ABSOLUTE AUCTION

Reading, Pennsylvania

Morris Kreitz & Sons, Inc.

WEDNESDAY MARCH 15, 2017

9:00AM

COMPLETE LIQUIDATION

PRE-SORTEDFIRST CLASS MAIL

US POSTAGEPAID

HAVERTOWN, PAPERMIT #45

(3) OF (4) FORKLIFTS

`99 TEREX T340, 40 TON

`97 LIFT SYSTEMS 75MBL

`99 MACK CH613 AND `96 LANDOLL 50 TON1440 COWPATH RD. • HATFIELD, PA 19440215/361-9099 • Fax: 215/361-9212

www.hunyady.com

NEVER A BUYER’S PREMIUM!

PA Auction License No: AY000281 • While information is believed to be accurate, all items will be sold “As-Is, Where-Is” without guarantee or warranty. A physical inspection is suggested.

Morris Kreitz & Sons, Inc.

SALESITE

Notice: Morris Kreitz & Sons, Inc. has been in continuous operation for over 100 years. Throughout that time, they have focused their work and developed tradesmen in many industries, to include: Millwright; Rigging; Machinery Moving; Steel Erection; and Mechanical Construction. Beyond the major equipment and trucks offered in this auction, there are hundreds of tools and rigging supplies, which support these industries. The current owner has determined it is time to wind down this operation and liquidate all assets at absolute auction, to the highest bidder regardless of price, without minimums, reserves, or buyers premiums. Special Note: Due to the large volume of items to be sold, it will be necessary to sell with (2) auction rings selling simultaneously. Please plan accordingly. Contact Hunyady Auction, for information regarding the start time of the 2nd auction ring and inventory being sold.Location: Morris Kreitz facility located at 2 Oesterling Drive, Reading, PA 19605Sale Day Parking: There is extremely limited parking available around the auction site. We are currently working on securing a remote facility, however at time of print, that location has not been determined. Please visit our website for updated information regarding the location of the remote parking facility.Directions: FROM US ROUTE 222 and PA ROUTE 61 (North of Reading) – Take Route 61 North to 1st traffic light and turn RIGHT onto W. Huller Lane. Follow to end and turn LEFT onto Leesport Avenue. Take 1st RIGHT onto Oesterling Drive. Auction site is on Right. NOTE: There is a low bridge (7’10”) on W. Huller Lane – See note for alternate truck traffic.Truck Route: Trucks over 7’10”, BUT UNDER 11’7” can use Snyder Road off of Route 61, then turn RIGHT onto Leesport Avenue to auction site. All other truck traffic MUST use Business Route 222 to Leesport Avenue to auction site.Online Bidding: Live internet bidding will be provided by Proxibid. Proxibid will charge an Internet Service Provider Fee of 5% to the successful internet bidder for each lot purchased on-line over $10,000 and 10% on items $10,000 and less. All interested internet bidders are required to register w/Proxibid 24 hours prior to the auction at www.proxibid.com/hunyady or call 877-505-7770Terms: Payment in full is required on sale day by cash, certified funds, or check with a bank letter of guarantee. Sample letter of guarantee: “We hereby guarantee the payment of our customer ___________ written on his account up to __________ dollars for purchases at your auction sale on March 15, 2017” All guaranteed checks should be made payable to Hunyady Auction Co.Sales Tax: Since this contractor is selling items not normally sold in the course of his business, the Commonwealth of Pennsylvania considers this an isolated sale and does not require the auction company to collect sales tax.Financing: Financing is available, please contact Susan (215) 361-9099 at the auction company for details.Inspection: Items will be available for inspection beginning one week prior to the auction from 8:00AM to 4:00PM or sale day morning beginning at 7:00AM. This site will be closed Saturday and Sunday, March 11th and 12thRemoval: After complete payment, all sale items may be removed on sale day as long as the removal activity is not disruptive to the sale and only until 5:00PM. Items may also be removed Thursday and Friday, March 16th and 17th and Monday thru Wednesday, March 20th thru 22nd from 8:00AM until 4:00PM. All items must be removed no later than Wednesday, March 22, 2017 at 4:00PM

Sale Site Phone: (267) 446-3808 (beginning Monday, March 6) • Sale Site Fax: (888) 859-8958

Morris Kreitz facility located at 2 Oesterling Drive, Reading, PA 19605

Full Photo Library Available

HAND TOOLS

GENERAL CONTRACTING AND SHOP EQUIPMENT

Torque and Impact Wrenches: HYTORC Model MXT-3 Hydraulic Torque Wrench, with power pack • X-4 Corp Model TD2000, 8,000 ft/lb Torque Multiplier, 1-1/2” output/1” input drive, 4.6:1 ratio • INGERSOLL RAND 1-1/2” Pneumatic Impact Gun • (7) 1” Pneumatic Impact Guns • (4) 3/4” Pneumatic Impact Guns • (3) 3/4” Electric Impact Guns • (5) 1/2” Electric Impact Guns • Lg. Qty. Impact Sockets to 2-1/2” to 1-1/2” to 3/4” drivesSocket Sets and Wrenches: (3) ARMSTRONG 1” Drive, 1-1/8” – 3-1/2” Socket Sets • HUNDREDS of Sockets, Ratchets, and Extensions • HUNDREDS of Metric and SAE Combination Wrenches to 2-3/4” • Lg. Qty. Knock WrenchesHammer Drills: HILTI TE70 • HILTI TE40-AVR • HILTI TE25 • (2) HILTI TE22 • HILTI TE30 • HILTI TE14 • METABO KHED24 • (2) BOSCHSaws, Drills and Grinders: MILWAUKEE 8” Metal Cutting Circular Saw • (12) Porta-Band Saws • (10) Sawzalls • (30+/-) Electric Drills • (15) 9” Grinders; (15) 4-1/2” Grinders; (1) Die Grinder

GENIE Superlift SLA-25 Material Lift • GENIE SLC-18 Material Lift • (12) Pallet Jacks • (6) Banding Carts and Tools • HONDA EU6500, 6,500 Watt Generator, Honda gas engine, electric start (Meter Reads 103 Hours) • STIHL MS170 Chain Saw • (4) Gas and Electric Chain Saws • WORTHINGTON Electric Horizontal Shop Air Compressor, 7.5HP/3-phase • (2) Horizontal Band Saws • Compound Miter Saw • (2) Abrasive Chop Saws • (3) Bench Grinders • Large Quantity Hardware, Fasteners, and Clamps

ABSOLUTE AUCTION

NO MINIMUMS • NO RESERVES

HYDRAULIC CRANES AND FORKLIFTS1999 TEREX Model T340, 40 Ton Truck Crane, s/n 11077, Cummins diesel engine and Eaton Fuller 8LL transmission, 30’ to 94’ 4-section boom, telescopic jib to 143’, single hoist, LMI, 40 ton hook block and ball, mounted on model 428 tandem axle carrier, s/n 51174, with diamond plate decking, aluminum wheels, 425/65R22.5 front and 11R22.5 rear tires. In good condition with very good tires. (New Wire Rope) (Current Certification)

1998 BRODERSON Model IC-200-2A, 15 Ton Carry Deck Crane, s/n 179B, 4 cylinder diesel engine and shuttle transmission, 15’-36’ 3-stage boom, 15’ swing away jib, 15 ton 2-sheave hook block, 25’3” – 45’4” lift height (60’ with jib), enclosed cab, and 385/65R22.5 tires. In good condition with good tires. (Current Certification)

1,000 lb 2-Man Basket, 4’x4’ (Certified)

1999 SKYTRAK Model 8042-2, 8,000 lb Telescopic Rough Terrain Forklift, s/n 10878, Cummins B3.9C diesel engine and shuttle transmission, 3-stage boom, 42’ lift height, 6’ forks, 4-wheel steer, FOPS canopy, and 13.00-24 foam filled tires. In good condition with poor tires.

YALE Model C5-220-27, 20,000 lb Solid Tired Forklift, s/n C-15627, LPG engine and shuttle transmission, 2-stage mast, 10’10” lift height, 106” retracted height, 8’ forks, and FOPS canopy. In good condition.

YALE Model GC140SWT083, 15,000 lb Solid Tired Forklift, s/n P345742, LPG engine and shuttle transmission, 3-stage mast, 12’11” lift height, 84” retracted height, 8’ forks, and FOPS canopy. In good condition. (Rated @ 13,600 lb)

YALE Model GC150SWT083, 15,000 lb Solid Tired Forklift, s/n P237783, LPG engine and shuttle transmission, 3-stage mast, 12’4” lift height, 84” retracted height, 8’ forks, and FOPS canopy. In good condition. (Rated @ 14,000 lb)

1988 CATERPILLAR Model T100D, 10,000 lb Solid Tired Forklift, s/n 5MB1061, LPG engine and shuttle transmission, 3-stage mast, 12’6” lift height, 80” retracted height, 8’ forks, and FOPS canopy. In good condition.

1988 HYSTER Model S80XL, 8,000 lb Solid Tired Forklift, s/n D004V02439J, LPG engine and shuttle transmission, 3-stage mast, 14’5” lift height, 79” retracted height, 6’ forks. In good condition.

1998 HYSTER Model S60XM, 6,000 lb Solid Tired Forklift, s/n D187V12260V, LPG engine and hydrostatic transmission, 3-stage mast, 48” forks, side shift, 16’3” fork height, 86” retracted height, and FOPS canopy. In good condition.

2000 HYSTER Model E50XM2-33, 4,500 lb Electric Solid Tired Forklift, s/n F108V21348X, 48 volt DC, 3-stage mast, 16’4” lift height, 82” retracted height, side shift, 48” forks, and FOPS canopy. In good condition.

TCM Model FCG25NS, 5,000 lb Solid Tired Forklift, s/n 3180634, 4 cylinder LPG engine, 3-stage mast, 15’9” lift height, 76” retracted height, no forks. (Not Running)

2004 BARRETT Model WS-30-TL, 3,000 lb Walkie Forklift, s/n B-45-79940, 12 volt battery. In good to very good condition. (Meter Reads 2,376 Hours)

WALLACE 2,865 lb Telescopic Forklift Boom • Shopmade 10,000 lb Telescopic Forklift Boom

`99 TEREX T340, 40 TON

`88 CAT 10,000 LB

`98 HYSTER 6,000 LB

`04 BARRETT 3,000 LB

`88 HYSTER 8,000 LB

`00 HYSTER 4,500 LB

`98 BRODERSON 15 TON

`99 SKYTRAK 8042-2, 8,000 LB

YALE 20,000 LB

YALE 15,000 LB

YALE 15,000 LB

READING, PENNSYLVANIA

WEDNESDAY, MARCH 15, 2017 – 9:00AM

MOBILE BOOM LIFT AND GANTRY LIFT SYSTEM

TRUCK TRACTORS AND TRAILERS

1997 LIFT SYSTEMS Model 75MBL Mobile Boom Lift, s/n MBL075019, Cummins B3.9-P diesel engine and hydrostatic transmission, 75/50 ton 3-stage boom, 50 ton and 25 ton hook blocks, extendable counterweight, (2) pocket counterweights, and (2) slab counterweights. In good condition. (Meter Reads 2,255 Hours) (Current Certification)

1985 RIGGERS E-Z Lift, 600 Ton Gantry Lift System, s/n 10532 (from list), 480 volt input power, (2) 4’x10’ lifting bases with power travel, (4) 3-stage cylinders per base, 9’6” to 28’ lift height, automatic leveling, capacities: 600 ton 1st stage, 400 ton 2nd stage, and 300 ton 3rd stage. In good condition.

1999 MACK Model CH613 Tri-Axle Truck Tractor, Mack E-7, 427 diesel engine and Eaton Fuller 8LL, 10 speed transmission, 40,000 lb rears and 12,000 lb front axle, engine brake, air slide 5th wheel, single frame, air ride suspension, aluminum headache rack, aluminum fenders, cruise control, air conditioning, and 11R22.5 tires. In good condition with good tires.1997 MACK Model CH613 Tandem Axle Truck Tractor, Mack E-7, 350 diesel engine and Mack T2090, 9 speed transmission, 40,000 lb rears, engine brake, air slide 5th wheel, single frame, air ride suspension, cruise control, air conditioning, and 11R22.5 tires. In fair to good condition with good tires. (Front End Damage; Bumper, Hood, Headlights) 1996 LANDOLL Model 317-3-48, 50 Ton, 48’ Tri-Axle Roll-Back Trailer, gas pony motor, 34’x8’6” steel deck, hydraulic winch (no rope), 9’ upper deck, and (2) hydraulic stabilizers. In good condition with good tires. (Un-laden 19,380/GVWR 100,000 lb) 1990 TRAIL-EZE Model RS35H42, 35 Ton Tandem Axle Hydraulic Tail Trailer, gas pony motor, 24’x8’6” fixed deck, 8’ hydraulic tail deck, 7’8” upper deck, headache rack, hydraulic winch, 40,000 lb in 10’, 42’ overall length, 10R17.5 tires, and 84,560 lb GVWR,. In good condition with good tires. 1990 TRAIL-EZE Model RS35H42, 35 Ton Tandem Axle Hydraulic Tail Trailer, gas pony motor, 24’x8’6” fixed deck, 8’ hydraulic tail deck, 7’8” upper deck, headache rack, hydraulic winch, 40,000# in 10’, 42’ overall length, 10R17.5 tires, and 84,560 lb GVWR. In good condition with good tires.

Gantry Beams: (2) 45’ (450 lb/ft) and (2) 25’ (450 lb/ft), lifting clips: (6) 2” thick, (8) 1” thick, and (6) 1” original style

2011 SPANCO 10 Ton Traveling Gantry Crane, s/n 111425, 460 volt, 3-phase, Harrington 10 ton hoist, 19’9” height to top of beam, 40’ wide overall, 39’ 2-1/2” wheel center, power travel, and umbilical remote. In very good condition.

(2) 1999 and 1998 TRANSCRAFT 48’ Spread Axle Step Deck Trailer, 35 ton capacity, 37’ lower deck, 11’ upper deck, 8’6” width, and air ride suspension. In good condition with good tires.

1963 ROGERS Model THRG/OD76 Tandem Axle Double Drop Extendable Lowboy Trailer, ground bearing detachable gooseneck, 21’-33’ extending load deck, 8’ width, 8’10” open deck over wheels, 22” deck height, gas pony motor, outriggers, chain dogs, and 11R22.5 tires. In good condition with good tires.

1965 TALBERT Model TDF-30-35-45-T1, 35’ - 45’ Tandem Axle Extendable Step Deck Trailer, 35 ton capacity, 26’x8’ lower and 8’6” upper deck, 42” and 56” deck height. In fair condition.

1977 FONTAINE Model TP-3-4065SL, 40’ – 65’ Tandem Axle Extendable High Flatbed Trailer. In good condition.

1966 ROGERS HFT35X-3, 40’ Tandem Axle Extendable Flatbed Trailer, In fair to poor condition. (Not Roadable)

(2) 1996 GREAT DANE 48’ Tandem Axle Flatbed Trailers. In fair to good condition • (2) 40’ Tandem Axle Flatbed Trailers. In fair condition • 5th Wheel Dolly. In good condition.

`97 LIFT SYSTEMS 75MBL

`99 MACK CH613

TALBERT EXTENDABLE STEP DECK`96 LANDOLL 50 TON

`90 TRAIL-EZE 35 TON HYDRAULIC TAILS

ROGERS DOUBLE DROP EXTENDABLE

`77 FONTAINE EXTENDABLE

(1) OF (2) `96 GREAT DANE 48’

`90 TRAIL-EZE 35 TON HYDRAULIC TAILS

(1) OF (2) TRANSCRAFT 48’ SPREAD AXLES

GANTRY BEAMS

`85 RIGGERS EZ LIFT 600 TON `11 SPANCO 10 TON

NO MINIMUMS • NO RESERVES

NEVER A BUYER’S PREMIUM!

DUMP AND STAKE BODY TRUCKS

VEHICLES

AIR COMPRESSORS, STORAGE BUILDING, CONTAINERS, AND TRAILERS

UTILITY TRUCKS, PICKUPS, AND TRAILER1999 CHEVROLET Model 3500, 4x4 Mason Dump, Vortec 5.7L gas engine and automatic transmission, Heil 8’ landscape dump body, Curtis 9’ snow plow package, dual rear wheels, and 255/75R16 tires. In good condition with fair to good tires. (20,844 Original Miles)

1999 GMC Model C6500 Stake Body Truck, Cat 3126, 210HP diesel engine and 6 speed transmission, 24’ flatbed with stake sides, dual rear wheels, hydraulic brakes, spring suspension, and 11R22.5 tires. In good condition with very good tires.

1997 GMC Model C6500 Stake Body Truck, 6.0L gas engine and automatic transmission, Reading 16’ stake body with electric lift gate, spring suspension, hydraulic brakes, air conditioning, and 11R22.5 tires. In good condition with good tires.

2016 FORD Explorer XLT, 4x4, 4-Door SUV, 3.5L gas engine and automatic transmission, leather interior, full power package, alloy wheels, and 245/50R18 tires. In good to very good condition. (29,750 Miles)

2013 JEEP Grand Cherokee Laredo 4x4, 4-Door SUV, 3.6L gas engine and automatic transmission, leather interior, full power package, and alloy wheels. In good condition with good tires.

2007 CHEVROLET 4x4, 4-Door Suburban LT, Vortec 5.3L gas engine and automatic transmission, full power package, leather interior, front bucket seats, 3rd row seating, alloy wheels, air conditioning, and 265/70R17 tires. In good condition with good tires. (New/Rebuilt Engine Installed with 6,000 Miles)

(2) 1988 CP Model CPS130, 130CFM Portable Air Compressors, s/n CE11941 and s/n CE11435, Isuzu diesel engines. In fair to good condition.

32’ L x 11’3” W x 8’6” H Explosion Proof Storage Building, with (3) doors, explosion proof lighting, sprinkler system, and gas heat • (5) 8’x20’ Overseas Containers • (5) 40’ Storage Trailers

2005 GMC Sierra 3500 Utility Truck, Duramax 6.6L diesel engine and automatic transmission, Reading 9’ open utility body with material rack, dual rear wheels, air conditioning, and 215/85R16 tires. In good condition with good tires.

2001 GMC Model 3500SL Utility Truck, Duramax diesel engine and automatic transmission, Reading open utility body, dual rear wheels, and air conditioning. (Not Running – Needs Injectors) (Transmission Weak)

2008 FORD Model F-250XL Super Duty Pickup Truck, 5.4L gas engine and automatic transmission, 8’ bed with material rack, air conditioning. In good condition with good tires.

2006 GMC Sierra 2500HD Pickup Truck, diesel engine and automatic transmission, 8’ bed. In fair to good condition.

2008 FORD Model F-150 Extended Cab Pickup Truck, gas engine and automatic transmission, 8’ bed with cross-box. In good condition with good tires.

2008 CHEVROLET Model 1500 Silverado Extended Cab Pickup Truck, Vortec 4.6L gas engine and automatic transmission, 6’6” bed with spray liner, cross toolbox, air conditioning, and 265/70R17 tires. In good condition with very good tires.

2006 CHEVROLET Model 1500 Pickup Truck, 4.3L gas engine and automatic transmission, 8’ bed with spray liner, material rack, air conditioning, and 245/70R17 tires. In good condition with good tires.

2008 FORD Ranger Extended Cab Pickup Truck, 2.3L gas engine and automatic transmission, 6’ bed with spray liner, side boxes, 50 gallon fuel cell, cruise control, air conditioning, and 235/75R15 tires. In good condition with good tires.

2008 CHEVROLET Colorado Extended Cab Pickup Truck, gas engine and automatic transmission. In good condition with good tires.

2005 CHEVROLET Model Colorado 4x4 Crew Cab Pickup Truck, Vortec 3500 gas engine and automatic transmission, 5’ bed with liner, power windows and locks, and air conditioning. In good condition with good tires.

2007 LEGEND 7’x12’ Tandem Axle Enclosed Utility Trailer, aluminum frame, curbside door. In good condition.

`99 CHEVY 3500 4X4

`16 FORD EXPLORER XLT 4X4

(2) `88 CP 130CFM

`07 CHEVY SUBURBAN LT 4X4

`05 GMC SIERRA 3500

`99 & `97 GMC C6500

`13 JEEP GRAND CHEROKEE 4X4

`08 FORD F-250XL

`08 CHEVY 1500 SILVERADO

`08 FORD RANGER

`05 CHEVY COLORADO 4X4

`07 LEGEND UTILITY TRAILER

NEVER A BUYER’S PREMIUM!

WEDNESDAY, MARCH 15, 2017 – 9:00AM

MACHINERY MOVING, JACKING AND RIGGING

PIPE FITTING & PIPE TOOLS

LADDERS, SCAFFOLDING AND GANG BOXES

MASONRY TOOLS

WELDERS, PLASMA CUTTERS & ACCESSORIES(30) 8’x20’x1” Steel Plate, very good condition

A&A SCALES Model LP22K Low Profile Portable Truck Scale, 30,000 lb per pad/60,000 lb per axle, set of (4) pads and (2) digital readout systems with printers, in cases.

Jacking: OTC Hydraulic Power Pack, with (4) valve manifold • (3) ENERPAC Hydraulic Power Packs • (2) ENERPAC 150 Ton Manual Jacks • (4) 50 Ton & 25 Ton Toe Jacks • (50+/-) Jacking Rams, 100 ton – 5 ton • (15+/-) Railroad Jacks, 35 ton – 10 ton • (25+/-) Hydraulic Hand Pumps • (2) Electric Johnson Bars • (5) Wood Johnson Bars • (2) Air Tuggers

Machinery Skates: 2006 HOVAIR Model SAK34-4, 40,000# Air Castor System, (4) 10,000 lb castors, hose, and hardware. In very good condition • AMITAL 16-Wheel Steerable, 48,000 lb • (12) AMITAL 8-Wheel, 26,400 lb • (2) AMITAL 8-Wheel, 24,000 lb • (4) AMITAL 6-Wheel, 19,800 lb • (12) AMITAL 4-Wheel Swivel, 8,800 lb/each • (2) AMITAL 4-Wheel Swivel, 13,200 lb/each • (6) HEAVY HAUL 6-Wheel, 40,000 lb, steel wheel • (20) HEAVY HAUL 4-Wheel, 12,000 lb, steel wheel • (16) HILMEN 15,000 lb, steel wheel with handles

Leveling and Measuring: (2) BRUNSON Model 771-H Jig Transits and Rolling Tripods • WILD HEERBRUGG N3 High Accuracy Precision Level • K&E Optical Level • KERN Level • (8) STARETT No. 98 Machinist Levels • DAVID WHITE Transit • SOKKIA B20 Level • DEWALT DW090 Level • BOSCH Rotary Level • STARETT 11-Caliper Measuring Set, to 12” • STARETT Calipers, Inside Micrometers, Depth Gauges, and Levels • BUBBLE Levels and Straight Edges • Shim Sets

Lifting and Rigging: Retractable Life Lines, Harnesses and Rescue Systems • HARRINGTON 1/2 Ton Electric Hoist, 110V • HITACHI 2-Ton Electric Hoist, 220V • Large Quantity 25 Ton – 1/2 Ton Chain Falls; Chain Hoists; Cable Come-A-Longs • Beam Trolleys; Snatch Blocks; Beam Clamps • Large Quantity Shackles, 75 Ton – 3 Ton • Large Quantity Endless Slings; Cable Slings and Chokers; 2-Way and 4-Way Spreaders; Spreader Beams; Lifting Jigs

GREENLEE 855 Smart Bender • RIDGID 1224 Power Threader • (3) RIDGID 535 Power Threaders • (5) RIDGID 300 Power Threaders • Threader Heads, 2-1/2” to 4” • CHRISTIE Butt Fusion Machine, s/n D0097, 120 volt, 4” to 8”, on cart • ESCO Millhog Pipe Beveler, 3/4” to 4-1/2” • (4) Magnetic Drill Presses • (1) Magnetic Rotabroach • Pipe Hole Hawg • RIDGID HC-300 Pipe Drill • Lg. Qty. Manual Threaders and Heads • Power Head Drive Shafts • Hydraulic and Manual Soil Pipe Cutters • (50+/-) Pipe Cutters: 4” to 6”; 2” to 4”; 1” to 3” • Reamers • (100+/-) RIDGID 48” to 12” Pipe Wrenches • (20+/-) Tri-Stands • (40+/-) Pipe Stands • (35+/-) Roller Stands • Jewel Clamps

Extension Ladders: 60’ Aluminum • 40’ Fiberglass Extension Ladder • (5) 32’ Fiberglass • (5) 24’ Fiberglass • 20’ Fiberglass • (2) 10’ FiberglassStep Ladders: 16’ Fiberglass • (9) 12’ Fiberglass • (5) 10’ Fiberglass • (4) 8’ Fiberglass Scaffold and Pics: (10+/-) Scaffold Sets with Cross Braces • (2) 28’x20” Pic Boards • 20’x20” Pic Board • 25’x12” Pic BoardGang Boxes: (40+/-) Clamshell Gang Boxes on casters • (20+/-) Rectangle Gang Boxes, some on casters

MILWAUKEE Core Drill, with stand and vacuum • HILTI DD130 Core Drill, with DWP10 vacuum pump • BLACK & DECKER Core Drill, with stand • MILWAUKEE Core Drill • Core Bits to 12” • (6) Concrete Vibrators • Electric Mortar Mixer, with poly tub • Electric Mortar Mixer, with steel tub • Mortar Pans, Finish Tools, and Mortar Mix • WACKER Magic Electric Paving Breaker • (5) Pneumatic Paving Breakers • (7) Pneumatic Chipping Hammers • Hammer Steel

Diesel/Gas Powered: ’08 MILLER Trailblazer 302 Portable Welder/Generator, s/n LJ090044Q, Kubota diesel engine, 300 amp welder/9,500 watt generator, on single axle trailer (2,023 Hours) • ‘10 MILLER Bobcat 250 Welder/Generator, s/n MA110795H, gas engine, 250 amp welder/11,000 watt generator, on cart • MILLER Bobcat 225G Welder/Generator, s/n KG242859, Onan gas engine, 225 amp welder/8,000 watt generator, on cart (3,492 Hours) • MILLER Legend AEAD-200LE, 225 Amp Welder/Generator, s/n KA791751, Onan gas engine, 5,500 watt generator, on cart (Runs Rough) • MILLER Trailblazer 302 Portable Welder/Generator, Kubota diesel engine, on single axle trailer (Not Running; Needs Kick-Up Switch and Board to maintain Constant Current When Welding)

Multi Packs: MILLER Mark VIII-2, 8-Pack DC Welding Power Source, s/n JF916472, 200 amp output, 230/460 volt input • MILLER XMT304 CC/CV, 6-Pack Welding Source, DC Inverter Arc Welder, 300 amp • MILLER XMT304, 4-Pack DC Inverter Arc Welder, 300 amp • MILLER 304 Series, 4-Pack DC Inverter Arc Welder, 300 amp • RED-D-ARC 4-Pack, 275 amp

TIG and MIG: MILLER Syncrowave 250, 250 Amp Tig Welder, s/n KF805590, with Bernard 2 gallon water cooler • AIRCO Dip Pak 250 Mig Welder, with wire feed • AIRCO Dip Pak 200 Mig Welder, with wire feed • (3) HOBART Hefty CC/CV Suitcase Welders • (2) MILLER CP-250TS, 250 Amp Welders, with Miller wire feeders • LINCOLN Idealarc DC-400, 400 Amp, with wire feeder • LINCOLN SP125, 125 Amp Mig Welder, 110 volt • (4) Tig Torch Sets

Arc/Stick: (10) MILLER SRH-444, 400 Amp Constant Current Welders • (9) MILLER SRH-222, 200 Amp DC Welders • (2) MILLER SRH-303, 300 Amp DC Welders • MILLER 330A-BP High Frequency AC/DC Welder • MILLER Maxstar 140 Handheld Stick Welder, 115 volt

Plasma Cutters: HYPERTHERM Powermax 1100 Plasma Cutter, 30-80 Amp • HYPERTHERM Max 40, 40 Amp Plasma Cutter • DYNAPAK 4XI, 40 Amp Plasma Cutter

Accessories: (8) Round Horizontal Rod Ovens • (10) Stand Up Rod Ovens • Welding Rod Inventory • Fabricating Stock: Plate; Bar; Tube; Square in Stainless and Mild Steel • Large Quantity Unused and Used Oxygen/Acetylene Gauges and Torches, hose and carts • Bottle Cages • Lg. Qty. Welding Lead and Power Cord • Temporary Power Panels • (100+/-) C-Clamps

STEEL PLATE

RIDGID 1224 MAGNETIC DRILL PRESSES

MULTI PACK WELDERS

(2) BRUNSON 771-H

TIG AND MIG WELDERS