Embed Size (px)
Citation preview
Combinable systemfor the assembly of power switchgear and controlgear assemblies (PSC) up to 630 A
Safe, Even in Extreme Environments!Mi Power Distribution Boards up to 630 A
�� Safe even in extreme environments such as dust, dirt, humidity and in harsh industrial environments.
Configurator supports design and project engineering of Mi distribution boards
Elektro MustermannFirma:
Kunde: Projekt:
Stückliste
Projektierer: MustermannStraße Nr.: Musterstraße 1PLZ/Ort: 0815 MusterstadtTel.: +49 (0)Fax:E-Mail: [email protected]
Nr.: 1111Firma: Elektro MüllerName: HV MüllerAnsprechpartner: Herr. M. MeierAnschrift:Straße Nr.: Mustergasse 47PLZ/Ort:PLZ/Ort: 47474 Musterstetten
Tel.:Fax:
Druckdatum 16.07.2013
Ausgewählte Positionen/Verteilungen: Position1/Verteilung1
Montagezeitin min
Gewichtin kg
BezeichnungMenge inStück
TypGehäuse-nummer
Nr.
1 1,00 Mi 6427 1 13,74 0,00NH-Sicherungslasttrennschaltergehäuse mitSicherungslasttrennschaltern nach IEC 60947-3, Größe NH 00, 3-polig Anzahl-Sicherungen 2 , Bemessungsstrom: 125 Amax. Bemessungsstrom Sicherungseinsatz,Poligkeit 3-polig, Sammelschienen-Bemessungsstrom 400 A , SicherungsgrößeNH 00
2 1,01 Mi WD 2 2 0,04 0,00Wanddichtung für den Zusammenbau von Mi-Gehäusen
3 2,00 Mi 7455 1 6,77 0,00Lasttrennschaltergehäuse mit eingebautenLasttrennschaltern nach IEC 60 947-3Bemessungsbetriebsstrom 250 A In=,Poligkeit 3-polig
4 2,01 Mi WD 2 2 0,04 0,00Wanddichtung für den Zusammenbau von Mi-Gehäusen
5 2,02 Mi FP 72 1 0,27 0,00Kabeleinführungsflansch mitBefestigungskeilen und Dichtung Dichtbereich30-72 mm 2 x je Ø, Gehäusewand 300 mm
6 3,00 Mi 1224 1 2,72 0,00Automatengehäuse zum Einbau vonReiheneinbaugeräten nach DIN 43 880Teilungseinheiten: 24 , Tragschienen 2-reihig
7 3,01 Mi WD 2 1 0,04 0,00Wanddichtung für den Zusammenbau von Mi-Gehäusen
8 4,00 Mi 0200 1 1,92 0,00Leergehäuse mit transparentem DeckelEinbaubreite 275 mm , Einbauhöhe 275 mm
9 4,01 Mi TS 30 1 0,20 0,00Tragschiene für Mi-Leergehäuse Größen 1 bis8 Höhe: 35 mm Hutprofil, Länge 284 mm
Seite 1 von2
Zwischensumme: 0,0025,84
�� Comfortable project engineering with the configurator in 3D.
Suitable for indoor installation and outdoor installation, protected against weather influences Pre-assembled enclosures with standardised kits up to 630 A Proven in commercial buildings in rough industrial atmospheres and difficult environments.
According to IEC 61 439-2 Power distribution board up to 630 A as power switchgear and controlgear assembly (PSC)
Degree of protection IP 65
Protection class II,
EMC compliant busbar system
Certified by ASTA
The intuitively usable 3D planning tool supports electricians, electrical engineers and wholesalers during design, project engineering and ordering of Mi distribution boards.
Online via the Internet at www.enyguide.eu or offline on CD-ROM.
�� Generation of the layout for electricians.
�� Automatic creation of the parts and order list.
�� For protected installation outdoors, here e.g., with canopy
PASSION FOR POWER.
98 17 0851 10.13/3/11
�� Data export of the installation layout in a dxf-format, the parts list in either a ASCII or Excel format.�� Testing of the mechanical assembly incl. automatically necessary supplements, e.g., box walls,
busbar connectors etc.�� Different layers with the projection of assemblies, covers and doors, e.g., behind protection covers
www.hensel-electric.de
Representations abroad
AfricaAngola
Egypt Mozambique South Africa
AmericaArgentinaUSA
AsiaBangladeshBhutan CambodiaGeorgiaIndiaIndonesiaKazakhstanMalaysiaMaldivesMyanmarPakistanPeople’s Republic of ChinaPhilippines SingaporeSouth KoreaSri LankaTaiwan Thailand
EuropeAustriaBelgiumBulgariaCroatiaCzech Republic DenmarkEstonia
FinlandFranceGreat BritainGreeceHungaryIcelandIrelandIsraelItalyLatviaLithuaniaLuxembourgMontenegroNetherlands NorwayPolandPortugalRomaniaRussiaSerbia andSlovakiaSpainSwedenSwitzerlandTurkeyUkraine
Middle EastUnited Arab Emirates BahrainIranKuwaitOmanQatarSaudi Arabia
OceaniaAustraliaNew Zealand
Gustav Hensel GmbH & Co. KGIndustrial Electrical Power Distribution Systems
AltenhundemGustav-Hensel-Str. 6D-57368 LennestadtGermanyP.O. Box 1461D-57344 Lennestadt, Germany
Phone: +49 (0)2723/609-0Fax: +49 (0)2723/60052Email: [email protected]
PASSION FOR POWER.
High quality materialfor demanding applications
�� Five box sizes can be combined in all directions and can also be used as an individual box.
�� The combinable system is ideally for the fast and simple assembly up to 630 A
Combinable in all directions
�� Removable box fin to insert cables via two boxes or a simpler wiring
�� External brackets or mounting profiles for wall fastening
Easy and flexibleduring assembly, connection and installation
�� The cable insert allows inserting cables from the front.
�� Depending on the electrical function operate the cover manually (for unskilled persons) or with tools (for skilled persons)
�� Lid lock prevents unauthorised opening of cover
Connection-ready solutionsfor special applications
�� Changeover switch boxes (I-0-II) reliably switch to backup power sources
�� Inverter collector�� Connection of generation facilities
�� Individual box with electrical functions ... �� ... can be built individually by the electrician for a distribution board.
Combinable solutionsfor the self-assembly of distribution boards up to 630 A
�� Main line distribution boards
Always the suitable locking systemfor access and operation areas
Modular enclosure systemto built up power switchgear and controlgear assemblies (PSC) up to 630 A according to IEC 61439-2
�� A hinged lid for simple operation of equipment.
�� Ventilation facilities to reduce the formation of condensation
�� Robust and resistant: Mi distribution boards are resistant to dust and water and withstand the harshest conditions
�� Flame-retardant, self-extinguishing burning behaviour: Glow wire test 960° C according to IEC 60 695-2-11
�� UV resistant
�� Protection covers for operating devices and bus-mounted devices for protection against contact
�� Cover strips cover the equipment openings from accidental contact.
Safety for personsby total insulation
�� Protection class II, (Total insulation)
�� Appropriate accessories and enclosures with removable DIN rail rack and earth connection allow to build up distribution boards in protection class I (earthed).
�� Safe even in the most extreme weather conditions outdoors, e.g., with a canopy.
size 1
size 2
size 3
size 4
size 8
