85
ArchiCAD Training ArchiCAD Training Series Vol. 2 Basic ArchiCAD

AC Training Series Vol 2

Embed Size (px)

Citation preview

Page 1: AC Training Series Vol 2

ArchiCAD Training Series Vol. 2

2-days Basic ArchiCAD 16 Training

ArchiCAD Training Series Vol. 2

Basic ArchiCAD

Page 2: AC Training Series Vol 2

GRAPHISOFT®

Visit the GRAPHISOFT website at http://www.graphisoft.com for local distributor and product availability information.

ArchiCAD Training Series Vol. 2(ArchiCAD 16 International English Metric Version)

Copyright © 2013 by GRAPHISOFT, all rights reserved. Reproduction, paraphrasing or translation without express prior written permission is

strictly prohibited.

TrademarksArchiCAD® is a registered trademark of GRAPHISOFT.

All other trademarks are the property of their respective holders.

CreditsCourtesy of GRAPHISOFT

Page 3: AC Training Series Vol 2

ContentsIntroduction ______________________________________________ 5Opening the project . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Navigation in ArchiCAD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Multiplying Elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Creating Curtain Wall System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Modifying Curtain Walls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Creating Interior Walls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Placing Doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34Mirroring Doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37Creating Stories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40Creating Flat Roofs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42Creating Parapet Walls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43Placing Stairs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44Dimensioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51Automatic Dimensioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54Creating Section Viewpoints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58Elevation Dimensioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60Elevation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61Inserting Background Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62Placing Objects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64Merging Plans. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69Rendering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72Creating 3D Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74Layouting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77Defining Project Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81Exporting to PDF. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

ArchiCADTraining Series Vol. 2 3

Page 4: AC Training Series Vol 2

Contents

4 ArchiCADTraining Series Vol. 2

Page 5: AC Training Series Vol 2

Introduction

IntroductionWelcome to the ArchiCAD Training Series! This Guide is part of the ArchiCAD Training Series, which currently includes the following materials:• Vol. 1, The ArchiCAD BIM Concept• Vol. 2, Basic ArchiCAD• Vol. 3, Intermediate ArchiCAD• Vol. 4, Advanced ArchiCAD• Vol. 5, Using TeamworkYou are now reading Vol. 2, “Basic ArchiCAD” a comprehensive hands-on training to familiarize you with the basic modeling and documentation tools of ArchiCAD. This guide is meant for new ArchiCAD users. We strongly recommend that you complete Training Series Vol. 1 before starting this one.This guide is also suitable for using as BIM Curriculum "Exercises" - for Hands-on Practice in universities where ArchiCAD is taught to students. Lecturers who would like to use this guide as a BIM Curriculum should visit the educational sites of the GRAPHISOFT website (http://www.graphisoft.com/education/curriculum/) where, after registration, they will be entitled to obtain a full set of training materials suitable for seminar lectures.

Contents of this guide:Training guide e-book: The PDF guide includes detailed explanation of every step, with several screenshots. ArchiCAD project file: The pre-set training file will help your learning process. Pre-set project views help you to navigate between different steps thus you can focus on the core knowledge.Movie clips: Narrated movie clips are available on the YouTube channel for GRAPHISOFT ArchiCAD (www.youtube.com/user/Archicad) providing step-by-step instructions for each step of the training guide. The ArchiCAD YouTube Channel can also be accessed from the Help menu of

ArchiCAD Training Series Vol.2 5

Page 6: AC Training Series Vol 2

Introduction

ArchiCAD. Enter the name of this Training Guide in the search field to locate the related videos.You must have ArchiCAD 16 or later version installed on your computer to use this guide. This e-book and the movie clips were made with the English language version of ArchiCAD. For your conveniance we recommend you to download and use the same version for practicing.If you do not have ArchiCAD yet, please visit https://myarchicad.com/ to obtain a free ArchiCAD installer:• If you are a student, a teacher or a representative of a school,

register and download a fully functional Education Version of ArchiCAD for Students and Teachers.

• If you are a professional architect, register and download a fully functional 30-day trial version of ArchiCAD. Projects saved with this TRIAL version can be automatically upgraded to FULL versions upon purchase of a commercial license.

Please contact your local distributor for purchasing commercial ArchiCAD licenses. http://www.graphisoft.com/purchase/How to use this training material?• Install the required ArchiCAD version• Open the PDF Guide• Open the related movie clips from the GRAPHISOFT ArchiCAD

Youtube Channel• Follow the instructions given in the PDF guide and the videos.We hope you will find this training useful and wish you success with your future ArchiCAD projects!Good Luck!

The GRAPHISOFT Team

ArchiCAD Training Series Vol.2 6

Page 7: AC Training Series Vol 2

Opening the project

Opening the projectThe goal of this training material is to quickly make you familiar with ArchiCAD’s basic modelling /documentation techniques and the fundamental project organization concepts. In order to shorten the learning curve we’ll start working with predefined project template files, which already include the required project defaults, object libraries and element attributes.Instead of manually defining every parameter of new elements we’ll use the so-called “Favorites” feature of ArchiCAD. Favorites are preset parameter combinations of ArchiCAD tools, which allow you to store the frequently used building element types in your projects. The project template files used in this training material include the favorites required to complete the modeling steps. Naturally you may also define these parameter combinations manually in the tool setting dialogs. Let’s start modeling by opening the first template file.

1) Double-click the ArchiCAD application icon on your desktop to start ArchiCAD.

7 ArchiCAD Training Series Vol. 2

Page 8: AC Training Series Vol 2

Opening the project

2) The ArchiCAD startup-screen appears, followed by the Start ArchiCAD dialog box, providing various options.

3) In the Set up Work Environment pop-up list, select Standard Profile.Note: ArchiCAD is shipped with three default Profiles: Standard, Visualization and Layouting. These predefined profiles are designed to get you up and running with ArchiCAD. Naturally, you or your office CAD manager can reconfigure these profiles as needed.

4) Select Open a Project and Browse for a Solo Project option, and then click Browse to open an ArchiCAD project file.

ArchiCAD Training Series Vol. 2 8

Page 9: AC Training Series Vol 2

Opening the project

5) Select the 01 Pavilion.pln file in the training project folder and click on the Open button to open the file.

9 ArchiCAD Training Series Vol. 2

Page 10: AC Training Series Vol 2

Navigation in ArchiCAD

Navigation in ArchiCADAt first glance you can see a Slab, a Steel Column, a Section Marker and four Elevation Views in Floor Plan. On the right side of the ArchiCAD interface is the Navigator Palette (Navigator), a tree structure view that lets you build up the entire logical structure of your project and navigate in it. Here you can create folders, then copy, drag and drop views and other project items depending on their particular purpose.

ArchiCAD Training Series Vol. 2 10

Page 11: AC Training Series Vol 2

Multiplying Elements

Multiplying ElementsLet’s see how we can create multiple copies of an element to speed up the modeling workflow.

1) Select the existing Steel Column in the Floor Plan with the Arrow Tool.

2) Select Edit/Move/Mirror a Copy menu command.3) Define the mirroring axis with two clicks, as if you were drawing a

Line.4) Move the cursor near the middle of the Slab’s upper edge, and click

when the cursor takes on the following shape:

(Arrow with Heavy Checkmark).

11 ArchiCAD Training Series Vol. 2

Page 12: AC Training Series Vol 2

Multiplying Elements

5) Draw the mirroring axis, while holding down the Shift key.

6) Pick up the settings of an existing column. With the shortcut ALT+Click, the cursor will change to an Eyedropper; click on the column.

7) Place the two new columns above the Slab.

ArchiCAD Training Series Vol. 2 12

Page 13: AC Training Series Vol 2

Multiplying Elements

8) Select all columns and select Edit/Align/Bottom menu command. All selected elements will be aligned to the bottommost point of the selected group - that is, the bottom column.

9) To ensure the columns are all distributed evenly, select all columns and use Edit/Distribute/Along X command.

10) Select Edit/Move/Mirror a Copy command.

13 ArchiCAD Training Series Vol. 2

Page 14: AC Training Series Vol 2

Multiplying Elements

11) Define the mirroring axis.

12) The first axis point is the middle of the Slab. Draw the mirroring axis, while holding down the Shift key.

13) Open the 3D Window. Press either F3 key or select the Window/3D Window command.

ArchiCAD Training Series Vol. 2 14

Page 15: AC Training Series Vol 2

Creating Curtain Wall System

Creating Curtain Wall SystemThe building is surrounded by a curtain wall system, so we’ll use the Curtain Wall tool to create it.1) Activate the Curtain Wall tool.2) Double-click CurtainWall from the Favorites palette.

Note: Favorites allow you to save your preferred tool configurations for later use. This way you can access your most frequently used building elements with just one click.

3) Choose the Polyline - Single Geometry Method from the Info Box.

4) You have to place the Curtain Wall 6000mm from the left side of the Slab.

15 ArchiCAD Training Series Vol. 2

Page 16: AC Training Series Vol 2

Creating Curtain Wall System

a) Move the cursor to the upper-left corner of the Slab.

b) Type x6000+ and the cursor jumps to the correct position.

ArchiCAD Training Series Vol. 2 16

Page 17: AC Training Series Vol 2

Creating Curtain Wall System

c) Press Enter, move the cursor down, and click when the cursor takes on the following shape: Pencil point with perpendicular sign.

d) Click with the Sun cursor to define the “outside” direction of the Curtain Wall. Here, move the cursor to the left side of the Curtain Wall and click.

17 ArchiCAD Training Series Vol. 2

Page 18: AC Training Series Vol 2

Creating Curtain Wall System

e) In the appearing Place Curtain Wall dialog box, modify the height of the Curtain Wall to 3000mm and click Place.

f)Create the other three Curtain Walls with the same method.

ArchiCAD Training Series Vol. 2 18

Page 19: AC Training Series Vol 2

Modifying Curtain Walls

Modifying Curtain WallsThe unnecessary Mullions should be removed from the Curtain Wall.1) Select the Curtain Wall in Floor plan with the Arrow tool.2) Then click the Edit in 3D button, which appears on the selected

Curtain Wall. Another way to enter Edit mode: select the Curtain Wall, then the Design/ Modify Curtain Wall/Edit System command.

3) When the Curtain Wall is in editing mode, the model is shown in the 3D window.

19 ArchiCAD Training Series Vol. 2

Page 20: AC Training Series Vol 2

Modifying Curtain Walls

4) Select the middle Mullion frame and delete it.

5) Drag the Mullion frame.a) Select the Mullion frame and drag it with the mouse.

ArchiCAD Training Series Vol. 2 20

Page 21: AC Training Series Vol 2

Modifying Curtain Walls

b) Click when the cursor’s shape indicates it is at the halfway point of the Boundary frame (Arrow with Heavy Checkmark).

6) Create a new Mullion frame.a) Double-click on Mullion Frame in the Favorites palette.b) Move the cursor to the middle of the Boundary frame. c) Draw the Frame upside down while holding down the Shift key.

21 ArchiCAD Training Series Vol. 2

Page 22: AC Training Series Vol 2

Modifying Curtain Walls

7) Delete the Frame which is on the right side of the Panel.

8) Replace the middle Panel with a Door.a) Select the middle Panel.

ArchiCAD Training Series Vol. 2 22

Page 23: AC Training Series Vol 2

Modifying Curtain Walls

b) Double-click on CW Door 2 in the Favorites palette.

9) When you have completed your modifications of the selected Curtain Wall, click OK in the Edit mode Display palette to save changes and return to the 3D window.

23 ArchiCAD Training Series Vol. 2

Page 24: AC Training Series Vol 2

Modifying Curtain Walls

10) Delete the unnecessary Mullion frames of the other three sides, as shown in the pictures.

ArchiCAD Training Series Vol. 2 24

Page 25: AC Training Series Vol 2

Modifying Curtain Walls

25 ArchiCAD Training Series Vol. 2

Page 26: AC Training Series Vol 2

Creating Interior Walls

Creating Interior WallsContinue working on the current project or open 02 Pavilion.pln ArchiCAD file from the training project folder.Let’s place the partition walls to create the rooms of the building.1) Select the Wall tool from the Toolbox.2) Double-click on Wall 200 from the Favorites palette.

3) Set the Geometry Method to Rectangular and the Construction Method to Left (reference line is in the left side).

4) The corner of the new Wall will be 10.500 mm from the left edge of the Slab and 3.400 mm from the bottom of the Slab.

5) Move the cursor to the bottom-left corner of the Slab.

ArchiCAD Training Series Vol. 2 26

Page 27: AC Training Series Vol 2

Creating Interior Walls

6) Type the following: x10500+. (Cursor jumps to the right.)

7) Type y3400+. The cursor immediately snaps upwards.

8) Press Enter and move the cursor toward the upper right.

27 ArchiCAD Training Series Vol. 2

Page 28: AC Training Series Vol 2

Creating Interior Walls

9) Define the size of the rectangular wall: x7600 and y3600.

10) Press Enter.

ArchiCAD Training Series Vol. 2 28

Page 29: AC Training Series Vol 2

Creating Interior Walls

11) You have to edit these walls separately. The solution is to temporarily suspend groups by choosing the Suspend Group toggle icon in the Standard Toolbar, or use the Edit/Grouping/Suspend Groups command.

12) Activate the Arrow tool and select the upper horizontal Wall. Click on the upper side of the Wall and drag it downwards. Hold down the Shift key to constrain mouse movement vertically.

13) Define the distance of offset: r800, then press Enter.

29 ArchiCAD Training Series Vol. 2

Page 30: AC Training Series Vol 2

Creating Interior Walls

14) Do the same with the other horizontal Wall.

15) Double-click on Wall 100 in the Favorites palette.

16) Choose Single Geometry Method and Center Construction Method (reference line is in the middle) in the Info Box.

ArchiCAD Training Series Vol. 2 30

Page 31: AC Training Series Vol 2

Creating Interior Walls

17) Create the new walls so that they divide the existing horizontal wall into three equal segments. Let’s set the Special Snap Points to display divisions along elements. Select View/Special Snap Options/Division(3) from Menubar.

31 ArchiCAD Training Series Vol. 2

Page 32: AC Training Series Vol 2

Creating Interior Walls

18) Draw two walls; the cursor will show you the trisecting points.

19) As a final step, we need to erase the middle part of the bottom horizontal wall.a) Hold down the Ctrl/Cmd key and the cursor changes to Scissors.

ArchiCAD Training Series Vol. 2 32

Page 33: AC Training Series Vol 2

Creating Interior Walls

b) Click on the middle part of the Wall.

33 ArchiCAD Training Series Vol. 2

Page 34: AC Training Series Vol 2

Placing Doors

Placing DoorsNow we’ll create doors in the partition walls.1) Activate the Door tool and select Internal Door from the Favorites

palette.

2) Set the Anchor Point to Side. The Anchor Point setting defines whether you place the Door by its center point or its side.

3) You have to place the Door 100mm from the bottom-left corner of the wall. Move the cursor to the bottom-left corner and type x100+.

ArchiCAD Training Series Vol. 2 34

Page 35: AC Training Series Vol 2

Placing Doors

4) Press Enter.5) To place the Door, click at the desired wall edge.6) Then click a second time to define the swing direction of the Door.

35 ArchiCAD Training Series Vol. 2

Page 36: AC Training Series Vol 2

Placing Doors

ArchiCAD Training Series Vol. 2 36

Page 37: AC Training Series Vol 2

Mirroring Doors

37 ArchiCAD Training Series Vol. 2

Mirroring DoorsLet’s create mirrored copies of the door.1) To be able to mirror the Door, first you have to set View/Special

Snap Options back to Half.

2) Select the Door with the Arrow tool.3) Activate the Edit/Move/Mirror a Copy command.

Page 38: AC Training Series Vol 2

Mirroring Doors

4) Move the cursor near the middle of the upper Wall, and click when the cursor takes on the following shape:

ArchiCAD Training Series Vol. 2 38

Page 39: AC Training Series Vol 2

Mirroring Doors

39 ArchiCAD Training Series Vol. 2

Page 40: AC Training Series Vol 2

Creating Stories

Creating StoriesContinue working on the current project or open 03 Pavilion.pln ArchiCAD file from the training project folder.Stories are fundamental parts of all ArchiCAD projects. Let’s see how to create them.1) Go to Design/Story Settings.2) Select Ground Floor and click on the Insert above command.3) Modify the Story Name to Roof.

4) Click OK.5) Select the Ground Floor from the Navigator and right-click to bring

up its context menu.

ArchiCAD Training Series Vol. 2 40

Page 41: AC Training Series Vol 2

Creating Stories

6) Choose Show as Trace Reference.Note: Trace Reference allows you to display different model views or layouts in the context of the active view. This feature helps you to check the consistency of your documentation and your model.

7) You can see the Elements of the Ground Floor in the Roof story.

41 ArchiCAD Training Series Vol. 2

Page 42: AC Training Series Vol 2

Creating Flat Roofs

Creating Flat RoofsWe’ll model the flat roof of the pavilion using the Slab tool.1) Activate the Slab tool.2) Select Flat Roof from the Favorites palette.3) Create the Flat Roof with the Magic Wand:

a) Hold down the Space key and the cursor changes to the Magic Wand.b) Click on the inside of the Ground Floor’s Slab.

ArchiCAD Training Series Vol. 2 42

Page 43: AC Training Series Vol 2

Creating Parapet Walls

Creating Parapet WallsWe’ll use profiled walls to model the Parapet Walls of the flat roof. The profile of the Parapet Wall has already been defined in the default project template file with the Profile Manager. (The use of the Profile Manager is explained in the Advanced ArchiCAD Training Guide.)1) Select the Wall tool.2) Double-click on Parapet Wall in the list of Favorites.3) Set the Reference line of the Wall to Right.4) Hold down the Space key and when the cursor changes to the Magic

Wand, click on the inside of the Ground Floor’s Slab.

43 ArchiCAD Training Series Vol. 2

Page 44: AC Training Series Vol 2

Placing Stairs

Placing StairsLet’s create a simple straight-run stair with StairMaker, the built-in stair-modeling tool of ArchiCAD.1) Double-click on the Ground Floor in the Navigator palette.2) Open the Stair dialog box from the Toolbox.3) Select the Create Stair command.

ArchiCAD Training Series Vol. 2 44

Page 45: AC Training Series Vol 2

Placing Stairs

4) In the appearing dialog box set the type of the Stair to Straight Run and click on the OK button.

5) Set the following values:a) Total height is 1500mm; Flight width is 3500mm; Full length is 2500mm.

45 ArchiCAD Training Series Vol. 2

Page 46: AC Training Series Vol 2

Placing Stairs

b) Structure type is Treads only.

c) Upper surface material: Stn-Marble White; Front surface material: Paint 01; Tread surface material: Paint 01.

ArchiCAD Training Series Vol. 2 46

Page 47: AC Training Series Vol 2

Placing Stairs

d) Railing type: No Railings.

47 ArchiCAD Training Series Vol. 2

Page 48: AC Training Series Vol 2

Placing Stairs

e) Finally, you have to define the type of the 2D View.

ArchiCAD Training Series Vol. 2 48

Page 49: AC Training Series Vol 2

Placing Stairs

6) If you have completed the above tasks, click Save As to give it a name: Pavilion Stair. The Stair is saved in your Embedded Library.

7) Double-click on the Stair tool and select the Pavilion Stair.8) Move the cursor inside the Preview Area: the cursor changes to a

“rotate” arrow. Rotate the 2D Symbol to the required position. Define the primary hotspot of the Stair; this will be its left-upper point.

49 ArchiCAD Training Series Vol. 2

Page 50: AC Training Series Vol 2

Placing Stairs

9) Modify the Relative Base Height to -1500 mm.

10) The Anchor point of the Stair is 2000 mm from the bottom-left corner of the Slab. Move the cursor to the corner and type x2000+. The cursor jumps to the appropriate position.

11) Press the Enter key.

ArchiCAD Training Series Vol. 2 50

Page 51: AC Training Series Vol 2

Dimensioning

DimensioningContinue working on the current project or open 04 Pavilion.pln ArchiCAD file from the training project folder.We’ll add basic wall dimensions to the project on the floor plan.1) Choose the Dimension Tool from the Toolbar.2) Select Dim (2.5) from the Favorites palette.

3) Set the Geometry Method to X-Y Only in the Info Box.

4) Click on the upper-left corner of the vertical wall, then the bottom-right corner of the other vertical wall. You can see two reference points.

51 ArchiCAD Training Series Vol. 2

Page 52: AC Training Series Vol 2

Dimensioning

5) In order to finish the dimensioning you have to double-click on an empty space area.

6) The next step is to move the Hammer cursor to the position where you want to place the dimension line.

7) Click on the side of the vertical walls. Two reference points will appear on each wall.

ArchiCAD Training Series Vol. 2 52

Page 53: AC Training Series Vol 2

Dimensioning

8) Double-click on an empty space and move the Hammer cursor to the position where you want to place the dimension line.

53 ArchiCAD Training Series Vol. 2

Page 54: AC Training Series Vol 2

Automatic Dimensioning

Automatic DimensioningAutomatic dimensioning is a very powerful tool that allows you to apply the most typical dimensions on the floor plan views with only a few clicks.1) Select all Walls:

a) Activate the Wall tool.b) Choose Edit/Select All Walls command.

2) Click on Document/Document Extras/Automatic Dimensioning/Exterior Dimensioning command.

ArchiCAD Training Series Vol. 2 54

Page 55: AC Training Series Vol 2

Automatic Dimensioning

3) Define the appropriate preferences for the dimensioning.

4) Click OK.5) Define the direction of the dimension lines. You can do this in one

two ways:a) Click the side edge of an existing Wall (the dimension direction will follow the Wall direction);b) Click in an empty area, and then click a second time to define the dimension direction.

55 ArchiCAD Training Series Vol. 2

Page 56: AC Training Series Vol 2

Automatic Dimensioning

6) Click with the Hammer cursor to place the dimension lines.

7) Delete the unnecessary dimension lines.8) Insert new Dimension points:

a) Select the Dimension line with the Arrow tool.b) Then, with the Dimension Tool selected, Ctrl/Cmd-click on the desired new Reference Point. The new point can be located between existing chain points or anywhere outside the dimension chain.

9) Create new Dimensions to the Slab and the Stair.

ArchiCAD Training Series Vol. 2 56

Page 57: AC Training Series Vol 2

Automatic Dimensioning

10) The final result should be similar to the one in this picture.

57 ArchiCAD Training Series Vol. 2

Page 58: AC Training Series Vol 2

Creating Section Viewpoints

Creating Section ViewpointsCreating new section markers and section views is easy with ArchiCAD’s Section Tool.1) Activate the Section tool.2) Set the Horizontal Range to Infinite Depth and choose the Single

Geometry Method from the Info Box.

3) Click twice to define both ends of the Section.4) Click on the right side of the line with the eyeball cursor to set the

orientation of the Section.

ArchiCAD Training Series Vol. 2 58

Page 59: AC Training Series Vol 2

Creating Section Viewpoints

5) Open the New Section from the Navigator palette. The new Section viewpoint is created and listed automatically in the Navigator Project Map.

59 ArchiCAD Training Series Vol. 2

Page 60: AC Training Series Vol 2

Elevation Dimensioning

Elevation DimensioningElevation Dimensions allow you to place height markers in Section/Elevation/IE and 3D Document windows.1) Define the necessary preferences for the dimensioning in the Info

Box.

2) Activate S/E Dim. (2.5) from the Favorites palette.

3) Place individual markers by clicking the points that you want to dimension, then Double-click or click OK in the Control Box. Use the Hammer cursor to position the marker.

ArchiCAD Training Series Vol. 2 60

Page 61: AC Training Series Vol 2

Elevation

ElevationWorking with Elevations is very similar to Sections. The process is explained in the previous chapter.1) Open the South Elevation View from the Navigator palette.

61 ArchiCAD Training Series Vol. 2

Page 62: AC Training Series Vol 2

Inserting Background Images

Inserting Background ImagesWe can improve the elevation view by adding a realistic background image behind it.1) Double-click on the Figure tool.2) Click the Open button to browse the directory system for image

files. Select Sky_cloudy2_photo.jpg file from the ArchiCAD Library/ [BImg] Background Images / Photos 1024x768 folder.

3) Set the bottom-left Anchor point.4) Click OK.

5) Place the Figure with a single click.

ArchiCAD Training Series Vol. 2 62

Page 63: AC Training Series Vol 2

Inserting Background Images

6) Resize the image by using the Pet palette.

63 ArchiCAD Training Series Vol. 2

Page 64: AC Training Series Vol 2

Placing Objects

Placing ObjectsArchiCAD is shipped with an extensive parametric object library, which helps you to quickly improve your model and documentation. Let’s place a few tree objects on the elevations.1) Open the Object Default Settings by double-clicking on the Object

tool.2) Browse for a Tree object from the linked library. There are two ways

to do it:a) Select the tree object from the ArchiCAD Library /Basic Library /1.7 2D Elements / Plant Symbols folder.b) Choose the Find Library Parts option to locate library parts by name using keywords in a search engine. Type the “tree” keyword and press the Find button.

c) Select the preferred Tree object.

ArchiCAD Training Series Vol. 2 64

Page 65: AC Training Series Vol 2

Placing Objects

3) Click on the left-bottom Anchor point of the Object, then click OK.4) Place the tree object in the Elevation View.5) You have to position the tree object behind the building. To do this,

you must change the display order of the object.6) Select the object.

a) Option 1: Choose the Edit/Display Order/Send Backward command. You may have to run this command twice to achieve the appropriate result.

65 ArchiCAD Training Series Vol. 2

Page 66: AC Training Series Vol 2

Placing Objects

b) Option 2: Right-click to bring up the element’s context menu, then select the Display Order/Send Backward command twice.

ArchiCAD Training Series Vol. 2 66

Page 67: AC Training Series Vol 2

Placing Objects

7) Create a copy of the tree object. Activate either the Edit/Move/Drag a Copy command or use Ctrl+Shift+D(Windows)/Cmd+Alt+D(Mac) shortcuts.

67 ArchiCAD Training Series Vol. 2

Page 68: AC Training Series Vol 2

Placing Objects

8) Replace the type of the tree: double-click on the Object tool and select another tree object from the folder.

9) Place the new 2D People Symbols in the Elevation View.

ArchiCAD Training Series Vol. 2 68

Page 69: AC Training Series Vol 2

Merging Plans

Merging PlansThe furniture layout is already available in an external ArchiCAD module file. We’ll merge it into our project to shorten the documentation and modeling time.

Note: You can learn more about ArchiCAD modules in other volumes of this training guide series.

10) Activate the Ground Floor view from the Navigator palette.11) Select File/File Special/Merge command.

69 ArchiCAD Training Series Vol. 2

Page 70: AC Training Series Vol 2

Merging Plans

12) Browse for the Furnishing_Plan.mod file and click Open.

13) Until the file is placed, its elements will be surrounded by a dashed rectangle. Click within the rectangle to move the elements to the desired position. Click outside or click OK from the context menu (or the Control Box) to place the elements.

ArchiCAD Training Series Vol. 2 70

Page 71: AC Training Series Vol 2

Merging Plans

71 ArchiCAD Training Series Vol. 2

Page 72: AC Training Series Vol 2

Rendering

RenderingArchiCAD offers you various visualization modes to present your design to your customers. You can select from two predefined Rendering Settings from the Navigator palette: the first uses the LightWorks Rendering Engine, while the second works with the Sketch Engine.

ArchiCAD Training Series Vol. 2 72

Page 73: AC Training Series Vol 2

Rendering

73 ArchiCAD Training Series Vol. 2

Page 74: AC Training Series Vol 2

Creating 3D Documents

Creating 3D DocumentsThe 3D document is a unique ArchiCAD feature that presents your models with annotations in a 3D perspective or axonometric view. The 3D Document allows you to use the 3D view of the model as the basis for creating a document, to which you can add dimensions, labels and additional 2D drawing elements.1) Open the 3D-01 Document from the Navigator palette.

ArchiCAD Training Series Vol. 2 74

Page 75: AC Training Series Vol 2

Creating 3D Documents

2) Select the Dimension tool.3) Activate Dim (2.5) from the Favorites palette.4) Set the position of the Text to Top.

5) Choose the Dimension Plane from the Info Box:a) Horizontal, Vertical, Free Plane

6) Set the Geometry Method:a) X-Y Only, Any Direction

75 ArchiCAD Training Series Vol. 2

Page 76: AC Training Series Vol 2

Creating 3D Documents

7) Place individual markers by clicking the points that you want to dimension, then Double-click or click OK in the Control Box. Use the Hammer cursor to position the marker.

ArchiCAD Training Series Vol. 2 76

Page 77: AC Training Series Vol 2

Layouting

LayoutingContinue working on the current project or open 05 Pavilion.pln ArchiCAD file from the training project folder.The final documentation layouts are available in the Layout Book. Let’s see how to complete your documentation in ArchiCAD.1) Activate the Navigator’s Layout Book.2) Double-click on the A.01 Pavilion Layout.

3) Switch to the Navigator View Map, which is the second button in the Navigator palette.

77 ArchiCAD Training Series Vol. 2

Page 78: AC Training Series Vol 2

Layouting

4) Drag the 0. Ground Floor from the Floor Plans folder and drop it onto the Layout.

5) Modify the placed layout by using the Pet palette. Move the layout to the upper-right corner.

ArchiCAD Training Series Vol. 2 78

Page 79: AC Training Series Vol 2

Layouting

6) If you do not want to place the drawings one by one, select the Show Organizer command from the Project Chooser at the top left of the Navigator.

7) Choose the View Map in the left side of the Navigator and the Layout Book in the right side.

8) Select each Elevation in the View Map and drag them into the A.01 Pavilion Layout.

79 ArchiCAD Training Series Vol. 2

Page 80: AC Training Series Vol 2

Layouting

9) Place the other drawings (Sections, Roof, Rendering) onto the Layout and arrange them into the correct position.

ArchiCAD Training Series Vol. 2 80

Page 81: AC Training Series Vol 2

Defining Project Info

Defining Project InfoArchiCAD can automatically display Project Info data on all sheets of the layout book. This solution will significantly reduce the time spent on project documentation.1) Open the File/Info/Project info dialog box, which contains the most

important information about your project.

81 ArchiCAD Training Series Vol. 2

Page 82: AC Training Series Vol 2

Defining Project Info

2) If you fill in these fields with the necessary data, the text on the layouts will change automatically.

ArchiCAD Training Series Vol. 2 82

Page 83: AC Training Series Vol 2

Exporting to PDF

Exporting to PDFThe project documentation can be published in many file formats with just one click of the mouse. PDF is the most widely use document archiving format in the construction industry, so let’s see how to export to this format.1) Open the Organizer dialog box from the Project Chooser at the top

left of the Navigator.2) Click on Publisher Sets to the right side of the Navigator.

3) Choose the 3 - Pavilion Publisher Set from the list.

4) Select the A.01 Pavilion Layout from the Layout Book and click Add Shortcut.

5) Define the output format. Files can be saved in a large variety of formats, including all standard image formats and CAD exchange formats. Select PDF file format.

83 ArchiCAD Training Series Vol. 2

Page 84: AC Training Series Vol 2

Exporting to PDF

6) Click on the Publish button.

Congratulations!You have succesfully completed this Training Guide! We hope that you have learnt many new and exciting things about the possibilities of BIM and understood how ArchiCAD supports the architectural design workflow. Please check the other volumes of this training series for more details about ArchiCAD.Should you have any questions regarding ArchiCAD or other GRAPHISOFT products, please visit ArchiCADwiki, our online knowledge base: http://archicadwiki.comPlease feel free to contact GRAPHISOFT and its worldwide partners with further questions at www.graphisoft.com.We look forward to seeing you in the ArchiCAD user community.The GRAPHISOFT Team

ArchiCAD Training Series Vol. 2 84

Page 85: AC Training Series Vol 2

Exporting to PDF

85 ArchiCAD Training Series Vol. 2