STER

EOLITH

OGRAPH

Y Accura® 25 Plastic

Simulate the properties and aesthetics of polypropylene and ABSwith this accurate and flexible material.

Accura® 25 Plastic produces durable prototypes that are ideally suited for automotive design

verification and functional testing.

Applications• Functional components for assemblies and mock-ups for: · Automotive styling parts — trim, fascia, and other components · Consumer electronic components · Toys · Snap fit assemblies• Master patterns for RTV/silicone molding• Replace CNC machining of polypropylene and ABS to produce short-run plastic parts• Simulate injection molded parts• Concept and marketing models

Features

Benefits

• Look and feel of molded polypropylene• High flexibility with excellent shape retention• Outstanding feature resolution and accuracy• High production speed• Fully developed and tested build styles

• Increased market opportunities for models• Reliable and robust functional prototypes• Suitable for master patterns• More parts and better system utilization• Maximize reliability with no user R&D

Accura® 25 Plastic has high flexibility, while retaining the original shape.

Automotive styling part.

Liquid Material

Appearance White

Liquid Density @ 25 °C (77 °F) 1.13 g/cm³

Solid Density @ 25 °C (77 °F) 1.19 g/cm³

Viscosity @ 30 °C (86 °F) 250 cps

Penetration Depth (Dp)* 4.2 mils

Critical Exposure(Ec)* 10.5 mJ/cm2

Tested Build Styles EXACT™, FAST™, EXACT™ HR

STER

EOLITH

OGRAPH

Y

For use with solid-state stereolithography (SLA®) Systems

Technical Data

Post-Cured Material

Tensile Strength ASTM D 638 38 MPa 5,540 - 5,570 PSI

Tensile Modulus ASTM D 638 1590-1660 MPa 230 - 240 KSI

Elongation at Break (%) ASTM D 638 13 - 20 % 13 - 20 %

Flexural Strength ASTM D 790 55 - 58 MPa 7,960 - 8,410 PSI

Flexural Modulus ASTM D 790 1,380 - 1,660 MPa 200 - 240 KSI

Impact Strength (Notched Izod) ASTM D 256 19 - 24 J/m 0.4 ft-lb/in

Heat Deflection Temperature ASTM D 648@ 66 PSI

@ 264 PSI58 - 63 °C51 - 55 °C

136 - 145 °F124 - 131 °F

Hardness, Shore D 80 80

Co-Effcient of Thermal Expansion ASTM E 831-93 TMA (T<Tg, 0-20 °C) 107 x 10-⁶ m/m-°C TMA (T<Tg, 75-140 °C) 151 x 10-⁶ m/m-°C

Glass Transition (Tg) DMA, E” 60 °C 140 °F

3D Systems Corporation Tel: +1 803.326.4080 moreinfo@3dsystems.com333 Three D Systems Circle Toll-free: 800.889.2964 www.3dsystems.comRock Hill, SC 29730 U.S.A. Fax: +1 803.324.8810 NASDAQ: TDSC

Warranty/Disclaimer: The performance characteristics of these products may vary according to product application, operating conditions, material combined with, or with end use. 3D Systems makes no warranties of any type, express or implied, including, but not limited to, the warranties of merchantability or fitness for a particular use.© 2008 by 3D Systems, Inc. All rights reserved. Specifications subject to change without notice. EXACT and FAST are trademarks, and the 3D logo, Accura and SLA are registered trademarks of 3D Systems, Inc.

PN 70668 Issue Date - April 08

“Accura® 25 simulates the properties

of a durable plastic in the range of

polypropylene to low end ABS. The

combination of its mechanical prop-

erties and its visual similarity to an

injection molded plastic has led many

of our customers to adopt Accura® 25

as their choice material for all models,

unless otherwise specified. We have

used it for customer applications

ranging from durable enclosures and

snap fit assemblies, to replacement

parts for CNC machined delrin®. We

have even had a few clients success-

fully use Accura® 25 parts as their

production material for low volume

applications. The properties and

aesthetics make Accura® 25 the go-to

resin for almost any application.”

Todd Reese, President Realize Inc.

Accura® 25 Plastic

Measurement Condition Metric U.S.

Measurement Condition Value

* Dp/Ec values are the same on all systems.

TM

STER

EOLITH

OGRAPH

Y Accura® 55 Plastic

Simulate the look and feel of molded ABS with this tough and versatile plastic.

Cordless drill prototype for future assembly testing.

Applications• Automotive interior components

• Short-run production parts

• Electronic components

• Testing of functional assemblies

• Rigid and durable functional proto types

• Concept and marketing models

• Accurate, durable master patterns for urethane casting

Features

Benefits

• Durable and rigid material

• Look and feel of molded ABS

• High accuracy with less distortion

• High production speed

• Low viscosity formulation

• Fully developed and tested build styles

• Produce ABS-like parts without molding or machining• Increase market opportunities and acceptance for models • Parts produced within tolerance and faithful to CAD data• Increase system throughput• Minimize part cleaning and finish ing labor• Maximize reliability with no user R&D

Automotive door component.

Spa water jet prototypes.

Liquid Material

Appearance White

Liquid Density @ 25 °C (77 °F) 1.13 g/cm³

Solid Density @ 25 °C (77 °F) 1.20 g/cm³

Viscosity @ 30 °C (86 °F) 155 - 185 cps

Penetration Depth (Dp)* 5.2 mils

Critical Exposure(Ec)* 7.4 mJ/cm²

Tested Build Styles EXACT™, FAST™, EXACT™ HR

STER

EOLITH

OGRAPH

Y

For use with solid-state stereolithography (SLA®) Systems

Technical Data

Post-Cured Material

Tensile Strength ASTM D 638 63 - 68 MPa 9,200 - 9,850 PSI

Tensile Modulus ASTM D 638 3,200 - 3,380 MPa 460 - 490 KSI

Elongation at Break (%) ASTM D 638 5 - 8 % 5 - 8 %

Flexural Strength ASTM D 790 88 - 110 MPa 12,830 -15,920 PSI

Flexural Modulus ASTM D 790 2,690 - 3,240 MPa 390 - 470 KSI

Impact Strength (Notched Izod) ASTM D 256 12 - 22 J/m 0.2 - 0.4 ft-lb/in

Impact Strength (Notched Izod) ASTM D 5420 1.1 J 0.81 ft - lbs

Heat Deflection Temperature ASTM D 648@ 66 PSI

@ 264 PSI55 - 58 °C51 - 53 °C

131 - 136 °F123 - 127 °F

Hardness, Shore D 85 85

Co-Effcient of Thermal Expansion ASTM E 831-93TMA (T<Tg, 0-40 °C)

TMA (T<Tg, 75-140 °C)61 x µm/m -°C163 µm/m -°C

141 µin/in - °F326 µin/in - °F

Glass Transition (Tg) DMA, E” 56 °C 132°F

3D Systems Corporation Tel: +1 803.326.4080 moreinfo@3dsystems.com333 Three D Systems Circle Toll-free: 800.889.2964 www.3dsystems.comRock Hill, SC 29730 U.S.A. Fax: +1 803.324.8810 NASDAQ: TDSC

Warranty/Disclaimer: The performance characteristics of these products may vary according to product application, operating conditions, material combined with, or with end use. 3D Systems makes no warranties of any type, express or implied, including, but not limited to, the warranties of merchantability or fitness for a particular use.© 2008 by 3D Systems, Inc. All rights reserved. Specifications subject to change without notice. EXACT and FAST are trademarks, and the 3D logo, Accura and SLA are registered trademarks of 3D Systems, Inc.

PN 70717 Issue Date - April 08

“Accura® 55 has proven to be an

excellent resin for Harvest. Its low

viscosity allows us to clean and finish

parts more easily. Couple that with a

high build success rate and the result

is greater production efficiency and

higher quality parts. Additionally,

the mechanical properties allow the

models to serve as functional proto-

types that better meet the needs of our

customers.”

Jason Morgan, Stereolithography

Production ManagerHarvest Technologies

Accura® 55 Plastic

Measurement Condition Metric U.S.

Measurement Condition Value

* Dp/Ec values are the same on all solid-state laser SLA® Systems.

Durable and rigid testing.

Look and feel of molded ABS.

TM

STER

EOLITH

OGRAPH

Y Accura® ClearVue™ Material

Applications Benefits• Thehighestclarityandtransparency

• Durableandstrong

• Humidityandmoisturestable

• USPclassVIcapable

• Generalpurposeprototyping

• Modelsrequiringhighclarity

• Headlampsandlenses

• Fluidflowandvisualizationmodels

• Transparentassemblies

• Snapfitsandcomplexassemblies

• Medicalmodelsandmedicaldevices

Simulate the properties and appearance of Polycarbonate and ABS with this durable clear plastic.

Liquid Material

Appearance Clear/Transparent

LiquidDensity @25°C(77°F) 1.1g/cm3at25°C

SolidDensity @25°C(77°F) 1.17g/cm3at25°C

Viscosity @30°C(86°F) 235-260cps

PenetrationDepth(Dp) 6.1mils

CriticalExposure(Ec) 9.5mJ/cm2

STER

EOLITH

OGRAPH

Y

Forusewithsolid-statestereolithography(SLA®)Systems

TechnicalData

Post-Cured Material

TensileStrength ASTMD638 46-53MPa 6,700-7,700PSI

TensileModulus ASTMD638 2,270-2,640MPa 329-383KSI

ElongationatBreak(%) ASTMD638 3-15% 3-15%

FlexuralStrength ASTMD790 72-84MPa 10,400-12,200PSI

FlexuralModulus ASTMD790 1,980-2,310MPa 287-335KSI

ImpactStrength(IzodNotched) ASTMD256 40-58J/m 0.70-1.1ft-lb/in

HeatDeflectionTemperature ASTMD648@66PSI@264PSI

51°C50°C

124°F122°F

Hardness,ShoreD 80 80

Co-efficientofThermalExpansion ASTME831-9325-50°C50-100°C

122μm/m-°C155μm/m-°C

68μin/in-°F86μin/in-°F

GlassTransition(Tg) DMA,E” 62°C 144°F

WaterAbsorption ASTMD570-98 0.3% 0.3%

3DSystemsCorporation Tel:+1803.326.4080 moreinfo@3dsystems.com333ThreeDSystemsCircle Toll-free:800.889.2964 www.3dsystems.comRockHill,SC29730U.S.A. Fax:+1803.324.8810 NYSE:DDD

Warranty/Disclaimer:The performance characteristics of these productsmay vary according to product application, operating conditions, orwith end use.3DSystemsmakesnowarrantiesofanytype,expressorimplied,including,butnotlimitedto,thewarrantiesofmerchantabilityorfitnessforaparticularuse.©2011by3DSystems,Inc.Allrightsreserved.Specificationssubjecttochangewithoutnotice.ClearVue,iProandthe3DlogoaretrademarksandAccura,ViperandSLAareregisteredtrademarksof3DSystems,Inc.

PN70740IssueDate-Nov2011

Accura® ClearVue™ Material

Measurement Condition Metric U.S.

Measurement Condition Value

TM

Ultra tough white plastic to replace CNC Machined polypropylene and ABS articles

• Exceptionallytoughanddurable

• Resistsbreakageandhandles challengingfunctionalassemblies

• Greatforsnapfits,assembliesanddemanding applications

• Idealformasterpatternsforvacuumcasting

Accura® Xtreme™ White 200 Plastic

Technical DataPost-Cured Material

Low High Low High

Tensile Strength (MPa/PSI) ASTM D 638 45 50 6530 7250

Tensile Modulus (MPa/KSI) ASTM D 638 2300 2630 334 381

Elongation at Break ASTM D 638 7% 20% 7% 20%

Flexural Strength (MPa/PSI) ASTM D 790 75 79 10880 11460

Flexural Modulus(MPa/KSI) ASTM D 790 2350 2550 341 370

Impact Strength (J/m /Ft-lbs/in) ASTM D 256 55 66 1.03 1.24

Heat Deflection ASTM D 648@ 66 PSI

@ 264 PSI47°C42°C

117°F108°F

Coefficient of Thermal Expansion (CTE)

ASTM E 831-93 30-50°C70-140°C

95180

53100

Water Absorption ASTM D 570-98 0.38% 0.38%

Glass Transition (Tg) DMA, E” 52°C 126°F

Shore D 78-80 78-80

Liquid Material

Viscosity @ 30 °C (86 °F) 650-750 cps

Penetration Depth (Dp) 4.6 mils

Critical Exposure (Ec) 8.3 mJ/cm2

Color White

Solid Density @ 25 °C (77 °F) 1.18 g/cm3

Liquid Density @ 25 °C (77 °F) 1.12 g/cm3

Measurement Condition Value

3D Systems Corporation333 Three D Systems CircleRock Hill, SC 29730 U.S.A.

Features

Toll-free: 800.889.2964Tel: +1 803.326.4080moreinfo@3dsystems.com

www.3dsystems.com

Warranty/DisclaimerThe performance characteristics of these products may vary according to product application, operating conditions, or with end use. 3D Systems makes no warranties of any type, express or implied, including, but not limited to, the warranties of merchantability or fitness for a particular use. © 2013 by 3D Systems, Inc. All rights reserved. Specifications subject to change without notice. Xtreme is a trademark, the 3D logo, Accura and SLA are registered trademarks of 3D Systems, Inc.

Measurement Condition Metric U.S.

PN 70740 Issue Date - March 2013

Tough/DurableC

lass

www.3dsystems.com

VisiJet® M3 Materials for ProJet SD & HD Printers

The VisiJet line of plastic materials offers numerous capabilities to meet a variety of commercial applications. 3D Systems’ ProJet 3500 3D printers use VisiJet M3 materials to build accurate, high-definition models and prototypes for proof of concept, functional testing, master patterns for moldmaking, and direct investment casting. Vertical markets for the ProJet 3500 line include transportation, energy, consumer products, recreation, healthcare and education. Toughness, high temperature resistance, durability, stability, watertightness, biocompatibility and castability are a few of the key attributes you will find within the VisiJet M3 materials line. Parts can be drilled, glued, painted, plated, etc. Support material offers easy, non-hazardous post-processing and preserves delicate features.

DISCLAIMER: It is the responsibility of each customer to determine that its use of any VisiJet® material is safe, lawful and technically suitable to the customer’s intended applications. The values presented here are for reference only and may vary. Customers should conduct their own testing to ensure suitability for their intended application.

Properties Condition VisiJet M3-X

VisiJet M3 Black

VisiJet M3 Crystal

VisiJet M3 Proplast

VisiJet M3 Navy

VisiJet M3 Techplast

VisiJet M3 Procast

VisiJet® S300

Composition -------------------------------------------- UV Curable Plastic -------------------------------------------- Wax Support Material

Color White Black Natural Natural Blue Gray Dark Blue White

Bottle Quantity 2 kg 2 kg 2 kg 2 kg 2 kg 2 kg 2 kg 2 kg

Density @ 80 °C (liquid) ASTM D4164 1.04 g/cm3 1.02 g/cm3 1.02 g/cm3 1.02 g/cm3 1.02 g/cm3 1.02 g/cm3 1.02 g/cm3 N/A

Tensile Strength ASTM D638 49 MPa 35.2 MPa 42.4 MPa 26.2 MPa 20.5 MPa 22.1 MPa 32 MPa N/A

Tensile Modulus ASTM D638 2168 MPa 1594 MPa 1463 MPa 1108 MPa 735 MPa 866 MPa 1724 MPa N/A

Elongation at Break ASTM D638 8.3 % 19.7 % 6.83 % 8.97 % 8 % 6.1 % 12.3 % N/A

Flexural Strength ASTM D790 65 MPa 44.5 MPa 49 MPa 26.6 MPa 28.1 MPa 28.1 MPa 45 MPa N/A

Heat Distortion Temperature @ 0.45MPa ASTM D648 88 °C 57 °C 56 °C 46 °C 46 °C 46 °C N/A N/A

Ash Content N/A N/A N/A 0.01 % 0.01 % 0.01 % 0.01 % N/A

Melting Point N/A N/A N/A N/A N/A N/A N/A 60 °C

Softening Point N/A N/A N/A N/A N/A N/A N/A 40 °C

USP Class VI Certified* No No Yes No No No No N/A

ProJet Compatibility SD, HD SD, HD SD, HD SD, HD SD, HD SD, HD HD SD, HD

Description ABS-like Plastic

High strength & flexibility

plastic

Tough Plastic,

Translucent

Plastic, Natural

Plastic, Blue

Plastic, Gray

Castable Plastic

Non-toxic wax ma-terial for hands-free melt-away supports

VisiJet M3 Navy VisiJet M3 Techplast VisiJet M3 Procast

VisiJet M3-X VisiJet M3 Crystal VisiJet M3 Proplast VisiJet M3 Black