Accessory Assembly Full

7/27/2019 Accessory Assembly Full

1/10

PAPER CRAFT

Assembly instructions: Ten A4-sized sheets.

Paper craft: Twelve A4-sized sheets with 136 parts in all

Thank you for downloading the YZF-R1 realistic paper craft Accessory

Kit. To complete assembly of the kit, refer to this manual and the assem-bly symbols indicated on the pattern sheets.

Assembly Instructions

* The patterns for the miniature realistic paper craft, YZF-R1 are not included in

this file. They can be downloaded separately from the corresponding links.

These instructions apply only to the "Accessory Kit".

These Paper Craft parts are easier to work with when printed out on strong,

thick paper (like postcard stock).

*In creating these Paper Craft models we use 135kg Kent paper stock (0.18mm).


2/10

- 2 -

Note

Items of Caution

*Take care when using sharp or pointed objects or when

using bladed cutting tools. Place a heavy sheet of paper

under the paper you want to cut.

*Use glue and other adhesives only in well-ventilated

areas.*When printing, use a slightly reduced font size. There

may be differences in dimensions, depending on the type

of printer used.

Tools and materials needed

-Ruler -scissors - blade cutter or "Exacto-knife" - awl or

other pointed tool (for making a folding crease) - felt pen

- pin set - glue - hand towel ( for cleaning your fingers) -

dictionary or other heavy book ( to press the papers flat).

*Cut carefully with cutting blade, Exacto-knife or

scissors.

*For folding parts, first use an awl or other pointed

tool to make a light crease along the dotted or solid

line. This will make the folds straight. Avoid making

strong creases, as this will cause the paper to tear.

*As an adhesive, white wood glue is recommended.

Avoid over application as this will cause the paper

to wrinkle.

*Before beginning assembly, test adhesive amounts

on extra paper.

*Occasionally, white spots will be apparent on folds

and cuts. Use a marker or pencil to fill in these spots.

It is recommended that this be done after each stage

of assembly because coloring becomes more diffi-

cult once parts are assembled.

TO BEGIN

HOW TO ASSEMBLE

One - point Advice

*Follow the working method and markings carefully.

*Cut carefully along the outter line with cutting blade,

Exacto-knife or scissors.

Fold along these lines. The printed

surface should be on the outside of

the folded shape.

Solid lines

Dotted line

Fold along these lines. The printed

surface should be on the inside of

the folded shape.

Broken lines

Cut out parts marked with an as-

terisk(*).

Cut along these lines.

Do not fold or cut the parts

marked .

Basic working method and markings

Red dots are the reference positions

for gluing surfaces.


3/10

- 3 -

A-42~47

Tool-a

A-99i101j

1 Assembling the Tool BoxFirst, assemble each component by following theworking method and markings. Then, refer to the il-lustration and photos below to glue the parts together.

Indication ofWorking Methods Fold or Curve Adhere

ToolsSheet A-8, 60 parts in total

Fold each relevant part according to the assembly symbols.

* Freely display the tools in the functional drawers of the tool box.

Fold only the edges. Fold only the edges.

Make six replicas of the part invarious sizes.

Make nine replicas of the part invarious sizes.

A-48~56

Tool-b Tool-c

A-94 (96)A-95 (97)

Make two different-sized repli-cas of each part.

Tool-dA-86 (87) (91) (92) (93)

A-84 (85) (88) (89) (90)

Make five different-sized replicas ofeach part.

Tool-e

A-57 (58) (59)

Make three replicas of the part.

Make sixteen replicas of the partin various sizes.

A-68~83Tool-i

Tool-f

A-60 (61)

Make two replicas of the part.

Tool-g

A-66 (67)


Tool-h

A-64 (65)


Tool-i

A-62 (63)

Make two replicas of the part.Make two replicas of the part invarious sizes.

Tool-k A-98 (100)

Insert and gluepart A-99 aftermaking a slit inpart A-98.


4/10

- 4 -



DrawersSheet A-5.6.7, 23 parts in total


Drawer- a. b Make two replicas of each part.

A-36 (37)

A-40 (41)

Drawer- c

A-38

A-39

Drawer- d. e. f A-29 (30)(31)

Make three replicasof each part.

A-24 (25)(26)

Drawer- g(dummy)

A-21

A-22

A-23 A-28

Drawer- h(dummy)

A-19 A-20 A-27

Drawer- i A-33

A-32

Drawer-j

A-34

A-35


5/10

- 5 -

Lid

Tuck the part incompletely andglue it.

A-7 (8)

A-3Tuck the part incompletely andglue it.

Inner walls- top board and bottom board

A-7 is to be the top boardand A-8 the bottom board.

Inner walls-central part- vertical

A-5

Inner walls-central part- horizontal

A-6 A-9 (10)

Inner walls- left and right

A-15 (16) (17) (18)

Wheels

A-11 (12) (13) (14)

Make four identical wheels.



Body of Tool BoxSheet A-2.3.4.5, 15 parts in total


Looking at the diagram, A-9should be on the left and A-10

on the right.


6/10

Glue folded A-1 to .

- 6 -

A-2

A-1

A-4

Assemble according to steps through .

Lid

Glue six previously assembled boards of the inner walls.


Glue the inner walls to A-2.

Insert and glue the previously assembled drawers in place.

Note: Freely place tools in the functional drawers.

Carefully keep the lid open when gluing it to A-2. Also glue

A-4 between the lid and A-1.

Glue each wheel to the bottom board.

Reference photo

Inner walls- bottom board

Inner walls- top board

Inner walls-central part- vertical

Inner walls-central part- horizontal

Inner walls- left

Inner walls- right

Drawer- a

Drawer- b

Drawer- c

Drawer- dDrawer- e

Drawer- f

Drawer- hDrawer- g

Drawer- iDrawer- j

Wheels



FinishFold each relevant part according to the assembly symbols.

Please use the dots on each component as reference when gluing surfaces.


7/10

- 7 -

B-1

B-2

B-3

B-4

B-5

B-6

B-7

Assembling the Engine OilFirst, assemble each component by following theworking method and markings. Then, refer to the il-lustration and photos below to glue the parts together.


Engine OilSheet B, 7 parts in total



Engine Oil / Large Engine Oil / Small

Glue B-3 according tothe dotted line on B-2.

Reference photo

2


8/10

- 8 -

C-1

C-2

C-3

C-4

C-8

C-7

C-6

C-5

Assembling the Maintenance ChemicalsFirst, assemble each component by following theworking method and markings. Then, refer to the il-lustration and photos below to glue the parts together.


Maintenance ChemicalsSheet C, 8 parts in total



3

Long Life Coolant

Glue C-3 according tothe dotted line on C-2.

Grease Spray Filter Oil / Small

Filter Oil / Large

Reference photo


9/10

- 9 -

Assemble and glue in place D-2, D-3, D-4, D-5, D-10, D-11, D-13, and D-14.

Glue , , D-8, and D-9 according to the diagram.

Glue to D-12.

Glue D-1 to according to the diagram.

Assemble the wheel parts, D-6 and D-7.

D-1

D-2D-3 D-4D-5

D-8

D-9

D-6D-7

D-10D-11

D-13

D-14

D-12

Assembling the StandFirst, assemble each component by following theworking method and markings. Then, refer to the il-lustration and photos below to glue the parts together.


StandSheet D, 14 parts in total



4


Reference photo


10/10

- 10 -

E-1

E-2

E-3

E-4

E-5

E-6

Assembling the Rear TireFirst, assemble each component by following theworking method and markings. Then, refer to the il-lustration and photos below to glue the parts together.


Sheet E, 6 parts in total



5

REAR TIRE

Gluing area

Reference photo

Documents

Accessory Assembly Full