Upload
ngomien
View
217
Download
2
Embed Size (px)
Citation preview
APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED
TitleJoseph L. Lenhart,(410) [email protected]
S&T Campaign: Materials ResearchUnique ARL Facilities (APG)
Mission: Safe, reproducible, and novel processing approaches for hierarchical polymers, targeting improvements in mechanical, electrical, optical, transport, and reactivity properties, serving the full spectrum of ARL mission critical research areas.
1) Laboratory engineering controls for safe / reproducible processing in controlled environments
2) Advanced mixing equipment for control of polymer and polymer nano-composite structure / dispersion
3) Material characterization to establish processing – structure – property relationships
4) Post extrusion processing of fibers, films, bulk specimens with lab to pilot scale processing equipment
5) Micro-fabrication of polymers and nano-composites with 2D and 3D structures for multi-functionality
5) Macro-fabrication of hybrid nano-composite and continuous fiber reinforced polymer composites
Unique ARL Facilities• Polymer processing facilities to bridge lab and pilot-
scale with six co-located investment areas• Safe handling of large quantities of dry micro- and
nano-particulate powders• High shear melt and solid-state compounding to
design resins, inks, composites that feed fiber, film, and micro-, and macro-fabrication facilities
• Melt and gel spinning of polymer fibers• Melt, gel, and solid state processing of polymer film• Compounding, film, fiber, and composite formation
in clean-room environment with particulate (100,000), temperature (70 °C), and humidity control (to 25% RH)
Complementary Expertise Sought• In-situ diagnostics during polymer processing• Process modeling to predict chemical and structural
evolution during processing• Novel polymeric feed-stocks (chemistries, co-polymers,
multi-component, low entanglement density, etc)
Rigid
Flexible
DGEBA/PACM/D4000 Blends:• Opaque• Macro-phase separated• µm + scale morphology
Unique ARL Developed Materials• Mechanics: Improved impact resistance over
military operational temperature ranges (-55 to 75 °C) with blends of rigid and flexible polymers
• Electronics: Melt processable conductive composites with > 1000 S/cm electrical conductivity
DGEBA/PACM/D2000 Blends:• Optically transparent• Dynamically heterogeneous
(two glass transitions)• 1-10 nm scale morphology
DGEBAD2000
DGEBAPACM
DGEBAD2000
DGEBAPACM
Solid Conductive filler
Melting conductive filler
MAT-FAC1
Advanced Polymer Processing Lab