Upload
tranhanh
View
215
Download
0
Embed Size (px)
Citation preview
Achieve Ultimate Performance on Tungsten CarbideNEW Norton Paradigm peel and pinch diamond grinding wheels attain the longest life, most consistent power draw, and fastest cut rate – to produce exceptional finished tools.
FeATUres & BeneFiTs ❚ High grain retention ensures long life ❚ Low specific energy delivers faster cut rate
❚ Self-sharpening abrasive design promotes consistent power draw ❚ Truable online and offline for maximum productivity
#8,715,381
ScaN thiS QR codE With youR SmaRtPhoNE to SEE a DemonsTrATion ViDeo
OnLine Truing & DreSSing CapabiLiTy LOwer TOOLing COST | beTTer eDge QuaLiTy
diamoNd WhEElS foR PEEl aNd PiNch GRiNdiNG
roUnD Tool GrinDinG
This document is provided solely for the purpose of proofing and is not to be considered the final artwork.
diamoNd WhEElS foR PEEl aNd PiNch GRiNdiNG
mADe-To-orDer AVAilABiliTyall norton paradigm diamond wheels are made to your precise requirements.
norton paradigm wheels are available up to 16" in diameter in many peel and pinch wheel shapes including 1b1, 1M1, 3b9, and 3M9.
GenerAl APPliCATion PArAmeTerswheel Speed: 12,000-19,500 SFpMinfeed rate: up to ½" per minutepart Speed: 200-1,000 rpMDepth of Cut: up to 0.100"Truing/Dressing parameters:
norton paradigm peel and pinch wheels may be trued with an 80 to150 grit silicon carbide truing wheel. For optimal results the truing wheel should be run 3 to 8X faster than the paradigm wheel.
Coolant: neat oil
DiAmonD sTArTinG sPeCiFiCATions For TUnGsTen CArBiDeThese wheel specifications may be used in a pinch or peel set-up. norton paradigm wheels are used only as the roughing wheel in a pinch set-up. and the only wheel in a peel set-up. SD220-i176-p100CSD320C-H176-p100CSD320-H176-p100C
Case study – CarbideApplicAtion: blank prep 18mm drillsMAchine: 4-axis CnC OD grindernorton product: 3b9p
10" x 0.8" x 1-1/4" norton paradigm SD320-H176-p100C
incuMbent product: 220 grit diamond hot-press metal bondresults: The norton paradigm wheel showed 2.5X wheel life
due to greater corner holding capability.
INCUMBENT
GRAM
S
NORTON PARADIGM
MATERIAL REMOVED BEFORE RETRUE
010,00020,00030,00040,00050,00060,00070,00080,00090,000
priOr TO OrDer enTry, pLeaSe COnTaCT yOur nOrTOn repreSenTaTive FOr SpeCiFiCaTiOn reCOMMenDaTiOnS TO enSure MaXiMuM grinDing perFOrManCe, QuOTaTiOnS, anD CurrenT LeaD-TiMeS.
norton Paradigm 320 grit Traditional metal Bond 320 grit
The Paradigm shift increase productivity/decrease costs: ❚ up to 46% porosity ❚ + > 2:1 diamond to bond ratio ❚ + metal matrix forms an ionic bond with the diamond particles ❚ + finer grits and more working particles with higher exposure ❚ = lower cutting energies with highest quality part edges and finish
www.facebook.com/nortonindustrial | www.youtube.com/nortonindustrial | www.nortonindustrial.com
UsA CUsTomer serViCe:Toll Free phone: 1 (800) 551-4413Toll Free Fax: 1 (800) 551-4416
CAnADA CUsTomer serViCe:Toll Free phone: 1 (800) 263-6565Toll Free Fax: 1 (800) 561-9490
Form #8457 © Saint‑Gobain august 2014.Norton, G‑force, and Paradigm are registered trademarks; a Paradigm Shift in cutting tool manufacturing is a trademark of Saint‑Gobain abrasives.
PRimaRy SPoNSoR
BesT nOrTOn paradigm
BeTTer nOrTOn g-Force
GooD nOrTOn b610 / b80
This document is provided solely for the purpose of proofing and is not to be considered the final artwork.