Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
ACTA
-REL
IEF-
ORD
ER R
EV03
1120
ACTA-RELIEF ORDER FORM Client Reference: PAGE 1 of 7
*DO NOT SEND PROTECTED HEALTH INFORMATION. IT IS NOT NEEDED TO MAKE THE PRODUCT YOU ARE REQUESTING.*
SIZE SELECTION1
ACTA-RELIEF ORDER FORMHCPCS CODING: E2615POSITIONING BACK, POSTERIOR LATERAL
Shown with Compass® 4 Quick Release 2 Point Hardware. Cover appearance may vary with hardware selection.
This back support is also available through CUSTOM
*Length (L) refers to the actual size dimension of the support from bottom to top edge.
Required
20”
20”
20”
LEN
GTH
*
FRAME WIDTH
16” 18” 20”14”
BASE MSRP
LEN
GTH
*
FRAME WIDTH
14W22L 16W22L 18W22L 20W22L
14W20L 16W20L 18W20L 20W20L
14W18L 16W18L 18W18L 20W18L
14W16L 16W16L 18W16L 20W16L
14W14L 16W14L 18W14L 20W14L
14W12L 16W12L 18W12L 20W12L
14W10L 16W10L 18W10L 20W10L
14W22L 16W22L 18W22L 20W22L
14W20L 16W20L 18W20L 20W20L
14W18L 16W18L 18W18L 20W18L
14W16L 16W16L 18W16L 20W16L
14W14L 16W14L 18W14L 20W14L
14W12L 16W12L 18W12L 20W12L
14W22L 16W22L 18W22L 20W22L
14W20L 16W20L 18W20L 20W20L
14W18L 16W18L 18W18L 20W18L
14W16L 16W16L 18W16L 20W16L
14W14L 16W14L 18W14L 20W14L
14W12L 16W12L 18W12L 20W12L
16”
16”
16”
18”
18”
18”
16”
16”
16”
18”
18”
18”
20”
20”
20”
14”
14”
14”
14”
14”
14”
10”
10”
10”
12”
12”
12”
22”
22”
22”
Sizes available with 2 POINT Mounting Hardware
LEN
GTH
*
FRAME WIDTH
Sizes available with 4 POINT Mounting Hardware
LEN
GTH
*
FRAME WIDTH
Sizes available with POWER Mounting Hardware
Please fill in one of the above with dimensions from the size charts to the right.
Example Part: AR-BS14W16L
Hardware will be selected in Section 2.
Sizes available are subject to hardware being used.
IF DESIRED SIZE IS NOT LISTED, PLEASE CONTACT CUSTOMER SERVICE FOR ASSISTANCE. | 800.736.0925
AR-BS
16”18”20”
14”12”10”
22”
$746.00
14W10L 16W10L 18W10L 20W10L
14W12L 16W12L 18W12L 20W12L
Please note these sizes are not available with lateral trunk supports or a head support.
Please note these sizes are not available with 4 POINT when using lateral trunk
supports.
Company Name/ACCT #:
P.O. Number:
Requested By:
Phone: Fax:
Email:
Ship To:
Client Reference:
For best results, do not fill out in your browser. Interactive form should be completed using Adobe Reader after saving to your local drive. Then email or print and fax to Customer Support at [email protected] or 1.406.522.8563. *DO NOT SEND PROTECTED HEALTH INFORMATION. IT IS NOT NEEDED TO MAKE THE PRODUCT YOU ARE REQUESTING.*
*Since U.S. Medicare coding is subject to change, the provider should always confirm the HCPCS code and coverage criteria as part of the client assessment process.*
ACTA
-REL
IEF-
ORD
ER R
EV03
1120
ACTA-RELIEF ORDER FORM Client Reference: PAGE 2 of 7
*DO NOT SEND PROTECTED HEALTH INFORMATION. IT IS NOT NEEDED TO MAKE THE PRODUCT YOU ARE REQUESTING.*
COVER & HARDWARE SELECTION2 Required
2.1
2.2
COVER SELECTION
HARDWARE STYLE
MSRP $0.00
Price included in back support purchase Price included in back support purchase MSRP add $40.00
Both fabrics are latex-free. Fabric selection is for the support surface only. Other fabrics used in cover construction remain the same.
COMFORT-TEK® Cover(COMFORT-TEK)
STRETCH-AIR® Cover (STRETCH-AIR)
QUICK RELEASE 2 POINT (Q-COMPASS)
FIXED 2 POINT(NQ-COMPASS)
QUANTUM w/ TRU BALANCE 3(PMB-QUANTUM)
QUICK RELEASE 4 POINT(Q-COMPASS4)
FIXED 4 POINT(NQ-COMPASS4)
PERMOBIL w/ CORPUS 3G(PMB-PERMOBIL)
QUICKIE w/ 3.7 POWER(PMB-QUICKIE)
AVID REHAB w/ POWER T & R(PMB-AVID)
ROVI w/ MOTION CONCEPTS*(PMB-ROVI)
COMFORT-TEK® is a smooth, easily cleaned surface. The fluid
protection aids in infection control.
TOP VIEW
STRETCH-AIR® has comfortable stretch, air transmission and heat dissipation. It is not fluid resistant.
FIXED fully adjustable hardware requires tools for back support removal
4 POINT hardware is required on all 24”W back supports using Compass® 4 hardware.
POWER MOUNT hardware has 8” of height adjustment in ½” increments without using tools.
COMPASS® 4 QUICK RELEASE COMPASS® 4 FIXED COMPASS® POWER MOUNT
*Using Power Mount Hardware on ROVI requires mounting to the RECESSED PLANAR INTERFACE PLATE available when ordering the Motion Concepts Seating System. Drilling is required for mounting.
ACTA
-REL
IEF-
ORD
ER R
EV03
1120
ACTA-RELIEF ORDER FORM Client Reference: PAGE 3 of 7
*DO NOT SEND PROTECTED HEALTH INFORMATION. IT IS NOT NEEDED TO MAKE THE PRODUCT YOU ARE REQUESTING.*
BACK SUPPORT ADD-ON SELECTIONS3 Optional
3.1 3.2 3.3COLOR EMBROIDERY PRIVACY FLAPMSRP $26.00 MSRP $26.00 MSRP $37.00
This flap connects with hook & loop attachment between the seat and back for added privacy.
Privacy Flap
Color Location
RED (RED)
PURPLE (PURPLE)
PINK (PINK)
BLUE (BLUE)
GREEN (GREEN)
ORANGE (ORANGE)
REMOVE (REMOVE)
PRIVACY FLAP (PV-FLAP)
A. THREAD COLOR OPTIONS
RED (EMB-RED) BLUE (EMB-BLUE)
PURPLE (EMB-PURPLE) GREEN (EMB-GREEN)
PINK (EMB-PINK) SILVER (EMB-SILVER)
B. FONT OPTIONS
Helvetica (EMB-Helvetica) (EMB-Twilight)
Garamond (EMB-Garamond) (EMB-Script)
C. WORD ONE(Input is case sensitive. Please enter exactly as you want the
words to look. Example: Marcus or marcus or MARCUS)
WORD TWO (optional)(Input is case sensitive. Please enter exactly as you want the
words to look. Example: Marcus or marcus or MARCUS)
*ADDITIONAL LEAD TIMES MAY APPLY
Accent colors are applied via colored piping. Placement of the piping may vary by back support size and mounting hardware. If no colors are selected, our standard silver reflective piping is used at no additional cost.
BODILINK LATERAL TRUNK SUPPORT & HARDWARE4
SLOT MOUNTING MSRP LEFT *EXTRA LEFT RIGHT *EXTRA RIGHTSWING-AWAY HCPCS Code: E1028 $298.00/ea. BL-LTS-GT2SAK-LH BL-LTS-GT2SAK-LH BL-LTS-GT2SAK-RH BL-LTS-GT2SAK-RH
FIXED $178.00/ea. BL-LTS-GT2FXK-LH BL-LTS-GT2FXK-LH BL-LTS-GT2FXK-RH BL-LTS-GT2FXK-RHOR
SWING-AWAY FIXED
Both Fixed and Swing-Away hardware styles are adjustable.
4.1 GT2 MOUNTING HARDWARE
Open Position
Release Button
• You may make one selection per column in section 4.1.• Extra links and long mounting bracket (section 4.8) only for GT2 style
hardware.
ACTA
-REL
IEF-
ORD
ER R
EV03
1120
ACTA-RELIEF ORDER FORM Client Reference: PAGE 4 of 7
*DO NOT SEND PROTECTED HEALTH INFORMATION. IT IS NOT NEEDED TO MAKE THE PRODUCT YOU ARE REQUESTING.*
4.3 PREMIUM PAD COVER
COVER OPTIONS MSRP LEFT *EXTRA LEFT RIGHT *EXTRA RIGHT
NO COVER $0.00/ea. LTS-P2-NO-CV LTS-P2-NO-CV LTS-P2-NO-CV LTS-P2-NO-CV
COMFORT-TEK® $0.00/ea. LTS-P2-COMFORT LTS-P2-COMFORT LTS-P2-COMFORT LTS-P2-COMFORT
STRETCH-AIR® $0.00/ea. LTS-P2-STRETCH LTS-P2-STRETCH LTS-P2-STRETCH LTS-P2-STRETCH
GLIDEWEAR® $13.00/ea. LTS-P2-GLIDE LTS-P2-GLIDE LTS-P2-GLIDE LTS-P2-GLIDE
COMFORT-TEK® with FOAM $13.00/ea. LTS-P2-COMFORT-FM LTS-P2-COMFORT-FM LTS-P2-COMFORT-FM LTS-P2-COMFORT-FM
STRETCH-AIR® with FOAM $13.00/ea. LTS-P2-STRETCH-FM LTS-P2-STRETCH-FM LTS-P2-STRETCH-FM LTS-P2-STRETCH-FM
GLIDEWEAR® with FOAM $26.00/ea. LTS-P2-GLIDE-FM LTS-P2-GLIDE-FM LTS-P2-GLIDE-FM LTS-P2-GLIDE-FM
FOR SKIN PROTECTION & SHEAR REDUCTION. NOT FLUID RESISTANT.
STRETCH-AIR® COVER with FOAMCOMFORT-TEK®
FOR AIR TRANSMISSION & HEAT DISSIPATION.
FOR SOFT FEEL, NON-ZERO CUSHIONING SUPPORT.
FOR FLUID PROTECTION & AN EASILY CLEANED SURFACE.
4.2 PREMIUM PAD STYLEMSRP $0.00/ea.
STYLE OPTIONS LEFT *EXTRA LEFT RIGHT *EXTRA RIGHT
MOLDABLE LTS-P2-MOLD LTS-P2-MOLD LTS-P2-MOLD LTS-P2-MOLD
RIGID LTS-P2-RIGID LTS-P2-RIGID LTS-P2-RIGID LTS-P2-RIGID
OR RIGIDMOLDABLE
• You may make one selection per column in section 4.2.• Follow each column down to sections 4.3 and 4.4 and select a style and cover for each pad
selected in section 4.2 4.2 PREMIUM PAD SIZE & SHAPE
HCPCS Code: E0956 MSRP $88.00/ea.
*Length (L) refers to the dimension of the support from top to bottom edge. Depth (D) refers to the dimension of the support from anterior to posterior edge.
SHAPE SIZE LEFT *EXTRA LEFT RIGHT *EXTRA RIGHT
SUPP
ORT
IVE
3”L x 4”D BL-LTSP2S-3L4D-LH BL-LTSP2S-3L4D-LH BL-LTSP2S-3L4D-RH BL-LTSP2S-3L4D-RH
3”L x 5.5”D BL-LTSP2S-3L5D-LH BL-LTSP2S-3L5D-LH BL-LTSP2S-3L5D-RH BL-LTSP2S-3L5D-RH
4”L x 5”D BL-LTSP2S-4L5D-LH BL-LTSP2S-4L5D-LH BL-LTSP2S-4L5D-RH BL-LTSP2S-4L5D-RH
4”L x 6.5”D BL-LTSP2S-4L6D-LH BL-LTSP2S-4L6D-LH BL-LTSP2S-4L6D-RH BL-LTSP2S-4L6D-RH
5”L x 6.5”D BL-LTSP2S-5L6D-LH BL-LTSP2S-5L6D-LH BL-LTSP2S-5L6D-RH BL-LTSP2S-5L6D-RH
6”L x 6.5”D BL-LTSP2S-6L6D-LH BL-LTSP2S-6L6D-LH BL-LTSP2S-6L6D-RH BL-LTSP2S-6L6D-RH
ACT
IVE
3”L x 4”D BL-LTSP2A-3L4D-LH BL-LTSP2A-3L4D-LH BL-LTSP2A-3L4D-RH BL-LTSP2A-3L4D-RH
3”L x 5.5”D BL-LTSP2A-3L5D-LH BL-LTSP2A-3L5D-LH BL-LTSP2A-3L5D-RH BL-LTSP2A-3L5D-RH
4”L x 5”D BL-LTSP2A-4L5D-LH BL-LTSP2A-4L5D-LH BL-LTSP2A-4L5D-RH BL-LTSP2A-4L5D-RH
4”L x 6.5”D BL-LTSP2A-4L6D-LH BL-LTSP2A-4L6D-LH BL-LTSP2A-4L6D-RH BL-LTSP2A-4L6D-RH
5”L x 6.5”D BL-LTSP2A-5L6D-LH BL-LTSP2A-5L6D-LH BL-LTSP2A-5L6D-RH BL-LTSP2A-5L6D-RH
6”L x 6.5”D BL-LTSP2A-6L6D-LH BL-LTSP2A-6L6D-LH BL-LTSP2A-6L6D-RH BL-LTSP2A-6L6D-RH
OR
L
L
D
D
*”EXTRA” parts may not fit depending on back support, pad, and hardware size and style combinations. Please contact customer support with questions.
ACTA
-REL
IEF-
ORD
ER R
EV03
1120
ACTA-RELIEF ORDER FORM Client Reference: PAGE 5 of 7
*DO NOT SEND PROTECTED HEALTH INFORMATION. IT IS NOT NEEDED TO MAKE THE PRODUCT YOU ARE REQUESTING.*
4.8 GT2 ADDITIONAL OPTIONS
HARDWARE COVER LEFT *EXTRA LEFT RIGHT *EXTRA RIGHT
MSRP $26.00/ea BL-LTS-HCOVER BL-LTS-HCOVER BL-LTS-HCOVER BL-LTS-HCOVER
LONG MOUNTING BRACKET LEFT *EXTRA LEFT RIGHT *EXTRA RIGHT
For Slot Mount MSRP $37.00/ea BL-LTS-GT2LSLOT-LH BL-LTS-GT2LSLOT-LH BL-LTS-GT2LSLOT-RH BL-LTS-GT2LSLOT-RH
EXTRA HARDWARE LINKS LEFT ADD’L LEFT RIGHT ADD’L RIGHT
MSRP $37.00/link BL-LTS-GT2LINK BL-LTS-GT2LINK BL-LTS-GT2LINK BL-LTS-GT2LINK
1¼”
adds 1” of adjustment per bracket
4.6
4.7
BASIC PAD STYLE
BASIC PAD COVER
MSRP $0.00/ea.
MSRP $0.00/ea.
COVER OPTIONS LEFT *EXTRA LEFT RIGHT *EXTRA RIGHT
COMFORT-TEK® LTS-P1-COMFORT LTS-P1-COMFORT LTS-P1-COMFORT LTS-P1-COMFORT
STRETCH-AIR® LTS-P1-STRETCH LTS-P1-STRETCH LTS-P1-STRETCH LTS-P1-STRETCH
STYLE OPTIONS LEFT *EXTRA LEFT RIGHT *EXTRA RIGHT
MOLDABLE LTS-P1-MOLD LTS-P1-MOLD LTS-P1-MOLD LTS-P1-MOLD
RIGID LTS-P1-RIGID LTS-P1-RIGID LTS-P1-RIGID LTS-P1-RIGID
RIGIDMOLDABLE
OR
OR
OR
STRETCH-AIR®
FOR PATIENT COMFORT & HEAT DISSIPATION.
COMFORT-TEK®
FOR FLUID PROTECTION & AN EASILY CLEANED SURFACE.
• You may make one selection per column in section 1.1.• Follow each column down to sections 1.2 and 1.3 and select a style and cover for each pad
selected in section 1.1. Premium pads in section 1.4 on next page.
• You may make one selection per column in section 4.5.• Follow each column down to sections 4.6 and 4.7 and select a style and cover for each pad
selected in section 4.5. 4.5 BASIC PAD SIZE & SHAPE
HCPCS Code: E0956 MSRP $82.00/ea.
Contact Customer Support for custom sizes. 800.736.0925.
*Length (L) refers to the actual size dimension of the support from top to bottom edge. Depth (D) refers to the actual size dimension from anterior to posterior edge.
SHAPE SIZE LEFT *EXTRA LEFT RIGHT *EXTRA RIGHT
SUPP
ORT
IVE
3”L x 4”D BL-LTSP1S-3L4D-LH BL-LTSP1S-3L4D-LH BL-LTSP1S-3L4D-RH BL-LTSP1S-3L4D-RH
3”L x 5”D BL-LTSP1S-3L5D-LH BL-LTSP1S-3L5D-LH BL-LTSP1S-3L5D-RH BL-LTSP1S-3L5D-RH
4”L x 5”D BL-LTSP1S-4L5D-LH BL-LTSP1S-4L5D-LH BL-LTSP1S-4L5D-RH BL-LTSP1S-4L5D-RH
4”L x 6”D BL-LTSP1S-4L6D-LH BL-LTSP1S-4L6D-LH BL-LTSP1S-4L6D-RH BL-LTSP1S-4L6D-RH
5”L x 7”D BL-LTSP1S-5L7D-LH BL-LTSP1S-5L7D-LH BL-LTSP1S-5L7D-RH BL-LTSP1S-5L7D-RH
6”L x 6”D BL-LTSP1S-6L6D-LH BL-LTSP1S-6L6D-LH BL-LTSP1S-6L6D-RH BL-LTSP1S-6L6D-RH
ACT
IVE
3”L x 4”D BL-LTSP1A-3L4D-LH BL-LTSP1A-3L4D-LH BL-LTSP1A-3L4D-RH BL-LTSP1A-3L4D-RH
3”L x 5”D BL-LTSP1A-3L5D-LH BL-LTSP1A-3L5D-LH BL-LTSP1A-3L5D-RH BL-LTSP1A-3L5D-RH
4”L x 5”D BL-LTSP1A-4L5D-LH BL-LTSP1A-4L5D-LH BL-LTSP1A-4L5D-RH BL-LTSP1A-4L5D-RH
4”L x 6”D BL-LTSP1A-4L6D-LH BL-LTSP1A-4L6D-LH BL-LTSP1A-4L6D-RH BL-LTSP1A-4L6D-RH
5”L x 7”D BL-LTSP1A-5L7D-LH BL-LTSP1A-5L7D-LH BL-LTSP1A-5L7D-RH BL-LTSP1A-5L7D-RH
6”L x 6”D BL-LTSP1A-6L6D-LH BL-LTSP1A-6L6D-LH BL-LTSP1A-6L6D-RH BL-LTSP1A-6L6D-RH
L
L
D
D
*”EXTRA” parts may not fit depending on back support, pad, and hardware size and style combinations. Please contact customer support with questions.
OR
ACTA
-REL
IEF-
ORD
ER R
EV03
1120
ACTA-RELIEF ORDER FORM Client Reference: PAGE 6 of 7
*DO NOT SEND PROTECTED HEALTH INFORMATION. IT IS NOT NEEDED TO MAKE THE PRODUCT YOU ARE REQUESTING.*
STEM LENGTH MSRP PART NUMBER
STANDARD 7” STEM $0.00 (HS-STEM-7)
***3” STEM $0.00 (HS-STEM-3)
PT HARDWARE, REMOVABLE, STEM LENGTH OPTION
STAN
DAR
D
PT S
TEM
, 7”
PT S
TEM
, 3”
5.3 PT HARDWARE
HCPCS E1028 PT HARDWARE, REMOVABLE A.
PT H
ARD
WAR
E, M
ID 6
PT H
ARD
WAR
E, L
AT 6
PT H
ARD
WAR
E, M
ID 8
PT H
ARD
WAR
E, L
AT 8
PT H
ARD
WAR
E, M
AX 8
SHAPE MSRP PART NUMBER
MID 6 $223.00 (BL-HS-PT1RMMID6)
LAT 6 $260.00 (BL-HS-PT1RMLAT6)
MID 8* $223.00 (BL-HS-PT1RMMID8)
LAT 8* $260.00 (BL-HS-PT1RMLAT8)
MAX 8** $327.00 (BL-HS-PT1RMMAX8)
*Recommended for Acta-Relief®
back supports. See options for mounting hardware selections.
**Provides the greatest amount of articulation and range of motion.
PT MODEL
TOTAL # OF
LINKS
TOTAL LINK
LENGTH
MAX ANTERIOR
REACH
MAX POSTERIOR
REACH
MAX LATERAL REACH
MID 6 2 6” 5.5” 1” N/A
LAT 6 3 6” 5.5” 1” 6”
MID 8 2 8” 7.5” 1” N/A
LAT 8 3 8” 7.5” 1” 8”
MAX 8 4 8” 7.5” 3” 8”
RANGE OF MOTION
***3” Stem is recommended for use with power mounting where there may be special constraints with power chair functions.
14W x 5L Head Support Pad Pictured
• You may make one selection per column.• Choose PT hardware type in 5.3 A or B.• If choosing A, select a stem size immediately after.
BODILINK HEAD SUPPORT HARDWARE & PADS5 14W x 5L Head Support Pad Pictured
• You may make one selection per column.• Choose pad firmness and size in 5.1.• Choose a cover material in 5.2.
COMFORT-TEK® FOR FLUID PROTECTION & AN EASILY CLEANED
SURFACE.
FOR PATIENT COMFORT. STRETCH-AIR®
FOR SKIN PROTECTION & SHEAR REDUCTION. NOT FLUID RESISTANT.
5.2 PREMIUM PAD COVER MATERIAL
GlideWear® (GLIDEWEAR) (add $26.00)
Comfort-Tek® (COMFORT-TEK)
Stretch-Air® (STRETCH-AIR)
Length (L) refers to the actual size dimension of the support from bottom to top edge.
PREMIUM PAD SIZE HCPCS CODING: E0955 MSRP $237.00
5.1
Premium Head Support Pads angles can be
formed by adjusting the plates in the pad.
6W x 3LSoft BL-HSP1-6W3L
Extra Soft BL-HSP2-6W3L
8W x 4LSoft BL-HSP1-8W4L
Extra Soft BL-HSP2-8W4L
10W x 5Lwith adjustable wings
Soft BL-HSP1-10W5L
Extra Soft BL-HSP2-10W5L
12W x 5Lwith adjustable wings
Soft BL-HSP1-12W5L
Extra Soft BL-HSP2-12W5L
14W x 5Lwith adjustable wings
Soft BL-HSP1-14W5L
Extra Soft BL-HSP2-14W5L
18W x 5Lwith adjustable wings
Soft BL-HSP1-18W5L
Extra Soft BL-HSP2-18W5L
W
W
Pad Firmness
L
L
L
L
L
L
ACTA
-REL
IEF-
ORD
ER R
EV03
1120
ACTA-RELIEF ORDER FORM Client Reference: PAGE 7 of 7
*DO NOT SEND PROTECTED HEALTH INFORMATION. IT IS NOT NEEDED TO MAKE THE PRODUCT YOU ARE REQUESTING.*
SUBMIT BY EMAILThe following are trademarks and registered trademarks of Permobil Seating and Positioning: BodiLink®, Comfort-Tek®, Compass®, and Stretch-Air®.Glidewear® is a registered trademark of Tamarack Habilitation Technologies, Inc.
5.5 EXTRA HARDWARE
LINK LENGTH MSRP EXTRA PART
*EXTRA 2” LINK $57.00 (BL-HS-PT1LINK2)
*EXTRA 3” LINK $57.00 (BL-HS-PT1LINK3)
*EXTRA 4” LINK $57.00 (BL-HS-PT1LINK4)
TOOL-LESS WING LOCK MSRP EXTRA PART EXTRA PART EXTRA PART EXTRA PART
*1 LOCK $21.00/each (BL-HS-52WINGA1) (BL-HS-52WINGA1) (BL-HS-52WINGA1) (BL-HS-52WINGA1)
*FOR PT HARDWARE ONLY
ADDITIONAL MSRP EXTRA PART
1/4” SPACER PLATE $37.00/each (BL-HS-SPCRA)
BRACKET SIZE MSRP PART NUMBER
*ACTA-RELIEF™ 14W BRACKET $152.00 (BL-HS-AR14W)
*ACTA-RELIEF™ 16W BRACKET $152.00 (BL-HS-AR16W)
*ACTA-RELIEF™ 18W BRACKET $152.00 (BL-HS-AR18W)
*ACTA-RELIEF™ 20W BRACKET $152.00 (BL-HS-AR20W)
ADDITIONAL MSRP EXTRA PART
1/4” SPACER PLATE $37.00/each (BL-HS-SPCRA)
BRACKET-ACTA-RELIEF
18W Shown Above
*Bracket only, does not include mounting block.
PT H
ARD
WAR
E, M
ID 6
PT H
ARD
WAR
E, L
AT 6
PT H
ARD
WAR
E, M
ID 8
PT H
ARD
WAR
E, L
AT 8
PT H
ARD
WAR
E, M
AX 8
SHAPE MSRP PART NUMBER
MID 6 $273.00 (BL-HS-PT1FDMID6)
LAT 6 $310.00 (BL-HS-PT1FDLAT6)
MID 8* $273.00 (BL-HS-PT1FDMID8)
LAT 8* $310.00 (BL-HS-PT1FDLAT8)
MAX 8** $357.00 (BL-HS-PT1FDMAX8)
*Recommended for Acta-Relief® back supports. See options for mounting hardware selections.
**Provides the greatest amount of articulation and range of motion.
HCPCS E1028 PT HARDWARE, FLIP-DOWN B.Flip-Down Hardware has 7” Stem
5.4 HEAD SUPPORT MOUNTING OPTION
MOUNTING BLOCK OR BRACKET WITH MOUNTING BLOCK MSRP PART NUMBER
*ACTA-RELIEF™ 14W BRACKET WITH MOUNTING BLOCK $72.00 (HS-MB-AR14W)
*ACTA-RELIEF™ 16W BRACKET WITH MOUNTING BLOCK $72.00 (HS-MB-AR16W)
*ACTA-RELIEF™ 18W BRACKET WITH MOUNTING BLOCK $72.00 (HS-MB-AR18W)
*ACTA-RELIEF™ 20W BRACKET WITH MOUNTING BLOCK $72.00 (HS-MB-AR20W)
POSTERIOR A MOUNTING BLOCK $0.00 (HS-MB-POSTA)
MOUNTING BLOCK-POSTERIOR A
For Acta-Relief with Power Mount Only
BRACKET WITH MOUNTING BLOCK-
ACTA-RELIEF18W Shown Above
For Non-Power Mount Only.
*For Acta Relief™, includes mounting bracket and POSTA block. If you already have an Acta-Relief™ head support bracket, order POSTA Block