AIRLINE CONNECTIONS: Most Major Airlines into Phoenix Sky Harbor Airport. Private Aircraft can land at Falcon Field Airport, Identifier is FFZ.

1240 Royal Drive • Papillion, NE 680464901 E. Falcon Drive • Mesa, AZ 85215

(402) 592-1933 • (480) 396-0380www.starmanauctions.com

TWO DAYS ~ TWO OWNERS

Friday & Saturday • June 1st & 2nd 2012Starting at 9:00 A.M. Both Days!

AIR RESPONSE & ESTATE OF SAM KORTH4949 East Falcon Drive ~ Falcon Field Airport ~ Mesa, Arizona

ABSOLUTE AUCTION

OPEN HOUSEThursday, May 31st

from 9:00 A.M.

to 5:00 P.M.

Sale Site Phone: (480) 844-0800 or Steve Starman (402) 681-6456

~ HOTELS ~Windemere Hotel

(480) 985-3600Best Western Superstition

(480) 647-1164Arizona Golf Resort

(480) 832-1661Country Inn & Suites

(480) 641-8000

Phoenix Marriott Mesa (480) 898-8300

Best Western Mezona (480) 834-9233

Holiday Inn (480) 964-7000

Fairfield Inn (480) 829-0700

Days Inn (480) 981-8111

LaQuinta (480) 844-8747Best Western (480) 964-8000

Extended Stay America (480) 632-0201

H H H H H H H H H H H H H H H H H H H H H H H H H

H H H H H H H H H H H H H H H H H H H H H H H H H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

(2) 36" Tripod Aircraft Jacks, 10 Ton(2) 36" Tripod Aircraft Jacks, 5 Ton(2) Columbus 20 Ton 72" Tripod

Aircraft Jacks(3) Regent 25 Ton 54" Tripod

Aircraft Jacks

H H H FLYING AIRCRAFT & PROJECTS H H H

Beech 18 Airframe

Fuselage & Wings on Gear, No Engines, Avionics, Instruments, or Control Surfaces. No Logs or Bill of Sale.

2004 Korth CubbyN-488SK, S/N 67035 Hrs. Total TimeEngine: Lycoming O-290-D, 35

Hrs. S.M.O.H. by Lycoming in 2004 w/Ellison Injector Carburetor

Last Condition Inspection Done 4/12/12. Aircraft Has Float Fittings & Pump for Amphibious Floats. Aircraft is in Very Good Condition

1980 Cubby Standard Sport Trainer

N-8027T, S/N 274829 Hrs. Total TimeEngine: Continental O-200-A, 829 Hrs.

S.M.O.H.Aircraft is Together and Complete but Will

Require an Inspection and Sign-Off or Ferry Permit to Fly Out.

1991 Questair VentureN-48Y, S/N 18990 Hrs. Total TimeEngine: Continental IO-550-G1B,

990 Hrs. T.T.Prop: McCauley, 990 Hrs. T.T.Aircraft has Not Flown Since

October of 2005 (at which time it went through a 100 Hr. Inspection)

Roto Way RW-133 Executive Helicopter

This Helicopter is a Kit that is Approx. 45-50% Completed. It appears that everything is there to complete it to include the Engine that is already installed and Main Rotor Blades.

Zlin Mdl. Z-526A AircraftN-7PL, S/N 1037Aircraft Has an Experimental Exhibition

Airworthiness Certificate. Aircraft is Complete and Together, However at this time, we have not located the Log Books. If you are Interested in This Aircraft, Call ahead to see if Logs have been Located. Aircraft has Letadlory M-137-SH Motor.

Piper J-3 Cub ProjectThis Aircraft has been Completely Disassembled

and will need to be Totally Redone from the Ground Up. It Appears that Almost All Parts are There with a Continental A-65 Engines. Log Books and Bill of Sale are There.

Lockheed PV-2 Aircraft

Aircraft is Together and Complete with R-2800-13 Engines. Aircraft is Being Sold with No Log Books or Bill of Sale. Parts Plane, No Boom Doors.

H H RAMP EQUIPMENT H H H H AIRCRAFT JACKS H H(2) B-1 Maintenance StandsRandall Mfg. Co. Mdl. PT-1 Engine

Pre-Oiler Pickler

B-4 Maintenance Stand(3) 5,000 Lb. Pallet Jacks

H H H HAND TOOLS H H H6-Pc. Micrometer SetSeveral Outside Micrometers, 1"-

2", 2"-4", 5"-6"Magnaflux ED-520 Eddy Current

TesterCamtor Hole Measuring ToolPacific Scientific Cable

TensiometersStarrett & Mitutoyo Depth Gauges

(10) Snap On & Craftsman Torque Wrenches

Intercomp Digital Read-Out Spring Tester

Several Veneer CalipersEastern & Misc. Magneto

SynchronizersTime Rite IndicatorsBendix High Tension Lead Testers

Several Sunnen HonesSeveral Cylinder Ball HonesDana Mdl. 5100AF Digital

MultimeterValhalla Scientific Mdl. 4440 Digital

Multimeter CounterSeveral Simpson MultimetersParker Beading Tools

PROP TABLES& TOOLING

(2) 12' Prop Working TablesGood Selection of 30, 40, 50 & 60

Spline MandrelsMarvel 5180-329-6150 Prop Balancing

KitMarvel Mdl. 7HEL054 Main Rotor

Balancing KitMarvel Mdl. 7A050 Prop Balancing KitMarvel Mdl. 7A100 Prop Balancing KitMarvel Mdl. 7A100-V87-K-53210C

Prop Balancing KitKellstrom Mdl. H.S.P.-1733 Portable

Prop Test StandProp Blade Balancing StandsProp Blade Grinder/PolisherHamilton Standard Prop Tools

Include Turning Bars, Spanner Wrenches, Prop Mandrels, Dome Wrenches, Prop Nut Wrenches, Blade Paddles, Drivers, Removers, Installers, Etc. Good Selection

Hose Mandrels, Heat Guns, Several Nicropress Tools, Tubing Benders, Pneumatic Drills, Right Angle Drills, Rivet Hammers, Die Grinders, Rivet Squeezers, Bucking Bars, Rivet Cutters, Several Cordless Drills Including Ryobi and Black & Decker, Tap & Die Sets, Tubing Flaring Kits, Aviation Snips, Large Selection of Socket Sets to Include ¼", 3/8" & ½" Drive, Standard, Deep Well & Metric; Ratchets, Breaker Bars, Large Selection of Combination Wrenches, Box End Wrenches Includes Craftsman & Some Snap-On and Misc. Others, Stubby Combination Wrench Sets, Allen & T-Handle Wrenches, Punches, Chisels, Several Sets of Screwdrivers, Rivnut Tool Sets, Angle Wrenches, L&R Quantrex 70 Ultrasonic Cleaner, Pneumatic Strut Pump, Whitney Hole Punch Set, Kroy Tube Marker 600 for Shrink Tubes, Files, Circuit Specialists Mdl. CSI-530S Regulated DC Power Supply, Chicago Electric Double Cut Saw, CSI Mdl. Station 1A Soldering Station, Electric Drills & Saws, Several Hammers Including Claw, Ball Peen, Dead Blow, Etc., Paint Guns, and Several Others. Large Selection of Hand Tools

(2) Malabar 25 Ton 54" Tripod Aircraft Jacks

(2) Ward Aero 36" Aircraft Jacks(2) Jack House High Wing Aircraft

JacksSeveral Other Military Tripod

Aircraft Jacks, Various Sizes

Nissan Mdl. NFG103 Forklift, 3,000 Lb. Propane, 12' Dual Stage Mast, Pneumatic Tires

Coleman Type A/S 32U-18 Aircraft Tow Tractor, 18,000 Lb. Draw Bar Pull

H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H

H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

16" Pedestal Disc Sander, 1-HPStarter Prony BrakeRigid Portable Air Compressor w/Honda 5.5 HP Gas EngineNose Case Build-Up Stand w/Changeable Spline AdaptersSouthbend Mdl A Precision Lathe, 9" Swing, 34" Bed, 20" Between Centers,

Various ToolingCraftsman 10" & 8" Table SawsPexto Mdl 137-K 37" Sheet Metal Shear, 16 Gauge Soft SteelWeaver Horizontal Air Compressor, 1-HP Single Stage, 25 Gal TankColeman Powermate Vertical Portable Air Compressor, 27 Gal Tank, 5-HP,

7.5 CFM @ 40 PSI, and 5.7 CFM @ 90 PSICentral Pneumatic Pancake Air Compressor, 3-Gal, 100 PSICoats 10-10 Tire Bead Breaking Machine(2) AC Spark Plug Cleaner/TestersMagnaflux Black Light KitSweeny Torque Wrench TestersRevere Type MB-1 Electronic Aircraft Scales, (3) 10,000 Lb. Load Cells(3) Black & Decker Aircraft Load-O-Meter Aircraft Scales, 15,000 Lb.Electric Parts Washer(3) Oxygen Acetylene Torch Sets2-Ton Engine HoistSeveral Rotating Engine Build-Up StandsHand Operated Hydraulic Test StandNitrogen Cart & GaugesExcel 2600 PSI Pressure Washer w/Honda 5-HP MotorWilton 2" Belt Sander1 & 2 Ton Floor JacksSeveral Bench Vices & GrindersAccu-Matic Automatic Horizontal Band SawMagnetic Re-ChargerEnco 14" 2-Speed Band Saw

Duracraft Belt & Disc SanderCraftsman Belt SanderTruck Mounted Engine Test Bed, Needs WorkMerriam Mdl D-20053 Injection Carburetor Flow Bench, Needs WorkSeveral Stepladders, Fiberglass & Aluminum, 5', 8', & 12'

Lagun Republic Vertical Milling Machine Mdl FTV-2, 2-HP, 48" x 9" 3-Slot Table w/Auto Feed, Heidenhain XYDRO, Kurt Automatic Power Draw Bar

Landa Mdl PW-200 Hot Water Parts Cleaning System 28-1/2" Rotating Basket w/Skimmer

Clausing Mdl 4914 Engine Lathe, Quick Change, 4' Bed, 9" Swing, 1" Hollow Spindle w/Various Tooling, S/N 402763

Leten Mdl LCM-450 Horizontal Band Saw, 18" Throat w/Blade Welder, 19" x 23" Tilting Table

Large Vertical Radial Engine Cylinder Honing Machine w/Various Sunnen Hones

Pacific Airmotive Corp. Mdl PAC-173 Valve Guide Honing Machine for Curtis Wright Cylinders

Sioux Mdl 2001 Wet Valve Face Grinder w/Rocker Arm AttachmentSioux Cat #682 Wet Valve Face Grinder w/Various Heads(2) Sioux Mdl 1680 Wet Cylinder Working Tables w/Stone Dressers(3) Sioux Angle Head Valve Seat Drivers w/StonesCurtis Wright 1820 Crankshaft Build-Up & Disassembly Fixture w/Most

ToolingCurtis Wright 2600 Crankshaft Build-Up & Disassembly FixtureFamco #4 Arbor PressSheldon No. 3 Arbor PressCarolina 20 Ton H-Frame PressWeidenhoff Mdl 341 Magnetic Test Stand, 1,000-5,000 RPMSnap On YA4224 Bead Blast Cabinet, 42" W x 24" D x 28" TICM Bead Blast Cabinet, 47" W x 27" D x 28" TMansur System One Mdl 500 Electric Parts CleanerUniversal Radial Engine Connecting Rod Alignment Fixture50-Spline Nose Shaft StandUniversal Piston Ring Checking FixtureEmco Mdl FB-2 Vertical Milling Machine, 24" x 6" 3-Slot Table, 145-2,400

RPM Spindle Speed w/CBX DRO X & YMaximat Mdl V-10 Bench Top Lathe, 37" Bed, 25" Between Centers, 9"

Swing, 60-2,500 RPM Spindle Speed w/Tapper AttachPower Kraft Bench Top Lathe, Belt

Driven Speed Change, 42" Bed, 10" Swing w/Various Tooling

Atlas Clausing Mdl 6307 Lathe, 48" Bed, 12" Swing w/Tapper Attach & Various Tooling S/N 2-2583

(2) Cylinder Tear Down Stands, Foot Operated

Cylinder Tear Down Stand, Air OperatedCraftsman 20" Floor Mdl Drill Press,

12-Speed, ¾" Chuck, 2-HP

H H H SHOP EQUIPMENT H H H H H CURTIS WRIGHT & H H P&W ENGINE TOOLS

(200+) Magneto Cores: American Bosch & Bendix ScintillaGood Selection of Magneto Inventory including Blocks, Coils, Cases, Etc.

(150) Starter Cores: Jack & Heinz & Bendix Eclipse, Majority are Jack & HeinzFuel Pumps: Very Large Selection Including Several 400 & 700 GPM Fuel Pumps, Fuel Boost Pumps, (Thompson) Fuel Shut-Off Valves, Pesco Fuel

Pumps & Motor Assys.(200) Prop Governors: Majority are Hamilton Standard

(50) Round Oil Coolers: Various Sizes (50) Carburetors: Bendix Stromberg PD-12’s & Misc. Others

(20) Generators: P-1’s, P-2’s & Misc. Others(150) Tach Generators: All Types & Models(100) Hydraulic Pumps: Vickers & Others

Large Selection of Curtis Wright Oil Pumps

Very Large Selection of Curtis Wright 1820 & 2600 Engine Tools Including Guide Reamers, Cylinder Working Tools, Cylinder Base Wrenches, Intake Wrenches, Prop Bars, Lifting Eyes, Ring Compressors, Gear Pullers, Drivers, Installers, Removers, Go-No-Go Gauges, Push Rod Tools, All Types of Reamers, Etc.

Good Selection of P&W 1830 & R-2000 Tooling

H H H FLOATS H H H

Set of Experimental Amphibious Floats for the Cubby

H RADIAL ENGINE CORES HCurtis Wright R-1820-86 Engine,

Military Overhaul(4) Curtis Wright R-1820-84C Engine

Cores(5) Curtis Wright R-1820-82C Engine

Cores(2) Curtis Wright R-1820-76D Engine

CoresCurtis Wright R-1820-80B Engine

CoreCurtis Wright R-1820-86B Engine

CoreCurtis Wright R-1820-86A Engine,

DisassembledCurtis Wright R-1820-80A Engine

Core, Some DamageCurtis Wright R-1820-97 Engine Core,

DisassembledCurtis Wright R-2600-29 Engine CoreCurtis Wright R-2600-35 Engine Core(3) Curtis Wright R-3350 Engine

Cores

(3) P&W R-2000 Engine Cores(2) P&W R-2000 PineapplesCurtis Wright R-1820-C-102 Engine

CoreCurtis Wright R-2600-13 Engine CoreContinental R-975-46 Engine CoreLycoming R-680-17 Engine Core,

Complete w/Exhaust(2) Lycoming R-680 Engine Cores,

Damaged

RADIAL ENGINE ACCESSORIES

MAXIMAT V10 VERTICAL LATHE PEXTO 137-K SHEAR SOUTHBEND MODEL A LATHE K&F METAL CUTTING BAND SAW CRAFTSMAN 10" TABLE SAW RANDALL PT1 PRE-ORDER

BAND SAW CLAUSING LATHE CYLINDER WORKING BENCHESSIOUX MODEL 2001

VALVE FACE GRINDER POWR-KRAFT LATHE CLAUSING LATHEMANSUR MODEL

500 PARTS WASHER

LANDA PW-200 PARTS WASHER

APEX DISC GRINDER

CYLINDER HONING MACHINE

COLEMAN POWERMATE AIR

COMPRESSOR

LAGUN FTV-2 VERTICAL MILLING

MACHINE

EMCO MODEL FB-2 VERTICAL MILLING

MACHINE

CYLINDER WORKING STANDSENCO 14" BAND SAW

PACIFIC AIRMOTIVE VALVE GRINDER

REAMING FIXTURE

SIOUX MODEL 682 VALVE FACE GRINDER

SIOUX VALVE DRIVERS

CRAFTSMAN 20" DRILL PRESS WITH CYLINDER FIXTURE

LETEN LCM-450 BAND SAW

CRANKSHAFT WORKING FIXTURE

CAROLINA H-FRAME PRESS

H H H H H H H H H H H H H H H H H H H H H H H H H

H H H H H H H H H H H H H H H H H H H H H H H H H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

H

(Approx. 600) Manuals to Include Aircraft Maintenance & Parts, Engine & Props. Includes DC-3, DC-4, DC-6, DC-7, C-54, A-1 & A-4, T-28, T-6, T-33, PV-2, B-25, TBM-3, F8F-1, Martin B-26, B-17, S2F, C-119, S-58, H-37A, CH-53A. Most All the Curtis Wright & P&W Models, All Models of Hamilton Standard Props, Etc.

H H H CYLINDERS H H H H J-3 CUB INVENTORY H(Approx. 600) Curtis Wright

R-1820 Cylinder Cores Includes -56, -72, -86, -82, & -97

(125) P&W R-2000 Cylinder Cores

(40) P&W R-2800 Cylinder Cores, B-Series

(50) Curtis Wright R-2600 Cylinder Cores

CASES & CRANKSHAFTSLarge Selection of Curtis

Wright 1820 & 2600 Nose Cases, Main Cases, Intermediate Cases, Blower Cases, Accy. Cases

Misc. P&W R-2000 Cases(50) Curtis Wright 1820-97 &

-84 Crankshafts, Several w/Master Rod & Link Rod

Misc. Other CrankshaftsLarge Selection of Curtis

Wright Prop Shafts

(Approx. 175) Hamilton Standard Prop Blades to Include Blades for 23E50, 43D50, 34E60, 23D40, 24D50 Props. Blades for TBM’s, PV-2’s, B-17’s, C-54’s, S2F’s, Albatross, DC-4’s, DC-7’s, Etc.

Hamilton Standard Prop Parts Include Hubs for 2, 3, & 4 Blades, Cones, Spiders, Barrel Halves, Distributer Valves, Support Blocks, Shims, Pistons, Bearings, Domes, Blade Bearings, Etc.

H H RADIAL ENGINE H H INVENTORY

Very Large Selection of Inventory that will Include New, Some Overhauled, and As Removed. Majority of Inventory is Curtis Wright but also Includes P&W. Includes Master Rods, Camshafts, Large Selection of Link Rods, Curtis Wright 1820 & 2600 Pistons New & A/R, P&W Pistons New & Used, Very Large Selection of New Piston Rings Curtis Wright & P&W, New & A/R Valves, Several New Curtis Wright 3350 Valves, Large Selection of New Curtis Wright Valve Guides Including Cast Guides, New & A/R 1820 & 2600 Main Bearings, Large Selection of Curtis Wright Engine Hardware, Gaskets, Nose Case Rings, Bushings, Knuckle Pins, Roller Bearings, Blower Drive Shafts, Push Rods & Housings, Impellers, Super Charger Gears, Piston Pins, Rocker Arms, Crankshaft Counter Weights, Wire Looms, Reduction & Blower Gears, Valve Springs, Oil Sumps, Bearings & Bushings, Etc. If it Goes in a Radial Engine, it is Probably Here!!!

J-3 Top & Bottom CowlsJ-3 Cub Boot Cowl(2) J-3 Cub Engine Mounts

HARDWAREVery Good Selection of Hardware to Include AN, MS, NAS, Nuts, Bolts, Screws, Washers, Nut Plate, Jo Bolts, Bearings, AN Hyd Fittings, Adel Clamps, Turn Buckles, Rod Ends, Screws, Rivnuts, Dzus Fasteners, Cam Locks, Huck Rivets, Cherry Rivets, Solid Rivets, Etc.

ELECTRICAL INVENTORYCircuit Breakers, Toggle Switches, Canon Plugs, Regulators, Carbon Pile Regulators, Micro Switches, Capacitors, Large Selection of Mag & Ignition Switches, Etc.

RADIAL ENGINE EXHAUSTLarge Selection of Radial Engine ExhaustB-17 Exhaust

H H MISC. WARBIRD H H INVENTORY

B-25 & B-17 Brakes, B-17 Wing Tip, (2) A-26 Elevators, PV-2 Ailerons, Misc. B-17 Airframe Parts & Actuators, Various Other Actuators, Radial Engine Load & Dynafocal Mounts, (2) B-17 Engine Mounts, Bomb Drift & Hoist, Beech 18 Metal Flaps, Fuel Tanks, Seats, Vertical Stabilizers, B-17 Landing Gear Motors, Etc.

INSTRUMENTS & AVIONICS(Approx. 225) Instruments Including Altimeters, Know Ind., Rate

of Climbs, Fuel Pressure, Turn & Banks, 3-in-1 Gauges, Gyros, Compasses, Amp Gauges, Oil Pressure, Clocks, Etc.

Avionics Include: (5) KX-170B Nav Coms, KX-170A Nav Com, King KX-175B ADF, Air Com ACS-775 Switching Panels, Good Selection of Older Avionics.

H CABINETS, BENCHES H& SHELVES

Fireproof Cabinets, 2-Door Metal Cabinets, Good Selection of Wood & Metal Shop Benches, Several Sections of Wood & Metal Shelving.

H H H MANUALS H H H

H H PROP BLADES H H & INVENTORY

ZLIN ENGINES & INVENTORY(2) Walter Minor 6-111 EnginesWalter Minor 6-111 Engine Case

(2) Zlin Wing Tip TanksZlin Prop & Spinner

NOTE: FOR A COMPLETE DETAILED LISTING AND PHOTOS VISIT WWW.STARMANAUCTIONS.COM AND CLICK ON

UPCOMING AUCTIONS OR CALL (402) 592-1933.

PRSRT FIRST CLASSU.S. POSTAGEP A I DMAIL U.S.A.

PAYMENT TERMS: Cash, Certified Funds, or Company Check ONLY if accompanied by Bank Letter of Guarantee!! NO EXCEPTIONS! Wire Transfers will be accepted with a 20% non-refundable deposit day of sale in one of the forms listed above. We also accept MasterCard and Visa with an additional 3% Buyers Premium applicable. PROXY BIDS: If you are unable to attend this auction we will bid on your behalf. For more info visit our web site at www.starmanauctions.com and click on Upcoming Auctions and scroll down to the Proxy Bid Section. Complete form and fax to (402) 592-2327 or call Steve at (402) 681-6456.LOADING & REMOVAL: Once an item is sold the winning bidder is responsible for its removal. Any cost responsibility and risk of removal of purchases remain with the buyer. Removal may begin after payment in full and must be completed by the posted deadlines. NO EXCEPTIONS OR EXTENSIONS! There may be various trucking companies on site to arrange for transportation. However, it will be the buyer’s responsibility to arrange their own trucking.

Friday, June 1stAll Inventory, Engine Cores, Cylinders,

Any and All Types of Inventory.

Saturday, June 2ndHand Tools, Ramp Equipment,

Shop Equipment, Manuals.NOTE: At 1:00 P.M. on Saturday

the FLYING AIRCRAFT & AIRCRAFT PROJECTS will sell.

SALE ORDER

FLYING AIRCRAFT TERMSMust Be Cash or Certified Funds. A company check will be accepted ONLY with an IRREVOCABLE Letter of Credit From Your Bank. If a wire transfer or bank draft is used we need a 20% NONREFUNDABLE DEPOSIT Day of Sale via one of the above mentioned forms.

AUCTIONEER’S NOTE: Gene Packard, owner of Air Response, has decided to retire from the engine and aircraft overhaul business. He has therefore contracted with Starman Bros. Auctions, Inc., to liquidate all assets at Public Auction. In addition, we have added the assets of the estate of Sam Korth to this auction. Therefore, this auction will offer a VERY GOOD selection of Hand Tools, Shop Equipment, Radial Engine Inventory, as well as some Nice Aircraft.

Everything sells “AS IS, WHERE IS,” with no warranties implied or expressed. Neither the auctioneer nor owners shall be liable for any incorrect description, fault, or defect. Everything positively sells to the highest bidder. Payment must be made in full day of sale. No property removed until settled for. Auctioneer is not responsible for accidents or stolen property. All counts are approximate. Announcements made day of sale takes precedence over all printed material.

TWO DAYS ~ TWO OWNERS

4949 East Falcon Drive ~ Falcon Field Airport

MESA, ARIZONA 1240 Royal Drive • Papillion, NE 680464901 E. Falcon Drive • Mesa, AZ 85215

(402) 592-1933 • (480) 396-0380www.starmanauctions.com

Friday & Saturday June 1st & 2nd

Starting at 9:00 A.M. Both Days!