accessories RANGE ROVER - LanDrive - RRcla_10th_access_lo.pdf · Range Rover P38 95~98 Range Rover L322 99~100 4x4 Essentials Wheels, Covers & Tyres 102~103 Winches & Winching Equipment

accessories

Certificate No. RS20282

RANGE ROVER L A N D R O V E RThis section includes our range of

Accessories suitable for the Land RoverRange Rover. We also include accessorieswhich suit popular modifications to Range

Rover vehicles - so don’t think it’s amistake if you see something that doesn’tusually fit original vehicles, because you

can bet that someone has a modifiedvehicle it will fit.

You’ll also see some items arephotographed on other Land Rover vehicles

– this is simply because we didn't have aRange Rover to hand when the

photographer called in – so just make sureyou use the right reference number whenordering or check with one of our expert

staff who will be able to advise on correctfitment.

PARTS: Bearmach produces vehicle-specific catalogues listing our vast range

of parts suitable for all Land Rovervehicles – make sure you get the latest

edition for your particular vehicle.

NOTE: Manufacturers parts numbers areused for reference purposes only.

After the success of the original Land Rover in the early 1950s there was always pressure toproduce a more stylish comfortable vehicle to appeal to a more upmarket clientele. There

were a number of development projects in the 1950s, but due to limited funds nothing made itto production. The mid 1960s saw more favourable conditions for the development of a luxury4x4 and so with the acquisition of the V8 3.5 engine from America and a revolutionary designconcept by Spen King the Range Rover was launched in 1970.

The 100in chassis used provided tremendous wheel travel and a new gearbox wasdeveloped to cope with the V8’s power. Coil sprung suspension was used and a locking diffadded to its off-road abilities. A 5 door special edition model was created with the fashionmagazine Vogue - this was so popular that the Vogue badged Range Rover became the standard5 door model after the demise of the 3 door version in 1972.

The next two decades saw continual refinements added – such as a viscous locking diffand the world’s first off-road ABS system. Another first was electronically controlled air-adjustable suspension - just when the competition was catching up to adopt coil springs.

The “Classic” continued in production until 1996, slightly overlapping the introductionof the P38 in 1994. As the “Classic” developed, its market position had moved graduallyupward, hence the New Range Rover needed to compete in the luxury car market withoutcompromising its best-in-class off-road capabilities.

The P38’s 108" box section chassis was strengthened, the V8 engine was improved and4-coil distributorless ignition was added to givea smoother engine with more power and torque.A 4.6 engine was added to the range in theHSE model. The range of the air-suspensionwas improved to give 5" variation in ride heightand the beam axle arrangement wasstrengthened. The total package made the P38the most capable off-roader in any class ofvehicle let alone the luxury market.

A significant leap was therefore neededto build a vehicle for the 21st century and theBMW developed Range Rover L322 waslaunched in 2002. Only the 3rd Range Rovermodel in 32 years and the first with amonocoque bodyshell. Almost every componentwas new yet it still keeps the essence of the

original Land Rovers – and so thestory continues…

CONTENTS PAGEFront End Protection 80Lamp Guards 80Side Steps 81Exterior Styling 82~83Off-Road Protection 84Roof Racks 85Towing & Winching 85Performance EquipmentHeavy Duty Suspension 86~89Engine 89~90Axle & Steering 91~92Brakes 92Electrical 93Interior AccessoriesDog Guards 93Mats, Gear Knobs & Steering Wheels 94Range Rover P38 95~98Range Rover L322 99~1004x4 EssentialsWheels, Covers & Tyres 102~103Winches & Winching Equipment 106~109Driving Lights & Torches 114~115Coolers 117Toys & Gifts 118~120Books 122Price List 123~129

Range_10th_access_06 15/11/05 5:21 PM Page 79

CLASSIC

www.bearmach.com to order – contact official stockists

acce

ssor

ies

80

nudg

e bar

sRANGE ROVER

L A N D R O V E R Parts and Accessor ies su i tab le for Al l Land Rovers f rom BEARMACH Plc

REAR NUDGE BAR andLOAD CARRIER

Hinges to allow carrying of up to100kgs. Locks into position with pinand “R” clip. Manufactured in Flat steel 14 gauge with 2 x 90° bends eachside. 11/2" (37mm) diameter tube. Finished in Black nylon. Weight: – 18kgs.

BA 004 – Rear Nudge Bar and Load Carrier

BA 004

STEELWRAPAROUNDNUDGE BAR… with RemovableLamp Guards

Manufactured as BA 095described above but withremovable fitted LampGuards to ensure lampscan be cleaned easily.

BA 096 – Steel Wraparound Nudge Bar with Lamp Guards

For fitment to Airbag models please consult your Land Rover dealer.

REAR HINGED LAMPGUARDS SETSlatted aluminium lamp guards.Black nylon coated finish. Sold aspairs and match Lamp Guardssupplied on BA 003A2 Nudge Bar Allfixings are Stainless Steel

BA 011RH – Pair of rear hinged lampguards

HINGED LAMP GUARDS SETSlatted aluminium lamp guards. Blacknylon coated finish. Brackets pick up onexisting light mounting holes a simplefitting procedure. All fixings arestainless steel.

BA 011/4 – Set of four hinged lampguards

BA 011FH – Pair of front hinged lampguards

BA 011/4

BA 011RH

LAMP GUARDSLamp Guards are more than just a cosmeticaddition to your vehicle. They help protect yourvaluable lights from debris thrown up by traffic infront of you, those inevitable knocks when off-roading or even in the supermarket car park.

FRONT END PROTECTIONAll of our black, nylon coated steel Nudge Bars, Bull

Bars and ‘A’ frames give an aggressive andpurposeful look and offer improvedfront end protection due to theirstrength. Spot light mounting points

are also included on most. The units boltto the existing holes on thechassis/bumper although some cuttingof the front spoiler may be required.

Most of the front protection bars arealso available in high grade, polished

stainless steel.Note: For vehicles fitted with side lift jacks use

extension BA 2140 (Optional).

BA 096BA 095

STEEL WRAPAROUND NUDGE BARWraparound nudge bar with flame cut profile up-rights.Features top rail and centre plate with provision to mount spotlights.Rubber mounting over-riders for uprights available as an option.Minimum cutting of spoiler is required to fit, with easy fix special mountingsto ensure a simple fit.

BA 095 – Steel Wraparound Nudge Bar

NOTE: – Not designed for use with BA O11 Lamp Guards or BA 2029 Winch Plate.

For fitment to Airbag models please consult your Land Rover dealer.


CLASSIC

find your local stockists on back page www.bearmach.com

acce

ssor

ies

81

RANGE ROVERL A N D R O V E RParts and Accessor ies su i tab le for Al l Land Rovers f rom BEARMACH Plc

STAINLESSSTEEL SIDE STEP

Suitable for Range Rover Classic. Madefrom mirror polished stainless tube and tread

plate with a raised anti-slip surface. Two holes tobe drilled through outrigger.

BA 100S – Side Step in Stainless Steel (RR Classic)

SIDE STEP WITHRUBBER TREAD

Galvanised steel frame construction witha dimpled, moulded rubber tread inset. Alsohas a rubber edge moulding.Easy to install as it picks up on body mounting bolts inthe chassis, and two holes drilled through the outrigger.(NOT LSE Range Rover)

BA 100 – Side Step with Rubber Tread

BA 100

BA 100S

SIDESTEP WITHALUMINIUMTREADSteel frame constructiongalvanised coating withaluminium tread plate and rubberedge moulding.Easy to install as it picks up on bodymounting bolts in the chassis, and it is onlynecessary to drill two further holes on each sideto ensure you have a very solid chassis mountedside step. (Not LSE Range Rover)

BA 092 – Side Step with aluminium tread

SIDE STEPS

All Bearmach side steps aredesigned not only to ease enteringand exiting the vehicle, but alsohelp to protect the vehicle fromscuffs, dings and other annoyingmarks picked up through everydayuse. Easily fitted to the chassis ofthe vehicle, with minimalmodification (underneath vehicle),the sturdy steps also contribute tothe vehicle’s appearance.

REAR STEPMade from heavy gauge steel and bar,zinc plated and yellowed to give an extradurable finish. No drilling required, bolts directlyonto crossmember and can be used on most vehicles withtow bars fitted. A very functional accessory.

BA 172 – Rear Step

BA 172

BA 092

lamp

guar

ds


CLASSIC


acce

ssor

ies

82

RANGE ROVER L A N D R O V E R Parts and Accessor ies su i tab le for Al l Land Rovers f rom BEARMACH Plc

GENUINE FRONT SPOILER

Original spoiler, exactly as O.E. (MXC 6828). Lights available as an optionat extra cost.BA 078G – Genuine Front Spoiler [RR]

DEEP FRONT SPOILER(Not illustrated) Plastic spoiler, black finish. Easily fitted, although if used inconjunction with Nudge Bars, a slot must first be cut for the profiles of thebar.Lights available as an option at extra cost.

BA 078A – Deep Front Spoiler [RR]

BUMPEROVERIDER SET

Plastic overider set offour pieces to update yourvehicle.

BA 079 – Bumper Overider Set [RR]

BA 079

BA 078G

EXTERIOR STYLINGA range of accessories to improve theappearance of your Range Rover while offeringpractical protection and improvements.

SIDE MOULDINGSAvailable in black with chrome strip.Supplied in sets or individual pieces. These attractive mouldings not onlyenhance the appearance of the car but also provide protection for yourvehicle. No drilling required – easy to fit.

BA 167 2 door side mouldingBA 168 4 door side mouldingBA 168A 4 door side moulding (’91 onwards)

BA 167

PERSPEXWEATHER-SHIELDSMade from perspex,easily fits topassenger anddriver’s doors to stoprain penetrationwhen on the move.Reduces draughts yetstill allows goodventilation.

BA 055 Range Rover up to 86, right hand, with ventBA 055A Range Rover up to 86, left hand, with ventBA 056 Range Rover 86 on, 4 door (pair)BA 165 Range Rover, 2 door right handBA 166 Range Rover, 2 door left handNOTE: The photograph shows a similar product fitted to a Freelander

BA 178 Range Rover Sunroof Deflector (not illustrated)

CENTRE GRILLE CONVERSIONRange Rover Centre Grille Spotlight conversion (For post 1986 models)Spotlight conversion grille supplied with Halogen driving lights, relays andwiring. Will fit all air-conditioned and automatic vehicles. (Classic RangeRovers). Replaces the original full width grille and and is supplied ready for installation.

BA 013C – Centre Grille Conversion

PLASTIC FRONT WINGS

MXC1408R – To suit Classic Range Rover From Vin FA. 4 doorMXC1409R – To suit Classic Range Rover From Vin FA 4 doorBR 1140R – To suit Classic Range RoverBR 1144R – To suit Classic Range Rover

BA 013C

Also see DrivingLights we haveavailable in the4x4 ESSENTIALSsection

side s

teps


CLASSIC


acce

ssor

ies

83


WHEEL ARCH EXTENSIONSThese fibreglass extensions give your vehicle the flared-arch look they fit thestandard vehicle with no further cutting of bodywork. Supplied in black, butcan easily be sprayed to match vehicle colour.BA 169 Wheel Arch Extensions to fit 2 door modelBA 170 Wheel Arch Extensions to fit 4 door model

BA 170

EXTRA WIDE WHEELARCH EXTENSIONSFibreglass Wheel ArchExtensions to allow largerwheel and tyre fitments formore effective off-road use.Available in standardand XL sizes. Somecutting of archesand bodywork maybe required. RANGE ROVER CLASSIC

SNORKEL

A stylish and effective Snorkel tosuit Range Rover Classic.Manufactured in Fibreglass.Pipework from the air filter to thesnorkel is not included.

BA 3710 Fibreglass Snorkel forRange Rover Classic

BA 3710

Raised AirIntakesFitting a raised airintake and wading kitto your vehicle meanscleaner air in dustyconditions andimproved wadingability in wet orflooded conditions.

NOTE: Photographshows a similarproduct fitted to aDiscovery

BA 2127 – MantecMetal Raised AirIntake to suit V8/TDIRR

BA 2127

SPARE WHEEL CARRIER Conveniently allows the mounting ofthe spare wheel to the back of aRange Rover Classic. Mounts ontochassis at the bottom and a springloaded lever locks the wheelsecurelyinto a central position. Hingesoutwards to allow easy access to theloadspace.

BA 132A – Spare Wheel Carrier for use on Range Rover Classic models

MUD FLAPSMUD FLAP KITS FOR RANGE ROVERBA 201 Front Mudflap kit*BA 201/A Rear Mudflap kit*BR 3092 Mudflap only (each)

* Kits consist of a pair of Mudflaps plus all brackets and fittings.Note BR 3092 and BR 3248 do not include fittings

BA 3700 Std Wheel Arch Extension 2 Door RR ClassicBA 3701 XL Wheel Arch Extension 2 Door RR ClassicBA 3702 Std Wheel Arch Extension 4 Door RR ClassicBA 3703 XL Wheel Arch Extension 4 Door RR Classic

exter

ior st

yling


CLASSIC


acce

ssor

ies

84


DIFF GUARDA new style Diff Guardthat offers improvedprotection. Easy to fitand Zinc plated to resistcorrosion.

BA 125 – Wrap aroundDiff Guard for RangeRover Classic. Front andRear (Not LHD)

DIFF GUARDOur diff guards are easilyfitted to a Range Roverand provide a simplesolution to protect thoseall important differentials.Available in a zinc coatingfinish or stainless steelthey are fitted without anymodification to thevehicle.Easy to fit, applicable toall models with standardaxles, Zinc plated for corrosion resistance.NO DRILLING required.

BA 121 – Diff GuardBA 121S – Diff Guard in Stainless Steel.

SUMP GUARDSMade from Heavy Duty 7 mm Aluminum plate and with 6mm fixing bracketswhich are zinc coated for extra corrosion resistanceThe Aluminum plate has 9 vent holes (38mm dia) to allow for ventilation,and to allow excess water to drain.

BA 083A Fits RR classicBA 083B Fits RR classic with nudge bar fitted

NOTE: BA 083B Fits with our own range of nudge bars and A frames only.

NOTE: Photographs shows similar product fitted to other Land Rovers

BA 083B

BA 083

BA 121

OFF ROAD PROTECTIONIf you intend to take your Range Rover off-roadyou ought to consider the vulnerable areasunderneath the vehicle as well as the bodywork.Bearmach make a variety of items allmanufactured to the highest standards andtested to destruction to give you peace of mindwhen tackling the roughest terrain.

ROCK GUARDSMade from galvanised box section specifically for the off road enthusiast.They replace the plastic sills and fix to the chassis to ensure that minimumstress is put onto the body work. They also help to protect the body work anddoor bottoms from damage. Whether you decide on the galvanised look, paintto match the colour of your vehicle or go for the black nylon coated option,our rock guards are functional and attractive on any vehicle and are a mustfor the off road enthusiast. Range Rover Classic only.

BA 2091 Black Nylon Coated.BA 2091G Galvanised finish which can be painted to suit body colour.

BA 2091G

BA 125

NOW AVAILABLEINSTAINLESSSTEEL

DIFF GUARD andSliderThis easy to fit product willnot interfere with groundclearance of vehicle. It isnearly impossible to lose theguard due to its mountingmethod and one Diff Guardfits front or rear diffhousing. All bolts, nuts,washers and instructionsare supplied making it easy for the DIY fitter.

BA 3662 – Diff Guard and Slider

BA 3662

off-r

oad

prot

ectio

n


CLASSIC


acce

ssor

ies

85


ROOF RACKSFamily holiday, major expedition or just toomuch to put inside the vehicle – See Page 110for our range of Roof Rack Accessories suitablefor ALL Land Rovers

PARCEL TRAY / LUGGAGE BASKETThis Parcel Tray features a quick release design. The end tubes can bepositioned to create either flat bed or basket, the platform can be positionedon a wide variety of roof lines. Manufactured from aluminium, light weight,aerodynamic and totally rust free.

BA 3098 (RTC 9476) – Luggage Carrier suitable for Range Rover

BA 3098

WINCH PLATEChassis mounted winch plate to suit Range Rover Classic, will take 6,000 or8,000lb Warn winches. Fits discreetly and with only minimum cutting ofspoiler required. (not compatible with Come-Up brand)

BA 2029 – Range Rover Classic chassis mounted winch plate

WINCHING EQUIPMENTFor the serious off-roader a winch can be an essentialpart of the kit. Bearmach stocks a wide range ofwinching accessories with winch plates to suit allmodels and fitments.See our range of Winches and Accessoriesin the 4x4 ESSENTIALS section

TOW HITCH

Sturdily constructed adjustable towhitch. Can be adjusted to five differentheights. Finished in black (tow ball notincluded).Photograph shows similar productfitted to a Defender.

BA 186 Range Rover Classic TowHitch (Adjustable)

BA 194 Range Rover Classic TowHitch (Fixed)

BA 0204 Range Rover Tow Hitch95 on (Fixed)BA 186

TOWING EQUIPMENTTowing is a vital function of a 4x4 vehicle yet canpresent unique problems because of the higher groundclearance. Bearmach offer a comprehensive range ofequipment specifically for Range Rovers …for Towballsand other Towing Accessories please see page 111

WINCH BUMPERFabricated from 5mm thick mild steel and finished in black powder coating.Uses the existing bumper mounting holes on the chassis.

BA 3127 – RR Classic Winch Bumper

BA 3127

ROOF BARS

Supplied in pairs, theseracks are suitable forcarrying unwieldy items,such as ladders, and candouble up as ski or bikeracks with a simpleattachment - see below.

BA 043A – Heavy DutyRoof Bars (Non-lockable)

BA 3099 – Lockable RoofBars

BA 3099BA 043A

roof

rack

s & to

wing


CLASSIC


acce

ssor

ies

86


SHOCK ABSORBERSWe always stock a wide range of famous names Shock Absorbers suitable forDefender, Discovery and Range Rover to compliment our Anti Roll Bar Kits,Heavy Duty Springs and PolyBush Kits.

PART No. DESCRIPTION VEHICLE

Monroe Shock AbsorbersBR 3108M Gas Magnum Disco /R.R. (Front)BR 3109M Gas Magnum Range Rover (Rear)STC2832M Gas Magnum Range RoverSTC2833M Gas Magnum Range Rover

Old Man Emu Shock AbsorbersBA 2120 Front RR, Disco, DefenderBA 2121 Rear RR, Disco, DefenderBA 2121H Rear Heavy Duty RR, Disco, DefenderBR 2255O Steering Damper RR, Disco, Series

Bilstein Shock AbsorbersBA 2119 Rear RR, Disco, DefenderBA 2122 Front RR, Disco, DefenderBA 2119A Rear RR Classic, Air SprungBA 2122A Front RR Classic, Air SprungBR2255B Steering Damper RR, Disco, SeriesBA 2119B Rear P38, Air SprungBA 2122B Front P38, Air Sprung

Spax Shock Absorbers – CoiloversBA 026 ‘Even Keel’ Rear RR, Disco, DefenderBA 026A ‘Even Keel’ Front RR, Disco, Defender

Pro Comp Shock Absorbers (ES9000)BR 0645P +0" Gas Shock Absorber RR Classic (Front)BR 1077P +0" Gas Shock Absorber RR Classic (Rear)BR 0645L +2" Gas Shock Absorber RR Classic (Front)BR 1077L +2" Gas Shock Absorber RR Classic (Rear)BR 0645XL +4" Gas Shock Absorber RR Classic (Rear)BR 1077XL +4" Gas Shock Absorber RR Classic (Rear)(Must be used with long travel springs)

HEAVY DUTY SUSPENSIONWe always stock a wide range of famous namesShock Absorbers suitable for Defender, Discoveryand Range Rover to compliment our Anti Roll BarKits, Heavy Duty Springs and PolyBush Kits.

KONI SHOCKSThese top quality adjustable shocks provide a good ride on or off road.Simply adjust the damping rate to suit the surface you are driving on.PART No. Vehicle Front/RearBR 0645K RR Classic FrontBR 1077K RR Classic up to 94 RearSTC2850K RR Classic 94 on Rear

susp

ensio

n


CLASSIC


acce

ssor

ies

87


DISLOCATION CONES BA 3650 Front pair of Dislocation ConesBA 3651 Rear pair of Dislocation ConesBA 3652 Front Spring Retainer Plate (Each)NTC 6106 Rear Spring Retainer Plate (Each)

HEAVY DUTY BLUE SPRINGSSold in pairs, these heavy duty springs are the ideal solution for thosecustomers seeking to improve their vehicle’s load carrying capacity.

PART NO POSITION VEHICLE HEIGHT RATE WIRE HEIGHTINCREASE

BA 2102 Rear RR 40mm 295 Lbs I8mm 445mmBA 2103 Rear RR 20mm 240 Lbs 17mm 413mmBA 2104 Front RR 30mm 195 Lbs 16mm 394mmBA 2106 Front RR 30mm 196 Lbs 16mm 368mmBA 2107 Rear RR 30mm 195.5 Lbs 16mm 413mm

+2" SPRINGS for Off-Road Use+2" springs to fit standard vehicle but intended for off-road use only (NOTfor towing or load carrying).BA 2256 Front RR Classic 50mmBA 2257 Rear RR Classic 50mm

AIR ADJUSTABLESUSPENSION AID

Designed to fit inside your coilsprings. Can be inflated to amaximum of 25psi to maintain thevehicle’s carrying capacity withoutspring sag. No need for expensivespring mods. Kit contains PolyAircells, inflation line, and cell seats.Ideal for towing and eliminates bodyroll.

BA 2163 To suit Range Rover

BA 2163A Compressor KitVehicle mounted to enable you toinflate or deflate the air springs.Complete with all pipes, lowpressure switch etc.

BOGE/SACHS OILFILLED SHOCKABSORBERSPART NO POSITION VEHICLE

BR 3108 Front Classic RRBR 3109 Rear Classic RR

AIR SPRING CONVERSION KITSReplaces the air suspension on Classic Range Rovers with the legendaryBearmach Blue Coil Springs.The benefits are:-� Saving in cost� The ability to fine tune your suspension with a large choice of dampers� The ability to increase the Spring rates and/or increase ride height by

specifying different BM Springs.The Kit comprises:-1 x fitting kit 4 x Spring Seats4 x Spring Retainers 1 x Pair Rear Blue BM Springs1 x Pair Front Blue BM Springs

BA 2226 – Classic RR Air Suspension to Coils Conversion Kit

susp

ensio

n


CLASSIC


acce

ssor

ies

88


BA 2157

ANTI ROLL BARSWhy not combine the heavy duty springs with our range of special suspensioncomponents below.

BA 032 Anti Roll Bars, Front, to suit R/RBA O34A Anti Roll Bars, Rear, to suit R/RBA 032D Spare D Bush Front Set 2 piecesBA 034D Spare D Bush Rear Set 2 piecesBA 032L Spare Link Bush Set 8 pieces

These new twin shock absorber brackets will suit all coil sprung models. Thefront unit consists of top bracket, to take the original shock absorber plus anadditional one, and the bottom bracket to support the additional shockabsorber.The rear unit consists of top shock absorber brackets which bolt through thechassis and bottom brackets which weld onto the axle case.

BA 2156 Single front Tubular Galvanised Shock Tower to suit RangeRover Classic

BA 2157 Twin Shock Mount Front Range Rover ClassicBA 2162 Twin Shock Mount Rear Range Rover Classic

When fitting to ABS vehicles a certain amount of modification will berequired to move the ABS pump and pipes.

TWIN SHOCKABSORBERBRACKETS

POLYURETHANE BUSH KITSThe fitment of BearmachPolyurethane Bushes hasbeen developed to givemore positive location atpivot or fulcrum points.These suspensioncomponents areparticularlyrecommended if youregularly tow or carryheavy loads.

Polyurethane Bushes have been taking over the automotive suspensionindustry. The urethane elastomers used have the versatility and elasticity ofrubber yet with the advantages of rigid plastics and metals.

These bushes have a high capacity to bear tension and compression and havebeen tested at temperatures from -100°C to +100°C. They are resistant todeterioration and swelling caused by oil, grease or chemicals.

BA 2070 P-U BUSH KIT Range Rover up to 1986BA 2071 P-U BUSH KIT Range Rover & Disco from 1986 - 1999

BR 0695P P-U BUSH Shock AbsorberBR 1083P P-U BUSH Shock Absorber

BA 2156

ALL BUSHES

AVAILABLE

SEPARATELY

BA 2220

CASTER BUSH KITSCaster bushes allow the axles to remainin their original positions when raisingthe vehicle (i.e. prevents them twisting).They fit into the radius arms tominimise any stress on steeringcomponents. Suitable for Defender, RRClassic and Disco.

BSC 202PC – Caster Bush Kit RRClassic up to 85

BSC 206PC – Caster Bush Kit RRClassic from 85

Rear Anti Roll BarRear Anti-Roll Bar replaces the original and yet is a moreheavy duty construction. Improves the handling of your Range Rover Classic.

BA 2220 – Replacement Rear Anti-Roll Bar (Heavy Duty)

susp

ensio

n


CLASSIC


acce

ssor

ies

89


• High Air Flow with Excellent Filtration • Designed to Increase Horsepower and

Acceleration • Ideal for extended use in dirty and

dusty off-road conditions• 10 Year / Million Mile Limited Warranty • Economical, a K&N Air Filter Will Last the Life of Your Vehicle

SPECIAL PERFORMANCE EQUIPMENTYou’ve got the nudge bars, the wheels and tyres and youthink you’re ready for some serious off-roading… BUThave you got the performance?In this section Bearmach offer products to improve allaspects of your Range Rover from the powerplant to thethe brakes and axle.If you’ve any querieshow you could best setup your vehicle forsome serious off-roading orcompetition – callour experts forsome experiencedadvice.

REPLACEMENTINTERCOOLERSThese replacement intercoolers fit inplace of the existing original units.They allow the air to be cooled by anextra 50% for a denser charge andresult in up to 25% increase inpower. Available for:

BA 2302 – 200TDi CLASSICRANGE ROVER

BA 2305 – 300TDi CLASSICRANGE ROVER

BEARMACH VEHICLE ENGINE

ESR341K RR P38 All } Alternatives - check before orderingESR4238K RR P38 All

RTC4683K RR V8 4.0 90 – 94ESR1445K DIS/RR All Classics 94 onESR1049K DIS/RR 92 – 94 TDi605191K DIS/RR V8 CARB – (Two required per vehicle)NTC1435K RR Classic VM DieselBA 2309 RR 3.5 (Off Road – clamps to carb)*BA 2315 RR 3.5 (Off Road – clamps to carb elbow) Airbox connectionBA 2316 DIS/RR 300TDI. (Off Road induction kit) 57I

BA 2317 RR Cleaning KitBA 2318 RR Cone Filter - Clamps to Maf

SUSPENSION MODSRef No Description VehicleBA 3660 Body Lift Kit +2" Disco/RR Classic

All the hardware required to achieve a true 2" Body Lift.BA 3661 Suspension Lift Kit +2" Disco/RR Classic

Includes spring spacers, brake lines and all necessaryhardware.

BA 3658 Rear Trailing Arm Kicker Def/Disco/RR ClassicEnables a higher lift with standard rear trailing arms.

BA 3655 Cranked Rear Trailing Arm Def/Disco/RR Classic 86 onFor use with suspension lifts. Includes rear polyurethanebushes.

BA 3657 Shock Kicker Brackets Def/Disco/RR ClassicChanges angle of shock absorbers, for use with lift kits andextended travel shocks.

BA 3659 Laminate Chassis Plates Disco/RR ClassicWelded to existing chassis for increased strength aroundspring mounts.

The following Radius Arms are for improved off-road use. Available instandard, 3° or 6° camber correction – for use with 4" lift kits. Bushes notincludedBA 3670 Front Radius Arm Std Wide Def/Disco/RR ClassicBA 3671 Front Radius Arm 3° Wide Def/Disco/RR ClassicBA 3672 Front Radius Arm 6° Wide Def/Disco/RR ClassicBA 3673 Front Radius Arm Std Narrow RR Classic up to 86BA 3674 Front Radius Arm 3° Narrow RR Classic up to 86BA 3675 Front Radius Arm 6° Narrow RR Classic up to 86

BA 3660 BA 3661

BA 3657 BA 3658

BA 3659 BA 3670

BA 3655

perfo

rman

ce


CLASSIC


acce

ssor

ies

90


HEAD GASKETSBR 3178C V8 composite head gasket. To suit 3.5ETC7819C Composite head gasket 1.2mm thick. To suit 3.9 and 4.2

engines.

PERFORMANCE EXHAUST

This stainless steel exhaust will improve overall performance of V8 Range Roverengines and is supplied complete with extractor manifolds. Slightly moreexpensive than a standard exhaust but well worth the initial expense.

The exhaust in the photo is a Range Rover fitment

BA 039 Extractor manifold to suit Range Rover V8 3.5BA 2160 To suit 3.5 Range Rover V8 (complete with extractor manifold)BA 2161 To suit 3.9 Range Rover V8 (complete with extractor manifold)

PERFORMANCE FLY WHEELSPerformance flywheel. These lightweight performance flywheels comebalanced and ready to fit to your tuned V8 engine. Uses 91/2" clutch

BA 2031 – Flywheel to suit V8 engines

CAMSHAFTS

Designed to increase engine powerBA 2186 Camshaft to suit

3.5/3.9 (+18 -22BHP)

BA 2187 Camshaft to suit4.0/4.6

PERFORMANCECRANKSHAFT DRIVETRAIN KITConsists of forged cam gear, crankgear and heavy duty timing chain.BA 2179 – To suit 3.5/3.9 V8

FULL SILICONE andSTAINLESS TURBO HOSE KITIncludes all necessary components to replace all existing hoses. Fits with standard and uprated intercoolers (see opposite).Available for:BA 2311 - 200 TDI ALL MODELSBA 2313 - 300 TDI ALL MODELS

REPLACEMENT SILICONE TURBO HOSES(REPLACES ORIGINAL HOSE ONLY)Fits standard and uprated intercoolers above.Available for:BA 2332 - 200TDi and 300TDi ALL MODELS

Make sure you see our range of PowerEnhancement Accessories for all Land Rover

engines on page 112

perfo

rman

ce


CLASSIC


acce

ssor

ies

91


A.R.B. AIR LOCKER DIFFSA manually lockable differential which is operated at the driver’s discretionby the push of a button. Locking and unlocking of the ‘diff’ is extremely rapidand can be achieved at any vehicle speed.Installation involves bolt inreplacement of the originalequipment differentialcentre, an air compressorand in-vehicle switch.Can be fitted to bothfront and rear axleswithout compromising on-road performance.

BA 205 To suit Rover Differential. 10 spline*BA 205A To suit Rover Differential. 24 spline** Please specify spline type when ordering.

NOTE: All A.R.B. Diff Lockers require compressor which is availableseparately, order ref: – BA 215

CARBURETTOR AND INDUCTION MANIFOLDCONVERSION FOR ROVER 3.5 V8KIT PART NUMBER – BR 2236BR2236R – Needle Valve Conversion Kit - Off Road UseBEARMACH is pleased to announce a new complete carburettor andinduction manifold kit from WEBER. It is suitable for Rover V8 vehiclesequipped with S.U. or Stromberg carburettors from 1970-1987.The kit features a Weber 4 barrel downdraught carburettor and dual planeinduction manifold. The conversion has been developed for improved enginetorque and fuel economy.Although calibrated for Range Rover 3.5 models, it is also suitable for manyother Rover V8 applications, and for those wishing to carry out engine tuningmodifications. For applications other than Range Rover 3.5 models,calibration changes/adjustments may be necessary.This conversion can be carried out by a competent D.l.Y. mechanic (withbasic tool kit), and comes complete with detailed fitting instructions, coveringvarious models.The kit comprises of: Carburettor; Manifold; Air filter; Throttle linkage*;Fuel line connections/Fuel filter; Engine breather/pulse air system; Hoseconnections; All necessary gaskets, seals and fixtures.

*Automatic transmission vehicles will require supplementary kick downlinkage kit - PART NUMBER BR 2236/A

HEAVY DUTYSTEERING PARTS

These Steel Track Rodsare rally proven. Ideal for the off-road enthusiast and come complete withBM greaser ball joints.Features: No steering damper required. The heavy steel takes stress off theball joints. Rods and joints last longer.

BA 220 – To suit Range RoverBA 222 – To suit Range Rover from ‘93

QUICK RATIO STEERING BOXES

29 turns lock to lock. These Steering Boxes offer a quicker and sharperresponse when needing to turn to full lock

BA 225 – RHD (RR Classic) BA 226 – LHD (RR Classic)

BA 225

HEAVY DUTYADJUSTABLE BALLJOINTS

Adjustable rear differentialball joint. Just take up theslack as it wears.Supplied without gaiter.Suitable for Defender,Discovery and Range RoverClassic.

TRE 76RS – Heavy DutyBall Joints (Adjustable)

TRE 76RS

steer

ing


CLASSIC


acce

ssor

ies

92

perfo

rman

ce /

brak

esRANGE ROVER

L A N D R O V E R Parts and Accessor ies su i tab le for Al l Land Rovers f rom BEARMACH Plc

DETROIT DIFF LOCKERThe Detroit Locker is a fullyautomatic locking traction differentialthat is well known for premiumperformance and dependableoperation. Preload devices betweenthe side gears deliver 100% torqueand power to both drive wheels yetunlock automatically to permitnecessary wheel speed differentiation.The Detroit Locker is trouble-free asit does not require service adjustmentsor special lubricants. Easy to install,

no special tools or case modifications required. One year Limited Warranty.

BA 207 To suit Rover Differential. 10 spline, Locker (inc Carrier andcarrier Bearing)*

BA 207A To suit Rover Differential. 24 spline, Locker (inc Carrier andcarrier Bearing)*

* Please specify spline type when ordering.

DETROIT TRUE TRACThis unit features a gear-type limitedslip design (no clutch or friction platesto wear out). Its positive gear actionautomatically splits the torque withnone of the steering problemsassociated with other traction ‘diffs’.Power transfer is so smooth that it isunnoticeable through the steeringwheel when fitted in front drivesteering axles.It performs as astandard differential on normal

highway driving – then automatically engages when needed in wet, muddy oricy conditions. Includes carrier BearingsTruetrac Diff LockerBA 209 to suit Rover Differential (10 spline – Rear)BA 209F to suit Rover Differential (10 spline – Front)BA 209A to suit Rover Differential (24 spline – Rear)BA 209AF to suit Rover Differential (24 spline – Front)

SPECIAL PERFORMANCE EQUIPMENT

– BRAKESKEVLAR / CARBONFIBRE BRAKEPADSBearmach are now able tooffer Kevlar/Carbon fibrecomposite brake pads.These have been tested onour vehicles for a year andwe have noticed:

� NO squealing � LESS Wear on Brake discs� 30% Improvement in braking performanceAll pads are supplied in sets all fitted with anti-squeal pads and sensor wires(which may be removed if not required)

Currently available to fit the following:Part No OE No VehicleBA 2194 STC9190K Range Rover & Disco – FrontBA 2197 STC9189K Range Rover & Disco – RearBA 2198 STC1276K Range Rover & Disco – RearBA 2199 STC2956K Range Rover – Front

SLOTTED and DRILLEDBRAKE DISCS

The ultimate in BrakingPerformanceThese Ultra Heavy Duty Discsoffer additional durability andimproved stopping power.Designed with Police, Ambulanceand Military in mind these BrakeDiscs are directionally slotted andcross drilled (left/right).

� INCREASES Pad Bite � REDUCES Fade �� DELIVERS exceptional braking performance. �

All sold as matching pairs. Currently available to fit the following:Part No OE No VehicleBA 2203 FRC7329S RRBA 2204 FTC902S RRBA 2205 FTC1381S RR

BRAIDED BRAKE HOSE

Braided Stainless Steel BrakeHoses are available to replace thestandard rubber flexible hoses andoffer a more durable alternative.TUV approved.

Part No VehicleHose QtyBA 210* Range Rover Classic (UNF) 5BA 211* Range Rover Classic (Metric) Non ABS 5BA 216* Range Rover 92-94 with ABS 6BA 217* Range Rover 90-92 with ABS 6

Please specify exact model when ordering.*Available from stock 50mm extra length. (Add 'L' to ref. no. when ordering)Others sizes are available at special order.

WHEEL ADAPTER SET

To convert the stud pattern of thewheels fitted to your vehicle to allowfitment of different wheels.

BA 3413Wheel Adapter set (4) converts theDisco 1, RR Classic or Defender wheelstud pattern to that of a P38 RR orDiscovery 2. (Not suitable for RR/Discopre 92). Some vehicles may requireextended plastic arches.

BA 3415Converts DI2/P38 RR to stud pattern of L322

Note: for use on air sprung Classic Range Rover extended bump stops may be necessarywhen fitting some wheels (eg 18" hurricane)

BA 3413

WHEEL SPACERSKit of 4 Spacers in alloy with allstuds and nuts

BA 341030mm RR Classic


CLASSIC


acce

ssor

ies

93


IGNITIONLEAD SETSFOR V8ENGINES

BRA 2001 – Tosuit early 4.0L and4.6L up to XABRA 2002 – Tosuit late 4.0L and4.6L up to XA

SPECIAL EQUIPMENT

– ELECTRICAL

NEW!!HALO H4UNITSBearmach stock aselection of lightsfor the Defender,Series 3 and classicRR. Not E marked.

BA 070C – Crystal Clear H4 UnitBA 070HI – Halo Ions Gold Effect H4 UnitBA 070HC – Halo Crystal Clear H4 Unit

LUMENITION KITS

Do away with the points andreplace with breakerlessignition system for increasedefficiency and accurate tuning.

BA 137– V8 fitting kit

To fit the above kit you willalso need:BA 140– Ignition module

ELECTRIC FAN KITSThe electric fan kit replaces the belt driven unit. Simply remove fan fromwater pump hub, then fix electric fan through radiator with special fixings.

BA 031 Secondary Electric fan Kits. Suitable for all Land RoversBA 031A Primary Double Electric fan Kit. For extra coolingBA 031T Thermostat to suit above

It’s all very well having the best vehicle forsome off-road adventures but here’s a fewcreature comforts to enhance your RangeRover’s interior.

INTERIOR ACCESSORIES

DOG GUARD for Range Rover ClassicMade from 2" wire mesh welded to frame for a rattle free construction. Blacknylon coating. Easy to install and remove. Rear seat can be folded downwithout removing Dog Guard. Will fit both 2 and 4 door models.

BA 077 Fits models up to 1986BA 077/4 Fits models from 1987 to 1994

OEM DOG GUARDAs supplied as original equipment. All Metal construction with horizontalbars, not mesh. (Not illustrated).BA 143 Original Equipment Dog Guard with bars.

GUN RACK

BA 087 – To fit dog guardsfor Range Rover.

An easy clip on addition tothe discovery dog guard.Supplied as pairs, thesebrackets allow guns orumbrellas to be carried oneabove the other.

BA 077

BA 087

INERTIA REELSEAT BELTS3 point cap and diagonal.Can be used asreplacement for RangeRover Classic or as retrokit for earlier models.Early vehicles may requireadditional brackets.

SEAT BELTSBA 188A – Suit rear Range Rover ClassicBA 187 – Lap belt

inter

ior a

cces

sorie

s


CLASSIC


acce

ssor

ies

94


SOUND PROOF FELT

Sound deadening felt with peel backadhesive. Adds extra sound proofingin the cab and under bonnet area.

BA 2009 – Roll of self adhesivesound-proofing felt (54” x 36”)

MATSHard-wearing Mat sets specifically shaped to suit all Range Rovers. All matshave in-built heel pads on both sides for longer life. Please specify colourwhen ordering.

BA 048 3 Piece mat set in Brown – 2 DoorBA 048A 3 Piece mat set in Beige – 4 DoorBA 048B 3 Piece mat set in Grey – 4 DoorBA 058 Rear cargo area mat in Grey – 4 DoorBA 059 Rear cargo area mat in Brown – 2 DoorBA 062 Rear cargo area waterproof mat in GreyBA 063 Rear cargo area waterproof mat in Brown

WATERPROOF SEATCOVERS

Pair of Waterproof Seat Coversavailable in Grey. Tailored fitting,quickly and easily fitted and removed.Ideal for farmers, builders, surveyorsand all outdoor activities.

BA 064 – To fit Range Rover Classic

SEAT HEATER

Seat Heater available built-in tonew seats or DIY kit to fit insideyour seats. With full fittinginstructions wiring loom andswitches. Sold for pairs of seatsonly.

BA 2410 – Heater (pair)

BA 2410

MOUNTNEYA plastic moulded steering wheel - especially designed for comfort with anergonomic grip area.BA 3202 Black moulded steering wheel

A classic wood wheel with high gloss finish and 3 chrome spokesBA 3203 Wood Rim Steering

Wheel

MOMOThese are quality genuine leathersports steering wheels ideal forthe rigours of off-roading.BA 3207 Black Leather WheelBA 3208 Black Alcantara

Wheel

Steering Wheel BossesBA 3206 Boss to suit steering wheels BA 3202 – BA 3208

We have a range ofquality, stylish steeringwheels from MOMO,RAID, SPARCO andMOUNTNEY for allDefender applications –together with bosses tosuit. More styles are beingadded every day.

3 SPOKE WHEELThree spoke design chrome or black spokesavailableBA 150 14" Vinyl wheel.BA 151 15" Leather wheel

Steering Wheel Boss to suit Range Rover Classicup to 1986BA 155 Steering Wheel Boss to fit BA 150

and BA 151

STEERING WHEELS

inter

ior a

cces

sorie

s


Documents

accessories RANGE ROVER - LanDrive - RRcla_10th_access_lo.pdf · Range Rover P38 95~98 Range Rover L322 99~100 4x4 Essentials Wheels, Covers & Tyres 102~103 Winches & Winching Equipment