Accelerator Activities at SpainAccelerator Activities at Spain

MadridCIEMA

TCMAM

ValenciaIFIC

BilbaoESS

Barcelona ALBAUPC

SevillaCNA

1PAC-ILC May 2010

2

Accelerator Activities for Future Accelerator Activities for Future Linear Colliders Linear Colliders

PAC-ILC May 2010

Accelerator Activities for Future Accelerator Activities for Future Linear Colliders at SpainLinear Colliders at Spain

MadridCIEMA

TValencia

IFIC

Barcelona UPC

3PAC-ILC May 2010

Accelerator R&D for FLC at CIEMAT

PAC-ILC May 2010 4

Capabilities

3-D modelling of the magnet with its cryostat

Magnet during fabrication

MAGNETS and RF STRUCTURES:

- CALCULATIONElectromagnetic analysis

• Electric circuits & electronics

•Superconductivity

•High and low frequencyMechanical analysis

- PROTOTYPINGDesign: tooling, drawingsFabrication follow-upAssemblyTesting and Calibration

RF calculation for PETS

PAC-ILC May 2010 5

Main ongoing projects

ILC and its Accelerator Test Facilities:

ILC quadrupole package without BPM (Cos2 and super ferric) (DESY)

XFEL intersections: phase shifter (Including magnetic measurements), precision movers for quads, support base for the full intersection (DESY)

CLIC and its Test Facility CTF3:

Corrector magnets, septa, kickers for CTF3 (CERN)

Micro-movers for TBL quads (CERN)

PETS for the TBL in CTF3 and the 1st module of CLIC (CERN)

PAC-ILC May 2010 6

Fabrication of XFEL superferric quads

PAC-ILC May 2010 7

XFEL Intersections

Phase Shifter Prototype

Measurement bench 3D Model

Quadrupole mover with integrated

LVDT’s under tests

PAC-ILC May 2010 8

PETS structure assembly

PAC-ILC May 2010 9

Accelerator R&D for FLC at IFIC

PAC-ILC May 2010 10

11

Capabilities

- CALCULATIONBEAM DYNAMICS:

Electromagnetic analysis

• Electric circuits & electronicsMechanical analysis

Optics designNon-linear dynamics studiesNew instrumentation techniquesCommissioning

3-D modelling of BPM

- PROTOTYPINGDesign: tooling, drawingsFabrication follow-upAssemblyTesting and Calibration

BEAM INSTRUMENTATION :

Emittance simulations and measuremts in ATF

PAC-ILC May 2010

Main ongoing projects

ILC and its Test Facilities:

Beam dynamic studies and commissioning of ATF EXT line (LAL, KEK, SLAC)

Multi-OTR system for ATF2 (SLAC, KEK)

BPM supports with micromovers for FONT4 in (KEK, JAI)

BDS instrumentation studies

CLIC and its Test Facility CTF3:

BPM’s for the TBL in CTF3 (UPC, CERN, Applied Physics-UV)

Drive Beam BPM’s for the 1st CLIC module (CERN)

PAC-ILC May 2010 12

13

ILC and its Test Facility ATF-ATF2

Beam spot measurement with OTR1X

Focus adjusterslide

X and Y targetposition viewingadjusters

Mitutoyo 10X lensAnd 1x tube lens

90deg mirror

Newport Vertical mover

NewportHorizontal mover

Target inserter

Prosilica camera

OTR1X ATF2 EXT line

target

CCD camera

beam

New OTR design for muli-OTR system

Mover installed at ATF2

FONT4 movers

New OTR1 in the ATF2 EXT line

PAC-ILC May 2010 13

The CLIC and its Test Facility CTF3

Low-frequency wire set-up 3D view design

Control and DAQ equipment for all the setup signals

BPS for TBL at CTF3

Drive beam BPM for CLICPAC-ILC May 2010 14

Accelerator R&D for FLC at UPC

PAC-ILC May 2010 15

H

V

∆H∆V∑

Inductive pick-up

AFE: Analog Front-end Electronics

DIGITIZER

PAC-ILC May 2010 16

Main ongoing projectsThe BPS amplifiers for TBL of CTF3

Main ongoing projects

The balance for all this collaboration project has been very positive: New capabilities have been created in the Spanish institutes which are being

used for other facilities

Spanish companies having produced these devices for first time in our country are in position to participate in the industrialisation in a future

PAC-ILC May 2010 17

Future projects

The goal is to consolidate these contributions joining the effort of ILC for the EDR and CLIC for the CDR in a coordinated way:

ILC and its test facilities: HTc superconducting quads with indirect cooling for MLI, Dipole mode cavity BPM for ILC cryomodule, multi-OTR in ATF2 EXT line, micromovers for FONT4 in ATF2

CLIC and its test facilitiy CTF3: PETS for 1st CLIC module, BPMs for drive beam injector and Drive Beam Decelerator for the CLIC modules

PAC-ILC May 2010 18

19

Thanks to Fernando Toral and Thanks to Fernando Toral and the Ciemat Accelerator group the Ciemat Accelerator group for helping in the preparationfor helping in the preparation

Thanks for your attention Thanks for your attention

PAC-ILC May 2010