View
223
Download
7
Embed Size (px)
DESCRIPTION
www.action-is.com
Citation preview
ProvidingEngineered Solutions
ContractingServices
www.action-is.com
BROCH
URE
C O R E V A L U E Sleadership
integrity
responsibility
ACTION International Services, an ISO certified company, is a customer oriented company providing engineered solutions in ground water control & specialized equipment rental.
With our technical expertise and a fleet of specialized equipment, we have the ability to provide superior cost effective solutions that meet customers’ budget & timelines.
ACTION has been actively engaged in major projects throughout Middle East region and parts of Europe & Asia for the last 21 years and has an excellent track record for our commitment towards our customers’ projects in industrial, commercial, residential and municipal markets.
ACTION’s Ground Water Control (GWC) division provides a complete dewatering solution for projects of various scopes. We engineer solutions using the latest modeling techniques, while considering the project schedule, health, safety and environment.
Providing Engineered Solutions
01
A Turn-key Contract puts ACTION in charge of the design layout, installation and operation of the dewatering systems which include deepwells and well point systems. We also undertake engineering studies including on-site pump tests and monitoring systems.
Our wide range of high quality pumps allow us to design systems that perform at optimum efficiency providing our customers with a considerable cost advantage. After the installation of the systems, the integrity of the site is continu-ously monitored using piezometers and telemetry devices.
Keeping abreast with the latest technological advances in the field of geo-technical engineering, ACTION has specialized equipment and trained personnel, specific to the type of project we undertake.
ACTION’s Specialized Equipment Rental (SER) division provides equipment for a wide range of industries including Oil & Gas – on/offshore, marine, construction, service utilities industries, manufacturing etc.
leadership
integrity
C O R E V A L U E S
responsibility
C O R E V A L U E S
customer focus
innovation
teamworkpassion
About Us 01
Industries Served 03
Capability Statement 05
Groundwater Control 07
Specialized Equipment Rental 09
Pumps 09
Air Compressors 13
Air Dryers 14
Generators 15
Lighting Towers 16
Accessories 17
Case Studies 19
Key Clients / Projects 25
HSE & Quality 27
Certification 29
Licenses 30
TABLE OF CONTENTS
Providing Engineered Solutions
about us
Specialist technicians can be provided to control the op-erations for the duration of the project.
Our specialized equipment rental services include the following equipment
• Specialized Pumps• Air Compressors / Dryers• Power Generation Systems• Lighting Solutions• Bunded Fuel Tanks• Inside Bundle Cleaner• Outside Bundle Cleaner• Bundle Puller• 3 - Lance TLE• Accessories
customer focus
innovation
teamworkpassion
C O R E V A L U E S
03
Providing Engineered Solutions
ACTION understands the complex demands of the On-shore, Off-shore & Pipeline industry and with a wide range of equipment we will surely match your specific requirements.
• Pipeline flushing• Pipeline drying• Pipeline pressure testing• Oil flushing• Crude oil & diesel pumping• Crude oil storage tank cleaning• Pumping services• Pipes internal de-scaling• UHP weld prepping for NDT &
inspection• Pigging• Chemical injection• Water injection• Water hydraulics
ACTION combines the vast knowledge and product expertise to match the best product and systems to your specific requirements.
Continuous development & investment in our product range ensures that your environmental care responsibilities are met and exceeded.
• High pressure water jet de-scaling & cutting
• Ships waste and bilge handling• Ballasting• Jetty and dock cleaning• Tank vessel cleaning• UHP surface preparation• Low to medium pressure surface
preparation• Hydro abrasive cold cutting and
slurry blasting• Tools & Accessories for Marine Ap-
plications• Under water jetting and cleaning• Ship to Ship transfer
Mining has its own laws and challenges. Huge stretches, immense masses, shim-mering heat by day, icy cold by night. constantly swirling dust, moisture that penetrates everything and extreme tem-peratures, unimaginable tasks: Whoever wants to prove themselves in this situa-tion - whether human or machine - must be strong, hard, tough, and persevering. A challenge that only a few master. We are amongst them. Our Pumps have a long history of proving themselves in mining applications around the globe. Day in and day out, under extreme conditions, in hard continuous operation.
Your benefits:Extensive product rangeLargest Fleet Size: minimal downtimesLow life-cycle costs: effective operation, long TBO intervalsProduct and customer support: everything from one sourceExpert service and support: whenever, wherever
Marine & ShipbuildingOil & Gas - Onshore / Offshore
Mining & Waste WaterMarket
industries served
Providing Engineered Solutions
ACTION provides 365 day/night support for requirements of the Utility, Civil De-fence/ Military sector for both planned and emergency situations. ACTION has the largest pump equipment fleet at its disposal ready to serve the Utility and Civil Defence/ Military industry.
• Emergency flood control• Emergency chemical & hazardous
material wash downs• Air-field runway touchdown area
cleaning• Effluent control• Sewage pipe and storm drain
maintenance• Over pumping• Sewer jetting• Water injection• Sewage over pumping• Storm water control• Dewatering ducts and drainage• Slurry control
ACTION is the market leader in providing solutions for pumping equipment in the modern Manufactur-ing, Refineries and Chemical Industry.
The hire specification of the ACTION portfolio ensures equipment not only meets your requirements but will do so meeting exacting standards in environmental, health and safety and provide market leading economies of use.
• Tank flushing• Pollution control of discharges• Hydro abrasive cold cutting and
slurry blasting• Water hydraulics• Maintenance operations requiring
Ultra High Pressure (UHP)• De-sludging• Tube cleaning• Aerial bundle extractors• Tank to Tank transfer• Air compressors• Generators
ACTION has a proven track record in the construction industry ensuring our customers have the confidence we can perform in both emergency and planned situations. We offer innovative and turnkey solutions for the following applications.
• Dredging• Storm water removal• Drainage & sludge removal• Construction dewatering• Water supply• Pipeline flushing and Hydro-testing• Concrete hydro demolition• Hydro abrasive cold cutting and
slurry blasting• Pumping test & reporting• Ground water modeling• Ground water treatment• Recharge Wells
ConstructionManufacturing/Refineries/Chemical Processing
Civil Defence/Military/Utilities
Before the commencement of the project, a hand over meeting is conducted with all the personnel responsible for the project execution; from the design team through to the project personnel
The meeting handles issues such as:
• Project scope key milestones• System design & installation• System maintenance and troubleshooting• Equipment and manpower scheduling• Project management and reporting system• Coordinating, objectives & critical path• Risk management • Identification of potential project issue & solutions• Health, Safety and Environmental issues
Project Management
We ensure that all the equipment is in optimum condition and provide operational support on a 24 hour basis. Our service and backup team ensures that the operations run smoothly for the duration of the project and the impact on the environment from our activities is kept to mini-mum.
• Optimal oil change intervals allowing cost saving and reduce ecological impact
• High quality motor oil provides thermal stability and minimizes mechanical failure
• Disposal of non-hazardous waste in conjunction with certified organizations
• Tier II, III rated engines prevent over fuelling and resultant smoke
• Enhanced methods for fuel handling reducing eco-logical impact of emissions
• Well maintained equipment resulting in minimal un-planned breakdowns, low repair costs and decreased fuel consumption
• Huge infrastructure to support backup activities
Service and Backup
Providing Engineered Solutions
05
We ensure that all our employees have appropriate technical skills in line with their job requirements. We regularly undertake staff development programmes so that our employees have an up to date understanding of the construction processes, dewatering & equipment handling.
• Operational staff trained on system installation and commissioning, including• Optimization of pump setup• Optimization of engine speed
• Operation at best efficiency point (B.E.P.) • Prevention of over-loading, pump failure & flow and
pressure losses• Prevents increased fuel consumption thereby reduc-
ing Carbon Footprint
Training
To ensure that project requirements for equipment and materials are handled and executed in a timely manner, equipment and material forecasts are updated in real-time based on our customised RM system. The forecast enables ACTION to stay updated in line with the current upcoming project requirements.
ACTION also has an Asset Management System where the information on equipment status is available in real time. A physical equipment tracking system is also in place in our offices, whereby movements and assignments of equipments are monitored.
Fleet Management
Providing Engineered Solutions
capability statement
A Wellpoint system is the oldest practical method of predrainage, and is still one of the most versatile methods, being effective for most types of soil, whether pumping a few gallons per minute (GPM) in fine sandy silts or many thousands of gpm in coarse sands and gravels.
The basic components of a wellpoint system include: a wellpoint pump, header piping, and the wellpoints themselves.
The pump consists of several components that serve three functions: 1) to pump air (create vacuum), 2) to pump wa-ter, and 3) to separate the air from the water. The wellpoint pump is tied into a level header manifold that is conveyed alongside the excavation. The header applies the vacuum to a series of individual wellpoints and conveys the water lifted from the wellpoints to the pump. The wellpoints are, in essence, well-like devices constructed with a screen in-take and usually a filter pack, which draw the water from the ground by the difference in pressure generated at the pump.
WellpointsA deep well is a dewatering device equipped with its own submersible pump. Deep wells can vary from 3 to over 24 in ( 75 to 600mm ) in diameter, and pump from fractions of gallons per minute (GPM) to thousands of gallons per minute. Because they do not act by vacuum methods, deep wells are not limited in effectiveness by depth like wellpoints. They can be installed from 20 ft (6m) deep to hundreds of feet deep.
Deep wells, each with an individual pump, are best suited to homogeneous aquifers that extend well below the bottom of the excavation. In such situations, the wells can be installed to greater depth, the volume pumped by each well is high, and the gradients between wells tend to be flat.
ACTION GWC offers effective and innovative turn-key solutions to groundwater control problems using Deep wells. We offer a comprehensive service from initial design, drilling, supply and installation of pumping equip-ment and operation throughout the project lifecycle.
Deepwells
Providing Engineered Solutions
07
A pumping test consists of pumping groundwater from a well, usually at a constant rate, and measuring water levels in the pumped well and any nearby wells (observation wells) or surface water bodies during and after pumping. The goal of a pumping test, as in any aquifer test, is to estimate hydraulic properties of an aquifer system. It is a practical, reliable method of estimating well performance, well yield, the zone of influence of the well and aquifer characteristics (i.e., the aquifer’s ability to store and transmit water, aquifer extent, presence of boundary conditions and possible hydraulic connection to surface water).
ACTION International services use the latest technologies to give you the best available solution for managing, interpreting and presenting your pumping testing data. A team of highly trained and certified Geologists, Civil Engineers and Hydrologists conducts geologic investigation to obtain reliable information through the different methods e.g., single well test, multi well test, slug test, or large scale pumping test.
Pumping Tests and InstrumentationGround water Models predict the ground and water by numerical simulation. They are useful because the ground flow in the field cannot be observed directly. System per-formance can be validated by transfering field data into single framework to easily identify information’s gaps, and predict the behavior of ground water flow system.
ACTION international has a certified engineering team that can manage all of the civil, geological and hydro geological aspects and works of the future development on site, and to assess ground water systems to examine all the aspects through 2D & 3D conceptual model, and to provide the best possible cost effective and environmen-tal friendly design using state-of-the-art designing and engineering tools and techniques. Action International can provide a multiple output model for different field related to,
Dewatering and underground water control process. Flow and contaminant transport. Water head fluctuation, general hydrogeological
modeling and subsurface water movement.
Ground Water Modeling
Providing Engineered Solutions
groundwater control
•••
Low to High Volume - Low to High Head Pumps
Providing Engineered Solutions
Maximum Head (m) 30 - 190
Maximum Working Pressure (bar (psi)) From 4 - 19 (58 - 275)
Maximum Flow Capacity (lps) 972
Maximum Suction Pressure (bar (psi)) From 2 - 6 (29 - 87)
Maximum Operating Speed (rpm) Upto 2000
Specifications
09
Providing Engineered Solutions
* Zone II (Rig Safe) Certification
specialized equipment rental
High & Ultra High Pressure Pumps *
Inlet Port Size Ranging from 1” - 9”
Discharge Size 1/2” - 9/16” UNF
Maximum Pressure (bar (psi)) From 2100 - 2750 (30460 - 39885)
Maximum Flow Capacity (lpm) 776
Maximum Operating Speed (rpm) 1600 - 2400
Specifications
Providing Engineered Solutions
Submersible Pumps
Maximum Flow (lpm) upto 2375
Maximum Head (m) 90
Maximum Rotation Speed (rpm) 3400 @ 60 Hz, 2800 @ 50 Hz
Maximum Rated Output (kW) 54
Maximum Temp. of pump liquid 104°F/40°C
Specifications
11
Providing Engineered Solutions
Salient Features
1) Compact
2) Easy to transport
3) Specifically developed for use on building sites, pipe trenches and
workshop environments
4) Automatic welding process
5) Stores and protocols welding data pursuant to DVS guidelines and oth-
er national standards
6) Securely join 40 - 630 mm (outer dimensions) pipes and accouterments
Applications
1) Pipe to pipe
2) Pipe to pipe fitting
3) Pipe to T - Piece
4) Pipe to welding neck
HDPE + HDPE Welding Equipment
SIZE RANGE: 90 HDPE Pipe to 630 HDPE Pipe
specialized equipment rental
Air Compressors *
Free Air Delivery AC185 - AC900 (cfm) From 185 upto 900
Cooling Method Oil
Rated Operating Pressure (bar (psi)) From 4.9 - 22.4 (100 - 325)
Maximum Pressure (bar (psi)) Upto 28 (406)
Fuel Consumption @ 2500rpm (litres/hr) From 10 - 65
Outlet Sizes (inches) From 0.5 - 3
Specifications
* Zone II (Rig Safe) Certification
Providing Engineered Solutions
13
Air dryers
Type of Dryer Twin tower desiccant air dryer
Operating Pressure 7 to 22.0 bar G
Inlet Flow Rate 1600 cfm @ 10 bar G or 3000 cfm @ 22 bar G
Chassis Four point crash frame c/w fork lift pockets
Connections 3 Inch ANSI # 150
Dew Point - 60 o C ADP
Extra Benifits Built-in unit heat exchanger
Specifications
Providing Engineered Solutions
specialized equipment rental
Power Generation Systems *
Providing Engineered Solutions
Key FeaturesTransportability
Security and safetyExcellent access for maintenance
Robust / highly corrosion resistant construction
* Ranging From 20 kVA to 1250 kVA
15
Lighting Solutions
Providing Engineered Solutions
SpecificationsMetal Halide Lamp Output (kW) 4 x 1000
Power Requirement Starting (kVA @ V) 20
Mast Height (m) 7 - 9
Lighting Coverage (m2 @ 20 lux) 4500
Input (V @ Hz) 400 @ 50
Maximum Cable Load (kg) 3000
Maximum Wind Stability (km/h) 80
specialized equipment rental
Providing Engineered Solutions
• 50 Micron filter stainless steel screen mesh available on certain models.
• Dividers available on certain models• Valves and Manifold installed as required• Guard primer interior lining• 8 mm plate in the floor, 6 mm on walls and ends• Available in 10 / 20 / 25 ft. sizes
Break TanksBunded Fuel Tanks
ACTION’s Bunded Steel Fuel Tanks are fabricated with 3mm mild steel to a quality standard of ISO 9001:2000. The standard fittings include 3 inch fill port c/w fusi-ble link cap, mechanical percentage contents gauge, pressure vacuum vent, 3/4 inch connection for fill/transfer pumps, 1/2 inch feed and return connection for diesel driven equipments.
17
Providing Engineered Solutions
• Compact or remote transmitter with factory mounted cable
• Flow simulation to ensure correct information chain
• High accuracy down to 0.2 % of rate • Robust construction built to resist environmental
influences• Leakage detection program• Advanced flow statistics• Meter status and alarm handling• Meter and application diagnostic• Calibrated
Incorporating bunded construction as standard, Action Bunded Waste Oil Storage Tanks come complete with large capacity filter bowl, 2” extraction point and overfill warning indicator.
Supplied with integral venting, large capacity integrated tundish and extraction point, removable strainer, EA oil care sticker and lockable lid. Continuous read hydrostatic contents gauge is available as an optional extra.
Bunded Waste Oil Tank MAG 8000 Flow Meter
Capacity (litres) 1453
Weight (kg) 135
Length (mm) 1900
Width (mm) 1250
Height (mm) 1540
Specifications
specialized equipment rental
This project is located in Jeddah, Saudi Arabia. The excavation and pipeline works were carried out by Eastern Trading & Cont. Est. The scope of work included design, supply, installation, commissioning and maintenance of a dewatering operation to enable the client to efficiently and safely excavate for pipeline installation and to keep the excavation dry for construction of manholes and junction boxes. Maximum excavation varied from 5-10m bgl and the width of the excavation was 10m. The total length of excavations was 56km. More than 300 high vol-ume electrical submersible pumps,, more than 60 large capacity (1000 m3/hr) centrifugal pumps and over 90 KM of high pressure discharge lines was needed to pump as much as 1,000,000 m3 a day.
JEDDAH STORMWATER DRAINAGE PROGRAMME BASELINE A, B & C
Providing Engineered Solutions
19
Scope of Works
Comprise of supply, installation and maintenance of Horizontal Deepwells and Wellpoints dewatering system to enable excavation works to be carried out in the dry and safe condition. It is proposed to discharge the groundwater to a stormwater network next to the site excavation.
SOUQ WAQIF PEDESTRIAN TUNNEL DOHA QATAR
Scope of Works
Contractor: Bauer International QatarConsultant: Parson’s Int’l Ltd.Client: Private Engineering Office
Contractor: Eastern Trading & Cont. Est.Consultant: AECOMClient: Jeddah Stormwater Drainage Programme / Aramco
The project is located at Al Ras Al Akhdar area, and project was to build the iconic Presidential Palace. The construction works started in December 2010 and were carried out by joint venture Consolidated Contractors Company CCC and Ghantoot Group.
The scope involves the de-watering of the proposed site to enable construction to be carried out in a dry and in safe conditions utilizing deep well dewatering.
PRESIDENTIAL PALACE - RAS AL AKH-DAR ABU DHABI
Providing Engineered Solutions
case studies
Scope of Works
Contractor: CCEP (Consolidated Cont. Com./Ghantoot Group JV)Consultant: EWAN Gulf House EngineeringClient: Presidential Affairs Department
The scope involves the de-watering of the proposed site to enable construction to be carried out in the dry, in safe conditions utilizing deep well dewatering system.
QATAR METRO RAIL - CONSTRUCTION OF RED LINE SOUTH UNDERGROUND
Scope of Works
Analytical calculation and Computer modeling was conducted to refine the dewatering system design in order to come up with a cost effective solution for each project.
An engineered solution in terms of design, installa-tion, operation and 24 hour maintenance was provided successfully.
Engineered Solution
Contractor: QDVC/GS Engineering/Al Darwish JVConsultant: Jacobs EngineeringClient: Qatar Rail
Providing Engineered Solutions
The project involved feed water to reverse osmosis units, boiler/steam generator units and internal water transfer from lake to lake. As per the client requirements the flow will varies from 400-1000 cu.meter/hr.
ACTION supplied varies to pumps to meet costumer requirement, like HL250, HL8, CD 160, HL225, CD180 etc. An engineered solution in terms of design, installa-tion, operation and 24 hour maintenance was provided successfully.
MUKHAZINA OIL FIELD - OMAN
Scope of Works
Engineered Solution
Contractor: Oxy MukhaiznaConsultant: PDOClient: Oman Petroleum
The scope of this project was to design and built a suitable ground water control system for permanently lower the ground water level in the vicinity of six coaster buildings at Ferrari Experience located at Yas Island, Abu Dhabi. Ground water level should have lowered from 500mm below ground level (BGL) to 2.5m BGL (at least 500mm below lowest cable trench in each building), at six building locations at the YAS Ferrari Experience.
COASTER BUILDINGS AT FERRARI WORLD, YAS ISLAND - ABU DHABI
Scope of Works
Contractor: ACTION Drilling Services & Dewatering LLCConsultant: RambollClient: ALDAR Properties PJSC
21
Action to carry out Sea water pumping works based on the requirement of Marsol International for their 48” subsea pipeline flushing project. Pumping Equipment and HDPE Pipeline to be used to collect water from the sea and discharge to 1 kilometer to the inlet points of 3 subsea pipe lines. We have to operate at a maximum flow rate of 800m3/hr or as required by client in filling 3 lines with correct proportion of chemical dosing. Location was in Fujairah KP0 area and suction point will be from the sea in the open grounds near VHFL and discharge to 1 kilometer away from the sea.
ADCOP 48” SUBSEA PIPE LINE FLUSH-ING - KP0 - FUJAIRAH
Providing Engineered Solutions
Scope of Works
The scope involves the de-watering of the proposed site to enable construction to be carried out in the dry, safe conditions utilizing Deep well dewatering systems as per site requirements.
Area Description:The works for the proposed development involves the excavation as per the following location. Area for Dewatering: 1200m x 30m Approx (total
Quay area) Ground Level: Approximately +4.00m CD Existing Water Table level: Approximately +2.00m CD Max Excavation level: Approximately -2.00m CD
DP WORLD JEBEL ALI T3-Q10 CONTAINER TERMINAL MARINE
Scope of Works
Contractor: TOA CorporationConsultant: Royal HaskoningClient: DP World
Contractor: VAN OORDConsultant: China Petroleum Engi. & Constr. Corporation (CPECC)
Client: International Petroleum Investment Company
•
•••
case studies
The Palm Cove is an inland waterway constructed by Bel-gian Contractor Jan de Nul. The canal extends to a total length of 4.5 km in a horse shoe shape at the foot of the Palm Jebel Ali. ACTION was engaged by Jan de Nul to propose a global pumping solution for the existing Palm Cove. As part of the brief ACTION was informed that the discharge water from the adjacent developments may be pumped into the canal therefore flexibility of the pump-ing solution must be assured.
PALM COVE JEBEL ALI - DUBAI
Among the landmark projects currently under develop-ment in Dubai, none has been more eye-catching and newsworthy than the Palm Islands, widely stated to be the eighth wonder of the world. The Palm Jumeirah is a man-made island about 5 km in diameter covering an area of 600 hectares. The Vehicular Tunnel, a 1.4 km long subsea tunnel that will connecting the spine of the island to the outer crescent, was constructed using the cut-and-cover method. The tunnel comprises three cells with the outer cells carrying three lanes of traffic and two pedestrian walkways in each direction. The central cell is for services and emergency evacuation.
PALM JUMEIRAH VEHICULAR TUNNEL - DUBAI
Providing Engineered Solutions
Contractor: Jan De NulConsultant: Mouchel ArkamanClient: Nakheel
Scope of Works Scope of Works
Contractor: Taisei CorporationConsultant: Parsons InternationalClient: Nakheel
23
Atlantis, The Palm is a destination resort development po-sitioned to serve as the anchor for The Palm, Jumeirah as well as a leading attraction in Dubai. The 1.2 Billion Dollar Hotel and resort was built on a plot of 500,000 m2 on the tip of the Cresent on The Palm Jumeirah.
ACTION international was awarded the Ground Water Control package responsible for the design, installation and operation of all ground water control works required for the duration of the construction works on site. The vast scope of work included the design, engineering and pack-age management of the site-wide dewatering require-ment.
The project is located at Yas Island in Abu Dhabi. The con-struction works were carried out by Taisei Corporation for the Southern Tunnel Project in Yas Island. The scope involved the removal of approximately 1,336,276 m3 of trapped water from the cofferdam in a period of 26 days.
SOUTHERN TUNNEL CROSSINGABU DHABI
ATLANTIS PALM HOTEL & RESORT DUBAI
Providing Engineered Solutions
Scope of Works Scope of Works
Contractor: Kerzner/IstithmarConsultant: Norr Group ConsultantClient: Kerzner/Istithmar
Contractor: Taisei CorporationConsultant: Halcrow International PartnershipClient: Aldar Properties PJSC
case studies
25
Providing Engineered Solutions
Jeddah Stormwater Drainage Programme Baseline A, B & CDewatering
Palm Jumeirah Vehicular Tunnel - DubaiDewatering
Etihad Tower - Abu DhabiDewatering
ADSSC - Abu DhabiSewage Over - Pumping Solution
Nad Al Sheba Race Course - DubaiDewatering
Braka Nuclear Power Plant - Abu DhabiSheet Piling Works
Limitless Downtown - J&P - Deira DubaiOverpumping
Coaster Buildings at Ferrari World, Yas Island, Abu DhabiDewatering
Yas Island Development Project - Abu DhabiSheet Piling
Eastern Mangroves - Abu DhabiDewatering
T3-Q10 Container Terminal (Jebel Ali)Dewatering
Al Bateen Wharf Development - Abu DhabiDewatering
Kingdom Tower - Saudi ArabiaDewatering
Qatar Metro Rail-Constr. of Red Line South UndergroundDewatering
Lourve Museum - Abu DhabiDewatering
Dubai Sewage LineSewage Removal Solution
Jumeirah Beach Residence, District Cooling System - DubaiDewatering
Al Dana Big Dig Tower - Abu DhabiTemporary Sheet Pile Soil Retention Walls
Palm Cove Jebel Ali DubaiDewatering
Mudon, Tatweer - DubaiTemporary Irrigation Pipeline
key clients / projects
Providing Engineered Solutions
Presidential Palace - Ras Al Akhdar - Abu DhabiDewatering
Central Market - Abu DhabiDewatering
The Palm Jumeirah Fairmont Hotels & Residences - DubaiDewatering
Abu-Hamour Surface & Ground Water Drainage Tunnel - QatarDewatering
Al Ras Al Akhdar & Bayoonah St. Improvement Works - Abu DhabiDewatering
Palm Jumeirah Resort Hotel - DubaiDewatering
Southern Tunnel Crossing - Abu DhabiDewatering
Vehicular Tunnel, Spine to Crescent Palm Jumeirah - DubaiDewatering
Atlantis Palm Hotel & Resort - DubaiDewatering
Al Raha Beach - Abu DhabiOver - Pumping Solution
Souq Waqif Pedestrian Tunnel - QatarDewatering
Abu Dhabi AirportDrilling of Investigation Holes
Palm Island, Jumeriah, Shoreline Apartments - DubaiDewatering
Sofitel Hotel The Palm – DubaiDewatering
Al Habtoor Palace Hotel Complex - DubaiDewatering
Vehicular Tunnel - Al Raha to Yas Island - Abu DhabiDewatering
Central Utility Complex - DubaiDewatering
Dubai University Hospital - DubaiDewatering
Tigerwoods, Tatweer - DubaiTemporary Irrigation Pipeline
Khalifa Port Industrial Zone Area A Infrastructure - Abu DhabiDewatering
27
ACTION International is committed to continually improve the quality of our services and simultaneously protecting the
people and the environment. Action is committed to and accountable for QHSE and encourages active participation from all
employees, visitors and contractors.
In order to achieve that Action is committed to:
•EliminatingQHSEnon-conformanceandoccupationalaccidents,injuries,illhealthbyevaluatingandtakingtimelyactionson
Corrective and Preventive actions and adapting an active HAZARD analysis and Risk Assessment system.
•DevelopingandpreparingEmergencyrescueplansforrecoveryfromanykindofcrisis.
•Minimizeourimpactontheenvironmentincludingpollutionthroughrecovery,recyclingandreducingnaturalresource
consumptions.
•Workinginaspiritofconsultationandcooperationwiththeworkers.
•MaintainISO9001:2008,ISO14001:2004&OHSAS18001:2007certifications.
•Settingperformanceobjectives,andcontinuallyimprovingprocesses,servicesandproductquality.
•Providingthenecessaryresources(training,equipment,humanandfinancial).
•Assessingandmanagingrisksforallindividualsonourworklocations
•MeetingandexceedingallapplicablelegalandotherrequirementtowhichActionsubscribes.
•ImplementingQHS&Emanagementsystemswithafocusonidentifyingandassessinghazards,implementingmeasuresto
control the hazards.
•Continuousimprovementbyassessingandassessingandapplyingtheindustry’sbeststandards.
Providing Engineered Solutions
QHSE policy
Managers and Supervisors are accountable for:
•Ensuringthehealthandsafetyofallemployeesundertheirdirection
•Providingallindividualswiththenecessarytraining
•Ensuringequipmentandworkplacesareinsafeandenvironmentallyfriendlycondition
•Assessingandmanagingworkplacehazards
•Implementingandeffectiveemergencypreparednesssystem
Employees and sub-contractors are expected to:
•ImplementthispolicyandcommittoActionQHSEobjectives
•Beaccountablefortheirownsafetyandthesafetyoftheiremployees
•Workinginahealthy,safeandenvironmentallyfriendlymanner
•Keepingtheirworkplacescleanandorderly
•Ensuretheyareinformedof,understandandcomplywithallapplicablelawsandActionpolicies,programsandprocedures.
•Identify,reportandhelpcorrectHealth,SafetyandEnvironmentalissues
•Reportimmediatelyallincidentsandaccidents
•ThisPolicyshallbecontinuallyreviewedtoensureitssuitabilitytothebusinessscope.
This Policy will be reviewed annually
Providing Engineered Solutions
29
certification
Providing Engineered Solutions
licenses
Providing Engineered Solutions
Abu Dhabi, U.A.E. P.O. Box 41123t: +971 (0)2 5540180f: +971 (0)2 5544918
Dubai, U.A.E. P.O. Box 86987t: +971 (0)4 8149300f: +971 (0)4 8854680
Saudi Arabia P.O. Box 5950,Dammam 31432,t: +966 13 8086137f: +966 13 8028025
Qatar P.O. Box 63192,Doha t: +974 44916080f: +974 44916081
Bahrain P.O.Box 60411,Manamat: +973 17422011f: +973 17422044
BROCH
URE
www.action-is.com e: [email protected]
Technical Expertise
+ =
Wide Equipment Range Engineered Green Solutions