GETS DUMPED. Go green with Action’s Flexible Brush. It’s made with non-pVC, 100% recyclable materials.
ALwAYS AVAILABLE. Because Action’s Flexible Brush is so easy and efficient to store, you can make your life easier and save even more on shipping by ordering extra to keep on-hand.
IS JUST LONG ENOUGH. Action’s Flexible Brush is available in extensive lengths. One reel lets you cut as much as you need, reducing pNs/SKUs and eliminating scraps and splices.
STA
ND
ARD
SEA
LS
P 800.321.1130 • F 480.214.0081 • action-ind.com • 07
SLIM-LINE SEALS
SLIM-LINE ALUMINUM RETAINERSSlightly smaller than our Standard Aluminum profiles, Slim-Line is an economical alternative and will accept any Slim-Line brush or vinyl. STANDARD LENGTHS: 8’-2”, 9’-2”, 10’-2”, 12’-2”, 14’-2”, 16’-2”, 18’-2”
PART NUMBER
PART NUMBER
PART NUMBER
300-899’
300-899’
300-899’
0-299’
0-299’
0-299’
DESCRIPTION
DESCRIPTION
BRISTLE
A2088-MI-W 7/8” STR Mill $0.46 $0.43 $0.40 $0.38A2082-MI-W 7/8” 45º Mill $0.46 $0.43 $0.40 $0.38A2830-MI-W 1/2” Mill $0.57 $0.53 $0.48 $0.44
V2021-GR-W 1” Grey $0.32 $0.30 $0.28 $0.25V2023-WH-W 1” White $0.32 $0.30 $0.28 $0.25
B2771-00-W 2” $1.26 $1.14 $1.03 $0.93B2769-00-W 1 1/2” $1.08 $0.99 $0.89 $0.81B2768-00-W 1” $0.95 $0.86 $0.78 $0.71B2767-00-W 3/4” $0.84 $0.77 $0.70 $0.62
SLIM-LINE VINYL SEALSComposed from the purest chemical combination, these seals possess excellent memory for shape retention under various conditions at a reasonable cost. Slim-Line vinyls are designed to fit in our Slim-Line Aluminum Retainers or Slim-Line Clip-On Retainers (see page 14).
SLIM-LINE BRUSH SEALSComparable to our Standard Brush Line, but with a smaller profile. The brush filaments do not hold water and will not freeze at sub-zero temperatures, and make an excellent seal for irregular surfaces. Slim-Line brushes coordinate with any of our Slim-Line Aluminum Retainers or Slim-Line plastic Clip-On Retainers (see page 14).STANDARD LENGTHS: 6’, 7’, 8’, 9’, 10’
900-1999’
900-1999’
900-1999’
2000’
2000’
2000’
SLIM-LIN
E SELAS
08 • action-ind.com • P 800.321.1130 • F 480.214.0081
LARGE SEALS
PART NUMBER 900-1999’300-899’0-299’ 2000’COLOR
A7089-MI-W Mill $2.48 $2.25 $2.03 $1.83
A7092-MI-W Mill $2.48 $2.25 $2.03 $1.83
A7083-MI-W Mill $1.44 $1.31 $1.18 $1.07
A7086-MI-W Mill $1.86 $1.69 $1.53 $1.39
A7082-MI-W Mill $0.90 $0.81 $0.75 $0.67
A7087-MI-W Mill $0.91 $0.82 $0.76 $0.68
A7088-MI-W Mill $0.91 $0.82 $0.76 $0.68
A7388-MI-W Mill $1.75 $1.58 $1.43 $1.27
A7382-MI-W Mill $1.75 $1.58 $1.43 $1.27
5 1/2” STR
5 1/2” 45º
2” OFFSET
3” OFFSET
1” 45º
1” 90º
1” STR
3” STR
3” 45º
LARGE ALUMINUM RETAINERSFor oversized applications such as rolling steel and hangar doors, or for situations where excessive gaps occur. They are designed to accommodate our dense, oversized brush seals or Large Rubber Seal. STANDARD LENGTHS: 8’-2”, 9’-2”, 10’-2”, 12’-2”, 14’-2”, 16’-2”, 18’-2”
A7082A7086A7083
A7092 A7089
A7388A7088 A7382
A7087
LARG
E SE
ALS
5”
5 7/16”
5”
5 1/2”
1 7/8”
2 1/2”
2 7/8”
3 1/2”
1”
1 1/2”
15/16”
1 3/8”
15/16”
1 3/8”
2 5/8”
3 1/8”
2 5/8”
3 1/16”
P 800.321.1130 • F 480.214.0081 • action-ind.com • 09
LARGE BRUSH SEALSOversized polypropylene brushes are designed to fit our Large-Channel Aluminum Retainers and possess the same high-quality properties as our standard brushes. STANDARD LENGTHS: 6’, 7’, 8’, 9’, 10’
LARGE RUBBER SEALEpDM synthetic rubber insert is specially designed for applications where extreme temperatures changes (-50o – 350o F) may occur. Designed to fit any of our Large-Channel Aluminum Retainers.
PART NUMBER 900-1999’300-899’0-299’ 2000’BRISTLE
B3776-00-W 6” $4.82 $4.36 $3.93 $3.49B3775-00-W 5” $4.57 $4.13 $3.72 $3.31B3774-00-W 4” $4.33 $3.89 $3.47 $3.06
PART NUMBER 900-1999’300-899’0-299’2000’
DESCRIPTION
V7066-00-W 3” Black $0.90 $0.84 $0.75 $0.68
2000’
LARG
E SEALS
10 • action-ind.com • P 800.321.1130 • F 480.214.0081
BOTTOM & TOP SEALS
PLASTIC BOTTOM SEAL RETAINERSMade to withstand cracking and hold their shape in temperature extremes. They are designed as economical and versatile retainers that will accept ¼” T-style rubber, vinyl or bulb seals. STANDARD LENGTHS: 8’-2”, 9’-2”, 10’-2”, 16’-2”, 18’-2”
ALUMINUM BOTTOM SEAL RETAINERSDesigned as a longer-lasting, versatile retainer that will accept ¼” T-style rubber, vinyl or bulb seals. STANDARD LENGTHS: 8’-2”, 9’-2”, 10’-2”, 12’-2”, 14’-2”, 16’-2”, 18’-2”
PART NUMBER
PART NUMBER
900-1999’
900-1999’
300-899’
300-899’
0-299’
0-299’
2000’
2000’
DESCRIPTION
SIZE
A1315-00-W 1 3/8” x 1 1/2” L-Shape, Mill $1.50 $1.38 $1.26 $1.14A1700-00-W 1 5/8” Flat, Mill $1.21 $1.10 $0.99 $0.92A2020-01-W 2”x 2” L-Shape, Mill $1.86 $1.70 $1.52 $1.40
P1315-BK-W 1 3/8” X 1 1/2” L-Shape, Black $0.77 $0.69 $0.63 $0.56P2020-BK-W 2” x 2” L-Shape, Black $0.90 $0.81 $0.73 $0.66
BO
TTO
M
& T
OP
SEA
LS
A1700 A1315 A2020
1 5/8”
P1315 P2020
1 3/8”
1 1/2”
2”
2”
1 3/8”
1 1/2”
2”
2”
P 800.321.1130 • F 480.214.0081 • action-ind.com • 11
SHIP-LAP/TONGUE-AND-GROOVE ADAPTERSConvert tongue-and-groove sections to ship-lap and ship-lap sections to tongue-and-groove. Additionally, A2015-02-W serves the dual purpose of being used as either a ship-lap adapter or as a bottom retainer. With each of these innovative accessories, you can make use of the panels available to you.STANDARD LENGTHS: 8’-2”, 10’-2”, 12’-2”, 14’-2”, 16’-2”, 18’-2”
PLASTIC VINYL BOTTOM SEALAll-in-one design is economical and provides easy, one-step field replacement installation with two “contact points.” STANDARD LENGTHS: 8’-2”, 10’-2”, 12’-2”, 14’-2”, 16’-2”, 18’-2”
PART NUMBER
PART NUMBER
900-1999’
900-1999’
300-899’
300-899’
0-299’
0-299’
2000’
2000’
SIZE
COLOR
A2015-01-W 2” x 1 1/2” $1.51 $1.37 $1.24 $1.11A2015-02-W 2” x 1 1/2” $2.11 $1.92 $1.75 $1.58
PL206-BK-W 2” x 7/8” Black $1.37 $1.30 $1.24 $1.18
FLEXIBLE TOP SEALSTANDARD LENGTHS: 100’ ROLLS
PART NUMBER 900-1999’300-899’0-299’COLOR
PL053-BL-W Black $0.42 $0.40 $0.37 $0.35
2000’
A2015-01
1 1/2”
2”
A2015-02
1 1/2”
2”
BO
TTOM
&
TOP SEA
LS