Upload
doancong
View
217
Download
0
Embed Size (px)
Citation preview
ABS Robusta light drainage pump 200 and 300
* Robusta is fitted with an automatic level control. For trans-portable applications, the Hand-Auto switch can be changed to continuous operation.
* The checkvalve built into the discharge outlet blocks return-flow from the discharge line when the pump is switched off.
* Checkvalve, hose adaptor and 10 m cable with Europlug included as standard.
* Suitable for small sumps (from 300 x 300 mm).* Detachable suction ring. When fitted into the impeller screen
allows pumping down to 3 mm (manual operation only).
Plug-in, submersible pump, for the removal of wastewater containing solids up to 10 mm, in accordance with EN 12050-2.
ApplicationThe Robusta 200 and 300 series has been designed for fixed or transportable installation, and for internal or external applica-tions such as emptying containers and drainage pits, draining of swimming pools or flooded cellars, and removal of nuisance water from gullies or pedestrian underpasses.
Construction* Single-phase, 50 Hz, 2-pole motor; insulation class B; protec-
tion type IP 68. Motor is dynamically balanced with stainless steel shaft. Thermal sensors in the stator switch off the pump in the case of overheating and automatically switch it back on after cooling down.
* The stainless steel rotor shaft is supported in lubricated-for-life ball bearings.
* Connection chamber with cover and watertight cable inlet and strain relief.
* Discharge outlet with internal thread, built-in checkvalve, and detachable multi-stage hose adaptor.
* Shaft sealing is by three lip seals, single at the motor side and double at the medium side, separated and lubricated by a grease chamber.
* The medium being pumped flows around the motor hous-ing for optimum heat dissipation. The maximum allowable medium temperature is 40 °C; or up to 60 °C for intermittent usage (max 5 minutes).
* Built-in automatic level control, with easily removable float cover for cleaning purposes.
* Integrated switch for continuous operation in transportable applications.
* Bayonet clamping allows the screen to be removed by hand in the event an impeller inspection is necessary.
Materials
Description Material
Pump Casing PP
Motor Shaft Stainless steel 1.4028 (AISI 420)
Impeller PA
Seals NBR
Cable Neoprene
Features
InstallationAttention to the backwash level is of vital importance for effec-tive dewatering. All outflow points located below the backwash level must be protected against back flow according to stand-ard EN 12056.
Type testedand monitored
1. Backwash level2. Baskwash loop with base above the backwash level
Robusta 300
Robusta 200
0 3.5
0
1
3.02.52.01.51.00.5
2
3
4
5
6
7
8
9
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
50 Hz
H(m)
Q(m3/h)
(l/s)
¾“
R ¾“
1“
H = Total head; Q = Discharge volumeCurves to ISO 9906 (60 Hz available on request)
Robusta WTS 200 300
Discharge connectioninternal thread
G 1¼” G 1¼”
Solids size (mm) 10 10
Motor power * (kW) P1 = 0.36 P1 = 0.50
Rated voltage (V) 220-240 1~ 220-240 1~
Rated current (A) 1.6 2.2
Cable type (H07RN-F) 3G1.0 3G1.0
Cable length ** (m) 10 10
Weight (kg) 3.8 4.4
Auto-switching (mm) On: levels Off:
145 50
165 75
Hose Adaptor
Accessories
Description Part no.
Gate Valve (brass)with internal thread G 1¼”
14040005
Non-return Valve (synthetic) G 1¼”flap valve with internal thread, PA-1-3082
61400511
Non-return Valve (EN-GJL-250) G 1¼”ball valve with internal thread
61400525
Performance Curves
*P1 = Power taken from mains.**For external applications the following VDE regulation applies: Submersible pumps for use externally must have a fixed cable connection with a length of at least 10 m. Regula-tions vary by country.
A Robusta 200 304Robusta 300 324
51.5
G 1¼”
195
ø157
A
Dimensions (mm)
Technical Data
Description Part no.Plug-in Alarm for DIN type socket 230 VAudible alarm with alarm diode, cancel buttonand potential-free fault output. Supplied withloading unit for mains-independent operation.
16020201
Alarm-contact Float KS 5 = 5 m(KS float switch) KS 10 = 10 m
6245001662450017
NC Batteries 9VTR 7-8for mains independent operation
12820018
Control Unit for double pumping station.Automatic changing of the start sequence,alarm, and potential-free fault indicator.
ContactABS
201
0-03
-02
| We
rese
rve
the
righ
ts to
alt
er s
peci
ficat
ions
due
to te
chni
cal d
evel
opm
ents
.
ELETTROPOMPE SOMMERGIBILI PER DRENAGGIOLe elettropompe sommergibili girante aperta della lineaVENEZIA® sono state realizzate utilizzando i più moderni esofisticati sistemi di progettazione d’ingegneria e designindustriale. La particolare forma, l’interruttore difunzionamento automatico integrato, la possibilità dilavorare anche parzialmente immersa, la totale assenza diviti, i particolari polimeri compositi utilizzati, rendono leVenezia® una delle pompe più innovative e tecnologicamenteavanzate presenti sul mercato. Le VENEZIA® sono state progettate per il pompaggio diacque pulite, reflue, non aggressive per i materiali dellapompa, con temperatura max. del liquido fino a 35 °C (CEI EN 60335-2-41). Le VENEZIA® possono lavorare ancheparzialmente sommerse.
IMPIEGHIIdeali per un utilizzo in impianti di emergenza eprosciugamento di piccoli ambienti allagati, smaltimentoacque domestiche usate in locali sotterranei, svuotamento dipozzetti, vasche e piscine, piccola irrigazione digiardini/orti, giochi d’acqua in fontane.Le Venezia 300 e 500 possono aspirare fino a 2 mm.
SUBMERSIBLE DRAINING ELECTRIC PUMPSThe submersible draining pumps with open impeller of theseries VENEZIA® have been developed with the most advancedand sophisticated engineering and industrial design systems.The particular form, the integrated automatic switch, thepossibility to operate also if partially submerged, the totalabsence of screws and the particular compound polymers used,make Venezia® one of the most innovative and technologicaladvanced pumps available on the market.The VENEZIA® have been design to pump clear water, wastewater or slightly dirty water, but not aggressive for the pump’smaterials, with liquid temperature not higher than 35 °C. (CEI EN 60335-2-41). The VENEZIA® may work also partiallyimmerged.
APPLICATIONSBest uses: in emergency systems and for dewatering smallareas, domestic underground waste water, emptying out sumppits, tanks and pools, small irrigation in vegetable garden, forfountains and waterfalls. The Venezia version 300 & 500 may suck up to 2 mm.
CARATTERISTICHE COSTRUTTIVE• Corpo pompa,testata e base filtro: Syntegum 1720• Girante: in Dynaril • Supporto cuscinetti: in alluminio pressofuso UNI 5076• Corpo motore: in acciaio inox Aisi 304 • Albero pompa: in acciaio inox Aisi 420F• Tenuta meccanica lato pompa: carbone ceramica• Tenuta meccanica lato motore: a labbro in NBR• 10 m cavo alimentazione tipo H05RN-F con spina Schuko • Immersione max. 5 m
Motore• Motore ad induzione a due poli, riavvolgibile, refrigerato
dal liquido pompato, con protezione IP68, isolamentoclasse F.
• Alimentazione monofase con motoprotettore incorporatoe condensatore permanentemente inserito.
• Servizio continuo.
“Venezia®”
TECHNICAL FEATURES• Pump body, outer motor casing and base filter: Syntegum 1720• Impeller: in Dynaril • Bearings bracket: in die casting aluminium UNI 5076 • Motor body in stainless steel: Aisi 304 • Pump shaft: stainless steel: Aisi 420F• Pump’s side mechanical seal: carbon-ceramics• Motor’s side seal: lip ring in NBR• 10 m H05RN-F feeding cable with Schuko plug • Max. immersion 5 m
Motor• Two poles induction rewindable motor, cooled by the
pumped liquid, with protection IP68, class F insulation.• Single-phase feeding with incorporated motor protector
and capacitor permanently connected.• Continuous duty.
300-500
TOP RANGE 76
� Innovativa nel design e nei materialibrevetto internazionale
� Valvola di non ritorno integrata� Galleggiante integrato� Prestazioni eccezionali� Connettore estraibile a tenuta stagna
con innesto rapido
� Innovation design and materialinternational Patent
� Built in non return valve� Built in float switch� Exceptional performance� Quick cable coupling watertight
connector
77
“VENEZIA”DATI PRESTAZIONALI - PERFORMANCE DATA
6.4 6.1 5.8 5.4 4.6 3.7 2.7 2.18.5 8.2 7.9 7.5 6.7 5.9 4.9 4.4 3.4 2.310.9 10.6 10.3 10.0 9.3 8.5 7.7 7.2 6.3 5.4 4.3 3.2 2.112.4 12.0 11.6 11.2 10.4 9.6 8.8 8.3 7.5 6.6 5.7 4.8 3.9 2.1 1.2
0 0.6 1.2 1.8 3 4.2 5.4 6 7.2 8.4 9.6 10.8 12 14.4 16.80 10 20 30 50 70 90 100 120 140 160 180 200 240 280
Portata - Capacity
Prevalenza (m C.A.) Total head (m W.C.)
H [m]
Q [m3/h]Q [l/1']
kW HP a [μF] 1~ 230 VVenezia 300 0.26 0.35 310 6.3 1.4Venezia 500 0.37 0.5 430 8 2Venezia 700 0.51 0.7 580 12.5 2.5Venezia 900 0.59 0.8 720 14 3.2
TIPO Potenza Potenza Condensatore Corrente assorbitaTYPE nominale assorbita Capacitor Input current
Monofase Nominal Input 450 V maxSingle-phase power power [A]
[W]
a) ~ Monofase 230 V
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
H m
Venezia 300 Venezia 500 Venezia 700Venezia 900
0
5
10
15
20
25
30
20 40 60 80 100 120 140 160 180 200 220 240 260 280 300
EFFICIENCY
Venezia 300Venezia 500
Venezia 700
Venezia 900
Q (l/min)
0 Q (m3/h) 18161412108642
Q (US g.p.m.)
Q (lmp g.p.m.)
7240 48 56 643224168
40 48 56 643224168
H ft
10
30
40
20
%
CARATTERISTICHE COSTRUTTIVE• Corpo pompa,testata e base filtro: Syntegum 1720• Girante: in Dynaril • Supporto cuscinetti: in alluminio pressofuso UNI 5076• Corpo motore: in acciaio inox Aisi 304 • Albero pompa: in acciaio inox Aisi 420F• Tenuta meccanica lato pompa: carbone ceramica• Tenuta meccanica lato motore: a labbro in NBR• 10 m cavo alimentazione tipo H07RN-F con spina Schuko • Immersione max. 5 m
Motore• Motore ad induzione a due poli, riavvolgibile, refrigerato
dal liquido pompato, con protezione IP68, isolamentoclasse F.
• Alimentazione monofase con motoprotettore incorporatoe condensatore permanentemente inserito.
• Servizio continuo.
“Venezia® Vortex” ELETTROPOMPE SOMMERGIBILI PER DRENAGGIO Le elettropompe sommergibili a girante aperta della serieVENEZIA® Vortex, sono state realizzate utilizzando i piùmoderni e sofisticati sistemi di progettazione d’ingegneria edesign industriale. La particolare forma, l’interruttore difunzionamento automatico integrato, la possibilità dilavorare anche parzialmente immersa, la totale assenza diviti, i particolari polimeri compositi utilizzati, rendono leVenezia® una delle pompe più innovative e tecnologicamenteavanzate presenti sul mercato.Le VENEZIA® Vortex sono state progettate per il pompaggiodi acque reflue, sporche o luride, non aggressive per imateriali della pompa, con temperatura max. del liquido finoa 35 °C. (CEI EN 60335-2-41). Massimo passaggio libero dicorpi solidi fino Ø 25 mm. Le VENEZIA® Vortex possonolavorare anche parzialmente sommerse.
IMPIEGHIIdeali per il drenaggio di liquidi anche luridi con corpi solidiin sospensione, smaltimento acque usate in locali ocontenitori sotterranei, svuotamento di pozzetti di raccolta.
SUBMERSIBLE DRAINING ELECTRIC PUMPSThe submersible draining pumps with open impeller of theseries VENEZIA® Vortex have been developed with the mostadvanced and sophisticated engineering and industrial designsystems. The particular form, the integrated automatic switch,the possibility to operate also if partially submerged, the totalabsence of screws and the particular compound polymers used,make Venezia® one of the most innovative and technologicaladvanced pumps available on the market.The VENEZIA® Vortex have been design to pump waste water,dirty water or sewage water, but not aggressive for the pump’smaterials, with liquid temperature not higher than 35 °C. (CEI EN 60335-2-41). Max. free passage of suspended solidsup to Ø 25 mm. The VENEZIA® Vortex may work also partially immerged.
APPLICATIONSBest uses for draining dirty liquids and sewage with suspendedsolids, domestic underground dirty waste water, emptying outsump pits and septic tanks.
TECHNICAL FEATURES• Pump body ,outer motor casing and base filter: Syntegum 1720• Impeller: in Dynaril • Bearings bracket: in die casting aluminium UNI 5076 • Motor body in stainless steel Aisi 304 • Pump shaft: stainless steel Aisi 420F• Pump’s side mechanical seal: carbon-ceramics• Motor’s side seal: lip ring in NBR• 10 m H07RN-F feeding cable with Schuko plug • Max. immersion 5 m
Motor• Two poles induction rewindable motor, cooled by the
pumped liquid, with protection IP 68, class F insulation.• Single-phase feeding with incorporated motor protector
and capacitor permanently connected.• Continuous duty.
TOP RANGE 78
� Innovativa nel design e nei materialibrevetto internazionale
� Passaggio di corpi solidi ø 25 mm� Valvola di non ritorno integrata� Galleggiante integrato� Prestazioni eccezionali� Connettore estraibile a tenuta stagna
con innesto rapido
� Innovation design and materialinternational Patent
� Passage of solid bodies ø 25 mm� Built in non return valve� Built in float switch� Exceptional performance� Quick cable coupling watertight
connector
79
“VENEZIA VORTEX”DATI PRESTAZIONALI - PERFORMANCE DATA
6,2 5,8 5,3 5,0 4,2 3,6 2,9 2,7 2,1 1,7 1,3
8.9 8.5 8.0 7.6 6.7 5.9 5.0 4.6 3.8 3.0 2.2 1.4 0.7
0 0.6 1.2 1.8 3 4.2 5.4 6 7.2 8.4 9.6 10.8 120 10 20 30 50 70 90 100 120 140 160 180 200
Portata - Capacity
Prevalenza (m C.A.) Total head (m W.C.)
H [m]
Q [m3/h]Q [l/1']
kW HP a [μF] 1~ 230 VVenezia Vortex 525 0.37 0.5 440 8 2.1Venezia Vortex 925 0.59 0.8 610 14 2.7
TIPO Potenza Potenza Condensatore Corrente assorbitaTYPE nominale assorbita Capacitor Input current
Monofase Nominal Input 450 V maxSingle-phase power power [A]
[W]
a) ~ Monofase 230 V
Q (US g.p.m.)
Q (lmp g.p.m.)
36 40 44 48 52 563228242016 181284
24 28 32 36 40 44 4820161284
Q (l/min)
0 Q (m3/h) 14 1612108642
H ft
10
20
30
%
0
1
2
3
4
5
6
7
8
9
H m
Venezia 525
Venezia 925
5
10
15
20
20 40 60 80 100 120 140 160 180 200 220
Venezia 525
Venezia 925
EFFICIENCY
Temperatura liquido in prova come da direttiva CEI EN 60034-1 p15.2.4 & 60335-1 p11Limiti di prestazioni norme ISO 9906 ANNEX AStandard applicati per i test:EN 60335-1 1994 + ++; EN 60335-2-41
Liquid test temperature according toCEI EN 60034-1 p15.2.4 & 60335-1 p11Performances limits ISO 9906 ANNEX AApplied test standards:EN 60335-1 1994 + ++; EN 60335-2-41
“VENEZIA VORTEX”DATI DIMENSIONALI - DIMENSIONAL DATA
E = LIVELLO MINIMO ACQUA X FUNZIONAMENTO IN AUTOMATICO F = PASSAGGIO LIBEROE = MINIMUM WATER LEVEL FOR AUTOMATIC DUTY F = FREE PASSAGE
Venezia 300 355 325 175 270 120 Ø 2 1"1/4 430 280 230 5,3Venezia 500 355 325 175 270 120 Ø 2 1"1/4 430 280 230 5,7Venezia 700 400 365 175 270 120 Ø 9 1"1/4 430 280 230 6,6Venezia 900 400 365 175 270 120 Ø 9 1"1/4 430 280 230 7,8Venezia 525 Vortex 400 365 175 270 120 Ø 25 1"1/4 430 280 230 5,8Venezia 925 Vortex 400 365 175 270 120 Ø 25 1"1/4 430 280 230 7,8
A B C D E F DNM A L P
TIPO
TYPE
DIMENSIONI [mm]DIMENSIONS [mm]
IMBALLO [mm]PACKING [mm]
PESOWEIGHT
[kg]
A
D C
E
B
DNM
F
P
A
L
80
CARATTERISTICHE COSTRUTTIVE• Corpo pompa e girante: SUPLEN V 30 • Albero pompa e viti: acciaio inox Aisi 316 • Tenuta: a labbro in NBR
Motore• Motore a spazzole non adatto per servizio continuo.
“YACHT” POMPE DA SENTINALa pompa da sentina della serie “YACHT” è realizzata inspeciale materiale sintetico (polipropilene anti-idrocarburi eanti-urto).Velocità e facilità nell’installazione, nell’utilizzo e nellamanutenzione. Basso consumo e ottime portate.La “YACHT” viene fornita di base per fissaggio con 1 m dicavo elettrico.
IMPIEGHIIdeali per svuotamento di piccole cisterne o sentine dellebarche, possono anche essere usate in piccoli impiantid’emergenza
BILGE PUMPSThe bilge pumps of the series “YACHT” are entirelymanufactured in special crash, rust and hydrocarbons proofpolypropylene.Very easy to be cleaned and installed, this pump is suppliedwith 1 meter cable, fastening bottom cover and instructionmanual for correct use.
APPLICATIONSBest uses in empting small tanks and bilges of boats, can beused also in small emergency systems.
TECHNICAL FEATURES• Pump body and impeller: SUPLEN V 30• Pump shaft & screws: stainless steel Aisi 316 • Seal: lip seal NBR
Motor• Brush motor not suitable for continuous duty.
YACHT 12V. 65W. 99 160 27 30 180 110 110 0.93YACHT 24V. 65W. 99 160 27 30 180 110 110 0.93YACHT MAXI 12 V. 100W. 99 195 27 30 240 110 110 1.83YACHT MAXI 24V. 100W. 99 195 27 30 240 110 110 1.83
F H H2 DNM A L P
TIPO
TYPE
DIMENSIONI [mm]DIMENSIONS [mm]
IMBALLO [mm]PACKING [mm]
PESOWEIGHT
[kg]
H2
DNM
H
FP
A
L
100
101
“YACHT”DATI PRESTAZIONALI - PERFORMANCE DATA
0
1
2
3
4
5
10 20 30 40 50 60 70 80
H m
YACHT
YACHT MAXI
Q (l/min)
0 Q (m3/h) 4321
Q (US g.p.m.)
Q (lmp g.p.m.)
2015105
15105
3 2.65 2.15 1.5 0.853 2.65 2.15 1.5 0.854 3.6 3.1 2.75 2.1 1.8 1 0.34 3.6 3.1 2.75 2.1 1.8 1 0.3
0 0.6 1.2 1.8 2.4 3 3.6 4.20 10 20 30 40 50 60 70
Portata - Capacity
Prevalenza (m C.A.) Total head (m W.C.)
H [m]
Q [m3/h]Q [l/1']
[V] [W] [min-1]YACHT 12 12 65 4200 4.2YACHT 24 24 65 4200 2.6YACHT MAXI 12 12 100 4200 6YACHT MAXI 24 24 100 4200 3.5
TIPO Volt Potenza Giri Corrente assorbitaTYPE assorbita Input current
Volt Input RPMpower [A]
Temperatura liquido in prova come da direttiva CEI EN 60034-1 p15.2.4 & 60335-1 p11Limiti di prestazioni norme ISO 9906 ANNEX AStandard applicati per i test:EN 60335-1 1994 + ++; EN 60335-2-41
Liquid test temperature according toCEI EN 60034-1 p15.2.4 & 60335-1 p11Performances limits ISO 9906 ANNEX AApplied test standards:EN 60335-1 1994 + ++; EN 60335-2-41
6®
DAB PUMPS reserve the right to make modifications without prior notice
NOVA - FEKASUBMERSIBLE PUMPS FOR DRAINAGE AND WASTE WATERFOR DOMESTIC USE
GENERAL DATAApplicationsThe submersible pump from the NOVA series is designed mainly for automatically operated fixedapplications in domestic use, draining basements and garages which are subject to flooding.Thanks to its compact, easy to handle form, it may also be used as a portable pump for emergencies suchas lifting water from tanks or rivers, emptying swimming pools, fountains, excavations and underpasses. Itis also ideal for gardening and hobbies in general.The submersible pump from the FEKA series has been designed for lifting sewage from cesspools and iscapable of draining suspended solids with dimensions up to 25 mm.The level switch allows fixed installation and guarantees automatic pump operation.Available also with special stainless steel motor shaft version (SV).
Constructional features of the pumpWater-resistant technopolymer pump body, impeller, top body and suction grid.Stainless steel motor, rotor shaft and screws.Triple O-ring seals interposed with oil chamber.
Constructional features of the motorContinuous duty submersible induction motor. Stator fitted in an airtight stainless steel casing covered by atop body which contains the cabling, microswitch and capacitor. Rotor mounted on oversized greasedsealed-for-life ball bearings to ensure silent running and long life. Built-in thermal and current overloadprotection and a capacitor permanently in circuit in the single-phase version. Three-phase motors shouldbe protected with a suitable overload protection complying with the regulations in force.Manufactured according to CEI 2-3 and CEI 61-69 standards (EN 60335-2-41).Motor protection: IP68Insulation class: FStandard voltage: single-phase 220-240 V/50 Hz
three-phase 400 V/50 HzStandard cables for the single-phase version:
5 metres H05 RN-F NOVA 180 M-A - NOVA 300 M-A NOVA 600 M-A - FEKA 600 M-A
10 metres H05 RN-F NOVA 180 M-NA - NOVA 200 M-NA10 metres H07 RN-F NOVA 600 M-NA - FEKA 600 M-NA
Standard plug for the single-phase version: SCHUKO CEE 7 - VII - UNEL 47166-68Standard cables for the three-phase version: 5 metres H07 RN-F
7®
DAB PUMPS reserve the right to make modifications without prior notice
NOVA 600 - FEKA 600NOVA 180 - NOVA 300
- Operating range: from 1 to 16 m3/h with head up to 10,2 metres- Liquid quality requirements: NOVA cloudy water without fibres
FEKA sewage from cesspools- Free passage of solids through the suction grid: NOVA 180 - NOVA 200 5 mm
NOVA 300 - NOVA 600 10 mmFEKA 600 25 mm
- Minimum draught depth: NOVA 180 77 mmNOVA 200 - NOVA 180 NA 8 mmNOVA 300 85 mmNOVA 600 A - FEKA 600 A 175 mmNOVA 600 NA - FEKA 600 NA 48 mm
- Liquid temperature range: from 0°C to +35°C for domestic use (EN 60335-2-41)- Maximum immersion depth: 7 metres- Maximum dry running time: 1 minute- Installation: fixed or portable in a vertical position
TECHNICAL DATA
MODELNOVA 180NOVA 200NOVA 300NOVA 600FEKA 600
- Minimum pit dimensions for fixed installation with automatic operation:
WITH FLOAT (A)YESNOYESYESYES
WITHOUT FLOAT (NA)YESYESNOYESYES
29
54
78
1
83
4
32
79
N.14293254
787983
PARTS*PUMP BODYIMPELLEROR GASKETSTOP RINGMOTOR: TOP BODY
ROTOR SHAFT
PRESSURE DISC (FOR NOVA)SUCTION GRIDFLOAT
MATERIALSTECHNOPOLYMER TECHNOPOLYMER NBR12E - UNI 7435 STAINLESSSTAINLESS STEEL AISI 304X5 CrNi 1810 - UNI 6900/71STAINLESS STEEL AISI 416X12 CrS13 - UNI 6900/71FOR SV SHAFT VERSIONSTAINLESS STEEL AISI 431TECHNOPOLYMER TECHNOPOLYMER TECHNOPOLYMER
* In contact with the liquid
8®
DAB PUMPS reserve the right to make modifications without prior notice
VOLTAGE50 Hz
1x220-240 V ∼ 190 0,20 0,28 0,9 5 450 H(m)
P1MAX
W
InA
P2NOMINAL
kW HP
CAPACITOR
μF Vc
Qm3/hl/min
4,8
Q00
4,2
Q1,220
3,5
Q2,440
2,4
Q3,660
1,4
Q4,880
MODEL
NOVA 180 M
ELECTRICAL DATA HYDRAULIC DATA (n ∼ 2850 1/min)
VOLTAGE50 Hz
1x220-240 V ∼ 350 0,22 0,3 1,5 8 450 H(m)
P1MAX
W
InA
P2NOMINAL
kW HP
CAPACITOR
μF Vc
Qm3/hl/min
6,6
Q00
5,2
Q3
50
4,6
Q4,575
4
Q6
100
3,2
Q7,5125
2,6
Q9
150
1,4
Q12200
MODEL
NOVA 200 M-NA
ELECTRICAL DATA HYDRAULIC DATA (n ∼ 2850 1/min)
The performance curves are based on the kinematic viscosity values = 1 mm2/s and density equal to 1000 Kg/m3. Curve tolerance according to ISO 9906.
NOVA 180
NOVA 200
A B C D E H H1 H2 LEV.MIN.
LEV.MAX DNM
181
148
235
148
46
46
296
–
82
82
253
253
345
–
38
38
77
–
277
–
11/4”G
11/4”G
287
287
202
202
320
320
0,019
0,019
4,6
4,5
MODEL
NOVA 180 M-A
NOVA 180 M-NA
PACKING DIMENSIONS
L/A L/B HVOLUME
m3WEIGHT
Kg
A
148
B
148
C
46
E
82
H
253
H2
38
DNM
11/4” G 4,50,019320202287
MODEL
NOVA 200 M-NA
PACKING DIMENSIONS
L/A L/B HWEIGHT
KgVOLUME
m3
Q m3/h0 2 4 6 8 10 120 0
4
8
12
16
18
0
0
0
Q l/s
Q l/min
Q IMP gpm
Q US gpm
0
0
1 2 3
40 80 120 160 200
Hm
Hft
PkPa
110
220
330
440
550
660
770
5 10 15 20 25 30 35 40 45 50
5 10 15 20 25 30 35 40 45
Q m3/h00 0
2
4
6
8
10
12
14
16
0
0
0 4 8 12 16 20
4 8 12 16
1 2 3 4 5
Q l/s
Q l/min
Q IMP gpm
Q US gpm
0
0 20 40 60 80
0,5 1 1,5
Hm
Hft
PkPa
110
220
330
440
550
* Available also with special stainless steel motor shaft version (SV).
* Available also with special stainless steel motor shaft version (SV).
NOVA 180
NOVA 200
9®
DAB PUMPS reserve the right to make modifications without prior notice
NOVA 600
VOLTAGE50 Hz
1x220-240 V ∼ 355 0,22 0,3 1,6 8 450 H(m)
P1MAX
W
InA
P2NOMINAL
kW HP
CAPACITOR
μF Vc
Qm3/hl/min
6,8
Q00
5,6
Q3
50
5,1
Q4,575
4,6
Q6
100
4
Q7,5125
3,4
Q9
150
2,7
Q10,8180
2,2
Q12
200
1,7
Q13,02217
MODEL
NOVA 300 M-A
ELECTRICAL DATA HYDRAULIC DATA (n ∼ 2850 1/min)
VOLTAGE50 Hz
1x220-240 V ~
3x400 V ~
800
800
0,55
0,55
0,75
0,75
3,4
1,6
14
–
450
–
H(m)
P1MAX
W
InA
P2NOMINAL
kW HP
CAPACITOR
μF Vc
Qm3/hl/min
10,2 8,9 8,3 7,8 7,2 6,6 5 3,1 2,3
Q00
Q3
50
Q4,575
Q6
100
Q7,5125
Q9
150
Q12
200
Q15250
Q16,2270
MODEL
NOVA 600 M
NOVA 600 T
ELECTRICAL DATA HYDRAULIC DATA (n ∼ 2850 1/min)
The performance curves are based on the kinematic viscosity values = 1 mm2/s and density equal to 1000 Kg/m3. Curve tolerance according to ISO 9906.
NOVA 300
A B C D E H H1 H2 LEV.MIN.
LEV.MAX DNM
181 235 46 296 82 262 354 47 85 285 11/4”G 287 202 320 0,019 4,6
MODEL
NOVA 300 M-A
PACKING DIMENSIONS
L/A L/B HVOLUME
m3WEIGHT
Kg
A B C D E H H1 H2 LEV.MIN.
LEV.MAX DNM
193
162
235
160
56
56
296
–
90
90
368
368
443
–
73
73
190
–
390
–
11/4”G
11/4”G
287
287
202
202
431
431
0,025
0,025
7
6,7
MODEL
NOVA 600 M-A
NOVA 600 (M-T)-NA
PACKING DIMENSIONS
L/A L/B HVOLUME
m3WEIGHT
Kg
B
E
DN
M
H2
A
C
H
Q m3/h0 2 4 6 8 10 12 14 160
2
4
6
8
10
0
5
10
15
20
25
30
0
00
Q l/sQ l/min
Q IMP gpmQ US gpm
0
0
1 2 3 4
50 100 150 200 250
Hm
Hft
PkPa
20
40
60
80
100
10 20 30 40 50 60 010 20 30 40 50
Q m3/h0 2 4 6 8 10 120 0
4
8
12
16
18
0
0
0
Q l/s
Q l/min
Q IMP gpm
Q US gpm
0
0
1 2 3
40 80 120 160 200
Hm
Hft
PkPa
110
220
330
440
550
660
770
5 10 15 20 25 30 35 40 45 50
5 10 15 20 25 30 35 40 45
* Available also with special stainless steel motor shaft version (SV).
* Available also with special stainless steel motor shaft version (SV).
NOVA 300
NOVA 600
10®
DAB PUMPS reserve the right to make modifications without prior notice
The performance curves are based on the kinematic viscosity values = 1 mm2/s and density equal to 1000 Kg/m3. Curve tolerance according to ISO 9906.
FEKA 600
VOLTAGE50 Hz
1x220-240 V ~
3x400 V ~
1000
970
0,55
0,55
0,75
0,75
4,3
1,7
14
–
450
–
H(m)
P1MAX
W
InA
P2NOMINAL
kW HP
CAPACITOR
μF Vc
Qm3/hl/min
7,45 6,45 6,1 5,7 5,35 4,95 4,1 2,8 2,2
Q00
Q350
Q4,575
Q6
100
Q7,5125
Q9
150
Q12200
Q15250
Q15,9265
MODEL
FEKA 600 M
FEKA 600 T
ELECTRICAL DATA HYDRAULIC DATA (n ∼ 2850 1/min)
A B C D E H H1 H2 LEV.MIN.
LEV.MAX DNM
193
162
235
160
56
56
296
–
90
90
368
368
443
–
73
73
190
–
390
–
11/4”G
11/4”G
287
287
202
202
431
431
0,025
0,025
7
6,7
MODEL
FEKA 600 M-A
FEKA 600 (M-T)-NA
PACKING DIMENSIONS
L/A L/B HVOLUME
m3WEIGHT
Kg
B
E
DN
M
H2
A
C
H
Q m3/h0 2 4 6 8 10 12 14 160
1
2
3
4
5
6
7
0
4
8
12
16
20
0
00
Q l/sQ l/min
Q IMP gpmQ US gpm
0
0
1 2 3 4
50 100 150 200 250
Hm
Hft
PkPa
10
20
30
40
50
60
70
10 20 30 40 50 60 010 20 30 40 50
* Available also with special stainless steel motor shaft version (SV).
FEKA 600