Upload
buinguyet
View
220
Download
1
Embed Size (px)
Citation preview
ACI EDI Marine Cargo/Conveyance Reporting PRD Version 0.5 FINAL DRAFT
ACI EDI MarineCargo/Conveyance Reporting for ANSI Message Standard
FINAL DRAFTVersion 0.5 FINAL DRAFT
Version 0.5 File document.doc5-C Revision Date 2003-11-15 02:22:00 AM
ÓCCRA, 2003 1
ACI EDI Marine Cargo/Conveyance Reporting PRD Version 0.5 FINAL DRAFT
Table of Contents
1.0 PURPOSE............................................................................................................ 4
2.0 INTRODUCTION.............................................................................................. 5
3.0 SCOPE................................................................................................................ 6
4.0 CCRA EDI MARINE SYSTEM OVERVIEW.................................................8
4.1 BACKGROUND................................................................................................... 84.2 OPERATING ENVIRONMENT...............................................................................84.3 EDI COMMUNICATION OPTIONS........................................................................9
5.0 BUSINESS FLOW DIAGRAM.......................................................................10
5.1 IMPORT/IN-TRANSIT/FROB PROCESSING- FIGURE 1........................................105.2 EXPORT PROCESSING- FIGURE 2......................................................................125.3 DESIGN CONSIDERATIONS...............................................................................135.4 PROGRAM MONITORING..................................................................................14
6.0 ACI, EDI SYSTEM FLOW..............................................................................15
6.1 MESSAGE FORMAT.......................................................................................... 156.2 DATA ELEMENT REQUIREMENTS.....................................................................156.3 RECEIVE DATA VIA EDI.................................................................................156.4 PROCESS EDI DATA........................................................................................ 16
7.0 OUTBOUND MESSAGES...............................................................................18
7.1 ACKNOWLEDGEMENT MESSAGES....................................................................187.2 REJECT MESSAGES.......................................................................................... 187.3 DO NOT LOAD, HOLD, DO NOT UNLOAD AND CANCELLATION MESSAGES.....20
8.0 AVAILABILITY OF THE EDI CARGO SYSTEM.......................................24
9.0 RELIABILITY OF THE EDI CARGO SYSTEM..........................................25
9.1 SECURITY........................................................................................................ 259.2 CONFIDENTIALITY...........................................................................................259.3 AUTHORIZATION.............................................................................................259.4 AUTHENTICATION............................................................................................ 259.5 INCOMPLETE, INACCURATE OR CORRUPTED DOCUMENTS...............................25
10.0 PROBLEM REPORTING & RESOLUTION................................................26
10.1 BACK-UP-PROVISIONS....................................................................................2610.2 CONTINGENCY PLAN IN THE EVENT OF SYSTEM FAILURE..............................26
11.0 THE APPLICATION & TESTING PROCESS..............................................27
11.1 ARE YOU READY FOR EDI?...........................................................................27
ÓCCRA, 2003 2
ACI EDI Marine Cargo/Conveyance Reporting PRD Version 0.5 FINAL DRAFT
11.2 THE FORMAL APPLICATION PROCESS..............................................................2711.3 THE MEMORANDUM OF UNDERSTANDING......................................................2711.4 THE CLIENT REPRESENTATIVE.........................................................................27
12.0 CARRIER AND FREIGHT FORWARDER ACCEPTANCE TESTING... .29
12.1 REQUIREMENT................................................................................................. 29
APPENDIX A – GLOSSARY OF TERMS.................................................................31
APPENDIX B – CLIENT APPLICATION & MEMORANDUM OF UNDERSTANDING..................................................................................................... 37
APPENDIX C – ANSI MAPS & IMPORTANT INFORMATION...........................41
A6A MARINE CARGO MAP FOR IMPORT, INTRANSIT AND FROB..............46
A6A MARINE SUPPLEMENTARY CARGO MAP FOR IMPORT, INTRANSIT AND FROB................................................................................................................... 79
A6A MARINE EMPTY CARGO MAP FOR IMPORT AND FROB.....................103
A6A MARINE EXPORT CARGO MAP..................................................................127
A6 CONVEYANCE MARINE VESSEL MAP.........................................................154
APPENDIX D – DATA ELEMENT DEFINITIONS................................................179
APPENDIX E – CODE TABLES..............................................................................199
APPENDIX F – ANSI RESPONSE MAPS & EXTERNAL ERROR CODES.......201
APPENDIX g – ADDITIONAL INFORMATION...................................................241
Table of FiguresFigure 1: Import/In-transit/FROB Business Flow...........................................................10Figure 2: Export Business Flow.....................................................................................12
ÓCCRA, 2003 3
ACI EDI Marine Cargo/Conveyance Reporting PRD Version 0.5 FINAL DRAFT
1.0 PURPOSE
This document was designed to provide participants of the Advance Commercial Information (ACI), Electronic Data Interchange (EDI) Cargo and Conveyance Reporting process technical user information on how to use this new reporting process. It is mandatory reading material to provide information relevant to reporting marine cargo and conveyances via EDI. The main purpose of this document is to assist participants with their internal implementation.
This participants’ requirements document (PRD) encompasses information relevant to ACI EDI Marine Cargo and Conveyance Reporting. The two ACI EDI message maps – cargo and conveyance – are in ANSI standards. A separate PRD is available for messages in EDIFACT standard.
We recommend that participants review all narrative sections of this document in conjunction with the message maps as some operational rules impact system programming.
Any queries or documentation requests should be directed to:
Electronic Commerce UnitCustoms BranchCanada Customs and Revenue Agency191 Laurier Avenue West, 15th FloorSir Richard Scott BuildingOttawa, Ontario K1A 0L5Phone: 1-888-957-7224
ÓCCRA, 2003 4
ACI EDI Marine Cargo/Conveyance Reporting PRD Version 0.5 FINAL DRAFT
2.0 INTRODUCTION
The Customs Action Plan announced Customs’ strategy to establish two commercial processing streams to proactively deal with the increases in volume of commercial goods. The Customs Self Assessment (CSA) stream was developed to expedite the processing of low-risk goods based on pre-verification, pre-approval and post-audit. The Advance Commercial Information (ACI) project was established to deal with unknown and higher risk goods by providing the CCRA with electronic cargo and conveyance data within advance timeframes to be processed by an automated risk assessment tool.
Mandatory EDI Cargo and Conveyance Reporting will be implemented in phases by mode, beginning with the marine mode in April 2004.
The CCRA has modified existing ANSI 311 CUSCAR message maps and developed new EDIFACT CUSCAR message maps. The EDIFACT maps have been developed using a single message structure to allow reporting of cargo and conveyance data by different modes of transportation. This multi-modal message structure was developed as part of the G7 Initiative to Harmonize and Simplify Customs Procedures.
ÓCCRA, 2003 5
ACI EDI Marine Cargo/Conveyance Reporting PRD Version 0.5 FINAL DRAFT
3.0 SCOPE
This document addresses the mandatory transmission and receipt of electronic conveyance, cargo, supplementary cargo, and empty container in international shuttle service data, in the marine mode, from carriers and freight forwarders.
EDI Marine Cargo and Conveyance Reporting will:
obtain additional, pre-arrival electronic data for commercial marine goods to allow for more effective risk assessment by providing crucial information such as ultimate consignee, clear and accurate cargo descriptions, and the identification of hazardous goods. To accomplish this, the CCRA has updated existing EDI ANSI cargo and conveyance maps and introduced new multi-modal EDIFACT cargo and conveyance maps as well as new EDIFACT and ANSI 311 X12 maps for the reporting of supplementary cargo data. Marine carriers and freight forwarders can choose to use either the EDIFACT or ANSI maps;
eliminate the presentation of paper, primary cargo and conveyance documents for imports and in-transit reporting by requiring electronic transmission of data within specified timeframes prior to arrival in Canada;
establish EDIFACT and ANSI maps to allow A6 outward marine conveyance and A6A marine export cargo data to be transmitted electronically within specified timeframes. Please refer to the Reporting of Exported Goods Regulations for export reporting requirements.
provide for the identification of multiple export transaction identifiers (CAED, B13A, G7 Electronic export) and in-bond cargo control numbers for overland in-transit movements for ocean vessel export on the A6A export map as well as for the acquittal of cargo control documents that match the previous cargo control number reported;
require electronic reporting of cargo data, including cargo which will be Freight Remaining on Board (FROB) ocean vessels in Canada, 24 hours prior to loading in the foreign port (other than goods laden in the United States). For bulk good or authorized break bulk goods, the electronic reporting of cargo data must be provided 24 hours prior to arrival in Canada.
provide a facility for the electronic reporting of key supplementary cargo data by freight forwarders 24 hours prior to loading, using a pre-approved 8000 series carrier code. Freight forwarders who choose not to transmit 24 hours prior to loading will be required to provide this data directly to the ocean carrier. The transmission of this data will be used to supplement primary cargo data reported by the carrier and will not constitute full secondary document reporting. In addition, marine carriers may also submit supplementary cargo data using their 9000 series carrier code.
maintain paper-based house bill and abstract reporting subject to the same reporting timeframes as today, i.e. on or before the arrival of the shipment at the primary port of destination;
ÓCCRA, 2003 6
ACI EDI Marine Cargo/Conveyance Reporting PRD Version 0.5 FINAL DRAFT
provide the warehouse location for goods upon their arrival into Canada for trade examination and release notification purposes;
eliminate split shipments for marine;
maintain current OGD processing requirements; and
develop a data quality review and ongoing monitoring process to ensure the integrity of data for risk assessment processing.
ÓCCRA, 2003 7
ACI EDI Marine Cargo/Conveyance Reporting PRD Version 0.5 FINAL DRAFT
4.0 CCRA EDI MARINE SYSTEM OVERVIEW
4.1 Background
The Canada Customs Electronic Data Interchange (EDI) Marine Cargo System was implemented in 1996 in response to the needs of both business and government for a more efficient facility for the reporting of cargo information. The EDI Cargo System was designed to:
promote the use of EDI in Canada and around the world; better enable Canadian companies to apply Just-In-Time inventory principles
that are essential to Canadian competitiveness; expedite cargo reporting and movement of cargo through ports and across the
country hence, increasing the competitive position of Canadian ports; ease the paper burden and provide cost savings to both the system participants
and the CCRA; improve the timeliness and accuracy of data; and provide the foundation for release transmissions from importers and brokers.
The EDI Marine Cargo System receives and processes transmitted cargo and conveyance information 24 hours a day, seven days a week. It also combines the automated transmission of cargo information with the ability to perform automatic selectivity and automatic creation of open cargo inventory records in the Accelerated Commercial Release Operations Support System (ACROSS). As a result, the requirement for hard copies of customs cargo and conveyance documentation is eliminated for system participants except for contingency purposes and the export program.
4.2 Operating Environment
CCRA Mainframe Automation Services
The Agency currently has a large number of automated operational support systems, spanning several mainframe computers. Marine service options reside in the Accelerated Commercial Release Operations Support System (ACROSS).
Customs Electronic Commerce Platform (CECP)
In an attempt to address multiple EDI demands, Customs has implemented an Electronic Commerce Platform.
The CECP provides host, security and network interface functions for the EDI process. Operational components of security, accounting, exception processing, and re-start/recovery are also provided by the CECP. This implementation provides CCRA the following advantages:
a common interface to/from the Customs mainframe application
ÓCCRA, 2003 8
ACI EDI Marine Cargo/Conveyance Reporting PRD Version 0.5 FINAL DRAFT
support for multiple network interfaces and EDI message standards (public and private)
flexible system design, utilizing modular approach, to facilitate expansion of EDI systems; and high availability, security, and reliability.
4.3 EDI Communication Options
Please note: The CCRA does not endorse any particular service and its responsibility is limited to making this information available to clients. Any decision on transmission services is the client’s and any agreement to purchase is strictly between the vendor and the client. Before submitting an application for Electronic Data Interchange (EDI) services, the client is to ensure that the transmission option chosen is available for the Customs application they wish to use. The client is responsible for all transmission costs to the CCRA.
There are currently five options for clients to transmit EDI to the CCRA's host system. Below is a brief description of each.
VAN (Value Added Network): A VAN is a public EDI network which provides an opportunity to exchange EDI transactions with a large number of trading partners using a single communication interface. VANs generally offer a wide range of EDI services. Clients will be responsible for the payment of their VAN connection and membership fees as well as for the transmission of their messages through the VAN to Customs. A list of VANs is available on request from the Electronic Commerce Unit (ECU).
Third Party Service Provider: There are a variety of approved third party service providers who currently transmit data to the CCRA, using a variety of different communication modes. A list of EDI capable service providers is available on request from the Electronic Commerce Unit (ECU).
Customs Internet Gateway (CIG): The CCRA developed the CIG to provide clients a method to transmit and receive data over the Internet. The CCRA adopted a Public Key Infrastructure (PKI) to provide for the security and integrity of the data. Clients are required to purchase the Entrust software for encryption and decryption and to develop or purchase the protocol software to connect to the CIG. Clients would need to transmit the data from a Canadian office as the certificate is only assigned to a device in Canada.
CADEX Communication Line: A CADEX line consists of a point-to-point connection (3770 SNA/RJE protocol) between the host program at the CCRA and the remote device on the client’s side. For information on acquiring a CADEX communication line, please contact the Electronic Commerce Unit (ECU).
Direct Connect to CCRA: The Direct Connect is a more expensive alternative (approximately $45K in set-up costs and $15K in annual costs), but provides clients with a direct connection to the CCRA.
ÓCCRA, 2003 9
ACI EDI Marine Cargo/Conveyance Reporting PRD Version 0.5 FINAL DRAFT
5.0 BUSINESS FLOW DIAGRAM
The following section explains the business and system flow of marine reports within the context of the new business and system rules.
5.1 Import/In-transit/FROB Processing- Figure 1
Figure 1: Import/In-transit/FROB Business Flow
It is important to note that the requirements pertaining to the Crew List, Ship's Stores Declaration, Crew's Effect Declaration and any other documentation currently required by Customs or other government departments upon vessel arrival do not change. The only documents replaced by EDI are the conveyance report and the cargo report
Figure 1 represents the various entities and processes involved in processing EDI import/in-transit/FROB marine conveyance, cargo and supplementary cargo data for shipments laden in countries other than the United States. Note that for bulk cargo and authorized break bulk cargo and their conveyance, the advance transmission timeframe is a minimum of 24 hours prior to arrival in Canada.
1a) At least 24 hours prior to loading, the carrier or agent for the vessel carrier prepares an EDI transmission reporting A6A cargo data.
ÓCCRA, 2003 10
ACI EDI Marine Cargo/Conveyance Reporting PRD Version 0.5 FINAL DRAFT
1b) If there are consortium carriers, they must report their A6A cargo data via EDI at least 24 hours prior to loading.
1c) If supplementary cargo data is to be reported by either the carrier or freight forwarder, it must also be transmitted via EDI at least 24 hours prior to loading.
1d) The vessel carrier must report the A6 conveyance data via EDI within 24 hours of the vessel departing the last port of loading (not including a U.S. port) prior to its continuous journey to Canada.
1e) Carriers must report their A6A empty container data via EDI within 24 hours of the vessel departing the last port of loading (not including a U.S. port) prior to its continuous journey to Canada.
2) If the cargo is moving inland on other than the prime manifest, an agent for the carrier must present secondary cargo documents in the form of paper house bills, remanifests or abstracts upon arrival at the Canadian port before the cargo can be permitted to move inland.
3) All marine conveyance, cargo and supplementary cargo data will be validated and processed through EDI and Risk Assessment processing.
4) If there are validation errors on any transmissions, a reject notice will be electronically transmitted to the sender outlining the field in error. All transmissions that pass validation will generate a positive acknowledgement message transmitted to the sender indicating the data has been successfully processed.
ÓCCRA, 2003 11
ACI EDI Marine Cargo/Conveyance Reporting PRD Version 0.5 FINAL DRAFT
5.2 Export Processing- Figure 2
Figure 2: Export Business Flow
Figure 2 represents the various entities and processes involved with the processing of EDI marine export conveyance and cargo data. EDI reporting of conveyance and cargo data is not mandatory for exports.
1a) Within 72 hours after departure from the Canadian port, the carrier or agent for the vessel carrier prepares an EDI transmission reporting A6A cargo data.
1b) If there are consortium carriers, they also must report their A6A cargo data within 72 hours of departing the Canadian port.
1c) The vessel carrier must report the A6 conveyance data 72 hours after departing the Canadian port. Consortium carriers will also submit individual A6’s within that same timeframe. Note that the requirement to provide the paper A6 conveyance outbound report prior to departure remains mandatory even if an electronic conveyance report is transmitted.
2) CECP/ACROSS will validate and process the data through the various service options business rules.
3) All accepted EDI marine A6 conveyance and A6A cargo data reported via EDI will be extracted to Statistics Canada.
ÓCCRA, 2003 12
ACI EDI Marine Cargo/Conveyance Reporting PRD Version 0.5 FINAL DRAFT
4) If there are validation errors on any transmissions, a reject notice will be electronically transmitted to the sender outlining the field in error. All transmissions that pass validation will generate a positive acknowledgement message transmitted to the sender indicating the data has been successfully processed.
5.3 Design Considerations
The following should be considered when designing your ACI marine system:
The vessel carrier must report via EDI the A6 inward conveyance data within 24 hours of departing the last foreign port of loading (not including a U.S. port) on its continuous journey to Canada for the first Canadian port of arrival. Reports to subsequent Canadian ports will continue to be presented to Customs by paper.
Paper reporting for an offshore inward conveyance will be eliminated.
The vessel carrier must inform consortium carriers of the A6 Conveyance Reference Number (CRN) that includes the vessel carrier code and the vessel report number.
Electronic import, in-transit, and FROB cargo data will be required at least 24 hours prior to the estimated time of loading of the cargo onto the vessel.
Bulk cargo and authorized break bulk cargo and their conveyance data will be required a minimum of 24 hours prior to arrival in Canada.
Paper reporting of the cargo data will be eliminated.
If the data does not meet the validation rules, a reject notice is transmitted to the sender based on the method of transmission of the request. The data must be retransmitted 24 hours prior to loading in order to meet the requirements of the 24-hour rule.
o When the cargo has not been authorized to load as a result of not adhering to the 24-hour rule, the client must send in a change with the new vessel the cargo is to be loaded onto, a new estimated date and time of loading, or a cancellation for the cargo.
If the data meets the validation rules, an acknowledgement notice will be triggered based on the method of transmission of the request. This does not in and of itself constitute authority to load. Please refer to Appendix C, Import, In-transit, and FROB Reporting for further details.
Changes to cargo data should be made as soon as they are known. Key data corrections will result in the restart of the 24-hour clock if the vessel has not yet departed (see details in section 6.4 Process EDI Data.)
Details regarding Do Not Load, Hold, Do Not Unload and Cancellation Messages are outlined in section 7.0 Outbound Messages.
As today, the CCN will be reusable after three years plus one month.
The current requirement that the marine inward conveyance report (A6) be received and processed in the Customs system prior to the receipt of the A6A cargo report no longer applies. That is, A6A cargo documents may be transmitted before or after the A6 conveyance report.
ÓCCRA, 2003 13
ACI EDI Marine Cargo/Conveyance Reporting PRD Version 0.5 FINAL DRAFT
Consortium carriers should no longer transmit an A6 inward conveyance report.
If supplementary cargo data is received and the primary cargo document indicates that no supplementary cargo data is required, the A6A cargo document will be rejected.
Electronic reporting of supplementary cargo data will be required at least 24 hours prior to loading of the cargo on the vessel. Supplementary cargo data may only be transmitted for import, in-transit, and FROB. The carrier code used must belong to either a freight forwarder (8000 series) or a marine carrier (9000 series).
Supplementary cargo reports received for an empty container primary cargo document will be rejected.
Multiple supplementary cargo reports can be transmitted for one primary cargo report.
The supplementary cargo report will be accepted if the related primary cargo report is not on file. When the primary cargo report is captured, the supplementary cargo report will then be related to the primary cargo report. In addition, the supplementary cargo report will also be rejected if the container listed on the supplementary cargo report does not match the container on the primary document.
All cargo descriptions must be accurate and precise. The following are examples of what will no longer be acceptable: Freight of All Kinds (FAK); Shippers Load and Count; Said to Contain.
Cargo reports for empty containers in international shuttle service will be required to be reported via EDI within 24 hours after departure of the vessel from the last foreign port of loading.
Clients will have the option of reporting an export cargo and conveyance by paper or electronically. If EDI is chosen by the client, the A6 outward conveyance report and the A6A export cargo report must be transmitted to Customs within 72 hours after departing the Canadian port. However, the A6 outward report must be transmitted first, followed by the A6A export cargo report. If the client reports via paper, the current processes will be maintained in that the client will present the required paper documents directly to Statistics Canada.
5.4 Program Monitoring
The following points reflect the processes involved in monitoring client compliance and the quality of data being reported.
Headquarters (HQ) program personnel will monitor the compliance of the external client.
HQ Program personnel will monitor that the client is reporting quality data is within the standards defined in the PRD.
The reviewing officer may contact the client to discuss corrective action in terms of improving the data quality of the transmissions or any compliance issues.
ÓCCRA, 2003 14
ACI EDI Marine Cargo/Conveyance Reporting PRD Version 0.5 FINAL DRAFT
6.0 ACI, EDI SYSTEM FLOW
6.1 Message Format
The transaction sets and code sets defined in Appendix E are to be used in the message transmission. Samples of coded messages are provided in Appendix C.
It is important to note that:
all data must be transmitted in UPPER CASE; all data must be left justified; asterisks (*) must be used to separate each data element within a segment; asterisks must be used to represent any data element that is not being used; asterisks must not be used within any data element field; and
Questions regarding the specific use of the Customs messages should be discussed with Client Representatives.
6.2 Data Element Requirements
The message format, transaction and codes sets are subject to change as EDI technology, message standards, data elements and code sets evolve. Before changing to a new version or standard, Customs will send out a notice of intent to upgrade.
The data elements listed and defined in the Segment Purpose Diagram and shown on the maps in Appendix C must be transmitted. The list of data elements and their business definitions are also provided in Appendix D.
The first character of the Report Number must be an 'E' to identify an EDI transaction or 'CE' in the case of consortium reporting.
Dangerous goods information is to be supplied, when applicable, in the marks and numbers field.
6.3 Receive Data Via EDI
The external clients will electronically transmit marine conveyance data and marine import, in-transit, FROB, supplementary and/or export data. The external clients also will be responsible for the electronic reporting of empty containers in international shuttle service.
When a client transmits an electronic report, the request will undergo a series of validations at point of receipt. EDI Receipt ends when the data is stored in the format in which it was sent and the appropriate acknowledgement notice to indicate successful receipt of the transmission is sent to the applicable sender.
The following identifies the steps the system undergoes to receive and accept EDI data:
ÓCCRA, 2003 15
ACI EDI Marine Cargo/Conveyance Reporting PRD Version 0.5 FINAL DRAFT
receives transmissions from the client;
authenticates the sender by verifying against the sender profile. This will confirm that the sender is valid for the specific message standard;
accepts sender, if authentication proves valid; or rejects sender, if authentication proves invalid;
verifies that:
the transmission contains the appropriate number of segments;
the data elements in each segment are present and that the structure of the cargo data meets syntax rules;
the size (min / max) and format (numeric / alphanumeric / coded values) requirements are met;
the segments are properly defined;
the segments appear in proper order;
document contains the correct number of loops;
converts data to readable format for next steps in processing; and
sends an electronic acknowledgment notice to the sender, if no syntax errors are found; or sends an electronic reject message to the sender, if any syntax errors are found.
Other Requirements:
1. If syntax errors occur, a reject message with the appropriate reason code will be sent back to the initiator via the same route as the incoming transmission. Refer to Appendix F for a list of error codes.
2. If the EDI facility is unavailable due to Customs system outages, the client will present paper bills of lading as a contingency.
3. The primary carrier can submit the cargo, supplementary cargo, empty container data, and conveyance in either ANSI 311 or UN EDIFACT. The freight forwarders may only submit the supplementary cargo data, but may do so in either ANSI 311 or UN EDIFACT.
6.4 Process EDI Data
The processing of marine conveyance and cargo data begins after the electronic transmission has been received and has successfully passed the CECP initial verification. When the transmission has been received by the system, it will subsequently be processed according to the validation, store, status and trigger notice rules applicable to that service option.
If the data fails to pass validation, an electronic reject notice will be transmitted to the original sender of the message. Otherwise, an electronic acknowledgement of the successful process of the information will be generated and transmitted electronically to the original sender.
Clients are provided the functionality to add, change and delete cargo reports (A6As), supplementary cargo reports (S10s), empty container reports (E10s), and conveyance reports (A6s).
ÓCCRA, 2003 16
ACI EDI Marine Cargo/Conveyance Reporting PRD Version 0.5 FINAL DRAFT
Add/Change/Delete Procedures
Adds are used for the first submission of any data, be it a cargo, supplementary, empty container or a conveyance report data. Multiple records of the same type (i.e., all A6A, all S10, all E10, or all A6) may be added at the same time. However, cargo, supplementary, empty container, and conveyance reports must not be mixed within the functional group.
Deletes are to be used for the complete removal of records or packages of records of the same type. If deletions to individual data elements or loops of segments are desired, these must be processed as a change. Where the cargo control number or the conveyance reference number is incorrect, a delete and add must be submitted with the correct number. Multiple records of the same type (i.e., all A6A, all S10, all E10, or all A6) may be deleted at the same time. However, like adds and changes, deletes for cargo, supplementary, empty container, and conveyance reports must not be mixed within the functional group.
Changes may be made at any time after the add has been processed up until time the cargo is released. A change to a record may not be sent in the same transmission as the add for that same record. A change involves the transmission of the entire record, which will replace the entire original record. Individual data elements may not be transmitted separately. Carriers will be required to amend the A6 report to advise CCRA of situations such as bunker calls, unscheduled ports of call, ETA or changes to the vessel itinerary as well as any other changes to data. Multiple records of the same type (i.e., all A6A, all S10, all E10, or all A6) may be changed at the same time. However, like adds and deletes, changes to cargo, supplementary, empty container and conveyance reports must not be mixed within the functional group.
Changes made to cargo data elements before the departure of the vessel from the port of loading of the cargo will restart the 24-hour rule clock; that is to say the cargo cannot be loaded on the vessel for at least 24 hours from the time an acknowledgement for the change transmission is received by the client from the Customs system. If the change was submitted in response to a Hold - Request For More Information notice, loading can proceed once a Remove Hold notice is received.
Electronic corrections, by carriers and freight forwarders, will be allowed up to the point of final release status of the goods or manual acquittal e.g., E29B. Requests for corrections after release must be presented on paper to the local Customs office.
ÓCCRA, 2003 17
ACI EDI Marine Cargo/Conveyance Reporting PRD Version 0.5 FINAL DRAFT
7.0 OUTBOUND MESSAGES
There are three types of outbound messages clients can expect from the Customs system: acknowledgement messages, reject messages, and Do Not Load, Hold, Do Not Unload and Cancellation Messages.
7.1 Acknowledgement Messages
The Customs system will transmit acknowledgments back to the initiator. Once the notice has been translated it is sent out to the initiator via the same route as the incoming transmission
Two types of acknowledgment notices can be sent to the client:
1. ANSI X12 997 Positive Functional Acknowledgment message are used to acknowledge acceptance of correct functional group syntax data, transaction set syntax data, segment syntax data, and data element syntax data.
2. ANSI X12 824 Application Advice Acknowledgement message are used to acknowledge acceptance of transmitted data. An ANSI X12 824 Application Advice Acknowledgment indicates that the transmitted data has been validated for specific edits by the Customs system and has passed those edits.
ANSI X12 997 and ANSI X12 824 Acknowledgement messages can be sent in response to A6 conveyance reports, A6A cargo reports, S10 supplementary reports, and E10 empty containers in shuttle service reports.
Appendix F contains ANSI X12 997 and ANSI X12 824 mappings used by Customs.
7.2 Reject Messages
The Customs system will transmit reject messages back to the initiator. Once the notice has been translated it is sent out to the initiator via the same route as the incoming transmission.
Two types of reject messages can be sent to the client:
1. ANSI X12 997 Negative Functional Acknowledgment messages are used to indicate a functional group syntax error, transaction set syntax error, segment syntax error, and/or data element syntax error.
A reject message will indicate the nature of any error. It will contain the following: identification of the syntax error and a repeat of the transmitted data that is in error, if appropriate.
ÓCCRA, 2003 18
ACI EDI Marine Cargo/Conveyance Reporting PRD Version 0.5 FINAL DRAFT
The following are the types of errors a client can expect to see from the EDI Cargo System:
a. functional group syntax errors which refer to errors in the way a transmission was structured;
b. transaction set syntax errors which refer to errors in the way a specific message, for example, a conveyance report or cargo report was structured;
c. segment syntax errors which refer to errors in the way a series of data elements or fields were strung together; and
d. data element syntax errors which refer to errors in a specific field.
A specific error will cause only the specific message within which it occurred to be rejected. For example, if a transmission contains several cargo reports where one cargo report contains a syntax error, only that specific cargo report will be rejected.
The exception to this occurs when an error is made in the functional group syntax, in which case the entire transmission will be rejected.
With respect to functional group syntax errors, the following codes will be used:a. functional group not supported;b. functional group version not supported;c. functional group trailer missing;d. data interchange control number in the functional group header and trailer do not
agree; ande. number of included transaction sets does not match the actual count.
With respect to transaction set syntax errors, the following codes will be used:
a. transaction set not supported;b. transaction set trailer missing;c. transaction set control number in header and trailer do not match;d. number of included segments does not match actual count;e. one or more segments in error;f. missing or invalid transaction set identifier; andg. missing or invalid transaction set control number.
A transaction error with the code '5' will mean that the Cargo Control Number is in error. For example, this can occur because the Cargo Control Number is a duplicate.
With respect to segment syntax errors, the following codes will be used:
a. unrecognized segment identification;b. unexpected segment;c. mandatory segment missing;d. loop occurs over maximum times;e. segment exceeds maximum use;f. segment not in defined transaction set; andg. segment not in proper sequence.
ÓCCRA, 2003 19
ACI EDI Marine Cargo/Conveyance Reporting PRD Version 0.5 FINAL DRAFT
With respect to data element syntax errors, the following codes will be used:
a. mandatory data element missing;b. conditional required element missing;c. too many data elements;d. data element too short;e. data element too long;f. invalid character in data element;g. invalid code value;h. invalid date; andi. invalid time.
2. ANSI X12 824 Application Advice reject messages are used to respond to application specific edits. An ANSI X12 824 Application Advice reject message indicates that the transmitted data has been validated for specific edits by the Customs system and one or more errors have been detected. This message will also allow clients to easily identify the reason for the rejected transmission(s). Element 02 of the TED segment refers to a list of error codes found in Appendix F. The data should be corrected and the message re-transmitted to Customs.
ANSI X12 997 Negative Functional Acknowledgement and ANSI X12 824 Application Advice reject messages can be sent in response to A6 conveyance reports, A6A cargo reports, S10 supplementary reports, and E10 empty containers in shuttle service reports.
Appendix F contains ANSI X12 997 and ANSI X12 824 mappings and error messages used by Customs.
7.3 Do Not Load, Hold, Do Not Unload and Cancellation Messages
The Customs system will send Do Not Load, Hold, Do Not Unload and Cancellation messages back to the initiator and other relevant parties. Once the message has been translated it is sent out to the party(ies) via the same EDI route as the incoming transmission. These messages will reference the cargo control number, supplementary reference number, conveyance report number and/or container numbers where applicable.
1. Do Not Load Messages – This type of message may be transmitted to the client(s) prior to the loading of the cargo on the vessel. If a Do Not Load message is received, the cargo is not authorized to be loaded onto the vessel.
A Do Not Load message for an A6A cargo report will be sent to the A6A sender.
ÓCCRA, 2003 20
ACI EDI Marine Cargo/Conveyance Reporting PRD Version 0.5 FINAL DRAFT
A Do Not Load message resulting from an S10 supplementary cargo report will be sent to the A6A cargo report sender and to the supplementary cargo report sender.
A Do Not Load message may be issued prior to the lading of the cargo on the vessel in the foreign port where:
a) Canada Customs requires information pertaining to the cargo such as description of goods, ultimate consignee, shipper. In this case, if the vessel has not departed and the carrier/freight forwarder has additional information pertaining to the cargo that he would like to clarify/correct, he must re-transmit the required data to Canada Customs using the EDI change function. If the vessel has departed without the cargo and the carrier/freight forwarder has additional information pertaining to the cargo that he would like to clarify/correct and the cargo is to be laden on board another vessel, the EDI original request should be cancelled and another EDI original request submitted using a new Cargo Control Number/Supplementary Cargo Report number;
b) Canada Customs requires the carrier to await instructions from the foreign Customs administration; and/or
c) Canada Customs advises that the goods are not to be loaded on any vessel bound for Canada.
If a Do Not Load message is issued, the carrier must not load the cargo until authorization is granted by Canada Customs in the form of a Cancellation message for the Do Not Load (see Cancellations/Removals below).
In the case of an A6A cargo report or a supplementary cargo report, if a Cancellation message is to be issued, the carrier/freight forwarder can expect to receive it prior to the actual date and time of loading.
2. Hold Messages - This type of message may be transmitted to the client(s) subsequent to the loading of the cargo on the vessel in the foreign port.
A Hold message for an A6A cargo report or an E10 empty container(s) report will be sent to the A6A/E10 sender.
A Hold message resulting from an S10 supplementary cargo report will be sent to the A6A sender and where applicable, to the S10 sender.
A Hold message may be issued subsequent to the lading of the cargo on the vessel in the foreign port where:
a) Canada Customs requires information pertaining to the cargo such as delivery address, notify party. In this case, the carrier/freight forwarder must re-transmit the required data to Canada Customs using the EDI change function; and/or
ÓCCRA, 2003 21
ACI EDI Marine Cargo/Conveyance Reporting PRD Version 0.5 FINAL DRAFT
b) Canada Customs may require an examination of the cargo upon arrival.
In cases a) and b) above, the cargo may be unloaded from the vessel in Canada but is not authorized to move until permission is granted by Canada Customs in the form of a Hold Cancellation message (see Cancellations below).
3. Do Not Unload Messages – This type of message may be transmitted to the client(s) subsequent to the loading of the cargo on the vessel. If a Do Not Unload message is received, the cargo is not authorized to be unloaded from the vessel in Canada.
A Do Not Unload message for an A6A cargo report will be sent to the A6A sender and where applicable, to the S10 supplementary cargo report sender.
A Do Not Unload message resulting from an S10 supplementary cargo report will be sent to the A6A cargo report sender and where applicable, to the S10 supplementary cargo report sender.
A Do Not Unload message may be issued subsequent to the lading of the cargo on the vessel in the foreign port where:
a) A review by Canada Customs has resulted in the determination that the cargo may not be unloaded in Canada.
In this case, a cancellation message will not be issued.
4. Cancellation Messages - This type of message may be transmitted to the client(s) any time subsequent to the issuance of Do Not Load, Hold and Do Not Unload messages in order to cancel these instructions. Cancellation messages will be sent to the recipients of the Do Not Load, Hold and Do Not Unload messages as appropriate.
ÓCCRA, 2003 22
ACI EDI Marine Cargo/Conveyance Reporting PRD Version 0.5 FINAL DRAFT
Message Reasons
The following table indicates the reasons for which a Do Not Load, Hold and/or Do Not Unload messages may be issued.
Report Data ReasonCargo & Supplementary Description of Goods Insufficient
Cargo & Supplementary Consignee Insufficient
Cargo & Supplementary Shipper Insufficient
Cargo & Supplementary Delivery Address Insufficient
Cargo & Supplementary Notify Party InsufficientSupplementary Report --- InsufficientSupplementary Report --- Not SubmittedCargo Receipt Place / Location / Port /
CountryIncorrect
Cargo & Conveyance Port of Loading IncorrectCargo & Conveyance Port of Arrival IncorrectAny type of report --- Failure to provide documentation
Any type of report --- Not authorized
Any type of report --- Wait for Further Instructions
ANSI 824 Application Advice Map
The ANSI 824 Application Advice Map in Appendix F indicates the corresponding Transaction Set Purpose Codes, Application Acknowledgement Codes, and Reference Identification Qualifiers.
Where Reference Identification Qualifiers are concerned:
TG reflects the Conveyance Reference Number. XC reflects the Cargo Control Number (CCN) or the Supplementary Reference Number 7U reflects the Related Transaction Reference Number (ie if Do Not Load, Hold, Do Not Unload,
or Cancellation notice is for cargo, this number will be the related Supplementary Reference Number or if Do Not Load, Hold, Do Not Unload, or Cancellation notice is for Supplementary Cargo Report, this number will be the related Original Cargo Control Number (CCN).
ÓCCRA, 2003 23
ACI EDI Marine Cargo/Conveyance Reporting PRD Version 0.5 FINAL DRAFT
8.0 AVAILABILITY OF THE EDI CARGO SYSTEM
The CECP Platform will be available 24 hours a day, 7 days a week, with an overall target availability rate of 95%. ACROSS will download its messages from the respective method of transmission from the client at regularly scheduled intervals. Customs reserves the right to change the frequency at its discretion. Customs will monitor the system availability.
The EDI Cargo System will, under normal conditions, endeavour to send error messages back through the respective method of transmission from the client within 120 minutes from the receipt of the transmitted messages. However, circumstances beyond Customs control, such as high peak volumes, may cause delays.
ÓCCRA, 2003 24
ACI EDI Marine Cargo/Conveyance Reporting PRD Version 0.5 FINAL DRAFT
9.0 RELIABILITY OF THE EDI CARGO SYSTEM
9.1 Security
Each trading partner shall undertake all steps necessary to prevent unauthorized access to and use of any portion of the EDI Cargo System that is in their control. In addition, each trading partner shall comply with the security procedures as outlined in their respective trading partners list of instructions or instruction manual.
Customs will use dedicated lines to those trading partners who use VANs or who have direct connect. These will have audit trails and password protection within Customs. The same audit trails and password protection is used for trading partners who use CIG, third party service providers and the CADEX lines.
9.2 Confidentiality
Each trading partner shall preserve the confidentiality of information of the other trading partner.
9.3 Authorization
Each trading partner takes responsibility for controlling access by its employees to the EDI Cargo System. Any message received by the CCRA would have been properly processed and authorized by the trading partner.
9.4 Authentication
Authentication refers to each document incorporating criteria permitting the receiver to verify that it is an authentic document of the sender. A password will be incorporated in the functional group segment for this purpose.
In addition, each trading partner will follow the authentication procedures specified in their respective trading partner’s list of instructions or instruction manual.
9.5 Incomplete, Inaccurate or Corrupted Documents
The risk of an undetectable error in transmission is upon the sender. The client is responsible for the cost and maintenance of their data, either through an agreement with their trading partner or through their own facility. The CCRA is not responsible for lost data nor the cost of the retransmission of lost data.
ÓCCRA, 2003 25
ACI EDI Marine Cargo/Conveyance Reporting PRD Version 0.5 FINAL DRAFT
10.0 PROBLEM REPORTING & RESOLUTION
In the event a system and/or procedural problem is discovered by the client, the client will contact a Client Representative. The Client Representative will perform a preliminary assessment and if necessary will log the information in the problem file and send a problem identification report to the EDI IT group.
After an initial analysis, a clarification request may be forwarded to the client should additional information be required.
Once it has been established that the problem is with the Customs system, all relevant data will be compiled and analyzed after which a solution will be determined, tested and implemented.
If the problem is determined to be in the client’s environment, it will be the responsibility of the client to identify the problem area, resolve it and implement a solution.
10.1 Back-Up-Provisions
Customs will keep a back-up of all transmissions received from the respective service providers. Likewise, clients and service providers should keep a back-up of all transmissions sent and received from Customs or other service providers.
10.2 Contingency Plan In The Event Of System Failure
If the EDI Cargo System ceases to be available because of some failure of equipment or services, each party will use its best efforts to continue normal communications between it and the other party by alternate means, and to restore the EDI Cargo System to normal operating condition as soon as is reasonably possible.
Clients must retain the ability to produce hard copy vessel and cargo declarations in the event of disruption of EDI services.
ÓCCRA, 2003 26
ACI EDI Marine Cargo/Conveyance Reporting PRD Version 0.5 FINAL DRAFT
11.0 THE APPLICATION & TESTING PROCESS
11.1 Are You Ready For EDI?
EDI is simply a mechanism for transferring data in a machine-usable form from one computer system to another. However, EDI's practical application requires certain conditions. Both ends of the link (i.e.: both trading partners) need to be computerized. Telecommunication capability, translator software and back-up provisions will be required.
11.2 The Formal Application Process
Clients who wish to transmit via EDI should complete and submit the formal application in Appendix B to Customs. The application has two purposes: it establishes the client as a potential participant and it provides Customs with basic information on the client, a description of their automated system and their anticipated volumes. Once the application has been processed by Customs, a Client Representative will be assigned to the client and the testing can begin.
11.3 The Memorandum Of Understanding
The Memorandum of Understanding (MOU) in Appendix B represents the agreement between Customs and the client with respect to transmissions. The MOU must be signed by a senior representative of the client’s firm before the client can begin transmission to the EDI Cargo System. Both forms can be faxed to 613-952-9979 to the attention of the Manager, Electronic Commerce Unit.
11.4 The Client Representative
Each participating client will be assigned a Client Representative who will be located at Customs Headquarters. The Client Representative will act as an official contact for the client and will be able to provide additional advice. Technical advice will also be given where possible. However, the Client Representative's role is limited to the EDI Cargo System and Customs operational procedures dealing directly with this system. Each participant will be responsible for the development and implementation of their automated system, both hardware and software.
During the participant’s development stage, the Client Representative will provide assistance on matters such as interpretation of the message standards and code sets.
During the testing phase with Customs, the Client Representative will work closely with the client to:
coordinate transmissions of data;
ensure results of edits are conveyed back to the client both electronically and with follow-up telephone calls;
assist the client in interpreting Customs acknowledgements and error messages;
monitor the client’s progress through the testing stages; and
monitor data quality.
ÓCCRA, 2003 27
ACI EDI Marine Cargo/Conveyance Reporting PRD Version 0.5 FINAL DRAFT
Once the client is in production status, they can contact the EDI hotline at 888-957-7224 for assistance or any problems concerning the transmission of EDI data.
The Client Representative will be available during normal business hours.
ÓCCRA, 2003 28
ACI EDI Marine Cargo/Conveyance Reporting PRD Version 0.5 FINAL DRAFT
12.0 CARRIER AND FREIGHT FORWARDER ACCEPTANCE TESTING
Carriers and freight forwarders interested in participating in the EDI Cargo System must undergo acceptance testing.
12.1 Requirement
During testing, clients are required to satisfy the EDI Cargo System production requirements by successfully completing a series of progressively more complex tests that will verify whether:
various types and volumes of data records are capable of being transmitted;
the quality of the data is acceptable;
the accurate reception of error messages, acknowledgements and other feedback transmissions from the EDI Cargo System is taking place; and
transmissions are error free a minimum of 95% of the time.
To receive information on the testing procedures and the test package, please contact your Client Representative.
ÓCCRA, 2003 29
ACI EDI Marine Cargo/Conveyance Reporting PRD Version 0.5 FINAL DRAFT
ÓCCRA, 2003
APPENDIX AGLOSSARY OF TERMS
30
ACI EDI Marine Cargo/Conveyance Reporting PRD Version 0.5 FINAL DRAFT
APPENDIX A – GLOSSARY OF TERMSThe following terms and acronyms are used predominately throughout this document. The glossary definitions are still in draft status and have yet to go through the required reviews.
TERM CURRENT DEFINITION
A6 General declaration form of inward/outward vessel movement. Note: for specific outward A6 clarification, see Outward Conveyance Report
A6A Freight / Cargo Manifest (marine mode)
ACI Advance Commercial Information.
ACROSS Accelerated Commercial Release Operations Support System
ANSI American National Standards Institute
ASCII format American Standard Code for Information Interchange is a code for representing English characters as numbers.
B13A Export Declaration form. All goods valued at CAN$2,000 or more and destined for consumption in a country other than the United States must be declared to the Canadian Government. Exporters, their agents, and carriers can file export declarations by using the Customs Automated Export Declaration or Form B13A.
Bulk Goods Goods that are loose or in mass, such that they are confined only by the permanent structure of a large container or a transport unit, without intermediate containment or intermediate packaging.
Bunker Call A stop on the voyage to pick up fuel used aboard the ship.
CCN Cargo Control Number
CECP Customs Electronic Commerce Platform (formerly Electronic Commerce Platform)
Cargo Control Number (CCN) Reference Number assigned by the carrier or the carrier's agent to the transport document. The first four digits must represent the carrier's assigned code.
Consignee The name of the party to which the goods are consigned.
Consignor Name of party, which by contract with a carrier consigns or sends goods with the carrier, or has them conveyed by the carrier.
Consortium A formal or informal association of business interests that
ÓCCRA, 2003 31
ACI EDI Marine Cargo/Conveyance Reporting PRD Version 0.5 FINAL DRAFT
jointly engage in an enterprise, the activities of which, are beyond the means of any one party.
Container A receptacle for storing and transporting an assortment of cargo.
Conveyance Taken from Customs Act ss. 2(1). Any vehicle, aircraft or water-borne craft or any other contrivance that is used to move persons or goods.
Conveyance Reference Number (CRN)
A unique reference number assigned by the carrier to identify a particular voyage for a particular conveyance.
Customs System Format Pre-translated data in the custom’s system. This data then goes to the CECP for translation into transmission data format.
Data Transmission A single transmission of data from an external party that can contain one or many reports (i.e. cargo data, conveyance data, appraisal quality data, B3, crew & permit data)
EDI Electronic Data Interchange
Empty Containers in Shuttle Service
Foreign container: A container entering Canada empty may be used in transportation incidental to the international traffic of the goods on the inward leg of an international journey provided it enters Canada to pick up a load for export (Tariff 9801.10.00.00). Canadian Origin containers in shuttle service: Empty containers, originating in Canada, exported therefrom, and returned without having been advanced in value or improved in condition by any process of manufacture or other means, or combined with any other article abroad. (Tariff 9801.00.00.10).
Duty-Paid Containers in shuttle service: Empty containers which have been released and accounted for under section 32 of the Customs Act, have been exported, and are returned without having been advanced in value or improved in condition by any process of manufacture or other means, or combined with any other article abroad. (Tariff 9814.00.00.10)
Estimated Time of Arrival (ETA) - Marine
Generally used in the context of ‘Pre-Arrival’ for the purpose of knowing the approximate time that a vessel will arrive at a dock in Canada
Exporter Name of the party who makes or on whose behalf the export declaration is made and who is the owner of the goods or has similar right of disposal over them at the time when the declaration is accepted.
First Point of Arrival (FPOA) The first place the goods arrive in Canada and can be examined for contraband and health and safety and must be conducted in an area approved by Canada Customs and Revenue Agency that meets operational requirements for examinations. Marine Mode – the first place where the ÓCCRA, 2003 32
ACI EDI Marine Cargo/Conveyance Reporting PRD Version 0.5 FINAL DRAFT
goods are off-loaded from the marine vessel, in Canada and can be examined for contraband and health and safety.
FROB Freight Remaining on Board. Cargo on a vessel that is not being discharged at a Canadian seaport
Freight Forwarder The term “freight forwarder” includes de-consolidators and poolcar operators. A “freight forwarder” is defined as an agent who arranges for the transportation of goods and who may provide other services such as grouping and consolidating shipments, de-stuffing containers, Customs brokerage and warehousing
Function Code The code that indicates whether the function on a report is an original (00), a change (04) or a cancel (01).
HS Code Harmonized System Code. A 10-digit code classifying the goods based on an accurate description. HS Codes are found in the Customs Tariff.
In-transit (marine) The movement of a conveyance/goods through Canada, without disposing of goods or people. An in-transit movement cannot be from a highway frontier port to another highway frontier port.
Manifest Movement Type The term that reflects the A6A application type submitted by the client: import (24), in-transit (23), export (25) or Freight Remaining on Board (26).
OGD Other Government Department
PCCN Previous cargo control number
Participants Requirements Document (PRD)
A document produced by CCRA that sets out the specifications, terms and conditions for reporting goods and conveyances by electronic means.
Pre-arrival Prior to a conveyance or goods arriving in Canada.
Prime Cargo Document The document including all prescribed prime cargo data presented to CCRA by the transporter who physically conveys the cargo into Canada and is therefore responsible for reporting the shipment entering Canada, and is used to control the movement and disposition of the goods until they are released by Customs or the transporter proves, within the time that may be prescribed, that the goods were: (a) destroyed while being so transported; (b) received in a customs office, sufferance warehouse, bonded warehouse or duty free shop; (c) where the goods are designated as ships’ stores by regulations made under paragraph 99(g) of the Customs Tariff, received on board a conveyance of a class prescribed under that paragraph for use on the conveyance in accordance with regulations made under that paragraph; (d) received by another person who is entitled under ÓCCRA, 2003 33
ACI EDI Marine Cargo/Conveyance Reporting PRD Version 0.5 FINAL DRAFT
subsection (1) to transport such goods; or (e) entered into a bonded warehouse or exported. “The cargo control document enables Customs to control the movement of goods being imported and exported to ensure: (a) payment of duty and tax; and (b) compliance with other Acts of Parliament that control, prohibit or regulate the import or export of any specified commodity.” D3-1-1.
Report (electronic) A grouping of data elements required to fulfill a Customs reporting requirement
Secondary Cargo Document The document including all prescribed secondary cargo data (Customs Procedure Codes Abstract/House Bill/Re-manifest) that is presented to CCRA by transporter, freight forwarder, or de-consolidator who has assumed liability for payment of duty and tax as prescribed by the Customs Tariff, Excise Tax Act, Excise Act and the Special Import Measures Act for the cargo or a portion thereof that was originally reported to CCRA on a prime cargo document, and is used to control the movement and disposition of the goods until they are released by Customs, or the transporter proves, within the time that may be prescribed, that the goods were: (a) destroyed while being so transported; (b) received in a customs office, sufferance warehouse, bonded warehouse or duty free shop; (c) where the goods are designated as ships’ stores by regulations made under paragraph 99(g) of the Customs Tariff, received on board a conveyance of a class prescribed under that paragraph for use on the conveyance in accordance with regulations made under that paragraph; (d) received by another person who is entitled under subsection (1) to transport such goods; or (e) exported entered into a bonded warehouse or exported.
Service Option (SO) Options available in ACROSS for the servicing of requests. Service options vary according to the mode of transportation and whether the request is received on paper or via EDI.
Shipment A collection of commercial goods. For a single large shipment, one or more tariffs may apply. A shipment is considered to be a single importer liability. (on a container or a collection of containers destined for a single importer, is a shipment)
Shipper See Consignor
Submission Type Code This code indicates what type of transmission was sent to the customs system, for example Cargo, Conveyance or Supplementary.
Summary Report A summary report is a combination of dimensions and measures values calculated to allow the user to determine the report content by selecting those dimensions and measures. (Used here in the context of export reporting)
ÓCCRA, 2003 34
ACI EDI Marine Cargo/Conveyance Reporting PRD Version 0.5 FINAL DRAFT
Supplementary Cargo Report A set of data elements transmitted by an 8000 or 9000 client to complete an A6A report. Data elements include detailed cargo information that is not available on the original A6A (i.e. ultimate consignee, precise description, & shipper info).
Trade Chain Partner (TCP) External individuals involved in the importation of goods not having direct contact with Customs, e.g. shipper, exporter, vendor, consignee.
UN EDIFACT United Nations Electronic Data Interchange For Administration, Commerce, and Transport. Un/Edifact is the United Nations EDI International message standard.
US BCBP United States Bureau of Customs and Border Protection (Department of Homeland Security). Formerly USCS (United States Customs Service)
ÓCCRA, 2003 35
ACI EDI Marine Cargo/Conveyance Reporting PRD Version 0.5 FINAL DRAFT
ÓCCRA, 2003
APPENDIX B
CLIENT APPLICATION & MEMORANDUM OF UNDERSTANDING
36
ACI EDI Marine Cargo/Conveyance Reporting PRD Version 0.5 FINAL DRAFT
APPENDIX B – CLIENT APPLICATION & MEMORANDUM OF UNDERSTANDING
EDI Cargo System Application Form
Please forward completed application and MOU forms to:Electronic Commerce Unit15th Floor, Sir Richard Scott Building191 Laurier Avenue WestOttawa, Ontario, K1A 0L5Fax : (613)952-9979
SECTION I: APPLICANT IDENTIFICATION
Date of Application: Customs Carrier Code:
Name of Applicant:
Head Office Address:
City:
Province/State: Postal/ZIP Code: Country: Telephone #:
Fax/Telex:
E-Mail: .
Contact Person & Title:
Canadian Business Office (if different from Head Office):
City:
Province/State: Postal/ZIP Code:
Telephone #: Fax/Telex:
E-Mail: .
Contact Person & Title:
ÓCCRA, 2003 37
ACI EDI Marine Cargo/Conveyance Reporting PRD Version 0.5 FINAL DRAFT
SECTION II: BUSINESS INFORMATION
Projected Monthly Business Volume: Conveyance: Cargo: and or Supplementary Cargo Data:
Please circle the Communication Method you will be using:
Value Added Network (VAN) Direct Connect CADEX Line
Customs Internet Gateway (CIG) Third Party Service Provider
Please provide the name of Communication Method:
Sender / Receiver ID: Qualifier:
If not communicating with a Customs approved Service Provider or Communication Method, who will perform the interconnection between the Customs and yourself?
In which official language do you wish to communicate verbally and in written form?
English: French:
ÓCCRA, 2003 38
ACI EDI Marine Cargo/Conveyance Reporting PRD Version 0.5 FINAL DRAFT
MEMORANDUM OF UNDERSTANDING
PART I - SCOPE OF AGREEMENT
This document represents an agreement between the Canada Customs and Revenue Agency and:
Registered Name of Company
Customs Carrier Code
Address of Head Office
Transmission Site
Contact Person(s)
Telephone Number
Fax Number
relating to the access, transmission, security and performance requirements pertaining to the EDI Cargo / Conveyance System.
PART II - SIGNATURE
I of agree to abide by and meet the established standards and conditions as outlined in the Participants Requirements Document. I declare that all information transmitted will be true, accurate and complete.
Date Signature
Witness
ÓCCRA, 2003 39
ACI EDI Marine Cargo/Conveyance Reporting PRD Version 0.5 FINAL DRAFT
ÓCCRA, 2003
APPENDIX C
ANSI MAPS & IMPORTANT INFORMATION
40
ACI EDI Marine Cargo/Conveyance Reporting PRD Version 0.5 FINAL DRAFT
APPENDIX C – ANSI MAPS & IMPORTANT INFORMATION
INTRODUCTION
This message map defines the data elements and structure associated with submitting an Electronic Data Interchange (EDI) message to supply EDI marine conveyance, cargo, supplementary and empty containers in international service data to the Canada Customs and Revenue Agency (CCRA).
These marine messages have been designed using version 4010 of the American Standards Committee (ASC) X12 Standards as controlled by the American National Standards Institute (ANSI).
EXPLANATION OF MESSAGE MAP COLUMNS
The message map contains a number of information columns for each data element. The function and values of the "columns" are described below.
Segment ID
Every ASC X12 segment (a group of associated data elements) is assigned a unique 2 or 3 alphanumeric "Tag" for reference purposes. The tags are defined within the X12 data element directories. It should be noted that the "tag" is transmitted within the EDI messages in the order that they are defined.
Element ID
This column of the map identifies the element position within the ASC X12 message structure. The element position numbers identify the position of a data element within a segment. Simple data elements are assigned the next sequential number in order of occurrence within the segment.
Reference ID/Names
This column provides the assigned Reference Id and the Name of the ASC X12 Segment, Composite, Component, or Simple Data element, as defined in the ASC X12 directories.
Composite Data Element Name
Identifies a high level name of a set of associated data elements. The associated data elements are referred to as "component" data elements. Composites are identified by a single alpha character (C or S) followed by 3 unique numerics.
Component Data Element
Identification of a component data element which is part of a composite data element. Component data elements are identified by unique numbers.
Simple Data Element Name
Name of a unique/individual data element within a segment, a "simple" data element contains one element for a single function/use. Simple
ÓCCRA, 2003 41
ACI EDI Marine Cargo/Conveyance Reporting PRD Version 0.5 FINAL DRAFT
data elements are identified by unique numbers.
Notes
This column of the map provides notes and/or descriptions on the Segments Groups, Segments, and individual data elements. It also will identify the application data elements associated to the ASC X12 data elements. In many cases, mandatory ASC X12 codes are used to qualify the data elements being supplied. In these cases, the description of the ASC X12 codes values are provided.
Attributes
M=MandatoryO=OptionalAN=Alphanumeric characters (a to z, 0 to 9, plus special characters)ID=CodedR=Real NumberNO=NumberDT=DateTM=TimeX=These elements are optional; however, where one value is provided, an immediately preceding or succeeding value must also be provided.
Depending on the message requirement, different rules of "mandatory" or "optional" use of a data element may apply. In addition, a hierarchy of rules apply, if a segment or composite data element is optional, but it is used (based on the condition) some of the subordinate elements may be mandatory. In addition to the status, some segments may be repeated more that once within a message, if there is a repeat factor this is also specified in this column.
Where segments are concerned, where a “/”appears between two numbers, the number before the “/” indicates minimum number of occurrences of the segment. The number after the “/” indicates the maximum number of occurrences of the segment.
Where simple data elements are concerned, where a “/”appears between two numbers, the number before the “/” indicates the minimum length of the data element. The number after the “/”indicates the maximum length of the data element.
Codes
This column provides the details of the content of the data element, the expected values/codes or the applicable application data element to be supplied. In the case of Date/Time data elements the format of the date/time is also defined.
DEFAULT SYNTAX
The ASC X12 message structure is formatted using an asterisk (*) to control the position of data within a segment. In some cases, optional/conditional data elements within a segment must be
ÓCCRA, 2003 42
ACI EDI Marine Cargo/Conveyance Reporting PRD Version 0.5 FINAL DRAFT
“skipped” (if they are not used). In these cases, more than one asterisk will be required after a particular data element.
Please Note there are two base maps for ACI EDI Marine Cargo and Conveyance Reporting: the A6A cargo map and the A6 conveyance map. The other three maps –supplementary cargo, empty container, and export cargo - are derived from the A6A cargo map. Multiple maps were developed in an effort to provide a clearer and simpler visual representation of the reporting requirements depending on the client and the nature of the client’s business.
Import, Intransit and FROB Cargo Reporting The carrier will transmit an A6A cargo report for imports, in-transit or FROB at least
24 hours in advance of loading of the cargo in the foreign port. The A6A will have an indicator to advise if supplementary cargo data is required and a supplementary cargo report will be transmitted. When the Supplementary Data Required indicator is “Y” on the A6A, the carrier will provide an estimated date and time of loading (EDTL) for the cargo.
For primary cargo reports where the Supplementary Data Required Indicator indicates that supplementary cargo data is required, the estimated date/time of lading will be used to determine the 24 hour “prior to loading” timeframe for the commencement of risk assessment processing.
If the supplementary cargo data has not been received 24 hours prior to the estimated date and time of loading, Customs will generate an outbound message to the client for the cargo concerned. It should be noted that supplementary cargo data can precede the primary cargo report.
For cargo reports where the Supplementary Data Required Indicator indicates that supplementary cargo data is not required, the cargo should be considered authorized to load onto the conveyance if no Do Not Load or Hold Messages is received indicating that the cargo should not be loaded, 24 hours after receipt of the transmission acknowledgement.
If the transmission is rejected by the CECP or the Customs system, the client will transmit a correction.
Corrections to cargo data should be made as soon as they are known. Electronic corrections by carriers and freight forwarders will be allowed up to the point of final release status of the goods or manual acquittal e.g., E29B. Requests for corrections after release must be presented on paper to the local Customs office.
Changes made to cargo data elements before the departure of the vessel from the port of loading of the cargo will restart the 24-hour rule clock; that is to say the cargo cannot be loaded on the vessel for at least 24 hours from the time an acknowledgement for the change transmission is received by the client from the Customs system. If the change was submitted in response to a Hold - Request For More Information notice, loading can proceed once a Remove Hold notice is received.
Any rejects that the client does not correct will be considered as a non-report of cargo and, therefore, the cargo will not be considered as authorized to be loaded onto the vessel.
ÓCCRA, 2003 43
ACI EDI Marine Cargo/Conveyance Reporting PRD Version 0.5 FINAL DRAFT
Upon receipt of a transmission that meets system edit rules, Customs will issue an acknowledgement message.
If an acknowledgement message is not received, the carrier/freight forwarder must resubmit corrected data for the cargo within the reporting timeframes specified above.
After the data is successfully transmitted the originator will receive an Acknowledgement Notice from the Customs system. If the transmission does not meet system edit rules, Customs will issue a reject validation message where possible (i.e. when the system can identify the transmitter of the data). Please refer to section 7.0 Outbound Messages for the list of possible notices that can be received.
Note: CCRA will not notify the carrier/freight forwarder of the authorization to load. However, if a “No Load” notice has been issued and further information is received that results in a change of decision, a new notice will be sent regarding the change of decision.
Import and in-transit cargo data can be accepted in the system prior to a conveyance report being on file.
The carrier must identify any dangerous goods using the UN Dangerous Goods code.
The commodity description should be in plain language, accurate, and detailed enough to allow Customs to identify the size, shape and characteristics of the commodity.
Goods in a cargo container are required to be reported electronically to Customs at least 24 hours prior to loading the goods on board the ship that transports those goods to Canada.
Bulk goods on board a ship bound for Canada, are required to be reported electronically to Customs at least 24 hours prior to arrival in Canada.
Goods other than bulk or containerized are required to be reported electronically to Customs at least 24 hours prior to loading the goods on board the ship that transports those goods to Canada, unless otherwise authorized by CCRA. Where an authorization is granted, the cargo data for those goods must be transmitted electronically to Customs at least 24 hours prior to arrival in Canada. Please refer to Customs Notice N-542 for information on obtaining authorizations.
If goods (other than bulk goods), for which a cargo report has been transmitted, are removed from a ship prior to arrival in Canada, and then laden aboard another ship for transporting to Canada, the carrier must transmit this new information electronically to Customs at least 24 hours prior to loading on board the ship that transports those goods to Canada.
All goods laden in a country other than the United States, on board a ship bound for Canada that remain on board that ship (i.e., Freight Remaining On Board (FROB)) while in-transit to a third country (including the United States), must comply with the requirement to provide advance notice of cargo information within the timeframes noted above, unless otherwise exempted by Customs. All goods laden in the United States, on board a ship bound for Canada will be exempt from the requirement to provide advance electronic notice of cargo information.
ÓCCRA, 2003 44
ACI EDI Marine Cargo/Conveyance Reporting PRD Version 0.5 FINAL DRAFT
ÓCCRA, 2003
A6A MARINE CARGO MAP FOR IMPORT, INTRANSIT
AND FROB
45
A6A MARINE CARGO MAP FOR IMPORT, INTRANSIT AND FROB
Interchange and Functional Group Headers and Trailer to ANSI 311 Canadian Customs InformationSegment ID Element Reference ID/Name Notes Attributes CodesISA Interchange Control Header To start and identify an interchange of zero or
more functional groups and interchange-related control segments
M 1/1
01 (I01) Authorization Information Qualifier
Code to identify the type of information in the Authorization Information
M ID 2/2 00 - No Authorization Information Present (No Meaningful Information in I02)
02 (I02) Authorization Information Information used for additional identification or authorization of the interchange sender or the data in the interchange; the type of information is set by the Authorization Information Qualifier (I01)
M AN 10/10
03 (I03) Security Information Qualifier
Code to identify the type of information in the Security Information
M ID 2/2 00 No Security Information Present (No Meaningful Information in I04)
04 (I04) Security Information This is used for identifying the security information about the interchange sender or the data in the interchange; the type of information is set by the Security Information Qualifier (I03)
M AN 10/10
05 (I05) Interchange ID Qualifier Qualifier to designate the system/method of code structure used to designate the sender or receiver ID element being qualified
M ID 2/2
06 (I06) Interchange Sender ID Identification code published by the sender for other parties to use as the receiver ID to route data to them; the sender always codes this value in the sender ID element
M AN 15/15
07 (I05) Interchange ID Qualifier Qualifier to designate the system/method of code structure used to designate the sender or receiver ID element being qualified
M ID 2/2 ZZ Mutually Defined
08 (I07) Interchange Receiver ID Identification code published by the receiver M AN 15/15
Version 4010Import/In-transit/FROB
46
Interchange and Functional Group Headers and Trailer to ANSI 311 Canadian Customs InformationSegment ID Element Reference ID/Name Notes Attributes Codes
of the data; When sending, it is used by the sender as their sending ID, thus other parties sending to them will use this as a receiving ID to route data to them
09 (I08) Interchange Date Date of the interchange M DT 6/6 Still six digits10 (I09) Interchange Time Time of the interchange M TM 4/411 (I10) Interchange Control
Standards Identifier Code to identify the agency responsible for the control standard used by the message that is enclosed by the interchange header and trailer
M ID 1/1 U - U.S. EDI Community of ASC X12, TDCC, and UCS
12 (I11) Interchange Control Version Number
This version number covers the interchange control segments
M ID 5/5 00401
13 (I12) Interchange Control Number
A control number assigned by the interchange Sender
M NO 9/9
14 (I13) Acknowledgment Requested
Code sent by the sender to request an interchange acknowledgment (TA1)
M ID 1/1 0 – No Acknowledgment RequestedCanada Customs does not currently provide this functionality
15 (I14) Usage Indicator Code to indicate whether data enclosed by this interchange envelope is test, production or information
M ID 1/1 T – TestP – Production
16 (I15) Component Element Separator
Type is not applicable; the component element separator is a delimiter and not a data element; this field provides the delimiter used to separate component data elements within a composite data structure; this value must be different than the data element separator and the segment terminator
M 1/1
GS Functional Group Header To indicate the beginning of a functional group and to provide control information
M 1/1
01 (479) Functional Identifier Code
Code identifying a group of application related transaction sets
M ID 2/2 SO – Ocean Shipment Information
Version 4010Import/In-transit/FROB
47
Interchange and Functional Group Headers and Trailer to ANSI 311 Canadian Customs InformationSegment ID Element Reference ID/Name Notes Attributes Codes
02 (142) Application Sender’s Code
Code identifying party sending transmission; codes agreed to by trading partners
M AN 2/15 Canada Customs Carrier Code
03 (124) Application Receiver’s Code
Code identifying party receiving transmission. Codes agreed to by trading partners
M AN 2/15 A6A – Cargo
04 (373) Date Date expressed as CCYYMMDD M DT 8/805 (337) Time Time expressed in 24-hour clock time as
follows: HHMM, or HHMMSS, or HHMMSSD, or HHMMSSDD, where H = hours (00-23), M = minutes (00-59), S = integer seconds (00- 59) and DD = decimal seconds; decimal seconds are expressed as follows: D = tenths (0-9) and DD = hundredths (00-99)
M TM 4/8
06 (28) Group Control Number Assigned number originated and maintained by the sender
M NO 1/9
07 (455) Responsible Agency Code
Code used in conjunction with Data Element 480 to identify the issuer of the standard
M ID 1/2 X – Accredited Standards Committee X12
08 (480) Version / Release / Industry Identifier Code
Code indicating the version, release, subrelease, and industry identifier of the EDI standard being used, including the GS and GE segments; if code in DE455 in GS segment is X, then in DE 480 positions 1-3 are the version number; positions 4-6 are the release and subrelease, level of the version; and positions 7-12 are the industry or trade association identifiers (optionally assigned by user); if code in DE455 in GS segment is T, then other formats are allowed
M AN 1/12 004010
GE Functional Group Trailer To indicate the end of a functional group and to provide control information
M 1/1
01 (97) Number of Transaction Sets Included
Total number of transaction sets included in the functional group or interchange
M NO 1/6
Version 4010Import/In-transit/FROB
48
Interchange and Functional Group Headers and Trailer to ANSI 311 Canadian Customs InformationSegment ID Element Reference ID/Name Notes Attributes Codes
(transmission) group terminated by the trailer containing this data element
02 (28) Group Control Number Assigned number originated and maintained by the sender
M NO 1/9
IEA To define the end of an interchange of zero or more functional groups and interchange-related control segments
M 1/1
01 (I16) Number of Included Functional Groups M NO 1/502 (I12) Interchange Control Number M NO 1/9
Version 4010Import/In-transit/FROB
49
A6A Marine Cargo Report for IMPORT/INTRANSIT/FROB (Bill of Lading) Mapping to ANSI
Segment ID Element Name Notes Attributes CodesST Transaction Set Header To indicate the start of a transaction set and to
assign a control numberM 1/1
01 (143) Transaction set ID M ID 3/3 31102 (329) Transaction set control
numberM AN 4/9
B2A Set Purpose To allow for positive identification of transaction set purpose
M 1/1
01 (353) Transaction Set Purpose Code
Code identifying purpose of transaction set M ID 2/2 00 – original03 – delete04 – change
02 (346) Application Type Code identifying an application - to indicate that the transmission is an A6A cargo declaration associated with cargo arriving in Canada for domestic consumption (import), cargo in-transit to the U.S. by any mode of transportation (in-transit), or cargo on board a vessel that is not being discharged at a Canadian Port (FROB)
M ID 2/2 24 - Imported Goods23 - In-transit Goods to US26 - Freight Remaining on Board
N9 Reference Identification To transmit identifying information as specified by the Reference Identification Qualifier
Canada Customs Cargo Control Number (CCN) will be constructed by concatenating the N902s with the following qualifiers:BI - Carrier Code +MA - Report Number + OB - Bill of LoadingAAO- Carrier Assigned Code + MA ZZ - Mutually Defined as Supplementary Data Required indicatorCI - Unique Consignment Reference Number V0 - Version
Note: There can be only 1 BI, 1 MA, 1 OB, 1
M 5/99
MMMMM
OO
Version 4010Import/In-transit/FROB
50
A6A Marine Cargo Report for IMPORT/INTRANSIT/FROB (Bill of Lading) Mapping to ANSI
Segment ID Element Name Notes Attributes CodesAAO, and 1 ZZ.
Any additional N9 segments will not be use by Canada Customs
01 (128) Reference Identification Qualifier
Code qualifying the Reference Identification M ID 2/3 BI - Bonded Cargo Carrier ID numberMA – Cargo Carrier Report Number (may or may not be the same as the vessel carrier’s conveyance report number contained in the AAO).OB - Ocean Bill of LadingAAO – Vessel Carrier Assigned Code + MA (Vessel Carrier’s Conveyance Report number) = (for cargo reporting, this will be the vessel carrier code plus the vessel carrier’s conveyance report number)ZZ - Mutually Defined as Supplementary Data Required IndicatorCI - Unique Consignment Reference Number V0 – Version
02 (127) Reference Identification BI – Carrier Code - unique code assigned to the cargo carrier by Canada Customs
MA – Report Number - a non-duplicating number assigned by carriers that serves to uniquely identify an A6 conveyance - an "E"
M AN 1/35
Version 4010Import/In-transit/FROB
51
A6A Marine Cargo Report for IMPORT/INTRANSIT/FROB (Bill of Lading) Mapping to ANSI
Segment ID Element Name Notes Attributes Codesin the first position of the number indicates an EDI transmission - a "CE" in the first and second positions of the number indicates an EDI transmission and the cargo is on a voyage with consortiums partners. This number may or may not be the same as the vessel carrier’s conveyance report contained in the AAO.
OB – Bill of Lading Number - this is the number of the ocean bill of loading - it is a non-duplicating number assigned by the carrier or agent to uniquely identify a cargo declaration
AAO- Vessel Carrier Code + MA issued by the vessel carrier. This will be used to identify the Conveyance Reference Number for this particular voyage. This will be the vessel carrier code plus the vessel carrier’s conveyance report number.
ZZ- Mutually Defined (use Y to indicate Supplementary Data Required or N to indicate No Supplementary Data Required)
CI – Unique Consignment Reference Number V0 – Version. Data in this element is returned in the REF02 of the corresponding Application Advice (824) message.
V1 Vessel Identification To provide vessel details and voyageNumber
M 1/1
02 (182) Vessel Name Name of ship as documented in "Lloyd’s Register of Ships"
M AN 2/28
04 (55) Flight/Voyage Number Identifying designator for the particular flight M AN 2/10
Version 4010Import/In-transit/FROB
52
A6A Marine Cargo Report for IMPORT/INTRANSIT/FROB (Bill of Lading) Mapping to ANSI
Segment ID Element Name Notes Attributes Codesor voyage on which the cargo travels
V3 Vessel Schedule To transmit vessel scheduling information M 1/1
01 (318) Current Port of Loading Port at which cargo is currently being loaded M AN 5/5 United Nations Location Code (UNLOCODE) will be used for this element. See Appendix E, Table #8.
03 (316) Port of Arrival This will be the Canadian Port of Discharge for this specific cargo for import and in-transit. It will be the first Canadian Port of Arrival of the vessel for FROB.
M AN 5/5 United Nations Location Code (UNLOCODE) will be used for this element. See Appendix E, Table #8.
DTM Date/Time Reference To provide vessel arrival date and time information.
O 0/1
01 Date/Time Reference (374) O ID 3/3 139 – Estimated Date and Time of Loading MANDATORY – when Supplementary Data Required Indicator is set to YES.
02 Date (373) Date of the loading of the cargo on the vessel. O DT 8/8 Estimated date of loading.CCYYMMDD
03 Time (337) Time of the loading of the cargo on the vessel.
O TM 4/8 Estimated time of loading.HHMM
Loop ID – N1
To identify a party by type of organization, name, and code
This loop will be used a minimum of 2 times to identify the following parties:
1. Shipper (name and address of party which, by contract with a carrier, consigns or sends goods with the carrier, or has them conveyed by him.) 2. Consignee3. Notify Party4. Delivery Address - address of physical location at which the goods
M 2/10
M
MOO
Version 4010Import/In-transit/FROB
53
A6A Marine Cargo Report for IMPORT/INTRANSIT/FROB (Bill of Lading) Mapping to ANSI
Segment ID Element Name Notes Attributes Codesare consigned to be delivered. Provide if KNOWN and if different from consignee’s address.
NOTE: There can be only 1 shipper, 1 consignee, 1 Delivery Address AND multiple Notify Parties for a total of up to ten.
If the Supplementary Data Required Indicator in the B2A = N, then the ultimate consignee information must be provided.
Loops identifying any other parties will not be used by Canada Customs.
N1 Name To identify a party by type of organization, name, and code
M 1/1
01 (98) Entity Identifier Code Code identifying an organizational entity, a physical location, property or an individual
M ID 2/3 SH - ShipperCN - Consignee
NP - Notify PartyAE - Delivery Address
02 (93) Name Free-form name M AN 1/35N2 Additional Name Information To specify additional contact names O 0/1
01 (93) Name Free-form contact name 1 O AN 1/35 Must provide a contact name when providing ‘AE’ Delivery Address.
02 (93) Name Free-form contact name 2 O AN 1/35N3 Address Information To specify the location of the named party M 1/2
01 (166) Address Information M AN 1/3502 (166) Address Information Place telephone number in the N302 of the
first occurrence of the N3 segment.O AN 1/35
N4 Geographic Location To specify the geographic place of the named M 1/1
Version 4010Import/In-transit/FROB
54
A6A Marine Cargo Report for IMPORT/INTRANSIT/FROB (Bill of Lading) Mapping to ANSI
Segment ID Element Name Notes Attributes Codesparty
01 (19) City Name Free-form text for city name M AN 2/3002 (156) State or Province Code Code (Standard State/Province) as defined by
appropriate government agency
When N404 is US or CA, N402 is MANDATORY
O ID 2/2 Province/State Codes – see Appendix E, Table #9.
03 (116) Postal Code Code defining international postal zone code excluding punctuation and blanks (zip code for United States)
O ID 3/9
04 (26) Country Code Code identifying the country M ID 2/3 Codes for Representation of Names of Countries, ISO 3166 – see Appendix E, Table #2.
END OF N1 LOOPR4 Port or Terminal Contractual or operational port or point
relevant to the movement of the cargoThis segment will be used a minimum of 4 times for import and in-transit and a minimum of 2 times for FROB to identify the following points:
1. Place of Receipt (R)2. Customs Office of Manifest Origin (3) - MANDATORY when reporting import and/or in-transit cargo.3. Customs Office of Manifest Destination (4) - MANDATORY when reporting import and/or in-transit cargo.4. Place of Delivery (E) 5. Sub-location Code for Office of Manifest Origin (T)6. Sub-location Code for Office of Manifest Destination (M)
M 4/10
MM
M
MO
O
Note: When FROB is reported the R4 ‘3’ (Customs Office of Manifest Origin) and ‘4’ (Customs Office of Manifest Destination) should NOT be reported.
Version 4010Import/In-transit/FROB
55
A6A Marine Cargo Report for IMPORT/INTRANSIT/FROB (Bill of Lading) Mapping to ANSI
Segment ID Element Name Notes Attributes CodesSegments identifying any other points will not be used by Canada Customs
01 (115) Port or Terminal Function Code
Code defining function performed at the port or terminal with respect to a shipment
M ID 1/1 R - Place of Receipt (Contractual)3 - Customs Office of Manifest Origin4 - Customs Office of Manifest DestinationE - Place of Delivery (Contractual)T - Sub-location Code for Office of Manifest Origin M - Sub-location Code for Office of Manifest Destination
02 (309) Location Qualifier Code identifying type of location X ID 1/2 CD - Canadian Customs Office CodeCI - CitySC - City/State and Points Within
03 (310) Location Identifier Code which identifies a specific location or free-form description
When R401 is ‘R’, R403 is MANDATORY (free-form description)When R401 is ‘3’, R403 is MANDATORY when reporting Import and In-transit cargo (use Canada Customs Office Codes)When R401 is ‘4’, R403 is MANDATORY when reporting Import and In-transit cargo (use Canada Customs Office Codes)When R401 is ‘E’, R403 is MANDATORY (free-form description)When R401 is ‘T’ or ‘M’, R403 (sub-location code) must be associated with the port being
X AN 1/25 Canada Customs Office Codes – see Appendix E, Table #1
Sub-location Codes – see Appendix E, Table #4
Version 4010Import/In-transit/FROB
56
A6A Marine Cargo Report for IMPORT/INTRANSIT/FROB (Bill of Lading) Mapping to ANSI
Segment ID Element Name Notes Attributes Codesreported on R401 ‘3’ and/or ‘4’
04 (114) Port Name Free-form name for the place at which an offshore carrier originates or terminates its actual ocean carriage of property.
When R401 is ‘R’ and/or ‘E’, R404 is MANDATORY
O AN 2/24
05 (26) Country Code Code identifying the country
When R401 is ‘R’ and/or ‘E’, R405 is MANDATORY
O ID 2/3
06 (174) Terminal Name Free-form field for terminal name
When R401 is ‘3’, R406 is MANDATORY
O AN 2/30
07 (113) Pier Number Identifying number for the pierWhen R401 is ‘3’, R407 is OPTIONAL
O AN 1/4
SYNTAX NOTES02 P0203 - If either R402 or R403 is present, then the other is required.Loop ID –LX M 1/999LX Assigned Number To reference a line number in a transaction set M 1/1
01 (554) Assigned Number Number assigned for differentiation within a transaction set
M N0 1/6
Y2 Container Details To specify container information and transportation service to be used.
MANDATORY if containerized.
O 0/1 CCRA will only accept one Y2 per LX.
03 (56) Type of Service Type of service being provided. M ID 2/2 AI - Transport Mode ChangeBB - BreakbulkCS - Container StationCY - Container YardDD - Door to DoorDR - Door to RampHA - HaulageHH - House to houseHL - Headload or Devanning
Version 4010Import/In-transit/FROB
57
A6A Marine Cargo Report for IMPORT/INTRANSIT/FROB (Bill of Lading) Mapping to ANSI
Segment ID Element Name Notes Attributes CodesHP - House to PierMC - Multi-country ConsolidationMD - Mixed DeliveryNC - Non-containerized cargoPH - Pier to housePP - Pier to PierRD - Ramp to DoorRE - Ramp to RampRR - Roll-on Roll-off
04 (24) Equipment Type Code This will be coded as per ISO table utilizing both Equipment Size and Type Codes.
M ID 4/4 Equipment Size Codes - see Appendix E, Table #5 Equipment Type Codes - see Appendix E, Table #6
ED Equipment Description To identify further the referenced equipment
MANDATORY if containerized.
O 0/1 CCRA will only accept one ED per LX.
01 (206) Equipment Initial Prefix or alphabetic part of an equipment unit’s identifying number.
M AN 1/4
02 (207) Equipment Number Sequencing or serial part of an equipment unit’s identifying number (pure numeric form for equipment number is preferred)
M AN 1/10
03 (322) Load/Empty Status Code Code which specifies the loaded condition of transportation equipment
M ID 1/1 L – LoadedE – Empty
For Empty, system will accept zero in the quantity on the L0.For Loaded, system will not accept zero in quantity in L0.
M7 Seal Numbers To record seal numbers used and the organization that applied the seals
O 0/5
01 (225) Seal Number Unique number on seal used to close a M AN 2/15
Version 4010Import/In-transit/FROB
58
A6A Marine Cargo Report for IMPORT/INTRANSIT/FROB (Bill of Lading) Mapping to ANSI
Segment ID Element Name Notes Attributes Codesshipment
02 (225) Seal Number O AN 2/1503 (225) Seal Number O AN 2/1504 (225) Seal Number O AN 2/15
LOOP ID – LX\L0 M 1/120
L0 Line Item - Quantity and Weight
To specify quantity, weight, volume, and type of service for a line item including applicable "quantity/rate-as" data
M 1/1
01 (213) Loading Line Item Number
Sequential line number for a loading itemThis number must be unique within the transaction set.
M N0 1/3
04 (81) Weight Numeric value of weight M R 1/10 05 (187) Weight Qualifier Code defining the type of weight M ID 1/2 G – Gross Weight06 (183) Volume Value of volumetric measure X R 1/807 (184) Volume Unit Qualifier Code identifying the volume unit X ID 1/1 B - Barge
C - Cubic CentimetresD - CordE - Cubic FeetF - 100 Board FeetG – Gallons UKH - Hundreds of Measurement TT - TonsI – Gallons US DryJ – Gallons US LiquidK – Hundreds of Measurement TT – Tons ShortL - LoadM - Cubic DecimetresN - Cubic InchesP – Measurement Ton – ShortQ – Measurement Ton –
Version 4010Import/In-transit/FROB
59
A6A Marine Cargo Report for IMPORT/INTRANSIT/FROB (Bill of Lading) Mapping to ANSI
Segment ID Element Name Notes Attributes Codes MetricR - CarS - Measurement Ton – LongT - ContainerU - Volumetric UnitV - LitreX - Cubic Meters
08 (80) Loading Quantity Number of units (pieces) of the loading commodity
M N0 1/7
09 (211) Packaging Form Code/ Quantity Unit of Measure Code
Code for packaging form of the loading quantity
M ID 3/3 See Appendix E, Table #3 for codes.
11 (188) Weight Unit Code Code specifying the weight unit M ID 1/1 E - Metric TonK - KilogramsL - Pounds
SYNTAX NOTES06 P0607 - If either L006 or L007 is present, then the other is required.L5 Description, Marks and
NumbersTo specify the line item in terms of description, quantity, packaging, and marks and numbers
M 1/999
01 (213) Loading Line Item Number
Sequential line number for a loading item O N0 1/3
02 (79) Loading Description Description of an item must be clear and concise. The commodity description should be in plain language and detailed enough to allow the Customs to identify the size, shape and characteristics of the commodity.
M AN 1/50
03 (22) Commodity Code Code describing a commodity or group of commodities
X AN 2/10 Optional
04 (23) Commodity Code Qualifier
Code identifying the commodity coding system used for Commodity Code
X ID 1/1 H - Brussels Nomenclature
06 (87) Marks and Numbers Marks and numbers used to identify a shipment or parts of a shipment
O AN 1/48 If client is reporting UN Code for Dangerous goods, use this element in conjunction with L5-07. See Appendix E,
Version 4010Import/In-transit/FROB
60
A6A Marine Cargo Report for IMPORT/INTRANSIT/FROB (Bill of Lading) Mapping to ANSI
Segment ID Element Name Notes Attributes CodesTable #7 for UN DANGEROUS GOODS Codes.
07 (88) Marks and Numbers Qualifier
Use this field to indicate ZZ if reporting DANGEROUS GOODS.
O ID 2/2 ZZ – Dangerous Goods
SYNTAX NOTESP0304 - If either L503 or L504 is present, then the other is required.
END OF LX LOOPK1 Remarks To transmit information in a free-form format
for comment or special instructionO 0/2
01 (61) Free-Form Message Free-form information M AN 1/3002 (61) Free-Form Message Free-form information O AN 1/30
SE Transaction Set Trailer To indicate the end of the transaction set and provide the count of the transmitted segments (including the beginning (ST) and ending (SE) segments)
M 1/1
01 (96) Number of Included Segments
Total number of segments included in a transaction set including ST and SE segments
M N0 1/10
02 (329) Transaction Set Control Number
Identifying control number that must be unique within the transaction set functional group assigned by the originator for a transaction set
M AN 4/9
Version 4010Import/In-transit/FROB
61
SEGMENT PURPOSE DIAGRAM CARGOPurpose: Ocean carriers use this transaction set to communicate cargo information to Canadian Customs for imports.
ST TRANSACTION SETS
Purpose: To indicate the start of a transaction set and to assign a control number.
ST
ST01 143
Transaction Set ID CD
M ID 03/03
*
ST02 329
Trans. Set Control Number M AN 04/09
NL
B2A SET PURPOSE
Purpose: To allow for positive identification of transaction set purpose.
B2A
B2A01 353
Transaction Set Purpose Code
M ID 02/02
*
B2A02 346
Application Type
M ID 02/02
NL
N9 REFERENCE IDENTIFICATION
Purpose: To transmit identifying information as specified by the reference identification qualifier. This segment will be repeated a minimum of 5 times.
N9
N901 128
ReferenceIdentificationQualifier
M ID 02/03
*
N902 127
ReferenceIdentification R0203
M AN 01/35
NL
Version 4010Import/In-transit/FROB
62
V1 VESSEL INFORMATIONPurpose: To provide vessel details and voyage number.
V1 *
V102 182
VesselNameR0102
M AN 02/28
* *
V104 55
Flt/Voyage Number
M AN 02/10
NL
V3 VESSEL SCHEDULE
Purpose: To transmit vessel scheduling information.
V3
V301 318
CurrentPort ofLoading
M AN 05/05
* * *
V303 316
Port of Arrival
M AN 05/05
NL
DTM DATE/TIME REFERENCE
Purpose: To specify pertinent dates and times. Vessel Registration Date is Mandatory
DTM
DTM01 374
Date/TimeQualifier
O ID 03/03
*
DTM02 373
DateR0203
O DT 08/08
*
DTM03 337
TimeR0203
O TM 04/08
NL
N1 NAME
Purpose: To identify a party by type of organization, name and code. This loop will be used a minimum of 2 times.
N1
N101 98
Entity IDCode
M ID 02/03
*
N102 93
NameR0203
M AN 01/35
NL
Version 4010Import/In-transit/FROB
63
N2 ADDITIONAL NAME INFORMATION
Purpose: To specify additional names or those longer than 35 characters in length.
N2
N201 93
Name
O AN 01/35
*
N202 93
Name
O AN 01/35
NL
N3 ADDRESS INFORMATION
Purpose: To specify the location of the named party.
N3
N301 166
Address
M AN 01/35
*
N302 166
Address
O AN 01/35
NL
N4 GEOGRAPHIC LOCATION
Purpose: To specify the geographic place of the named party.
N4
N401 19
CityNameR0105
M AN 02/30
*
N402 156
State/Prov.CodeC0102
O ID 02/02
*
N403 116
Postal or ZIPCode
O ID 03/09
*
N404 26
Country Code
M ID 02/03
NL
Version 4010Import/In-transit/FROB
64
R4 PORT OR TERMINAL
Purpose: Contractual or operational port or point relevant to the movement of the cargo. This segment will be used a minimum of 4 times for import and in-transit, and a minimum of 2 times for FROB.
R4
R401 115
PortFunctionCode
M ID 01/01
*
R402 309
Location Qualifier
X ID 01/02
*
R403 310
Location Identifier
X AN 1/25
*
R404 114
Port Name
O AN 02/24
*
R405 26
Country Code
O ID 02/03
*
R406 174
Terminal Name
O AN 02/30
*
R407 113
PierNumber
O AN 01/04
NL
LX ASSIGNED NUMBER
Purpose: To reference a line number in a transaction set.
LX
LX01 554
Assigned Number
M NO 01/06
NL
Y2 CONTAINER DETAILS
Purpose: To specify container information and transportation service to be used.
Y2 * *
Y203 56
Type of Service
M ID 02/02
Y204 24
Equipment Type
M ID 04/04
NL
Version 4010Import/In-transit/FROB
65
ED EQUIPMENT DESCRIPTION
Purpose: To adequately identify the equipment being referred to.
ED
ED01 206
EquipmentInitial
M AN 01/04
*
ED02 207
EquipmentNumber
M AN 01/10
*
ED03 322
Load/EmptyStatus
M ID 01/01
NL
M7 SEAL NUMBERS
Purpose: To record seal numbers used.
M7
M701 225
SealNumber
M AN 02/15
*
M702 225
SealNumber
O AN 02/15
*
M703 225
SealNumber
O AN 02/15
*
M704 225
SealNumber
O AN 02/15
NL
Version 4010Import/In-transit/FROB
66
L0 LINE ITEM - QUANTITY AND WEIGHT
Purpose: To specify quantity, weight and volume for a line item including applicable 'quantity/rated-AS' data.
L0
L001 213
Lading LineNumber
M NO 01/03
* * *
L004 81
Weight
M R 01/10
*
L005 187
WeightQualifierP040511
M ID 01/02
*
L006 183
VolumeP0607
X R 01/08
*
L007 184
Volume UnitQualifierP0607
X ID 01/01
*
L008 80
LadingQuantityP0809
M NO 01/07
*
L009 211
Packaging Form CodeP0809
M ID 03/03
* *
L011 188
Weight UnitQualifierP040511
M ID 01/01
*NL
L5 DESCRIPTION, MARKS AND NUMBERS
Purpose: To specify the line item in terms of description, quantity, packaging and marks and numbers and or Dangerous Goods.
L5
L501 213
Lading Line No.
O NO 01/03
*
L502 79
LadingDescription
M AN 01/50
*
L503 22
CommodityCode P0304
X ID 02/10
*
L504 23
Commodity Code Qual.P0304
X ID 01/01
* *
L506 87
Marks &Numbers
O AN 01/48
*
L507 88
Marks and Numbers Qualifier
O ID 02/02
*NL
Version 4010Import/In-transit/FROB
67
K1 REMARKS
Purpose: To transmit information in a free-form format, if necessary, for comment or special instruction.
K1
K101 61
Free Form Message
M AN 01/30
*
K102 61
Free Form Message
O AN 01/30
NL
SE TRANSACTION SET TRAILER
Purpose: To indicate the end of the transaction set and provide the count of the transmitted segments including the beginning ST and ending SE segments.
SE
SE01 96
Number of Included Segments
M NO 01/10
*
SE02 329
Transaction Set Control No.
M AN 04/09
NL
Version 4010Import/In-transit/FROB
68
A6A Cargo - Looping Diagram
Version 4010Import/In-transit/FROB
Seg.ID Name M/O Max. Use Loop ReferenceST Transaction Set Header M 1B2A Set Purpose M 1N9 Reference Number M 99V1 Vessel Identification M 1V3 Vessel Schedule M 1DTM Date/Time Reference M 1N1 Name M 1 N2 / 10N2 Additional Name O 1N3 Address Information M 2N4 Geographic Location M 1R4 Port M 10LX Assigned Number M 1 LX / 999Y2 Container Details O 1ED Equipment Description O 1M7 Seal Numbers O 5L0 Line Item - Quantity and Weight M 1 L0 / 120L5 Description - Marks and Numbers M 999K1 Remarks O 2SE Transaction Set Trailer M 1
69
SAMPLEA6A IMPORT
(Supplementary Data Required)
A shipment is picked up in Montivilliers, France to be shipped out of Le Havre, France, to Montréal, Canada. The goods are consigned to a Freight Forwarder in Toronto and will be delivered to Mississauga, ON.
ISA*00* *00* *ZZ*ABCD *ZZ*RCCECECPP *030922*1915*U*00401*000000388*0*P*^GS*SO*9999*A6A*20030922*1915*123*X*004010ST*311*123002B2A*00*24N9*BI*9999N9*MA*CEACICONV1N9*OB*CARGO1N9*AAO*9888CEACICONV1N9*ZZ*YV1**VESSELNAME**21WV3*FRLEH**CAMTRDTM*139*20030909*1915N1*SH*ABC TRANSPORTN3*123 RUE BELLE*0110-555-1212N4*LE HAVRE***FRN1*CN*XXX FREIGHT FORWARDERN3*123 YONGE STREETN4*TORONTO*ON*K3B 1A1*CAR4*R*CI*MONTIVILLIERS*LE HAVRE*FRR4*3*CD*0395***TERMINAL NAME*32R4*4*CD*0495R4*E*CI*MISSISSAUGA ON*TORONTO ON*CAR4*T*CD*4888R4*M*CD*4999LX*1Y2***CY*40SNED*ABCD*7142030*LM7*AEUB12345L0*1***17550*G*1150*E*20*SKD**KL5*1*SPORTING GOODSL0*2***1950*G*130*E*40*CTN**KL5*1*DEHYDRATED LENTIL MIX****ABCDEFGHIJKLMNOP 456789012345678998765432234567890L5*1*****XYZ123456789AA1L5*2*DEHYDRATED CABBAGE SOUP MIX****AABBCCDDEEFFGGHH 1234890123456789987654321L5*2*****XYZ123456789AA1L5*3*DEHYDRATED VEGATABLE SOUP MIX****PPYYTTHHUUNNFFJJCC6789012345678998765432L5*3*****XYZ123456789AA1LX*2Y2***CY*40SNED*EFGH*4753006*LM7*GYUN23489L0*1***8350*G*1080*E*500*BOX**KL5*1*CAMPING EQUIPMENTLX*3
Version 4010Import/In-transit/FROB
70
Y2***CY*40SNED*IJKL*4062400*LM7*REIT89456L0*1***24000*G*1280*E*2400*PCS**KL5*1*CARTRIDGES SMALL ARMS BLANK***UN0327*ZZK1*01*DO NOT FREEZE SOUP MIXESSE*49*123002GE*1*123IEA*1*000000388
Version 4010Import/In-transit/FROB
71
SAMPLEA6A INTRANSIT
(No Supplementary Data Required)
A shipment is picked up in Montivilliers, France to be shipped out of Le Havre, France to Montréal Canada and then to Brooklyn, New York, US via truck. The goods are consigned to a company in Manhattan, NY but will be delivered to a location in Elizabeth, NJ. In this sample A6A message the carrier has include supplementary data as required and therefore, in this example, the Supplementary Data Required Indicator is "N" and the submission of a Supplementary Cargo Report is not required. Where the carrier does not provide the supplementary data in the A6A map, a Supplementary Cargo Report will be required to be presented by the carrier or freight forwarder for A6A Imports, A6A In-transits, and A6A FROBs.
ISA*00* *00* *ZZ*ABCD *ZZ*RCCECECPP *030922*1915*U*00401*000000388*0*P*^GS*SO*9999*A6A*20030922*1915*123*X*004010ST*311*123004B2A*00*23N9*BI*9999N9*MA*CEACICONV1N9*OB*CARGO2N9*AAO*9888CEACICONV1N9*ZZ*NV1**VESSELNAME**21WV3*FRLEH**CAMTRN1*SH*ABC TRANSPORTN3*123 RUE BELLE*0110-555-1212N4*LE HAVRE***FRN1*CN*EAST SIDE BOUTIQUEN3*123 MAIN STREETN4*MANHATTAN*NY**USN1*AE*EAST SIDE BOUTIQUEN2*MARY BROWNN3*895 DAWSON STREETN4*ELIZBETH*NJ**USR4*R*CI*MONTIVILLIERS*LE HAVRE*FRR4*3*CD*0395***TERMINAL NAME*32R4*4*CD*0395R4*E*CI*ELIZABETH NJ*NEWARK NJ*USLX*1Y2***CY*40SNED*ABCD*1234567*LL0*1***19500*G*1280*E*25*SKD**KL5*1*FRENCH DARK CHOCOLATE OF 70 PER CENT COCAOSE*29*123004GE*1*123IEA*1*000000388
Version 4010Import/In-transit/FROB
72
SAMPLEA6A FREIGHT REMAINING ON BOARD (FROB)
(No Supplementary Data Required)
A shipment is picked up in Montivilliers, France to be shipped out of Le Havre, France. The vessel will stop in Montréal, Canada to discharge freight but this freight will remain on board the vessel (FROB) until its discharge at a terminal in Brooklyn, NY. The goods are consigned to a company in Queens, NY. . In this sample A6A message the carrier has include supplementary data as required and therefore, in this example, the Supplementary Data Required Indicator is "N" and the submission of a Supplementary Cargo Report is not required. Where the carrier does not provide the supplementary data in the A6A map, a Supplementary Cargo Report will be required to be presented by the carrier or freight forwarder for A6A Imports, A6A In-transits, and A6A FROBs.
ISA*00* *00* *ZZ*ABCD *ZZ*RCCECECPP *030922*1915*U*00401*000000388*0*P*^GS*SO*9999*A6A*20030922*1915*123*X*004010ST*311*123003B2A*00*26N9*BI*9999N9*MA*CEACICONV1N9*OB*CARGO3N9*AAO*9888CEACICONV1N9*ZZ*NV1*VESSELNAME**21WV3*FRLEH**CAMTRN1*SH*ABC TRANSPORTN3*123 RUE BELLE*0110-555-1212N4*LE HAVRE***FRN1*CN*QUEENS IMPORTSN3*123 QUEEN STREETN4*QUEENS*NY**USR4*R*CI*MONTIVILLIERS*LE HAVRE*FRR4*E*CI*QUEENS NY*BROOKLYN NY*USLX*1Y2***CY*40SNED*ABCD*1234567*LL0*1***19500*G*1280*E*25*SKD**KL5*1*FRENCH DARK CHOCOLATE OF 70 PER CENT COCAOSE*23*123003GE*1*123IEA*1*000000388
Version 4010Import/In-transit/FROB
73
Supplementary Cargo Data Reporting
Supplementary cargo data is required to be transmitted electronically to Customs to provide more detailed information that is not available on the primary cargo report transmitted; ultimate consignee name and address information, shipper name and address information, commodity descriptions that are in plain language, accurate, and detailed enough to allow Customs to identify the size, shape and characteristics of the product.
This data is used to supplement primary cargo data reported by the carrier and does not constitute full secondary document reporting.
Where a freight forwarder is contracted to transport or dispatch goods, and delivers or arranges the delivery of those goods to a marine carrier for loading on board a ship at a foreign port, that freight forwarder, when possessing a Customs assigned carrier code, may provide the supplementary cargo data for those goods, directly to Customs, when the freight forwarder does not wish to divulge the information to the carrier or its agent. As with the primary cargo data, this supplementary cargo data must be transmitted electronically to Customs at least 24 hours prior to loading in the foreign port.
Freight forwarders requiring a carrier code solely for electronic transmission purposes may obtain further information by calling Carrier and Cargo Policy at (613) 954-7081.
Freight forwarders who choose not to transmit directly to Customs will be required to provide supplementary cargo data directly to the marine carrier or to a service provider to transmit on their behalf. The primary carrier or a service provider may transmit the supplementary cargo data on behalf of the freight forwarder. A service provider transmitting a supplementary cargo report must use the freight forwarder’s 8000 series code. The primary carrier may use their 9000 series carrier code for transmitting supplementary cargo reports.
Supplementary cargo data can be transmitted before or after the A6A primary cargo data.
Corrections to supplementary cargo data should be made as soon as they are known. Electronic corrections by clients will be allowed up to the point of final release status of the goods or by a manual acquittal, e.g., E29B, etc. Corrections required after release should be presented on paper to the local Customs office.
Changes made to cargo data elements before the departure of the vessel from the port of loading of the cargo will restart the 24-hour rule clock; that is to say the cargo cannot be loaded on the vessel for at least 24 hours from the time an acknowledgement for the change transmission is received by the client from the Customs system. If the change was submitted in response to a Hold - Request For More Information notice, loading can proceed once a Remove Hold notice is received.
Version 4010 74Supplementary
A6A MARINE SUPPLEMENTARY CARGO MAP FOR IMPORT, INTRANSIT AND FROB
Interchange and Functional Group Headers and Trailer to ANSI 311 Canadian Customs Information
Segment ID
Element Reference ID/Name Notes Attributes Codes
ISA Interchange Control Header To start and identify an interchange of zero or more functional groups and interchange-related control segments
M 1/1
01(I01) Authorization Information Qualifier Code to identify the type of information in the Authorization Information
M ID 2/2 00 - No Authorization Information Present (No Meaningful Information in I02)
02 (I02) Authorization Information
Information used for additional identification or authorization of the interchange sender or the data in the interchange; the type of information is set by the Authorization Information Qualifier (I01)
M AN 10/10
03 (I03) Security Information Qualifier
Code to identify the type of information in the Security Information
M ID 2/2 00 No Security Information Present (No Meaningful Information in I04)
04 (I04) Security Information This is used for identifying the security information about the interchange sender or the data in the interchange; the type of information is set by the Security Information Qualifier (I03)
M AN 10/10
05 (I05) Interchange ID Qualifier
Qualifier to designate the system/method of code structure used to designate the sender or receiver ID element being qualified
M ID 2/2
06 (I06) Interchange Sender ID Identification code published by the sender for other parties to use as the receiver ID to route data to them; the sender always codes this value in the sender ID element
M AN 15/15
07 (I05) Interchange ID Qualifier
Qualifier to designate the system/method of code structure used to designate the sender or
M ID 2/2 ZZ Mutually Defined
Version 4010 76Supplementary
Interchange and Functional Group Headers and Trailer to ANSI 311 Canadian Customs Information
Segment ID
Element Reference ID/Name Notes Attributes Codes
receiver ID element being qualified08 (I07) Interchange Receiver
IDIdentification code published by the receiver of the data; When sending, it is used by the sender as their sending ID, thus other parties sending to them will use this as a receiving ID to route data to them
M AN 15/15
09 (I08) Interchange Date Date of the interchange M DT 6/6 Still six digits10 (I09) Interchange Time Time of the interchange M TM 4/411 (I10) Interchange Control
Standards Identifier Code to identify the agency responsible for the control standard used by the message that is enclosed by the interchange header and trailer
M ID 1/1 U - U.S. EDI Community of ASC X12, TDCC, and UCS
12 (I11) Interchange Control Version Number
This version number covers the interchange control segments
M ID 5/5 00401
13 (I12) Interchange Control Number
A control number assigned by the interchange Sender
M NO 9/9
14 (I13) Acknowledgment Requested
Code sent by the sender to request an interchange acknowledgment (TA1)
M ID 1/1 0 – No Acknowledgment RequestedCanada Customs does not currently provide this functionality
15 (I14) Usage Indicator Code to indicate whether data enclosed by this interchange envelope is test, production or information
M ID 1/1 T – TestP – Production
16 (I15) Component Element Separator
Type is not applicable; the component element separator is a delimiter and not a data element; this field provides the delimiter used to separate component data elements within a composite data structure; this value must be different than the data element separator and the segment terminator
M 1/1
GS Functional Group Header To indicate the beginning of a functional M 1/1
Version 4010 77Supplementary
Interchange and Functional Group Headers and Trailer to ANSI 311 Canadian Customs Information
Segment ID
Element Reference ID/Name Notes Attributes Codes
group and to provide control information01 (479) Functional Identifier
CodeCode identifying a group of application related transaction sets
M ID 2/2 SO – Ocean Shipment Information
02 (142) Application Sender’s Code
Code identifying party sending transmission; codes agreed to by trading partners
M AN 2/15 Canada Customs Carrier Code
03 (124) Application Receiver’s Code
Code identifying party receiving transmission. Codes agreed to by trading partners
M AN 2/15 S10 – Supplementary Data
04 (373) Date Date expressed as CCYYMMDD M DT 8/805 (337) Time Time expressed in 24-hour clock time as
follows: HHMM, or HHMMSS, or HHMMSSD, or HHMMSSDD, where H = hours (00-23), M = minutes (00-59), S = integer seconds (00- 59) and DD = decimal seconds; decimal seconds are expressed as follows: D = tenths (0-9) and DD = hundredths (00-99)
M TM 4/8
06 (28) Group Control Number Assigned number originated and maintained by the sender
M NO 1/9
07 (455) Responsible Agency Code
Code used in conjunction with Data Element 480 to identify the issuer of the standard
M ID 1/2 X – Accredited Standards Committee X12
08 (480) Version / Release / Industry Identifier Code
Code indicating the version, release, subrelease, and industry identifier of the EDI standard being used, including the GS and GE segments; if code in DE455 in GS segment is X, then in DE 480 positions 1-3 are the version number; positions 4-6 are the release and subrelease, level of the version; and positions 7-12 are the industry or trade association identifiers (optionally assigned by user); if code in DE455 in GS segment is T, then other formats are allowed
M AN 1/12 004010
Version 4010 78Supplementary
Interchange and Functional Group Headers and Trailer to ANSI 311 Canadian Customs Information
Segment ID
Element Reference ID/Name Notes Attributes Codes
GE Functional Group Trailer To indicate the end of a functional group and to provide control information
M 1/1
01 (97) Number of Transaction Sets Included
Total number of transaction sets included in the functional group or interchange (transmission) group terminated by the trailer containing this data element
M NO 1/6
02 (28) Group Control Number Assigned number originated and maintained by the sender
M NO 1/9
IEA To define the end of an interchange of zero or more functional groups and interchange-related control segments
M 1/1
01 (I16) Number of Included Functional Groups M NO 1/502 (I12) Interchange Control Number M NO 1/9
Version 4010 79Supplementary
A6A Marine SUPPLEMENTARY Cargo Report Mapping to ANSI 311Segment ID Element Name Notes Attributes Codes
ST Transaction Set Header To indicate the start of a transaction set and to assign a control number
M 1/1
01 (143) Transaction set ID M ID 3/3 31102 (329) Transaction set control
numberM AN 4/9
B2A Set Purpose To allow for positive identification of transaction set purpose
M 1/1
01 (353) Transaction Set Purpose Code
Code identifying purpose of transaction set M ID 2/2 00 – original03 – delete04 – change
02 (346) Application Type Code identifying an application - to indicate that the transmission is an A6A cargo declaration associated with cargo arriving in Canada for domestic consumption (import), cargo in-transit to the U.S. by any mode of transportation (in-transit), or cargo on board a vessel that is not being discharged at a Canadian Port (FROB)
M ID 2/2 24 - Imported Goods23 - In-Transit Goods to US
26 - Freight Remaining on Board
N9 Reference Identification To transmit identifying information as specified by the Reference Identification Qualifier
Canada Customs Cargo Control Number (CCN) will be constructed by concatenating the N902s with the following qualifiers:BI - Carrier Code +MA - Report Number + OB - Bill of Loading6A - Supplementary Reference NumberCI - Unique Consignment Reference Number V0 - Version
M 4/99
MMM
MOO
Version 4010 80Supplementary
A6A Marine SUPPLEMENTARY Cargo Report Mapping to ANSI 311Segment ID Element Name Notes Attributes Codes
Note: There can be only 1 BI, 1 MA, 1 OB, and 1 6A.
Any additional N9 segments will not be use by Canada Customs
01 (128) Reference Identification Qualifier
Code qualifying the Reference Identification M ID 2/3 BI - Bonded Cargo Carrier ID Number MA – Cargo Carrier’s Report Number OB - Ocean Bill of Lading6A - Supplementary Reference Number will be the Carrier Code of the Freight Forwarder or the Marine Cargo Carrier plus the Supplementary Reference Number of the Freight Forwarder or the Marine Cargo Carrier.CI – Unique Consignment Reference Number V0 – Version
02 (127) Reference Identification BI – Carrier Code - unique code assigned to the carrier by Canada Customs. For supplementary reporting, this will be the cargo carrier’s bonded carrier code.
MA – Report Number - a non-duplicating number assigned by carriers that serves to uniquely identify an A6 conveyance - an "E"
M AN 1/35
Version 4010 81Supplementary
A6A Marine SUPPLEMENTARY Cargo Report Mapping to ANSI 311Segment ID Element Name Notes Attributes Codes
in the first position of the number indicates an EDI transmission - a "CE" in the first and second positions of the number indicates an EDI transmission and the cargo is on a voyage with consortiums partners. For supplementary reporting, this will be the cargo carrier’s MA report number.
OB – Bill of Lading Number - this is the number of the ocean bill of lading - it is a non-duplicating number assigned by the carrier or agent to uniquely identify a cargo declaration. For supplementary reporting, Bill of Lading number as referenced on the cargo report.
6A - Supplementary Reference Number will be the Carrier Code of the Freight Forwarder or the Marine Cargo Carrier plus the Supplementary Reference Number of the Freight Forwarder or the Marine Cargo Carrier. (Freight Forwarders transmit the Freight Forwarder carrier code + Freight Forwarder supplementary reference number) (Marine Cargo Carriers transmit the Marine Cargo Carrier Code + Marine Cargo supplementary reference number)
CI -Unique Consignment Reference Number
V0 - Version. Data in this element is returned in the REF02 of the corresponding Application Advice (824) message
Version 4010 82Supplementary
A6A Marine SUPPLEMENTARY Cargo Report Mapping to ANSI 311Segment ID Element Name Notes Attributes Codes
Loop ID – N1
To identify a party by type of organization, name, and code
This loop will be used a minimum of 2 times to identify the following parties:
1. Shipper (name and address of party which, by contract with a carrier, consigns or sends goods with the carrier, or has them conveyed by him.)2. Consignee (Must be the Ultimate Consignee)3. Notify Party4. Delivery Address - address of physical location at which the goods are consigned to be delivered. Provide if KNOWN and if different from consignee’s address.
NOTE: There can be only 1 shipper, 1 consignee, 1 Delivery Address AND multiple Notify Parties for a total of up to ten.
Loops identifying any other parties will not be used by Canada Customs.
M 2/10
M
M
OO
N1 Name To identify a party by type of organization, name, and code
M 1/1
01 (98) Entity Identifier Code Code identifying an organizational entity, a physical location, property or an individual
M ID 2/3 SH - ShipperCN - Consignee NP - Notify PartyAE - Delivery Address
02 (93) Name Free-form name M AN 1/35N2 Additional Name Information To specify additional contact names O 0/1
01 (93) Name Free-form contact name 1 O AN 1/35
Version 4010 83Supplementary
A6A Marine SUPPLEMENTARY Cargo Report Mapping to ANSI 311Segment ID Element Name Notes Attributes Codes
Must provide a contact name when providing ‘AE’ Delivery Address
02 (93) Name Free-form contact name 2 O AN 1/35N3 Address Information To specify the location of the named party M 1/2
01 (166) Address Information M AN 1/3502 (166) Address Information Place telephone number in the N302 of the
first occurrence of the N3 segment.O AN 1/35
N4 Geographic Location To specify the geographic place of the named party
M 1/1
01 (19) City Name Free-form text for city name M AN 2/3002 (156) State or Province Code Code (Standard State/Province) as defined by
appropriate government agency
When N404 is US or CA, N402 is MANDATORY
O ID 2/2 Province/State Codes – see Appendix E, Table #9.
03 (116) Postal Code Code defining international postal zone code excluding punctuation and blanks (zip code for United States)
O ID 3/9
04 (26) Country Code Code identifying the country M ID 2/3 Codes for Representation of Names of Countries, ISO 3166 – see Appendix E, Table #2.
END OF N1 LOOPR4 Port or Terminal Contractual or operational port or point
relevant to the movement of the cargo
1. Place of Delivery (E)
Segments identifying any other points will not be used by Canada Customs for Supplementary Reporting
M 1/10
M
01 (115) Port or Terminal Function Code
Code defining function performed at the port or terminal with respect to a shipment
M ID 1/1 E- Place of Delivery
Version 4010 84Supplementary
A6A Marine SUPPLEMENTARY Cargo Report Mapping to ANSI 311Segment ID Element Name Notes Attributes Codes
02 (309) Location Qualifier Code identifying type of location X ID 1/2 CD - Canadian Customs Office CodeCI - CitySC - City/State and Points Within
03 (310) Location Identifier Free-form text which identifies a specific location when R401 is ‘E’
X AN 1/25
04 (114) Port Name Free-form name for the place at which an offshore carrier terminates its actual ocean carriage of property.
M AN 2/24
05 (26) Country Code Code identifying the country M ID 2/3
SYNTAX NOTES02 P0203 - If either R402 or R403 is present, then the other is required.Loop ID –LX M 1/999LX Assigned Number To reference a line number in a transaction set M 1/1
01 (554) Assigned Number Number assigned for differentiation within a transaction set
M N0 1/6
ED Equipment Description To identify further the referenced equipment
MANDATORY if containerized.
O 0/1 CCRA will only accept one ED per LX.
01 (206) Equipment Initial Prefix or alphabetic part of an equipment unit’s identifying number. For Supplementary data this initial must be associated to the primary CCN.
M AN 1/4
02 (207) Equipment Number Sequencing or serial part of an equipment unit’s identifying number (pure numeric form for equipment number is preferred).For Supplementary data this number must be associated to the primary CCN.
M AN 1/10
03 (322) Load/Empty Status Code
Code which specifies the loaded condition of M ID 1/1 L – LoadedE – Empty
Version 4010 85Supplementary
A6A Marine SUPPLEMENTARY Cargo Report Mapping to ANSI 311Segment ID Element Name Notes Attributes Codes
transportation equipmentFor Empty, system will accept zero in the quantity on the L0.For Loaded, system will not accept zero in quantity in L0.
LOOP ID – LX\L0 M 1/120
L0 Line Item - Quantity and Weight
To specify quantity, weight, volume, and type of service for a line item including applicable "quantity/rate-as" data
M 1/1
01 (213) Loading Line Item Number
Sequential line number for a loading itemThis number must be unique within the transaction set.
M N0 1/3
04 (81) Weight Numeric value of weight M R 1/1005 (187) Weight Qualifier Code defining the type of weight M ID 1/2 G – Gross Weight06 (183) Volume Value of volumetric measure X R 1/8
07 (184) Volume Unit Qualifier Code identifying the volume unit X ID 1/1 B - BargeC - Cubic CentimetresD - CordE - Cubic FeetF - 100 Board FeetG -– Gallons UKH - Hundreds of Measurement TT - TonsI – Gallons US DryJ – Gallons US LiquidK – Hundreds of Measurement TT – Tons ShortL - LoadM - Cubic Decimetres
Version 4010 86Supplementary
A6A Marine SUPPLEMENTARY Cargo Report Mapping to ANSI 311Segment ID Element Name Notes Attributes Codes
N - Cubic InchesP – Measurement Ton – ShortQ – Measurement Ton – MetricR - CarS - Measurement Ton – LongT - ContainerU - Volumetric UnitV - LitreX - Cubic Meters
08 (80) Loading Quantity Number of units (pieces) of the loading commodity
M N0 1/7
09 (211) Packaging Form Code/ Quantity Unit of Measure Code
Code for packaging form of the loading quantity
M ID 3/3 See Appendix E, Table #3 for codes.
11 (188) Weight Unit Code Code specifying the weight unit M ID 1/1 E - Metric TonK - KilogramsL - Pounds
SYNTAX NOTES06 P0607 - If either L006 or L007 is present, then the other is required.L5 Description, Marks and
NumbersTo specify the line item in terms of description, quantity, packaging, and marks and numbers
M 1/999
01 (213) Loading Line Item Number
Sequential line number for a loading item O N0 1/3
02 (79) Loading Description Description of an item must be clear and concise. The commodity description should be in plain language and detailed enough to allow the Customs to identify the size, shape and characteristics of the commodity.
M AN 1/50
03 (22) Commodity Code Code describing a commodity or group of X AN 2/10 Optional
Version 4010 87Supplementary
A6A Marine SUPPLEMENTARY Cargo Report Mapping to ANSI 311Segment ID Element Name Notes Attributes Codes
commodities04 (23) Commodity Code
QualifierCode identifying the commodity coding system used for Commodity Code
X ID 1/1 H - Brussels Nomenclature
06 (87) Marks and Numbers Marks and numbers used to identify a shipment or parts of a shipment
If client is reporting UN-HAZARDOUS number use this field in conjunction with L5-07.
O AN 1/48 If client is reporting UN Code for Dangerous goods, use this element in conjunction with L5-07. See Appendix E, Table #7 for UN DANGEROUS GOODS Codes.
07 (88) Marks and Numbers Qualifier
Use this field to indicate ZZ if reporting DANGEROUS GOODS.
O ID 2/2 ZZ – Dangerous Goods
SYNTAX NOTESP0304 - If either L503 or L504 is present, then the other is
END OF LX LOOPK1 Remarks To transmit information in a free-form format
for comment or special instructionO 0/2
01 (61) Free-Form Message Free-form information M AN 1/3002 (61) Free-Form Message Free-form information O AN 1/30
SE Transaction Set Trailer To indicate the end of the transaction set and provide the count of the transmitted segments (including the beginning (ST) and ending (SE) segments)
M 1/1
01 (96) Number of Included Segments
Total number of segments included in a transaction set including ST and SE segments
M N0 1/10
02 (329) Transaction Set Control Number
Identifying control number that must be unique within the transaction set functional group assigned by the originator for a transaction set
M AN 4/9
Version 4010 88Supplementary
SEGMENT PURPOSE DIAGRAM SUPPLEMENTARY DATA
Purpose: Ocean carriers and Freight Forwarders use this transaction set to communicate Supplementary Data information to Canadian Customs for imports.
ST TRANSACTION SETS
Purpose: To indicate the start of a transaction set and to assign a control number.
ST
ST01 143
Transaction Set ID CD
M ID 03/03
*
ST02 329
Trans. Set Control Number M AN 04/09
NL
B2A SET PURPOSE
Purpose: To allow for positive identification of transaction set purpose.
B2A
B2A01 353
Transaction Set Purpose Code
M ID 02/02
*
B2A02 346
Application Type
M ID 02/02
NL
N9 REFERENCE IDENTIFICATION
Purpose: To transmit identifying information as specified by the reference identification qualifier. This segment will be repeated a minimum of 4 times.
N9
N901 128
Reference Identification Qualifier
M ID 02/03
*
N902 127
ReferenceIdentification R0203
M AN 01/35
NL
Version 4010 89Supplementary
N1 NAME
Purpose: To identify a party by type of organization, name and code. This loop will be used a minimum of 2 times.
N1
N101 98
Entity ID Code
M ID 02/03
*
N102 93
Name R0203
M AN 01/35
NL
N2 ADDITIONAL NAME INFORMATION
Purpose: To specify additional names or those longer than 35 characters in length.
N2
N201 93
Name
O ID 01/35
*
N202 93
Name
O AN 01/35
NL
N3 ADDRESS INFORMATION
Purpose: To specify the location of the named party.
N3
N301 166
Address
M AN 01/35
*
N302 166
Address
O AN 01/35
NL
N4 GEOGRAPHIC LOCATION
Purpose: To specify the geographic place of the named party.
N4
N401 19
City Name R0105
M AN 02/30
*
N402 156
State/Prov. Code C0102
O ID 02/02
*
N403 116
Postal or ZIP Code
O ID 03/09
*
N404 26
Country Code
M ID 02/03
NL
Version 4010 90Supplementary
R4 PORT OR TERMINAL
Purpose: Contractual or operational port or point relevant to the movement of the cargo. This segment will be used a once on the Supplementary Cargo Report.
R4
R401 115
Port Function Code
M ID 01/01
*
R402 309
Location Qualifier
X ID 01/02
*
R403 310
Location Identifier
X AN 1/25
*
R404 114
Port Name
M AN 02/24
*
R405 26
Country Code
M ID 02/03
NL
LX ASSIGNED NUMBER
Purpose: To reference a line number in a transaction set.
LX
LX01 554
Assigned Number
M NO 01/06
NL
ED EQUIPMENT DESCRIPTION
Purpose: To adequately identify the equipment being referred to.
ED
ED01 206
Equipment Initial
M AN 01/04
*
ED02 207
Equipment Number
M AN 01/10
*
ED03 322
Load/Empty Status
M ID 01/01
NL
Version 4010 91Supplementary
L0 LINE ITEM - QUANTITY AND WEIGHT
Purpose: To specify quantity, weight and volume for a line item including applicable 'quantity/rated-AS' data.
L0
L001 213
Lading Line Number
M NO 01/03
* * *
L004 81
Weight
M R 01/10
*
L005 187
WeightQualifier P040511
M ID 01/02
*
L006 183
Volume P0607
X R 01/08
*
L007 184
Volume UnitQualifier P0607
X ID 01/01
*
L008 80
LoadingQuantityP0809
M NO 01/07
*
L009 211
Packaging Form CodeP0809
M ID 03/03
* *
L011 188
Weight Unit Code
M ID 01/01
NL
L5 DESCRIPTION, MARKS AND NUMBERS
Purpose: To specify the line item in terms of description, quantity, packaging and marks and numbers and or Hazardous Goods.
L5
L501 213
Lading Line No.
O N0 01/03
*
L502 79
LadingDescription
M AN 01/50
*
L503 22
Commodity Code P0304
X AN 02/10
*
L504 23
Commodity Code Qual. P0304
X ID 01/01
* *
L506 87
Marks & Numbers
O AN 01/48
*
L507 88
Marks and Numbers Qualifier
O ID 02/02
*NL
Version 4010 92Supplementary
K1 REMARKS
Purpose: To transmit information in a free-form format, if necessary, for comment or special instruction.
K1
K101 61
Free Form Message
M AN 01/30
*
K102 61
Free Form Message
O AN 01/30
NL
SE TRANSACTION SET TRAILER
Purpose: To indicate the end of the transaction set and provide the count of the transmitted segments including the beginning ST and ending SE segments.
SE
SE01 96
Number of Included Segments
M NO 01/10
*
SE02 329
Transaction Set Control No.
M AN 04/09
NL
Version 4010 93Supplementary
A6A Supplementary - Looping Diagram
Version 4010 94Supplementary
Seg.ID Name M/O Max. Use Loop ReferenceST Transaction Set Header M 1B2A Set Purpose M 1N9 Reference Number M 99N1 Name M 1 N2 / 10N2 Additional Name O 1N3 Address Information M 2N4 Geographic Location M 1R4 Port M 10LX Assigned Number M 1 LX / 999ED Equipment Description O 1L0 Line Item - Quantity and Weight M 1 L0 / 120L5 Description - Marks and Numbers M 999K1 Remarks O 2SE Transaction Set Trailer M 1
SAMPLEA6A – SUPPLEMENTARY
(This message is an example of the supplementary data required for the A6A Import sample message)
A shipment is picked up in Montivilliers, France to be shipped out of Le Havre, France to Montreal, Canada and is consigned to a company in Toronto, Canada. This shipment will be delivered to a company in Mississauga, ON, by a Freight Forwarder.
ISA*00* *00* *ZZ*ABCD *ZZ*RCCECECPP *030922*1915*U*00401*000000388*0*P*^GS*SO*8900*S10*20030922*1915*123*X*004010ST*311*123005B2A*00*24N9*BI*9999N9*MA*CEACICONV1N9*OB*CARGO1N9*6A*8900123456789N1*SH*ABC TRANSPORTN3*123 RUE BELLE*0110-555-1212N4*LE HAVRE***FRN1*CN* XXX ULTIMATE CONSIGNEEN3*456 CHARLOTTE AVENUEN4*TORONTO*ON*K2L 1A1*CAN1*NP*DEREK JONES XXX COMPANYN3*123 YONGE STREETN4*TORONTO*ON*K3B 1A1*CAN1*AE* YYY COMPANYN2*SHARON BROWNN3*222 CONROY AVENUEN4*MISSISSAUGA*ON*K5A 1G1*CAR4*E*CI*MISSISSAUGA ON*TORONTO ON*CALX*1ED*ABCD*7142030*LL0*1***19500*G*1280*E*25*SKD**KL5*1*LADIES PROFESSIONAL GOLF SHOES LEATHER***MARKED SHO990L5*2*GOLF BAGS MADE OF NYLON GREEN AND BLUE***MARKED BAG886L5*3* LADIES PROFESSIONAL GOLF CLUBS 10 IRON***MARKED CLU772LX*2ED*EFGH*4753006*LL0*2***8350*G*1080*E*500*BOX**KL5*1*GAS LANTERNS***MARKED LAN445L5*2*FOUR AND SIX PERSON TENTS MADE OF NYLON***MARKED TEN764L5*3*SLEEPING BAGS OF COTTON NYLON POLYESTER***MARKED SLB678 LX*3ED*IJKL*4062400*LL0*3***24000*G*1280*E*2400*PCS**KL5*3*CARTRIDGES SMALL ARMS BLANK***UN0327*ZZSE*37*123005GE*1*123IEA*1*000000388
Version 4010 95Supplementary
Empty Containers in International Shuttle Service Reporting
Marine carriers will report empty containers that are coming from offshore that are considered to be in international shuttle service classified as Customs Tariff items 9801.10.00.00, 9801.00.00.10, and 9814.00.00.10, on one primary cargo report (E10). The E10 will list all empty containers in shuttle service under the responsibility of the marine carrier for a specific conveyance and voyage.
Marine carriers will report empty containers in international shuttle service that are entering Canada or that are freight remaining on board the vessel.
Carriers must transmit this information electronically to Customs within 24 hours of departure of the vessel from its last foreign port of loading (other than the U.S.) on its direct voyage to Canada.
If empty marine containers are laden in the United States prior to the conveyance arriving in Canada, an E10 cargo report should be transmitted upon the vessel’s departure from the U.S. seaport.
Supplementary cargo reports are not required for E10 empty container reports.
Version 4010 96Empty
A6A MARINE EMPTY CARGO MAP FOR IMPORT AND FROB
Interchange and Functional Group Headers and Trailer to ANSI 311 Canadian Customs InformationSegment ID Element Reference ID/Name Notes Attributes CodesISA Interchange Control Header To start and identify an interchange of zero or
more functional groups and interchange-related control segments
M 1/1
01 (I01) Authorization Information Qualifier
Code to identify the type of information in the Authorization Information
M ID 2/2 00 - No Authorization Information Present (No Meaningful Information in I02)
02 (I02) Authorization Information Information used for additional identification or authorization of the interchange sender or the data in the interchange; the type of information is set by the Authorization Information Qualifier (I01)
M AN 10/10
03 (I03) Security Information Qualifier
Code to identify the type of information in the Security Information
M ID 2/2 00 No Security Information Present (No Meaningful Information in I04)
04 (I04) Security Information This is used for identifying the security information about the interchange sender or the data in the interchange; the type of information is set by the Security Information Qualifier (I03)
M AN 10/10
05 (I05) Interchange ID Qualifier Qualifier to designate the system/method of code structure used to designate the sender or receiver ID element being qualified
M ID 2/2
06 (I06) Interchange Sender ID Identification code published by the sender for other parties to use as the receiver ID to route data to them; the sender always codes this value in the sender ID element
M AN 15/15
07 (I05) Interchange ID Qualifier Qualifier to designate the system/method of code structure used to designate the sender or receiver ID element being qualified
M ID 2/2 ZZ Mutually Defined
08 (I07) Interchange Receiver ID Identification code published by the receiver M AN 15/15
Version 4010 98Empty
Interchange and Functional Group Headers and Trailer to ANSI 311 Canadian Customs InformationSegment ID Element Reference ID/Name Notes Attributes Codes
of the data; When sending, it is used by the sender as their sending ID, thus other parties sending to them will use this as a receiving ID to route data to them
09 (I08) Interchange Date Date of the interchange M DT 6/6 Still six digits10 (I09) Interchange Time Time of the interchange M TM 4/411 (I10) Interchange Control
Standards Identifier Code to identify the agency responsible for the control standard used by the message that is enclosed by the interchange header and trailer
M ID 1/1 U - U.S. EDI Community of ASC X12, TDCC, and UCS
12 (I11) Interchange Control Version Number
This version number covers the interchange control segments
M ID 5/5 00401
13 (I12) Interchange Control Number
A control number assigned by the interchange Sender
M NO 9/9
14 (I13) Acknowledgment Requested
Code sent by the sender to request an interchange acknowledgment (TA1)
M ID 1/1 0 – No Acknowledgment RequestedCanada Customs does not currently provide this functionality
15 (I14) Usage Indicator Code to indicate whether data enclosed by this interchange envelope is test, production or information
M ID 1/1 T – TestP – Production
16 (I15) Component Element Separator
Type is not applicable; the component element separator is a delimiter and not a data element; this field provides the delimiter used to separate component data elements within a composite data structure; this value must be different than the data element separator and the segment terminator
M 1/1
GS Functional Group Header To indicate the beginning of a functional group and to provide control information
M 1/1
01 (479) Functional Identifier Code
Code identifying a group of application related transaction sets
M ID 2/2 SO – Ocean Shipment Information
Version 4010 99Empty
Interchange and Functional Group Headers and Trailer to ANSI 311 Canadian Customs InformationSegment ID Element Reference ID/Name Notes Attributes Codes
02 (142) Application Sender’s Code
Code identifying party sending transmission; codes agreed to by trading partners
M AN 2/15 Canada Customs Carrier Code
03 (124) Application Receiver’s Code
Code identifying party receiving transmission. Codes agreed to by trading partners
M AN 2/15 E10 – Empties
04 (373) Date Date expressed as CCYYMMDD M DT 8/805 (337) Time Time expressed in 24-hour clock time as
follows: HHMM, or HHMMSS, or HHMMSSD, or HHMMSSDD, where H = hours (00-23), M = minutes (00-59), S = integer seconds (00- 59) and DD = decimal seconds; decimal seconds are expressed as follows: D = tenths (0-9) and DD = hundredths (00-99)
M TM 4/8
06 (28) Group Control Number Assigned number originated and maintained by the sender
M NO 1/9
07 (455) Responsible Agency Code
Code used in conjunction with Data Element 480 to identify the issuer of the standard
M ID 1/2 X – Accredited Standards Committee X12
08 (480) Version / Release / Industry Identifier Code
Code indicating the version, release, subrelease, and industry identifier of the EDI standard being used, including the GS and GE segments; if code in DE455 in GS segment is X, then in DE 480 positions 1-3 are the version number; positions 4-6 are the release and subrelease, level of the version; and positions 7-12 are the industry or trade association identifiers (optionally assigned by user); if code in DE455 in GS segment is T, then other formats are allowed
M AN 1/12 004010
GE Functional Group Trailer To indicate the end of a functional group and to provide control information
M 1/1
01 (97) Number of Transaction Sets Included
Total number of transaction sets included in the functional group or interchange
M NO 1/6
Version 4010 100Empty
Interchange and Functional Group Headers and Trailer to ANSI 311 Canadian Customs InformationSegment ID Element Reference ID/Name Notes Attributes Codes
(transmission) group terminated by the trailer containing this data element
02 (28) Group Control Number Assigned number originated and maintained by the sender
M NO 1/9
IEA To define the end of an interchange of zero or more functional groups and interchange-related control segments
M 1/1
01 (I16) Number of Included Functional Groups M NO 1/502 (I12) Interchange Control Number M NO 1/9
Version 4010 101Empty
A6A Marine Cargo Report for EMPTY (Bill of Lading) Mapping to ANSI 311
Segment ID Element Name Notes Attributes CodesST Transaction Set Header To indicate the start of a transaction set and to
assign a control numberM 1/1
01 (143) Transaction set ID M ID 3/3 31102 (329) Transaction set control
numberM AN 4/9
B2A Set Purpose To allow for positive identification of transaction set purpose
M 1/1
01 (353) Transaction Set Purpose Code
Code identifying purpose of transaction set M ID 2/2 00 – original03 – delete04 – change
02 (346) Application Type Code identifying an application - to indicate that the transmission is an A6A cargo declaration associated with cargo arriving in Canada for domestic consumption (import) or cargo on board a vessel that is not being discharged at a Canadian Port (FROB)
M ID 2/2 24 – Imported Goods26 – Freight Remaining on Board
N9 Reference Identification To transmit identifying information as specified by the Reference Identification Qualifier
Canada Customs Cargo Control Number (CCN) will be constructed by concatenating the N902s with the following qualifiers:BI - Carrier Code +MA - Report Number (vessel reporting) + OB - Bill of LoadingAAO- Carrier Assigned Code + MA
CI – Unique Consignment Reference Number V0 – Version
Note: There can be only 1 BI, 1 MA, 1 OB, and 1 AAO.
Any additional N9 segments will not be use
M 4/99
MMM
M
O
O
Version 4010 102Empty
A6A Marine Cargo Report for EMPTY (Bill of Lading) Mapping to ANSI 311
Segment ID Element Name Notes Attributes Codesby Canada Customs
01 (128) Reference Identification Qualifier
Code qualifying the Reference Identification M ID 2/3 BI - Bonded Carrier ID NumberMA - Ship Notice/Manifest Number (may or may not be the same as the vessel carrier’s conveyance report number contained in the AAO).OB - Ocean Bill of LadingAAO – Vessel Carrier Assigned Code + MA (Vessel Carrier’s Conveyance Report number) = (for empty reporting, this will be the vessel carrier code plus the vessel carrier’s conveyance report number)CI - Unique Consignment Reference Number V0 - Version
02 (127) Reference Identification BI – Carrier Code - unique code assigned to the cargo carrier by Canada Customs
MA – Report Number - a non-duplicating number assigned by carriers that serves to uniquely identify an A6 conveyance- an "E" in the first position of the number indicates an EDI transmission - a "CE" in the first and
M AN 1/35
Version 4010 103Empty
A6A Marine Cargo Report for EMPTY (Bill of Lading) Mapping to ANSI 311
Segment ID Element Name Notes Attributes Codessecond positions of the number indicates an EDI transmission and the cargo is on a voyage with consortiums partners. This number may or may not be the same as the vessel carrier’s conveyance report contained in the AAO.
OB – Bill of Loading Number - this is the number of the ocean bill of loading - it is a non-duplicating number assigned by the carrier or agent to uniquely identify a cargo declaration
AAO- Vessel Carrier Code + MA issued by the vessel carrier. This will be used to identify the Conveyance Reference Number for this particular voyage.
CI – Unique Consignment Reference Number V0 – Version. Data in this element is returned in the REF02 of the corresponding Application Advice (824) message
V1 Vessel Identification To provide vessel details and voyageNumber
M 1/1
02 (182) Vessel Name Name of ship as documented in "Lloyd’s Register of Ships"
M AN 2/28
04 (55) Flight/Voyage Number Identifying designator for the particular flight or voyage on which the cargo travels
M AN 2/10
V3 Vessel Schedule To transmit vessel scheduling information M 1/1
01 (318) Current Port of Loading Port at which cargo is currently being loaded M AN 5/5 United Nations Location Code (UNLOCODE) will be used for this element. See Appendix E, Table
Version 4010 104Empty
A6A Marine Cargo Report for EMPTY (Bill of Lading) Mapping to ANSI 311
Segment ID Element Name Notes Attributes Codes#8.
03 (316) Port of Arrival This will be the Canadian Port of Discharge for this empty container(s) for import. It will be the first Canadian Port of Arrival of the vessel for FROB.
M AN 5/5 United Nations Location Code (UNLOCODE) will be used for this element. See Appendix E, Table #8.
Loop ID – N1 To identify a party by type of organization, name, and code
This loop will be used a maximum of 10 times to identify the following parties:
1. Shipper (name and address of party which, by contract with a carrier, consigns or sends goods with the carrier, or has them conveyed by him.) 2. Consignee3. Notify Party4. Delivery Address - address of physical location at which the goods are consigned to be delivered. Provide if KNOWN and if different from consignee’s address.
NOTE: There can be 1 shipper, 1 consignee, 1 Delivery Address AND multiple Notify Parties for a total of up to ten.
Loops identifying any other parties will not be used by Canada Customs.
O 0/10
O
OOO
N1 Name To identify a party by type of organization, name, and code
O 0/1
01 (98) Entity Identifier Code Code identifying an organizational entity, a physical location, property or an individual
M ID 2/3 SH – ShipperCN – Consignee NP – Notify PartyAE - Delivery Address
02 (93) Name Free-form name M AN 1/35Version 4010 105Empty
A6A Marine Cargo Report for EMPTY (Bill of Lading) Mapping to ANSI 311
Segment ID Element Name Notes Attributes CodesN2 Additional Name Information To specify additional names O 0/1
01 (93) Name Free-form contact name 1 O AN 1/35 Must provide a contact name when providing ‘AE’ Delivery Address.
02 (93) Name Free-form contact name 1 O AN 1/35N3 Address Information To specify the location of the named party O 0/2
01 (166) Address Information M AN 1/3502 (166) Address Information Place telephone number in the N302 of the
first occurrence of the N3 segment.O AN 1/35
N4 Geographic Location To specify the geographic place of the named party
O 0/1
01 (19) City Name Free-form text for city name M AN 2/3002 (156) State or Province Code Code (Standard State/Province) as defined by
appropriate government agency
When N404 is US or CA, N402 is MANDATORY
O ID 2/2 Province/State Codes – see Appendix E, Table #9.
03 (116) Postal Code Code defining international postal zone code excluding punctuation and blanks (zip code for United States)
O ID 3/9
04 (26) Country Code Code identifying the country M ID 2/3 Codes for Representation of Names of Countries, ISO 3166 – see Appendix E, Table #2.
END OF N1 LOOPR4 Port or Terminal Contractual or operational port or point
relevant to the movement of the cargoThis segment will be used a minimum of 4 times for import and in-transit and a minimum of 2 times for FROB to identify the following points:
1. Place of Receipt (R)2. Customs Office of Manifest Origin (3) -
M 4/10
MM Note: When FROB is
Version 4010 106Empty
A6A Marine Cargo Report for EMPTY (Bill of Lading) Mapping to ANSI 311
Segment ID Element Name Notes Attributes CodesMANDATORY when reporting import and/or in-transit cargo.3. Customs Office of Manifest Destination (4) - MANDATORY when reporting import and/or in-transit cargo.4. Place of Delivery (E)5. Sub-location Code for Office of Manifest Origin (T)6. Sub-location Code for Office of Manifest Destination (M)
Segments identifying any other points will not be used by Canada Customs
M
MO
O
reported the R4 ‘3’ (Customs Office of Manifest Origin) and ‘4’ (Customs Office of Manifest Destination) should NOT be reported.
01 (115) Port or Terminal Function Code
Code defining function performed at the port or terminal with respect to a shipment
M ID 1/1 R - Place of Receipt (Contractual)3 - Customs Office of Manifest Origin4 - Customs Office of Manifest DestinationE - Place of Delivery (Contractual)T- Sub-location Code for Office of Manifest Origin M - Sub-location Code for Office of Manifest Destination
02 (309) Location Qualifier Code identifying type of location X ID 1/2 CD - Canadian Customs Office CodeCI - CitySC - City/State and Points Within
03 (310) Location Identifier Code which identifies a specific location or free-form description.
X AN 1/25 Canada Customs Office Codes - see Appendix E,
Version 4010 107Empty
A6A Marine Cargo Report for EMPTY (Bill of Lading) Mapping to ANSI 311
Segment ID Element Name Notes Attributes Codes
When R401 is ‘R’, R403 is MANDATORY (free-form description)When R401 is ‘3’, R403 is MANDATORY for import (use Canada Customs Office Codes)When R401 is ‘4’, R403 is MANDATORY for import (use Canada Customs Office Codes)When R401 is ‘E’, R403 is MANDATORY (free-form description)When R401 is ‘T’ or ‘M’, R403 (sub-location code) must be associated with the port being reported on R401 ‘3’ and/or ‘4’
Table #1
Sub-location Codes - see Appendix E, Table #4
04 (114) Port Name Free-form name for the place at which an offshore carrier originates or terminates its actual ocean carriage of property.
When R401 is ‘R’ and/or ‘E’, R404 is MANDATORY
O AN 2/24
05 (26) Country Code Code identifying the country
When R401 is ‘R’ and/or ‘E’, R405 is MANDATORY
O ID 2/3
06 (174) Terminal Name Free-form field for terminal name
When R401 is ‘3’, R406 is MANDATORY
O AN 2/30
07 (113) Pier Number Identifying number for the pierWhen R401 is ‘3’, R407 is OPTIONAL
O AN 1/4
SYNTAX NOTES02 P0203 - If either R402 or R403 is present, then the other is required.Loop ID –LX M 1/999LX Assigned Number To reference a line number in a transaction set M 1/1
01 (554) Assigned Number Number assigned for differentiation within a transaction set
M N0 1/6
Version 4010 108Empty
A6A Marine Cargo Report for EMPTY (Bill of Lading) Mapping to ANSI 311
Segment ID Element Name Notes Attributes CodesY2 Container Details To specify container information and
transportation service to be used. M 1/1 CCRA will only accept
one Y2 per LX.03 (56) Type of Service Type of service being provided. M ID 2/2 AI - Transport Mode
ChangeBB - BreakbulkCS - Container StationCY - Container YardDD - Door to DoorDR - Door to RampHA - HaulageHH - House to houseHL - Headload or DevanningHP - House to PierMC - Multi-country ConsolidationMD - Mixed DeliveryNC - Non-containerized cargoPH - Pier to housePP - Pier to PierRD - Ramp to DoorRE - Ramp to RampRR - Roll-on Roll-off
04 (24) Equipment Type Code This will be coded as per ISO table utilizing both Equipment Size and Type Codes.
M ID 4/4 Equipment Size Codes - see Appendix E, Table #5 Equipment Type Codes - see Appendix E, Table #6
ED Equipment Description To identify further the referenced equipment M 1/1 CCRA will only accept one ED per LX.
01 (206) Equipment Initial Prefix or alphabetic part of an equipment unit’s identifying number.
M AN 1/4
02 (207) Equipment Number Sequencing or serial part of an equipment unit’s identifying number (pure numeric form for equipment number is preferred)
M AN 1/10
Version 4010 109Empty
A6A Marine Cargo Report for EMPTY (Bill of Lading) Mapping to ANSI 311
Segment ID Element Name Notes Attributes Codes03 (322) Load/Empty Status
CodeCode which specifies the loaded condition of transportation equipment
M ID 1/1 E – Empty
END OF LX LOOPK1 Remarks To transmit information in a free-form format
for comment or special instructionO 0/2
01 (61) Free-Form Message Free-form information (Indicate Permits by using ‘P’ – FOR FUTURE USE
M AN 1/30
02 (61) Free-Form Message Free-form information O AN 1/30SE Transaction Set Trailer To indicate the end of the transaction set and
provide the count of the transmitted segments (including the beginning (ST) and ending (SE) segments)
M 1/1
01 (96) Number of Included Segments
Total number of segments included in a transaction set including ST and SE segments
M N0 1/10
02 (329) Transaction Set Control Number
Identifying control number that must be unique within the transaction set functional group assigned by the originator for a transaction set
M AN 4/9
Version 4010 110Empty
SEGMENT PURPOSE DIAGRAM EMPTY CARGOPurpose: Ocean carriers use this transaction set to communicate empty cargo information to Canadian Customs.
ST TRANSACTION SETS
Purpose: To indicate the start of a transaction set and to assign a control number.
ST
ST01 143
Transaction Set ID CD
M ID 03/03
*
ST02 329
Trans. Set Control Number M AN 04/09
NL
B2A SET PURPOSE
Purpose: To allow for positive identification of transaction set purpose.
B2A
B2A01 353
Transaction Set Purpose Code
M ID 02/02
*
B2A02 346
Application Type
M ID 02/02
NL
N9 REFERENCE IDENTIFICATION
Purpose: To transmit identifying information as specified by the reference identification qualifier. This segment will be repeated a minimum of 4 times for empty container reporting.
N9
N901 128
Reference Identification Qualifier
M ID 02/03
*
N902 127
ReferenceIdentification R0203
M AN 01/35
NL
Version 4010 111Empty
V1 VESSEL INFORMATION
Purpose: To provide vessel details and voyage number.
V1 *
V102 182
Vessel Name R0102
M AN 02/28
* *
V104 55
Flt/Voyage Number
M AN 02/10
NL
V3 VESSEL SCHEDULE
Purpose: To transmit vessel scheduling information.
V3
V301 318
Current Port of Loading
M AN 05/05
* * *
V303 316
Port of Arrival
M AN 05/05
NL
N1 NAME
Purpose: To identify a party by type of organization, name and code.
N1
N101 98
Entity IDCode
M ID 02/03
*
N102 93
NameR0203
M AN 01/35
NL
N2 ADDITIONAL NAME INFORMATION
Purpose: To specify additional names or those longer than 35 characters in length.
N2
N201 93
Name
O AN 01/35
*
N202 93
Name
O AN 01/35
NL
Version 4010 112Empty
N3 ADDRESS INFORMATION
Purpose: To specify the location of the named party.
N3
N301 166
Address
M AN 01/35
*
N302 166
Address
O AN 01/35
NL
N4 GEOGRAPHIC LOCATION
Purpose: To specify the geographic place of the named party.
N4
N401 19
CityNameR0105
M AN 02/30
*
N402 156
State/Prov.CodeC0102
O ID 02/02
*
N403 116
Postal or ZIPCode
O ID 03/09
*
N404 26
Country Code
M ID 02/03
NL
R4 PORT OR TERMINAL
Purpose: Contractual or operational port or point relevant to the movement of the cargo. This segment will be used a minimum of 4 times when reporting import empty containers and a minimum of 2 times when reporting FROB empty containers.
R4
R401 115
Port Function Code
M ID 01/01
*
R402 309
Location Qualifier
X ID 01/02
*
R403 310
Location Identifier
X AN 1/25
*
R404 114
Port Name
O AN 02/24
*
R405 26
Country Code
O ID 02/03
*
R406 174
Terminal Name
O AN 02/30
*
R407 113
Pier Number
O AN 01/04
NL
Version 4010 113Empty
LX ASSIGNED NUMBER
Purpose: To reference a line number in a transaction set.
LX
LX01 554
Assigned Number
M NO 01/06
NL
Y2 CONTAINER DETAILS
Purpose: To specify container information and transportation service to be used.
Y2 * *
Y203 56
Type of Service
M ID 02/02
Y204 24
Equipment Type
M ID 04/04
NL
ED EQUIPMENT DESCRIPTION
Purpose: To adequately identify the equipment being referred to.
ED
ED01 206
Equipment Initial
M AN 01/04
*
ED02 207
Equipment Number
M AN 01/10
*
ED03 322
Load/Empty Status
M ID 01/01
NL
Version 4010 114Empty
K1 REMARKS
Purpose: To transmit information in a free-form format, if necessary, for comment or special instruction.
K1
K101 61
Free Form Message
M AN 01/30
*
K102 61
Free Form Message
O AN 01/30
NL
SE TRANSACTION SET TRAILER
Purpose: To indicate the end of the transaction set and provide the count of the transmitted segments including the beginning ST and ending SE segments.
SE
SE01 96
Number of Included Segments
M NO 01/10
*
SE02 329
Transaction Set Control No.
M AN 04/09
NL
Version 4010 115Empty
A6A Empty Containers - Looping Diagram
Version 4010 116Empty
Seg.ID Name M/O Max. Use Loop ReferenceST Transaction Set Header M 1B2A Set Purpose M 1N9 Reference Number M 99V1 Vessel Identification M 1V3 Vessel Schedule M 1N1 Name O 1 N 0 / 10N2 Additional Name O 1N3 Address Information O 2N4 Geographic Location O 1R4 Port M 10LX Assigned Number M 1 LX / 999Y2 Container Details M 1ED Equipment Description M 1K1 Remarks O 2SE Transaction Set Trailer M 1
SAMPLEA6A – EMPTY CONTAINERS
IN INTERNATIONAL SHUTTLE SERVICE
Three empty containers in international shuttle service are picked up in Montivilliers, France to be shipped out of Le Havre, France, to Montreal, Canada.
ISA*00* *00* *ZZ*ABCD *ZZ*RCCECECPP *030922*1915*U*00401*000000388*0*P*^GS*SO*9999*E10*20030922*1915*123*X*004010ST*311*123001B2A*00*24N9*BI*9999N9*MA*CEACICONV1N9*OB*EMPTY3N9*AAO*9888CEACICONV1V1**VESSELNAME**21WV3*FRLEH**CAMTRR4*R*CI*MONTIVILLIERS*LE HAVRE*FRR4*3*CD*0395***TERMINAL NAME*32R4*4*CD*0395***TERMINAL NAME*32R4*E*CI*MONTREAL QC*MONTREAL QC*CALX*1Y2****CY*40SNED*ABCD*2345678*ELX*2Y2****CY*40SNED*ABCD*3334444*ELX*3Y2****CY*40SNED*ABCD*5556666*ESE*22*123001GE*1*123IEA*1*000000388
Version 4010 117Export
Export Cargo and Conveyance
Carriers will have the option of electronically transmitting export cargo and conveyance data. Vessel and consortium carriers who choose to transmit export cargo and conveyance data electronically to Customs will do so within 72 hours after departing the Canadian port. It is important to note that the A6 conveyance report must be transmitted prior to the A6A cargo report.
As opposed to inward conveyance reporting, consortium carriers will continue to submit individual A6 conveyance reports to Customs.
A paper outward conveyance report will continue to be mandatory prior to departure in accordance with current procedures.
Clients should refer to the Reporting of Exported Goods Regulations for details on the export reporting requirements for cargo and conveyance. Questions regarding export processing may also be addressed to:
Canada Customs and Revenue AgencyExport Process Division 15th Floor, Sir Richard Scott Building191 Laurier Ave. W.Ottawa, OntarioK1A0L5Phone: 613-954-7160Fax: 613-946-0241Email: [email protected]
The CCRA will transfer the carrier’s electronic export cargo and conveyance reports to Statistics Canada electronically.
Version 4010 118Export
A6A MARINE EXPORT CARGO MAP
Interchange and Functional Group Headers and Trailer to ANSI 311 Canadian Customs Information
Segment ID Element Reference ID/Name Notes Attributes CodesISA Interchange Control Header To start and identify an interchange of zero or
more functional groups and interchange-related control segments
M 1/1
01 (I01) Authorization Information Qualifier
Code to identify the type of information in the Authorization Information
M ID 2/2 00 - No Authorization Information Present (No Meaningful Information in I02)
02 (I02) Authorization Information Information used for additional identification or authorization of the interchange sender or the data in the interchange; the type of information is set by the Authorization Information Qualifier (I01)
M AN 10/10
03 (I03) Security Information Qualifier
Code to identify the type of information in the Security Information
M ID 2/2 00 No Security Information Present (No Meaningful Information in I04)
04 (I04) Security Information This is used for identifying the security information about the interchange sender or the data in the interchange; the type of information is set by the Security Information Qualifier (I03)
M AN 10/10
05 (I05) Interchange ID Qualifier Qualifier to designate the system/method of code structure used to designate the sender or receiver ID element being qualified
M ID 2/2
06 (I06) Interchange Sender ID Identification code published by the sender for other parties to use as the receiver ID to route data to them; the sender always codes this value in the sender ID element
M AN 15/15
07 (I05) Interchange ID Qualifier Qualifier to designate the system/method of code structure used to designate the sender or receiver ID element being qualified
M ID 2/2 ZZ Mutually Defined
Version 4010 120Export
Interchange and Functional Group Headers and Trailer to ANSI 311 Canadian Customs Information
Segment ID Element Reference ID/Name Notes Attributes Codes08 (I07) Interchange Receiver ID Identification code published by the receiver
of the data; When sending, it is used by the sender as their sending ID, thus other parties sending to them will use this as a receiving ID to route data to them
M AN 15/15
09 (I08) Interchange Date Date of the interchange M DT 6/6 Still six digits10 (I09) Interchange Time Time of the interchange M TM 4/411 (I10) Interchange Control
Standards Identifier Code to identify the agency responsible for the control standard used by the message that is enclosed by the interchange header and trailer
M ID 1/1 U - U.S. EDI Community of ASC X12, TDCC, and UCS
12 (I11) Interchange Control Version Number
This version number covers the interchange control segments
M ID 5/5 00401
13 (I12) Interchange Control Number
A control number assigned by the interchange Sender
M NO 9/9
14 (I13) Acknowledgment Requested
Code sent by the sender to request an interchange acknowledgment (TA1)
M ID 1/1 0 – No Acknowledgment RequestedCanada Customs does not currently provide this functionality
15 (I14) Usage Indicator Code to indicate whether data enclosed by this interchange envelope is test, production or information
M ID 1/1 T – TestP – Production
16 (I15) Component Element Separator
Type is not applicable; the component element separator is a delimiter and not a data element; this field provides the delimiter used to separate component data elements within a composite data structure; this value must be different than the data element separator and the segment terminator
M 1/1
GS Functional Group Header To indicate the beginning of a functional group and to provide control information
M 1/1
01 (479) Functional Identifier Code identifying a group of application M ID 2/2 SO – Ocean Shipment
Version 4010 121Export
Interchange and Functional Group Headers and Trailer to ANSI 311 Canadian Customs Information
Segment ID Element Reference ID/Name Notes Attributes CodesCode related transaction sets Information
02 (142) Application Sender’s Code
Code identifying party sending transmission; codes agreed to by trading partners
M AN 2/15 Canada Customs Carrier Code
03 (124) Application Receiver’s Code
Code identifying party receiving transmission. Codes agreed to by trading partners
M AN 2/15 A6A – Cargo
04 (373) Date Date expressed as CCYYMMDD M DT 8/805 (337) Time Time expressed in 24-hour clock time as
follows: HHMM, or HHMMSS, or HHMMSSD, or HHMMSSDD, where H = hours (00-23), M = minutes (00-59), S = integer seconds (00- 59) and DD = decimal seconds; decimal seconds are expressed as follows: D = tenths (0-9) and DD = hundredths (00-99)
M TM 4/8
06 (28) Group Control Number Assigned number originated and maintained by the sender
M NO 1/9
07 (455) Responsible Agency Code
Code used in conjunction with Data Element 480 to identify the issuer of the standard
M ID 1/2 X – Accredited Standards Committee X12
08 (480) Version / Release / Industry Identifier Code
Code indicating the version, release, subrelease, and industry identifier of the EDI standard being used, including the GS and GE segments; if code in DE455 in GS segment is X, then in DE 480 positions 1-3 are the version number; positions 4-6 are the release and subrelease, level of the version; and positions 7-12 are the industry or trade association identifiers (optionally assigned by user); if code in DE455 in GS segment is T, then other formats are allowed
M AN 1/12 004010
GE Functional Group Trailer To indicate the end of a functional group and to provide control information
M 1/1
01 (97) Number of Transaction Total number of transaction sets included in M NO 1/6
Version 4010 122Export
Interchange and Functional Group Headers and Trailer to ANSI 311 Canadian Customs Information
Segment ID Element Reference ID/Name Notes Attributes CodesSets Included the functional group or interchange
(transmission) group terminated by the trailer containing this data element
02 (28) Group Control Number Assigned number originated and maintained by the sender
M NO 1/9
IEA To define the end of an interchange of zero or more functional groups and interchange-related control segments
M 1/1
01 (I16) Number of Included Functional Groups M NO 1/502 (I12) Interchange Control Number M NO 1/9
Version 4010 123Export
A6A Marine Cargo Report for EXPORT (Bill of Lading) Mapping to ANSI 311Segment ID Element Name Notes Attributes Codes
ST Transaction Set Header To indicate the start of a transaction set and to assign a control number
M 1/1
01 (143) Transaction set ID M ID 3/3 31102 (329) Transaction set control
numberM AN 4/9
B2A Set Purpose To allow for positive identification of transaction set purpose
M 1/1
01 (353) Transaction Set Purpose Code
Code identifying purpose of transaction set M ID 2/2 00 – original03 – delete04 – change
02 (346) Application Type Code identifying an application - to indicate that the transmission is an A6A cargo declaration associated with a departure from Canada (export).
M ID 2/2 25 – Exported Goods
N9 Reference Identification To transmit identifying information as specified by the Reference Identification Qualifier
Canada Customs Cargo Control Number (CCN) will be constructed by concatenating the N902s with the following qualifiers:BI - Carrier Code +MA - Report Number + OB - Bill of Lading AAO - Carrier Assigned Code + MA
7T - ATDN Associated Transport Document Number (Export Transaction Number) (Related Transaction Reference Number)XP - Previous Cargo Control NumberCI - Unique Consignment Reference Number V0 – Version
Note: There can be only 1 BI, 1 MA, 1 OB
M 5/99
MMMM
O
OO
O
It should be noted that there must be either a 7T or XP submitted.
Version 4010 124Export
A6A Marine Cargo Report for EXPORT (Bill of Lading) Mapping to ANSI 311Segment ID Element Name Notes Attributes Codes
and 1 AAO. There may be multiple 7Ts or multiple XPs but there cannot be 7T(s) and XP(s).
Any additional N9 segments will not be use by Canada Customs
01 (128) Reference Identification Qualifier
Code qualifying the Reference Identification M ID 2/3 BI - Bonded Cargo Carrier ID NumberMA – Cargo Carrier Report Number (may or may not be the same as the vessel carrier’s conveyance report number contained in the AAO).OB - Ocean Bill of LoadingAAO – Vessel Carrier Assigned Code + MA (Vessel Carrier’s Conveyance Report number) = (for cargo reporting, this will be the vessel carrier code plus the vessel carrier’s conveyance report number)7T - ATDN Associated Transport Document Number (Export Transaction Number) (Related Transaction Reference Number)XP – Previous Cargo Control NumberCI – Unique ConsignmentV0 – Version
02 (127) Reference Identification BI – Carrier Code - unique code assigned to the cargo carrier by Canada Customs
M AN 1/35
Version 4010 125Export
A6A Marine Cargo Report for EXPORT (Bill of Lading) Mapping to ANSI 311Segment ID Element Name Notes Attributes Codes
MA – Report Number - a non-duplicating number assigned by carriers that serves to uniquely identify an A6 conveyance - an "E" in the first position of the number indicates an EDI transmission - a "CE" in the first and second positions of the number indicates an EDI transmission and the cargo is on a voyage with consortiums partners. This number may or may not be the same as the vessel carrier’s conveyance report contained in the AAO.
OB – Bill of Loading Number - this is the number of the ocean bill of loading - it is a non-duplicating number assigned by the carrier or agent to uniquely identify a cargo declaration
AAO- Vessel Carrier Code + MA issued by the vessel carrier. This will be used to identify the Conveyance Reference Number for this particular voyage. This will be the vessel carrier code plus the vessel carrier’s conveyance report number.
7T - ATDN Associated Transport Document Number (Export Transaction Number) (Related Transaction Reference Number)
XP - Previous Cargo Control Number
CI – Unique Consignment Reference Number
V0 – Version. Data in this element is returned in the REF02 of the corresponding Application Advice (824) message.
7T - If no declaration is required then indicate ‘NDR’.
It should be noted that there must be either a 7T or XP submitted.
V1 Vessel Identification To provide vessel details and voyageNumber
M 1/1
Version 4010 126Export
A6A Marine Cargo Report for EXPORT (Bill of Lading) Mapping to ANSI 311Segment ID Element Name Notes Attributes Codes
02 (182) Vessel Name Name of ship as documented in "Lloyd’s Register of Ships"
M AN 2/28
04 (55) Flight/Voyage Number Identifying designator for the particular flight or voyage on which the cargo travels
M AN 2/10
V3 Vessel Schedule To transmit vessel scheduling information M 1/1
01 (318) Current Port of Loading Canadian port at which cargo is currently being loaded
M AN 5/5 United Nations Location Code (UNLOCODE) will be used for this element. See Appendix E, Table #8.
03 (316) Port of Destination This will be the first foreign port of discharge of the cargo.
M AN 5/5 United Nations Location Code (UNLOCODE) will be used for this element. See Appendix E, Table #8.
DTM Date/Time Reference Actual date and time of the departure of the vessel from Canada.
M 1/1
01 Date/Time Reference (374) M ID 3/3 370- Actual Date and Time of Departure
02 Date (373) M DT 8/8
03 Time (337) M TM 4/8
Loop ID – N1 To identify a party by type of organization, name, and code
This loop will be used a minimum of 2 times to identify the following parties:
1. Shipper (name and address of party which, by contract with a carrier, consigns or sends goods with the carrier, or has them conveyed by him.) 2. Consignee3. Notify Party4. Delivery Address - address of physical location at which the goods are consigned to be delivered.
M 2/10
M
MOO
Version 4010 127Export
A6A Marine Cargo Report for EXPORT (Bill of Lading) Mapping to ANSI 311Segment ID Element Name Notes Attributes Codes
Provide if KNOWN and if different from consignee’s address.
NOTE: There can be only 1 shipper, 1 consignee, 1 Delivery Address AND multiple Notify Parties for a total of up to ten.
Loops identifying any other parties will not be used by Canada Customs.
N1 Name To identify a party by type of organization, name, and code
M 1/1
01 (98) Entity Identifier Code Code identifying an organizational entity, a physical location, property or an individual
M ID 2/3 SH - ShipperCN - Consignee NP - Notify PartyAE - Delivery Address
02 (93) Name Free-form name M AN 1/35N2 Additional Name Information To specify additional contact names O 0/1
01 (93) Name Free-form contact name 1 O AN 1/35 Must provide a contact name when providing ‘AE’ Delivery Address.
02 (93) Name Free-form contact name 2 O AN 1/35N3 Address Information To specify the location of the named party M 1/2
01 (166) Address Information M AN 1/3502 (166) Address Information Place telephone number in the N302 of the
first occurrence of the N3 segment.O AN 1/35
N4 Geographic Location To specify the geographic place of the named party
M 1/1
01 (19) City Name Free-form text for city name M AN 2/3002 (156) State or Province Code Code (Standard State/Province) as defined by
appropriate government agency
When N404 is US or CA, N402 is
O ID 2/2 Province/State Codes – see Appendix E, Table #9.
Version 4010 128Export
A6A Marine Cargo Report for EXPORT (Bill of Lading) Mapping to ANSI 311Segment ID Element Name Notes Attributes Codes
MANDATORY03 (116) Postal Code Code defining international postal zone code
excluding punctuation and blanks (zip code for United States)
O ID 3/9
04 (26) Country Code Code identifying the country M ID 2/3 Codes for Representation of Names of Countries, ISO 3166 – see Appendix E, Table #2.
END OF N1 LOOPR4 Port or Terminal Contractual or operational port or point
relevant to the movement of the cargoThis segment will be used a minimum of 3 times to identify the following points:
1. Place of Receipt (R)2. Port of Exit (3)3. Place of Destination (E)4. Port of Exit Sub-location office code (warehouse code) (T)
Segments identifying any other points will not be used by Canada Customs
M 3/10
MMMO
01 (115) Port or Terminal Function Code
Code defining function performed at the port or terminal with respect to a shipment
M ID 1/1 R - Place of Receipt (Contractual)3 - Port of Exit E - Place of Destination T - Port of Exit Sub-location office code (warehouse code)
02 (309) Location Qualifier Code identifying type of location X ID 1/2 CD - Canadian Customs Office CodeCI - CitySC - City/State and Points Within
Version 4010 129Export
A6A Marine Cargo Report for EXPORT (Bill of Lading) Mapping to ANSI 311Segment ID Element Name Notes Attributes Codes
03 (310) Location Identifier Code which identifies a specific location or free-form description.
When R401 is ‘R’, R403 is MANDATORY (free-form description)When R401 is ‘3’, R403 is MANDATORY (use Canada Customs Office Codes)When R401 is ‘E’, R403 is MANDATORY (free-form description)When R401 is ‘T’, R403 (sub-location code) must be associated with the port being reported on R401 ‘3’
X AN 1/25 Canada Customs Office Codes - see Appendix E Table #1
Sub-location Codes - see Appendix E Table #4
04 (114) Port Name Free-form name for the place at which an offshore carrier originates or terminates its actual ocean carriage of property.
When R401 is ‘R’ and/or ‘E’, R404 is MANDATORY
O AN 2/24
05 (26) Country Code Code identifying the country
When R401 is ‘R’ and/or ‘E’, R405 is MANDATORY
O ID 2/3
06 (174) Terminal Name Free-form field for terminal nameWhen R401 is ‘3’, R406 is MANDATORY
O AN 2/30
07 (113) Pier Number Identifying number for the pierWhen R401 is ‘3’, R407 is OPTIONAL
O AN 1/4
SYNTAX NOTES02 P0203 - If either R402 or R403 is present, then the other is required.Loop ID –LX M 1/999LX Assigned Number To reference a line number in a transaction set M 1/1
01 (554) Assigned Number Number assigned for differentiation within a transaction set
M N0 1/6
Y2 Container Details To specify container information and O 0/1 CCRA will only accept one
Version 4010 130Export
A6A Marine Cargo Report for EXPORT (Bill of Lading) Mapping to ANSI 311Segment ID Element Name Notes Attributes Codes
transportation service to be used.
MANDATORY if containerized.
Y2 per LX.
03 (56) Type of Service Type of service being provided. M ID 2/2 AI- Transport Mode ChangeBB- BreakbulkCS- Container StationCY- Container YardDD- Door to DoorDR- Door to RampHA- HaulageHH- House to houseHL- Headload or DevanningHP- House to PierMC- Multi-country ConsolidationMD- Mixed DeliveryNC- Non-containerized cargoPH- Pier to housePP- Pier to PierRD- Ramp to DoorRE- Ramp to RampRR- Roll-on Roll-off
04 (24) Equipment Type Code This will be coded as per ISO table utilizing both Equipment Size and Type Codes.
M ID 4/4 Equipment Size Codes - see Appendix E, Table #5 Equipment Type Codes - see Appendix E, Table #6
ED Equipment Description To identify further the referenced equipment
MANDATORY if containerized.
O 0/1 CCRA will only accept one ED per LX.
01 (206) Equipment Initial Prefix or alphabetic part of an equipment unit’s identifying number.
M AN 1/4
02 (207) Equipment Number Sequencing or serial part of an equipment unit’s identifying number (pure numeric form for equipment number is preferred)
M AN 1/10
Version 4010 131Export
A6A Marine Cargo Report for EXPORT (Bill of Lading) Mapping to ANSI 311Segment ID Element Name Notes Attributes Codes
03 (322) Load/Empty Status Code Code which specifies the loaded condition of transportation equipment
M ID 1/1 L – LoadedE – Empty
For Empty, system will accept zero in the quantity on the L0.For Loaded, system will not accept zero in quantity in L0.
M7 Seal Numbers To record seal numbers used and the organization that applied the seals
O 0/5
01 (225) Seal Number Unique number on seal used to close a shipment
M AN 2/15
02 (225) Seal Number O AN 2/1503 (225) Seal Number O AN 2/1504 (225) Seal Number O AN 2/15
LOOP ID – LX\L0 M 1/120
L0 Line Item - Quantity and Weight
To specify quantity, weight, volume, and type of service for a line item including applicable "quantity/rate-as" data
M 1/1
01 (213) Lading Line Item Number
Sequential line number for a lading itemThis number must be unique within the transaction set.
M N0 1/3
04 (81) Weight Numeric value of weight M R 1/1005 (187) Weight Qualifier Code defining the type of weight M ID 1/2 G – Gross Weight06 (183) Volume Value of volumetric measure X R 1/807 (184) Volume Unit Qualifier Code identifying the volume unit X ID 1/1 B - Barge
C - Cubic CentimetresD - CordE - Cubic FeetF - 100 Board Feet
Version 4010 132Export
A6A Marine Cargo Report for EXPORT (Bill of Lading) Mapping to ANSI 311Segment ID Element Name Notes Attributes Codes
G -– Gallons UKH - Hundreds of Measurement TT - TonsI – Gallons US DryJ – Gallons US LiquidK - Hundreds of Measurement TT – Tons ShortL - LoadM - Cubic DecimetresN - Cubic InchesP – Measurement Ton – ShortQ – Measurement Ton–MetricR - CarS - Measurement Ton – LongT - ContainerU - Volumetric UnitV - LitreX - Cubic Meters
08 (80) Lading Quantity Number of units (pieces) of the lading commodity
M N0 1/7
09 (211) Packaging Form Code Code for packaging form of the lading quantity
M ID 3/3 See Appendix E, Table #3 for codes.
11 (188) Weight Unit Code Code specifying the weight unit M ID 1/1 E - Metric TonK - KilogramsL - Pounds
SYNTAX NOTES06 P0607 - If either L006 or L007 is present, then the other is required.L5 Description, Marks and
NumbersTo specify the line item in terms of description, quantity, packaging, and marks and numbers
M 1/999
01 (213) Lading Line Item Number
Sequential line number for a lading item O N0 1/3
Version 4010 133Export
A6A Marine Cargo Report for EXPORT (Bill of Lading) Mapping to ANSI 311Segment ID Element Name Notes Attributes Codes
02 (79) Lading Description Description of an item must be clear and concise. The commodity description should be in plain language and detailed enough to allow Customs to identify the size, shape and characteristics of the commodity.
M AN 1/50
03 (22) Commodity Code Code describing a commodity or group of commodities
X AN 2/10 Optional
04 (23) Commodity Code Qualifier
Code identifying the commodity coding system used for Commodity Code
X ID 1/1 H - Brussels Nomenclature
06 (87) Marks and Numbers Marks and numbers used to identify a shipment or parts of a shipment
O AN 1/48 If client is reporting UN Code for Dangerous goods, use this element in conjunction with L5-07. See Appendix E, Table #7 for UN DANGEROUS GOODS Codes.
07 (88) Marks and Numbers Qualifier
Use this field to indicate ZZ if reporting DANGEROUS GOODS.
O ID 2/2 ZZ – Dangerous Goods
SYNTAX NOTESP0304 - If either L503 or L504 is present, then the other is required.
END OF LX LOOPK1 Remarks To transmit information in a free-form format
for comment or special instructionO 0/2
01 (61) Free-Form Message Free-form information M AN 1/3002 (61) Free-Form Message Free-form information O AN 1/30
SE Transaction Set Trailer To indicate the end of the transaction set and provide the count of the transmitted segments (including the beginning (ST) and ending (SE) segments)
M 1/1
01 (96) Number of Included Segments
Total number of segments included in a transaction set including ST and SE segments
M N0 1/10
02 (329) Transaction Set Control Number
Identifying control number that must be unique within the transaction set functional
M AN 4/9
Version 4010 134Export
A6A Marine Cargo Report for EXPORT (Bill of Lading) Mapping to ANSI 311Segment ID Element Name Notes Attributes Codes
group assigned by the originator for a transaction set
Version 4010 135Export
SEGMENT PURPOSE DIAGRAM CARGO EXPORTPurpose: Ocean carriers use this transaction set to communicate cargo export information to Canadian Customs.
ST TRANSACTION SETS
Purpose: To indicate the start of a transaction set and to assign a control number.
ST
ST01 143
Transaction Set ID CD
M ID 03/03
*
ST02 329
Trans. Set Control Number M AN 04/09
NL
B2A SET PURPOSE
Purpose: To allow for positive identification of transaction set purpose.
B2A
B2A01 353
Transaction Set Purpose Code
M ID 02/02
*
B2A02 346
Application Type
M ID 02/02
NL
N9 REFERENCE IDENTIFICATION
Purpose: To transmit identifying information as specified by the reference identification qualifier. This segment will be repeated a minimum of 5 times.
N9
N901 128
Reference Identification Qualifier
M ID 02/03
*
N902 127
ReferenceIdentification R0203
M AN 01/35
NL
Version 4010 136Export
V1 VESSEL INFORMATION
Purpose: To provide vessel details and voyage number.
V1 *
V102 182
Vessel Name R0102
M AN 02/28
* *
V104 55
Flt/Voyage Number
M AN 02/10
NL
V3 VESSEL SCHEDULE
Purpose: To transmit vessel scheduling information.
V3
V301 318
Current Port of Loading
M AN 05/05
* * *
V303 316
Port of Destination
M AN 05/05
NL
DTM DATE/TIME REFERENCE
Purpose: To specify pertinent dates and times.
DTM
DTM01 374
Date/TimeQualifier
M ID 03/03
*
DTM02 373
Date R0203
M DT 08/08
*
DTM03 337
Time R0203
M TM 04/08
NL
N1 NAME
Purpose: To identify a party by type of organization, name and code. This loop will be used a minimum of 2 times.
N1
N101 98
Entity ID Code
M ID 02/03
*
N102 93
Name R0203
M AN 01/35
NL
Version 4010 137Export
N2 ADDITIONAL NAME INFORMATION
Purpose: To specify additional names or those longer than 35 characters in length.
N2
N201 93
Name
O AN 01/35
*
N202 93
Name
O AN 01/35
NL
N3 ADDRESS INFORMATION
Purpose: To specify the location of the named party.
N3
N301 166
Address
M AN 01/35
*
N302 166
Address
O AN 01/35
NL
N4 GEOGRAPHIC LOCATION
Purpose: To specify the geographic place of the named party.
N4
N401 19
City Name R0105
M AN 02/30
*
N402 156
State/Prov. Code C0102
O ID 02/02
*
N403 116
Postal or ZIP Code
O ID 03/09
*
N404 26
Country Code
M ID 02/03
NL
Version 4010 138Export
R4 PORT OR TERMINAL
Purpose: Contractual or operational port or point relevant to the movement of the cargo. This segment will be used a minimum of 3 times.
R4
R401 115
Port Function Code
M ID 01/01
*
R402 309
Location Qualifier
X ID 01/02
*
R403 310
Location Identifier
X AN 1/25
*
R404 114
Port Name
O AN 02/24
*
R405 26
Country Code
O ID 02/03
*
R406 174
Terminal Name
O AN 02/30
*
R407 113
Pier Number
O AN 01/04
NL
LX ASSIGNED NUMBER
Purpose: To reference a line number in a transaction set.
LX
LX01 554
Assigned Number
M NO 01/06
NL
Y2 CONTAINER DETAILS
Purpose: To specify container information and transportation service to be used.
Y2 * *
Y203 56
Type of Service
M ID 02/02
Y204 24
EquipmentType
M ID 04/04
NL
Version 4010 139Export
ED EQUIPMENT DESCRIPTION
Purpose: To adequately identify the equipment being referred to.
ED
ED01 206
Equipment Initial
M AN 01/04
*
ED02 207
Equipment Number
M AN 01/10
*
ED03 322
Load/Empty Status
M ID 01/01
NL
M7 SEAL NUMBERS
Purpose: To record seal numbers used.
M7
M701 225
Seal Number
M AN 02/15
*
M702 225
Seal Number
O AN 02/15
*
M703 225
Seal Number
O AN 02/15
*
M704 225
Seal Number
O AN 02/15
NL
L0 LINE ITEM - QUANTITY AND WEIGHT
Purpose: To specify quantity, weight and volume for a line item including applicable 'quantity/rated-AS' data.
L0
L001 213
Lading Line Number
M N0 01/03
* * *
L004 81
Weight
M R 01/10
*
L005 187
Weight Qualifier P040511
M ID 01/02
*
L006 183
Volume P0607
X R 01/08
*
L007 184
Volume Unit Qualifier P0607
X ID 01/01
*
L008 80
Lading Quantity P0809
M N0 01/07
*
L009 211
Packaging Form Code P0809
M ID 03/03
* *
L011 188
Weight Unit Qualifier P040511
M ID 01/01
*NL
Version 4010 140Export
L5 DESCRIPTION, MARKS AND NUMBERS
Purpose: To specify the line item in terms of description, quantity, packaging and marks and numbers.
L5
L501 213
Lading Line No.
O N0 01/03
*
L502 79
LadingDescription
O AN 01/50
*
L503 22
Commodity Code P0304
X AN 02/10
*
L504 23
Commodity Code Qual. P0304
X ID 01/01
* *
L506 87
Marks &Numbers
O AN 01/48
*
L507 88
Marks and Numbers Qualifier
O ID 02/02
*NL
K1 REMARKS
Purpose: To transmit information in a free-form format, if necessary, for comment or special instruction.
K1
K101 61
Free Form Message
M AN 01/30
*
K102 61
Free Form Message
O AN 01/30
NL
SE TRANSACTION SET TRAILER
Purpose: To indicate the end of the transaction set and provide the count of the transmitted segments including the beginning ST and ending SE segments.
SE
SE01 96
Number of Included Segments
M NO 01/10
*
SE02 329
Transaction Set Control No.
M AN 04/09
NL
Version 4010 141Export
A6A Export Cargo – Looping Diagram
Version 4010 142Export
Seg.ID Name M/O Max. Use Loop ReferenceST Transaction Set Header M 1B2A Set Purpose M 1N9 Reference Number M 99V1 Vessel Identification M 1V3 Vessel Schedule M 1DTM Date/Time Reference M 1N1 Name M 1 N2 / 10N2 Additional Name O 1N3 Address Information M 2N4 Geographic Location M 1R4 Port M 10LX Assigned Number M 1 LX / 999Y2 Container Details O 1ED Equipment Description O 1M7 Seal Numbers O 5L0 Line Item - Quantity and Weight M 1 L0 / 120L5 Description - Marks and Numbers M 999K1 Remarks O 2SE Transaction Set Trailer M 1
SAMPLEA6A EXPORT CARGO
A container of salt and a container of sea scallops will be shipped from Halifax, Nova Scotia to Newark, New Jersey. The goods are consigned to a company in the Bronx, New York.
ISA*00* *00* *ZZ*ABCD *ZZ*RCCECECPP *030922*1915*U*00401*000113177*0*P*^GS*SO*9966*A6A*20030922*1915*321*X*004010ST*311*123008B2A*00*25N9*BI*9966N9*MA*CEOUTCONV5N9*OB*CARGO1N9*AAO*9977CEOUTCONV5N9*XP*77YYPREVCCNV1**VESSELNAME**25WV3*CAHAL**USNEKDTM*370*20030922*2100N1*SH*CANADA TRANSPORTN3*123 SALTER STREET*902-555-1212N4*HALIFAX*NS*B3J 1A1*CAN1*CN*XXX FOOD PACKERSN3*123 BLAINE STREETN4*BRONX*NY**USR4*R*CI*DIGBY NS*DIGBY NS*CAR4*3*CD*0009***TERMINAL NAME*9R4*E*CI*BRONX NY*NEWARK NJ*USLX*1Y2***CY*40SNED*ABCD*8765412*LM7*AEYJ12345L0*1***19500*G*1280*E*160*BBL**KL5*1*SEA SCALLOPSLX*2Y2***CY*40SNED*EFGH*4888006*LM7*GPLN23467L0*2***8350*G*1080*E*18*BAG**KL5*2*SALTSE*32*123008GE*1*321
IEA*1*000113177
Version 4010 143Export
Marine Conveyance Reporting
The conveyance data will include details identifying the vessel, its capacities, trade chain partners, scheduling and routing information.
For all vessels bound for Canada and transporting goods in cargo containers, the conveyance report must be transmitted electronically to Customs within 24 hours of departure from the last foreign port of loading on its direct voyage to Canada.
For all vessels bound for Canada and transporting bulk goods, the conveyance report must be transmitted electronically to Customs at least 24 hours prior to the ship’s arrival in Canada.
For all vessels bound for Canada and transporting all other goods (i.e., not bulk, not containerized), the conveyance report must be transmitted electronically to Customs within 24 hours of departure from the last foreign port of loading prior to its direct voyage to Canada, unless authorization has been granted by CCRA to transmit the conveyance report 24 hours prior to arrival in Canada.
For all vessels bound for Canada and transporting a combination of goods described above, the conveyance data must be transmitted electronically to CCRA within the most advanced (i.e. longest) timeframe stated for the goods transported. For example, for a ship carrying both containerized and bulk goods the conveyance data must be transmitted electronically to CCRA within 24 hours of departure from the last foreign port of loading.
Where the cargo is on a voyage with consortium partners, the master carrier is responsible for providing a conveyance report for the vessel. It will be the responsibility of the master carrier to advise all consortium members of the conveyance report number in a timely manner to enable their transmission of A6A cargo data. Consortium carriers should not transmit an inward A6 conveyance report.
Advance electronic conveyance reporting is not currently mandatory for vessels bound for Canada that contain only goods that were laden in the United States. Current conveyance reporting requirements will continue to be acceptable for these vessels and their cargo.
Changes to conveyance information that has been provided in advance may be made electronically at any time prior to the arrival of the vessel in Canada.
Updates to estimated time of arrival in Canada should be transmitted to Customs as required.
Version 4010 144Conveyance
A6 CONVEYANCE MARINE VESSEL MAP
Interchange and Functional Group Headers and Trailer to ANSI 311 Canadian Customs Information
Segment ID Element Reference ID/Name Notes Attributes CodesISA Interchange Control Header To start and identify an interchange of zero or
more functional groups and interchange-related control segments
M 1/1
01 (I01) Authorization Information Qualifier
Code to identify the type of information in the Authorization Information
M ID 2/2 00 - No Authorization Information Present (No Meaningful Information in I02)
02 (I02) Authorization Information Information used for additional identification or authorization of the interchange sender or the data in the interchange; the type of information is set by the Authorization Information Qualifier (I01)
M AN 10/10
03 (I03) Security Information Qualifier
Code to identify the type of information in the Security Information
M ID 2/2 00 No Security Information Present (No Meaningful Information in I04)
04 (I04) Security Information This is used for identifying the security information about the interchange sender or the data in the interchange; the type of information is set by the Security Information Qualifier (I03)
M AN 10/10
05 (I05) Interchange ID Qualifier Qualifier to designate the system/method of code structure used to designate the sender or receiver ID element being qualified
M ID 2/2
06 (I06) Interchange Sender ID Identification code published by the sender for other parties to use as the receiver ID to route data to them; the sender always codes this value in the sender ID element
M AN 15/15
07 (I05) Interchange ID Qualifier Qualifier to designate the system/method of code structure used to designate the sender or receiver ID element being qualified
M ID 2/2 ZZ Mutually Defined
Version 4010 146Conveyance
Interchange and Functional Group Headers and Trailer to ANSI 311 Canadian Customs Information
Segment ID Element Reference ID/Name Notes Attributes Codes08 (I07) Interchange Receiver ID Identification code published by the receiver
of the data; When sending, it is used by the sender as their sending ID, thus other parties sending to them will use this as a receiving ID to route data to them
M AN 15/15
09 (I08) Interchange Date Date of the interchange M DT 6/6 Still six digits10 (I09) Interchange Time Time of the interchange M TM 4/411 (I10) Interchange Control
Standards Identifier Code to identify the agency responsible for the control standard used by the message that is enclosed by the interchange header and trailer
M ID 1/1 U - U.S. EDI Community of ASC X12, TDCC, and UCS
12 (I11) Interchange Control Version Number
This version number covers the interchange control segments
M ID 5/5 00401
13 (I12) Interchange Control Number
A control number assigned by the interchange Sender
M NO 9/9
14 (I13) Acknowledgment Requested
Code sent by the sender to request an interchange acknowledgment (TA1)
M ID 1/1 0 – No Acknowledgment RequestedCanada Customs does not currently provide this functionality
15 (I14) Usage Indicator Code to indicate whether data enclosed by this interchange envelope is test, production or information
M ID 1/1 T – TestP – Production
16 (I15) Component Element Separator
Type is not applicable; the component element separator is a delimiter and not a data element; this field provides the delimiter used to separate component data elements within a composite data structure; this value must be different than the data element separator and the segment terminator
M 1/1
GS Functional Group Header To indicate the beginning of a functional group and to provide control information
M 1/1
01 (479) Functional Identifier Code identifying a group of application M ID 2/2 SO – Ocean Shipment
Version 4010 147Conveyance
Interchange and Functional Group Headers and Trailer to ANSI 311 Canadian Customs Information
Segment ID Element Reference ID/Name Notes Attributes CodesCode related transaction sets Information
02 (142) Application Sender’s Code
Code identifying party sending transmission; codes agreed to by trading partners
M AN 2/15 Canada Customs Carrier Code
03 (124) Application Receiver’s Code
Code identifying party receiving transmission. Codes agreed to by trading partners
M AN 2/15 A6 – Conveyance
04 (373) Date Date expressed as CCYYMMDD M DT 8/805 (337) Time Time expressed in 24-hour clock time as
follows: HHMM, or HHMMSS, or HHMMSSD, or HHMMSSDD, where H = hours (00-23), M = minutes (00-59), S = integer seconds (00- 59) and DD = decimal seconds; decimal seconds are expressed as follows: D = tenths (0-9) and DD = hundredths (00-99)
M TM 4/8
06 (28) Group Control Number Assigned number originated and maintained by the sender
M NO 1/9
07 (455) Responsible Agency Code
Code used in conjunction with Data Element 480 to identify the issuer of the standard
M ID 1/2 X – Accredited Standards Committee X12
08 (480) Version / Release / Industry Identifier Code
Code indicating the version, release, subrelease, and industry identifier of the EDI standard being used, including the GS and GE segments; if code in DE455 in GS segment is X, then in DE 480 positions 1-3 are the version number; positions 4-6 are the release and subrelease, level of the version; and positions 7-12 are the industry or trade association identifiers (optionally assigned by user); if code in DE455 in GS segment is T, then other formats are allowed
M AN 1/12 004010
GE Functional Group Trailer To indicate the end of a functional group and to provide control information
M 1/1
01 (97) Number of Transaction Total number of transaction sets included in M NO 1/6
Version 4010 148Conveyance
Interchange and Functional Group Headers and Trailer to ANSI 311 Canadian Customs Information
Segment ID Element Reference ID/Name Notes Attributes CodesSets Included the functional group or interchange
(transmission) group terminated by the trailer containing this data element
02 (28) Group Control Number Assigned number originated and maintained by the sender
M NO 1/9
IEA To define the end of an interchange of zero or more functional groups and interchange-related control segments
M 1/1
01 (I16) Number of Included Functional Groups M NO 1/502 (I12) Interchange Control Number M NO 1/9
Version 4010 149Conveyance
A6 CONVEYANCE Marine Vessel Report Mapping to ANSI 311 Canadian Customs InformationSegment ID Element Name Notes Attributes Codes
ST Transaction Set Header To indicate the start of a transaction set and to assign a control number
M 1/1
01 (143) Transaction set ID Code uniquely identifying a Transaction Set M ID 3/3 31102 (329) Transaction set control
numberIdentifying control number that must be unique within the transaction set functional group assigned by the originator for a transaction set
M AN 4/9
B2A Set Purpose To allow for positive identification of transaction set purpose
M 1/1
01 (353) Transaction Set Purpose Code
Code identifying purpose of transaction set M ID 2/2 00 – original03 – delete04 – change
02 (346) Application Type Code identifying an application - to indicate that the transmission is an A6 conveyance declaration associated with an arrival in Canada (inward), a departure from Canada (outward), or a stop in Canada on the way to another country (in-transit).
M ID 2/2 21 – Vessel Import (Inward)22 – Vessel Export (Outward)23 – Vessel In-Transit
N9 Reference Identification To transmit identifying information as specified by the Reference Identification QualifierThis segment will be repeated a minimum of 7 times. Numbers 1 through 7 below are mandatory:1. Carrier Code (BI)2. Report Number (MA)3. Safety of Ship Certificate Indicator (Z1)4. Safety Radio Certificate Indicator (Z2)5. Safety Equipment Certificate Indicator (Z3)6. Load Line Certificate Indicator (Z4)7. Derat Certificate Indicator (Z5)8. Maritime Declaration of Health Certificate Indicator (Z6)9. Civil Liability of Oil Certificate Indicator (Z7)10. Version (V0)
M 9/99
MMMMMMMM
MO
Version 4010 150Conveyance
A6 CONVEYANCE Marine Vessel Report Mapping to ANSI 311 Canadian Customs InformationSegment ID Element Name Notes Attributes Codes
Note: There can be only 1 BI, 1 MA, 1 Z1, 1 Z2, 1 Z3, 1 Z4, 1 Z5, 1 Z6 and 1 Z7.
01 (128) Reference Identification Qualifier
Code qualifying the Reference Identification M ID 2/3 1. BI - Bonded Carrier ID Number2. MA - Ship Notice/Manifest Number3. Z1 - Safety of Ship Certificate4. Z2 - Safety Radio Certificate5. Z3 - Safety Equipment Certificate6. Z4 - Load Line Certificate7. Z5 – Derat Certificate8. Z6 - Maritime Declaration of Health9. Z7 - Civil Liability of Oil Certificate10. V0 – Version
Version 4010 151Conveyance
A6 CONVEYANCE Marine Vessel Report Mapping to ANSI 311 Canadian Customs InformationSegment ID Element Name Notes Attributes Codes
02 (127) Reference Identification
1. (BI) Carrier Code - the official "marine carrier code" for the carrier assigned by Canada Customs 2. (MA) Report Number - a non-duplicating number assigned by carriers that serves to uniquely identify an A6 - an "E" in the first position of the number indicates an EDI transmission - a "CE" in the first and second positions of the number indicates an EDI transmission and the cargo is on a voyage with consortiums partners.3-9. (Z1-Z7) Document number if available, else populate field to meet ANSI mandatory field requirement.
10. (V0) For versioning control. Data in this element is returned in the REF02 of the corresponding Application Advice (824) message
M AN 1/35
04 (373) Date Mandatory for Certificates (Z1 – Z7)Indicate expiry date of certificates required by Canada Customs
M DT 8/8 CCYYMMDD
V1 Vessel Identification To provide vessel details and voyageNumber
M 1/1
01 (597) Vessel Code Lloyd’s Register of Shipping – ship’s radio call sign serves as vessel code.
M ID 1/8
02 (182) Vessel Name Name of ship as documented in "Lloyd’s Register of Ships"
M AN 2/28
03 (26) Country Code The code identifying the country in which the ship (vessel) is registered.
M ID 2/2 Codes for Representation of Names of Countries, ISO 3166 – see Appendix E, Table #2.
04 (55) Flight/Voyage Number Identifying designator for the particular flight or M AN 2/10
Version 4010 152Conveyance
A6 CONVEYANCE Marine Vessel Report Mapping to ANSI 311 Canadian Customs InformationSegment ID Element Name Notes Attributes Codes
voyage on which the cargo travels07 (854) Vessel Type Code Code to determine type of vessel M ID 2/2 BC Barge Carrying Vessels
(Lash & Seabee)BD Bulk-DryBI Barge-InlandBK Bulk-UndeterminedBL Bulk-LiquidBO Barge-Ocean-goingCB ConbulkCT ContainerDG DredgeDP Display VesselsFH FishingGC General CargoGT Government-Non-MilitaryMT MilitaryPC Partial ContainerPS PassengerRR Roll on/Roll offSP Supply ShipTG TugVH Vehicle Carrier
V2 Vessel Information To provide vessel detailsACROSS will accept up to 4 decimal places for weight and length fields
M 1/1
01 (310) Location Identifier The place of vessel registry M AN 1/30 02 (127) Reference
Identification The vessel registry number M AN 1/30
03 (81) Weight The vessel net registry tonnage M R 1/10 04 (188) Weight Unit Code Code specifying the weight unit M ID 1/1 E – metric tons
K – kilogramsL – pounds
Version 4010 153Conveyance
A6 CONVEYANCE Marine Vessel Report Mapping to ANSI 311 Canadian Customs InformationSegment ID Element Name Notes Attributes Codes
05 (81) Weight The vessel gross registry tonnage M R 1/10 06 (188) Weight Unit Code M ID 1/1 E – metric tons
K – kilogramsL – pounds
07 (81) Weight The vessel containerized cargo tonnage M R 1/10 08 (188) Weight Unit Code M ID 1/1 E – metric tons
K – kilogramsL – pounds
09 (81) Weight The vessel non-containerized cargo tonnage M R 1/10 10 (188) Weight Unit Code M ID 1/1 E – metric tons
K – kilogramsL – pounds
11 (81) Weight The vessel summer dead weight tonnage M R 1/10 12 (188) Weight Unit Code M ID 1/1 E – metric tons
K – kilogramsL – pounds
13 (93) Name The name of the master of the vessel M AN 1/35 14 (82) Length The length of the vessel M R 1/8 15 (355) Unit or Basis for
Measurement Code Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken
M ID 2/2 FT – footMR – meters
16 (380) Quantity Number of crew members M R 1/4 17 (380) Quantity Number of passengers M R 1/4
V3 Vessel Schedule To transmit vessel scheduling information M 1/101 (318) Last Foreign Port of
Loading for inward and in-transit vessels or next foreign port of arrival for outward vessels.
Port at which the vessel last loaded cargo prior to arriving in Canada (inward or in-transit vessel) (other than from the US) or foreign port where the vessel will first report after its departure from Canada (outward vessel).
M AN 5/5 United Nations Location Code (UNLOCODE) for the port the vessel last departed will be used for this element. See Appendix E, Table #8.
02 (373) Date The date of departure of the vessel. M DT 8/8 For inward and in-transit, the date the vessel has departed from the last foreign port of loading. For outward, the
Version 4010 154Conveyance
A6 CONVEYANCE Marine Vessel Report Mapping to ANSI 311 Canadian Customs InformationSegment ID Element Name Notes Attributes Codes
date the vessel departs Canada.
03 (316) Canadian Port of Arrival for inward and in-transit vessels / Canadian Port of Departure for outward vessel
Canadian Port at which vessel will first dock in Canada (inward and in-transit vessels) or, for outward vessels, the first Canadian Port of Departure where the vessel has last taken on cargo.
M AN 5/5 UNLOCODE for the Canadian port of arrival will be used for this element. See Appendix E, Table #8.
DTM Date/Time Reference To specify pertinent dates and times
For inward and in-transit, the Estimated Date and Time of Arrival is mandatory. For outward, the Actual Date and Time of Departure is mandatory.
Date of Registry is required for inward, in-transit and outward.
M 2/2
01 (374) Date/Time Reference Code specifying type of date or time, or both date and time.
M ID 3/3 370 - Actual date and time of Departure for outward vessel reporting
AA1 - Estimated date and time of Arrival for inward and in-transit vessel reporting 185 - Date of Registry for both outward and inward vessel reporting
02 Date (373) Date reference as per DTM 01 (370, AA1, 185). M DT 8/8
03 Time (337) This time is optional when reporting the Date of Registry of Vessel (185). This time is mandatory when reporting the actual date and time of departure for outward vessel reporting
O TM 4/8
Version 4010 155Conveyance
A6 CONVEYANCE Marine Vessel Report Mapping to ANSI 311 Canadian Customs InformationSegment ID Element Name Notes Attributes Codes
(370) and is also mandatory when reporting the estimated date and time of arrival for inward/in-transit reporting (AA1).
Loop ID – N1
This loop will be used a minimum of 3 times to identify the following:1. Shipping Line (SS)
If the arrival/departure is part of a liner service, then transmit the name of the shipping line - do not transmit non-liner services such as ferries, tugs, barges and other special services in this segment2. Ship's Agent (AG)Report the name of the ship's agent only where the agent is reporting the vessel under a carrier code assigned to another agent or carrier3. Ship's Owner (OV)4. Consortium Partners (CA)Report the name and carrier code of all the partners in the consortium. One loop for each partner
M 3/99
M
M
MO
N1 Name To identify a party by type of organization, name, and code
M 1/1
01 (98) Entity Identifier Code M ID 2/3 SS – Shipping LineAG – Ship’s AgentOV – Ship’s OwnerCA – Consortium Partners
02 (93) Name M AN 1/3503 (66) Identification Code
QualifierX ID 1/2 ZZ
04 (67) Identification Code Mandatory for consortium partners (CA) only X AN 4/4 Canada Customs Carrier Code
SYNTAX NOTES:
Version 4010 156Conveyance
A6 CONVEYANCE Marine Vessel Report Mapping to ANSI 311 Canadian Customs InformationSegment ID Element Name Notes Attributes Codes
03 P0304 – If either N103 or N104 is present, then the other is required.N3 Address Information To specify the location of the named party.
When N101 is SS, AG, or OV, then N3 is MANDATORY.
O 0/2
01 (166) Address Information M AN 1/3502 (166) Address Information Place telephone number in the N302 of the
first occurrence of the N3 segment.O AN 1/35
N4 Geographic Location To specify the geographic place of thenamed party.
When N101 is SS, AG, or OV, then N4 is MANDATORY.
O 0/1
01 (19) City Name Free-form text for city name M AN 2/30 02 (156) State or Province Code Code (Standard State/Province) as defined by
appropriate government agencyO ID 2/2 Province/State Codes – see
Appendix E, Table #9.
03 (116) Postal Code Code defining international postal zone code excluding punctuation and blanks (zip code for United States)
O ID 3/9
04 (26) Country Code M ID 2/3 Codes for Representation of Names of Countries, ISO 3166 – see Appendix E, Table #2.
END OF N1 LOOPR4 Port or Terminal Contractual or operational port or point
relevant to the movement of the cargo.Report up to ten ports of call (must have at least one port of call) that the vessel departed from on this voyage - ports are to be reported chronologically. All ports of call should be listed including the Canadian ports of call.
M 1/10
01 (115) Port or Terminal Code defining function performed at the port M ID 1/1 O – A default to indicate the
Version 4010 157Conveyance
A6 CONVEYANCE Marine Vessel Report Mapping to ANSI 311 Canadian Customs InformationSegment ID Element Name Notes Attributes Codes
Function Code or terminal with respect to a shipment ports of call function code.
04 (114) Port Name M ID 5/5 United Nations Location Code (UNLOCODE) – see Appendix E, Table #8.
06 (174) Terminal Name Free-form field for terminal name.
MANDATORY if R404 is a Canadian Port.
O AN 2/30
07 (113) Pier Number Identifying number for the pier O AN 1/4Loop Id -K1 Remarks To transmit information in a free-form format
for comment or special instructionUse K101 of the first occurrence of this segment to report Charter Type Code. The K102 of the first segment and all subsequent K1 segments will be used for comments/special instructions
O 0/5
01 (61) Free-Form Message Report whether the vessel is on charter
If on charter, identify the terms of the charter:
V - if the vessel is chartered by trip or voyageB - if the vessel has been chartered without crew T - if the vessel has been chartered on a time basis (by day, week, etc.)
O AN 1/30 N - not on charterV - voyageT - timeB - bare boatBV - bare boat/voyage BT - bare boat/timeBTV - bare boat/time/voyageBVT - bare boat/voyage/timeVT – charter/voyage/time
02 (61) Free-Form Message Free-form information. Report if the vessel is involved in a specialized operation such as drilling, dredging, ice breaking, oceanography or cartography. In the case of tug/barge operations, indicate the number of barges pulled. For a tug pulling one or more barges, report the name, nationality and gross register
O AN 1/30
Version 4010 158Conveyance
A6 CONVEYANCE Marine Vessel Report Mapping to ANSI 311 Canadian Customs InformationSegment ID Element Name Notes Attributes Codes
tons of each barge. If a separate form A6 is transmitted for each barge, it is not necessary to provide the information on name, nationality and gross register tons of each barge. Another use of this element is to indicate a consortium or co-load.
Loop ID – LX M 1/999
LX Assigned Number To reference a line number in a transactionSet
MANDATORY if containerized.01 (554) Assigned Number M N0 1/6
Loop ID –LX/Y2Y2 Container Details To specify container information and
transportation service to be used
MANDATORY if containerized.
O 0/10
01 (95) Number of Containers Number of shipping containers M N0 1/4 04 (24) Equipment Type Code identifying equipment type M ID 4/4 20L- 20 foot loaded
20E- 20 foot empty40L- 40 foot loaded40E- 40 foot emptyOTL- other, loadedOTE- other, empty
END OF LX LOOPSE Transaction Set Trailer To indicate the end of the transaction set
and provide the count of the transmittedsegments (including the beginning (ST) andending (SE) segments)
M 1/1
01 (96) Number of Included Segments
Total number of segments included in a transaction set including ST and SE segments
M N0 1/10
02 (329) Transaction Set Control Identifying control number that must be M AN 4/9
Version 4010 159Conveyance
A6 CONVEYANCE Marine Vessel Report Mapping to ANSI 311 Canadian Customs InformationSegment ID Element Name Notes Attributes Codes
Number unique within the transaction set functional group assigned by the originator for a transaction set
Version 4010 160Conveyance
SEGMENT PURPOSE DIAGRAM CONVEYANCEPurpose: This transaction set is used by ocean carriers and freight forwarders to communicate cargo, conveyance and supplementary information to Canadian Customs for both import and export movements.
ST TRANSACTION SETS
Purpose: To indicate the start of a transaction set and to assign a control number.
ST
ST01 143
Transaction Set ID CD
M ID 03/03
*
ST02 329
Trans. Set Control Number M AN 04/09
NL
B2A SET PURPOSE
Purpose: To allow for positive identification of transaction set purpose.
B2A
B2A01 353
Transaction Set Purpose Code
M ID 02/02
*
B2A02 346
Application Type
M ID 02/02
NL
N9 REFERENCE IDENTIFICATION Purpose: To transmit identifying information as specified by the reference identification
qualifier. This segment will be repeated a minimum of 7 times.
N9
N901 128
Reference Identification Qualifier
M ID 02/03
*
N902 127
ReferenceIdentification R0203
M AN 01/35
* *
N904 373
Date
M DT 08/08
NL
Version 4010 161Conveyance
V1 VESSEL INFORMATION
Purpose: To provide vessel details and voyage number.
V1
V101 597
Vessel Code
M ID 01/08
*
V102 182
VesselName R0102
M AN 02/28
*
V103 26
Vessel Country Code
M ID 02/02
*
V104 55
Flt/Voyage Number
M AN 02/10
* * *
V107 854
Vessel Type Code
M ID 2/02
NL
V2 VESSEL INFORMATIONPurpose: To provide vessel details.
V2
V201 310
Location Identifier
M AN 01/30
*
V202 127
Reference Identification
M AN 01/30
*
V203 81
WeightP0304
M R 01/10
*
V204 188
Weight Unit Code
M ID 01/01
*
V205 81
WeightP0506
M R 01/10
*
V206 188
Weight Unit Code
M ID 01/01
*
V207 81
WeightP0708
M R 01/10
V208 188
Weight Unit Code
M ID 01/01
*
V209 81
WeightP0910
M R 01/10
*
V2010 188
Weight Unit Code
M ID 01/01
*
V2011 81
WeightP1112
M R 01/10
*
V2012 188
Weight Unit Code
M ID 01/01
*
V2013 93
Name
M AN 01/35
*
V2014 82
Length
M R 01/08
*
V2015 355
Unit or Basis for Measurement Code
M ID 02/02
*
V2016 380
Quantity
M R 01/04
*
V2017 380
Quantity
M R 01/04
NL
Version 4010 162Conveyance
V3 VESSEL SCHEDULE
Purpose: To transmit vessel scheduling information.
V3
V301 318
Last Port of Loading
M AN 05/05
*
V302 373
Date of Departure of the Vessel
M DT 08/08
*
V303 316
Port of Arrival
M AN 05/05
NL
DTM DATE/TIME REFERENCE
Purpose: To specify pertinent dates and times. Vessel Registration Date is Mandatory if reporting Inward, In-transit and Outward.
DTM
DTM01 374
Date/TimeQualifier
M ID 03/03
*
DTM02 373
Date R0203
M DT 08/08
*
DTM03 337
Time R0203
O TM 04/08
NL
N1 NAME
Purpose: To identify a party by type of organization, name and code. This loop will be used a minimum of 3 times.
N1
N101 98
Entity ID Code
M ID 02/03
*
N102 93
Name R0203
M AN 01/35
*
N103 66 Identification Code Qualifier
X ID 01/02
*
N104 67
Identification Code
X AN 04/04
NL
Version 4010 163Conveyance
N3 ADDRESS INFORMATION
Purpose: To specify the location of the named party.
N3
N301 166
Address
M AN 01/35
*
N302 166
Address
O AN 01/35
NL
N4 GEOGRAPHIC LOCATION
Purpose: To specify the geographic place of the named party.
N4
N401 19
City Name R0105
M AN 02/30
*
N402 156
State/Prov. Code C0102
O ID 02/02
*
N403 116
Postal or ZIP Code
O ID 03/09
*
N404 26
Country Code
M ID 02/03
NL
R4 PORT OR TERMINAL
Purpose: Contractual or operational port or point relevant to the movement of the cargo. Report up to ten ports of call using this segment.
R4
R401 115
Port Function Code
M ID 01/01
* * *
R404 114
Port Name
M ID 05/05
* *
R406 174
Terminal Name
O AN 02/30
*
R407 113
Pier Number
O AN 01/04
NL
Version 4010 164Conveyance
K1 REMARKS
Purpose: To transmit information in a free-form format, if necessary, for comment or special instruction.
K1
K101 61
Free Form Message
O AN 01/30
*
K102 61
Free Form Message
O AN 01/30
NL
LX ASSIGNED NUMBER
Purpose: To reference a line number in a transaction set.
LX
LX01 554
Assigned Number
M NO 01/06
NL
Y2 CONTAINER DETAILS
Purpose: To specify container information and transportation service to be used.
Y2
Y201 95
Number of Containers
M N0 01/04
*
Y204 24
Equipment Type
M ID 04/04
NL
SE TRANSACTION SET TRAILER
Purpose: To indicate the end of the transaction set and provide the count of the transmitted segments including the beginning ST and ending SE segments.
SE
SE01 96
Number of Included Segments
M N0 01/10
*
SE02 329
Transaction Set Control No.
M AN 04/09
NL
Version 4010 165Conveyance
A6 Conveyance - Looping Diagram
Version 4010 166Conveyance
Seg.ID Name M/O Max. Use Loop ReferenceST Transaction Set Header M 1B2A Set Purpose M 1N9 Reference Number M 99V1 Vessel Identification M 1V2 Vessel Information M 1V3 Vessel Schedule M 1DTM Date/Time Reference M 2N1 Name M 1 N3 / 10N3 Address Information O 2N4 Geographic Location O 1R4 Port M 10K1 Remarks O 5LX Assigned Number O 1 LX / 999Y2 Container Details O 1SE Transaction Set Trailer M 1
SAMPLEA6 INWARD CONVEYANCE
A container vessel begins its voyage in Haifa, Israel, with subsequent ports of call being Piraeus, Greece; Livorno, Italy; Le Havre, France; Cadiz, Spain; Barcelona, Spain. The first Canadian port of call is Montreal, Quebec. The vessel will then travel to St. John, New Brunswick, Canada, and then on to Halifax, Nova Scotia, Canada.
ISA*00* *01* *ZZ*KIMHFX *ZZ*RCCECECPP *030922*0830*U*00401*000036995*1*P*>GS*SO*9888*A6*20030922*1930*56789*X*004010ST*311*123798B2A*00*21N9*BI*9888N9*MA*CEACICONV1N9*Z1*0**20101231N9*Z2*0**20101231N9*Z3*0**20101231N9*Z4*0**20101231N9*Z5*0**20101231V1*5256811*VESSEL NAME*IL*21W***CTV2*IL*9000001*16350*E*41500*E*6076190*E*0*E*39000*E*JOHN CRAWFORD*254*MR*19*0V3*ESBCN*20030911*CAMTRDTM*AA1*20030918*0800DTM*185*19981031N1*SS*SHIPPING LINE NAMEN3*495 RUE LAURIER*5145551212N4*MONTREAL*QC*J3J2N7*CAN1*AG*SHIP AGENT NAMEN3*495 RUE LAURIERN4*MONTREAL*QC*J3J2N7*CAN1*OV*SHIP OWNER NAMEN3*495 RUE LAURIERN4*MONTREAL*QC*J3J2N7*CAR4*O***ILHFAR4*O***GRPIRR4*O***ITLIVR4*O***FRLEHR4*O***ESCADR4*O***ESBCNR4*O***CAMTR**TERMINAL NAME*29R4*O***CASJB**TERMINAL NAME**12R4*O***CAHAL**TERMINAL NAME**27LX*1Y2*174***20L-LX*2Y2*166***40L-SE*37*123798GE*1*56789IEA*1*000036995
Version 4010 167Conveyance
SAMPLEA6 OUTWARD CONVEYANCE
A container vessel loads cargo and begins its voyage in Halifax, Nova Scotia, Canada. Subsequent ports of call for the vessel will be Newark, New Jersey, US; Miami, Florida, US; Long Beach, California, US; Washington, Seattle, US; and Vancouver, Canada.
ISA*00* *01* *ZZ*KIMHFX *ZZ*RCCECECPP *030922*0830*U*00401*000113176*1*P*>GS*SO*9977*A6*20030922*1930*12345*X*004010ST*311*899566B2A*00*22N9*BI*9977N9*MA*CEOUTCONV5N9*Z1*0**20101231N9*Z2*0**20101231N9*Z3*0**20101231N9*Z4*0**20101231N9*Z5*0**20101231V1*6956811*VESSEL NAME*IL*25W***CTV2*IL*9001301*15850*E*41000*E*4069950*E*0*E*38950*E*JOE SAMPSON*250*MR*18*0V3*USNEK*20030922*CAHALDTM*370*20030922*2100DTM*185*19981031N1*SS*SHIPPING LINE NAMEN3*495 WATER STREET*9025551212N4*HALIFAX*NS*B3J 2N7*CAN1*AG*SHIP AGENT NAMEN3*495 WATER STREETN4*HALIFAX*NS*B3J 2N7*CAN1*OV*SHIP OWNER NAMEN3*495 WATER STREETN4*HALIFAX*NS*B3J 2N7*CAR4*O***CAHAL*TERMINAL**27R4*O***USNEKR4*O***USMIAR4*O***USLGBR4*O***USWABR4*O***CAVAN**TERMINAL NAME*15LX*1Y2*96***20L-LX*2Y2*144***40L-SE*34*899566GE*1*12345IEA*1*000113176
Version 4010 168Conveyance
APPENDIX D – DATA ELEMENT DEFINITIONS
Cargo Reports – A6AThe cargo report will be used to report cargo that is considered to be goods imported into Canada, in-transit to the U.S., exports or Freight Remaining on Board (FROB). As well this format will be used to report supplementary cargo and empty containers in international shuttle service.
The application
receiver’s code will be used to identify whether the report is an A6A, supplementary cargo or a report on empty containers in international shuttle service.
The following are the valid codes:
A6A – Cargo Report
S10 – Supplementary Report
E10 – Empty Container Report
B2A – Set Purpose M 1/1
B2A01 – Transaction Set Purpose Code M 2/2 ID
Transmit a code to indicate if the transmission is an original transmission (00), an amendment to an original (04), or a deletion (03).
B2A02 – Application Type M 2/2 ID
Indicate whether the report is associated to cargo being imported into Canada for domestic consumption (24), in-transit to the U.S. by any mode of transportation (23) or cargo on board a vessel that is not being discharged at a Canadian port (FROB) (26).
N9 – Reference Identification M 4 or 5/99
This segment is used to indicate the identifiers related to the specific report. In some cases, a combination of the elements within this segment will be combined and used.
For example, the elements for Carrier Code (BI), Report Number (MA) and Bill of Lading (OB) will be used to create a marine Cargo Control Number (CCN). The CCN will be the reference number that will be used to identify the specific marine shipment and will be reflected in notices/acknowledgements. In addition, the CCN will be used in the submission of a supplementary cargo report to reference a marine CCN.
ÓCCRA, 2003 170
GS03 – Application Receiver’s Code M 2/15 AN
N901 – Reference Identification Qualifier M 2/3 ID
BI – Carrier Code, MA – Report Number, OB – Bill of Lading, AAO – Carrier Assigned Code plus MA, 6A – Supplementary Reference Number, ZZ – Supplementary Data Required Indicator, 7T – Associated Transportation Document Number, XP – Previous Cargo Control Number, CI – Unique Consignment Reference Number, V0 – Version.
N902 - BI – Carrier Code M 1/35 AN
Four-digit code, issued by the CCRA, for the carrier that is submitting the report.
The cargo and empty container reports must contain the carrier code of the marine carrier who is submitting the report.
N902 - MA – Report Number M 1/35 AN
A non-duplicating number, assigned by carriers, that serves to uniquely identify the voyage/trip. An “E” in the first position of the number indicates an EDI transmission. A “CE” in the first and second positions of the number indicates an EDI transmission and the cargo is on a voyage with consortium partners.
N902 - OB – Bill of Lading M 1/35 AN
This is the number of the ocean bill of lading for cargo and empty container.
N902 - AAO – Conveyance Reference Number M 1/35 AN
In the transmission of cargo and empty container reports, the Conveyance Reference Number (CRN) must also be transmitted. This number is formed by the vessel carrier code and the report number issued by the vessel carrier (number uniquely identifying a voyage/trip). This number will be used to relate the cargo report(s) and the conveyance report.
N902 - 6A – Supplementary Reference Number
M 1/35 AN
This is the reference number that has been issued for a specific supplementary report. This should not be a housebill number. It should be noted that the carrier code of the supplementary and the unique reference number should be transmitted in this element.
In the transmission of a supplementary report, a supplementary number and the marine cargo report number (CCN) that it is related to must be completed. Therefore, the following reference numbers must also be transmitted N9 BI, N9 MA, N9 OB.
ÓCCRA, 2003 171
N902 - ZZ – Supplementary Data Required Indicator
M 1/35 AN
A “Y” or “N” indicator on the prime manifest indicating whether or not a supplementary cargo report(s) will be transmitted by an authorized agent.
N902 - 7T – Associated Transportation Document Number
O 1/35 AN
This element will be used in the reporting of exported cargo. This number is to indicate the export shipment transaction number(s) that was (were) used to authorize the exportation of the goods. The export shipment transaction number may consist of one or more of the following reference numbers: B13A, CAED, Summary Report. “NDR” (No Document Required) must be transmitted in the case where the export did not require an export document.
The N9 segment can be repeated a maximum of 99 times to allow for multiple Associated Transportation Document Numbers (7Ts).
It should be noted that the export shipment transaction number must be transmitted unless a Previous Cargo Control Number has been submitted indicating that the goods were transported through another cargo movement and are in-transit through Canada.
N902 - XP – Previous Cargo Control Number O 1/35 AN
The Previous Cargo Control Number is the reference number required where the goods are being reported as an export and a previous movement of the goods was undertaken as they were in-transit through Canada by another carrier.
The N9 segment can be repeated a maximum of 99 times to allow for multiple Previous Cargo Control Numbers (XPs).
N902 - CI – Unique Consignment Reference Number
O 1/35 AN
This reference number element has been reserved for future use (when international code is developed), and can transmitted if available.
N902 - V0 – Version O 1/35 AN
This element is for versioning control. Data in this element is returned in the REF02 of the corresponding Application Advice (824).
V1 – Vessel Identification M 1/1
This is mandatory for cargo and empty containers reports and not required for supplementary reports.
ÓCCRA, 2003 172
V102 – Vessel Name M 2/28 AN
The name of the vessel as documented in Lloyd's Register of Ships that the cargo will be loaded onto or ship's radio call sign.
V104 – Flight/Voyage Number M 2/10 AN
The identifying designator for the particular flight or voyage on which the cargo travels.
V3 – Vessel Schedule M 1/1
This is mandatory for cargo and empty container reports and not required for supplementary cargo reports.
V301 – Current Port of Loading M 5/5 AN
This element will have two uses. For cargo reports excluding export reports, this element will be the Foreign Port where the goods are being loaded onto the vessel. For export reports, this element will be the Canadian port where the goods are being loaded onto the conveyance. This element will be in the UNLOCODE format.
V303 – Port of Arrival/Port of Destination M 5/5 AN
This element will have two uses. For cargo reports excluding export reports, this element will be the Canadian seaport of discharge for the specific cargo.
For export reports, this element will be the foreign port where the goods are going to be discharged on foreign soil.
This element will be in the UNLOCODE format.
DTM – Date/Time Reference O 3/3
This segment will be used to identify date and time for a multiple of date requirements.
139 – Estimated Date and Time of Loading
This element indicates the date and time of the loading of the cargo on the vessel. Mandatory when the cargo report (excluding exports) has been transmitted with the Supplementary Data Required indicator equalling “Y”.
370 – Actual Date and Time of Departure
Mandatory for export cargo reports.
DTM02 – Date O 8/8 DT
The date should be in the format CCYYMMDD.
DTM03 – Time O 4/8 TMÓCCRA, 2003 173
The time should be reflected in Eastern Standard Time (HHMM)
N1 – Parties M 2/10
This segment must be used to identify the parties involved in the shipment of the goods for a specific cargo report. This segment will be mandatory for all reports excluding empty containers.
N101 – Entity Identifier Code M 2/3 ID
There are different types of parties that may be identified in this segment:
Shipper (SH) = The party which, by contract with a carrier, consigns or sends goods with the carrier, or has them conveyed;
Consignee (CN) = The party to which the goods are consigned;
Notify Party (NP) = The party(ies) to be notified upon arrival of the shipment in Canada;
Delivery Address (AE) = Place where the goods are to be delivered. Delivery address must be used where the delivery address of the goods is different than the consignee address.
N102 – Name M 1/35 AN
This is the business name of the party.
N2 – Additional Name Information O 0/1
N201 and 02 – Name O 1/35 AN
This is a contact name for the party. This element is mandatory if a delivery address is being submitted.
N3 – Address Information M 1/2
N301 – Address Information M 1/35 AN
This is the address information of the party.
N302 – Address Information O 1/35 AN
The first occurrence of this element should contain a phone number of the party.
ÓCCRA, 2003 174
N4 – Geographical Location M 1/1
The elements in the N4 segment must be completed to specify the geographic place of the named party.
N401 – City Name M 2/30 AN
Free-form text for the city name.
N402 – State or Province Code O 2/2 ID
This element is mandatory if the N404 Country Code is CA or US.
N403 – Postal Code O 3/9 ID
Postal code, or zip code for United States addresses.
If postal code is Canadian, it must be transmitted in one of the following formats: ANA NAN, ANANAN, ANA-NAN.
N404 – Country Code M 2/3 ID
ISO 3166 Codes for Representation of Countries, Appendix E, Table #2 should be used.
R4 – Port or Terminal M 2/10
This segment is mandatory. Examples have been provided in the sample EDI transmissions in Appendix C.
R401 – Port or Terminal Function Code
R = Place of Receipt – The location where the goods are to be received by the carrier as per contractual agreement. Mandatory for cargo and empty containers reports but not required for supplementary reports.
3 = Customs Office of Manifest Origin – The Canadian Customs office code where the cargo will be reported upon the arrival of the goods. This should be a seaport. Mandatory for cargo and empty containers reports identified as import and/or in-transit cargo.
Not required for supplementary cargo reports nor FROB. It should be noted that for export cargo reports, this office code would indicate the Canadian Customs office code where the goods will depart/exit Canada on the conveyance. See next.
3 = Port of Exit – Used for export to indicate the Canadian Customs office code where the cargo will be reported upon its export from Canada on a marine conveyance.
4 = Customs Office of Manifest Destination – The Canadian Customs office code where the cargo will be destined upon the arrival of the goods. Mandatory for cargo and empty containers reports identified as imports and in-transits.
Not required for supplementary cargo reports, cargo identified as FROB nor for exports.ÓCCRA, 2003 175
E = Place of Delivery – The location where the goods are to be delivered by the carrier/freight forwarder as per contractual agreement. Mandatory for cargo reports, empty container reports, and supplementary cargo reports. For export cargo, see next.
E = Place of Destination – Used for exports to indicate the location where the goods are to be delivered as per contractual agreement.
T = Sub-location code for the Customs Office of Manifest Origin – The Canadian customs office code for the warehouse associated to the customs office where the goods will be reported upon their arrival into Canada. Optional and conditional upon the Customs Office of Manifest Origin requirements.
T = Sublocation code for the Port of Exit – The Canadian customs office code for the warehouse associated to the Customs office where the goods will be reported upon their export from Canada. Optional and conditional upon the Port of Exit requirements.
M = Sub-location code for the Customs Office of Manifest Destination – The Canadian customs office code for the warehouse associated to the customs office where the goods are destined upon their arrival into Canada. Optional and conditional upon the Customs Office of Manifest of Destination requirements.
R402 – Location Qualifier X 1/2 ID
This identifies what type of location will be provided, i.e., CD - Canadian Customs Office code, CI - city or SC - city/state and points within. If R403 is completed, then this element is mandatory.
R403 – Location Identifier X 1/25 AN
Where the function code is 3 or 4, this identifier will be the Canadian Customs Office Code found in Appendix E, Table #1. When the function code is T or M, this identifier will be the Canadian Customs Sublocation Code found in Appendix E, Table #4.
Where the function code is E or R, this identifier will be the name of the location where the goods have either been received or delivered.
If R402 is completed, then this element is mandatory.
R404 – Port Name O 2/24 AN
This element is mandatory when the function code is E or R.
The port name where the goods were received or delivered.
R405 – Country Code O 2/3 ID
This element is mandatory when the function code is E or R.
The country code as per ISO Country Code Appendix E, Table #2.
R406 – Terminal Name O 2/30 AN
ÓCCRA, 2003 176
The terminal name where the goods will be offloaded at the Canadian Customs Office of Manifest Origin (3). Mandatory when the function code is 3.
For exports, the terminal name where the goods will be loaded at the port of exit.
R407 – Pier O 1/4 AN
The pier number where the goods will be offloaded at the Canadian Customs Office of Manifest Origin (3). This element is optional when the function code is 3.
For exports, the pier number where the goods will be loaded at the port of exit.
LX – Assigned Number M 1/1
This segment can be looped a maximum of 999 times. The CCRA will only accept one Y2 and one ED segment per LX.
LX01 – Assigned Number M 1/6 NO
A sequential assigned number to differentiate a grouping within the LX segment. The segments included in the LX are Y2, ED, M7, L0 and L5. The submission of these segments is critical to the proper relationship between the container, the quantity/weight, and the goods description.
For an example of this sequence, please refer to the sample EDI transmissions in Appendix C.
Y2 – Container Details O 0/1
The CCRA will only accept one Y2 per LX segment.
This segment is mandatory where the cargo is containerized.
Y203 – Type of Service M 2/2 ID
Submit the most appropriate code associated to the transportation service to be used.
Y204 – Equipment Type Code M 4/4 ID
This element will be a combination of two code tables. The first two digits will be the equipment/container size found in Appendix E, Table #5. The last two digits will be the equipment/container type found in Appendix E, Table #6.
ED- Equipment Description O 0/1
The CCRA will only be one ED per LX segment.
This segment is mandatory where the cargo is containerized.
ED01 – Equipment Initial M 1/4 AN
ÓCCRA, 2003 177
The prefix or alphabetic part of an equipment unit’s identifying number.
ED02 – Equipment Number M 1/10 AN
In conjunction with the equipment initial, the sequencing or serial part of an equipment unit’s identifying number. The check digit must also be included in this field.
ED03 – Load/Empty Status Code M 1/1 ID
A code (L-loaded or E-empty), that specifies the loaded condition of the equipment.
M7 – Seal Numbers O 2/15 AN
A unique number on a seal affixed to the equipment. Do not report “No Seal”.
L0 – Quantity and Weight of the Goods M 1/1
This segment is mandatory except for empty container reports. It specifies the quantity, weight and volume related to goods. It should be noted that this segment and the L5 cargo description segment must be submitted as they related to each other. For example, if the L0 submitted is for 100 boxes with a weight of 500 kilograms the L5 would contain the cargo description. If there were multiple types of packaging for different descriptions of goods then another L0 and L5 would be submitted within the same LX.
L001 – Loading Line Number M 1/3 NO
The sequential line number for a loading item. This number must be unique within the transaction set. This number will be used where multiple occurrence of the L0 segment are required in order to identify various quantity and weight for specified goods.
L004 – Weight M 1/10 R
This number identifies the weight of the cargo for a certain packaging of the goods. If containerized goods are being reported, this element is mandatory.
L005 – Weight Qualifier M I/2 ID
This will always be coded as “G” to for the gross weight of the goods.
L006 – Volume X 1/8 R
This number identifies the volumetric measurement of the cargo. If containerized goods are being reported, this element is mandatory. If L007 is completed, then is element is mandatory.
L007 – Volume Unit Qualifier X 1/1 ID
ÓCCRA, 2003 178
A code to identify the unit of measure for the volume of the cargo.
If L006 is completed, then is element is mandatory.
L008 – Lading Quantity M 1/7 NO
The number of pieces for a certain packaging form of the lading commodity. For example, 10 boxes.
L009 – Packaging Form Code M 3/3 ID
This code identifying the packaging form of the lading quantity (e.g. BOX for boxes).
L011 – Weight Unit Code M 1/1 ID
This code identifies the Unit of Measure (UOM) for the gross weight of the cargo.
L5 – Description, Marks and Numbers M 1/999
This segment is mandatory except for empty container reports. It specifies, the goods description, marks and numbers, dangerous goods codes, and commodity codes for a given quantity of goods as submitted in the L0.
The L5 segment can be used where there are multiple descriptions for one quantity of goods. For example, if the L0 indicates 10 boxes and the goods contained therein are of various descriptions, such as shoes and boots, then one L5 segment should be transmitted for shoes, and another L5 segment for the boots.
L501 – Lading Line Item Number O 1/3 NO
A sequential line number for a lading item. This number must be unique within the transaction set. This number will be used where multiple occurrence are required in order to differentiate specified goods within a specific line number indicated in the L0.
L502 – Lading Description M 1/50 AN
A clear and concise cargo description must be submitted. The description should be in line with what it is typically found on shipping invoices, bills of lading or other such transportation documents. Freight of All Kinds (FAK); Shippers Load and Count; Said to Contain are NOT acceptable descriptions. In addition, this description should not contain any reference to the quantity or packaging of the goods as it is contained in the L0, nor any disclaimer or special instruction information as the K1 segment should be used for this information. Also, the commodity code must be transmitted in the L5 03 not the L5 02.
Descriptions that do not follow the above instructions may result in the authorization to load the cargo or container not being granted or being delayed.
ÓCCRA, 2003 179
L503 – Commodity Code X 2/10 AN
This is the code number of the goods listed in L502 in accordance with the tariff nomenclature system of classification in use where the customs declaration is made. The code transmitted must be at least at the two-digit level.
If L503 is completed, then L504 is mandatory.
L504 – Commodity Code Qualifier O 1/1 ID
This element is required when a commodity code is submitted. The default value is “H” to represent the Brussels Nomenclature code.
If L504 is completed, then L503 is mandatory.
L506 – Marks and Numbers O 1/48 AN
This element identifies a shipment or parts of a shipment as well as to indicate whether those goods are considered to be Dangerous Goods.
Where UN Dangerous Goods Codes are being transmitted, the L507 Marks and Number Qualifier must be completed with a “ZZ” code.
Where additional marks and numbers require additional lines or when there are multiple UN Dangerous Goods codes, additional L5 segments can be submitted in conjunction with the L0 segment. When multiple L5 segments are submitted the Loading Description element may be left blank.
Do not report “No Marks”.
L507 – Marks and Numbers Qualifier O 2/2 ID
Where UN Dangerous Goods codes are being submitted, the L507 Marks and Number Qualifier must be completed with a “ZZ” code.
If L507 is completed, then L506 is mandatory.
K1 Remarks O 0/2
K101 Free-Form Message M 1/30 AN
K102 Free-Form Message O 1/30 AN
K101 and K102 are to be submitted where there are special instructions regarding the handling of the goods. The phrase “no marks” should not be used in this segment.
ÓCCRA, 2003 180
Conveyance Reports – A6The conveyance report (A6) will be used to declare a conveyance report when the conveyance is to arrive in Canada (inward-import), to depart Canada (outward-export), or is in-transit, stopping in Canada on the way to another country.
For inwards and in-transit reports, the vessel carrier will be responsible for the submission of the A6. Therefore, the consortium carriers are not required to submit individual A6’s. However, for the reporting of exports, the consortium carrier may submit individual reports.
GS03 – Application Receiver’s Code M 2/15 AN
The application receiver’s code will be used to identify the report as an A6.
B2A01 – Transaction Set Purpose Code M 2/2 ID
Transmit a code to indicate if the transmission is an original transmission (00), an amendment to an original (04), or a deletion (03).
B2A02 – Application Type M 2/2 ID
Transmit a code to indicate whether the report is associated to the conveyance that is arriving into Canada as an inward-import (21), departing Canada as an outward-export (22), or a stop in Canada on its way to another country as an in-transit (23).
N9 – Reference Identification M 9/99
This segment is used to indicate the identifiers related to a specific report. In some cases, a combination of the elements within this segment will be used as reference numbers.
For example, the elements for Carrier Code (BI) and Report Number (MA) will be used as the Conveyance Reference Number (CRN) that will serve as the link between the cargo and empty container reports, and the conveyance. Therefore, the CRN will be used on cargo and empty container reports submitted by the carrier and/or consortium carriers.
N901 – Reference Identification Qualifier M 2/3 ID
BI – Carrier Code, MA – Report Number, OB – Bill of Lading, Z1 - safety of ship; Z2 - safety radio; Z3 - safety equipment; Z4 - load line; Z5 - derat; Z6 - Maritime declaration of Health; Z7 - civil liability of oil, V0 – Version.
ÓCCRA, 2003 181
B2A – Set Purpose M 1/1
N902 - BI – Carrier Code M 1/35 AN
Four-digit code issued by the CCRA for the carrier that is submitting the report.
N902 - MA – Report Number M 1/35 AN
A non-duplicating number, assigned by carriers that serves to uniquely identify the voyage/trip. A “C” in the number indicates the vessel is in consortium with other carrier or agents - an “E” in the first position of the number indicates an EDI transmission – a “CE” in the first and second positions of the number indicates an EDI transmission and the cargo is on a voyage with consortium partners.
N902 - N9 Z1- Z7 – Certificates M 1/35 AN
If available, provide the document number, otherwise populate field with a zero to meet ANSI mandatory field requirement. for the following certificates: Z1 safety of ship; Z2 safety radio; Z3 safety equipment; Z4 load line; Z5 derat; Z6 Maritime declaration of Health; Z7 civil liability of oil.
N902 - V0 – Version Number M 1/35 AN
This element is for versioning control. Data in this element is returned in the REF02 of the corresponding Application Advice (824).
N904 – Date M 8/8 DT
Transmit the expiry dates for the following certificates: Z1 safety of ship; Z2 safety radio; Z3 safety equipment; Z4 load line; Z5 derat; Z6 Maritime declaration of Health; Z7 civil liability of oil. Transit in CCYYMMDD format.
V1 – Vessel Identification M 1/1
This segment provides vessel details and voyage number.
V101 – Vessel Code M 1/8 ID
The number of the vessel issued by the Lloyd’s Register of Ships or the ship’s radio call sign.
V102 – Vessel Name M 2/28 AN
The name of the vessel as documented in the Lloyd’s Register of Ships.
ÓCCRA, 2003 182
V103 – Country Code M 2/2 ID
The code identifying the country in which the vessel is registered. Country codes can be found in Appendix E, Table #2.
V104 – Flight/Voyage Number M 2/10 AN
The identifying designator for the particular flight or voyage on which the cargo travels. This number should be unique.
V107 – Vessel Type Code M 2/2 ID
This code is to identify the type of vessel as indicated at time of licensing. If there are multiple codes that apply, indicate the most applicable.
V2 – Vessel Information M 1/1
V201 – Location Identifier M 1/30 AN
This is to indicate the place of vessel registry.
V202 – Reference Identification M 1/30 AN
This is to indicate the registry number of the vessel.
V203 – Weight M 1/10 R
Transmit the vessel net registry tonnage. Net registry tonnage refers to the useful capacity of a ship determined in accordance with the International Convention on Tonnage of Ships, 1969.
V204 – Weight Unit Code M 1/1 ID
Transmit a code identifying the UOM for the vessel net registry tonnage.
V205 – Weight M 1/10 R
Transmit the vessel gross registry tonnage. Gross register tonnage is the measure of the overall size of a ship determined in accordance with the International Convention on Tonnage of Ships, 1969.
V206 – Weight Unit Code M 1/1 ID
Transmit a code identifying the UOM for the vessel gross registry tonnage.
V207 – Weight M 1/10 RÓCCRA, 2003 183
Transmit the vessel containerized cargo tonnage.
V208 – Weight Unit Code M 1/1 ID
Transmit a code identifying the UOM for the vessel containerized cargo tonnage.
V209 – Weight M 1/10 R
Transmit the vessel non-containerized cargo tonnage.
V210 – Weight Unit Code M 1/1 ID
Transmit a code identifying the UOM for the vessel non-containerized cargo tonnage.
V211 – Weight M 1/10 R
Transmit the vessel summer dead weight tonnage. Summer dead weight tonnage refers to the weight in metric tons of cargo stores, fuel, passengers and crew carried by a ship when loaded to its maximum summer load line.
V212 – Weight Unit Code M 1/1 ID
V213 – Name M 1/35 AN
Transmit the name (first name last name) of the master (captain) of the vessel.
V214 – Length M 1/8 R
Transmit the vessel length.
V215 – Unit Code M 2/2 ID
Transmit a code identifying the UOM for the vessel length.
V216 – Quantity M 1/4 R
Transmit the crew quantity including the master.
V217 – Quantity M 1/4 R
Transmit the passenger count excluding the crew and master.
ÓCCRA, 2003 184
V3 – Vessel Schedule M 1/1
V301 – Last Foreign Port of Loading/Next Foreign Port of Arrival
M 5/5 AN
This element will be in the UNLOCODE format.
This element will have two uses. For inward and in-transit reports, this element will be the foreign port (other than the United States) where the vessel last loaded cargo prior to arriving in Canada.
For outward reports, this element will be the foreign port where the vessel will first report after its departure from Canada.
V302 – Date M 8/8 DT
For inward and in-transit reports this is the departure date of the vessel from the foreign port, other than the United States, at which the vessel last departed prior to arriving in Canada.
For outward reports this is the date the vessel departs Canada.
V303 – Canadian Port of Arrival/Canadian Port of Departure
M 5/5 AN
This element will be in the UNLOCODE format.
This element will have two uses. For inward and in-transit reports, this element will be the Canadian port of arrival where the vessel first docks. This may be different than the port where the goods will be offloaded from the conveyance.
For outward reports, this element will be the first Canadian port of departure where the vessel has taken on cargo.
DTM – Date/Time Reference M 2/2
This segment will be used to identify date and time for several requirements. The date and time should be reflected in Eastern Standard Time.
370 – Actual Date and Time of Departure
Date and time are mandatory for outward vessel reporting.
AA1 – Estimated Date and Time of Arrival
Mandatory for inward and in-transit reports. This date and time will indicate the estimated date and time that the vessel will arrive in Canada and should be updated as required.
185 – Date and Time of RegistryMandatory for both inward and outward vessel reporting. This should be the date and time that the vessel was registered. It should be noted that the time of registry is optional.
DTM02 – Date M 8/8 DTÓCCRA, 2003 185
The date should be in the format CCYYMMDD.
DTM03 – Time O 4/8 TM
The time should be reflected in Eastern Standard Time.
N1 – Parties M 3/99
This segment must be used to identify the parties involved in the particular voyage.
N101 – Entity Identifier Code M 2/3 ID
There are different types of parties that may be identified in this segment. They are the shipping line (SS), Ship’s Agent (AG), Ship’s Owner (OV), and Consortium Partners (CA).
N102 – Name M 1/35 AN
This is the business name of the party.
N103 – Identification Code Qualifier X 1/2 ID
This element is required when reporting consortium carrier (N101 entity identifier code =CA) and should be reported as ZZ. If N104 is completed, then N103 is mandatory.
N104 – Identification Code X 4/4 AN
This element lists the consortium carrier code(s) included in this particular voyage. It is mandatory when N103 is reported. If N103 is completed, then N104 is mandatory.
N3 – Address Information M 1/2
N301 – Address Information M 1/35 AN
This is the address information of the party.
N302 – Address Information O 1/35 AN
The first occurrence of this element should contain a phone number of the party.
N4 – Geographical Location O 0/1
The elements in the N4 segment must be completed to specify the geographic place of the named party.
ÓCCRA, 2003 186
It should be noted that if the Country Code is Canada or the U.S. then the province/state code element is mandatory.
N401 – City Name M 2/30 AN
Free-form text for the city name.
N402 – State or Province Code O 2/2 ID
This element is mandatory if the N404 Country Code is CA or US.
N403 – Postal Code O 3/9 ID
Postal code, or zip code for United States addresses.
If postal code is Canadian, it must be transmitted in one of the following formats: ANA NAN, ANANAN, ANA-NAN.
ISO 3166 Codes for Representation of Countries, Appendix E, Table #2 should be used.
R4 – Port or Terminal M 1/10
This segment is mandatory and is to list a minimum of 1 and a maximum of 10 ports of call that the vessel departed from on the particular voyage, including all Canadian ports of call. Ports should be reported chronologically.
R401 – Port or Terminal Function Code M 1/1 ID
The default value should be “O” for Origin.
R404 – Port Name M 5/5 ID
This element is to identify up to the last 10 ports of call that the vessel departed from on the particular voyage, in UNLOCODE format. This should also include all Canadian ports to which the vessel will report.
R406 – Terminal Name O 2/30 AN
Mandatory where the port of call is a Canadian port and will indicate the terminal in text format to which the vessel will report (e.g., Ceres or Halterm).
R407 – Pier O 1/4 AN
This element is optional and will indicate the pier number to which the vessel will report.
K1 – Remarks O 0/5
ÓCCRA, 2003 187
N404 – Country Code M 2/3 ID
K101 Free-Form Message O 1/30 AN
K102 Free-Form Message O 1/30 AN
The first occurrence of K101 will indicate if the vessel is in charter service and the terms of the charter, using the following codes, V (voyage) if the vessel is chartered by trip or voyage, B (bare boat) if the vessel has been chartered without crew, T (time) if the vessel has been chartered on a time basis (by day, week, etc.), or N (No) if the vessel is not on charter.
Any subsequent occurrences of K101 or K102 will include any comments/information such as:
If the vessel is involved in a specialized operation such as drilling, dredging, ice breaking, oceanography or cartography.
In the case of tug/barge operations, use this field to indicate the number of barges pulled. For a tug pulling one or more barges, record the name, nationality and gross register tonnes of each barge in this field. If a separate A6 is submitted, it is not necessary to provide the information on each barge as stated.
LX – Assigned Number O 0/999
LX01- Assigned Number M 1/6 NO
A sequential assigned number to differentiate a grouping within the LX segment. This is mandatory if there is containerized cargo on board the vessel.
Y2 – Container Details O 0/1
This segment is to provide information relating to the number and size of containers for a particular voyage. This should be completed only where the vessel has containerized cargo.
Y201 – Number of Containers M 1/4 NO
Submit the number of shipping containers by equipment type (container size and loaded/empty status). This element is submitted in conjunction with Y204.
Y204 – Equipment Type Code M 4/4 ID
This element combines the size of the equipment/container as well as the loaded or empty status of the container size. Therefore, the submission of the number of containers must be provided separately based on equipment size and loaded/empty status. For example, if there are 12, 40-foot, loaded containers, the Y201 would show 12, and the Y204 would show 40L.
ÓCCRA, 2003 188
APPENDIX E – CODE TABLES
This appendix contains a listing of the nine code tables to be used for sending EDI (cargo/conveyance/supplementary/empties/exports). These code lists are distributed in electronic format (on diskette) as ASCII files. Application developers can use these files to load, or update, their internal code tables.
TABLE #1 - CUSTOMS OFFICE CODES
TABLE #2 - COUNTRY
TABLE #3 - QUANTITY UOM CODE/PACKAGING FORM CODES
TABLE #4 - SUB-LOCATION CODES (WAREHOUSE ID)
TABLE #5 - EQUIPMENT SIZE
TABLE #6 - EQUIPMENT TYPE
TABLE #7 - UN DANGEROUS GOODS - For more information go to http://www.tc.gc.ca/tdg/clear/schedule3.asp
TABLE #8 - UNLOCODE
TABLE #9 - CANADIAN PROVINCE CODES & US STATE CODES
ÓCCRA, 2003 190
APPENDIX F – ANSI RESPONSE MAPS & EXTERNAL ERROR CODES
ANSI 997Segment ID /
Position in SegmentElement
IDName Notes Attributes
Req Type Size/Occur
Codes
ST Transaction Set Header To indicate the start of a transaction set and to assign a control number
M 1
01 143 Transaction Set Identifier Code Code uniquely identifying a Transaction Set M ID 3/3 997 Functional Acknowledgment02 329 Transaction Set Control Number Identifying control number that must be
unique within the transaction set functional group assigned by the originator for a transaction set
M AN 4/9
AK1 Functional Group Response Header
To start acknowledgment of a functional group
M 1
01 479 Functional Identifier Code AK101 is the functional ID found in the GS segment (GS01) in the functional group being acknowledged.
M ID 2/2
02 28 Group Control Number AK102 is the functional group control number found in the GS segment (GS06) in the functional group being acknowledged.
M N0 1/9
Loop ID – AK2
O 999999
AK2 Transaction Set Response Header
To start acknowledgment of a single transaction set
O 1
01 143 Transaction Set Identifier Code AK201 is the transaction set ID found in the ST segment (ST01) in the transaction set being acknowledged.
M ID 3/3
02 329 Transaction Set Control Number AK202 is the transaction set control number found in the ST segment (ST02) in the transaction set being acknowledged.
M AN 4/9
Loop ID – AK3
O 999999
AK3 Data Segment Note To report errors in a data segment and identify the location of the data segment
O 1
01 721 Segment ID Code Code defining the segment ID of the data segment in error
M ID 2/3
02 719 Segment Position in Transaction Set The numerical count position of this data M N0 1/6
ÓCCRA, 2003 192
Segment ID / Position in Segment
Element ID
Name Notes AttributesReq Type Size/
Occur
Codes
segment from the start of the transaction set: the transaction set header (ST) is count position 1
03 447 Loop Identifier Code The loop ID number given on the transaction set diagram is the value for this data element
O AN 1/6
04 720 Segment Syntax Error Code Code indicating error found based on the syntax editing of a segment
O ID 1/3 1 Unrecognized segment ID2 Unexpected segment3 Mandatory segment missing4 Loop Occurs Over Maximum Times5 Segment Exceeds Maximum Use6 Segment Not in Defined Transaction Set7 Segment Not in Proper Sequence8 Segment Has Data Element Error
AK4 Data Element Note To report errors in a data element or composite data structure and identify the location of the data element
O 99
01 C030 Position in Segment M01.1 722 Element Position in Segment This is used to indicate the relative position
of a simple data element, or the relative position of a composite data structure with the relative position of the component within the composite data structure, in error; in the data segment the count starts with 1 for the simple data element or composite data structure immediately following the segment ID
M N0 1/2
01.2 1528 Component Data Element Position in Composite
To identify the component data element position within the composite that is in error
O N0 1/2
02 725 Data Element Reference Number Reference number used to locate the data element in the Data Element Dictionary
O N0 1/4
03 723 Data Element Syntax Error Code Code indicating the error found after syntax edits of a data element
M ID 1/3 1 Mandatory data element missing2 Conditional required data element missing.3 Too many data elements.4 Data element too short.5 Data element too long.6 Invalid character in data element.7 Invalid code value.8 Invalid Date9 Invalid Time10 Exclusion Condition Violated
ÓCCRA, 2003 193
Segment ID / Position in Segment
Element ID
Name Notes AttributesReq Type Size/
Occur
Codes
04 724 Copy of Bad Data Element This is a copy of the data element in error O AN 1/99
AK5 Transaction Set Response Trailer
To acknowledge acceptance or rejection and report errors in a transaction set
M 1
01 717 Transaction Set Acknowledgment Code Code indicating accept or reject condition based on the syntax editing of the transaction set
M ID 1/1 A AcceptedE Accepted But Errors Were NotedM Rejected, Message Authentication Code (MAC) FailedR RejectedW Rejected, Assurance Failed Validity TestsX Rejected, Content After Decryption Could Not Be Analyzed
02 718 Transaction Set Syntax Error Code Code indicating error found based on the syntax editing of a transaction set
O ID 1/3 1 Transaction Set Not Supported2 Transaction Set Trailer Missing3 Transaction Set Control Number in Header and Trailer Do Not Match4 Number of Included Segments Does Not Match Actual Count5 One or More Segments in Error6 Missing or Invalid Transaction Set Identifier7 Missing or Invalid Transaction Set Control Number
03 718 Transaction Set Syntax Error Code As above O ID 1/304 718 Transaction Set Syntax Error Code As above O ID 1/305 718 Transaction Set Syntax Error Code As above O ID 1/306 718 Transaction Set Syntax Error Code As above O ID 1/3
AK9 Functional Group Response Trailer
To acknowledge acceptance or rejection of a functional group and report the number of included transaction sets from the original trailer, the accepted sets, and the received sets in this functional group
M 1
01 715 Functional Group Acknowledge Code Code indicating accept or reject condition based on the syntax editing of the functional group
M ID 1/1
02 97 Number of Transaction Sets Included Total number of transaction sets included in the functional group or interchange (transmission) group terminated by the trailer containing this data element
M N0 1/6
03 123 Number of Received Transaction Sets Number of Transaction Sets received M N0 1/604 2 Number of Accepted Transaction Sets Number of accepted Transaction Sets in a
Functional GroupM N0 1/6
ÓCCRA, 2003 194
Segment ID / Position in Segment
Element ID
Name Notes AttributesReq Type Size/
Occur
Codes
05 716 Functional Group Syntax Error Code Code indicating error found based on the syntax editing of the functional group header and/or trailer
O ID 1/3 1 Functional Group Not Supported2 Functional Group Version Not Supported3 Functional Group Trailer Missing4 Group Control Number in the Functional Group Header and Trailer Do Not Agree5 Number of Included Transaction Sets Does Not Match Actual Count6 Group Control Number Violates Syntax
06 716 Functional Group Syntax Error Code As above O ID 1/307 716 Functional Group Syntax Error Code As above O ID 1/308 716 Functional Group Syntax Error Code As above O ID 1/309 716 Functional Group Syntax Error Code As above O ID 1/3
SE Transaction Set Trailer To indicate the end of the transaction set and provide the count of the transmitted segments (including the beginning (ST) and ending (SE) segments
01 96 Number of Included Segments02 329 Transaction Set Control Number
ÓCCRA, 2003 195
ANSI 824
Segment ID / Element
Data Element
Name Notes Attributes Codes
ST Transaction Set Header To indicate the start of a transaction set and to assign a control number
M 1/1
01 143 Transaction set ID code M ID 3/3 82402 329 Transaction Set Control Number M AN 4/9BGN Functional Group Response Header To indicate the beginning of a transaction set M 1/101 353 Transaction Set Purpose Code M ID 2/2 06 – Confirmation
44 – Rejection37 - Do Not Load21 - Hold44 - Do Not Unload01 - Cancellation
02 127 Reference Identification The transaction set control number from the ST segment of the original transaction sent to Customs
M AN 1/30
03 373 Date Date of the original transaction M DT 8/8Loop ID – OTI >1OTI Original Transaction Identification To identify the edited transaction set and the level at which the
results of the edit are reported, and to indicate the accepted, rejected, or accepted-with-change edit result
M 1/1
01 110 Application Acknowledgement Code M ID 1/2 IA – Item AcceptIR – Item RejectIR is used with 37, 21, 44, Use IA with 01
02 128 Reference Identification Qualifier TG reflects the Conveyance Reference Number.XC reflects the Cargo Control Number (CCN) or the Supplementary Reference Number.7U reflects the Related Transaction Reference Number for notices 37, 21, 44 and 01 where applicable.
M ID 2/3 TG - Transportation Control NumberXC - Cargo Control Number/ Supplementary Reference Number7U – Related Transaction Reference Number.
03 127 Reference Identification CCN, Conveyance Report Number, Supplementary Reference Number
M AN 1/30
REF Reference Identification To specify identifying information O 0/1201 128 Reference Identification Qualifier M ID 2/3 ZZ – Mutually Defined02 127 Reference Identification Version number from the N902 (N901=’V0’) of the related 311
transaction set.M AN 1/30
LOOP ID – OTI/TED
>1
TED Technical Error Description To identify the error and, if feasible, the erroneous segment, or data element, or both. Elements 04 and 08 will not be used.
O 1/1
01 647 Application Error Condition Code M ID 1/3 ZZZ – Mutually Defined
ÓCCRA, 2003 196
Segment ID / Element
Data Element
Name Notes Attributes Codes
02 3 Free Form Message 3 digit Canada Customs reject code O AN 1/60 List of codes provided by Canada Customs.
03 721 Segment ID Code O ID 2/305 722 Element Position in Segment O N0 1/206 725 Data Element Reference Number O N0 1/407 724 Copy of Bad Data Element O AN 1/99NTE Note/Special Instruction To transmit information in a free-form
format, if necessary, for comment or specialinstruction
O1/100
01 363 Note Reference Code Code identifying the functional area or purpose for which the note applies
O ID 3/3 ERN - Error NotesEED – Equipment Description
02 352 Description A free-form description to clarify the related data elements and their content
M AN 1/80 ERN used if remarks on NoticesEED used to list the containers
SE To indicate the end of the transaction set and provide the count of the transmitted segments (including the beginning (ST) and ending (SE) segments)
M 1/1
01 Number of Included Segments M N0 1/1002 Transaction Set Control Number M AN 4/9
ÓCCRA, 2003 197
EXTERNAL ERROR CODESEDI
Message #Element
IDMessage
#Group Field Description Segment Element Message Text
003 1210 100010Validation Number of Containers Y2 1 FIELD IS MANDATORY004 1427 100010Validation Container Prefix ED 1 FIELD IS MANDATORY005 1429 100010Validation Container Serial Number ED 2 FIELD IS MANDATORY006 1431 100010Validation Load/Empty Status ED 3 FIELD IS MANDATORY013 1607 100010Validation Voyage Number V1 4 FIELD IS MANDATORY014 1608 100010Validation Containerized weight V2 7 FIELD IS MANDATORY015 1609 100010Validation Containerized Weight Unit V2 8 FIELD IS MANDATORY016 1611 100010Validation Charter Type Code K1 1 FIELD IS MANDATORY017 1612 100010Validation Number of Crew V2 16 FIELD IS MANDATORY018 1617 100010Validation Non Containerized Weight V2 9 FIELD IS MANDATORY019 1618 100010Validation Non Containerized unit V2 10 FIELD IS MANDATORY020 1622 100010Validation Number of Passengers V2 17 FIELD IS MANDATORY021 1628 100010Validation Transport Method V1 9 FIELD IS MANDATORY023 1929 100010Validation Lading Line Number LO 1 FIELD IS MANDATORY024 1932 100010Validation Lading Quantity LO 8 FIELD IS MANDATORY025 1933 100010Validation Lading Quantity Qualifier LO 9 FIELD IS MANDATORY026 1934 100010Validation Weight LO 4 FIELD IS MANDATORY027 1935 100010Validation Weight Unit Qualifier LO 11 FIELD IS MANDATORY033 2457 100010Validation Place of Receipt of
Goods NameR4 3 FIELD IS MANDATORY
036 2537 100010Validation Gross Registered Tons V2 5 FIELD IS MANDATORY037 2538 100010Validation Weight Unit Qualifier V2 6 FIELD IS MANDATORY038 2539 100010Validation Length Unit V2 15 FIELD IS MANDATORY039 2540 100010Validation Lloyds Code V1 1 FIELD IS MANDATORY040 2541 100010Validation Name of Master V2 13 FIELD IS MANDATORY041 2543 100010Validation Net Registered Tons V2 3 FIELD IS MANDATORY042 2544 100010Validation Weight Unit Qualifier V2 4 FIELD IS MANDATORY043 2545 100010Validation Registry Number V2 2 FIELD IS MANDATORY044 2547 100010Validation Place of Registry V2 1 FIELD IS MANDATORY045 2548 100010Validation Weight Unit Qualifier V2 12 FIELD IS MANDATORY046 2549 100010Validation Summer Dead Weight
TonnageV2 11 FIELD IS MANDATORY
047 2550 100010Validation Ships Overall Length V2 14 FIELD IS MANDATORY048 2551 100010Validation Name V1 2 FIELD IS MANDATORY049 2553 100010Validation Nationality V1 3 FIELD IS MANDATORY050 2640 100010Validation Lading Description L5 2 FIELD IS MANDATORY
ÓCCRA, 2003 198
EDI Message #
Element ID
Message #
Group Field Description Segment Element Message Text
052 2780 100010Validation Container Size/Type Y2 4 FIELD IS MANDATORY053 2782 100010Validation Container Size/Type Y2 4 FIELD IS MANDATORY055 3300 100010Validation Vessel Type Code V1 7 FIELD IS MANDATORY062 3344 100010Validation Generated Detail
ID Number FIELD IS MANDATORY
064 4000 100010Validation Date of Arrival V3 4 FIELD IS MANDATORY065 4007 100010Validation Safety Ship Expiry
Date of Certificate N9 4 FIELD IS MANDATORY
066 4008 100010Validation Safety Radio Expiry Date of Certificate
N9 4 FIELD IS MANDATORY
067 4009 100010Validation Safety Equipment Expiry Date of Certificate
N9 4 FIELD IS MANDATORY
068 4010 100010Validation Load Line Expiry Date of Certificate
N9 4 FIELD IS MANDATORY
069 4011 100010Validation Derat Expiry Date of Certificate
N9 4 FIELD IS MANDATORY
070 4106 100010Validation Shipper Country N4 4 FIELD IS MANDATORY071 4107 100010Validation Shipper City Name N4 1 FIELD IS MANDATORY072 4110 100010Validation Shipper Name N1 2 FIELD IS MANDATORY073 4112 100010Validation Shipper Address 1 N3 1 FIELD IS MANDATORY077 4148 100010Validation Consignee Country N4 4 FIELD IS MANDATORY078 4149 100010Validation Consignee City Name N4 1 FIELD IS MANDATORY079 4152 100010Validation Consignee Name N1 2 FIELD IS MANDATORY080 4154 100010Validation Consignee Address 1 N3 1 FIELD IS MANDATORY083 4356 100010Validation Manifest From
Customs OfficeR4 3 FIELD IS MANDATORY
084 4357 100010Validation Manifest To Customs Office
R4 3 FIELD IS MANDATORY
086 4364 100010Validation Carrier Code + Report Number
N9 2 FIELD IS MANDATORY
088 4400 100010Validation Sailing Date V3 2 FIELD IS MANDATORY089 4401 100010Validation Registration Date
and TimeDTM 02-03 FIELD IS MANDATORY
090 4508 100010Validation Shipping Line Name N1 2 FIELD IS MANDATORY091 4521 100010Validation Ship's Agent Name N1 2 FIELD IS MANDATORY092 4534 100010Validation Ship's Owner Name N1 2 FIELD IS MANDATORY096 4581 100010Validation Current Port of Loading V3 1 FIELD IS MANDATORY096 4581 100010Validation Current Port of Loading V3 1 FIELD IS MANDATORY
ÓCCRA, 2003 199
EDI Message #
Element ID
Message #
Group Field Description Segment Element Message Text
097 4582 100010Validation Port of Arrival/Next Port of Discharge
V3 3 FIELD IS MANDATORY
098 4583 100010Validation Port Code R4 4 FIELD IS MANDATORY099 4587 100010Validation Consortium Partner
NameN1 2 FIELD IS MANDATORY
100 4601 100010Validation Consortium Partner Carrier Code
N1 4 FIELD IS MANDATORY
104 5005 100010Validation Group Identifier (Cargo Record)
FIELD IS MANDATORY
105 5006 100010Validation Group Identifier (Cargo Description)
FIELD IS MANDATORY
109 5065 100010Validation Group Identifier (Ports)
FIELD IS MANDATORY
114 4000 100016Validation Date of Arrival V3 4 ETA DATE CANNOT BE MORE THAN 30 DAYS115 1103 100018Key Cargo Control Number
(CCN) DUPLICATE FIELD
117 1429 100018Validation Container Serial Number
ED 2 DUPLICATE FIELD
118 1442 100018Validation Seal Number M7 1 DUPLICATE FIELD120 1929 100018Validation Lading Line Number LO 1 DUPLICATE FIELD121 3344 100018Validation Generated Detail
ID Number DUPLICATE FIELD
127 1210 100028Validation Number of Containers Y2 1 FIELD MUST BE NUMERIC133 1608 100028Validation Containerized weight V2 7 FIELD MUST BE NUMERIC134 1612 100028Validation Number of Crew V2 16 FIELD MUST BE NUMERIC135 1617 100028Validation Non Containerized
WeightV2 9 FIELD MUST BE NUMERIC
136 1622 100028Validation Number of Passengers V2 17 FIELD MUST BE NUMERIC137 1926 100028Validation Volume LO 6 FIELD MUST BE NUMERIC138 1929 100028Validation Lading Line Number LO 1 FIELD MUST BE NUMERIC139 1932 100028Validation Lading Quantity LO 8 FIELD MUST BE NUMERIC140 1934 100028Validation Weight LO 4 FIELD MUST BE NUMERIC146 2537 100028Validation Gross Registered Tons V2 5 FIELD MUST BE NUMERIC147 2543 100028Validation Net Registered Tons V2 3 FIELD MUST BE NUMERIC148 2549 100028Validation Summer Dead
Weight TonnageV2 11 FIELD MUST BE NUMERIC
149 2550 100028Validation Ships Overall Length V2 14 FIELD MUST BE NUMERIC
ÓCCRA, 2003 200
EDI Message #
Element ID
Message #
Group Field Description Segment Element Message Text
153 3344 100028Validation Generated Detail ID Number
FIELD MUST BE NUMERIC
157 4007 100029Validation Safety Ship Expiry Date of Certificate
N9 4 FIELD HAS INVALID DATE FORMAT
158 4008 100029Validation Safety Radio Expiry Date of Certificate
N9 4 FIELD HAS INVALID DATE FORMAT
159 4009 100029Validation Safety Equipment Expiry Date of Certificate
N9 4 FIELD HAS INVALID DATE FORMAT
160 4010 100029Validation Load Line Expiry Date of Certificate
N9 4 FIELD HAS INVALID DATE FORMAT
161 4011 100029Validation Derat Expiry Date of Certificate
N9 4 FIELD HAS INVALID DATE FORMAT
162 4012 100029Validation Maritime Declaration of Heath Expiry Date
N9 4 FIELD HAS INVALID DATE FORMAT
163 4013 100029Validation Civil Liability for Oil Expiry Date
N9 4 FIELD HAS INVALID DATE FORMAT
164 4400 100029Validation Sailing Date V3 2 FIELD HAS INVALID DATE FORMAT165 4401 100029Validation Registration Date
and TimeDTM 02-03 FIELD HAS INVALID DATE FORMAT
166 1107 100044Key Cargo Control Number (CCN)
FIELD IS NOT FOUND
167 1103 100053Key Cargo Control Number (CCN)
FIELD IS NOT VALID
186 1210 100053Validation Number of Containers Y2 1 FIELD IS NOT VALID188 1427 100053Validation Container Prefix ED 1 FIELD IS NOT VALID189 1429 100053Validation Container Serial
NumberED 2 FIELD IS NOT VALID
190 1431 100053Validation Load/Empty Status ED 3 FIELD IS NOT VALID193 1442 100053Validation Seal Number M7 1 FIELD IS NOT VALID201 1607 100053Validation Voyage Number V1 4 FIELD IS NOT VALID202 1608 100053Validation Containerized weight V2 7 FIELD IS NOT VALID203 1609 100053Validation Containerized Weight
UnitV2 8 FIELD IS NOT VALID
204 1611 100053Validation Charter Type Code K1 1 FIELD IS NOT VALID205 1612 100053Validation Number of Crew V2 16 FIELD IS NOT VALID206 1617 100053Validation Non Containerized
WeightV2 9 FIELD IS NOT VALID
ÓCCRA, 2003 201
EDI Message #
Element ID
Message #
Group Field Description Segment Element Message Text
207 1618 100053Validation Non Containerized unit
V2 10 FIELD IS NOT VALID
208 1622 100053Validation Number of Passengers
V2 17 FIELD IS NOT VALID
209 1627 100053Validation Free Format information
K1 2 FIELD IS NOT VALID
210 1628 100053Validation Transport Method V1 9 FIELD IS NOT VALID211 1909 100053Validation Free Format Info K1 1 FIELD IS NOT VALID212 1924 100053Validation Weight Qualifier LO 5 FIELD IS NOT VALID213 1926 100053Validation Volume LO 6 FIELD IS NOT VALID214 1927 100053Validation Volume Qualifier LO 7 FIELD IS NOT VALID215 1929 100053Validation Lading Line
NumberLO 1 FIELD IS NOT VALID
216 1932 100053Validation Lading Quantity LO 8 FIELD IS NOT VALID217 1933 100053Validation Lading Quantity
QualifierLO 9 FIELD IS NOT VALID
218 1934 100053Validation Weight LO 4 FIELD IS NOT VALID219 1935 100053Validation Weight Unit Qualifier LO 11 FIELD IS NOT VALID229 2455 100053Validation Place of Receipt
of Goods, Country CodeR4 5 FIELD IS NOT VALID
230 2456 100053Validation Final Destination Location
R4 3 FIELD IS NOT VALID
231 2457 100053Validation Place of Receipt of Goods Name
R4 3 FIELD IS NOT VALID
235 2537 100053Validation Gross Registered Tons V2 5 FIELD IS NOT VALID236 2538 100053Validation Weight Unit Qualifier V2 6 FIELD IS NOT VALID237 2539 100053Validation Length Unit V2 15 FIELD IS NOT VALID238 2540 100053Validation Lloyds Code V1 1 FIELD IS NOT VALID239 2541 100053Validation Name of Master V2 13 FIELD IS NOT VALID240 2543 100053Validation Net Registered Tons V2 3 FIELD IS NOT VALID241 2544 100053Validation Weight Unit Qualifier V2 4 FIELD IS NOT VALID242 2545 100053Validation Registry Number V2 2 FIELD IS NOT VALID243 2547 100053Validation Place of Registry V2 1 FIELD IS NOT VALID244 2548 100053Validation Weight Unit Qualifier V2 12 FIELD IS NOT VALID245 2549 100053Validation Summer Dead Weight
TonnageV2 11 FIELD IS NOT VALID
246 2550 100053Validation Ships Overall Length V2 14 FIELD IS NOT VALID247 2551 100053Validation Name V1 2 FIELD IS NOT VALID
ÓCCRA, 2003 202
EDI Message #
Element ID
Message #
Group Field Description Segment Element Message Text
248 2553 100053Validation Nationality V1 3 FIELD IS NOT VALID249 2640 100053Validation Lading Description L5 2 FIELD IS NOT VALID250 2644 100053Validation Marks and Numbers
DescriptionL5 6 FIELD IS NOT VALID
256 2782 100053Validation Container Size/Type Y2 4 FIELD IS NOT VALID259 2956 100053Validation Commodity Code
Qualifier L5 4 FIELD IS NOT VALID
260 3300 100053Validation Vessel Type Code V1 7 FIELD IS NOT VALID261 3331 100053Validation Final Destination,
Port NameR4 4 FIELD IS NOT VALID
270 3344 100053Validation Generated Detail ID Number
FIELD IS NOT VALID
273 4000 100053Validation Date of Arrival V3 4 FIELD IS NOT VALID275 4007 100053Validation Safety Ship Expiry
Date of Certificate N9 4 FIELD IS NOT VALID
276 4008 100053Validation Safety Radio Expiry Date of Certificate
N9 4 FIELD IS NOT VALID
277 4009 100053Validation Safety Equipment Expiry Date of Certificate
N9 4 FIELD IS NOT VALID
278 4010 100053Validation Load Line Expiry Date of Certificate
N9 4 FIELD IS NOT VALID
279 4011 100053Validation Derat Expiry Date of Certificate
N9 4 FIELD IS NOT VALID
280 4012 100053Validation Maritime Declaration of Heath Expiry Date
N9 4 FIELD IS NOT VALID
281 4013 100053Validation Civil Liability for Oil Expiry Date
N9 4 FIELD IS NOT VALID
282 4077 100053Validation Notify Party Telephone Number
N3 FIELD IS NOT VALID
283 4078 100053Validation Notify Party Country N4 4 FIELD IS NOT VALID284 4079 100053Validation Notify Party City
NameN4 1 FIELD IS NOT VALID
285 4080 100053Validation Notify Party State/Prov Code
N4 2 FIELD IS NOT VALID
286 4081 100053Validation Notify Party Postal Code
N4 3 FIELD IS NOT VALID
287 4082 100053Validation Notify Party Name N1 2 FIELD IS NOT VALID288 4084 100053Validation Notify Party
Address 1N3 1 FIELD IS NOT VALID
ÓCCRA, 2003 203
EDI Message #
Element ID
Message #
Group Field Description Segment Element Message Text
289 4085 100053Validation Notify Party Address 2
N3 2 FIELD IS NOT VALID
290 4086 100053Validation Notify Party Address 3
N3 FIELD IS NOT VALID
291 4105 100053Validation Shipper Telephone Number
N3 FIELD IS NOT VALID
292 4106 100053Validation Shipper Country N4 4 FIELD IS NOT VALID293 4107 100053Validation Shipper City Name N4 1 FIELD IS NOT VALID294 4108 100053Validation Shipper State/Prov
CodeN4 2 FIELD IS NOT VALID
295 4109 100053Validation Shipper Postal Code N4 3 FIELD IS NOT VALID296 4110 100053Validation Shipper Name N1 2 FIELD IS NOT VALID297 4112 100053Validation Shipper Address 1 N3 1 FIELD IS NOT VALID298 4113 100053Validation Shipper Address 2 N3 2 FIELD IS NOT VALID299 4114 100053Validation Shipper Address 3 N3 FIELD IS NOT VALID309 4147 100053Validation Consignee Telephone
NumberN3 FIELD IS NOT VALID
310 4148 100053Validation Consignee Country N4 4 FIELD IS NOT VALID311 4149 100053Validation Consignee City Name N4 1 FIELD IS NOT VALID312 4150 100053Validation Consignee State/Prov
CodeN4 2 FIELD IS NOT VALID
313 4151 100053Validation Consignee Postal Code N4 3 FIELD IS NOT VALID314 4152 100053Validation Consignee Name N1 2 FIELD IS NOT VALID315 4154 100053Validation Consignee Address 1 N3 1 FIELD IS NOT VALID316 4155 100053Validation Consignee Address 2 N3 2 FIELD IS NOT VALID317 4156 100053Validation Consignee Address 3 N3 FIELD IS NOT VALID358 4356 100053Validation Manifest From
Customs OfficeR4 3 FIELD IS NOT VALID
359 4357 100053Validation Manifest To Customs Office
R4 3 FIELD IS NOT VALID
362 4364 100053Validation Carrier Code + Report Number
N9 2 FIELD IS NOT VALID
364 4400 100053Validation Sailing Date V3 2 FIELD IS NOT VALID364 4400 100053Validation Date of Sailing V3 2 FIELD IS NOT VALID365 4401 100053Validation Registration Date and Time DTM 02-03 FIELD IS NOT VALID367 4503 100053Validation Shipping Line
Telephone NumberN3 FIELD IS NOT VALID
ÓCCRA, 2003 204
EDI Message #
Element ID
Message #
Group Field Description Segment Element Message Text
368 4504 100053Validation Shipping Line Country
N4 4 FIELD IS NOT VALID
369 4505 100053Validation Shipping Line City Name
N4 1 FIELD IS NOT VALID
370 4506 100053Validation Shipping Line State/Prov Code
N4 2 FIELD IS NOT VALID
371 4507 100053Validation Shipping Line Postal Code
N4 3 FIELD IS NOT VALID
372 4508 100053Validation Shipping Line Name N1 2 FIELD IS NOT VALID374 4510 100053Validation Shipping Line
Address 1N3 1 FIELD IS NOT VALID
375 4511 100053Validation Shipping Line Address 2
N3 2 FIELD IS NOT VALID
376 4512 100053Validation Shipping Line Address 3
N3 FIELD IS NOT VALID
377 4516 100053Validation Ship's Agent Telephone Number
N3 FIELD IS NOT VALID
378 4517 100053Validation Ship's Agent Country N4 4 FIELD IS NOT VALID379 4518 100053Validation Ship's Agent
City NameN4 1 FIELD IS NOT VALID
380 4519 100053Validation Ship's Agent State/Prov Code
N4 2 FIELD IS NOT VALID
381 4520 100053Validation Ship's Agent Postal Code N4 3 FIELD IS NOT VALID382 4521 100053Validation Ship's Agent Name N1 2 FIELD IS NOT VALID384 4523 100053Validation Ship's Agent
Address 1N3 1 FIELD IS NOT VALID
385 4524 100053Validation Ship's Agent Address 2
N3 2 FIELD IS NOT VALID
386 4525 100053Validation Ship's Agent Address 3
N3 FIELD IS NOT VALID
387 4529 100053Validation Ship's Owner Telephone Number
N3 FIELD IS NOT VALID
388 4530 100053Validation Ship's Owner Country N4 4 FIELD IS NOT VALID389 4531 100053Validation Ship's Owner
City NameN4 1 FIELD IS NOT VALID
390 4532 100053Validation Ship's Owner State/Prov Code
N4 2 FIELD IS NOT VALID
391 4533 100053Validation Ship's Owner Postal Code
N4 3 FIELD IS NOT VALID
ÓCCRA, 2003 205
EDI Message #
Element ID
Message #
Group Field Description Segment Element Message Text
392 4534 100053Validation Ship's Owner Name N1 2 FIELD IS NOT VALID394 4536 100053Validation Ship's Owner
Address 1N3 1 FIELD IS NOT VALID
395 4537 100053Validation Ship's Owner Address 2
N3 2 FIELD IS NOT VALID
396 4538 100053Validation Ship's Owner Address 3
N3 FIELD IS NOT VALID
422 4581 100053Validation Current Port of Loading
V3 1 FIELD IS NOT VALID
423 4582 100053Validation Port of Arrival/Next Port of Discharge
V3 3 FIELD IS NOT VALID
424 4583 100053Validation Port Code R4 4 FIELD IS NOT VALID425 4587 100053Validation Consortium Partner
NameN1 2 FIELD IS NOT VALID
426 4601 100053Validation Consortium Partner Carrier Code
N1 4 FIELD IS NOT VALID
428 4610 100053Validation Terminal Name R4 6 FIELD IS NOT VALID429 4612 100053Validation Pier Number R4 7 FIELD IS NOT VALID435 5004 100053Validation Group Identifier
(Container) FIELD IS NOT VALID
436 5005 100053Validation Group Identifier (Cargo Record)
FIELD IS NOT VALID
437 5006 100053Validation Group Identifier (Cargo Description)
FIELD IS NOT VALID
446 5065 100053Validation Group Identifier (Ports)
FIELD IS NOT VALID
447 5066 100053Validation Group Identifier(Containers)
FIELD IS NOT VALID
448 5069 100053Validation Group Identifier (Consortium Partners)
FIELD IS NOT VALID
451 5112 100053Validation Group Identifier (Seal)
FIELD IS NOT VALID
459 1107 100101Key Cargo Control Number (CCN)
INVALID CLIENT ID
461 1103 100116Key Cargo Control Number (CCN)
REQUEST MUST EXIST ON FILE
463 1103 100134Key Cargo Control Number (CCN)
INVALID STATUS OF REQUEST
ÓCCRA, 2003 206
EDI Message #
Element ID
Message #
Group Field Description Segment Element Message Text
466 1103 100135Key Cargo Control Number (CCN)
REQUEST MUST BE PORT-ON-PORT
467 4356 100136Validation Manifest From Customs Office
R4 3 PORT OF REPORT MUST BE A PORT OFFICE
468 4357 100137Validation Manifest To Customs Office
R4 3 PORT OF DESTINATION MUST BE A PORT OFFICE
472 2537 100154Validation Gross Registered Tons V2 5 REGISTERED TONNAGE CANNOT BE GREATER THAN GROSS REGISTERED TONNAGE
473 4400 100156Validation Sailing Date V3 2 DEPARTURE DATE CANNOT BE GREATER THAN EXPIRY DATE
473 4400 100156Validation Date of Sailing V3 2 DEPARTURE DATE CANNOT BE GREATER THAN EXPIRY DATE
474 1926 100157Validation Volume LO 6 FIELD AND UOM MUST BE ENTERED TOGETHER
475 1927 100157Validation Volume Qualifier LO 7 FIELD AND UOM MUST BE ENTERED TOGETHER
477 1100 100163Key Carrier Code CLIENT NOT VALID FOR SERVICE OPTION478 1431 100166Validation Load/Empty Status ED 3 DUPLICATE CODES NOT ALLOWED479 4356 100175Validation Manifest From
Customs OfficeR4 3 OFFICE IS NOT AUTOMATED FOR
REQUEST TYPE480 4357 100175Validation Manifest To
Customs OfficeR4 3 OFFICE IS NOT AUTOMATED FOR
REQUEST TYPE482 1107 100176Key Cargo Control
Number (CCN) INVALID CLIENT TYPE FOR THIS
REQUEST TYPE483 4356 100177Validation Manifest From
Customs OfficeR4 3 SERVICE OPTION NOT VALID
FOR OFFICE484 4357 100177Validation Manifest To
Customs OfficeR4 3 SERVICE OPTION NOT VALID
FOR OFFICE492 1103 100205Key Cargo Control
Number (CCN) CCN EXISTS FOR AUTOMOTIVE
RELEASEA12 1210 100226Validation Number of Containers Y2 1 NUMBER OF OCCURENCES
EXCEEDS MAXIMUMA14 1427 100226Validation Container Prefix ED 1 NUMBER OF OCCURENCES
EXCEEDS MAXIMUMA15 1429 100226Validation Container Serial
NumberED 2 NUMBER OF OCCURENCES
EXCEEDS MAXIMUMA16 1431 100226Validation Load/Empty Status ED 3 NUMBER OF OCCURENCES
EXCEEDS MAXIMUM
ÓCCRA, 2003 207
EDI Message #
Element ID
Message #
Group Field Description Segment Element Message Text
A19 1442 100226Validation Seal Number M7 1 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
A27 1607 100226Validation Voyage Number V1 4 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
A28 1608 100226Validation Containerized weight V2 7 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
A29 1609 100226Validation Containerized Weight Unit
V2 8 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
A30 1611 100226Validation Charter Type Code K1 1 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
A31 1612 100226Validation Number of Crew V2 16 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
A32 1617 100226Validation Non Containerized Weight
V2 9 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
A33 1618 100226Validation Non Containerized unit V2 10 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
A34 1622 100226Validation Number of Passengers V2 17 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
A35 1627 100226Validation Free Format information K1 2 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
A36 1628 100226Validation Transport Method V1 9 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
A37 1909 100226Validation Free Format Info K1 1 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
A38 1924 100226Validation Weight Qualifier LO 5 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
A39 1926 100226Validation Volume LO 6 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
A40 1927 100226Validation Volume Qualifier LO 7 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
A41 1929 100226Validation Lading Line Number LO 1 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
A42 1932 100226Validation Lading Quantity LO 8 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
A43 1933 100226Validation Lading Quantity Qualifier
LO 9 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
A44 1934 100226Validation Weight LO 4 NUMBER OF OCCURENCES EXCEEDS MAXIMUMA45 1935 100226Validation Weight Unit Qualifier LO 11 NUMBER OF OCCURENCES
EXCEEDS MAXIMUMA55 2455 100226Validation Place of Receipt
of Goods, Country CodeR4 5 NUMBER OF OCCURENCES
EXCEEDS MAXIMUM
ÓCCRA, 2003 208
EDI Message #
Element ID
Message #
Group Field Description Segment Element Message Text
A56 2456 100226Validation Final Destination Location R4 3 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
A57 2457 100226Validation Place of Receipt of Goods Name
R4 3 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
A61 2537 100226Validation Gross Registered Tons V2 5 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
A62 2538 100226Validation Weight Unit Qualifier V2 6 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
A63 2539 100226Validation Length Unit V2 15 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
A64 2540 100226Validation Lloyds Code V1 1 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
A65 2541 100226Validation Name of Master V2 13 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
A66 2543 100226Validation Net Registered Tons V2 3 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
A67 2544 100226Validation Weight Unit Qualifier V2 4 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
A68 2545 100226Validation Registry Number V2 2 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
A69 2547 100226Validation Place of Registry V2 1 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
A70 2548 100226Validation Weight Unit Qualifier V2 12 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
A71 2549 100226Validation Summer Dead Weight Tonnage
V2 11 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
A72 2550 100226Validation Ships Overall Length V2 14 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
A73 2551 100226Validation Name V1 2 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
A74 2553 100226Validation Nationality V1 3 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
A75 2640 100226Validation Lading Description L5 2 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
A76 2644 100226Validation Marks and Numbers Description
L5 6 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
A82 2782 100226Validation Container Size/Type Y2 4 NUMBER OF OCCURENCES EXCEEDS MAXIMUMA85 2956 100226Validation Commodity Code
Qualifier L5 4 NUMBER OF OCCURENCES
EXCEEDS MAXIMUMA86 3300 100226Validation Vessel Type Code V1 7 NUMBER OF OCCURENCES
EXCEEDS MAXIMUM
ÓCCRA, 2003 209
EDI Message #
Element ID
Message #
Group Field Description Segment Element Message Text
A87 3331 100226Validation Final Destination, Port Name
R4 4 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
A96 3344 100226Validation Generated Detail ID Number
NUMBER OF OCCURENCES EXCEEDS MAXIMUM
A99 4000 100226Validation Date of Arrival V3 4 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
B02 4007 100226Validation Safety Ship Expiry Date of Certificate
N9 4 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
B03 4008 100226Validation Safety Radio Expiry Date of Certificate
N9 4 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
B04 4009 100226Validation Safety Equipment Expiry Date of Certificate
N9 4 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
B05 4010 100226Validation Load Line Expiry Date of Certificate
N9 4 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
B06 4011 100226Validation Derat Expiry Date of Certificate
N9 4 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
B07 4012 100226Validation Maritime Declaration of Heath Expiry Date
N9 4 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
B08 4013 100226Validation Civil Liability for Oil Expiry Date
N9 4 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
B09 4077 100226Validation Notify Party Telephone Number
N3 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
B10 4078 100226Validation Notify Party Country
N4 4 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
B11 4079 100226Validation Notify Party City Name
N4 1 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
B12 4080 100226Validation Notify Party State/Prov Code
N4 2 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
B13 4081 100226Validation Notify Party Postal Code
N4 3 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
B14 4082 100226Validation Notify Party Name N1 2 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
B15 4084 100226Validation Notify Party Address 1
N3 1 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
B16 4085 100226Validation Notify Party Address 2
N3 2 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
B17 4086 100226Validation Notify Party Address 3
N3 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
ÓCCRA, 2003 210
EDI Message #
Element ID
Message #
Group Field Description Segment Element Message Text
B18 4105 100226Validation Shipper Telephone Number
N3 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
B19 4106 100226Validation Shipper Country N4 4 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
B20 4107 100226Validation Shipper City Name N4 1 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
B21 4108 100226Validation Shipper State/Prov Code
N4 2 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
B22 4109 100226Validation Shipper Postal Code N4 3 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
B23 4110 100226Validation Shipper Name N1 2 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
B24 4112 100226Validation Shipper Address 1 N3 1 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
B25 4113 100226Validation Shipper Address 2 N3 2 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
B26 4114 100226Validation Shipper Address 3 N3 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
B36 4147 100226Validation Consignee Telephone Number
N3 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
B37 4148 100226Validation Consignee Country N4 4 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
B38 4149 100226Validation Consignee City Name N4 1 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
B39 4150 100226Validation Consignee State/Prov Code
N4 2 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
B40 4151 100226Validation Consignee Postal Code
N4 3 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
B41 4152 100226Validation Consignee Name N1 2 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
B42 4154 100226Validation Consignee Address 1
N3 1 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
B43 4155 100226Validation Consignee Address 2
N3 2 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
B44 4156 100226Validation Consignee Address 3
N3 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
B85 4356 100226Validation Manifest From Customs Office
R4 3 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
B86 4357 100226Validation Manifest To Customs Office
R4 3 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
ÓCCRA, 2003 211
EDI Message #
Element ID
Message #
Group Field Description Segment Element Message Text
B89 4364 100226Validation Carrier Code + Report Number
N9 2 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
B91 4400 100226Validation Sailing Date V3 2 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
B91 4400 100226Validation Date of Sailing V3 2 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
B92 4401 100226Validation Registration Date and Time
DTM 02-03 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
B94 4503 100226Validation Shipping Line Telephone Number
N3 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
B95 4504 100226Validation Shipping Line Country
N4 4 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
B96 4505 100226Validation Shipping Line City Name
N4 1 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
B97 4506 100226Validation Shipping Line State/Prov Code
N4 2 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
B98 4507 100226Validation Shipping Line Postal Code
N4 3 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
B99 4508 100226Validation Shipping Line Name
N1 2 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
C02 4510 100226Validation Shipping Line Address 1
N3 1 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
C03 4511 100226Validation Shipping Line Address 2
N3 2 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
C04 4512 100226Validation Shipping Line Address 3
N3 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
C05 4516 100226Validation Ship's Agent Telephone Number
N3 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
C06 4517 100226Validation Ship's Agent Country
N4 4 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
C07 4518 100226Validation Ship's Agent City Name
N4 1 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
C08 4519 100226Validation Ship's Agent State/Prov Code
N4 2 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
C09 4520 100226Validation Ship's Agent Postal Code
N4 3 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
C10 4521 100226Validation Ship's Agent Name N1 2 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
ÓCCRA, 2003 212
EDI Message #
Element ID
Message #
Group Field Description Segment Element Message Text
C12 4523 100226Validation Ship's Agent Address 1
N3 1 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
C13 4524 100226Validation Ship's Agent Address 2
N3 2 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
C14 4525 100226Validation Ship's Agent Address 3
N3 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
C15 4529 100226Validation Ship's Owner Telephone Number
N3 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
C16 4530 100226Validation Ship's Owner Country N4 4 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
C17 4531 100226Validation Ship's Owner City Name
N4 1 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
C18 4532 100226Validation Ship's Owner State/Prov Code
N4 2 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
C19 4533 100226Validation Ship's Owner Postal Code
N4 3 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
C20 4534 100226Validation Ship's Owner Name N1 2 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
C22 4536 100226Validation Ship's Owner Address 1
N3 1 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
C23 4537 100226Validation Ship's Owner Address 2
N3 2 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
C24 4538 100226Validation Ship's Owner Address 3
N3 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
C50 4581 100226Validation Current Port of Loading
V3 1 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
C51 4582 100226Validation Port of Arrival/Next Port of Discharge
V3 3 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
C52 4583 100226Validation Port Code R4 4 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
C53 4587 100226Validation Consortium Partner Name
N1 2 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
C54 4601 100226Validation Consortium Partner Carrier Code
N1 4 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
C56 4610 100226Validation Terminal Name R4 6 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
C57 4612 100226Validation Pier Number R4 7 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
ÓCCRA, 2003 213
EDI Message #
Element ID
Message #
Group Field Description Segment Element Message Text
C63 5004 100226Validation Group Identifier (Container)
NUMBER OF OCCURENCES EXCEEDS MAXIMUM
C64 5005 100226Validation Group Identifier (Cargo Record)
NUMBER OF OCCURENCES EXCEEDS MAXIMUM
C65 5006 100226Validation Group Identifier (Cargo Description)
NUMBER OF OCCURENCES EXCEEDS MAXIMUM
C74 5065 100226Validation Group Identifier (Ports)
NUMBER OF OCCURENCES EXCEEDS MAXIMUM
C75 5066 100226Validation Group Identifier (Containers)
NUMBER OF OCCURENCES EXCEEDS MAXIMUM
C76 5069 100226Validation Group Identifier (Consortium Partners)
NUMBER OF OCCURENCES EXCEEDS MAXIMUM
C79 5112 100226Validation Group Identifier (Seal)
NUMBER OF OCCURENCES EXCEEDS MAXIMUM
C88 1210 100227Validation Number of Containers Y2 1 INVALID NUMERIC FORMATC94 1608 100227Validation Containerized weight V2 7 INVALID NUMERIC FORMATC95 1612 100227Validation Number of Crew V2 16 INVALID NUMERIC FORMATC96 1617 100227Validation Non Containerized
WeightV2 9 INVALID NUMERIC FORMAT
C97 1622 100227Validation Number of Passengers V2 17 INVALID NUMERIC FORMATC98 1926 100227Validation Volume LO 6 INVALID NUMERIC FORMATC99 1929 100227Validation Lading Line Number LO 1 INVALID NUMERIC FORMATD01 1932 100227Validation Lading Quantity LO 8 INVALID NUMERIC FORMATD02 1934 100227Validation Weight LO 4 INVALID NUMERIC FORMATD08 2537 100227Validation Gross Registered Tons V2 5 INVALID NUMERIC FORMATD09 2543 100227Validation Net Registered Tons V2 3 INVALID NUMERIC FORMATD10 2549 100227Validation Summer Dead
Weight TonnageV2 11 INVALID NUMERIC FORMAT
D11 2550 100227Validation Ships Overall Length V2 14 INVALID NUMERIC FORMATD15 3344 100227Validation Generated Detail
ID Number INVALID NUMERIC FORMAT
D16 4400 100228Validation Date of Sailing V3 2 DEPARTURE DATE MUST BE LESS THAN ETA
D16 4400 100228Validation Sailing Date V3 2 DEPARTURE DATE MUST BE LESS THAN ETA
D17 1100 100232Key Carrier Code FUNCTION NOT VALID WHEN RELATED REQUESTS EXISTS
ÓCCRA, 2003 214
EDI Message #
Element ID
Message #
Group Field Description Segment Element Message Text
D18 4582 100233Validation Port of Arrival/Next Port of Discharge
V3 3 UNLOC NOT FOUND ON REFERENCE TABLE
D26 1442 100237Validation Seal Number M7 1 DECIMALS NOT VALID FOR ELEMENT VALUE
D28 4000 100237Validation Date of Arrival V3 4 DECIMALS NOT VALID FOR ELEMENT VALUE
D30 4007 100237Validation Safety Ship Expiry Date of Certificate
N9 4 DECIMALS NOT VALID FOR ELEMENT VALUE
D31 4008 100237Validation Safety Radio Expiry Date of Certificate
N9 4 DECIMALS NOT VALID FOR ELEMENT VALUE
D32 4009 100237Validation Safety Equipment Expiry Date of Certificate
N9 4 DECIMALS NOT VALID FOR ELEMENT VALUE
D33 4010 100237Validation Load Line Expiry Date of Certificate
N9 4 DECIMALS NOT VALID FOR ELEMENT VALUE
D34 4011 100237Validation Derat Expiry Date of Certificate
N9 4 DECIMALS NOT VALID FOR ELEMENT VALUE
D35 4012 100237Validation Maritime Declaration of Heath Expiry Date
N9 4 DECIMALS NOT VALID FOR ELEMENT VALUE
D36 4013 100237Validation Civil Liability for Oil Expiry Date
N9 4 DECIMALS NOT VALID FOR ELEMENT VALUE
D37 4081 100237Validation Notify Party Postal Code
N4 3 DECIMALS NOT VALID FOR ELEMENT VALUE
D38 4109 100237Validation Shipper Postal Code N4 3 DECIMALS NOT VALID FOR ELEMENT VALUE
D40 4151 100237Validation Consignee Postal Code N4 3 DECIMALS NOT VALID FOR ELEMENT VALUE
D45 4356 100237Validation Manifest From Customs Office
R4 3 DECIMALS NOT VALID FOR ELEMENT VALUE
D46 4357 100237Validation Manifest To Customs Office
R4 3 DECIMALS NOT VALID FOR ELEMENT VALUE
D49 4400 100237Validation Sailing Date V3 2 DECIMALS NOT VALID FOR ELEMENT VALUE
D49 4400 100237Validation Date of Sailing V3 2 DECIMALS NOT VALID FOR ELEMENT VALUED50 4401 100237Validation Registration Date
and TimeDTM 02-03 DECIMALS NOT VALID FOR
ELEMENT VALUED52 4507 100237Validation Shipping Line Postal
CodeN4 3 DECIMALS NOT VALID FOR
ELEMENT VALUED53 4520 100237Validation Ship's Agent Postal
CodeN4 3 DECIMALS NOT VALID FOR
ELEMENT VALUE
ÓCCRA, 2003 215
EDI Message #
Element ID
Message #
Group Field Description Segment Element Message Text
D54 4533 100237Validation Ship's Owner Postal Code
N4 3 DECIMALS NOT VALID FOR ELEMENT VALUE
D58 4601 100237Validation Consortium Partner Carrier Code
N1 4 DECIMALS NOT VALID FOR ELEMENT VALUE
D79 1210 100240Validation Number of Containers Y2 1 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
D81 1427 100240Validation Container Prefix ED 1 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
D82 1429 100240Validation Container Serial Number
ED 2 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
D83 1431 100240Validation Load/Empty Status ED 3 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
D86 1442 100240Validation Seal Number M7 1 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
D94 1607 100240Validation Voyage Number V1 4 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
D95 1608 100240Validation Containerized weight V2 7 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
D96 1609 100240Validation Containerized Weight Unit
V2 8 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
D97 1611 100240Validation Charter Type Code K1 1 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
D98 1612 100240Validation Number of Crew V2 16 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
D99 1617 100240Validation Non Containerized Weight
V2 9 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
E01 1618 100240Validation Non Containerized unit V2 10 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
E02 1622 100240Validation Number of Passengers
V2 17 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
E03 1627 100240Validation Free Format information
K1 2 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
E04 1628 100240Validation Transport Method V1 9 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
E05 1909 100240Validation Free Format Info K1 1 ELEMENT LENGTH EXCEEDS SIZE ALLOWEDE06 1924 100240Validation Weight Qualifier LO 5 ELEMENT LENGTH EXCEEDS
SIZE ALLOWEDE07 1926 100240Validation Volume LO 6 ELEMENT LENGTH EXCEEDS
SIZE ALLOWEDE08 1927 100240Validation Volume Qualifier LO 7 ELEMENT LENGTH EXCEEDS
SIZE ALLOWED
ÓCCRA, 2003 216
EDI Message #
Element ID
Message #
Group Field Description Segment Element Message Text
E09 1929 100240Validation Lading Line Number LO 1 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
E10 1932 100240Validation Lading Quantity LO 8 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
E111933 100240
Validation Lading Quantity Qualifier LO 9 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
E12 1934 100240Validation Weight LO 4 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
E13 1935 100240Validation Weight Unit Qualifier LO 11 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
E23 2455 100240Validation Place of Receipt of Goods, Country Code
R4 5 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
E24 2456 100240Validation Final Destination Location
R4 3 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
E25 2457 100240Validation Place of Receipt of Goods Name
R4 3 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
E29 2537 100240Validation Gross Registered Tons V2 5 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
E30 2538 100240Validation Weight Unit Qualifier V2 6 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
E31 2539 100240Validation Length Unit V2 15 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
E32 2540 100240Validation Lloyds Code V1 1 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
E33 2541 100240Validation Name of Master V2 13 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
E34 2543 100240Validation Net Registered Tons V2 3 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
E35 2544 100240Validation Weight Unit Qualifier V2 4 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
E36 2545 100240Validation Registry Number V2 2 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
E37 2547 100240Validation Place of Registry V2 1 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
E38 2548 100240Validation Weight Unit Qualifier V2 12 ELEMENT LENGTH EXCEEDS SIZE ALLOWEDE39 2549 100240Validation Summer Dead Weight
TonnageV2 11 ELEMENT LENGTH EXCEEDS
SIZE ALLOWEDE40 2550 100240Validation Ships Overall Length V2 14 ELEMENT LENGTH EXCEEDS
SIZE ALLOWEDE41 2551 100240Validation Name V1 2 ELEMENT LENGTH EXCEEDS
SIZE ALLOWED
ÓCCRA, 2003 217
EDI Message #
Element ID
Message #
Group Field Description Segment Element Message Text
E42 2553 100240Validation Nationality V1 3 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
E43 2640 100240Validation Lading Description L5 2 ELEMENT LENGTH EXCEEDSSIZE ALLOWED
E44 2644 100240Validation Marks and Numbers Description
L5 6 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
E49 2780 100240Validation Container Size/Type Y2 4 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
E53 2956 100240Validation Commodity Code Qualifier
L5 4 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
E54 3300 100240Validation Vessel Type Code V1 7 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
E55 3331 100240Validation Final Destination, Port Name
R4 4 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
E64 3344 100240Validation Generated Detail ID Number
ELEMENT LENGTH EXCEEDS SIZE ALLOWED
E67 4000 100240Validation Date of Arrival V3 4 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
E69 4007 100240Validation Safety Ship Expiry Date of Certificate
N9 4 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
E70 4008 100240Validation Safety Radio Expiry Date of Certificate
N9 4 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
E71 4009 100240Validation Safety Equipment Expiry Date of Certificate
N9 4 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
E72 4010 100240Validation Load Line Expiry Date of Certificate
N9 4 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
E73 4011 100240Validation Derat Expiry Date of Certificate
N9 4 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
E74 4012 100240Validation Maritime Declaration of Heath Expiry Date
N9 4 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
E75 4013 100240Validation Civil Liability for Oil Expiry Date
N9 4 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
E76 4077 100240Validation Notify Party Telephone Number
N3 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
E77 4078 100240Validation Notify Party Country N4 4 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
E78 4079 100240Validation Notify Party City Name N4 1 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
ÓCCRA, 2003 218
EDI Message #
Element ID
Message #
Group Field Description Segment Element Message Text
E79 4080 100240Validation Notify Party State/Prov Code
N4 2 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
E80 4081 100240Validation Notify Party Postal Code N4 3 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
E81 4082 100240Validation Notify Party Name N1 2 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
E82 4084 100240Validation Notify Party Address 1 N3 1 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
E83 4085 100240Validation Notify Party Address 2 N3 2 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
E84 4086 100240Validation Notify Party Address 3 N3 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
E85 4105 100240Validation Shipper Telephone Number
N3 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
E86 4106 100240Validation Shipper Country N4 4 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
E87 4107 100240Validation Shipper City Name N4 1 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
E88 4108 100240Validation Shipper State/Prov Code
N4 2 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
E89 4109 100240Validation Shipper Postal Code N4 3 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
E90 4110 100240Validation Shipper Name N1 2 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
E91 4112 100240Validation Shipper Address 1 N3 1 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
E92 4113 100240Validation Shipper Address 2 N3 2 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
E93 4114 100240Validation Shipper Address 3 N3 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
F04 4147 100240Validation Consignee Telephone Number
N3 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
F05 4148 100240Validation Consignee Country N4 4 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
F06 4149 100240Validation Consignee City Name N4 1 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
F07 4150 100240Validation Consignee State/Prov Code
N4 2 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
F08 4151 100240Validation Consignee Postal Code N4 3 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
ÓCCRA, 2003 219
EDI Message #
Element ID
Message #
Group Field Description Segment Element Message Text
F09 4152 100240Validation Consignee Name N1 2 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
F10 4154 100240Validation Consignee Address 1 N3 1 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
F11 4155 100240Validation Consignee Address 2 N3 2 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
F12 4156 100240Validation Consignee Address 3 N3 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
F53 4356 100240Validation Manifest From Customs Office
R4 3 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
F54 4357 100240Validation Manifest To Customs Office
R4 3 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
F57 4364 100240Validation Carrier Code + Report Number
N9 2 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
F59 4400 100240Validation Date of Sailing V3 2 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
F59 4400 100240Validation Sailing Date V3 2 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
F60 4401 100240Validation Registration Date and Time
DTM 02-03 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
F62 4503 100240Validation Shipping Line Telephone Number
N3 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
F63 4504 100240Validation Shipping Line Country
N4 4 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
F64 4505 100240Validation Shipping Line City Name
N4 1 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
F65 4506 100240Validation Shipping Line State/Prov Code
N4 2 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
F66 4507 100240Validation Shipping Line Postal Code
N4 3 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
F67 4508 100240Validation Shipping Line Name N1 2 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
F69 4510 100240Validation Shipping Line Address 1
N3 1 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
F70 4511 100240Validation Shipping Line Address 2 N3 2 ELEMENT LENGTH EXCEEDS SIZE ALLOWEDF71 4512 100240Validation Shipping Line
Address 3N3 ELEMENT LENGTH EXCEEDS
SIZE ALLOWEDF72 4516 100240Validation Ship's Agent
Telephone NumberN3 ELEMENT LENGTH EXCEEDS
SIZE ALLOWEDF73 4517 100240Validation Ship's Agent Country N4 4 ELEMENT LENGTH EXCEEDS
SIZE ALLOWED
ÓCCRA, 2003 220
EDI Message #
Element ID
Message #
Group Field Description Segment Element Message Text
F74 4518 100240Validation Ship's Agent City Name N4 1 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
F75 4519 100240Validation Ship's Agent State/Prov Code
N4 2 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
F76 4520 100240Validation Ship's Agent Postal Code
N4 3 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
F77 4521 100240Validation Ship's Agent Name N1 2 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
F79 4523 100240Validation Ship's Agent Address 1
N3 1 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
F80 4524 100240Validation Ship's Agent Address 2
N3 2 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
F81 4525 100240Validation Ship's Agent Address 3
N3 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
F82 4529 100240Validation Ship's Owner Telephone Number
N3 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
F83 4530 100240Validation Ship's Owner Country
N4 4 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
F84 4531 100240Validation Ship's Owner City Name
N4 1 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
F85 4532 100240Validation Ship's Owner State/Prov Code
N4 2 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
F86 4533 100240Validation Ship's Owner Postal Code
N4 3 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
F87 4534 100240Validation Ship's Owner Name
N1 2 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
F89 4536 100240Validation Ship's Owner Address 1
N3 1 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
F90 4537 100240Validation Ship's Owner Address 2
N3 2 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
F91 4538 100240Validation Ship's Owner Address 3
N3 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
G18 4581 100240Validation Current Port of Loading
V3 1 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
G19 4582 100240Validation Port of Arrival/Next Port of Discharge
V3 3 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
G20 4583 100240Validation Port Code R4 4 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
G21 4587 100240Validation Consortium Partner Name N1 2 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
ÓCCRA, 2003 221
EDI Message #
Element ID
Message #
Group Field Description Segment Element Message Text
G22 4601 100240Validation Consortium Partner Carrier Code
N1 4 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
G24 4610 100240Validation Terminal Name R4 6 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
G25 4612 100240Validation Pier Number R4 7 ELEMENT LENGTH EXCEEDS SIZE ALLOWED
G28 4000 100241Validation Date of Arrival V3 4 ELEMENT LENGTH IS BELOW SIZE ALLOWED
G30 4356 100241Validation Manifest From Customs Office
R4 3 ELEMENT LENGTH IS BELOW SIZE ALLOWED
G31 4357 100241Validation Manifest To Customs Office
R4 3 ELEMENT LENGTH IS BELOW SIZE ALLOWED
G39 1210 100244Validation Number of Containers Y2 1 ELEMENT EXCEEDS ALLOWED DECIMAL POSITIONS
G43 1608 100244Validation Containerized weight V2 7 ELEMENT EXCEEDS ALLOWED DECIMAL POSITIONS
G44 1617 100244Validation Non Containerized Weight
V2 9 ELEMENT EXCEEDS ALLOWED DECIMAL POSITIONS
G45 1926 100244Validation Volume LO 6 ELEMENT EXCEEDS ALLOWED DECIMAL POSITIONS
G46 1932 100244Validation Lading Quantity LO 8 ELEMENT EXCEEDS ALLOWED DECIMAL POSITIONS
G47 1934 100244Validation Weight LO 4 ELEMENT EXCEEDS ALLOWED DECIMAL POSITIONS
G52 2537 100244Validation Gross Registered Tons V2 5 ELEMENT EXCEEDS ALLOWED DECIMAL POSITIONS
G53 2543 100244Validation Net Registered Tons V2 3 ELEMENT EXCEEDS ALLOWEDDECIMAL POSITIONS
G54 2549 100244Validation Summer Dead Weight Tonnage
V2 11 ELEMENT EXCEEDS ALLOWED DECIMAL POSITIONS
G55 2550 100244Validation Ships Overall Length V2 14 ELEMENT EXCEEDS ALLOWED DECIMAL POSITIONS
G65 4000 100259Validation Date of Arrival V3 4 FIELD HAS INVALID TIMESTAMP FORMAT
X01 7999 100003 DATE IS INVALIDX02 7999 100010 FIELD IS MANDATORYX03 7999 100012 FIELD MUST BE Y OR NX04 7999 100016 ETA DATE CANNOT BE MORE
THAN 30 DAYSX05 7999 100018 DUPLICATE FIELD
ÓCCRA, 2003 222
EDI Message #
Element ID
Message #
Group Field Description Segment Element Message Text
X06 7999 100025 DUPLICATE REQUEST FOUNDX07 7999 100028 FIELD MUST BE NUMERICX08 7999 100029 FIELD HAS INVALID DATE
FORMATX09 7999 100030 FIELD EXCEEDS THE MAXIMUMX10 7999 100031 FIELD EXCEEDS ALLOWED
DECIMAL POSITIONSX11 7999 100044 FIELD IS NOT FOUNDX12 7999 100053 FIELD IS NOT VALIDX13 7999 100060 FIELD IS MANDATORY IF
&02 EXISTS
X14 7999 100062 NUMBER OF REQUESTS EXCEEDS MAXIMUM
X15 7999 100063 BLANKS NOT ALLOWEDX16 7999 100067 BLANK NOT ALLOWED IN
FIRST POSITION OF INPUT FIELDX17 7999 100080 REQUEST NUMBER MUS
PASS CHECK DIGITX18 7999 100087 REQUEST NUMBER MUST HAVE
LOCAL SECURITY VALID FOR OFFICEX19 7999 100091 DATA MUST BE NUMERICX20 7999 100101 INVALID CLIENT IDX21 7999 100116 REQUEST MUST EXIST ON FILEX22 7999 100134 INVALID STATUS OF REQUESTX23 7999 100136 PORT OF REPORT MUST
BE A PORT OFFICEX24 7999 100137 PORT OF DESTINATION MUST
BE A PORT OFFICEX25 7999 100138 PORT OF RELEASE MUST
BE A PORT OFFICEX26 7999 100141 ACCOUNT SECURITY NUMBER OF THE REQUEST ON
THE CHANGE MUSTMATCH THE ACCOUNTX27 7999 100142 ESTIMATED DATE OF ARRIVAL MUST BE
LESS THAN CURRENT BUSINESS DATEX28 7999 100143 PRE-AUTH NUMBER MUST BE
EFFECTIVE FOR SERVICE OPTIONX29 7999 100144 PRE-AUTH NUMBER MUST BE VALID
FOR PORT OF RELEASEX30 7999 100146 OFFICE MUST BE AUTOMATED
ÓCCRA, 2003 223
EDI Message #
Element ID
Message #
Group Field Description Segment Element Message Text
FOR REQUEST TYPEX31 7999 100147 INVALID ACCOUNT SECURITY
NUMBERX32 7999 100148 BLANKET PERMIT PROCESSING
NOT ALLOWEDX33 7999 100150 AQ NOT VALID, RELEASE NOT
ON FILE
X34 7999 100152 REQUEST NUMBER MUST BE ON FILE
X35 7999 100153 CCN MUST BE ON FILEX36 7999 100154 REGISTERED TONNAGE
CANNOT BE GREATER THAN GROSS REGISTERED TONNAGE
X37 7999 100156 DEPARTURE DATE CANNOT BE GREATERTHAN EXPIRY DATE
X38 7999 100157 FIELD AND UOM MUST BE ENTERED TOGETHER
X39 7999 100161 REPORT DATE MUST BE LESS THAN OREQUAL TO CURRENT BUSINESS DATE
X40 7999 100162 CCN MUST BE PROVIDEDX41 7999 100163 CLIENT NOT VALID FOR
SERVICE OPTIONX42 7999 100164 FUTURE EFFECTIVE DATE I
S GREATER THAN ALLOWABLEX43 7999 100166 DUPLICATE CODES NOT
ALLOWEDX44 7999 100175 OFFICE IS NOT AUTOMATED
FOR REQUEST TYPEX45 7999 100176 INVALID CLIENT TYPE FOR
THIS REQUEST TYPEX46 7999 100177 SERVICE OPTION NOT VALID FOR OFFICEX47 7999 100183 COMMODITY CODE MUST BE
AT LEAST 6 CHARACTERSX48 7999 100184 STATE CODE IS APPLICABLE
COUNTRY CODE OF 'US'X49 7999 100185 COMMODITY NOT VALID FOR
SERVICE OPTIONX50 7999 100189 FIELD IS FUTURE DATED.X51 7999 100193 NOT AUTHORIZED FOR FIELD
ÓCCRA, 2003 224
EDI Message #
Element ID
Message #
Group Field Description Segment Element Message Text
X52 7999 100205 CCN EXISTS FOR AUTOMOTIVE RELEASE
X53 7999 100215 AQ EXISTS - CANNOT CANCEL RELEASE
X54 7999 100226 NUMBER OF OCCURENCES EXCEEDS MAXIMUM
X55 7999 100227 INVALID NUMERIC FORMATX56 7999 100228 DEPARTURE DATE MUST
BE LESS THAN ETAX57 7999 100230 EDI CHANGES NOT ACCEPTED
AFTER ARRIVALX58 7999 100231 EDI CHANGES NOT ACCEPTED
AFTER ETAX59 7999 100232 FUNCTION NOT VALID WHEN
RELATED REQUESTS EXISTSX60 7999 100233 UNLOC NOT FOUND ON
REFERENCE TABLEX61 7999 100235 REQUEST ID MUST BE CARGO
REQUESTX62 7999 100236 PORT OF DESTINATION MUST
EQUAL RELATED REQUESTX63 7999 100237 DECIMALS NOT VALID FOR
ELEMENT VALUEX64 7999 100240 ELEMENT LENGTH EXCEEDS
SIZE ALLOWEDX65 7999 100241 ELEMENT LENGTH IS BELOW
SIZE ALLOWEDX66 7999 100243 ELEMENT VALUE IS LESS
THAN ALLOWEDX67 7999 100244 ELEMENT EXCEEDS ALLOWED
DECIMAL POSITIONSX68 7999 100251 INVALID INDICATOR VALUE FOR
THE ELEMENT VALUEX69 7999 100252 INFO ELEMENT NOT VALID
FOR YOUR PROCESSX70 7999 100259 FIELD HAS INVALID
TIMESTAMP FORMATX71 7999 100262 ELEMENT VALUE HAS FAILED
THE &01 EDITX72 7999 100268 RELEASE DATE CANNOT BE PRIOR
TO ORIGINAL RELEASE DATE
ÓCCRA, 2003 225
EDI Message #
Element ID
Message #
Group Field Description Segment Element Message Text
X73 7999 100273 LVS INDICATOR MUST BE SPACES
X74 7999 100276 INVALID PCCN FOR CCNX75 7999 100278 FUNCTION INVALID IN
CURRENT MODEX76 7999 100306 AQ ADJUST NOT VALID –
RELEASE IS REJECTEDX77 7999 100309 PREVIOUS CARGO NUMBER
CANNOT EQUAL REQUEST IDX78 7999 100312 REQUEST ID INVALIDX79 7999 100313 ARRIVAL NOT VALID FOR
THIS SERVICE OPTIONX80 7999 100318 FIELD CANNOT BE GREATER
THAN CURRENT DATEX81 7999 100340 EDI CHANGES NOT ACCEPTED
AFTER RELEASEX82 7999 100341 RELEASE INCOMPATIBLE WITH
RELATED AQ 1107 100053Validation Carrier Code N9 2 FIELD IS INVALID 1107 100053 Carrier Code/Supplementary Carrier
CodeN9 2
FIELD IS INVALID
2573
100010Validation Estimated Date and Time of
Loading DTM 2/3FIELD IS MANDATORY
2571 NewValidation Supplementary Data Required
IndicatorN9 2 SUPPLEMENTARY CARGO REPORT ON FILE,
SUPPLEMENTARY DATA REQUIRED INDICATOR IS N.
2571 100053Validation Supplementary Data Required
IndicatorN9 2
FIELD IS INVALID
New New
Validation Port of Departure V3 3PORT OF DEPARTURE MUST BE THE SAME AS ONE OF THE PORTS OF CALL
4610 100053Validation Terminal Name R4 6 FIELD IS MANDATORY
4582 New
Validation Port of Arrival V3 3PORT OF ARRIVAL MUST BE THE SAME AS ONE OF THE PORTS OF CALL
4610 100053Validation Terminal Name FIELD IS MANDATORY 4108 100010Validation Shipper State/Prov Code N4 2 FIELD IS MANDATORY 4150 100010Validation Consignee State/Prov Code N4 2 FIELD IS MANDATORY 4080 100010Validation Notify Party State/Prov Code N4 2 FIELD IS MANDATORY 2687 100010Validation Delivery Address State/Prov Code N4 2 FIELD IS MANDATORY 4108 100053Validation Shipper State/Prov Code N4 2 FIELD IS INVALID 4150 100053Validation Consignee State/Prov Code N4 2 FIELD IS INVALID
ÓCCRA, 2003 226
EDI Message #
Element ID
Message #
Group Field Description Segment Element Message Text
4080 100053Validation Notify Party State/Prov Code N4 2 FIELD IS INVALID 2687 100053Validation Delivery Address State/Prov Code N4 2 FIELD IS INVALID
New New
Validation Port of Loading V3 1PORT OF LOADING MUST BE THE SAME AS THE PORT OF EXIT
4582 New
Validation Port of Arrival V3 3PORT OF ARRIVAL MUST BE THE SAME AS THE PORT OF REPORT
4582 New
Validation Port of Arrival V3 3PORT OF ARRIVAL MUST BE THE SAME AS THE PORT OF REPORT
2696 100010Validation Delivery Contact Name FIELD IS MANDATORY New NewValidation Port of Departure V3 3 FIELD MUST BE THE SAME AS ONE PORT OF CALL 4582 NewValidation Port of Arrival V3 3 FIELD MUST BE THE SAME AS ONE PORT OF CALL
2708 100053
ValidationPrevious Cargo Control Number (PCCN) N9 2 FIELD IS INVALID
1103 New
ValidationSupplementary Reference Number N9 2 FIELD CANNOT BE RELATED TO A RELEASE TYPE REQUEST
1103 New
ValidationCargo Control Number (CCN) (Empty) N9 2 FIELD CANNOT BE RELATED TO A RELEASE TYPE REQUEST
4583 New
Validation Port of Call R4 4LAST FOREIGN PORT OF DEPARTURE AND FIRST CANADIAN PORT OF ARRIVAL ARE BOTH REQUIRED
4365 NewValidation Original CCN N9 2 PRIME CARGO REPORT INDICATES NO SUPPLEMENTARY
DATA IS REQUIRED.
1103 100053
ValidationSupplementary Reference Number N9 2 FIELD IS INVALID
4109 100010Validation Shipper Postal/Zip Code N4 3 FIELD IS MANDATORY 4151 100010Validation Consignee Postal/Zip Code N4 3 FIELD IS MANDATORY 4081 100010Validation Notify Party Postal/Zip Code N4 3 FIELD IS MANDATORY 2688 100010Validation Delivery Address Postal/Zip Code N4 3 FIELD IS MANDATORY 4109 100053Validation Shipper Postal/Zip Code N4 3 FIELD IS INVALID 4151 100053Validation Consignee Postal/Zip Code N4 3 FIELD IS INVALID 4081 100053Validation Notify Party Postal/Zip Code N4 3 FIELD IS INVALID 2688 100053Validation Delivery Address Postal/Zip Code N4 3 FIELD IS INVALID
2708 New
ValidationPrevious Cargo Control Number (PCCN) N9 2
ONLY ONE OF PCCN OR ASSOCIATED TRANSPORT DOCUMENT # IS MANDATORY
2707 New
ValidationAssociated Transport Document Number N9 2
ONLY ONE OF PCCN OR ASSOCIATED TRANSPORT DOCUMENT # IS MANDATORY
2708 New
ValidationPrevious Cargo Control Number (PCCN) N9 2
EITHER PCCN OR ASSOCIATED TRANSPORT DOCUMENT # IS MANDATORY
2707 New
ValidationAssociated Transport Document Number N9 2
EITHER PCCN OR ASSOCIATED TRANSPORT DOCUMENT # IS MANDATORY
1103 100053Key Supplementary Cargo Report N9 2 FIELD IS INVALID
ÓCCRA, 2003 227
EDI Message #
Element ID
Message #
Group Field Description Segment Element Message Text
Number
1103100053
KeySupplementary Cargo Report Number
N9 2FIELD IS INVALID
2700
100053ValidationContainer Prefix/Container Serial Number ED 1/2 FIELD IS INVALID
2700
100053ValidationContainer Prefix/Container Serial Number ED 1/2 FIELD IS INVALID
4365 100053Validation Original CCN N9 2 FIELD IS INVALID
1103 100053
Validation
Cargo Control Number, Supplementary Reference Number, or Conveyance Report Number N9 2 FIELD IS INVALID
2708 100053
ValidationPrevious Cargo Control Number (PCCN) N9 2 FIELD IS INVALID
1103 100324Key Conveyance Report Number N9 2 INVALID STATUS OF RELATED REQUEST
Description of Goods - Insufficient OFFICER REMARKS
Consignee - Insufficient OFFICER REMARKS
Shipper - Insufficient OFFICER REMARKS
Delivery Address - Insufficient OFFICER REMARKS
Notify Party - Insufficient OFFICER REMARKS
Supplementary Report - Insufficient OFFICER REMARKS
Supplementary Report – Not Submitted
OFFICER REMARKS
Receipt Place / Location / Port / Country - Incorrect
OFFICER REMARKS
Port of Loading - Incorrect OFFICER REMARKSPort of Arrival - Incorrect OFFICER REMARKS
Failure to Provide Documentation OFFICER REMARKS
Not Authorized OFFICER REMARKS
Wait for Further Instructions OFFICER REMARKS
ÓCCRA, 2003 228
EDI Message #
Element ID
Message #
Group Field Description Segment Element Message Text
ÓCCRA, 2003 229
APPENDIX G – ADDITIONAL INFORMATION
Recommended Reading
The following documents contain information related to the ACI-EDI Reporting project. These documents were referenced in part for the creation of the PRD and as related documentation sent to clients during the consultation process.
Smart Border Declarationhttp://www.dfait-maeci.gc.ca/can-am/menu-en.asp?mid=1&cat=10
Action Plan #14 Harmonized Commercial Processinghttp://www.canadianembassy.org/border/actionplan-en.asp
US Customs (BCBP) CSIhttp://www.customs.ustreas.gov/xp/cgov/import/cargo_control/csi/ http://www.customs.ustreas.gov/xp/cgov/import/carriers/24hour_rule/
Customs Blueprinthttp://www.ccra-adrc.gc.ca/customs/general/blue_print/blueprint-e.html became this: http://www.ccra-adrc.gc.ca/customs/general/blue_print/menu-e.html relates to CUSTOMS ACTION PLAN: http://www.ccra-adrc.gc.ca/agency/business_plans/2003/challenges-e.html
ÓCCRA, 2003 231