Parameter Call-up Menus

1

Access to the Parameter Call-Up Menus Make sure that this(these) circuit breaker(s) is(are) closed:

PANEL DESIGNATION IDENT. LOCATION

121VU AIDS/DMU (AIDS & RCDR/FDIMU) 4TV(5TV) K15

A. Enter the Parameter Label Call-up through MCDU.

ACTION RESULT

On the MCDU: On the MCDU display:

- Push the MCDU MENU mode key.

- The MCDU MENU page shows. - Push the Line Select Key (LSK) adjacent to < AIDS indication.

- The AIDS page shows. - Push the LSK adjacent to CALL-UP < PARAM LAB indication.

- The AIDS PARAM LABEL CALL-UP page shows.

- Enter the Parameter Label Call-up with the alphanumeric keys in the format as follows: EQ/SYS/LAB/SDI and optional /DATABITS (Ref. AMM 31-37-00-001).

- The Parameter Label Call-up shows on the bottom of the display (scratchpad).

NOTE: It is important to enter the DATABITS value if it is other than the default. The decimal value calculation is based on its value.

-

Push the LSK 1L or 4L to take over the Parameter Label Call-up.

- The Parameter Label Call-up shows on the Data Field with all information.

- Push the MCDU MENU mode key.

- The MCDU MENU page shows. B. Enter the Parameter Alpha Call-up through the

MCDU.

ACTION RESULT

On the MCDU: On the MCDU display:

- Push the MCDU MENU mode key.

- The MCDU MENU page comes into view.-

Push the Line Select Key (LSK) adjacent to < AIDS indication.

- The AIDS page comes into view.

-

Push the LSK adjacent to CALL-UP PARM ALPHA > indication.

- The AIDS PARAM ALPHA CALL-UP page comes into view.

- Enter the correct Alpha Call-up Code with the alphanumeric keys (Ref. AMM 31-36-00-001). See at the Parameter Alpha Call-up List (Ref. AMM 31-37-00-001).

- The Parameter Alpha Call-up shows on the bottom of the display (scratchpad).

- Push the LSK 1L, 3L, 4L or 5L Key to take over the Parameter Alpha Call-up.

- The Parameter Alpha Call-up shows on the Data Field with all information.

Parameter Call-up Menus

2

NOTE: Only the data field adjacent to the 1L key can show four values.

- Push the MCDU MENU mode key.

- The MCDU MENU page comes into view.

** ON A/C 003-050, 053-099, 101-199, 201-249, 252-299, 301-349, 351-399 POST SB 31-1148 for A/C 101-199, 253-299

Subtask 31-36-00-740-056-A A. Enter the Parameter Label Call-Up through MCDU.

ACTION RESULT

On the MCDU: On the MCDU display:

- Push the MCDU MENU mode key.

- The MCDU MENU page shows. -

Push the Line Select Key (LSK) adjacent to the < AIDS indication.

- The AIDS page shows.

- Push the LSK adjacent to the < PARAMETER CALL UP LABEL indication.

- The AIDS:LABEL CALL-UP CTRL page shows.

-

Push the LSK adjacent to the < LABEL MENU DISPLAY indication.

-

The AIDS:LABEL CALL-UP page shows.

- Enter the Parameter Label Call-Up with the alphanumeric keys in the format as follows: EQ/SYS/LAB/SDI and optional /DATABITS (Ref. AMM 31-37-00-001).

- The Parameter Label Call-Up shows on the bottom of the display (scratchpad).

NOTE: It is important to enter the DATABITS value if it is other than the default. The decimal value calculation is based on its value.

-

Push the LSK 1L or 4L to take over the Parameter Label Call-Up.

- The Parameter Label Call-Up shows on the Data Field with all information.

NOTE:Two Label Call-Up parameters can be displayed at one time.

- Push the MCDU MENU mode key.

- The MCDU MENU page shows. Subtask 31-36-00-740-057-A

B. Parameter Alpha Call-up through the MCDU.

ACTION RESULT

On the MCDU: On the MCDU display:

- Push the MCDU MENU mode key.

- The MCDU MENU page shows. -

Push the Line Select Key (LSK) adjacent to the < AIDS indication.

- The AIDS page shows.

- Push the LSK adjacent to the < PARAMETER CALL UP ALPHA indication.

-

The AIDS:ALPHA CALL-UP CTRL page shows.

- Push the LSK adjacent to the < ALPHA MENU DISPLAY indication.

- The AIDS:ALPHA CALL-UP page shows.

- Enter the correct Alpha Call-Up Code with the alphanumeric keys (Ref. AMM 31-36-00-001).

- The Parameter Alpha Call-Up shows on the bottom of the display (scratchpad).

Parameter Call-up Menus

3

Refer to the Parameter Alpha Call-Up List (Ref. AMM 31-37-00-001).

- Push the line key 2L, 3L, 4L or 5L Key to take over the Parameter Alpha Call-Up.

- The Parameter Alpha Call-Up shows on the Data Field with all information.

- Push the MCDU MENU mode key.

- The MCDU MENU page shows.