Job Name ________________________________________________

Item Number _____________________________________________

Section/Tag ______________________________________________

Model Specified ___________________________________________

Architect _________________________________________________

Engineer _________________________________________________

Contractor ________________________________________________

[ ] Submitted as Shown [ ] Submitted with Variations

Date _____________________________________________________

ACCESSORIES AND PARTS

131-CFMAB

Product Type___________________________________________________ECAST® Thermostatic Mixing Valve

Features & Specifications___________________________________________________• Installs between the stop valves and the faucet for single or multiplefaucet installations• Includes Pipe Flush Mode for high temperature system flushing used inthermal disinfection• Adjustment cap with locking feature• Integral inlet check valves to protect against cross-flow• Thermostatic wax element; thermostat controls both hot and cold water• Brass body construction with corrosion-resistant internal components,includes plastic wall bracket• Standard 3/8" compression inlets and outlets• Includes 3/8" compression tee inlet connection for cold water bypassand 3/8" compression angle outlet connection for hot water hookup• Minimum supply pressure: 30psi (207 kPa); Hot inlet temperature:100°F-180°F (38°C-82°)• Outlet water temperature will be less than hot water inlet temperature• Minimum Flow Rate: 0.35 gpm (@ min. 20 psi)• Maximum Flow Rate: 4.6 gpm (@ min. 125 psi)• Temperature Out: 80°F to 120°F (27°C to 49°C)• ECAST® design provides durable construction with total lead contentequal to or less than 0.25% by weighted average• CFNow! Item Ships in 3 Days

Warranty___________________________________________________• Lifetime Limited Faucet Warranty• 1-Year Limited Cartridge Warranty• 1-Year Limited Finish Warranty• 1-Year Manufacturing Material Defects Warranty

Codes & Standards___________________________________________________• CSA B125.3• Certified to NSF/ANSI 61, Section 9 by CSA• ASSE 1070/ASME A112.1070/CSA B125.70• California Health and Safety Code 116875 (AB1953-2006)• Vermont Bill S.152• NSF/ANSI 372 Low Lead Content

ECAST products are intended for installation where state laws and localcodes mandate lead content levels or in any location where lead contentis a concern.

Last Revision: 03/17/2017 • Date Printed: 02/20/2018 • Product specifications subject to change without notice

2100 South Clearwater DriveDes Plaines, IL

P: 847/803-5000F: 847/803-5454

Technical: 800/TEC-TRUEwww.chicagofaucets.com

131-CFMAB

Architect/Engineer Specification________________________________________________________________________________________________________Chicago Faucets No. 131-CFMAB, ECAST® Thermostatic Mixing Valve. Installs between the stop valves and the faucet for single or multiple faucetinstallations. Includes Pipe Flush Mode for high temperature system flushing used in thermal disinfection. Adjustment cap with locking feature.Integral inlet check valves to protect against cross-flow. Thermostatic wax element; thermostat controls both hot and cold water. Brass bodyconstruction with corrosion-resistant internal components, includes plastic wall bracket. Standard 3/8 compression inlets and outlets. Includes 3/8compression tee inlet connection for cold water bypass and 3/8 compression angle outlet connection for hot water hookup. Minimum supply pressure:30psi (207 kPa); Hot inlet temperature: 100°F-180°F (38°C-82°). Outlet water temperature will be less than hot water inlet temperature. Includes wallbracket. Minimum flow rate: 0.35 gpm (@ min. 20 psi). Maximum flow rate: 4.6 gpm (@ min. 125 psi). Temperature out: 80°F to 120°F (27°C to49°C). ECAST® construction with less than 0.25% lead content by weighted average.

Operation and Maintenance________________________________________________________________________________________________________Installation should be in accordance with local plumbing codes. Flush all pipes thoroughly before installation. After installation, remove spout outlet orflow control and flush faucet thoroughly to clear any debris. Care should be taken when cleaning the product. Do not use abrasive cleaners,chemicals or solvents as they can result in surface damage. Use mild soap and warm water for cleaning and protecting the life of Chicago Faucetproducts. For specific operation and maintenance refer to the installation instructions and repair parts documents that are located at www.chicagofaucets.com.

Chicago Faucets, member of the Geberit Group, is the leading brand of commercial faucets and fittings in the United States, offering a completerange of products for schools, laboratories, hospitals, office buildings, food service, airports and sport facilities. Call 1.800.TECTRUE or1.847.803.5000 Option 1 for installation or other technical assistance.

Last Revision: 03/17/2017 • Date Printed: 02/20/2018 • Product specifications subject to change without notice

2100 South Clearwater DriveDes Plaines, IL

P: 847/803-5000F: 847/803-5454

Technical: 800/TEC-TRUEwww.chicagofaucets.com