Accessories pdf

24 www.cantorque.com

CanTorque Backup Wrenches

Heavy duty industrial construction.

Ergonomic and Safe.

Totally Mechanical - No Hydraulic.

Easy to release.

Eliminates Striker Wrenches, Shims a Vice Grip Style Backup Wrenches.

Stock in Standard and Metric Sizes.

Features :

CanTorque Backup Wrenches

Technical Details:

BC-19M 19 BC-46M 46 BC-012 3/4 BC-200 2

BC-22M 22 BC-50M 50 BC-014 7/8 BC-203 2.3/16

BC-24M 24 BC-55M 55 BC-100 1 BC-206 2.3/8

BC-27M 27 BC-60M 60 BC-102 1.1/8 BC-209 2.9/16

BC-30M 30 BC-65M 65 BC-104 1.1/4 BC-212 2.3/4

BC-32M 32 BC-70M 70 BC-107 1.7/16 BC-215 2.15/16

BC-36M 36 BC-75M 75 BC-1 10 1.5/8 BC-302 3.1/8

BC-41M 41 BC-80M 80 BC-1 13 1.13/16

Metric Sizes Standard Sizes

Part No.Part No.Part No. Part No. inch inchmmmm

CTBW -1 Wrench Handle

Technical Details:CTBW-1 Wrench Handle

Standard Sizes Metric Sizes

Part No. Inch Part No. Inch Part No. mm Part No. mm

CTBW-012 3/4 CTBW-200 2 CTBW-19M 19 CTBW-46M 46

CTBW-014 7/8 CTBW-203 2 3/16 CTBW-22M 22 CTBW-50M 50

CTBW-100 1 CTBW-206 2 3/8 CTBW-24M 24 CTBW-55M 55

CTBW-102 1 1/8 CTBW-209 2 9/16 CTBW-27M 27 CTBW-60M 60




CTBW-113 1 13/16 CTBW-41M 41 CTBW-80M 80

Features:• Heavydutyindustrialconstruction.

• ErgonomicandSafe.

• TotallyMechanical-NoHydraulic.

• Easytorelease.

• EliminatesStrikerWrenches,Shims

andViceGripStyle

Backup Wrenches.

• StockinStandardandMetricSizes

Heavy Duty Handle


Torque MultipliersHandtorque - Multipliers

What is a Torque Multiplier?It is a simple gear box, works on the principle of ‘Epicyclic Gearing’. The given load at the input gets multiplied as per the multiplication factor and transmitted at the output, thereby with a minimum effort you achieve greater load.

How do They Work?Handtorque multipliers incorporate an ‘Epicyclic’ or ‘Planetary’ gear train having one or more stages. Each stage of gearing increases the torque applied by a factor of 5, allowing to offer multipliers in ratios of 5:1, 25:1 and 125:1. In the planetary gear system, torque is applied to the input gear or ‘Sun’ gear. Three or four planet gears whose teeth are engaged with the sun gear and therefore rotate. The outside casing of the multiplier, or ‘Annulus’ is also engaged with the planet gear teeth, and would normally rotate in the opposite direction to the sun gear. A reaction arm prevents the annulus from rotating, and this causes the planet gears to orbit around the sun. The planet gears are held between input and output plate which also holds the output square drive. Therefore, as the planetary gears orbit around the sun gear, and the output plate, the square drive turns.

Why use a Torque Multiplier?Safety - Use of long levers can be dangerous. Torque multipliers mean a reduction in the lever length or operator effort by a factor of 5, 25 or 125.Space Limitation - The use of a long lever may be impossible due to restricted space.Accuracy - Torque will be applied most accurately when it is applied smoothly and slowly. Torque multipliers enable this by removing much of the physical effort from the tightening task.

Advantages of Torque Multipliers:• Theratiostatedisthetruetorquemultiplicationfactor.• Nocorrectionchartsareneededtodeterminetorqueoutput.• Strong,safeAnti-windupratchetavailableonmostmodelsforsafeandcomfortableoperation.• Awiderangeofalternativereactionarmsareavailableaspercustomersrequirement,makingtheTorqueMultiplieradaptableto many applications.

25 Revolutions

Input 200 N.m

= Torque

= Velocity

Output 5000 N.m

0.84 Revolutions

www.cantorque.com 27

Torque Multipliers

Anti Wind-Up Rachet (AWUR):With any high ratio gearbox (25:1 or more) a certain amount of wind-up (spring) has to be taken up before any useful tightening work is applied to the nut.

Each time the input device is released, the wind-up will rotate it back against the direction of operation.

The Anti Wind-Up Ratchet retains all of the wind-up forces as they are created, with the following benefits:

1. The torque input device can not fly backwards against the direc-tion of operation if it is suddenly released.

2. Without an Anti Wind-Up Ratchet, it will often be necessary to continue to make 360 sweeps with the torque input device other-wisethemultiplierwill‘unwind’.However,obstructionswilloftenmake this impossible.

3. With an Anti Wind-Up Ratchet fitted, the multiplier becomes locked onto the nut because the reaction plate is held hard against the reaction point. This means that even used upside down, the multiplierwillsupportit’sownweight.

Multiplier behaves like a very stiff ‘Spring’

Multiplier will achieve maximum torqueonly after the ‘Spring’ has been taken up.

In this application, if it takes more than 180°to take up the wind-up at the required

torque, this tightening operation will beimpossible without an ‘Anti Wind-Up Ratchet’.

SaFeTy NOTe : additional support is recommended as failure in the bolt, socket or multiplier will release the wind-up forces and cause the multiplier to drop.

= Torque

= Reaction For


Torque Multipliers

Handtorque - Standard SeriesHandtorque - Standard Series

Features :Accuracy better than +_ 4%.

Precision tightening and loosening of all heavy duty fasteners.

Low energy input with high torque transfer.

Higher capacity multipliers are furnished with strong ratchets (Anti-wind up mechanism) allowing jobs to be performed easily ,

ef�ciently, and safely.

Precision Manufacturing ensures long life and premier quality.

A groove on output Square breaks if over loaded in excess of 20% of its capacity.

Highest possible load factor is guaranteed due to design and use of forged components.

* Including reaction plate.

Standard Series, to 47500 N.m

6000 4500 25 1/2 1.1/2 168 226 115 310 22.00 48.40

9500 7000 25 3/4 1.1/2 195 256 150 350 33.00 72.60

9500 7000 125 1/2 1.1/2 195 301 150 350 35.50 78.10

17000 12500 25 3/4 2.1/2 220 360 164 480 52.00 114.40

17000 12500 125 1/2 2.1/2 220 404 164 480 57.00 125.40

47500 35000 125 3/4 2.1/2 315 550 164 480 80.00 176.00

BTM-5

BTM-5/25 2700 2000 25 1/2 1 136 163 89 260 11.50 25.30

BTM-6 3400 2500 5 3/4 1.1/2 136 149 105 260 9.20 20.24

BTM-6/25 3400 2500 25 1/2 1.1/2 136 176 105 260 12.00 26.40

2700 2000 5 3/4 1 136 135 89 260 8.40 18.48

BTM-7/25Fitted with A WUR



BTM-1 1/25Fitted with A WUR

BTM-1 1/125Fitted with A WUR


Model No.Weight*C apac ity

InputSquare

Aø

OutputSquare

Cmin

CmaxRatio

inchinch mmN.m Ibf.ft mm

B

mm mm kg lbs

BTM-7 6000 4500 5 3/4 1.1/2 168 174 115 310 18.00 39.60

C

B

A

Torque Multipliers

Features:• Accuracybetterthan+_4%.

• Precisiontighteningandlooseningofallheavydutyfasteners.

• Lowenergyinputwithhightorquetransfer.

• Highercapacitymultipliersarefurnishedwithstrongratchets(Anti-windupmechanism)allowingjobstobeperformedeasily,effcientlyandsafely.

• Precisionmanufacturingensureslonglifeandpremierquality.

• Agrooveonoutputsquarebreaksifoverloadedinexcessof20%ofitscapacity.

• Highestpossibleloadfactorisguaranteedduetodesignanduseofforgedcomponents.

Standard Series, to 47500 Nm

Model No. Capacity Ratio Input output A B C C Weight* Square Square min max Nm Lbf/ft inch inch mm mm mm mm kg lbs

BTM-5 2700 2000 5 3/4 1 136 135 89 260 8.40 18.48

BTM-5/25 2700 2000 25 1/2 1 136 163 89 260 11.50 25.30

BTM-6 3400 2500 5 3/4 1 1/2 136 149 105 260 9.20 20.24

BTM-6/25 3400 2500 25 1/2 1 1/2 136 176 105 260 12.00 26.40

BTM-7 6000 4500 5 3/4 1 1/2 168 174 115 310 18.00 39.60

BTM-7/25 6000 4500 25 1/2 1 1/2 168 226 115 310 22.00 48.40Fitted with AWUR







Nano Series Torque Multiplier

Slim Torque Multipliers

Slim - Compact in Size

Model No. Capacity Ratio Sq. Drive (inch) A B Weight (Kg)

Kgm. Lbf/ft Nm Input output mm mm Without Box With Box

NANO - 17 170 1250 1700 5:1 1/2 3/4 107 115 3.80 4.80

NANO - 28 280 2033 2750 5:1 3/4 1 107 126 3.90 4.90

Features:

• Compact,HeavyDutyTorqueMultiplierwithatorque multiplication of 5:1.• Accuracybetterthan+4%withhighrepeatability.• Providedwithdetachablereactionhandle.• Optionaloffsetreactionarmalsoavailableondemand.• Suppliedinsturdymoldedplasticcarryingcasefor better storage and handling.

417107

220

B

A

STM-1 STM-2STM-3

Features:• CompactSize:Compactinsizehencecanbeusedinconstrainedareas.• Ratio:Higherreductionratioforlowinput.• Safety:Safetyshearpinattheinputprovisionedtopreventoverloading.• AWUR:InbuiltAnti-WindupMechanismreducesoperatorseffort.Canbeusedwithnon-ratchettypetorquewrench.• PinLock:PinLockmechanismatoutputSq.Driveforpositivelockingofsocket.• ReactionArm:Differenttypeofreactionarmavailableasperuserrequirement.• Accuracy:Betterthan+-4%withveryhighrepeatability.

198A

B

C

DD

C

B

A

Model STM-01 STM-02 STM-03

A 81 88 88

B 133-175 272 272

C 165 141 151

D 149 207 217

Model No. Torque Capacity Reduction Sq. Drive o.D. Weight Recommended

Nm Lbf/ft Kg m Ratio Input output mm kg Torque Wrench

STM - 1 2500 1845 255 1 : 8 1/2” F 1” 81 4.3 CTC-250

STM - 2 3200 2362 326 1 : 10 1/2” F 1” 88 6.3

STM - 3 4200 3100 428 1 : 10 3/4” F 1 1/2” 88 6.8 CTC-600

Note: STM-2 and STM-3 are fitted with Anti-Wind-Up Ratchet (AWUR ) Mechanism. S TM-1 can be provided with AWUR .


Power Splitters

Features:• Safe:Nosparks.Noflames.Norisktovolatilesurroundings.Nohammersorimpactneeded.Noflyingfragments.

• Fast:Cutsa3”nutin20to30secondsvs.approx.20minuteswithahammer&chiselortorch.

• EasySetup:Youcanbeupandawayinlessthan5minutes.

• NoDamagetoboltorstudthreadsbycalibratingthechiselsothatonlythenutiscut.

• Versatile:Powersplitterscutthehardestnuts.

F

15°

D

AB

CS WING

D

E

Features :Sa fe : No sparks . No �ames . No risk to volatile surroundings. No hammers or impact needed. No �ying fragments.Fast : Cuts a 3” nut in 20 to 30 seconds vs. approx. 20 minites with a hammer & chisel or torch.Easy Set up : You can be up and away in less than 5 minites.No Damage to bolt or stud threads by calibrating the chisel so that only the nut is cut.Versatile : Power splitters cut the hardest nuts. The range of models offered and the range of each model compares very favorablyvs. the competition.

PS-105 11 - 22 16 - 36 38 271 60° 10 38 105 10.65 23.40PS-200 22 - 32 7/8 - 1.1/4 36 - 51 1.7/16 - 2 38 287 45° 13 54 108 11.25 24.80PS-204 32 - 38 1.1/4 - 1.1/2 46 - 60 1.13/16 - 2.3/8 57 385 30° 14 64 164 35.65 78.40PS-210 35 - 45 1.3/8 - 1.3/4 57 - 70 2.1/4 - 2.3/4 57 398 30° 18 73 164 36.55 80.40PS-308 45 - 57 1.3/4 - 2.1/4 70 - 89 2.3/4 - 3.1/2 78 460 30° 19 99 214 75.15 165.30PS-314 50 - 64 2 - 2.1/2 79 - 98 3.1/8 - 3.7/8 80 488 30° 22 108 214 82.00 180.40PS-404 64 - 70 2.1/2 - 2.3/4 95 - 108 3.3/4 - 4.1/4 95 579 60° 29 118 251 106.00 233.30PS-500 76 - 83 3 - 3.1/4 114 - 127 4.1/2 - 5 105 590 60° 29 137 251 110.50 243.10P S -506 83 - 8 9 3.1/4 - 3 .1/2 124 - 1 36 4.7/8 - 5 .3/8 105 598 60° 29 149 251 108.45 238.60

7/16 - 7/8 5/8 - 1.7/16

ModelNo.

WeightA B C D E FStudDiameter

mm mm mmmm mmmm mminch inch kg lbs

Nut A /FAcrossTheFlats

Power Splitter

ModelNo.

WeightA B C D E FStudDiameter

mm mm mm mm mm mm mminch inch kg lbs

Nut A /FAcrossTheFlats

Power Splitter Angle Headed

PS-100AH 11 - 16 7/16 - 5/8 13 - 24 1/2 - 1 17.5 190 30° 6 65 72 4.40 9.70PS-105AH 11 - 22 7/16 - 7/8 16 - 36 5/8 - 1.7/16 38 280 60° 10 70 105 12.65 27.80PS-200AH 22 - 32 7/8 - 1.1/4 36 - 51 1.7/16 - 2 38 290 45° 13 95 108 13.65 30.00PS-204AH 32 - 38 1.1/4 - 1.1/2 46 - 60 1.13/16 - 2.3/8 57 410 30° 15 108 164 38.10 83.80PS-210AH 35 - 45 1.3/8 - 1.3/4 57 - 70 2.1/4 - 2.3/4 57 420 30° 18 130 164 39.40 86.70PS-308AH 45 - 57 1.3/4 - 2.1/4 70 - 89 2.3/4 - 3.1/2 78 500 30° 20 160 214 78.65 173.00PS-314AH 50 - 64 2 - 2.1/2 79 - 98 3.1/8 - 3.7/8 80 510 30° 23 175 214 92.15 202.70

For Removing Frozen Nuts the Right Way

Power SplitterModel - PS-105toModel - PS-506

Power Splitter Angle HeadedModel - PS-100AHtoModel - PS-314AH

For removingfrozen nutsthe right way.Other anglesplittersizes quoted onrequest.

F

A

S WING

B

C

E

D

Power Splitters

For Removing Frozen Nuts the Right Way

Power Splitter Power Splitter Angle Headed

Power Splitter

Power Splitter Angle Headed


Power SplittersPower Splitters

Note : Shades overlapping into multiple model numbers indicate common parts.

1 Housing2 Set Screw3 Allen Wrench4 Chisel5 Chisel Holder6 Spacers Set7 Set Screw for Chisel Holder8 Allen Wrench for Chisel Holder9 Hydraulic Cylinder

10 Quick Disconnect Female Coupler11 Allen Wrench for Cap Screws12 Socket Head Cap Screw (2 each)13 Handle for Housing (2)14 Hex Nut for Handle (2)15 Lifting Eye16 Tool Box (Not Shown)

PS100

Sr.No.

DescriptionModel

Type 2Type 1

POWER SPLITTER with externally threaded chisel holders; used

in nut splitters with internal threads in the piston rod.

TYPE 1POWER SPLITTER that have a cylinder with threaded Bolt holes

in the piston rod and chisels holders that use socket head cap screw.

TYPE 2

Power Splitter Part List :

Versatile : One model cuts a wide range of nut sizes (6-8) Vs. 1-2 of the competition. Hydraulic Cylinders and other common parts amongmodels reduce inventory (refer parts list below for common parts).Flexible : Housing is designed to �t virtually any application so you can work from more angles and in tighter spaces.Power Splitter �ts all API and ANSI �anges and all valve bonnets. It cuts virtually any shape nut (Hex, square and 12 point).Durable : Our heat treatment processes and cryogenic treatment of housings and chisels ensure life second to none. Chisels can beresharpened after dozens of cuts to prolong life.Precise : Chisel can be calibrated by using suitable holder to cut the nut wall precisely so that the bolt or stud does not get damaged.No damage to your equipment and no damage to your Power Splitter.Power : Power to weight ratio is the best in the industry and it is easier to handle.Economical : Price is among the most competitive available anywhere in the world.Warranty : For a full 6 months from defects in materials or workmanship.Variety of Pumps : Power splitter can be supplied with a variety of hand, foot operated, electric or air powered pumps.

Please contact us for choices of available pumps.

Power Splitter Vs. the competition :

105413

15

14

1 2

3

7

89

1065124

13

15

14

1 2

3

11

78 9

This hand pump is specially designed for Splitter applications. The pump is compact and light in weight

with longer handle needing very little e�ort to generate max working load.

Model No.Max

Pressure TypeOil Tank

Cap. Size

liters

Flow Rate

cmCT-HP10-1 700 2.8 Single Stage 1.8 56 x 16 x 19CT-HP10-2 700 2.8 Single Stage 2.2 71 x 16 x 20CT-HP14-2 950 2.8 Single Stage 2.2 71 x 18 x 20

CT -HP10-3D 700 49/2.8 Double Stage 3.0 50 x 18 x 35CT -HP10-5D 700 49/2.8 Double Stage 5.0 50 x 18 x 35

bar cc

Hand Pumps

PS105 PS200 PS204 PS210 PS308 PS314 PS404 PS500 PS506

POWER SPLITTER with externally threaded chisel holders; used in nut splitters with internal threads in the piston rod.

POWER SPLITTER that have a cylinder with threaded bolt holes in the piston rod and chisels holders that use socket head cap screw.

Documents

Accessories pdf