ACCESSORIES ENCORE SOFT-SIDED GUN CASE...TC_Catalog_Accessory_Section-2019.indd 61 12/22/18 11:18 AM CLEANING & MAINTENANCE T/C ® PRO HUNTER TOOL This tool can be used to remove and

WARNING: Cancer and Reproductive Harmwww.P65Warnings.ca.gov





ENCORE® RIFLE CASE WITH BARREL POUCH• Full length soft rifle case fits rifle with or without scope• Side pouch holds one extra scoped barrel• Thoroughly padded for excellent protection• Inside Dim: 42˝ L x 7 1⁄2˝ H x 1 1/2˝ D• Barrel pouch Dim: 33” L x 6 1/2” H x 2 1/4” D

HUNTER’S BINO STRAP• Securely holds binoculars close to the chest• Adjustable elastic straps to guarantee perfect fit• Heavy duty synthetic materials are

designed to be scent resistant• Multiple mounting options

HP NEO RIFLE SLING• Constructed of heavy duty, padded neoprene • Adjustable for wide range user heights and rifle sizes• Shoulder strap is slip resistant • Quick-detach swivels included

SPEED SHOT SLING WITH SPEED SHOT AMMO TUBES• Constructed of heavy duty, padded neoprene • Includes two accessory Speed Shots• Adjustable for wide range user heights and rifle sizes• Shoulder strap is slip resistant • Quick-detach swivels included

SOFT-SIDED GUN CASE• Fits any scoped T/C® Muzzleloader or Centerfire rifle• Embroidered T/C® logo along the side• Soft padded sides and bottom• Heavy duty reinforcement along bottom edge• 3-zippered accessory pockets along right side

SKU: 35009700

SKU: 35007478 SKU: 110117

SKU: 31007502 SKU: 35009701

• Full wrap around nylon carry handles• Heavy duty nylon construction• Will accommodate a rifle up to 47” long• Outside Dim: approx. 50” L x 10” H x 3” D

61

AC

CE

SS

OR

IES

MA

GA

ZIN

ES

& C

AS

E S

LIN

GS

TC_Catalog_Accessory_Section-2019.indd 61 12/22/18 11:18 AM

CLEANING & MAINTENANCE

T/C® PRO HUNTER™ TOOLThis tool can be used to remove and replace the grip cap, grip, forend and can be used to adjust the rear sight. Allows removal or replacement of the choke tube in 45 Colt/410 ga barrels.

WEDGE PIN PULLERMade of hardened steel. Taps out the forend wedge enough for claw end to pull it free. Also has a nipple wrench that fits all T/C® nipples that take #11 except for T/C® Scout™.

XT BREECH PLUG WRENCHDesigned as a backup tool for all Speed Breech XT® Models

IMPACT!™SB BREECH PLUG WRENCHPrecision steel tool to make removing and installing the breech plug in your Impact!™SB muzzleloader easy.

NIPPLE WRENCHMade of hardened steel. Fits all #11 nipples (except T/C Scout) and fits musket cap nipples.

RAMROD ACCESSORY KIT, WITH STANDARD BULLET PULLERA combination of the most popular ramrod accessories in one pack. Includes: • Worm (patch puller)• Bronze Bore Brush• Super Jag• Standard ball & bullet puller• Cotton bore swab

ENCORE® BARREL REMOVAL TOOLAllows easy removal of barrels.





SKU: 35007992

SKU: 31007062 SKU: 31007747 SKU: 1093582

SKU: 51017482 - For #11 Nipple OnlySKU: 51017064 - For #11 and Musket Nipple

SKU: 31007234 - .45calSKU: 31007298 - .50cal

SKU: 31007240 - .50cal

SKU: 35007503

RAMROD ACCESSORY KIT, WITH PRO HUNTER™ BULLET PULLERA combination of the most popular ramrod accessories in one pack. Includes: • Worm (patch puller)• Bronze Bore Brush• Super Jag• Pro-Hunter™ ball & bullet puller with aluminum alignment tool• Cotton bore swab

62

T/C® ACCESSORIES


POWDER SPOUTSMakes it easier to pour black powder or black powder substitute without spilling.


SKU: 31007223 - Pyrodex® or Blackhorn 209

T/C® PRIMER CADDYHolds a reserve of 209 primers. Keeps them clean and dry and easy to find. Holds 9 primers and stays flexible in the cold weather.





SKU: 31007891

SKU: 51169009 SKU: 51169010 SKU: 51169014

DOG-BONE 209 PRIMING TOOLDurable polymer 209 priming tool holds two 209 shot sell primers on each end. Holds a reserve of 6 primers on main shaft.


SKU: 31007808

U-VIEW® IN-LINE CAPPERDesigned specifically for use with any muzzleloaders that use a musket cap or primer. Holds eight caps or primers.


SKU: 31007233 - Musket Caps OnlySKU: 31007219 - 209 Primers Only

209 FLEX CAPPERDurable, flexible polymer 209 capper presents two 209 shotshell primers, one at each end, while storing six more. Includes lanyard hole.


SKU: 35008007

IN-LINE CAPPER FOR #11 CAPSSolid brass body with steel jaws. Allows the plunger spring to be locked in compressed position for easy loading. American Made. Holds 17 #11 percussion caps.


SKU: 31007025

PRO HUNTER™ BULLET PULLERSpecially designed for removing spire point and polymer tipped bullets from the bore of a muzzleloader. Fits 10-32 thread, .50 caliber.

WORM (PATCH PULLER)Used for field cleaning or to retrieve a cleaning patch which is lost in the bore. Solid brass with strong spring steel fingers, fits all T/C® muzzleloading calibers.

BALL, BULLET & WAD PULLERThreads onto ramrod and successfully removes stuck balls, bullets or shotgun wads from the bore of a muzzleloader. Fits 10-32 threads, .45 and .50 calibers.

63

AC

CE

SS

OR

IES

CL

EA

NIN

G &

MA

INT

EN

AN

CE



MUZZLELOADER CLEANING JAGSolid brass cleaning jag holds patches against bore for effective cleaning.Fits 10–32 thread ramrod.

SUPER JAGKnurled to provide maximum contact between patch and bore. Long stepped shank prevents patches from binding. Concave tip allows use for loading with spire point bullets. Fits 10-32 threads.

REPLACEMENT O-RINGSReplacement O-Rings for the T/C® STRIKE™ Muzzleloader. For use on Primer Adapter Plugs. Quantity pack of 3.

IMPACT!™SB REPLACEMENT O-RINGSReplacement O-Rings for the Impact!™SB Muzzleloader. For use on Primer Adapter Plugs. Quantity pack of 3.









SKU: 54169241 - .45calSKU: 54169243 - .50calSKU: 54169245 - .54cal

SKU: 3005294 SKU: 1094269

SKU: 3005562 SKU: 35009507 SKU: 35009508

SKU: 54169071 - .45calSKU: 54169067 - .50cal

SKU: 51169085 - .50calSKU: 53169084 - .54 and 56cal

SKU: 54167227 - .45calSKU: 54169087 - .50cal

UNIVERSAL LOADING TIP & CLEANING JAGKnurled brass loading tip that will handle spire point bullets, hollow point conical bullets or round nose bullets. The contour fits all three types, preventing deformity of the tip during the loading process. Fits 10-32 thread ramrod or short starter.

EXTENDED SUPER JAGKnurled to provide maximum contact between patch and bore. Long stepped shank prevents patches from binding. Concave tip allows use for loading with spire point bullets. Adds 3¾˝ to ramrod. The Extended Jag is necessary for cleaning all 28˝ muzzleloader barrels. Fits 10-32 threads.

BREECH AND FIRE CHANNEL BRUSH SETBrushes designed specifically to clean the breech area and the fire channel of the T/C® STRIKE™ muzzleloader.

BREECH PLUG CLEANING BRUSHMakes cleaning the removable breech plug in a T/C® In-line a snap. Long enough to reach into the threads in the barrel/receiver, as well.

BREECH BRUSH & FIRE CHANNEL BRUSHESIncludes the Breech Plug Cleaning Brush and Fire Channel Brush for cleaning your T/C® muzzleloader.

64

T/C® ACCESSORIES



IN-LINE NIPPLE PICK Brass housing with extended bent arm houses a fine wire. Pushing the button forward extends the wire. Fits all in-lines and is easy to use even when rifle is scoped. Lanyard bail allows for secure attachment.


SKU: 31007244

SKU: 35009500 - 10-32 thread, .45calSKU: 31009405 - 5/16-27 thread, .50calSKU: 35009502 - 10-32 thread, .50calSKU: 35009504 - 10-32 thread, .54cal


SKU: 31007465


SKU: 35009514 - .50calSKU: 35009516 - .54cal

BREECH THREAD CLEANER FOR ENCORE® & OMEGA™

Cleans the breech threads in the barrel with the thread cleaner. The thread cleaner eliminates the need to brush or patch the breech of the barrel.


SKU: 31007499

PRIMER ADAPTER PLUGSFor use with the T/C® Adapt™ Breech System in the T/C® STRIKE™ Muzzleloader.


SKU: 3005295 - For use with pellet loadsSKU: 3005296 - For use with loose powder

EXTENDED POLYMER CLEANING JAGRugged steel shank with polymer over-molding protects bore during clean-ing. Fits .50 caliber muzzleloaders, 10-32 threads fits most ramrods.

SKU: 54169083

COTTON BORE CLEANING SWABSUsed to clean and oil the bore of a muzzleloader or to apply Natural Lube 1000 Plus™ Bore Butter as a seasoning agent. Fits 10-32 threads.

BRONZE BORE BRUSHESAvailable with 2 thread sizes: 5 ⁄16-27 which fits shotgun cleaning rods and 10-32 threads which fits muzzleloading ramrods.BRUSH & SWAB SET

A bronze bore brush and cotton bore swab sold together. Standard 10-32 threads, for .50 Caliber firearms.


SKU: 35007484

BREECH PLUG CLEANING TOOLSpin the breech plug through the stainless steel bristles to thoroughly clean the threads of your breech plug.

(Does Not fit Speed Breech®)

ENCORE® ADJUSTABLE HINGE PINEncore adjustable hinge pin locks the position of the hinge pin so that it is exactly the same every time. No rotation or drifting from side to side. Fits all standard and Pro Hunter Encore barrels.


SKU: 31007010

65

AC

CE

SS

OR

IES

CL

EA

NIN

G &

MA

INT

EN

AN

CE



NUMBER 13® PRE-SATURATED CLEANING PATCHES2½˝ diameter, 100% cotton patches pre-saturated in Number 13® Bore Cleaner. Works well with .45 – .58cal muzzleloaders. Quantity 100.

GENERAL PURPOSE CLEANING PATCHES2½˝ diameter, 100% cotton patches. Offset their position on the jag, center-ing, or doubling the patch thickness, they will work well with .45–.54 cal. black powder & .375–.45 centerfire.

NUMBER 13® BORE CLEANERIndustry standard for muzzleloader cleaning, compatible with the Natural Lube 1000 Plus™ Bore Butter.

NATURAL LUBE 1000 PLUS™ BORE BUTTER SEASONING PATCHES2½˝ diameter, 100% cotton patches pre-saturated in Natural Lube 1000 Plus™ Bore Butter. Works well with .45 – .58cal muzzleloaders.



SKU: 31007143 SKU: 31007037 - QTY 100/bagSKU: 31007178 - QTY 250/bag

SKU: 31009065 - 8 oz Spray BottleSKU: 31009041 - 8 oz Pour Bottle SKU: 31007357

LOW-ODOR FORMULA

NATURAL LUBE 1000 PLUS™ BORE BUTTER - TUBERust preventative on external surfaces of any firearm. Can also be used to lube bullets. Biodegradable, contains no petroleum-based oil or additives.

SKU: 31007309 - 5 oz Natural ScentSKU: 31007409 - 5 oz Pine Scent

SKU: 31007147 - QTY 25/bagSKU: 31007141 - QTY 50/jarSKU: 31007003 - QTY 100/jar

T/C® IN-LINE CLEANING SYSTEM Works with any .50 caliber in-line ignition muzzleloader.

• 4 oz. Number 13® Bore Cleaner• Bronze Bore Brush .50 Caliber• Super Jag™ .50 Caliber • Cotton Cleaning Patches• Cleaning/Utility Brush • A Silicone Gun Cloth• .75 oz Natural Lube 1000 Plus™ Bore Butter• .23 oz Super Lube Anti-Seize Lubricant

WARNING: Cancer - www.P65Warnings.ca.gov

66

T/C® ACCESSORIES


WARNING: Cancer and Reproductive Harmwww.P65Warnings.ca.govSKU: 31007101

GORILLA GREASE™

An all-natural, anti-seize lubricant formulated for use on the threads of removable breech plugs and nipples. Works with any removable breech plug or nipple. ¼ oz tub.

SKU: 31007356

T/C® BASIC MUZZLELOADER CLEANING KIT• 4 oz Number 13® Bore Cleaner• 2½˝ Cleaning Patches 25pk• Natural Lube 1000 Plus™ Bore Butter saturated cleaning patches 25pk• Bronze bore brush• Knurled brass extended Super Jag™


SKU: 31007333

ALL-PURPOSE ANTI-SEIZE SUPER LUBESynthetic lubricant protects threads of muzzleloading breech plugs as well as shotgun choke tubes from corrosion. ½ oz tube.


SKU: 31007362

ESSENTIAL MUZZLELOADER CLEANING PACK• 4 oz Number 13® Bore Cleaner• .23 oz Super Lube Anti-Seize Lubricant• 100% Cotton cleaning patches• .75 oz Natural Lube 1000 Plus™ Bore Butter


SKU: 31007217

BREECH PLUG LUBE APPLICATOR WITH SUPER LUBE™

Uniformly applies lubricant to the breech threads in the barrel. Super Lube contains PTFE which coats the threads in the breech to prevent the breech plug from getting seized. Works on most break-open and pivoting breech muzzleloaders. Applicator with 1.44 oz.

SKU: 31007497

(Does Not fit Encore Pro Hunter)

HUNTER’S CHOICE MUZZLELOADING ACCESSORY KIT• (1) T-handle short starter/ramrod extension• (10) .50 cal. ShockWave® Sabots w/250 grain ShockWave® Bullets• (1) Flex loader for easy field carry of prepared loads• (1) 4 oz. bottle of Number 13® Bore Cleaner• (50) 2½˝ cotton patches• (25) 2½˝ All-Natural seasoning patches• (1) .23 oz. tube of Super Lube• (1) Universal loading tip/jag• (1) Breech brush


SHOCK WAVE® is a registered trademark of Vista Outdoor and is used under license. 67

AC

CE

SS

OR

IES

CL

EA

NIN

G &

MA

INT

EN

AN

CE



T17® BREECH PLUG GREASESynthetic-based lubricant that withstands the high operating temperatures of muzzleloaders to prevent residue from binding breech plugs. Works well on nipples and shotgun choke tubes. ½ oz tube with applicator tip.

T17® FOAMING BORE CLEANEREffectively cleans and neutralizes the harmful fouling in the bore from black powder and black powder substitutes. Eliminates the need to brush your barrel. 7 oz can.

T17® NATURAL LUBE 1000 PLUS™

Enhanced to work with Hodgdon’s Triple Seven™ powder. An all natural lubricant which reduces foul-ing, improves accuracy and prevents rust. Specially formulated to work with sabot bullets. 3 oz tube.

T17® BREECH PLUG CLEANER/JARSolvent for cleaning breech plugs, no brushing or scrubbing required. Shake for 30 seconds then wipe clean.



SKU: 31007491

SKU: 31007493

SKU: 31007488 SKU: 31007480

SKU: 31007541 SKU: 31007495

SKU: 31007479 SKU: 31007433

T17® BLACK POWDER BORE CLEANER This solvent is specially formulated to effectively clean and neutralize the harmful fouling left in the bore from Triple Seven® and other black powder substitutes. 8 oz. Bottle

T17® MUZZLELOADER BREECH PLUG WIPES Quickly wipe off caked on fouling and grease from breech plugs and between breech plug threads. Works great for traditional black powder and most black powder substitutes. Quantity 50.

T17® FIREARM WIPESHand wipes that coats the firearm with a micro thin layer of protectant that withstands the corrosive effects of black powder fouling. Use these wipes prior to hunting in bad weather. Keeps your firearm in factory condition. Quantity 50.

T17® PRO HUNTER™ ACCESSORY KIT• 2 oz T17® Bore Cleaning Solvent • ½ oz T17® Breech Plug Anti-Seize Grease• 2 ½˝ diameter Dry Cotton Patches• 40 Cleaning Patches• 25 Seasoning Patches• Breech Thread Cleaning Brush• T-handle Short Starter• (10) .50 caliber Super Glide™ Sabots with 250 grain Shock Wave® Controlled Expansion bullets• (2) Speed Shots™

• Extended Polymer Cleaning Jag





68

T/C® ACCESSORIES


T17® SEASONING PATCHESPre-saturated with all-natural Natural Lube 1000 Plus™ lubricant. Reduces fouling, improves accuracy and prevents rust. 2 ½˝ diameter (works well with .45 & .50 cal. muzzleloaders). Quantity 50 patches.

SKU: 31007477

T17® MUZZLELOADER CLEANING KIT• 2 oz bottle T17® Bore Cleaner• 3/4 oz T17® Natural Lube• ½ oz. T17® Breech Plug Anti-Seize Grease• (20) 2 ½ ˝ dry cotton cleaning patches• .50cal Extended Cleaning Jag• .50cal Bronze Bore Brush• Breech thread cleaning brush


SKU: 31007473 SKU: 31007471

T17® OILED PATCHESPre-saturated with oil formulated to prevent rust and corrosion and displace moisture. 2 ½˝ diameter (works with most bore sizes). Quantity 50 patches.

SKU: 31007372

T17® BASIC MUZZLELOADER CLEANING KIT• 2 oz. bottle T17® Bore Cleaning Solvent • 3/4 oz. T-17® Natural Lube• ½ oz. T-17® Breech Plug Anti-Seize Grease• (40) 2 ½˝ dry patches


T17® PRE-SATURATED CLEANING PATCHES100% double knapped cotton patches. Specially formulated to clean and neutralize the corrosive effects of black powder and black powder substitutes. 2½˝ (works well with .45 & .50 cal.). Quantity 100 patches.

SKU: 31007483


SKU: 31007530

All T17® Solvents are specially formulated to work on modern In-line and traditional muzzleloaders. T17® is designed for use in cleaning the corrosive fouling & plastic deposits from muzzleloaders when using Black Powder, pelletized powder, and black powder substitutes like Triple Seven®. This modern formula removes plastic, copper

and lead deposits then leaves a micro-thin layer of protectant behind to help prevent rust and corrosion.

T17® BLACK POWDER CLEANING KITComes with a collapsible cleaning rod. Works with barrels up to 32˝ long.

• 3-piece aluminum rod with molded handle

• 3/4 oz T17® Natural Lube 1000 Plus™

• 2 oz of T17® Bore Cleaner Solvent• T17® Breech Plug Grease• .50 cal Bore Brush• .50 cal Bore Swab• .50 cal Jag• (20) Cleaning patches


SHOCK WAVE® is a registered trademark of Vista Outdoor and is used under license. 69

AC

CE

SS

OR

IES

CL

EA

NIN

G &

MA

INT

EN

AN

CE


SHOCK WAVE® is a registered trademark of Vista Outdoor and is used under license.

MUZZLELOADING PROJECTILES

SHOCK WAVE® BONDED CORE BULLETS IN MAG EXPRESS SABOTSMade for .50 caliber rifles with bonded core construction. Quantity 15.

SHOCK WAVE® BONDED CORE BULLETS IN SUPER GLIDE SABOTSMade for .50 caliber rifles with bonded core construction. Quantity 15.

SHOCK WAVE® CONTROLLED EXPANSION BULLETS IN SUPER GLIDE SABOTSMade for .50 caliber rifles with controlled expansion construction. Quantity 15.

XTP™ BULLETS JACKET HOLLOW POINT IN MAG EXPRESS SABOTSXTP™ bullets are known for their tremendous expansion and are the choice for any big game animals. Quantity 30.

CHEAP SHOT™ SABOTS WITH HOLLOW POINT BULLETSAll-lead 240 grain, hollow point bullet made for .50 caliber rifles. Deep hollow point cavity provides maximum expansion and down range energy transfer. Quantity 20.

SURE FIRE™ JACKETED HOLLOW POINT BULLETS IN MAG EXPRESS SABOTS.45 caliber, 230 grain jacketed hollow point bullet made to go in .50 caliber rifles. Quantity 20.

SUPER 45 XR™ SABOTS WITH HOLLOW POINT XTP™ BULLETSSuperior .40 caliber 155 grain jacketed XTP™ hollow point bullets, for .45 caliber muzzleloaders, provide magnum performance without the recoil. Provide nearly 2 times the expansion of the bullet’s original diameter Quantity 30.

SUPER GLIDE™ SABOTS Super .Glide™ sabots are the first sabots that can be loaded with one hand. Made for .50 caliber rifles. Quantity 50 (sabots ONLY).

SHOCK WAVE® CONTROLLED EXPANSION BULLETS IN MAG EXPRESS SABOTSPolymer tip increases the Ballistic Coefficient for sustained high velocity down range and punches into the pocket to open up the nose cone for fast expansion.










SKU: 17008296

SKU: 17008206

SKU: 17007759

SKU: 17008252 - For .45cal bullets

SKU: 17008207 - For 250 Grain OnlySKU: 17008211 - For 300 Grain Only

SKU: 17008245 - 250 GrainSKU: 17008235 - 300 Grain


SKU: 17008244 - .45cal, 200 Grain, QTY 15SKU: 17008238 - .50cal, 200 Grain, QTY 15SKU: 17008242 - .50cal, 250 Grain, QTY 15SKU: 17008236 - .50cal, 250 Grain, QTY 30SKU: 17008230 - .50cal, 300 Grain, QTY 15

SKU: 17008246 - .50cal, 240 GrainSKU: 17008294 - .50cal, 300 GrainSKU: 17008287 - .54cal, 250 Grain

Bonded Core construction pene-trates tough hide and bone with no

separation of core and jacket.

70

T/C® ACCESSORIES


MAG EXPRESS® SABOTSMade for .50 caliber rifles to use with jacketed or lead pistol bullets. Quantity 50 (sabots ONLY).

MAXI-BALL™

Pre-lubed with Natural Lube 1000 Plus™ Bore Butter to eliminate the need to wipe the bore or clean between shots. Made for .50 caliber rifles. Quantity 20.

MAXI-HUNTER®

Maxi-Hunter bullets gives you maximum expansion on deer-sized game. Pre-lubed with Natural Lube 1000 Plus™ Bore Butter to eliminate the need to wipe the bore or clean between shots. Made for .50 caliber rifles. Quantity 20.



SKU: 17008277 - For .44cal bulletsSKU: 17008281 - For .45cal bullets


SKU: 17007885 - 275 Grain SKU: 17007785 - 350 Grain



SKU: 31007135 - .32-.36calSKU: 31007136 - .45-.50calSKU: 31007137 - .54-.56calSKU: 31007138 - .58cal

SKU: 31007030 - .45-.50cal UNLUBEDSKU: 31007043 - .45-.50cal PRELUBEDSKU: 31007034 - .54-.56cal UNLUBEDSKU: 31007044 - .54-.56cal PRELUBED



SKU: 16008276

PILLOW TICKING ROUNDBALL PATCHESThe tight weave 100% cotton fabric resists tearing and prevents burn-through. Patches are pre-lubricated with Natural Lube 1000 Plus™ Bore Butter. Biodegradable and non toxic. Quantity 100.

SWAGED LEAD ROUND BALLSPure lead .50 caliber, 175 grain roundballs for hunters who prefer (or are required by law) to use patched roundballs in their muzzleloaders. Quantity 100.

100% COTTON ROUNDBALL PATCHES100% cotton patches available un-lubricated or pre-lubricated with T/C® Natural Lube 1000 Plus™ Bore Butter. Biodegradable and non-toxic. Quantity 100.

71

AC

CE

SS

OR

IES

MU

ZZ

LE

LO

AD

ING

PR

OJE

CT

ILE

S

WADE MIDDLETON - WHITETAIL DIARIES


POWDER MEASURES

U-VIEW® BLACK POWDER FLASKSee-thru powder flask small enough to fit in your pocket yet it holds enough powder for a dozen reloads. Easy to control, spring loaded plunger for dispensing powder into a measure.







SKU: 31007224 SKU: 31007048

SKU: 31007040 SKU: 31007102 SKU: 31007152

SKU: 31007222

T/C® MAGNUM POWDER MEASURE For use with any of the in-line T/C® muzzleloaders when using magnum charges of up to 150 grains of Black Powder or Pyrodex® equivalent. Measures in 10 grain increments.

FIELD POWDER MEASURECompact lightweight powder measure with solid brass cup and durable polymer adjusting sleeve marked in 10 grain increments from 20 to 120 grains. Brass locking set screw can be locked into infinite positions.

U-VIEW® POWDER MEASURESee the exact level of the powder in the tube. Includes loading spout that swivels out of the way to fill the measure. Graduated in 5 increments from 15 to 125 grains.

HUNTER’S BLACK POWDER MEASURELightweight powder measure with knurled collet to lock the cavity at any setting from 20 to 120 grains. Has a sliding funnel and calibrated adjusting sleeve made of durable polymer to reduce weight. Marks indicate 10 grain increments.

ADJUSTABLE BLACK POWDER MEASUREPositive snap ring “clicks off˝ each increment of adjustment and holds cavity at desired volume. Measures 50-120 grains in 10 grain increments.

72

T/C® ACCESSORIES


FLINT LOCK RIFLE FIELD KITContains• Pan brush• Jaw tightening rod• Stainless steel touch hole pick




SKU: 31007099 SKU: 31007020 SKU: 31007299

SKU: 31007113 SKU: 51017093WARNING: Cancer and Reproductive Harmwww.P65Warnings.ca.gov

SKU: 31007200

FLINT LOCK PAN CHARGERHolds approximately 80 grains FFFFG (4F) Black Powder. Each dispensed charge fills the pan of a T/C® rifle one-half full.

“BASIC˝ FLINT LOCK ACCESSORY KITWorks with any .50 caliber flint lock muzzleloader. Contains: • (1) Pan Charger• (1) Touch Hole Pick• (2) Flints

FLINT LOCK TOUCH HOLE PICKSDurable polymer “spark proof”. Quantity 2.

FLINT LOCK TOUCH HOLE PICKRugged stainless steel touchhole pick with lanyard loop.

FLINTS FOR MUZZLELOADERSThese high quality rifle flints are recommended for use with all T/C® flint locks. Quantity 4.

• Small screwdriver, with 3 different size blades

• Key ring

* NOTE: The Pan Charger is to be used with black powder only. All implements must be used in accordance with the instructions provided by Thompson/Center.

• (1) Leather Pad• (2) .50 caliber Quick Shots


73

AC

CE

SS

OR

IES

FL

INT

LO

CK

AC

CE

SS

OR

IES


MUZZCHARGER™

MUZZCHARGER™ BLACK POWDER SPEED LOADER• 3-shot revolving cylinder holds pre-measured charges

ready-to-load• Single-stroke loading action seats powder charge and

bullet into barrel in single motion• Universal muzzle clamp aligns charger with any In-line

muzzleloader barrel• Built-in primer holder keeps primers safe and dry• Includes decapping tool for removing stuck 209 primers

from breech plug• Holds up to 150 grains of black powder


SKU: 1078975

Simple 3 step operation!The MuzzCharger™ can hold up to 3 pre-measured loads in a compact easy to access package!

Primer Decapper removes stubborn spent primers and tucks into the casing of the

MuzzCharger™

1. Charge the handle

2. Rotate a speed load into position

3. Charge Muzzleloader!

74

T/C® ACCESSORIES

LARAMY “SASQUATCH” MILLER - LAST OF A BREED


SKU: 51167070SKU: 31007805 SKU: 31007211 WARNING: Cancer and

Reproductive Harmwww.P65Warnings.ca.gov



209 PRIMER ADAPTER FOR BLACK DIAMOND™ & WOODS™ RIFLEPrimer adapter for older model T/C® Muzzleloaders. Must be used with the correct striker.

REPLACEMENT PERCUSSION CAP NIPPLES(For use with No.11 Percussion Caps) For most T/C® Cap Lock rifles. (Except Cherokee™ & Seneca™). ¼-28 threads. Fits many TC® In-lines also (except Encore® 209x50, T/C® Scout™, Omega™ & Triumph® models).

BREECH PLUGSTAINLESS STEEL BREECH PLUG

Thompson/Center™ Breech Plugs are made of the highest quality materials for years of rugged service. As T/C® has evolved, so have our muzzleloaders. Advancements in ex-traction, use, fouling prevention, and cleaning make T/C® Breech Plugs some of the best in the modern muzzleloading market. Below is a chart detailing which Breech Plug works with which model of T/C® Muzzleloader.

ENCORE® 209X50 “E-Z TIP˝ EXTRACTORThe “E-Z Tip˝ extractor for the Encore 209x50 Magnum muzzleloader is an accessory item that allows the extractor to be tipped out of the way for easy removal of the breech plug.

Extractor in Place

ExtractorOut Position

Patent #7,257,917

Speed Breech®, Speed Breech® 3, Speed Breech XT®, Triumph® Speed Breech XT®, Impact!™ Breech Plug and Stainless Steel Breech Plugs all have a limited lifetime warranty.

Item # NAMETriumph® &

Triumph® Bone Collector®

Encore® Pro Hunter XT™

& Encore® EndeavorEncore® Pro Hunter FX™

Encore® &Pro Hunter™

1st Gen ONLY

Encore® 209x50& Omega™ IMPACT!™ IMPACT!™SB

31007542 SPEED BREECH XT X

501000000 SPEED BREECH 3 X

31007523 SPEED BREECH X

31007729 TRIUMPH SPEED BREECH XT X

31007761 IMPACT!™ BREECH PLUG X

31007763 SS BREECH PLUG X

1093597 IMPACT!™ SPEED BREECH X

75

AC

CE

SS

OR

IES

BR

EE

CH

PL

UG

S


BULLET STARTERS & RODS

RUGGED ROD RANGE ROD 32˝ long solid aluminum stock and hard coat anodized. Features a tough polymer palm saver knob for a firm grip when driving down balls, bullets or sabots. Accepts standard 10-32 threaded accessories.







SKU: 31009692 SKU: 35009611

SKU: 31007050 SKU: 34007054 SKU: 31007144

SKU: 31007079

DELUXE BULLET STARTERSimilar to the standard model except that it offers the added feature commonly called a “palm saver˝. This feature offers protection to the hand and is particu-larly helpful when a number of shots are being fired or when a tight fitting ball or bullet is difficult to seat. For use with .45-.58cal

STANDARD BULLET STARTER The purpose of this implement is to start a tight fitting ball into the muzzle and to drive it far enough down the barrel so that it can be handled with the ramrod. For use with .45-58 Cal.

PALM SAVER SHORT STARTERA lightweight, compact short starter with a “palm saver˝ built right into the end.

T-HANDLE SHORT STARTER & RAMROD EXTENSIONFeatures a hardwood handle with a 2-piece solid brass rod, coupled with standard 10-32 threads. Converts your ramrod to a range rod and provides you with extra leverage for firmer, more uniform seating.

FLEX PRIMING PALM SAVERFits over the end of the ramrod to ease pressure on the hand when seating projectile. Made of soft Bio-Flex® molded over a hard fiber core for superior durability. Houses 4 spare 209 primers, with 2 ready for instant priming.


SKU: 1081862

LOAD AND CLEAN POWER ROD• Universal ramrod with cut-to-length design for use with muzzleloader

barrels up to 28”• 5.5” telescoping section allows the ramrod to function as a cleaning rod

on removable breech plug rifle designs• Removable, universal brass bullet seater doubles as a cleaning jag• 10-32 threaded ferrule allows for attachment of additional ramrod

accessories• Compact T-handle folds down and fits into muzzleloader forend,

allowing constant attachment of bullet loading tips

Un-cut max length extended: 30.8”

Power rod unscrews for up to 5.5” extension

Un-cut max length not-extended: 25.4”

T-handle rotates Independently

T-handle folds for storage

76

T/C® ACCESSORIES


UNIVERSAL RUGGED ROD32˝ long solid aluminum ramrod which can be cut to fit a muzzleloader. The seating end of the ramrod is threaded to accept standard 10-32 thread ramrod accessories.


SKU: 31009201 SKU: 31009139

SKU: 31007980 - Universal Power Rod (cut to length)SKU: 31007983 - Encore® Pro Hunter™ & Omega™ (28”barrel)SKU: 31007979 - Encore® Muzzleloader (26” barrel)

SKU: 31007127

SKU: 31007239WARNING: Cancer and Reproductive Harmwww.P65Warnings.ca.gov


SKU: 54169058

UNIVERSAL LIGHTWEIGHT RAMROD31˝ universal ramrod that you cut to the length you need. Lightweight, hollow aluminum. Accepts standard 10-32 thread ramrod accessories.

POWER ROD® RAMROD• Universal Power Rod® for all styles

of muzzleloaders • Works with barrels up to 31˝ in length • Tip accepts 10-32 thread loading and

cleaning tools• Pivoting handle gives maximum grip

and folds in for storageT-HANDLE SHORT STARTER WITH EXTENDED SUPER JAGLightweight, compact short starter with a removable seating end which allows for the conversion of the ramrod into a work rod. Extended Super Jag adds 3¾˝ to ramrod and is necessary for cleaning all 28˝ muzzleloader barrels. 10-32 threads.

T-HANDLE SHORT STARTER & RAMROD EXTENSIONLightweight, compact short starter with a removable seating end which allows for the conversion of the ramrod into a work rod.

T-HANDLE SHORT STARTER WITH UNIVERSAL LOADING TIPSAttaches to ramrod to extend the length. Includes interchangeable tips, short starter, brass loading tips and aluminum seating head.

Patent #6,145,235

RUGGED ROD RAMRODAluminum for T/C Omega™ .45 & .50 caliber, 28” barrel.

SKU: 310099144

77

AC

CE

SS

OR

IES

BU

LL

ET

ST

AR

TE

RS

& R

OD

S


SPEED LOADERS & MISCELLANEOUS

SPEED SHOT™ - 2 PACKThe Speed Shot™ holds a magnum muzzleloader charge for quick follow-up shots. The tubes can be cut to fit specific loads. Speed Shots can be used alone or in conjunction with our sling, belt pouch or stock pouch.

RIP-CORD SPEED LOADERUnique speed loader with a second charge just a quick pull away. Pull the tube away from its top and load a charge. Bottom houses a 209 capper for instant priming plus a spare. Made of bio-flex.

.50 CAL. MAGNUM QUICKSHOT™ VALUE PACK

.50 caliber QuickShot™ with (3) .50 cal. Mag Express® Sabots & 240 grain XTP bullets.








SKU: 31007232

SKU: 31007498SKU: 35009613

SKU: 31007004

SKU: 31007027 - .45cal, GreenSKU: 31007028 - .50cal, RedSKU: 31007029 - .54cal, BlueSKU: 31007104 - .50cal Magnum, BlackSKU: 31007109 - .54cal Magnum, Orange

SKU: 31007057 - .50calSKU: 31007058 - .54calSKU: 31007106 - .50cal mag 4-N-1 QuickShot™

SKU: 35008031 - .45-.50cal riflesSKU: 31007238 - 3 replacement tubes

QUICKSHOT™ LOADING TOOLHolds a pre-measured powder charge, projectile and priming in a water-proof container. Use with patch and ball, Maxi-Ball™ or Sabot. QuickShot™ may be used with either a percussion or flint lock rifle. Quantity 3.

The Magnum QuickShot™ holds a pre-measured powder charge of up to 150 grains of loose Black Powder

or Pyrodex® equivalent - or three Pyrodex® 50 grain

equivalent pellets.

4-N-1 QUICKSHOT™Carries your powder, projectile, cap and serves as your bullet starter. Also holds a 209 Primer in recess on the top. Quantity 2.

Holds pre-measured powder charges (up to 150 grains of black powder or Pyrodex® equivalent or three Pyrodex® 50 grain equivalent pellets).

MUZZLELOADING AMMO TUBES - 3 PACK• Carry spare sabots or Pyrodex® pellets• Can also be cut or sized to accommodate your specific charge with sabot

U-VIEW® FLEX LOADERHolds three loading tubes and four 209 shot shell primers. Accepts magnum charges of three Pyrodex® Pellets with sabot. Made of Bio-Flex.

78

T/C® ACCESSORIES


• Realtree® & associated camouflage & patterns are trademarks & copyrights of Jordan Outdoor Ent, Ltd.• Mossy Oak® & associated camouflage & patterns are trademarks & copyrights of Hass Outdoors, Inc.

• Mossy Oak®, Break-Up Country® and Bottomland™ are trademarks of Haas Outdoors, Inc.• Hogue® & Overmolded® are registered trademarks of Hogue Grips (Aaron Hogue and Patrick Hogue).

• LIMBSAVER® is a trademark of SIMS Vibration Laboratory• Bone Collector® is a registered trademark of Michael Waddell LLC and is used under license.

• XTP® is a registered trademark of Hornady Manufacturing Co.• Pyrodex® is a registered trademark of Hodgdon Powder Company, Inc.• Triple-7® is a registered trademark of Hodgdon Powder Company, Inc.

• Bio-Flex® is a registered trademark of FKuR Kunstoff GmbH.• Super Lube® is a registered trademark of SynCo Chemical Corp.• Maxima® is a registered trademark of WSM Manufacturing, LLC.

• SHOCK WAVE® is a registered trademark of Vista Outdoor and is used under license.• MagPul® and M-LOK® are trademarks of MagPul Industries Corp.

• Caldwell® is a registered trademark of Battenfeld Technologies, Inc.• 10/22® is a Registered Trademark of Sturm, Ruger & Co., Inc.

• Williams™ is a trademark of Williams Gun Sight, Co.• G2™ is trademark of Next Camo, LLC.

LACE-ON BUTTSTOCK FLEX LOADER FOR MUZZLELOADERSFits .50/.45 caliber. Quantity 3 tubes.


SKU: 31007889WARNING: Cancer and Reproductive Harmwww.P65Warnings.ca.gov

SKU: 57167327 SKU: 31007764

TOUCH HOLE BUSHINGSFor T/C® Firestorm™ Flint Lock

BREECH PLUG WRENCH FOR ENCORE® 209X50 & OMEGA™

79

AC

CE

SS

OR

IES

MIS

CE

LL

AN

EO

US


2100 Roosevelt Ave.

Springfield, MA 01104

Customer Service: 866-730-1614

Web: www.tcarms.com

Battenfeld Technologies Inc.

2501 LeMone Industrial Blvd.

Columbia, MO 65201

Customer Service: 877-509-9160

Web: accessories.tcarms.com

E-mail: [email protected]

F O R A C C E S S O R I E SF O R F I R E A R M S

H U N T E R S | S H O O T E R S | C O L L E C T O R S

J o i n t h e T h o m p s o n / C e n t e r C o l l e c t o r s A s s o c i a t i o n

P . O . B O X 1 8 1 1 1 | O K L A H O M A C I T Y , O K | 7 3 1 5 4

W W W . T H O M P S O N C E N T E R A S S O C I A T I O N . O R G

REV.01-2019

facebook/tcarmsco instagram/tcarmscotwitter/tcarmsco youtube/tcarmsco

©2019 Smith & Wesson Corp. All Rights Reserved


Documents

ACCESSORIES ENCORE SOFT-SIDED GUN CASE...TC_Catalog_Accessory_Section-2019.indd 61 12/22/18 11:18 AM CLEANING & MAINTENANCE T/C ® PRO HUNTER TOOL This tool can be used to remove and