ACCESSORIES

Specs Switch This is a sensitive switch for those people with very limited hand use. It has to be plugged into an E.C.U. transmitter (B) below. 1-3/8” activation surface.

(B) E.C.U. Transmitter

This transmitter has a 1/8” mini-phone jack on the side surface. Also includes a 1/8” mini phone plug with 30” of cable. This kit is used to allow activation by E.C.U. and custom switches. Momentary contact closure required for

activation. Size 3.25””x 1.25”x 0.5”.

(C) Keychain Transmitter

This transmitter is for use by individuals who have full hand use. Small size allows storage in purse or chair side pouch. Size 2.5””x 1.375”x 0.5”

(D) Standard Transmitter

(E) Keyless Entry Pad

Wireless keypad for mounting on outside of door. Stops dependence on keys for care providers. Allows them to enter by pushing a 4-digit combination code which can be changed easily when care provider is no longer a member of the household staff. Size: 7”” x 2.5” x 1.25”

(FT) Wireless Wall Touch Pad

This transmitter is for mounting on a walland can be used for residential settings. Itcan also be mounted on a wall next to abed to remotely allow others to enter aresidence. Size: 3.5””x 2.375”x 1”

(FL) &(FN) Large or Narrow Wireless Wall Push Pad

These push pads come in two sizes They are designed formore abusive environmentsand are very tamper-proof, with a thick metal push plate,handicapped logo and

(H) 2-Button Transmitter

This transmitter can be used withtwo doors, one button for eachdoor. Size: 3.25””x 1.25”x 0.5”

(I) 4-Button Transmitter

This transmitter is used in applicationwhere 4 buttons are required. Size: 3.25” x 1.25” x 0.5”

”Push to Open”.”Sizes: Large version is 5””sq. x2.125”. Narrow version is 4.75” x 1.75”

(FW) 36” Vertical Pushpad 6” Wide

As provided in the Public Bundled Package “Special” version.36” high x 6” wide wireless wall mounted switch, with wheelchair logo and “Push to Open” label. Can be used in locations where normally an upper and lower switch would be needed.

Proximity Tag Reader System

The tag can be kept on the wheelchair and the door can be triggered to open at 3, 6 or 9 feet away, with no hand use required. One reader will work from both sides of the wall. Comes with two proximity tags.

This transmitter may be mounted below the wheelchair armrest or a side panel.Includes a sensitivity paddle to make it easier to push.

Size: 3.25” x 1.25”x 0.5”