Accessories Cat

Over 30 years of quality and service

Bushmaster CatalogR E C E I V E R S / B A R R E L S / PA R T S & A C C E SS O R I E S

2 Orders 24 Hrs: 1.800.998.7928

Lower Receivers

A Rock-solid, Reliable Base: Bushmaster Modular Lower Receiver.• Receivers and components some of the most

reliable on the market• Modular design makes part replacement/

maintenance simple• Available as complete assemblies or as stripped

housings, with or without buttstocks

Lower Receiver Assembly with Pistol Grip (A LOW W/O STK) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $285.00Available for 6.8mm SPC Caliber . . . . . . . . . . . . . . . . . . . . . . . . .(A LOW W/O STK-68) . . . . . . . . . . . . . . . . . . . . . . . . . . . . $285.00 MSRP

Six Position “Telestock” and Pistol Grip Lower Receivers.• Complete lower unit with all Bushmaster

components, ready to snap onto your upper receiver• FFL is required for purchase, or order through

your FFL dealer

* Note: Assemblies with Telestocks may still be illegal in some states. Check your state and Country Statutes to determine legality. Also avail-able - Lower Assembly with ATF approved fixed length Tele-Style stock.

Lower w/Telestock . . . . . . . . . . . . . . . . . . .(A LOW TELEP) $370.00Available for 6.8mm SPC Caliber . . . . . (A LOW TELEP-68) $370.00Lower w/Fixed Telestock . . . . . . . . . . . . . .(A LOW PERMX) $370.00

MSRP

“Stripped” Lower Receivers. • Build a Bushmaster rifle from the ground up with

our stripped lower receiver housings• Machined from highest quality aircraft aluminum

forgings• Requires a Bushmaster complete lower receiver parts

kit and your choice of buttstock• Bushmaster offers a complete rifle build-up video,

or you may also referencethe U.S. Government M16A2 technical manual

Stripped Lower for 5.56mm . . . . . . . . . . . . . (9349102-S) $200.00Stripped Lower for 6.8mm . . . . . . . . . . . .(9349102-S-68) $200.00

MSRP

Carbon 15 “Stripped” Lower Receivers.• Molded of carbon fiber, these units are Lightweight,

durable and cooler• They are solid color throughout – no finish to

wear through• These are the same receivers we use on our

“Flat-Top” carbine and others• Standard “AR” parts (like our lower receiver parts kit)

are ready to drop right in

C15 M4 Type Receiver . . . . . . . . . . . . . . . . . . . (AZ15780) $200.00C15 R21/97/97S Receiver . . . . . . . . . . . . . . . . (AZ15180) $200.00C15 P21/97 Pistol Receiver . . . . . . . . . . . . . . . (AZ15179) $200.00

MSRP

or 6.8mm SPC Caliber . . . . . . . . . . . . . . . . . . .rO $

tr

STK-68)TT . . . . . . . .... . ... . . . . . . . . . . . .. .. ... . . . . $

ion “Telestock” and ip Lower Receivers.

Lower w/Fixed Telestock. . . . . . . . . . . . . .kk (A(( LOW PERMX) PP $3

Lower ReceiversL R i

Lower Receivers . . . . . . . . . . . . . . . . . . . 2

Upper Receivers . . . . . . . . . . . . . . . . . . . 3

Lower Receiver Parts & Kits . . . . . . . . 4-7

Upper Receiver / Barrel Assemblies . 8-10

Upper Receiver Parts . . . . . . . . . . . 10-11

Barrels / Barrel Assemblies . . . . . . 12-15

Barrel Parts/Compensators/Supressors/

Muzzle Brakes . . . . . . . . . . . . . . . . 16-18

Magazine Accessories . . . . . . . . . . 19-22

Slings & Bipods . . . . . . . . . . . . . . . 23-25

Pistol Grips & Buttstocks . . . . . . . . 26-31

Handguards & Accessories . . . . 32-35,38

Parts Reference Schematic . . . . . . 36-37

Gunsmithing Accessories . . . . . . . . 39-44

Competition Rifle Parts . . . . . . . . . . 45-48

Sights/Scopes/Mounts . . . . . . . . . . 49-61

Accessories . . . . . . . . . . . . . . . . . . 62-64

Apparel . . . . . . . . . . . . . . . . . . . . . . 64-68

Order Form/Exchanges/Warranty, etc . . 69

2009 BUSHMASTER FIREARMS ACCESSORIES

Trapdoor and Skeleton Stock Lower Receivers.• Available in solid A2 buttstock with trapdoor storage

compartment or sleek, lightweight skeleton stock• Skeleton stock features a rubber buttpad, neoprene foam

sleeve over extension tube and multiple mounting points for the Q.D. sling swivel (included)

*Note: FFL required for purchase of any Lower Receiver.

5.56mm/.223 Caliber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (A LOW STD) $345.00Available for 6.8mm SPC Caliber . . . . . . . . . . . . . . . . . . . . (A LOW STD-68) $345.00Lower w/Ace Skeleton Stock . . . . . . . . . . . . . . . . . . . . . (A LOW SKELETON) $425.00

NOTE: All lower receivers are available in 450 Bushmaster.

3www.bushmaster.com

Upper Receivers

Complete A2 Upper Receiver.• Forged of 707 aircraft aluminum, units are machined

to meet or exceed mil. Spec• Hard anodized to a dark grey non-reflective finish• Includes an Integral brass deflector and a baked-on

dry film lube coating inside for long wear and smooth carrier operation

• Charging handle not included

Complete A2 Upper Receiver . . . . . . . . . . . . . .(A2UR-M2) $195.00

Bushmaster A2 Stripped Upper Receiver.• Fully machined, hard anodize finished forging is dry-

lubed and ready to assemble• Ready to assemble with top Bushmaster quality parts• Requires a rear sight; forward assist assembly and

ejection port cover assembly for completion

Bushmaster A2 Stripped Upper Receiver . . (9349063-M2) $125.00

Bushmaster A1 Upper Receivers.• This version includes an elevation adjustment• Forward assist assembly available in either “tear-drop”

type button or round type• Aircraft quality aluminum forgings are used for

superior strength, and they include integral cartridge case deflector

• Finish is a mil. spec., non-reflective hard anodized with a baked on dry film lube coating inside to ensure long wear and smooth carrier operation

Complete A1 Upper Receiver Assembly . . . . . .(A1UR-M2) $160.00Stripped A1 Upper Receiver Assembly. . . . (8448524-M2) $125.00

V Match (Flat Top) Upper Receiver.• The A3 “Flat-Top” with its Picatinny rail allows virtually

unlimited mounting of scopes, sights and optics• Carefully machined from 7075T6 aircraft aluminum

forgings and is complete as shown with ejection port cover and forward assist

V Match (Flat Top) Upper Receiver . . . . . . . . . .(VUR-M2) $190.00

Stripped V Match (Flat Top) Upper Receiver• Fully machined and hard anodize finished aircraft quality

aluminum forging ready for assembly• Requires ejection port cover assembly and forward

assist assembly for completion

Stripped V Match (Flat Top) Upper Receiver (8448524-V-M2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$155.00

Carbon 15 Molded Upper Receivers.• Tough yet lightweight these upper receivers are molded

of carbon fiber composite originally developed for the Aerospace Industry.

• Impervious to corrosion, they are solid color throughout – no surface finish to wear off

• Use these receivers to build the lightest AR type rifle around. No ejection port covers or forward assist assemblies required

Carbon 15 Flat-Top Upper Receiver . . . . . . . . . (AZ15747) $155.00Carbon 15 Flat-Top Upper Receiver w/Forward Assist & Dust Cover . . . . . . . (AZ15747FADC) $190.00Carbon 15 Pistol Upper Receiver . . . . . . . . . . . (AZ15067) $139.95

8448524-V-M2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$155.0

4 Orders 24 Hrs: 1.800.998.7928

Lower Receiver Parts & Kits

Complete Lower Receiver Parts Kit• Everything necessary to completely build up your

Lower Receiver• Kits available with either AR15 or M16* components.

(Lower Receiver and Auto Sear are not included)

AR15 Lower Parts Kit . . . . . . . . . . . . . . . . . . . (ALOW KIT) $69.50M16 Lower Parts Kit . . . . . . . . . . . . . . . . . . . . (MLOW KIT) $69.50

*NOTE: M16 parts require FFL or MG Tax Stamp. M16 Parts are NOT Legal for Sale in California.

DCM Competition Complete Lower Receiver Parts Kit• Parts shown above plus our Adjustable Two Stage

Competition Trigger

AR15 Lower Parts Kit . . . . . . . . . . . . . . (ALOWKITCOMP) $170.95

Bushmaster Competition Trigger• Finely honed competition trigger – ready for installation

in your Lower Receiver• Can be set for a 3 1/2 lb. DCM legal 1st Stage, and a

1 lb. (2nd Stage) letoff

Competition Trigger . . . . . . . . . . . . . . .(8448592-SCGK) $127.95Two Stage Competition Trigger with Ambidextrous Safety . . . . . . . . . . . . . (8448592-SCGKA) $148.95

*NOTE: This Trigger will not fit in Colt Lowers with Block over Safety. Won't work with Large Colt Pivot Pins.

Field Repair Kit• High breakage and loss items in a heavy zip-lock bag

AR-15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (A FIELD) $31.95M-16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (M FIELD) $31.95*NOTE: M16 Parts are NOT Legal for Sale in California.

Bushmaster BA50 Field Repair Kit• All necessary parts for emergency field repairs on the new

Bushmaster BA50 .50 BMG Caliber Rifle and Carbine

Bushmaster BA50 Field Repair Kit . . . . . . . . (BMG FIELD) $74.95

XM15/AR15/M16 Emergency Survival Kit• Survival Kit is packed in a belt mountable

Olive Drab Carrying Case

Specify with part numbers below: A1 Type (Round Front Sight Post) or A2 Type (Square Front Sight Post) and AR15 (AR) or M16 (M) parts

Survival Kit w/A1 Sight Tool AR-15(AR EMERG A1) M-16(M EMERG A1) . . . . . . . . . . . . $63.95Survival Kit w/A2 Sight Tool AR-15(AR EMERG A2) M-16(M EMERG A2) . . . . . . . . . . . . $63.95

Note: M16 parts require an FFL or Form 4 for purchase.

Complete AR15/M16 Pin & Detent Package• Includes every pin and detent in the gun

Complete AR15/M16 Pin & Detent Package . .(AR PIN PKG) $7.50

“Lost” Parts Kit for AR15 Type Rifle• Contains all the most critical springs, detents, inserts and

pins – will get your gun back to full function in short order

Competition Trigger . . . . . . . . . . . . . . . . . . . . . . . (CP-KIT) $13.50

M16 Parts are NOT Legal for Sale in California.

5www.bushmaster.comco

Bushmaster Receiver Spring Package(SM SPRING PACK) $2.95

• Top quality Bushmaster Spring Kit

Complete Spring Package• Every spring in the gun,

including the Buffer Spring

Telestock Carbine (A COMP SPR PKG-C) $10.50

Standard A2 Solid Stock (A COMP SPR PKG) $10.50

AR15 or M16* Ambidextrous Safety Selector• Installs easily into your lower receiver• For the M16 part, an FFL, or a copy of your Form 4

is required for sale

AR15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (MMT-0007K) $36.95M16* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (MMT-0006K) $36.95*M16 Parts are NOT Legal in California.

Quick-Pull Takedown Pin for Carbon 15 Top Loading Carbine• Makes opening the Receivers of the

Top Loading Carbine easier and faster

Quick-Pull Takedown Pin (AZC-15120) $3.95

Ambidextrous Magazine Release• Release magazines from either

side of the receiver• Uses stock button and spring• Made in U.S.A.

Ambidextrous Magazine Release (8448638-ambi) . . . . . . . . . . . . . . . . . . . . . . . . . $95.95

Ambidextrous Safety Selector for Carbon 15 Rifles• For Type 21 or 97 Rifles and Pistols• Machined of aircraft quality aluminum• Right side operating lever molded

of Carbon 15 composite

Ambidextrous Safety Selector for Carbon 15 Rifles . . . . . . . . . . . . . . . . . . . . . . . (AZ724) $33.50Right Side Operating Lever Only . . . . . . . . . . . . . (AZ724) $11.95

AR15/M16 Accu-Wedge• Accu-Wedge eliminates play between Upper and

Lower Receivers for a more solid feel • Easily installed, no modifications required• Buffers the cycling system to reduce wear on the

impacting surfaces

Accu-Wedge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (ACU1B) $6.50

Complete AR15 Spare Parts Kit• One “super-kit” that will

take care of all your AR15 rifle’s spare parts needs

Complete AR15 Spare Parts Kit w/Rifle Buffer Spring (ARPARTSKIT) $39.50

Complete AR15 Spare Parts Kit w/Carbine Buffer Spring (ARPARTSKIT-C) $39.50Note: If you have our Fixed Length Tele-Stock, please choose the Rifle Buffer Spring Package.

MagPul Enhanced Aluminum Trigger Guard for AR15/M16• Drop-in oversized trigger guard that replaces the

standard plastic or metal type• Made in U.S.A. / Instructions included

MagPul Enhanced Aluminum Trigger Guard for AR15/M16 (MAG015) $19.95

6 Orders 24 Hrs: 1.800.998.7928

AR15 or M16* “Re-hab” Kit• Hammer, Trigger, Safety Selector and Disconnector • M16 Kit must be used in a Title II Receiver for legality –

an FFL or Tax Stamp is required for sale

For Semi-Auto AR15 . . . . . . . . . . . . . . . . . . . . . . (A REHAB) $35.95For Full-Auto M16 . . . . . . . . . . . . . . . . . . . . . . . (M REHAB) $35.95

*Note: M16 Parts are NOT Legal for Sale in California.

Individual Lower Receiver Parts for Late Model COLT AR15s• These are the hard to find parts for the late model Colts

requiring the larger .172" diameter Hammer and Trigger Pins

Hammer . . . . . . . . . . . . . . . . . . . . . . . . . . . . (8448612-SCK) $23.50Trigger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (8448592-SC) $21.50Disconnector . . . . . . . . . . . . . . . . . . . . . . . . . . (8448635-SC) $7.50Hammer or Trigger Pin . . . . . . . . . . . . . . . . . . . (8448609 C) $3.50All 5 Parts in a Kit . . . . . . . . . . . . . . . . . . . . . .(AR COLT KIT) $53.95

M16* Full Auto Sear• Includes Pivot Pin, Bushing and Spring• Note: An FFL or Tax Stamp is required for purchase

M16 Full Auto Sear . . . . . . . . . . . . . . . . . . . . . . . (8448595) $31.95

*Note: M16 Parts are NOT Legal for Sale in California.

M16*A2 Three Shot Burst Set• Installation of this set in your M16A1 machine gun will

give you a Three Shot Burst capability as in the M16A2. • An FFL is required for sale, or a copy of your Form

4. Not legal for installation in anything but a licensed machine gun.

M16 A2 Three Shot Burst Set . . . . . . . . (3SHOT BURST KIT) $63.95

*M16 Parts are NOT Legal for Sale in California.

Lower Receiver Parts & Kits

AR-AR Push Pin• Replaces the big two-screw bolt in the front pivot hole on

Colt receivers (will only fit Colt Sporters)• Converts receiver to standard takedown operation –

as on the military version

AR-AR Push Pin . . . . . . . . . . . . . . . . . . . . . . . . . . . (OAK-01) $10.95

Offset Pin• Adapts a Colt Lower Receiver (with large hole) to M16

Forward Assist type Upper Receiver with smaller hole

Offset Pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (NES-06) $6.50

Expandable Tensioning Pin For All AR15 Type Rifles• Designed to cure a loose fit between older upper

and lower receivers

Expandable Tensioning Pins . . . . . . . . . . . . . . . . . . . (ARTP) $36.95

Anti-Walk Pins for XM15, AR15 and M16• Designed to prevent trigger or sear pin walkout under

rapid fire conditions

Set of Two Pins with Circlips . . . . . . . . . . . . . . . . .(WE-002) $6.50

7www.bushmaster.com

A STATEMENT FROM BUSHMASTER REGARDING MACHINEGUN PARTSThe position of the Bureau of Alcohol, Tobacco and Firearms (ATF) is that if your AR15 type rifle contains even one M16 com-

ponent, it is a Machine Gun. If you own an AR15 from any manufacturer, check to make sure there are no M16 components

in its assemblies. If there are, remove them immediately. Machine them to AR configuration, or replace them and destroy the

M16 components. Refer to the illustrations below to determine if you have M16 components in your assemblies. If you have

any questions about your parts, give us a call and we’ll be glad to supply you with the legally acceptable parts.

Sales of M16 components by Bushmaster Firearms International, LLC will only be made to the following categories of customers: (1) Class 3 (NFA) Dealer, (2) Individual who has a registered NFA weapon, (3) Federal Firearms Licensee with a customer who has a registered NFA weapon.

Individual Parts for Lower ReceiversBolt Catch Assembly . . . . . . . . . . . . . . .(A BCAT ASS) $6.50Bolt Catch . . . . . . . . . . . . . . . . . . . . . . . . . (8448628) $5.50Bolt Catch Spring . . . . . . . . . . . . . . . . . . . . . (8448633) .55Bolt Catch Plunger . . . . . . . . . . . . . . . . . . . . (8448634) .55Bolt Catch Pin . . . . . . . . . . . . . . . . . . . .(MS16562-119) .55Buffer Detent . . . . . . . . . . . . . . . . . . . . . . . (8448582) $1.60Buffer Detent Spring . . . . . . . . . . . . . . . . . . . (8448583) .55AR15 Disconnector . . . . . . . . . . . . . . . . (9349114-S) $5.95M16 Disconnector* . . . . . . . . . . . . . . . . . . (8448635) $5.95Disconnector Spring . . . . . . . . . . . . . . . . . . . (8448594) .55AR15 Hammer w. J pin . . . . . . . . . . . (8448612-SK) $14.95M16 Hammer w. J pin* . . . . . . . . . . . . (8448612-K) $14.95Hammer Pin (8448609), Trigger Pin (8448609), orSear Pin* (8448599) each . . . . . . . . . . . . . . . . . . . $1.00Hammer Spring . . . . . . . . . . . . . . . . . . . . . (8448611) $1.00Magazine Catch Assembly . . . . . . . . . . . (A MC ASS) $4.95Magazine Catch . . . . . . . . . . . . . . . . . . . . (8448638) $3.50Magazine Catch Button . . . . . . . . . . . . . . . (8448636) $1.50Magazine Catch Spring . . . . . . . . . . . . . . . . . (8448637) .55Pistol Grip A2 . . . . . . . . . . . . . . . . . . . . . (9349127) $12.95Pistol Grip Screw . . . . . . . . . . . . . . . . (AN501D416-18) .65Pistol Grip Screw Washer . . . . . . . . . . . . (MS35335-61) .45Pivot Pin (Front) . . . . . . . . . . . . . . . . . . . . (8448621) $4.20Pivot Pin Detent. . . . . . . . . . . . . . . . . . . . . . . (8448585) .55

Pivot Pin Spring . . . . . . . . . . . . . . . . . . . . . . (8448586) .55AR15 Safety Selector . . . . . . . . . . . . . (9381367-S) $10.95M16 Safety Selector* . . . . . . . . . . . . . . . (9381367) $10.95Safety Detent . . . . . . . . . . . . . . . . . . . . . . (8448631) $1.00Safety Detent Spring . . . . . . . . . . . . . . . . . . . (8448516) .85Take Down Pin (Rear) . . . . . . . . . . . . . . . . (8448584) $4.20Take Down Pin Detent . . . . . . . . . . . . . . . . . . (8448585) .55Take Down Pin Spring . . . . . . . . . . . . . . . . . . (8448586) .55Trigger for M16* . . . . . . . . . . . . . . . . . . . (8448592) $11.95Trigger for AR15 . . . . . . . . . . . . . . . . . (8448592-S) $11.95Trigger w. Spring for AR15 . . . . . . . . . (9349115-S) $12.95Trigger Spring . . . . . . . . . . . . . . . . . . . . . . (8448593) $1.00Trigger Guard Assembly . . . . . . . . . . . . . . (8448587) $5.50Trigger Guard Roll Pin . . . . . . . . . . . . . . (MS16562-35) .55Buffer - Standard . . . . . . . . . . . . . . . . . . (8448615) $15.95Buffer Spring - Standard . . . . . . . . . . . . . . (8448629) $5.95Receiver Extension - Std. A2. . . . . . . . . . (8448581) $21.95Buffer - Telestock . . . . . . . . . . . . .(1005-914-4578) $16.95Buffer - Telestock - heavy weight for M16M4machine gun) . . . . . . . . . . . . . (8448730-M) $26.50Buffer Spring - Telestock . . . . . . . .(1005-914-4564) $5.50CAR Receiver Extension - for the newer style 6 Position Telestocks . . . . . . . . (1005-914-2929-6) $26.50CAR Receiver Extension - for older style 4 Position Telestocks . . . . . . . . (1005-914-2929-P) $26.50

Note the differences* between the corresponding parts in each drawing.

AR15 PARTS

Hammer with J pin 8558612-SK

Safety Selector Lever 9381367-SNote “closed” area

Trigger 8448592-S

Bolt Carrier 8448507-S

Disconnector 9349114-S

M16 PARTS

Hammer with J pin 8558612-K

Safety Selector Lever 9381367

Note “closed” areaTrigger 8448592

Bolt Carrier 8448507

Disconnector 8448635

8 Orders 24 Hrs: 1.800.998.7928

.450 Caliber Upper Assembly• Add the hard-hitting punch of the 450 Bushmaster

to your Bushmaster lower receiver instantly• AR-type gas operating system drastically reduces

recoil for excellent second shot control • Aluminum forearm free-floats the barrel for

optimum accuracy• Heavy barrel is hard-chrome lined in bore and chamber

for exceptional durability, and features 1 in 24" twist rifling, optimized for the .450 bullet

• Includes 5-round .450 specific magazine

Bushmaster .450 – 20" Bbl Rifle Upper Assembly . . . . . . . . . . . . . . .(BURVMB 20-45) $795.00Bushmaster .450 – 16" Bbl Carbine Upper Assembly . . . . . . . . . . . .(BURVMB 16-45) $785.00

6.8mm SPC Caliber Upper Assembly• 6.8mm SPC (Special Purpose Cartridge) was

specifically developed for military applications and is now available commercially

• Velocity averages 2600 FPS with 115-gr. Bullets• The 6.8mm SPC was specially adapted to fit the

AR15-type magazine• 16" M4-profile barrel is fitted with “Izzy” muzzle brake • 26-round magazine included

Bushmaster 6.8mm SPC – 16" Bbl A3 Rifle Upper Assembly . . . . . . . . .(BURA3B 16M468) $785.00Bushmaster 6.8mm SPC – 16" Bbl A2 Rifle Upper Assembly . . . . . . . . .(BURA2B 16M468) $685.00

7.62x39mm Caliber Upper Assembly• Same features as the 6.8mm SPC (below left)

Bushmaster 7.62x39mm – 16" Bbl A3 Rifle Upper Assembly . . . . . . . . .(BURA3B 16M439) $785.00Bushmaster 7.62x39mm – 16" Bbl A2 Rifle Upper Assembly . . . . . . . . .(BURA2B 16M439) $685.00

Upper Receiver / Barrel Assemblies

• Infinite configuration possibilities – the versatile Bushmaster modular AR platform

• Barreled upper receivers can be used on existing AR rifle or carbine lower units

• All receivers feature integral brass deflectors and hard anodized finish

• Each assembly is factory headspaced, test-fired and ready to use

• Bushmaster chrome-moly vanadium steel barrels feature hard chrome lining in both bore and chamber for extended barrel life

• Optional stainless steel barrels offer exceptional durability and weather resistance

PRECISION-CRAFTED, MODULAR DESIGN. Bushmaster upper receiver/barrel assemblies.

Stainless Varmint Special .223 Cal. Upper Assembly• Vented free-floating fore-end and scope risers on a

flat-top upper with milled gas block• Stainless steel, heavy, non-chrome-lined 24" barrel

with 1 in 9" twist

Stainless Steel Varmint Special . . . . (PURVMB 24-9SS) $785.00

• Stainless steel, heavy, non-chrome-lined 24" barrel with 1 in 9" twist

Varmint Special Upper without Bolt, Carrier Assembly and Charging Handle . . . . . . . . . . . . . . (PURVM 24-9SS) $635.00

5.56mm/.223 Caliber Gas Piston Upper Assembly• Bushmaster Gas Piston system offers improved

reliability and control to the already dependable AR-type rifle platform

• Eliminates carbon buildup, gas leaks and heat within the upper receiver

• Requires less gas pressure to operate – functions with a wider range of ammunition with reduced recoil

• Includes A3 handle on flat-top upper, or solid handle on A2 version

• B.M.A.S. flip-up front sight and birdcage suppressor on both

Bushmaster 5.56mm/.223 Caliber A3 Gas Piston Upper Assembly . . . . . (BURA3B 16M4-GP) $1130.00Bushmaster 5.56mm/.223 Caliber A2 Gas Piston Upper Assembly . . . . . (BURA2B 16M4-GP) $1030.00

Varminter/Predator .223 Cal. Upper Assembly• Vented free-floating fore-end and scope risers

on a flat-top upper• 11̊ competition muzzle crown and milled gas block• Fluted, extra heavy, non-chrome-lined 20" barrel

with 1 in 8" twist

Bushmaster Predator Upper Assembly . . . . (PURVMB 20FPRED8) $775.00

• Fluted, extra heavy, non-chrome-lined 24" barrel with 1 in 9" twist

Bushmaster Varminter Upper Assembly . . . . . (PURVMB 24FVAR9) $785.00

9www.bushmaster.com

Bushmaster Carbon 15 .223 Caliber Upper Assembly• Upper and lower receivers are constructed of Carbon

15 composite material for ultra-light weight, low maintenance and cool, reliable operation

Carbon 15 Flat-Top Upper Receiver . . . . . . . (AZ15676) $605.00Same Flat-Top Upper Assembly Less Bolt, Carrier and Charging Handle. . . . . . . . . . . . . (AZ15722) $455.00Carbon 15 “Model 4” Upper Receiver/ Barrel Assembly . . . . . . . . . . . . . . . . . . . . . . (AZ15748) $625.00Same Carbon 15 “Model 4” Upper Assembly Less Bolt, Carrier and Charging Handle . . . . (AZ15746) $475.00

16" M4 Patrolman’s Carbine Upper Assembly• Similar to our M4-type carbines, but with additional

barrel length (16") to make them legal for sale to individual officers

• Forged, lightweight 7075T6 aircraft-quality aluminum receivers incorporate all M16A2 design improvements including cartridge case deflector, bolt catch assembly and raised ribs for protection against accidental magazine release

• Available in both A3 and A2 versions, with or without bolt, carrier, and charging handle

16" A3 Patrolman’s Carbine Upper Assembly . . . . . . . . . . . . . . . . . . (BURA3B 16M4) $695.00Same A3 Assembly Less Bolt, Carrier and Charging Handle. . . . . . . . . (BURA3 16M4) $545.0016" A2 Patrolman’s Carbine Upper Assembly . . . . . . . . . . . . . . . . . . (BURA2B 16M4) $595.00Same A2 Assembly Less Bolt, Carrier and Charging Handle. . . . . . . . . (BURA2 16M4) $445.00

Bushmaster 14" Upper Assembly with “AK” Muzzle BrakeA3-AK Carbine Upper Assembly . . . . . .(BURA3B 14.5AK) $705.00Same A3-AK Assembly Less Bolt, Carrier and Charging Handle . . . . . . . . . (BURA3 14.5AK) $555.00A2-AK Carbine Upper Assembly . . . . . .(BURA2B 14.5AK) $605.00Same A2-AK Assembly Less Bolt, Carrier and Charging Handle . . . . . . . . . (BURA2 14.5AK) $455.00

Bushmaster 16" Dissipator Carbine Upper Assembly• Gas block located behind the front sight base and under

the full-length handguards to guard against heat build up

A3 Dissipator Carbine Upper Assembly . . (BURA3B 16D) $705.00Same A3 Assembly Less Bolt, Carrier and Charging Handle . . . . . . . . . . . . . . . . . (BURA3 16D) $555.00A2 Dissipator Carbine Upper Assembly . . (BURA2B 16D) $605.00Same A2 Assembly Less Bolt, Carrier and Charging Handle . . . . . . . . . . . . . . . . . (BURA2 16D) $455.00

Bushmaster 20"/24" National Match Target Upper Assembly20" A3 w/A3 Carry Handle . . . . . . . . . . . . . (BURA3B 20) $665.00Same Assembly Less Bolt, Carrier and Charging Handle. . . . . . . . . . . . (BURA3 20) $515.0020" A2 Solid Carry Handle . . . . . . . . . . . . . (BURA2B 20) $565.00Same Assembly Less Bolt, Carrier and Charging Handle. . . . . . . . . . . . (BURA2 20) $415.0024" A3 w/A3 Carry Handle . . . . . . . . . . . . . (BURA3B 24) $675.00Same Assembly Less Bolt, Carrier and Charging Handle. . . . . . . . . . . . (BURA3 24) $525.0024" A2 Solid Carry Handle . . . . . . . . . . . . . (BURA2B 24) $575.00Same Assembly Less Bolt, Carrier and Charging Handle. . . . . . . . . . . . (BURA2 24) $425.0020" A3 Stainless w/A3 Handle . . . . . . . . (BURA3B 20SS) $715.00Same Assembly Less Bolt, Carrier and Charging Handle. . . . . . . . . . (BURA3 20SS) $565.0020" A2 Stainless Solid Carry Handle . . . (BURA2B 20SS) $615.00Same Assembly Less Bolt, Carrier and Charging Handle. . . . . . . . . . (BURA2 20SS) $465.00

16" Heavy Carbine Upper Assembly• 16” barrel carbines offer compact size, balanced

swing weight, and great accuracy called for in many tactical situations

• Standard issue for many law enforcement and military units

• Available in both A3 and A2 versions, with or without bolt, carrier, and charging handle

16” Heavy A3 Carbine Upper Assembly . . . (BURA3B 16) $685.00Same Heavy A3 Assembly Less Bolt, Carrier and Charging Handle . . . . . . . . . . . . (BURA3 16) $535.0016” Heavy A2 Carbine Upper Assembly . . . (BURA2B 16) $585.00Same Heavy A2 Assembly Less Bolt, Carrier and Charging Handle . . . . . . . . . . . . (BURA2 16) $435.00

Bushmaster 14.5" M4 Upper AssemblyM4A3 .223 Caliber Upper Assembly . . . . . . . . . . . . . . . . . . . . (BURA3B 14.5M4 IZ) $725.00Same Assembly Less Bolt, Carrier and Charging Handle. . . . . . (BURA3 14.5M4 IZ) $570.00M4A2 .223 Caliber Upper Assembly . . . . . . . . . . . . . . . (BURA2B 14.5M4 IZ) $625.00Same Assembly Less Bolt, Carrier and Charging Handle. . . . . . (BURA2 14.5M4 IZ) $475.00

Modular Carbine Upper Assembly• Fluted, chrome-lined, chrome moly steel 16" barrel

with 1 in 9" twist• Milled gas block, flip-up sights, 4-rail fore-end

with rail covers• Bipod/sling stud, flat-top upper receiver with bolt

carrier, charging handle and forward assist

Complete Upper Receiver . . . . . . . . . (BURVMB 16FMC) $990.00Without Bayonet Lug or suppressor . (PURVMB 16FMC) $990.00

ushmaster 20"/24" National Match Target

10 Orders 24 Hrs: 1.800.998.7928

Bushmaster 16" Superlight Upper Assembly Superlight A3 Carbine Upper Assembly . (BURA3B 16SL) $695.00Same Assembly Less Bolt, Carrier and Charging Handle . . . . . . . . . . . . . . . . (BURA3 16SL) $545.00Superlight A2 Carbine Upper Assembly . (BURA2B 16SL) $595.00Same Assembly Less Bolt, Carrier and Charging Handle . . . . . . . . . . . . . . . . (BURA2 16SL) $445.00

Bushmaster “V Match” 16"/20"/24" Upper Assembly16” V Match Carbine Upper Assembly . . . . (BURVMB 16) $625.00Same Assembly Less Bolt, Carrier and Charging Handle . . . . . . . . . . . . . . . . . . (BURVM 16) $475.0020” V Match Rifle Upper Assembly . . . . . (BURVM20AH) $625.00Same Assembly Less Bolt, Carrier and Charging Handle . . . . . . . . . . . . . . . .(BURVM 20AH) $475.0024” V Match Rifle Upper Assembly . . . . . (BURVM24AH) $635.00 Same Assembly Less Bolt, Carrier and Charging Handle . . . . . . . . . . . . . . . .(BURVM 24AH) $485.00

Bushmaster 11.5" Barrel Upper Assembly with 5.5" Flash SuppressorA3 Carbine Assembly with 5.5" Flash Suppressor . . . . . . . . . . . . .(BURA3B 11.5/5.5) $695.00Same A3 Assembly Less Bolt, Carrier and Charging Handle . . . . . . . . (BURA3 11.5/5.5) $545.00A2 Carbine Assembly with 5.5" Suppressor . . . . . . . . . . . . .(BURA2B 11.5/5.5) $595.00Same A2 Assembly Less Bolt, Carrier and Charging Handle . . . . . . . . (BURA2 11.5/5.5) $445.00

Upper Receiver/Barrel Assemblies for Law Enforcement OnlyDue to BATF regulations restricting barrel length, the Upper Receiver/Barrel Assemblies below are legal for installation only on weapons registered as Short

Barreled Rifles or Pistols, and cannot be sold to the general public without proper paperwork and per-mitting. For any questions regarding these Uppers, please consult our LE Sales Professionals.

Bushmaster 11.5" Barrel Upper AssemblyA3 Carbine Upper Assembly . . . . . . . . . . . (BURA3B 11.5) $685.00Same A3 Assembly Less Bolt, Carrier and Charging Handle . . . . . . . . . . . (BURA3 11.5) $535.00A2 Carbine Upper Assembly . . . . . . . . . . . (BURA2B 11.5) $585.00Same A2 Assembly Less Bolt, Carrier and Charging Handle . . . . . . . . . . . (BURA2 11.5) $435.00

Bushmaster 14.5" Heavy Barrel Upper AssemblyHeavy A3 Carbine Upper Assembly . . . . . (BURA3B 14.5) $685.00Same A3 Assembly Less Bolt, Carrier and Charging Handle . . . . . . . . . . . (BURA3 14.5) $535.00Heavy A2 Carbine Upper Assembly . . . . . (BURA2B 14.5) $585.00Same A2 Assembly Less Bolt, Carrier and Charging Handle . . . . . . . . . . . (BURA2 14.5) $435.00

Bushmaster 14.5" M4 Barrel Upper AssemblyM4A3 Carbine Upper Assembly . . . . . (BURA3B 14.5M4) $695.00Same M4A3 Assembly Less Bolt, Carrier and Charging Handle . . . . . . . . (BURA3 14.5M4) $545.00M4A2 Carbine Upper Assembly . . . . . (BURA2B 14.5M4) $595.00Same M4A2 Assembly Less Bolt, Carrier and Charging Handle . . . . . . . . (BURA2 14.5M4) $445.00

B h t “V M t h” 16"/20"/24"

Upper Receiver / Barrel Assemblies

Bushmaster Complete Bolt & Bolt Carrier AssemblyAR15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (8448501-S) $137.95M16* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (8448501) $137.95

*NOTE: M16 Parts are NOT Legal for Sale in California.

AR15 or M16 Bolt Carrier Assembly with Key Staked on• Chrome lined for smooth bolt functioning and long life

AR15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (8448505-S) $92.50M16* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (8448505) $92.50

NOTE: M16 Bolt Carriers must be used in Title II Receivers for legality. An FFL or Tax Stamp is required for purchase. *M16 Parts are NOT Legal for Sale in California.

Upper Receiver Parts

11www.bushmaster.com

Upper Receiver Parts

AR15 or M16 Bolt Carrier without Key• Same quality Chrome Lined Carrier,

but without the Carrier Key

AR15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (8448507-S) $78.95M16* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (8448507) $78.95

CAUTION: Bolt Carrier Keys must be “staked” onto the Carrier for safe and proper functioning in your rifle. For information on this procedure, or any AR15 assembly/disassembly work, we recommend the Bush-master Video or the U.S. Government M16 Technical Manual (see Gunsmithing Section).*M16 Parts are NOT Legal for Sale in California.

Complete AR15 Bolt Assembly• Includes Bolt, Extractor Assembly, Pins, Gas Rings,

Ejector Assembly

Complete AR15 Bolt Assembly . . . . . . . . . . . . . . (8448509) $56.00

Bolt Cam Pin• Machined of hardened steel to military specs. or better• Manganese Phosphated for protection against

rust or corrosion

Bolt Cam Pin . . . . . . . . . . . . (8448502) $4.50

Titanium Firing Pin• Titanium is 40% lighter than steel

for faster lock time, and greater accuracy• Patented, precision machined pin improves safety by

reducing the possibility of a “slam fire”

AR15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (13-7015) $42.50

Chrome Steel Firing Pin• A standard, mil. spec. Firing Pin for the AR15 or M16

AR15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (8448503-S) $7.50M16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (8448503) $7.50

on against

50

Bolt Carrier Rebuild Kit• Includes all parts shown to rebuild your Bolt and Carrier

AR15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(A BC REBUILD) $37.95M16* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (M BC REBUILD) $37.95

*NOTE: M16 Parts are NOT Legal for Sale in California. WARNING: Key must be staked onto Carrier

Ejection Port Cover Assembly• Manganese Phosphate finished in matte grey/black

color to match hard anodized uppers

Ejection Port Cover Assembly . . . . . . . . . . . (A EJ COV ASS) $12.95

*NOTE: M16 Parts are NOT Legal for Sale in California.

Charging Handle Assembly• Precision machined from 7075T6 aircraft quality alumi-

num forgings, they are hard anodize finished per U.S. mil. spec. – with spring loaded latch installed

Charging Handle Assembly (8448517) $26.50

Individual Parts for Upper ReceiversBolt Cam Pin . . . . . . . . . . . . . . . . . . . . . . . . . . . (8448502) $4.50Bolt Carrier Key with screws/must be staked . . . . . . . . . . (AR BC KEY/SCREW) $15.95Bolt Gas Rings (set of 3) . . . . . . . . . . . . . . . . . (8448511K) $3.15Ejector Assembly. . . . . . . . . . . . . . . . . . . . . (A EJECT ASS) $3.50Extractor Assembly . . . . . . . . . . . . . . . . . (A EXTRAC ASS) $14.95Extractor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (8448512) $13.95Extractor Pin . . . . . . . . . . . . . . . . . . . . . . . . . . . (8448513) $1.00Extractor Spring . . . . . . . . . . . . . . . . . . . . . . (8448755SP) $1.50Extractor Spring Insert . . . . . . . . . . . . . . . . . . . . (8448754) $.80Firing Pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(8448503-S) $7.50Firing Pin Retaining Pin . . . . . . . . . . . . . . . . . . (8448504) $1.00

Forward Assist Assemblies – “Teardrop” or Round Style• Machined from 4140 ordinance steel • Manganese Phosphate finished

Teardrop Style (9349086-TD KIT) $21.50Round Style . . (9349086 KIT) $21.50

AR15/M16 Charging Handle Tactical Latch• Sturdy steel construction –

improves on the standard charging handle latch and allows easy weapon charging, or left handed operation when using a scope or other optics

AR15/M16 (Tactical Latch) . . . . . . . . . . . . . .(1005-249-02) $21.95

Enidine Hydraulic Buffer – Rate Reducer• Drop-in replacement for standard buffers - with units

designed for either rifles or carbines• Quality alloy steels with a black oxide finish; action rod is

nickel plated for smooth operation• Rear “bumper” is molded black polyurethane

For Carbines (HB-1A) $89.95For Rifles . . .(HB-2A) $99.95

S.latch installed

ssembly

*NOTE Legal

bumper is molded black polyurethane

ines (HBHH -1A)A $89.95s . . .(HBHH -2A22 )A $99.95

e

ing handle harging

12 Orders 24 Hrs: 1.800.998.7928

Bushmaster Barrels are the finest AR15/M16 type barrels made – machined from ChroMoly Vanadium steel. We also offer 20"/24" Heavy Profile Barrels machined from Stainless Steel. Most Bushmaster barrels are hard chrome lined (except the Stainless Steel, Varminter; Predator, DCM and 9mm) to offer corro-sion resistance in the bore and chamber. The chrome lining is much harder than barrel steel, and effectively doubles barrel life with proper care (exactly why the military specifies the process). Chrome’s lubricity (i.e. “slipperiness”) reduces friction, increases velocity, aids in chambering, extraction, and speeds barrel cleaning. Bushmaster barrels are manganese phosphate finished (except the Stainless) to guard against exterior rust or corrosion, and to provide the same matte black, non reflective finish found on quality military type arms.

Rifling. Bushmaster barrels have 6 grooves and lands, right

hand twist, 1 turn in 9" (except for DCM & Predator barrels –

1 in 8"). The 1 in 9" twist offers optimal results for the widest

variety of commercially available .223 / 5.56mm ammunition.

Forged Front Sights. Our standard front sights are machined

from steel forgings to offer superior tensile strength. We do

not use castings, which may crack or break if you accidentally

drop your rifle.

Headspacing. Barrel assemblies are headspaced at the

factory and are shipped ready for assembly and use. Barrel

assemblies can be ordered with either a stepped, crowned

muzzle or a threaded muzzle for attachment of a flash sup-

pressor or muzzle brake. BATF rulings permit permanent fac-

tory installation of muzzle brakes/suppressors on barrels if the

overall length (barrel & brake, etc.) equals at least 16". Ask

your Bushmaster representative about factory installed muzzle

brake / compensator / flash suppressor options available, or

see Muzzle Brakes/Suppressors in this catalog.

Purchase Two Ways. In the listings below, Bushmaster

Barrels can be purchased as “Complete Assemblies” which

include all parts forward of the Upper Receiver: Handguards;

Gas Tube; Delta Ring Kit; etc. as shown here:

Bushmaster Barrels can also be purchased as “Barrel Only”

which includes the barrel; barrel nut; handguard cap and

complete front sight assembly (with sight post and sling

swivel) as a savings to those shooters who already have

handguards. An example in ”Barrel Only” configuration is

shown here:

Note: “Barrel Only” assemblies of 16" or longer length will not

include flash suppressors - order those separately from our

Muzzle Brakes / Suppressors / Compensators Section.

Barrel Fluting Option. Fluting is the process of milling 6

grooves into the barrel’s surface to increase cooling capability

by increasing the barrel’s surface area. Depending upon bar-

rel length, fluting increases surface area by as much as 180%

- and can reduce barrel weight by as much as 20%. Because

of the extensive machining involved, order fulfillment on fluted

barrels can take longer. Ask your sales representative about

availability when ordering fluted barrels. To order a barrel

with fluting, simply ADD $50.00 to the price of the barrel (or

assembly), and add an “F” to the end of the part number. Note: Fluting is not available on some barrels, such as the A2

Gov’t. Profile, the M4 Type Barrel and some Stainless Steel

Barrels. Fluting is included on Varminter and Predator Barrels

(Predator shown below).

“Pre-Ban”/”Post-Ban.” A Caution for our Customers: When the “Assault Weapons Ban of 1994” expired on Sept.

13th, 2004, it became legal to again offer features on the

AR15 type rifle such as flash suppressors and bayonet lugs

that had been deemed illegal for those previous 10 years.

Though that Federal Legislation has expired, certain States

have retained their own versions of “Assault Weapons Ban”

Statutes. Buyers should check their own State and County

laws to determine the local legality of rifles or parts such as

barrels with these features and accessories.

Example of a Bushmaster Barrel with “Pre-Ban” features at

right – Bayonet Lug and Birdcage Flash Suppressor. These

assemblies have part numbers that begin with “A BBL”

Example of a Bushmaster Barrel with “Post-Ban” features at

right. These do not have Bayonet Lug or Flash Suppressor.

These assemblies have part numbers that begin with “P BBL”

Barrels


Barrel Assemblies (223 Rem / 5.56mm Caliber)

14.5" M4 Barrel Assembly with Izzy Compensator• M4 profile Chrome-lined Barrel with pinned and welded

Izzy Compensator – is BATF legal for semi-auto rifles. Total length is just over 16"

With Bayonet Lug . . . . . . . . . . . . . (A BBL-14M4 IZFHA) $270.00Without Bayonet Lug . . . . . . . . . . . . . . (P BBL-14M4IZA) $270.00

14.5" M4 Barrel Only with Izzy CompensatorWith Bayonet Lug . . . . . . . . . . . . . . .(A BBL-14M4 IZFH) $240.00Without Bayonet Lug . . . . . . . . . . . . . . . (P BBL-14M4IZ) $240.00

14.5" M4 Barrel Assembly with AK Muzzle Brake• Features M4 profile 14.5" Chrome Lined Barrel with AK

type Muzzle Brake permanently pinned and welded for BATF legality (16" overall length) on semi-automatics

With Bayonet Lug . . . . . . . . . . . . . . . (A BBL-14M4AKA) $260.00Without Bayonet Lug . . . . . . . . . . . . . (P BBL-14M4AKA) $260.00

14.5" M4 Barrel Only with AK Muzzle Brake• With permanent AK Brake – less Handguards, Gas Tube

and Delta Ring Kit

With Bayonet Lug . . . . . . . . . . . . . . . . (A BBL-14M4AK) $230.00Without Bayonet Lug . . . . . . . . . . . . . . (P BBL-14M4AK) $230.00

14.5" Heavy Barrel Assembly with AK Muzzle Brake• A heavy profile 14.5” Chrome Lined Barrel with AK type

Muzzle Brake permanently pinned and welded. 16" overall length meets BATF regulations for semi-autos

With Bayonet Lug . . . . . . . . . . . . . . . . (A BBL-14.5AKA) $250.00Without Bayonet Lug . . . . . . . . . . . . . . . . (P BBL-14AKA) $250.00

14.5" Heavy Barrel Only with AK Muzzle Brake• With permanent AK Brake – less Handguards, Gas Tube

and Delta Ring Kit

With Bayonet Lug . . . . . . . . . . . . . . . . . (A BBL-14.5AK) $220.00Without Bayonet Lug . . . . . . . . . . . . . . . . . (P BBL-14AK) $220.00

16" M4 “Patrolman’s Carbine” Barrel Assembly• 16" M4 profile Chrome Lined Barrel with A2 Birdcage

Suppressor on Threaded Muzzle – one of our most popular configurations

With Bayonet Lug . . . . . . . . . . . . . . . . . (A BBL-16M4A) $235.00Without Bayonet Lug or Threaded Muzzle . . . . . . . . . . . . . . . . . . (P BBL-16M4A) $235.00

16" M4 “Patrolman’s Carbine” Barrel Only• Less Handguards, Gas Tube, Delta Ring Kit

and Suppressor

With Bayonet Lug . . . . . . . . . . . . . . . . . . (A BBL-16M4) $205.00Without Bayonet Lug or Threaded Muzzle (P BBL-16M4) $205.00

16" Heavy Carbine Barrel Assembly• Heavy profile 16” Chrome Lined Barrel with A2

Birdcage Suppressor on Threaded Muzzle – many other Suppressors & Brake will screw on

With Bayonet Lug . . . . . . . . . . . . . . . . . . . . (A BBL-16A) $225.00Without Bayonet Lug or Threaded Muzzle . . (P BBL-16A) $225.00

16" Heavy Carbine Barrel Only• Less Handguards, Gas Tube, Delta Ring Kit

and Suppressor

With Bayonet Lug . . . . . . . . . . . . . . . . . . . . . (A BBL-16) $195.00Without Bayonet Lug or Threaded Muzzle . . . (P BBL-16) $195.00

16" SuperLight Barrel Assembly• The lightest 16" Chrome Lined Barrel we offer – with

A2 Birdcage Suppressor on Threaded Muzzle. Tapers from .670" to .565" under handguards, .625" under sightbase, and to .570" at the muzzle (similar to the original Vietnam era A1 barrel profile).

With Bayonet Lug . . . . . . . . . . . . . . . . . . (A BBL-16SLA) $235.00Without Bayonet Lug or Threaded Muzzle . . . . . . . . . . . . . . . . . . . (P BBL-16SLA) $235.00

Note: due to diameter at muzzle, no “slip-on/pinned” type muzzle brakes will fit this barrel. Use only 1/2”x 28 T.p.I. threaded accessories.

16" SuperLight Barrel Only• Less Handguards, Gas Tube, Delta Ring Kit

and Suppressor

With Bayonet Lug . . . . . . . . . . . . . . . . . . . (A BBL-16SL) $205.00Without Bayonet Lug or Threaded Muzzle . . . . . . . . . . . . . . . . . . . . (P BBL-16SL) $205.00

16" Dissipator Heavy Barrel Assembly• A 16" Chrome Lined Barrel with carbine position gas

block, and full length, heat shielded Handguards for excellent cooling and the full sight radius designed into the A2 sight system

With Bayonet Lug . . . . . . . . . . . . . . . . . . . . (A BBL-16DA) $245.00Without Bayonet Lug or Threaded Muzzle . (P BBL-16DA) $245.00

16" Dissipator Heavy Barrel Only• Less Handguards, Gas Tube, Delta Ring Kit

and Suppressor

With Bayonet Lug . . . . . . . . . . . . . . . . . . . . . .(A BBL-16D) $215.00Without Bayonet Lug or Threaded Muzzle . . (P BBL-16D) $215.00

14 Orders 24 Hrs: 1.800.998.7928

24" National Match Heavy Barrel Assembly• 24" heavy profile Chrome Lined Barrel

With Bayonet Lug . . . . . . . . . . . . . . . . . . . . (A BBL-24A) $235.00With Plain Muzzle & no Bayonet Lug . . . . . . (P BBL-24A) $235.00

24" National Match Heavy Barrel Only• Less Handguards, Gas Tube, Delta Ring Kit

and Suppressor


20" Stainless Steel Heavy Barrel Assembly• Per request of many High Power Competition

shooters, the accurate 1 in 9" twist Bushmaster Barrel is available in brush finished, non-chrome lined, 416 Stainless Steel

With Bayonet Lug and Birdcage . . . . . . .(A BBL-20SSA) $275.00Plain Muzzle & no Bayonet Lug . . . . . . . .(P BBL-20SSA) $275.00

20" Stainless Steel Heavy Barrel Only• Less Handguards, Gas Tube, Delta Ring Kit

and Suppressor

With Bayonet Lug . . . . . . . . . . . . . . . . . . . (A BBL-20SS) $245.00Without Bayonet Lug or Threaded Muzzle .(P BBL-20SS) $245.00

24" Varminter Barrel Assembly• 24” Fluted, Non-Chrome Lined Barrel based on DCM

Competition design – button rifled 1 x 9". Features a hybrid SAAMI Spec. chamber with longer throat or “Leade” to accommodate 5.56mm ammunition

• It is 1" in diam. out to the gas block with an 11° competition muzzle crown; V Match Sight Base/Gas Block and Varminter Vented Forend with Bipod/Sling Stud, and includes a Bolt

• We recommend assembly onto your Upper Receiver by an experienced AR15 gunsmith to achieve full accuracy – shipped unassembled as shown

24" Varminter Barrel Assembly . . . . . (P BBL-24FVAR9A) $391.95

24" Varminter Barrel Only• Same as above: Barrel, Bolt and V Match Milled Gas

Block – less Varminter Vented Forend and Gas Tube. Shipped unassembled – gunsmithing recommended

24" Varminter Barrel Only . . . . . . . . . . (P BBL-24FVAR9) $313.95

Barrel Assemblies (223 Rem / 5.56mm Caliber)

16" Dissipator M4 Barrel Assembly• As described above but with M4 profile for lighter

weight. Carbine position gas block, heat shielded Rifle Handguards, full sight radius designed of the A2 sight system

With Bayonet Lug . . . . . . . . . . . . . . . . (A BBL-16DM4A) $255.00Without Bayonet Lug or Threaded Muzzle . . . . . . . . . . . . . . . . . (P BBL-16DM4A) $255.00

16" Dissipator M4 Barrel Only• Less Handguards, Gas Tube, Delta Ring Kit and

Suppressor (shown above)

With Bayonet Lug . . . . . . . . . . . . . . . . . (A BBL-16DM4) $225.00Without Bayonet Lug or Threaded Muzzle . . . . . . . . . . . . . . . . . . (P BBL-16DM4) $225.00

20" M16A2 Type Barrel Assembly• A Gov’t. profile Chrome Lined Barrel – light in

weight and reduced in diameter under the handguards – ideal for restoring that older rifle or building a new light-weight

With Bayonet Lug & A2 Birdcage Suppressor . . . . . . . . . . . . . (A BBL-20A2A) $235.00With Plain Muzzle & no Bayonet Lug . . . .(P BBL-20A2A) $235.00

20" M16A2 Type Barrel OnlyWith Bayonet Lug . . . . . . . . . . . . . . . . . . . (A BBL-20A2) $205.00Without Bayonet Lug or Threaded Muzzle . (P BBL-20A2) $205.00

20" National Match Heavy Barrel Assembly• A 20" heavy profile Barrel Chrome Lined in both Bore

and Chamber – with A2 Birdcage Flash Suppressor and all parts forward of the Upper Receiver

With Bayonet Lug . . . . . . . . . . . . . . . . . . . . (A BBL-20A) $225.00With Plain Muzzle & no Bayonet Lug . . . . . . (P BBL-20A) $225.00

20" National Match Heavy Barrel Only• Less Handguards, Gas Tube, Delta Ring Kit

and Suppressor



24" Stainless Varminter Barrel Assembly• A highly accurate 24" Barrel as used in our Stainless

Varmint Special Rifle – brush finished 416 Stainless Steel, in 1 in 9" twist – complete with Vented Aluminum Free-floater Fore-end, Sling Stud, Gas Block, Gas Tube, Bolt and Barrel Extension

• Shipped unassembled – requires gunsmithing

24" Stainless Varminter Barrel Assembly . . . . . . . . . . . . . . . . . . (P BBL-24A-SS) $391.95

24" Stainless Varminter Barrel Only• Includes 24" 1 X 9” Twist Stainless Steel Barrel with

Gas Block, Bolt and Barrel Extension

24" Stainless Varminter Barrel Only . . . . .(P BBL-24SS) $313.95

20" Predator Barrel Assembly• Similar to Varminter but 20” Fluted length and rifled 1

x 8" for the heavier bullets used on Predators – non-chrome lined, with an 11° competition muzzle crown

• V Match Sight Base/Gas Block and Vented Fore-end with Sling Stud – assembly by gunsmith recommended

20" Predator Barrel Assembly . . . . .(P BBL-20FPRED8A) $381.95

20" Predator Barrel Only• Same as above: Barrel, Bolt and V Match Milled Gas

Block – less Vented Free-Float Forend and Gas Tube. Shipped unassembled – gunsmithing recommended

20" Predator Barrel Only . . . . . . . . . .(P BBL-20FPRED8) $303.95

Competition Heavy Barrel with Factory Matched Bolt and Front Sight Base• A non-chrome lined, lapped 20" Barrel, button rifled in

1 x 8” twist, with 11° competition muzzle crown • Custom match hybrid chambered with longer throat

("Leade") to accommodate 5.56mm ammunition (avoids the higher pressures developed when shoot-ing 5.56mm ammo in a .223 caliber chamber with a shorter Leade - both calibers can be safely used)

• Chrome Moly Vanadium Steel with a Manganese Phosphate finish – 1" diam. from the barrel extension forward to the sight base step

No muzzle threading or bayonet lug . (9349054-20CGA) $313.95With std. muzzle threading for flash supressors . . . . . . . . . . . . .(9349054-20CGAPRB) $313.95

Note: Assembly by a Gunsmith recommended for optimum accuracy.

Bushmaster Barrel Assemblies for Law Enforcement ONLYThese Law Enforcement / Military Barrel Assemblies are under the 16" legal minimum for semi-automatic rifles, and per BATF Regulations, can only be installed on weapons registered as full autos or legal short barrelled rifles.

14.5" M4 Type Barrel Assembly• Chrome Lined, 1 x 9” twist Barrel with Birdcage

suppressor – machined for the addition of the M203 grenade launcher with the narrow “government” profile under the handguards for light weight like the original A1 rifle barrel

14.5" M4 Type Barrel Assembly . . . . . . . (A BBL-14M4A) $235.00

14.5" M4 Type Barrel Only• Less Handguards, Gas Tube, Delta Ring Kit and

Birdcage Flash Suppressor

14.5" M4 Barrel Only . . . . . . . . . . . . . . . . (A BBL-14M4) $205.00

Bushmaster “Short Barrelled” Assemblies• These chrome lined barrel assemblies (either 11.5"

or 14.5") with A2 Birdcage Suppressors may only be used on registered short barrelled rifles, or full auto models for legality

11.5" Barrel Assembly . . . . . . . . . . . . . . . (A BBL-11.5A) $225.0011.5" Barrel Only . . . . . . . . . . . . . . . . . . . . (A BBL-11.5) $195.0014.5" Heavy Barrel Assembly . . . . . . . . . (A BBL-14.5A) $225.0014.5" Heavy Barrel Only . . . . . . . . . . . . . . (A BBL-14.5) $195.00

NOTE: with a permanently installed Izzy Compensator, or other 2 3/16” suppressor, the 14.5" Heavy Barrel assembly becomes a legal 16" barrel. Ask your Bushmaster Salesperson for details.

16 Orders 24 Hrs: 1.800.998.7928

A

B

CD

Stainless Steel Replacement Barrels for Carbon 15 Rifles & Pistols• Match Grade 416 Stainless Steel factory replacement

barrels – .223/5.56mm cal. – precision machined, polished and 1 X 9” twist rifled, these barrels require factory installation (special torqueing with a unique barrel wrench – no charge)

Carbon 15 R21 & Bushmaster Lady Rifle Barrel . . . . . . (AZ15367) $159.95

Carbon 15 R97 Rifle Barrel. . . . . . . . . . . . . . . . (AZ15368) $209.95R97S & R97F Barrel . . . . . . . . . . . . . . . . . . . . (AZ15368T) $209.95P21 Pistol Barrel . . . . . . . . . . . . . . . . . . . . . . . . (AZ15313) $139.95P21S Pistol Barrel . . . . . . . . . . . . . . . . . . . . . . (AZ15313T) $139.95P97 Pistol Barrel . . . . . . . . . . . . . . . . . . . . . . . . (AZ15314) $179.95P97S Pistol Barrel . . . . . . . . . . . . . . . . . . . . . . (AZ15314T) $179.95

Gas Tubes• Quality materials and machining, properly bent for a

perfect fit and flawless functioning in your rifle

Rifle length Gas Tube . . . . . . . . . . . . . . . . . . . . . (8448567) $14.95Carbine length Gas Tube . . . . . . . . . . . . . (1005-914-3504) $12.95Gas Tube Roll Pin . . . . . . . . . . . . . . . . . . . . . .(MS16562-106) $.50

Handguard Caps• Manganese Phosphate finished steel Handguard Caps in

three different types for Standard or Heavy profile barrels• NOTE: Rifle Length Handguards take the Triangular Cap /

Standard Carbine• Handguards take the Round Cap / M4 (Oval Profile)

Carbine Handguards take either Round Cap (B. or C.)

A. Triangular Cap (Standard Barrel) . . . . . . . . . . . (SGW-10) $6.50A. Triangular Cap (Heavy Barrel) . . . . . . . . . . . . . (9349053) $6.50B. Round Cap (Standard Barrel) . . . . . . . . . . . . . . (SGW-09) $6.50B. Round Cap (Heavy Barrel) . . . . . . . . . . . . . . . .(SGW-10F) $6.50C. M4 Cap (Notched for M203) . . . . . . . . . . . . (SGW-10F-M) $6.50

NOTE: Diameter of Standard Barrel = .625” Diameter of Heavy Barrel = .750”

Individual Delta Ring PartsA. Aluminum Delta Ring . . . . . . . . . . . . . . . . . . . . (8448712) $7.50B. Handguard Weld Spring . . . . . . . . . . . . . . . . . . (8448555) $5.25C. Handguard Snap Ring . . . . . . . . . . . . . .(MS16626-1137) $2.75D. Gas Tube Roll Pin . . . . . . . . . . . . . . . . . . . .(MS16562-106) $.50Delta Ring Kit (includes all parts below) . . . . . (8448712K) $13.95

Individual Barrel PartsA. Front Sling Swivel . . . . . . . . . . . . . . . . . . . . . (8448571) $3.50B. Front Sling Swivel Rivet . . . . . . . . . . . . . . . . . (8448697) $.80C. Barrel Extension . . . . . . . . . . . . . . . . . . . (9349054BE) $15.95D. Barrel Nut . . . . . . . . . . . . . . . . . . . . . . . . (9349054BN) $12.95

FSC556 Tactical Compensator• Utilizing aggressive scallop-type

porting, the FSC556 Tactical Compensator delivers superior gas dispersion to help stabilize the muzzle during periods of rapid or full auto fire.

• .223 (5.56 NATO) compensator that also combines the functionality of a flash hider.

• It has also been designed to accommodate suppressors such as the Gemtech HALO and therefore comes with a peel washer for installation.

• 2.10" in length, .865" (22mm) in diameter and is threaded 1/2x28 RH.

• This device has been classified as a non-flash suppress-ing device by the BATFE.

Primary Weapons Muzzle Break. . . . . . . . . . . . . . . (10008) $99.95

Bushmaster “Izzy” Flash Suppressor/Compensator• One of a series designed by a Bushmaster employee• Features 3 gas ports, a machine turned ribbed

design, and a closed bottom• Functions as a Flash Suppressor, but also effectively

controls muzzle rise in rapid fire• Machined from quality gun steel – manganese phos-

phate finished

Bushmaster “Izzy” Flash Suppressor/Compensator . . . . . . . . . . . . . . (IZ-102660-FH) $36.95

• For plain muzzle 5.56mm/.223 cal. “Post-Ban” guns. Similar to above but slips over .700" diam. muzzles and is pinned on with a taper pin and high strength Loctite® for extra safety.

Bushmaster “Izzy” Flash Suppressor/Compensator . . . . . . . . . . . . . (IZ-102660-SFH) $36.95

Warning: Requires factory installation, or professional gunsmithing, to drill and install the taper pin

NOTE: Bushmaster DOES NOT sell Front Sight Bases separately due to the difficulties of drilling and retro-fitting them to barrels.

A B C

A

BC

D

Barrel Parts / Compensators / Suppressors / Muzzle Brakes

atore

the or

th t l bi th


Bushmaster “Izzy” Muzzle Brake (5.56mm/.223 cal.)Production approved by the BATF – featuring four gas ports and a ribbed design to improve cooling. Machined of 4140 gun steel with a manganese phosphate finish – very effec-tive in controlling muzzle rise. Slip-on/taper pinned version for barrels with plain crowned muzzles, and threaded mod-el (shown left - threaded 1/2" x 28 T.p.I.) can be installed without regard to port location (timing) and will still be effective, however most are installed with ports positioned 12 - 3 – 6 - 9 o'clock. The slip-on, pinned version requires factory installation or professional gunsmithing to drill and install the taper pin, and for extra safety, high strength Loctite® should be used in addition to the taper pin.

Threaded Izzy Brake (for 1/2" x 28 T.p.I. threaded barrels – requires lock washer) . . . . . . . . . . . . . . . (IZ-102660-PRBF) $36.95Slip-on Izzy Brake (for plain muzzles .700" diameter – requires gunsmithing). . . . . . . . . . . . . . . (IZ-102660-PSTF) $36.95.308 Izzy Brake (for .308 Cal. threaded barrels (5/8" x 24) – requires crush washer) . . . . . . . . . . . . . . . . (IZ-308-PRBFH) $36.95

Phantom Flash SuppressorPrecision CNC machined from quality gun steel – phos-phate coated to military standards – with 5 equally spaced gas slots, it eliminates most of the flash and offers excel-lent performance with night vision equipment. Superior strength to earlier forked type, and it won't hang up on brush or clothing. 2 3/16" Overall - for threaded muzzles only (1/2" x 28 T.p.I.). Requires no specific timing, so only a Lock Washer is needed.

Phantom . . . . . . . . . .(YHM-29) $36.95

Phantom 2 Flash Suppressor• An improved version of the Phantom – no bottom

slot avoids a dust signature when firing prone• Superior flash hiding in all conditions• For standard muzzles (1/2" x 28 T.p.I.), machined

from quality gun steel with a final phosphate coating to mil. specs

Phantom . . . . . (YHM-28-5C1) $36.95

Note: Crush Washer or Peel Washer is required for correct timing.

A2 Bird Cage Flash Suppressor• Five Slot Design (threaded 1/2" x 28 T.p.I.) without

a bottom slot to avoid dust signature when shooting prone position

• Peel Washer or Crush Washer is required for correct installation timing

A2 BirdCage Flash Suppressor

. . . . . . . . . . . . . . . . . . . (9349051) $6.50

Note: Even if pinned on/welded over, this Suppressor is NOT long enough to make a 14.5" barrel legal for use on a semi-auto rifle.

(

5

A1 Bird Cage Flash Suppressor• Original “Birdcage” from the Viet Nam era –

has six equally spaced slots all around – needs no specific slot timing. Standard 1/2" x 28 T.p.I. threading

• For installation use the Flash Hider Lock Washer (below)

A1 BirdCage Flash Suppressor

. . . . . . . . . . . . . . . . . . . . . . . . . . (8448576) $6.50

A2 Peel Washer (9349052) $3.15A re-usable multi-layer washer for the correct timing of suppressor or brake installations on threaded muzzle barrels

A2 “Crush” Washer (12991533B) $2.95Used at Bushmaster factory for positioning suppressor and muzzle brake installations – for one time use only

A2 Flash Hider Lock Washer (8448577) $.60

Russian Design AK74 Type Muzzle Brake• A 5.56/.223 caliber copy of the very effective Russian

Military brake found standard on the AK74 Rifle• Screws onto threaded muzzle barrels and locks in place

with an Allen head set screw (Note: a peel washer or crush washer is required for correct timing during instal-lation). 3" overall length

• Muzzle climb is controlled by three upper gas ports – recoil is diminished by four 45° ports directing gas at an angle from the weapon, and a contoured flat at the end of the brake directs gas sideways

• “Post-Ban” model slips over non-threaded muzzles (.700” diam.) and pins in place (taper pin included)

For Threaded Muzzles . . . . . . . . . . . . . . . . . (MMT-0012A) $27.95Fits standard threaded barrels - 1/2" x 28 T.p.I.

“Post-Ban” Model forNon-Threaded Muzzles . . . . . . . . . . . . . . . (MMT-0012PB) $27.95

Requires taper pin drilling / pinning. Bushmaster factory installation is recommended.

18 Orders 24 Hrs: 1.800.998.7928

Y COMP Muzzle Brake for Threaded Muzzle Barrels• These 5.56mm/.223 compensators are threaded to fit

“Pre-Ban” AR barrels• The Y Comp overall length is 3 1/4" - the Mini Y Comp

is 2 5/16" overall length• These brakes will fit barrels with muzzles threaded

1/2" x 28 T.p.I. (threads per inch) • Order either a Crush Washer or Peel Washer

for installation

Y COMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(YHM-258) $48.95Mini Y COMP . . . . . . . . . . . . . . . . . . . . . . . . . . . .(YHM-259) $31.95

Y COMP Muzzle Brake for “POST-BAN” Rifles• CNC machined from quality gun steel – with manganese

phosphate final finish• They slip over Post-Ban muzzles and are held in place

with a steel taper pin (drilling for taper pin is required for installation)

• Angled ports on each side deflect gases, upper ports control muzzle rise

• Mini Y Comp adds 1 3/4" additional length to the Post-Ban barrel – Y Comp adds 2 5/8"

Mini Y COMP . . . . . . . . . . . . . . . . . . . . . . . . . . (YHM-259P) $31.95

Note: Bushmaster will only warranty factory installations of these muzzle brakes - no installation charge if purchased from Bushmaster.

Threaded Muzzle Brake / Flash Suppressor Adaptor for Bushmaster Carbon 15 Models• This Collar Adaptor allows installation of standard flash

suppressors and compensators on original design Carbon 15

• Machined from high quality steel and aluminum; matte black finished; threaded 1/2” x 28 T.p.I. pitch for stan-dard .223 / 5.56 suppressors/compensators

Phantom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (AZ15133) $26.50

Note: Depending on the type of “timed” suppressor or compensator you want to install, you may need to order a Crush Washer (Part# 12991533B - $2.95) or a Peel Washer (Part# 9349052 - $3.15).

Shoot-Away Muzzle Cap• Red plastic muzzle cap

designed to slip over AR15/M16 barrels to keep out dirt and moisture

• Thin plastic can be shot through safely if necessary

Muzzle Cap . . . . . . (RCL-10) $.45

“CAR 15” Flash Suppressors• High quality, manufactured in the U.S.A. – the six slot

design makes these suppressors very effective on the short barrelled carbine

• For threaded muzzles only (threaded 1/2" x 28 T.p.I.)

A. CAR 15 Extended Flash Suppressor . . . . . . (MMT-500) $15.955.5" overall length – threaded for all Pre-Ban barrels

B. Shorty Look Slip-over Flash Suppressor (Std Barrels .610@Muzzle) . . . . . . . . . . . . . (MMT-0019) $15.95

B. Shorty Look Slip-over Flash Suppressor (Hvy Barrels .720@Muzzle) . . . . . . . . . . . . . (9349SFSH) $20.95Internal threads allow a “slip-over” installation onto the barrel - giving your gun a “shorty” look without sacrificing accuracy – 5" overall length

C. CAR 15 “Original” Flash Suppressor (1005-914-3902) $15.95This is the original 4.5" M177 carbine design

A

B

C

5.5" AK74 Muzzle Brake (5.56mm/.223 Carbines)• A very functional muzzle brake for the short barrelled

carbine - 5.5" overall length, when permanently installed on the 11.5" barrel, makes a legal 16" barrel length.

• A Peel Washer is included for “timing”(positioning of brake on muzzle).

• Threaded to fit standard muzzles (1/2" x 28 T.p.I.)

5.5" AK74 Muzzle Brake (5.56mm/.223 Carbines) . . . . . . . . . . . . . . . . (MMT-0013) $31.95

Gov’t. Issue Type Blank Firing Adapters• Allows the AR15 type gas system to function

with blank ammo• Made of heavy steel with a finish of bright paint for

safety – fits over A2 birdcage flash suppressor on 16" & 20" barrels

• Warning! Remove these adapters BEFORE Firing Live Ammo!

Red Firing Adapters (16" & 20" barrels) . . . . . . . (RAY-008) $15.95Yellow Firing Adapters (11.5" & 14.5" barrels) . (RAY-010) $15.95

Barrel Parts / Compensators / Suppressors / Muzzle Brakes


Magazines / Magazine Accessories

Bushmaster Stainless Steel .223 Magazines• For heaviest Law Enforcement and Military duty• Available in 20 and 30 round

20 Round Stainless Steel Magazine . . . . (8448670-20-SS) $24.9530 Round Stainless Steel Magazine . . . . . . . (8448670-SS) $24.95

Bushmaster 6.8mm SPC Magazine• Specific to 6.8mm SPC Rifle• 10 round and 5 round models have

same shell as 26 round but blocked to indicated capacities

• Include anti-tile followers

26 Round . . . . . . . . . . .(8448670-68) $35.9510 Round . . . . . . . . (8448670-68-10) $35.955 Round . . . . . . . . . . (8448670-68-5) $35.95

Bushmaster 10 Round Straight-Body Magazine• 10 round capacity steel mag• Black finish and follower• Originally designed for M17S Bullpup,

but works in all AR type rifles

10 Round Straight-Body Magazine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (30-452) $20.95

Bushmaster Magazine Springs• Quality tempered steel springs for long memory

and positive feed

20 Round Magazine Spring . . . . . . . . . . . . . . (8448671-20) $3.9530 Round Magazine Spring . . . . . . . . . . . . . . . . . (8448672) $3.95

Bushmaster Magazines• Offer durability, value, and guaranateed fit and function in .225/5.56mm AR15 type rifles

• Boxes stamped with progressive die for tightest tolerances

• Seam welding process optimized for weld ingot, strength and Mil-Std compliance

Standard .223 Magazines30 Round Magazine . . . . . . . . . . . . . . . . . . . . . . (8448670) $20.95As shipped with most Bushmaster rifles.

20 Round Magazine . . . . . . . . . . . . . . . . . . . (8448670-20) $20.95Shorter, slightly curved body.

10 Round Magazine . . . . . . . . . . . . . . . . . . . (8448670-10) $20.95

5 Round Magazine . . . . . . . . . . . . . . . . . . . . . (8448670-5) $20.95Blocked for hunting use.

s

20 Round

30 Round

10 & 5 Round

40 Round Magazine for the AR15/M16• Matte gray finished box• Mil. Spec. green follower• Check local regulations

40 Round Magazine for the AR15/M16 . . . (MG-0007) $24.95

30 Round Magazines for Bushmaster 9mm Pistol & Carbine• Either molded black polymer

composite or metal• Can be disassembled

for cleaning• Metal magazine has indicator

holes and quantity markings

Black Polymer . . . .(AZ9-00001) $28.95Black Steel . . . . . .(AZ9-00003) $59.95

NOTE: With the 2004 “Sunset” of the Federal Gun Legislation of 1994, many features of AR15 Type Rifle are again available – BUT not in all States! Some States have their own Statutes regarding the legality of “Assault Weapons” and the High Capacity Magazines used in them. To avoid legal problems, check your local Statutes (both State and County) before ordering High Capacity Magazines (greater than 10 round capacity). If in doubt, consult the Bushmaster Sales Dept. (1 800 998 7928).

20 Orders 24 Hrs: 1.800.998.7928


BA50 Rifle & Carbine Magazine• Heavy steel box magazine• Laser engraved Bushmaster logo• Manganese phosphate finish

with black follower and removable floorplate

BA50 Rifle & Carbine Magazine . . . (BMG-17972A) $99.95

FN .308 Magazines• 7.62mm FN FAL magazines• All steel construction

20 Round . . . . . . . . . . . (MAT-004) $29.9510 Round . . . . .(8448670-10-308) $33.955 Round . . . . . . .(8448670-5-308) $33.95Steel FN Magazine Loader . . . . . . . . . . . . . . (MAT-001) $8.95

Easy Loader• Loads all sizes of AR magazines

Easy Loader (8448670 – EL223) $42.50

Easy Loader – For Stripper Clips (8448670-EL223SC) $42.50

The MagPul (Set of 3)• Accessory for the AR15/M16 for quick magazine change• Molded black rubber MagPul with rough exterior

texture and finger loop

MagPul (Set of 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . (MP-3) $10.95

Enhanced Magazine Rebuild Kit for 5.56/.223 30 Rd. Magazines• Enhanced drop-in, Anti-Tilt Follower• Chrome silicon spring (USGI design)

Enhanced Magazine Rebuild Kit . . . . . . . . . (MAG205-Gray) $11.95Follower Only . . . . . . . . . . . . . . . . . . . . . . . . (MAG111-Gray) $1.95

Standard Magazine Rebuild Kits• Mil. Spec parts to refresh magazine

30 Rd. Mag. Rebuild Kit . . . . . . . . . . . . . . . . (8448670-30K) $6.5020 Rd. Mag. Rebuild Kit . . . . . . . . . . . . . . . . (8448670-20K) $6.50

Green Magazine Followers• Plastic replacements for 5.56mm/

.223 Remington magazines

30 Round . . . . . . . . . . . (8448672) $1.9520 Round . . . . . . . . (8448672-20) $1.95

NEW Bushmaster 450 Magazine• Heavy-duty stainless steel AR

type magazine box• Single stack follower

5 Round . . . . . . (8448670-45-5) $35.959 Round . . . . . . (8448670-45-9) $44.95

Magazine not included

ne

es

r Clips.50

Model for use with loose Stripper Clips.

Model for use with loose ammunition.


MagPul Rubber Floor Plates (without Loop)• Replacement floorplate assembly for 30 round

AR15/M16 magazines• Rubberized bumper pad overmolded onto

stainless steel plate

MagPul Rubber – w/o Loop (Set of 3) . . . . . MAG024-BLK) $21.95

NEW 30 Round Polymer with Window Magazine(MAG210-BLK) $17.95• Constant-curve internal geometry for smooth feeding• Anti-tilt follower for increased reliability• Storage/dust cover• Stainless steel spring for

corrosion resistance• Textured gripping surface• Ambidextrous MagLevel

round indicator windows

5 Round Magazine for Bushmaster 450(8448670-45-5) $35.95

• Heavy duty stainless steel 20 Rd. AR type magazine box

• Blue single stack follower • Magazine must be loaded by

sliding cartridge under feedlips (for conventional .223/5.56mm)

zine

55


Command Arms Mag-Loader (FBS-ML556) $12.50• A new AR15/M16 Magazine

Loader for 5.56mm/.233 caliber am-munition

• Works with M16/AR15, Ruger Mini-14, and similar magazines

The “L.U.L.A.” Mag Loader (8448670-LULA) $25.50• L.U.L.A. is a “Loader/Un-Loader

Accessory” that will load a 30 round Mag in about 35 seconds, and unload it in 5

• Fits all capacity 5.56mm/.223 AR15/M16 type magazines including Thermolds and Orlites

“L.U.L.A.” Mag Loader for 9mm . . . . . . (24218) $31.95

Triple Mag Connector (BC-100) $26.95• Connect 3 – 30 round

magazines together in this black anodized aluminum mount – for a 90 round total capacity

• Clamps solidly together with Allen head screws

AR15/M16 Magazine Connector (51-08-01) $25.50Hold twice the ammo with this side by side magazine clamp – fits both 20 and 30 round mags. When you empty one magazine, drop them out, move over to the full one, and quickly reinsert. Made of heavy steel with flat black finish. Screw slot is sized for use with a coin – works with AR 180 magazines as well.

MagPul Ranger Floor Plate with Loop• For 5.56mm, 30 round AR15/M16 magazines• Integral loop, floorplate lock and mag. Identifier

MagPul Ranger (Set of 3) . . . . . . . . . . . . . . (MAG020-BLK) $21.95


r

r

ds,

s

. .1.95

CCCCCCoCCCoCCCCCCCCCC mMMMMMMMMaMaMMMMMMMMMMMMMMMM g(((((F(FF(FFFF(FF(FFF(FFF( BBBFFF S-M

• A nLoa5.5mu

• WoRugand

by and e r to de

n –ll.ll

NOTE: With the 2004 “Sunset” of the Federal Gun Legislation of 1994, many features of AR15 Type Rifle are again available – BUT not in all States! Some States have their own Statutes regarding the legality of “Assault Weapons” and the High Capacity Magazines used in them. To avoid legal problems, check your local Statutes (both State and County) before ordering High Capacity Magazines (greater than 10 round capacity). If in doubt, consult the Bushmaster Sales Dept. (1 800 998 7928).

Magazines not included


Buttstock Mag Pouches for the AR15 • Strap an extra magazine on with these

heavy duty pouches• Models available for ambidextrous installation

on either the A2 Trapdoor Buttstock or the CAR Telescoping Stock

• Black nylon webbing construction with heavy-duty velcro flap

A2 Solid Buttstock Magazine Pouch . . . . . . . . . . . . .(TTMP) $31.95Telestock Magazine Pouch . . . . . . . . . . . . . . . . . . . . (TTTS) $31.95

Magazine Coupler (FBS-MCUP1) $12.95 • Joins two 30 round magazines• Molded of black plastic with steel clamping screws


22 Orders 24 Hrs: 1.800.998.7928

Competition Shell Deflectors • Snap onto AR15

models to keep hot brass under control and away from other competitors on the firing line

• Allowed under NRA High Power Competition Rules

A. A2 Fixed Carry Handle (BD-A2) $22.95B. A3 Flat-tops (BD-A3-Flattop) $22.95C. A3 Removable Handle (BD-A3-Handle) $22.95

Bag Style Brass Catcher (2693828) $42.50 • Black Cordura nylon bag with an internal frame

and a zippered opening on the underside for easy emptying of shell cases

• 2" wide velcro strap wraps around the handguard to hold the bag and frame in place so that it fits flat-top and other AR15 type rifles

AR15/M16 Magazine Dust Covers (ATI15223) $7.50 • Flexible, molded black rubber caps snap over the the

magazine top to keep out dust and water• Sold in Sets of Four – designed

to fit standard AR15/M16 metal magazines

AK47 Magazine Dust Covers (ATI0762) $7.50 • Specifically molded to fit AK magazines –

similar to AR type shown• Sold in sets of four

Three Magazine Pouch • Sewn of Cordura nylon, with

a silent clasp, suspension ring, and two belt clips

Black . . . . . . . . (6451) $16.95 (ea.)Olive Drab . . . . (6452) $16.95 (ea.)

Mag-Brush• Keeps your magazine well and mags clean – helps

keep your firing chamber clean

AR15, Mini 14 & 9mm UZI . . . . . . . . . . . . . . . . . . (MAG206) $6.50.22; 10 mm; .38 Super . . . . . . . . . . . . . . . . . . . . . (MAG204) $6.50

Universal Magazine Tool (UMT) $6.50 • Pocket sized tool that will load or

unload any magazine on the market today• Molded of heavy black plastic – includes a

convenient brass key chain

“ShotLock” Cable Lock for AR15 / M16(SLC3000) $8.50• Keyed, 13" cable lock

system will ensure safe storage of your rifle

• Locks through open ejection port and magazine well

Fits V Match / Varminter / Predator

A2 Type – others similar

Rigid Brass Catchers for AR-15 type Rifles • Hard plastic brass catchers hold a minimum

of 60 casings• Molded of black, nylon reinforced plastic

AR15/M16 A2 Fixed Handle Rifles . . . . . . . . . .(EL-AR-001) $37.95AR15/M16 “Flat-top” Rifles w/o A3 Type Carry Handle . . . . . . . . . . . . . . . .(EL-AR-002) $37.95AR15/M16 A3 Removable Carry Handle . . . . . .(EL-AR-003) $37.95

Stripper Clip Guides (right)(EGSS-02) $1.00 (ea.) Stamped steel with phosphate finish

Stripper Clip (below)(EGSS-01) $.35 (ea.) $.30 (ea.) (quantities of 25 or more)

A

B

C





Spec-Ops Mamba Combat Sling for Telestocked M4 & other Carbines (100240101) $39.95• First sling designed for full contact engagement• Left or right handed shooters• Offers fast and easy transitions with a “tensioned

triangle” design to eliminate interference with body-mounted load bearing equipment

• It’s tubular web construction is super strong, and twist and tangle-free

• Compatible with SOPMOD components, the Mamba’s static-side “traverse” strap prevents sling from tangling in weapons mounted sighting or lighting systems

• Does not use any metal snap clips, velcro or other noise-making hardware

Turner Saddlery Leather Competition Sling(TS-NMPTRS) $74.50• National Match Police Tactical Rifle Sling is

premium quality, black, 11 oz. strap leather• 54" in length with numbered holes• Fitted with Mil Spec Parkerized steel hardware and

copper rivets, and the short strap is stitched with bonded nylon thread to resist rot

Tactical “Silent Sling” for Carbon 15 Rifles and Others(AZ723) $41.95• As supplied on the Carbon 15 97S Rifle, this

quality tactical sling will fit any other Bushmaster Carbon 15 Rifle

• Adaptable to various other firearm• This sling offers multiple carry modes, and is sewn

of durable, black ballistic nylon with easy Velcro strap attachment mechanisms

Mamba Combat Sling for Fixed Stock Rifles (100240201) $39.95• Designed with a custom positioning “Speed-Lok” feature• Spec-Ops Mamba Slings allow the wearer to balance

and position the weapon according to situational requirements

• Unique stretch section built into the sling allows the user to strike an opponent with the weapon’s muzzle (”barrel thump”) while still keeping the weapon slung and in ready position

• Adjusting buckles allow “pre-setting” the sling for operator’s body size

Also available: The Spec-Ops Universal Mamba Sling . . . . . . (100240501) $49.95For ambidextrous mounting to either carbines or full stocked rifles – with all the Spec-Ops Mamba features described above.

The Master Blaster Combat Sling . . . . . . . . . . (100300101) $29.95Designed for combat shotguns and tactical rifles. Features two adjustments for quick transitions & body sizing, and quality tubular web construction.

d the short with ead

Government Issue Sling(12624561) $5.50• A 1-1/4" wide black nylon web

sling – 54" long, with two black metal buckles

1 1/4" Wide Padded Rifle Sling (AS-60) $13.95• For AR15/M16, or a variety of other rifles • Black webbing with a comfortable shoulder pad,

and two black metal buckles

Button Sling Double Bungee “Throw & Go” Single Point Tactical Carbine Sling (TGPT) $39.95• High quality black nylon tubing with internal

bungee cords make this sling uniquely adaptable to Tactical situations

• The sling attaches to the rifle with the “Button” endplate shown on next page, and offers length adjustment, comfort and instant readiness

tubular web construction.

Slings & Bipods

24 Orders 24 Hrs: 1.800.998.7928

Slings & Bipods

Bushmaster Modular Accessory System Rail Sling Mount (YHM-9485S) $24.50• Attach a sling to any accessory rail (Picatinny or

Weaver type) with this B.M.A.S. Rail Sling Mount• Clamps onto a rail system or forend rail

segment, and locks down with one button head Allen screw

• Includes the swiveling sling stud below mounted on an anodized aluminum base

Steel Side-Sling Adapter (12598617K) $24.95• Allows mounting a

sling to the side of the barrel for easier ready position carry

• Machined from gun steel, it is adaptable to both standard (.625" diam.) and heavy barrels (.750" diam.)

Bushmaster Modular Accessory System Swivel Sling Stud (YHM-9469) $4.75• Fits our Four-Rail Forearms and other B.M.A.S.

accessories to provide a sling attachment point that won’t deflect the barrel when pulled tight

• Rotates 360° – machined steel with black phosphate finish – threaded 5/16 x 32

• Use with any standard Q.D. sling loop

Bushmaster Sling/Bipod Stud (B-0807) $5.95• Mounts to any standard, Quick

Detach type sling swivel • 3/8" shaft is threaded 10/32• Use a #21 drill bit before tapping

A2 Buttstock Sling Stud (KNS-5) $14.95• This phosphate finished steel stud

replaces the old rear sling loop on standard A2 solid buttstocks

• Accepts any standard Quick Detach type sling swivel

Syst

Quick Detach Sling Swivels (KNS-4) $12.95 (pair)• These 1 1/4" Loop Quick Detach Sling Swivels

are heavy steel with a phosphate finish and a screw locking knob to ensure that the sling won’t work loose from the rifle.

• Fits any firearms with standard sling swivel studs installed

Quake Industries “Claw” Non-Slip Sling (51000-0) $38.95• High quality sling sewn with 1" wide black webbing• Includes a flexible, molded rubber shoulder pad that

offers silence, comfort and won't slip• Universal design sling – adaptable to many different rifle

Button Sling Carbine Endplate • This phosphated finished steel endplate replaces the

telestock locking collar on your carbine to provide a solid mounting point for the one point sling at left

• Heavy duty tab slips onto the button for a secure mount

Right handed shooter . . . . . . . . . . . . . . . . . . . . . (M4-M16) $19.95Left handed shooter . . . . . . . . . . . . . . . . . . . . . .(M4L-M16) $19.95

Bushmaster Modular Accessory System Bipod Adapter (YHM-638) $31.95• This attachment will adapt Harris (or other) bipods

to the B.M.A.S.• Triple Mount or other accessory rail segments• Machined from Aircraft Aluminum – then black

anodized to a mil. spec. finish – with steel bipod stud• Mounts to any Picatinny or Weaver type rail

Equipment Mount for Rails (FBS-BP1) $31.99• Mounts to any Picatinny or Weaver type rail with a push

button lock mechanism• Molded of high density black polymer with a standard

stud for sling or bipod mounting

Button Sling Endplate in position on carbine for right handed carryd carry


NEW Sling Stud for MagPul PRS (10011) $5.00 (pair)• Replaces one of the four Socket Button Head

Cap Screws found on the Magpul Precision Rifle Stock (PRS) with a sling stud

• Threaded straps can be reversed giving 8 choices for stud placement

• Each BT14 comes with a black polymer spacer

Ambi Sling Connector (10002) $29.99• Ring is designed to hold weapon flat against body –

your rifle will hang naturally at the ready• Fits all AR / M4 collapsible stocks• Solid, all steel construction• 100% Made in USA• Lifetime warranty

Bushmaster Modular Accessories System Front Sling Mount & Accessory Rail(YHM-9574) $78.50• Designed to clamp into the standard AR Front Sight,

this mount combines a sling stud and Picatinny rail section for attachment of flashlight or laser accessories

• Two discs fit into the sight, lock together with Allen head screws, then the rail screws into those and is oriented by means of the large knurled nut

• Anodized aluminum with steel screws and stud

Sling Mount Loops • For vertical carry mounting, the front loop mounts

onto the sight assembly• For buttstock application, attach the loop onto the

stock’s rear sling loop• Phosphate finished, heavy spring steel wire

Front & Rear Set - 2 Loops . . . . . . . . . . . . . . . . . (2698877K) $8.50 or, Sold Individually . . . . . . . . . . . . . . . . . . .(2698877) $5.50 (ea.)

Shown installed and separately.


Bushmaster Modular Accessories System Tactical Sling Adapter (1005-914-2942-T) $14.95• A Tactical Sling Adapter made for attaching

various types of slings• Allows mounting either web type slings or

those that have “lobster claw” type clips• Phosphate finished steel adapter plate replaces

your telestock receiver end plate, and allows ambi sling mounting on the primary, or offside shoulder position for a comfortable “tactical” carry

Bushmaster Modular Accessories System Front Sight Sling Mount (YHM-9468) $31.95• This Bushmaster Modular Accessories

System Sling Mount installs easily (with three Allen Screws) to position the sling along the side of the front sight for a comfortable carry

• Includes a swiveling stud which accepts standard quick detach sling mounts

at the readystocks

Harris Ultralight Bipods • Versatile, sturdy, light, and fast• Folding legs w/completely adjustable

spring-return extensions • Sling swivel attaches to the clamp• Quality manufactured with heat treated steel and

hard alloys - all black anodized finish• Swivel 45° for instant leveling on uneven ground • Leg Length: 13" Extended/9"Retracted. Harris Model L

will mount directly onto Varminters & Predator• V Match rifles require installation of Sling Bipod Stud• Ribbed AR Handguards

require the HE-001 adaptor• For mounting to accessory

rails, use the Command Arms FBS-BP1 or our Bushmaster Modular Accessories System Aluminum Bipod Adapter

Harris Model L – for XM15/ AR15/M16 & others. . . . . . .(HE-002) $118.95

Harris Bipod Adapter for AR15 Handguards. . . . . .(HE-001) $14.95


26 Orders 24 Hrs: 1.800.998.7928

A2 Standard Pistol Grip(9349127) $12.95• Standard A2 hollow pistol grip

of molded black plastic with raised finger ridges, checkered panels and a ribbed backstrap

Pistol Grip Screw . . . . .(AN501D416-18) $.65Pistol Grip Washer . . . . . (MS35335-61) $.45

Hogue AR15/M16 Pistol Grip• Easy, one screw installation on

your AR15/M16

Pistol Grip only . . . . . . . . .(15000) $31.95

Pistol Grip Plug (SCH-5) $4.50• Turns any standard A2 pistol grip

into a “stowaway” grip for storage of small items

• Molded of black rubber, snug friction fit holds it inside the grip cavity

Tactical Stow Grip(FBS-G27) $25.95• “G27” type storage grip is

molded from a synthetic material proven to minimize slippage when wet

Bushmaster Modular Accessories System Solid Vertical Forearm Grip(YHM-9400) $36.95• Heavy duty “broomstick” style

foregrip slides onto Picatinny rail forends and rail accessory systems

• Adds stability to your weapon’s handling, and helps control muzzle rise in rapid fire

The “Gapper” (SCH4085) $3.95• Fills void between the pistol grip and the

back of the trigger guard – molded of flexible black polyurethane

AR15/M16 Tactical Grip (ARG01) $63.95• Adjustable palm swell style grip

adapts easily to different sized hands and puts pressure in the palm of the hand to allow a deliberate and calculated trigger pull

• Molded of heavy black plastic

ErgoGrip Tactical Deluxe Pistol Grip (SCH4045) $42.00• Ambidextrous grip that mounts

universally to any AR15/M16 rifle lower receiver

• Injection molded with an overmolded rubber Sure Grip™ textured finish, and offers a raised rear extension for improved hand web support and weapon control

ErgoGrip Vertical Forend (ARG-FWD) $52.95• Mounts to all Picatinny rail and

Weaver base type rails

AR15/M16A2 Stowaway Grip (56PT87SPG2) $13.95• This M16A2 configuration grip – with a

serrated backstrap and finger groove – features a trap door storage compartment for holding cleaning gear or small parts

Bushmaster Modular Accessories System Forward Pistol Grip Assembly (9349127-FWDGRP) $42.50• Combines a rail mount clamp with

a standard AR A2 composite plastic pistol grip that allows easy mounting onto the Picatinny rail section of various rail accessory system

Pistol Grips & Buttstocks

5) $3.95t l i d th

Bushmaster Modular Accessories System Folding Foregrip (YHM-9640) $79.50• The mounting base incorporates a push-button mechanism

for fast deployment • Base mounts to any

Picatinny rail with one Allen head screw – can be mounted to fold the grip forward or backward according to preference or other accessory usage


Command Arms Ergonomic Vertical Foregrip (FBS-AVG) $19.99• An ergonomically designed

tactical vertical grip• Improves performance and

reaction time• Fits the hand well with finger grooves,

and includes a plugged storage compartment for small parts/batteries

• Weight is .34 lbs., it fits all Picatinny Rails, and carries a Command Arms Lifetime Warranty

Command Arms Flashlight Grip Adapter (FBS-FGA) $69.99• Multi-tasking foregrip combines a flashlight mount

for 1" diam. lights, and vertical grip all in one – as well as including an accessory rail section that serves as a laser mounting point, and a battery or small parts storage compartment within the grip

• Thumb activated push button on the back of the grip operates the flashlight’s on/off switch and allows for signaling

• Removable side plates on the grip utilize a rubber surface to enable installation of a pressure switch underneath the side plate

• Fits all Picatinny Rails, clamps on with thumbnuts for a “no tools” installation, and has Command Arms’ Lifetime Warranty

hlight s on/off switch inges on er

s, clamps on with tools” installation, and ’ Lifetime Warranty

Mission Adaptable (MIAD) AR15/M16 Grip Full Kit (MAG050-BLK) $35.95• Grip kit has removable / replaceable front and rear

panels for a custom fit over multiple hand sizes• Features improved ergonomics and positive anti-slip

texture on both sides and rear backstrap• Removable inner core that allows for storage (3 round

plug included) Custom storage of batteries (waterproof) or bolt/firing pin is available with optional cores

• Kit includes 3 size backstraps (S,M,L); 4 frontstraps including integrated enhanced trigger guard, 3 round core plug, and installation hardware

Command Arms ACP Adjustable Cheek Piece (FBS-ACP) $29.99• Adjustable Cheek Piece for the CBS Telestock• Slides onto the Picatinny Rail Block, and offers height

adjustment for eye alignment with optics, and horizontal adjustment along the tele’s side rail

• Molded from reinforced polymer, this cheekpiece is ambidextrous with mounting options for either left or right handed shooter

• Command Arms Lifetime Warranty

ves,

eriesny

ms

Command Arms CBS 6 Position Collapsible Stock (FBS-CBS) $60.49• Tested and recommended by the NTOA

(National Tactical Officers Association)• Six Position Collapsible Stock with a rubber,

non-slip recoil pad• Features a Picatinny Rail Block and a Storage

Compartment for CR123 batteries (4 total) or other small items

• Rail Block and Compartment are ambidextrous in design and easily switched from side to side

• Two metal inserts (the round cutouts front and rear) allow for the addition of optional Q.D. sling adaptors

• Fits commercial size tubes

Command Arms CBS Stock with Extension Tube, Spring & Buffer (FBS-CBSK) $122.95• All parts needed for a complete swap-over from a

standard A2 stocked rifle to this new Command Arms CBS 6 Position Telestock configuration

28 Orders 24 Hrs: 1.800.998.7928


Bushmaster Stubby Stock with Carbine Buffer and Action Spring (9349119-S-KIT) $69.50• This version of the standard A2 buttstock (3.25" shorter)

makes the AR type rifle easy to carry in confined quarters - not much longer than a compressed telestock, but just long enough to be legal length with 16" barrelled guns and sized well for women and younger shooters.

• Comes complete with carbine length Buffer and Spring• Standard rear sling loop is mounted, and the solid

buttplate (no trapdoor storage compartment) is smooth and comfortable on the shoulder

• Length 7.25 inches / Weight 14.6 oz.

Complete Bushmaster Lower with Stubby Stock (A LOW STUBBY) $340.00• An FFL is required for purchase –

or see your FFL Dealer

Complete A2 Trapdoor Buttstock Assembly (A2 STK COMP) $79.95• The newer A2 design is 5/8" longer than original

A1 for greater shooting comfort and improved trigger pull length of 13.5"

• Trapdoor storage space in the buttstock provides room for spare parts or an Otis Buttstock Stowage Cleaning Kit (see Gunsmithing Section)

• Includes Buttstock w/Trapdoor Buttplate, Sling Loop, Buffer, Buffer Tube, Buffer Spring, Spacer and Vented Buttplate Screw

Camouflage Finished Pistol Grip/ Buttstock/Handguard Sets These 3 Piece Sets – or individual parts – can now be added as accessory items to your rifle or carbine. High quality, tank dipped parts in either Desert Camo or Real-Tree® Hardwoods Camouflage Pattern

Magpul PRS Precision Rifle Stock (MAG300-BLK) $255.00• The Generation II Precision Rifle Stock (PRS™) is

designed to be a field precision stock• Adjustable for both height and length of pull, at it's

shortest LOP it is about the length of an A1 type Stock and extends about 1/2” longer than an A2 stock

• Features a billet machined buttplate with a rubber butt-pad, mil-spec phosphated steel shafts, and aluminum ball detent knobs

• The PRS easily replaces the standard AR15/M16 stock and uses stock A1/A2 rifle length receiver extension without the A2 spacer – comes with all mounting hardware and two ambidextrous 1.25” sling loops that can be positioned front or rear

• Weight: 1.855 pounds / Retracted• Length: 10.45" / Extended Length: 11.45" / Height

Adjustment: 0.75" / Rubber Butt-Pad Thickness: 0.25"

PRS Stock with Slip-on LimbSaver Recoil Pad

mounted (sold separately)

PRS Stock – left side showing Std. Buttpad and sling loop

r

0or purchase –ler

Command Arms Saddle for Bushmaster Telestocks (FBS-SST1) $21.99• Fits new style BFI Telestocks and others• Improves cheek support and head stability while aiming• Eliminates head movement and fatigue • Waterproof storage compartments for cleaning gear,

or six CR123 batteries• Sling loops are incorporated into the mounting blocks• Lifetime Warranty from Command Arms

aster

fatigpartments fo

riesare incorporated into the m

me Warranty from Command Arms

RealTree® Hardwoods CamoRifle Length Handguards . . . . . . . . . . . . . . . (9349059-C) $39.95A2 Solid Buttstock . . . . . . . . . . . . . . . . . . . . (9349119-C) $54.95Standard Pistol Grip . . . . . . . . . . . . . . . . . . (9349127-C) $19.95CAR Handguards . . . . . . . . . . . . . . . . (1005-914-4572C) $29.95CAR Furniture SET . . . . . . . . . . . . . . . . . (CAMO-RT-CAR) $99.95RIFLE Furniture 3 PIECE SET . . . . . . . (CAMO-RT-RIFLE) $106.95

Desert CamoPistol Grip . . . . . . . . . . . . . . . . . . . . . . . . (9349127-DC) $19.95Trapdoor Buttstock . . . . . . . . . . . . . . . . . .(9349119-DC) $54.95CAR Handguards . . . . . . . . . . . . . . (1005-914-4572-DC) $29.953 PIECE SET . . . . . . . . . . . . . . . . . . . . . . (CAMO-DC-CAR) $99.95

( )


Delta Style Stock Cheekpiece (6200) $74.50• A quality accessory for your A2 buttstock –

designed to improve accuracy by eliminating parallax problems

• It shoulders easily and provides the proper cheek-weld for telescopic sight use

• Installs with no alteration to original butt cap or sling loop, and is designed specifically for the new style A2 stock (can be modified to fit the A1)

Complete Hook Style Buttstock Assembly (AR STK ASSY CHO) $95.50• Includes Stock, Trapdoor Buttplate Assembly, Buffer,

Buffer Tube, Buffer Spring, Spacer and Screw• The newer A2 design is 5/8" longer than original A1

for greater shooting comfort and improved trigger pull length of 13.5"

Hook Style Buttstock for AR15/M16 (16-01-02) $44.95• A molded fiberglass polymer stock offering the eye relief

of the newer M16A2 type with 1" additional length of pull• The “hook” gives added stability to sandbag rest when

shooting with left hand across the body and into the hook• Uses the standard issue buttplate but offers almost

double the storage – easily replaces the standard stock

Six Position Fiberite Telescoping Stock Assembly (1005-087-8988-PK) $106.95• Our standard telestock – a heavy duty design

incorporating a six position latch assembly • Ribbed body offers extra strength• A six position receiver extension, machined from

solid aluminum extrusion • Lower lip face acts as a timing edge to insure the

buffer retainer is held correctly and the extension is positioned correctly

Complete Fixed Position Tele-Style Stock Assembly (1005-087-8988PEK) $106.95• Includes Carbine Length Receiver Extension,

Buffer and Spring

Original Style Fiberite TeleStock Assembly (ALEO-001K) $106.95• Original style fiberite telestock body with

a four position telescoping aluminum extrusion extension tube

• Original design metal telestock buffer with cylindrical weights, and the carbine length buffer spring are included

Skeleton Stock Extended Recoil Pad (SKEL-1IN-BUTTPAD) $13.95• Extra thick, molded rubber Recoil Pad

fits all the Skeleton Stocks including the Shorty Model

• 1 inch in thickness, and 3.2 oz. in weight

• Installs easily in place of existing pad – screws are included

LimbSaver Slip-on Recoil Pad (Limbsaver-M) $36.99• A slip-on recoil pad that offers easy installation, recoil-

reducing technology and molding from proprietary NAVCOM™ Noise and Vibration Control Material

• Displace shock on a 0 to 2500 Hz spectrum and ensures maximum shock relief with excellent protection for the shooter

• Fits stocks from 4 13/16" height x 1 5/8" thickness up to 5 1/8" x 1 3/4", and the 1" thick pad will add 1" length to trigger pull

30 Orders 24 Hrs: 1.800.998.7928

NEW CTR Telestock (MAG311-BLK) $97.00• Mounts on Commercial Carbine Receiver

Extension tube (not included)• Premium chrome-silicon spring provides

positive locking and long service life• Supplemental friction lock eliminates accuracy

robbing wobble*• Sloping cheek weld combines a slim profile

with user comfort• Shielded release latch prevents snagging and

accidental operation• Side mounting slots accept optional cheek

risers for NON-AR15 / M16 applications• Compatible with Single-Point® sling mounts• Rear – Push-button QD sling mounts

accommodate up to 1.5" swivels (Ambidextrous)

• Rear / Bottom - 1.25" Sling loops

• Toe – Lanyard hole for custom para-cord rigs

• Black in color


Shorty Skeleton Stock Kit including CAR Buffer and Spring (SKEL-SH-STK-KIT) $148.95• Similar to the original Skeleton Stock above, but

with an overall length of 7 3/4" - weight of 12.8 oz. • The neoprene sleeve around the buffer tube offers

a comfortable cheek weld• A 1/2" rubber recoil pad, a sling swivel (mounts

either left or right side, or on buttplate base), a short Buffer Tube, a CAR Buffer and Spring, and all necessary screws are included to swap over from any AR type rifle or carbine

Shorty Skeleton Stock without those parts. . . . . . . . . . . . . . . . . . . . . . . . (SKEL-SH-STK) $134.95

Replacement Foam Sleeves for Skeleton Stocks Standard Stock . . . . . . . . . . . . . . . . . . . (SKEL-FOAM-OT-8.2) $4.50Shorty Skeleton Stock . . . . . . . . . . . . . (SKEL-FOAM-OT-5.5) $3.95NOTE: These sleeves install easier with WD40.

NEW R-15 Stock• Features Advantage® Max1™ camouflage pattern• Heavy duty design incorporating a six position

latch assembly• Ribbed body offers extra strength• Six position receiver extension, machined from

solid aluminum extrusion• Lower lip face acts as a timing edge to insure

buffer retainer is held correctly and the extension

is positioned correctly

Standard Stock . . . . . . . . . . . . . . . . . . . (1005-087-8988) $139.95

Skeleton Stock Kit for Changeover from a Tele-stock (SKELETON-STOCK-K) $154.95• Includes Skeleton Stock with Buttpad and Hardware

(as above) plus standard buffer tube, standard buffer and spring

The “Skeleton” Stock (SKELETON STOCK) $112.95• Radically different stock design for all AR15 type

rifles offers a comfortable neoprene foam sleeve and a skeleton frame

• A comfortable rubber buttplate is included, as is a swiveling sling loop that can be mounted forward left, or right, or on the bottom of the buttplate

• Length 10.5" / Weight 14.03 oz. *This does not include buffer tube, buffer or spring – (use already existing parts or buy the kit below)

Carbon 15 Youth Sized Buttstock (AZ15279) $26.50• Perfectly sized for the younger shooter, or smaller

woman, this Carbon 15 molded buttstock easily replaces the standard stock on Bushmaster Carbon 15

• Will not fit C15 Pistol receivers

• It’s 8 1/4" overall length yields a trigger pull length of 11 1/4"


Cheekpiece for Bushmaster Six Position Telestock (7200) $37.50• Designed to offer excellent cheekweld and appropriate

head position for scope and optic use, it fits the newer Bushmaster Six Position “ribbed body” telestocks

• Snaps securely onto the telestock body • Includes a watertight small parts storage compartment

in the upper portion of the cheekpiece, sealed with a rubber o-ring screw-in plug

Extended Buttplate for AR15/M16 (16-09-02) $24.50• Glass-filled, black plastic composite buttplate • Adds 1 1/4" length to the standard issue AR15/M16 buttstock • Does block access to the buttplate trapdoor• Also fits on the Stubby Stock

Cheekpiece for older Fiberite TeleStocks (7000) $37.50• This telestock cheekpiece allows the use of scope,

laser, or night vision devices with comfort• Molded of tough black plastic, it snaps on to most

older style fiberite telestocks with a secure pressure fit and features a built-in watertight small parts storage compartment that is sealed with an o-ring screw-in plug at top rear of the unit)

• Helps take all the “rattle” out of fiberite telestocksNote: For use on Fiberite Telestocks – will only fit the original type telestocks

Rubber TeleStock Butt Pads • These molded black rubber pads securely fit the

buttplate of the TeleStock to offer recoil reducing comfort and positive, non-slip shoulderinge

A. “Ribbed” Style TeleStocks . . . . . . . . . . . . . . . (2698828) $20.50 B. Older style TeleStock . . . . . . . . . . . . . . . . . . . (2698827) $16.95 Also fits the Carbon 15 Rifles with the original design buttstock – can be modified to fit new reinforced Carbon 15 Buttstock

BA

1 3

4,6 5,78

2

9 10 11 12 13

8 Telestock Bodies are NOT available separately.

Individual A2 Solid Buttstock Parts1. A2 Solid Buttstock . . . . . . . . . . . . . . . . . . . . . . (9349119) $37.502. Trapdoor Buttplate Assembly A2 . . . . . . . . . . (9381380) $21.503. Buffer – Standard . . . . . . . . . . . . . . . . . . . . . . (8448615) $15.954. Stock Spacer & Screw . . . . . . . . . (A2 STK SPAC/SCRW) $6.505. A2 Buttplate Screw . . . . . . . . . . . . . . . . . . . . . . (9349128) $3.506. A1 Buttplate Screw . . . . . . . . . . . . . . . . . . . . . . (8448627) $3.507. Receiver Extension - Std. A2. . . . . . . . . . . . . . (8448581) $21.958. Buffer Spring (Standard) . . . . . . . . . . . . . . . . . (8448629) $5.95

Individual Telestock Parts1. Buffer – Telestock . . . . . . . . . . . . . . . . (1005-914-4578) $16.952. Buffer – Telestock . . . . . . . . . . . . . . . . . . . .(8448730-M) $26.50 (Heavy weight for the M16M4 machine gun)

3. Buffer Spring (Telestock) . . . . . . . . . . . (1005-914-4564) $5.504. CAR Receiver Extension . . . . . . . . . .(1005-914-2929-6) $26.50 (for the newer style 6 Position Telestocks)

5. Telestock Locking Nut . . . . . . . . . . . . . . (5310-917-1154) $7.50 (for the newer style 6 Position Telestocks)

6. CAR Receiver Extension . . . . . . . . . .(1005-914-2929-P) $26.50 (for old style 4 Position Telestocks)

7. Telestock Locking Nut . . . . . . . . . . . . . . (5310-917-1153) $7.50 (for old style 4 Position Telestocks)

8. Telestock Receiver Plate . . . . . . . . . . . (1005-914-2942) $7.509. Telestock Slide Locking Pin . . . . . . . . . (1005-914-3229) $6.5010. Telestock Lock Pin Spring. . . . . . . . . . (1005-916-9178) $1.0011. Telestock Latch . . . . . . . . . . . . . . . . . (1005-087-8987P) $7.5012. Telestock Lock Pin Nut . . . . . . . . . . . . (5310-917-1215) $4.5013. Telestock Lock Pin Roll Pin . . . . . . . . . . . (MS16562-106) $.50

9349119: Includes Stock, Trapdoor Buttplate & Sling Loop

1 2

4

5 6 7

8

3

32 Orders 24 Hrs: 1.800.998.7928

Bushmaster Modular Accessory System Four Rail Split Handguards • The two piece design of these B.M.A.S. Handguard Sets

allows quick and easy installation of a Picatinny Four Rail Accessory System on most AR type Rifles*

• Machined of quality aircraft aluminum, they snap right in place of standard carbine or rifle handguards, and offer four full length Picatinny rails for the flashlight/laser sight accessories of your choice

• Rails are positioned at 12 - 3 - 6 – 9 o'clock• Top handguard can be used in conjunction with an M203

Grenade Launcher• Vented to keep your barrel cool, finished in mil. spec.

matte black anodize to eliminate glare and protect against corrosion

For Carbine . . . . . . . . . . . . . . . . . . . . . . . . . . .(YHM-9670) $191.50 For Rifle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(YHM-9803) $212.95*Note: These sets will not fit our DCM, or Gas Piston Carbine.

Bushmaster Modular Accessory System Handguard Rails • Add an accessory mounting point to any standard

rifle or carbine handguard with these Picatinny configuration rails

• Mounting requires removal of handguard and inner shield – they are screwed to the handguard through the existing vent holes

• Car Length Rail will fit on a Rifle length handguard• Due to possibility of movement, we do not recommend

installation of optics or lasers on these rails

B.M.A.S. Rail for Rifle Handguard . . . . (YHM-Hgd-Rail-Rif) $60.50 B.M.A.S. Rail for CAR Handguard . . . . (YHM-Hgd-Rail-CAR) $40.50

Bushmaster Modular Accessory System Integral Flat-top Forend • Designed to fit the A3 type “flat-top” rifles or carbines,

and mounts using a replacement barrel nut (included - major disassembly of rifle required)

• System free-floats the barrel, and features a sling mount-ing plate with swivel stud. This strong and light weight forend system is machined from aircraft aluminum, finished in matte black hard anodized, and vented to keep barrel heat to a minimum.

• Our BMAS Low Profile Rear Flip-up Sight (YHM-9680) is designed to fit behind this unit on the A3 Upper.

• The P-4 Carbine length model will fit on our A3 Gas Piston Carbine as it offers enough clearance over the gas piston housing

For Rifle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (P-12) $292.95 For Carbine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (P-4) $250.00

Bushmaster Modular Accessory System Four-Rail Free Floater Forearms • Four Picatinny rails are machined into these free floating

forends to offer your AR type firearm unlimited mounting options for sights, scopes, grips, lights, and lasers

• Venting slots all around aid in barrel cooling, and rail front edges are drilled and tapped to accept the B.M.A.S. Swivel Sling Stud

• The rifle model fits 20" and longer barrels; the carbine version is designed for 16" barrels

• Assemblies include forearm, barrel nut and jam nut. (barrel disassembly is required for installation)

Rifle Length . . . . . . . . . . . . . . . . . . . . . . . . . . .(YHM-9480) $169.95 Four-Rail Carbine Length . . . . . . . . . . . . . . . .(YHM-9479) $148.95*Note: This unit will not fit our Gas Piston Carbine.

Handguards & Accessories


ARMS #51C Slimline S.I.R. System for A1/A2Carbines with Solid Carry Handle(ARMS-SIR51-C) $429.95 • High quality technical forend for the AR15 Type

Carbine combines barrel free-floating, light weight, and a multitude of accessory attachment rails

• Slimline Model 51C in the ARMS S.I.R. System is intended to fit the A1/A2 Solid Carry Handle Carbines

• Leaves barrel free-floating from the barrel nut forward, and is approximately 1/4" narrower than other S.I.R. System models

• The S.I.R. Model 51C clamps solidly onto the Upper Receiver’s fixed carry handle (both the carry handle channel and the handle front support, utilizing two A.R.M.S.® self locking thumbnuts) to provide an ex-tremely rigid fit with no movement of rail or attachments

• Extended bi-level rail platform will mount various scopes, and red-dot or holographic sights, and offers the possibility of forward mounting optics to co-witness with the iron sights through the channel in the upper rail

• Total weight is 18.9 oz. including the two side and one bottom accessory rail segments and sling swivel

NOTE: This will not mount on the A3 Removable Carry Handle.

M33 Carbine Handguard Set (FBS-M33) $89.95• Features integral Picatinny rails under removable

rubber covers• Molded of high density black polymer, with stainless

steel heat shields and comfortable rubber rail covers• Available in Carbine length only – a direct snap-in

replacement for standard guards

Sure-Grip Panels for Multi-Rail Forends • Black rubber grip panels for all rail forends – with

Bushmaster logo molded in• Snap tightly onto the rails for a non-slip grip, rail

protection and handling comfort

A. Sure-Grip Full Length Rail Cover . . . . . . . . . . . (SCH-6L) $10.955 3/4" long for full length coverage on carbine forends. Covers fifteen rail slots. Molded of black rubber with 3 Bushmaster logos between raised ribs B. Sure-Grip 1/3rd Length Rail Cover . . . . . . . . . . . . (SCH-6) $3.951-3/4" black rubber grip panel (covers five rail slots) for Picatinny rail forends – with BFI logo.

A B

Carbine & Rifle Length M203 Handguards • Bottom is open to allow attachment of the M203

Grenade Launcher or similar type flare launchers• Government issue, molded black nylon with internal

aluminum heat shields• Snap into the handguard cap and delta ring in place

of standard handguards• Provides the leverage needed to compress the weld

spring inside the delta ring, and eliminates the need for a second pair of hands to help remove AR15/M16 two-piece handguards

For Carbine . . . . . . . . . . . . . . . . . . . . . . . . . . . . (12990563) $51.50For Rifle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (8448377) $46.50

Command Arms M44 Four-Rail Handguard Set• Quality Handguard Set featuring four Picatinny Rails

hidden under four removable rubber rail covers• The rails – positioned at 12-3-6-9 o'clock – offer

unlimited accessory attachment• Rubber covers add excellent grip comfort and protect

the rails when not in use• Internal metal heat shields dissipate rapid fire heat• A handguard tool (see our HGD-Tool) is recommended

for installation

For Carbine . . . . . . . . . . . . . . . . . . . . . . . . . . .(FBS-M44S) $112.99 For Rifle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (FBS-M44L) $136.99

For alternate optics mounting options for the A1/A2 solid carry handle carbines, see also the A.R.M.S. #39A2 Bi-Level Rail (ARMS-39) $148.95

34 Orders 24 Hrs: 1.800.998.7928


Low Profile Rail Covers • Covers protect your hands from sharp rail edges• Smooth low profile appearance, and protect rail areas

from damage• Molded of Black Santoprene in two lengths – easily cut

for custom applications

A. Five Slot Low Profile Rail Cover . . . . . . . . . . . (SCH-4370) $3.95B. Full Length Low Profile Rail Cover . . . . . . . . (SCH-4373) $11.95

A.R.M.S. #50 M-CV S.I.R. System for A3 Carbines (ARMS-50M-CV SIR) $319.00 • Carbine length 5.56mm/.223 cal. “Free-Float”system

that can be installed in less than 5 minutes directly to the standard barrel nut (without the Delta Ring)

• The Front Sight, Gas Tube, Front Handguard Retaining Cap, Barrel, and Barrel Nut do not need to be removed for installation, and no special tools are required (the S.I.R. Std. Sling Swivel is useable for installation as it is ground with a “screwdriver blade” on its end)

• Perfect alignment with the receiver can be accom-plished via built in alignment anti-rotation locking tabs

• Weighs 8.6 oz., includes Q.D. indirect air flow heat shields and throughly vented for superior barrel cooling

• Rail Segments at the 3, 6 and 9 o’clock positions can be exchanged, repaired or replaced without removing the top rail

NOTE: Rifle Length Handguards fit into the Triangular Cap. Standard Carbine Handguards fit into the Round Cap. M4 (Oval Profile) Carbine Handguards fit into either the Round Cap or the “notched” Round Cap. See Handguard Cap prices and part numbers.

A2 Rifle Handguards(9349059) $21.95 (pair)• Compression molded of black polymer composite

material (not injection molded – these will not melt during full auto or rapid fire)

• Non-reflective matte black finish, and are designed to fit rifles with the Triangular Handguard Cap

• Internal Aluminum Heat Shields are included to protect hands from barrel heat buildup

A2 Carbine Length Handguards(1005-914-4572) $21.95 (pair)• Injection molded of black polymer

composite – internal aluminum heatshields included

• Can only be used with the Round Handguard Cap

Round Handguard

Cap

Traingular Handguard

Cap

M4 Handguard Cap for use with M203

Vented Free-Float Tube Forend (VAR-01K) $95.95 • Vented, free-floating, three piece forend can be

easily installed for improved accuracy on your rifle • A new barrel nut and locking ring replace your existing

barrel nut (front sight, gas tube and barrel nut removal is required)

• Aluminum free-float tube screws on, and after “timing” the cooling vents, a locking ring holds it in position

• The center of the tube is knurled for a non-slip grip, and a standard stud is included for bipod or sling

• High quality aircraft aluminum - black anodize finished

Carbon 15 Conversion Kit Upgrade P21/P97 Pistols to P21S (AZ15921S) $159.95• Comes with all parts necessary to convert older pistols

to new “handguard style” • Includes Anodized Aluminum Rail with Dual Aperture

Rear and Blade Front Sights, Carbon 15 Fore-end, Hand-guard Retainers, Gas Block, Sling Studs and screws, Nuts and Pins

• Due to necessary machining/tapping, this kit requires factory installation

Oval P21S Handguard Kit (AZ15921) $69.95• Includes Oval Carbon 15 Handguard, Handguard

Retainers, Gas Block, Screws and O-rings• Factory installation required


Hogue Free-Floater Carbine and Rifle Forends • A unique aluminum forend with a central rubberized

band for ergonomic comfort and insulation against barrel heat and vibration

• Installation requires removal of the front sight and barrel nut• This two-piece forend will fit our dissipator models

Sold as a set with the Hogue Overmolded Rubber Pistol Grip, or pieces priced individually:

Rifle Forend Only. . . . . . . . . . . . . . . . . . . . . . . . . . .(15002) $79.952 Piece Rifle Set . . . . . . . . . . . . . . . . . . . . . . . . . .(15003) $106.95Carbine Forend Only (Includes a specially bent Gas Tube) . . . . . . . . . . .(15004) $79.952 Piece Carbine Set . . . . . . . . . . . . . . . . . . . . . . .(15013) $106.95Pistol Grip Only . . . . . . . . . . . . . . . . . . . . . . . . . . . .(15000) $31.95

Hogue Grip

M4 Dual Heatshield Handguards(1005-914-4574) $45.50 (pair) • Dual heatshields effectively increase barrel cooling,

especially in rapid fire• Originally designed for use on full-auto machine guns,

this improved handguard set will fit most carbines with either type of round handguard cap

• Molded of black thermoplastic composite material with heavy dual aluminum shields (one finished black / one silver)

Also available:M4 Single Heatshield Handguards(1005-914-4573) $42.50 (pair)

Bushmaster DCM “Free-Floater” Kit – a Barrel Nut / Free-Floater Tube / Handguard Combination (9349059CGA) $159.95• Meets all regulations for DCM Competition, and free

floats the barrel from Barrel Nut forward for optimum accuracy

• A Sling Swivel Loop is mounted onto the front of the tube • Handguards, Delta Ring, Weld Spring, Snap Ring and a

Special Gas Tube are included

DCM Free-Floater Tube / Custom Gas Tube Set(2698823) $132.95• Add your own rifle length handguards to this Competition

free-float tube • Includes a custom bent gas tube• Minor modifications to handguards are required for fitting• Upper Receiver disassembly and Front Sight removal are

necessary for assembly onto rifle

R15/M16 Handguard Tool (HGD-Tool) $21.95 • Provides the leverage

needed to compress the weld spring inside the delta ring

• Manufactured from strong, powder coated, 1/4" round steel stock with protective vinyl coatings

Bushmaster V Match “Free-Floater” Tubular Aluminum Forends• Hard anodize finished aluminum assemblies fit over

standard and match profile barrels “free-floating” them from Receiver forward for optimum accuracy

• Screwed directly onto the Upper Receiver in place of existing Handguards, Barrel Nut and Handguard Cap

• Installation requires removal of the front sight base

For Rifles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (SGW-02B) $63.95For Carbines . . . . . . . . . . . . . . . . . . . . . . . . . . . (SGW-01B) $63.95

Daniel Defense Omega Rail (DD-OMEGA7) $289.00 • Free Floating Barrel Design• Light Weight• User Installed with no Special Tools• ZERO Modification to Host Weapon• Uninterrupted Upper Rail Platform• Integral QD Sling Swivel Mounts With Limited

Rotation Feature• Aircraft Grade Aluminum• Military Specification Type III Hard Coat Anodized Finish• Military Specification Fasteners• Military Specification 1913 Picatinny Rails• Will fit our gas piston conversion kitg p

37

36

Orde

rs 2

4 Hr

s: 1

.800

.998

.792

8w

ww.

bush

mas

ter.c

om

BUSH

MAS

TER

SCH

EMAT

IC P

ARTS

POS

TER

(Col

or p

rint

ed o

n 80#

glo

ssy

stoc

k pa

per)

14.5

" Bar

rele

d M

4A3

Type

Car

bine

(sho

wn)

...

....

....

....

...(

QP-

010B

) $4.

9520

" Bar

rele

d A2

Sem

i-Aut

omat

ic R

ifle

....

....

....

....

....

....

(QP-

010) $

4.95

Part

s Re

fere

nce

Sche

mat

ic

MagazineFollower 8448672

MagazineBox Assy.

Magazine Spring 8448671

Magazine FloorPlate 8448673

Safety Detent Spring8448516

Safety Detent8448631

NOTE: Pre-Ban 30 Round Magazine shownhere for disassembly purposes.Post-Ban 10 Round Magazines can notbe disassembled without causing damage.Rebuild Kits for 20 & 30 Rd. Magazines are available.They include all parts shown here except box.

Made with Pride in the U.S.A.

LOWER RECEIVER, PISTOL GRIP,BUTTSTOCK and MAGAZINECOMPONENTS IN THISDISASSEMBLY GROUP®

Buffer Assembly 1005-914-4578

Car. Buffer Spring 1005-914-4564

Pin, ButtstockSlide Lock

1005-914-3229

Lockpin Spring1005-916-9178

Telestock Latch1005-087-8987P

6 Position Carbine Receiver Extension - 1005-914-2929-6

ReceiverExtension

Nut5310-917-1154

Collar,Buttstock Tube Lock

1005-914-2942

Lockpin Nut5310-917-1215

Roll Pin MS16562-106

TelescopingButtstockAssembly

1005-087-8988-PK

M4A3 CARBINE5.56MM / .223 REM.Part # BCWA3F 14M4 IZ

NOTE: THIS RIFLE IS ALSO

AVAILABLE WITH THE FIXED A2 HANDLE TYPE UPPER

RECEIVER

BARREL, HANDGUARD and FRONT SIGHT COMPONENTS IN THIS DISASSEMBLY GROUP

Hand GuardSnap Ring

MS16626-1137

Weld Spring 8448555

Delta Ring 8448712

Barrel Indexing Pin 9349054BIP

Barrel Extension 9349054BE

Barrel Nut 9349054BN

Thermoset Handguard(2) 1005-914-4572

Thermoset Handguard(2) 1005-914-4572

Front Sight Post 9349056

Front Sight Detent Spring 8448574

Front Sight Detent 8448573

Front Sling Swivel 8448571

Front Sling Swivel Rivet 8448697

Barrel Subassembly - A BBL-14M4Crush Washer 12991533B

Handguard Cap SGW-10F-M

Gas Tube Roll Pin Ms16562-106

Front Sight Base With Bayonet Lug 9349054FSHA

Carbine Gas Tube 1005-914-3504

Front SightTaper Pins (2)9349054BTP

M4 Barrel - Diameter Reduced Here To Accommodate M203 Grenade Launcher

Izzy Flash Suppressor IZ-102660-FHWill be permanentlypinned/welded overon commercial barrels.

ChargingHandle

LatchRoll Pin

MS16562-96

Charging HandleLatch Spring 8448520

Charging HandleLatch 8448519

Charging Handle8448518

CHARGINGHANDLE ASSEMBLY

8448517

UPPER RECEIVER, BOLTAND BOLT CARRIER

ASSEMBLIES / COMPONENTS

BOLT ASSEMBLY8448509

Bolt Carrier Key Screw (2) 8448508

Bolt Carrier Key 8448506

BOLT CARRIERASSEMBLY 8448501

Firing Pin Retaining Pin 8448504

Cam Pin 8448502

Firing Pin 8448503-S

Bolt Carrier 8448507-S

Bolt Gas Rings (3) 8448511kBolt 8448510

Extractor Spring 8448755SPExtractor Spring Insert 8448754

Extractor 8448512

Extractor Pin 8448513

Ejector Roll Pin MS16562-98

EjectorSpring 8448516

Ejector8448515Forward Assist

Spring PinMS16562-121

Ejection Port Cover Spring8448532

Ejection Port Cover8448525

Ejection PortCover Pin 8448533

Ring,Retaining Cover MS16632-1012

CARRYHANDLE

ASSEMBLY9349063-9

UpperReceiver8448524-V

Forward AssistSpring 8448540

Pawl Detent 8448544

Forward AssistPawl 8448543

Pawl Spring 8448542

PawlSpring Pin

MS16562-103

Forward AssistPlunger9349085

FORWARD ASSISTASSEMBLY 9349086KIT

REAR SIGHTASSEMBLY9349072-1

BallBearing MS19060-4808Index Spring 9349063-8

Index Screw 9349065

Index, Elevation9349066-1

Knob, Elevation9349067-1

Elevation Spring9349070

Cross Bolt9349063-4 (2 Places)

Thumb Nut Assembly9349063-7 (2 Places)

Carry Handle - Forged9349063-2

Clamping Bar9349063-3

Rear Sight ElevationSpring Pin

Ms16562-121

Rear Sight Helical Spring 9349069

Rear Sight Windage Screw9349076

Rear Sight Base 9349074-1

Rear Sight Ball Bearing MS19060-4808

Rear Sight Aperture 9349075

Rear SightWindageKnob Pin

MS16562-98

Rear SightWindageKnob9349077

Rear Sight Flat Spring 8448536

Rear Sight Ball Bearing Ms19060-4808

Rear Sight Helical Spring 9349069

REAR SIGHTASSEMBLY/COMPONENTS

FIRE

SAFE

Hammer with J pin 8448612-SK

Hammer Spring 8448611

Safety Selector Lever 9381367-S

Bolt Catch 8448628

Bolt Catch Roll Pin MS16562-119

Bolt Catch Plunger 8448634

Magazine Catch 8448638

Bolt Catch Spring8448633

Buffer Retainer8448582

Buffer RetainerSpring 8448583

LowerReceiver9349102-S

Lock WasherMS35335-61

Pistol Grip ScrewAN501D416-18

Pistol Grip9349127

Hammer andTrigger Pins

8448609

MagazineCatch Button 8448636

Trigger Guard Pivot Roll PinMS16562-35

Trigger GuardAssembly8448587

Disconnector Spring 8448594

Disconnector 9349114-S

Trigger 8448592-S

Trigger Spring 8448593

Pivot Pin 8448621

Pivot Pin Spring 8448586

Pivot Pin Detent 8448585

MagazineCatch Spring 8448637

Takedown Pin8448584

Takedown Pin Detent 8448585

Takedown Pin Spring8448586

• Caliber: Chamberedfor NATO 5.56mm

Also accepts.223 Remington

• Mode of Fire:Semi-Automatic

• 30 Round Magazine

• 34.75" Length Overall

• 14.5" Barrel Length

• Button Rifling - 1 X 9"Right Hand Twist

• Weight w/o Mag. 6 Lbs.

UPPERRECEIVER &

BARRELASSEMBLY

BURA3B 14M4 IZ

38 Orders 24 Hrs: 1.800.998.7928


Rail Mount Switch Kit for Streamlight / SureFire Flashlight Pressure Switches (SCH-4366-KT) $12.95• 3 piece kit to mount Streamlight or Surefire switches

onto any Picatinny Rail without adhesives or velcro• Base snaps on the rail and

the insert encapsulates the switch pad – molded black Santoprene Thermoplastic

SureFire G2™ Nitrolon® Flashlight (G2-BK) $36.00 • A compact (palm size) high-intensity

incandescent flashlight for tactical, self-defense, and general use with a tough polymer body

• Its smooth, brilliant, pre-focused tactical-level beam has four times the light of a two D-cell flashlight – bright enough to temporarily blind and disorient an opponent

• Small size, light weight, and high output make it a perfect everyday carry light

• Rugged, lightweight, corrosion-proof Nitrolon polymer body (Black Part Number listed here – Olive Drab, Tan or Yellow flashlights available on special order)

• O-ring sealed, weatherproof • Tailcap switch: press for momentary-on,

twist for constant-on • Switch lockout prevents accidental activation

during transport or storage • Max Output: 65 lumens• Runtime: 60 minutes • Length: 4.90”/Weight: 4.1 Oz. • Battery: Two 123A Lithium

Command Arms Flashlight Grip Adapter (FBS-FGA) $69.99• Multi-tasking foregrip combines a flashlight

mount for 1" diam. lights, and vertical grip all in one – as well as including an accessory rail section that serves as a laser mounting point, and a battery or small parts storage compartment within the grip

• Thumb activated push button on the back of the grip operates the flashlight’s on/off switch and allows for signaling

• Removable side plates on the grip utilize a rubber surface to enable installation of a pressure switch underneath the side plate

• Fits all Picatinny Rails, clamps on with thumbnuts for a “no tools” installation, and has Command Arms’ Lifetime Warranty

SureFire M79 Flashlight Mount (M79) $38.00 • A sturdy aluminum and polymer mount that will

clamp any 1” diam. flashlight to any rifle or carbine equipped with a Picatinny accessory rail

• Flashlights are held with an adjustable cam-type locking clamp

SureFire Scout Light M600B (M600B) $310.00 • Two-battery Scout Light from SureFire clamps

to any Picatinny rail by means of a knurled thumb screw on its rigid M75 rail mount

• Powerful LU60A incandescent lamp module produces 65 lumens of light

• A momentary-on remote tape switch is included as well as a tail cap on/off switch

• Two SureFire Lithium SF123A 3.0 Volt Batteries (10-yr. shelf life)

• Output/Runtime – Max.Output of 65 lumens with a 60 minute runtime

• Click on/off and momentary switch

• MilSpec Type III hard-anodized aluminum body

SureFire M910A-WH Vertical Foregrip Weaponlight (M910A-WH) $543.00

The SureFire Millennium M910A Vertical Foregrip Weap-

onLight attaches to Picatinny rail interface-equipped

weapons via a built-in dual thumbscrew mount. Each unit

is equipped with five separate switches: (1) two pressure-

sensitive momentary activation pads to control the main

battle light – one on each side of the grip for ambidex-

trous operation (2) a constant-on switch (3) a system dis-

able switch to lock the light in the OFF position for covert

operations or to eliminate accidental light activation

during storage, and (4) a third, smaller momentary switch

to control two low-output LEDs that are useful whenever

there is a need for a very small amount of light (stealth

navigation, night-time breaching operations, etc.)

• Batteries – Three SureFire Lithium SF123 3.0 Volt (10 year shelf life)

• Lamp Assembly/Runtime – SureFire MN10 Xenon/Halogen gas-filled lamp assembly with 125 lumens output for 60 minutes

• Constructed of Nitrolon® (a non-conductive, impact-resistant, aramid glass-filled polymer)

• Pyrex® lens window • Shock-isolated aluminum bezel with hard-anodized finish • Secondary, white LED navigation lights with separate

switching • Flawless white beam, always in focus • Light output bright enough to temporarily blind

an opponent


Gunsmithing Accessories

Gunsmithing Tools & SuppliesOur company policy is to offer Gunsmithing Assembly at No Charge when parts are purchased from us (with the exception of sight bases). We will also offer our professional gunsmithing services to any customers who care to ship us their AR15 Type firearms or assemblies for repair or buildup – and we will work on brands other than Bushmaster. Gunsmithing time is charged at $40.00 per hour, and we charge a flat $16.50 fee for return shipping of your rifle, upper or parts. For an estimate on your gunsmithing needs, call 1-800-998-7928 during business hours, or E-mail a complete description of your needs to: [email protected]

5.56mm NATO Caliber Go-Gauge• Used to determine

adequate headspace

• Chamber depth enough or oversized bolt

$30.00 (HGO223G)

5.56mm NATO Caliber No-Go Gauge• Used to determine excess headspace

• Chamber depth too great, or undersized bolt

$30.00 (HGO223N)

5.56mm NATO Caliber Field Gauge• Used to determine overly excessive headspace

due to chamber and bolt wear

$30.00 (HGO223F)

.308 Cal. Go-Gauge . . . . . . . . . . . . . . . . . . . . . (HGO243G) $30.00

.308 Cal. No-Go Gauge . . . . . . . . . . . . . . . . . . (HGO243N) $30.00

.308 Cal. Field Gauge . . . . . . . . . . . . . . . . . . . . (HGO243F) $30.00

Deluxe Armorer’s Tool Kit• A complete tool kit for all necessary repairs and instal-

lations (choose from A1 or A2 version – tools differ)

• Kit includes: Dual Slot Barrel Vise Jaw Blocks; Drift Punches; Armorers Barrel Wrench; 200 Page Technical Manual; Sight Tool; Cleaning Kit; Tele-Stock Wrench; Go; No-Go and Field Headspace Gauges; Firing Pin Protrusion Gauge; Receiver Push Pin Tool; Spring Package with Standard Buffer Spring; and Assorted Pins and Caps

$180.95 (Part #s A1 DARM KIT / A2 DARM KIT)

Bushmaster Standard Armorer’s Tool Kit• Kit includes: Dual Slot Barrel Vise Jaw Blocks; Drift

Punches; Barrel Wrench; Receiver Push Pin Tool; Technical Service Manual; Sight Tool; Cleaning Kit; Spring Package w/Standard Buffer Spring;and Assorted Pins and Caps

$85.95 (Part #s A1 ARM KIT / A2 ARM KIT)

Master Armorer’s Tool Kit• Kit Includes: Armorers Action Block Kit; Lower Receiver

Vise Block; Heavy Duty Combination Armorer’s Wrench; Barrel Vise Jaw Blocks; Drift Punch Set; Rifle Cleaning Kit; .223 Go/No-Go/Field Headspace Gauges; Firing Pin Protrusion Gauge; A1 and A2 Sight Tools; Receiver Push Pin Tool; 200 page M16 A2 Marine Corp. Technical Manual; M16 A1 Technical Manual; Armorer's DVD; Tetra Gun Care Kit; 2 complete spring packages (with carbine & rifle buffer springs), and an assortment of pins, detents and caps for fast and foolproof assemblies and installations

$319.95 (Part #s A MARM KIT)

Barrel Vise Jaw Blocks• Dual slot design for the

installation of barrels, front sight removal rear sight work, cleaning, or any job that requires immobilization

• Not limited to AR15/M16 servicework

$15.95 (AMER-001)

Receiver Push Pin Tool• Designed to push out tough Takedown and

Pivot Pins in your lower receiver. Machined from black nylon material so it won’t mar the gun’s finish

• Fits into the buttstock storage compartment

$7.50 (IMP-1)

U. S. Gov’t. Tech Manuals• Complete Maintenance, Repair

and Troubleshooting Information for either the A1 or A2 model

For M16A2 $11.95 (TM9-1005-319-23P)For M16A1 $11.95 (TM9-1005-249-24P)

Drift Punch Set• Set of four excellent Starret

Punches – 1/16"; 3/32"; 1/8"; 5/32"

$22.95 (STA PNCHSET)

The Bushmaster DVD• Complete assembly and

buildup details for the XM15/AR15/M16 rifle

$25.95 (ADS-002)

The Bushmaster Video (VHS)$21.95 (ADS-001)

Also available – Headspace Gauges for .50 BMG Caliber. Call for pricing.

h Takedown and

40 Orders 24 Hrs: 1.800.998.7928

Firing Pin Protrusion Gauge• Checks firing pins for minimum (.028") and

maximum (.036") protrusion

• Weight: 1.125 lbs. / Length: 12.25"

$15.95 (MMT-0005)

Heavy Duty Combination AR-15 Armorer’s Wrench• Two-sided wrench at one end fits either multi-point or

peg style barrel nuts on barrels up to 1" in diameter, and a breaker bar or torque wrench can fitted into the 1/2" square drive opening

• Other end fits Telestock Locking Nuts, and a large flat screwdriver blade is also included for use on standard buttstock screws

• Two other slots fit A1 and A2 birdcage flash hiders and receiver extensions

$22.50 (1570)

AR-15 Combination Armorer’s Wrench for Newer TeleStocks• A newer design Armorer’s Wrench that fits the latest

model telestocks with the cuts on the locking ring

• Weight 1.125 lbs – 12.25" overall

$23.50 (1570-4)

Field Bolt Carrier Carbon Scraper• Tool steel scraper quickly removes carbon buildup

in all AR15/M16 bolt carriers

$20.95 (BC01)

TeleStock Wrench for new style (ribbed) TeleStocks• An economical tool for the locking nuts on newer

type telestocks (fixed and collapsible)

$6.50 (223-telewrench2)

Sight Adjustment Tools • Adjustment tools for A1 & A2

Front Sights, and A1 Rear Sight

• Machined steel with black oxide finish – designed to fit in the stow-grip or buttstock compartment

For A1 Rifles (Round Sight Post) . . . . . . . . . … (RAY-006) $8.50For A2 Rifles (Square Sight Post) . . . . . . . . . … (RAY-005) $8.50


AR15 Multi-Tool• Adjusts front sights

• Cleans bolt faces

• Includes non-mar disassembly punches for take down and lower receiver pins

• Emergency Phillips screwdriver or scraper

• Lanyard loop to tie it to your web gear or tool bag

$12.95 (BT-MCT)

NEW Gun Cleaning Pad• Perfect for Rifles, shotguns,

Muzzleloaders – protects your table and firearms from scratches and spilled cleaning fluids

• Bonded waterproof backing prevents any soak-thru

• Absorbent, felt-like fabric

• Keeps parts organized and in place

• Durable, stain resistant and long lasting

• Number One seller in the country

• Made in USA

$12.95 (10012)

Bushmaster Operating & Safety Manual• Field Stripping; Cleaning, Maintenance on all

Bushmaster XM15 and Carbon 15 Models – with Parts Diagrams, Safety Tips and Sight Zeroing

$2.95 (BFIMANA2OP)

Armorer’s Barrel Wrench• For AR15/M16 barrel removal and installation

• Note: Will not fit our DCM profile barrels

$11.95 (RM-001)

Bolt Carrier Carbon Scraper• A sturdy workbench tool for the AR15/M16 gunsmith

• Makes quick work of cleaning out carbon buildup inside the Bolt

• Weight: 1.25 lbs. / Length: 13"

$31.95 (MBC-02)

( )

ustment T

t

e

tment


Lower Receiver Vise Block• Clamp it in a vise, and it’s magazine shape locks

into the magazine well of any AR15/XM15/M16 lower receiver for assembly or maintenance work

• Machined from high density polyethylene. Use to mount Lower Receiver in either upright or inverted position

• Will not distort receiver or harm its finish. Also available, a larger version for the Bushmaster .308

$31.95 (OM-006)

$37.95 (OM-007) For Bushmaster .308

Bushmaster Armorer’s Action Clamp for all AR15/M16 type rifles• Works with all AR type rifles – even early A1’s and A3

“flat-top” Uppers with Carry Handle in place

• Used in conjunction with an Armorer’s Barrel Wrench, this clamp eliminates barrel vise jaw blocks for remov-ing or replacing barrel assemblies, and is necessary when installing tubular aluminum V Match handguards or competition free-floating tubes Also available, a larger Bushmaster .308 (Upper receiver is not included)

$41.50 (OM-003)

$53.95 (OM-004) For Bushmaster .308

Gunslick® .22 / .223 Cal. Cleaning Kit• These quality kits are offered in either .22 Caliber

or .30 - .32 Caliber versions

$15.95 (62008-223)

Gunslick® .308 Cal. Cleaning Kit$15.95 (62014-308)

Dewey .308 Cleaning Rod• A 36" long, one piece, .30 Cal. nylon coated rod

with Jag and Brush Adapter (12/28 male thread)

• Thick nylon coating protects the bore from scratches, and ball bearing handle allows the rod to spin as it tracks the rifling

$28.95 (DEWEY-30C-36)

Dewey .50 Caliber Two-Piece Cleaning Rod• 54” long, two piece rod perfect for the new

Bushmaster BA50 .50 BMG Cal. rifle

• 44" of coated rod with 5/16 stainless steel extension

• Cleans everything from .35 Caliber and up. Supplied with 50-J Brass Jag and adapter to accept 8/32 brushes

$42.95 (DEWEY-50C54)

Dewey AR15/M16 Breech Rod Guide• Guides cleaning rod straight into the barrel from

breech end

• O-Rings seal off the chamber to prevent any back-flow of cleaning solvents and debris into the action, trigger and magazine areas

• For barrels 24" and longer, we recommend using a 36" rod with this rod guide (see Dewey Rod Dewey-22CM-36). Also available – Dewey .308 Breech Rod Guide

$23.95 (Dewey-1000)

Safety Block for AR-15/M16 Rifles and others• Molded plastic with the Bushmaster name• Cone end inserts into the firing chamber, handle

protrudes to indicate a safe firearm condition

$2.50 (SBBFI)

AR15/M16 Lower Receiver Safety Block• This bright yellow safety block

locks into the magazine well when the bolt is retracted and indicates a safe weapon

$7.50 (SB16)

Dewey Cleaning Rod Adaptor• A machined brass adaptor threaded (female 8-36 /

male 8-32) to accept the military type cleaning brushes – allowing them to be used with Dewey and other commercial cleaning rods

$3.25 (DEWEY-22-M-ADPT)

Dewey Coated Rods• Top quality one-piece rods featuring an unbreakable ball

bearing handle, and a nylon coating to protect rifling and preserve accuracy

• 8/32 female threaded to accept standard brishes or other manufacturer's accessories

• Universal brass patch loop includedDewey 22CF-24" (For barrels to 20") . . . . . . . (DEWEY-100) $27.95Dewey 22CF-30" (For barrels to 24") . . . . . . . (DEWEY-200) $27.95Dewey 22CF-36" (For barrels longer than 24")*. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (DEWEY-22CM-36) $28.95

*8/32 male threaded with an adapter. Use with a Breech Rod Guide in barrels 24" or longer.

ifles

r .308

s

ds

y-1000)

42 Orders 24 Hrs: 1.800.998.7928

Otis Tactical Cleaning System• 23 part weapons maintenance system cleans all rifles

.177 to 50 caliber, shotguns .410 to 10 gauge, and pistols .177 to 45 caliber

• Packed into a zippered, round, blacknylon soft-pak (4" by 2")

• Includes 5 brass bore brushes; 3 forged brass tips; 3 memory-flex rods;t-handle; shotgun adapter; all caliber patches and patch savers; 1/2 oz. bottle of bore solvent; NATO adaptor for mili-tary brushes and bore reflector/safety flag

$47.95 (750)

Hoppe’s BoreSnake … World’s Fastest Gun Bore Cleaner®

• Cleaning system for all .22 Caliber Centerfire and Rimfire rifles

$17.90 (24011)

Otis Technology Gun Cleaning CD• All the tips, techniques and

information needed to keep any rifle, pistol, shotgun or blackpowder piece in perfectly functioning, spotless condition – compiled in a handy MiniDisc CD format

• A full color printed brochure with highlights from the CD is included – both are packaged in a ziplock bag – “The Industry Guide to the Proper Care and Cleaning of Firearms”

$5.95 (2001)

Dewey Delrin Cleaning Rod Guides• Maintain the original accuracy of

your rifle by protecting the all important muzzle of the barrel

Models for: AR15/M16 Postban (.700" diam. at muzzle) (DEWEY-1100) $9.95AR15/M16 PreBan . . . . . . . . . . . . . . . . . . . . . .(DEWEY-300) $7.95M1 Garand . . . . . . . . . . . . . . . . . . . . . . . . . . . .(DEWEY-400) $7.95M14 & M1A . . . . . . . . . . . . . . . . . . . . . . . . . . (DEWEY-500) $7.95Mini 14 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(DEWEY-600) $7.95Mini 30 . . . . . . . . . . . . . . . . . .(DEWEY-700) Also fits Bullpup $7.95Ruger 10-22 . . . . . . . . . . . . . . . . . . . . . . . . . . (DEWEY-800) $7.95

The Otis .50 Cal. Cleaning System• Specifically designed for all your .50 caliber rifles and

pistols, and fits in a handy Cordura zippered pouch

• Includes two .50 caliber Memory-Flex Cleaning Rods: an 8" length for .50 caliber pistols, and a 40" for .50 caliber rifles, along with a large heavy weight brass obstruction remover and a slotted tip

• Weight: 0.735 lbs. / Dimensions: 4" x 4" x 2.5"

$51.66 (250)

Otis Buttstock Stowage Cleaning Kit• A 16 pc cleaning kit for the AR15/M16 packed in a

wedge shaped Cordura pouch shaped to fit inside the rifle’s buttstock storage compartment – lifetime guaranteed by Otis Technology

• Includes Bore and Chamber Brushes, Memory-Flex Rod, Double End Brush, Slotted Patch Tip, Patches, NATO Adapter, Bore Light, Chamber Rod, T-Handle, CLP Solvent, and more

$46.95 (224-2)


r

or for mili-ii

5.56mm /.223 Rem. Caliber Bore & Chamber Brushes• High quality tools for barrel cleaning

• 8-36 threads

Chamber Brush . . . . . . . . . . . . . . . . . . . . . . . . . . . (BR-001) $2.00 Bore Brush . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (A190) $1.65


NEW .50 BMG Cal. Cleaning GearBore Brush . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (B-50) $1.95Chamber Brush . . . . . . . . . . . . . . . . . . . . . . . . . . . . (SB-12) $1.95Chamber Rod . . . . . . . . . . . . . . . . . . . . . .(DEWEY-CHR-50) $19.95Chamber Brush Adapter . . . . . . . . . . . . . . . . . (DEWEY-SBA) $2.95

KleenBore Bore Brushes• Top quality materials all threaded 8-32 for

commercially available rods

6.8mm /.270 Caliber Bore Brush… . . . . . . . . . . . . .(A-179) $1.657.62mm /.30 Caliber Bore Brush… . . . . . . . . . . . . (A-180) $1.659mm /.38 Caliber Bore Brush… . . . . . . . . . . . . . . . . (A-181) $1.65.44 /.45 Caliber Bore Brush… . . . . . . . . . . . . . . . . . (A-182) $1.65

NEW Rem Oil 2oz Bottle• Proven superior for cleaning,

lubricating and corrosion-protecting fine firearms

• Ideal for all outdoor sports and marine equipment

$1.94 (10013)

Gov’t. Issue M16 Cleaning Kit• Kit includes a T-Handle; a

four piece rod; swab holder; bore and chamber brushes• Will fit in the standard buttstock

compartment of the AR15, XM15 or M16 rifle • All threading is Military 8-36 Threading

$10.50 (A CLEAN)

The Bushmaster Gun Pad• Sturdy counter-top protector for gunsmithing assembly

work and it doubles as a computer mouse pad

• This big (18" x 12") brightly colored pad has crisp images of Bushmaster rifles, a protective laminate surface, and soft, non-skid, foam padded backing

$9.95 (QP-014)

AR15/M16 Handguard Tool• Provides the leverage needed to compress the weld

spring inside the delta ring, and eliminates the need for a second pair of hands to help remove AR15/M16 two-piece handguards

• Works well on both straight and tapered delta rings

$21.95 (HGD-Tool)

Cleaning Kit Case• New Gov’t. Issue nylon cases with snaps

and velcro closures

• Great for holding all sorts of small parts and gear

• Available in Olive Drab (PO3030D) or Black

$8.95 each (PO303B)

Bushmaster Cleaning Kit COMBO• The 7 Piece Gov’t. Issue Cleaning Kit packed in a nylon

Cleaning Case Kit

Cleaning Kit in Black Case . . . . . . . . . . . . . . … (cleankitB) $16.95Cleaning Kit in Olive Drab Case… . . . . . . . . . (cleankitOD) $16.95

Birchwood Casey Super Black Touch-Up Pens• Touch-up nicks and scratches on black anodized alumi-

num, and polished or matte finished alloy gun receiv-ers, trigger guards, scopes or black painted surfaces – a fast drying, lead-free paint -with superior adhesion and durability for gunsmithing uses

• The felt tip chisel point touch-up pen holds 1/3 fl. oz.

For Gloss Black Finish . . . . . . . . . . . . . . . . . . (Gloss-15101) $6.95For Flat Black Finish . . . . . . . . . . . . . . . . . . . . . . . . (15102) $6.95

44 Orders 24 Hrs: 1.800.998.7928


The Tetra Gun Cleaning Pack A superior firearms maintenance and preservation system based on a revolutionary breakthrough in synthetic polymer technology.

Tetra’s Gun Cleaning Pack Contains:• 1 oz. Tetra Gun Lubricant: A synthetic, polymer

based lubricant and conditioner for action and all moving parts

• 1 oz. Tetra Gun Grease: Synthetic polymer based white grease for use on all metal to metal contact surfaces

• 3.75 oz. Tetra Gun Spray: Synthetic polymer based cleaner and light lubricant – removes dirt, combustion residue, old lubricants and solvents, and offers corrosion protection

• 4 oz. Tetra Copper Solvent: Concentrated copper, lead, powder, and plastic remover. Removes stubborn fouling from barrels and provides fast, effective cleaning without "barrel etching"

$23.50 (5337100802)

Tetra Gun Grease1 oz. Tube . . . . . . . . . . . . . . . . . . . . . . . . . . . . (5337100005) $5.50

Tetra Gun Oil1 oz. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (5337100006) $4.504 oz. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (5337100303) $7.958 oz. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (5337100304) $12.95

Tetra Gun Spray Cleaner3.75 oz. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (5337100201) $7.508 oz. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (5337100202) $11.95

Tetra Field Kit• All the necessities to keep your gun functioning

on the range or in the field

• Includes: 1 oz. tube Tetra Gun Grease and 1 oz. plastic bottle Tetra Gun Oil

$7.95 (TETRAFIELDKIT)

Tetra Gunsmith's Kit• Professional size quantities of high quality Tetra

products: 2 - 1 oz. tubes of Tetra Gun Grease / 8 oz. Tetra Gun Oil / 8 oz. Tetra Gun Spray

$31.95 (TETRAKIT)

Tetra Gun Blue & Rust Remover• Removes old bluing

and rust quickly and effectively without damage to base metal – a necessity before re-blueing or browning. 3 fl. oz.

$5.50 (5337100001)

Tetra Gun Liquid Gun Blue• A great product for touch-up or complete re-blueing

of firearms (not for aluminum, steel only)

$5.50 (5337100002)

Tetra Gun Copper Solvent$8.50 (5337100501)

Cleaning Patches• Bag of 100

• Sized for the AR15/M16 rifle bore

$5.50 (923)

Firepower FP-10 “CLP” Type Lubricant• A Cleaner, Lubricant, and Preservative

for Weapons & Weapons Systems, Firepower FP-10 is a semi-synthetic CLP specifically formulated for the serious Shooter, Soldier, Law Enforcement Officer, Sportsman and Professional Armorer

1 oz. Bottle… . . . . .(FP-10-1) $4.254 oz. Bottle… . . . . .(FP-10-4) $6.5016 oz. Bottle… . .(FP-10-16) $14.95

ervativeems,theticthe

an


Competition Rifle Parts can be fitted to standard models as well.

Bushmaster DCM 1/4 Minute Windage Competition Rear Sight Conversion Kit• Convert your old A2 sight to 1/4 Minute of

Windage Adjustment configuration with these high quality competition parts

• Kit includes 1/4 M.o.A. Drum, Pin, Detent Springs and Balls

$21.50 (AR 1/4MIN CONVK)

DCM Competition Lower Receiver AssembliesAll Include our factory set DCM Two-Stage Competition Trigger

Complete DCM Competition Lower Assembly• Lower Receiver with A2 Buttstock, Competition

Buttstock Weight, Pistol Grip and Two Stage Trigger as shown

$430.00 (A LOW STD W/CGWT) M.S.R.P.

DCM Lower Assembly• Same assembly as above less Buttstock Weight

$410.00 (A LOW STD W/CG) M.S.R.P.

DCM Lower Receiver Assembly minus Buttstock• Includes Pistol Grip,

DCM Two Stage Trigger and all internal parts – as shown at left

$360.00 (ALOW W/OSTK W/CG) M.S.R.P.

Bushmaster DCM Competition Heavy Barrel with Factory Matched Bolt and Front Sight Base• A lapped 20" Barrel – button rifled in 1 x 8 Right Hand

Twist – features an 11° crowned muzzle designed for competition, and a custom match hybrid chamber-ing with longer throat, or “Leade” to accommodate 5.56mm ammunition

• Chrome Moly Vanadium Steel (non chrome-lined) with a Manganese Phosphate finish

• Diameter from the barrel extension forward to the sight base step is a full 1". NOTE: Requires assembly by an experienced Gunsmith to achieve optimal accuracy.

$313.95 (9349054-20CGA)

Bushmaster Two Stage Competition Trigger• Includes all the specially modified parts shown plus

• Can be set for a 3 1/2 lb. DCM legal 1st Stage and a 1 lb. (2nd Stage) letoff. NOTE: This Trigger will not fit in Colt Lowers with a “Block” over the Safety, and is not designed to work with large Colt pivot pins

$127.95 (8448592-SCGK)

Also Available… Two Stage Competition Trigger with Bushmaster mbidextrous Safety$148.95 (8448592-SCGKA)

DCM Competition A2 Upper Receiver Assembly with “Stay Straight” A2 Competition Rear Sight• Includes Forward Assist, Ejection Port Cover and One

Competition Sight Micro-Aperture in your choice of four “peep” sizes – please specify size

DCM Upper Receiver Assembly with 1/2 Minute Rear Sight . . . . . . . . . . . (A2URCG2XR) $223.95DCM Upper Receiver Assembly with 1/4 Minute Rear Sight . . . . . . . . . . . (A2URCG4XR) $223.95

Bushmaster Competition “Stay Straight” A2 Rear Sight Assembly• Highly accurate Rear Sight Assemblies with the

new “Stay-Straight” dual detent mechanism (keeps the sight from moving or canting) for the serious competition shooter

• Elevation and windage mechanisms are available in either 1/2 or 1/4 Minute of Adjustment

• The flip-up is machined to allow installation of different interchangeable

• Micro-Apertures (one aperture included with each complete sight or flip-up assembly)

• These precision machined inserts are available in 4 aperture sizes: .036" / .040" Standard (9 out of 10 shooters find the .040" standard aperture works best, your eyes may differ) / .046" or .052"

1/2 M.o.A. Rear Sight with choice of aperture size . . . . . . . . (9349072CGA2XR) $122.501/4 M.o.A. Rear Sight with choice of aperture size . . . . . . . . (9349072CGA4XR) $122.50

Competition Rifle Parts

DCM Lower

ion ster

y with etition R

052

M.S.R.P.

Lower Receivers available only through FFL dealers.

46 Orders 24 Hrs: 1.800.998.7928

Moly-Slide™ Lubricating Paste• A 60% Molybdenum Disulfide (MoS2) lubricating paste

for wear resistance, anti-seizing and anti-galling on cams, bushings, and other sliding surfaces

• Has a very wide working temperature range with minimal evaporative loss

• The 1 oz. jar will usually last the average shooter/gunsmith for years

$8.50 (MS-100)

Bushmaster DCM Competition Upper Receiver/Barrel Assembly• For the serious High Power Competitor – this

Upper Assembly includes all the competition modifications needed to win

• Redesigned “Stay-Straight” Dual Detent Rear Sight with Competition Hood

• Assembly includes the matching Bolt and Bolt Carrier

$790.00 (PURA2B 20CG8XR)

AR15 Bolt Release Extention• A finely machined aluminum lever

to help High Power Competitors get back on target faster by keep-ing the forearm hand in place

$47.95 (SSP-1)

Competition Handguard Balance Weight• This lead balancing weight fits inside the bottom

half of the standard A2 handguard to add forend weight to your competition rifle (a companion to the buttstock weight below)

• Weighs approx. 3.5 lbs.,and can be cut down to achieve perfect balance

$31.95 (GPSS-HBW)

A2 Buttstock Balance Weight• Fits snugly in the standard A2

buttstock compartment without rattle – a 3.62 lb. chunk of lead that can be trimmed to help achieve a perfectly balanced rifle

• Its wedge shape and rubber pressure pad ensure a tight, rattle-free fit

$21.50 (Part # 9349119SW)

Bushmaster Competition Sight Service Tool • A combination Front Sight Adjustment Tool

and Rear Shroud Insert “Screwdriver” machined of steel with black finish, and knurled for a non-slip grip

• Length – 2"

$10.95 (CG-MPT)

DCM Free-Floater Tube / Custom Gas Tube Set• Add your own rifle length handguards to this Competition

free-float tube – includes a custom bent gas tube• Minor modifications to handguards are required for fitting• Upper Receiver disassembly and Front Sight removal

are necessary for assembly onto rifle• As installed on DCM Rifle

$132.95 (2698823)

“The Hood Kit”• Includes our Competition Flip-up; the Hood Sight Shroud

and your choice of one Competition Aperture numbers below indicate the size of the aperture opening

• Choose from: .036" (CGF36HK) / .040" (CGF40HK) .046" (CGF46HK) / .052" (CGF52HK)

$40.50

“The Hood”• A Competition Rear Sight Shroud,

(center in photo) this tubular, threaded insert for our competition flip-up eliminates all glare and improves your sight picture

• Internally threaded to accept the micro-aperture of your choice

$15.95 (9349075CGH)

Extra Competition Sight Apertures*• These thread directly into the flip-up in your

Competition Sight• Your vision determines which Micro-Aperture suits you

best (most shooters prefer the .040" standard aperture)• Choose from: .036" (CGI36) / .040" Std. (CGI40) /

.046" (CGI46) / .052" (CGI52).

$10.95 ea.*Any Three Apertures can be purchased as a set . . . . . . . $25.95

Bushmaster DCM “Free-Floater” Kit – a Barrel Nut / Free-Floater Tube / Handguard Combination• This forend system meets all regulations for DCM

Competition, and free floats the barrel from Barrel Nut forward for optimum accuracy

• A Sling Swivel Loop is mounted onto the front of the tube – Handguards, Delta Ring, Weld Spring, Snap Ring and a Special Gas Tube are included

$159.95 (9349059CGA)


nce

nce Weightndard A2

n Rear Sight Shroud,oto) this tubular,

t Sight Adjustment Toolsert “Screwdriver”

with blackfor a

s


Short Competition Hood• This variation on the Competition Rear Sight Shroud

above was created to allow shooters who wear glasses to get as close as = possible to the rear sight without scratching their glasses

$15.95 (9349075CGH-S)

A2 Competition “Flip” Sight• Shipped with One Micro-Aperture• Choose from these 4 Aperture sizes:

.036" (CGF36) / .040" (CGF40) /

.046" (CGF46) / .052" (CGF52)

$26.50

UVEX Sharp-Shooter Safety Eyewear – Includes Free Earplugs• These tough, sporty, and lightweight Uvex Shooting

Glasses protect both your eyes and your ears

• Polycarbonate uni-lens blocks 99.9% of harmful ultraviolet radiation from the sun, and is “Ultradura” hardcoated to guard against abrasion and scratching

• They're tough enough to meet ANSI Z87.1-1989 and OSHA guidelines, and their wrap-around design provides excellent peripheral vision

• Black poly-carbonate frames feature adjustments for temple length and tilt for a custom fit

• Each pair of Uvex glasses includes Shooters Earplugs warranted to reduce noise by 30 decibels (ANSI test S3.19-1974)

• Three different lens colors available: clear; amber, and espresso

• Great eye and ear protection at a great price

• UVEX Sharp-Shooter Safety Eyewear with Free Earplugs included

Espresso Lens $12.95 (R-03513)

Amber Lens $12.95 (R-03512)

Peltor President Hearing Protector• Peltor’s President model features exclusive liquid

foam ear cushions that are designed for all-day comfort and the padded stainless steel wire headband and generously sized earcups automatically self-align for perfect fit and protection

• The President offers a noise reduction rating of 24 decibels, and its earcups can be adjusted in height from the headband

• The headband will fold down around the earcups for compact storage

$24.95 (AOS97069)

Safety Block for AR15/M16 Rifles and Others• A plastic SafetyBlock with Bushmaster name molded in

– the cone end is inserted into firing chamber, and the “handle” end protrudes to show safe condition of rifle

• Bushmaster includes this Safety Block with every complete rifle sold

• 4 Piece Set

$2.50 (SBBFI)

Lower Receiver Safety Block with Flag• Similar to the safety block above, this

improved model adds a safety flag that shows out of the open ejection port

$8.50 (SB16F)

AR15/M16 Lower Receiver Safety Block• This bright yellow safety block locks into

the magazine well when the bolt is retracted and indicates a safe weapon

$7.50 (SB16)

Single-Shot Magazine Follower• A blue plastic follower that installs easily inside

most “AR” type .223/5.56mm magazines

• Allows single shot loading of extra long competition handloads that won’t function in regular magazines

• Magazine not included

$13.95 (SS-FOL)

Sinclair International Sight and Muzzle Cover Set• Often seen on the DCM ready line, these popular

protective covers are molded from durable bright yellow vinyl to protect “sight zero”

• To keep dirt out of the muzzle, and to offer high visibility

• Set includes Front and Rear Sight Covers and two sizes of Muzzle Guard Covers – one for rifles with flash suppressors and another for rifles with plain competition crowned muzzles

$14.95 (14-200)

Chamber Checker Safety Flag$2.50 (CC Chamber Check)

• Tough yellow plastic flag slips into the chamber

• Close the bolt, and it clearly shows your rifle’s range-safe status

r

ezes:

yction

show safe condition of rifleSafety Block with

Block with Fllaglag

nes

d

14-200)

Ch k S

48 Orders 24 Hrs: 1.800.998.7928


Turner Saddlery Leather Competition Sling• National Match Police Tactical

Rifle Sling is premium quality, black, 11 oz. strap leather – 54" in length with numbered holes

• Mil Spec Parkerized steel hardware and copper rivets

• Keepers are 7/8" wide and hand stitched

$74.50 (TS-NMPTRS)

Creedmoor Deluxe Service Rifle Shooting Stool• Custom sewn by Creedmoor for Bushmaster

of Red Cordura with Black webbing and the Bushmaster Snake Logo

• Carry all your “necessaries” in the handy hanging compartmentalized bag – accessible through half moon YKK zippered openings on both sides

• Carry up to four AR-15 Magazines in the outside pouches – protected from dirt and rain with a Velcro flap

• A zippered pocket above the magazine pouch accom-modates your score book, and large outside pockets on three other sides offer huge storage capacity

• Carrying Bag is 12.5" tall x 11" wide x 12.5" deep, and overall weight is only 6 lbs

$69.95 (BFI-N051)

Shooting Stool Shoulder Strap• A convenient, 1.5" wide

black polypropylene webbing shoulder carrying strap for the Creedmoor Shooting Stool

• Weight – 1 lb

$5.95 (BFI-N026)

Creedmoor Shooting Equipment Rain Cover• This cover was designed so the competitor can saddle

his rifle and gear on the Shooting Stool above for protec-tion against the nastiest weather, or potential tampering

• Black nylon pack cloth, it can be secured with its own strap around a shooting stool

• Weight – 2 lbs

$29.95 (BFI-N045)

Creedmoor Rifle Data Score Book• Essential data is arranged in a simple check off format

with enlarged target overlays (double overlays for 200 and 300 yard rapid fire stages)

• Ample pages for 200/300/600 and 1000 yard shooting – in a convenient 8.5" x 5.5" spiral bound format

$8.95 (BFI-N075)

Creedmoor Deluxe Cart Conversion Kit• A quality kit that attaches to the

Creedmoor Deluxe Shooting Stool above to add easy rolling portability and a compact size when folded down

• Machined from 3/8" bar stock aluminum, and the finest heavy duty hardware and wheels

• Folds down in seconds for car trunk stowage, or disassembles easily to fit in a standard suitcase as the longest piece is only 23"

$124.95 (BFI-Cartcon)

Creedmoor Bushmaster Roll-Up Shooting Mat• A popular – and necessary – part of High Power

Competition gear, is this Roll-Up Shooting Mat done in Bushmaster colors by Creedmoor Sports

• Features a waterproof vinyl bottom in Bushmaster Black, and Cordura nylon top in Bushmaster Red with our snake logo embroidered on for maximum visibility

• Oversize textured rubber elbow pads

• Mat rolls up for convenient storage and carry

• Dimensions are 29.5" wide x 68" long, and weight is approx. 8 lbs

$79.95 (BFI-N040)

Creedmoor Bushmaster Hard Back Heavy Cordura Shooting Coat• Creedmoor Sports’ most popular shooting jacket –

sewn in Bushmaster’s Red & Black colors of heavy Cordura material – ideal for High Power or Smallbore Competition Shooting

• A stiff interior center back panel of heavy cotton canvas give it the “hard-back” name, and provide maximum back support for the standing position

• Custom sewn to fit the individual shooter (male or female), and is available in sizes 34 thru 48 – for the right or left handed competitor

• To achieve an exact fit, Bushmaster Sales people will refer you to Creedmoor’s expert tailoring staff who will guide you through the fitting process

• Choose from standard or tapered cut, and you’ll have to provide exact measurements around your chest (under armpits) and around stomach (widest point)

• Specific alterations to achieve perfect sleeve and body length should be discussed with Creedmoor

$310.95 (BFI-N002) For Extra Large Sizes (50 - 52 - 54) Add $20.00

11"rall

ooting Stool

Stool andStool and bag not included.

ng process

taperedvide exactur chestnd

d

or


A1 Round Front Sight Post

(8448572) $3.95

• Original M16A1 round post

A1 Rear Sight Assembly

(A1 RSITE ASSY) $12.95

• The original M16A1 configuration – adjustable with A1 sight tool or bullet tip

A1 Sight Aperture . . . . . . . . . . . . . . . . . . . . . . . . . (8448539) $6.50A1 Windage Screw . . . . . . . . . . . . . . . . . . . . . . . . (8448534) $3.15A1 Windage Drum . . . . . . . . . . . . . . . . . . . . . . . . (8448535) $3.15Rear Sight Flat Blade Spring . . . . . . . . . . . . . . . . (8448536) $ .55A1 Windage Drum Detente . . . . . . . . . . . . . . . . . (8448537) $ .55A1 Windage Drum Roll Pin . . . . . . . . . . . . . . (MS16562-96) $ .55A1 Drum Detente Spring . . . . . . . . . . . . . . . . . . . . (8448538) $ .55

Williams Fire Sight for AR15/M16

• This front sight design incorporates a light gathering element (the tubular piece that mounts along front edge of the AR sight base) for low light situations

• The assembly is elevation adjustable, and all sight pieces are CNC machined of black finished aluminum

• No drilling or tapping is required for installation on your front sight base

$42.50 (9349054FSB-WFS)

Front Sight Replacement / Repair PartsFront Sight Detent… . . . . . . . . . . . . . . . . . . . . . . (8448573) $1.50Front Sight Detent Spring… . . . . . . . . . . . . . . . . . (8448574) $ .85Front Sight Taper Pin . . . . . . . . . . . . . . . . . . (9349054BTP) $1.00

Front Sight Replacement / Repair PartsRear Sight Elevation Index . . . . . . . . . . . . . . . . . .(9349066) $7.50Rear Sight Elevation Index Screw . . . . . . . . . . . (9349065) $1.00Rear Sight Elevation Knob . . . . . . . . . . . . . . . . . . (9349067) $6.50Rear Sight Elevation Spring . . . . . . . . . . . . . . . . (9349070) $2.25Rear Sight Elevation Spring Pin . . . . . . . . . . (MS16562-121) $ .55Rear Sight Helical Spring . . . . . . . . . . . . (9349069) $ .55 [3 req’d]Rear Sight Ball Bearing . . . . . . . .(MS19060-4808) $ .55 [3 req’d]Rear Sight Windage Knob . . . . . . . . . . . . . . . . . . (9349077) $6.50Rear Sight Windage Screw . . . . . . . . . . . . . . . . (9349076) $4.50Rear Sight Windage Knob Pin . . . . . . . . . . . . (MS16562-98) $ .55Rear Sight Flat Blade Spring . . . . . . . . . . . . . . . . (8448536) $ .55Rear Sight Flip-up Aperture . . . . . . . . . . . . . . . . . (9349075) $8.50Rear Sight Base . . . . . . . . . . . . . . . . . . . . . . . . (9349074) $23.50

Adjustment Knob for A1 Rear Sight• Knob converts the A1 rear sight to the latest

M16A1E1 configuration

• Phosphate finished steel knob is knurled for quick adjustment (no sight tool needed) and more precise half-click calibration

$9.95 (LMT-001K)

Complete A1 Rear Sight Assembly with our A1 Adjustment Knob• Includes Knob, A1 Sight Aperture, A1

Windage Screw, Flat Spring, Ball, Spring and Roll Pin

$14.95 (A1-RSIGHT-KIT)

1/2 M.O.A. Rear Sight Assembly for the A3 Removable Carry Handle $53.50 (AR A3 RSA)

Trijicon Luminous Tritium Front Sight Post

(CP-25F) $57.95

• AR type front sight post is functionally identical to the standard front sight post and fits either A1 or A2 models and includes Sight Tool

• Illumination from the Tritium inserts are guaranteed for 10 years by Trijicon

Trijicon Rear Sight Aperture• An effective ghost ring style flip-up aperture for the AR

• Houses two Tritium inserts in the larger aperture

$38.00 (CP-25R)

Trijicon Tritium Sight Set (CP-25) $89.95

• Both Front and Rear Sights as shown above, plus Front Sight Detent and A1/A2 Sight Adjustment Tool

Trijicon TA51 Mount for ACOG• Knurled thumbnuts allow

quick installation/removal on mil. spec

• Picatinny rail flat-tops

• The ACOG Scope mounts into this with two screws – use Loctite to keep it from “shooting loose”

$84.95 (TA51)

KNS Precision Front Sights• Quality replacement front sights for the AR15/M16

offering .010 diam. crosshair wires for a precise sight picture and hooding for reduced glare

• Tactical Model Dual Range sight (right) offers an adjust-able elevation dot for close range targets below the long range crosshairs

A. Standard Model . . . . . . . . . . . . . . . . . . . . . . . . . . (KNS1) $37.95B. Wide Hood Model . . . . . . . . . . . . . . . . . . . . . . . . . (KNS2) $37.95C. Tactical Model . . . . . . . . . . . . . . . . . . . . . . . . . . . (KNS3) $52.95

A2 Square Front Sight Post• Standard M16A2 steel square post design

$5.50 (9349056)

Sights/Scopes/Mounts

l on mil. spec

black

red

ry

t d d f t i ht t

A51)

A B C

e Front Sight Post

50 Orders 24 Hrs: 1.800.998.7928

A2 Front Sight Post for Flat-Top Colts• Colt A3 Removable Carry Handle Sights are

taller than A1& A2 Rear Sights, and require an .040” taller Front Sight Post

• Also for use with Swan Sleeves & ARMS #40 sight

$5.50 (9349056-M)

Aluminum Scope Mount• Anodized, machined aluminum,

“see-thru” Picatinny rail mount (Weaver also) which allows use of existing iron sights

• Attaches to the carry handle with a thumbnut

$21.95 (RAY-002)

NEW A.R.M.S. Folding Front Sights• Solves the problem of trying to fold the

well known triangle shape of the conventional non folding front sights

• Barrel mounted in place

• Utilizes a rugged spring loaded angled support system to eliminate getting caught up in brush and other combat hazards

• Also uses the standard front sight post

$147.50 (ARMS 41-B)$153.50 (ARMS 41-BL) Includes lug


gledcaughtrds

post

s

st

Aimpoint® CompM3 SightThe Aimpoint Comp3 Passive Red Dot Collimator Reflex Sight offers has capabilities not found in other sighting systems

Features include: • Compatibility with every generation of NVD

• ACET Technology allowing 50,000 hours of operation on one single battery (on setting 7 of 10 - Battery Type: 3 Volt Lithium battery included – type 2L76 or L1/3N)

• 500,000 hours of use on NVD setting

• Magnification 1X - Reticle Size: 2 MoA

• Unequalled light transmission

• Submersible to 45 meters (135 feet)

• Replaceable outer black rubber cover offering protection and an additional stealth factor

• Rugged, durable construction unaffected by extreme weather conditions

• Unlimited field of view, Unlimited eye relief, Parallax-free

• No laser emissions that could be harmful to your eyes

• Mechanical switch for speed and reliability

• Increased aiming confidence

• Reduced training time and ammunition

• Switch - Dot Brightness - 10 settings – 4 NVD, 6 Daylight

• Body: Extruded, high strength aluminum, hard anodized, with dark graphite gray non-glare finish

• Lens Covers of black, non-glare thermoplastic elastomer

• Adjustments: 1 click = 10 mm at 80 meters = 13 mm at 100 meters = 1⁄2" at 100 yds

• Length – 130 mm (5.1" ) Width/height – 55 mm x 55 mm (2.2" x 2.2") Weight – include lens covers and protective rubber shroud – 270 grams (9.5 oz)

$556.00 (11408)

ARMS #22M68 Ring Mount for Aimpoint® CompM3• A rugged ARMS Mount designed

with a wide clamping cradle for the CompM3

• It features a single ARMS quick throw lever locking system to guarantee repeat zero on any Picatinny Rail – solid, quick, easy to mount or remove

• The “no-mar”pad built into the throw lever protects the Picatinny rail’s edges and the mount’s two pieces can be separated for use with the Cantilever Spacer (at right) to match the CompM3 with the 3X Mag Module above

$138.00 (10950)

ARMS #22M68 Cantilever Extension• Designed to align the Aimpoint® CompM3 sight with the

3XMag Module when used with the ARMS #22M68 Ring Mount at right. Low std. height allows perfect Red Dot cowitnessing on M16/M4 models

• Machined steel with grey phosphate finish

(1137) $35.00

er sighting systems

Aimpoint® SRP-M Quick Detach Mount for Comp M3 Sight• A solid, simple 30mm wide-ring high mount with a

large knurled thumbnut for easy on / easy off attachment to any MIL-Std 1913 Picatinny Rail

• Optical center over the top of the Picatinny rail is 26.1mm (+/- 0.1 mm) – may require a riser block for sighting over a standard AR front sight

$29.00 (10830)

a


Aimpoint® TwistMount for 3x Magnifer• The recommended mount for the 3XMag is this

Aimpoint Twist Mount – allows for quick attachment and detachment

• Fits any MIL-Std 1913 Picatinny Rail

$164.00 (11355)

Spacer for Aimpoint® TwistMount• A companion piece to the TwistMount designed for

“co-witnessing” between 3X Magnifier and CompM3 on same plane rails

• It raises the 3XMag in the TwistMount to match the height of the CompM3

$11.00 (10566)

Aimpoint® 3XMag Magnifying Module• Compatible with the CompM3 Sight for maximum

flexibility in the field

• When combined with Aimpoint’s patented TwistMount the 3XMag offers the ability to jump from CQB (Close Quarters Battle) to semi-sniping and vice versa

• Hunters can rapidly switch from non-magnifying to magnifying while still being able to keep their Aimpoint sight on the firearm

• The versatile 3XMag can also be used as a handheld magnifying monocular for discrete observation and identification

Unique features include: • Mounts on rail system behind Aimpoint sights with

Aimpoint TwistMount, or a regular 30mm ring

• Provides extended range to the operator

• No influence on point of impact – No need for re-zeroing the sight

• Eye relief at 5° FOV 40 – 90 mm / at full FOV 60 – 65 mm

• Length – 110 mm (4.3") Width / Height – 44x41 mm (1.7" x 1.6") Weight – 200 g (7.1 oz)

• Body’s bottom surface has 4 screw holes for other mounting alternatives

• Body: Anodized aluminum, dark grey, rubber covered

$535.00 (11324)

LEUPOLD® Mark 4 4.5-14 X 50mm LR/T (Long Range/Tactical) M1 Scope• Leupold® Mark 4® Long Range/Tactical riflescopes are

some of the most dependable, highest performing riflescopes you’ll find anywhere

• The Leupold Index Matched Lens System® delivers unsurpassed sharpness across the visual field, brightness, and contrast for excellent target definition, even in low light

• Side focus parallax adjustment offers fast, easy parallax focusing from 75 yards to infinity – from any shooting position

• Finger-adjustable 1/4 M.o.A. windage and elevation adjustments are clearly defined with audible, tactile clicks

• Once sighted in, adjustment knobs can be zeroed

• The Leupold® Mark 4® LR/T® is available with either the Mil Dot, or Duplex® reticle

• The Mil Dot reticle provides accuracy of range estimation for hunters and target shooters

• 30mm maintube offers incredible strength and allows for the greater range of windage and elevation adjustment

• Flip-open lens covers are standard issue with each Mark 4 LR/T

• Weight is 22 oz. / Overall Length: 12.5" / FOV @ 100 yds. - 19'

LEUPOLD® Mark 4 4.5-14 X 50mm LR/T M1 Scope w. Duplex Reticle. . . . . . . . . . . . . . . . . . . . (54660) $1,219.99LEUPOLD® Mark 4 4.5-14 X 50mm LR/T M1 Scope w. Mil Dot Reticle . . . . . . . . . . . . . . . . . . . (54560) $1,374.99

qment

d CompM3s

g in thech theM3

52 Orders 24 Hrs: 1.800.998.7928


LEUPOLD® Mark 4 Fixed 16 Power Scope 16 X 40mm LR/T (Long Range/Tactical) M1 Riflescope with Mil Dot Reticle

• Incredibly rugged, absolutely waterproof

• The Multicoat 4® lens system delivers extreme clarity from edge to edge of the visual field, outstanding contrast, and a bright sight picture even in extreme low-light conditions

• Side focus parallax adjustment for fast, easy parallax focusing from 50 yards to infinity, from any shooting position

• Finger-adjustable ¼ M.o.A. windage and elevation adjustments with audible, tactile clicks

• Once sighted in adjustment knobs can be zeroed

• Available with the Mil Dot Reticle to provide accuracy of range estimation for hunters and target shooters

• The 30mm maintube offers incredible strength and allows for the greater range of windage and elevation adjustment (140 M.o.A. of elevation adjustment and 45 M.o.A. of windage adjustment)

• Flip-open lens covers are standard issue with each Mark 4® LR/T Riflescope

• Rugged and absolutely waterproof, these LR/T riflescopes helped to set the Leupold Mark 4 standards, and can withstand incredible abuse

• Weight is 22.5 oz. / Overall Length: 13.1" / FOV @ 100 yds. - 6.8'. Finished in Matte Black

$1,874.99 (50541)

Riser Blocks for Picatinny Rail Flat-tops• Black anodized aluminum riser blocks offer extra

height for proper sight picture and comfortable cheek weld

$13.95 each (LW-RB)

EOTech 512 Holographic Diffraction Sight (HDS)• The Model 512 Sight has become EOTech’s most

popular sight in the commercial market as it will run on 2 AA batteries (lithium, alkaline [included], or rechargeable) for 1100 hours continuous at a reticle brightness setting of 12 (20 settings total)

• It mounts to any Picatinny rail standard on the flattop receiver AR15, M16 or M4 type weapon, or any Weaver dovetail rail, with an integral mounting mechanism tightened by means of a large knurled thumbscrew

• Mounting on an AR15, M16 or M4 fixed carry handle requires addition of a Picatinny Rail mount (see Part# RAY-002 or the ARMS #2 mount)

• The AR15/M16 and M4 flat-top mounting platform provides for co-witnessing iron sights within the 512's Heads Up Display while maintaining the operator’s critical cheek weld position. The Sight’s Reticle offers a 65 MOA ring with a 1 MOA dot

• Windage and Elevation adjustments are made by means of large slotted screws on the side of the case (use a coin, screwdriver or spent casing)

• Eotech 512 Holographic Weapon Sight is equipped with the latest membrane switch design to provide excellent tactile response and positive snap feeling upon depression of the switches

• Offers a convenient battery check feature so that if battery power is less than 20%, the reticle will blink on and off for 5 seconds

• Automatically shut down after either 4 or 8 hours depending upon which button (Up or Down) is used to power it up

• EOTech offers a two year warranty against defects in workmanship or materials on the 512 Holographic Sight

$425.00 (EOT-512)

ured

Leupold® Mark 4® Steel Scope Rings• Rugged, solid steel construction, and highly

recoil resistant

• Mount easily onto any Picatinny rail

• Sold per pair

Leupold Mark 4® 30mm Scope Rings - Medium Height . . . . . . . . . . . . . . . . . . . . . . . . . . .(61049) $185.00Leupold Mark 4® 30mm Scope Rings - High Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(60699) $185.00


EOTech Model 552 HDS Sight• Rugged quality of all their models, but incorporates the

convenience of common AA battery power

• In normal operation, there are 20 reticle brightness settings in either 4 or 8 hour auto-shutdown modes. With “heads-up display” technology adapted from F-14 Tomcat Fighters, the Holographic Diffraction Sight is the first electro-optic sighting system to apply holographic technology to small arms

• The Model 552 features a night vision mode capability which can only be used with night vision equipment such as ANSPV7 Goggles or ANSPV14 Night Vision Scope/Goggle (must be used with night vision equip-ment to achieve full Night Vision Mode compatibility - but can be used as a normal holographic sight)

• With this system, 1 M.o.A. groupings can be achieved out to 300 yards

• Windage and Elevation can be adjusted in 1/4 M.o.A. increments

• With state of the art digital electronics design, the EOTech is waterproof, fog proof and shockproof

• Twenty levels ensure proper brightness control in either low light or bright sunlight

• A microprocessor provides automatic battery check indicator, up/down brightness scrolling and program-mable auto shut down

• Electronics are encapsulated in shock absorbing resin compound, and the sight’s tubeless design provides an unobstructed field of view for two-eyes-open shooting

• Simply look through the 1/4" thick shatterproof laminate window, place the reticle image on the target and shoot

• 1 M.o.A. aiming dot reticle patterns are instantly visible in even the lowest light, instinctive to center regardless of the shooting angle or position, and remain in view between shots

• The EOTech HDS will mount to any Picatinny configuration rail

$499.00 (EOT-552)

EOTech 510 HDS Sight• Similar to Model 512 on previous page, but powered

with a compact N type battery for space savings

• In CQB (Close Quarter Battle) environments, this revolutionary optic delivers speed gains in initial weapon presentation, accuracy in multiple target situations, uncompromised use of peripheral vision, and leaves no muzzle signature (The projected reticle is visible only to operator)

• The HDS locks onto the target as fast as your eyes do, and has been designed and tested to provide consistent, reliable performance even in the most hostile operational environments

• It is waterproof, fogproof, shockproof, and temperature proof

• The Heads Up Display is constructed with 3 layer, 3/16" thick shatterproof laminate glass for durability – additional display protection is provided by a rugged "roll bar" type hood

• 1 M.o.A. reticle aiming dot

$389.00 (EOT-510)

The Trijicon A.C.O.G. (Advanced Combat Optical GunSight) for AR15/M16• The finest optical design, 100% U.S. made components

and Mil-C-14806A multi-layer coated glass elements make the ACOG the ultimate telescopic sight

• Tritium elements cause the black daytime reticle in the ACOG 4x32 to glow red at night and in low light

• A forged aircraft aluminum housing is precision machined and hard anodized to match the finish of the M16

• The ACOG’s unique internal adjustment system (only the prism housing moves) makes this the most rugged scope available – it will withstand exposure to temperature extremes, salt spray, fog, fungus, humidity, sand, dust, shock, vibration and aerospace seals make the ACOG waterproof

• A see-through channel in the integral base permits use of the iron sights while the scope is mounted. Attachment to the rifle’s carry handle is with one or (optionally) two screws

• Trijicon ACOGs are adaptable to H&K; Sig 550; Beretta AR 70/90 with various A.R.M.S. adaptors. Dovetail adaptors for popular hunting/target rifles are available

$990.00 (TA01)EOTech Model 553 SOCOM Model HDS Sight• Similar to the Model 552 with upgraded switch mecha-

nism; submersible to 66 feet; includes 7mm mounting base with dual ARMS Throw Lever mechanisms to speed installation and removal with no loss of zero

• Extensively tested by US SpecOps Command

$675.00 (EOT-553)

configuration rail

$499.00 (EOT-552)((

www.bushmaster.com

adaptors for popular hunting/target rifles are available

$990.00 (TA01)

p g ynal display protectionded by a ruggedr" type hood

. reticledot

OT-510)

54 Orders 24 Hrs: 1.800.998.7928


Trijicon ACOG TA01NSN Special Forces Sight• This Trijicon ACOG fits the AR15/M16 “flat-top” rifles

and includes the TA51 Flat-top Mount • ACOG is an acronym for Advanced Combat Optical

Gunsight – and this one is the choice of many Special Forces groups

• It has been designed to withstand shock, vibration, temperature extremes, water, dust, sand and hard surface drops

• Unique modifications to this model include an integral rear ghost ring aperture and a tritium glow-in-the-dark front sight for close combat back-up sighting

• This model’s TA51 Mount also works with the Trijicon TA01, and is sold separately on previous page

$1115.00 (TA01NSN)

MeproLight® M-21 Day/Night Illuminated Reflex Sight• The right solution for military, police and sportsmen

when rugged construction and reliability count

• The Mepro 21 is a maintenance free, dual illuminated, red dot reflex sight especially designed for quick and instinctive accurate shooting – perfect while on the move in close quarters where the use of both eyes is critical

• The Mepro 21 provides instant, all light aiming without batteries

• Illumination for the aiming point comes from a fiber optic collector in daylight situations and from a miniature, self-powered tritium light source at night

• Mounting on your weapon is easy with dual quick release levers offering solid attachment onto any Picatinny rail

• Weight is 13.23 oz. / Length: 4.53" / Width: 1.65" / Height: 2.13"

• Available in two different reticle patterns

MeproLight® M-21 Day/Night Illuminated Reflex Sight with Bulls Eye Reticle . . . . . . . . . . . . . . . . . . . (ML96630) $580.00MeproLight® M-21 Day/Night Illuminated Reflex Sight with Open X Reticle . . . . . . . . . . . . . . . . . . . . . (ML96730) $580.00

Simmons AETEC® Master Series 2.8 - 10 x 44mm Scope• Simmons' new Master Series™ AETEC® is one

of the most innovative, high performance scopes ever designed

• Featuring Simmons' patented TrueZero™ flex erector system and new windage and elevation dials, the new AETEC delivers remarkably consistent shot placement and precise MOA adjustments throughout the entire range

• Add Simmons' new QTA™ Quick Target Acquisition eyepiece, which delivers a constant minimum 3.5 inches of eye relief and one of the most generous eye boxes in the industry, and you’ll have the confidence to know that your AETEC will get the job done from shot to shot and season to season

• The aspherical lens system found on this quality scope was first used on expensive binoculars and cameras

• True one piece tube construction is utilized

• It is waterproof, fog proof and weatherproof, has Suregrip™ rubber coated adjusting knobs, and Hydroshield™ water and condensation resistant lens coatings.

Innovations to the Simmons Aetec Scope include:• Simmons’ exclusive true one-piece tube construction

for increased mounting area

• Aspherical lens technology and fully multi-coated optics for the brightest, sharpest image in its class

• HydroShield™ lens coating helps maintain a clear sight picture – regardless of weather conditions

• New SureGrip™ rubber surfaces on all eyepieces and side-focus parallax adjustments make the AETEC one of the easiest scopes to adjust in the field

$189.95 (2101)$189.95 (2101)

5 00 ( 0 S )

NEW Trijicon AccuPoint Scope• Fast and easy target acquisition• Extends hunting time in low light conditions• Automatically adjusts brightness• Multi-coated lenses for superior clarity• Dual illuminated using fiber optics and

tritium (no batteries needed)• Waterproof to 10 feet

$750.00 (TRZO)

Simmons AETEC® Master Series2 8 10 44 S

Extends hunting time in low light conditions• Automatically adjusts brightness• Multi-coated lenses for superior clarity• Dual illuminated using fiber optics and

tritium (no batteries needed)• Waterproof to 10 feet

$750.00 (TRZO)


Leatherwood M-1200 6-24x50mm Camputer ART Riflescope for .308 - .50 BMG • For ranges from 300 to 1200 meters (200m range

setting also provided)

• 50mm adjustable objective –“No Math” Mil Dot reticle – air to glass surfaces are fully multi-coated for brilliant high resolution – adjustments are tactical type with 1/8 minute clicks

• Includes rings and a clamp-on flat-top mount for Picatinny and Weaver rails

$599.00 (LW-50)

Leatherwood Camputer M-1000 2.5X - 10X A.R.T. (Automatic Ranging & Trajectory) Riflescope• Adaptable to a variety of calibers from .223 to .50 BMG

• All the shooter needs to do is place the reticle on the target, zoom in to “frame” an area of known size (i.e. the 18” height of a buck’s chest cavity), aim, and squeeze the trigger

• The M-1000 features Multi-Dial Rings for up to 4 different zeroes, a new Picatinny mount with built-in windage adjustment, and a “No Math” Mil Dot reticle

• Construction is of quality optical glass, aircraft aluminum, with clear control knob increment markings, and a non reflective finish

$459.00 (LW-44)

Leatherwood Hi-Lux 50mm Red Dot Rifle Sight• This larger Leatherwood Red Dot Sight

offers a 50mm viewing area with an 88 foot Field of View at 100 yards

• An integral Picatinny type rail mount with large thumb screw clamp nuts makes installation/removal easy and offers excellent repeat zero

• 1 M.o.A. red dot system is powered by an ECR2032 lithium battery (included)

• Dot brightness is controlled by a twelve step rotating switch – windage and elevation adjustments are built in, and covered by protective caps

• Limited Lifetime Warranty

$105.95 (LW-RD)

A.R.M.S. #19 Weaver/Stanag Throw Lever Mount• Mount scopes, sights, etc. directly onto the

A3 flat-top receiver with guaranteed repeat zero or, with an ARMS#2 carry handle mount, interfaces to M16A1/A2/M4

$159.95 (ARMS 19)

Leatherwood Hi-Lux 30mm Red Dot Sight• This compact Red Dot Sight for 5.56mm / .223 Rem.

Caliber, and other Picatinny or Weaver Rail applications, was designed to offer quick target acquisition, and easy “two eyes open” shooting

• The non-magnifying Leatherwood Hi-Lux 30mm Red Dot features a 1 M.o.A. Dot, highest quality optical glass, elevation and windage adjustments,heavy aircraft aluminum construction, and a matte black non-reflective finish

• The brightness of the red sighting dot is controlled by an 11 position rheostat on the top of the sight with clearly marked increments on the control knob

• long-lasting 3 Volt Type ECR2032 lithium battery

• Ribbed rubber rings protect the sight body against knocks and drops, and mounting on your rifle’s Picat-inny/Weaver rail is made simple with the two knurled thumbnuts on the sight’s integral base

• Limited Lifetime Warranty

$83.95 (LW-RD30)

$459.00 (LW-44)

(LW RD)

56 Orders 24 Hrs: 1.800.998.7928

A.R.M.S. #2 Scope Mount for M16A1/A2• An excellent handle mount type scope platform for the

AR15/M16 rifles featuring the Swan universal mounting platform which accepts most all current military and police sighting systems, including NATO Stanag and Weaver type rails, without the need for adaptors

• Other features include: see-thru channel for iron sight use; fast positioning with fixed toggle bolt; self-locking thumbnut – will not loosen; repeatable zero hold

$68.95 (5855-01-299-777)

A.R.M.S. #5 MultiBase • A quick detach, multiple eye relief mount featuring a

spring loaded clamping bar and NATO Stanag & Weaver rail fastening

• Easily mounts to Picatinny/Weaver type rail or flat top receiver with locking, captivated thumbnuts

$68.95 (ARMS 5)

A.R.M.S. #40L Low Profile Flip-Up Rear Sight• A design improvement on the ARMS #40 below left,

this sight achieves a super low profile (.610 height when folded) and uses the same rugged lock down quick release lever and “no knockdown” stainless steel retention spring

• A unique “sandwiched” dual aperture flip-up combines a stationary close combat aperture and a 300 meter long distance accuracy aperture

• The automatic zero stainless steel retention plate and clamping bar/pin won't rust, other parts are matte black finished

• This sight includes a newly designed, miniaturized windage adjustment knob, will fit any mil. spec. flat-top Picatinny rail, and is as robust as the rest of the ARMS #40 series

• It carries U.S. Pat. No. 5,533,292

Note: This sight is designed to work in conjunction with the A.R.M.S. SIR System forends in our Handguards Section. Due to the aperture height on this sight, you should order the .040 taller Front Sight Post

$119.95 (ARMS 40L)

A.R.M.S. #40 Standard A2 Flip-Up Rear Sight• This U.S. Patented Flip-Up Rear Sight locks down with

a quick release lever when not in use (shown in both deployed and lock-down positions)

• Its flip-up combines a 250-300 meter close combat aperture and a 500-600 meter aperture with a horizon line feature that helps lead distant targets

• The automatic zero stainless steel retention plate and clamping bar/pin won't rust, all other parts are matte-black finished – fits any mil. spec. flat-top Picatinny rail

• This sight includes a newly designed, non-protruding, windage adjustment knob

• Due to the aperture height on this sight, you should order the .040 taller Front Sight Post

Note: This sight is designed to work in conjunction with the A.R.M.S. SIR System forends shown in our Handguards Section

$116.95 (ARMS 40)

A.R.M.S. #37 Ring Inserts• Steel inserts that allow use

of 1" diameter scopes within 30mm ring sets

$29.00 (ARMS 37)


( )

95 (5855-01 2

s

A.R.M.S. #19A Throw Lever Channel Mount for ACOG Sights• The “channel” mounts Trijicon ACOG Scopes to

mil. spec. Picatinny/Weaver rails with convenient A.R.M.S. repeat zero throw levers (positioned on left side so as not to obstruct the rifle’s ejection port)

$170.00 (ARMS 19 A)


Bushmaster Modular Accessories System Detachable Front Flip Sight and Three-Rail Gas Block• The B.M.A.S. Detachable Front Flip Sight (patent

pending) clamps snugly on the gas block’s top Picatinny rail with socket head screws for repeat zero every time.

• Machined from aircraft aluminum billet, it locks up or flips down at the touch of a button. Standard A2 front sight post with spring and detent locking system offers elevation zeroing just as with the original M16A2 sight.

The B.M.A.S. 3-Rail Gas Block can be ordered on new barrels as a factory installed option, or we can factory retrofit existing sight bases on .750" or .625" diameter barrels. • It’s three rails are in standard Picatinny configuration

to allow addition of flashlight or laser as side "mounted accessories.

• The B.M.A.S. Three Rail Block is precision milled from alloy steel; finished in black manganese phosphate; and drilled and tapped on the bottom for the addition of a sling swivel stud (Note: this stud is not intended as a bipod mount).

B.M.A.S. Detachable Front Flip-Up Sight only . . . . . . . . . . . . . . .(YHM-9371K) $77.50B.M.A.S. Three-Rail Gas Block only . . . . . . .(YHM-9370) $56.50Front Flip-Up Sight/Three-Rail Gas Block SET . . . . . . . . . . . . . . . . . . . . .(YHM-9370K) $127.95Three-Rail for .625" Barrel . . . . . . . . . . (YHM-9370-625) $56.50Three-Rail Kit for .625" Barrel . . . . . . (YHM-9370-625K) $127.95

A.R.M.S. #39A2 Bi-Level Rail• Mounts to M16A1 & A2 Carry Handle

for multiple combinations of attachments, and provides rigid support of the dovetail platform that is extended over the handguards

• A “brush breaker” on the front will prevent branches from snagging under the rail, and a “see-thru” channel in the #39A2 Upper Rail allows the use of existing iron sights.Note: This Rail System will not mount on the A3 Removable Carry Handle

$148.95 (ARMS 39)

B.M.A.S. Folding Front Sight/Gas Block• An all steel Gas Block/Folding Front Sight Combination

easily actuated with the push of a button – locks in the deployed position, it includes a standard AR front sight post, detent and detent spring, and is the same weight as a standard AR sight tower

• Split design allows it to be mounted onto barrels that already have pinned or welded muzzle brakes or suppressors – attaches easily with 4 cap screws (use of Loctite is recommended)

• Includes Bayonet Lug and Sling Loop. Manganese Phosphate finished for protection, it is shown flipped up in the foreground and folded in the shadowed image

• This unit fits all standard AR-15 type barrels with a .750” diameter at Gas Port

$91.95 (YHM-9394)

B.M.A.S. Fixed Clamp-on Front Sight• A standard height front sight, this unit adds

the convenience of a quick detach knurled thumbnut and clamping bar for easy removal.

• Returns to zero upon reattachment and includes standard AR Front Sight Post and Detent System – adjustable for elevation.

$50.50 (YHM-9495K)

A.R.M.S. #22 Throw Lever Rings• Patented 30mm steel rings secured with A.R.M.S.

dovetail system to an extruded aluminum platform

• “No-Mar” pads protect the rail and spring loaded levers act as shock absorbers – guaranteed repeat zero hold

• Available in three heights: Low - 1/4" rise (ARMS 22L) / Medium - 1/2" rise (ARMS 22M) / High - 3/4" rise (ARMS 22H)

$123.50 per pair

ium 1/2 rise (ARMS 22M) / High 3/4 rS 22H)

per pairy

$148.95 (ARMS 39)

Three Rail Kit for .625 Ba

achg bar

ment

–

YHM-9394)

58 Orders 24 Hrs: 1.800.998.7928

B.M.A.S. Low Profile Clamp-on Front Sight• A low profile Front Sight of quality alloy

steel that folds flat at the touch of its side button to allow clearance for any large bell scope

• It flips up to lock in the deployed position with zero repeatability, and includes a standard, AR Front Sight Post and Detent System. Black phosphate finished – made in USA

$78.95 (YHM-9584K)

B.M.A.S. Clamp-on Rear Flip-Up Sight• An aircraft grade aluminum, flip-up auxiliary sight

featuring dual apertures

• 1/2 M.o.A. windage adjustment

• Black anodized finish

• Convenient right hand adjustment knob and full height sight apertures

• Height when folded is1/8" lower than similar designs

$79.95 (YHM-9440)

B.M.A.S. Scope Risers• Increase scope mounting height on flat-top style

AR‘s by 1/2" to achieve proper cheek weld

• Hard anodized aircraft aluminum – fit all Picatinny/Weaver rails

• Two required for scope mounting – sold individually

A. 3/4" Long . . . . . . . . . . . . . . . . . . . . . . . . . (YHM-9490) $13.50 B. 1 1/4" Long . . . . . . . . . . . . . . . . . . . . . . . . (YHM-226) $15.95

B.M.A.S. Rail Extensions – 4"-7"-11.25" Lengths • These precision machined Rail Extensions – in standard

Picatinny rail dimensions – mount on all flat-top Upper Receivers to elevate the mounting surface approx. 1/2"

• The two longer lengths can join and solidify the Up-per Receiver to any Four Rail Forend offering the extra mounting surface length necessary for very large/long scopes or “scout-style” mounting

• All 3 Rails offers the convenience of quick detach/reat-tach with knurled thumbnuts

• Anodize finished machined aluminum with phosphated steel thumbscrews and clamping bars

4" Q. D. Rail Extension . . . . . . . . . . . . . . . . . (YHM-9595) $39.957" Q. D. Rail Extension . . . . . . . . . . . . . . . . . (YHM-9592) $62.9511.25" Q. D. Rail Extension . . . . . . . . . . . . . (YHM-9590) $86.95

lloysny

Bushmaster Modular Accessories System (B.M.A.S.) Front Flip Sight for V Match Rifles and Carbines• A high quality front sight that clamps around the V

Match milled sight base/gas block – designed to be used with any open iron rear sight

• This patent pending Front Flip Sight is machined from aircraft aluminum with an anodized finish, installs with an Allen wrench, locks up or down with a push button and is elevation adjustable

• A standard front sight post is included, and the base is drilled and tapped for our B.M.A.S. Sling Swivel Stud (see YHM-9364)

$106.50 (YHM-9360K)

B.M.A.S. Flip Sight Sling Swivel Stud• Threaded 3/8 x 24 to fit the V Match Front

Flip Sight above – accepts any Q.D. type sling swivel

$4.95 (YHM-9364)

B.M.A.S. Low Profile Rear Flip Sight• This flip-up rear sight for flat-top receivers features

a steel base, a quick release thumb screw, and an aluminum stem

• Locks up (deployed position) with the push of a button and folds down to .840 inches above the upper receiver

• Windage adjustment is 1/2 M.O.A., and a dual aperture rear peep is fitted

• Mounts to any Picatinny rail and will “co-witness” with standard AR15, M16 and M4 type front sights

• Once sighted-in, it can be removed and reattached with no loss of “zero”

• Fits behind A.R.M.S. S.I.R. System foreends

$91.95 (YHM-9680)

A B

1.25" Q. D. Rail Exte

up or down with a push buttonble

HM-9440)

t can be removed ando loss of “zero”

M.S. S.I.R.



B.M.A.S. Angled Accessory Mounts• Angled rail segments designed to mount various

accessories at a 45° angle on a “flat-top” Upper Receiver, or any multi-rail type forend

• Useful for flashlights or laser aiming devices, or with a pair, you could mount a scope in an “offset” position and still retain iron sight use

• Available in 3 different lengths: A - One Slot (3/4" length); B - Three Slot (1 3/8" length); and C - Five Slot (2 1/8" length)

• Machined from aircraft quality aluminum and finished in matte black hard anodize, mount to your rail surface with socket head screws

One Slot Mount (A) . . . . . . . . . . . . . . . . . . (YHM-9486A) $21.95Three Slot Mount (B) . . . . . . . . . . . . . . . . . (YHM-9690A) $26.50Five Slot Mount (C) . . . . . . . . . . . . . . . . . . (YHM-9691A) $30.95

Bushmaster Modular Accessory System Scope Riser• This Riser solves problems of scope movement or

rocking that might be encountered with individual riser sections

• A 5.25" Picatinny Rail Section mounts on any Flat-top Upper to raise the platform 1/2"

• Perfect on varmint rifles – accepts most types of scopes, red dot sights, and other optics

• Machined from aircraft quality aluminum and hardcoat anodized to military specifications

$32.95 (YHM-227A)

B.M.A.S. SuperLight Barrel Bushings• A set of thicker steel bushings to

mounts the =Triple Rail Kit above to the thinner Bushmaster SuperLight Barrels.

$13.95 (YHM-640-4)

B.M.A.S. Triple Mount Rail Kit• A quality multi-purpose accessory mount that

clamps to the barrel and fits around the front sight with three separate rail surfaces to allow mounting flashlights, bipod, laser sights, etc

• Designed to fit both Post & Pre-Ban barrels (with bayonet lug), there are insert bushings included with this kit that allow fitting to either .720" diam. rifle barrels (20"/24") or .740" diam. (14.5"/16") carbine barrels

• This triple mount will accept all Picatinny/Weaver base attachments, and is machined from high quality aircraft aluminum with Allen head clamping screws. Finished in black hard anodize to match rifle

$89.95 (YHM-639K)

Bushmaster A3 Type Removable Carry Handle with 1/2 M.o.A. Rear Sight• Add versatility to your “flat-top”– clamps solidly onto

the Picatinny Rail of any V Match or “Flat-top” Upper Receiver with knurled thumbnuts, and includes an A2 Dual Aperture Rear Sight with 1/2 M.o.A. windage and elevation adjustment

• Machined from aircraft aluminum forging, with steel sight and clamp parts

$116.95 (9349063-9)

Bennie Cooley Co-Witnessing Adjustable Mount• This optics mounting platform for the A2 Carry

Handle AR15/M16 is the most versatile co-witnessing mounting system made

• Vertically adjustable for easy alignment and custom fitting of any red dot optic (EOTech Holosight, Trijicon Reflex, Aimpoint Comp or others) in relation to the iron sights of the rifle. Mounts with a hex-head nut/threaded post, and height adjustments are made to the Picatinny rail with 8/32 button head retaining screws and the supplied 3/32" Allen wrench

$165.00 (EOT-12)32.95 (YHM 227 )

A B C

16.95 (9349063-9)

$165.00 (EOT-12)

ove toght

95 (YHM-639K)

60 Orders 24 Hrs: 1.800.998.7928

M203 Grenade Launcher Quadrant Sights for A2 & A3 Type Rifles• These are Government Issue Quadrant Sights for the

M203 Grenade Launcher

• Sights include a Flip-out Post & Aperture System, combined with an elevating scale set in 25 meter incre-ments from 50m to 400m

• There are models for both the A2 Solid Carry Handle Rifles and Carbines, and the A3 Removable Carry Handle type (they are not interchangeable)

For A3 Removable Handle Rifles . . . . . . . . (12598114) $105.50For A2 Solid Carry Handle Rifles . . . . . . . . . . . (9346304) $81.95

B.M.A.S. Handguard Mounted Flip-up Sight• The Bushmaster Modular Accessories System

solution to a handguard mounted back-up iron sight is this low profile, front flip-up unit

• It attaches to any forend Picatinny rail, and folds down out of line of sight at the push of a button

• It locks up in a deployed position, and mounts easily with a large knurled thumb screw

• Low profile, durable and lightweight all steel construction – manganese phosphate finished – includes AR square post, detent and spring – elevation adjustable just like the standard sight

B.M.A.S. Handguard Mounted Flip-up Sight . . . . . . . . . . . . . . . . . . . . . . . . (YHM-9627) $81.95

Command Arms Tactical Light Mounts• These mounts will accept 1"

or 15/16" diameter flashlights and hold them solidly onto your rifle or carbine with an internal rubberized pad-clamp

• It slides onto the M33 Handguard rail (page 35) – or any Picatinny type rail – an locks in place with a rugged push button mechanism

• Molded of high density black polymer

For Streamlight Scorpion and other 15/16" diameter flashlights.15/16" Tactical Light Mount . . . . . . . . . . . . .(FBS-FAS-3) $31.95

For Surefire & other 1" diameter tactical flashlights.1" Tactical Light Mount . . . . . . . . . . . . . . . . .(FBS-FAS-2) $31.95

Snap-on Forearm Light Mount• This heavy plastic base (shown installed, and

separately) snaps onto AR-15/M16 Rifle Forends (won’t fit the CAR handguards)

• Detents grip the forend vent holes for a firm mount

• On the side, a rail segment is mounted which is designed to accept a variety of tactical flashlights

(HPM3) $31.95

signed to accept a variety

M3) $31.95


Aluminum Scope Ring Sets• Top quality, matte black finished ring sets to

fit any Picatinny rail. U.S.A. made – heat treated alumi-num with 8-32 socket head screws in 1" Low, Medium or High Profile horizontally split design

• 30mm style is vertically split

• Wrench included with each set

Specify: 1" Low . . . . . . . . . . . . . . . . . . . . . . . . (W-20524) $15.95 per pair1" Medium . . . . . . . . . . . . . . . . . . . . . (W-20515) $15.95 per pair1" High . . . . . . . . . . . . . . . . . . . . . . . (W-20525) $15.95 per pair30mm Medium . . . . . . . . . . . . . . . . . (W-20513) $15.95 per pair


B.M.A.S. Flat-Top Fixed Rear Sight• This AR15 type fixed Iron Sight offers the option of

mounting optics further forward on the flattop rail

• The sight’s base is a heavy, black anodized aluminum block – other parts are steel

• Windage and elevation adjustments are 1/2

(YHM-643K) $102.50

Light & Laser Mounts for Bushmaster Carbon 15 Rifles and Pistols • These Mounts clamp to the barrel fluting on

Type 97 Pistols and Type 97 / 97S Rifles to offer mounting for various lights and lasers

A. Laser Mount Accepts 3/4" diameter laser sighting units. . . . . . . . .(AZ719) $26.95

B. Mag-Lite Flashlight Mount Holds 3/4" diameter lights. . . . . . . . . . . . . . . . . . . (AZ717L) $26.95

C. SureFire Mount Takes 1" diameter flashlights. . . . . . . . . . . . . . . . .(AZ718) $26.95(Surefire recommends their #650 Universal Weapon Light)

Kwik-Site See-Thru Scope Mount and Scope Ring Set• For A1 or A2 rifles with the solid carry handle, this

mount features a wide see-thru channel to enable the use of existing open sights

• Mounts to the handle with a large thumbnut

• A pair of 1" horizontally split scope rings is included

(KSN-M16) $53.95

NEW Cletus Front Sight Picatinny Rails• Mounts on the bayonet lugs under your front sight

• Very useful for mounting items like: Lights, Vertical Grips and Sling Connectors

• Three options available: 1) Without “ring” 2) With “ring” for right handed shooters 3) With “big ring” for left handed shooters

(10003) $64.95

A B C

62 Orders 24 Hrs: 1.800.998.7928

Accessories

M9 Bayonet with Scabbard• Designed to serve as a bayonet, a fighting knife,

field knife and wire cutter

• It fits many Bushmaster models as well as other M16 and AR15 type rifles

• Features a heavy 7.25" steel blade fitted with a checkered, black composite plastic handle

• Black oxide finish blade to reduce glare, and includes machined saw teeth on back edge

• Overall length is 14.5" (36.8 cm) and weight is 28 oz. (.79 kg)

$109.99 (GCC-M9 BLK BAYO)

M4 Typpe Handguuards w/ Heatshiields

Carrier, Piston and Piston

Housing

Operating Rod Owith Spring and wUpper Receiver U

Guide Sleeve

Bolt Carrier with Striker Face

Piston Housingg Supporrt

109.99 (GCC-M9 BLK BAYO)

NOTE: Bayonets are designed to fit only 14.5" & 20" Barrelled Rifles, and will only work with certain Flash Suppressors / Muzzle Brakes such as Birdcage types, Izzy Brakes; Phantoms; Mini & Y-Comps. Consult Bushmaster Sales if you have questions about a particular application.

Bushmaster Gas Piston Retro-Fit Conversion Kit for AR15/M4 type CarbinesNow you can easily add the Gas Piston System benefits of reliability, ease of maintenance, ability to fire a wider variety of ammunition, cooler running, and consistent function with this Bushmaster Gas-Piston

• Patent Pending, short stroke piston conversion system that includes all the necessary parts to convert your gas impingement type carbine

• low maintenance piston housed within a tubular structure that pins right into your existing front sight base

• Vents the gases under the hand guard and away from the operator.

• The high performance bolt carrier features increased mass, an integral impact lug and specially designed anti-wear features to protect your receiver

• Readily installed into your factory Upper Receiver Assembly without permanent modifications to your carbine

• Supplied with the kit are Heat Shielded M4 (oval) Type Handguards designed specifically to withstand rapid fire heat

• Fully functional for both semi-automatic and full- automatic weapons, and can be easily installed at home with simple hand tools

Why do the barrel and some parts (below) look so discolored? Because this unit had just successfully completed – without failure – a 10,000 ROUND NON-STOP ENDURANCE TEST!$399.95 (GP-GSR) M4 Barrel

$399.95 (GP-GSR-HB) Heavy Barrels

The Bushmaster Rifle Case • Economical storage, or travel protection for your

Bushmaster, or other firearms

• 47"x 9"x 3"dimensions, this case holds a full sized AR15/M16 rifle, or a scope mounted AR with receivers separated

• Shipping for 1st Case is $7.50 / Addtl. Cases: $6.00 each Bushmaster Rifle Case

$18.95 (Part #10483)

M7 Bayonet with M10 Scabbard• Fits 20" & 14.5" Bbl. AR15/M16 and AR180$34.95 (GC-BAYO SCAB KIT)


Discreet Carrying Case for Carbines• 32" black Cordura low profile case

• Includes Four Interior Magazine Pouches (for up to 40 Rd. Mags) and a Padded Outside Pocket for accessories

• Approximate Internal Dimensions: 32" x 13"

Discreet Case for Carbines . . . . . . . . . . . . . (DC-CAR-15) $85.95Discreet Case for Rifles . . . . . . . . . . . . . (DC-M16/AR15) $85.95• A similarly styled model with Inside Dimensions of 41" x

13" – designed for full sized AR15/M16Discreet Case for Uzi Short Bbl. SMG's . . . . . . . (DC-22) $85.95• Approx. Internal Dimensions of 22" x 11"

Bushmaster Logo Embroidered Carrying CasesLogo'd Carbine Case . . . . . . . . . . . . . . . . . . . . . (RC-36A) $85.95• Approx. internal dimensions: 36" x 11"

Logo'd Rifle Case . . . . . . . . . . . . . . . . . . . . . (RC-4123A) $85.95• Approx. internal dimensions: 40" x 11"

• A case for full sized rifles, with Bushmaster logo embroidered in red and white

Eagle Padded Rifle Cases for AR Type Rifles & Other Firearms• Each case features a lockable outside cargo compart-

ment; adjustable magazine pouches; reinforced 2" wide carrying handles; heavy duty YKK zippers; and a 2" wide, padded shoulder strap attached to welded steel D rings

• These quality Eagle cases will fit most standard military type AR15/M16 rifles

Full Size Rifle Case . . . . . . . . . . . . . . . . . . . . . (RC-4123) $79.95• Approx. internal dimensions: 40" x 11" Carbine Sized Case . . . . . . . . . . . . . . . . . . . . . . (RC-36) $79.95• Approx. Internal Dimensions: 36" x 11" 30" Carbine Sized Case . . . . . . . . . . . . . . . . . (RC-3223) $79.95• Fits FNC, LAR Para 30" & Tele AKsExtra Long Barrelled Rifle Case . . . . . . . . . . . (RC-4608) $79.95• Approx. Internal Dimensions: 45" x 10"

• This case will fit FAL 44 1/2" & LAR-HB 45" rifles.

Bushmaster Blur Folder by Kershaw – A Ken Onion Design• Premium quality knife features a 13C26 stainless steel

blade for strength and corrosion resistance

• Specifications: Blade Length – 3 3/8" (8.6 cm) / Closed Length – 4 1/2" (11.3 cm) / Weight – 4.2 oz.

$94.95 (1670RD)

Bushmaster Sighting-in Targets$2.95 / Pkg. of 12 (QP-015K)

Bushmaster Gift Certificates• Available in amounts

starting at $25

The “Life Jacket” Safety Device for AR15/M16 Rifles• Polycarbonate clamshell enclosure locks up your

AR type rifle and covers the entire action

• Two separate keyed locks and keys are included

• Foam padded interior with fixed carry handle

NOTE: To use the Life Jacket on a rifle with our V Match tubular aluminum forend, some material will have to be removed from the front opening.

$29.95 (L J -1)

The Bushmaster Gun Pad• 18" x 12" brightly

colored pad has crisp images of Bushmaster rifles, a protective laminated surface, and a soft, non-skid foam padded backing

$9.95 (QP-014)

Life Jacket V Match forend, l have m the

64 Orders 24 Hrs: 1.800.998.7928

RealTree® Hardwoods Camouflage FurnitureRifle Length Handguards . . . . . . . . . . . . . . . (9349059-C) $39.95A2 Solid Buttstock . . . . . . . . . . . . . . . . . . . . (9349119-C) $54.95Standard Pistol Grip . . . . . . . . . . . . . . . . . . (9349127-C) $19.95CAR Handguards . . . . . . . . . . . . . . . . (1005-914-4572C) $29.95CAR Furniture SET . . . . . . . . . . . . . . . . . (CAMO-RT-CAR) $99.95RIFLE Furniture 3 PIECE SET . . . . . . . (CAMO-RT-RIFLE) $106.95

Desert Camo FurniturePistol Grip . . . . . . . . . . . . . . . . . . . . . . . . (9349127-DC) $19.95Trapdoor Buttstock . . . . . . . . . . . . . . . . . .(9349119-DC) $54.95CAR Handguards . . . . . . . . . . . . . . (1005-914-4572-DC) $29.953 PIECE SET . . . . . . . . . . . . . . . . . . . . . . (CAMO-DC-CAR) $99.95

Bushmaster Blaze Orange Hunter’s Cap$10.95 (QP-002OH)

Bushmaster Two-Tone Cap

$9.95 (QP-002TTBR)

Bushmaster Canvas Cap$9.95 (QP-002BR)

Bushmaster Logo Patch$2.95 (QP-012)

Bushmaster Logo Decal$1.95 (QP-013)

Bushmaster Black & Tan CapBlack Cap . . . . . (QP-001) $9.95Tan Cap . . . . . . (QP-001T) $9.95

Bushmaster Knit CapsOrange Knit Cap. . . . . . . . . . . . . . . . . . . . . . . . . . . . (QP-002OR)

Black Knit Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (QP-002B)

Navy Blue Knit Cap . . . . . . . . . . . . . . . . . . . . . . . . . . (QP-002N)

Gray Knit Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (QP-002G)

$9.95 each

Bushmaster Logo Mug(QP-016) $4.95

Vapor II Glasses (R-01535) $12.95

• Sleek, sporty style

• Wrap-around polycarbonate lens with anti-fog coating

• Soft nose bridge prevents slipping

• Lightweight frame design

• Meets ANSI Z87+ and CSA Z94.3 standards

9595

each

BuBlaHu$10

BuCa$9.9

Accessories/Apparel


Bushmaster Logo Sweat Shirts• Heavy Jerzees "Super Sweats" crewneck pull-over

sweatshirts (50% cotton / 50% polyester)

• Bushmaster snake logo embroidered in red/white/black on upper left chest

• Order with the part numbers shown below followed

by your size: S - M - L - XL - 2XL

Khaki Tan . . . . . . . . . . . . . . . . . . . . . . (QP-021K & size) $27.95Black . . . . . . . . . . . . . . . . . . . . . . . . . .(QP-021B & size) $27.95Gray . . . . . . . . . . . . . . . . . . . . . . . . . .(QP-021G & size) $27.95

Bushmaster Sport Shirts• A 50/50 blend knit sport style shirt with collared,

three button neck

• Bushmaster snake logo embroidered in two colors on upper left chest

• Comfortable, durable, and great for the field, range or sporting event



White . . . . . . . . . . . . . . . . . . . . . . . (QP-002W & size) $24.95Black . . . . . . . . . . . . . . . . . . . . . . . . . (QP-002 & size) $24.95

Bushmaster Fleece Lined Jackets• Lots of the folks at the Bushmasterfactory stay warm

all the Maine winter long with this Fleece Lined Jacket

• It’s Toughlan® nylon shell is windproof and water resistant, it has a winter weight 11.5 oz. fleece lining and 3 zippered pockets (2 outer and 1 inner)

• Bushmaster logo is embroidered in red and white on the left chest

• Available in Black with Black Fleece Lining, or Khaki Tan with Green Fleece Lining

• Order with the part numbers shown below followed by your size: S - M - L - XL - 2XL - 3XL - 4XL - 5XL.

Black . . . . . . . . . . . . . . . . . . . . . .(QP-8800BB & size) $69.95 Khaki . . . . . . . . . . . . . . . . . . . . . . (QP-8800TG & size) $69.95

b h t

neck pull-overester)

d in red/white/black

below followed

021K & size) $27.95021B & size) $27.95021G & size) $27.95

66 Orders 24 Hrs: 1.800.998.7928

Apparel

Bushmaster Long Sleeve Logo Embroidered T-Shirt• Heavy weight Ultrablend 50% cotton / 50% polyester

• Embroidered red and black Bushmaster snake logo on upper left chest


by your size: M - L - XL - 2XL

Black . . . . . . . . . . . . . . . . . . . . . (QP-0222B-L & size) $16.95

Bushmaster Logo Embroidered T-Shirt• Heavy weight and high-quality 100% cotton

• Embroidered red and black Bushmaster snake logo on upper left chest


by your size: M - L - XL - 2XL

White . . . . . . . . . . . . . . . . . . . . . . . . . (QP-007 & size) $14.95

Bushmaster Screen Printed T-Shirts• Quality blend 50% cotton / 50% polyester

• Bushmaster snake logo silkscreened in two colors on upper left chest with larger variations on the back



Black . . . . . . . . . . . . . . . . . . . . . . . . . (QP-003 & size) $15.95 White . . . . . . . . . . . . . . . . . . . . . . . (QP-003W & size) $15.95

95 95

Back

Back

Front

Front


EOTAC Long-Sleeve Shirt• 8 oz. all-cotton, fade resistant, pre-shrunk and

washed, with wrinkle resistant finish

• Ribbed anti-roll collar

• Ribbed cuffs

• Zippered sleeve pen pocket

• Straight cut bottom with extended shirt tail

• Side vents and sweat patch

• Order with the part numbers shown below followed by your size: S - M - L - XL - 2XL

Black . . . . . . . . . . . . . . . . . . (QPE-407-BLK-S & size) $54.99 Khaki . . . . . . . . . . . . . . . . . . . (QPE-407-KH-S & size) $54.99

EOTAC Short-Sleeve Polo• 8 oz. all-cotton, fade resistant, pre-shrunk and

washed, with wrinkle resistant finish

• Ribbed anti-roll collar

• Zippered sleeve pocket

• Straight cut bottom with extended shirt tail

• Side vents and sweat patch


Black . . . . . . . . . . . . . . . . . . (QPE-405-BLK-S & size) $36.99 Khaki . . . . . . . . . . . . . . . . . . . (QPE-405-KH-S & size) $36.99Red . . . . . . . . . . . . . . . . . . . (QPE-405-RED-S & size) $36.99

68 Orders 24 Hrs: 1.800.998.7928

Apparel

EOTAC Short-Sleeve Shirt• 5.5 oz. all-cotton poplin, fade-resistant, pre-shrunk

and washed, DuPont Teflon® fabric protector

• Button down collar

• Sleeve pen pocket

• Bellowed chest and zippered utility pockets

• Straight cut bottom with side vents

• three-way ventilated back



EOTAC TackVest• Outer shell: Bomb-proof 8.5 oz. all-cotton canvas,

fade-resistant, pre-shrunk and washed, DuPont Teflon® fabric protector

• Lining: 5.5 oz. all-cotton poplin, fade-resistant, pre-shrunk and washed, DuPont Teflon® fabric protector

• Order with the part numbers shown below followed by your size: S - M - L - XL - 2XL - 3XL

• Additional $8 for 3XL



CUSTOMER SERVICE, EXCHANGES, BACKORDERS, GUNSMITHING, WARRANTY

NOTE: With the “Sunsetting” of the Gun Legislation of 1994, many features of “Pre-Ban” rifles are again available – BUT not in all areas! California, Connecticut, Hawaii, Massachusetts, Maryland, New Jersey, New York, Puerto Rico, and possibly others, all have their own Statutes regarding what they call “Assault Weapons.” To avoid the possibility of legal problems, check your local laws before purchasing some items offered in this catalog.

CUSTOMER SERVICE. Our telephone personnel are highly experienced and well informed firearms enthusiasts. If you have any questions about Bushmaster products, you'll find a courteous member of our firm willing and able to answer them – just call our Toll-Free Customer Service line (1-800-883-6229) between 8:30 am - 6:00 pm, Monday through Friday, (E.S.T.). We will also be happy to promptly answer your questions, or order inquiries, via E-mail to: [email protected]

EXCHANGES. Should items you order from Bushmaster not be to your expectations, please contact our customer service department for a Return Merchandise Authorization (RMA) Number. Unused items may be returned within 30 days, include a copy of your invoice. Note: Any Custom Barrel Assembly – not shown in catalog – may not be returned. No refunds allowed after 15 days of invoice date. Restocking charge 20%. Include invoice with your return – its upper left corner can be used as return label. Return all pieces of kits – wrap and package them securely. Insure package for your protection. Include the reason for return of each item in an accompanying letter and we will do everything possible to speed your exchange.

BACKORDERS. We make every attempt to deliver your order from available stock - immediately. Should there be a backorder on a part, we'll ship the bulk of your order and WE pay the shipping on the backordered part (with the exception of complete rifles). FedEx Standard Overnight (1 Day); FedEx 2 Day and FedEx Express Saver (3 Day) Services are available upon request at additional charge. For C.O.D. Service from FedEx, please add $8.50 per package (Note: FedEx will accept cash as C.O.D. payment).

BUSHMASTER GUNSMITHING. Our company policy is to offer gunsmithing assembly at no charge when parts are purchased from us (with the exception of sight bases). We will also offer our professional gunsmithing services to any customers who care to ship us their firearms or assemblies for repair or buildup – and we will work on brands other than Bushmaster. Gunsmithing time is charged at $40.00 per hour, and we charge a $16.50 fee for return shipping of your rifle, upper or parts ($19.50 for DCM Rifles due to extra weight). For a gunsmithing estimate, please call 1-800-998-7928 or E-mail to: [email protected]

BUSHMASTER LIMITED ONE YEAR WARRANTY. Bushmaster Firearms are warranted to be free from defects in materials and workmanship. Any such defect of which Bushmaster Firearms International, LLC is given written notice, as provided below, within one year and ten days from the date of first purchase by a customer will be remedied by Bushmaster Firearms International, LLC. This warranty is granted by Bushmaster Firearms International, LLC, P.O. Box 1479, 999 Roosevelt Trail, Windham, Maine 04062.

To initiate a Warranty claim, call Bushmaster Customer Service (toll free: 8:30 AM to 6:00 PM E.S.T. – Monday thru Friday 1-800-883-6229) to get an RMA number (“Return Merchandise Authorization”). Warranty claims should state (in writing) the model and serial number of the fire-arm concerned, a description of the difficulty experienced, and the date of purchase. The firearm concerned should be shipped (transportation charges prepaid), to the Warranty Service Department, Bushmaster Firearms International, LLC, 999 Roosevelt Trail, Windham, ME 04062. Firearm shipment should be insured by the owner, as Bushmaster Firearms International, LLC will accept no responsibility for loss or damage in transit.

Shipping and insurance charges for the return of a firearm to its owner will be paid by Bushmaster Firearms International, LLC if the related claim is a proper claim for warranty work.

Under no circumstances shall Bushmaster Firearms International, LLC be responsible for incidental or consequential damages with respect to economic loss or injury to property, whether as a result of express or implied warranty, negligence or otherwise. Some states do not allow the exclusion of limitation of incidental or consequential damages, so the above limitation may not apply to you. Bushmaster Firearms International, LLC will not be responsible for the results of careless handling, unauthorized adjustments, defective, low quality, reloaded, or improper ammunition, corrosion, neglect, ordinary wear and tear, or unreasonable use. Furthermore, the liability of Bushmaster Firearms International, LLC under this warranty shall be limited solely to the obligation to repair or replace the firearm, and to pay transportation and insurance charges for return of the firearm to owner.

NOTE: Handguns and long guns are classified as FIREARMS or DANGEROUS WEAPONS. Guns are surrendered by Bushmaster Firearms Inter-national, LLC with the express understanding that it assumes no responsibility for resale handling under local laws and regulations.

A NOTE REGARDING LEAD. Discharging firearms in poorly ventilated areas, cleaning firearms, or handling ammunition may result in exposure to lead, a substance known to cause birth defects, reproductive harm, and other serious physical injury. Have adequate ventilation at all times. Wash hands thoroughly after exposure to lead.

70 Orders 24 Hrs: 1.800.998.7928

ORDERING INSTRUCTIONS / SHIPPING INFORMATIONFOR FASTEST ORDER PROCESSING, visit our Website and order direct from our online catalog at WWW.BUSHMASTER.COM

Our entire catalog and more is on the Internet – offering easy and secure ordering without waiting time on the phone! Many of our orders received via Internet are processed and shipped the same day (with the exception of back ordered items). Any orders that include E-mail addresses automati-cally get a return mail confirmation of shipment including the type of shipping service, a FedEx tracking number (if applicable), C.O.D. costs (if applicable), and notification of multiple packages. Customer Service and Technical Support inquiries can also be handled quickly and efficiently by E-mail. Contact us at: [email protected] • [email protected] • [email protected]

For Telephone Orders, Call: 1-800-998-7928Bushmaster Sales Consultants are on call: Mon. through Fri.: 8:30 am – 7:00 pm(Eastern Standard or Daylight Savings Time – all other hours of the day by answering machine)

For Orders by FAX: 1-207-892-8068 • Customer Service: 1-800-883-6229(Customer Service Phone Hours: Monday through Friday - 8:30 am - 6:00 pm)

All Catalog Prices are in U.S. Dollars – Please Pay in U.S. Currency

CATALOG PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE!Current pricing can be seen on our website – www.bushmaster.com

Please Have Your Credit Card Available. We will NOT charge your credit card until we ship your order! FREE Gunsmithing and assembly is available on most AR15/M16 parts at the time of purchase. We accept purchase orders from Federal, State, and Local Governments and Institutions.

SHIPPING – Orders will be shipped promptly via FedEx or First Class U.S. Mail. FedEx Ground is our standard method of shipment. FedEx

Standard Overnight (1 Day); FedEx 2 Day and FedEx Express Saver (3 Day) Services are available upon request. All orders must be accom-panied with Cash; Credit Card Information; Money Order or Cashier's Check or they will be shipped FedEx C.O.D. (C.O.D. to Continental U.S., Alaska and Hawaii incurs an extra $8.50 fee per package. FedEx will accept cash as payment – FedEx requires a Phone Number for C.O.D. deliveries as well as any upgraded delivery services). We request telephone numbers and/or E-mail address when you order to provide the best possible service in case of questions. In an effort to preserve your privacy, we do not sell our mailing lists. An F.F.L. (Federal Firearms License) is required for the purchase of Complete Rifles, serial numbered Lower Receivers, or M16 components. Other parts and accessories do not require special licenses. Personal checks are held 15 days to clear. No refunds after 30 days of invoice date. Returned parts will incur a 20% restocking charge.

NOTE: FedEx has a mandatory “Adult Signature Required” (21 years or older) for all complete Firearms and Lower Receiver shipments.

This Adult Signature Requirement is a FedEx regulation and cannot be waived.

PISTOLS – Federal Law requires that all pistols be shipped by Air Service. FedEx’s mandatory “Adult Signature Required” (21 years or older) will also be in effect.

DAMAGE – If your FedEx Package arrives damaged, you must alert the FedEx Driver, or call FedEx to notify them of damage problems and to initiate a claim. The FedEx toll-free national telephone line for this purpose is 1-800-GO-FEDEX.

INTERNATIONAL ORDERS – Bushmaster will now accept International Orders of any amount, subject to U.S. State Department (ITAR) and Dept. of Commerce regulations. Bushmaster does have established dealers in countries outside the U.S.A. who may be able to supply your needs – contact Bushmaster for further information.

FOR SHIPPING PARTS ONLY – WITHIN CONTINENTAL U.S. (Shipping to Puerto Rico and other Territories is charged at cost.)Shipping, Handling & Insurance Charges for FedEx Ground Service or U.S. Mail are:$0.00 - $19.99 = $6.50 / $20.00 - $49.99 = $9.00 / $50.00 - $99.99 = $11.50$100.00 - $249.99 = $14.50 / $250.00 - $499.99 = $18.00 / $500.00 and up = $21.00

FOR SHIPPING COMPLETE FIREARMS – WITHIN CONTINENTAL U.S.Standard Rifle – FedEx Ground – $16.50 ea. / DCM Rifle – FedEx Ground - $19.50Pistols – BY LAW – must be shipped by Air Service.Free Shipping on backordered “Parts” only. Shipping Charges on parts orders over 20 lbs. will be calculated by weight only using our Fedex published rates plus insurance of .50¢ per $100.00 value.FedEx C.O.D. Fee – $8.50 per package. NOTE: FedEx will accept cash as payment for C.O.D.sFedEx Standard Overnight (1 Day); FedEx 2 Day and FedEx Express Saver (3 Day) Services are available upon request.


Method of Payment: ��Check or Money Order Enclosed (Personal Checks are held for 15 Days to Clear.)

� MasterCard � VISA � American Express � Discover � C.O.D.*

All credit card orders must include phone number and must be shipped to address where cardholder receives credit card billing.

If payment is made with � Gift Certificate (Certificate Number)

Credit Card Account Number Expiration Date

Signature

Ship Via: � FedEx Ground (our standard method – other services available)

� U.S. Mail – PARCEL POST (No C.O.D.s*)

Have you ordered from us before? � Yes � No Would you like to receive future catalogs? �

Standard Rifle – FedEx Ground – $16.50 ea. / DCM Rifle – FedEx Ground – $19.50

Pistols must be shipped by Air Service. Shipping will be free on backordered “Parts” only.

Shipping charges on parts orders over 20 lbs. will be calculated by weight only using our FedEx published rates plus insurance of .50¢ per $100.00 value.FedEx C.O.D. Fee – $8.50 per package. (Note: FedEx will accept cash as C.O.D. payment – a phone number is required.)

Call about shipping orders to Hawaii, Alaska, Puerto Rico and other U. S. Territories.

ORDER FORM SHIP TO:

Your fastest ordering method is on the internet at www.bushmaster.com

Name Customer No.

Address

City State ZIP

Phone Number E-mail

(If available – see catalog label)

PAGENO. QTY PART NO. DESCRIPTION PRICE

(EACH) AMOUNT

SUBTOTAL

All States Sales Tax

Shipping, Handling & Insurance

TOTAL AMOUNT

$ 0.00 - $19.99 = $ 6.50 $20.00 - $49.99 = $ 9.00 $50.00 - $99.99 = $11.50

$100.00 - $249.99 = $ 14.50 $250.00 - $449.99 = $ 18.00 $500.00 - up = $ 21.00

SATISFACTION GUARANTEED, OR YOUR MONEY BACK. PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.

*FedEx C.O.D. is available. Cash payment is accepted. Phone Number is Required.

Shipping, handling & insurance charges for parts only – FedEx Ground Service or U.S. Mail: Other

FedEx Services are available at extra cost – consult your salesperson.

ww

w.bu

shm

aste

r.com

Phon

e Or

ders

: 1-8

00-9

98-7

928

Prin

ted

in U

.S.A

.

Rev.

12/1

/09

Bush

mas

ter F

irear

ms

Inte

rnat

iona

l, LL

C99

9 Ro

osev

elt T

rail •

P.O.

Box

147

9W

indh

am, M

E 04

062

Documents

Accessories Cat