1
Information contained in this technical literature is believed to be accurate and is offered in good faith for the benefit of the customer. This company, however, cannot assume any liability or risk involved in the use of its chemical products since the conditions of use are beyond our control. Statements concerning the possible use of our products are not intended as recommendations to use our products in the infringement of any patent. The customer must insure that its uses of our products are noninfringing. We make no warranty of any kind, expressed or implied other than the material conforms to the standard applicable specification. PERSONAL CARE FORMULATION PERSONAL CARE FORMULATION Formulation #013050 INGREDIENT INGREDIENT TECHNOLOGY SHOWCASE TECHNOLOGY SHOWCASE PRODUCT TYPE: Lotion MARKET FOCUS: Women Men FUNCTION: Protect/Prevent Repair SKIN TYPES: All CONTACT US: CONTACT US: Technical Support Mr. Yves Lanctot Vice President, Research & Development [email protected] 450.627.1888 (p) For additional information please visit www.botaneco.ca ACNE TREATMENT ACNE TREATMENT Cold process SNAP SHOT Cold process formula with Oleosomes and a combination of Glycolic acid and Salicylic acid. Oleosomes serve as a natural primary emulsifier clinically proven to be exceptionally mild on the skin and noncomedogenic, which is critical in acne formulations. Oleosomes also help keep the skin, soft through the delivery of emollient oils and vitamin E, to counteract the drying acne ingredients. KEY INGREDIENTS Ingredients Wt% Phase A Glycolic Acid (Glycolic Acid 70%, KIC) 8.00 Sodium Hydroxide Solution qs Phase B Ethyl alcohol 5.00 Salicylic Acid (VWR) 1.00 Phase C Deionized Water qs Phase D Carthamus Tinctorius (Safflower) Oleosomes & Glycerin (Hydresia G2, Botaneco)* 12.50 Tocopherol (Natural Vitamin E, Biochemica) 1.00 Phase E Ammonium Acryloyldimethyltaurate/VP Copolymer (Aristoflex AVC, Clariant) 2.00 Phase F Sodium Hydroxide Solution qs PROCEDURE In Phase A, slowly adjust pH of Glycolic Acid to 4.0 with (25%) Sodium Hydroxide. Record wt % used and deduct from water to be used in Phase C. In Phase B, dissolve salicylic acid in alcohol. Under propeller blade, add Phase A to Phase C and mix at 300 rpm for 5 minutes. Add Phase B into Phase AC and mix for 300 rpm for 5 minutes. Premix Phase D under propeller for 10 minutes at 400 rpm. Under a propeller blade, add Phase D to Phase ABC and mix at 800 rpm for 10 minutes to emulsify. Adjust pH if necessary. Add Phase F and mix at 800 rpm until smooth and uniform (approx. 20 minutes). Adjust pH if necessary. SPECIFICATIONS Viscosity RVTC/2 = 25K cps pH 4.0 4.4 081210.5lf *Interchangeable with Hydresia SF2 or Dulce on an equal actives basis.

Acne Treatment 013 050 (1)

Embed Size (px)

DESCRIPTION

personal care

Citation preview

Page 1: Acne Treatment 013 050 (1)

 

Information  contained  in  this  technical  literature  is  believed  to  be  accurate  and  is  offered  in  good  faith  for  the  benefit  of  the  customer.  This  company,  however,  cannot  assume  any  liability  or  risk  involved  in  the  use  of  its  chemical  products  since  the  conditions  of  use  are  beyond  our  control.  Statements  concerning  the  possible  use  of  our  products  are  not  intended  as  recommendations  to  use  our  products  in  the  infringement  of  any  patent.  The  customer  must  

insure  that  its  uses  of  our  products  are  non-­‐infringing.  We  make  no  warranty  of  any  kind,  expressed  or  implied  other  than  the  material  conforms  to  the  standard  applicable  specification.  

     

PERSONAL  CARE  FORMULATIONPERSONAL  CARE  FORMULATION     Formulation  #013-­‐050    

 

INGREDIENTINGREDIENT    

 

     

TECHNOLOGY  SHOWCASETECHNOLOGY  SHOWCASE      PRODUCT  TYPE:  Lotion    MARKET  FOCUS:  Women   Men    FUNCTION:  Protect/Prevent  Repair    SKIN  TYPES:  All  

 

 CONTACT  US:CONTACT  US:      Technical  Support  Mr.  Yves  Lanctot  Vice  President,  Research  &  Development  [email protected]  450.627.1888  (p)    For  additional  information  please  visit  www.botaneco.ca  

 

ACNE  TREATMENTACNE  TREATMENT    Cold  process    

SNAP  SHOT  Cold  process  formula  with  Oleosomes  and  a  combination  of  Glycolic  acid  and  Salicylic  acid.    Oleosomes  serve  as  a  natural  primary  emulsifier  clinically  proven  to  be  exceptionally  mild  on  the  skin  and  non-­‐comedogenic,  which  is  critical  in  acne  formulations.    Oleosomes  also  help  keep  the  skin,  soft  through  the  delivery  of  emollient  oils  and  vitamin  E,  to  counteract  the  drying  acne  ingredients.    

KEY  INGREDIENTS  Ingredients     Wt%  Phase  A  Glycolic  Acid  (Glycolic  Acid  -­‐70%,  KIC)   8.00  Sodium  Hydroxide  Solution   qs  Phase  B  Ethyl  alcohol   5.00  Salicylic  Acid  (VWR)   1.00  Phase  C  Deionized  Water   qs  Phase  D  Carthamus  Tinctorius  (Safflower)  Oleosomes  &  Glycerin  (Hydresia  G2,  Botaneco)*  

12.50  

Tocopherol  (Natural  Vitamin  E,  Biochemica)   1.00  Phase  E  Ammonium  Acryloyldimethyltaurate/VP  Copolymer  (Aristoflex  AVC,  Clariant)  

2.00  

Phase  F    Sodium  Hydroxide  Solution   qs      

PROCEDURE  In  Phase  A,  slowly  adjust  pH  of  Glycolic  Acid  to  4.0  with  (25%)  Sodium  Hydroxide.  Record  wt  %  used  and  deduct  from  water  to  be  used  in  Phase  C.  In  Phase  B,  dissolve  salicylic  acid  in  alcohol.  Under  propeller  blade,  add  Phase  A  to  Phase  C  and  mix  at  300  rpm  for  5  minutes.  Add  Phase  B  into  Phase  AC  and  mix  for  300  rpm  for  5  minutes.  Premix  Phase  D  under  propeller  for  10  minutes  at  400  rpm.  Under  a  propeller  blade,  add  Phase  D  to  Phase  ABC  and  mix  at  800  rpm  for  10  minutes  to  emulsify.  Adjust  pH  if  necessary.  Add  Phase  F  and  mix  at  800  rpm  until  smooth  and  uniform  (approx.  20  minutes).  Adjust  pH  if  necessary.    

SPECIFICATIONS  Viscosity  RVTC/2  =  25K  cps  pH  4.0  -­‐  4.4  081210.5lf    *Interchangeable  with  Hydresia  SF2  or  Dulce  on  an  equal  actives  basis.